Trabajos industrial safety en Deer Park, New YorkCrear alertas

Job Description Master Plumber (ID# 660) Full-Time | Multiple Locations Nationwide About Our Client - Our Client is a fast-growing, full-service plumbing franchise company. We provide expert residential, commercial, and industrial plumbing, drain, and sewer solutions with same-day service and 24/7 emergency availability. Our team of certified professionals is committed to quality workmanship, upfront pricing, and outstanding customer care. Position Overview We are seeking a licensed Master Plumber to join our growing team. In this role, you will lead plumbing projects from start to finish, mentor apprentice and journeyman plumbers, and serve as the technical authority on job sites. You will be the face of Our Client — delivering the five-star service our customers count on. Key Responsibilities • Inspect, install, repair, and maintain plumbing systems including pipes, fixtures, sewers, drains, water heaters, and gas lines, • Diagnose plumbing issues and develop effective, code-compliant solutions, • Lead and mentor apprentice and journeyman plumbers on job sites, • Read and interpret blueprints, schematics, and building specifications, • Ensure full compliance with local, state, and federal plumbing codes and safety regulations, • Provide upfront pricing estimates and communicate clearly with customers, • Respond to emergency service calls as needed, including nights and weekends, • Maintain accurate records of work performed, parts used, and time on site, • Coordinate with dispatchers and project managers to ensure timely job completion Qualifications • Active Master Plumber license in the state of employment (required), • Minimum 5 years of plumbing experience, including journeyman-level work, • Strong knowledge of residential, commercial, and emergency plumbing systems, • Ability to read blueprints and technical specifications, • Excellent customer communication and problem-solving skills, • Valid driver's license and clean driving record, • Ability to lift up to 75 lbs and work in confined spaces or at heights Compensation • Base salary: $75,000 – $95,000 per year, depending on experience and location, • Top earners (high-demand markets): up to $118,000+, • Hourly equivalent: $36 – $46/hour, • Overtime and emergency call pay available (1.5x–2x standard rate), • Performance-based bonuses Benefits • Medical, dental, and vision insurance, • Paid time off and holidays, • Company-provided vehicle or vehicle allowance, • Uniforms and equipment supplied, • Ongoing training and professional development, • Career advancement opportunities Why Our Client? We invest in our people. Whether you're looking to grow into a leadership role or simply want a stable, well-paying career doing the work you love, Our Client offers the support, technology, and reputation to help you thrive.

Job Description Journeyman Plumber (ID# 661) Full-Time | Multiple Locations Nationwide About Our Client Our Client is a fast-growing, full-service plumbing franchise. We provide expert residential, commercial, and industrial plumbing, drain, and sewer solutions with same-day service and 24/7 emergency availability. Our team of certified professionals is committed to quality workmanship, upfront pricing, and outstanding customer care. Position Overview We are seeking a licensed Journeyman Plumber to join our growing team. In this role, you will work independently on a wide range of residential and commercial plumbing projects, supervise apprentices, and deliver the high-quality service our customers depend on. This is a great opportunity to grow your career within a nationally recognized organization. Key Responsibilities • Install, repair, and maintain plumbing systems including pipes, fixtures, drains, sewers, water heaters, and gas lines, • Diagnose plumbing issues and execute effective, code-compliant solutions, • Work independently on residential and commercial job sites with minimal supervision, • Supervise and guide apprentice plumbers on assigned projects, • Read and interpret blueprints, schematics, and technical specifications, • Ensure compliance with local, state, and federal plumbing codes and safety standards, • Communicate clearly with customers and provide upfront pricing estimates, • Respond to emergency service calls as needed, including evenings and weekends, • Maintain accurate job records including work performed, parts used, and time on site, • Coordinate with dispatchers and Master Plumbers to ensure timely project completion Qualifications • Active Journeyman Plumber license in the state of employment (required), • Minimum 3–5 years of plumbing experience, including completion of a recognized apprenticeship program, • Solid knowledge of residential and commercial plumbing systems, • Ability to read blueprints and technical documents, • Strong customer communication and problem-solving skills, • Valid driver's license with a clean driving record, • Ability to lift up to 75 lbs and work in confined spaces or at heights Compensation • Base salary: $60,000 – $79,500 per year, depending on experience and location, • Top earners (high-demand markets): up to $92,500+, • Hourly equivalent: $29 – $38/hour, • Overtime and emergency call pay available (1.5x–2x standard rate), • Performance-based bonuses, • Clear path to Master Plumber advancement Benefits • Medical, dental, and vision insurance, • Paid time off and holidays, • Company-provided vehicle or vehicle allowance, • Uniforms and equipment supplied, • Ongoing training and professional development, • Career advancement opportunities Why Our Client? We invest in our people. Whether you're looking to advance to Master Plumber status or build a long-term career in a stable, high-demand trade, Our Client provides the tools, training, and support to help you get there.

Job Description Apprentice Plumber (ID# 662) Full-Time | Multiple Locations Nationwide About Our Client Our Client is a fast-growing, full-service plumbing franchise. We provide expert residential, commercial, and industrial plumbing, drain, and sewer solutions with same-day service and 24/7 emergency availability. Our team of certified professionals is committed to quality workmanship, upfront pricing, and outstanding customer care. Position Overview We are seeking a motivated Apprentice Plumber to join our growing team. This is an excellent opportunity to launch your plumbing career by learning hands-on from experienced Journeyman and Master Plumbers in a supportive, fast-paced environment. You will earn while you learn, gaining the real-world skills and training needed to advance toward your Journeyman license. Key Responsibilities • Assist Journeyman and Master Plumbers with the installation, repair, and maintenance of plumbing systems including pipes, fixtures, drains, sewers, and water heaters, • Perform basic plumbing tasks such as pipe cutting, fitting assembly, and fixture installation under direct supervision, • Transport tools, equipment, and materials to and from job sites, • Maintain a clean, organized, and safe work environment on all job sites, • Follow all safety protocols, building codes, and company procedures, • Support senior plumbers with emergency service calls as needed, • Complete required classroom or technical training as part of an apprenticeship program, • Maintain accurate records of work performed and materials used, • Communicate professionally with customers and team members Qualifications • High school diploma or GED required, • Enrollment in or willingness to enroll in a licensed plumbing apprenticeship program, • Basic mechanical aptitude and eagerness to learn the trade, • Ability to follow instructions and work effectively as part of a team, • Strong work ethic, reliability, and punctuality, • Valid driver's license with a clean driving record, • Ability to lift up to 75 lbs and work in confined spaces, at heights, or outdoors in varying weather conditions, • Prior construction, maintenance, or trade experience a plus but not required Compensation • Base salary: $34,000 – $47,500 per year, depending on experience and location, • Hourly equivalent: $16 – $23/hour, with increases as apprenticeship milestones are met, • Top earners in high-demand markets: up to $56,500+, • Overtime pay available (1.5x standard rate), • Pay increases tied to apprenticeship progression Benefits • Medical, dental, and vision insurance, • Paid time off and holidays, • Company-provided vehicle or vehicle allowance, • Uniforms and equipment supplied, • Paid on-the-job training, • Tuition/apprenticeship program support, • Clear career path to Journeyman and Master Plumber, • Career advancement opportunities Why Our Client? We believe in building careers from the ground up. As an Apprentice Plumber with Our Client, you'll gain the hands-on experience, mentorship, and structured training needed to grow into a highly skilled, well-compensated plumbing professional — all while earning a competitive wage from day one.

Job Description Charles Ross & Son Company | Hauppauge, New York Charles Ross & Son Company, a leader in the design and manufacture of industrial mixing and blending equipment, is seeking a reliable and detail-oriented full-time Mechanic/Assembler to join our growing team. In this position, you will construct, assemble, and test industrial equipment and components using a variety of tools and equipment. The ideal candidate will demonstrate strong mechanical aptitude, a commitment to quality, and the ability to perform work accurately while maintaining close attention to detail. Duties and Responsibilities • Review, analyze, and follow blueprints, diagrams, engineering drawings, procedures, and work instructions., • Assemble mechanical components, parts, and finished equipment according to specifications., • Conduct quality assurance checks to ensure assembled products meet required specifications and quality standards., • Identify product defects and assembly issues and document and report them as necessary., • Repair and adjust components and equipment to accommodate specification changes and resolve assembly problems., • Perform preventative maintenance and routine checks on equipment and tools to ensure proper operation., • Complete required quality, production, and other documentation accurately., • Monitor and maintain necessary materials and supplies at the workstation., • Maintain a clean, safe, and organized work area., • Travel as needed to customer locations to service and support equipment in the field., • Perform all work in accordance with established quality and safety standards and procedures. Qualifications • Ability to read and interpret blueprints, hand-drawn sketches, engineering drawings, and verbal instructions., • Strong mechanical aptitude and attention to detail., • Must possess basic personal tools, including wrenches, sockets, dial calipers, and dial indicators., • Ability to accurately work with fractional and decimal measurements and perform basic mathematical calculations, including addition, subtraction, multiplication, and division., • Ability to perform visual inspections of parts and assemblies., • Experience using precision measuring instruments to accurately inspect dimensions., • Welding experience with steel and stainless steel is a plus., • Ability to troubleshoot mechanical and assembly-related issues. Education and Experience • High school diploma or equivalent required., • Trade school certification or an Associate's degree is a plus., • Previous experience in a manufacturing or industrial production environment preferred. What We Offer • Medical insurance, • Dental and vision insurance, • Vacation and PTO policy, • Paid holidays, • Positive and collaborative work environment Interested candidates should submit their resume to Employment@mixers.com

Job Description Job Summary: Will diagnose commercial roof leaks & make appropriate repairs. Lead in roof maintenance & small repair jobs. Responsible for paperwork, timesheets and ensuring All-Star Roofing, Inc. safety Policies are being followed. Work is available year-round- Most employees have been with us for several years Candidate Requirements: • Minimum of two (2) or more years’ experience in Commercial Roofing, • Working knowledge of commercial/industrial roofing procedures and safety, • Provide Roof Maintenance and Repairs, • Knowledge of removal and installation of all types of roof systems including BUR, Modified Bitumen, TPO, EPDM, PVC and slope (tile/shingles, • Maintain professional interaction with all customers., • A valid state driver’s license (in good standing); Have reliable transportation., • Able to lift 50 lbs. & climb up and down ladders to minimum heights of 25 feet, • Able to work occasional weekends.\nCompany Description Local Commercial Roofing Company in business for over 30+ years. Looking for Reliable Mechanic to join our team Local Commercial Roofing Company in business for over 30+ years. \r\nLooking for Reliable Mechanic to join our team

Job DescriptionBenefits/Perks • Flexible Schedule, • Competitive Pay, • Career AdvancementJob SummaryWe are seeking an experienced Mason to join our team. In this role, you will restore old brick and block and install new. You will use a combination of modern power tools and traditional hand tools. The ideal candidate has a proven track record as a skilled Mason and a love of the craft. Responsibilities • Use hand tools and power tools to perform basic construction tasks, • layout of brick walls, door openings, set loose lintels, • set precast sills, • corefill block wallsQualifications, • Previous experience as a Mason or in a similar position, • OSHA certificate required, • experience working on scaffolds and lifts, • Strong attention to detail, • Excellent hand-eye coordination, • Ability to adhere to all safety rules and regulations, • Knowledge of power tools and industrial machinery is preferred

Job Description Local Class A CDL Driver Company: Shea Trucking LLC Location: West Babylon, NY (174 Cabot Street) Job Type: Full-Time, W2 Employee Shift: Early Morning Start (5:00 AM – 6:00 AM) About Shea Trucking For over 50 years, Shea Trucking has been Long Island’s premier air and ocean freight specialist. As a family-owned and operated business, we don't treat our drivers like a truck number—our owners run the day-to-day operations right alongside the team. We have built an unmatched reputation for reliability across Nassau, Suffolk, and Queens counties, and we are looking for professional, dependable Class A drivers to grow with us. Why Drive with Shea? (Compensation & Benefits) We offer a stable, transparent, and highly competitive pay structure with exceptional long-term security. • Hourly Pay: $26.00 per hour., • Overtime: Time-and-a-half ($39.00/hr) paid daily after 8.5 hours., • Medical Coverage: Full medical benefits kicking in after just 3 months of employment., • Retirement Security: A fully funded Pension Plan at $0 cost to you after 1 year of service., • Home Daily: This is a 100% local driving position. You will be home every single night. The Work • Routine: Mostly Drop & Hook operations. Freight handling is rare, keeping your focus on the road rather than heavy lifting., • Variety: Enjoy a change of scenery. You will handle dynamic, different routes each day running between our West Babylon hub, local industrial areas, regional airports, and ocean ports., • Schedule: Reliable morning start times between 5:00 AM and 6:00 AM. What We Are Looking For • Valid Class A Commercial Driver’s License (CDL-A)., • Clean driving record and solid commitment to safety., • Dependable, punctual, and professional work ethic., • TWIC® Card or SeaLink Card: Having these is a major plus! (Please note: A TWIC/SeaLink card is strictly required if you are assigned to container work at the ports). To Apply If you are looking for a reliable, local driving career with an established company that truly invests in your future via premium healthcare and a free pension, we want to hear from you. Apply today to join the Shea Trucking family!

Job Description About Us MAX USA Corp is a leading manufacturer of professional-grade construction and industrial tools, serving customers across North America. Known for innovation, quality, and durability, our products include rebar tying tools, pneumatic nailers, and power-driven fastening systems. We are committed to helping professionals across multiple industries improve productivity and safety on the job. As part of the global MAX Group, we combine a rich history of engineering excellence with a forward-thinking approach to growth and customer satisfaction. Position Overview We are seeking a results-driven Regional Sales Associate to support and grow our sales presence within the Northern California and Northern Nevada territory. This individual will implement sales strategies, build dealer and contractor relationships, and represent MAX at job sites, events, and trade shows. This is a field-based role requiring regular travel, strong communication skills, and a proactive approach to territory development. Key Responsibilities Sales & Business Development Visit jobsites to demonstrate MAX products directly to contractors with distributor involvement. Seek out new distributor partners as needed within the territory. Implement MAX sales programs and promotions including RBU program. Attend and support trade shows, industry events, and distributor open houses. Cover other territories on an as-needed basis. Account Management Maintain strong relationships with current dealers: Train inside and outside sales staff on MAX products and features. Merchandise retail locations using signage, point-of-purchase displays, stickers, and posters. Identify key sales personnel to target for training and promotional efforts. Conduct jobsite visits alongside customers to reinforce product value. Ensure timely follow-up to customer requests. Make bi-weekly calls to each key account. Partner with Office Manager to assist with collections on past due accounts. Reporting & CRM Usage Use CRM tools (Salesforce.com preferred) daily to: Track interactions with customers and distributors. Monitor sales pipeline and bonus eligibility. Submit timely reports: Expense reports Dealer visit summaries Trade show reports Confirmation and thank-you letters to customers Product Support & Collaboration Coordinate with engineering teams to test products in the field. Provide feedback from jobsites and distributors to support product development. Contribute to the design and implementation of promotions and marketing initiatives. Complete special projects as assigned by management. Qualifications Education Bachelor’s degree in Business or a related field, or equivalent combination of education and work experience. Experience Proven experience in outside sales, ideally with a manufacturer or industrial equipment company. Experience in developing pricing strategies, executing sales promotions, and training customers and staff. Proficiency in Microsoft Office Suite (Excel, Word, Outlook, PowerPoint) required. Familiarity with Salesforce.com or comparable CRM platforms preferred. Physical & Travel Requirements Frequent travel within the assigned territory. Ability to lift and carry tools and equipment to and from jobsites or trade shows. Physical ability to set up and dismantle displays at events and open houses. Overnight travel as required.

