Industrial safety jobs in Paterson, New JerseyCreate job alerts

Overview: Company Overview MasTec Industrial, along with sister companies Casey Industrial and Phoenix Industrial, has served the power industry since 1947. We support utilities, developers, and municipalities with EPC services and project development expertise. Ranked by ENR as the #1 Power Contractor, we specialize in natural gas, oil, biomass, and waste-to-energy projects. Our team brings over 30 years of experience in utility and industrial systems, including simple and combined cycle plants and reciprocating engines. We’re committed to delivering quality, safety, and value at every project phase, from concept to operations. At MasTec Industrial, we invest in top talent and foster a respectful, inclusive environment where employees thrive as innovative leaders. The MasTec Industrial operating group is part of the MasTec Clean Energy & Infrastructure (CE&I) business segment. The CE&I segment generates over $4.5 billion in annual revenue, providing construction services across our renewables, industrial, infrastructure, and general building operating groups. Sustainability and safety are foundational to our culture and influence everything we do. MasTec, a minority-owned Fortune 500 company, has shaped the construction industry for more than 90 years. With over 35,000 employees and 400 offices nationwide, we provide flexibility and career growth in dynamic work environments. POSITION SUMMARY: Responsible for laying out, fabricating, assembling, installing and maintaining piping and piping systems, fixtures and equipment for steam, hot water, heating, cooling, lubricating, sprinkling and industrial processing systems. $3/HOUR COMPLETION BONUS FOR PIPE CREW Eligibility for completion bonus: Effective April 27, 2026, eligible hourly employees will receive an additional $3.00 for each hour worked. Hours eligible for this bonus exclude holiday pay, paid time off (PTO), and any leave of absence. Employees must be actively employed and in good standing at the time of payout to receive the bonus. Forfeiture of Eligibility: Employees who voluntarily resign or are terminated for cause prior to payout will forfeit all accrued bonus amounts. Responsibilities: ESSENTIAL JOB FUNCTIONS: • Promote and comply with all Company and safety policies and procedures, • Select type and size of pipe and related materials according to job specifications, • Inspect worksite to determine presence of obstructions and to determine that holes will not cause structural weakness, • Plan sequence of installation to avoid obstructions and activities of other construction workers, • Cut pipe using hacksaw, pipe cutters, hammer and chisel, cutting torch and pipe cutting machine, • Thread pipe using threading machine, • Bend pipe by hand or with pipe-bending machine, • Assemble and install a variety of metal and nonmetal pipe and pipe fittings, including: brass, copper, lead, glass and plastic, • Join pipe by means of threaded, caulked, wiped, soldered, brazed, fused or cemented joints, • Use hand tools to secure pipe to structure with clamps, brackets and hangers, • Install and maintain refrigeration and air-conditioning systems, including: compressors, pumps, meters, pneumatic and hydraulic controls and piping, • Test piping system for leaks by increasing pressure in pipes and observing gauges attached to pipes for indication of leaks, • Weld holding fixtures to structural steel members, • May be required to travel to different jobsites on limited notice, • Other duties as assigned by Foreman or Superintendent Qualifications: EDUCATION AND WORK EXPERIENCE REQUIREMENTS: • 4+ years related experience and/or training or equivalent combination of education and experience, • High school diploma or GED Certification (preferred), • Applicable Pipefitter training and certificate from NCCER, NCCCO, or from approved 3rd party certification body (preferred) KNOWLEDGE, SKILLS, AND ABILITIES REQUIRED: • Be knowledgeable of MIC Health and Safety programs and project specific regulations., • When on-site, actively participate in daily toolbox meetings with crews and subcontractors., • Set a personal example of safe behavior., • Read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals, • Add and subtract two-digit numbers, multiply and divide with 10's and 100's and ability to perform these operations using units weight measurement and volume, • Common sense understanding to carry out instructions furnished in written or oral form, • Ability to work within precise standards of accuracy and follow set procedures and standards, • Other may duties may be assigned, • Maintain in-depth relations with all members of their team and your supervisor. PHYSICAL DEMANDS: • Work up to a 12-hour shift doing hard physical work in varying temperatures and outside conditions., • May need to maintain physical strength and stamina; Use arms, hands, and legs fully; Push, pull, and frequently lift and carry objects weighing up to 50 pounds; and stoop, kneel, balance, crouch, crawl, and climb to perform job tasks., • Stamina to perform this task repetitively and continuously for several hour intervals., • Uncontrolled environmental conditions: Constant change in weather and site conditions., • This work environment may involve moderate exposure to unusual elements, such as extreme temperatures, dirt, dust, fumes, smoke, unpleasant odors and/or loud noises., • Ability to wear personal protective equipment is required (including but not limited to- safety toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.)., • Move in and around confined, cluttered, and uneven areas., • May need to work at heights and must be able to abide by all safety and fall-protection requirements; must be able to wear and utilize all safety equipment required for work at heights., • Evaluate information based on measurable standards; and see details in objects or drawings and recognize slight differences in shapes and shadings., • Visualize objects in three dimensions from drawings., • Keep good balance and work at heights., • See well (either naturally or with correction)., • Hear well (either naturally or with correction.), • Coordinate the use of eyes, hands, and feet. HOURS: This position is a Full-Time position scheduled to work typically 50 hours per week. Schedule is subject to projects requirements. TRAVEL: Travel required up to 90%. Position requires presence directly on the Project Site location with intermittent travel to residence of record. What's in it for you: Financial Wellbeing • Compensation $37/ hour, commensurate with experience, • Competitive pay with ongoing performance review and merit increase, • 401(k) with company match & Employee Stock Purchase Plan (ESPP), • Flexible spending account (Healthcare & Dependent care) Health & Wellness • Medical, Dental, and Vision insurance (plan choice) - coverage for spouse, domestic partner, and children, • Diabetes Management, Telehealth Coverage, Prescription Drug Plan, Pet Insurance, • Employee Assistance Program Planning for the Unexpected • Short and long-term disability, life insurance, and accidental death & dismemberment, • Voluntary life insurance, accident, critical illness, hospital indemnity coverage, • Emergency Travel Assistance Program, • Group legal plan Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need accommodation as part of the employment process, contact ceicareers@mastec.com. Due to the high volume of applications received, we are unable to respond to individual requests regarding application status. Please log into your candidate profile for up-to-date information. MasTec, Inc. is an Equal Employment Opportunity Employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions. MasTec Clean Energy & Infrastructure and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. Appcast (For Export): #appflash

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: The Maintenance Technician Level B performs independent diagnostics, repairs, and preventive maintenance on MRF processing equipment while mentoring Level C technicians and supporting safe, reliable operations. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Diagnose and repair mechanical, hydraulic, pneumatic, and basic electrical issues., • Perform PM inspections and corrective maintenance to standard., • Document work accurately in the CMMS., • Support outages, vendor work, and equipment installations., • Follow all safety, LOTO, and PPE requirements., • Mentor Level C technicians and reinforce safe work practices. Requirements and Qualifications::, • High school diploma or GED required., • 3–5+ years of hands-on maintenance experience., • Proficiency with mechanical systems and PM execution., • Ability to read service manuals and schematics. Preferred: • Experience in industrial maintenance, manufacturing, processing, recycling, municipal utilities, or material-handling systems., • Welding and fabrication skills., • OEM or technical training exposure. Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $29.00/Hr. Salary Range Maximum: USD $32.00/Hr.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: The Maintenance Technician Level A is the senior technical expert responsible for advanced diagnostics, complex repairs, and technical leadership across all MRF processing equipment. This role sets the standard for safety, workmanship, and reliability while mentoring lower-level technicians. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: Advanced Diagnostics & Repair • Lead diagnosis and repair of complex mechanical, hydraulic, pneumatic, and limited electrical issues., • Perform major component rebuilds, overhauls, and precision alignment on critical processing equipment, • Troubleshoot chronic failures and support root-cause analysis efforts. Technical Leadership & Mentorship • Serve as the technical lead on shift and mentor Level B and C mechanics., • Verify quality of repairs, PM execution, and documentation., • Support OEM installations, upgrades, and contractor work. Preventive Maintenance & Reliability • Execute and refine PM tasks; recommend changes to intervals and procedures., • Identify and eliminate repeat failures impacting uptime and throughput. Administrative & Leadership Duties (as assigned) • Help plan daily plant maintenance workload and allocate jobs according to technician skill level., • Assist in specifying parts, evaluating repair options, and supporting warranty recovery efforts., • Support audits, safety inspections, and external regulatory reviews as the technical representative for the plant. Requirements and Qualifications::, • High school diploma or GED required., • 5+ years of industrial, fleet, or processing maintenance experience with demonstrated mastery of mechanical systems., • Strong welding and fabrication capability., • Proven ability to work independently and lead complex repairs. Preferred: • Experience as a senior technician or millwright in recycling, industrial maintenance, manufacturing, processing, aggregate, or material-handling environments., • OEM training on balers, conveyors, or processing systems., • Leadership or lead-technician experience. Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $32.00/Hr. Salary Range Maximum: USD $35.00/Hr.

Overview: Fuel Your Career with Us! Are you a skilled Diesel Mechanic looking for your next opportunity? Join our team at Interstate Waste Services and put your expertise to work! Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. Schedule: Overnight Wednesday to Sunday 6pm to 5am. Essential Job Summary:: Our Diesel Mechanics perform inspection, diagnosis and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Performs preventive maintenance inspection (PMI); troubleshoots, repairs, and rebuilds major components on vehicles and equipment. Ensures accurate diagnosis and effective repair and/or replacement of component. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Performs all work in accordance with established safety procedures., • Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting parts usage, and accounting for repair times., • Assists in the repair and adjustment of equipment., • Washes vehicles and equipment., • Conducts safety checks on vehicles., • Assists with service calls for breakdowns., • Perform other maintenance related work as required., • Maintain a clean, safe work area in compliance with Corporate / OSHA Standards. Requirements and Qualifications:: • 2+ years’ experience working as a heavy-duty Diesel Mechanic, • Hydraulics experience is highly preferred, • Engine and transmission maintenance and repairs, • Experience with diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, Peterbilt, and Paccar., • Chassis component repairs and maintenance including air brakes system, suspension, drivetrain and steering components., • Maintain and repair exhaust systems equipped with DPF systems., • Maintain a clean, safe work area in compliance with Corporate / OSHA Standards., • Assists with service calls for breakdowns, • Must be able to provide own tools., • A valid driver’s license is required.Preform other duties as assigned. Additional Information: IWS is committed to providing a world class workplace to all employees. Each eligible employee receives a competitive total compensation package including, hourly pay based on experience and paid overtime, Medical, Dental, Vision, Life Insurance and more. Our employees also receive Paid Vacation, Holidays, and Personal Days. We believe in providing the training and development you need to grow your career with IWS. Many of our Supervisors, Managers, and other leadership staff, started their careers as Helpers, Drivers, or Dispatchers. IWS is proud to be an equal opportunity employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. Salary Range Minimum: USD $24.41/Hr. Salary Range Maximum: USD $50.00/Hr.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio! IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: Our Yellow Iron Diesel Mechanics perform inspection, diagnosis, preventative maintenance, and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, primarily including yellow iron machinery, diesel heavy trucks and engines. The Technician or Mechanic is not only responsible for understanding maintenance and breakdown needs and initiating/ assigning necessary repairs, but also must be able to operate the machinery being repaired. At times, the Technician may be on call and required to assist with emergency breakdowns. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Maintains advanced knowledge to diagnose and repair mechanical problems on heavy equipment (heavy equipment includes but not limited to: yellow iron machinery, tractor trailers, forklifts, and other diesel trucks), • Performs repairs and assigned preventative maintenance services., • Estimates time and material cost on vehicle repairs and requisition of new parts., • Conduct safety checks on vehicles., • Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting part usage, and accounting for repair time., • Reviews, completes, or assigns repairs identified on Driver Vehicle Inspection Reports., • Maintain a clean, safe work area in compliance with Company safety protocols and OSHA standards., • This position will have no direct reports, however they will work in collaboration with the other yellow iron diesel mechanic on staff, although on different shifts., • Assists Sr. Technicians in the completion of project work. Work Environment • Potentially hazardous work environment with many moving parts and machinery; must be alert of surroundings at all times., • Only during breakdowns will this position be required to enter transfer station loading/ dumping area., • The Yellow Iron Diesel Technician/Mechanic may be required to lift up to 50 pounds. Frequent squatting and standing is required. Requirements and Qualifications:: Requirements • Applicants must be at least 18 years of age and legally eligible to work in the United States., • A valid driver’s license is required. CDL a plus., • At least 5 years of experience in job duties., • Sanitation or construction industry experience a plus., • Computer diagnostic experience as diesel technician a plus., • Experience with troubleshooting/repairing DPF systems diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, CAT, Peterbilt, and Paccar., • Working knowledge of applicable DOT and OSHA standards and regulations., • Must be able to speak and read English well enough to converse with colleagues, drivers and dispatch, and be able to make legible entries on reports and records., • Must be able to meet the physical and safety requirements of the position., • Must be able to provide own tools Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $30.00/Hr. Salary Range Maximum: USD $38.00/Hr.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio! IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: Our Diesel Mechanics perform inspection, diagnosis and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Performs preventive maintenance inspection (PMI); troubleshoots, repairs, and rebuilds major components on vehicles and equipment. Ensures accurate diagnosis and effective repair and/or replacement of components. Additional responsibilities include: Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Performs all work in accordance with established safety procedures., • Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting parts usage, and accounting for repair times., • Assists in the repair and adjustment of equipment., • Washes vehicles and equipment., • Conducts safety checks on vehicles., • Assists with service calls for breakdowns., • Perform other maintenance related work as required., • Maintain a clean, safe work area in compliance with Corporate / OSHA Standards. Requirements and Qualifications::, • 3-5+ years’ experience as class A or B mechanic, • Computer diagnostic experience is required, • Prior experience from waste management industry or heavy equipment/yellow iron dealership experience is a plus, • Trade school or similar training is a plus, • Knowledge of safety procedures and practices Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $27.00/Hr. Salary Range Maximum: USD $32.64/Hr.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial, and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling, and environmental services, while keeping focus on employee, customer, and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: The On-Road Technician / Installer is a mobile field service role responsible for installing, maintaining, and repairing compactors, containers, and related waste handling equipment at customer sites. This role involves working independently in the field, managing installations, troubleshooting issues, interfacing with customers, and ensuring safe, efficient setup and operation of equipment. This position requires mechanical, hydraulic, and light electrical knowledge, with a strong emphasis on safety, organization, and professionalism. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Perform on-site installations of stationary and self-contained compactors, including leveling, mounting, and basic wiring or hydraulic connections., • Conduct preventive maintenance and service calls to inspect, troubleshoot, and repair compactors and other waste handling systems., • Interface with customers and facility personnel to confirm placement, functionality, and safety of installed equipment., • Coordinate with dispatch and shop teams for equipment delivery, site access, and post-install follow-up., • Test all components post-installation to ensure functionality and safety compliance., • Diagnose mechanical, hydraulic, and electrical issues in the field using manuals, diagnostic tools, and checklists., • Document work performed, parts used, and any customer concerns using service tickets or mobile forms., • Ensure proper use and maintenance of company truck, tools, and inventory., • Follow all safety protocols when working at industrial, retail, or construction sites., • Represent the company professionally, maintaining good communication and clean work practices at customer locations. Work Environment: This is a field-based position with frequent travel to customer sites. Technicians may be exposed to outdoor weather, confined spaces, heavy lifting, and noisy environments. PPE, including steel-toe boots, gloves, and eye protection, must be worn during all work. Requirements and Qualifications:: • 2+ years of experience in field service, mechanical installation, or compactor repair (preferred)., • Working knowledge of hydraulic systems, basic electrical components, and power tools., • Ability to read and interpret wiring diagrams, work orders, and technical manuals., • Valid driver’s license and clean driving record required., • Able to work independently, manage time effectively, and communicate clearly with customers., • Physically capable of lifting heavy parts, climbing ladders, and working in outdoor conditions., • Strong problem-solving skills and customer-focused mindset., • DOT certification, forklift experience, or welding background is a plus. Additional Information: IWS is committed to providing a world class workplace to all employees. Each eligible employee receives a competitive total compensation package including, competitive pay, Medical, Dental, Vision, Life Insurance and more. Our employees also receive Paid Time Off and Holidays. All Compactor Technicians are members of a Union, and benefits will be provided as outlined in the collective bargaining agreement. This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $32.00/Hr. Salary Range Maximum: USD $48.00/Hr.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio! IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: The Training Manager – Fleet Maintenance & Technical Development leads the design, implementation, and continuous improvement of Interstate Waste Services’ company-wide maintenance and operations training programs. This role ensures alignment with IWS’s World Class Maintenance standards, safety culture, and operational excellence goals. The manager oversees technical training for refuse trucks, tractors and trailers, heavy equipment, and support assets, fostering technician skill development, compliance, and performance improvement. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Develop, implement, and manage a comprehensive technical training curriculum for all maintenance positions across asset classes., • Establish and maintain competency matrices, certification programs, and technician development paths., • Coordinate OEM and vendor-based training programs with partners such as Mack, Peterbilt, Battle Motors, Heil, McNeilus, CAT, Volvo, etc., • Integrate LMS and TMT Fleet Maintenance data to track training effectiveness on KPIs such as PM compliance, breakdown percentage, and labor efficiency., • Conduct shop audits and skill assessments to validate training adoption and identify development needs., • Collaborate with Safety and Compliance to ensure all technical training includes OSHA, DOT, and environmental compliance components., • Lead the development of leadership training for Maintenance Managers and Directors focusing on coaching, team building, and KPI management., • Develop and utilize reports and dashboards to communicate training metrics and improvements to executive leadership., • Support acquisitions and new shop integrations with rapid training and onboarding programs., • Serve as liaison between Corporate Maintenance, Safety, HR, and field operations to ensure consistency in training delivery and compliance. Requirements and Qualifications:: Education and Experience • Required: High School Diploma with 7+ years of progressive maintenance or training experience., • Preferred: Bachelor’s Degree in a related field with 5+ years of leadership experience in fleet or technical training. Certificates, Licenses, Registrations • ASE or OEM certifications preferred but not required Other Knowledge, Skills, or Abilities Required • Proficiency in Microsoft Office Suite and Learning Management Systems (LMS)., • Ability to analyze data from TMT or comparable fleet software to measure training effectiveness., • Strong communication and presentation skills., • Knowledge of safety regulations, OSHA, and DOT standards., • Self-starter with organizational and follow-through abilities. Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $100,000.00/Yr. Salary Range Maximum: USD $140,000.00/Yr.

