Osha safety jobs in New Brunswick, New JerseyCreate job alerts

Job Description Job Description Date 4/2023 Location 1300 Airport Road, North Brunswick NJ Title Associate, Manufacturing Department Standard Manufacturing Reports to Production, Supervisor FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Manufacturing Associate is responsible for the operation and set up of one (1) machine under the guidance of a seasoned operator. The position includes assisting with the setup, operation, cleaning, moving supplies and finish products and preventative maintenance of all related equipment. The Associate is accountable for overall performance including safety, quality, shrink, attainment, and production efficiency. Areas of Responsibility • Ensure full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed to ensure product specifications and tolerances are met in compliance with company standards and regulatory requirements., • Ensure that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Complete all labeling and inventory movements to ensure accurate inventory control., • Dismantle and clean any accessories and equipment while also maintaining a clean work area., • Perform all material handling of products and components., • Correct document errors as needed on batch record., • Maintain proper gowning and hygiene to ensure integrity of the product as per company policies., • Work extended hours and occasional weekend overtime., • Works in a safe and responsible manner to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements. Education & Qualification: • High school graduate or GED equivalent., • No prior experience required., • Operates one (1) machine under guidance of a seasoned operator. Certifications, Licenses, Credentials: • Able to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Mechanically inclined to understand inner workings of equipment., • Able to lift up to 50 lbs.; occasionally lift and move up to 75 lbs., • Stand and walk on the production floor for a minimum of 6 hours per shift., • Use hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. 1st shift: 7:00 AM - 3:30 PM Pay Rate: $17.00 2nd shift: 3:15 PM - 11:45 PM Pay Rate: $18.00 3rd shift: 11:00 PM - 7:30 AM Pay Rate: $19.00

Job Description Exciting opportunity for a growing forklift company for a Class A CDL Truck Driver. We are seeking someone who is mechanically inclined, has great people skills, and a desire for something more! If you can work with your hands, like to deal directly with the customer, and take pride in your work - you just might have what it takes to be successful as a Truck Driver. This job will allow you to grow with our business and work directly with ownership in a fast-paced environment. We are seeking Truck Driver who can problem solve and think independently while completing tasks accurately and efficiently. Rate is negotiable depending on experience. This is a union position. Benefits: 7:30 a.m to 4:00 p.m. shop hours • Eligibility for overtime with management approval, • Vacation/Sick Time as per Union Standards, • Paid holidays after six months of employment, • Optional Medical & Dental Benefits – available after 90 days of employment, • Optional 401(k) plan – quarterly based enrollment, • Membership in Union Shop – International Association of Machinists and Aerospace Workers – Probationary period of 90 days from the start date. Initiation fee of $500., • Union Pension Plan – includes an additional $3.00 per hour towards the pension for hours worked., • Work independently to transport needed equipment to and from customer locations with a commercial truck., • Safely and properly unload and load forklifts and related items form the truck as required, • Drive vehicles to deliver and pick up forklifts/aerial lifts as needed, • Stock and assist with moving of forklifts and equipment, • Maintain tools, equipment, and delivery truck in efficient operating condition, keep clean (inside & out), • Lift a minimum of fifty-five (55) pounds, • Ability to maintain and follow written documents as instructed, • Ability to location customer's location and use GPS to follow, • Ability to operate forklifts, • Safely operate a heavy or tractor-trailer truck (manual trucks), • Load and unload cargo/forklifts leveraging chains, straps and binders, • Properly track and document activity log, • Report any issues or incidents to dispatch, • Inspect truck before and after a trip, • Previous experience in truck driving or other related fields, • High School diploma or general education degree (GED), • Must meet and maintain C&C Lift Truck's qualifications for Commercial Drivers, • Commercial driver's license, • OSHA certified in forklift safety is a plus, • Self-starter and can work independently, • Great organizational and multi-tasking skills, • Ability to handle physical workload, • Strong work ethic We are an equal opportunity employer. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.

Job Description Parksite is looking or a CDL Class A Truck Driver to join our team! The driver will haul building materials in our 48' flatbed truck. Routes downloaded daily with turn by turn directions by PeopleNet, no need to do any route planning! Electronic logging and DVIR completed by PeopleNet. This driver is expected to work as a valued member of the delivery team. The job primarily consists of local vehicle operations involving positioning and moving trucks and trailers at Parksite and customer locations to effect loading and unloading. Job Duties/Responsibilities: • Operate company owned and leased trucks over 4 tons to facilitate shipping and receiving operations., • Operate trucks for the delivery, pickup and relocation of building products and materials., • Perform required before, during and after operation user maintenance and provide required reports., • Provide outstanding customer service during delivery and pickup operations., • Operate all Material Handling Equipment., • Maintain all required certifications required by DOT and OSHA and company safety programs., • Maintain and protect all property entrusted to you in excellent condition., • Perform any other tasks assigned to support and improve the overall team operations. Job Requirements: • CDL Class A license., • Experience operating Material Handling Equipment., • Ability to operate and maintain equipment in a safe manner at all times., • Ability to make overnight runs as required by shipping needs., • One or more years experience as truck driver., • Must be able to learn to operate all Material Handling Equipment used by the company., • Requires prolonged sitting, driving and Material Handling Equipment operations., • Must be able to lift 50 lbs repeatedly., • Must be able to work in severe weather conditions; both heat and cold. Benefits: • 401(k) Program., • Company Paid Life Insurance., • Daily dress code of "business casual", • Health, Dental and Flexible Spending Insurance Plans., • A positive work environment with all team players., • A stake in your company with our Employee Stock Ownership Plan (ESOP). About Us: Parksite is a sales, marketing and distribution company serving many segments of the building industry, with a focus on both interior and exterior products. We are proud to supply the best Fabricators and Building Material dealers with category leading products for the residential, commercial and remodeling markets. Focusing on superior products and exceptional service, Parksite's unique marketplace niche is through education. We begin by identifying products with distinctive applications and specifically educate and emphasize the value of these products directly to architects, builders and designers. With this approach, we have become a leader in the industry with each of the products we sell. We combine marketing expertise and industry knowledge to create demand for our supplier business partners. We help build brands.

Job DescriptionDescription: As a Driver at Lewis Environmental, you will be a critical part of our team, responsible for driving commercial vehicles to support a variety of Environmental Services projects. Your role will include transporting hazardous and non-hazardous materials, responding to environmental emergencies, and ensuring the safe and efficient operation of all vehicles. This position offers the opportunity to make a significant impact by ensuring safety and compliance in our day-to-day operations and emergency response efforts. Requirements: Key Responsibilities Vehicle Operation: Safely drive commercial vehicles to support a wide range of environmental services projects. Compliance: Maintain all DOT and OSHA certifications required for operating a CDL truck, including transporting hazardous and non-hazardous materials. Safety: Follow all company safety rules and OSHA regulations. Attend required safety training programs to ensure a safe working environment. Emergency Response: Participate as a member of the On-Call Emergency Response Team, responding to environmental spills and other emergencies. Vehicle Maintenance: Perform pre- and post-trip vehicle inspections and ensure all equipment is maintained in excellent working condition. Regulatory Adherence: Ensure compliance with all regulations regarding the transportation of hazardous and non-hazardous waste. Team Collaboration: Perform Service Technician duties as part of our team-based operations philosophy, assisting in the completion of various environmental tasks. Qualifications Experience: Minimum 2 years of experience as a CDL driver, preferably with hazardous material handling experience. Licensing: Valid CDL license with Hazmat and Tanker endorsements required. Motor Vehicle Record: Clean Motor Vehicle Record (MVR) and successful completion of a criminal background check, including an acceptable FMCSA record. Safety & Compliance: Strong commitment to safety, quality, and compliance with all industry regulations. Training: 40 hours of OSHA and related safety training is a plus, though training will be provided. Availability: Willingness to work flexible hours, including being on call during weekends and after hours. Physical Requirements Vehicle Operation: Ability to sit for extended periods while operating a motor vehicle. Manual Labor: Ability to lift up to 60 lbs. and perform manual labor tasks as part of daily duties. Weather Conditions: Ability to work in severe weather conditions, both hot and cold. Confined Spaces & Safety Gear: Ability to work in confined spaces and wear a respirator as needed. Clean shaven requirements for respirator use. Physical Effort: Ability to stand and exert physical effort performing manual labor 50-70% of the time. Noise Exposure: Able to tolerate exposure to moderate noise levels. Why Join Us? At Lewis Environmental, we are dedicated to fostering a supportive and inclusive environment where safety, teamwork, and professional development are prioritized. We offer opportunities for growth and provide comprehensive training and support to ensure that our team members succeed and thrive. Equal Opportunity Employer Lewis Environmental is an Equal Opportunity Employer and is committed to building a diverse workforce. We do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. All qualified applicants will receive consideration for employment without regard to any protected characteristic.

Job Description Job Description Date 06/2025 Location 1300 Airport Road, North Brunswick NJ Title Operator, Granulation/ Blending Department Standard Manufacturing Reports to Production, Supervisor FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Granulation/Blending Operator is responsible for the operation and set up of granulators, drying oven, blenders, screening equipment etc. in accordance with company standard operating procedures. The position includes set up, operation, cleaning, and preventative maintenance of all related equipment. The Operator is accountable for overall performance including safety, quality, shrink, attainment, and production efficiency. Operators must be capable of operating multiple like machines at one time and learning to operate a variety of equipment within the manufacturing area. Areas of Responsibility • Follow batch records, SOP’s, and cGMP's guidelines to ensure product specifications and tolerances are met., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Complete all labeling and inventory movements to ensure accurate inventory control., • Dismantle and clean any accessories and equipment while also maintaining a clean work area., • Train in the operation, cleaning and set-up of the following pieces of equipment as well as new equipment:, • Rapid Mixer Granulator: 100L & 600L and planetary mixer, • Fluid bed dryer/processor, • Tray Drying Ovens, • Fitz mill/Multi mill, • Double cone/V- blenders: 6cu. ft. to 150 cu. ft., • Screening/ sieving equipment, • Fill in appropriate logbooks for equipment and rooms., • Perform all material handling of products and components., • Correctly document all steps on batch record., • Participate in any investigation for a deviation involving a batch record., • Maintain proper gowning and hygiene to ensure integrity of the product as per company policies., • Works extended hours and occasional weekend overtime. Education & Qualification: Level 1 Pay Rate $19.00 - $22.00 • High school graduate or GED equivalent, • 3+ years Granulating/Blending Operator experience, • Minimum of one (1) year work experience in nutritionals, supplements, food, or pharmaceutical manufacturing industries, • 6-12 months experience, • Operates blending, screening & milling machines., • High school graduate or GED equivalent, • 3+ years Granulating/Blending Operator experience, • Minimum of one (1) year work experience in nutritionals, supplements, food, or pharmaceutical manufacturing industries, • 1 years of experience, • Operates 5 machines (blending, milling, sifting, tray dryer and granulation)., • A clear understanding of the principal functions of the blending /granulation department. Certified forklift operator., • High school graduate or GED equivalent, • 3+ years of experience, • Operate all machines., • Must be highly skilled in the proper set up an operation of blenders and granulators., • N/A Skills & Ability • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards etc., • Mechanically inclined to understand the inner workings of equipment., • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift., • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Must be able to wear all PPE including a lab coat, face mask, booties, gloves, safety glasses/goggles, and respirators. Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 3Rd shift - 11:00 pm to 7:30 am

Job Description Job Description Date 06/2025 Location 1300 Airport Road, North Brunswick NJ Title Operator, Compression & Encapsulation Department Standard Manufacturing Reports to Production Supervisor FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Compression and Encapsulation Operator is responsible for the operation and set-up of tablet compression machines and set-up of automatic capsule filling machine in accordance with company standard operating procedures (SOPs) and cGMP regulations to ensure products meet applicable quality standards. This position includes set-up, operation, cleaning, and light mechanical adjustments. The Operator is accountable for overall production line performance including safety, quality, shrink, attainment, and line efficiency. Operators must be capable of operating multiple like machines at one time and learning to operate a variety of equipment within the manufacturing area. Areas of Responsibility Level 1 • Makes necessary machine adjustments to ensure the smooth operation of the lines for required quality and quantity., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Utilizes problem-solving skills to identify and report to the team lead or supervisor troubleshoot product issues., • Disassembles, cleans/ sanitizes, and reassembles all required equipment., • Meets all safety expectations and follows all safety practices., • Maintains proper gowning and hygiene to ensure integrity of the product as per cGMP’s and company policies., • Must be able to work extended work hours and weekend overtime., • Makes necessary machine adjustments to ensure the smooth operation of the lines for required quality and quantity., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Utilizes problem-solving skills to investigate and troubleshoot product issues and recommend solutions for: 1. tableting issues such as sticking and picking, capping, chipping, compressibility, delamination, disintegration, and black spots on surface, 2. general issues such as machine set-up, machine performance, and documentation. • Cross-trains in other areas to be able to support the manufacturing process as needed., • Disassembles, cleans/ sanitizes, and reassembles all required equipment., • Meets all safety expectations and follows all safety practices., • Maintains proper gowning and hygiene to ensure integrity of the product as per cGMP’s and company policies., • Must be able to work extended work hours and weekend overtime., • Makes necessary machine adjustments to ensure the smooth operation of the lines for required quality and quantity., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Assists supervisor in completion of deviation reports that outline both short- and long-term corrective action steps., • Utilizes problem-solving skills to investigate and troubleshoot product issues and recommend solutions for: 1. tableting issues such as sticking and picking, capping, chipping, compressibility, delamination, disintegration, and black spots on surface, 2. general issues such as machine set-up, machine performance, and documentation. • Performs basic and routine maintenance activities., • Cross-trains in other areas to be able to support the manufacturing process as needed., • Disassembles, cleans/ sanitizes, and reassembles all required equipment., • Meets all safety expectations and follows all safety practices., • Maintains proper gowning and hygiene to ensure integrity of the product as per cGMP’s and company policies., • Must be able to work extended work hours and weekend overtime., • Works in a safe and responsible manner to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements. Education & Qualification: Level 1 Pay Rate $19.00 - $23.00 • High school graduate or GED equivalent, • High school graduate or GED equivalent, • High school graduate or GED equivalent, • 5+ years of experience, • Operate all machines., • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely to detail and accuracy with numbers., • Understands and is knowledgeable of cGMP, OSHA standards etc., • Mechanically inclined to understand inner workings of equipment., • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 2nd shift: 3:00 PM - 11:30 PM

Job Description Required Skills: • Three (3) year related experience and/or training or equivalent combination of education and experience operating industrial machinery is preferred, but will train if necessary, • Must be able to read and interpret blueprints, write and follow written and verbal instructions., • Possess basic computer skills, • Experience using hand-measurement tools is preferred, • Experience operating CNC machines is preferred, • Accurately read a tape line, • High School diploma/GED required Responsibilities and Duties: • Operation of a CNC machine, • Follow safe operating and lifting procedures for overhead cranes, • Operate forklifts according to safe operating procedures, • Bring in and remove various sizes, thickness and shapes of steel parts., • Maintains safe operations of all machines by adhering to company and OSHA safety policies and procedures., • Maintains equipment by completing preventative maintenance requirements, • Monitor the machine to ensure that it is running at maximum performance, • Detect and report all machine malfunctions, • Documents actions by completing production and quality logs, • Adjust machine as needed, • Other duties as assigned Physical Requirements: • Must be able to constantly work in various indoor and outdoor conditions including hot and cold temperatures, dust and noisy conditions., • Must be able to lift a maximum weight up to 20 lbs. frequently; 50 lbs. occasionally., • Must be able to carry a maximum weight up to 20 lbs. frequently; 50 lbs. occasionally., • Frequent standing, walking, reaching forward, balancing, feeling, object handling, simple hand grasping, firm hand grasping, and operating controls will be required., • Regular sitting, climbing stairs and ladders, reaching overhead, stooping, and crouching will be required., • Must be able to properly wear all required Personal Protective Equipment. Benefits: • Medical, Dental and Vision Insurance, • Company Provided Life Insurance, • Matching 401 K, • Productivity Bonus

Job Description Job Description Date 10/2025 Location 22 Van Dyke Avenue, New Brunswick NJ 08901 / 1300 Airport Road, North Brunswick NJ 08902 Title Operator, Dispensing Department Dispensing Reports to Manager, Dispensing FLSA (Exempt or Non-Exempt) Non-Exempt Role Overview The Dispensing Operator will perform all functions related to dispensing of material, receipt of goods, put-away material into warehouse aisles, pull out material per Batch card/Pick ticket, put back to same location from where it was pulled for batches, manual order processing, order auditing, shipment preparation, pallet building, transferring material from wood to plastic pallets, and cycle counting inventory. All functions may require the use of powered industrial trucks, Syspro or RF as needed. Will need to work in temperature-controlled areas. Areas of Responsibility Level 1: Dispensing Operator Overview: This is a training-level role for individuals with limited or no prior experience in pharmaceutical dispensing. Works under close supervision while learning company SOPs, GMP standards, and equipment operations. Key Responsibilities: • Assist in pulling and weighing raw materials under supervision., • Learn to read and interpret batch cards and pick slips., • Calibrate scales before use., • Cleans room after batch is complete, • Ensures safety and quality standards are consistently followed., • Maintain basic cleanliness of work area and equipment., • Support warehouse duties such as material receipt and basic inventory handling., • Follow safety procedures and learn PPE protocols., • Operate pallet jacks or assist with forklift activities (if certified). Level 2: Dispensing Operator Overview: This level is for operators with hands-on experience in pharmaceutical or supplement dispensing. Operators are responsible for completing batch-related activities with minimal supervision and maintaining documentation compliance. Key Responsibilities: • Dispense raw materials independently per batch cards., • Reviews batch card. Determine material to be used in the batch. Pull out material per requirement and enter in logbooks., • Performs requests received from other departments such as R&D, Production, QA or Purchasing etc., • Cleans room after batch is complete, • Ensures safety and quality standards are consistently followed., • Weigh materials accurately and calibrate scales before use., • Use Syspro or RF systems for inventory control., • Handle, put-away, return, and transfer of goods between warehouse locations., • Perform manual order processing, auditing, and preparation for shipments., • Maintain gowning and hygiene protocols in controlled environments., • Ensure accurate documentation in logs and batch records. Level 3: Dispensing Operator Overview: A highly experienced operator who may act as a team lead or trainer. Oversees batch dispensing activities, ensures compliance, and supports continuous improvement initiatives. Key Responsibilities: • Lead batch dispensing operations; verify materials and documentation., • Train and mentor entry and intermediate-level operators., • Collaborate with cross-functional teams (QA, R&D, Production)., • Reviews batch card. Determine material to be used in the batch. Pull out material per requirement and enter in logbooks., • Performs requests received from other departments such as R&D, Production, QA or Purchasing etc., • Cleans room after batch is complete, • Ensures safety and quality standards are consistently followed., • Conduct cycle counts and helps manage inventory accuracy., • Troubleshoot equipment or material issues; escalate when necessary., • Lead compliance audits for dispensing areas., • Support continuous improvement, safety, and 5S initiatives. Physical & Environmental Requirements (All Levels): • Able to lift 55 lbs regularly; occasionally up to 75 lbs., • Stand/walk for 6+ hours per shift., • Work in temperature-controlled rooms with PPE (lab coat, gloves, face mask, respirator, etc.). Requirements Education & Qualification: Level 1: Dispensing Operator • High school diploma or GED., • 0–1 year of experience in manufacturing or warehouse setting., • Basic math and English reading skills., • Willingness to learn cGMP, OSHA, and SOPs. Level 2: Dispensing Operator • High school diploma or GED., • 2+ years of experience in a pharmaceutical production environment., • Forklift operation experience (certification preferred)., • Familiarity with cGMP and SOP documentation standards., • Attention to detail and ability to troubleshoot basic dispensing issues. Level 3: Dispensing Operator Requirements: • High school diploma or GED; technical certification a plus., • 4+ years of dispensing experience in a GMP-regulated and within a pharmaceutical production environment, • Strong understanding of regulatory compliance (FDA, GMP, OSHA)., • Proven ability to lead teams and communicate effectively., • Proficient in inventory software (Syspro or similar ERP systems)., • Additional experience in granulation, compression, or blending is a strong plus. Certifications, Licenses, Credentials: • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards, etc., • Mechanically inclined to understand the inner workings of the equipment., • Demonstrates the ability to read and write basic English to be able to understand the industry-regulated instruction sheets., • Ability to lift up to 55 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Must be able to wear all PPE including a lab coat, face mask, booties, gloves, safety glasses/goggles, and respirators. Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment

Job Description Job Description Date 11/2020 Location 1300 Airport Road, North Brunswick NJ Title Production Operator Department Standard Manufacturing - Beads Reports to Production Supervisor FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Beads Operator is responsible for the operation and set up of mills, granulators, drying oven, blenders, screening equipment, fluid bed dryers, feeders, etc. in accordance with company standard operating procedures. The position includes set up, operation, cleaning, and preventative maintenance of all related equipment. The Operator is accountable for overall performance including safety, quality, shrink, attainment, and production efficiency. Operators must be capable of operating multiple like machines at one time and learning to operate a variety of equipment within the manufacturing area. Areas of Responsibility • Follows batch records, SOP’s, and cGMP's guidelines to ensure product specifications and tolerances are met., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Completes all labeling and inventory movements to ensure accurate inventory control., • Dismantles and cleans any accessories and equipment while also maintaining a clean work area., • Trains in the operation, cleaning and set-up of the following pieces of equipment as well as new equipment:, • Vector Fluid Bed Dryer, inserts, and ancillary equipment, • K-Tron powder feeder, • Air Classifying Mill, • Fitz mill/Multi mill, • Double cone/V- blenders: 6cu. ft. to 150 cu. ft., • Screens/ sieves equipment, • Fills in appropriate logbooks for equipment and rooms., • Performs all material handling of products and components., • Correctly document all steps on batch record., • Participates in any investigation for a deviation involving a batch record., • Maintains proper gowning and hygiene to ensure integrity of the product as per company policies., • Works extended hours and occasional weekend overtime., • Works in a safe and responsible manner to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements. Education & Qualification: • High school graduate or GED equivalent, • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards, etc., • Mechanically inclined to understand the inner workings of the equipment. Level 1 Pay Rate: $19.00 - $23.00 • 1-2 years experience, • Operates fluid bed dryer, blending, screening & milling machines. Pay Rate: $22.00 - $24.00 • 2-4 years’ experience plus responsibilities above, • Operates, cleans, sets all machines in work area., • A clear understanding of the principal functions of the bead department., • Completes batch card independently, follow SOP’s and GMP’s strictly Pay Rate: $24.00 - $27.00 • 5+ Years’ experience plus responsibilities above, • Operates, cleans, sets all machines in work area., • Must be highly skilled in the proper set up an operation of blenders and granulators., • Applies cGMP’s & completes batch card instructions accurately - able to train all activities in bead manufacturing department., • Ability to work with minimum to no supervision, • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 1st shift: 7:00 AM - 3:30 PM 2nd shift: 3:15 PM - 11:45 PM 3rd shift: 11:00 PM - 7:30 AM

Job Description Job Description Date 07/2019 Location 1300 Airport Road, North Brunswick NJ Title Line lead, Packaging Department Packaging Reports to Supervisor, Packaging FLSA (Exempt or Non-Exempt Exempt Role Overview The Packaging Lead is responsible for coordinating line workers’ activities to ensure their assigned packaging goals are met in compliance with all quality and safety SOPs and cGMP’s. The successful candidate will monitor, manage, and maintain equipment, operators, and processes to ensure compliance to GMP’s and safety standards. This is a working Lead role and will be required to support a station on the line. The ideal candidate will also have strong interpersonal, communication, teamwork, time management and organizational skills, will be highly motivated, self-directed, and accountable, and will have the ability to work effectively with all levels of staff across the organization. Areas of Responsibility • Coordinates with the supervisor and other Leads on an as needed basis to establish schedules, job assignments and packaging sequences to meet packaging goals., • Communicates with Supervisor to resolve employee issues and take appropriate action., • Must be available to attend training seminars/classes as needed., • Delivers and manages work assignments of packaging operators (both USPL and temporary agency)., • Coordinates break rotation schedules in a timely manner that complies with labor laws and maintains production flow., • Communicates all applicable line production information to the Supervisor in shift hand-off to ensure smooth transition., • Continually inspects raw materials and finished goods to ensure safe, quality nutritionals of the highest standard., • Continually monitors processes and finished goods to ensure all is within specification, so as to catch & resolve any error or malfunction as soon as possible and prevent waste., • Replenishs supplies, and ensure proper tools are available to operators to support efficient packaging., • Follows safety protocol to ensure that warehouse is accessible and safe for everyone., • Communicates any hazards, and/or pest sighting to appropriate department for a timely resolution., • Ensures all items on the line shadow boards are intact and accounted for., • Maintains proper gowning and hygiene to ensure integrity of the product as per cGMP’s and company policies., • Follows batch records, SOP’s, and cGMP’s guidelines to ensure product specifications and tolerances are met., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times., • Establishes and maintain effective relationship with employees, line leaders, supervisors, and senior managers to communicate effectively., • Provides clear direction and expectations for direct reports and assures that tasks and responsibilities are clear., • Develops employees that contribute to the daily success of the line and can be successful in the supervisor’s absence., • Identifies strengths and weaknesses of all associates on their team to ensure optimal performance; knows which employees they can assign additional tasks to, and which need closer scrutiny., • Responsible for ensuring each employee works in a safe and responsible manner in order to create an injury-free and incident-free workplace. Complies with all job-related safety and other training requirements., • Ensures all associates are trained and following all standard operating procedures., • Works extended hours and occasional weekend overtime. Education & Qualification: • High School Degree/GED and/or 2+ years Supervisory experience., • Able to follow packaging schedules and assign personnel to the packaging lines to ensure all SOP and cGMP’s are being followed., • Must have a thorough understanding of the cause and prevention of common packaging line problems., • Must be able to follow all instructions in batch cards and sign off as required., • Demonstrates ability to work in a team and assist others., • Bi-Lingual in Spanish or Hindi is a plus., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards etc., • Mechanically inclined to understand inner workings of equipment., • Able to lift up to 30 lbs.; occasionally lift and move up to 50 pounds., • Able to travel between warehouse/distribution facilities, to meet and support departments in the Company and its customers., • Able stand and walk a minimum of 6 hours per shift, • Uses hands to finger, handle or feel, or to operate or to control objects. Lifting to waist height and/or above shoulder height, frequent bending from waist, or squatting, walking short distances., • Able to occasionally work on a rolling ladder or step stool, or to lean over equipment as well as kneeling on the floor to clean under the equipment., • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 1 shift-7:00 AM to 3:30 PM

Job Description Job Description Role Overview The Granulation/Blending Operator is responsible for the operation and set up of granulators, drying oven, blenders, screening equipment etc. in accordance with company standard operating procedures. The position includes set up, operation, cleaning, and preventative maintenance of all related equipment. The Operator is accountable for overall performance including safety, quality, shrink, attainment, and production efficiency. Operators must be capable of operating multiple like machines at one time and learning to operate a variety of equipment within the manufacturing area. Areas of Responsibility • Follow batch records, SOP’s, and cGMP's guidelines to ensure product specifications and tolerances are met., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Complete all labeling and inventory movements to ensure accurate inventory control., • Dismantle and clean any accessories and equipment while also maintaining a clean work area., • Train in the operation, cleaning and set-up of the following pieces of equipment as well as new equipment:, • Rapid Mixer Granulator: 100L & 600L and planetary mixer, • Fluid bed dryer/processor, • Tray Drying Ovens, • Fitz mill/Multi mill, • Double cone/V- blenders: 6cu. ft. to 150 cu. ft., • Screening/ sieving equipment, • Fill in appropriate logbooks for equipment and rooms., • Perform all material handling of products and components., • Correctly document all steps on batch record., • Participate in any investigation for a deviation involving a batch record., • Maintain proper gowning and hygiene to ensure integrity of the product as per company policies., • Works extended hours and occasional weekend overtime. Education & Qualification: • High school graduate or GED equivalent, • 3+ years Granulating/Blending Operator experience, • Minimum of one (1) year work experience in nutritionals, supplements, food, or pharmaceutical manufacturing industries, • 6-12 months experience, • Operates blending, screening & milling machines., • Must be proficient in proper setup and operation of blenders. Certifications, Licenses, Credentials: • N/A Skills & Ability • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards etc., • Mechanically inclined to understand the inner workings of equipment., • Demonstrates the ability to read and write basic English in order to be able to understand the industry regulated instruction sheets. Physical Requirements (lifting, etc.): • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift., • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Must be able to wear all PPE including a lab coat, face mask, booties, gloves, safety glasses/goggles, and respirators. Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 2 nd shift = 3:30 pm to 11:30 pm

Job Description Class A CDL Truck Driver Edison, NJ 08837 Class A CDL Truck Driver Summary: • Exciting opportunity for a growing forklift company for a Class A CDL Truck Driver for local deliveries. We are seeking someone who is mechanically inclined, has great people skills, and a desire for something more! If you can work with your hands, like to deal directly with the customer, and take pride in your work - you just might have what it takes to be successful as a Truck Driver. This job will allow you to grow with our business and work directly with ownership in a fast-paced environment. We are seeking Truck Driver who can problem solve and think independently while completing tasks accurately and efficiently RESPONSIBILITIES: • Work independently to transport needed equipment to and from customer locations with a commercial truck, • Drive vehicles to deliver and pick up forklifts/aerial lifts as needed, • Stock and assist with moving of forklifts and equipment, • Maintain tools, equipment, and delivery truck in efficient operating condition, keep clean (inside & out), • Unload and load forklifts and related items from the truck as required, • Lift a minimum of fifty-five (55) pounds, • Ability to maintain and follow written documents as instructed, • Ability to location customer's location and use GPS to follow, • Ability to operate forklifts, • Follow all safety and OSHA requirements while at a customer facility or at the company's location SKILLS REQUIRED: • Safely operate a heavy or tractor-trailer truck, • Load and unload cargo/forklifts, • Properly track and document activity log, • Report any issues or incidents to dispatch, • Inspect truck before and after a trip, • Perform a repeated and repetitive movement QUALIFICATIONS: • Previous experience in truck driving or other related fields, • High School diploma or general education degree (GED), • Must meet and maintain C&C Lift Truck's qualifications for Commercial Drivers, • Commercial driver's license, • OSHA certified in forklift safety is a plus, • Self-starter and can work independently, • Great organizational and multi-tasking skills, • Ability to handle physical workload, • Strong work ethic, • Exceptional Driving record BENEFITS: • Union Pension Plan, • Medical, Dental, Vision benefits available, • Vacation Time, • Retirement Plan Opportunities, • Overtime Opportunities, • Competitive wages, • Supplemental Pay (bonus pay, commission pay, signing bonus) Starting Salary Range: $20-28 an hour All candidates will be required to submit to drug screening and motor vehicle background checks. We are an equal opportunity employer, and we are an organization that values diversity. We welcome applications from all qualified candidates, including minorities and persons with disabilities. req22-01200

Overview: Action Carting Environmental Services/ Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Pennsylvania, and Ohio. We cater to a diverse range of industrial, medical, and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling, and environmental services, while keeping focus on employee, customer, and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. We are seeking a Waste Collection CDL Driver who will be working out of our Jersey City Depot (264 Broadway, Jersey City, NJ 07306) servicing NYC Routes and reporting to the Site Manager but is also subject to supervision by Route Supervisors and Dispatchers. This is a full time, Union, non-exempt, hourly position with an overnight schedule starting anywhere between 7pm and 9pm but may vary depending on business needs. Shifts may vary from 10 to 12 hours per evening or until the route is complete. This Depot will be servicing our NYC routes. Working alongside a Helper, our Waste Collection CDL Driver’s main responsibility is to safely operate a rear-loading truck, for the pick-up service of bags or containers filled with waste or recyclable material. Drivers transport the material to a disposal, transfer or recycle facility, and may make one or more trips throughout the shift. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • The driver is responsible for safely operating the truck in compliance with IWS’s safety standards as well as OSHA and DOT regulations, and local traffic laws., • Performs pre- and post-trip inspections of assigned vehicle using utilizing standard DVIR (Driver Vehicle Inspection Report); notes all issues on DVIR form for corrective review/repair., • Ensuring that the container and its content are always secure. This includes periodically checking tarps and ties, and may require the driver to climb onto containers and/or reach overhead., • Perform pre- and post-route inspections of assigned truck and document any safety issues on standard reports., • Continuously monitor for safety and service-related issues, as well as containers of other equipment in need of repair, and report any issues to the Route Supervisor or Dispatch., • All IWS employees are expected to be responsible and accountable for the safety for themselves, their colleagues, the trucks, and other equipment and property. Drivers must immediately notify Route Supervisor or Dispatch of any incidents, accidents, injuries, or property damage., • Communicate professionally with customers and Dispatchers at all times. This includes receiving complaints about schedules and quality of service. Our Drivers must make note of and report on any such complaints and respond in a courteous and respectful manner., • Attend all required training, operational meetings, and mandatory monthly Safety Meetings, • Maintain a clean, safe work area in compliance with Corporate / OSHA Standards, • Performs other duties as assigned. Requirements and Qualifications::, • Applicants must be at least 21 years of age and legally eligible to work in the United States., • All Drivers must have a valid Class A or B CDL and a clean driving record., • At least 1 year of experience operating a vehicle requiring a CDL A or B, within the last 7 years. Experience as a Driver or Helper for a refuse company is highly preferred., • Working knowledge of DOT, OSHA and applicable traffic regulations., • Must be able to speak and read English well enough to converse with the general public, understand highway traffic and signals, respond to official questions, and be able to make legible entries on reports and records., • Must be able to read and understand a map, • Must be able to meet the physical and safety requirements of the position., • The Driver position may be required to lift up to 50 pounds, as well as mount and dismount the truck multiple times every route., • Must be able to work outdoors in all kinds of weather. Action Carting Environmental Services/ Interstate Waste Services provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state and local laws. Drug-Free Workplace. Salary Range Minimum: USD $31.46/Hr. Salary Range Maximum: USD $31.46/Hr.

Overview: Interstate Waste is Hiring Class A Truck Drivers in Jersey City, NJ Overnight Position - 8pm start Monday - Friday with 1/2 day on Saturday $28.95/Hour The CDL-A Drivers will be operating tractor trailers transporting containers of municipal and commercial waste between our local Transfer Stations and our rail yards. Highlights: • Monday-Friday Schedule 8pm - 6AM (1/2 day on Saturday), • Hourly Pay Rate $28.95, • Overtime paid after 40 hours in a work week., • 1 Year (Minimum) Class A, Tractor Trailer Driving experience is required along with a good safety record. (3-5 years experience is preferred), • Inter-modal Container Experience preferred Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Connecticut, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: Essential Job Functions: Responsibilities • The driver is responsible for safely operating the truck in compliance with IWS’s safety standards as well as OSHA and DOT regulations, and local traffic laws., • This is a full time, year around, • This union position offers competitive pay and full benefits, including medical insurance, life insurance, retirement benefits, and paid time off., • All routes are local, you will be home daily., • Ensuring that the intermodal container and its content are always secure on the Tractor & Chassis Unit.. This includes periodically checking tarps and ties and may require the driver to climb onto containers and/or reach overhead., • Perform pre- and post-route inspections of assigned truck and document any safety issues on standard reports., • Continuously monitor for safety and service-related issues, as well as containers of other equipment in need of repair, and report any issues to the Route Supervisor or Dispatch., • All IWS employees are expected to be responsible and accountable for the safety for themselves, their colleagues, the trucks, and other equipment and property. Drivers must immediately notify Route Supervisor or Dispatch of any incidents, accidents, injuries, or property damage., • Communicate professionally with customers and Dispatchers at all times. This includes receiving complaints about schedules and quality of service. Our Drivers must make note of and report on any such complaints and respond in a courteous and respectful manner., • Other duties as assigned. Work Environment • The Driver position may be required to lift up to 50 pounds, as well as mount and dismount the truck multiple times every route., • As part of our commitment to safety and accountability, all our trucks are equipped with route tracking software and video monitoring., • Applicants must be at least 21 years of age and legally eligible to work in the United States., • All Drivers must have a valid Class A CDL with air brake endorsement, and a clean driving record., • At least 1 year of experience operating a vehicle requiring a CDL-A, within the last 7 years. Experience as a Driver or Helper for a refuge company is highly preferred., • Working knowledge of DOT, OSHA and applicable traffic regulations., • Must be able to speak and read English well enough to converse with the general public, understand highway traffic and signals, respond to official questions, and be able to make legible entries on reports and records., • Must be able to read and understand a map, • Must be able to meet the physical and safety requirements of the position., • Must be willing and able to work required worked hours as allowed under DOT regulation and may include weekend, night, and/or holiday work. Career opportunities We believe in providing the training and development you need to grow your career with IWS. Many of our Supervisors, Dispatchers, Managers, and other leadership staff, started their careers as Helpers or Drivers. IWS is proud to be an equal opportunity employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Salary Range Minimum: USD $28.95/Hr. Salary Range Maximum: USD $28.95/Hr.