Job Description About Us MAX USA Corp is a leading manufacturer of professional-grade construction and industrial tools, serving customers across North America. Known for innovation, quality, and durability, our products include rebar tying tools, pneumatic nailers, and power-driven fastening systems. We are committed to helping professionals across multiple industries improve productivity and safety on the job. As part of the global MAX Group, we combine a rich history of engineering excellence with a forward-thinking approach to growth and customer satisfaction. Position Overview We are seeking a results-driven Regional Sales Associate to support and grow our sales presence within the Tennessee, Mississippi, and Alabama area. This individual will implement sales strategies, build dealer and contractor relationships, and represent MAX at job sites, events, and trade shows. This is a field-based role requiring regular travel, strong communication skills, and a proactive approach to territory development. Key Responsibilities Sales & Business Development • Visit jobsites to demonstrate MAX products directly to contractors with distributor involvement., • Seek out new distributor partners as needed within the territory., • Implement MAX sales programs and promotions including RBU program., • Attend and support trade shows, industry events, and distributor open houses., • Cover other territories on an as-needed basis. Account Management • Maintain strong relationships with current dealers:, • Train inside and outside sales staff on MAX products and features., • Merchandise retail locations using signage, point-of-purchase displays, stickers, and posters., • Identify key sales personnel to target for training and promotional efforts., • Conduct jobsite visits alongside customers to reinforce product value., • Ensure timely follow-up to customer requests., • Make bi-weekly calls to each key account., • Partner with Office Manager to assist with collections on past due accounts. Reporting & CRM Usage • Use CRM tools (Salesforce.com preferred) daily to:, • Track interactions with customers and distributors., • Monitor sales pipeline and bonus eligibility., • Submit timely reports:, • Expense reports, • Dealer visit summaries, • Trade show reports, • Confirmation and thank-you letters to customers Product Support & Collaboration • Coordinate with engineering teams to test products in the field., • Provide feedback from jobsites and distributors to support product development., • Contribute to the design and implementation of promotions and marketing initiatives., • Complete special projects as assigned by management. Qualifications Education • Bachelor’s degree in Business or a related field, or equivalent combination of education and work experience. Experience • Proven experience in outside sales, ideally with a manufacturer or industrial equipment company., • Experience in developing pricing strategies, executing sales promotions, and training customers and staff., • Proficiency in Microsoft Office Suite (Excel, Word, Outlook, PowerPoint) required., • Familiarity with Salesforce.com or comparable CRM platforms preferred. Physical & Travel Requirements • Frequent travel within the assigned territory., • Ability to lift and carry tools and equipment to and from jobsites or trade shows., • Physical ability to set up and dismantle displays at events and open houses., • Overnight travel as required. Salary: 70k - 95k commensurate with experience and qualifications

Job Description Core Responsibilities: -Inspect, repair, and maintain electrical systems, including wiring, panels, switches, outlets, lighting fixtures, generators, UPS, PDUs, primary switchgear, and emergency backup systems. -Diagnose and resolve issues such as power outages, faults, short circuits, and malfunctioning equipment; perform necessary troubleshooting, testing, and repairs. -Install or modify electrical systems and components during renovations and upgrades. -Conduct preventive maintenance, testing (e.g., grounding, insulation), and record-keeping per schedules, manufacturer guidelines, and NEC standards. -Ensure compliance with electrical/building codes, NFPA, OSHA, and safety standards; inspect emergency lighting, fire alarm interfaces, and life safety systems. -Log work orders, track metrics, and report on activities using department software. -Collaborate with team members and contractors; provide technical support and supervise electrical contractor work as needed. -Perform minor related trade tasks (e.g., demolition, patching, painting, cleanup) to complete electrical assignments. -Attend at least 2-3 professional training sessions annually, including IUOE Local 30 courses. -All other duties as assigned. • Proficient in electrical safety procedures (NFPA 70E and OSHA), • Must have at least 4 years of commercial/industrial experience in the electrical trade., • Ensure all work complies with NEC standards and local building codes., • Shows the ability to work with and around High Voltage up to 13.2 KVA, • Install, maintain, adjust, operate, test and repair branch circuits, power distribution wiring, electrical equipment, fixtures, lighting systems, and conduit in compliance with the National Electric Code (NEC)., • Lead and supervise electrical installations on construction sites, including commercial and industrial projects, • Experience with 208V three-phase , 208V single-phase , 120/240V , 208/240V, 480 Volt 3 phase circuitry ., • Availability – available for emergency calls 24hrs 7 days per week ., • Proficiency in NEC code, designing, installing, and maintaining electrical systems., • Strong problem-solving/troubleshooting, deep mechanical and electrical knowledge, excellent customer service/communication, attention to detail, and time management, • Read and interpret blueprints, schematics, and technical drawings to determine the layout of Electrical systems.

Job Description$33-38/hr Position Summary We are seeking experienced Carpenters to support facilities operations and maintenance at a government facility in King's Point, NY. The Carpenter will perform skilled carpentry, repair, installation, and general maintenance work throughout the campus in support of facility operations along with other general maintenance tasks. This position requires an experienced tradesperson capable of independently completing carpentry assignments while maintaining a safe, professional, and high-quality work environment within a federal facility. Key Responsibilities • Perform skilled rough and finish carpentry work associated with the maintenance, repair, alteration, and improvement of campus buildings and facilities., • Construct, install, repair, and replace walls, partitions, doors, door frames, windows, ceilings, flooring, cabinetry, shelving, trim, and other building components., • Repair and maintain wood, metal, and other architectural finishes and structures., • Install and repair locks, hinges, door hardware, closers, and related building hardware., • Measure, cut, shape, assemble, and install building materials using hand and power tools., • Perform drywall installation, patching, framing, and related finish work as required., • Read and interpret drawings, sketches, specifications, work orders, and technical instructions., • Estimate materials and supplies required to complete assigned work., • Respond to routine and corrective maintenance work orders and complete assignments within required timeframes., • Coordinate work with other trades, including electrical, plumbing, HVAC, painting, and general maintenance personnel., • Maintain tools, equipment, materials, and assigned work areas in a clean and safe condition., • Follow OSHA requirements, site safety procedures, and all applicable federal and contract requirements., • Document completed work and communicate job status, material requirements, and facility issues to supervision., • Perform other carpentry and facility maintenance duties as assigned in support of contract requirements.Minimum Qualifications, • High school diploma, GED, or equivalent., • 5-7 years of experience as a Carpenter or in a directly related carpentry trade., • Demonstrated experience performing commercial, institutional, industrial, or government facility carpentry and maintenance work., • Working knowledge of rough and finish carpentry methods, materials, tools, equipment, and applicable safety practices., • Ability to properly use hand tools, power tools, measuring devices, saws, drills, and other standard carpentry equipment., • Ability to read and interpret drawings, specifications, sketches, and work orders., • Ability to independently troubleshoot and complete carpentry repairs and installations., • Ability to safely perform the physical requirements of the position, including lifting materials, climbing ladders, bending, standing, and working in various facility environments., • Must be able to meet all federal site access, security, and background requirements applicable to the contract.Preferred Qualifications, • Previous experience supporting a federal government, military, educational, institutional, or large commercial facility., • Experience working as part of a multi-trade facilities operations and maintenance team., • Formal apprenticeship, vocational, or trade-school training in carpentry., • Knowledge of applicable building codes and OSHA requirements.Work Environment Work is performed throughout the U.S. Merchant Marine Academy campus and may include administrative buildings, academic facilities, residential facilities, shops, utility spaces, and other interior and exterior campus locations. The position may require work from ladders, lifting and carrying materials, and responding to maintenance requirements throughout the facility. We are currently seeking four (4) qualified Carpenters for this contract.

Job Description Are you looking for a career that challenges you and gives you the opportunity to learn and grow every day? Oliver Inc. is hiring! Our growing Company is looking for enthusiastic talents to partner with our customers for all their printing and packaging needs! With more than 250 years of experience, multiple production facilities, and investment in state-of-the-art technology with an emphasis on sustainability, Oliver Inc. offers speed, consistency and nimbleness as a one-stop solution for all of your printing & packaging needs. At Oliver Inc, our core values are part of the framework of our organization. We're passionate and enjoy our work! We value respect and focus on servicing our customers' needs by providing them with creative solutions that help build their brands. When you partner with Oliver, you partner with success. We are currently seeking an experienced Sheeter Operator to join our team. Join Our Team as a Sheeter Operator Are you an experienced Sheeter Operator with a strong understanding of paper converting and manufacturing operations? We're looking for a dependable, detail-oriented professional to join our production team. In this role, you'll be responsible for converting paper rolls into press-ready sheets while ensuring quality, efficiency, and on-time production. If you enjoy working in a fast-paced manufacturing environment and take pride in producing high-quality work, we'd like to hear from you. What You'll Do As our Sheeter Operator, you will: • Operate sheeting equipment to convert paper rolls into sheets according to production specifications., • Prioritize sheeting jobs based on the daily production schedule., • Inspect paper rolls for defects or damage before production., • Set up and adjust the sheeter, including slitters, anvils, belts, and joggers, to meet job requirements., • Verify sheet size, squareness, and quality throughout production runs., • Maximize efficiency by combining sheeting jobs whenever possible and utilizing existing sheeted inventory., • Monitor raw material inventory and communicate low stock levels to Purchasing., • Perform routine maintenance on the sheeter, including replacing blades and slitters as needed., • Maintain accurate inventory and production records using computer systems., • Print and apply inventory labels to finished skids., • Safely operate forklifts, clamp trucks, stretch wrappers, banding equipment, and scanners., • Assist with training team members as needed., • Maintain a clean, organized, and safe work environment while following all company safety procedures. About You: You're a fit for the role of Sheeter Operator, if your background includes: • Minimum of 3 years of Sheeter Operator experience in a commercial printing, paper converting, or manufacturing environment., • Strong understanding of paper grades, sheeting processes, and production workflows., • Experience operating industrial sheeting equipment., • Forklift and clamp truck operating experience required., • Basic computer skills with the ability to enter production and inventory information into manufacturing systems., • Experience using ERP or manufacturing software (Solar Soft experience is a plus)., • Strong mechanical aptitude and troubleshooting skills., • Ability to read production orders, work instructions, safety procedures, and operating manuals., • Basic math skills, including fractions, decimals, percentages, and measurements., • Strong attention to detail and commitment to quality., • Ability to work independently while collaborating with production and warehouse teams.Physical Requirements, • Ability to stand and walk for extended periods (approximately 75% of the shift)., • Frequently lift up to 50 pounds., • Ability to safely operate powered industrial equipment., • Comfortable working in a manufacturing environment around moving machinery.Why Join Us? At Oliver, we're committed to producing high-quality printed packaging and marketing materials while investing in our employees' success. You'll join a collaborative team where safety, quality, innovation, and continuous improvement are valued every day. We Offer • Competitive hourly pay, • Medical, Dental & Vision Insurance, • 401(k) with Company Match, • Paid Vacation and Holidays, • Career Growth Opportunities, • Stable, Growing Manufacturing Company, • Supportive Team Environment If you're a safety-focused, experienced Sheeter Operator looking to grow your career with an industry leader, we'd love to hear from you. Apply today and become part of the Oliver team! Oliver Inc is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, national origin, religion, gender, gender identity and expression, sex, sexual orientation, disability, age, citizenship status, veteran status or any other characteristic protected by applicable federal, state or local laws. Job Posted by ApplicantPro

The Maintenance Planner is responsible for planning, scheduling, and coordinating \n preventive, predictive, and corrective maintenance activities to maximize equipment \n reliability and minimize downtime. This position works closely with Maintenance \n Supervisors, Mechanics, Purchasing, Operations, and the Tool Crib to ensure labor, \n materials, parts, and outside services are available before work begins. The Maintenance \n Planner maintains the Computerized Maintenance Management System (CMMS), oversees \n maintenance inventory processes, and supports continuous improvement initiatives to \n improve maintenance eEiciency and equipment performance. \n \n Responsibilities: \n Maintenance Planning & Scheduling \n\n • Develop, schedule, and coordinate preventive maintenance (PM) activities for maintenance mechanics based on production schedules and equipment priorities.\n, • Create daily, weekly, and monthly maintenance schedules to optimize labor utilization while minimizing production disruptions.\n, • Prioritize maintenance work orders based on equipment criticality, safety, production requirements, and resource availability.\n, • Coordinate planned maintenance activities with production and maintenance supervisors to ensure equipment availability.\n, • Prepare maintenance work packages that include procedures, labor requirements, parts lists, tools, and safety considerations.\n\n CMMS Administration \n\n • Maintain and update preventive maintenance schedules within the Computerized\n, • Maintenance Management System (CMMS).\n, • Modify PM frequencies, task lists, and procedures based on equipment performance, maintenance history, and reliability improvements.\n, • Ensure work orders are accurate, complete, and properly documented.\n, • Maintain equipment records, asset history, and maintenance documentation within the CMMS.\n, • Generate reports to monitor PM compliance, backlog, and maintenance performance metrics.\n\n Parts & Materials Coordination \n\n • Work closely with the Purchasing Coordinator to identify and procure parts required for planned maintenance activities.\n, • Review planned work to ensure all required materials and replacement parts are available before scheduling jobs.\n, • Coordinate with Maintenance Supervisors to identify upcoming maintenance needs and associated material requirements.\n, • Assist in developing and maintaining critical spare parts inventories to reduce equipment downtime.\n\n Tool Crib & Inventory Management \n\n • Oversee daily operations of the maintenance tool crib.\n, • Supervise tool crib attendants to ensure maintenance parts, tools, and supplies are properly issued and charged to work orders.\n, • Monitor inventory accuracy through routine audits and inventory reconciliation.\n, • Ensure maintenance tools and equipment are organized, available, and maintained in good working condition.\n, • Recommend inventory improvements and adjustments to support maintenance operations.\n\n Contractor & Service Coordination \n\n • Schedule outside contractors, equipment vendors, and service providers for maintenance, repairs, inspections, and facility-related work.\n, • Coordinate vendor-provided equipment service, warranty work, and preventive maintenance visits.\n, • Schedule technical training for maintenance personnel on new equipment, systems, and maintenance procedures.\n, • Communicate scheduling requirements with vendors to ensure timely completion of services.\n\n Cross-Functional Collaboration \n\n • Meet regularly with Maintenance Supervisors to review planned work, priorities, manpower availability, and scheduling needs.\n, • Coordinate with Operations to minimize production interruptions while completing planned maintenance.\n, • Work closely with Purchasing, Warehouse, and Machine Shop personnel to ensure resources are available before scheduled work begins.\n, • Support maintenance and production teams by resolving scheduling conflicts and adjusting priorities when necessary.\n\n Continuous Improvement \n\n • Analyze maintenance data to improve preventive maintenance frequencies and job plans.\n, • Identify opportunities to reduce equipment downtime and improve maintenance Efficiency.\n, • Recommend process improvements related to planning, scheduling, inventory management, and maintenance execution.\n, • Support reliability initiatives through standardized maintenance procedures and improved planning practices.\n\n \n Requirements / Competencies: \n\n • High school diploma or equivalent required; associate’s degree in industrial Maintenance, Mechanical Technology, Engineering Technology, or a related field preferred.\n, • Three to five years of experience in industrial maintenance, maintenance planning, maintenance supervision, or manufacturing operations.\n, • Experience using Computerized Maintenance Management Systems (CMMS) such as Fiix, Maintenance Connection, SAP PM, Maximo, eMaint, or similar systems.\n, • Experience in manufacturing, food processing, industrial, or heavy equipment maintenance environments preferred.\n, • Strong understanding of preventive, predictive, and corrective maintenance principles.\n, • Working knowledge of industrial mechanical, electrical, hydraulic, pneumatic, and facility systems.\n, • Ability to read equipment manuals, technical drawings, and maintenance documentation.\n, • Strong organizational, planning, and scheduling skills.\n, • Excellent communication and coordination skills across multiple departments.\n, • Ability to prioritize multiple projects in a fast-paced manufacturing environment.\n, • Strong analytical and problem-solving abilities.\n, • Proficiency with Microsoft Office applications, particularly Excel, Outlook, and Word.\n, • Knowledge of inventory control and maintenance storeroom best practices.\n, • Ability to analyze maintenance data and recommend improvements.\n\n \n Performance Expectations \n Success in this role is measured by: \n\n • High preventive maintenance completion and compliance rates.\n, • Effective scheduling that minimizes equipment downtime and production disruptions.\n, • Accurate and timely maintenance planning and work order preparation.\n, • Proper availability of parts, tools, and outside services before scheduled work begins.\n, • Accurate CMMS records and maintenance documentation.\n, • Effective management of tool crib inventory and accountability.\n, • Reduction of maintenance backlog and emergency work.\n, • Strong collaboration with Maintenance, Operations, Purchasing, and Supervisors to support safe and reliable plant operations\n\n \n Physical Requirements: \n\n • Primarily office-based with frequent visits to production areas, maintenance shops, warehouses, and the tool crib.\n, • Regular interaction with maintenance personnel, production employees, vendors, and contractors.\n, • May be required to work flexible hours or adjust schedules to support planned shutdowns, emergency repairs, or critical maintenance activities.\n, • Must be able to walk throughout the facility and occasionally lift materials or tools weighing up to 25 pounds.\n\n

