Trabajos osha safety en Buffalo, New YorkCrear alertas

What you will do Perform new installation commissioning and service activities on large scale, various manufacturers, Access Control, CCTV, Intrusion alarm and IP Intercom systems. How you will do it • oversee and inspect the installation of equipment to meet customer expectations and manufacturer specifications. Field coordination and communication, system programming, commissioning, AHJ testing and training on new system installations, • Evaluate and diagnose equipment that requires servicing as well as troubleshooting potential field wiring problems, • Provide specific solutions and recommendations to customers on the most efficient and cost effective method in restoring a specific system back to normal condition, • Manage assigned Electronic Systems service requests in regards to field labor hours estimated, • Customer satisfaction through coordination, response to customer requests and problems and clear communication skills, • Prepare reports on daily activities, • May be required to work minimal overtime as the work requires, • Read and understand complicated blueprints, diagrams, schematics, submittals, software/system programs, and operation/product manuals, • Required to lift and or carry equipment and tools, which may be over forty (40) pounds Working environment may involve climbing ladders and scaffoldings with equipment, upwards to forty (40) feet Capable of working in cramped workspaces such as ducts, crawl spaces, above ceilings, etc., • Must adhere to all OSHA and JCI safety policies and procedures, • Complete timesheets, mileage reporting and monthly vehicle reports in a timely manner What we look for Required • 5+ years’ experience with installation and service of fire alarm, access control, CCTV, intrusion and intercom systems. Knowledge of IP based systems required., • Demonstrate working knowledge of electricity and electronics In addition, demonstrate an aptitude for troubleshooting systems and performing necessary repairs, • Security experience with Access Control Systems as well as CCTV Systems required., • Ability to effectively work independently, • Demonstrate a high level of customer service, • Be able to carry and move equipment/tools weighing up to 40 pounds, • Minimum high school/trade school graduate, military, or two year Associate degree in a technical field involving electronics and/or computer based systems., • Working knowledge of personal computers (Windows 7 and later) and Microsoft's suite of Office software, • Working knowledge of IT network systems. Working understanding of IP based protocols., • Ability to use hand and power tools and test equipment such as multi-meters, oscilloscopes, digital analyzers, battery analyzers, frequency meters, decibel meters and communication devices as required, • Excellent verbal and written communication skills, • Ability to read and understand complex building architectural, mechanical and electrical documents, as well as project plans, specifications, schedules and equipment installation/operation/troubleshooting manual., • CCURE 9000 certification preferred but other certifications acceptable.

Smurfit Westrock (NYSE:SW) is a global leader in sustainable paper and packaging solutions. We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. Package Sustainably. Guided by our values of integrity, respect, accountability and excellence, we use leading science and technology to move fiber-based packaging forward. Title: Electrical Mechanical Technician Location: North Tonawanda, NY Training on 1st shift, then move to 2nd shift (3pm to 11pm) or 3rd Shift (11pm to 7am) As an Electrical Technician, you will be responsible for supporting the operation of a fast-paced packaging manufacturing facility. The ideal candidate must be able to conduct, maintain, test and repair electrical/electronic, mechanical, hydraulic, and pneumatic systems and components. Must be able to apply knowledge of electrical/mechanical principles in determining equipment malfunctions and restore in all areas of Manufacturing. Primary duties include the install, start up and shut down of equipment in accordance with company safety procedures for machine activation and shutdown in line with OSHA requirements; inform appropriate management and line mechanics of potential electrical/mechanical problems and inherent dangers involved and maintain company-required performance and maintenance records for identified equipment. The job also includes performing preventative maintenance functions as directed, assisting maintenance personnel with technical troubleshooting, and performing other duties as required. The ideal candidate will have a strong commitment to working safely and demonstrate the ability to work in a fast-paced environment, possess a strong desire to learn the maintenance of complex machinery, and have a desire to advance within the company. Qualifications: • High school diploma or equivalent required, • Electrical License required., • Previous electrical maintenance experience in industrial or manufacturing setting, • Military training and/or technical school preferred, • Computer experience/operation and PLC Programming, • Flexibility to work any shift and overtime as required, • Ability to maintain various manufacturing equipment, follow specific directions, and perform other duties as assigned., • Ability to work safely, maintain a clean and safe work environment, and comply with all safety regulations., • A thorough knowledge of electrical components and equipment including the use of special instruments for diagnostic purposes What we offer: • Corporate culture based on integrity, respect, accountability and excellence, • Comprehensive training with numerous learning and development opportunities, • An attractive salary reflecting skills, competencies and potential; the rate for this position is $27.63-$38.95 an hour with an attractive benefits package plus shift differential for 2nd and 3rd shifts, • A career with a global packaging company where Sustainability, Safety and Inclusion are business drivers and foundational elements of daily work. #NY #militaryjobs The starting rate for this position is $28.53/hr-37.67/hr depending on your role, level and location. The benefits for this role may include short-term bonus incentives, health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number or programs that provide for both paid and unpaid time away from work. Your actual pay will be based on your work location and other factors, such as your skills, experience and education. To learn more about the specific salary range for your preferred location, please contact your recruiter during the hiring process. Candidates are required to undergo a drug screening after receiving a conditional job offer, but before starting employment.

Job Description General Duties & Responsibilities: • Perform all aspects of landscape maintenance work including but not limited to: bed maintenance, shrub and hedge trimming, spring/summer/fall/winter clean-ups, weed whacking, etc., • Lawn mowing, weed whacking, edging, • Performs all aspects of snow removal, including snow blowing, snow plowing, salting & shoveling, • Safely transport of crew members, trucks, trailers, equipment and material., • Safely operate company equipment., • Read, understand and communicate daily work assignments while effectively prepping for the workday., • Wears appropriate clothing and safety equipment in accordance with OSHA and COVID-19 guidelines., • Complete necessary paperwork and end of day close-out requirements., • 2+ year’s experience required in all aspects of lawn maintenance., • Ability to do efficient physical work in all climates for 8-12 hours per day and lift up to 50lbs., • Must have and maintain a valid NYS Driver’s license with clean record., • Dependability is essential!, • Paid Weekly, • Career Driven, • Adaptable/flexible Benefits: • Dental insurance, • Health insurance Schedule: • 8 hour shift Requirements: -\t2+ years’ experience required in all aspects of lawn maintenance. -\tAbility to do efficient physical work in all climates for 8-12 hours per day and lift up to 50lbs. -\tMust have and maintain a valid NYS Driver’s license with clean record. -\tDependability is essential! -\tHigh School Diploma or Equivalent (Preferred) Compensation: Determination of salary is based on experience Additional Compensation: Performance based bonus This job is ideal for Someone Who is: -\tCareer Driven -\tAdaptable/flexible -\tLooking to help the business expands and grow with the business Job Types: Full-time, Part-time Schedule: -\t8-hour shift -\tWeekend availability Education: -\tHigh school or equivalent (Preferred) Experience: -\tLawn care and maintenance; landscaping and maintenance: 2 years (Preferred) License/Certification: -\tNYS Driver's License is a plusGeneral Summary: 12-month employment\r\nGeneral Duties & Responsibilities:\r\n•\tPerform all aspects of landscape maintenance work including but not limited to bed maintenance, shrub and hedge trimming, spring/summer/fall/winter clean-ups, weed whacking, etc.\r\n•\tSafely transport of crew members, trucks, trailers, equipment, and material.\r\n•\tSafely operate company equipment.\r\n•\tRead, understand, and communicate daily work assignments while effectively prepping for the workday.\r\n•\tWears appropriate clothing and safety equipment in accordance with OSHA and COVID-19 guidelines.\r\n•\tComplete necessary paperwork and end of day close-out requirements.\r\n•\tEffectively communicate with customers, co-workers, and supervisors.\r\n\r\nRequirements:\r\n•\t2+ years’ experience required in all aspects of lawn maintenance.\r\n•\tAbility to do efficient physical work in all climates for 8-12 hours per day and lift up to 50lbs.\r\n•\tMust have and maintain a valid NYS Driver’s license with clean record.\r\n•\tDependability is essential!\r\n•\tHigh School Diploma or Equivalent (Preferred)\r\n\r\nCompensation: Determination of salary is based on experience\r\nAdditional Compensation: Performance based bonus\r\n\r\n\r\nThis job is ideal for Someone Who is:\r\n•\tCareer Driven\r\n•\tAdaptable/flexible\r\n•\tLooking to help the business expands and grow with the business\r\n\r\nJob Types: Full-time, Part-time\r\n\r\nSchedule:\r\n•\t8-hour shift\r\n•\tWeekend availability\r\nEducation:\r\n•\tHigh school or equivalent (Preferred)\r\nExperience:\r\n•\tLawn care and maintenance; landscaping and maintenance: 2 years (Preferred)\r\nLicense/Certification:\r\n•\tNYS Driver's License is a plus

Job Description General Motors has a need for qualified Mechanical Journeypersons (Toolmaker). You will work under minimal supervision with a high level of independent judgement and problem solving. You should be flexible enough to take on and tackle multiple job assignments in a shift. Preferred Experience Includes: \n • Experience with planned maintenance systems and predictive technologies\n, • Experience with industrial robotics, automation, and conveyance systems\n\n Primary Responsibilities: \n • Follow established safety procedures according to OSHA standards and company procedures\n, • Maintain, dismantle, repair, and replace mechanical and hydraulic components (e. g. bearings, seals, details, carriers, etc.) on industrial machinery such as shafting, motors, generators, air compressors, engines, pumps, cylinders, gears, couplings, linkages, ball screws, high speed CNC spindles, coolant systems and filters, and combustion equipment and valves\n, • Layout, assemble, fabricate, maintain, and repair piping systems\n, • Use various hand or power tools for measuring, cutting, threading, grooving, bending, soldering, assembling, joining, and installing pipes, valves, and fittings\n, • Read and interpret blueprints for the mechanical operation and assembly of conveyor systems, material handling systems, robots, and other automation\n, • Operate mobile equipment (e.g. forklifts, vertical lifts, cranes)\n, • Determine loading requirements to rig equipment and material for lifting\n, • Set up and operate conventional or computer numerically controlled (CNC) machine tools such as lathes, milling machines, and grinders to cut, bore, grind, or otherwise shape parts to prescribed dimensions and finishes\n, • Fabricate punches, tools, steel rule tools and t-sets to exact specifications\n, • Plan sequences of operations for fabricating tools or assemblies using blueprints, sketches, or models\n\n Determine quality of finished products, ensuring defect-free parts, by verifying dimensions, alignment, and clearances for conformance to specifications using measuring instruments such as calipers, gauge blocks, micrometers, and dial indicators Interested individuals must meet the following minimum qualifications: \n • At least six (6) years of related experience in a Mechanical trade (millwright, pipefitter, toolmaker, machine repair) or a U.S. Department of Labor Certificate of Completion in a Mechanical trade (millwright, pipefitter, toolmaker, machine repair).\n, • Must be able to satisfactorily complete the General Motors hiring process requirements which includes comprehensive assessments, drug testing, and a background check\n\n, • At least 18 years of age\n, • Eligible to work in the United States\n, • Must be willing to work flexible shift hours and day, afternoon, or night shifts as well as overtime hours daily, weekend and holidays on those shifts with little notice\n, • GM DOES NOT PROVIDE IMMIGRATION-RELATED SPONSORSHIP FOR THIS ROLE. DO NOT APPLY FOR THIS ROLE IF YOU NEED OR WILL NEED GM IMMIGRATION SPONSORSHIP TO WORK OR TO REMAIN EMPLOYED AT GM (e.g., H-1B, TN, STEM OPT, etc.).\n, • If you are a current GM employee operating under a collective bargaining agreement, please contact your local HR/LR for employee placement opportunities.\n, • This position may be filled with a Journeyperson or Journeyperson In Training, the compensation ranges for a JIT include ($36.68-$42.80) or Journeyperson rate of $43.67. Certificates/credentials and scoring in interview will determine your status and pay.\n\n Physical Requirements \n • Quick response to safety instructions, alarms, and signals are a must\n, • Ability to work and stand for extended periods\n, • Comfortably wear personal protective equipment\n, • Navigate a busy environment\n, • Bend, twist, kneel, crouch, and reach\n, • May need to lift or carry materials weighing up to 50 lbs. depending on department\n, • Occasional sitting during certain tasks\n, • Drive mobile equipment when needed\n\n General Motors UAW hourly employment offers a very competitive compensation and benefit package. An annual incentive payout is also available, as qualified. Relocation and travel expenses will be the responsibility of the applicant. Please note - per the labor agreement between GM and the UAW, GM may share information and documentation relating to the credentials of applicants for this position (e.g., resumes, journeyperson cards, interview notes, certificates, etc.) with UAW personnel who have a need to know as part of their role on the UAW skilled trades team. About GM Our vision is a world with Zero Crashes, Zero Emissions and Zero Congestion and we embrace the responsibility to lead the change that will make our world better, safer and more equitable for all. Why Join Us We believe we all must make a choice every day - individually and collectively - to drive meaningful change through our words, our deeds and our culture. Every day, we want every employee to feel they belong to one General Motors team. Benefits Overview From day one, we're looking out for your well-being-at work and at home-so you can focus on realizing your ambitions. Learn how GM supports a rewarding career that rewards you personally by visiting Total Rewards Resources. Non-Discrimination and Equal Employment Opportunities (U.S.) General Motors is committed to being a workplace that is not only free of unlawful discrimination, but one that genuinely fosters inclusion and belonging. We strongly believe that providing an inclusive workplace creates an environment in which our employees can thrive and develop better products for our customers. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, national origin, citizenship status, religion, age, disability, pregnancy or maternity status, sexual orientation, gender identity, status as a veteran or protected veteran, or any other similarly protected status in accordance with federal, state and local laws. We encourage interested candidates to review the key responsibilities and qualifications for each role and apply for any positions that match their skills and capabilities. Applicants in the recruitment process may be required, where applicable, to successfully complete a role-related assessment(s) and/or a pre-employment screening prior to beginning employment. To learn more, visit How we Hire. Accommodations General Motors offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, emailus or call us at 800-865-7580. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.

ESSENTIAL DUTIES AND RESPONSIBILITIES • Achieve all safety, service, and cost targets in the warehouse. Lead with a safety mindset that ensures that every US Foods associate remains injury free, always. Champion safety procedures, processes and training to create and maintain a safety-first culture in the warehouse., • Oversee and develop Warehouse Managers through one-on-one coaching, training on policy and procedures, assisting in problem resolution when required, and leading by example., • Oversee and develop all warehouse associates by discussing performance with Warehouse Managers and creating plans to address gaps. Drive associate engagement and retention, and create a culture that embodies US Foods values., • Create a cohesive organization by keeping lines of communication open and directing workforce to ensure efficient workflow., • Build high-performing teams by reviewing staffing requirements and monitoring the interviewing and hiring of warehouse personnel. Review performance, coach to achieve productivity and safety targets, and deliver disciplinary action., • Develop production flow processes and identify process improvement and cost reduction strategies. Establish and maintain operational procedures for activities such as verifying incoming shipments, handling and disposition of product, warehouse inventory accuracy, and selecting and loading shipments., • Identify and stop waste, and improve processes to complete work more safely and efficiently., • Approve operation plan for daily loads in conjunction with Warehouse Managers, and ensure that trucks are completed within timelines. Ensure that load plans meet weight restrictions and that special customer requests are consistently accommodated., • Monitor operational data, including inventory losses, production goals and safety reports. Identify problems, determine causes and recommend changes to the VP of Operations to produce zero-error benchmark on accuracy and customer satisfaction., • Monitor and ensure integrity of our products and ensure that food safety standards are met., • Oversee the maintenance of the physical condition of the warehouse and its equipment in compliance with OSHA requirements., • In union facilities, assist HR and the VP Operations in interpreting the provisions of the collective bargaining agreement, administering appropriate discipline, settling routine grievances and participating in arbitrations as required., • Other duties assigned by manager. SUPERVISION: • Direct: Warehouse Managers, union and/or non-union warehouse clerical staff (Operations Clerks, Warehouse Clerks, Will Call Clerks, Slotting Clerks, Truck Builders, etc.), • Indirect: Union and/or non-union warehouse on-floor associates (Loaders, Selectors, Receivers, Forklift drivers, etc.) RELATIONSHIPS • Internal: Warehouse leaders and coworkers; Transportation leaders; Internal customers across departments (e.g., Sales), • External: Vendors WORK ENVIRONMENT • The work takes place in normal warehouse environments as well as in cooler and freezer areas where temperatures may be as low as -5 degrees. MINIMUM QUALIFICATIONS Related Experience/Requirements: • Minimum of five years of experience in warehouse supervision required. Knowledge/Skills/Abilities: • Broad knowledge of warehouse operations, methods and procedures., • Strong leadership, communication and people development skills., • Ability to openly and effectively communicate with all associates/departments within the company., • Familiarity with inventory control, OSHA, HACCP and other regulatory requirements., • Ability to interpret financial and operational data., • Proficient in Microsoft Office Suite (Excel, Outlook, Teams, etc.)., • Experience with warehouse management systems (WMS) and inventory control systems a plus. Travel: -10% travel required, typically for mandatory meetings and/or training. Education/Training: • High school diploma or GED required; college degree preferred. PREFERRED QUALIFICATIONS Licenses/Certifications: • HACCP certification a plus., • PCQI certification a plus. PHYSICAL QUALIFICATIONS • Must be able to perform the following physical activities for described length of time: OCCASIONALLY: 1% - 33 / FREQUENTLY: 34% - 66% / CONTINUOUSLY: 67% - 100% or NEVER JOB REQUIRES WORKER TO: FREQUENCY: STAND: FREQUENTLY WALK: FREQUENTLY DRIVE VEHICLE 1: OCCASIONALLY SIT: OCCASIONALLY LIFT 1-10 lbs (Sedentary): OCCASIONALLY 11-20 lbs (Light): OCCASIONALLY 21-50 lbs (Medium): OCCASIONALLY 51-100 lbs (Heavy): OCCASIONALLY Over 100 lbs (Very Heavy): NEVER CARRY 1-10 lbs (Sedentary): OCCASIONALLY 11-20 lbs (Light): OCCASIONALLY 21-50 lbs (Medium): OCCASIONALLY 51-100 lbs (Heavy): OCCASIONALLY Over 100 lbs (Very Heavy): NEVER PUSH/PULL 2: OCCASIONALLY CLIMB/BALANCE 3: OCCASIONALLY STOOP/SQUAT: OCCASIONALLY KNEEL: OCCASIONALLY BEND: OCCASIONALLY REACH ABOVE SHOULDER: OCCASIONALLY TWIST: OCCASIONALLY GRASP OBJECTS 4: OCCASIONALLY MANIPULATE OBJECTS 5: OCCASIONALLY MANUAL DEXTERITY 6: OCCASIONALLY 1 (Drive Vehicle: Forklift, pallet jack) 2 (Push/Pull: Pallet jack controls, doors, product, pallets) 3 (Climb/Balance: On/off pallet jack, stairs) 4 (Grasp Objects: Pens, telephone, computer mouse, paperwork, pallet jack controls, boxes) 5 (Manipulate Objects: Boxes, dolly, metal truck ramp, hand truck, paperwork, truck gate, straps) 6 (Manual Dexterity: Typing, use of office machines such as copiers, printers)