Job Description Staff Management Group is seeking a Pit Operator for our client in Carlstadt, NJ. Please read the ENTIRE job description and ALL of the job requirements BEFORE applying for this position. Schedule: • 1st Shift: 7AM - 3:30PM OR 8AM - 4PM, • Plus Overtime Pay Rate: • $19 / hour Job Summary: We’re hiring a Pit Operator to operate industrial trucks & stand-up and sit-down forklifts to load and unload trailers to then distribute and store materials. Job Responsibilities: • Move materials to and from production lines, loading docks, trailers, and designated storage areas, • Review daily work orders, production schedules, and shipping requests to complete tasks accurately, • Understand load capacities and equipment limits to ensure safe and efficient material movement, • Secure loads, wrap pallets, and prepare materials for safe transportation within the facility, • Inspect materials during handling and report discrepancies, damages, or equipment concerns immediately, • Operate forklifts and PIT equipment in full compliance with safety procedures and training standards, • Perform basic checks and minor servicing on PIT equipment; notify supervisors of required maintenance, • Update logs, inventory systems, and scanner entries to maintain accurate material tracking, • Maintain a clean, organized, and hazard-free work environment at all times, • Support additional warehouse tasks and operational needs as assigned. Job Requirements: • MUST be bilingual - English AND Spanish., • Valid forklift certification with a minimum of 3 years of PIT/forklift experience, • Capable of lifting up to 40 lbs and safely operating warehouse equipment, • Comfortable using handheld scanners and basic computer systems, • Strong multitasking ability, high attention to detail, and dependable work ethic, • Able to work independently and collaboratively in a fast-paced warehouse Additional Information: Staff Management Group is an equal employment opportunity employer, and all qualified applicants will receive consideration for employment without unlawful discrimination based on race, color, creed, national origin, sex, age, disability, marital status, sexual orientation, or citizenship status. About Staff Management Group: Staff Management Group has over 30 years of experience placing staffing candidates in distribution, manufacturing, production, assembly, and clerical positions. Staff Management Group is one of New Jersey’s leading staffing and recruiting agencies specializing in light industrial and clerical staffing. Come join the team! #IND1

Job Description Do you have the need for speed? Do you thrive in a fast paced, energetic work environment that focuses on serving our customers? If so, K1 Speed is the place for you. As the nation’s indoor electric karting leader and innovator for over the past decade, K1 Speed does not compromise on the quality and value of the product we offer. Through our industrial go-karts and excellent staff, our passion is to show the world how fun karting can actually be. As a Track Operator, you will be at the core of the day to day operations, leading and guiding our customers to a fun, safe karting experience. Is this you? Duties and Responsibilities: • Provide excellent customer service to all K1 Speed visitors, • Run races precisely, on time and safely, • Maintain track cleanliness at all times, • lifting required, • Standing for long periods of time, • Enthusiastically brief guests on safety rules before entering the track, • Assist guests with needed safety equipment, • Control races in a safe manner to maximize the FUN for guests, • Efficiently load, unload, and charge karts Job Requirements: • Must be at least 18 years of age, • Provide proof of identity and eligibility to work in the United States, • Must have reliable transportation, • Weekends are a must!, • Must be able to read, write and speak English, • Must be able to communicate effectively in front of large groups, • Must be able to adhere to all company policies and procedures, • Must be willing and able to drive the karts daily, • Must be able to remain calm under stressful situations and effectively respond to safety concerns. **By applying to this position, you agree that you can preform the duties listed above.

Job DescriptionCompany Description With more than 100 years of experience, Sika is a worldwide innovation and sustainability leader in the development and production of systems and products for commercial and residential construction, as well as the transportation, marine, automotive, and renewable energy manufacturing industries. Sika is a specialty chemical company with a globally leading position in the development and production of systems and products for bonding, sealing, damping, reinforcing, and protection in the building sector and industry. Sika has subsidiaries in 103 countries around the world, produces in over 400 factories, and develops innovative technologies for customers worldwide. In doing so, it plays a crucial role in enabling the transformation of the construction and transportation industries toward greater environmental compatibility. Approximately 33,000 employees generated CHF11.20 billion in sales in 2025. Job Description Responsible for the operation of a manufacturing and/or packaging line(s), to ensure maximum production quantity and quality, while supporting the policies, goals, and objectives of the company for an 8 or 12-hour shift. This position reports to directly to Shift Supervisor. • Tends manual or semiautomatic systems that process chemical substances into industrial or consumer products, such as sealants, adhesives, primers, and intermediates., • Loads specified amounts of solid and liquid materials into heating/cooling vessels or blending tanks. Turns valves to feed liquid and solid materials through equipment units, or sets controls in specified sequence on control panel to start automatic feed., • Observes chemical reactions; monitors gauges, signals, and recorders; and receives notification from quality control laboratory, supervisor, or other workers to make specified operating adjustments., • Draws samples of products for quality control analysis., • With the use of a forklift, packages, palletizes, shrink-wraps and stages Sika product into a staging area or directly onto a truck for transportation to external warehouses., • Performs other duties of a similar or related level and assists with special projects as necessary or assigned., • Responsible for conformance with all safety rules to maintain plant safety., • Maintain good housekeeping, and performs minor maintenance of equipment, workstations and manufacturing areas. Salary range: $19.40 to $20.10 per hour Qualifications • High School graduate, trade school certification in electronics or related field a plus., • Able to read, write and comprehend documents in English., • Able to lift up to 74 lbs repeatedly throughout work shift., • Able to understand, analyze and resolve technical problems in work area., • Able to work shift schedule where opening exists., • Must be able to operate a forklift., • Pass a Sika proficiency test which will test both reading comprehension and math ability. Additional Information All your information will be kept confidential according to EEO guidelines. Sika Corporation is committed to a work environment that supports, inspires, and respects all individuals that apply. As an equal opportunity employer Sika will consider all qualified applicants without discrimination on the basis of race, color, religion, sex, pregnancy, sexual orientation, gender identity, age, disability, national or ethnic origin, or other protected characteristics. We offer competitive salaries, aligned with local market benchmarks and the specific scope and responsibilities of each role. Compensation is determined based skills relevant to the position, education and/or training. We are committed to fair and equitable pay practices in accordance with applicable laws and regulations.

Description: The Machine Builder is responsible for constructing and assembling machinery to meet production standards and operational needs. This role is essential for ensuring that machines are accurately built, function efficiently, and comply with safety guidelines, supporting the overall productivity and success of the company. Assembly and Installation: Assemble and install mechanical, electrical, and pneumatic assembly components according to blueprints and technical drawings. Blueprint Reading: Accurately interpret blueprints and schematics to ensure precise assembly. Troubleshooting: Identify and resolve mechanical issues during the assembly and installation process. Collaboration: Work with engineering and design teams to refine machine designs and improve functionality. Maintenance and Repairs: Perform routine maintenance and necessary repairs to machinery. Documentation: Maintain detailed records of assembly processes and update technical manuals. Compliance: Ensure all work complies with safety regulations and company standards. Other duties as assigned. Requirements: Strong mechanical aptitude and experience with machine assembly. Proficient in reading and interpreting blueprints and technical drawings. Excellent problem-solving skills and attention to detail. Effective communication and teamwork abilities. Education & Experience High school diploma or equivalent required; technical degree or certification in mechanical engineering or a related field preferred. Proven experience as a Machine Builder or in a similar role. Working conditions While performing the duties of this job, the employee occasionally works near moving mechanical parts and is occasionally exposed to wet and/or humid conditions, ambient air, fumes, or airborne particles. Work may involve exposure to industrial environments. While performing the duties of this job, the employee will encounter prolonged periods of sitting at a desk, working on a computer, walking, talking, or listening; use of hands and fingers to operate a computer, telephone and others office devices and reach with hands and arms. The noise level in the work environment is usually moderate, but occasionally high requiring safety equipment to be utilized. Physical requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Candidate must be able to perform the physical responsibilities of the job utilizing arms, hands, and fingers to perform complex functions of manufacturing parts and performing other duties of the job, e.g., standing, sitting, walking through the facility and stairs, bending, squatting, and kneeling, etc. Frequently move and maneuver on ladders of varying sizes. Manual dexterity to manage tools and equipment. Ability to lift items weighing up to 50 lbs. Pay: $25.00 - $28.00/hour Benefits: Eligible after 1st day: Paid holidays Employee Assistance Program Eligible after 90-day probation period: Medical, Dental, Vision, Basic Life/AD&D Insurance, Voluntary Term Life/AD&D Insurance Health Savings Account (HSA), Flexible Spending Account (FSA), Dependent Care Account, Commuter Transportation Management Account Vacation time Sick time Eligible after 1 year of service: 401(k) with Employer Match Potential for discretionary bonus The final pay offered to a successful candidate will be dependent on several factors that may include but are not limited to the type and years of experience within the job, the type of years and experience within the industry, education, etc. We’re proud to be an equal opportunity employer. This means we actively pursue ways to celebrate our differences and don’t discriminate based on an individual’s race (including traits historically associated with race, such as hair texture, hair type, and protective hairstyles including braids, locks, and twists), creed, national origin, nationality, religion, ancestry, age (40 or over), sex (including pregnancy), familial status, marital status, civil union or domestic partnership status, affectional or sexual orientation, gender identity or expression, mental or physical disability (including perceived disability, AIDS, and HIV status), atypical hereditary cellular or blood trait, genetic information, because of liability for service in military, status as a smoker or non-smoker, status as a registered medical marijuana user, or any unlawful criterion existing under applicable federal, state, or local laws. If you need assistance or an accommodation due to a disability, contact us at HR@Bairdindustries.com. PI284761197

Looking for a place where you can thrive? The General Tree Care Team are the muscle of our operation. These industrial athletes work together to provide high-quality tree care, helping to maintain and preserve the overall health of our clients’ landscapes. In this role, as a Tree Climber you will have the opportunity to work outside and visit beautiful properties in their community. The Tree Climber applies expertise in climbing, pruning, and safety to ensure the health and well-being of each client’s landscape. What a day is like: Daily focus is working together on a General Tree Care crew to provide high quality tree care to our clients. The Tree Care Team is involved in all aspects of pruning, removals, cable bracing and other concepts related to tree care. Team members are able to safely operate all equipment and perform the assigned job tasks while also providing excellent service to our clients. What kind of person are we looking for? Someone with: • Experience with proper pruning practices including large shade trees and ornamentals, • Ability to identify native and introduced tree and shrub species and have a working knowledge of each species’ characteristics, • Ability to climb without spurs, • Experience with tree care safety standards, • Practical knowledge of chainsaw and equipment operation, • Experience with aerial lifts (bucket truck), • Communicate advanced understanding of all safety policies and procedures, including hazard tree identification., • Utilize specialized equipment properly for climbing (ropes, saddle, ladders) along with all associated tools., • Apply knowledge of branch collars, and proper pruning cuts with total competence on chainsaw operations. What is Essential: • 6 months – 1-year minimum Tree Climbing Experience, • The desire to work outdoors, • Valid U.S. driver's license to operate company vehicles, CDL A&B a plus or willingness to obtain, • Must be authorized to work lawfully in the U.S. Why you might love working here: • We have lots of training and development opportunities and support continuing education in the industry, • Our Tree Care Team works alongside some of the best trained and equipped teams in the industry, with an emphasis on quality and safety, • We offer competitive compensation and benefits, including health and dental, paid time off, 401(K) Savings Plan, Flexible Spending Plan, Equipment Account Physical demands of this role: These physical demands described must be met by an employee to successfully perform the essential functions of this job. While performing the duties of the job, the employee is subject to lift and/or move up to fifty (50) pounds. We want everyone to be able to identify and achieve their own version of success, which means giving each team member the room and opportunity to grow. To ensure that everyone has the best chance to succeed, we invest heavily in training and continuing education. We make it easy for team members to reach out and get the help needed, even when it’s from the other side of the country. We pride ourselves on creating an environment where each team member has the resources and opportunities to advance his or her career and become a go-to subject matter expert. That’s why we often say that when you work here, you thrive here. This position pays up to $45/hr depending on experience + paid PTO + paid benefits, 401K. SavATree is an equal opportunity employer and a Drug Free Workplace