PROJECT MANAGER / HVAC - Refrigeration \n Location: West Babylon, NY \n \n WHO IS FIRSTCALL MECHANICAL? \n Select is a commercial HVAC services company based in Long Island, NY. Founded in 1980, Select partnered with FirstCall Group in 2025. \n \n FirstCall Group is a leading provider of commercial and industrial HVAC, building controls, electrical, and plumbing services. FirstCall serves a wide array of facility and customer types, including distribution centers, industrial plants, universities, airports, healthcare facilities, self-storage units, and more. With approximately 700 employees across Ohio, New York, Virginia, Tennessee, North Carolina, South Carolina, Georgia, Florida, and Texas, FirstCall is committed to building durable partnerships. The company is actively expanding its operations nationwide and partnering with organizations that share its dedication to quality and customer satisfaction. \n \n FirstCall Group not only partners with companies to nurture growth in the market but also provides equal focus on employee growth and development as well. We believe when YOU succeed, we all succeed, so we strive to be the first call for talented team members who want a career, not just a job. \n \n BENEFITS OVERVIEW \n FirstCall Group values our employees' well-being, growth, and success! Employees are offered a robust benefits package, including: \n\n • Competitive Weekly Pay\n, • Comprehensive Healthcare Coverage - Medical, Dental, Vision, + More (Includes some 100% Company-paid plans)\n, • Financial Resources - 401(k) Retirement Savings Plan with a 5% match, Life Insurance, Short & Long-Term Disability\n, • Time-Off & Holidays - Up to 4 weeks of Paid Off, 9 Paid Holidays + Veterans Day for Veterans\n, • Career Growth & Development- Company-sponsored education and career advancement programs like the FirstCall Academy, the Learning & Education Assistance Program (LEAP), and the FirstCall Progression Program\n, • Generous Referral Bonus of $2,500 per referral\n, • Role-Specific Perks - Company vehicle or allowance, mobile phone or phone allowance, uniforms, and work boot allowances\n\n \n POSITION OVERVIEW \n We are currently seeking an experienced Project Manager to join our fast-growing team. This role will owe the install and project work end-to-end - estimating, planning, scheduling, execution, and closeout - for HVAC and commercial refrigeration installations, retrofits, equipment replacements, and store refresh/renovation projects. Our customers are primarily convenience stores, fuel-retail, and light-commercial accounts across Long Island and the New York metro. This is a hands-on role for someone who can scope and price a job, get the crew and materials lined up, and drive the project to a clean, on-budget finish. \n \n JOB RESPONSIBILITIES \n\n • Estimate and quote install and project work — HVAC and refrigeration install, retrofits, equipment replacements, and store refresh/renovation projects.\n, • Set up and plan jobs — define scope, order equipment and materials, secure permits, and build the project schedule.\n, • Schedule and coordinate crews — assign and manage install technicians and field labor to keep projects moving (employee logistics).\n, • Own the project to budget and timeline — track cost vs. estimate, manage change orders, and project profit margin.\n, • Manage materials, equipment, and vendors — purchasing, delivery coordination, and supplier relationships for project work.\n, • Coordinate fleet and equipment logistics needed to execute jobs.\n, • Customer coordination — scope, timelines, approvals, and updates with customers and their facilities teams.\n, • Quality, safety, and code compliance — ensure installs meet spec, code, and safety standards.\n, • Closeout — final walk, documentation, and clean hand-off to billing.\n, • Work in BuildOps — estimates, project tracking, POs, and job costing.\n\n \n ACCOUNTABILITIES \n\n • Continual learning and development in the body of knowledge through FirstCall Academy, to ensure we set the bar for skill level in the industry\n, • Elite level of customer service, to ensure we continue to be the FirstCall our customers make for their HVAC needs\n\n \n ORGANIZATIONAL ALIGNMENT \n This position reports to the local Operations Manager. \n \n QUALIFICATIONS \n Required: \n\n • 5+ years in commercial HVAC and/or refrigeration project management, install management, or estimating.\n, • Proven experience estimating and running install / retrofit / replacement projects with budget and schedule.\n, • Ability to read plans and drawings, scope work, and price it accurately.\n, • Crew scheduling and field coordination experience.\n, • Solid knowledge of commercial HVAC and refrigeration systems.\n, • Strong organization, budget discipline, and customer communication.\n, • Comfortable with project/field software (BuildOps or similar)\n, • Valid drivers license\n, • Long Island/New York metro based\n\n Preferred: \n\n • Experience with convenience store, fuel-retail, or multi-site retail projects (e.g., 7-Eleven or similar).\n, • Hands-on commercial refrigeration depth.\n, • Hands-on commercial refrigeration depth.\n\n

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Health insurance, • Paid time off We are seeking a motivated and detail-oriented Machine Painter to join our manufacturing team. In this role, you will be responsible for applying paint finishes to a variety of machinery, equipment, and fabricated components. Your expertise will ensure that products meet strict quality standards while adhering to safety protocols. This position offers an exciting opportunity to contribute to a dynamic production environment where precision, efficiency, and craftsmanship are valued. If you thrive in a fast-paced setting and take pride in delivering outstanding results, this is the perfect role for you! Responsibilities • Prepare surfaces for painting by cleaning, sanding, and masking using hand tools and power tools to ensure optimal adhesion., • Operate paint spraying equipment, spray guns, and other industrial painting tools to apply coatings evenly across different materials., • Use crane or materials handling equipment to move heavy parts or finished products safely within the workspace., • Maintain accurate records of paint types, coats applied, and work completed using basic math skills for measurements and calculations., • Follow safety guidelines related to industrial painting, equipment operation, and materials handling to prevent accidents., • Assist with fabrication or assembly tasks as needed, supporting overall production flow., • Conduct quality inspections using precision measuring instruments to verify coating thickness and finish consistency.Experience, • Prior experience in industrial or manufacturing painting environments, including auto body repair or auto painting is highly desirable., • Knowledge of machining, fabrication, and the use of hand tools and power tools for surface preparation and finishing., • Familiarity with forklift operation, crane usage, and warehouse procedures for materials handling., • Understanding of lean manufacturing principles to promote efficiency and waste reduction on the production floor., • Exposure to construction painting or industrial coating applications will be considered an advantage. Join us in delivering top-tier craftsmanship through precision painting! We provide a supportive environment where your skills will directly impact our manufacturing excellence. Embrace this opportunity to grow your expertise while contributing to innovative projects in a vibrant team setting!

Job DescriptionDescription: JOB TITLE: Machinist/Programmer Job Summary: We are seeking a skilled Machinist/Programmer to join our team. The ideal candidate will have experience operating and programming CNC machines to produce precision parts. You will be responsible for reading blueprints, setting up machines, programming CNC controls and inspecting parts to ensure they meet specifications. Perform the activities of an expert level CNC programmer and shop leader to machine, program, estimate, and coordinate various products per established facility processes, including set-up, fabrication, and inspection using the operations of CNC mills, lathes, and other equipment. Perform as a key contributor for the new knowledge of programs and projects. Apply knowledge of policies, procedures, and the practical application of general and specific technical aspects of the job to complete varied and complex work. Make recommendations for new procedures. Work independently in established procedures and practices. Lead tasks and mentor others. Due to the nature of work performed within this facility, U.S. citizenship is required. Key Responsibilities: · Program set up, and operate CNC machines (lathes, mills, or grinders) to produce parts according to specifications. · Interpret blueprints, engineering drawings, and CAD models to develop and modify CNC programs. · Select and install appropriate tools, fixtures, and materials for each job. · Perform machine maintenance and troubleshooting to ensure optimal performance. · Inspect finished parts using precision measuring instruments to verify conformance to specifications. · Collaborate with engineering and production teams to optimize machining processes and improve efficiency. · Maintain a clean and safe work environment, adhering to company safety policies and procedures. · Continuously monitor machine operations to detect malfunctions or deviations from specifications. Required Qualifications: · High school diploma or equivalent; technical degree or certification in machining, CNC programming, or a related field is preferred. · Proven experience as a Machinist/Programmer, with a strong background in CNC programming and machine operation. · Proficiency in reading and interpreting blueprints, technical drawings, and CAD models. · Experience with various CNC controls (e.g., Fanuc, Haas, Siemens). · Strong knowledge of machining principles, materials, and cutting tools. · Excellent problem-solving skills and attention to detail. · Ability to work independently and as part of a team in a fast-paced environment. · Good communication skills and a commitment to quality and safety. · Ability to lift and carry up to 30lbs. · Comfortable working in a manufacturing environment with exposure to noise, dust and other industrial elements. · 10 years of experience with programming in computer-aided manufacturing (CAM) software and machining and fabrication principles · 10 years of experience with CNC and manual machinery operations · 5 years of experience with using Mastercam and programing and executing 4th and 5th axis machining operations · 3+ years of experience with estimating CNC machining work and jobs · Ability to review engineering drawings for completeness and interpret geometric dimensioning and tolerancing (GD&T) · Ability to inspect and verify all products by using standard inspection equipment and techniques/CMM (Coordinate Measuring Machine) · Ability to set up and operate manual machine shop equipment, including lathes, milling machines, saws, and power tools · Ability to pay strict attention to detail in a manufacturing environment Why Join U.S Dynamics Corporation? At U.S Dynamics Corporation, you will be a part of a supportive and innovative environment that fosters growth and values your professional development. We offer competitive compensation, comprehensive benefits, and opportunities for advancement. Join us in shaping the future with your talent and expertise. Requirements:

Job DescriptionDescription: JOB TITLE: Quality Engineer Company Overview: U. S. Dynamics Corporation is a leading firm in the Manufacturing Industry, known for our commitment in innovation, quality, and sustainability. Our Engineering team is at the heart of designing solutions that meet the future needs of our customers worldwide. We are currently seeking a skilled Quality Engineer to join our dynamic team and continue our mission of excellence. Job Summary: In this role, you will be responsible for ensuring safety and quality of our products and procedures through rigorous inspections, implementations of quality measures, and identification of areas for improvement. You will collaborate with cross-functional teams to address quality issues, drive continuous improvement, and contribute to building a high-quality products that exceed customer expectations. The ideal candidate will possess a strong background in engineering and/or quality assurance, exceptional attention to detail and a proactive mindset. If you are passionate about quality and delivering excellence, we encourage you to apply and become a valued member of the Quality team. Key responsibilities: · Set detailed guidelines on what needs to be checked and what the quality standards are. · Audit our systems based on ISO 9001: 2015 requirements. · Monitor the entire production cycle and perform regular tests to identify potential malfunctions as early as possible. · Inspect product materials and PCB for defects and durability. · Prepare reports on malfunctions and corrective actions (e.g. number of defective raw materials per order) · Review current blueprints and quality documentation · Work with internal teams to increase customer satisfaction by improving the quality of products. Required Qualifications: · Previous work experience as a Quality Engineer, Manufacturing Engineer, or similar role. · In-depth understanding of technical documentation · Able to create a technical document · Working knowledge of RCCA practice · Familiar with IPC610 and J-STD · Familiarity with statistical analysis · Great attention to detail and problem-solving abilities · Team Spirit · Great analytical skills · BSc in Mechanical Engineering, Industrial Engineering, or relevant field. (years of experience will be taken into consideration as a substitute for a BSc) · Additional certification in Quality Assurance is a plus. Why Join U.S Dynamics Corporation? At U.S Dynamics Corporation, you will be a part of a supportive and innovative environment that fosters growth and values your professional development. We offer competitive compensation, comprehensive benefits, and opportunities for advancement. Join us in shaping the future with your talent and expertise. Requirements:

Job Description HVAC Assistant Project Manager Location: Farmingdale, NY Industry: HVAC / Construction Salary Range: $75,000 – $90,000 Job Type: Full-time/Permanent About the Company We are a well-established HVAC contractor based in Farmingdale, NY, serving commercial and industrial clients throughout the region. Our team is known for delivering high-quality mechanical solutions with a focus on integrity, efficiency, and safety. As we continue to grow, we’re seeking a motivated and detail-oriented Assistant Project Manager / Job Accountant to join our operations team. Position Summary The Assistant Project Manager / Job Accountant will support project execution and financial tracking for multiple HVAC construction projects. This hybrid role blends operational support with accounting responsibilities, making it ideal for someone with a strong grasp of both project coordination and job costing within the construction industry. Key Responsibilities Project Management Support • Assist Project Managers with daily project coordination and documentation, • Track project schedules, budgets, and change orders, • Communicate with vendors, subcontractors, and internal teams to ensure smooth project execution, • Manage submittals, RFIs, and closeout documentation, • Help coordinate material deliveries and field operations Job Costing & Accounting • Set up and maintain job cost codes and budgets in the accounting system, • Track and reconcile costs, labor hours, purchase orders, and subcontractor invoices, • Assist in the preparation of monthly job cost reports and forecasts, • Monitor billing schedules and support the preparation of AIA billings and progress billings, • Work closely with the accounting department to ensure accurate revenue recognition and project profitability Qualifications • 2–5 years of experience in HVAC, mechanical contracting, or general construction, • Experience in both project coordination and job cost accounting, • Familiarity with construction management software (e.g., Procore, Sage 300 CRE, Foundation, or similar), • Strong proficiency in Microsoft Excel and project tracking tools, • Excellent organizational and communication skills, • Ability to manage multiple projects and priorities in a fast-paced environment, • Bachelor’s degree in Construction Management, Accounting, Business, or a related field preferred

Job DescriptionBenefits: • Opportunity for advancement, • Company parties, • Competitive salary, • Free food & snacks, • Free uniforms, • Training & development Benefits/Perks • Mandatory ready to work all winter events, • Competitive Pay, • Career Advancement, • Mandatory experience Job Summary We are seeking Machine operators for winter snow removal all Commercial sites to join our team. In this role, you will support worksite operations with trucks, skid steers, wheel loaders. Must have experience with push boxes, plows , sanders.. . CDL a perk but not needed - pay based on experience. Fleet update and well-maintained growing team with great values - pay based on experience email - admin@pscli.com Responsibilities • Primary Focus: Snow Removal Operator, • Maintain a clean work environment by picking up trash, excess building materials, or other potentially hazardous products, • Transport materials and equipment from one location to another, • Operate power tools and/or industrial equipment, • Set up cones and warning signs to increase visibility Qualifications • Ability to meet the physical demands of the job, including lifting heavy objects, digging, and standing for long periods, • Strong attention to detail, • Excellent hand-eye coordination, • Ability to adhere to all safety rules and regulations, • Knowledge of power tools and industrial machinery is preferred, • Strong teamwork and interpersonal skills, • Additional certifications or apprenticeship experience is preferred but not necessary, • CDL / heavy truck experience, • Trailers, • Heavy equipment, • Push boxes /, • Plows

Job DescriptionIf you take pride in a good setup and enjoy the satisfaction of seeing a custom part come off the machine exactly to spec, this is the kind of machining work that puts your experience to use. Maloya Laser is looking for an experienced CNC Machinist to set up and operate CNC milling and conventional machining equipment at our Commack facility. You’ll produce components for industries ranging from aerospace and transportation to architectural and process machinery. You’ll use your setup skills and judgment at the machine while continuing to build your CNC programming capabilities through varied, custom machining work. What We Offer Maloya has been manufacturing custom metal products in New York for more than 50 years, combining experienced craftsmanship with continued investment in modern manufacturing technology. You’ll work at our 22,000-square-foot, climate-controlled manufacturing facility in Commack’s Hauppauge Industrial Park. In addition to $28-$40 per hour, depending on experience, you can expect: • 401(k) retirement plan, • Medical, dental, and vision insurance, • Consistent Monday-Friday hours, 6:00 AM-2:30 PMWhat You’ll Do, • Set up and operate CNC milling equipment and conventional machine shop equipment, including lathes, drill presses, and grinders, • Read and interpret drawings, tolerances, work orders, and specifications to accurately machine components, • Set work offsets, load tools and offsets, call up and run programs, and make appropriate adjustments at the machine, • Measure and inspect work to print specifications using verniers, height gauges, micrometers, and other inspection tools, • Inspect finished parts for cosmetic quality and accurately document part quantities and production data, • Assist with machine shop equipment maintenance while keeping your work center clean, organized, and ready for productionWhat You Bring, • 5+ years of machine shop setup and production experience, • Experience setting up and operating CNC milling equipment, • Functional knowledge of CNC G-code, • Ability to confidently read and interpret prints, dimensions, and tolerances, • Experience using precision measuring equipment, including verniers, height gauges, and micrometers, • Working knowledge of conventional machining equipment and hand tools, • Solid basic math and computer skills, • Functional English reading and verbal communication skills, • A reliable, detail-focused approach to safety, accuracy, and quality Powered by JazzHR Np0Nds13ib

Job Description Feeling stuck? Put your career in motion with a great, new opportunity. Join the Kelly® team as a Manufacturing Lab Technician to work at a premier manufacturing client in Hauppauge, NY. We’re here every step of the way to help you and your career be the best it can be. Bring your energy and expertise. We’ll help you get where you want to be. Salary/Pay Rate/Compensation: $23.00/hourShift: 1stWhy you should apply to be Manufacturing Lab Technician: • Competitive pay rate with consistent hours, • Work in a cutting-edge research and development environment, • Opportunity to contribute to innovative filtration products and manufacturing processes, • Join a team that values safety, organization, and continuous improvementWhat’s a typical day as Manufacturing Lab Technician? You’ll be:, • Setting up, operating, monitoring, and shutting down laboratory, pilot-scale, and manufacturing equipment under guidance from R&D scientists and engineers, • Monitoring process conditions and equipment indicators to ensure adherence to process requirements, • Preparing materials, solutions, equipment, and work areas for development trials, • Executing experiments and membrane-characterization activities according to approved procedures and safety protocols, • Maintaining clean, organized, and safe work areas, adhering to strict environmental, health, and safety requirements for chemical handling and waste disposal, • Identifying and communicating process, equipment, safety, or experimental issues promptly, • Contributing practical ideas and observations for continuous improvement, • Completing laboratory records, trial documentation, and equipment logs accuratelyThis job might be an outstanding fit if you:, • Have a high school diploma or GED (required), • Bring a minimum of 2 years of manufacturing experience, • Possess strong knowledge of basic mathematics, • Can read, comprehend, and follow written work instructions in English, • Are comfortable using computers and Microsoft OS, • Can operate basic measuring equipment (rulers, calipers, etc.), • Have proven ability to safely handle chemicals and adhere to environmental, health, and safety procedures, • Excel in operating and monitoring production or pilot-scale equipment, • Demonstrate accuracy in documenting activities and troubleshooting process or equipment issuesWhat happens next Once you apply, you’ll proceed to next steps if your skills and experience look like a good fit. But don’t worry—even if this position doesn’t work out, you’re still in our network. That means all of our recruiters will have access to your profile, expanding your opportunities even more. Helping you discover what’s next in your career is what we’re all about, so let’s get to work. Apply to be Manufacturing Lab Technician today! As part of our promise to talent, Kelly supports those who work with us through a variety of benefits, perks, and work-related resources. Please note: The following benefits reflect Kelly's general offerings. Eligibility may vary by assignment, location, and job type. Kelly offers eligible employees voluntary benefit plans including medical, dental, vision, telemedicine, term life, whole life, accident insurance, critical illness, a legal plan, and short-term disability. As a Kelly employee, you will have access to a retirement savings plan, service bonus and holiday pay plans (earn up to eight paid holidays per benefit year), and a transit spending account. In addition, employees are entitled to earn paid sick leave under the applicable state or local plan. Click here for more information on benefits and perks that may be available to you as a member of the Kelly Talent Community. Put your skills to work. There are a lot of different light industrial jobs out there. Kelly® Professional & Industrial recruiters are focused on only offering opportunities with companies that provide competitive pay, safe work environments, and cultures that recognize your value. Whether you’re looking for flexible shifts, performance bonuses, or a progressive work culture-we’re dedicated to finding the very best opportunities for you. About Kelly Work changes everything. And at Kelly, we’re obsessed with where it can take you. To us, it’s about more than simply accepting your next job opportunity. It’s the fuel that powers every next step of your life. It’s the ripple effect that changes and improves everything for your family, your community, and the world. Which is why, here at Kelly, we are dedicated to providing you with limitless opportunities to enrich your life-just ask the 300,000 people we employ each year. Kelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California’s state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Kelly may use AI-powered tools during the recruitment and hiring process. For full details, including how Kelly uses AI, your rights, and how to request a reasonable accommodation, visit the Recruitment Artificial Intelligence Notice.