Job Description Why Join Grace at Home? Grace at Home is a provider-led, community-based health and care partner dedicated to improving the health and well-being of those who need care the most, with a deep commitment to high-needs, urban and rural communities. Our local physicians, nurses, and caregivers work together to serve people and the communities they live in, beyond just treating symptoms. We remove barriers by delivering personalized care as close to home as possible, often in-home, because we know a deep understanding of our patient’s race, culture, and environment is critical to delivering improved health outcomes. By empowering patients, providers, and caregivers with the support they need, we strive to make health and care a reality—not a burden—every single day. Join us in creating a better way to care. Position Overview Reporting to the Regional Head of Clinical Field Operations, the Clinical Manager is responsible for recruitment, training and management of Registered Nurses (RNs), Nurse Practitioners (NPs), and Physician Assistants (PAs), ensuring effective collaboration, optimal staffing, and high-quality patient care delivery to Grace at Home family members transitioning to home health care. This role involves strategic planning, team leadership, performance monitoring, in partnership with the Community Care Manager, overseeing an interdisciplinary team to meet organizational goals, improve member outcomes, and provide exceptional patient care. The manager will also develop processes and policies to ensure members, and their families, receive timely and effective navigation support, both telephonically and in the field. This position is accountable for ensuring Grace at Home is positioned to innovatively deliver on its promise. They should embody Care at Home’s core values, including, Trusted, Empathetic, Committed, Humble, Creative and Community-Minded. The Clinical Manager will have a strong knowledge base in providing care in the home, Value Based Care, HEDIS and Stars, documentation and coding, and medical practice principles. They will stay informed about advancements in healthcare practices and disseminate relevant knowledge. Key Responsibilities The Clinical Manager will have the following responsibilities: • Manage clinical team members; providing mentorship and guidance, regular performance evaluations, constructive feedback, and supporting professional development., • Execute strategies and solutions to create clinical and business value for the member populations and the provider practices within their region., • Ensure staffing levels and schedules optimize productivity, meeting patient care needs, maintaining high standards of care and safety in compliance with regulatory requirements., • Oversee daily operations to ensure compliance with organizational policies and procedures., • Monitor and evaluate patient care delivery to maintain high standards of quality and safety., • Implement evidence-based practices and clinical protocols., • Address and resolve patient or staff concerns promptly and professionally., • Coordinate orientation and continuing education for clinical staff, promoting opportunities for professional growth., • Serve as a liaison between clinical staff and administrative leadership., • Participate in interdisciplinary team meetings to enhance patient care coordination., • Ensure all staff adhere to regulatory standards, including HIPAA and OSHA requirements., • Maintain accurate documentation of clinical activities, training, and compliance records. The Clinical Manager should have the following qualifications: • Education/Experience: Master’s Degree in Nursing or related science field required, • Certification/Licensure: Active and unrestricted NP or PA license required, • Clinical: Must have 5+ years of strong leadership and management experience in a clinical setting; community-based care experience preferred. Experience with Medicare/Medicaid is a must., • Experience with implementing and maintaining regulatory requirements for clinical staff including NPs, PAs and RNs., • Excellent verbal, written, presentation, and group facilitation skills; ability to clearly articulate and present concepts and models in an accessible manner to Grace at Home’s team, investors, partners, and other stakeholders., • Must have strong critical analytic, thinking and communication skills necessary to evaluate and respond to team progress, anticipate needs and other related team dynamics., • Clinical: Must have 5+ years of clinical leadership experience; community experience preferred., • Computer Knowledge: Excellent computer skills required particularly Microsoft applications including Word, Excel, PowerPoint, and Outlook. Willingness to explore and learn new or unfamiliar applications that may benefit the clinical team Financial Well-being • Competitive Compensation: We offer competitive salaries to attract and retain the best talent., • Comprehensive Medical Plan: We proudly offer a comprehensive medical option with an employer contribution., • Dental & Vision Coverage: Maintain your oral and eye health with our employer-paid dental and vision plans via MetLife., • Employer-Paid Insurance: Life, Short-Term Disability (STD), and Long-Term Disability (LTD) insurance are provided at no cost to you., • Continuing Medical Education (CME) Allowance for Providers: Stay at the forefront of your field with our CME allowance., • Commuter Benefits: Save on your commute with our commuter benefits program. In-office work (minimum three days per week) is performed indoors in a traditional office setting with conditioned air, artificial light, and an open workspace. In this position you will need an to communicate with customers, vendors, management, and other co-workers in person and over devices, sometimes with people who are agitated. Regular use of the telephone and e-mail for communication is essential. Sitting for extended periods is common. Must be able to receive ordinary information and to prepare or inspect documents. Lifting of up to 10 lbs. occasionally may be required. Good manual dexterity for the use of common office equipment such as computer terminals, calculator, copiers, and FAX machines. Good reasoning ability is important. Able to understand and utilize management reports, memos, and other documents to conduct business.

Job Description Sono Bello is America's top cosmetic surgery specialist, with 185+ board-certified surgeons who have performed over 300,000 laser liposuction and body contouring procedures. A career at Sono Bello means being part of a dynamic and high-energy work environment where every team member can make a difference. We love what we do, and it shows! We believe everyone deserves to have their best body today and pursue their best life now. The LPN/LVN supports patient care before, during, and after procedures, assists surgical teams, and ensures safety, compliance, and premium patient experience. This role is central to clinic operations, patient education, and quality improvement efforts. Qualifications: • Graduate of an accredited program; current state licensure required. Active Compact Nursing License accepted in lieu of state-specific licensure., • Maintains active license and meets renewal requirements., • ACLS certification required., • Proficient in Microsoft Office and electronic health records. Patient Care & Clinical Support • Assist with pre-op and post-op visits and surgical procedures., • Educate patients on pre/post-operative care, recovery bundles, and clinic protocols., • Monitor patient responses and escalate concerns to RN or Physician., • Maintain clinical documentation and patient confidentiality (HIPAA compliance)., • Prepare OR setup, patient positioning, and surgical tools., • Maintain accurate intraoperative documentation (e.g., Time Out, surgical notes)., • Support laser safety, drug labeling, and equipment handling., • Track and manage medical supplies and equipment., • Use Sono Bello tools (Manuals Portal, QM, etc.) for compliance and documentation., • Attend staff meetings, trainings, and complete all required certifications., • Maintain professionalism, patient rapport, and sound clinical judgment., • Understand and enforce OSHA, AAAHC, and company quality standards., • Participate in clinic performance goals and KPIs., • Effective communication, documentation, and organizational skills., • Competency in infection control, wound assessment, and emergency response., • Ability to lift up to 25 lbs., work on feet, and manage high-paced clinical environments., • Demonstrated reasoning, math, and problem-solving aptitude. Note: This job description outlines the primary duties and responsibilities of the role but is not intended to be all-inclusive. Additional tasks may be assigned, and existing responsibilities may be modified or removed as necessary to meet operational needs, within the scope of the individual's role, licensure, and applicable regulatory standards. #LI-LD1 Pay may vary by location, and actual compensation depends on factors like qualifications, experience, skills, and business needs. Sono Bello may adjust this range in the future. Full-time employees may also receive benefits such as incentives, equity, health coverage, 401(k) matching, paid time off, and parental leave. Benefits Package includes Medical, Dental, Vision, Life Insurance, 401K, EAP, PTO, and Paid Holidays. For applicants located in CA: link

Job Description Job Title: Scientist, Production Reports To: Principal Scientist or Supervisor Position Location: Buffalo, NY FLSA Status (Exempt/Non-Exempt): Non-Exempt Position Summary: Individuals serving in this position will be working in both manufacturing, product development, and QC testing at the ZeptoMetrix business unit. Employees will be trained in a variety of lab techniques specific to the department assigned as well as document generation and completion. Key Responsibilities: • Execution of quality system procedures, • Proper execution of SOPs and work instructions for manufacturing procedures assigned by supervisor, • Ability to work individually as well as part of a team towards completion of specific projects, • Use of manufacturing related equipment as required by work instructions and SOPs, • Data analysis, • Demonstration of sound problem-solving skills and troubleshooting abilities, • Adherence to quality systems with special regard to FDA, ISO 13485 and GMP / OSHA compliance, • QC testing of components and finished products, • Inventory management of materials and supplies, • Focus on continual process improvement, • Cleaning and maintenance of equipment, • Guided experimental design and product testing assigned by supervisor, • Preparation of reagents, media, and buffers, • Performs other duties as assigned Candidates will participate in one of our following Departments. Department Specific Potential Duties: Immunology • Test kit assembly including dispensing and product labeling Virology • Use of aseptic technique in a Biosafety Cabinet to perform cell culture, viral infections, harvests, processing, and QC testing for the manufacture of products from raw materials and cell culture components., • Proper use of PPE and safety protocols in BSL-2 and BSL-3 containment laboratories. Bacteriology • Growth and manipulation of multiple microorganisms including bacteria, fungi, parasites, and bacteriophages for product manufacturing., • Proper use of PPE and safety protocols in BSL-2 and BSL-3 containment laboratories Molecular • Use and understanding of molecular biology methods and applications., • Manufacture of molecular controls/panels using aseptic technique., • Operation of real-time PCR equipment and sample to result platforms. Education: • 4-year B.S. degree required in biology, microbiology, or other life sciences program Experience: • Relevant experience in laboratory skills/cGMP preferred. Including but not limited to pipetting, preparing reagents, centrifugation, recording observations, etc., • Understanding of molecular biology techniques Minimum Requirements/Qualifications: • Ability to analyze and interpret data and results, • Proficiency in Microsoft Office, • Strong analytical, problem solving, process improvement skills, • Attention to detail, • Ability to multitask and adapt to changing priorities, • Thrives in a fast-paced, collaborative environment, efficiently works under pressure, within deadlines or other time essential constraints, • Excellent communication skills, both written and verbal, to communicate to all levels of the organization clearly and concisely, • Strong work ethic and an ability to excel within a rapidly changing and growing organization, • Willingness to cross train and support other teams as needed for our medium sized business., • This position does not have any direct reports but serves as a coach and mentor to peers across the organization. Salary Range: $50,000 - $60,0000, depending on location and experience. This position has not been approved for Relocation Assistance. The above statements are intended to describe the general nature and level of the work being performed by people assigned to this job. They are not an exhaustive list of all of the duties and responsibilities associated with it. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, protected veteran status, or disability status.

Job Description CentiMark Corporation is the nation’s largest commercial/industrial roofing contractor with over 100 offices and 3,500 employees. We have an exceptional opportunity for a full-time Onsite Quality Control Representative to support our crews in the Greater Buffalo, NY area. This role is paying $25/hr - $30/hr + Overtime + Premier Benefits! The Quality Control Representative monitors and evaluates the workmanship on multiple projects. They will spot check projects during installs and ensure that the crews are following the installation specification set forth by the management and perform all final quality control checks of every project once they are completed. Job Summary: • Confirms that crews are at the appropriate job sites daily, • Perform all planned and random inspections of jobs in production daily, • Be responsible for documenting all onsite visits, • Enforce all company and manufacturer installation specifications, • Monitor and address violations of OSHA safety guidelines, • Assure to the best of their ability that all materials, workmanship, and construction are in full compliance with the contract plans and building codes, • Pick up additional needed material and deliver it to the jobsite, • Conduct final QC inspection within 24 hours after completion of job, • Report major installation errors to the Production Manager to dispatch crews to make adjustments, • Participate in all subcontractor and production department meetings, • Take in progress photos when needed and upload to CRM, • 5+ years commercial roofing experience required, • 3+ years of Foreman experience, • Construction safety knowledge preferred, • Capability of interpreting blueprints is a plus, • Able to lift 50 lbs. & climb up & down ladders to minimum heights of 25 feet, • Team player that can work in a fast-paced, deadline driven, collaborative environment, • 2 Health Insurance Plans:, • Free “Core Plan” – Free Medical & Dental, • “Buy Up Plan” – Features a lower deductible for Medical, • Vision Plan, • Free Life Insurance and AD&D Insurance, • Traditional 401K with Company Match, • Roth IRA with Company Match, • Paid Holidays and Vacation, • Employee Stock Ownership Program (ESOP), • Company Vehicle, Fuel Card, • Flexible Spending Account (FSA), • Weekly Pay, • Referral Bonuses, • Dayshift Hours Zc54Cy7deF

Job DescriptionDescription:Press Assistant Sunday through Thursday (11:00 p.m.-7:00 a.m., Shift Differential $1.50 per hour) Brook + Whittle, one of North America’s leading sustainable labeling solutions providers, is currently seeking a Press Assistant This Press Assistant position will be responsible in assisting the Press Operator. Previous Machine Experience required. Press Assistant Primary Duties and Responsibilities • Assist the pressman directly in all aspects of make readies and running a job., • Stage raw material rolls for the operator with core tag accessible for operator, • Load raw material, make splices and verify that all splices are of good quality., • Assists operator in changeovers as needed, • Assists operator during web breaks as needed, • Labels finished rolls with correct neons & core tags as needed, • Monitors roll changes and keeps abreast with roll numbers on log, • Reports machine & equipment breakdown to supervisor & maintenance personnel, • Understands and supports all policies, procedures, instructions, rules, and regulations (including safety) associated with the Finishing Department., • Always puts the goal to someday to be able to operate a press on his own., • Consults with department manager and Quality Assurance of any quality related defects, • Assist in investigating root cause analysis & corrective actions for departmental needs, • Performs other duties as assigned, • Relocates skids keeping product separation in mind and maintaining the pressroom in a neat and orderly manner., • Responsible for complete all document information accurately., • Must be able to work overtime as needed, • Must cover for operators while on vacation or breaks, • Consults with Press Hall supervisor on all assigned duties., • All duties assigned to maximize efficiency of press hall equipment, • HS Diploma or GED required., • S.M.E.D. Training desired., • Manufacturing environment – exposure to some hazardous conditions but not limited to dust, dirt, high noise levels, chemicals, etc. Safety regulations in place following OSHA guidelines., • Must be able to lift / push / pull up to 50 lbs unassisted., • Must be able to stand for the majority of shift. · 10 paid holidays · Vacation at an accrued rate · MDLive – Telemedicine* · Life insurance* · Long term disability insurance* · Employee assistance program (EAP)* Company Offered Benefits: · Dental* · Vision* · 401(k) – first of the month after 90 days of employment – auto-enroll at 3% · Short term disability* · Voluntary life insurance* · Flexible spending account – health care and/or dependent care* · Critical illness insurance, hospital indemnity insurance and accident insurance* Company Subsidized Benefits: · Medical* • Benefit will be available on the 1st of the month after 60 days of employment ** Benefit will be available after 90 days of employment About Us Brook & Whittle Ltd. is one of North America’s leading Sustainable Labeling Solutions providers, producing pressure sensitive, flexographic and shrink sleeve labels for many of the nation’s leading brands. The company serves multiple consumer markets, including Personal Care, Beverage, Food, Nutraceuticals, Wine & Spirits, and Household Chemicals. The company’s rapid growth can be attributed to its world-class staff of employees and its commitment to sustainability, print innovation, and the latest technological advancements. Wouldn’t it be cool to go into a store, pick up a product and say “we make that label”! Our culture is first and foremost one of collaboration and teamwork. We hold ourselves to high professional, ethical, and fairness standards. We have zero tolerance for anything less. We celebrate our diverse workforce and reward good performance through our recognition program, advancement opportunities, and our compensation structure. We welcome you to consider being a part of this great team. We’re passionate about leaving the planet better than we found it. But we can’t do it alone. We need trailblazers, independent and outside-the-box thinkers. People who are eager to learn, eager to succeed and have a passion for working as a team to solve technical and creative challenges. At Brook + Whittle, we have the opportunity to do impactful work each and every day. AAP/EEO Statement Brook & Whittle LTD provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Brook & Whittle complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Brook & Whittle expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of Brook & Whittle LTD’s employees to perform their job duties may result in discipline up to and including discharge. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Work Authorization/Security Clearance Must be eligible to work in the United States without restriction. Requirements:

Job Description Job purpose The Director of Facilities & Construction will be a strategic leader responsible for the planning, operation, and maintenance of all facilities and infrastructure assets. This role oversees the design, building, renovation, and upkeep of all properties, ensuring safety, compliance, and operational efficiency. The position requires deep knowledge of facilities engineering, construction management, sustainability practices, and vendor relations to support both day-to-day operations and long-term capital improvement strategies. Duties and responsibilities • Oversee all building systems, including HVAC, electrical, plumbing, structural, and fire/life safety systems., • Ensure preventative and predictive maintenance schedules are followed to maximize asset lifespan., • Manage custodial, landscaping, snow removal, and other essential services., • Lead planning, design, budgeting, permitting, and execution of construction, renovation, and tenant improvement projects., • Partner with architects, engineers, contractors, and internal stakeholders to ensure on-time, on-budget delivery., • Oversee bid processes, negotiate contracts, and manage change orders., • Maintain full compliance with OSHA, ADA, NFPA, environmental, and local building codes., • Oversee workplace safety programs, emergency preparedness, and incident reporting., • Ensure all vendor and contractor work adheres to company safety standards., • Develop and manage annual facilities and capital budgets., • Track expenses, analyze cost drivers, and recommend efficiency improvements., • Negotiate vendor agreements for maintenance, construction, and specialized services., • Implement energy management and sustainability initiatives to reduce environmental footprint and operating costs., • Create multi-year facilities master plans aligned with business growth and operational needs., • Maintain accurate records, drawings, and maintenance logs for all assets. Qualifications • Bachelor’s degree in Facilities Management, Engineering, Construction Management, or related field., • Certified Facility Manager (CFM), LEED AP, PMP, or similar credentials strongly preferred., • HVAC, Electrical, or Plumbing certification a plus., • 8+ years in facilities management, construction, or engineering leadership roles., • Proven track record delivering multi-million-dollar construction or renovation projects., • Experience managing distributed facilities in manufacturing, logistics, or commercial sectors., • Strong understanding of mechanical, electrical, and structural systems., • Proficiency with CMMS (Computerized Maintenance Management Systems)., • Familiarity with sustainability standards, building automation systems, and energy efficiency strategies., • Exceptional organizational, budgeting, and vendor management skills., • Strong communication and stakeholder management abilities., • Demonstrated ability to lead cross-functional teams and manage competing priorities. Safety Requirements • Must be able to work in both an office and warehouse environment, • Ability to travel within the Buffalo area as needed, • Follow all GMPs (Good Manufacturing Practices) Physical requirements • Must be able to lift up to 50lbs, • Must have transportation to move between sites in the greater Buffalo area Direct reports Facilities Supervisor Assistant Property Coordinator M-F

Job Description About Carvana If you like disrupting the norm and are looking to join a company revolutionizing an industry then you will LOVE what Carvana has done for the car buying experience. Buying a car the old fashioned way sucks and we are working hard to make it NOT suck. I mean, have you seen our vending machine?! We are looking for people who are excited to thrive in an environment of impactful change. Team spirit is evident at Carvana and everyday we let our passions and creativity foster innovation. We take big swings, set ambitious goals, and challenge each other to make data- and process-driven decisions in everything we do. Here are a few of our stories! We've been changing the game since 2013, and we're not taking our foot off the gas now. Want more of the story? Check out our background here. About the team and position We're looking for an experienced and collaborative Field Safe & Secure Manager to lead the Safe and Secure efforts for a large distribution center, consisting of 400+ associates and a product inventory exceeding $100MM. The Field Safe & Secure Manager will work closely with the Facility Leadership Team (Operations, Wholesale, Logistics, and People Operations) in supporting the safety of our associates and the protection of our assets in a dynamic working environment. The Field Safe & Secure Manager will be responsible for implementing enterprise programs and ensuring the effective adaptation by the appropriate team within one or more designated facilities. They will provide day to day leadership of the Safe and Secure Team. The ideal candidate must possess leadership and people management skills, strong communication skills, quantitative rigor, and must be able to exercise independent judgment and work collaboratively with Carvana's varied operational functions. Most importantly, you will see your insights have an immediate, tangible impact every day in a disruptive and rapidly growing company. The position is field based and reports directly to a Regional Associate Director or Senior Manager, Field Safe & Secure. What you'll be doing • Day to day leadership of the Safe and Secure Team at their facility(s). This will include recruiting, hiring, and on-boarding new associates to ensure their acclimation success. Provide clear expectations, support through consistent coaching, and provide follow up and problem solving to situations that may arise. Ensure an effective schedule is in place to properly meet facility goals. The Safe and Secure Team will consist of Safe and Secure Associates and Safe and Secure Technicians., • Build and maintain strong working relationships with the Facility Leadership Team to provide appropriate business support on all issues pertaining to Associate Safety, Site Safety, Site Physical Security, Inventory Control, Crisis Management, and Business Continuity. Integrate with daily operational processes to ensure Enterprise Safe and Secure Program elements are appropriately in place. Work proactively to identify any new risks and work with partners to implement solutions. Partner with the Field Safe & Secure Manager on continuing business needs and solutions to address., • Work daily with the Inventory Control Analyst and the Inventory Control Associate Team to monitor all vehicles assigned and in transit to the facility(s). Ensure any vehicle exception is researched and tracked. Attend weekly calls/meetings to ensure a strong working knowledge of the processes and communication of key issues. Manage the stolen vehicle reporting process and lead all inquiries pertaining to such. Partner appropriately with Market Safe and Secure Manager, Corporate Insurance, and other partners during the reporting and inquiry process., • Work daily with the Safe and Secure Team and appropriate third party vendors to ensure consistent controls are in place at our gates and other key access points. Manage the Safe and Secure technology infrastructure to ensure all tools are properly functioning and are being utilized in the most efficient way to promote a safe and secure environment for our associates., • Manage the Card Access process at our facility(s). Work closely with the Safe and Secure Technician, who will be the day to day leader of this process, to ensure timely issuance of badges to Carvana Associates and appropriate building access., • Complete Daily Production walks in conjunction with business partners. Document all issues and provide immediate solutions to remedy. Be a coach to the associate team to support the training and their roles. Work with the Facility Leadership Team to build and implement facility improvement plans to reoccurring or large scale risks. Lead the implementation of all new hire Safe and Secure training., • In partnership with the Enterprise Safe & Secure Team and the respective Carvana Business Unit – support the implementation of EHS protocols in the various facilities. Support should include training, protocol coaching, site assessments and improvement plans, recognition, and other actions to drive a culture of safety in each location., • Be an active participant in identifying and resolving issues that impact the Safe and Secure Program. This includes active participation in resolving the issue rather than simply reporting., • Track, and report on key performance indicators and exception based reporting to help mitigate risk and identify trends and root causes, including working with Risk and Operations groups to determine how to collect, store, and organize data relevant to Field Safe and Secure., • In partnership with the Market Safe & Secure Manager, provide project management support for key initiatives within the market. When directed by the Market Manager, address Safe and Secure issues and provide solutions to Carvana facilities in close proximity., • Ensure inquiries of internal and external theft and fraud are properly conducted, in close partnership with HR and applicable operating departments., • Be an active member in the local community representing Carvana specifically with local police, fire, prosecuting offices, and emergency management agencies., • Foster open and productive working relationships with other applicable company departments., • Exercise prudent discretion regarding confidential and sensitive personnel information., • Perform other duties as assigned., • Annual Theft Loss versus Accrual rate., • Annual Vehicle Damage Loss versus Goal., • Safe and Secure Facility Budget Actual vs. Plan., • Engagement Survey Results (Safe and Secure Team Engagement & Turnover)., • Third Party Security Actual versus Plan., • WC and GL Claims vs. Plan., • Ready Now Promotable Candidates. What you should know/have • Bachelor's degree from an accredited college or university preferred., • At least 5 years of Safe and Secure leadership experience, preferably including distribution, warehousing, and fulfillment., • At least 3 years' experience directly supervising and managing a team., • Excellent verbal and written communication skills., • Strong analytical and data-driven skill set., • Experience implementing Risk Mitigation programs to improve company profitability in collaboration with partners within a complex business environment., • Experience working closely and communicating effectively with a diverse set of stakeholders in an ever-changing, rapid growth environment with tight deadlines; Ability to take initiative in a constantly-changing work environment while maintaining flexibility and a collaborative attitude., • Experience investigating and resolving theft and fraud issues., • Able to help create, develop and implement process improvement(s)., • Exceptional organizational skills with attention to detail and ability to prioritize multiple tasks., • Crisis Management Leadership experience., • Experience leading OSHA Program implementation within a distribution, warehousing, and fulfillment environment., • Must promote the company culture and mission to all employees, vendors, clients, and business partners., • Knowledge of how to utilize Microsoft systems., • Full-Time Salary Position with a competitive salary., • Medical, Dental, and Vision benefits., • 401K with company match., • A multitude of perks including student loan payments, discounts on vehicles, benefits for your pets, and much more.., • A great wellness program to keep you healthy and happy both physically and mentally., • Access to opportunities to expand your skill set and share your knowledge with others across the organization., • A company culture of promotions from within, with a start-up atmosphere allowing for varied and rapid career development., • A seat in one of the fastest-growing companies in the country. Other requirements To be able to do your job at Carvana, there are some basic requirements we want to share with you. Legal stuff Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Please note this job description is not designed to contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description Join a team that nourishes life from farm to table! Upstate Niagara Cooperative, proudly owned by 200+ local family farms, is one of America’s largest and most stable dairy cooperatives. Guided by farmer- and employee-led values, we process and market high-quality milk, yogurt, dips, sour cream, cottage cheese, and more under our trusted brands: Upstate Farms®, Bison®, Milk for Life®, and Intense Milk®. Here, you’ll support sustainable farming, strong communities, and the mission to deliver fresh, local dairy to families every day. The Environmental, Health and Safety (EHS) Manager leads the development, implementation, and continuous improvement of the EHS programs at our fluid dairy manufacturing facility. This role is responsible for ensuring full regulatory compliance with occupational health, safety, and environmental laws while cultivating a strong, proactive safety culture and driving sustainability initiatives. The EHS Manager partners with plant leadership, operations, maintenance, and quality teams to ensure safe, clean, and compliant operations. Key Responsibilities: Health & Safety: • Oversee site compliance with OSHA standards, industry best practices and meet organizational goals for overseeing the Safety Management Operating System (SMOS), • Conduct incident investigations and lead root cause analysis and corrective action implementation, • Provide site-specific safety training and development across all teams, • Involvement in daily huddle meetings to provide a safety department presence and message, • Develop individual- and plant-focused SMART goals from high-level initiatives, • Daily walkthroughs to ensure boots on the ground with a focus on behavior and adherence to safe work practices, • Engaging with personnel to promote worker participation in proactive safety, • Review and prioritize Open Action Items and update status, • Review and follow up of near misses and hazard recognition in the facility, • Review weekly Supervisor Audits and ensure that follow-up actions are added to the Action List in Teams and addressed, • Oversee and facilitate the implementation of safety programs and procedures, • New Employee Safety Orientations, • Implement the health and safety program requirements at the facility, • Assisting with the development of Lockout/Tagout procedures, • Perform proactive safety functions, • Audit completion of the required safety documentation like pre-shift inspections on PITs, • Develop Job Hazard Analysis (JHA) for plant operations, • Develop One Point Lessons as necessary, • Oversee Monthly Safety Committee Meeting, • Ensure that OSHA 300 log is current and properly maintained, • Identify and Implement Weekly Toolbox Topics, • Perform and document Monthly Safety Manager Compliance Tasks, • Ensure facility compliance with all applicable environmental laws and regulations (EPA, Clean Water Act, Clean Air Act, RCRA, etc.)., • Manage environmental permits including air, wastewater, stormwater, and waste management., • Conduct routine site inspections, environmental audits, and risk assessments., • Develop, implement, and monitor environmental programs including spill prevention, waste reduction, and recycling initiatives., • Prepare and submit regulatory reports (e.g., Tier II, TRI, DMRs, annual emissions inventory)., • Liaise with local and federal environmental agencies as needed., • Serve as the site’s environmental subject matter expert during inspections and audits., • Maintain accurate records of all environmental documentation, permits, and compliance activities., • Collaborate with operations, maintenance, and engineering teams to incorporate environmentally sound practices in day-to-day operations., • Lead environmental incident investigations and root cause analysis., • Develop and deliver environmental compliance training to plant personnel. Work within a union environment among a cross-disciplinary population. Must be able to work individually and in a team setting. Organize and manage time and competing priorities. Flexibility to train and meet with staff overnight or afternoon shifts. On-call 24/7/365 with duties shared among coworkers. The team includes technical and administrative managers, engineers, trade professionals, administrators, financial professionals, and laboratory scientists. The above requirements represent the knowledge, skill, and ability required. Reasonable accommodations are available to enable individuals with disabilities to perform essential functions. Education and experience: • A BS degree in Safety Engineering, Industrial Hygiene, Sciences, Business, Health or in a related field. MS in EHS or an MBA degree is preferred., • Five plus years’ experience in manufacturing or industrial setting preferred, • Deep understanding of legal health and safety guidelines, • Understanding of environmental regulations and good practices, • Ability to produce reports and develop/manage relevant policies, • Good knowledge of data analysis and risk assessment, • Excellent organizational and motivational skills, • Outstanding attention to detail and observation ability, • Exceptional communication and interpersonal abilities, • Familiar with standard concepts, practices, and procedures within the health, safety, and environmental field., • Collaborative problem solver who understands the complexities of a manufacturing environment, • Certified Hazardous Materials Manager (CHMM), • Certified Environmental Manager (CEM) The EH&S Manager may be exposed to and entrusted with confidential information relative to production methods, customers, and company strategy. Management Responsibility: The EH&S Manager is a support function role that operates under the general direction of the Senior Director of EHS & PSM Compliance. Work Environment The EH&S Manager will support all facets of EHS at the facility including the plant and office environment. Must be capable of operating standard office equipment and seeing, grasping hold, walking, climbing, bending, stretching, and lifting up to 40 lbs. At times immersed in the plant production environment working near moving mechanical parts, corrosive chemicals, high-speed conveyors, and processing equipment where temperatures fluctuate, floors may be wet, and noise is a constant factor. Pay: $75k-$90k/yr.* *The salary range indicated in this posting represents the minimum and maximum of the salary range for this position. Actual salary will vary depending on factors including, but not limited to, budget available, prior experience, knowledge, skill and education as they relate to the position’s qualifications, in addition to internal equity. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays. Upstate Niagara Cooperative, Inc. is committed to equal employment opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Job Description Facility: Buffalo, NY General Description The Manufacturing Engineer is to support the Operations and Design Engineering teams by efficiently managing the implementation of new products, processes, and equipment into production. The Manufacturing Engineer is also responsible for documenting new and existing processes in the production environment. Specific Duties • Document existing processes in production., • Suggest improvements for existing processes, research options, and make recommendations., • Train production operators as required., • Create project plans as required., • Work with Maintenance personnel as required., • Create tool designs in Solidworks, including solid model generation and drawings., • Work with purchasing to get tooling quoted., • Support machine shops as required during tool build., • Create and/or update Work Instructions and other ISO documents., • Create layouts for workstations and work with operations team to optimize existing workstations and implement new ones., • Participate in problem solving and root cause analysis for issues on the floor and customer complaints. Work to implement corrective actions to prevent future occurrences., • Participate in MRB meetings and provide input on material dispositions and rework methods., • Identify areas of concern related to scrap and make recommendations to reduce. Work with operations and quality on solutions to prevent scrap., • Conduct time study analysis with operators to determine proper efficiency for production process., • Validated/Verify new and updated process, • Participate in GEMBA Walk for Plant and APU for awareness of issues related to manufacturing processes., • Attend design reviews as formal handoff from Design Engineering to Manufacturing Engineering., • Follow all applicable environmental, health and safety rules and procedures and immediately report all dangerous situations, near-misses, and injuries. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Qualifications • 4-year engineering degree or comparable experience., • Must have the ability to work independently and possess strong workload management and organizational skills., • Must be able to effectively and professionally communicate with management, supervisors, staff, and customers., • Excellent written and verbal communication skills., • Strong ability in Solidworks., • Knowledgeable about dimensioning and tolerancing., • Aware of lean manufacturing concepts such as single piece flow., • Knowledgeable on general machining and fabrications techniques such as grinding, milling, turning, and welding., • Proficient in Microsoft Windows and Microsoft Office applications (Excel, Word, PowerPoint, Access)., • Must learn and adapt quickly in a fast pace manufacturing environment., • Ability to self-check work for accuracy. Physical Demands • The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully., • The employee frequently is required to stand; walk, talk and hear. The employee is occasionally required to climb or balance and stoop. A large degree of lifting (moderate to heavyweight), bending, squatting and maneuvering. Specific vision abilities required by this job include close vision, for viewing a computer terminal distance vision, peripheral vision, depth perception vision for moving objects and ability to adjust focus., • This position is not substantially exposed to adverse environmental conditions., • The ability to work with chemicals in the proper environment and while wearing PPE. Personal Protective EquipmentThe following list of PPE is required while in the manufacturing area: • Safety Glasses conforming to ANSI Z87.1 or higher, • Steel Toe Safety Shoes conforming to OSHA General Industry Standards 29 CFR 1910, • Hearing protection conforming to OSHA General Industry Standards 29 CFR 1910, • The ability to wear a dust mask conforming to OSHA General Industry Standards 39 CFR 1910.134, • Additional PPE may be required depending on the department Hutchinson Industries, Inc. is an equal opportunity employer. This is an exempt position. Hutchinson Industries, Inc. reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between Hutchinson Industries, Inc. nor the employee, and either one may terminate employment without notice at any time.