Overview: Action Carting Environmental Services/ Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Pennsylvania, and Ohio. We cater to a diverse range of industrial, medical, and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling, and environmental services, while keeping focus on employee, customer, and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. We are seeking a Waste Collection Roll Off Driver who will be working out of our Jersey City Depot (264 Broadway, Jersey City, NJ 07306) servicing NYC Routes and reporting to the Site Manager but is also subject to supervision by Route Supervisors and Dispatchers. This is a full time, Union, non-exempt, hourly position with an overnight schedule starting anywhere between 7pm and 9pm, Sunday evening through Friday evening but may vary depending on business needs. Shifts may vary from 10 to 12 hours per evening or until the route is complete. Our Waste Collection Roll-Off Driver’s main responsibility is to safely operate a Roll-Off Truck, for the pick-up service of containers filled with waste or recyclable material. Drivers transport the material to a disposal, transfer or recycle facility, and may make one or more trips throughout the shift. A minumum of 1 year of experience driving and operating a Roll Off Truck is required. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Continuously monitor for safety and service-related issues, as well as containers or other equipment in need of repair, and report any issues to the Route Supervisor or Dispatch., • All employees are expected to be responsible and accountable for the safety for themselves, their colleagues, the trucks, and other equipment and property. Drivers must immediately notify Route Supervisor or Dispatch of any incidents, accidents, injures, or property damage., • Performs pre- and post-trip inspections of assigned vehicle using utilizing standard DVIR (Driver Vehicle Inspection Report); notes all issues on DVIR form for corrective review/repair., • Communicate professionally with customers and Dispatchers at all times. This includes receiving complaints about schedules and quality of service. Our Drivers must make note of and report on any such complaints and respond in a courteous and respectful manner., • Notifies Dispatch or Route Manager of issues as prescribed by Service Machine protocol, including blocked containers, potential missed pick-ups or problems that arise on the route., • Communicates customer requests or issues to Dispatch or Route Manager., • Completely dumps all containers and leaves the customer’s location clean and free of debris., • Completes and submits customer tickets when excess yardage must be removed., • Positions containers on the customer’s property in a manner that ensures lids are properly replaced, containers are set in an upright position, and containers do not block driveway entrances or traffic., • Work closely with Route Supervisor to improve route efficiencies and identify best practices., • Attend all required training, operational meetings, and mandatory monthly Safety Meetings, • Maintain a clean, safe work area in compliance with Corporate / OSHA Standards, • The Driver position may be required to lift up to 50 pounds, as well as mount and dismount the truck multiple times every route., • Must be able to work outdoors in all kinds of weather., • Drivers must be able to physically mount and dismount the truck throughout the duration of the workday. Requirements and Qualifications::, • Applicants must be at least 21 years of age and legally eligible to work in the United States., • All Drivers must have a valid Class A or B CDL with airbrake endorsement, and a clean driving record., • At least 1 year of experience operating a vehicle requiring a CDL A or B, within the last 7 years. Experience as a Driver or Helper for a refuse company is highly preferred., • At least 1 year of experience driving and operating a Roll Off Truck, • Working knowledge of DOT, OSHA, and applicable traffic regulations., • Must be able to speak and read English well enough to converse with the public, understand highway traffic and signals, respond to official questions, and be able to make legible entries on reports and records., • Must be able to read and understand a map., • Must be able to meet the physical and safety requirements of the position. Action Carting Environmental Services/ Interstate Waste Services provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state and local laws. Drug-Free Workplace. Salary Range Minimum: USD $32.58/Hr. Salary Range Maximum: USD $32.58/Hr.

Overview: Interstate Waste Services is Now Hiring CDL B Truck Drivers! Front Load / Side Load, Roll OFF and Rear Load Drivers Safety is our first Priority! $28.00/Hour Overtime Pay after 40hrs in a work week Please Note: In order to be considered - you must include your resume/job history when applying Highlights: • Monday thru Friday with occasional Saturday hours, • Early start time - 1am, • Hourly Pay Rate: $28.00, • Year Round-Steady work, • Full UNION Benefits packet with PTO, • 1 Year verifiable CDL experience with driving garbage trucks required Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, and recently expanded our operations of transfer stations into Pennsylvania and Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial, and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling, and environmental services, while keeping focus on employee, customer, and environmental safety. We have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: Job Highlights: • Drivers are Responsible for Safely Operating Front, Side, or Rear-Loading Trucks, for the Pick-Up Service of Bags or Containers Filled with Waste or Recyclable Material. Drivers transport the material to a disposal, transfer or recycle facility, and may make one or more trips throughout the shift, • Drivers Transport the Material to a Disposal, Transfer or Recycling Facility, & May Make One or More Trips Throughout the Shift, • We Deploy Both Manual & Automatic Trucks, • The Driver Position May Be Required to Repeatedly Lift up to 50 Pounds, & Move & Maneuver up to 100 Pounds, As Well As Mount & Dismount the Truck Multiple Times Every Route Requirements and Qualifications:: Requirements: • 21 Years of Age & Legally Eligible to Work in the United States, • Valid Class A or B CDL, • Airbrake Endorsement, • 1-year CDL driving experience with Garbage Trucks in the last 7 years., • Great Safety Record and Clean MVR, • Experience as a Driver or Helper for a Refuge Company is Highly Preferred, • Working Knowledge of DOT, OSHA & Applicable Traffic Regulations, • Ability to Speak & Read English to Converse with the General Public, understand Highway Traffic & Signals, Respond to Official Questions & Make Legible Entries on Reports & Records, • Read & Understand a Map, • Meet Physical & Safety Requirements of the Position., • Willing & Able to Work Required Worked Hours as Allowed Under DOT Regulation & May Include Weekend, Night &/Or Holiday Work Additional Job Requirements: • Routes may require Drivers to navigate through congested communities and confined or tight areas in city locations., • Highly skilled backing maneuvers are essential to successfully perform this job., • Our drivers routinely climb in and out of the truck cab to service customer accounts., • Driver pre and post inspections required. Drivers are responsible for ensuring their truck is in compliance with IWS’s safety standards as well as OSHA and DOT regulations, and local traffic laws, prior to and while operating the vehicle. Additional Information: IWS is proud to be an equal opportunity employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. Salary Range Minimum: USD $28.00/Hr. Salary Range Maximum: USD $28.00/Hr.

Job DescriptionDescription: Falcon Manufacturing, a division of NOA Brands America, Inc., is a custom fabrication facility for sheet metal, tubing, and wire components. Falcon provides economical manufacturing to large volume clients through our highly trained staff, advanced manufacturing technology, on-time delivery, and competitive pricing. Falcon is looking to add a Quality Control Inspector to our team. The Quality Control Inspector will be responsible for ensuring products and materials meet company and client quality and safety standards. QC Inspector will also partner with the General Manager and Plant Manager to make recommendations on quality improvement. General Responsibilities · Inspect parts for quality and part conformance to customer drawing · Read blueprints and specifications · Measure products with rulers, calipers, gauges, micrometers, tape measure, etc. · Inspect, test, or measure materials or products being produced · Monitor and recommend adjustments to the assembly or production process · Accept or reject finished items · Remove all products and materials that fail to meet specifications · Report inspection, test data, and quantities inspected to project and production managers · Work with engineering, project managers, and production team · Escalate issues in a timely and concise manner Requirements: What it Takes to Succeed · Minimum High School Diploma · Minimum 1 year experience in manufacturing or quality control · Strong working knowledge of product development and manufacturing processes · Ability to read and understand engineering drawings and technical prints · Use of mechanical and electronic measuring equipment · Excellent interpersonal communication and presentation skills, treating others with respect and courtesy, and accepting responsibility for your own actions · Ability to thrive in an evolving, fast-paced, deadline-driven environment · Excellent time management and organizational skills to manage multiple priorities · Ability to work independently and in a team environment · Ability to meet productivity standards, completing work in timely manner · Ability to adapt to frequent changes, delays, or unexpected events, · Ability to pay attention to details · Approachable and able to work well under pressure and high stress situations · Able to work with Microsoft Office (Word, Excel, PowerPoint, Outlook) · Able to lift, push, or pull up to 25 lbs. and occasionally up to 50 pounds Bonus Points · Bachelor’s degree in Engineering, Applied Sciences, or Business · Experience in a metal shop production . Demonstrated knowledge of OSHA Regulations and Guidelines · Experience in Power Point . Bi-lingual Spanish Location: Somerset. NJ Visit the company website at Job Type: Full-time, 1st shift Benefits · Medical/Dental/Vision Insurance · Company Paid Basic Life and AD&D Insurance · Voluntary Benefits (Supplemental Life Insurance, LegalShield, and more) · Company Paid Long-term Disability · 401K with Company Match · Paid PTO and Sick Time · 9 Paid Holidays Pay: salary exempt, from 55K to 65K DOE

Job DescriptionCompany Description BEUMER has operated in the North American market for more than 40 years and has completed over 160 airport baggage handling projects; with fully integrated design and manufacturing systems in the United States. We are a family owned intra-logistics leader where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description The Site Manager oversees the daily construction, installation, testing, and commissioning of integrated logistic system projects, including mechanical and electrical equipment, automation, and supporting structures. This role leads both self-performing and subcontracted teams, ensuring safety, quality, and schedule adherence. The Site Manager serves as the primary on-site contact for all construction-related activities and supports the Senior Project Manager to ensure successful project delivery. Directly with the Beumer Project Management, QHSE and Customer Support Teams. Responsibilities: Project & Site Leadership • Lead all on-site construction and installation activities for logistic system projects, ensuring work is completed safely, on time, within budget, and to specification., • Manage multiple trades including mechanical, electrical, structural, and controls integration teams., • Coordinate pre-construction planning, including scheduling, estimating, and staffing needs., • Conduct daily coordination meetings with subcontractors, installation supervisors, and customer representatives., • Serve as the main liaison between the project team, client, and vendors, always maintaining professional and effective communication., • Oversee the installation and commissioning of material handling systems such as conveyors, sorters, AS/RS, and related automation equipment., • Review and approve construction drawings, specifications, and RFIs., • Conduct constructability reviews throughout design and execution phases., • Ensure the project is constructed according to contract documents and engineering requirements., • Identify and resolve technical, logistical, or scheduling conflicts proactively., • Maintain a hazard-free site and ensure adherence to OSHA, company, and client safety standards., • Enforce compliance with all HSE/EHS policies and lead safety briefings, audits, and corrective actions., • Maintain high standards of quality control; document installation deficiencies and corrective actions., • Track and report project progress, production, and resource utilization., • Review and manage cost control items, including change orders, purchase orders, and expense approvals., • Oversee subcontractor performance and compliance with schedule, quality, and safety requirements., • Prepare and maintain key project reports including:, • Daily Logs and Site Reports, • 3-Week Look-Ahead Schedules, • Progress and Quality Tracking Logs, • Safety Reports and Training Records, • Change Directive and T&M Logs, • Develop and maintain project-specific plans, including:, • Site Safety Plan, • Quality Control Plan, • Pre-Construction Plan, • Site Management Plan, • Installation Work Plan, • Support procurement and subcontractor engagement processes, including scope development and proposal reviews., • Ensure accurate as-built documentation and close-out deliverables Compensation Range: $140,000-150,000 Annually The posted salary range reflects the compensation the company reasonably expects to offer for this position. Actual compensation will not be less than the posted minimum and will be based on multiple factors. Qualifications Qualifications • Bachelor’s degree in Construction Management, Engineering, or a related technical field, or equivalent practical experience., • 8–10+ years of construction or site management experience within material handling or logistic systems (conveyors, sorters, AS/RS, etc.)., • Proven ability to manage multidisciplinary subcontractors and installation teams in fast-paced industrial environments., • Strong understanding of mechanical and electrical system installations, including automation interfaces., • OSHA 30-Hour Certification required; First Aid/CPR/AED certification preferred., • Proficient with MS Office Suite, Microsoft Project, AutoCAD, Bluebeam, and construction/project management platforms (e.g., Procore, Navisworks)., • Excellent leadership, communication, and problem-solving skills., • Ability to interpret complex engineering drawings and specifications., • Willingness to travel up to 75% and work on-site for extended project durations., • Valid driver’s license and ability to meet company insurance requirements. Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees: • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most!, • Performance-Based Bonus: Eligibility to participate in our Target Agreement Plan for bonus potential.

Job Description Job Description Date 10/2025 Location 1300 Airport Road, North Brunswick NJ Title Mechanic, Maintenance (PKG.) Department Facilities / Engineering Reports to Manager, Maintenance FLSA (Exempt or Non-Exempt) Non -Exempt Role Overview The Packaging Mechanic is responsible for operating, maintaining, troubleshooting, and repairing packaging lines and auxiliary equipment (e.g. fillers, cappers, labelers, cartoners, sealers, conveyors, etc.). On higher levels, the role involves preventive maintenance, changeovers, and acting as a technical leader on the packaging floor. Areas of Responsibility Level 1 – Mechanic, Maintenance (PKG.) Mechanic supports routine maintenance, equipment cleaning, basic setup, basic troubleshooting, and minor repairs under supervision. Ideal for those newer to packaging maintenance, this role focuses on learning and executing tasks safely and accurately. Operates under close supervision, handling routine maintenance tasks such as cleaning, basic setups, and minor repairs. Escalates complex issues to higher-level technicians. Key Responsibilities: • Assist with setup, changeovers, cleaning, and basic operation of packaging lines., • Load materials (labels, cartons, films) into packaging equipment., • Perform basic visual inspections, detect packaging defects, and remove faulty units., • Assist in daily cleaning, line sanitation, and housekeeping., • Follow standard operating procedures (SOPs), batch records, and safety protocols., • Document basic packaging metrics, logs, and shift records., • Escalate technical issues to higher‑level technicians., • Assist in minor mechanical adjustments (e.g. tightening bolts, replacing belts) under supervision., • Participate in safety and quality training. Level 2 – Mechanic, Maintenance (PKG.) Mechanic requires the ability to independently perform equipment maintenance, moderate troubleshooting, perform machine change overs and setup and perform limited repairs . Employees at this level work with moderate supervision, frequently exercising independent judgment. They apply solid mechanical and electrical skills to set up, repair, troubleshoot, and maintain equipment. They are expected to analyze problems, propose solutions, and take ownership of more complex tasks. Key Responsibilities: • Independently perform maintenance, troubleshooting, and repair on packaging lines including blister, bottle, cartoning, and label printing systems., • Diagnose mechanical, electrical, pneumatic, and control system issues (motors, drives, sensors, solenoids, PLC I/O) on packaging equipment., • Execute changeovers and line reconfigurations, calibrations, and adjustments for product format changes., • Perform preventive maintenance and predictive maintenance tasks, identifying worn parts and scheduling replacements., • Read and interpret mechanical drawings, electrical schematics, and wiring diagrams., • Mentor Level 1 technicians, guiding and reviewing their work., • Assist in packaging reliability improvement initiatives, root cause analyses, and process optimization., • Support emergency breakdowns and unscheduled repairs to minimize downtime. Mechanics are highly skilled professionals who lead complex repairs, system diagnostics, and project-based maintenance work. They serve as subject matter experts and may act as a shift lead. Operates independently with full responsibility over packaging line performance. Handles advanced diagnostics, major repairs, preventive maintenance programs. Makes judgment calls on repair vs replace. Leads projects, supports regulatory compliance, and provides technical leadership. Works with the engineerign team in identfying and proposing process improvements and in maintaining adequate critical spare parts as well as consumables. Key Responsibilities: • Lead maintenance, upgrade, and optimization of complex packaging lines (blister, bottle, cartooning, label printing, IFC lines)., • Perform advanced diagnostics, root cause analysis, and system redesigns to improve reliability and throughput., • Take full responsibility for major line failures and coordinate cross‑functional resources to resolve issues., • Plan and execute capital projects, line changeovers, expansions, and line integrations., • Act as technical liaison with vendors, OEMs, contractors, and internal engineering groups., • Develop and manage preventive and predictive maintenance programs., • Mentor, train, and coach Level 1 and Level 2 technicians., • Participate in regulatory inspections and ensure compliance documentation., • Recommend equipment upgrades, modifications, or replacements., • Lead packaging continuous improvement initiatives (OEE improvements, downtime reduction). Requirements Education & Qualification: Level 1 – Mechanic, Maintenance (PKG.) • High School diploma or GED required., • 0–2 years in maintenance experience in a manufacturing environment, • Basic mechanical aptitude and tool familiarity., • Ability to follow written SOPs and safety protocols., • Willingness to work flexible shifts and overtime., • High school graduate or GED equivalent, Technical or vocational training is a plus., • 3+ years of hands-on maintenance experience in manufacturing., • Strong understanding of safety, compliance, and regulatory standards., • Knowledge of cGMP, OSHA, and equipment schematics., • Must have a high school diploma or GED equivalent, • Associate degree, technical certification, or vocational training is a plus, • 5+ Years work experience in a regulated industry such as Nutritional’s, vitamins, food manufacturing or pharmaceutical equipment maintenance is preferred., • Advanced understanding of mechanical, pneumatic, and electrical systems., • PLC troubleshooting experience preferred., • Strong leadership and communication skills., • Ability to work independently with little to no supervision., • License or certifications in electronics, pneumatics and/or hydraulics preferred., • HVAC, Electrical, Plumbing, Painting, pneumatic, boilers, compressed air systems, pumps, hydraulic and Mechanical systems as required. PLC is a plus., • General PC proficiency and work order systems etc., • Skill in handling several projects or tasks at the same time, or within a given time frame., • The ability to recognize a safety issue or potential safety issue., • Skill in quality and compliance vigilance., • Ability to maintain a professional, positive attitude at all times., • Ability to communicate with coworkers, management team members, and other individuals in a courteous and professional manner., • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards, etc., • Demonstrates the ability to read and write basic English to be able to understand the industry-regulated instruction sheets., • Demonstrates forklift experience with both sit-down and stand-up trucks., • Demonstrates the ability to read and write basic English to be able to understand the industry regulated instruction sheets., • Mechanically inclined to understand inner workings of equipment., • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift., • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 2nd shift 3:00pm to 11:30pm