Job Description Mama’s Creations, Inc. (NASDAQ: MAMA) is a leading marketer and manufacturer of fresh deli prepared foods, found in over 8,500 grocery, mass, club and convenience stores nationally. The Company’s broad product portfolio, born as MamaMancini’s, from a rich history in Italian foods, now consists of a variety of high quality, fresh, clean and easy to prepare foods to address the needs of both our consumers and retailers. Our vision is to become a one-stop-shop deli solutions platform, leveraging vertical integration and a diverse family of brands to offer a wide array of prepared foods to meet the changing demands of the modern consumer. For more information, please visit https://mamascreations.com Position Summary The Manager, Facilities is responsible for the enterprise-wide strategy, execution, and continuous improvement of facilities, and sanitation operations across all Mama’s Creations locations. This role ensures buildings, utilities, infrastructure, and site services are safe, compliant, environmentally responsible, and operationally reliable. This role is both strategic and hands-on. In addition to establishing enterprise facilities standards, systems, and priorities, the Senior Manager will actively support facilities and sanitation execution, including on-site troubleshooting, inspections, project support, and direct coordination with contractors and regulatory agencies, as needed. With a commitment to Grandma Quality, demonstrated by pride in workmanship, accountability, and leadership by example, partner closely with Program Management, Operations, FSQA, and site leadership to ensure facilities reliably support the overall operation today, while scaling for future growth. Key Responsibilities • Provide enterprise leadership for facilities operations across all manufacturing and office locations, including buildings, utilities, infrastructure, and site services. • Establish, execute, and continuously improve enterprise facilities standards, policies, and operating practices, while accounting for site-specific layouts, equipment, and operating conditions. • Serve as a hands-on facilities leader, actively supporting on-site facilities work as needed, including inspections, troubleshooting, project execution, and issue resolution. • Ensure facilities operations support safe, compliant, and efficient production and administrative. • Oversee preventive and corrective facilities maintenance related to building systems, including HVAC, refrigeration, electrical distribution, plumbing, compressed air, steam, water, and wastewater systems. • Own facility-related permitting and approvals, including building permits, inspections, certificates of occupancy, and associated documentation. • Serve as the primary enterprise interface with authorities having jurisdiction (AHJs), including building departments, fire marshals, environmental agencies, and utility providers. • Actively coordinate inspections, approvals, and close-outs, ensuring projects and modifications meet code, environmental, and operational requirements. • Lead and support environmental compliance programs, including wastewater, stormwater, air emissions (as applicable), hazardous materials handling, waste management, and spill prevention. • Own sanitation execution and readiness across all facilities in alignment with FSQAdefined standards, SOPs, and acceptance criteria., • Lead and manage a defined group of dedicated sanitation employees, ensuring staffing, training, scheduling, and execution meet operational and food safety needs. • Ensure sanitation activities are completed on time and to standard, supporting successful FSQA pre-operational inspections and production release. • Provide and maintain sanitation tools, chemicals, equipment, and infrastructure required for effective execution. • Own sanitation labor planning, budgeting, and cost control, to minimize spend while meeting FSQA standards, operational needs, and commitment to Grandma Quality. • Respond to and correct sanitation deficiencies identified by FSQA, ensuring timely and sustainable corrective actions. • Partner with Operations to align sanitation windows with production schedules while protecting food safety integrity. • Reinforce disciplined sanitation execution as a critical control system, not a support function. • Provide facilities leadership and hands-on support for CapEx projects, expansions, and facility upgrades, ensuring reliability, safety, and compliance are designed in. • Actively oversee and support office, and manufacturing facility upkeep, layout changes, and reconfigurations, ensuring offices and production areas are safe, functional, and reflect Grandma Quality in appearance and execution. • Oversee grounds and exterior facility maintenance, including landscaping, snow and ice removal, parking areas, walkways, and exterior lighting, ensuring safe access, regulatory compliance, and a professional, well-maintained appearance year-round. • Coordinate closely with Reliability & Asset Management on shared systems, infrastructure reliability, and asset lifecycle planning. • In partnership with Procurement, manage and directly engage third-party vendors and contractors, ensuring safety, quality of work, compliance, and cost control. • Develop, track, and review facilities and environmental KPIs, including work order completion, compliance status, inspection outcomes, and utility reliability. • Identify risks, constraints, and improvement opportunities related to facility condition, capacity, environmental compliance, and infrastructure readiness. • Participate in M&A diligence and post-acquisition integration, assessing facilities condition, permitting status, environmental risk, and infrastructure gaps. • Ensure facilities and environmental practices are standardized across locations, while allowing flexibility for site-specific needs. • Communicate facilities performance, risks, and priorities clearly to enterprise and site leadership. • Reinforce a culture of Commitment to Craftsmanship, safety, environmental stewardship, accountability, and respect through daily actions and expectations. Qualifications • Bachelor’s degree in Facilities Management, Engineering, Environmental Engineering, Industrial Maintenance, or related field. Relevant work experience will be considered for internal candidates. • 10+ years of progressive experience in facilities management within manufacturing or industrial environments. • 3+ years of experience leading facilities teams or site-based leaders in a multi-site environment. • Demonstrated ability to both lead and perform facilities work, including building systems troubleshooting and project execution. • Strong working knowledge of industrial building systems, utilities, and infrastructure., • Working knowledge of environmental compliance requirements, including wastewater, stormwater, waste management, and applicable air regulations. • Experience managing permits, inspections, contractors, and regulatory interactions., • Strong organizational, problem-solving, and leadership skills., • Ability to partner cross-functionally and lead through influence., • Experience in food manufacturing or other regulated environments. Essential Physical Requirements • Ability to regularly perform on-site facilities work, including walking, standing, climbing, bending, and navigating mechanical and utility spaces. • Ability to navigate stairs, ladders, catwalks, rooftops, and uneven surfaces safely., • Ability to wear required PPE, including safety shoes, gloves, safety glasses, hearing protection, and other protective equipment. • Ability to lift, carry, push, or pull up to 50 pounds., • Ability to work in varying environmental conditions, including temperature extremes, noise, humidity, and exposure to industrial systems. • Ability to travel between facilities as required., • Ability to sit for extended periods while performing planning and administrative work., • Ability to communicate clearly and effectively, verbally and in writing. This job description is intended to describe the general nature and level of work being performed. It is not an exhaustive list of all responsibilities, duties, or skills required. Duties, responsibilities, expectations, and reporting structures may change at any time based on business needs, organizational priorities, or operational requirements, with or without notice

Job Description Ross Metal Fabricators | Deer Park, New York Ross Metal Fabricators, a leader in the design and manufacture of industrial mixing and blending equipment, is seeking an experienced Metal Polisher to join our growing team. The ideal candidate will have experience working with steel and stainless-steel components and possess a strong attention to detail and commitment to quality. This position is responsible for preparing, grinding, deburring, and polishing components to meet required surface finish specifications. Duties and Responsibilities • Deburr, grind, and polish steel and stainless-steel parts and components, • Operate pneumatic and electric grinding and polishing hand tools safely and effectively, • Perform polishing operations ranging from approximately 70 RA (80 grit) to a 4 RA mirror finish, • Inspect finished parts to ensure surface quality and finish requirements are met, • Follow established quality and safety procedures, • Maintain a clean, safe, and organized work environment, • Work collaboratively with supervisors and fellow team members to meet production schedules and quality requirements Qualifications • Strong attention to detail and commitment to producing high-quality work, • Ability to perform visual inspections to ensure parts are completed properly, • Ability to work independently as well as collaboratively in a team environment, • Must maintain a professional, clean, and organized work area, • Must possess basic personal tools, including wrenches, screwdrivers, and a tape measure Education and Experience • High school diploma or equivalent required, • Previous experience polishing, grinding, and finishing steel and stainless-steel components required, • Experience polishing stainless steel to specified surface finish requirements strongly preferred What We Offer • Medical insurance, • Dental and vision insurance, • 401(k) with employer match, • Vacation and PTO policy, • Paid holidays, • Positive and collaborative work environment Job Type Full-time Interested candidates should submit their resume to RMF-Employment@mixers.com

Job Description We are seeking a skilled Fire Sprinkler Designer with a minimum of 3 years of experience in designing fire sprinkler and fire standpipe systems. The ideal candidate will have a strong understanding of NFPA 13, NFPA 14, NFPA 20, and preferably NYC building codes. This role involves working on various project types, including commercial, industrial, mixed-use, educational, and medical facilities, and requires occasional travel to project sites. The designer will report to the Lead Engineer and utilize advanced design software such as AutoCAD, Sprink-CAD, Autosprink, and HydraCAD. Responsibilities • Design fire sprinkler and fire standpipe systems, • Develop system layouts and ensure code compliance, • Review and approve fire protection plans, • Prepare and maintain detailed project documentation, • Collaborate effectively with engineers, clients, and project teams, • Conduct technical analysis to optimize system performance, • Ensure quality assurance standards are met throughout design phases, • Coordinate design efforts with BIM integration, • Communicate clearly with clients regarding design and project status Required Qualifications • Minimum 3 years of experience in fire sprinkler system design Preferred Qualifications • Knowledge of NFPA 13, NFPA 14, and NFPA 20 standards, • Experience with fire sprinkler and fire standpipe system design, • Proficiency in AutoCAD and related design software, • Strong attention to detail and problem-solving skills, • Excellent communication abilities\nCompany Description A & F Fire Protection Co., Inc. is a fire sprinkler and fire standpipe contractor offering full turnkey service including design, fabrication, installation, service and approvals. Founded in 1971, A & F Fire Protection Co., Inc. is a 2nd generation family business licensed in Nassau, Suffolk, New York City, New Jersey and Florida. Established in Massapequa and now located in West Babylon, New York as one of the industry’s premier providers of fire and life safety, A & F Fire Protection Co., Inc. is dedicated to meeting the needs of our customers. We are committed to our integrated business and delivery model. A & F Fire Protection Co., Inc. is a fire sprinkler and fire standpipe contractor offering full turnkey service including design, fabrication, installation, service and approvals. Founded in 1971, A & F Fire Protection Co., Inc. is a 2nd generation family business licensed in Nassau, Suffolk, New York City, New Jersey and Florida.\r\n\r\nEstablished in Massapequa and now located in West Babylon, New York as one of the industry’s premier providers of fire and life safety, A & F Fire Protection Co., Inc. is dedicated to meeting the needs of our customers. We are committed to our integrated business and delivery model.

Job Description K&A Power Group – is a privately held engineering firm delivering worldclass technical expertise and engineering excellence to power utility and industrial clients across the United States, Asia, the Middle East, and Africa. We provide comprehensive consulting, engineering and design, program and project management, construction management, and EPC services, specializing in substation, transmission, distribution, and distributed energy resources. We pride ourselves on attracting and developing top talent, building a culture of excellence, and building meaningful, long-term relationships with our employees, clients and communities, wherever they are in the world. Powered By Innovation, Passion, And Purpose. Start your K&A Career: We are seeking a highly motivated and skilled Field Construction Coordinator to join our team at K&A Power Group in Auburn, New York. In this role, you will have the opportunity to work on exciting and challenging projects that make a real impact in the energy and utility sectors. You’ll be part of a dynamic, people-focused team where your expertise, ideas, and contributions will be valued and celebrated. Role Expectations: • Field Support to Resolve Problems – Being Proactive, • Must do Reporting – Weekly Report, Monthly Reports, tracking of weekly PayId’s completed., • Monitor Schedule - Look Ahead vs. PM, • Attend the contractor’s Safety, Environment and Quality meetings; provide a tip in the onsite meeting., • Maintain and update as needed the onsite H&S, Environment and Quality project binder., • Be organized, and document all project progress to provide a good paper trail, • Review contractor invoices and schedules and provide feedback., • Conduct weekly project progress meeting. Request the contractor two week look ahead schedule at each weekly meeting., • Present onsite when work is being performed (make frequent observation of contractor’s activities)., • Immediate notification to PM of all problems or foreseeable issues throughout construction, or any complaint presented by the general public., • Coordinate Material delivery between Customer Stockroom, and Contractor., • Inspect all project related construction material for damage and completeness for the project execution., • Inspect work in progress to ensure that workmanship conforms to specifications, quality and adherence to construction schedules., • Facilitate resolving construction problems, discrepancies, procedures, and methods by working with engineering personnel, inspectors, contractors and suppliers. Must have strong communications skills., • Minimize Change Orders. Support Project Manager to review any requested Change, • Orders/Notices or other claims submitted by Construction Contractors which relate to additional payments, schedule adjustments or other modifications to the Project, and make such recommendations to the PM regarding the legitimacy of such claims and review the, • Construction Contractor’s proposed mitigation., • Review and understand the project documentation and any related documentation and provide input to enhance the constructability of the Project, taking into account schedule, cost and quality considerations., • Maintain a daily on-site as-build project plans., • Continuously communicate (written and verbally) with the associated PM., • Adhere to company policies, programs and procedures as well as Critical Infrastructure, • Protection (CIP). Ensure all requirements are maintained throughout the project execution, • Promote a proactive safety culture by encouraging open communication, reporting unsafe conditions, and suggesting improvements to safety practices., • Diligently ensure compliance with safety regulations, conducting safety inspections, and identifying potential hazards to mitigate risks and maintain a safe working environment for all personnel. What we’re looking for: • Minimum of five (5) years’ experience in progressive related electric utility industry experience, with transmission facilities construction management, • Two (2) years of college is preferred, • Construction Project Engineer Background Preferred, • Distribution line work experience required, • MS Suite Required – with high competency in MS Excel, • Knowledge of NRA clearances and switching orders would be beneficial, • Applicants should have the knowledge, experience and skills needed to review project plans, specifications, contract enforcement, and applicable technical standards, OSHA and other regulatory statutes., • Detailed work experience in electrical Utility transmission UV/OV & civil construction, • Must have current US Work authorization and valid US Driver License in good standing, • Minimum of 5 years of supervisory capacity experience, • Knowledge of GPS Systems & knowledge of SAP are preferred, • Ability to read and interpret specifications and drawings and convey interpretations to contractors, • Ability to investigate and solve construction problems in a timely manner with minimum dependence on others, • Computer and Administrative skills, • Strong verbal, written and interpersonal communication skills, • Must be able and willing to attend training in E-STAR/CONVEX (switching and tagging)., • Initiate distribution outage requests for project work through E-STAR and/or CONVEX Pay Range $40—$46/an hour Why Join K&A? People-First Culture: We put our people at the center of everything we do, creating an environment where your professional and personal growth is a top priority. Innovation & Learning: We encourage continuous learning and invest in your development through training, mentorship, and hands-on experience. Collaborative Team Environment: We believe in the power of collaboration and working together to achieve the best outcomes for our clients and employees. Recognition & Growth: We’ve earned our reputation through uncompromising precision and a commitment to excellence. As an agile and fast-growing company, we offer plenty of opportunities for your career advancement and growth. Competitive Compensation & Benefits: We offer a comprehensive benefits package for eligible classified employees, including but not limited to: • Medical, Dental, and Vision Insurance, • FSA, HSA, and Dependent Care Spending Account, • 401K (Traditional and Roth with company match), • Lifestyle Spending Account (LSA), • Paid Parental Leave after 12 months of employment, • Paid Holidays and Flexible PTO, • Tuition Reimbursement, • Long-Term Disability, Short-Term Disability, and Life Insurance, • EAP (Employee Assistance Program), • Parking and Transit Reimbursement, • Pet Insurance Check out our career page for more information! The salary range for this role considers a wide range of factors that are considered in making compensation decisions, including but not limited to technical ability, experience and training, licenses and certifications, and other related skillsets. The disclosed range is an estimate and has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled.