Job DescriptionSalary: $31.00 to $34.00 per hour Montante Construction is seeking a Commercial Carpenter to join our growing team for our Buffalo, NY office. If you think your skills and experience align with this position, we would love to hear from you! About Montante Construction: Montante Construction is a full-service construction management company led by some of the preeminent construction professionals in the region. Our team helps clients define and manage the scope, schedule, budget, and ultimate completion of new construction projects, building expansions, and the rehabilitation of aging structures into contemporary uses. We utilize our technical knowledge, experience, and resourcefulness to improve efficiency and enhance client value, while providing unprecedented communication and transparency with our clients and project partners. Montante Construction is an affiliate of Montante Group. About the Opportunity: In this position, the Carpenter, a member of our Self Perform team, will work in conjunction with the project manager and project superintendent to deliver construction projects safely, on schedule and within budget. The Carpenter will be responsible for executing efficient production activities and duties as assigned by the project team. A successful candidate is willing and adaptable to meet the needs of the projects we build and will have a variety of duties, including but not limited to: Responsibilities: • Work independently to install cold-formed or wood framing, and/or install millwork, ceilings, doors, frames, or hardware., • Ensure that project safety measures are always maintained., • Clearly communicate any concerns to the project team specific to project safety, quality and/or schedule., • Assist the property management and/or solar teams on an as needed basis with tasks that may include minor carpentry support, clean-up, and painting., • Other duties as assigned by project management Qualifications & Experience: • 5 - 10 years of experience working in commercial construction, required, • OSHA 10 or 30 safety training preferred, OSHA 10 certification will be assigned upon hire., • Ability to lift 50lbs regularly., • Comprehensive knowledge and practice of OSHA safety standards., • General knowledge of carpentry work including basic cold formed or wood framing, and the installation of millwork, doors, frames, ceilings, & hardware., • Ability to work as an adaptable team player with independent accountability on assigned tasks, • Positive, timely, and clear communication skills Total Compensation: Montante Construction offers a competitive total compensation package including: • Competitive base wages, reviewed annually with bonus potential, • A comprehensive benefit package including medical insurance with employer contribution towards premium, medical opt out credit, employer paid life and long-term disability insurance!, • 401k Retirement Plan with up to 4% employer match on contributions, • Voluntary Dental and Vision insurance, • Up to 15 days of paid time off (PTO) in year one, increasing with years of service, and paid holidays, • Financial insurance protection options which include short- and long-term disability, accidental death & dismemberment insurance, critical illness and accident insurance, legal and identity theft options, and pet insurance, • Training & Professional Development opportunities, • Community and Employee engagement events and initiatives

Job DescriptionJob Title: Director of Quality and RegulationLocation: Buffalo, NYHire Type: Direct HirePay Range: $180k plus bonusWork Model: Onsite, Monday–Friday, Flexible 8:00 AM – 5:00 PM Recruiter Contact: Samantha Marranca | 716-256-1271 | & Scope:Positional OverviewWe are seeking an experienced Director of Quality & Regulatory to join the executive leadership team. This role will be responsible for developing and implementing the strategy, systems, and standards for the quality and regulatory function, ensuring compliance with all applicable legal and industry requirements. The successful candidate will collaborate with leadership peers across Manufacturing, Supply Chain, R&D, HR, and other key functions to drive quality excellence and ensure adherence to cGMP, FDA, EPA, OSHA, and other regulatory standards.Role & Responsibility:Tasks That Will Lead To Your Success • Provide leadership for the site’s quality and regulatory function as part of the executive leadership team., • Develop and oversee systems, policies, and standards to ensure compliance with cGMP, FDA, EPA, OSHA, and related requirements., • Establish and maintain SOPs, internal audit programs, and training initiatives., • Manage the Quality Laboratory and support Environmental Health & Safety compliance., • Ensure adherence to customer quality requirements and implement corrective actions for any deviations., • Oversee quality control and assurance systems, investigating failures and driving timely resolutions., • Lead inspections of incoming goods (raw materials, components, finished goods) in compliance with agreed standards., • Direct monthly site audits, reporting results to leadership and ensuring corrective actions are taken., • Audit and manage suppliers to confirm compliance with established standards., • Partner with Manufacturing and R&D to ensure product quality across all production batches., • Serve as point of contact for 3rd party, government, and independent audits., • Review and approve packaging labeling for compliance with regulations and substantiation requirements., • Represent the company with professional organizations and industry groups., • Lead, mentor, and develop staff across the quality and regulatory function, including direct and indirect reports. Skills & ExperienceQualifications That Will Help You Thrive, • BS/BA degree required., • 10–15 years of experience in quality and regulatory functions within a manufacturing environment., • In-depth knowledge of FDA cGMP regulations and ISO standards., • Proven experience managing compliance with regulatory agencies., • Expertise in OTC monographs, labeling, and claim substantiation., • Strong communication skills with the ability to influence cross-functional teams., • Demonstrated leadership in managing, training, and developing staff.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Dental insurance, • Flexible schedule, • Health insurance, • Paid time off Duties/Responsibilities: 1. Create and execute preventive maintenance schedules for equipment, systems, and infrastructure., 2. Diagnose failures in mechanical, electrical, pneumatic, and hydraulic equipment and carry out repairs promptly., 3. Collaborate closely with production and engineering teams to troubleshoot equipment problems and reduce downtime., 4. Keep detailed records, logs, and documentation of maintenance, repairs, and inspections., 5. Ensure compliance with safety standards, OSHA regulations, quality standards, and company policies during all maintenance activities., 6. Assist with installing and commissioning new equipment and machinery., 7. Source replacement parts and oversee critical spare inventory., 8. Suggest and carry out enhancements to equipment design and maintenance practices., 9. Support root cause analysis and ongoing improvement initiatives related to equipment performance., 10. Coordinate with external vendors and contractors when specialized maintenance or repairs are needed., 11. Train and mentor junior maintenance technicians as necessary. Required Skills and Abilities 1. Strong troubleshooting and analytical skills in mechanical, electrical, and control systems., 2. Familiarity with manufacturing equipment such as presses, pumps, conveyors, mixers, injection molding, or CNC machinery., 3. Ability to read and interpret mechanical drawings, schematics, and technical manuals., 4. Skilled with hand tools, diagnostic devices, and machine shop machinery., 5. Strong communication and collaboration skills., 6. Ability to prioritize tasks and effectively manage time in a fast-paced environment., 7. Experience with rubber molding preferred. Education and Experience 1. Bachelors degree in Mechanical, Electrical, or Industrial Engineering or a related technical field preferred., 2. 3 to 5 years of maintenance experience in a manufacturing environment., 3. Experience with PLCs, automation systems, and CMMS (Computerized Maintenance Management Systems) preferred. Physical Requirements 1. Ability to occasionally lift and carry up to 50 pounds., 2. Visual acuity needed for reading instructions, evaluating equipment and work areas, and spotting hazards., 3. Willingness to walk, stand, and move within a manufacturing environment for prolonged periods., 4. Ability to work in environments with different temperatures, noise levels, and exposure to equipment and machinery.

Job DescriptionDescriptionPosition Overview DWC Mechanical is seeking a dedicated and knowledgeable Safety Manager to oversee and manage all aspects of safety across our commercial HVAC construction projects. The ideal candidate will ensure that all employees, subcontractors, and job sites adhere to the highest safety standards while complying with OSHA and industry regulations. This role plays a key part in maintaining our reputation for quality work and a safe working environment. ResponsibilitiesSafety Reporting and Data Management • Conduct and maintain accurate records of regular site safety inspections and audits to identify hazards and ensure compliance with federal, state, and local safety regulations (e.g., OSHA 1926)., • Lead investigations of safety incidents, accidents, and near-misses, including documentation and follow-up on corrective actions., • Ensure the proper use and maintenance of personal protective equipment (PPE), fall protection systems, confined space protocols, and lockout/tagout procedures relevant to HVAC systems., • Collaborate closely with project managers, superintendents, and foremen to plan safe work practices and anticipate job-specific risks (e.g., rooftop work, crane lifts, mechanical equipment installation)., • Maintain and submit all required safety reports and documentation, including incident logs, inspection reports, and training records., • Serve as the point of contact for OSHA inspections or other regulatory audits., • Lead investigations into workplace injuries, filing paperwork/claims with workers compensation., • Coordinate emergency response procedures and serve as a point of contact during safety-related emergencies or incidents., • Work with Human Resources to ensure injured employees are compensated appropriately.Safety Training and Management:, • Develop, implement, and maintain safety programs tailored to commercial HVAC construction environments., • Provide onboarding safety orientation for new hires and coordinate ongoing safety training, toolbox talks, and job-specific hazard training for field personnel., • Assign and oversee progress of employees on the Interplay training platform., • Host in-person training sessions on approved topics., • Keep up to date with current safety laws, best practices, and HVAC-related safety innovations to proactively improve DWC Mechanical's safety program., • Maintain updated curriculum and training records.Fleet Management Administrator, • Meet with President of DWC and department heads to assess vehicle needs., • Oversee the acquisition/disposition of vehicles., • Manage fleet-related contracts, insurance policies, and vendor relationships., • Ensure all maintenance, repairs and recalls are completed on time., • Analyze fleet expenses and usage (fuel, maintenance, miles, etc.) and work to maximize efficiency., • Maintain accurate records of all company vehicles, including registrations, insurance, service history and mileage logs., • Ensure compliance with transport regulations, licensing requirements, and health & safety standards., • Support the implementation of fleet management systems, telematics, and tracking tools., • Review individual driver reports and act when necessary., • Respond to driver inquiries, accidents, and breakdowns, ensuring timely resolution.Insurance Meetings, • Represent the company at all required insurance meetings., • Travel via plane or vehicle to destination insurance meetings., • Represent DWC Mechanical. Qualifications • Bachelor's degree in Occupational Safety, Construction Management, Environmental Health, or a related field (preferred)., • Minimum 5 years of safety management experience in commercial HVAC or mechanical construction., • Strong knowledge of OSHA standards and safety best practices specific to HVAC installation (e.g., working at heights, electrical safety, confined spaces)., • Safety certifications such as OSHA 30, CHST, CSP, or equivalent is highly preferred. Benefits • Competitive pay, • Comprehensive health insurance (including dental and vision), • Health Saving Account with company contribution, • Paid Life Insurance, • 401(k) plan with company matching, • Generous paid time off, • Paid Holidays, • Professional development assistance, • Employee discount

Job DescriptionSalary: $85,000.00 to $110,000.00 annually Montante Solar is seeking an experienced Project Manager to join our Buffalo, NY team and manage projects throughout New York State. The successful candidate will take a project from contract execution through closeout and will be responsible for client relations, procurement, maintaining schedule and budget, supporting construction, and ensuring the project is built to Montante Solar's standards. If your skills and experience align with this position, we would love to hear from you! About Montante Solar: Montante Solar is a full-service installer of commercial and industrial solar energy systems. The Montante Solar team is experienced in commercial solar construction and real estate development, which enables us to offer a wide range of solar energy services including development, construction, system maintenance, and project finance. Montante Solar serves clients throughout New York and is the regions second largest solar installer. About the Role: The primary responsibility of this position is to manage large scale solar projects through the project life cycle. This includes leading customer relations, project design, material procurement, array construction, subcontractor management, quality assurance and performing project closeout duties. This individual will have a variety of duties, including but not limited to: Responsibilities: • Ensuring that project safety measures are always maintained., • Working with project management and engineering partners to understand project requirements, including schedule and budget., • Collaborating with team members to create construction drawing set., • Supporting the utility interconnection and incentive processes., • Managing the submittal and RFI processes., • Creating subcontract scopes and ensuring all tasks are assigned., • Leading project procurement for materials, equipment, and subcontracts., • Maintaining & completing all project paperwork, permits, and licenses as necessary, • Leading weekly project meetings., • Regularly reviewing estimated budgets versus actual costs to ensure a projects profitability., • Providing project updates on safety, quality, schedule, and budget to senior leadership., • Effectively closing-out projects and compiling operations & maintenance manuals Qualifications, Skills and Abilities Required: • 5 years or more experience in construction project management - solar or electrical project management experience preferred, • Secondary education (Associate or Bachelors degree) in construction management, renewable energy, or a related field., • Experience implementing OSHA regulations and other relevant safety standards in work and on job sites., • Proficient in Microsoft Office Suite and construction project management software - Procore experience a plus., • Professional and thorough verbal and written communication with the ability to interact effectively, negotiate, and motivate at all levels of the organization both interpersonally and in group settings., • Proven ability to manage multiple tasks and prioritize effectively in a fast-paced environment., • Ability to travel to all work site locations on a regular basis. Compensation Package: Montante Solar offers a competitive total compensation package including: • Competitive base wages, with annual review and bonus opportunity, • A comprehensive benefit package including medical insurance with employer contribution towards premium, employer paid life insurance, and employer paid long term disability!, • 401k Retirement plan with 4% employer match and immediate vesting, • Generous paid time off, up to 15 days in year one with increases based on length of employment, and paid holidays, • Employer paid life insurance and long-term disability insurance, • Financial insurance protection options which include short- and long-term disability, accidental death & dismemberment insurance, critical illness and accident insurance,legal and identity theft options, and pet insurance., • Community and Employee engagement events and initiatives

Job Description Title: Facilities Engineer Reports to: Director of Procurement Direct Reports: Facilities Team Position Summary: The Facilities Engineer is responsible for the design, maintenance, and continuous improvement of building systems, infrastructure, and equipment across all company facilities. This role ensures compliance with safety, environmental, and operational standards while optimizing energy use, reliability, and cost-effectiveness. The Facilities Engineer collaborates with cross-functional teams to manage capital projects, troubleshoot facility-related issues, and support strategic planning for site development and expansion. This position shall drive the vendor management life-cycle, which includes competitive bids, awards, purchasing, total cost of ownership analysis & fostering relationships for long-term stability. Essential Responsibilities: • Lead facilities staff, which includes management of daily activities and work prioritization, • Ensure facilities are compliant with health, safety, environmental, and regulatory standards., • Monitor and maintain building systems (HVAC, electrical, plumbing, lighting, security, etc.) across Modern’s campuses., • Manage preventative maintenance programs and troubleshoot system failures., • Plan & manage seasonal activities including but not limited to snow plow removal & lawn care services., • Plan, design, and implement facility infrastructure improvements, renovations, and expansions., • Oversee contractors, vendors, and consultants to ensure high-quality project execution., • Support sustainability initiatives by identifying energy efficiency opportunities., • Develop and maintain facility documentation, including blueprints, O&M manuals, and equipment logs., • Analyze system performance and prepare technical reports and recommendations., • Participate in emergency preparedness planning and response efforts., • Provide engineering support for space planning, relocations, and workplace safety enhancements., • Assists in the preparation of cost estimates for projects by conducting RFI/RFP & ROI activities., • Perform additional duties as assigned by management. Education and Experience • Bachelor’s degree in Mechanical, Electrical, Civil Engineering, or related field., • 3- 7 years of experience in facilities engineering or building systems management, • Professional Engineer (PE) license preferred by not required, • Strong technical understanding of HVAC, mechanical, electrical, plumbing, and building automation systems., • Working knowledge of building codes, OSHA standards, and environmental regulations, • Proficiency in AutoCAD, CMMS software, and Microsoft Office Suite, • Excellent problem-solving, project management, and analytical skills, • Strong interpersonal and communication abilities for cross-functional collaboration, • Work is performed in both office and field environments., • May be required to lift up to 50 lbs. and perform physical inspections in tight spaces or rooftops., • On-call support or extended hours may be required for emergencies or critical projects. Benefits at Modern: • Medical, Dental and Vision Coverage, • Retirement Savings with Employer Match, • Health Savings Accounts, • Voluntary Insurance Products, • Employee Assistance Program, • Paid Time Off, • Paid Holidays, • Direct Deposit/Electronic Paystubs, • Discount Memberships, • Company-Sponsored Events Modern Corporation is an Equal Opportunity Employer and is committed to providing all applicants and employees the right to equal employment opportunities with regards to all aspects of the employment relationship. The Company will not engage in discriminatory practices against any applicant for employment or employee of the Company because of race, color, religion, marital status, familial status, military or veteran status, disability (including pregnancy-related conditions), creed, sex, sexual orientation, gender, gender identity or expression, transgender status, age, national origin, ancestry, domestic violence victim status, genetic predisposition or carrier status, genetic information, known relationship or association with any member of a protected class, or any other legally protected class or status.