Job Description Job Description Date 09/25 Location 1300 Airport Road, North Brunswick NJ Title Mechanic, Building Maintenance Department Facilities / Engineering Reports to Manager, Maintenance FLSA (Exempt or Non-Exempt) Non -Exempt Role Overview The Building Maintenance Mechanic is responsible for the upkeep, repair, and maintenance of building systems, structures and utilities supporting operations in the facility. . This includes HVAC, plumbing, electrical systems, carpentry, painting, and general facility maintenance along with supporting equipment/utilities such as Air compressors, boilers, dust collectors etc.. The role ensures a safe, functional, and compliant environment for building occupants, adhering to Good Manufacturing Practices (cGMPs) and other industry standards. Areas of Responsibility Level 1 – Mechanic, Building Maintenance Employee will assist in the upkeep and repair of building systems under close supervision. This role is ideal for individuals beginning their career in facilities maintenance within a regulated manufacturing and warehouse environment.. Employees at this level operate under close supervision. They apply foundational mechanical and electrical knowledge to assist in setup and repairs. Independent judgment is limited; more complex tasks are escalated to higher levels. Key Responsibilities: • Assist in routine inspections and basic maintenance tasks on HVAC, plumbing, and structural systems. under supervision., • Perform minor repairs on building systems (e.g., replace light bulbs, unclog drains)., • Assist in preventive maintenance activities., • Maintain cleanliness and organization of work areas., • Report issues and escalate complex problems to senior staff. Level 2 – Mechanic, Building Maintenance Employee will independently manage routine and moderate maintenance tasks, ensuring the functionality and compliance of building systems. This role is suitable for individuals with a solid foundation in facilities maintenance and a proactive approach to problem-solving. Employees at this level work with moderate supervision, frequently exercising independent judgment. They apply skills to set up, repair, and maintain facility/building and associated utilities. They are expected to analyze problems, propose solutions, and take ownership of more complex tasks. Key Responsibilities: • Conduct inspections and perform preventive maintenance on HVAC, plumbing, electrical, and structural systems., • Diagnose and repair minor to moderate issues in building systems., • Coordinate with vendors for specialized repairs and services., • Maintain accurate records of maintenance activities and inventory., • Assist in training and mentoring Level 1 technicians. Level 3 – Mechanic, Building Maintenance Employees will oversee complex maintenance projects, lead preventive maintenance initiatives, and ensure compliance with all safety and regulatory standards. This role is designed for individuals with extensive experience and leadership capabilities in facilities maintenance Employee will operates independently with full responsibility for maintenance operations, making strategic decisions to improve facility performance. Key Responsibilities: • Lead and oversee complex maintenance projects and repairs., • Develop and implement preventive maintenance schedules., • Ensure compliance with all safety and regulatory standards., • Manage relationships with contractors and service providers., • Prepare and manage maintenance budgets and reports., • Supervise and mentor Level 1 and Level 2 technicians. Requirements Education & Qualification: Level 1 – Mechanic, Building Maintenance • High school diploma or GED equivalent., • Basic knowledge of building systems., • Ability to use hand tools and power equipment safely., • Strong attention to detail and willingness to learn., • High school diploma or GED equivalent; vocational training or certification in building maintenance preferred., • 3–5 years of experience in building maintenance or a related field., • Proficiency in using diagnostic tools and equipment., • Strong problem-solving skills and ability to work independently., • High school diploma or GED equivalent; advanced certifications or associate degree in building maintenance or facilities management preferred., • 5+ years of experience in building maintenance, with at least 2 years in a supervisory role., • In-depth knowledge of building systems and maintenance procedures., • Strong leadership, organizational, and communication skills., • Ability to manage multiple projects simultaneously., • License or certifications in electronics, pneumatics and/or hydraulics preferred., • HVAC, Electrical, Plumbing, Painting, pneumatic, boilers, compressed air systems, pumps, hydraulic and Mechanical systems as required. PLC is a plus., • General PC proficiency and work order systems etc., • Skill in handling several projects or tasks at the same time, or within a given time frame., • The ability to recognize a safety issue or potential safety issue., • Skill in quality and compliance vigilance., • Ability to maintain a professional, positive attitude at all times., • Ability to communicate with coworkers, management team members, and other individuals in a courteous and professional manner., • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards, etc., • Demonstrates the ability to read and write basic English to be able to understand the industry-regulated instruction sheets., • Demonstrates forklift experience with both sit-down and stand-up trucks., • Demonstrates the ability to read and write basic English to be able to understand the industry regulated instruction sheets., • Mechanically inclined to understand inner workings of equipment., • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift., • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneel on the floor to clean under the equipment., • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employee can be exposed daily to chemicals and cleaning agents. May occasionally work on the outside of the building, on the grounds, in parking areas, or on the roof during all seasons. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 1st shift 7:00am to 3:30pm

Job Description The General Manager is responsible for the sales, profits, staffing, image, and operation of the store. They will proactively lead the store to ensure achievement of business goals in revenues, expense, profitability, customer satisfaction, inventory shrinkage, and employee morale. Furthermore, the General Manager will provide customers and employees with outstanding service through friendly, quick, efficient, accurate, and safe assistance. Essential Duties: • Responsible for the sales and profit projections as outlined by Executive Management., • Meet or exceed sales goals through the efficient execution of Company policies and procedures., • Directly supervise department managers to ensure they are in compliance with established store policies and procedures., • Provide operational and customer service training for store employees at all levels., • Investigate employee issues with assistance from Human Resources., • Maintain confidential discussions of employees’ increases, promotions or transfers until approved by executive management and paperwork has been prepared and a meeting is scheduled with the employee., • Hold weekly staff meetings with department managers to discuss and resolve any issues relating to operations, staffing, etc., • Ensure the store presents a pleasing image by changing store displays for better traffic flow., • Create, prepare and submit reports to corporate such as Daily Sales, Monthly Sales, COGS, Petty Cash, Labor Control., • Create the manager’s monthly schedule., • Provide store operations and personnel budget plan to Executive Management for review and approval., • Write operations manual to include day-to-day procedures to be followed by the department., • Prepare and present performance evaluations and counseling notices to direct reports., • Know and understand all store employees’ job responsibilities., • Proactively support any promotional activity within the store and contribute to an effective working environment., • Performs special projects and other miscellaneous duties as assigned by Executive Management. Customer Relations: • Interact with customers in a courteous and professional manner., • Provide exceptional customer service by taking care of customer disputes and readily accessible to our customers., • Inform the customer of all services and specials we can provide them. Human Resources: • Extend job offers to candidates considered for employment at the store level., • Develop a diverse, high-performance team by coaching, counseling and mentoring., • Review department timesheets for the accuracy of hours and overtime., • Provide new hire orientation for store employees., • Monitor store staffing on a daily basis to ensure each department is adequately staffed. Auditing: • Audit refunds and/or credits against itemized sales from the previous day., • Audit cash drawers and transactions., • Audit and track special events., • Create Daily Audit Report with sales information and auditing discoveries for executive management., • Research problems discovered during audits. Safety, Loss Prevention, and Procedural Compliance: • Administer IIPP procedures, Safety programs, and procedures., • Assist with curbing internal and external theft., • Support the achievement of employee safety and loss prevention objectives via all available media, (i.e. monthly meetings, one-on-one counseling)., • Ensure satisfactory maintenance, appearance, and condition of assigned facilities to comply with security, safety, and environmental codes and ordinances., • Enforce compliance with all local, state, federal regulations and company policy pertaining to safety and loss prevention., • Comply with all OSHA requirements. Non-Essential Duties: • Contributes to improvement or more efficient and less expensive ways and means in-store processes., • Assists in the research and development of resources that create timely and efficient store workflow., • Performs special projects and other miscellaneous duties as assigned by Executive Management., • Maintains store IIPP and OSHA records., • Maintains high ethical standards in the workplace., • Reports all irregular issues and problems to Executive Management for a solution., • Maintains good communication with all workers including outside contacts., • Complies and maintains the confidentiality of all company policies and procedures. Qualifications: • Bachelor's degree from preferred but not required., • 3+ years of GM management experience in team building, sales development, strong operational skills within a fast-casual theme concept., • Superior customer service skills., • Strong verbal communication skills supported by a pleasant and positive attitude of “can do” success., • Ability to gain, demonstrate, and coach with operation knowledge., • Ability to plan activities, set goals, effectively manage time and work., • Shows the ability to consistently contribute to the overall improvement of the team. Work Environment: While performing the duties of this job, the employee regularly works in a bowling center/arcade environment where high levels of noise, dust, and activity can be expected. The noise level in the work environment is usually loud. Physical Demands: While performing the duties of this job, the employee is regularly required to bend, stretch, twist, climb and have a high level of mobility/flexibility in small spaces. The employee is required to stand and walk for extended periods of time without breaks during busy times. In addition, the employee will need to be able to use their hands/fingers to handle and feel and reach with hands and arms. Lifting and/or moving up to 100lbs with assistance is required. Company DescriptionRound One Entertainment is a multi-entertainment center that features bowling, 300+ arcade games, billiards, karaoke, darts, bar and kitchen. We currently have stores in 21 states, and by year 2025 we expect to have stores in all 50 states. Round One first started in Osaka, Japan as a roller-skating rink in 1980, but after adding arcades and bowling into the facility, sales skyrocketed, and this along with all of our passionate staff have allowed us to grow into a multi-million-dollar entertainment company, with over 150 stores in Japan and U.S. alone. In 2020, Round One is projected to open 10 new entertainment centers across the US. By delivering excellent customer service to all-age groups, Round One has continued to succeed in becoming one of the fastest growing entertainment companies in America, with the help of all of our passionate bowling, amusement, food & beverage, cleaning, and mechanic staff. Round One’s mission is to bring smiles to everyone across the world by creating memorable experiences tRound One Entertainment is a multi-entertainment center that features bowling, 300+ arcade games, billiards, karaoke, darts, bar and kitchen. We currently have stores in 21 states, and by year 2025 we expect to have stores in all 50 states. \r\n\r\nRound One first started in Osaka, Japan as a roller-skating rink in 1980, but after adding arcades and bowling into the facility, sales skyrocketed, and this along with all of our passionate staff have allowed us to grow into a multi-million-dollar entertainment company, with over 150 stores in Japan and U.S. alone. In 2020, Round One is projected to open 10 new entertainment centers across the US. By delivering excellent customer service to all-age groups, Round One has continued to succeed in becoming one of the fastest growing entertainment companies in America, with the help of all of our passionate bowling, amusement, food & beverage, cleaning, and mechanic staff. Round One’s mission is to bring smiles to everyone across the world by creating memorable experiences t

Job Description Job Description Date 10/2025 Location 1300 Airport Road, North Brunswick NJ Title Maintenance Mechanic - MFG Department Facilities / Engineering Reports to Manager, Maintenance FLSA (Exempt or Non-Exempt) Non -Exempt Role Overview The Maintenance Mechanic is responsible for maintenance, repair and troubleshooting, Processing equipment such as conveyors, blowers, sifters, burners, grinders, conventional & high-speed encapsulation equipment, vacuum & hydraulic pumps, air compressors, fluid bed dryers, coating machines, granulators, tablet compression machines, etc. Areas of Responsibility Level 1 – Mechanic, Maintenance (MFG) Mechanic supports routine maintenance, equipment cleaning, basic troubleshooting, and minor repairs under supervision. Ideal for those newer to manufacturing maintenance, this role focuses on learning and executing tasks safely and accurately. Employees at this level operate under close supervision. They apply foundational mechanical and electrical knowledge to assist in setup, repair, troubleshooting, and maintenance of manufacturing equipment. Independent judgment is limited; more complex tasks are escalated to higher levels. Key Responsibilities: • Perform disassembly, cleaning, and setup of basic production equipment., • Assist senior technicians in scheduled maintenance tasks., • Replace small parts (belts, hoses, filters) with direction., • Learn and follow cGMP and safety procedures., • Complete daily logs, maintenance checklists, and safety forms., • Participate in basic troubleshooting with guidance., • Respond to facility and equipment issues under supervision., • Operate forklifts and lifts (certification preferred). Level 2 – Mechanic, Maintenance (MFG) Mechanic requires the ability to independently perform equipment maintenance, moderate troubleshooting, and lead to smaller repairs. Employees at this level work with moderate supervision, frequently exercising independent judgment. They apply solid mechanical and electrical skills to set up, repair, troubleshoot, and maintain equipment. They are expected to analyze problems, propose solutions, and take ownership of more complex tasks. Key Responsibilities: • Conduct intermediate-level repairs on packaging and processing equipment., • Troubleshoot mechanical, pneumatic, and electrical systems., • Use diagnostic tools (calipers, micrometers, multimeters, etc.)., • Coordinate with vendors to address equipment issues., • Maintain spare parts inventory and request supplies., • Operate and maintain boilers, HVAC, pumps, and compressors., • Record maintenance activities accurately in logbooks and systems., • Train and mentor Level 1 Technicians., • Support emergency calls and on-call rotations. Level 3 – Mechanic, Maintenance (MFG) Mechanic are highly skilled professionals who lead complex repairs, system diagnostics, and project-based maintenance work. They serve as subject matter experts and may act as a shift lead. Employees operate with minimal to no supervision. They are trusted to independently plan, diagnose, repair, and maintain complex manufacturing equipment. They make high‑level judgments, lead projects, and serve as technical experts and advisors. Employees work closely with the engineering team to identify mechiancal issues, processing issues and propose process improvement measures mechiancally to improve productivity and effeciency of equipment. Have a deep understanding of the process and equipment being used. Key Responsibilities: • Lead troubleshooting and repairs of high-speed and complex machinery (e.g., encapsulators, fluid bed dryers, tablet presses)., • Diagnose and resolve advanced mechanical/electrical problems., • Manage and execute preventative maintenance programs., • Read and interpret advanced schematics, blueprints, and manuals., • Serve as a technical liaison between departments and vendors., • Lead regulatory inspections (OSHA, EPA, etc.) support and documentation., • Mentor and train Levels 1 and 2 staff., • Plan and coordinate plant shutdowns and major repirs. Education & Qualification: Level 1 – Mechanic, Maintenance (MFG) • High School diploma or GED required., • 0–2 years in maintenance experience in a manufacturing environment, • Basic mechanical aptitude and tool familiarity., • Ability to follow written SOPs and safety protocols., • Willingness to work flexible shifts and overtime., • High school graduate or GED equivalent, Technical or vocational training is a plus., • 3+ years of hands-on maintenance experience in manufacturing., • Strong understanding of safety, compliance, and regulatory standards., • Knowledge of cGMP, OSHA, and equipment schematics., • Must have a high school diploma or GED equivalent, • Associate degree, technical certification, or vocational training is a plus, • 5+ Years work experience in a regulated industry such as Nutritional’s, vitamins, food manufacturing or pharmaceutical equipment maintenance is preferred., • Advanced understanding of mechanical, pneumatic, and electrical systems., • PLC troubleshooting experience preferred., • Strong leadership and communication skills., • Ability to work independently with little to no supervision., • License or certifications in electronics, pneumatics and/or hydraulics preferred., • HVAC, Electrical, Plumbing, Painting, pneumatic, boilers, compressed air systems, pumps, hydraulic and Mechanical systems as required. PLC is a plus., • General PC proficiency and work order systems etc., • Skill in handling several projects or tasks at the same time, or within a given time frame., • The ability to recognize a safety issue or potential safety issue., • Skill in quality and compliance vigilance., • Ability to maintain a professional, positive attitude at all times., • Ability to communicate with coworkers, management team members, and other individuals in a courteous and professional manner., • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards, etc., • Demonstrates the ability to read and write basic English to be able to understand the industry-regulated instruction sheets., • Demonstrates forklift experience with both sit-down and stand-up trucks., • Demonstrates the ability to read and write basic English to be able to understand the industry regulated instruction sheets., • Mechanically inclined to understand inner workings of equipment., • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift., • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneel on the floor to clean under the equipment. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment.

Job Description Are you into video games, bowling, and karaoke? Are you friendly and outgoing? Do you enjoy being around people and working in a fun environment? Then you’re the kind of person we’d love to hire! Overview: The Assistant General Manager is responsible for assisting the GM with sales, profits, staffing, image, and operation of the store. They will assist with proactively leading the store to ensure the achievement of business goals in revenues, expense, profitability, customer satisfaction, inventory shrinkage, and employee morale. Furthermore, the Assistant General Manager will provide customers and employees with outstanding service through friendly, quick, efficient, accurate and safe assistance. Essential Duties: • Assist with the sales and profit projections as outlined by corporate management., • Assist with meeting and exceeding sales goals through the efficient execution of Company policies and procedures., • Assist with supervise department managers to ensure they are in compliance with established store policies and procedures., • Assisting with providing operational and customer service training for store employees at all levels., • Assist with investigating employee issues with assistance from Human Resources & resolving escalated issues., • Maintain confidential information related to employee, company, & store topics., • Assist with holding weekly staff meetings with department managers to discuss and resolve any issues relating to operations, staffing, etc., • Ensure the store presents a pleasing image by changing store displays for better traffic flow, • Assist with creating, preparing and submitting reports to corporate such as: Daily Sales, Monthly Sales, COGS, Petty Cash, Labor Control, • Assist with creating managers’ monthly schedule, • Assist with providing store operations and personnel budget plan to Executive Management for review and approval., • Assist with writing operations manual to include day-to-day procedures to be followed by department., • Assist with preparing and presenting performance evaluations and counseling notices to direct reports., • Know and understand all store employees’ job responsibilities., • Proactively support any promotional activity within the store and contribute to an effective working environment., • Interact with customers in a courteous and professional manner, • Provide exceptional customer service by taking care of customer disputes and readily accessible to our customers., • Extend job offers to candidates considered for employment at store level., • Develop a diverse, high-performance team by coaching, counseling and mentoring., • Review department timesheets for accuracy of hours and overtime., • Provide new hire orientation for store employees., • Audit refund and/or credits against itemized sales from previous day., • Audit cash drawers and transactions., • Audit and track special events., • Assist with creating Daily Audit Report with sales information and auditing discoveries for executive management., • Assist with administering IIPP procedures, Safety Program and procedures., • Assist with curbing internal and external theft., • Ensure satisfactory maintenance, appearance and condition of assigned facilities to comply with security, safety and environmental codes and ordinances., • Enforce compliance with all local, state, federal regulations and company policy pertaining to safety and loss prevention., • Contributes to improvement or more efficient and less expensive ways and means in store processes, • Assists in the research and development of resources that create timely and efficient store workflow, • Performs special projects and other miscellaneous duties as assigned by Executive Management, • Assist with maintaining store IIPP and OSHA records, • Maintains high ethical standards in the workplace, • Reports all irregular issues and problems to Executive Management for solution, • Maintains good communication with all workers including outside contacts, • Complies and maintains confidentiality of all company policies and procedures Qualifications: • Bachelor's degree from preferred but not required., • 3+ years management experience in team building, sales development, strong operational skills within a fast casual theme concept., • Ability to gain, demonstrate, and coach with operation knowledge., • Ability to plan activities, set goals, effectively manage time and work., • Shows ability to consistently contribute to the overall improvement of team., • Must have or be willing to obtain alcohol certification in compliance with local ordinance. Work Environment: While performing the duties of this job, the employee regularly works in a bowling center /arced e environment where high levels of noise, dust and activity can be expected. The noise level in the work environment is usually loud. Physical Demands: While performing the duties of this job, the employee is regularly required to bend, stretch, twist, climb and have a high level of mobility/flexibility in small spaces. The employee is required to stand and walk for extensive periods of time without breaks during busy times. In addition, the employee will need to be able to use their hands/fingers to handle and feel and reach with hands and arms. Lifting and/or moving up to 100lbs with assistance is required. The above job description identifies the essential job functions and skills needed by the person or persons assigned to this position. These job functions and skills are not intended to be a complete and exhaustive list of all responsibilities, duties and skills required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions. The information contained herein is subject to change at the company’s discretion. Company DescriptionRound One Entertainment is a multi-entertainment center that features bowling, 300+ arcade games, billiards, karaoke, darts, bar and kitchen. We currently have stores in 21 states, and by year 2025 we expect to have stores in all 50 states. Round One first started in Osaka, Japan as a roller-skating rink in 1980, but after adding arcades and bowling into the facility, sales skyrocketed, and this along with all of our passionate staff have allowed us to grow into a multi-million-dollar entertainment company, with over 150 stores in Japan and U.S. alone. In 2020, Round One is projected to open 10 new entertainment centers across the US. By delivering excellent customer service to all-age groups, Round One has continued to succeed in becoming one of the fastest growing entertainment companies in America, with the help of all of our passionate bowling, amusement, food & beverage, cleaning, and mechanic staff. Round One’s mission is to bring smiles to everyone across the world by creating memorable experiences tRound One Entertainment is a multi-entertainment center that features bowling, 300+ arcade games, billiards, karaoke, darts, bar and kitchen. We currently have stores in 21 states, and by year 2025 we expect to have stores in all 50 states. \r\n\r\nRound One first started in Osaka, Japan as a roller-skating rink in 1980, but after adding arcades and bowling into the facility, sales skyrocketed, and this along with all of our passionate staff have allowed us to grow into a multi-million-dollar entertainment company, with over 150 stores in Japan and U.S. alone. In 2020, Round One is projected to open 10 new entertainment centers across the US. By delivering excellent customer service to all-age groups, Round One has continued to succeed in becoming one of the fastest growing entertainment companies in America, with the help of all of our passionate bowling, amusement, food & beverage, cleaning, and mechanic staff. Round One’s mission is to bring smiles to everyone across the world by creating memorable experiences t