Job Description Compensation: $25–$38 per hour, depending on experience Higher compensation available for experienced gate technicians and lead-level candidates About Max Security USA Max Security USA is a leading provider of integrated security solutions serving commercial properties, residential communities, HOAs, and industrial facilities. We specialize in automatic gate systems, access control, video surveillance, remote guarding, and perimeter security solutions. Position Overview Max Security USA is seeking an experienced Gate & Access Control Technician / Low Voltage Installer to install, service, troubleshoot, and maintain automatic gate systems, access control equipment, cameras, and related low-voltage security systems. We are specifically looking for candidates with hands-on experience working with automatic gates, gate operators, barrier arms, and access control systems. This position is ideal for an experienced field technician who takes pride in clean installations, understands how to troubleshoot equipment in the field, and values system reliability and professional workmanship. Key Responsibilities • Install, service, troubleshoot, and repair automatic gate systems, gate operators, and barrier arms, • Diagnose mechanical, electrical, wiring, sensor, safety-loop, and control-board issues, • Install and service vehicle and pedestrian access control systems, • Install card readers, keypads, intercoms, maglocks, electric strikes, and related access control equipment, • Install, terminate, test, and troubleshoot IP and analog surveillance camera systems, • Pull, label, terminate, and dress low-voltage cabling including Cat5e, Cat6, coax, and control wiring, • Install and connect gate control panels, loops, photo eyes, safety devices, readers, keypads, and related equipment, • Mount cameras, panels, readers, operators, and control equipment, • Configure, program, test, and commission systems for proper operation, • Read and interpret wiring diagrams, equipment manuals, and site plans, • Perform preventative maintenance, service calls, system upgrades, and equipment replacements, • Troubleshoot existing installations and identify the root cause of system failures, • Communicate professionally with property managers, clients, vendors, and other technicians, • Maintain a clean, safe, and organized job site, • Complete work orders and service documentation accuratelyRequired Qualifications, • 2+ years of experience in low-voltage, access control, gate automation, or security system installation, • Hands-on experience installing or servicing automatic gates and gate operators, • Experience with barrier arms, slide gates, swing gates, or similar automated gate systems, • Experience with access control systems and low-voltage wiring, • Strong understanding of electrical and low-voltage wiring, relays, sensors, and terminations, • Ability to diagnose and troubleshoot system problems independently in the field, • Ability to use multimeters, hand tools, power tools, and diagnostic equipment, • Ability to read wiring diagrams and equipment documentation, • Valid driver's license and acceptable driving record, • Ability to work outdoors and on ladders and lifts when required, • Strong attention to detail and pride in workmanship, • Professional appearance and communication skillsPreferred Qualifications, • Experience with LiftMaster, DoorKing, HySecurity, FAAC, Nice, or similar gate operator systems, • Experience troubleshooting gate loops, photo eyes, safety edges, vehicle detection equipment, and operator control boards, • Experience with HOAs, gated communities, commercial properties, or industrial facilities, • Experience with access control platforms and card-reader systems, • Basic networking knowledge including IP addressing, PoE switches, and network troubleshooting, • Experience with Axis, Hikvision, HID, or similar security manufacturers, • OSHA-10 or OSHA-30 certification, • Previous customer-facing service experience, • Experience leading installations or supervising other techniciansWhat We Offer, • $25–$38 per hour based on experience, • Higher compensation potential for experienced gate technicians and lead technicians, • Steady, year-round work, • Overtime opportunities, • Company vehicle for qualified technicians, • Tools and equipment provided, • Growth and advancement opportunities, • Opportunity to work on a wide variety of gate, access control, surveillance, and perimeter security systems, • Professional, team-oriented work environmentWho We're Looking For We are looking for someone who has real field experience with automatic gates and access control, not simply general construction or cable-pulling experience. The strongest candidates will be comfortable diagnosing a gate that is not operating properly, tracing wiring, testing safety devices, troubleshooting an operator or control board, and completing the repair professionally. If you have experience with automatic gates, gate operators, access control, and low-voltage security systems, we encourage you to apply. Powered by JazzHR u18MMFw9fA

Job Description About Us MAX USA Corp is a leading manufacturer of professional-grade construction and industrial tools, serving customers across North America. Known for innovation, quality, and durability, our products include rebar tying tools, pneumatic nailers, and power-driven fastening systems. We are committed to helping professionals across multiple industries improve productivity and safety on the job. As part of the global MAX Group, we combine a rich history of engineering excellence with a forward-thinking approach to growth and customer satisfaction. Position Summary The National Accounts Sales Executive is responsible for growing sales of MAX Sign & Marking Products throughout the United States and Canada. This role focuses on developing new end-user accounts, expanding the dealer network, conducting product demonstrations, and supporting dealers and customers after the sale. The ideal candidate is self-motivated, relationship-focused, and comfortable identifying new business opportunities through prospecting, customer visits, trade shows, and other direct sales activities. Key Responsibilities Business Development & Sales Develop and maintain a target list of prospective end users Conduct outbound sales activities, including cold calling and prospecting, to generate new business opportunities Introduce MAX products to prospective customers and schedule and conduct product demonstrations Develop and execute sales promotions and marketing initiatives Identify opportunities to grow sales within new and existing accounts Dealer Development & Support Develop and expand the MAX dealer network Maintain and strengthen relationships with existing dealers Train dealer sales representatives on MAX products Identify key dealer personnel and implement targeted sales and promotional initiatives Visit end users alongside dealer sales representatives to promote MAX products and increase sales Respond promptly and professionally to dealer and customer questions and requests Customer & Product Support Provide product support and troubleshooting assistance to dealers and end users Deliver effective product demonstrations and sales presentations Provide continued support to customers following the sale Partner with Engineering to conduct field testing and product evaluations as needed CRM & Reporting Use Salesforce daily to document sales calls, email campaigns, customer interactions, opportunities, and other sales activity Submit expense reports, trade show reports, dealer visit reports, customer follow-up letters, and other required documentation in a timely manner Maintain accurate customer, sales, and market information Travel & Trade Shows Travel throughout the United States and Canada to visit dealers and end users Attend trade shows and other industry events to demonstrate MAX products and generate qualified sales leads Conduct in-person customer visits and product demonstrations as required Additional Responsibilities Partner with the Office Manager to assist with the collection of past-due accounts Complete special projects and other duties as assigned Follow all MAX company policies, procedures, and regulations Qualifications Education & Experience Bachelor’s degree or equivalent professional experience preferred At least two years of B2B sales experience, preferably within industrial products, labeling, marking, or a related industry Experience with outbound sales, cold calling, prospecting, and business development Experience using Salesforce or a similar customer relationship management system Skills Strong communication, prospecting, and relationship-building skills Ability to conduct product demonstrations and deliver effective sales presentations Proficiency with Microsoft Office, including Outlook, Excel, Word, and PowerPoint Strong organizational and time-management skills Self-motivated, results-oriented, and comfortable working independently Travel Requirements Ability to travel throughout the United States and Canada as required Valid driver’s license Ability to travel by air Reports to: Marketing Manager Salary - $70,000 - $85,000/year

Job Description Schivo Medical, a contract manufacturer on Long Island, manufactures a diverse range of essential medical technology solutions and is seeking to hire an experienced CNC Repair Mechanic. While working for Schivo Medical, you will be part of a company that is committed to keeping a clean working environment and that helps their employees build a fulfilling and rewarding career. Come build your skills and work with the top professionals in CNC Production today. CNC Repair Mechanic job overview: The Service Technician is responsible for repairing and maintaining complex CNC machinery and mechanical / electrical equipment for manufacturing medical and firearm components. He ensures maximum equipment efficiency and effectiveness. CNC Repair Mechanic Essential Duties and responsibilities: • Must be able to change ball screws, guide rails, and align spindles using indicators., • Trouble shoot issues & perform all repair, modifications, adjustments, and preventive/predictive and routine maintenance on production equipment- CNC machines (i.e., Tornos Deco2000), • Troubleshoot issues and repair failures of production equipment. Electrical Repairs and / or replacement of control devices, including circuit boards and memory devices Assist Operation with analyzing deviations and definition of machine related corrective actions., • Initiate repairs and modifications as a function of Continuous Improvement and process stability (e.g., 5S and Preventive Maintenance)., • Control spare parts inventory stock Support all aspects of building maintenance/routine shop preventive maintenance as needed. Monitor and maintain environmental, health and safety equipment and systems for both production and non-production equipment as directed. CNC Repair Mechanic Education and skills Requirements: High school diploma or GED required. Associate’s degree in industrial maintenance or similar 2-year technical degree in a related field preferred not required. 5+ years field knowledge as a multi-craft technician in the following fields: CNC Repair, Mechanics, Industrial Electrical systems, Electronics, Hydraulics, Pneumatics, and PLC. Strong repair background. Language Skills: Ability to read and interpret documents and drawings (e.g., blueprints, manuals, wiring diagrams etc.) Must be able to work in a team environment. Physical requirements: • Ability to stand for several hours., • Ability to lift 50lbs. Benefits: • 401(k), • Dental insurance, • Vision Insurance, • Health insurance, • Generous paid time off, • EAP program, • Employee referral program, • Free snacks on Fridays, • Free coffee and tea daily Schivo Medical is an Equal Opportunity Employer. All qualified applicants will receive employment consideration without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, genetic information, disability, or protected veteran status.

Job DescriptionDescription: Position Summary: The Manager of Equipment Maintenance is responsible for supporting assigned production divisions to ensure equipment, documentation, plant, and support systems are repaired, maintained, up to date, and in good working order. Day and Night shift opportunities available. Requirements: Responsibilities: Responsibilities include, but are not limited to: • Develop, execute, and manage equipment maintenance department to meet all requirements and yield a greater than 90% first time right., • Communicate daily with cross-functional department directors and managers., • Troubleshoot and resolve complex equipment issues, driving root cause analysis., • Maintain and process paperwork (internal PO and Vendors) for Accounts Payable., • Evaluate and monitor spare parts to minimize downtime. Monitor and maintain spare parts database, submit requisition for equipment and parts as needed., • Manage relationships with cross-functional teams to install, rebuild, or replace production equipment., • Manage plant maintenance support personnel., • Ensure that technical staff are adequately trained, equipped, and motivated so that technical work can be accomplished in a safe, timely, and cost-effective manner., • Review the operation of plant equipment and systems constantly to minimize unplanned downtime, anticipate and solve problems in a timely manner, and identify opportunities for improvement., • Initiate and carry out projects that improve efficiency and/or reduce operating costs., • Track, analyze and improve key maintenance parameters such as asset utilization, maintenance cost, PM compliance, schedule compliance, etc., • Interface with all equipment monitoring, CMMS, BMS and production/project management software, to plan work activities, and develop interdepartmental feedback, ensuring proper record keeping for maintenance activities., • Perform center lining and 5S work to production lines, product contact parts, and change parts., • Maintain safety, health, and environmental policies and procedures., • Act as role model exemplifying superb ethical conduct and decision making, teamwork, integrity, agility, respect, and accountability., • Other responsibilities as assigned by senior management. Education and Experience: • High school or GED diploma required., • Bachelor’s degree in mechanical engineering, Industrial Maintenance, or related field, or equivalent experience., • 5 years of experience in mechanics and electrical, preferably in a pharmaceutical manufacturing setting; at least 1 year in supervisory or management role. Skills, Knowledge, and Abilities: • Proven leadership experience, with the ability to supervise and motivate a team., • Knowledge of safety regulations, compliance standards, and risk assessment procedures., • Expert knowledge of production equipment and facility’s support systems., • Excellent problem-solving, organizational, and communication skills., • Proficiency in maintenance management software (e.g., CMMS) and Microsoft Office Suite., • Proficient with test equipment, data managing leading to databased decision making., • Strong mathematical/analytical aptitude., • Willingness to lead by example, fostering a shared culture of efficiency with importance on meeting project commitments with on-time completion., • Ability to prioritize and multitask. Physical Demands: • Required to use hands to handle or feel objects, equipment, tools, computer controls and operational machinery., • May be required to lift and/or move up to 50 lbs., stand, bend, kneel, crouch, sit, talk, hear, and walk for a long period., • Specific vision abilities required include close vision, ability to focus. Work Environment: • Work environment in production operations facilities include close proximity to heavy machinery and pharmaceutical powders., • Required to be present in the office to collaborate with executive management, department directors, peers, and supervisors on an as needed basis., • Regular, ongoing travel throughout geographic areas on a continual basis as normal scope of role., • Employee travel/work hours/schedule/location and/or shift are subject to change based on business needs and Management discretion., • Regularly exposed to noise, dust and vibrations in a manufacturing environment; PPE may be required., • Responsible for compliance with all rules and regulations pertaining to safety policies and for leading by example with the proper attitude toward safety and health, helping to ensure that all department operations are performed with the utmost regard for the safety and health for all personnel. Supervisory Responsibilities: • Manage union and nonunion personnel Personal Protective Equipment or Attire Required for Position: • As needed. Pay Range: $80,000 - $100,000 per year

Job Description Join our Natural Organics Inc / Natures Plus Family! For more than 50 years, Natural Organics Inc. headquartered in Melville, NY has been the gold standard in natural vitamins and supplements. Marketing our products under the Natures Plus brand, we are committed to producing the finest, most effective formulations available. Our employees embody the true spirit of our Natures Plus brand. We have one goal... Bringing you high-quality products with the guaranteed potency you deserve! We are currently seeking a Package Design Manager to lead the planning, design, and execution of product packaging to ensure it is visually compelling, functionally sound, and aligned with brand strategy while meeting production and regulatory requirements. Core Responsibilities • Lead packaging design strategy to support brand identity, product positioning, and marketing objectives., • Oversee the entire packaging process from concept to final production-ready files, including artwork, copy, and structural design., • Collaborate with cross-functional teams such as marketing, product, engineering, sourcing, and suppliers to define requirements, timelines, and feasibility., • Ensure brand consistency across all packaging by enforcing brand guidelines and design standards., • Review and approve packaging artwork, copy, and visual hierarchy for clarity, compliance, and aesthetic quality., • Manage budgets, milestones, and risks for packaging projects, ensuring adherence to approved budgets, • Guide structural packaging decisions to protect products and improve usability., • Integrate sustainability goals into packaging design through material choices, waste reduction, and eco-friendly processes., • Support quality checks, press checks, and issue resolution during production. Key Skills • Creative direction and visual design expertise, • Brand consistency and marketing strategy insight, • Packaging artwork and structural design knowledge, • Print production and vendor management, • Project management and stakeholder communication, • Cost awareness and budget control, • Regulatory labeling and safety compliance, • Sustainability and environmental awareness Typical Requirements • Education: Bachelor's degree in industrial design, art, graphic design, or related field, • Experience: 5+ years in packaging design or related role, with 1-3 years in supervisory capacity, • Tools: Proficiency in design software (e.g., Adobe Creative Suite, 3D modeling), print production knowledge, and vendor coordination skills Local Candidate only for onsite position. Benefits include: Competitive salary, Medical, Dental, Vision, Life Insurance, Aflac, Short- and Long-Term Disability, 401(k) with company match, Generous paid time off days and holidays. Opportunities for professional development and growth, Discounted vitamins, and supplements. State of the art relaxation room. Job Posted by ApplicantPro

Job Description Department: Procurement / Supply Chain Reports To: Deputy General Manager Location: East Northport, NY Employment Type: Full-Time, On-Site Position Summary The Procurement Manager / Supply Chain Manager is responsible for sourcing, purchasing, and managing the flow of materials, equipment, and services required to support petroleum construction and field service operations. This role oversees vendor relationships, negotiates contracts, manages inventory and logistics, and ensures materials and equipment are available where and when needed while controlling costs and maintaining compliance with company and regulatory standards. Key ResponsibilitiesProcurement & Purchasing • Source, negotiate, and purchase materials, equipment, parts, and services needed for construction and field service projects (pipe, valves, fittings, heavy equipment, PPE, chemicals, etc.), • Develop and manage purchase orders, ensuring accuracy of pricing, quantities, and delivery timelines, • Evaluate and select vendors and suppliers based on price, quality, reliability, and delivery performance, • Monitor market trends and commodity pricing to inform purchasing strategy and timingVendor & Supplier Management, • Build and maintain strong relationships with key suppliers, vendors, and subcontractors, • Negotiate contracts, pricing agreements, and service-level agreements (SLAs), • Evaluate supplier performance through scorecards, audits, and regular reviews, • Resolve vendor disputes related to quality, delivery, or invoicingSupply Chain & Logistics, • Coordinate inbound and outbound logistics to ensure timely delivery of materials to job sites and warehouses, • Manage inventory levels across warehouses, and field locations to prevent shortages or overstock, • Track shipments and resolve delays, damages, or discrepancies, • Optimize supply chain processes to reduce lead times and transportation costsCost Control & Budgeting, • Develop and manage procurement budgets in alignment with project and operational needs, • Identify cost-saving opportunities through bulk purchasing, alternative sourcing, or process improvements, • Track and report on procurement spend, savings, and key performance indicators (KPIs), • Support project managers with material cost estimates and forecastsCompliance & Risk Management, • Ensure procurement activities comply with company policies, safety standards, and regulatory requirements (OSHA, DOT, EPA, API standards where applicable), • Maintain proper documentation for contracts, purchase orders, and vendor certifications, • Assess and mitigate supply chain risks (material shortages, single-source dependencies, price volatility), • Ensure vendors meet insurance, safety, and compliance requirements before engagementTeam Leadership, • Supervise procurement staff, warehouse/inventory coordinators, and logistics personnel, • Train team members on procurement systems, policies, and best practices, • Conduct performance evaluations and support team development, • Collaborate cross-functionally with operations, project management, and finance teamsQualificationsRequired, • 5+ years of experience in procurement, purchasing, or supply chain management, preferably within oil & gas, petroleum construction, or industrial services, • Strong negotiation and vendor management skills, • Experience with ERP/procurement systems and Microsoft Office/Excel, • Solid understanding of inventory management, logistics, and supply chain principles, • Strong analytical and budgeting skills, • Prior supervisory or team management experience Preferred • Professional certification (e.g., CPSM, CSCP, CPM), • Bachelor's degree in Supply Chain Management, Business Administration, Logistics, or related field (or equivalent experience), • Familiarity with DOT, OSHA, and environmental compliance requirements related to materials handling and transportCore Competencies, • Strong negotiation and relationship-building skills, • Analytical mindset with strong cost-control focus, • Excellent organizational and multitasking abilities, • Problem-solving skills, especially under supply chain disruptions, • Clear communicator across vendors, field teams, and leadership, • High attention to detail and accuracy in documentationPhysical / Work Requirements, • Primarily an office-based role, • Occasional travel to supplier facilities, industry events, or field locations, • Ability to work in outdoor/industrial environments when visiting sites, with appropriate PPE Benefits Include • Competitive compensation based on experience and market rates., • Medical, Dental, and Vision Insurance., • 401(k)., • Accrued paid time off and Paid Holidays., • Paid Training and professional development assistance., • Company Vehicle (based on experience)., • Uniforms and work gloves provided., • Annual work boot allowance. An Equal Opportunity Employer We do not discriminate based on race, color, religion, national origin, sex, age, disability, genetic information, or any other status protected by law or regulation. It is our intention that all qualified applicants are given equal opportunity and that selection decisions be based on job-related factors.