Be part of the future! We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference. What you will do Receive service calls from Service Resource Center, including a brief description of equipment/system malfunctions. Contact customer representative and ascertain equipment/systems problems. Perform service and repairs on sprinkler systems for commercial, industrial, and residential applications. These include but are not limited to wet (steel, copper and CPVC), dry, pre-action, deluge, and fire pumps. Follow prescribed troubleshooting procedures and refer to technical manuals, part manuals, change notices and bulletins, modification notices, etc., to diagnose and repair equipment. Read and interpret blueprints, diagrams, submittals, specifications software/systems, programs, schematics, and operational product manuals. Exhibit effective customer service skills by consistently communicating with the district staff and customers to ensure complete customer satisfaction. Electronically complete Service Acknowledgements with proper coding and obtain customer’s signature. Participate in a scheduled On-call rotation. Perform other duties as assigned. What we look for Must be an active member of the Local 696. 2+ years of documented experience in Fire Sprinkler/Suppression industry Experience in reading and interpreting blueprints, submittals, and operational/product manuals High School Diploma or equivalent required Must be willing to travel. Ability to follow verbal and written instructions Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs. Able to work in unusual and sometimes difficult position such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc. Ability to work flexible hours including weekends to meet customer requirements Able to participate in an on-call rotation schedule Overnight travel will be required Demonstrate a high level of customer service Maintain truck inventory to ensure timely response to customer needs Ability to adhere to, implement, and always follow safety guidelines and procedures. Strong organizational skills, positive attitude, and an ability to learn quickly Possess a valid driver’s license and driving record that meets company requirements Able to pass a pre-employment background and drug test Must possess and retain current State Fire Protection License or Journeyman License valid Preferred NICET Level II Pay Range: $74.77 hourly rate determined by the CBA/rate sheet. Benefits are provided through a local labor union aligned with a collective bargaining agreement. The posted salary range reflects the target compensation for this role. However, we recognize that exceptional candidates may bring unique skills and experiences that exceed the typical profile. If you believe your background warrants consideration beyond the stated range, we encourage you to apply. To support an efficient and fair hiring process, we may use technology assisted tools, including artificial intelligence (AI), to help identify and evaluate candidates. All hiring decisions are ultimately made by human reviewers.

Job DescriptionAbout the Client Our client is a well-established food manufacturing company, known for producing high-quality baked goods in a fast-paced production environment. The organization focuses on efficiency, safety, and product integrity, supporting daily operations through strong warehouse and distribution processes. Role Overview: The Lumper supports daily freezer warehouse operations within a fast-paced industrial bakery environment. This role is responsible for loading, unloading, moving, and organizing frozen bakery products while maintaining safety, productivity, and inventory accuracy throughout the shift. This is a hands-on position working in a freezer environment and requires candidates who are comfortable performing physical warehouse duties in cold temperatures for extended periods. The position follows a 3rd-shift schedule (Overnight / 11:00 pm – 7:30 am) and may require availability for overtime, weekends, and holidays based on operational needs. Job Requirements: • Prior experience in warehouse, lumper, or distribution operations preferred., • Experience operating manual and/or electric pallet jacks preferred., • Comfortable working in a freezer environment for extended periods., • Ability to lift and move 50–75 lbs repeatedly throughout the shift., • Strong attention to detail and commitment to workplace safety., • Ability to work independently and within a team environment., • Availability to work 3rd shift, overtime, weekends, and holidays as required., • Must pass a pre-employment background check and drug screening., • Steel-toed boots required on day one.Physical Requirements:, • Ability to work for extended periods in temperatures ranging from 0F to 32F., • Frequent lifting, bending, carrying, pushing, and pulling throughout the shift., • Comfortable working in cold storage and fast-paced warehouse environments.Key Responsibilities:, • Unload inbound shipments: Handle frozen bakery products arriving from trailers and delivery vehicles., • Load outbound freight: Prepare pallets and shipments for daily distribution operations., • Operate pallet jacks: Move products safely throughout freezer and warehouse areas., • Organize inventory: Stack, sort, and store frozen goods within designated storage locations., • Support inventory accuracy: Verify product counts and assist with inventory checks as needed., • Maintain safety standards: Follow GMP, OSHA, and workplace safety procedures at all times., • Maintain work areas: Keep freezer and warehouse areas clean and organized., • Report operational issues: Notify supervisors of product damage, discrepancies, or safety concerns., • Collaborate with teams: Work closely with warehouse, shipping, and production staff to support daily operations., • Perform other job-related duties as assigned. GRIT Staffing & HR Solutions is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees and applicants. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. If you require a reasonable accommodation during the application or interview process, please contact us at eoc@gritstaffinghr.com so we can assist you.

Job Description Staff Management Group is seeking a Forklift Operator for our client in Moonachie, NJ. Please read the ENTIRE job description and ALL of the job requirements BEFORE applying for this position. Schedule: • 1st Shift: 8AM - 5PM, • Monday - Friday, • Plus overtime Pay Rate: • $20 / hour Job Summary: We’re seeking a motivated and experienced Production Leader to join our Outbound Department at our Linden, NJ facility. The Production Leader is responsible for supervising daily outbound operations, guiding warehouse associates, and ensuring that all outgoing orders are processed accurately and efficiently during the 1st shift. This role requires strong leadership, excellent communication skills, and hands-on warehouse experience. The ideal candidate will lead by example, maintain safety and productivity standards, and support a positive team culture. Job Responsibilities: • Load and unload trucks, incoming sea containers, loading sea containers, prepare air shipments,packages, LCL, and LTL via forklift and sometimes by hand (rarely), • Participate in cross-training program to develop skills in all areas of warehouse operations., • Utilize bar coding to properly label, put away, track, pick, and pack inventory. Prepare warehousereceipts by taking dims and weight of incoming cargo and photos., • Put away incoming freight, prepare and verify loading guides as dictated by operational need, • Participate and assist with special projects, inventory movement, warehouse layout, or othermovement of goods as needed. Including determine equipment size and quantity required per shipment,as dictated by operational need, • Maintain general cleanliness of warehouse by moving recyclable and non-recyclable goods to theproper collection containers., • Participate in cycle and annual inventory counts/recounts., • Comply with all company. TSA and OSHA regulated safety codes, • Maintain cleanliness of company issued machinery and tools, • Overtime as necessary, • Additional duties as assigned by Management Job Requirements: • MUST be bilingual - English AND Spanish, • Minimum 3 years of experience, • High School Diploma or equivalent with warehousing experience or any combination of education andexperience., • Bar Coding/WMS/RF System Skills/ WMS, • Attention to Detail, • Ability to meet Company standards, • Ability to pass CRP Forklift Operation Certification OR to be forklift certified is better, • Must be able to lift up to 75 lbs., • Must be able to meet all Departments Standards, • Must be able to stand for long periods of time and be active, • Must be able to walk, kneel, bend and reach repeatedly., • Good Product & Customer Knowledge, • Be proactive Additional Information: Staff Management Group is an equal employment opportunity employer, and all qualified applicants will receive consideration for employment without unlawful discrimination based on race, color, creed, national origin, sex, age, disability, marital status, sexual orientation, or citizenship status. About Staff Management Group: Staff Management Group has over 30 years of experience placing staffing candidates in distribution, manufacturing, production, assembly, and clerical positions. Staff Management Group is one of New Jersey’s leading staffing and recruiting agencies specializing in light industrial and clerical staffing. Come join the team! #IND1

Maintenance Manager Lyndhurst, NJ, USA Company Description With more than 100 years of experience, Sika is a worldwide innovation and sustainability leader in the development and production of systems and products for commercial and residential construction, as well as the transportation, marine, automotive, and renewable energy manufacturing industries. Sika is a specialty chemical company with a globally leading position in the development and production of systems and products for bonding, sealing, damping, reinforcing, and protection in the building sector and industry. Sika has subsidiaries in 103 countries around the world, produces in over 400 factories, and develops innovative technologies for customers worldwide. In doing so, it plays a crucial role in enabling the transformation of the construction and transportation industries toward greater environmental compatibility. Approximately 33,000 employees generated CHF11.20 billion in sales in 2025. Job Description This position is responsible for planning, directing, and managing all technical resources for the Lyndhurst facility, including building, infrastructure, and equipment. The role oversees capital budget projects, maintenance operations, and supervises the Engineering and Maintenance departments. Key Responsibilities: • Develop, implement, and continuously improve a preventive maintenance system; monitor effectiveness and optimize overall equipment effectiveness (OEE), • Manage and supervise the Maintenance Department workforce, including Shift Mechanics and Instrument and Control Technicians; optimize labor and materials utilization, • Lead capital investment projects and major facility initiatives from planning through execution, ensuring alignment with project scope, timeline, and budget parameters, • Train and guide manufacturing teams to ensure proper equipment maintenance and operational capability, • Establish departmental goals and performance standards; provide professional development and coaching to technical personnel, • Develop and administer the Engineering and Maintenance departmental budget in cooperation with management, • Ensure compliance with company policies regarding safety, purchasing, regulatory requirements, and labor relations, including ISO 14000, RC9001, QS9000, and TS16949 certifications Qualifications • B.S. in Engineering (Mechanical or Electrical); advanced degree preferred, • 5+ years' experience in chemical and industrial manufacturing environments with demonstrated project management expertise, • Excellent communication and employee relations skills across all organizational levels, • Strong technical analysis and problem-solving capabilities with ability to function in fast-paced, dynamic environments, • Knowledge of regulatory requirements and industry certifications (ISO 14000, QS9000, TS16949) Additional information • 401k with Generous Company Match, • Bonuses, • Medical, Dental, and Vision Benefits, • Paid Parental Leave, • Life Insurance, • Disability Insurance, • Paid time off, paid holidays, • Floating holidays + Paid Volunteer Time, • Wellness/Fitness Reimbursements, • Education Assistance, • Professional Development Opportunities, • Employee Referral Program & More! Sika fosters a culture of entrepreneurship, empowering each individual to make decisions, learn from experiences, and shape their own career path. The safety and well-being of employees are top priorities at Sika, with a strong commitment to open communication and maintaining a safe workplace. In addition, Sika actively contributes to the community and promotes sustainability by giving back, minimizing environmental impact, and embracing social responsibility. Sika Corporation is committed to a work environment that supports, inspires, and respects all individuals that apply. As an equal opportunity employer Sika will consider all qualified applicants without discrimination on the basis of race, color, religion, sex, pregnancy, sexual orientation, gender identity, age, disability, national or ethnic origin, or other protected characteristics. We offer competitive salaries, aligned with local market benchmarks and the specific scope and responsibilities of each role. Compensation is determined based skills relevant to the position, education and/or training. We are committed to fair and equitable pay practices in accordance with applicable laws and regulations.

Hourly Rate: $ 27.50 / hour An established precision manufacturing company specializing in aerospace, defense, industrial, and commercial components is seeking a CNC Lathe Machine Operator to support machining operations in a high-quality production environment. This organization operates within a fast-paced manufacturing setting focused on precision, safety, and continuous improvement. Open to local candidates only. Located in Clifton, NJ. Prioritized Must-Have Skills for the CNC Lathe Machine Operator: #1. 2–5 years of CNC Lathe machine operation experience #2. Experience machining aluminum castings or aerospace components strongly preferred #3. Ability to read blueprints, setup sheets, and engineering drawings #4. Experience using precision measuring tools, including calipers, micrometers, bore gauges, and indicators #5. High school diploma or GED preferred; technical school or machining certification preferred Responsibilities of the CNC Lathe Machine Operator: • Set up and operate CNC lathe machines, • Machine aluminum investment castings and precision components, • Read and interpret blueprints, setup sheets, process travelers, and engineering drawings, • Load raw materials and secure fixtures properly, • Monitor machine performance and make offset adjustments, • Perform tooling changes and insert replacements, • Conduct in-process inspections and verify dimensions, • Use calipers, micrometers, bore gauges, height gauges, and indicators, • Identify and report nonconforming parts or machine issues, • Deburr and clean machined parts as needed, • Maintain production and inspection records, • Follow PPE, safety, and housekeeping requirements, • Support lean manufacturing and continuous improvement initiatives, • Collaborate with CNC Programmers, Quality, and Supervisors to improve efficiency and reduce scrap Requirements of the CNC Lathe Machine Operator: • 2–5 years of CNC Lathe machine operation experience, • Experience machining aluminum castings or aerospace components strongly preferred, • Ability to read blueprints, setup sheets, and engineering drawings, • Experience using precision measuring tools, including calipers, micrometers, bore gauges, and indicators, • High school diploma or GED preferred; technical school or machining certification preferred, • Proficiency with engineering and process simulation tools such as AutoCAD, MATLAB, or similar software, • Experience with Fanuc, Haas, Mazak, Okuma, or similar CNC controls, • CNC setup experience preferred, • Basic GD&T interpretation, • Knowledge of tool offsets, feeds, and speeds, and machining math, • Experience in AS9100 or NADCAP environments preferred, • Multi-axis CNC lathe experience preferred, • SPC experience preferred, • Aerospace or defense manufacturing experience preferred, • Required PPE includes safety glasses, hearing protection, and steel-toe footwear Technical Skills of the CNC Lathe Machine Operator: • CNC Lathe Operation, • Blueprint Reading, • GD&T Interpretation, • Precision Measurement Equipment, • Tool Offsets & Wear Compensation, • Feeds & Speeds Knowledge, • Basic Machining Math, • Cutting Tools & Inserts Knowledge Benefits of the CNC Lathe Machine Operator: • Medical Insurance, • Dental Insurance, • Retirement #Latheoperator #CNCMachinist #CNCLathemachinist #tech2026 #CNClathemachine #lathemachine

Salary: $80,000 – $120,000 Is this your perfect fit? • Are you a hands-on operations leader who thrives in a manufacturing environment—not behind a desk?, • This role is ideal for someone who enjoys solving mechanical challenges, leading from the floor, and building structure within a growing operation., • If you have a strong maintenance mindset and want to play a key role in stabilizing and scaling a facility during a major transition, this could be a great opportunity!, • This position will be located at our client's facility in Carlstadt, N.J. What your future day will look like: • Lead daily operations across production and warehouse teams, setting priorities and driving accountability, • Troubleshoot and repair mechanical equipment such as mixers, pumps, tanks, conveyors, and filling systems, • Support electrical troubleshooting (motor controls, sensors, panels) and coordinate with licensed electricians as needed, • Implement and manage the preventive maintenance program, including tracking downtime, repairs, and parts usage, • Maintain calibration schedules for instrumentation (temperature, pressure, flow, and weighing systems), • Act as the on-site lead for equipment installs, upgrades, and capital projects, • Support ongoing in-sourcing efforts by identifying facility gaps and helping implement scalable solutions, • Step in on the floor as needed—assist with batching, material handling, shipping/receiving, and forklift operation, • Enforce safety programs including LOTO, HazCom, PPE, and OSHA compliance, • Ensure quality standards are met, including batch documentation, deviation resolution, and product release readiness, • Oversee inventory accuracy, warehouse organization, and proper hazardous material handling and shipping, • Utilize ERP systems to manage batch records, inventory transactions, and reporting Benefits Offered: • Company offers a competitive package including health insurance, 401K and PTO Type: Direct Hire To be a champion in this role, you will need: • 5+ years of experience in manufacturing, industrial, or chemical operations, • 2+ years in a leadership or supervisory role, • Strong hands-on mechanical skills with the ability to personally troubleshoot and repair industrial equipment, • Working knowledge of electrical systems, including motor controls, panels, and sensor wiring, • Experience managing or executing a preventive maintenance program, • • Familiarity with OSHA standards (LOTO, HazCom, PPE) in a manufacturing environment, • Ability to lead and develop a small, cross-functional team, • Comfort working on the production floor and stepping into operational roles as needed, • Experience with inventory systems or ERP platforms (Datacor or similar preferred), • Forklift experience (or ability to obtain certification quickly) We know you are more than a resume and understand your next career move needs to be the right fit! If this is your first time considering Godshall as your trusted partner, welcome! Once you have applied, we will review your experience and skills. You will then hear back quickly with the next steps. If you have already spoken with Godshall, please reach out to your recruiter. We will happily update your file and make sure we are considering you for all roles your experience and skills are a perfect fit for. Godshall & Godshall Personnel Consultants, Inc. is an equal opportunity employer and gives consideration for employment to qualified applicants without regard to race, color, religion, sex, national origin, age, disability, sexual orientation, status as a parent or protected veteran status.