Job Description Maintenance Mechanic About CompoSecure Founded in 2000, CompoSecure (Nasdaq: CMPO) is a technology partner to market leaders, fintechs and consumers enabling trust for millions of people around the globe. The company combines elegance, simplicity, and security to deliver exceptional experiences and peace of mind in the physical and digital world. CompoSecure's innovative payment card technology and metal cards with Arculus security and authentication capabilities deliver unique, premium branded experiences, enable people to access and use their financial and digital assets, and ensure trust at the point of a transaction. For more information, please visit and . Position Overview: This position is responsible for ensuring the continuous functionality of all production equipment. Key Responsibilities: • Perform regularly scheduled preventive maintenance on all production equipment and machinery., • Perform emergency repairs on all production equipment and machinery., • Conform to all procedures regarding spare parts usage., • Perform repairs and maintenance according to any and all OSHA and other safety requirements, i.e.: lockout/tagout., • Perform all maintenance and repairs in an accurate, complete and timely manner., • Maintain mechanical availability of all production equipment., • Maintain mechanical availability of all facility equipment. Other Important Responsibilities: • Maintain a daily log of Preventive Maintenance and downtime through Computerized Maintenance Management System, Simplicity CMMS, • Maintain a daily work log and EOD/end of day email report to Upper management., • Assist the Parts Inventory Clerk with proper specs and info when sourcing parts for repairs and regular maintenance., • Work with outside contractors during routine maintenance and emergency repairs., • Timely Corrective Action response and resolution to relevant situations., • As required, will install new equipment, facility upgrades, perform repair work as needed and support production., • Engage and support companywide Safety and Cleanliness Programs., • As part of the EMS- Environment Management System, will meet compliance obligations and accountability by contributing but not limited to the company's recycling guidelines, proper waste and other environmental performance practices, • Will be required to perform other job functions, as assigned Qualifications: • A minimum 7-10 years (or more) of relevant experience., • Electrical, Mechanical, Welding, Electro-Mechanical and equipment training, a plus., • High School Graduate required. Vocational Degree Preferred., • Experience with a virtual work order and spare parts management system preferred., • Strong analytical skills., • Task oriented excellent organizational skills, ability to prioritize work load., • Enthusiastic attitude, cooperative team player, adaptable to new or changing circumstances, professional demeanor, self-motivated, creative and innovative. Physical requirements and work environment: • Must be able to lift 70 lbs., • Must be able to sustain physical work for 8+ hours on a standard 3 shift operation or 12+ hours per day on 24/7 operation. Also includes the following:, • Standing, • Reaching and pulling, • Sight, • Walking through shop, • Bending, climbing and crouching., • Office environment is of moderate noise level., • Shop noise levels are such that protective ear-coverings are recommended., • Sometimes subject to external weather conditions., • Short notice, overtime demand according to equipment or facility breakdowns., • Repair work on heavy equipment often in a seated or standing position., • Grease, oil, water exposure., • Mechanics must provide all industry required hand tools and tool box. Checklist will be provided. All specialty tools will be provided by CompoSecure. At CompoSecure, we believe in supporting our employees with a comprehensive benefits package that promotes health, financial well-being, and work-life balance. Our full-time team members enjoy access to: • Medical, Dental & Vision Coverage, • Flexible Spending Accounts (FSA), • Company-Paid Life and Disability Insurance, • 401(k) with Company Match, • Paid Time Off & Paid Holidays, • Annual Bonus Opportunities, • Employee Assistance Program (EAP) Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to . CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Job DescriptionDescription: Position Summary: As a Field Technician at Lewis Environmental, you will play a critical role in delivering high-quality service across our four primary service lines: Remediation, Waste Transportation, Industrial Maintenance, and Emergency Response. This position offers you the opportunity to work in a dynamic environment, while upholding our Core Values of Safety, Accountability, Integrity, and Quality. You will work closely with Lewis team members to execute various field assignments and contribute to the success of the team and our clients. Requirements: Key Responsibilities: • Execute field assignments under the direction of the Field Supervisor, ensuring all tasks are completed in a safe and efficient manner., • Follow all company safety protocols and OSHA regulations, attending all required safety training and maintaining a focus on safety in all tasks., • Perform industrial cleaning and other manual labor tasks in line with company or client procedures to achieve safety and quality goals., • Travel daily and occasionally overnight for both planned and emergency response services., • Adhere to company policies and industry regulations for handling hazardous and non-hazardous materials safely and responsibly., • Motor Vehicle Record (MVR): Must have a clean driving record., • Valid Driver’s License: Must possess a valid, unrestricted driver’s license., • Availability: Flexibility to work evenings, weekends, and be on call as required., • Strong commitment to Safety, Accountability, Integrity, Quality, and Teamwork., • OSHA Training: 40-hour OSHA certification and/or related safety training is a plus but will be provided if necessary., • This position involves a mix of physical and manual labor in diverse environments. The physical demands include:, • Ability to lift and carry up to 60 lbs., • Ability to work in extreme weather conditions, both hot and cold, and in confined spaces., • Comfortable wearing respirators as necessary for certain tasks – must maintain clean shave., • Travel and work in inclement weather conditions., • Perform manual labor, standing, walking, and exerting physical effort for 50-70% of the workday. Equal Opportunity Employer Lewis Environmental is an Equal Opportunity Employer and values diversity in the workplace. We do not discriminate based on race, color, national origin, sex, disability, or religion. All qualified applicants will receive consideration for employment without regard to any protected class.

Job Description Environmental Field Service Technician Location: Various sites across NJ, NY, PA Company: Paragon Staffing, LLC Pay Rate: $18/hour Contact: Call or text Andrehina Rodriguez (848) 391-1020 About the Role Paragon Staffing is now hiring Environmental Field Service Technicians to support environmental cleanup, remediation, and industrial service projects. You’ll be part of a team that helps protect workers, the environment, and local communities. Responsibilities * Perform tank cleanings, confined space entry, and hazardous waste handling * Support oil spill response, site remediation, and industrial cleaning * Operate pressure washers, pumps, vacuums, and other field equipment * Assist with site setup, decontamination, and cleanup operations * Follow all OSHA and HAZWOPER safety protocols * Travel to project sites as needed (some overtime and weekend work possible) Requirements * Valid driver’s license and reliable transportation required * Ability to lift 50+ lbs and work in physically demanding environments * Strong safety awareness and attention to detail * Team-oriented with a positive work ethic * OSHA 40-Hour HAZWOPER certification (training provided through Paragon) * Confined Space (training provided through Paragon) * Respirator Fit Testing (provided through Paragon) * Medical Clearance (provided through Paragon) Why Work with Paragon Staffing * $18/hour starting pay with overtime opportunities * Weekly pay and all PPE provided * All certifications and safety training provided at no cost * Long-term and project-based work available Powered by JazzHR GhPqfbd3Lm

Job Description At PEARCE, we've got a career for you! Join the nation's leading independent service provider for critical telecommunication and renewable energy infrastructure. We are the premier independent service provider for our nation's critical infrastructure. With over 2,500 team members nationwide, Pearce delivers comprehensive engineering, maintenance, repair, and repowering solutions, ensuring the seamless operation of our nation's wireless and wireline telecom, commercial and utility-scale solar and wind projects, EV charging stations, as well as large-scale power generation, critical power and energy storage assets. Your Impact The Advanced Solar Field Service Technician (Operations and Maintenance) in the PEARCE Renewables Solar Operations and Maintenance Division performs tasks involving physical labor at solar energy sites near New Brunswick, New Jersey. The Solar Field Service Technician is responsible for the operation and maintenance (O&M) of solar power plants in accordance with established preventative and corrective maintenance standards while always maintaining safety and professionalism. These are local sites-candidates should reside within 50 miles of the New Brunswick, New Jersey areas. Core Responsibilities • Conduct preventative and corrective maintenance of Solar Utility and Sub-Station equipment., • Responsible for documentation including, but not limited to, work orders, time logs, inventory control, and emergency information schedules., • Provide a working knowledge of troubleshooting electrical components with help and use of digital multi-meters, meggers, amp clamps, and similar equipment., • Testing/troubleshooting installed solar equipment and ensuring proper working order., • Must have a strong safety background with experience in Lock Out Tag Out (LOTO) and Job Hazard Analysis (JHA)., • Able work in a solo as well as a group environment. Core Experience • 2+ years' experience in Commercial/Industrial operations and maintenance (O&M) on solar power plants is preferred., • Preventative Maintenance experience on Solar Utility equipment is preferred., • Candidates should possess strong mechanical and electrical experience with troubleshooting and installation skills., • Specific solar experience with Inverters, Tracker Systems, or Sub-Stations Equipment (TMEIC/SMA/Sungrow/Nextracker/ATI, etc.) is preferred., • Takes initiative to escalate issues at site., • Ability to train, mentor, and develop laborers into Apprentices. At Pearce safety is our number one concern. Candidates must be able to comply with OSHA Standards. • Must live within approximately 50 miles of the New Brunswick, New Jersey areas., • Be exposed to ambient temperatures while working outdoors., • Lift and move equipment as needed (up to 50 pounds)., • Employment may require working on weekends and holidays, including an "on call" service availability via telephone/text message. At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range$30—$42 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. At PEARCE, we are an equal opportunity employer dedicated to cultivating an inclusive environment that empowers employees to excel and make a meaningful impact, providing a dynamic space for field technicians, service specialists, and corporate professionals to flourish and propel their careers forward within our nationwide presence and expansive service offerings. Learn more about us at !

Job Description C&C Lift Truck is a growing forklift dealership. We are looking for a Mobile Tire Technician out of our Edison, NJ location who is ready to grow with our business and work directly with ownership in a fast-paced environment. This individual is mechanically inclined, has great people skills and a desire for something more! The Mobile Tire Technician is responsible for properly installing and removing mounted tires on customer’s lift trucks and company rental forklifts at the customer’s location and on-site. We are seeking an individual who can problem solve and think independently while completing tasks accurately and efficiently. If you can work with your hands, deal directly with the customer, and take pride in your work - you just might have what it takes to be successful at C&C Lift Truck. We firmly believe that our company is only as good as the people we employ. Join a company that values its employees and rewards them for a job well done! The hourly rate offered will be based on experience. This is a union position. Job Description: • Travel to various customer locations to service the customer and satisfy their needs., • Work independently to press and mount cushion, solid, and air tires in our mobile tire truck, • Install tires on forklifts and material handling equipment adhering to Company guidelines, • Follow all safety rules, wear proper PPE, and demonstrate a safety conscious mindset, • Complete and properly manage paperwork for each job, as well as provide exceptional customer service both on the job site and while traveling in company vehicle, • Maintain tools, equipment, and mobile tire truck in efficient operating condition, keep clean (inside & out), • Deliver, pick up, unload and load tires and related items from truck as required, • Perform repeated and repetitive movement consistent within the tire industry, • Lift a minimum of seventy-five (75) pounds, • Stock, organize and maintain physical tire inventory, • Follow all safety and OSHA requirements while at a customer facility or at company location, • High School diploma or general education degree (GED), • Valid Driver's License from their state of residence. A commercial Driver's License is not required but candidates with a CDL will be strongly considered, • DOT Medical card required, • Must meet and maintain C&C Lift Truck's qualifications for Commercial Drivers, • Tire /Forklift background preferred, • Mechanical skills preferred, • Self-starter and can work independently, • Great organizational and multi-tasking skills, • Excellent communication skills; must be able to sell our services, • Union Pension Plan, • Medical, Dental, Vision benefits available, • Vacation Time, • Retirement Plan Opportunities, • Overtime Opportunities $16.00 – $20.00 per hour. Plus, performance bonuses. Schedule: 7:30 a.m. to 4:00 p.m. shop hours C&C requires all prospective employees to undergo a confidential drug test, motor vehicle and criminal check prior to joining us. We are an equal opportunity employer. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.

Job Description The People's Champ Moving & Delivery Service,Llc in Freehold, NJ is looking for one delivery driver to join our team. Our ideal candidate is self-driven, punctual, and reliable. As a professional mover, you will be packing and moving customers’ household or office belongings. Moves range from just a single item to an entire home or office. Items to be moved can often weigh several hundred pounds. Moves involving stairways are very common. The workday can be long (a ten-hour day or longer is not unusual). These demands require a person with above average strength, stamina, fitness and skill. Tasks include: • Responsible for transporting household goods/commercial equipment and furniture from origin to destination., • Inspecting trucks before and after trips, completing and submitting truck condition reports., • Carrying heavy items long distances and up/down stairways., • Manually hoisting heavy items., • Wrapping furniture and equipment., • Box-pack items such as breakables, books, artwork, knick-knacks., • Working with moving equipment and tools., • Navigating traffic, road conditions and using maps or gps tools., • Disassembling and reassembling furniture and equipment., • Providing quality, customer service at all times., • Acting as a liaison with move coordinator and sales representatives, dispatch and warehouse staff to insure customer satisfaction., • Adhering to all safety, OSHA and DOT regulations in accordance with The People's CHAMP Moving & Delivery Service safety program., • Complying with drug-free workplace initiatives., • Maintaining a tool kit for installation, assembly and breakdown of furniture or other items for transport., • Understanding and completion of move packet paperwork along with clear documentation of inventories. Qualifications • Must have valid driver’s license with clean driving record., • Must be 21 years of age and pass requirements of our insurance company., • Ability to drive a box truck or semi truck., • High School Diploma/G.E.D required., • Must pass a background check and drug test., • Capable of lifting 75lbs on a regular basis with above average stamina and fitness skills., • Must have good penmanship, basic math skills and excellent grammar. Pay based on experience We are looking forward to reading your application.

Job Description Job Title: Commercial HVAC Service Technician Job Location: Edison, NJ Operating Company: Energy Transfer Solutions FLSA Status: Non-Exempt This is a FULL-TIME position Overview: Air Control Concepts is more than just a collection of firms, we are a community of forward-thinking experts committed to excellence, innovation, and collaboration. With a focus on commercial HVAC representation, we bring together esteemed entities from diverse regions, each boasting decades of invaluable experience. We understand that success in the HVAC industry goes beyond individual accomplishments. That's why we believe in the power of unity and collaboration. By leveraging our collective assets, knowledge, and resources, we empower our member firms to deliver unparalleled service, safety, and efficiency to clients across healthcare, commercial, and residential sectors. This position is with one of our operating companies’ Energy Transfer Solutions. Check out their website here: Energy Transfer Solutions, a local leader in specialty commercial and industrial HVAC equipment and services, is seeking a skilled Commercial HVAC Technician to join their team in the Edison, NJ area. Essential Duties and Responsibilities: • Service, Troubleshooting & Optimization – Diagnose and resolve issues on a variety of commercial HVAC systems. Perform preventative maintenance and fine-tune system performance for energy efficiency and reliability., • Customer Relationship Management – Build and maintain strong client relationships by addressing service concerns, recommending improvements, and delivering high-quality communication and support., • Communication & Documentation – Coordinate with internal teams to ensure efficient scheduling and follow-up. Accurately complete service reports, work orders, and related documentation in a timely manner., • Training & Mentorship – Stay up to date through ongoing technical training. Serve as a resource and occasional mentor to junior technicians in the field., • Safety & Compliance – Follow all safety guidelines and regulatory requirements as outlined by OSHA, the company, and customer sites., • Emergency Response – Participate in the on-call rotation to provide after-hours support for urgent service needs., • Other Duties as Assigned – Contribute to the team and company by stepping in where needed. Competencies: • Technical Expertise & Problem Solving – Applies in-depth knowledge of commercial HVAC systems, tools, and technologies to troubleshoot issues and implement effective solutions. Maintains strong attention to detail and follows through on complex service tasks., • Customer & Team Engagement – Builds trust and maintains positive relationships with customers through clear, professional communication and consistent service. Collaborates well with peers, dispatch, and management to support team goals., • Time & Task Management – Prioritizes responsibilities effectively, manages schedules, and maximizes productivity across varying service calls and work environments., • Adaptability & Continuous Learning – Responds well to changing job demands and field conditions. Actively participates in training and embraces new tools, technologies, and methods to stay current in the trade. Experience & Requirements: • 3–5 years of commercial HVAC service experience with systems such as VRF, rooftop units, and packaged equipment., • EPA Universal Certification required; OEM-specific training or certifications preferred., • Skilled in diagnostics, troubleshooting, and interpreting service manuals and schematics., • Strong communication and customer service skills with a professional, team-focused mindset., • Valid driver’s license with clean driving record; able to pass a background check and drug screening., • Physically capable of lifting heavy equipment, climbing ladders, and working in various field conditions, including rooftops and tight spaces., • Willingness to participate in an on-call rotation for emergency service coverage. Additional Role Highlights: • Competitive pay: $40-$55 an hour or more based on experience, plus, overtime and quarterly bonus opportunities, • Company provides a laptop, cellphone, tools, and more!, • On-site training facility so you can improve your skillset! ETS is proud to have their own on-site training facility so you can be ever-expanding your skillset. Plus, you’ll have access to factory and online training courses. ETS will be dedicated to investing in you and improving your skills., • Advancement and pay increases: Energy Transfer Solutions is growing and believes in promoting from within. You will have annual reviews where you will have opportunities to advance and increase your pay!, • Desirable daytime Monday – Friday schedule with occasional overtime opportunities available on weekends and evenings. You will be on-call once every three months., • Work on a wide variety of equipment and never get bored! ETS is proud to serve a robust clientele, and you will be exposed to many kinds of equipment. Benefits: We offer a competitive and comprehensive benefits package, including: • Health & Wellness – Medical, dental, vision, and life insurance coverage to support your well-being., • Financial Security – 401(k) retirement plan with company match and short/long-term disability coverage., • Work-Life Balance – Paid time off (PTO), paid holidays, and an employee assistance program (EAP)., • Professional Development – Ongoing training opportunities and support for continuing education AIR Control Concepts is an Equal Opportunity Employer. Company DescriptionAbout the Company: Established in 2003, Energy Transfer Solutions is a leading provider of specialty commercial and industrial HVAC equipment and services. We serve customers throughout the Tri-State area (Pennsylvania, Delaware and New Jersey). Find us online at the Company: Established in 2003, Energy Transfer Solutions is a leading provider of specialty commercial and industrial HVAC equipment and services. We serve customers throughout the Tri-State area (Pennsylvania, Delaware and New Jersey). Find us online at