Job Description THE CANDIDATE MUST RESIDE IN MI, IN, OH, KY, OR WV TO BE CONSIDERED FOR THIS ROLE. About Us MAX USA Corp is a leading manufacturer of professional-grade construction and industrial tools, serving customers across North America. Known for innovation, quality, and durability, our products include rebar tying tools, pneumatic nailers, and power-driven fastening systems. We are committed to helping professionals across multiple industries improve productivity and safety on the job. As part of the global MAX Group, we combine a rich history of engineering excellence with a forward-thinking approach to growth and customer satisfaction. Position Overview MAX USA Corp is seeking a driven and experienced Regional Sales Manager to lead sales operations within the East Midwest region. This role is responsible for driving revenue growth, managing regional staff, and executing strategic initiatives aligned with the national sales plan. The ideal candidate has a proven history of success in two-step distribution sales, leading teams, and developing strategic sales plans within the industrial tools or construction industry. Key Responsibilities Own all sales activities, customer relationships, and profitability within the assigned region. Develop and implement regional and territory-level sales plans. Grow sales and profit based on National Sales Plan Recruit, train, and manage Regional Sales Executives and Jobsite Specialists for the region Search for new distributors as needed Regularly travel within the region to support field teams and customers. Represent MAX USA Corp at national and regional trade shows and industry events. Ensure timely and accurate reporting, including expense reports, dealer visit summaries, show reports, CRM updates, and sales confirmations for region. Manage promotional budget Work with Office Manager to collect past due accounts Implement MAX programs with accounts (100 PSI, Powerlite, Concrete) Must follow MAX company regulations Collaborate with engineering teams to support product research and field testing. Ensure adherence to company policies and standards Special projects per request Qualifications Education: Bachelor’s degree in business or a related field required; MBA preferred or equivalent work experience. Experience: Minimum of 5 years of sales experience, with regional or national territory experience preferred. Proven track record of managing sales teams and achieving sales targets. Proficient in Microsoft Office Suite and CRM platforms (Salesforce.com preferred). Experience developing promotions, conducting field training, and coordinating jobsite visits and open houses. Skills & Competencies: Strong leadership and people management skills. Excellent analytical, organizational, and communication skills. Ability to develop and execute effective territory management strategies. Self-starter with a proactive and collaborative approach. Physical Requirements Frequent travel within the assigned region, including overnight trips. Participation in trade shows and jobsite setup/dismantling as needed. Ability to demonstrate products in field environments. Capable of lifting and carrying heavy equipment and promotional materials. Location: The candidate must reside in MI, IN, OH, KY, or WV to be considered for this role. Salary: 100k - 130k commensurate with experience and qualifications

Job Description On-Site Supervisor Location: Islandia, NY │ Shift: Day │Pay: $26-28/hr (Weekly Pay + OT) │ Benefits: Medical, Dental, Vision Are You a Natural Problem Solver Who Loves a Challenge? Accurate Personnel is seeking a resilient, high-energy On-Site Supervisor who excels when the stakes are high. This isn’t a standard 9-to-5 role; we need a warrior who can navigate the complexities of a fast-paced warehouse environment, pivot instantly when priorities shift, and resolve workplace conflicts with professional poise. Come find out why Accurate was recently awarded as one of SIA's "Best Staffing Company to Work For" Key Responsibilities & Adaptability • Expert Conflict Resolution: Serve as the primary point of contact for resolving associate grievances, behavioral issues, and site-level disputes. You must be able to de-escalate situations in real-time while maintaining company standards, • Unmatched Availability: This role requires a "whatever it takes" mindset, you must be available for extended hours and overtime, often with little to no notice, to support our client's changing production needs, • Agile Workforce Management: Manage field employees (attendance, coaching, and terminations) in an environment where priorities can change by the hour, • Proactive Site Leadership: Walk the floor at least 3x daily to identify potential safety or personnel issues before they escalate. Monitor time clock usage for attendance and payroll, • Strategic Communication: Act as the vital bridge between the client and Accurate leadership, providing transparent reporting even during high-stress shifts Requirements & Qualifications • The "Flex" Factor: Proven ability to remain calm and effective under pressure, especially when faced with last-minute schedule changes or operational pivots, • Warehouse Veteran: At least 2 years of experience in the warehouse or industrial staffing industry. Knowledge of GMPs is a plus., • Bilingual Skills: Fluency in English & Spanish is highly preferred to effectively communicate across a diverse workforce, • Reporting & Compliance: Ability to create and edit spreadsheets, and work with Novatime or Timerack to support payroll. Support diversity and comply with EEO standards, • Decision Maker: Strong ability to work independently and make firm, fair decisions on the fly ABOUT ACCURATE PERSONNEL Everybody needs to work, but turning that work into a rewarding career is what separates Accurate Personnel from any other job. When you join our corporate team, you are joining an industry-leading company that has been a community asset for 45 years. From our origins as a boutique Chicagoland office to our current nationwide reach, Accurate Personnel has always been about helping people. Apply at Accurate and you will have everything needed to reach your full potential: competitive salaries, an outstanding bonus schedule, a work-life balance, and an excellent benefits package. If you want to make a difference in your community while building a successful career, join our team today! —-- Accurate Personnel provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Roofing Service Field Supervisor (Commercial/Industrial Roofing) CentiMark Corporation, a national leader in the commercial/industrial roofing industry, has an exceptional opportunity for a Service Field Supervisor for our Long Island NY office. Pay Range: $36 - $42 an Hour JOB DUTIES • Supervise multiple service crews, • Responsible for doing pre-job & post-job inspections, • Planning jobs for labor crews, • Responsible for setting up and maintaining a safe job site, • Daily communications with the customer, • Planning and executing a successful project, • Work closely with the Warehouse Manager in ordering materials for projects QUALIFICATIONS • Must have good working knowledge of Roofing procedures and safety, • Excellent communication/writing skills, • Computer skills and able to set up and manage multiple jobs, • Analytical, leadership, interpersonal, problem solving and organizational/time management skills, • Excellent follow-up skills, • 5 years Roofing/construction sales experience required, • 3 years of customer service experience required, • Valid State driver's license (in good standing) is required, • Experience with: EPDM, BUR, FOAM, METAL, ACRYLIC, TPO and/or SHINGLES CentiMark provides a great work environment with challenging career opportunities. We also offer competitive compensation and excellent benefits that include: Premier Benefits: • 2 Health Insurance Plans:, • Free “Core Plan” – Free Medical & Dental, • “Buy Up Plan” – Features a lower deductible for Medical, • Vision Plan, • Free Life Insurance, • 401K with Company Match, • Paid Holidays and Vacation, • Employee Stock Ownership Program (ESOP) CentiMark provides a great work environment with challenging career opportunities. Drug Free Workplace - EOE (M/F/V/D) - E-Verify Employer For more information, please visit our website -- www.CentiMark.com/jobs Powered by JazzHR 5YM1Xw4AB1

Job Description iNRCORE Group is a leading, vertically integrated provider of highly engineered, high-reliability, and high-performance passive electronic components. We are known for manufacturing proprietary magnetics, capacitors, resistors, filters, and more. We serve mission-critical data and power applications in the Defense, Aerospace & Avionics, Space, Smart Grid, Medical, AI/Data center, and Hi-Rel industrial markets. iNRCORE Group currently has fourteen (14) manufacturing facilities across the globe with more than one thousand (1000+) employees – and growing! Our business entities include company names such as Bicron, Coast Magnetics, DYCO, Gowanda, iNRCORE, Passive Plus, RCD, Sentran, TTE, and Vanguard Electronics. Our organization has a world-class reputation for innovation, quality products and expertise, and outstanding leadership. Our talented staff is what makes this all possible. We are actively seeking to hire highly skilled professionals to meet our growing demand and join our expanding team(s). We currently have an opening for Shipping & Receiving Associate in our Passive Plus Inc. facility, located in Hauppauge, NY . This role independently performs shipping and receiving activities and supports inventory accuracy and documentation. Details of the Role: The Shipping & Receiving Associate II works with limited supervision and assists with training, inventory activities, and resolution of shipping or receiving discrepancies. Duties and Responsibilities: • Independently prepare, package, and ship domestic and international orders, • Receive materials, verify accuracy, and resolve discrepancies, • Generate and review shipping documentation and carrier paperwork, • Support inventory transactions and cycle counts, • Assist with training Associate I or backup employees, • Maintain compliance with shipping, safety, and quality standards, • Other duties as assigned Qualifying Attributes and Skills • High school diploma or equivalent required;, • 2–4 years of shipping and receiving experience, • ERP and shipping system experience preferred, • Strong communication and organizational skills Physical Requirements • Ability to lift and move materials weighing up to 50 pounds, • Ability to stand, walk, bend, and reach throughout the shift, • Ability to work in a production or shipping environment iNRCORE and its affiliated entities are an equal opportunity employer with a full suite of benefits offered to full-time employees. • Excellent earning potential with qualifying annual bonuses, • Health, Dental, and Vision Benefits, • Elective Flexible Spending and Dependent Care Accounts, • Company paid and elective buy-up Life & AD&D Insurance, • Company paid Short-Term Disability and Elective Long-Term Disability, • Elective Critical Illness, Hospital Indemnity, and Supplemental Accident Coverage Benefits, • 401(k) Retirement Savings Plan with qualifying Company match, • Company paid mental health and Employee Assistance Program (EAP), • Paid Holidays and generous paid time off (PTO), • Employee Discount Program (LifeMart via ADP), • Tuition Reimbursement for qualifying degrees and certification programs. iNRCORE, LLC and its affiliated entities is an Equal Opportunity Employer. All qualified applicants will be considered.

Job Description InProduction is the leading provider of temporary seating, staging, structures, and scenic production for the U.S. live events industry. The Company is a valuable partner to event organizers throughout the entire venue transformation process, with core services including design and fabrication, delivery and installation, on-site execution, and tear down. These services span a variety of end verticals including golf, motorsports, music festivals, other sports & entertainment, and corporate events. InProduction maintains a total commitment to excellence for an exceptional outcome at every event. The Company is backed by ZMC. ZMC is a leading private equity firm comprised of experienced investors and executives who invest in, and manage, a diverse group of media and communications enterprises. Founded in 2001, ZMC’s investment philosophy centers on operational value creation driven by targeted investment themes, deep sector expertise, and strong partnerships with industry and operating executives. ZMC approaches its investments in collaboration with management teams and has a successful track record of actively adding value to portfolio companies. Come join us! Check out our web page https://inproduction.net/welcome/ This is a full time, direct hire position. We are looking for a team player! Candidates should be diligent, hardworking and have a positive attitude. • Handle incoming and outgoing shipments by checking them physically, • Check products for defects and accuracy, • Pull, pack and ship finished goods, • Load, unload, prepare, inspect and operate delivery vehicle, • Inspect machinery to determine the need for repairs and perform regular maintenance, • Unload materials and merchandise from incoming vehicles and stack them to assigned places, • Pull orders from shelves, and then place and secure onto pallet, • Communicate with managers to identify equipment in need of maintenance, • Ensure appropriate safety measures are followed, • Make sure that tools and equipment are cleaned and maintained properly at the end of each shift, • Help maintain a safe and orderly environment of the facilities, • May occasionally help on local job-sites (building and tearing down of structures and loading of trucks), • Some basic fabrication duties such as drilling, cutting and other tasks., • Other duties as required Requirements Required license or certification: • Forklift License Preferred Education Requirements: • High school or equivalent Compensation: • $19-$21 Hourly, • Overtime Pay Requirements: • Pass background check and drug screening requirements, • Bi-lingual in Spanish and English preferred, • Familiar with basic hand tools, • Pay attention to detail and become familiar with industrial equipment, • Able to work overtime occasionally, • Able to read and understand safety instructions, • Forklift experience and license preferred, • Willing to complete forklift training preferred, • Experience with the loading and unloading of trucks preferred (flat-beds and/or trailers), • Small engine repair and maintenance skills preferred but not required, • Stand continuously for long periods of time, • Able to repeatedly lift-up to 75Ibs Work Environment • Is exposed to excessive noise, • Is around moving machinery, • Is exposed to dust, • May be required to work outdoors, • Wearing of safety clothing and equipment may at times be required Benefits • Medical, Dental, and Vision Insurance, • Short Term Disability, • 401K, • Paid Holidays, • Floating Holiday

Job Description Imagine a company that recognizes excellence in not only the products it sells, but also in its employees. R.S. Hughes Company, Inc. is that company. We hold ourselves to the highest standards of quality and professionalism — and we treat our employees like the valuable assets they are. Founded in 1954, R.S. Hughes Co., Inc. is a dynamic, North American distributor of industrial supplies. With multiple warehouse sites located across the United States and Mexico, we maintain an extensive inventory of adhesives, abrasives, electrical, static control, tapes, labeling and safety products. In addition to competitive salaries and benefits, we offer an environment that asks you to make a difference. We value hard work and common sense, and we consistently reward those that exemplify these traits. If you're looking for a great team to grow with and if you are willing to embrace the challenges of being expected to be the best, we welcome you to come join the R.S. Hughes Company, Inc. team! Job Summary The Warehouse Associate II supports daily warehouse logistics to operate at maximum efficiency. This position is primarily responsible for various warehouse tasks such as shipping and receiving, inventory management, and customer order fulfillment. This role is expected to adhere to all company policies and safety protocols. Core Responsibilities Order Fulfillment · Manage order pulling by pulling customer orders from warehouse shelves, ensure accuracy based on the item number, serial numbers, size, quantity, etc. · Pulling and loading for SupplySight. · Manage Will Calls · Perform checks and balances to confirm physical inventory counts match the inventory records. Perform regular count (Cycle Counts - 1st count). Receiving and Unloading · Receive (physically) warehouse orders, inspect items received, match the delivery to a purchase order, log received items into warehouse management system and follow up on orders in case of delays. · Promptly load and unload palletized freight; move products and supplies from receiving or storage area to shipping to other designated areas. · Organize and maintain stock orders prior to shelving. · Stock shelves in an efficient and organized way. · Perform checks and balances to confirm physical inventory counts match the inventory records. Perform regular count (Cycle Counts - 2nd count. · Handle Non-Conforming Products as per Company policies and procedures (Handle and Disposal) and in accordance with OSHA and internal protocols. · Clean, stock and supply designated facility areas (Warehouse Cleaning & Organization). · Maintain and organize warehouse shelving for optimal operational efficiency; check shelf-life for expiration and dispose inventory in accordance with health and safety standards. · Ensure warehouse facility and designated work area remain clean; practice good housekeeping habits that promote a healthy, safe work environment. · Safely operate motorized forklift and standard warehouse equipment; conduct daily checkpoint inspections for proper and safe operation. Shipping · Manage shipment and receipt of all products, materials, and supplies via UPS, FedEx, and other freight companies. · Label orders and prepare for shipping while properly handling hazardous and non-hazardous items in accordance with OSHA and internal protocols. · Perform final inspection after the product is shipped out. Quality Control · Promote operational excellence and identify opportunities for process improvements; perform quality assurance checks. · Inspect products for defects and damages. · Proactively involve Operations Manager to address issues, as well as inventory and supplies needs. · Ensure proper Product Certifications and Safety Data Sheets are included on each order where applicable. · Must be Hazmat Certified and oversee the packing and shipping of hazardous materials. Coaching & Mentoring (Training) · Conducts warehouse observations, demonstration lessons/best practices, provides feedback to employees. · Train and mentor employees in accordance with standard operating procedures (SOPs) and ensure employees receive the appropriate training to effectively perform job duties. · Coach employees to enhance, support and facilitate their individual development and growth. Additional Assignments · Perform various administrative tasks related to paperwork, credit card processing, shipping (Haz Certified) & Verifications, unconfirmed shipments, etc. · Handle the processing of credit card transactions at the time of shipment. · Assist operations in WTDO/WT in shipped & picked Stage. · Perform data entry - Receiving (Into ERP system) · Organize monthly hazmat meetings. · Manage warehouse Equipment Maintenance. · Conduct inventory counts daily. · Receive product into the ERP system to ensure inventory accuracy. · Track and ensure timely processing of both outgoing and incoming warehouse to warehouse transfers. · Other job duties as assigned. Basic Qualifications · High School diploma or GED equivalent · At least 2 to 5 years of related experience and/or training. Knowledge of international shipping/ export procedures highly preferred. Skills Soft Skills · People and Communication Skills · Self-motivated and works well in a team environment. · Able to work with a diverse group of people. · Excellent attention to detail and accuracy, · Quick learner. · Problem Solving. · Multitasking: Ability to multitask and perform duties with accuracy. · Cleaning and organizing skills. · Time Management. · Mentoring & Coaching (Training). Hard Skills · Heavy Equipment/Machine Operation: ability to operate standard warehouse equipment (i.e. forklift, hand truck, pallet jack, pallet ramp, etc.) · Order fulfillment | Receiving and Unloading | Packing | Shipping · Inventory Control Records Keeping: physical inventories and cycle counts; make key inventory adjustments on a computer. · Problem Solving. · Products Inspection (Defects/Damages). · Must have basic mathematical skills. · Data Analysis (cycle counts, freight invoices, etc.) · Warehousing System experience / data entry / knowledge. · MS Excel, MS Word. · UPS and FedEx shipping web · Intermediate Knowledge of Safety Compliance · Proper PPE Use. Certifications & Licenses · Hazmat Certified · Forklift Certified or minimum of 2 years’ experience operating some type of warehouse equipment. (i.e. forklift, hand truck, pallet jack, etc.) Physical Requirements · Ability to operate standard warehouse equipment (i.e. forklift, hand truck, pallet jack, etc.) · Ability to lift/pull/push up to 100 lbs. · BODY MOVEMENTS: The employee must have a full range of body movements including the use of his/her hands to finger, handle, and feel objects such as computer equipment. The ability to bend the body, to reach for objects, and to crouch when needed are also required. · VISION: Specific vision abilities required include close vision, depth perception, and the ability to adjust focus. Working Conditions · Working in a warehouse mainly requires manual labor. Warehouse associates frequently work on their feet and may do a substantial amount of lifting over a long shift. Being in sound physical shape is usually desired. Target Base Compensation range for this non-exempt role is $22.00 - $24.00 hr. DOE. This is a Full-Time position, eligible to participate in the Company’s benefit plans including: Paid Time off; major medical, dental, vision; Company paid short-term and long-term disability; paid parental leave; various supplemental benefit plans; and Employee Stock Ownership Program (ESOP).