A leading environmental services and infrastructure company is looking to add a Safety Manager to support operations across New Jersey, based in the Paramus, NJ area. This role will focus on strengthening health, safety, and security practices across multiple operational sites while building a strong, proactive safety culture. This person will be tasked with providing senior-level leadership, driving compliance, and reducing risk in complex, regulated environments. It’s a strong opportunity for an experienced safety leader to influence strategy while remaining closely connected to field operations. The Role • Lead and evolve division-wide health, safety, and security programs to improve safety culture, compliance, and behavioral performance across multiple facilities., • Serve as the senior HSS authority for the New Jersey division, partnering closely with operations and leadership to assess risk, implement preventative strategies, and support ongoing and new initiatives., • Manage and mentor a safety professional while overseeing training programs, audits, inspections, and field coaching efforts., • Direct incident investigations, injury case management, and workers’ compensation activities, ensuring strong root-cause analysis and executive-level reporting., • Analyze safety data and trends to develop predictive insights, guide decision-making, and reduce incidents across diverse operational environments. The Candidate • Bachelor’s degree in Safety, Environmental Engineering, or a related discipline, with 5+ years of experience in health, safety, and security compliance., • Background in construction, industrial, utility, or similar high-risk operational environments with strong regulatory exposure., • Demonstrated ability to lead safety strategy while remaining hands-on in the field with crews and site leadership., • Strong communicator and coach, comfortable influencing at all levels of an organization and managing competing priorities., • Professional safety certifications (CSP, CHMM, OSHA instructor credentials) are preferred, along with the ability to be on-call and travel regularly within the region.

TJ Maxx At TJX Companies, every day brings new opportunities for growth, exploration, and achievement. You’ll be part of our vibrant team that embraces diversity, fosters collaboration, and prioritizes your development. Whether you’re working in our four global Home Offices, Distribution Centers or Retail Stores—TJ Maxx, Marshalls, Homegoods, Homesense, Sierra, Winners, and TK Maxx, you’ll find abundant opportunities to learn, thrive, and make an impact. Come join our TJX family—a Fortune 100 company and the world’s leading off-price retailer. Job Description: Job Summary: Responsible for the upkeep and repair of the equipment, building, and grounds. Responsibilities include electrical, HVAC, conveyor, powered industrial equipment, and life safety equipment. Coordinates with local contractors and vendors. Major Areas of Responsibility · Oversees all work and demonstrates SME (Subject Matter Expert) levels of knowledge on all MHE (Material Handling Equipment) in the building · Manage site projects as needed · Aligns priorities and workload scheduling with operational leaders to support production goals · Coordinates with local contractors / vendors for equipment services as required and ensures contract compliance · Coordinates daily maintenance, troubleshooting, and preventative maintenance of equipment. · Obtains services for repairs and maintenance of the facility’s equipment · Ensures timely and accurate completion of reports and recordkeeping requirements · Ensure all vendor work is completed, at budget, and verified prior to approval or sign-off · Understand and drives budget requirements. Key Responsibilities · Conduct routine building walks across all assigned facilities to proactively identify repair needs, deferred maintenance, and safety concerns. · Assess interior and exterior building conditions, dock equipment, HVAC systems, plumbing, electrical infrastructure, racking, life safety systems, and exterior conditions. · Prioritize repair work based on operational impact and safety risk. · Develop repair plans and escalate significant structural or capital concerns to the Facilities Manager. · Maintain a rolling log of facility deficiencies and corrective action plans. 3PL Partnership & Safety Collaboration · Serve as the primary facilities liaison to the 3PL leadership team · Partner with TJX and 3PL operations to maintain safe working conditions and ensure building and regulatory compliance · Identify, address, and resolve safety-related building issues (dock plates, lighting, trip hazards, guardrails, fire lanes, etc.) · Participate in routine safety walks and collaborate with stakeholders to implement corrective actions · Support OSHA compliance, fire/life safety standards, and applicable local codes · Promote a culture of shared ownership and accountability for building safety, upkeep, and overall appearance Describe the kinds of decisions made by the incumbent Responsible for the upkeep and repair of the equipment, building and grounds. Responsibilities specifically include electrical, HVAC, conveyor, powered industrial equipment, life safety equipment. Coordinates with local contractors and vendors. Minimum formal education, if there is any, required to perform this job · High School Degree or equivalent plus 3 - 5 years of conveyor systems and powered equipment experience. Minimum job skills required to perform this job · Strong knowledge of building codes, trade standards and general practices within the maintenance field. · Strong knowledge of electricity, mechanical, construction, plumbing and HVAC. · Strong communication, organizational, and negotiation skills. · Experience overseeing operations across multiple buildings preferred. · Strong working knowledge of building systems and warehouse infrastructure. · Demonstrated experience partnering with 3PL providers and operational leadership teams preferred. · Working knowledge of OSHA regulations and fire/life safety compliance standards. · Familiar with Computerized Maintenance Management Systems (CMMS), including inventory management and report generation. Minimum experience required to perform this job. · Proven ability to supervise and influence others on the team. · Proven ability to multi-task and prioritize many different projects and workload. · Experience of multi-contractor management. · 4-6 years in the maintenance field with experience in supervising mechanics preferred. · Two years of supervisory experience. Benefits include Associate discount; 401(k) match; medical/dental/vision; HSA; health care FSA; life insurance; short/long-term disability; paid holidays/vacation /sick/bereavement/parental leave; EAP; incentive programs; auto/home insurance discounts; scholarship program; adoption/surrogacy assistance; smoking cessation; child care/cell phone discounts; pet/legal insurance; credit union; referral bonuses. All benefits are subject to applicable plan or program terms (including eligibility terms) and may change from time to time. Contact your TJX representative for more information. In addition to our open door policy and supportive work environment, we also strive to provide a competitive salary and benefits package. TJX considers all applicants for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, gender identity and expression, marital or military status, or based on any individual's status in any group or class protected by applicable federal, state, or local law. TJX also provides reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disabilities Act and applicable state and local law. Address: 2000 Valley Brook Avenue Location: USA TJ Maxx 3PL (East) 2000 Valley Brook Avenue This position has a starting salary range of $61,000.00 to $82,100.00 per year. Actual starting pay is determined by a number of factors, including relevant skills, qualifications, and experience.

Job Title: Human Resources Manager Location: Paterson, New Jersey Position Summary We are seeking a seasoned and strategic Human Resources Manager to lead and manage all HR functions across our organization. This individual will play a critical role in shaping company culture, ensuring compliance, and driving initiatives that support both our employees and business objectives. The ideal candidate is hands-on, experienced in manufacturing environments, and fluent in Spanish to effectively communicate with a large portion of our workforce. Key Responsibilities • Lead all aspects of Human Resources, including recruitment, employee relations, performance management, training, and compliance, • Serve as a strategic partner to senior leadership, aligning HR initiatives with business goals, • Oversee and ensure compliance with federal, state, and local labor laws and regulations, • Manage employee relations issues with professionalism and cultural sensitivity, • Develop and implement HR policies and procedures tailored to a manufacturing environment, • Drive employee engagement and retention strategies, • Oversee payroll and benefits administration, • Lead safety and workplace compliance initiatives in collaboration with operations Qualifications • Bachelor’s degree in Human Resources, Business Administration, or related field, • 8–12+ years of progressive HR experience, with at least 3–5 years in a leadership role, • Prior experience in food manufacturing or a similar industrial environment strongly preferred, • Fluent in Spanish (required), • Strong knowledge of employment laws and HR best practices, • Proven ability to manage complex employee relations issues, • Experience working in a fast-paced, high-growth environment, • Excellent communication, leadership, and organizational skills What We Offer • Competitive salary, • Comprehensive benefits package (health, dental, vision, 401k), • Opportunity to make a significant impact in a growing organization, • Collaborative and team-oriented work environment, • We are an equal opportunity employer and value diversity in our workforce.

Position Overview Jansons Associates, Inc. is looking for a seasoned, field-first Project Manager with a proven track record of steering mechanical construction projects from inception to successful completion. Because our work involves sophisticated, complex exhaust installations in demanding environments (such as healthcare, transit hubs, and high-density residential towers), this role heavily favors field leadership and site-level execution over desk management. Key Responsibilities • Full Lifecycle Management: Take complete ownership of projects from estimating hand-off through material procurement, scheduling, field execution, and final closeout., • On-Site Leadership: Spend significant time on project sites managing field crews, overseeing complex installations (such as multi-story chimney stacks), and maintaining strict quality control., • Safety Enforcement: Act as the primary champion for job site safety, ensuring all field activities align with OSHA regulations and Jansons’ corporate safety standards., • Stakeholder Management: Serve as the main point of contact for General Contractors, facility owners, and inspectors, representing Jansons with professionalism and technical authority., • Financial Oversight: Manage project budgets, track labor costs, coordinate material orders, and handle change orders efficiently. Qualifications & Skills • Experience: 8+ years of dedicated project management experience within mechanical construction, heavy MEP, industrial ventilation, or specialty steel erection., • Certifications: OSHA 30 certification is mandatory., • Education: A background or degree in Mechanical or Civil Engineering is highly preferred/excellent, but equivalent field-management expertise will be considered., • Leadership Style: A proactive, visible leader who prefers being active in the field, troubleshooting alongside site foremen and resolving layout challenges in real time., • Logistics Expertise: Proven ability to manage tight construction schedules, crane rigging logistics, and urban site constraints. Compensation & Benefits • Type: Full-Time, Permanent, • Benefits: Comprehensive health benefits package, retirement savings plan, and paid vacation/PTO., • Salary: $100-120K per year/Competitive Based on Experience

Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio! IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. The Training Manager – Fleet Maintenance & Technical Development leads the design, implementation, and continuous improvement of Interstate Waste Services’ company-wide maintenance and operations training programs. This role ensures alignment with IWS’s World Class Maintenance standards, safety culture, and operational excellence goals. The manager oversees technical training for refuse trucks, tractors and trailers, heavy equipment, and support assets, fostering technician skill development, compliance, and performance improvement. • Develop, implement, and manage a comprehensive technical training curriculum for all maintenance positions across asset classes., • Establish and maintain competency matrices, certification programs, and technician development paths., • Coordinate OEM and vendor-based training programs with partners such as Mack, Peterbilt, Battle Motors, Heil, McNeilus, CAT, Volvo, etc., • Integrate LMS and TMT Fleet Maintenance data to track training effectiveness on KPIs such as PM compliance, breakdown percentage, and labor efficiency., • Conduct shop audits and skill assessments to validate training adoption and identify development needs., • Collaborate with Safety and Compliance to ensure all technical training includes OSHA, DOT, and environmental compliance components., • Lead the development of leadership training for Maintenance Managers and Directors focusing on coaching, team building, and KPI management., • Develop and utilize reports and dashboards to communicate training metrics and improvements to executive leadership., • Support acquisitions and new shop integrations with rapid training and onboarding programs., • Serve as liaison between Corporate Maintenance, Safety, HR, and field operations to ensure consistency in training delivery and compliance. Education and Experience • Required: High School Diploma with 7+ years of progressive maintenance or training experience., • Preferred: Bachelor’s Degree in a related field with 5+ years of leadership experience in fleet or technical training. Certificates, Licenses, Registrations • ASE or OEM certifications preferred but not required Other Knowledge, Skills, or Abilities Required • Proficiency in Microsoft Office Suite and Learning Management Systems (LMS)., • Ability to analyze data from TMT or comparable fleet software to measure training effectiveness., • Strong communication and presentation skills., • Knowledge of safety regulations, OSHA, and DOT standards., • Self-starter with organizational and follow-through abilities. This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Overview: Shift: Monday-Friday 7:00 AM - 4:30 PM Pay Rate: $28.00-$32.00 per hour Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Connecticut, with a state-of-the-art rail served landfill located in Ohio. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: The A Welder / Fabricator is a senior-level technician responsible for high-quality welding, fabrication, and structural rebuilding of steel containers and compactors. This role requires advanced skills in MIG and stick welding and custom fabrication. The A Welder works independently on complex repair tasks and supports the training and development of entry-level team members. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Perform advanced MIG welding, stick welding and metal fabrication on a variety of container types and compactor components., • Rebuild or replace structural frames, bottoms, lids, caster brackets, and mechanical parts using custom-cut steel., • Interpret repair orders and/or sketches to execute precise rebuilds or modifications., • Use cutting torches, plasma cutters, grinders, and bending tools to shape and prepare materials., • Lead fabrication of specialized equipment or container configurations as needed for customer orders., • Perform quality control checks to ensure all welds meet company standards., • Mentor and train junior welders and assist with onboarding of new hires., • Maintain clean and organized welding area and perform basic preventative maintenance on shop tools., • Track parts used and time spent on custom or complex builds for cost analysis., • Collaborate with supervisors Requirements and Qualifications::, • Minimum 3–5 years MIG welding, stick welding and fabrication experience in industrial or structural repair settings., • Proven ability to perform precise welds in various positions and on worn or contaminated metal., • Advanced skills using fabrication tools including shears, brakes, torches, and weld jigs., • Self-motivated and capable of leading complex projects with minimal supervision., • Strong safety awareness and adherence to PPE and shop protocols., • Ability to lift heavy materials, work outdoors in all weather conditions, and operate yard equipment as needed. Work Environment This role involves working in a combination of indoor shop and outdoor yard environments. Frequent exposure to welding heat, welding fumes, grinding dust, metal shavings, and heavy lifting is expected. Welding hood, gloves, respirator (when applicable), safety glasses, steel-toe boots, and hearing protection are required daily. Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $28.00/Hr. Salary Range Maximum: USD $32.00/Hr.