Job Description We are currently seeking an experienced Driller to support our environmental and geotechnical drilling programs in Western New York. This full-time position requires experience with soil sampling, installation of various size groundwater monitoring and recovery wells, rock coring, air & mud rotary and geotechnical drilling. Additional responsibilities include routine maintenance and minor mechanical repairs of equipment. Duties • A minimum of 5 years of experience as lead driller on truck or track-mounted rotary drill rig, • Commercial Driver License (CDL) with clean driving record, • 40-hour HAZWOPER training required Requirements • OSHA 10-hour or 30-hour construction safety training are preferred but not required, • Ability to weld a plus, • Experience with operation of heavy equipment (e.g., excavator, bulldozer, etc.) a plus Salary Range: $30.00 - $40.00 The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. o Flexible Work Schedule o Health/Dental Insurance o 401k Plan with Employer Match o Short & Long Term Disability o Profit Sharing o Paid Time Off o Leadership Development Program o Fitness Reimbursement o Tuition Reimbursement o Referral Bonus Program o Wellness Program o Team Building Events o Community Service Events

Job Description Hohl Industrial Services is currently seeking a Project Safety Coordinator to join our team! One would be responsible for providing on-site support and oversight of the company's safety program. This role will work closely with site Leadership to ensure daily safety operations, audits, training and overall compliance is being maintained. Responsibilities: • Site Safety Support, • Conduct daily inspections to identify potential hazards and ensure compliance with safety regulations, including Corporate and specific Customer requirements., • Assist Foremen in the completion and auditing of Daily Job Safety Analysis (JSA)/Daily Work Plans., • Attend job planning meetings to help incorporate safety measures into daily work activities., • Support project leadership in ensuring proper use of equipment and personal protective equipment (PPE) to maintain a safe work environment., • Investigate incidents and near-misses, documenting findings and recommending corrective actions., • Collaborate with the Corporate Safety Director, Project Managers, and Supervisors to integrate safety measures into project planning and site execution., • Training & Orientation, • Develop and implement site safety policies and procedures in accordance with OSHA and other relevant standards., • Lead safety toolbox talks in an engaging and understandable manner; ensure full attendance and maintain accurate documentation., • Conduct on-site training as needed for job-specific topics such as forklift and aerial lift operation, fall protection, confined space entry, etc., • Coordinate owner-required orientation and training programs; verify attendance and documentation for site access compliance., • Stay updated on industry's best practices and regulatory changes to continuously improve safety protocols., • Site Audits & Compliance, • Perform regular safety inspections and field observations based on project scope and duration., • Evaluate and document compliance in the following areas:, • Safety Documentation: JSA/Daily Work Plans, SDS sheets, job site postings, HASP, emergency contacts., • Mobile Equipment: Operator qualifications, inspection records., • PPE Usage: Ensure all personnel are using the appropriate protective equipment., • Site Conditions: Assess walking/working surfaces, housekeeping, site access., • Rigging & Hoisting: Review lift plans, crane inspections, rigging qualifications, and operator/rigger/signalperson certifications., • Fall Protection: Ensure fall protection systems are in place and used properly., • Tools & Equipment: Inspect hand and power tools for safe condition and use., • Additional Items: Check for proper storage of compressed gas, scaffold safety, fire extinguisher availability, necessary permits (e.g., hot work, confined space), first aid kits, and use of caution/danger tape., • Confined Space Entry: Monitor and verify safety protocols are followed., • Maintain daily reports to the Corporate Safety Director., • Three to Five (3-5) years of construction related safety experience to include but not limited to rigging, confined space, welding and hot work, steel erection, and fall protection., • OSHA 30 required, but OSHA 510 preferred, • In-depth knowledge of OSHA regulations and construction safety standards, • CSM/CHST preferred, • Valid Drivers License required Hohl Industrial Services, Inc. established in 1950, with headquarters in Tonawanda, NY, is a full service specialized organization that provides for a diverse industrial clientele. Hohl offers a unique range of field, shop, technical, equipment sales and services. With our professional staff of engineers, project managers, skilled tradespeople, fabricators and machinists, we are able to thoroughly study and develop a customized plan to meet all of our client's needs. Combining this with our innovative strategies and techniques, added with our experienced field personnel, we administer these plans in a safe, expedient and economical measure. Job Posted by ApplicantPro

Job Description Daemen University is a dynamic, independent, liberal arts institution committed to excellence in student centered learning. The University places special emphasis on preparing students for excellence in professional life, civic engagement, and on instilling and understanding that learning is an exciting lifelong journey. Students are encouraged to be creative, innovative, ethically minded leaders for an ever-changing, diverse, and interconnected world. The Mission of Daemen University is to prepare students for life and leadership in an increasingly diverse and complex world through the integration of education and professional preparation. Daemen University is going beyond instrumental needs to foster the development of individuals who are dedicated to the health and well-being of local and global communities. Purpose of Role Under the supervision of the Asst AD for Sports Medicine & Performance provide athletic training services as part of the sports medicine team to the Daemen intercollegiate athletic teams and or club sports (as needed) under the direction of and collaboration with the designated Team Physician(s) and other qualified medical personnel. About This Opportunity Joining our Athletics team, the Assistant Athletic Trainer will be responsible for the following: Specific Tasks/Duties performed: • Provide athletic training services for the University's Division of Athletics, included but not limited to: prevention, recognition, clinical evaluation and diagnosis, immediate care, treatment, rehabilitation and reconditioning of athletic injuries., • Coordinate with the Asst AD for Sports Medicine & Performance to staff the Athletic Training Facilities and to provide athletic training services, including attendance at scheduled team practices and home and away competitions as necessary., • Requires frequent evening and weekend hours; may also necessitate early morning hours., • Team travel will be required in providing athletic training services at select away intercollegiate contests., • Assist in staffing and the day-to-day operations of the athletic training facilities., • Follow established emergency action plans for the University's athletic facilities as well as off-campus venues., • Follow and assist with enforcement of all policies/procedures as outlined within the Sports Medicine policy/procedure manual, including codes of conduct and rules of use for the athletic training facility and equipment., • Consult with Team Physician(s) for guidance on the treatment of injured student-athletes, and report on their progress., • Maintain accurate medical records on all injuries, treatment, and rehabilitation and physician referrals., • Assist with the responsibility of maintaining the athletic training room file system., • Serve as a liaison for student-athletes between physicians, strength and conditioning coaches, sport coaches, athletes, parents and other health care providers as needed., • Apply a team approach with the Asst AD for Sports Medicine & Performance, strength and conditioning coaches and sport coaches to ensure that student-athletes participate only when physically able and that any physician instructions are understood and followed., • Comply with any and all policies regarding health care delivery as indicated by the University's regulations; including the completion of University "excess insurance" claims promptly (as needed)., • Assist with the collection, maintenance and privacy of all (new and returning) student-athletes' current contact, emergency contact, health insurance, consent and health-status documents., • Assist with pre-participation exams, as needed, for prospective student-athletes., • Provide for the prevention of athletic injuries through the application of protective tapings, wraps, braces, and equipment, and assist in the design of practices to help reduce the incidence of injury., • Advise coaches and/or strength and conditioning staff of flexibility, strengthening and conditioning programs to help prevent injuries and optimize performance., • Provide immediate care of athletic injuries and refer student-athletes to emergency medical facilities when necessary., • Design and supervise rehabilitation programs for athletic injuries under the direction of the Team Physician(s) or other referring physician., • Assist in budgeting, ordering and inventory of sports medicine supplies., • Educate, counsel and advise athletes on health-related issues, including nutrition and substance abuse., • Assist with conducting institutional and or NCAA drug testing as needed., • Option to serve as a Clinical Preceptor for an Athletic Training Program and supervise athletic training students., • Complies with the organization and administration of an Exposure Control Plan for Bloodborne Pathogens in compliance with the New York State Department of Health (NYSDOH) and the Occupational Safety and Health Administration (OSHA)., • Maintains professional credentials by engaging in professional development and satisfying continuing educational requirements set forth by the Board of Certification (BOC) for Athletic Trainers and the New York State Education Department (NYSED)., • Operates the program under the rules and regulations of the University, the NCAA, and the ECC; understanding that an employee can be suspended for a period of time without pay or terminated if found to be involved in significant or repetitive violations of NCAA regulations;, • Perform other duties as requested by the Asst AD for Sports Medicine & Performance and/or Athletic Director. Required Qualifications Required Knowledge, Skills and Abilities: • Masters degree in Athletic Training, Exercise Science, Health or Human Performance or related field and one (1) year of direct clinical experience as a BOC Athletic Trainer., • -or- Bachelors degree in an appropriate area outlined above and three (3) years of direct clinical experience as a BOC Athletic Trainer., • -or- a candidate with the appropriate degree requirements and less than one (<1) year of direct clinical experience may be considered., • Strong time management, interpersonal, organizational, written and oral communication skills., • Be able to apply a 'team' approach to the delivery of student-athletic health care., • Must be able to work long periods under conditions requiring moderate physical demands., • Tolerate long periods of standing, frequent bending, stooping, walking and lifting., • Requires exposure of outdoor elements and the ability to tolerate extreme weather conditions., • Ability to work early mornings, evenings, weekends, holidays and travel with teams when necessary., • Valid driver's license required. License must meet insurance company rules and regulation for driving underwriting criteria. Required (Professional) Credentials: • Possess and maintain Athletic Training certification through the Board of Certification (BOC) and the New York State Department of Education (NYSED). Online verifications can be conducted at:, • Must comply with NYSED requirements within 90 days of hire., • Adhere to the current BOC Standards of Professional Practice for Athletic Trainers1., • Comply with the current Athletic Training Laws, Rules & Regulations of the New York State Department of Education2., • Current certification in CPR/AED. 1Board of Certification (BOC), Standards of Professional Practice for Athletic Trainers document: . Accessed September 6, 2023 2New York State Education Department, Office of the Professions, Laws, Rules & Regulations of Athletic Training: Accessed September 6, 2023 Position is full time, 10-month administrative, professional exempt and requires evening and weekend hours and travel. Total Compensation Daemen University offers a robust total compensation package that includes: • Health insurance with an option of two plans: an HSA plan with the deductible funded by employer HSA contributions, or a copay plan., • Dental insurance through the Guardian network., • Vision insurance through the Guardian network, and an option between the VSP or Davis plans., • An 8% employer contribution to the retirement savings account when employees contribute just 5%., • Fully paid long term disability insurance, guaranteed-issue life insurance for new hires up to a volume of $150,000., • Tuition waiver for full-time employees and their qualified dependents. Entrance in Tuition Exchange scholarship opportunities to pursue education at other institutions., • Generous time off for administrative and staff employees. Daemen University strongly encourages all campus community members to get vaccinated for COVID-19, including a booster vaccine. Job Posted by ApplicantPro

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer-focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay The Integration Specialist- Pro Sound is responsible for installation and service of Pro AV and Paging Systems, ensuring that audio-visual and paging systems are installed correctly and smoothly to meet client needs and our high standards. We are looking for a candidate who demonstrates technical knowledge, can troubleshoot technical issues and the drive to learn and grow with our team. Training and advancement opportunities available. What are we looking for • A minimum of two years of experience in audio visual, paging, IT, or related industry., • Proficient in the installation and setup of audio-visual systems, paging systems, and components, including displays, projectors, sound systems, constant voltage paging systems, and other audio-visual equipment., • Experience in troubleshooting and servicing analog and digital AV / PA systems a plus., • Experience working with and setting up IP networks a plus., • Experience working on construction sites, following safety protocols, and working with hand and power tools. (OSHA Certification a plus), • Excellent customer service, verbal, and written communication skills in dealing with clients and management., • Ability to think on your feet, problem-solve, and learn quickly., • Great time management skills, • A clean valid driver's license (daily travel to customer sites and occasional extended travel required), • Ability to lift at least 50 pounds. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. Job Posted by ApplicantPro

Job DescriptionSalary: $70,000 to $85,000 annually Montante Construction is seeking a driven, self-starting Assistant Project Manager to join our growing team! If your skills and experience align with this position, we would love to hear from you! About Us: Montante Construction is a full-service construction management company led by some of the preeminent construction professionals in the region. Our team helps clients define and manage the scope, schedule, budget, and ultimate completion of new construction projects, building expansions, and the rehabilitation of aging structures into contemporary uses. We utilize our technical knowledge, experience, and resourcefulness to improve efficiency and enhance client value, while providing unprecedented communication and transparency with our clients and project partners. About the Role: The Assistant Project Mangers role is to assist in the management of construction projects. Working closely with the Project Manager, this position is responsible for assisting in ensuring projects are done safely, on schedule, and within budget. Essential Responsibilities: • Ensure that project safety measures are maintained at all times., • Assist the Project Manager with assigned duties including the following:, • Reviewing and understanding project requirements & budgets., • Developing of the overall project schedule., • Purchasing various subcontractor and supplier packages that are in line with the project budget including rental equipment., • Maintaining regular site presence to assess progress and site or team needs., • Coordinating subcontractors., • Maintaining & completing all project paperwork, permits, and licenses as necessary., • Providing project updates on safety, budget, and schedule to the leadership team., • Effectively closing-out projects and compiling operations & maintenance manuals., • Attending, documenting, and presenting at weekly project meetings Qualifications, Skills and Abilities Required: • Secondary education (Associates or Bachelors) in construction management, or a related field., • 2 - 4 years of experience with a bachelors degree or 6 to 10 years of experience in construction project management with Associate's degree, • Experience implementing OSHA regulations and other relevant safety standards in work and on job sites. OSHA 10 or 30 Certification desired, • Proficient in Microsoft Office Suite and construction project management software, Procore experience a plus., • Professional and thorough verbal and written communication with the ability to interact effectively with all levels of the organization both interpersonally and in group settings., • Proven ability to manage multiple tasks and prioritize effectively in a fast-paced environment with firm deadlines., • Ability to travel to all work site locations on a regular and consistent basis. Compensation Package: Montante offers a competitive total compensation package including: • Competitive base wages, • A comprehensive benefit package including medical insurance with employer contribution towards premium, employer paid life insurance, and employer paid long term disability!, • Generous paid time off, up to 15 days in year one with increases based on years of employment, and paid holidays, • 401k Retirement plan with 4% employer match and immediate vesting, • Financial insurance protection options which include short- and long-term disability, accidental death & dismemberment insurance, critical illness and accident insurance,legal and identity theft options, and pet insurance. Annual performance and salary review, with potential for bonus • Community and Employee engagement events and initiatives Montante Companies, LLC is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Job Description Welcome to Good Carbon Co., where we're not just reimagining the future-we're actively building it, one sustainable project at a time. Rooted in our commitment to both our clients and the communities we serve, we're pioneering the transformation of real estate into eco-friendly havens. From acquiring properties to crafting them into super energy-efficient residences, our work is driven by relentless innovation and purposeful problem-solving. At Good Carbon Co., we're more than a company-we're a movement of forward-thinkers, visionaries, and solution architects. And now, we're looking for someone like you to help us keep our spaces clean, welcoming, and ready to inspire. Position Summary The Cleaning Specialist plays a key role in maintaining high standards of cleanliness, health, and visual appeal in both common areas and vacant units across our properties. This role ensures our spaces not only sparkle but reflect our values-creating homes that are safe, sustainable, and tenant-ready. You'll lead by example, embodying our team values of humble, hungry, and smart, while ensuring our buildings remain places people are proud to live and work. Key Responsibilities Apartment Common Area Cleaning • Perform daily and scheduled cleaning of hallways, stairwells, lobbies, laundry rooms, and elevators., • Disinfect high-touch surfaces such as doorknobs, handrails, and light switches., • Vacuum and mop floors to maintain a safe and polished environment., • Clean and empty trash receptacles and replace liners., • Fully clean and sanitize units in preparation for new tenants., • Wipe down walls, windows, countertops, cabinets, and appliances., • Sanitize bathrooms including sinks, toilets, tubs, and mirrors., • Sweep, vacuum, and mop all flooring., • Clean windows, mirrors, and glass surfaces to maintain visibility and aesthetic., • Remove visible smudges, dust, and debris., • Inspect and report damaged flooring or required repairs., • Follow all safety procedures when handling cleaning chemicals and equipment., • Monitor and maintain adequate stock of cleaning materials and tools., • Report any maintenance issues or safety hazards to the Maintenance Manager promptly., • Interact respectfully and professionally with tenants and staff., • Prior experience in residential, commercial, or hospitality cleaning preferred., • Working knowledge of cleaning chemicals and equipment., • Ability to work independently and follow detailed instructions., • Strong communication and organizational skills., • Accountability: Takes ownership of assigned duties and follows through., • Attention to Detail: Maintains high cleaning standards., • Team Player: Collaborates effectively with site staff and other team members., • Time Management: Completes tasks efficiently and prioritizes work. Good Carbon Co. is an equal opportunity employer and will not tolerate discrimination in employment on the basis of race, color, age, sex, sexual orientation, gender identity or expression, religion, disability, ethnicity, national origin, marital status, protected veteran status, genetic information, or any other legally protected classification or status. Good Carbon Co. is committed to maintaining a safe and compliant workplace. As part of our hiring process, all offers of employment are contingent upon the successful completion of a background check. This may include verification of employment history, education, criminal history, and other relevant background information, in compliance with applicable federal, state, and local laws, including the Fair Credit Reporting Act (FCRA) and New York State regulations. By applying to this position, you acknowledge that a background check may be conducted if you are selected for employment.