Responsibilities: • 8 am to 8pm (3-2-2-3), • Hourly pay rate: $31.52, • Mauser Packaging Solutions offers a comprehensive benefits package, including medical, dental, paid time off, and other competitive benefits., • Observe and record production operations, • Review operational schedules and coordinate manufacturing activities to ensure minimum costs and prevent operational delays. i.e.: SMED development, ergonomics, LDR improvement., • Inspects machines and equipment to ensure specific operational performance and optimum utilization, • Seeks methods to improve standard operational and working practices, • Observe workers, molding machinery, and conveyors to ensure compliance with safety standards and operating efficiency, • Coordinates with mold set technician, department supervisors and production personnel for parts, tooling, equipment, and machinery, • Performs preventative maintenance on tooling and equipment as directed, • Works with the machine attendants and supervisors in training personnel, • Follows all safety rules and procedures, • Drive scrap reduction on the production floor, • Assist process engineer with optimizing cycle times, • Ensure presses are running at optimized cycle, • A minimum of a High School diploma. Bachelor’s degree in manufacturing, engineering, or related area and at least one year's work experience preferred., • Lean Six Sigma or Kaizen experience/certification a plus, • Good verbal and written communication skills, • Good Mathematical and organizational skills, • Working knowledge of OSHA standards and GMPs, • Good interpersonal skills, • Experience and demonstrated knowledge of troubleshooting skills, preferably in injection and blow molding processes, • Ability to work for up to 12 hours at a time on Day shift or Night shift Do you want to work with people who are dedicated to innovation and making the world a better place? Do you want to build a career with a company that provides opportunities for growth and development? Mauser Packaging Solutions is that company. Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team. At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers better—and help them be better stewards of the environment. Whether you’re a seasoned professional—or just beginning your career—there’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status. Benefits: Mauser Packaging Solutions offers a comprehensive benefits package, including medical, dental, paid time off, and other competitive benefits.

Job DescriptionSalary: $35-$45 p/h - Based on experience Come join a team that has been in business for over 39 years! We take great pride in our exceptional reputation in the commercial HVAC industry built on the quality of our work and the dedication of our loyal employees. We offer a comprehensive benefits package, competitive salaries, and company-sponsored events throughout the year. Our leadership team is transparent about the direction of the company and our goals, so every team member understands where were headed. We invest in our people and training, and were looking for individuals who think outside the box and want to grow with us. If this sounds like you, keep reading! POSITION SUMMARY: Critical thinker and self-starter, willing to go the extra mile and stay committed to educating themselves in our constantly changing field. Candidates should have extensive experience with laying out and installing of heating, cooling, ventilation, piping and refrigeration systems. Candidates should also be comfortable working with little to no supervision and possess a strong work ethic and team mindset Requirements and Qualifications: • Minimum 5 years of Commercial HVAC/R installation experience (We are not seeking entry-level applications or those with residential experience only), • Experience Including, but not limited to;, • Split Systems, • Package Units, • Ductless Systems, • Heat Pumps, • Cooling Towers, • Boilers, • PTAC units, • VAVs, • Variable Refrigerant Flow (VRF) systems, • Chillers, • Certification through the Environmental Protection Agency to handle refrigerants required (Universal or Type I & Type II, 410A), • High School diploma or GED equivalent, • Knowledge of hand cutting tools, electric saws, and electrical and gas equipment., • Safety-minded and knowledge of OSHA & NFPA safety regulations., • Current valid drivers license for operating motor vehicles in the state of New Jersey, • Must be punctual, dependable and adhere to a daily schedule with multiple appointments in different locations, • Must be available for seasonal overtime during the summer and winter months, • Must have professional appearance, basic writing and computer skills, customer service skills, • Must have strong installation skills with ability to think outside of the box, • Experience with commercial pipefitting is a plus,, • PVC, Grooved, Threaded, Copper (Sweat, Pro-Press, Brazed), Welded Pipe Working Conditions: Pushing, pulling, and lifting various types of equipment. Walking, standing, and stooping for extended periods of time. Climbing and working from ladders and staging while carrying equipment that may weigh up to 75 lbs. Working at difficult angles to perform repairs. Working in all types of weather conditions. May be exposed to dust, noise, heat, cold, lubricants, and chemicals during the course of work. The above statements are intended to describe the general nature and level of the work being performed by people assigned this job. They are not an exhaustive list of all duties, responsibilities, knowledge, skills and abilities associated with the job. Job Type: Full-time and project location based, 7AM - 3:30PM Daily We are a drug free company and require all employees to pass a drug test prior to beginning employment Company Benefits: • Competitive Industry Salary based on experience and training, • Paid Vacation Days, • Paid Sick Days, • Paid Holidays, • Health Care (contributory), • Dental Plan (employer paid), • Vision Insurance, • 401K Matching, • Pretax Flexible spending account (FSA), • Cell Phone, • Company Issued Uniforms, • Company Issued EZ-pass, • Technician Training (In-House & School Based), • Company Vehicle if eligible, • Employee Referral Program, • Overtime available, • Company Events

Job Description At IPS, we are global leaders in developing innovative solutions for the consulting, architecture, engineering, project controls, procurement, construction management, and CQV of technically complex facilities, primarily in the life sciences industry. We are looking for a talented Contract Analyst to join our team at our office located in -------------------Somerset, New Jersey. In this role, you will leverage extensive professional experience and skills, and can work autonomously or in a team environment. You will report to a Manager of Project Controls and administer contract and purchase order flow by departmental SOPs, policies, and project-specific requirements. You will also act as quality assurance (QA) checks on all contracts and purchase orders. Additionally, you will guide internal and external stakeholders on contract management requirements, including corrective actions to key contract elements that do not meet project and/or IPS standards. Additional Responsibilities • Bid Scopes of Work: Work with the project team to prepare SOW documents to attach to the Requests for Proposals (RFP)., • Recommendations To Award (RTA): Prepare or assist in the preparation of RTA. Work with the Project Team to prepare this document., • Conformed Scopes of Work (SOW): Draft and finalize., • Change Order Management: Review change order request (COR) documents for compliance with the contract documents., • Prepare all necessary documents to process change orders to purchase orders., • Contract Management/Support Documentation: Draft letters or related correspondence to support adherence to contract terms and conditions., • Contractor Feedback Documentation: Collect, store, and report on feedback detailing contractor performance., • Participate in weekly engineering meetings between project management, project engineering, project controls, Company procurement, licensing and permitting, Company corporate properties, the Company’s engineering contractor(s), and other project stakeholders., • Communicate daily with the project management team, project Engineering, Company engineering contractor, and other project stakeholders., • Support the project management team in assessing critical path and near-critical path work with alignment and coordination of all on-site resources throughout the construction and commissioning phases of the project., • Assist in interfacing with the Company's engineering contractor and the Company’s engineering department, to assess engineering deliverables and schedules, to ensure design management and coordination of all project stakeholders, with, • Issued for Construction (“IFC”) documents, timely resolution of Requests for Information (“RFI”), control of Engineering Change Notices (“ECN”) and red lines, and timely resolution of Non-Conformance Reports (“NCR”)., • Assist in the creation and management of the following:, • Project Scope Document and participate in the procurement of all stakeholder signatures., • Project Execution Plan and participate in the stakeholder approval process., • Risk Register and participate in the stakeholder approval process., • Assist in the engagement of the Company’s:, • Corporate Properties group in the project and communicate directly to ensure that the project's needs for temporary/permanent easements., • Legal group in the Project and communicate directly to ensure that project needs are established and met. Qualifications & Requirements • 10 - 15 years of professional experience in the Utility Environment., • Bachelor’s degree in a technical field: engineering, project management, construction management., • Software skills: MS Office Products at a minimum, industry-related software products., • Demonstrates project management experience., • Basic working knowledge of electric distribution systems, and civil construction., • Knowledge of specification and contract enforcement, applicable technical standards, OSHA, and other regulatory statutes., • Knowledge of trade agreements, procedures, techniques, work methods, and standards used in the construction industry., • Administrative skills for effective monitoring of contractor progress, cost control, and contractual interpretation matters. Preferred Qualifications • Membership in a professional organization such as AACE, ISPE, etc., • Professional credentialing (CCT or CCP, CST or CSP, EVP, CMIT or CCM, PMP, EIT)., • SAP experience. Context, Environment, & Safety • A safety-minded individual who must comply with the IPS Mission Zero Safety policy., • Capable of working alone or as part of a team without a significant level of supervision., • The employee is frequently required to stand, walk, and sit for extended periods with extended computer use., • Experience working in both a Home Office and a Field environment., • Travel to client sites as needed. This position is a safety-sensitive position. The employee is designated for field work and attends activities at client sites where they work in construction, process, packaging, manufacturing, research, or other "non-administrative" areas. All interviews are conducted either in person or virtually, with video required. About Us IPS, a Berkshire Hathaway company, is a global leader in technical consulting, architecture, engineering, procurement, construction management, commissioning, qualification, and validation services for technically complex facilities. Integration is how we think and work. It requires the ability to unite existing and emerging technologies into a process that reliably delivers products and accelerates speed to market. That end-to-end mindset allows us to be agile and anticipate challenges as we move projects toward operational readiness. IPS applies design and delivery expertise, client-side experience, and supplier-side insight to every project. We infuse our curiosity, our passion, and our commitment to partnership in delivering solutions at any scale. We meet our clients where they are and get them to where they need to go. That’s only possible when we care as much as our clients do. Specialties Process Architecture, Process Design, Engineering, Construction, Commissioning, Qualification, LEAN Project Delivery, Strategic Master Planning, Energy Conservation Management, Project Controls, Program/Project Management, Operations/Logistics Strategy and Planning, EPCMV, and Staffing Services. All qualified applicants will receive consideration for employment at IPS without regard to race; creed; color; religion; national origin; sex; age; disability; sexual orientation; gender identity or expression; genetic predisposition or carrier status; veteran, marital, or citizenship status; or any other status protected by law. IPS is proud to be an affirmative action and equal opportunity employer. Connect With Us! If you do not meet the qualifications for this specific role, but would like to submit your resume for general consideration, please click here!

Summary: The Senior Manager, Engineering, Facilities & EHS is responsible for maintaining all manufacturing equipment, utilities, facilities, and environmental, health & safety programs to ensure continuous, compliant production. This role manages capital projects, utilities operations, facility maintenance, safety programs, engineering documentation, and regulatory compliance under cGMP, OSHA, EPA, and state requirements. Responsibilities are carried out personally and through subordinate engineering and maintenance staff. Key Responsibilities: • Maintain manufacturing equipment, utilities, and facility infrastructure (HVAC, purified water, compressed air, cleanrooms, BMS/EMS)., • Oversee facility services, housekeeping, and maintenance operations across all areas., • Plan and coordinate repairs, preventive maintenance, shutdowns, and utility outages., • Lead capital projects, equipment installations, facility upgrades, and construction activities., • Manage contractors, vendors, service providers, and external engineering firms., • Develop and manage annual CapEx budgets and cost-saving initiatives., • Identify and implement automation solutions (robots, cobots, advanced technologies)., • Create and execute validation protocols (DQ/IQ/OQ/PQ) for equipment and facilities., • Manage engineering SOPs, work order systems, preventive maintenance, and spare-parts programs., • Perform risk assessments, gap assessments, data analysis, and support change control/CAPA., • Manage all OSHA and environmental compliance programs (LOTO, HAZCOM, PPE, hazardous waste, water/air requirements)., • Conduct EHS audits, incident investigations, root-cause analysis, and corrective actions., • Lead safety training, emergency response, fire protection, and environmental monitoring activities., • Supervise and develop engineering, maintenance, and facilities staff., • Coordinate cross-functional technical support and training., • Prepare and present reports on budgets, facility spending, and project status., • Support FDA, OSHA, EPA, DEP, and internal audits and maintain compliance documentation. Qualifications & Experience: • Bachelor’s degree in Engineering or equivalent experience, • 5–10 years in engineering, facilities, or regulated manufacturing, • Strong knowledge of cGMP (21 CFR 110/111/210/211), OSHA, and environmental regulations, • Experience managing maintenance, facilities, contractors, and capital projects, • Understanding of utilities systems, validation (DQ/IQ/OQ/PQ), preventive maintenance, automation/robotics, and asset management

Job DescriptionSalary: $25-45 DOE Summary: Esposito Construction is seeking anEquipment Operatorwith field experience for various job sites across the state. Specifically we are looking for team members in NJ. Candidates must have experience running loaders, dozers, excavators and various other machines. Candidates must also have knowledge of site work, earth moving, and utilities installation. Experience with pipe and/or utility work is a plus. We are seeking someone who is motivated, hands-on, self-starter with a proven track record. Benefits: • Medical Insurance paid by Esposito Construction for single rate., • 401(k) eligibility with company contribution., • Dental insurance eligibility., • Vision insurance eligibility., • Paid time off., • Pay: Flexible, experience based $25-40 DOE Responsibilities: • Operating equipment and heavy machinery, • Participating and helping plan day to day crew operations, • Communicating with sub-contractors, • Coordinating equipment and materials required for work assigned, • Providing input for daily and weekly reports for the job, • Adhering to timelines and communicating when necessary if delays are anticipated, • Maintaining and helping grow our safety culture Qualifications: • Must be able to work in team setting, • Pipe experience preferred but not required, • Physically capable to work on your feet and lift/move material productively, • Must have a good pair of work boots, • OSHA 10 and/or 30 Preferred Esposito Construction LLC is an Equal Opportunity-Affirmative Action Employer Minority / Female / Disability / Veteran / Gender Identity / Sexual Orientation / Age

Job Description Job Description Date 10/2025 Location 1200 Airport Road, North Brunswick NJ Title Technician, R&D Formulation Department Research & Development Reports to Director, Research & Development FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Formulation Technician is responsible for supporting the formulation and manufacturing processes by accurately weighing, mixing, and processing raw materials in accordance with Standard Operating Procedures (SOPs), Good Manufacturing Practices (cGMP), and batch documentation requirements. This role involves hands-on operation and maintenance of various pharmaceutical production equipment and requires close adherence to quality, safety, and regulatory standards. Areas of Responsibility Technician, R&D -Level 1, Works under close supervision; learns formulation procedures, documentation, and equipment operation. Technician, R&D -Level 2 Works independently on complex formulation and scale-up activities; may train junior staff Technician, R&D -Level 3 Operates with minimal supervision; recognized technical expert and mentor within the R&D team. Develops and updates SOPs, batch records, and training materials. Oversees equipment readiness, preventive maintenance, and calibrations. Mentors’ technicians and ensures high-quality documentation and compliance. Supports technology transfer and production readiness reviews Key Responsibilities Level 1, 2 & 3 • Accurately weigh and transfer raw materials using calibrated balances and scales in accordance with approved batch records and formulation guidelines., • Perform formulation and manufacturing activities for pilot, scale-up, and commercial batch production., • Operate equipment for mixing, blending, granulation, and other material processing functions in support of pharmaceutical product development and manufacturing., • Complete and maintain accurate, compliant, and timely documentation, including Batch Manufacturing Records (BMRs), Logbooks, Protocols, and related forms in accordance with cGMP and SOP requirements., • Assist in the development and optimization of formulations for various dosage forms such as tablets, capsules, and granules, under the direction of senior formulation scientists or supervisors., • Independently execute and monitor benchtop, pilot-scale, and manufacturing scale-up batches with minimal supervision., • Set up, operate, clean, and perform changeovers on R&D and pilot-scale manufacturing equipment, including but not limited to:, • Tablet Presses, • Capsule Filling Machines, • Coating Machines, • Granulators, • Fluid Bed Dryers (FBDs), • Ensure equipment is properly maintained, sanitized, and operated in compliance with SOPs, safety protocols, and current Good Manufacturing Practices (cGMP)., • Proactively identify and troubleshoot issues during formulation development, demonstrating strong problem-solving skills and an ability to anticipate potential risks or failures., • Adhere strictly to all company policies, safety guidelines, and regulatory requirements., • Participate in routine housekeeping, equipment cleaning, and 5S/continuous improvement initiatives to maintain a safe and efficient working environment., • Perform additional duties and responsibilities as assigned by management to support departmental and organizational goals. Requirements Education & Qualification: Technician, R&D -1 • Requires High School diploma or GED, Associate degree preferred., • 1 to 4 years of experience working in a nutraceutical/pharmaceutical, biotech, or food manufacturing environment, regulated by GMP standards and requirements., • Specific experience in oral solid dosage manufacturing, blending, compression, pan coating, fluid bed, or encapsulation manufacturing processes will be a plus. Technician, R&D -2 • Requires High School diploma or GED, Associate degree preferred., • 6 to 10 years’ experience working in a nutraceutical/pharmaceutical, biotech, or food manufacturing environment, regulated by GMP standards and requirements., • Specific experience in oral solid dosage manufacturing, blending, compression, pan coating, fluid bed, or encapsulation manufacturing processes. Technician, R&D -3 • Associate’s or Bachelor’s degree in Chemistry, Biology, Engineering, or related scientific field, • 3 to 12 years’ experience working in a nutraceutical/pharmaceutical, biotech, or food manufacturing environment, regulated by GMP standards and requirements., • Requires hands-on experience or knowledge to set-up & operate Tablet, Capsule, Granulation manufacturing process equipment such as Tablet Press, Capsule Filling, Coating, Granulator, Fluid Bed Dryers, etc. and the ability to troubleshoot this equipment., • Utilizes problem-solving skills to investigate and troubleshoot product issues and recommend solutions for issues such as sticking, picking, capping, chipping, compressibility, delamination, etc., • Works independently or in a team assisting others., • Performs basic math calculations and follow written instructions with accuracy and pay attention to detail., • Able to follow and understand cGMP, OSHA standards etc., • Able to distinguish different shades of colors., • Intermediate user of MS Office, Excel, Word, and Outlook, • Complies with all regulatory/ in-house requirements (may include but not be limited to safety, housekeeping, laboratory chemical waste, cGMP’s, GLP, documentation) when performing the assigned activity., • The employee is frequently required to sit (50%), stand, and walk (50%) at a lab bench., • Able to lift up to 35 lbs.; occasionally lift and move up to 50 pounds., • Able to stand and walk on the production floor a minimum of 6 hours per shift., • Uses hands to finger, handle or feel, or to operate or to control objects. Able to lift up to waist height and/or above shoulder height, frequent bending from waist, or squatting, walking short distances., • Able to occasionally work on a rolling ladder or step stool, or to lean over equipment as well as kneeling on the floor to clean under the equipment., • Work is regularly performed inside a laboratory environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment.