Overview: Schedule: Monday-Saturday 6:30 AM-3:00 PM Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio! IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • General construction activities such as shoveling, lifting, pulling, • Perform traffic control such as guiding vehicles and equipment to appropriate areas, placing signs and cones for vehicle direction, • Effective communication with drivers, employees, and management via hand held radios and CBs, • Perform site clean-up, • Clean up of vehicles and equipment as needed, • Driving employees to their work stations as needed, • Fuel vehicles and equipment, • Set-up/ secure wind fences and landfill coverings, • Follow OSHA safety standards and wear required PPE, • Perform other duties assigned by manager as necessary Requirements and Qualifications::, • Applicants must be at least 18 years of age and legally eligible to work in the United States, • 1 year of relevant labor experience is preferred, • Able to work in an outdoor environment on a constant basis while being exposed to variable weather conditions, temperatures, chemicals, dust, fumes, smells, and loud noises., • Must be able to lift/push/pull at least 50 pounds, • Experience operating equipment is a plus, • Valid Driver's License preferred Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $18.00/Hr. Salary Range Maximum: USD $18.00/Hr.

Brimar Industries is looking for a highly motivated and technically capable Inside Sales Representative to join our growing team. This role is essential to delivering a fast, professional, and solution-oriented experience to our existing customer base. The ideal candidate is an exceptional communicator, a confident negotiator, and an agile multitasker who thrives in a fast-paced, B2B sales environment. You will be responsible for responding to inbound requests for quotes (RFQs), guiding customers through technical product configurations, and building long-term relationships that turn one-time buyers into loyal customers. Key Responsibilities: Sales Execution • Respond promptly and professionally to inbound RFQs generated by marketing, ensuring rapid engagement with existing customers., • Provide consultative pre-sales support including technical product guidance, solution configuration, and use-case alignment., • Manage the full sales cycle from quote to close using HubSpot CRM and digital quote-to-order platforms., • Own and update your pipeline, ensuring timely follow-up and consistent communication with all active opportunities. Customer Engagement • Conduct discovery calls to understand customer needs, project requirements, and purchasing timelines., • Provide an outstanding customer experience with a solutions-focused, value-driven approach., • Navigate complex procurement scenarios and lead negotiations with professionalism and confidence. Technical & Market Knowledge • Demonstrate and grow technical product knowledge across Brimar’s portfolio of signage, labeling, and traffic control products., • Understand and communicate relevant industrial standards and certifications such as ANSI Z535, OSHA 1910.145, MUTCD (Manual on Uniform Traffic Control Devices), and NFPA (National Fire Protection Association)standards., • Stay informed about competitor offerings and positioning to effectively differentiate Brimar’s solutions. Process Management • Maintain accurate records and sales activity within HubSpot CRM., • Work collaboratively with operations, product, and customer service teams to ensure seamless order fulfillment and post-sale support., • Identify and suggest improvements to tools, processes, or workflows that improve sales efficiency or customer satisfaction. Qualifications • 3+ years of inside sales experience in a comparable industry (e.g., industrial safety, hardware, tools, or technical B2B products)., • Proven experience selling physical products that require inventory coordination and meet regulatory certifications., • Proficiency with HubSpot CRM and digital quote-to-order platforms., • Strong discovery, qualification, and negotiation skills., • Comfortable managing multiple concurrent opportunities and follow-ups in a structured, organized manner., • Self-starter with strong drive for performance and continuous learning., • Passionate about delivering value and solving real-world safety challenges for customers., • Highly organized, detail-oriented, and able to thrive in a fast-paced sales environment. Preferred Qualifications • Knowledge of industrial safety regulations and product certifications (e.g., ANSI, OSHA, MUTCD, NFPA)., • Experience in B2B sales to government, institutional, or industrial buyers., • Familiarity with manufacturing lead times, logistics, and inventory-based sales cycles.

What We Offer • Compensation: Competitive pay based on experience, with opportunities for growth as you expand your skills and certifications. Pay for this role will range from $22-$26/hr based on experience., • Benefits: Health, dental, vision, 401(k) retirement savings plan with company match., • Time Off: Paid time off and paid holidays to support your work/life balance., • Training & Development: Hands-on training in all aspects of tree care, including pruning, removals, cable bracing, and equipment operation, with continuing education opportunities., • Team & Collaborative Environment: Work alongside highly skilled tree care professionals in a safety-first culture., • Tools for Success: Access to modern equipment, tools, and resources that help you deliver top-quality service and grow your expertise. Position Summary Looking for a place where you can thrive? SavATree's mission is to take our passion for nature and keep this country's outdoors beautiful and flourishing. Through our comprehensive tree, shrub, and lawn care, we work hard to make sure our customers have attractive, healthy, and cared-for green spaces to enjoy. Over the last thirty years, we have opened new offices across the country, and we are looking for people who want to grow with us. The General Tree Care team are the muscle of our operation. These industrial athletes work together to provide high-quality tree care, helping to maintain and preserve the overall health of our clients' landscapes. What a Day is Like As a General Tree Care Groundsperson, you will be part of a crew that delivers high-quality tree care to our clients. You will be involved in all aspects of pruning, removals, cable bracing, and other tree care services. You will operate equipment safely, perform assigned job tasks efficiently, and provide exceptional service to clients. You will have the opportunity to work outdoors on beautiful properties while collaborating with a team of focused, talented professionals. What Kind of Person We're Looking For • Demonstrated knowledge of proper use of General Tree Care equipment, • Previous landscaping experience with safe lifting techniques and proper procedures for carrying and stacking brush on client properties, • Basic knowledge of common tree identification (a plus), • Knowledge of two to three basic knots plus Weaver Knot, Clove Hitch Knot, and Gilhooligan Knot, • Experience with proper pruning equipment such as hand snips, pruners, pole saws, etc. What is Essential • Willingness to complete required trainings to obtain needed certifications and licenses, • Desire to work outdoors, • Valid driver's license to operate service-line vehicles (CDL a plus), • Must be authorized to work lawfully in the U.S. Physical Demands These physical demands must be met to successfully perform the essential functions of this job. While performing the duties of the job, the employee is regularly required to lift and/or move up to fifty (50) pounds. About SavATree We want everyone to be able to identify and achieve their own version of success, which means giving each team member the room and opportunity to grow. To ensure that everyone has the best chance to succeed, we invest heavily in training and continuing education. We make it easy for team members to reach out and get the help they need, even when it's from the other side of the country. We pride ourselves on creating an environment where each team member has the resources and opportunities to advance their career and become a go-to subject matter expert. That's why we often say: When you work here, you thrive here. Equal Opportunity SavATree is an equal opportunity employer and a drug-free workplace. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

We are seeking an experienced Account Manager who excels at expanding existing relationships and growing accounts from initial orders into large, recurring business partnerships. This role is ideal for someone who can move beyond a single point of contact and strategically broaden engagement across an organization. The right candidate brings a structured, disciplined approach to account management—combining thoughtful discovery, strategic account planning, and consistent execution to drive measurable growth. Key Responsibilities • Own and grow a portfolio of existing customer accounts, • Expand relationships beyond initial contacts to multiple stakeholders and departments, • Develop and execute comprehensive account plans focused on long-term growth, • Conduct deep discovery to understand customer business models, challenges, and opportunities, • Identify and pursue upsell and cross-sell opportunities across Brimar’s product lines, • Maintain a highly organized, structured, and documented approach to account management using CRM systems (e.g., Salesforce, HubSpot), including tracking activities, opportunities, and account plans, • Collaborate with internal teams (sales, operations, customer service) to deliver a seamless customer experience, • Travel regularly (approximately 50%) to meet with customers and strengthen relationships Qualifications • 5+ years of experience in account management or account-based selling, • Proven track record of growing accounts from initial purchase to significant recurring revenue, • Demonstrated success in expanding relationships within existing accounts, • Strong experience building and managing strategic account plans, • Excellent discovery skills with the ability to uncover customer needs and pain points, • Highly organized with a disciplined approach to documentation and pipeline management, • Proficiency in CRM systems (e.g., Salesforce, HubSpot) with a commitment to maintaining accurate, up-to-date account data., • Strong communication and relationship-building skills, • Self-motivated and comfortable working in a remote environment Preferred Experience • Background in signage, traffic, safety, or crowd control product lines, • Experience selling into industrial, construction, facilities, or public sector environments About Brimar Industries Brimar Industries is growing rapidly, and we’re excited to deepen our relationships with customers and play a more strategic role in advancing their businesses. From sports venues and broadcasters to airports, schools, and entertainment facilities, we provide the signage, traffic, and crowd control solutions organizations rely on to keep their employees and customers safe. As we continue to expand, we are looking for talented professionals who are passionate about building strong partnerships and delivering meaningful value to customers across a wide range of industries.

What We Offer Compensation: Competitive pay based on experience, with opportunities for growth as you expand your skills and certifications. Pay for this role will range from $22-$26/hr based on experience. Benefits: Health, dental, vision, 401(k) retirement savings plan with company match. Time Off: Paid time off and paid holidays to support your work/life balance. Training & Development: Hands-on training in all aspects of tree care, including pruning, removals, cable bracing, and equipment operation, with continuing education opportunities. Team & Collaborative Environment: Work alongside highly skilled tree care professionals in a safety-first culture. Tools for Success: Access to modern equipment, tools, and resources that help you deliver top-quality service and grow your expertise. Position Summary Looking for a place where you can thrive? SavATree's mission is to take our passion for nature and keep this country's outdoors beautiful and flourishing. Through our comprehensive tree, shrub, and lawn care, we work hard to make sure our customers have attractive, healthy, and cared-for green spaces to enjoy. Over the last thirty years, we have opened new offices across the country, and we are looking for people who want to grow with us. The General Tree Care team are the muscle of our operation. These industrial athletes work together to provide high-quality tree care, helping to maintain and preserve the overall health of our clients' landscapes. What a Day is Like As a General Tree Care Groundsperson, you will be part of a crew that delivers high-quality tree care to our clients. You will be involved in all aspects of pruning, removals, cable bracing, and other tree care services. You will operate equipment safely, perform assigned job tasks efficiently, and provide exceptional service to clients. You will have the opportunity to work outdoors on beautiful properties while collaborating with a team of focused, talented professionals. What Kind of Person We're Looking For Demonstrated knowledge of proper use of General Tree Care equipment Previous landscaping experience with safe lifting techniques and proper procedures for carrying and stacking brush on client properties Basic knowledge of common tree identification (a plus) Knowledge of two to three basic knots plus Weaver Knot, Clove Hitch Knot, and Gilhooligan Knot Experience with proper pruning equipment such as hand snips, pruners, pole saws, etc. What is Essential Willingness to complete required trainings to obtain needed certifications and licenses Desire to work outdoors Valid driver's license to operate service-line vehicles (CDL a plus) * Must be authorized to work lawfully in the U.S. Physical Demands These physical demands must be met to successfully perform the essential functions of this job. While performing the duties of the job, the employee is regularly required to lift and/or move up to fifty (50) pounds. About SavATree We want everyone to be able to identify and achieve their own version of success, which means giving each team member the room and opportunity to grow. To ensure that everyone has the best chance to succeed, we invest heavily in training and continuing education. We make it easy for team members to reach out and get the help they need, even when it's from the other side of the country. We pride ourselves on creating an environment where each team member has the resources and opportunities to advance their career and become a go-to subject matter expert. That's why we often say: When you work here, you thrive here. Equal Opportunity SavATree is an equal opportunity employer and a drug-free workplace.