Job Description SCHEDULE: Monday-Thursday: 7:00 AM to 4:30 PM, Friday: 7:00 AM to 11:00 AM Objective: To play a vital role in maintaining cleanliness, safety and orderliness within and outside the facility. Minimum Requirements: • High School Diploma or equivalent, • Working knowledge of the use of hand and power tools, • Must be customer service oriented, • Must be able to crouch, kneel, crawl, and climb, • Must be able to lift, pull and push a minimum of 50 pounds, • Having working knowledge of the use of hand and power tools such as floor sweepers, snow blowers, lawn and garden tools, etc., • General cleaning and disinfecting, • Snow removal, salt application and grounds maintenance, • Compact cardboard, • Remove trash, • Scrub floors, • Stock bathrooms with supplies, clean bathrooms as required, • Organization and disposal of skids and scrap steel, • Fill out logs and paperwork as required, • Participate in 5S activities including daily area cleanup and facility cleanup efforts, • Adhere to all company policies, procedures, and workplace practices, • Perform any other duties or tasks as assigned or required, • Other duties as assigned This position demands physical strength, endurance. Candidates must be comfortable with repetitive tasks, heavy lifting (up to 40 lbs.), standing for a long period of time, bending, twisting, pushing, pulling and working in a fast-paced production setting

Job Description Description: About Us: At FastBridge Fiber, we are revolutionizing the internet experience by delivering high-speed fiber-optic connectivity to homes and businesses. We pride ourselves on exceptional service, cutting-edge technology, and a commitment to safety, quality, and integrity. Our team is passionate about providing reliable, high-performance internet while upholding the highest standards in customer service and professionalism. We are seeking a Lead Technician to take charge of fiber installation operations, ensuring that every installation meets our rigorous quality and safety standards while delivering an outstanding experience to our customers. If you have strong technical expertise, leadership skills, and a commitment to excellence, we want to hear from you! Job Summary: As the Lead Technician, you will oversee and execute fiber-optic installation projects, ensuring they are completed safely, efficiently, and with the highest quality. You will be responsible for guiding a team of technicians, troubleshooting complex issues, and maintaining compliance with all industry and company safety regulations. This role requires a combination of hands-on technical work, leadership, and customer interaction. Key Responsibilities Safety & Compliance Ensure all installations adhere to OSHA safety standards, company protocols, and industry best practices. Conduct regular safety briefings and enforce compliance with personal protective equipment (PPE) and hazard prevention measures. Identify and mitigate risks on-site, maintaining a proactive approach to workplace safety. Train and mentor technicians in safe work practices and emergency procedures. Quality Assurance & Technical Expertise Lead fiber-optic installations, including aerial, underground, and in-home setups, ensuring top-tier craftsmanship. Perform advanced troubleshooting and diagnostics for fiber-optic network issues, using appropriate tools and methodologies. Conduct quality checks and ensure all installations meet company specifications, minimizing service disruptions. Collaborate with engineering and network teams to resolve complex technical challenges and optimize service reliability. Maintain a working knowledge of emerging technologies and industry advancements. Customer Service & Professionalism Serve as the primary point of contact for customers during installations, ensuring a seamless and positive experience. Educate customers on their new fiber services, equipment usage, and troubleshooting basics. Address customer concerns with professionalism and provide effective solutions. Uphold company values of integrity, respect, and transparency in all customer interactions. Leadership & Team Development Supervise, train, and mentor a team of technicians, fostering a culture of continuous improvement. Provide performance feedback and support skill development initiatives. Coordinate daily assignments, ensuring efficient scheduling and task completion. Lead by example, demonstrating technical expertise, professionalism, and strong work ethic. Operational Efficiency & Reporting Ensure all job documentation is accurate and complete, including service records, inventory usage, and job reports. Communicate effectively with dispatch, management, and fellow technicians to streamline workflows. Assist in inventory management, ensuring necessary tools and materials are available for installations. Identify opportunities for process improvements to enhance efficiency and service delivery. Schedule: Tuesday-Saturday Off Sunday and Monday. Requirements: Qualifications & Experience Required: Experience in fiber-optic or telecommunications installation. Experience leading teams or mentoring junior technicians. Commitment to workplace safety and compliance with industry regulations. Strong customer service orientation and communication skills. Ability to lift up to 75 lbs, climb ladders, and work in various environmental conditions. Valid driver's license with a clean driving record. Ability to work the schedule of Tuesday-Saturday, 8:00am-5:00pm. Preferred: Certifications in fiber-optic installation. Experience with aerial and underground fiber placement. Familiarity with GIS mapping, RF signal testing, and network diagnostics. Previous experience in a leadership or training role. Excellent troubleshooting and problem-solving skills. Why Join Us? Competitive salary with performance incentives. Comprehensive health, dental, and vision benefits. Take home vehicle. 401(k) with company matching. Ongoing training and professional development opportunities. A supportive team environment with opportunities for career growth. The chance to be a part of a cutting-edge fiber-optic network revolution. Compensation details: 28-31 Hourly Wage PIa58a5b02b9b6-25405-38483064

Job DescriptionSalary: $27.00 to $31.00 per hour Montante Construction is looking for an experienced labor foreman to join its growing construction team! This individual will work in conjunction with the project manager and project superintendent to deliver construction projects safely, on schedule and within budget. The labor foreman will be responsible for executing efficient production activities in support of the project and project team. This role will, at times, perform work and at other times supervise laborers and labor subcontractors. The Labor Foreman will be responsible for the following: • Supervise and work independently at general labor activities including construction support for demolition operations, concrete work, and carpentry installation including:, • Assist project supervision with loading and unloading equipment., • Work with small tools such as hammers, pliers, screw drivers, and drill motors., • Provide general cleanup for all construction project activities., • Ensure safety is maintained at all times, • Support supervisors and project deadlines by thoroughly carrying out all assigned activities., • Clearly communicate any concerns to the project team specific to project safety, quality and/or schedule. Experience desired: • A minimum of 5 years working experience in the WNY construction industry in a labor supervisory capacity for at least 2 years, • OSHA 30-Hour safety training or wiliness to obtain upon hire., • Comprehensive knowledge of OSHA safety standards., • The ability to lead or delegate or participate as a team member as situations dictate., • A willingness to creatively solve problems leveraging the strength of the team., • Adaptable, positive, and clear communication and interpersonal skills. Total Compensation: Montante Construction offers a competitive total compensation package including: • Competitive base wages, reviewed annually with bonus potential, • A comprehensive benefit package including medical insurance with employer contribution towards premium, medical opt out credit, employer paid life and long-term disability insurance!, • 401k Retirement Plan with up to 4% employer match on contributions, • Voluntary Dental and Vision insurance, • Up to 15 days of paid time off (PTO) in year one, increasing with years of service, and paid holidays, • Financial insurance protection options which include short- and long-term disability, accidental death & dismemberment insurance, critical illness and accident insurance, legal and identity theft options, and pet insurance, • Training & Professional Development opportunities, • Community and Employee engagement events and initiatives

Job DescriptionConstruction Superintendent – Buffalo, NY Laland Baptiste, LLC is a construction management and consulting firm. Laland Baptiste provides innovative and professional services throughout all phases of the construction life cycle. We pride ourselves on being loyal and reliable to our customers, clients, and our greatest assets, our people. Laland Baptiste is dedicated to providing unparalleled services throughout the construction life cycle. These services include Construction Management, Program Management, Owners Representation, Resident Engineering, Inspection, Preconstruction Consulting, Change Order Review, Value Engineering, Administration Assistance, Document Control and Staff Augmentation. Our clients include the NYS Office of General Services, Dormitory Authority of the State of New York, NYC Health + Hospitals, NYC Department of Design and Construction, NYC Parks & Recreation, NYC School Construction Authority, NYC Economic Development Corporation, Battery Park City Authority, and NYS Parks, Recreations and Historic Preservation. As part of our continuous recruitment process, Laland Baptiste is seeking on-site Construction Superintendents. This Superintendent will have project experience in Higher-Education, Healthcare, or Buildings Rehabilitation, and willing to work in the Buffalo, NY Region. Scope: Construction Superintendent shall possess, at a minimum, six (6) years of experience involving large-scale building/rehabilitation projects preferably with a cost of $10 million or greater. Qualifications: • Associate’s degree in Construction Management or related field or a satisfactory equivalent of the combined education and experience. Bachelor’s degree preferred., • Minimum of 4 years’ experience shall be as an Assistant Superintendent or Inspector on large-scale, multi-contract or single prime building projects., • Must be able to develop/communicate a project work plan, monitor manpower and performance against that work plan, and be able to perform a detailed comparison of the design drawings against each other to ensure coordination between each of the various project trades., • Experience working on higher education projects (college/university preferred), including schedule and budget management experience on multi-disciplinary renovation projects., • Working knowledge of the principles of architectural design, mechanical, electrical and plumbing systems (MEP), and knowledge of construction industry practices and procedures., • Ability to interpret construction documents and possess an understanding of applicable construction codes., • Must be able to make decisions rapidly and under pressure., • Strong proficiency with MS Office and/or other construction software is required., • OSHA 30 certification., • Ability to lead, collaborate and interact effectively with a range of other project participants including architects, engineers, specialty consultants, contractors, and the Client., • Ability to work well under pressure and meet deadlines., • Strong problem-solving skills., • In depth understanding of safety protocols and regulations., • Must have a valid driver's license and reliable transportation. Pay Rate: $60.00-$75.00/Hourly Salary. Actual compensation will depend on the individual’s qualifications, education, skills, and experience. Benefits of Working at Laland Baptiste: Medical / Prescription Plan Dental / Vision Plan Life Insurance Short / Long Term Disability Plan Flexible Spending Accounts 401K Vacation, Holiday, and Personal Days Sick Leave Baptiste University - Continuing Education Laland Baptiste LLC, is an Equal Opportunity Employer Powered by JazzHR B5JaSqImQf

Job Description Principle Duties & Responsibilities • Perform inspections, leak investigations, and repairs on commercial roof systems including TPO, PVC, EPDM, modified bitumen, and built-up roofing., • Diagnose roofing issues and provide accurate, detailed repair reports., • Document findings and completed work using service software or company forms., • Perform periodic site visits to inspect and document roof construction progress, quality and coordination of work. Perform punch list inspections of completed work., • Communicate with clients and internal team members to explain issues and recommend solutions., • Ensure work is completed safely, efficiently, and to high-quality standards and in accordance with manufactures recommendations., • Maintain company tools, equipment, and service vehicles in clean and functional condition., • Comply with OSHA safety regulations and all company safety policies., • 2+ years of commercial roofing experience or construction service-related field, • Knowledge of various commercial roof systems and repair techniques., • Ability to identify leaks, perform water tests, and complete temporary and permanent repairs., • Basic understanding of rooftop mechanical equipment, exterior wall/window systems, • Comfortable working at heights and in outdoor environments year-round., • Valid driver’s license with a clean driving record., • Ability to lift 50+ lbs, climb ladders, and use roofing equipment safely., • Strong attention to detail and organizational skills., • Stoop, kneel, or crouch for extended periods of time., • Stand, walk, or sit for extended periods of time., • Use first aid equipment, a fire extinguisher and power and hand tools., • Lift, move and carry heavy objects weighing up to 25 pounds., • Ability to climb ladders up to 50 feet., • A company vehicle, gas card, and cell phone option will be provided to travel between properties., • Company branded clothing, boots, and weather-related gear provided., • Tools provided., • Health, dental, and vision insurance., • 401(k) with company match., • Paid time off and holidays., • Company raffles, discounts, and company events throughout the year., • Ongoing training and career advancement opportunities. Pay Range: $21.00 - $27.00 Hourly Please note that final offer amount will be dependent on geographic location, applicable experience and skillset of the candidate.

Job Description Reports to: Brand Manager Location: Store Location Does a dynamic, exciting and results driven fast-paced environment catch your attention? Are you ready to join a company with tremendous growth opportunities? At Stanton Optical our Sales Consultants create an easy and memorable experience for all of our patients and customers when assisting them throughout our unique sales process to fulfill their eyewear needs. We are looking to match self motivated individuals with a role where they are ultimately in charge of their earning and career potential. About us: Stanton Optical is among the nation’s fastest growing, full-service retail optical centers. We are dedicated to offering customer service and quality eyewear at affordable prices to our patients and customers. As a leading optical retailer, we offer some of the nation's most desirable optical brands Our team members share and support the Vision, Mission and Values of our parent company, Now Optics. These include: Vision: Modernizing the eye care experience for all people Mission: Making eye care easy Values: iCARE * Integrity: We see integrity as building a foundation of trust with our customers, employees and stakeholders by communicating honestly, ensuring consistency and delivering on our commitments. * Collaboration: We see collaboration as combining the talents of a diverse group, offering proactive communication and being open-minded to new ideas. * Accountability: We see accountability as taking initiative, delivering our best in all we do, accepting responsibility for our actions and taking ownership of results. * Respect: We see respect as prioritizing human relationships, being present, connecting with transparency and empathy. * Empowerment: We see empowerment as making purpose-driven decisions to support the company vision, showing appreciation for others, and taking care of the individuals we serve. Why join our winning team? • We are the fastest growing, founder-led, and privately owned eye care provider in the United States. We believe quality eye care should be easy, accessible, and affordable for all people. Stanton Optical, consistently rank among the nation’s top optical retailers., • We offer a flexible, dynamic work environment where we foster innovation and creativity. We encourage you to be proactive in sharing the great ideas you have to improve the business., • Eligible employees enjoy great benefits such as medical, dental, and prescription drug coverage, company paid life and short-term disability coverage and free eyeglasses. We also offer identity theft protection, pet insurance, and much more., • Paid time off that increases with seniority, • Professional development and promotion opportunities, • Employee recognition programs, • Employee Assistance Program (EAP), • Employees get 2 free eyeglasses (no dollar limit) every year, and Friends and Family discounts on our products!, • We offer competitive variable compensation opportunities and commission on sales. Greet our patients and customers as they enter the store, identify patients’ needs to ensure an easy and memorable experience while providing promotional products and services available. * Assists patients and customers to choose eyewear that best fit their budget requirements as well as eye care needs. * Troubleshoot and identify problems related to prescription. * Resolve customer complaints, diffuse unsatisfied patients, and provide solutions to remedy situations. * Attain sales goals established while complying with company and local policies and procedures. * Adhering to quality control standards including OSHA and other safety requirements. * Ensure brand standards by performing basic housekeeping duties when necessary. * Execute simple customer repairs, assemble lenses into frames and edge stock lenses to expedite delivery of eyeglasses, and ensure customer orders are delivered accurately and on time. * Ensure brand standards are met in the lab area, and notify management of equipment malfunctions, incomplete orders, incorrect lenses, etc. * Keep track of delivery time commitments to patients (Now Service, Ready When Promised) to ensure 100% compliance. * Other duties as assigned and required. Key Qualifications * You have 1+ year of proven track record of delivering outstanding customer service while exceeding sales goals in a fast paced retail environment * You have the ability to multitask, prioritize and be flexible with changing business needs in a team environment * You have the skills necessary to communicate effectively with a diverse group of people Are you the perfect fit? * Do you share our vision of modernizing eye care for all people and making eye care easy? * Do you have a high school diploma or equivalent required? * Are you passionate about outstanding customer/patient care and eager to share that passion with others? * Do you have schedule flexibility? Work hours will be determined based on business needs. * Optical experience is a plus Now Optics d/b/a Stanton Optical Brand is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. All employment decisions at our company are based on business needs, job requirements and individual qualifications, without regard to actual or perceived race, color, religion, sex (including pregnancy), national origin, age, disability or certain classifications based on genetic information, or any other characteristic protected by federal, state, or local laws, regulations or ordinances. If you have a disability and believe you need a reasonable accommodation in order to search for a job opening or apply for a position, email with your request. This email address is not for general employment inquiries or correspondence. We will only respond to those requests that are related to the accessibility of the online application system due to a disability.

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer-focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay The Service Technician II reports to the Service Manager and is an hourly, full-time position. S/he is a member of the RLKS Field Service team, whose responsibility is to ensure all customer requests are identified and addressed in a prompt, accurate, and professional manner with safety with the end customer always top of mind. This is a vital position for Stark Tech, enabling us in the HVACR equipment sales, service, and parts resale businesses that we operate. What are we looking for • High School Diploma or equivalent and 2-5 years of experience in HVAC, or the equivalent combination of education (technical school) and experience., • Must follow union qualification process for Journeyman standing., • Knowledge in all facets of the HVAC industry, including but not limited to Air Conditioning, Heating, Electrical, Boilers, Humidification, Dehumidification, and Refrigeration., • Must have universal EPA CFC certification., • Must have 10-hour OSHA certification., • Must be a highly motivated and an independent thinker., • Must be able to thrive in a fast-paced, high profile (often mission critical) customer setting. Ability to multi-task, work under pressure and meet deadlines required., • Knowledge of HVAC&R theory, solid mechanical, electrical troubleshooting, and repair skills required., • Ability to read wiring diagrams, mechanical layouts and blueprints required., • Must have experience installing clean, dry refrigeration piping systems and associated practices., • Operating knowledge of Microsoft office software and working proficiency with handheld devices, such as Smartphones, iPads, etc. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. Job Posted by ApplicantPro

Job Description Job Title: Millwright/Assembly - Custom Fabrication Shop Location: Buffalo, NY Company Overview: Join our custom metal fabrication shop as a key team member responsible for maintaining and repairing heavy machinery and hydro-mechanical equipment. We are looking for an experienced Industrial Mechanic who can take charge of a preventative maintenance program and perform mechanical, electrical, and assembly tasks on equipment such as water control gates and hydraulic-driven hoists. Key Responsibilities: * Ensure the proper operation of machinery and mechanical equipment in the shop. * Develop and implement a preventative maintenance schedule to minimize downtime. * Perform assembly and wiring on hydro-mechanical equipment like dam gates, wire ropes, and actuator-driven hoists. * Use tools like calipers, micrometers, and dial indicators for precision work. * Read and interpret blueprints, schematics, and follow written instructions for assembling components. * Inspect, align, and assemble parts such as gears, bearings, shafts, and motors for water control systems. * Operate overhead and jib cranes safely and efficiently. * Perform conduit installation using hand benders and fittings. * Maintain compliance with OSHA and EPA safety standards. * Clean tools, equipment, and work areas to ensure a safe, organized workspace. Skills & Qualifications: * Proven experience with machinery maintenance, including assembly and wiring of hydraulic, actuator-driven hoists, and water control equipment. * Ability to read schematics and perform electrical wiring. * Experience with precision tools and mechanical systems. * Comfortable working on scaffolding and other elevated platforms. * Familiarity with preventative maintenance programs and managing multiple projects. * Strong mechanical aptitude and proficiency with hand and power tools. * Ability to work independently and as part of a team. Education & Experience: * Vocational/Technical training preferred, or equivalent experience. * Experience in industrial maintenance, fabrication shops, or similar environments is preferred. Why Join Us? * Competitive pay based on experience. * Work on a variety of custom projects with hydro-mechanical systems. * Opportunities for growth and advancement within the company. * Comprehensive benefits package and a safety-first environment. Company DescriptionLinita Design & Manufacturing specializes in the manufacturing of Water Control Equipment such Intake Gates, Bulkhead Gates, Stoplogs, Trashracks. Cranes, Hoists, etc. We are also a heavy custom fabrication shop.Linita Design & Manufacturing specializes in the manufacturing of Water Control Equipment such Intake Gates, Bulkhead Gates, Stoplogs, Trashracks. Cranes, Hoists, etc. We are also a heavy custom fabrication shop.