Job Description Warehouse Associate To safely and accurately receive, store, pull and ship product and orders using established Lindenmeyr Munroe (“Company”) inventory policies and procedures and order pick systems. ESSENTIAL FUNCTIONS: • Performs Company established power industrial truck safety check of assigned material handling equipment at beginning of shift., • Inspects, fills and stages product for order fulfillment using radio frequency equipment (“RFE”)., • Manually counts sheets of paper or uses a scale to measure required number of sheets per order. Repackages loose sheets (boxes or wraps in paper)., • Transfers full/partial boxes onto shipping pallet., • Verifies quantities pick to actual order, checking for shortages and/or damage., • Prepares product for safe shipping by labeling, packing and wrapping when necessary., • Uses power industrial/material handling equipment to move pallets to dock or dock to delivery truck., • Receives merchandise, properly checks and puts stock in its proper location on a daily basis., • Assists others as necessary (other warehouse members, customers, couriers in call area, sample staff)., • Adheres to all established safety rules and regulations. Immediately reports any safety hazards/work related injuries to supervisor., • Computer/RFE skills. SKILLS AND ABILITIES: The physical demands described here are representative of those that must be met by the individual to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Rarely: 0-5% of the time in an 8-hour workday, • Occasionally: 6-33% of the time in an 8-hour workday, • Frequently: 34-66% of the time in an 8-hour workday, • Constantly: 67-100% of the time in an 8-hour workday Standing: Frequently. Periods of standing are required for up to several minutes at a time (e.g., while driving forklift truck). Order pickers are on their feet all day and they are moving constantly (except when driving the forklift truck). Walking: Frequently. Warehouse floor is concrete. Distances may vary Climbing: Occasionally. Step up and off forklift platform. Sitting: Frequently. Periods of sitting are required while driving sit-down Hilo to unload trucks and directly put away in bulk locations. Lifting/Carrying: Occasionally. Up to 70 pounds at various heights and distances: • from shoulder height to ground, • from waist height to ground, • from waist height to shoulder height, • from waist height or lower to waist height or lower Pushing/pulling: Occasionally. Manipulate up to 160 pounds of product: • sliding box off pallet to hand truck, • sliding box from waist height to ground, • sliding box from waist height to waist height Pushing/pulling Frequently. Using hand truck and manual pallet jack to move loads of 5 cartons or more. Bending: Occasionally. While operating dock leveler controls, moving product from pallet to hand truck, scanning product while using RF equipment, opening and closing dock leveler, unwrapping pallet, and occasionally to open rear door Reaching: Occasionally. To access boxes on pallet. Crouching/kneeling: Rarely. Up to a few minutes at a time while performing safety inspection or verifying product. Balancing: Occasionally. Walking on uneven surfaces. Looking up: Frequently. While pulling orders or put away of product in upper levels of rack. Specific Tasks: • Open and close rear door of truck: Occasionally., • Maneuver hand truck (push/pull/steer/tilt): Frequently. Unloaded and loaded (up to 5 cartons)., • Operate Manual/powered walk-behind pallet jack including hand controls while moving product and/or skids in excess of 2,000 lbs : Frequently. Unloaded and loaded Reading: Frequently. Read orders on RF equipment and product labels. Scanning: Frequently. Scan product label to confirm proper item picked QUALIFICATIONS AND REQUIREMENTS: • High school diploma or general education diploma., • Ability to operate power industrial and material handling equipment., • Ability to maintain simple logs and records., • Physically able to lift up to 70 lbs in order to load and deliver product., • Proficient in basic math skills to include units of measurements, multiplication, division and subtraction., • Ability to work in a fast paced environment with minimal supervision.., • CDL Class A license with a minimum of 1 years driving experience a plus Job Type: Full-time Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee assistance program, • Employee discount, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Tuition reimbursement, • Vision insurance

Job Description Warehouse Associate 2nd Shift - Monday - Friday 3:30pm - 12am Pay: $19.50 (weekly pay) Assist in wrapping/boxing, etc. as needed daily Job Summary: Performs the physical and/or administrative tasks involved in the shipping, receiving, storing, distributing and order fulfillment of merchandise, products, materials, parts, supplies and equipment. Essential Duties and Responsibilities: • Performs quality checks on outbound and inbound shipments., • Performs outbound staging and packing in accordance with site policies., • Executes ERP system transactions on outbound and inbound shipments., • Updates FMS for parcel and freight shipments., • Learns to use handheld RF scanners and Warehouse Management System to fulfill orders., • Maintains inventory accuracy., • Handles and controls hazardous material on both inbound and outbound., • Complies with 5S safety, housekeeping practices, and regulations., • Completes all required safety training and follows protocol in all risk situations., • Uses Personal Protective Equipment (PPE) appropriate to tasks at hand., • Lifts up to 75 pounds unassisted., • Certification on powered industrial trucks including work assist vehicle (WAV), off the ground order picker (up to 35' off the ground), reach truck, dock stocker and powered pallet jacks., • Creates repair RMA's, manages receiving and shipment issues within repair systems., • Develops familiarity with a subset of products, processes, operational metrics and software tools; learns and follows basic work instructions for functional assignments according to productivity and quality standards, • Provides input geared towards continuous improvement, work instruction documentation, and standardization of processes., • Resolves a variety of basic problems of limited complexity under direct supervision and performs rudimentary analysis involving a limited number of factors., • Performs activities to evaluate and maintain equipment., • Creates expense orders for internal repair consumption., • Full knowledge of ISO requirements and demonstrated ability to ensure compliance with external auditors., • Performs other duties as assigned Note: The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of responsibilities, duties, abilities, and skills required of personnel so classified. Job Requirements: • Minimum Education: o High School Diploma or GED preferred but not required • Minimum Work Experience (years): o 1 year of experience • Key Skills and Competencies: o Effective communication skills o Basic computer literacy, with knowledge of Microsoft Office o Proficient understanding of the use of a desktop o Basic math skills, can read a ruler o Fundamental reading and writing skills required

Job Description Benefits/Perks • Competitive Compensation, • Great Work Environment Job Summary We are seeking an Industrial Machine and Maintenance Mechanic to join our team! We are a local manufacturing company located in Bay Shore, as a Mechanic, you will work a variety of industrial machinery and equipment, following all safety guidelines and job specifications to ensure projects are completed both safely and on time. You will also perform and record regular maintenance on our equipment, report any defects or issues immediately, and keep equipment in good, clean working order. The ideal candidate should work well in a team environment and maintains the highest safety standards. Responsibilities • Safely operate a variety of large, heavy machinery safely, • Maintain all equipment used, including cleaning and regular maintenance, • Work closely with the rest of the team on each project to ensure successQualifications, • Strong communication skills, • Strong attention to detail, • The ability to work well within a team environment

Job Description Position Summary The Maintenance Technician III is a senior-level, hands-on maintenance professional responsible for diagnosing, repairing, and maintaining manufacturing equipment, utilities, and facility systems to ensure safe, reliable, and compliant operations. This role serves as a technical expert and escalation point for complex mechanical, electrical, and controls issues, while supporting preventive maintenance execution and reliability improvements across the site. With a strong commitment to Grandma Quality, the Maintenance Technician III demonstrates pride in workmanship, accountability, and leadership by example. This role partners closely with Operations, FSQA, Sanitation, and Reliability to minimize downtime, support food safety, and ensure equipment and facility systems are production-ready at all times. Key Responsibilities • Perform advanced troubleshooting, repair, and maintenance of manufacturing equipment, automation systems, and utilities, including mechanical, electrical, pneumatic, hydraulic, and controls systems., • Serve as a senior technical resource for complex or recurring equipment failures, providing root cause analysis and sustainable corrective actions., • Execute and support preventive and predictive maintenance activities to improve equipment reliability, uptime, and asset life., • Lead or support equipment changeovers, installations, rebuilds, and modifications to support operational needs and continuous improvement., • Mentor and support Maintenance Technician I and II team members through on-the-job training and knowledge sharing., • Maintain, troubleshoot, and repair facility and utility systems including HVAC, refrigeration, compressed air, plumbing, steam, electrical distribution, and wastewater-related equipment, as applicable., • Ensure all maintenance work complies with safety standards, food safety requirements, GMPs, and company policies., • Document work orders, repairs, inspections, and parts usage accurately in the CMMS., • Support FSQA inspections, audits, and corrective actions related to equipment condition and maintenance practices., • Coordinate with contractors and vendors to ensure safe, compliant, and high-quality work., • Respond promptly to equipment breakdowns to minimize production downtime., • Reinforce a culture of safety, craftsmanship, accountability, and respect. Qualifications • High school diploma or GED required; technical or vocational training preferred., • 5+ years of progressive maintenance experience in a manufacturing or industrial environment., • Advanced knowledge of mechanical, electrical, pneumatic, hydraulic, and basic PLC systems., • Ability to independently diagnose and repair complex equipment issues., • Experience in food manufacturing or regulated environments preferred., • Ability to read electrical schematics, mechanical drawings, and technical manuals., • Strong problem-solving skills and attention to detail., • Ability to work independently and collaboratively with cross-functional teams. Essential Physical Requirements • Ability to stand, walk, bend, kneel, and climb for extended periods., • Ability to safely navigate ladders, platforms, catwalks, and rooftops., • Ability to lift, push, pull, or carry up to 50 pounds., • Ability to work in varying environmental conditions including temperature extremes, noise, and humidity., • Ability to wear required PPE., • Ability to work nights, weekends, holidays, or extended hours as required., • Ability to communicate clearly and effectively verbally and in writing. This job description is intended to describe the general nature and level of work being performed. It is not an exhaustive list of all responsibilities, duties, or skills required. Duties, responsibilities, expectations, and reporting structures may change at any time based on business needs, organizational priorities, or operational requirements, with or without notice.

Job DescriptionDescription: Northeast Aero Compressor and PG Aerotech are seeking an experienced Facilities Technician II to help maintain the safe, compliant, and efficient operation of our 55,000 square foot FAA Part 145 certificated repair station and MRO facility in Hauppauge, NY. This is a mid-level, hands-on role for a technician who has moved beyond entry-level building maintenance and is ready to take on greater ownership of preventive maintenance programs, more complex mechanical and electrical troubleshooting, and vendor coordination — while continuing to perform daily hands-on repair and upkeep work. The Facilities Technician II reports to the Production Manager and works closely with them to keep all building systems, ground support equipment, and industrial machinery running reliably. Requirements: • Perform routine and corrective maintenance on HVAC, electrical, plumbing, lighting, and overhead door systems, escalating only the most complex issues to the Facilities Supervisor, • Execute scheduled Preventive Maintenance (PM) tasks and help maintain accurate maintenance logs, service records, and equipment histories in compliance with repair station requirements, • Diagnose and troubleshoot mechanical, electrical, and pneumatic/hydraulic issues on industrial equipment and aviation ground support equipment, • Assist in coordinating third-party vendors and contractors for specialized inspections, certifications, and repairs, • Perform general building maintenance including carpentry, painting, minor structural repairs, and groundskeeping/snow removal as needed, • Conduct routine facility and safety inspections, identify hazards or worn components, and proactively address or report them, • Support the cleanliness and organization of the facility, including production floor, offices, break rooms, restrooms, and grounds, • Help ensure fire and life-safety systems are functioning correctly and are tested/documented on schedule, • Operate company vehicles and material handling equipment (e.g., forklift) to move tools, parts, and supplies between areas or job sites, • Maintain compliance with FAA Part 145 repair station requirements, OSHA regulations, EPA standards, and applicable building codes, • Respond to maintenance requests from building occupants and prioritize/resolve issues promptly Experience and Skills • 2–5 years of experience in building/facilities maintenance, industrial maintenance, or a related mechanical/electrical trade; aviation, manufacturing, or regulated-facility experience preferred, • Working knowledge of HVAC, electrical, and plumbing systems, with demonstrated ability to independently troubleshoot and repair common issues, • Some exposure to industrial equipment such as compressed air systems, generators, or pneumatic/hydraulic equipment preferred, • Comfortable using hand and power tools safely and effectively, with strong mechanical aptitude and problem-solving skills, • Ability to work independently on assigned tasks while collaborating with the Facilities Supervisor on larger projects, • Strong communication and customer service skills when responding to occupant requests, • Ability to pass a pre-employment and random drug and alcohol screening as well as a background check Physical Requirements • Ability to lift at least 50 pounds, • Comfortable working at heights on ladders and lifts, and in confined spaces, outdoor environments, and varying temperatures, • Manual dexterity and ability to constantly manipulate small to medium components, • Ability to stand, walk, bend, and climb stairs for extended periods, • Frequent use of hand tools, power tools, and cleaning/lubricating/painting chemicals Education / Licenses / Certifications • High school diploma or GED required; trade school training or an associate degree in a mechanical, electrical, or facilities-related discipline preferred, • Valid state driver's license with a clean driving record required, • Forklift certification preferred, or ability to obtain within 30 days of hire, • OSHA 10-Hour (or higher) General Industry certification preferred, or willingness to obtain Compensation and Benefits • Full-time, hourly position: $28–$34 per hour, commensurate with experience, skills, and certifications, • This range reflects a mid-level role positioned between our entry-level Facilities Technician/Driver and our Facilities Supervisor, based on current Long Island / Hauppauge, NY market data for facilities and building maintenance technicians, • Medical, dental, vision, and life insurance options, • 401(k) with 100% match on the first 4%, • Paid holidays, vacation, and sick/personal leave accrued from date of hire, • Training/education budget, gym reimbursement, complimentary drinks, company events, and philanthropy opportunities

Job DescriptionBenefits: • 401(k), • Competitive salary, • Dental insurance, • Health insurance, • Paid time off, • Training & development, • Vision insurance, • Wellness resources REPORTS TO: Maintenance Manager HOURLY RATE: $28.00- $45.00 TERMS OF EMPLOYMENT: Permanent | Full-Time, 12- hour Shift LOCATION: Copiague, NY About Us We provide full-service contract manufacturing, bottling, and packaging solutions for gummy natural health products, supporting clients from concept through launch. Operating within a regulated manufacturing environment, we are committed to quality, compliance, and continuous improvement. The Opportunity The Maintenance Technician is responsible for maintaining, troubleshooting, and repairing production equipment, utilities, and facility systems to support safe, reliable, and efficient operations in a GMP-regulated gummy manufacturing facility. This role performs preventive maintenance, responds to equipment issues, supports regulatory and food safety compliance, and partners with cross-functional teams to maximize equipment uptime and drive continuous improvement. What Success Looks Like • Consistently maintain equipment reliability and uptime through effective preventive maintenance and rapid troubleshooting., • Complete maintenance work safely and compliantly while adhering to GMP, food safety, and company safety requirements., • Respond quickly and effectively to equipment issues to minimize downtime and support production targets., • Identify and implement continuous improvement opportunities that enhance equipment performance, efficiency, and reliability. RESPONSIBILITIES: • Responsible for installation, maintenance and repair of machinery and mechanical equipment., • Maintain all types of equipment through a preventative maintenance program and log all details into a CMMS database. (Limble), • Read, interpret, and follow instructions and operation manuals., • Maintain a safe, clean, and organized work area., • Read blueprints and sketches proficiently to fabricate equipment and make modifications., • Repair or replace chains, belt conveyors, gear boxes/drive chains, hydraulics & pneumatics, welding/cutting, and use power tools., • Maintain HVAC systems, water softener systems, chiller units and other utilities., • Prioritize safety in approach to all work activities., • Focus on Continuous Improvement to streamline work processes. QUALIFICATIONS: Experience & Education • Highschool graduation or GED required, 2-year related diploma preferred., • At least 2 years’ experience in equipment repair, maintenance and troubleshooting in a manufacturing environment, food manufacturing preferred. Technical Skills, • Knowledge of mechanical equipment, electromechanical or controls experience preferred., • Experience with industrial electrical components is required, • Experience with electrical, HVAC and chiller systems would be considered an asset., • Must be able to read, write, and understand English., • Excellent problem-solving and communication skills Working Conditions and Physical Requirements • Willingness to work shift schedule including nights, weekends and overtime as required., • Must be able to wear all required personal protective gear., • Stoop, reach, kneel or crouch., • Exposure to moving mechanical parts., • Exposure to excessive noise and some hazardous materials., • Lift 25+ pounds overhead, • Turn, bend, reach, pull, and walk., • Stand for extended periods of time; up to 12 hours. This job description is not intended to be all-inclusive. Employees may be required to perform other job-related duties as needed to meet business, operational, quality, safety, or regulatory requirements. Our Commitment to Inclusive Hiring We are committed to building an inclusive and accessible workplace. We welcome applications from individuals of all backgrounds and experiences. Accommodations are available throughout the recruitment process upon request.