Job DescriptionJob Title: Forklift Operator Job Description This role involves operating a single propane sit-down forklift in an outdoor concrete yard to handle concrete and asphalt products. You will move, stage, and reorganize materials, operate pallet-handling machinery and a stretch wrapper, and perform general labor tasks such as pallet sorting and yard cleaning. The position requires comfort with outdoor work, heavy lifting, and working in varying weather conditions. Responsibilities • Operate a single propane sit-down forklift safely and efficiently in an outdoor concrete yard., • Handle concrete and asphalt products, including loading, unloading, and moving materials throughout the yard., • Use a forklift to load pallets into a pallet injector and start the machine according to operating procedures., • Run the stretch wrapper machine and make adjustments as needed to ensure secure and consistent wrapping of products., • Organize and reorganize pallets and wrapped stacks to maintain a clean, efficient, and well-structured yard layout., • Perform material staging to support production and shipping activities., • Complete approximately 25% manual pallet sorting to ensure quality and proper organization of materials., • Carry out general labor duties such as sweeping with a broom, picking up broken concrete blocks, and shoveling debris to keep the work area clean and safe., • Use pallet jacks and other basic material handling equipment as required., • Follow all safety procedures and guidelines while operating machinery and performing physical tasks., • Work collaboratively with production and yard teams to meet daily and weekly production goals., • Adapt to varying workload demands, including overtime, while maintaining high standards of safety and productivity.Essential Skills, • At least 2 years of sit-down forklift operating experience., • Proven experience with outdoor labor and comfort working in the elements., • Ability to perform heavy lifting as part of daily duties., • Experience with material handling in a production or yard environment., • Ability to operate machinery such as pallet injectors and stretch wrappers or similar equipment., • Familiarity with working in a concrete yard or similar industrial outdoor setting., • Capability to perform general labor tasks including sweeping, shoveling, and manual pallet sorting., • Strong attention to safety and adherence to operating procedures., • Reliability in working extended shifts and overtime when needed.Additional Skills & Qualifications, • Experience with single propane sit-down forklifts in an outdoor environment., • Background in handling concrete and asphalt products or other heavy building materials., • Experience with staging materials for production or shipping., • Comfort using pallet jacks and other basic material handling tools., • Ability to maintain organization in a busy yard with frequent movement of pallets and wrapped stacks., • Willingness to perform repetitive physical tasks and manual sorting., • Strong work ethic and ability to work independently with minimal supervision., • Adaptability to changing priorities and production needs.Why Work Here? You will join a growing organization that offers a long-term opportunity with consistent hours and regular overtime for those seeking additional income. The role provides the chance to build and deepen your skills in forklift operation and material handling within a stable, production-focused environment. You will work with a team that values reliability, safety, and strong work ethic, offering a clear path to steady, ongoing employment. Work Environment This is an outdoor, labor-intensive role in a concrete yard, working around concrete and asphalt products and production equipment. The position offers two schedule options: one third shift from 5:00 p.m. to 5:00 a.m., Monday through Friday, and one first shift from 5:00 a.m. to 5:00 p.m., Monday through Friday. There are typically 10–20 hours of overtime available each week, depending on workload. The work involves heavy lifting, manual pallet sorting, and regular use of a propane sit-down forklift, pallet jacks, and machinery such as pallet injectors and stretch wrappers. You will work in all weather conditions, so appropriate outdoor work attire and footwear suitable for a concrete yard environment are necessary. Job Type & Location This is a Contract to Hire position based out of Lyndhurst, NJ. Pay and Benefits The pay range for this position is $20.00 - $22.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Lyndhurst,NJ. Application Deadline This position is anticipated to close on Jun 5, 2026. About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Location US-NJ-Fairfield Positions 1 Category Manufacturing At a Glance Legrand has an exciting opportunity for a Sr. Manufacturing Engineer to join the Audio Video Division in Fairfield, NJ. The Sr. Manufacturing Engineer will provide day to day support on products being built in the manufacturing assembly area(s). This would include working with the assembly team in the identification of continuous improvement ideas that utilize lean manufacturing principles. These improvements would target processes and procedures that will enhance the quality and repeatability of the assembly process and increase productivity. What Will You Do? Identify process and assembly improvements and work with a senior engineer to implement improvement ideas into the manufacturing area using lean manufacturing principles • Provide troubleshooting support to the manufacturing floor, • Create and maintain manufacturing processes and procedures, • Provide input on the design of new product line assembly cells and implement their setup, • Provide process and procedural training to assembly personnel, • Participate in new product design reviews to identify design for manufacturability (DFM) issues and opportunities, • Review assembly documentation for accuracy through ECO reviews, • Work with packaging vendors to design custom packaging solution for high volume assemblies, • Design and implement assembly fixtures that will increase efficiencies on the manufacturing floor, • Provide Return on Investment (ROI) justification on capital expenditures, • Understand workplace hazards and take steps to proactively prevent and report hazards or injuries in the workplace. Cooperate in Safety Programs, initiatives, and investigations., • Demonstrate our five core values of Integrity, Customer Responsiveness, Innovation, Passionate Contribution & Empowerment and Continuous Improvement Education and Experience: • Bachelor of Science degree in manufacturing, industrial or mechanical engineering or other related technical degree with a minimum of six (6) months engineering experience in a manufacturing environment; or combination of relevant education and experience, • 3D CAD work experience Required Knowledge, Skills and Abilities: • Excellent verbal and written communication skills, • Excellent troubleshooting and problem solving skills, • An understanding of lean manufacturing principles, • Ability to work in a team environment, • Proficient in the use of personal computers, internet and Microsoft Office suite of software including Word, Excel and Outlook (or related e-mail system), • Self-motivated with the ability to work with minimal supervision, • Excellent interpersonal skills, • Ability to interpret standards, specifications, procedures, drawings, etc., • Strong mechanical aptitude, • Ability to train and motivate employees at all levels, • Ability to make sound decisions within established guidelines, • Ability to demonstrate flexible and efficient time management and to appropriately prioritize workload based upon organization or department needs, • Be detail-oriented and have excellent follow-through skills, • Must possess high degree of professionalism, • Must be available for extended, varied work hours based on business need Preferred Knowledge, Skills and Abilities: • Experience with Solidworks, • Experience with SAP, • Labeling software experience, • Machine shop experience, • Multi-lingual (Spanish, Laotian, etc.) WORKING CONDITIONS/PHYSICAL DEMANDS: • While performing the duties of this job, the employee may be required to reach above shoulder level, reach below knee level, bend, stoop, squat/kneel, climb; and lift, push or pull 50 lbs. Must have the ability to make coordinated movements of the fingers and hands to grasp, manipulate, and to perform data entry on a keyboard., • Steel-toed shoes are required for working in this position, • Combination general office and regular shop assembly/distribution center environment (no air conditioning), • May require regular ground travel to other company facilities within local metropolitan area, • Long-distance or air travel as needed - not to exceed 5% travel About Legrand Legrand is the global specialist in electrical and digital building infrastructures. Our comprehensive offering of solutions for residential, commercial, and data center markets makes us a benchmark for customers worldwide. We harness technological and societal trends with lasting impacts on buildings with the purpose of improving life by transforming the spaces where people live, work, and meet with electrical and digital infrastructures and connected solutions that are simple, innovative, and sustainable. Legrand is a global, publicly traded company listed on the Euronext (Legrand SA EPA: LR). For more information, visit www.legrandgroup.com/en About Legrand North and Central America Legrand, North & Central America (LNCA) is a leader in the AV, Lighting & Controls, Electrical, and Data Center markets. LNCA offers comprehensive medical, dental, and vision coverage, as well as distinctive benefits like a high employer 401K match, paid time off (PTO) and holiday pay, short-term and long-term disability benefit plans, above-benchmark paid maternity and parental leave, bonus opportunities in accordance with the Company's incentive plans, paid time off to volunteer, and an active/growing Employee Resource Group network. For more information, visit legrand.us About Legrand's Audio Video (AV) Division Legrand AV is a global leader in designing and manufacturing electrical, data, and AV solutions. For their customers worldwide, Legrand AV is focused on providing the foundation for amazing AV experiences through innovative solutions and exceptional service that solve their customers' AV integration and technology challenges. Today and tomorrow are about keeping people connected. Legrand and the AV industry are uniquely positioned to deliver just that. Legrand AV solutions support technology to rebuild and maintain vital connections around the world. The tenacity and determination to stay connected, no matter what it takes is proof that nothing will stop Legrand AV's pursuit for life. Despite the challenges, people have adapted and found ways to collaborate, to meet, to greet, to teach, to learn. http://www.legrand.us http://www.youtube.com/legrandna http://www.linkedin.com/company/44580 http://twitter.com/legrandNA Equal Opportunity Employer

Job DescriptionRole Overview: The Maintenance Electrician is responsible for installing, maintaining, and repairing industrial electrical systems, supporting both plant operations and construction-related projects. This role requires a strong understanding of low and high voltage systems, schematics, and NEC standards, along with hands-on experience in troubleshooting and system diagnostics. The ideal candidate brings experience with PLC systems, blueprint interpretation, and construction environments, ensuring safe and efficient operation of electrical equipment across multiple settings. Job Requirements: • Proven experience as an industrial or commercial electrician, with a strong background in electrical systems maintenance., • Solid understanding of NEC standards, schematics, blueprint reading, and wiring diagrams., • Experience working with low voltage and high voltage electrical systems., • Familiarity with programmable logic controllers (PLCs) for troubleshooting and automation support., • Experience using hand tools, power tools, multimeters, ohmmeters, and other testing equipment., • Exposure to construction site environments, including renovation projects., • Strong understanding of electrical installations and system layouts., • Comfortable working both independently and within a team in fast-paced environments., • Strong problem-solving skills and attention to detail when diagnosing electrical issues., • Relevant electrical certifications or licenses preferred (based on project requirements). Physical Requirements: • Ability to perform tasks involving standing, walking, and hands-on electrical work throughout the shift., • Frequent use of tools and equipment for installation, maintenance, and repairs., • Work may involve construction or industrial environments, requiring mobility and adaptability. Work Environment: • Work performed in industrial facilities and construction sites., • Exposure to active electrical systems, tools, and equipment., • Requires adherence to strict safety protocols and electrical codes. Key Responsibilities: • Install & Repair Electrical Systems: Install, troubleshoot, and repair electrical systems and components using appropriate tools and testing equipment., • Read & Interpret Technical Documents: Analyze schematics, blueprints, and wiring diagrams to perform accurate installations and repairs., • Maintain Electrical Systems: Support both low and high voltage systems while ensuring compliance with NEC standards., • Support PLC Systems: Program and troubleshoot PLC systems to maintain automation and operational efficiency., • Perform Preventive Inspections: Conduct routine inspections to identify and resolve potential issues before failures occur., • Support Construction & Renovation Projects: Assist with electrical work on construction and renovation projects, collaborating with other trades., • Ensure Safety Compliance: Follow all electrical codes, safety regulations, and company policies to maintain a safe work environment., • Use Tools & Equipment: Operate hand tools, power tools, and diagnostic equipment to complete tasks efficiently., • Document Work & Report Issues: Maintain records of maintenance activities and report system failures or safety concerns., • Perform other job-related duties as assigned.GRIT Staffing & HR Solutions is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees and applicants. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. If you require a reasonable accommodation during the application or interview process, please contact us at eoc@gritstaffinghr.com so we can assist you.

Job DescriptionBenefits: • Dental insurance, • Opportunity for advancement, • Paid time off, • Training & development, • Vision insurance, • 401(k) matching, • Competitive salary, • Health insurance The job of an HVAC installer involves installing, repairing, and maintaining HVAC systems in residential, commercial, and industrial settings. Here is a typical job description for an HVAC installer: The HVAC installer will be responsible for installing HVAC equipment, including furnaces, air conditioners, and ventilation systems. The ideal candidate will have a strong understanding of HVAC systems and be able to work independently and as part of a team. Responsibilities: • Install HVAC equipment in residential and commercial settings, • Perform maintenance and repair on existing HVAC systems, • Troubleshoot and diagnose problems with HVAC equipment, • Maintain a safe work environment and adhere to safety protocols, • Provide excellent customer service and ensure customer satisfaction, • Maintain accurate records of work performed and materials used, • Attend training sessions and stay up-to-date with industry developments Requirements • High school diploma or equivalent, • Technical school training or apprenticeship in HVAC installation and repair, • Experience in HVAC installation and repair, • Strong mechanical aptitude and problem-solving skills, • Knowledge of HVAC systems and components, • Ability to read and interpret blueprints and schematics, • Excellent communication and customer service skills, • Valid driver's license and reliable transportation, • Ability to lift heavy equipment and work in confined spaces

Job Description Commercial Refrigeration Installer & Driver – Lead Precision Assembly for High-Capacity Refrigeration Units Job Overview Company: Coldstat Refrigeration Salary/Pay Rate: $25 to $40 per hour plus Year-End Bonus Location: Paramus, NJ Job/Employment Type: Full Time Project Scope: Commercial Refrigeration/HVAC Mechanical (Commercial, Industrial) Schedule: Monday - Friday and Overtime Mandatory Licenses & Certifications: None Required The Opportunity You will be the driving force behind the physical infrastructure of our clients' refrigeration systems, ensuring that every walk-in box is built to last. This role offers the unique opportunity to manage the full lifecycle of onsite delivery and precision assembly while working with a 40-year industry leader that treats its team like family. How You Will Make an Impact Build and assemble walk-in refrigeration boxes from the ground up using specialized power and hand tools. Unload heavy refrigeration equipment and transport all necessary components safely into the client facility. Utilize levels and precision measuring tools to ensure every panel and case line-up is perfectly aligned. Operate forklifts or Lulls to maneuver large-scale equipment across diverse job site terrains. Set and secure complex case line-ups to prepare for final piping and electrical integration. Coordinate the delivery of essential materials to project sites to maintain strict construction timelines. Required Qualifications & Experience Proven experience in the assembly and installation of professional walk-in refrigeration boxes. Mastery of basic hand tools, power tools, and precision leveling equipment. Ability to manage the physical demands of unloading trucks and positioning heavy industrial equipment. Demonstrated track record of reliability and punctuality in a field operations setting. Strong spatial awareness and mechanical aptitude for complex equipment assembly. Preferred Qualifications & Experience 3 years of experience in commercial refrigeration installation or delivery. Certified or experienced in operating forklifts or Lulls. Previous experience setting up commercial case line-ups. Ability to navigate and deliver equipment to diverse job site environments. Compensation & Benefits Weekly pay cycle with Year-End Bonus eligibility. Comprehensive Medical, Dental, and Vision insurance plans. Health Savings Account (HSA) and Retirement Savings Program. Paid Time Off Paid training, certifications, and safety equipment provided. Uniforms provided. Life and Disability insurance options. About Us Coldstat Refrigeration is a premier name in Commercial Refrigeration/HVAC Mechanical (Commercial, Industrial) family-owned and operated for over 40 years. We pride ourselves on combining state-of-the-art technology with a supportive culture that treats our team like family. Our commitment to workmanship and customer service has made us a trusted partner in the industry. Learn more at www.coldstat.com. Coldstat Refrigeration is an Equal Opportunity Employer and does not discriminate on the basis of race, color, religion, sex (including pregnancy, gender expression, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or any other status protected by law or regulations. It is our intention that all qualified applicants be given equal opportunity and that selection decisions be based on job-related factors.

Job DescriptionDescription: AAF International offers the most comprehensive clean air solutions available across the globe. Selling under the American Air Filter® and the AAF International® brand names, AAF International has been an industry pioneer since 1921 with manufacturing operations in 22 countries and over 6000 employees globally. Our products are the industry benchmarks for quality and performance. Our applications include commercial, industrial and residential solutions from the filters used in your home to the most critical cleanroom and power generation applications. We are a member of the Daikin Group, the world's largest air conditioning provider with $30 billion in revenue and over 98,000 employees worldwide. Founded in 1924, Daikin has grown into a diversified industrial manufacturing company offering solutions in clean, air, air conditioning, refrigeration, chemicals, oil hydraulics, defense systems and electronics. Our culture of continuous improvement, safety and world class operations is driven by our people-centered management philosophy. This philosophy is built around mutual selection: that while AAF seeks top talent people to join and deliver on our team, we also want each team member to receive job satisfaction, growth & development, and continued happiness in being a long-term member of the AAF family. This is fueled by our belief in treating our people, our supply partners, our customers and our environment with the trust and respect we each require, and our passion to give back to our community for our success. Read more about our philosophy at: http://www.daikin.com/about/corporate/philosophy/index.html AAF International is an Equal Opportunity Employer M/F/Disability/Veteran. We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, sex, sexual orientation, gender identity, national origin, citizenship, veteran status, uniform servicemember status, age, disability or any other legally recognized protected personal characteristics. Key Accountabilities: • Install HVAC filters in various types of air handlers., • Perform visual inspections of each unit during the service., • Take notes of any deficiencies and forward it to manager to contact the customer., • Ensure that the service truck is maintained properly and as noted in vehicles specification guide., • Accountability of all tools., • Loading truck, keep truck clean., • Make initial contact with the person in charge when arriving on site and explain the day's work., • At the completion of the work will remove and dispose of all trash that was created from the work., • Have the paperwork signed., • Make deliveries and pickups when necessary., • Perform other duties as assigned., • Date and initial filters in filter bank., • Must be a team player, able to work w/ others., • Able to climb all types of ladders., • Not be afraid of heights., • Must clean all debris and spent filters off of roof tops and dispose properly., • On occasion be able to go out of town for service jobs., • Assist in warehouse when not on a service job. Position Requirements: • High School diploma., • Basic Math and reading skills., • Must have transportation to and from the branch office., • Must be able to climb ladders and work in heights., • Able to lift up to 75lbs pounds., • Experience working both indoors and outdoors., • Experience driving box trucks of various sizes., • Forklift experience a plus., • Comfortable working with hand tools., • Valid driver’s license., • Clean driving record., • Must be able to pass a Drug Panel and DOT Physical Examination., • Full-Time Availability.Requirements: Position Requirements: • High School diploma., • Basic Math and reading skills., • Must have transportation to and from the branch office., • Must be able to climb ladders and work in heights., • Able to lift up to 75lbs pounds., • Experience working both indoors and outdoors., • Experience driving box trucks of various sizes., • Forklift experience a plus., • Comfortable working with hand tools., • Valid driver’s license., • Clean driving record., • Must be able to pass a Drug Panel and DOT Physical Examination., • Full-Time Availability.