Job Description About Good Carbon Co. At Good Carbon Co., we're redefining what it means to build and manage housing. As a vertically integrated real estate company, we focus on creating sustainable, energy-efficient, and affordable multifamily communities throughout Western New York. From concept to completion, we're a team of innovators, builders, and changemakers-committed to doing work that's not only smart, but good. About the Role We are seeking a skilled and reliable Journeyman Electrician to join our growing construction and property development team. This hands-on role will support the electrical installation and maintenance needs of both our new developments and existing properties. The ideal candidate is licensed, dependable, safety-conscious, and takes pride in delivering quality work. Key Responsibilities * Install, maintain, and repair electrical systems in residential and light commercial buildings * Interpret and follow electrical plans, blueprints, and technical diagrams * Ensure all installations are completed in accordance with local, state, and national electrical codes * Coordinate with project managers and construction crews on project timelines and job requirements * Troubleshoot issues and perform diagnostics using appropriate tools and techniques * Ensure job site safety and cleanliness, adhering to OSHA regulations and company policies * Mentor apprentices and support training of junior team members * Accurately complete work logs, inspection reports, and job site documentation What We're Looking For * Valid New York State Journeyman Electrician license * Minimum of 4 years of experience in residential or light commercial electrical work * Strong knowledge of NEC and local electrical codes * Proficient in reading blueprints, schematics, and technical diagrams * Ability to work independently and as part of a field crew * Comfortable working outdoors and in various field conditions * Strong problem-solving and communication skills * A passion for craftsmanship, sustainability, and quality Bonus if you have: * Experience with energy-efficient systems, solar integration, or smart home technologies * OSHA 10 or OSHA 30 certification * Familiarity with multifamily housing projects What We Offer * Competitive hourly wage based on experience * Opportunities for career growth and trade development * Supportive, values-driven company culture * Health and dental insurance * 401(k) with company match * Paid time off and holidays * Company-branded gear and tools provided

Job Description Overview Tradesmen International is looking to expand our team of qualified Trade Professionals for current & future projects in and around Buffalo, NY. Most positions are first shift with a pay range up to $32/hour based on experience & skill level. If you are an Electrician and want to work alongside other proven Craftsmen who emphasize safety, productivity, and superior workmanship, this is your chance to advance your career! Job Scope to Include any or all of the following for Commercial and/or Residential Projects: • Running & Pulling Wire, • Running & Bending Conduit, • Terminations, • Installing Lights & Outlets, • Low Voltage Work, • Previous Electrical Experience, • Tools for the Trade, • Proper PPE must be worn, • OSHA 10 is Preferred Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Vacation Pay, • Health insurance, • 401(k) profit-sharing savings plan, • Incentive programs Click here to visit Tradesmen’s full website.

Aramark Healthcare+ is seeking candidates for a General Manager, Plant Operations & Maintenance (POM) position at Catholic Health Mercy Buffalo Hospital, located in Buffalo, NY. The General Manager of POM (Facilities) plans, administers and directs all activities related to the Engineering department and will have client financial accountability, and be in compliance with the standards established by Aramark and the client. Establishes and maintains effective working relationships with other departments to provide a unified approach to POM management. Responsible for the development & growth of a large management team and hourly associates. Will also focus on meeting and exceeding operating and financial goals, client objectives, KPI metrics, and customer needs. Will have daily interaction with the client, client's customers and employees. This individual will be focused on ensuring operational excellence in the delivery of the services Aramark is contracted to provide. COMPENSATION: The salary range for this position is $135,000 to $150,000 a year. If both numbers are the same, that is the amount that Aramark expects to offer. This is Aramark?s good faith and reasonable estimate of the compensation for this position as of the time of posting.? BENEFITS: Aramark offers comprehensive benefit programs and services for eligible employees including medical, dental, vision, and work/life resources. Additional benefits may include retirement savings plans like 401(k) and paid days off such as parental leave and disability coverage. Benefits vary by location and are subject to any legal requirements or limitations, employee eligibility status, and where the employee lives and/or works. For more information about Aramark benefits, click here Aramark Careers - Benefits & Compensation. ? There is no predetermined application window for this position, the position will close once a qualified candidate is selected. Qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable law, including, but not limited to, the Los Angeles County Fair Chance Ordinance for Employers, the California Fair Chance Act, and the San Francisco Fair Chance Ordinance to the extent that those laws apply to the opportunity.? • Manage a large POM department, • Manage all facets of the organization including full P&L responsibility and controlling assets with operating revenue, and will manage labor costs, supply costs and inventories, • Complete and approve weekly and monthly financial operating reports, • Order, maintain, and use capital equipment efficiently, • Ensures compliance with all contract obligations, • Ensures the effective implementation of the comprehensive Safety Plan, driving full compliance of all safety rules, guidelines and protocols, • Optimize financial performance, process accuracy and logistics productivity by conducting operational audits and ensuring a high level of execution and compliance, • Drive operational efficiencies, labor/scheduling productivity, • Drive a positive work environment and utilize effective communication skills at all levels of the organization, • Provide overall direction and control to a large/complex account to achieve operating and financial goals, • Responsible for the training, development and performance management of personnel, operations managers and associates, • Deliver strong operational performance by ensuring compliance with Aramark Facilities Services and regulatory agency standards and programs and translating corporate strategy into front line operational tactics and will ensure compliance with all OSHA regulations and other, local, state, and federal government regulations, • Lead development of team ensuring high performance, talent succession planning, optimal staffing and employee engagement, • Establishes and maintains effective communications and business relationships with clients/customers, • Ensure that client objectives are fully met by maintaining active customer relationships including formal structured monthly business reviews, • Bachelor?s degree or equivalent experience, • CHFM - Certified Healthcare Facilities Manager preferred, • Minimum 5 to 7 years of experience in Facilities or POM management required, • Acute Care Hospital experience required, • Knowledge of facility related equipment, financial analysis and interpretation required, • Working knowledge of appropriate preventative maintenance of building systems including MEP, boilers, chillers, generators & HVAC/R equipment, • Knowledgeable of all regulatory compliance requirements including OSHA, DOH, CMS, Joint Commission, Life Safety and Environment of Care, • Ability to lead a union workforce preferred, • Previous construction management experience highly preferred, • Prior experience in mentoring and developing management level staff is required, as is experience leading an hourly team, • Demonstrated time management skills, resulting in the ability to manage multiple client relationships and prioritize time and resources accordingly., • Ideal candidates will possess a high energy level that is communicated to the team they will lead, • Demonstrate proven success in interfacing with a variety of organizational functions and considerable negotiation skills are also needed to drive results., • The ability to manage in a diverse environment with focus on client and customer services is a key success measure, • Highly developed interpersonal, analytical and communication (written and verbal) skills and experience are essential for success in this role Our Mission Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. At Aramark, we believe that every employee should enjoy equal employment opportunity and be free to participate in all aspects of the company. We do not discriminate on the basis of race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status or other characteristics protected by applicable law. About Aramark The people of Aramark proudly serve millions of guests every day through food and facilities in 15 countries around the world. Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. We believe a career should develop your talents, fuel your passions, and empower your professional growth. So, no matter what you're pursuing - a new challenge, a sense of belonging, or just a great place to work - our focus is helping you reach your full potential. Learn more about working here at ___ or connect with us on ___, ___ and ___.

Job Description About the Role: As an Electrician at Tonawanda Engine, you will play a critical role in ensuring the safe and efficient operation of electrical systems within our consumer support services environment. Your primary focus will be on installing, maintaining, and troubleshooting electrical wiring and equipment to support power distribution and commercial wiring needs. You will work closely with engineering and maintenance teams to balance electrical loads and ensure compliance with safety standards and regulations. This role demands a high level of technical expertise and attention to detail to prevent downtime and maintain operational continuity. Ultimately, your work will contribute to the reliability and safety of our electrical infrastructure, supporting the overall success of our facility. Minimum Qualifications: • High school diploma or equivalent., • Valid electrician license or certification as required by local regulations., • Proven experience in electrical wiring, commercial wiring, and electrical troubleshooting., • Strong knowledge of electrical systems, switchgear, and power distribution., • Associate degree or technical certification in electrical technology or related field., • Experience working in a consumer support services or manufacturing environment., • Familiarity with advanced electrical balancing techniques and modern electrical testing equipment., • Completion of an apprenticeship program or equivalent hands-on training., • Install, maintain, and repair electrical wiring, switchgear, and power distribution systems in commercial and industrial settings., • Perform electrical troubleshooting to diagnose and resolve issues promptly, minimizing operational disruptions., • Balance electrical loads to optimize system performance and prevent overloads or failures., • Pull wire and set up electrical systems according to blueprints, schematics, and safety codes. The required skills such as electrical wiring, switchgear handling, and power distribution are essential for daily tasks involving installation and maintenance of electrical systems. Electrical troubleshooting skills enable you to quickly identify and resolve faults, ensuring minimal downtime. Pulling wire and commercial wiring expertise are used regularly to set up and upgrade electrical infrastructure according to project specifications. Balancing electrical loads is critical to maintaining system stability and preventing equipment damage. Preferred skills like familiarity with safety standards and advanced testing equipment enhance your ability to work safely and efficiently, contributing to overall operational excellence. 1st shift Monday thru Friday 7:00am-3:30pm

Job Description About the Role: As an Electrician at our Tonawanda location, you will play a critical role in ensuring the safe and efficient operation of electrical systems within our consumer support services environment. Your primary focus will be on installing, maintaining, and troubleshooting electrical wiring and equipment to support power distribution and commercial wiring needs. You will work closely with engineering and maintenance teams to balance electrical loads and ensure compliance with safety standards and regulations. This role demands a high level of technical expertise and attention to detail to prevent downtime and maintain operational continuity. Ultimately, your work will contribute to the reliability and safety of our facility’s electrical infrastructure, supporting overall business performance. Minimum Qualifications: • High school diploma or equivalent., • Completion of an accredited electrician apprenticeship program or equivalent experience., • Valid electrician license or certification as required by local regulations., • Proven experience with electrical wiring, switchgear, and power distribution systems., • Experience working in a consumer support services or manufacturing environment., • Additional certifications such as OSHA safety training or NFPA 70E electrical safety., • Familiarity with computerized maintenance management systems (CMMS)., • Ability to read and interpret electrical blueprints and schematics., • Install, maintain, and repair electrical wiring, switchgear, and related equipment in compliance with electrical codes and safety standards., • Perform electrical troubleshooting to diagnose and resolve issues in power distribution and commercial wiring systems., • Pull wire and balance electrical loads to optimize system performance and prevent overloads., • Collaborate with maintenance and engineering teams to plan and execute electrical system upgrades and preventive maintenance. The required skills such as electrical wiring, switchgear operation, and power distribution are essential for daily tasks including installation, maintenance, and troubleshooting of electrical systems. Balancing electrical loads ensures system stability and prevents equipment damage, which is critical in maintaining continuous operations. Pulling wire and commercial wiring skills are applied when setting up new electrical circuits or upgrading existing infrastructure. Electrical troubleshooting is used regularly to quickly identify and resolve faults, minimizing downtime. Preferred skills like reading blueprints and using CMMS enhance efficiency and accuracy in planning and documenting electrical work, while safety certifications support adherence to industry standards. 2nd shift Monday thru Friday 3:00pm-11:30pm

Job Description Overview Tradesmen International is looking to expand our team of qualified Trade Professionals for current & future projects in and around Buffalo, NY. Most positions are first shift with a pay scale of $20-26/hour based on experience & skill level. If you are a Roofer and want to work alongside other proven Craftsmen who emphasize safety, productivity and superior workmanship, this is your chance to advance your career! Job Scope to Include any or all of the following for Commercial and/or Residential Projects: • Removing Old Roofing Materials, • Installing New Roofing, • Repairing Roofing and any Damages, • Installing Insulation and Membrane, • Bitumen, TPO, EPD, PVC, Metal, Asphalt, Single Ply, and/or EPDM Roofing, • Working on Flat and/or Pitched Roofs, • Basic Tools for the Trade, • Proper PPE must be worn, • OSHA 10 Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Vacation Pay, • Health insurance, • 401(k) profit-sharing savings plan, • Incentive programs Click here to visit Tradesmen’s full website.

Job Title: Patient Care Technician (PCT) – Behavioral Health Unit Job Description: We are actively hiring Patient Care Technicians (PCTs) for multiple behavioral health and psychiatric care units. The ideal candidate will have experience supporting individuals with mental health needs and will bring compassion, professionalism, and reliability to a fast-paced care environment. Key Responsibilities: • Deliver direct patient care with a focus on personal hygiene, feeding, mobility assistance, and emotional support, • Accurately take and record vital signs, including temperature, pulse, respiration, and blood pressure, • Assist patients with ambulation and transfers using proper techniques and assistive devices (e.g., Hoyer lifts), • Support patients with activities of daily living (ADLs) and monitor for behavioral changes, • Report any clinical concerns or incidents to nursing staff promptly, • Maintain a clean, safe, and therapeutic environment by following standard infection control protocols, • Record and document patient care activities accurately in electronic medical records Required Qualifications: • High School Diploma or GED, • Certificate from an accredited Patient Care Technician (PCT) program with training in EKG and phlebotomy, • Basic Cardiac Life Support (BCLS) certification (American Heart Association preferred), • Experience in a behavioral health or psychiatric care setting (required), • Strong communication, observation, and de-escalation skills, • Ability to perform physical duties such as lifting, transferring, and prolonged standing Additional Information: • Positions are on-site only — remote work is not available, • Must be comfortable providing care to psychiatric and behavioral health patients, including those in crisis, • PPE and training provided in accordance with OSHA and healthcare safety standards Pride Health offers eligible employee’s comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance and hospital indemnity), 401(k)-retirement savings, life & disability insurance, an employee assistance program, legal support, auto, home insurance, pet insurance, and employee discounts with preferred vendors.

Pay: $90,000.00 - $120,000.00 per year Job description: Construction Superintendent – Christa Construction, LLC Buffalo, NY Full-Time | $90,000–$120,000 / year (based on experience) Our Vision The contractor of choice, for every client and community we serve. Our Mission Christa Construction partners with clients, design teams, municipalities, and subcontractors to construct high-quality buildings that positively impact the community. Our promise is to approach every project with quality, safety, transparency, and accountability. About the Role Christa Construction is seeking a dedicated and experienced Superintendent to lead field operations on multi-family, wood-frame commercial construction projects. This role is critical in driving quality, safety, and project success from the ground up. Key Responsibilities Project Execution • Lead all on-site construction activities, • Ensure adherence to schedule, budget, and quality standards, • Maintain daily reports, project documentation, and updated drawings, • Enforce company and OSHA safety standards, • Maintain site-specific safety documentation and ensure subcontractor compliance, • Maintain 3-week look-ahead schedules, • Monitor lead times, material deliveries, and subcontractor workflow, • Conduct QA/QC checks throughout all phases of the build, • Manage preconstruction meetings, mock-ups, and closeout inspections, • 6–10 years of experience in wood-frame multi-family commercial construction, • Strong knowledge of construction methods, scheduling, and safety practices, • Proficient with MS Office, Procore, and construction management software, • Strong leadership, communication, and organizational skills, • Ability to walk, stand, climb, and navigate active construction sites, • Must have good vision, hearing, and general physical endurance, • Occasional lifting and use of ladders or scaffolding may be required At Christa Construction, we’re more than builders we’re partners committed to making a positive impact on every project we touch. If you’re ready to lead with integrity and deliver with excellence, we encourage you to apply.