Job Description Position Summary The Maintenance Technician III is a senior-level, hands-on maintenance professional responsible for diagnosing, repairing, and maintaining manufacturing equipment, utilities, and facility systems to ensure safe, reliable, and compliant operations. This role serves as a technical expert and escalation point for complex mechanical, electrical, and controls issues, while supporting preventive maintenance execution and reliability improvements across the site. With a strong commitment to Grandma Quality, the Maintenance Technician III demonstrates pride in workmanship, accountability, and leadership by example. This role partners closely with Operations, FSQA, Sanitation, and Reliability to minimize downtime, support food safety, and ensure equipment and facility systems are production-ready at all times. Key Responsibilities • Perform advanced troubleshooting, repair, and maintenance of manufacturing equipment, automation systems, and utilities, including mechanical, electrical, pneumatic, hydraulic, and controls systems., • Serve as a senior technical resource for complex or recurring equipment failures, providing root cause analysis and sustainable corrective actions., • Execute and support preventive and predictive maintenance activities to improve equipment reliability, uptime, and asset life., • Lead or support equipment changeovers, installations, rebuilds, and modifications to support operational needs and continuous improvement., • Mentor and support Maintenance Technician I and II team members through on-the-job training and knowledge sharing., • Maintain, troubleshoot, and repair facility and utility systems including HVAC, refrigeration, compressed air, plumbing, steam, electrical distribution, and wastewater-related equipment, as applicable., • Ensure all maintenance work complies with safety standards, food safety requirements, GMPs, and company policies., • Document work orders, repairs, inspections, and parts usage accurately in the CMMS., • Support FSQA inspections, audits, and corrective actions related to equipment condition and maintenance practices., • Coordinate with contractors and vendors to ensure safe, compliant, and high-quality work., • Respond promptly to equipment breakdowns to minimize production downtime., • Reinforce a culture of safety, craftsmanship, accountability, and respect. Qualifications • High school diploma or GED required; technical or vocational training preferred., • 5+ years of progressive maintenance experience in a manufacturing or industrial environment., • Advanced knowledge of mechanical, electrical, pneumatic, hydraulic, and basic PLC systems., • Ability to independently diagnose and repair complex equipment issues., • Experience in food manufacturing or regulated environments preferred., • Ability to read electrical schematics, mechanical drawings, and technical manuals., • Strong problem-solving skills and attention to detail., • Ability to work independently and collaboratively with cross-functional teams. Essential Physical Requirements • Ability to stand, walk, bend, kneel, and climb for extended periods., • Ability to safely navigate ladders, platforms, catwalks, and rooftops., • Ability to lift, push, pull, or carry up to 50 pounds., • Ability to work in varying environmental conditions including temperature extremes, noise, and humidity., • Ability to wear required PPE., • Ability to work nights, weekends, holidays, or extended hours as required., • Ability to communicate clearly and effectively verbally and in writing. This job description is intended to describe the general nature and level of work being performed. It is not an exhaustive list of all responsibilities, duties, or skills required. Duties, responsibilities, expectations, and reporting structures may change at any time based on business needs, organizational priorities, or operational requirements, with or without notice.

Job DescriptionDescription: Position Summary Are you a skilled mechanic or technician looking for an exciting opportunity in the pharmaceutical industry? Join our team and play a key role in keeping our state-of-the-art manufacturing and packaging equipment running at peak performance. You’ll work hands-on with advanced machinery, help maintain facility upgrades, and be part of a collaborative team that produces critical healthcare products. Job Type: Full-Time Location: Hauppauge, NY Works Hours: Monday – Friday, 8:00AM – 4:30PM; 4:30PM - 1:00AM Pay Range: $24.00 - $40.00 per hour, depending on experience and shift Start Date: ASAP What Makes This Role Exciting • Work on high-tech, industrial-level equipment in a regulated pharmaceutical environment., • Be part of a team that produces products impacting consumer health and well-being., • Opportunity to troubleshoot and solve complex mechanical and electrical challenges., • Hands-on experience with cutting-edge machinery and automation systems., • Career growth potential in a company that values skill development and cross-training. Why Join CPC? At CPC, you’ll be part of a team that has set the standard in pharmaceutical development and contract manufacturing since 1971, helping bring high-quality OTC, dietary supplement, and prescription products to market faster and safer than ever. We pride ourselves on quality as a core value, innovative problem-solving, and a collaborative culture where everyone plays a role in advancing formulation and manufacturing excellence. CPC offers an inclusive, respectful workplace with opportunities to grow your skills and career while working with cutting-edge technologies and serving leading global brands. With a commitment to employee success, competitive benefits, and a culture built on teamwork and integrity, CPC is a place where your contributions truly make an impact. Requirements: Responsibilities In this role, you will: • Perform repairs, overhauls, and preventive maintenance on manufacturing and packaging equipment with minimal supervision., • Troubleshoot and diagnose mechanical and electrical issues efficiently., • Respond to emergency or unscheduled repairs to keep production running smoothly., • Maintain and upgrade facility equipment as required., • Safely use a variety of hand and power tools., • Document maintenance work and maintain equipment for optimal performance., • Assist in compiling operating instructions or standard procedures for equipment., • Support the team and take on additional responsibilities as assigned. Education and Experience • High school diploma or GED required; trade school or college coursework preferred., • Minimum 2 years of hands-on experience with MIG/TIG welding, mills, turning machinery, or other industrial equipment., • Experience in pharmaceutical manufacturing or packaging is a plus. Skills, Knowledge, and Abilities: • Ability to read and interpret electrical schematics and mechanical diagrams., • Familiarity with PLCs (Programmable Logic Controllers) and VFDs (Variable Frequency Drives)., • Strong attention to detail and commitment to quality., • Ability to work independently or as part of a team., • Knowledge of company SOPs, GMPs, and safety guidelines., • Understanding of industrial production systems and machinery operations.

This Jobot Job is hosted by: Merwan Zattam Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $110,000 - $135,000 per year A bit about us: We exist to make better buildings faster. We are part of a larger framework - Design Manufacture Construct (DMC) - that guide building design so that construction can leverage manufacturing productivity. We’re made up of smart architects, engineers, manufacturers, programmers, and other generalists that are united by the notion that to make great things intelligently is a worthy pursuit. We are seeking a talented and energetic Architects to join our design group. Job description: As a Program Architect, you will work with project teams in a dynamic, rapid-growth work environment with bright and talented engineers, architects, designers, builders, crafters, and manufacturers to improve and deploy a prototype building program and to build an alternative to the traditional construction industry. From desk to factory floor to job sites and client meetings, you will be challenged to develop your skills in a new field, taking a critical role in project delivery via the DMC methodology Why join us? We offer the full spectrum of comprehensive benefits including: health, dental, and vision insurance. We also offer flexible spending accounts, paid time off, short term disability, long term disability, life insurance and a 401k plan. Job Details MEP Engineering Manager Position Overview The MEP Engineering Manager is responsible for leading and managing a multidisciplinary team of mechanical, electrical, and plumbing engineers responsible for the design, coordination, and execution of building systems across multiple construction and manufacturing projects. This role provides technical leadership, ensures engineering quality and compliance, and drives collaboration across design, manufacturing, and construction teams to deliver efficient, high-performing building systems. The ideal candidate brings strong leadership experience, deep technical expertise in MEP systems, and a proven ability to manage complex projects within fast-paced design-build or manufacturing environments. Key Responsibilities Leadership & Team Management Lead, mentor, and develop a team of MEP engineers, designers, and technical specialists. Establish engineering standards, workflows, and best practices across MEP disciplines. Manage team workload, project assignments, and resource planning. Support professional development and performance management initiatives. Engineering Design & Technical Oversight Provide technical leadership for mechanical, electrical, plumbing, and fire protection system design. Review and approve engineering calculations, drawings, and specifications to ensure accuracy and compliance with applicable codes and standards. Oversee system integration and coordination across building systems and disciplines. Ensure designs support constructability, manufacturability, and operational efficiency. Project Delivery & Coordination Collaborate with architectural, structural, manufacturing, and construction teams to support project execution. Participate in project planning, scheduling, and design phase coordination. Support design-build and modular/offsite construction workflows. Provide technical support during procurement, fabrication, installation, and commissioning phases. Assist with resolving field issues, RFIs, and design modifications. Quality, Compliance & Continuous Improvement Ensure compliance with industry codes, regulatory requirements, and internal engineering standards. Implement quality assurance and quality control processes for engineering deliverables. Identify opportunities for system standardization and continuous improvement. Support development of engineering documentation, specifications, and design libraries. Stakeholder & Client Engagement Serve as a technical liaison between internal teams, clients, contractors, and external engineering partners. Participate in design reviews and technical presentations with stakeholders. Support value engineering initiatives and cost optimization strategies. Required Qualifications Bachelor’s degree in Mechanical Engineering, Electrical Engineering, or related engineering discipline. 8+ years of experience in MEP engineering, building systems design, or related field. 3+ years of leadership or team management experience. Strong knowledge of building systems including HVAC, power distribution, plumbing, fire protection, and controls systems. Experience supporting design-build, industrial, healthcare, or commercial construction projects. Strong understanding of applicable codes, standards, and regulatory requirements. Experience coordinating multidisciplinary engineering teams. Strong problem-solving, organizational, and communication skills. Preferred Qualifications Professional Engineer (PE) license strongly preferred. Experience in modular, offsite, or prefabricated construction environments. Experience with healthcare or mission-critical facility design. Familiarity with commissioning processes and building performance validation. Experience working with BIM and building systems modeling tools. Experience leading engineering teams supporting manufacturing or production environments. Technical Skills MEP system design and analysis BIM and design coordination platforms Building and energy code compliance Construction documentation and submittal review Engineering quality assurance and standardization Cross-functional design and construction coordination Leadership Competencies Ability to lead and inspire technical teams Strong collaboration and communication skills Strategic thinking and process improvement mindset Ability to manage multiple projects and priorities Strong focus on quality, safety, and operational performance What Success Looks Like Delivery of high-quality, code-compliant MEP designs across projects Effective coordination between engineering, manufacturing, and construction teams Improved engineering efficiency and standardization Successful mentoring and development of engineering staff Reliable system performance and client satisfaction Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job DescriptionJob SummaryWe are a general contractor specializing in commercial and industrial construction projects, seeking an experienced Project Manager to join our team. The ideal candidate is proactive, organized, and adaptable, with the ability to manage multiple projects while maintaining strong communication and attention to detail. Responsibilities • Oversee and manage all phases of construction projects, ensuring successful completion within scope, budget, and schedule., • Develop and manage project schedules and budgets, making adjustments as needed to meet project goals., • Coordinate with CEO, superintendents, assistant project managers, subcontractors, vendors, and clients to keep projects moving efficiently., • Conduct regular job site visits to monitor progress, quality, safety, and compliance with project plans and specifications., • Identify and resolve project issues, conflicts, and delays in a timely manner to maintain project progress., • Manage and track project documentation, including contracts, change orders, RFIs, submittals and shop drawings, ensuring timely distribution., • Monitor project costs, change orders, subcontractor performance, and overall project financials., • Maintain accurate and up-to-date information within project management software and communicate project updates to the appropriate team members., • Build and maintain strong relationships with clients, subcontractors, vendors, and project partners., • Provide direction and delegate responsibilities to Assistant Project Managers to support project efficiency and successful completion., • Oversee project closeout, ensuring punch list items are completed and providing guidance to the Assistant Project Manager on closeout documentation as needed., • Perform additional duties as needed to support successful project execution and client satisfaction. Qualifications, • Minimum of 5 years of Project Management experience in commercial and/or industrial construction., • Bachelor’s degree in Construction Management or a related field preferred., • Experience with construction project management software required., • Proficient in Microsoft Word, Excel, and Outlook., • Ability to effectively manage multiple projects, priorities, and deadlines., • Strong organizational skills with excellent attention to detail., • Excellent written and verbal communication skills., • Self-starter with a strong work ethic who takes initiative and works well both independently and as part of a team., • Ability to work effectively in a fast-paced environment. Benefits/Perks, • Salary Range: $90,000 - $120,000 depending on experience., • Health, dental, and vision insurance with employer contribution., • Paid time off and paid holidays., • Annual performance-based bonus., • 401(k) with company match.

Mini-Circuits designs, manufactures and distributes integrated circuits, modules, and sub-systems for high performance radio frequency (RF) and microwave applications. With design, sales and manufacturing locations in over 30 countries, Mini-Circuits' products are used in a range of wired and wireless communications applications. Our products are also used in detection, measurement and imaging applications, including military communication, guidance and electronic countermeasure systems, commercial, scientific, military land, sea and aircraft, automotive systems, medical systems, and industrial test equipment. Mini-Circuits' sells its products to over 20,000 customers globally through our direct sales force, applications engineering staff, sales representatives, as well as through our extensive web site. Position Summary: The Production Control Planner plays a critical role in ensuring efficient and timely production flow by developing, coordinating, and maintaining comprehensive supply and production plans. This role supports the successful execution of demand forecasts and ensures the availability of components and materials to meet customer delivery schedules. The Production Control Planner is responsible for reviewing and executing MRP signals, optimizing inventory, and coordinating closely with cross-functional teams including procurement, manufacturing, logistics, engineering, and quality assurance. This position reports to the Production Control Manager. Salary Range: $75,000 - $90,000 per year • Production & Supply Planning Execution, • Develop, maintain, and execute production control plans aligned with demand forecasts, master production schedules, and customer requirements., • Convert MRP signals into actionable production orders and material requirements., • Actively monitor and address production and supply issues to prevent disruptions to the manufacturing process or customer deliveries., • Inventory Optimization & Continuous Improvement, • Analyze inventory levels, safety stock, and lead times to maintain optimal inventory while minimizing excess and avoiding shortages., • Lead and support continuous improvement initiatives aimed at enhancing planning accuracy, reducing costs, and increasing operational efficiency., • Capacity Planning & Scheduling, • Collaborate with production and operations teams to create accurate and executable production schedules., • Identify and mitigate capacity constraints to maintain a balanced and efficient manufacturing workflow., • Support both short- and long-term capacity planning initiatives; recommend adjustments based on demand fluctuations and production capabilities., • Cross-Functional Collaboration, • Serve as a key liaison between demand planning, production, procurement, and logistics teams., • Communicate supply or production constraints to internal stakeholders and escalate as needed., • Coordinate with procurement to ensure timely availability of materials and components to support production plans., • Reporting & Data Analysis, • Monitor and report key performance metrics related to production scheduling, inventory management, and forecast accuracy., • Perform data-driven analyses to identify trends, inefficiencies, and areas for improvement in production control processes., • Conduct "what-if" scenario modeling to assess the impact of changes in supply, demand, or capacity., • Risk Management & Problem Resolution, • Proactively identify risks within the production and supply planning processes., • Collaborate across departments to develop and implement effective contingency plans., • Troubleshoot and resolve issues related to production delays, material shortages, supplier disruptions, or logistics constraints. The duties, responsibilities and expectations described above are not a comprehensive list and additional tasks may be assigned to the member, within the scope of the position. • High school diploma, GED, or international equivalent required., • Minimum of 4 years of experience in production planning, supply chain management, or inventory control in a manufacturing environment., • Proficient with ERP systems and advanced Microsoft Excel skills., • Solid understanding of MRP, demand planning, inventory management, and production scheduling., • APICS/ASCM certification (e.g., CPIM, CSCP) preferred., • Strong analytical, organizational, and problem-solving skills., • Excellent verbal and written communication abilities; comfortable working across teams and departments., • Ability to prioritize and manage multiple tasks in a fast-paced environment., • Familiarity with Lean and Six Sigma practices is advantageous., • Results-driven, detail-oriented, and proactive. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and hear. The employee frequently is required to stand, walk, sit and use hands to operate a computer keyboard. The employee is occasionally required to reach with hands and arms. The employee must occasionally lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, and ability to adjust focus. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Additional Requirements/Skills: • Comply, understand, and support corporate safety initiatives to ensure a safe work environment., • Excellent interpersonal, oral & written communication skills., • Accuracy, analytical skills and attention to detail are required., • Team player, cooperative, fast-learner., • Strong multitasking skills, proactive self-starter., • Organized and focused., • Ability and willingness to abide by Company's Code of Conduct. Disclaimer: The listed qualifications and requirements for each position are intended as guidelines. Mini-Circuits reserves the right to hire outside of these guidelines at Management's discretion. Mini-Circuits is an Equal Opportunity Employer and does not discriminate on the basis of actual or perceived age, race, creed, color, national origin, sexual orientation, military status, sex, disability, predisposing genetic characteristics, marital status, familial status, gender identity, gender dysphoria, pregnancy-related condition, and domestic violence victim status or protected class characteristic, or any other protected characteristic as established by federal or state law.