Job Description • Coordinate and assure performance of weekly, monthly, quarterly, semi-annual and annual preventative maintenance schedules., • Visually inspect all common areas on a daily basis to ascertain maintenance needs., • Review the maintenance log and prioritize the work assignments., • Prepare work schedules and follow up for maintenance personnel by managing and delegating the work orders and maintaining schedules., • Screens, interviews, hires, trains, evaluates, counsels, disciplines and terminates departmental personnel., • Provide all in-service education of maintenance department personnel to provide prompt, efficient, effective and high-quality results in departmental functioning., • Set up periodic inspections of the total property systems of checking such items as roof, building façade, parking lots, grounds, signs, etc., and report finding and repair needs to Executive Director., • Initiate, supervise and maintain an up-to-date repair record on all equipment and maintain an up-to-date work list for the job and ensure all work is completed in a timely and effective manner with respect to assigned priorities., • Initiate a training program to insure training is implemented and completed by all maintenance personnel, inspects all fire fighting equipment according to time period and instruction required by law., • Operate and maintain all buildings and grounds, all security and transportation systems in accordance with Federal, State and local OSHA standards., • Follow all workplace injury procedures, including completion of reports for timely reporting and issuing corrective action when necessary., • Adhere to and uphold company policies and procedures., • Operate within the department budget., • Maintain all files and records consistent with the adequate functioning of the departments., • Inspect all work in progress and/or completed by staff or outside contractors and maintain cleanliness checklists., • Inspect vacated apartments and complete the painting, repair and general refurbishment within the prescribed time frame., • Form a Safety Committee to inspect all buildings and grounds to protect the residence against loss and/or liability resulting from the operation and maintenance of the area., • Respond to maintenance emergencies at any time needed., • Coordinate the selecting, bidding, ordering and controlling of inventory for maintenance, repair and supplies, ensuring quality at a competitive price., • Maintain grounds and outside areas of building, including and not limited to: sprinkler system, outside lights, driveway and parking lots, in a clean and working condition., • Assist with other duties as requested by Administration., • Continuing knowledge development regarding maintenance methods, chemicals and standards.

Job Description Role Overview The Maintenance Technician & Trainer is responsible for advanced troubleshooting, repair, and maintenance of manufacturing and Packaging equipment, while also serving as a mentor and trainer for mechanics and operators. This role combines technical expertise with leadership, ensuring production continuity, conducting hands-on training sessions, and developing team skills in equipment operation, preventive maintenance, and troubleshooting. The position remains fully engaged in floor operations and is not exempt from performing direct technical work. Areas of Responsibility Technical Trainer: • Needs Assessment: Evaluate skill gaps in maintenance, mechanical/technical and machine operator teams and recommend or propose appropriate training., • Training program Development: Design and develop comprehensive training programs which outline the contents of the training along with instructional materials and training aids to teach individuals complex technical skills on equipment., • Training Delivery: Conduct on the Job training sessions including interactive troubleshooting sessions to teach technical concepts and practical skills to both maintenance and operational team members., • Program evaluation: Monitor and analyze the results of training programs and sessions to assess their effectiveness, gather feedback, and make necessary adjustments., • Attend FAT: Attend Factory acceptance testing for new equipment at manufacturers’ site, requires traveling both locally and internationally., • Support Equipment Installations & Validation: Provide support for new equipment installation by coordinating and working closely with manufacturer technicians and installers for the installation, commissioning and validation of new equipment while learning the new technology as well., • Trouble shooting: Assist in troubleshooting complex technical and mechanical issues on packaging and processing equipment., • Foster Teamwork: Maintain a work environment that supports teamwork and continuous process improvement., • Preventative Maintenance Coordination: Work closely with maintenance team to establish robust and effective preventative maintenance practices., • Document development: Assist in the creation of Preventive maintenance procedures and SOPs. Quality • GMP Compliance: Maintain proper growing and hygiene to ensure product integrity according to cGMPs and company policies., • Procedure Adherence: Follow batch records, SOPs, and cGMP guidelines to meet product specifications and tolerances., • Policy and Procedure Compliance: Ensure full compliance with company policies, procedures, GMPs, Ethical Business Practices, and SOPs always., • Foster Collaboration: Create an environment that respects and values diverse backgrounds., • Effective Communication: Establish and maintain effective relationships with peers, team members, and senior managers to ensure clear communication., • Goal Setting: Align goals and objectives with the organization for self and direct reports, create action plans, set milestones, and deliver progress reports and development plans for team members., • Employee Development: Develop employees to contribute to daily operational success., • Cross-functional Support: Learn and understand specific Facilities and Engineering operations to provide support in other areas as needed., • Safety and Responsibility: Work safely and responsibly to create an injury-free and incident-free workplace., • Training Compliance: Comply with all job-related safety and other training requirements., • Communication with Management: Keep management informed of area activities and significant Issues., • Extended Hours: Work extended hours, and occasional weekend overtime as required. Education & Qualification: • Degree Requirement: BA/BS degree in mechanical engineering with 3+ years of field experience., • Industry Experience: Minimum of three (3) years of work experience in nutrition, supplements, food, or pharmaceutical manufacturing industries., • None Required Skills & Ability • Teamwork: Demonstrates ability to work collaboratively and assist others., • Precision: Able to follow written instructions precisely and perform basic math calculations as required., • Regulatory Knowledge: Understands and is knowledgeable of cGMP, OSHA standards, etc., • Communication Skills: Ability to explain complex technical concepts clearly and effectively to diverse audiences., • Process Knowledge: Knowledge of processes including Blistering, cartoning, solid dose packaging etc..., • Lifting: Ability to lift 50 lbs. and occasionally lift and move up to 75 pounds., • Mobility: Must stand and walk on the production floor for a minimum of 6 hours per shift., • Manual Dexterity: Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, squatting, and walking short distances., • Flexibility: Occasionally works from a rolling ladder or step stool, able to lean over equipment, and kneel on the floor to clean under the equipment., • Manufacturing Setting: Work is regularly performed inside a manufacturing environment where temperatures can be moderate. Exposure to dust, odors, noise, and fumes is common. The noise level is usually moderate., • Chemical Exposure: Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment.

Job Description Sales Executive – Paragon Staffing Location: North Brunswick, New Jersey Employment Type: Full-Time Salary/Compensation: $50,000 - $60,000. (Uncapped high earning commission) Paragon Staffing is growing, and we’re looking for a driven Sales Executive to join our team. If you thrive in building relationships, developing new business, and driving growth, this is your opportunity to make a direct impact while having the freedom to shape your own territory. About Paragon Staffing We specialize in two core staffing sectors: Warehouse & Distribution Staffing Providing reliable, skilled workers who keep supply chains moving. Positions include forklift operators, pickers/packers, shipping & receiving, inventory control, supervisors, and more. From seasonal surges to long-term workforce needs, Paragon ensures smooth, compliant, and productive operations. Environmental Staffing Services Delivering highly trained professionals for complex projects with strict safety requirements. Our teams include OSHA 40-hour HAZWOPER technicians, confined space crews, spill response units, and specialists in tank cleanings, hazardous material handling, oil spill response, and flood recovery. Safety and compliance are always at the core of our services. What You’ll Do * Develop and maintain strong client relationships across both sectors. * Identify staffing needs and present tailored solutions. * Drive new business through prospecting, networking, and client visits. * Partner with recruiters to deliver top-quality candidates and staffing solutions. * Meet and exceed sales targets while providing exceptional service. What We’re Looking For * Proven experience in sales, business development, or account management (staffing industry experience is a plus). * Strong communication and negotiation skills. * Ability to work independently and as part of a team. * Goal-oriented mindset with the drive to exceed expectations. * Reliable, professional, and eager to grow with a fast-paced company. Why Join Paragon Staffing? * Freedom & Growth: Build and manage your own territory with the support of a collaborative team. * Impact: Your success directly contributes to Paragon’s continued expansion in warehouse/distribution and environmental sectors. * Support: Access to training, recruiting resources, and leadership guidance. * Culture: We prioritize transparency, safety, and over-delivering for our clients. Powered by JazzHR ZmGRSv9nPh

Job DescriptionDescriptionA great place to work and grow, Naik Group is a dynamic, multi-discipline engineering company with offices in New York and New Jersey. Our continued growth in this highly competitive market is evidence of the trust and value clients place in our services’ quality and timeliness. Included in the full range of professional services we offer are Bridge/ Structural Design & Inspection, Highway/Roadway Engineering, Civil/Site Engineering, Traffic Engineering/ITS, Utility Engineering, Construction Management & Inspection, Design Build, Survey, Right of Way, and High Definition 3-D Laser Scanning. Our principals take considerable pride in their approach to the firm’s management, offering services like that of a large organization while demonstrating the personal client and consultant relationship of a small firm. Naik Consulting Group is currently seeking a Senior Construction Inspector for a NJDOT / NJTA project in Central NJ. Naik is a New York-New Jersey engineering services firm which specializes in engineering design, field inspection, and Project Management/Construction Management, primarily in the transportation infrastructure industry. Responsibilities • Monitors contractor operations and verifying conformance with project plans and specifications, • Serves as the on-site highway inspector for construction work performed by the contractor and subcontractors., • Interacts with the construction contractor’s site supervision on field activities to ensure compliance with the construction contract requirements, • Prepares daily reports, correspondence, change orders, periodic payment estimates, and quantity computations, • Observes details of work performed by others, documenting results; obtaining photographic documentation of work performed, • Confirms compliance with technical documents and industry-specific standards and codes, • Reviews and downloads field data into laptop computer and transfer to company server, • Discusses projects with project team on a daily basis, • Makes accurate judgment-calls on a variety of construction field activities, • Performs other like duties, as assigned Qualifications • Bachelor’s degree in Civil engineering is preferred, • NICET Level III in Highway Construction certification is required, • ACI, TCC, CCTC, and NJSAT certifications required, • 5+ years of experience in highway construction inspection, • Experience with NJDOT / NJTA projects required, • OSHA 10-hour safety course is required, • Excellent written and verbal communication skills, • Good time-management skills, • Ability to perform under pressure, • Good skills in Microsoft Excel, Word and Powerpoint, • A strong attention to detail is necessary. BenefitsNaik offers a competitive compensation package including: • Holiday and paid-time-off programs, • 401(k) Plan and Match, • Career Path Development Program (Management & Technical Career Tracks), • Tuition Reimbursement, • Competitive health and dental insurance premiums, • Short-Term Disability/Long-Term Disability, • Life insurance, • Employee Assistant Program (EAP), • Flexible Spending Account, • and MoreNaik is a Drug and Alcohol-Free workplace, an Equal Employment Opportunity employer and E-Verify employer. We are committed to pay transparency and fairness in hiring. This posting complies with the Pay and Benefit Transparency Laws, which requires employers to disclose compensation and benefits information in all job advertisements.

Job Description Job Description • Provides on-site field administration/supervision and technical management for all construction operations, including direct supervision of Assistants, Foreman, subcontractors, and other construction related personnel., • Ensure timely project completion through project scheduling and coordination and expediting of material deliveries., • Responsible for all site activities (plan and specification adherence, quality of work, safety, and overall coordination)., • Assist Project Management and Preconstruction with development of the initial CPM schedule. Develop and maintain the project Three Week Look Ahead Schedule. Update, maintain, communicate, and manage all subcontractors and vendors to the schedule., • Develop, control, maintain, and enforce a project site logistics plan and temporary facilities plan., • Develop, implement, maintain, and enforce a project specific quality assurance and quality control program., • Perform and monitor all project control reporting measures including daily reports, quality assurance reporting, accident and incident reports (theft/fire/vandalism/accident), Safety and Erosion and Sediment Control Reports., • Perform or manage the site orientations with all subcontractors, vendors, etc., • Oversee and ensure compliance with CCIP program requirements including confirmation of subcontractor enrollment, accident/incident reporting, site inspections and the like., • Have a working knowledge of all project plans, specifications, Owner Contract, Subcontracts, Purchase Orders, daily correspondence, RFI’s, shop drawings, submittals, and all other project related documents, and maintain a complete and accurate set of as-built documents., • Oversee all layout and field engineering in accordance with all project requirements., • Coordinate daily construction activities within existing operating facilities., • Develop and execute a plan for monitoring and completing punchlist items., • Ensures that Safety Orientations occur for all subcontractors., • Inspect the site and check for OSHA violations and unsafe practices and conditions., • Assist and work closely with the Project Manager with all field related activities., • Instrumental with the implementation and interpretation of safety programs., • Ensure all company, department, and technical policies, procedures, standards, etc. are adhered to., • Prepare and maintain all required documentation and records according to State and Federal compliance as well as company procedures., • Notification of all subcontractors and vendors of job status and upcoming responsibilities., • Manage and oversee all third-party Inspections (Township, State, financing institutions, environmental, health department, etc.)., • Coordinate all third-party on-site testing (soils, concrete, steel, masonry, fireproofing, etc.).Notify Architects/Engineers of required/needed inspections., • Conduct weekly foreman meetings (safety, work procedures, site storage and staging)., • Maintain a clean and organized site and trailer/office. Skills & Requirements • Preferred four (4) year degree in a construction-related curriculum or equivalent experience in field-related duties, including any accredited apprentice programs., • 7+ years of experience with a commercial contractor or equivalent industry experience., • Demonstrated leadership ability of project teams with successful outcomes., • In depth knowledge of the construction process including scheduling, contract administration, equipment, and manpower., • Proficient in basic use and functions of a personal computer., • Experience with construction related software (i.e., Primavera, Procore or Microsoft Office) preferred., • OSHA 30-Hour

Job DescriptionDescription: The Plant Engineer position will be responsible for leading engineering and maintenance activities at a site. Working under limited supervision, the Plant Engineer maintains production and quality by ensuring operation of machinery and the condition of the site. This position oversees skilled Technicians to maintain the facility, including grounds, buildings, equipment, and assets. The Plant Engineer will need to ensure compliance with safety, regulatory, and plant reliability to align equipment availability with operating requirements. Requirements: Essential Functions: • Create a high level of equipment availability through Planned Maintenance to minimize unscheduled repairs or equipment failures as measured by the departments KPI’s., • Through daily huddles and technician coaching sessions, maintain consistent communications with plant operations for scheduling, planning, and training purposes. Meet or exceed agreed KPI’s and individual goals., • Ensures Maintenance and Project expenses and objectives under span of control are met and on budget., • Use Lean concepts to identify and implement continuous improvement and systematic problem solving to remedy root causes for improved plant performance., • Coordinates activities with management to review planned maintenance, projects, objectives, timelines, and communications within the plant., • Responsibilities may include performing research, designing smaller or large projects within financial and operational scope, and implementing these projects, or sub-sets of complex projects., • Mentor and support the development of facility operations and maintenance personnel., • Delivery and support of cost saving initiatives to accomplish productivity targets., • Active support and participation in driving reliability and safety initiatives through root cause analysis, idea generation and task execution., • Oversees Maintenance Technicians and provides ongoing training to maximize the efficiency of the work force and meet operational requirements., • Process safety stewardship in all aspects; change management, hazard analysis and abnormal situation management., • Provides mechanical maintenance information by answering questions and requests and ensures operation of machinery by completing preventive maintenance requirements by following diagrams, sketches, manuals, manufacturer's instructions, and engineering specifications and troubleshooting malfunctions., • Maintains a safe and clean working environment by complying with site level Environmental and OSHA procedures, rules, and regulations. Upholds site level Environmental and OSHA records and reports as appropriate., • Strong leadership and interpersonal skills, project management, organization, decision making ability, relationship building and interfaces well with others. Specific skill-based competencies required to satisfactorily perform the functions of the job include adhering to safety practices; and operating equipment used in technical maintenance trades., • Ability to present information to others. Specific knowledge-based competencies required to satisfactorily perform the functions of the job include safety practices and procedures, and advanced fundamentals of MEP and general building preservation., • The ability to stand, sit and/or walk repeatedly throughout most of the workday., • When in the plant, subject to the outside environment with possible exposure to extreme temperatures (heat, cold, humidity, etc.)., • Position is occasionally exposed to fumes, odors, dust, mists, airborne particles, chemicals, heights, cramped quarters, oil, grease and dirt., • Normal lifting of up to 50 pounds is possible., • Mobility is necessary in order to perform assigned functions., • Noise level is moderate to heavy as the work area is a production environment., • Position requires the ability to occasionally work different shifts to monitor plant performance., • BS in Engineering preferred with a minimum of Five years’ experience in manufacturing systems or Ten plus years of experience leading a Technical team in a manufacturing environment., • Black Seal High-Pressure Boiler Operator license., • This position requires the knowledge of hydraulics, pneumatics, electrical, electronics (PLC), hydraulics, heating ventilation, air conditioning, carpentry, welding, machining and fabricating. The position also requires proficiency in troubleshooting the before listed categories., • Technical knowledge of maintenance equipment and capital project activities and experience leading associates of various skill levels required. This description does not state or imply that the duties listed above are the only duties to be performed by the Associate. Associates are required to follow job-related instructions and perform other job-related activities requested by their supervisor. All requirements are subject to possible modifications in order to provide a reasonable accommodation to individuals with physical or mental disabilities as defined in the Americans with Disabilities Act. Some requirements may exclude individuals who pose a direct threat or significant risk to the health and safety of themselves or other Associates. Nixon Medical is an equal opportunity employer. #IND2