Job DescriptionCompany Description Monro, Inc. Monro, Inc. is one of the nation’s largest auto service companies and major tire retailer. We own and operate more than 1,200 stores in 32 states and our stock trades on the Nasdaq (MNRO). The Monro family of brands includes some the most recognizable names in the industry—Monro Auto Service and Tire Centers, Mr. Tire, Tire Choice, amongst many more regional chains. Our dominance is driven by teammates who strive to provide a five-star experience and deliver consistent value to our guests and shareholders. At Monro, we understand that a 5-star guest experience begins with a 5-star teammate experience. In fact, we’re currently investing more than $100 million in store improvements, new technology, and career development through our own Monro University training platform. Destination Monro – Your Career is Here! Do you have what it takes to shape a better future for yourself and the automotive service industry? Our vision is to be America’s leading auto and tire centers, trusted by consumers as the best place in our neighborhoods for quality automotive maintenance and repairs. We’re looking for motivated individuals at every stage in their career who share our vision. Positions are available in our retail locations across our many brands, in field management, and in store operations at our Store Support Center in Rochester, New York. If you like helping others, as much as you like working on cars; if you enjoy being part of a team, solving problems, and building guest relationships; if you value honesty and integrity - we have a Destination for you at Monro. Contact us to learn more. Destination Monro! – Your career is here. Job Description About the Role: The Store Manager position is a salaried role. The Store Manager provides daily leadership to all positions within the store to include General Service Technicians, Technicians, Guest Care Specialists, and Assistant Store Manager. Reporting to the District Manager, the Store Manager is responsible for providing the day-to-day leadership to the store and teammates, including selecting, coaching, and developing store teammates. This position supports Monro’s vision to be America’s leading auto and service tire service centers, trusted by our guests as the best place in their neighborhoods for quality automotive service and tires by promoting products and services to guests. Salary Range: The range for this role is from $65,000 - $75,000 This role is eligible for additional compensation and incentives. Pay will be based on experience level. Responsibilities: • Develop sales and technical teammates to produce a consistent 5-star Guest experience., • Ensure sales goals are achieved by assisting in the development and implementation of sales plans, thorough knowledge of services and products and the automotive industry., • Introduce tire and service products to guests to maximize sales and guest satisfaction and loyalty., • Support teammates in establishing and maintaining a productive sales environment by training and developing teammates on all shop operations and guest services., • Provide direction and oversight to other technicians and assist where needed with services/repairs., • Ensure the store is effectively staffed by managing the recruiting, hiring, training, scheduling, evaluating, performance management, and development of teammates., • Ensure expense control through the management of payroll, telephone usage, store maintenance and repairs, supplies, utilities, and other controllable expenses., • Responsible for inventory management to include pulling tires and parts, unloading and stocking inventory., • Audit courtesy inspections performed by teammates., • Ensure store is in excellent condition and maintained to Monro standards for cleanliness and consistently in guest ready condition., • Schedule guest appointments and assign teammates according to their skill level for efficient and timely completion of vehicle services/repairs., • Achieve Monro’s sales goals by properly informing and recommending tire and service products and sales promotions., • Attend to all guest needs in areas of sales, service, complaints, and adjustments., • Build guest relationships to maximize customer satisfaction, loyalty, and retention., • Assist teammates in conveying repair and service needs to guests., • Understand and adhere to company policies and procedures, Governmental standards including environmental codes, and ASNI/OSHA standards. Consistent use of all required safety standards set forth in training and policies and procedures., • Maintain technical knowledge and capabilities to ensure proficiency through the timely completion of all required Monro University training courses and modules., • Operate, utilize, and maintain all equipment in a safe manner in accordance with Monro and equipment manufacturer guidelines including but not limited to lifts, welders, brake lathes, etc., • Perform other duties as assigned and required. Qualifications Qualifications: • High School Diploma or equivalent., • Demonstrated leadership experience in a retail/sales environment., • Proven ability to manage, drive and deliver financial results while controlling costs., • Ability to influence and motivate a team to achieve set goals and objectives., • Ability to problem solve, manage inventory, merchandising, and customer service., • Communications skills to effectively communicate with teammates and guests., • Complete all Monro required training with the guidelines and timing provided., • Must possess a current valid driver’s license and have a satisfactory Motor Vehicle Report (MVR) and have the ability to operate customer’s vehicles to conduct test drives. Profile Summary: • Guest and team focused mindset with extensive experience in customer-facing, customer-centric environments, • Excellent verbal and written communication skills with the ability to convey technical issues and write routine reports., • Business mentality with the drive to exceed established goals., • Possess basic math skills to calculate figures and amounts such as discounts, interest, and percentages., • Proactive with demonstrated proficiency in multi-tasking within a fast-paced environment., • Ability to take initiative in identifying problems, collecting data, and establishing facts to produce practical decisions and solutions., • Ability to effectively mentor, coach and develop teammates., • Ability to problem solve and resolve customer complaints. Work Environment & Physical Requirements: This job operates in an automotive shop environment. The job will have exposure to a moderate noise level, adverse weather conditions, chemicals, odors, dirt and dust. Store Managers must be able to complete the following but not limited to: • Ability to work flexible hours, days, evenings, weekends, and holidays., • Must be able to lift, carry and stock merchandise and supplies up to 50 lbs. without assistance., • Frequent standing and walking for long periods of time., • Frequent reaching overhead and below the knees, including squatting, bending, stooping, kneeling, twisting. Additional Information Benefits: • Performance based incentives, • Paid vacation and holidays, • Reimbursement for ASE Certifications, • Reimbursement for State Inspection Licenses, where applicable, • 401k eligibility immediately upon hire, • Direct Deposit, • Employee Discounts, • Healthcare, Vision, and Dental, • Employee Access Perks Monro conducts criminal background checks for those positions with security and/or financial responsibilities. All background checks are conducted in accordance with applicable federal, state and local law, including but not limited to the Fair Credit Reporting Act. No applicant will be automatically disqualified because of a criminal record. Rather, the Company will consider the nature of the crime(s), when it occurred, the applicant’s explanation, and the relationship to the position sought in making its determination. Monro Inc. is proud to be an Equal Employment Opportunity / Affirmative Action employer. It is our policy to consider for employment all individuals regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, gender, sex, sexual orientation, gender identity and/or expression, genetic information, veteran status, or any other characteristic protected by federal, state, or local law. Your next Destination! Growth Opportunity: At Monro we’re committed to helping our teammates grow their career through the combination of coursework, demonstrating leadership skills and open opportunities. Our teammates receive on-the-job training, company sponsored certifications, as well as course curriculum in Monro University that empowers them to advance to the next level of their careers. Monro, Inc. is an equal opportunity employer and affords equal opportunity to all applicants for all positions without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Job DescriptionJob Title: Maintenance Technician – Night ShiftLocation: Buffalo, NYHire Type: Direct HirePay Range: $36.00 – $42.00 per hour + shift differential ($2–$5/hr)Work Model: Onsite (Rotating 12-hour night shifts: Sun–Tues and every other Wed, 6:00pm–6:30am)Recruiter Contact: Samantha Marranca | 716-256-1271 | & Scope:Positional OverviewWe are seeking a skilled Maintenance Technician to support a high-growth manufacturing facility. This role is responsible for performing scheduled and unscheduled maintenance, troubleshooting, and continuous improvement activities on a wide range of industrial equipment and systems. The technician will work independently as the sole mechanic on shift, collaborating with plant teams to minimize downtime, maximize reliability, and uphold safety standards.This position requires strong electromechanical troubleshooting skills, the ability to thrive on a rotating night shift schedule, and a proactive, problem-solving mindset.Role & Responsibility:Tasks That Will Lead To Your Success • Perform scheduled and unscheduled maintenance on electrical, mechanical, hydraulic, pneumatic, and facility systems., • Troubleshoot and repair PLC- and VFD-controlled equipment, AC/DC motors and drives, industrial HVAC systems, and piping infrastructure., • Execute preventive maintenance tasks and equipment upgrades to ensure uptime and reliability., • Partner with other teams to conduct root cause analysis and drive continuous improvement., • Document all maintenance activities in the CMMS (Computerized Maintenance Management System)., • Support facility upgrades, process improvements, and expansion projects., • Maintain compliance with OSHA and safety standards., • Participate in daily shift handoff meetings and communicate effectively across teams. Skills & ExperienceQualifications That Will Help You Thrive, • 2+ years of hands-on maintenance experience in a manufacturing or industrial environment (5+ preferred)., • Strong electromechanical troubleshooting skills, including PLCs, VFDs, motors, drives, and HVAC., • Experience interpreting schematics, blueprints, and SOPs., • Forklift operation experience (certification a plus; training provided if needed)., • Ability to lift 50+ lbs. and work on your feet throughout 12-hour shifts., • Adaptability to seasonal warehouse/plant temperatures., • High School Diploma or GED required., • Valid driver’s license required., • Technical certification in Electro-Mechanical, Industrial Maintenance, Automation, or Electrical Systems preferred., • Experience in insulation, pulp & paper, or building materials industries a plus., • Familiarity with Lean Manufacturing or Six Sigma tools preferred.Compensation & Benefits, • Competitive pay: $36.00 – $42.00/hour + shift differential ($2–$5/hr)., • Benefits package available (details provided during process)., • Opportunities for professional development, certifications, and cross-training., • Annual reviews with potential compensation increases., • Advancement opportunities as the facility grows.

Job Description Schedule Shift: Rotating Shifts Hours: (12-hour shifts) Generous shift differential pay for weekend and extended-hour coverage What You’ll Do: Equipment Maintenance & Troubleshooting Perform both scheduled and unscheduled maintenance on a wide variety of manufacturing equipment, including: • Electrical, mechanical, hydraulic, and pneumatic systems, • PLC and VFD-controlled equipment, • AC/DC motors and drives, • Industrial HVAC and blower systems, • Piping and plumbing infrastructure, • Troubleshoot and resolve issues in mechanical and process control systems to minimize downtime, • Execute preventive maintenance and equipment upgrades to maximize uptime, • Partner with Engineering and other teams to uncover and address root causes of failures, • Participate in daily shift handoff meetings and communicate key activities, • Support projects related to equipment upgrades, process improvements, and facility expansion, • Maintain a safe working environment by following OSHA and company safety standards What You Bring: Experience & Skills • 2+ years of hands-on maintenance experience in a manufacturing or industrial environment, • Solid understanding of troubleshooting and repairing electromechanical systems, • Experience with PLCs, HMIs, motors, drives, HVAC, and facility systems, • Familiarity with schematics, blueprints, and following SOPs, • Proven ability to work independently while collaborating effectively with others, • Forklift operation experience (certification a plus, or we’ll train you!), • Ability to lift 50+ lbs. and be on your feet throughout your shift, • High School Diploma or GED required, • Drivers License required, • Technical certification or training in Electro-Mechanical, Industrial Maintenance, Automation, or Electrical Systems preferred Nice-to-Haves: • Experience in the insulation, pulp & paper, or building materials industries, • Ability to read schematics, blueprints, and follow SOPs About CleanFiber: CleanFiber makes high performance cellulose building insulation from recycled corrugated cardboard boxes, using a unique and patented process. CleanFiber’s proven technology and accelerating business is poised to disrupt a fast-growing segment of the building insulation market, while rapidly building a highly-profitable business. Cellulose insulation wins customers from fiberglass because of greater energy efficiency, and from foam because of its much lower price point. CleanFiber makes highly efficient cellulose insulation from recycled corrugated boxes, allowing us to challenge incumbent players who are reliant on diminishing supplies of recycled newsprint. With successful execution at our first facility, we believe we are well-positioned to rapidly seize market share on a national scale. We are a game changer!

Piper Maddox has partnered with a well-established EPC specializing in commercial and community-scale solar projects across New York State, with typical project sizes ranging from 1 to 7 MW. This company has built a strong reputation for delivering high-quality solar installations and has been recognized on Solar Power World’s 2025 Top Solar Contractors List. As part of their ongoing expansion, they are now seeking a skilled Project Manager to take full ownership of projects from contract execution through closeout, ensuring delivery on time, on budget, and to the highest standards. Key Responsibilities: • Lead and manage all aspects of solar project delivery from contract execution through closeout, • Maintain project schedules, budgets, and quality standards across multiple active sites, • Collaborate with internal engineering and design teams to develop and refine construction drawing sets, • Manage procurement of materials, equipment, and subcontractor packages, • Coordinate and lead subcontractor activity on-site, • Monitor and enforce job site safety in accordance with OSHA and company standards, • Ensure permit applications, interconnection requirements, and inspection processes are completed, • Lead client communication and project meetings; serve as point of contact throughout the project lifecycle, • Track and report on budget vs. actual costs and address potential risk factors proactively, • Oversee project closeout and ensure operations & maintenance manuals are completed We are looking for someone with a background similar to: • 5+ years of experience in construction project management (solar or electrical construction strongly preferred), • Proven background managing C&I ground-mount solar projects (ideally within an EPC environment), • Open to candidates from electrical contractor backgrounds with relevant site management experience, • Familiarity with OSHA regulations, permitting, and utility interconnection processes, • Self-starter with a hands-on, humble, and collaborative mindset, • Ability to travel to project sites across New York State as needed

Job Description Overview Tradesmen International is looking to expand our team of qualified Trade Professionals for current & future projects in and around Buffalo, NY. Most positions are first shift with a pay range of $20-35/hour based on experience & skill level. If you are a Carpenter and want to work alongside other proven Craftsmen who emphasize safety, productivity and superior workmanship, this is your chance to advance your career! Job Scope to Include any or all of the following for Commercial and/or Residential Projects: • Start to Finish Carpentry, • Metal Studs, Framing, • Rough Builds, • Trim Work (molding, installing cabinets, doors, windows, etc.), • Drywall, • Previous Carpentry Experience, • Tools for the Trade, • Proper PPE must be worn, • OSHA 10 is Preferred Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Vacation Pay, • Health insurance, • 401(k) profit-sharing savings plan, • Incentive programs Click here to visit Tradesmen’s full website.

Job Description The following responsibilities outline the Christa Construction experience and skill set requirements for an individual holding the position of project superintendent. Key Responsibilities • Jobsite Safety, • Schedule Management, • Daily Reporting, • Jobsite Communication and Coordination, • Entrepreneurial Spirit (Leading job with Authority), • Delivering the project High Level of Quality, • Thorough technical knowledge and understanding of all structural trades (Mandatory)., • Read and comprehend all Contract Documents (Mandatory), • Understands geotechnical, structural and materials testing requirements and procedures., • Thorough knowledge and understanding of crew size required for various levels of productivity in every critical path trade., • Knowledge of soil types and their properties along with the ability to read and comprehend a soils report., • Experience managing the installation of public utilities. Fully understands the timeframe for design, approval, and easement processes., • Knowledge of Sediment and Erosion Control. SWPPP, • Thorough technical knowledge and understanding of site development trades., • Thorough technical knowledge and understanding of all building envelope trades., • Thorough technical knowledge and understanding of all mechanical, electrical, plumbing and fire protection trades., • Thorough technical knowledge and understanding of all finish trade work., • Thorough understanding of plumbing, sprinkler, HVAC, and electrical, fair housing and ADA codes., • Experience managing, coordinating, and obtaining close-in inspections and certificate of occupancy., • Can perform a full submittal review, • Ability to prepare and maintain accurate and professional as-built drawings., • Manages the commissioning of the building. (If not officially commissioned then manage the MEP engineers’ inspections, punch lists, and mechanical startups and schedule and document all owner training.), • Ability to effectively manage and chair weekly subcontractor meetings and take notes to track and update accordingly., • Ability to work closely with the Project Manager to ensure project harmony., • Makes project status presentations at owner meetings., • Completes and maintains accurate and thorough daily reports., • Completes and maintains weekly and incident safety reports., • Manages and maintains an up-to-date, posted, and accurate set of contract documents., • Maintains accurate submittal files on the project., • Performs accurate takeoffs (lumber, trim, doors, etc.), • Is proficient and experienced with FTP sites, F-drive server access, use, and similar computer abilities., • Responsible for coordinating and documenting all required project inspections with the Town, Utilities, Third Party Agencies, insurance representatives, etc., • Thorough understanding of the critical path on a project, sequence of construction, project phasing and various trade durations., • Schedules and manages the project mock-up., • Ability to create and maintain an accurate “three-week look ahead schedule"., • General knowledge of the duration and crew size required to complete various tasks., • Thorough understanding of lead time requirements for materials, selections, and work to be performed by others., • Ability to assist the Project Manager in creating an accurate buyout schedule, and the ability to provide accurate dates for the submittal log to avoid late contract awards or material submittals, • Holds Preconstruction meetings, • Soils handling, placement, and testing, • Civil utilities (storm, sanitary, water) and public utility (Gas, electric, Phone, Cat) installations., • Concrete and Masonry preparation, placement, and testing., • Structural - steel / decking / joists and LG framing installation, details, layout, and structural review, • Wood framing practices, inspections, and structural and dimensional review, • MEP rough in practices, coordination, details, and inspection., • Life safety — Fire walls / Smoke walls / Fire caulking / UL assembly, • Insulation (Thermal and Sound) and Vapor barrier, • All Interior finishes (Drywall — carpet), • Exterior -Waterproofing / weather barrier / moisture barrier / air barrier, • Roofing installation, details, and inspections, • Siding and flashing, installation, details, and inspections., • Holds an OSHA 30 Hour certificate, • Obtains and maintains a first aid/CPR certification, • Consistently sets a good example for others (wears hardhat, boots, safety glasses, etc.), • Demonstrates the ability and willingness to maintain a safe jobsite including disciplining subcontractors as necessary, • Maintains easily accessible, up to date site specific Christa Construction safety manual., • Collects site specific subcontractor safety manuals from all subcontractors prior to them starting work on site., • Equipment, • Oracle Primavera Cloud - Intermediate, • Microsoft Excel - Intermediate, • Procore - Intermediate, • Note Vault - Intermediate Whether you see our Christa sign in front of a housing complex, on a college or hospital campus, or in front of a major athletic stadium, our goal is always the same—to build value for our clients, the facility’s end users and the communities these buildings will serve. That’s been the way since 1982.Christa has completed over $7.0 billion worth of construction throughout New York State. We have experience in the construction of multi-family, senior and student housing, commercial offices, municipality work, medical facilities, warehouses, hotels and restaurants.\r\n\r\nWhether you see our Christa sign in front of a housing complex, on a college or hospital campus, or in front of a major athletic stadium, our goal is always the same—to build value for our clients, the facility’s end users and the communities these buildings will serve. That’s been the way since 1982.