Job Description About Us: Pro Volt Electrical Contractors is a growing electrical contracting company serving residential, commercial, and industrial clients throughout Northern New Jersey. We specialize in both new construction and service work, and pride ourselves on delivering high-quality, code-compliant work with a strong focus on customer satisfaction and long-term reliability. Position Summary: We are seeking a reliable, self-motivated Journeyman Electrician to join our team. The ideal candidate will be a well-rounded professional capable of working independently on residential and commercial projects, including service calls, upgrades, troubleshooting, and new installations. This role is perfect for someone who takes pride in their craftsmanship, communicates well, and is eager to grow with a fast-paced, forward-thinking company. Key Responsibilities: Install, maintain, and repair electrical systems in residential and commercial settings Read and interpret blueprints, electrical schematics, and code specifications Troubleshoot electrical issues and perform service work independently Ensure all work complies with the National Electrical Code (NEC) and local building codes Coordinate with contractors, project managers, and inspectors as needed Maintain accurate job records, time tracking, and material usage Mentor apprentices when applicable Keep work sites clean, organized, and safe Qualifications: Minimum 4 years of field experience (residential and commercial) Strong knowledge of NEC, wiring methods, and installation standards Proficiency in using power tools, hand tools, and electrical testing equipment Ability to work independently and manage time effectively Excellent problem-solving and communication skills Valid driver’s license with a clean driving record OSHA 10 or 30 certification (preferred but not required) New Jersey Electrical Journeyman License (preferred but not required) Company DescriptionPro Volt Electrical LLC is a licensed, full-service electrical contracting company based in Hawthorne, New Jersey, serving residential, commercial, and light industrial clients. We specialize in service upgrades, lighting installations, EV charging, panel replacements, remodels, troubleshooting, and electrical design-build projects. Our reputation is built on professionalism, reliability, and top-tier workmanship, backed by hundreds of 5-star reviews. We focus on building long-term relationships with our customers, employees, and partners, and we invest heavily in training, safety, and company culture. At Pro Volt Electrical, we believe our people are our greatest asset. We offer career advancement, leadership opportunities, continuing education, and strong team support. Whether you’re an apprentice just starting your career or an experienced technician, you’ll be valued, supported, and empowered to grow. What Makes Us Different: ✔ Competitive pay with year-round, steady work ✔ Paid holidays and medical benefits ✔ Company vehicles, tools, and training provided ✔ Safe, organized, and professional work environment ✔ Opportunities for advancement and certifications ✔ Family-oriented culture with strong leadership and open communication We take pride in our work and in our team. If you’re looking for a company that values craftsmanship, professionalism, and integrity, Pro Volt Electrical is the place to build your future.Pro Volt Electrical LLC is a licensed, full-service electrical contracting company based in Hawthorne, New Jersey, serving residential, commercial, and light industrial clients. We specialize in service upgrades, lighting installations, EV charging, panel replacements, remodels, troubleshooting, and electrical design-build projects.\r\n\r\nOur reputation is built on professionalism, reliability, and top-tier workmanship, backed by hundreds of 5-star reviews. We focus on building long-term relationships with our customers, employees, and partners, and we invest heavily in training, safety, and company culture.\r\n\r\nAt Pro Volt Electrical, we believe our people are our greatest asset. We offer career advancement, leadership opportunities, continuing education, and strong team support. Whether you’re an apprentice just starting your career or an experienced technician, you’ll be valued, supported, and empowered to grow.\r\n\r\nWhat Makes Us Different:\r\n✔ Competitive pay with year-round, steady work\r\n✔ Paid holidays and medical benefits\r\n✔ Company vehicles, tools, and training provided\r\n✔ Safe, organized, and professional work environment\r\n✔ Opportunities for advancement and certifications\r\n✔ Family-oriented culture with strong leadership and open communication\r\n\r\nWe take pride in our work and in our team. If you’re looking for a company that values craftsmanship, professionalism, and integrity, Pro Volt Electrical is the place to build your future.

Job Description Digistallers Inc. is an open platform for Digital Signage, Audio Video Technicians, and Electrical Engineers, who are seeking contractor work. We are seeking a licensed and experienced Electrician Contractor to lead and manage electrical installations, repairs, and maintenance projects. The ideal candidate will have a strong background in residential, commercial, and industrial electrical work, with the ability to oversee teams, ensure quality compliance, and deliver projects on time and within budget. We deploy contractors across the New York Tri-State Area, CT, Pennsylvania, and New Jersey, and we are actively hiring contractors to train and deploy immediately to work orders. If you are interested in growing your career , please contact Lynn at 917-302-6449 or Charlie at 917-524-6129. You must meet the below requirements to be considered for contractor work. • MUST HAVE A FRIENDLY & PROFESSIONAL ATTITUDE!!!!!!!!!!, • Must be legally permitted to work in the USA., • Read and interpret blueprints, technical diagrams, and specifications, • Ensure all work adheres to local electrical codes and safety standards, • Estimate materials and labor required for projects, • Troubleshoot and resolve complex electrical issues, • Collaborate with clients, suppliers, and other tradespeople, • Must know how to troubleshoot offline media players (CAT 5 / 6 Tester)., • Must have Digital Menu Board experience., • Must have own tools., • Must have own laptop., • ABSOLUTELY MUST own truck, SUV, or mini van. Experience with the following: • MUST HAVE EXPERIENCE Mounting TV/Screens. (Do Not Apply if you don't have this experience)., • Previous work experience with cable installation is a plus., • Valid electrician license/contractor license in [State/Region], • Proven experience as an electrician, with leadership/contracting experience preferred, • Strong knowledge of electrical systems, tools, and safety procedures, • Ability to read schematics and technical diagrams, • Excellent problem-solving and communication skills, • Valid driver’s license and reliable transportation, • Fiber experience a plus. Company DescriptionDigistallers Inc. is an open platform for Digital Signage & Audio Video Technicians, who are seeking contractor work. We deploy contractors across the New York Tri-State Area, and we are actively hiring contractors to train and deploy immediately to work orders.Digistallers Inc. is an open platform for Digital Signage & Audio Video Technicians, who are seeking contractor work. We deploy contractors across the New York Tri-State Area, and we are actively hiring contractors to train and deploy immediately to work orders.

Job Description Staff Management Group is seeking a Stockroom Associate for our client in Wayne, NJ. Please read the ENTIRE job description and ALL of the job requirements BEFORE applying for this position. Schedule: • 2nd Shift: 3PM – 1AM, • Plus Overtime Pay Rate: • $17.13 / hour Job Summary: We are seeking a detail-oriented and reliable Stockroom Associate to join our team. TheStockroom Associate is responsible for receiving, organizing, and managing inventory in thestockroom to ensure smooth store operations. This role supports the sales floor by ensuringproducts are well-stocked and easily accessible. Job Responsibilities: • Receive, unload, and process incoming shipments., • Organize stockroom inventory and maintain a clean, efficient work environment., • Label, tag, and store items in the appropriate locations., • Perform regular stock counts and reconcile discrepancies., • Replenish sales floor with merchandise from the stockroom as needed., • Assist with inventory audits and loss prevention efforts., • Ensure proper handling and storage of all merchandise., • Follow company safety and operational procedures., • Communicate with store team members to meet inventory needs. Job Requirements: • MUST be bilingual - English AND Spanish., • High school diploma or equivalent., • Previous experience in retail or warehouse preferred but not required., • Ability to lift up to [insert weight, e.g., 50 lbs] and stand for extended periods., • Strong attention to detail and organizational skills., • Good communication and teamwork abilities., • Ability to work in a fast-paced environment. Preferred Skills: • Familiarity with inventory software or handheld scanners., • Time management and problem-solving skills., • Dependable and self-motivated Additional Information: Staff Management Group is an equal employment opportunity employer, and all qualified applicants will receive consideration for employment without unlawful discrimination based on race, color, creed, national origin, sex, age, disability, marital status, sexual orientation, or citizenship status. About Staff Management Group: Staff Management Group has over 30 years of experience placing staffing candidates in distribution, manufacturing, production, assembly, and clerical positions. Staff Management Group is one of New Jersey’s leading staffing and recruiting agencies specializing in light industrial and clerical staffing. Come join the team! #IND1

Job Description Job Title: Warehouse Picker Location:Fair Lawn Job Type: Full-Time Salary: $16.50 About Us: Paragon Staffing is a leading industrial company committed to providing top-quality service and products to our customers. We are looking for a motivated and reliable Warehouse Picker to join our team and help us keep operations running smoothly. Job Responsibilities: Accurately pick, pack, and prepare orders for shipment. Follow specific order instructions, ensuring all items are correctly selected. Maintain a clean and organized workspace, ensuring safety protocols are followed. Operate warehouse equipment such as forklifts, pallet jacks, and scanning devices. Assist with inventory management, including restocking and labeling products. Ensure proper handling of fragile or sensitive items. Work with team members to meet daily production and order fulfillment targets. Perform regular quality checks to ensure product accuracy. Requirements: Previous experience in a warehouse or fulfillment center is a plus but not required. Strong attention to detail and organizational skills. Ability to lift and move items weighing up to 50 lbs/kg. Comfortable standing, walking, and bending for long periods. Good communication skills and ability to work as part of a team. Flexibility to work in a fast-paced environment. Ability to operate or willingness to learn to operate warehouse equipment. Benefits: Salary $16.50 hr Powered by JazzHR Yn1jt8IgW9

Job Description Job Title: Case Picker / PIT Machine Operator $20 an hour Job Description Seeking experienced Case Pickers / PIT Machine Operators to support operations in a high-volume warehouse distribution environment. In this role, you will operate powered industrial trucks (PIT) including order pickers, reach trucks, and ride-on pallet jacks, while performing order picking and general warehouse responsibilities. Responsibilities & Essential Skills • Operate order pickers, reach trucks, stand-up forklifts, ride-on pallet jacks, electric pallet jacks, and manual pallet jacks safely & efficiently., • Order picking using RF scanners and follow pick tickets or system-directed tasks, • Work across dry, chilled (32–45°ree;F), and freezer (-10°ree;F) environments while maintaining performance standards, • Handle general labor tasks such as palletizing, staging, and organizing products to support overall warehouse distribution operations., • Follow all warehouse safety guidelines, traffic flows, and operational procedures, • Minimum 3+ months of recent powered industrial truck (PIT) experience within the last 12 months., • Hands-on experience operating:, • Order pickers, • Reach trucks / reach lifts, • Stand-up forklifts, • Ride-on or electric pallet jacks, • Ability to pass E-Verify employment requirements Work Environment This position is based in warehouse settings that include dry storage areas, chill environments typically ranging from 32–45°ree;F, and freezer areas around -10°ree;F. Operators must be fully willing and able to work in all temperature zones as needed. The work environment is a busy, high-volume distribution facility where powered industrial trucks such as order pickers, reach trucks, stand-up forklifts, ride-on pallet jacks, electric pallet jacks, and manual pallet jacks are used regularly. RF scanners and related warehouse technology support order picking and inventory tasks. Schedules vary by department and by the specific machines operated, so flexibility is important. The setting emphasizes safety, productivity, and professional conduct at all times. Job Type & Location This is a Contract to Hire position based out of Clifton, NJ. Pay and Benefits The pay range for this position is $19.00 - $21.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Clifton,NJ. Application Deadline This position is anticipated to close on Jun 10, 2026. About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Non Destructive Testing Film X-ray Level 2 Technician Job Code: 37464 Job Location: Carlstadt, New Jersey Job Schedule: 1st Shift 9/80: Employees work 9 out of every 14 days - totaling 80 hours worked - and have every other Friday off Job Description: L3Harris is seeking an experienced Film Radiographic Testing Level 2 Inspector to process, interpret and evaluate materials, parts and weldments for compliance with required specifications and standards. Essential Functions: \n • Read and interpret information from work instruction documents, drawings and specifications, inspection procedures, material review reports and other source documents, and follow instructions the procedures and requirements needed to perform radiographic inspection of material, parts and weldments. \n, • Perform X-ray level 2 tasks in accordance to work instructions from approved general procedures & techniques. \n, • Set up and operate industrial x-ray equipment. Have the skills and knowledge to conduct system performance checks in accordance with the applicable process standard. \n, • Detect and identify indications affecting quality and safety factors such as cracks, inclusions, cavities, undercuts, incomplete fusion and porosity, etc. \n, • Determine and disposition (accept or reject) items based on NDT results. \n, • Record test results, findings and dispositions manually or with the aid of a computer or computer based system. \n, • Coordinate recurring defects with concerned with supervisor and quality engineer personnel, and if required recommend corrective action measures. \n, • Test and pass NAS 410 Level II certification in house. \n, • Able to pass vision test requirements. \n\n Qualifications: \n • High School Diploma or GED. \n, • A minimum of 800 hours experience in industrial X-ray experience inspecting aerospace components. \n, • Previously certification as an X-ray Level 2 to specification ASNT or NAS410. \n, • Have a basic knowledge of product manufacturing and inspection technology. \n, • Computer experience to include accessing on-line documents and information, working within the company business systems and Microsoft office. \n\n Preferred Additional Skills: \n • Experience in other NDT methods such as Fluorescent penetrant Inspection \n, • Experience in digital Industrial X-ray also preferred but not required. \n, • Proficiency using precision measuring tools. \n, • Knowledge and experience of aerospace manufacturing processes and materials. \n, • Good communication skills, and the ability to work in a team environment. \n, • Strong problem solving and ability to create manual approaches to measuring. \n, • When required, ability to work in a fast pace environment to meet deadlines. \n\n In compliance with pay transparency requirements, the salary range for this role in the state of New Jersey is $18.50/hr - $59.13/hr. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. #LI-JC4 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .

At BrandSafway, we know our employees are our greatest asset, which is why we give them the tools, training, and resources to be successful. Come join our growing team! Job Summary The Elevator Hoist Foreman is responsible for overseeing all construction hoist operations on active job sites, including installation, operation, maintenance, and dismantling. This role leads hoist crews, ensures compliance with safety regulations and NYC DOB requirements, and coordinates closely with project teams to maintain efficient workflow, productivity, and high safety standards. The Foreman also monitors manpower, manages documentation, and provides hands-on support as needed to ensure successful project execution. Key Responsibilities \n • Communicate effectively with customers, co-workers, and management to understand project needs, scope, sequencing, and schedules.\n, • Coordinate with the General Foreman and project teams to ensure alignment on hoist-related activities.\n, • Maintain a safe and compliant job site by enforcing OSHA, NYC DOB, and manufacturer safety standards for hoist operations.\n, • Oversee all aspects of hoist systems, including installation, climbing, tie-ins, operation, maintenance, troubleshooting, and dismantling.\n, • Supervise hoist operators, mechanics, and labor crews, and coordinate hoist usage with other trades to prevent delays and conflicts.\n, • Monitor manpower, productivity, and work schedules to ensure efficiency, cost control, and minimal overtime.\n, • Perform and ensure proper documentation of daily inspections, testing, and maintenance in compliance with regulatory requirements.\n, • Complete administrative duties including safety meetings, hazard analyses, fall protection plans, payroll, inventory tracking, equipment logs, change orders, and job documentation.\n, • Review pre-job plans, hoist layouts, and engineering drawings to ensure accurate installation and execution.\n, • Identify and document out-of-scope work to support change order processing and cost recovery.\n, • Troubleshoot mechanical and operational issues to minimize downtime and maintain workflow.\n, • Perform hands-on work as needed to support installation, adjustments, repairs, and system modifications.\n\n Qualifications \n • Minimum 5 years of hands-on experience with construction hoists in commercial or high-rise environments.\n, • Minimum 3 years of supervisory experience managing hoist crews or similar teams.\n, • Strong understanding of rack-and-pinion and cable-driven hoist systems.\n, • Ability to read and interpret blueprints, hoist layout drawings, and engineering specifications.\n, • Experience performing and documenting required hoist inspections.\n, • Familiarity with jobsite reporting tools for timekeeping, safety documentation, and inventory tracking.\n, • Strong communication and coordination skills across trades, field teams, and management.\n, • Proven leadership ability, including training, mentoring, and enforcing safety and performance standards.\n, • Physically capable of working at heights, in confined spaces, and in varying weather conditions.\n, • Bilingual (English/Spanish) preferred but not required.\n, • Valid driver's license with clean driving record and ability to travel between job sites.\n, • OSHA 30-Hour Construction Safety Certification required.\n, • NYC SST (62-Hour) Card required per Local Law 196.\n, • OSHA Hoist Competent Person designation (or willingness to obtain within 30 days).\n, • Knowledge of NYC DOB Chapter 33 and New York State Labor Law (§240 & §241).\n, • First Aid/CPR certification preferred.\n, • Thorough knowledge of OSHA, ANSI, manufacturer standards, and local regulations related to construction hoists.\n\n BrandSafway offers a competitive benefits package that includes medical, dental, vision, life and disability insurance along with a generous 401k plan. About Us: BrandSafway is a leading global provider of access, specialized services, and forming and shoring solutions to the industrial, commercial and infrastructure markets. Through a network of ~340 strategic locations across 25 countries and ~40,000 employees, BrandSafway delivers a full range of industrial service solutions. BrandSafway supports maintenance and refurbishment projects as well as new construction and expansion plans with unmatched service from expert local labor and management. Today's BrandSafway is At Work For You® - leveraging innovation and economies of scale to increase safety and productivity, while remaining nimble and responsive. BrandSafway, including its subsidiaries, is an equal opportunity employer and does not discriminate on the basis of race, creed, color, national origin, religion, gender, marital status, sexual orientation, age, disability, special disabled or veteran status. Notice to all potential job candidates: Please be advised that BrandSafway will never require or ask for any fee from you in exchange for being considered, hired, promoted, transferred or having ongoing employment with us. It is a violation of our Code of Conduct if any employee requests any money or fee from you in exchange for tentatively special treatment or consideration. If anyone, regardless of whether an existing employee, or anyone else, requests payment of any fee in exchange for being hired into our company, you may confidentially contact our HR Compliance department at [email protected] and provide the name of the individual and any other documentation or proof of such an act. #LI-SW1

Description At IPS, we're all about exceptional service and exceptional people. We're looking for a passionate In-Shop Technician who loves hands-on work, takes pride in their craft, and wants to have a meaningful impact. As an In-Shop Technician, every day will be different. You'll get to apply your knowledge and skills to solve complex problems and help critical industries keep their equipment running. As a company, we prioritize safety in everything we do and offer opportunities for growth, job longevity, and continuous improvement. If you're looking for a role that values your skills and dedication, IPS is where you'll thrive. Responsibilities & Expectations: The Submersible Pump Mechanic is responsible for the inspection, disassembly, diagnosis, repair, rebuilding, testing, installation support, and maintenance of submersible pumps and related rotating equipment used in municipal, industrial, wastewater, stormwater, mining, and commercial applications. This role requires strong mechanical aptitude, troubleshooting skills, and knowledge of pump systems, motors, seals, bearings, hydraulics, and electrical/mechanical components. Pump Repair & Rebuild • Disassemble, inspect, troubleshoot, and repair submersible pumps and associated equipment, • Diagnose failures involving bearings, seals, impellers, shafts, wear rings, cables, and motors, • Rebuild pumps to OEM specifications and quality standards, • Perform precision measurements using micrometers, calipers, dial indicators, and alignment tools, • Replace mechanical seals, bearings, gaskets, O-rings, and electrical components, • Conduct shaft inspections, impeller clearance checks, and hydraulic evaluations Testing & Quality Control • Perform electrical and mechanical testing of repaired equipment, • Conduct insulation resistance and continuity testing using megohmmeters and multimeters, • Operate test tanks and verify pump performance, vibration, amperage, and rotation, • Complete repair reports, inspection documentation, and testing records, • Ensure repairs meet safety, quality, and customer standards Field Service Support • Assist with installation, removal, startup, and troubleshooting of pumps in the field, • Support confined space and wastewater lift station service activities when required, • Interface with customers to explain repair findings and recommendations, • Participate in emergency breakdown response and after-hours service calls as needed Shop Operations • Maintain clean, organized, and safe work areas, • Operate forklifts, cranes, hoists, pressure washers, and shop equipment safely, • Follow lockout/tagout (LOTO), confined space, and all safety procedures, • Assist with inventory management, parts identification, and material handling Qualifications and Competencies: • High school diploma or GED required, • 3+ years of experience repairing pumps, motors, rotating equipment, or industrial machinery, • Ability to read blueprints, repair manuals, and technical drawings, • Strong mechanical troubleshooting and problem-solving skills, • Familiarity with hand tools, power tools, precision measuring equipment, and lifting equipment, • Ability to lift 50-75 lbs and work safely in industrial environments You'll thrive at IPS if you... • Lead with integrity and prioritize safety. You demonstrate high standards and commit to a safe, ethical workplace., • Value teamwork and accountability. You work well with others, take responsibility, serve others, and deliver on your commitments., • Focus on the customer. You are dedicated to providing an unmatched customer experience and exceeding expectations., • Have an entrepreneurial spirit. You're proactive, innovative, and thrive in a fast-paced environment., • Communicate effectively and with purpose. You keep everyone informed with clear, concise communication., • Stay curious and love to learn. You continuously seek new knowledge and grow personally and professionally. Who We Are: At Integrated Power Services (IPS), we're committed to empowering you to make a meaningful impact. As the industry's leading and fastest-growing service provider, IPS offers single-source electromechanical and power management solutions to enhance the reliability of critical infrastructure across North America and the United Kingdom. We serve over 30,000 essential customer locations, from renewable energy pioneers to hospitals, manufacturers, and municipalities, helping them avoid costly downtime and ensure mission-critical operations. When you join IPS, you're joining a team that's revolutionizing equipment and process reliability across diverse sectors, from power generation to petrochemicals, and beyond. You'll learn from industry experts, grow alongside a talented workforce, and be part of a company that is built on the Shared Values of Safety, Integrity, Teamwork, Accountability, Customer Focus, and Entrepreneurial Spirit. Pay Rate Details: $40.00 - $60.00 per hour Benefits: \n • Paid Time Off (PTO)\n, • 401k Employer Match\n, • Bonus Incentives \n, • Tuition Reimbursement Program \n, • Medical, Dental and Vision plans\n, • Employee Assistance Program (EAP) \n, • And more!\n\n IPS is committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, or veteran status. Any offer of employment is contingent upon the successful completion of a background and driving record investigation. As a federal contractor, our company is committed to maintaining a safe and drug-free workplace. Candidates for this position are required to complete a pre-employment drug screen successfully. The drug screening process will include testing for substances that may impair one's ability to perform the job safely and effectively. #LI-JR1

Job DescriptionRole Overview: The Blue Seal Boiler Operator is responsible for the safe operation, monitoring, maintenance, and troubleshooting of high-pressure boiler systems and plant utilities that support manufacturing operations. This role plays a critical part in ensuring equipment reliability, utility system performance, and regulatory compliance throughout the facility. This is a highly hands-on position requiring strong industrial experience, mechanical aptitude, and the ability to independently identify and resolve equipment issues. The ideal candidate will have extensive experience operating high-pressure boiler systems while supporting utilities and equipment within a corrugated packaging, paper manufacturing, converting, or similar industrial production environment. Job Requirements: • Valid New Jersey Blue Seal High-Pressure Boiler Operator License required., • Minimum of 5+ years of experience operating and maintaining high-pressure boiler systems in an industrial manufacturing environment., • Experience supporting boiler and utility operations within a corrugated packaging, paper manufacturing, converting, or similar industrial production environment is required., • Strong knowledge of steam systems, boiler operations, water treatment, condensate systems, and plant utilities., • Hands-on experience troubleshooting and performing preventive maintenance on boiler systems, utility equipment, and related mechanical systems., • Strong mechanical aptitude with the ability to diagnose and resolve equipment issues independently., • Strong understanding of industrial safety regulations, lockout/tagout procedures, and compliance requirements., • Experience supporting manufacturing operations and working closely with maintenance and production teams., • Strong communication, organizational, and problem-solving skills., • Ability to work overtime and support operational needs as required.Personal Attributes / Skills:, • Strong hands-on approach with the ability to work independently., • High attention to detail and commitment to safety and compliance., • Strong troubleshooting and mechanical problem-solving abilities., • Ability to prioritize multiple responsibilities in a fast-paced manufacturing environment., • Dependable, self-motivated, and accountable., • Team-oriented with effective communication skills across departments.Physical Requirements:, • Frequent standing, walking, climbing, bending, and movement throughout the facility., • Lift and carry up to 50 lbs. as required., • Exposure to industrial machinery, steam systems, elevated mechanical areas, and varying temperatures., • Work safely at heights and access elevated equipment using ladders when necessary., • Active participation in a fast-paced manufacturing environment.Key Responsibilities:, • Operate high-pressure boiler systems: Monitor, maintain, and optimize boiler performance to support plant operations., • Monitor plant utilities: Support the operation of steam, condensate, water treatment, and related utility systems., • Perform preventive maintenance: Conduct inspections, maintenance activities, and operational checks to maximize equipment reliability., • Troubleshoot equipment issues: Diagnose and resolve boiler, utility, and mechanical system problems to minimize downtime., • Maintain safety compliance: Follow all safety procedures, lockout/tagout requirements, and regulatory standards., • Support manufacturing operations: Work closely with maintenance and production teams to ensure continuous plant support., • Maintain operational records: Complete logs, inspections, maintenance reports, and compliance documentation accurately., • Assist with equipment repairs and upgrades: Support maintenance projects and continuous improvement initiatives., • Respond to operational issues: Address utility and equipment concerns quickly to maintain safe and efficient operations., • Perform other job-related duties as assigned. GRIT Staffing & HR Solutions is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees and applicants. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. If you require a reasonable accommodation during the application or interview process, please contact us at eoc@gritstaffinghr.com so we can assist you.

Job Description Job Title: Warehouse Worker Job Summary: We are seeking a dependable and detail-oriented Warehouse Worker to support daily warehouse operations. The Warehouse Worker will be responsible for receiving, storing, picking, packing, and shipping products while maintaining accurate inventory records and a safe, organized work environment. This role is ideal for someone who thrives in a fast-paced, team-oriented setting. Key Responsibilities: • Receive, inspect, and store incoming materials and products, • Pick, pack, and prepare orders for shipment according to company standards, • Accurately track inventory using RF scanners or warehouse management systems, • Load and unload trucks using pallet jacks, hand trucks, or forklifts, • Maintain cleanliness and organization of warehouse areas, • Follow all safety guidelines and company procedures, • Assist with cycle counts, inventory audits, and general warehouse projects as neededQualifications:, • Previous warehouse, distribution, or production experience preferred, • Basic math and computer skillsJob Type & Location This is a Permanent position based out of Upper Saddle River, NJ. Pay and Benefits The pay range for this position is $17.00 - $18.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Upper Saddle River,NJ. Application Deadline This position is anticipated to close on Jun 5, 2026. About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionRole Overview: The Forklift Mechanic is responsible for performing routine, emergency, and preventive maintenance on all types of forklifts, including electric, LP gas, gas, and diesel models. This role requires diagnosing and repairing mechanical, electrical, hydraulic, and brake systems to ensure safe and reliable operation of forklift equipment. The technician will interpret technical manuals, replace defective components, maintain a clean and organized workspace, and uphold all safety standards. This role requires flexibility to travel between both locations as needed. Job Requirement: • Perform routine, emergency, and preventative maintenance of forklifts., • Interpret manufacturer technical manuals and service bulletins to perform required maintenance and repairs., • Diagnose and troubleshoot mechanical issues related to brakes, hydraulics, electrical systems, mast assemblies, and attachments., • Able to travel between locations, • Replace or repair defective parts using stock or ordered components., • Reassemble forklift components and ensure proper and safe operation., • Conduct safety inspections prior to returning equipment to service., • Maintain accurate service records, logs, and documentation of preventative maintenance tasks., • Clean and maintain equipment and the surrounding work area., • Ensure compliance with all company safety regulations and OSHA requirements., • Stay up to date with evolving technologies and maintenance techniques., • Perform other maintenance-related duties as assigned., • Frequent standing, lifting, and moving throughout the shiftQualifications:, • Minimum of 2 years of hands-on experience in forklift maintenance or a related mechanical/technical field., • Certification to operate forklifts and electric pallet jacks, • Experience with brands such as Hyster, Cat, or Mitsubishi forklifts (up to 12,000 lbs. capacity)., • Working knowledge of brake systems, must components, tire/wheel changes, and hydraulic systems., • Ability to diagnose and service electric, LP, gas, and diesel forklift systems., • Strong mechanical aptitude and troubleshooting skills., • Valid driver's license., • Ability to pass a pre-employment drug screen., • Must be safety-conscious and able to follow all safety policies and procedures., • Experience in manufacturing, automotive, military, or trade school training., • Familiarity with industrial electrical systems (up to 440 volts)., • Knowledge of FIFO, GMP, and food safety protocols GRIT Staffing & HR Solutions is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees and applicants. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. If you require a reasonable accommodation during the application or interview process, please contact us at eoc@gritstaffinghr.com, and we will assist you.

Job Description We are seeking a reliable and safety-focused Battery Technician to install, maintain, troubleshoot, and replace batteries and power systems for commercial, industrial, and field-based applications. The ideal candidate has experience working with electrical systems, battery testing equipment, hand tools, and preventative maintenance procedures. Anyone with previous experience in Battery Maintenance are welcome to apply. Those with Military, Naval and/or Air Force backgrounds are welcome to apply. Some overnight travel required. Company DescriptionTron Management is a leading contractor in data center, battery installation, sales, install and preventative maintenance.Tron Management is a leading contractor in data center, battery installation, sales, install and preventative maintenance.