Job Description Job Title: Registered Dental Assistant Department: Operations Reports to: Dental Practice Manager FLSA Status: Non-Exempt Company Overview ProSmile is one of the fastest-growing dental organizations, with a vast network of multi-specialty practices across New Jersey, Pennsylvania, Virginia, Michigan, Illinois, Wisconsin, Indiana, Washington D.C., and Maryland. Our practices are led by top-tier dentists who are committed to providing exceptional patient care while offering a supportive environment for dental professionals to thrive. We focus on delivering personalized, gentle care to our patients and creating a collaborative workplace with opportunities for mentorship, growth, and ongoing training. Position Summary As a Registered Dental Assistant, you will help support the clinical needs of our patients and doctors. The duties of a Dental Assistant are very important for the functionality of our dental offices. These duties can include patient care, recordkeeping, and appointment scheduling. As a Registered Dental Assistant, you will work under the supervision of dentists and work closely with dental hygienists in their day-to-day activities. Duties and Responsibilities The duties include, but are not limited to: • Clearly demonstrate knowledge of dental instruments and assist the dentist in rendering patient care chairside., • Maintaining inventory control in the operatories where treatment is rendered by the Provider, • Adhering to OSHA, HIPAA, and CDC guidelines, • Deliver world class patient interactions related to scheduling, follow up treatment, post-surgical information and record keeping, • Be able to perform basic lab procedures such as taking impressions, pour models, and preparing cases for external labs., • Remove excess cement from crowns or other restorations and orthodontic appliances;, • Fabricate and cement temporary crowns and bridges after preparation of tooth (teeth) by a dentist., • Placing and removing rubber dam and clamp., • This does not include intra-oral occlusal adjustment;, • Trial size (pre-select) orthodontic bands, wires, stainless steel crowns and temporary crowns intra-orally or on diagnostic models;, • Place and remove arch wires and ligature wires, • Remaining items that are within the scope of Registered Dental assistant., • Maintaining public area appearance, • Performs miscellaneous job-related duties as assignedQualifications, • High School diploma or GED required, • Easily able to learn new technologies and systems required and demonstrates a desire to learn, • Applicable licensing required for the state in which you will work: Dental Radiologic Technologist (DRT) license or willing to pursue licensure immediately required., • Certified Dental Assistant certificate preferred, • Registered Dental Assistant License preferred, • 1+ years work experience as a Dental Assistant preferred, • Ability to work in a fast-paced environment, • Requires some flexibility in scheduling, such as the ability to work evenings and weekends as needed, • X-ray License required, • Current NJ Registered Dental Assistant license, • Active CPR Certification is required.Knowledge and Skills/Expected Competencies, • Knowledge of dental instruments and patient care., • Ability to clearly communicate medical information to professional practitioners and/or the general public., • Excellent organization, prioritization, follow up, analytical and time management skills with ability to handle multiple priorities and deadlines. Benefits Summary At ProSmile, we are committed to supporting the health and well-being of our employees and their families. We offer the following benefits for Full Time Benefits Eligible Positions (35+ hours per week) and Part Time Benefits Eligible Positions (30-35 hours per week): • Medical Insurance: Choice of five comprehensive Aetna medical plans, including options with low copays, deductible-sharing, and national provider networks., • Dental Insurance: MetLife plans offering preventative, basic, major, and orthodontic coverage options., • Vision Insurance: Davis and UHC vision plans with annual exams, eyewear allowances, and contact lens benefits., • Flexible Spending & Health Savings Accounts: Pre-tax savings accounts for medical, dependent care, and healthcare expenses., • Life & Disability Insurance: Employer-paid basic life and AD&D insurance, with voluntary life, short-term, and long-term disability plans., • Additional Perks:, • Employee Assistance Program (EAP), • Identity Theft & Fraud Protection, • Legal Support Services, • Discount Programs (including pet insurance, travel, theme parks, electronics, etc.), • Wellness Programs The Company reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between the Company and the employee. Equal Employment Our culture encourages individual development, embraces an inclusive environment, rewards innovative excellence, and leads in provider and patient satisfaction. Prosmile values diversity, inclusion, and equity as matters of fairness and effectiveness. We are committed to hiring and retaining a staff that reflects the diversity of the communities we serve, fostering an inclusive working environment where staff of all backgrounds feel welcomed and engaged. ProSmile is an Equal Opportunity Employer and encourages applications from individuals underrepresented in the medical sector, including people of color, and persons with non-traditional work and educational experience. All who believe they meet the stated qualifications are invited to apply. Company Safety We believe that the best care for our patients starts with the best care for our employees. ProSmile is committed to proactively creating and maintaining an environment that is safe for our team and patients. Employees are required to wear Personal Protective Equipment (PPE) including face masks, gloves, gowns, and more as needed and in accordance with CDC standards. Powered by JazzHR sbuUctIu24

Job DescriptionConstruction / Restoration Operations Field Manager A rapidly expanding service-based company is seeking an experienced Manager to oversee and coordinate our damage mitigation operations. This leadership position operates in a fast-paced, dynamic environment where your expertise will be essential in driving operational efficiency, ensuring top-tier service delivery, and fostering the growth and success of your team. We are looking for a strong, hands-on leader who thrives in an environment where no two days are the same, and who is passionate about delivering exceptional service to customers during challenging times. The right candidate will have a solid background in construction, with the ability to jump in on-site when needed, direct crews in the field, and ensure projects are executed to the highest craftsmanship standards. Position Overview The Mitigation Manager will be responsible for supervising and guiding a team of technicians in responding to property damage caused by water or mold. This role requires a proven ability to manage operations efficiently, ensure compliance with safety and quality standards, and maintain excellent customer relations. A strong knowledge of construction practices, and jobsite safety protocols is essential. The ideal candidate will be proactive, detail-oriented, and highly skilled in both technical and leadership aspects of mitigation work. Key Responsibilities • Lead, motivate, and coach the mitigation team to ensure top-tier performance and customer satisfaction., • Oversee the day-to-day operations of mitigation projects from start to finish, ensuring timely completion., • Actively participate in on-site inspections, ensuring proper construction methods are applied., • Develop and implement workflow processes that maximize efficiency while upholding safety and quality standards., • Monitor job progress, resolve issues promptly, and ensure that all work meets established timelines and customer expectations., • Participate in hiring, onboarding, and training of new team members., • Collaborate closely with other department managers to coordinate resources and maintain seamless job execution., • Provide ongoing performance evaluations and feedback to team members., • Oversee inventory control and ensure equipment is properly maintained and available., • Be available for operational support during emergencies, including after-hours when needed., • Ensure compliance with OSHA and other jobsite safety regulations., • Bachelor’s degree or equivalent work experience required., • 2–5 years of management experience in construction, or a related field., • Prior experience in the mitigation and restoration industry is preferred., • Hands-on construction experience strongly preferred., • Strong understanding of financial reporting, job costing, and resource allocation., • Demonstrated leadership skills, • Excellent problem-solving abilities, communication skills, and attention to detail., • Ability to manage multiple priorities in a fast-paced environment., • High energy and a positive, motivating presence., • Integrity and professionalism in all aspects of work., • Strong time management and organizational skills., • A customer-first mindset with the ability to remain calm under pressure., • Medical, Dental, and Vision Insurance, • Paid Time Off (PTO), • 401(k) with company match, • Life Insurance, • Short-term and long-term disability coverage If you are a dedicated leader with a passion for construction, and helping others during times of need, we encourage you to apply for this exciting opportunity.

Job Description Job Title: Maintenance Supervisor Job Description We are seeking a proactive Maintenance Supervisor to lead and manage a comprehensive Preventative Maintenance (PM) program using MP2 systems. The successful candidate will be responsible for directing maintenance projects to optimize production efficiency and minimize downtime, while collaborating closely with operations leadership to align repair schedules with production needs. Responsibilities • Manage and oversee a comprehensive Preventative Maintenance (PM) program using MP2 systems., • Direct maintenance projects to optimize production efficiency and minimize downtime., • Collaborate with operations leadership to align repair schedules with production needs., • Ensure maintenance staff have the tools, materials, and training required to perform effectively., • Provide on-site guidance, troubleshooting, and technical support to maintenance personnel., • Analyze processes and implement strategies to improve efficiency and reduce costs., • Oversee hydraulics, pneumatics, electrical, and mechanical repair activities., • Manage staffing, scheduling, and resource allocation for daily, weekly, and monthly maintenance., • Conduct performance appraisals, coach team members, and handle disciplinary actions as needed., • Lead process improvement initiatives and foster a cooperative, team-oriented environment., • Ensure compliance with company policies, OSHA, and safety standards., • Prepare reports, attend meetings, and communicate effectively with leadership., • Directly supervise a team of 25 employees in the Maintenance Department., • Responsibilities include hiring, training, scheduling, performance management, and employee relations., • Bachelor’s degree required; equivalent combination of education and experience considered., • 3–4 years of related maintenance management or supervisory experience., • Strong leadership and interpersonal skills., • Proficiency in Microsoft Word, Excel, PowerPoint, and MP2., • Knowledge of hydraulics, pneumatics, electrical, and mechanical systems. Enjoy a supportive and collaborative team environment with room for growth and development. Benefit from a sign-on bonus, perfect attendance bonus, and direct access to Europastry Benefits. Indulge in free pastries while contributing to a dynamic and innovative workplace. Work Environment Experience a fast-paced manufacturing environment with exposure to noise, machinery, and variable conditions. Apply common sense and problem-solving skills to complex maintenance challenges and be adaptable to changing production needs while managing multiple priorities. Job Type & Location This is a Permanent position based out of New Brunswick, NJ. Pay and Benefits The pay range for this position is $130000.00 - $145000.00/yr. Health Coverage: Medical, dental, and vision insurance Financial Security: 401(k) with company match, life insurance, disability coverage Time Off: Paid vacation, holidays, and sick leave Career Growth: Training, development programs, and opportunities for advancement Work-Life Balance: Shift differentials (if applicable), employee assistance programs Extras: Workplace Type This is a fully onsite position in New Brunswick,NJ. Application Deadline This position is anticipated to close on Dec 26, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Diesel Mechanic Job Description We are looking for a skilled Diesel Mechanic to join our team at Pinto Brothers Disposal. As a Diesel Mechanic, you will be responsible for performing maintenance and repairs on our fleet of diesel-powered vehicles, including garbage trucks and other heavy equipment. Perform inspection, diagnosis, preventative maintenance, repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment this includes diesel heavy trucks and engines. Utilizing diagnostic software, the Mechanic is responsible for interpreting failure modes and initiate or assign necessary repairs. At times, the Mechanic may be on call, and required to assist with emergency breakdowns. Responsibilities: • · Diagnose and repair mechanical, electrical, and hydraulic systems on diesel-powered vehicles and equipment., • · Perform routine maintenance, including oil changes, tire rotations, and brake inspections., • · Use diagnostic tools and software to identify and troubleshoot problems., • · Communicate with the operations team to ensure vehicles are serviced and maintained according to schedule., • · Maintain accurate records of work performed and parts used., • · Applicants must be at least 18 years of age and legally eligible to work in the United States., • · A valid driver’s license is required. CDL plus not required, • · Experience working on heavy duty diesel equipment OR training from a recognized trade school is required., • · Must be able to speak and read English well enough to converse with colleagues, drivers and dispatch, and be able to make legible entries on reports and records., • · Must be able to meet the physical and safety requirements of the position., • · Must be able to provide own tools, • · 2+ year’s experience working as a heavy duty Diesel Mechanic, • · Experience with troubleshooting/repairing DPF systems diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, CAT, Peterbilt, and Paccar., • · Working knowledge of applicable DOT and OSHA standards and regulations., • · Strong knowledge of diesel engine repair and maintenance. Pinto Brothers Disposal Company DescriptionPinto Brothers Disposal is a family owned and operated solid waste company established in 1980. We are a Central Jersey company that has been servicing Middlesex and Somerset Counties for over 40 years. We pride ourselves of giving all our customers dependable and professional disposal service. We serve and interact with homeowners, business, corporations, townships, Boards of Education, and management companies to help with their garbage and recycling needs.Pinto Brothers Disposal is a family owned and operated solid waste company established in 1980. We are a Central Jersey company that has been servicing Middlesex and Somerset Counties for over 40 years. We pride ourselves of giving all our customers dependable and professional disposal service. We serve and interact with homeowners, business, corporations, townships, Boards of Education, and management companies to help with their garbage and recycling needs.

Job Description We are seeking a dedicated and skilled Field Maintenance Technician to join our team. The ideal candidate will be responsible for performing inspections, troubleshooting, and repairs on a variety of material handling equipment, including hoists and overhead cranes, at our customer facilities throughout the Tri-State area. This role requires a technician with a strong background in both mechanical and electrical systems, excellent communication skills, and the ability to work independently or as part of a team. The Field Maintenance Technician will ensure the reliable and safe operation of critical equipment, providing top-notch service to our customers. Key Responsibilities: • Field Inspections & Preventive Maintenance: Conduct on-site inspections and preventive maintenance of hoists, overhead cranes, and other material handling equipment at customer locations in the Tri-State area., • Troubleshooting & Repairs: Diagnose and troubleshoot mechanical and electrical issues, providing prompt and efficient repairs on-site to minimize downtime and restore equipment functionality., • Electrical Expertise: Perform electrical troubleshooting and repairs, including diagnostics of wiring, circuits, motors, and control panels associated with overhead cranes, hoists and other material handling equipment., • Mechanical Repairs & Replacements: Perform mechanical repairs and replace components such as gears, motors, brakes, and structural parts of overhead cranes, hoists and other material handling equipment., • Customer Interaction & Communication: Provide exceptional customer service by clearly communicating with customers regarding service needs, explaining inspection findings and repairs., • Safety Compliance: Ensure all work is performed in compliance with safety standards and regulations, adhering to both company and OSHA safety protocols., • Documentation & Reporting: Maintain detailed and accurate service records, documenting all inspections, repairs, parts used, and any other relevant service information., • Emergency Service Response: Be available to respond to emergency service calls as needed, prioritizing critical issues and ensuring minimal downtime for customers., • Collaboration & Support: Work closely with internal teams and the customer support department to provide a seamless service experience, reporting issues and offering input for process improvements., • Problem-Solving: Proactively identify potential issues with equipment and systems and recommend or implement solutions to avoid unplanned downtime. Required Skills & Qualifications: • Experience: 3+ years of experience in industrial maintenance, with a focus on material handling equipment (hoists, overhead cranes, etc.)., • Mechanical Expertise: Strong mechanical aptitude with hands-on experience in hydraulic, pneumatic, and mechanical systems maintenance and repair., • Electrical Knowledge: Proficient in electrical troubleshooting, including the ability to diagnose and repair motors, circuits, wiring, and control systems., • Customer Service: Excellent communication and interpersonal skills with a customer-focused approach, ensuring positive interactions with clients., • Problem-Solving Skills: Strong ability to troubleshoot and resolve issues independently and efficiently, ensuring minimal equipment downtime., • Teamwork & Independence: Ability to work both independently and collaboratively within a team to achieve optimal results., • Safety Awareness: Comprehensive understanding of safety standards and procedures, with a commitment to maintaining a safe working environment., • Attention to Detail: High attention to detail, ensuring that inspections and repairs are conducted thoroughly and accurately., • Valid Driver’s License: A valid driver’s license with a clean driving record, as travel to customer sites in the Tri-State area is required. Preferred Qualifications: • Certifications:, • Crane maintenance certification or relevant industry certifications preferred., • OSHA 10 or OSHA 30 Certification, • Training:, • Comfortable working at heights at times, • Ability to travel regularly within the Tri-State area., • Competitive salary, • Health, dental, and vision insurance, • Paid time off (PTO) and holidays, • 401(k) non matching retirement plan, • Company mobile device for field service work, • Ongoing training and career development opportunities If you have the skills, experience, and motivation to excel in a dynamic, customer-focused environment, we encourage you to apply for the Field Maintenance Technician position. Company DescriptionA family owned company started in 1972 , we operate out of our Central NJ location in Hillsborough, NJ. Servicing all of the Northeast, we continue to expand our services across the country. Consisting of several divisions, we primarily focus on the design, fabrication, installation and servicing of material handling equipment. As an Executive Member of the Crane Manufacturers Association of America (CMAA), we provide equipment that is designed by qualified engineering personnel, manufactured with strict quality control processes, and installed by trained experienced technicians. Although designing, manufacturing and servicing of Overhead Cranes and Hoists is where it all started, we have complemented this sector of our business with a full Engineering and Project Management Division, Controls & Automation Division, Modernizations Division and Mechanical Contracting Division.A family owned company started in 1972 , we operate out of our Central NJ location in Hillsborough, NJ. Servicing all of the Northeast, we continue to expand our services across the country.\r\n\r\nConsisting of several divisions, we primarily focus on the design, fabrication, installation and servicing of material handling equipment.\r\n\r\nAs an Executive Member of the Crane Manufacturers Association of America (CMAA), we provide equipment that is designed by qualified engineering personnel, manufactured with strict quality control processes, and installed by trained experienced technicians.\r\n\r\nAlthough designing, manufacturing and servicing of Overhead Cranes and Hoists is where it all started, we have complemented this sector of our business with a full Engineering and Project Management Division, Controls & Automation Division, Modernizations Division and Mechanical Contracting Division.

Job Description Company Urgently Hiring Electricians!! Job Description This entry-level Electrical Junior Mechanic role involves assisting with the installation of lighting systems in warehouse facilities. The position requires working under supervision to ensure safe, efficient, and compliant electrical work. Responsibilities • Assist in the installation of lighting systems in warehouse facilities., • Work under supervision to ensure safety and compliance in electrical installations., • Collaborate with senior electricians and supervisors to complete projects., • Read and interpret blueprints and follow technical instructions., • Basic electrical installation and wiring skills., • Knowledge of lighting systems and fixtures., • Ability to read blueprints and follow technical instructions., • Safety awareness in warehouse and construction environments., • 1-6 years of electrical or construction experience preferred., • Familiarity with hand tools, power tools, and electrical equipment., • Understanding of OSHA safety standards and electrical codes., • Willingness to learn and grow under senior mentorship. This opportunity offers hands-on electrical experience in commercial settings, with mentorship and training from experienced electricians. There is potential for career growth in the electrical construction trades, all within a team-oriented environment that prioritizes safety. Work Environment The role takes place in a warehouse construction site setting. It involves physical work, including lifting, climbing ladders, and handling tools. You will be part of a collaborative team with clear supervision and guidance, working on fast-paced projects requiring accuracy and efficiency. Job Type & Location This is a Contract position based out of South Amboy, NJ. Pay and Benefits The pay range for this position is $22.00 - $32.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in South Amboy,NJ. Application Deadline This position is anticipated to close on Dec 22, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.