Parts delivery jobs in Baldwin, New YorkCreate job alerts

Position Summary: The Director, Manufacturing Engineering (ME Director) is responsible for supporting business goals including product cost and quality, schedule adherence and delivery on-time to customer demand. It is a hands-on position that is responsible for ensuring the manufacturing processes, tooling, equipment support the Safety, Quality, Delivery and Productivity goals of the business. This ME Director plays an integral part in plant operations, special projects, OPEX, and is responsible for developing and maintaining motivated team and for supporting budgetary and production targets. The position has direct reports but must be able to work in partnership with Engineering, Quality, Supply Chain and Production in support of the departmental objectives. Supervisory Responsibilties: • The Manufacturing Engineering team is responsible for developing the standard processes used to manufacture heat exchangers including selection and definition of all tooling, equipment, fixtures, and anything else related to the process. The team is responsible to ensure all production processes are defined using the standard work formats and templates as well as to create any training documents required to ensure production operators can perform the work in accordance with the documented standard., • Support and drive continuous improvements in manufacturing metrics including quality, yields, cycle time, productivity, and cost. Promote process improvement, and LEAN manufacturing methodologies and 5S processes., • Implement and drive continuous improvement activities through implementation of change management process and best practices., • Timely and thorough implementation of engineering changes. Actively partner in the creation and review of engineering changes when needed., • Establish and monitor overall performance for product and quality standards; recommend process improvements / quality control programs. Recommend changes in work practices to improve production standards and product quality., • Ensure the ME team is properly deployed to support the daily needs of the business, new product introduction, cost reduction projects, or other duties as needed., • Oversee the Operational Excellence (cost reduction) plans for the site. Coordinate and manage the projects at a tactical level and develop the project tracking tools to report out to senior management., • Coordinate, review, and present data for the purchase of capital equipment, tooling improvements to audiences at various levels of the company., • Provide technical support and recommendations to both internal and external customer technical/quality teams regarding process improvements, non-conforming parts, defects, and repair/rework., • Author annual performance reviews and develop continuing education and advancement paths for entire department. Required Skills and Abilities: • Must possess solid analytical skills in forecasting and anticipating production needs and capabilities., • Must be able to prioritize workload in a multitasking environment, short-term tactical along with longer term strategic activities., • Must be able to work independently with minimum supervision and have the ability to interact positively and motivate others, • Excellent verbal and written communication skills; fluency in Spanish is preferred., • Experience with MRP systems; preferably Oracle., • Proficient in Microsoft Office programs to include Teams, Word, Excel, and PowerPoint., • Willingness to work a flexible schedule to get the job done., • Exceptional communication skills; promoting teamwork and a positive work environment., • Experience should include build-to-order manufacturing management experience in medium volume/high-mix production environments, preferably in the military or aerospace industries., • Demonstrated history of successful change management and implementation of operational excellence improvements such as lean manufacturing, demand flow, and six sigma., • Strong ability to communicate with all levels of the organization from the production floor to the executive office; strong interpersonal, leadership, & organizational skills. Education and Experience: • Bachelor's degree in engineering, Manufacturing Engineering preferred, or other technical related discipline is required; MBA or other relevant advanced degree is preferred., • Minimum 8 years experience in a manufacturing environment, including managing salaried and hourly staffs., • Minimum 5 years using continuous improvement methodologies, LEAN, Six Sigma, etc. is preferred. Other • Due to contracts with the United States Government, the candidate must be either a US Citizen or Green card holder Physical Requirements: • None Compensation Employee Type: Salaried Salary Minimum: $175,000 Salary Maximum: $195,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.0 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 21,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK (NYSE:AME) is a component of the S&P 500. Visit for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) 263-8359. Nearest Major Market: Long Island Nearest Secondary Market: New York City

AutoZone - JobID: 43480 [Package Delivery Driver / Flex Driver] As a Commercial Driver at AutoZone, you'll: Drive company-provided vehicles, ensuring safe and timely deliveries of automotive parts to commercial customers; Load and unload parts accurately per route schedules; Collect returns, cores,

As a Delivery Driver, you will serve as the "Face of Factory Motor Parts. We are seeking a reliable and safety-minded Delivery Driver committed to providing exceptional customer service.

Job Description Northside Imports is seeking a Counterperson to become an integral part of our team! You will be responsible for selling auto part products, merchandise, and services in a retail setting in order to drive company revenue. RESPONSIBILITIES • Provide price quotes and other information to customers over the phone or in person., • Answering phone calls and directing to appropriate party., • Assist customer with order pickups., • Create customer invoices and process payments., • Process credit/debit card payments from customers. Assist in cash payments with our Accounting Department, • Build relationships with customers in order to better meet their needs., • Coordinate with others in the parts department to troubleshoot issues as necessary., • Handling customer complaints, issues, returns and exchanges JOB SKILLS: • A STRONG background AND knowledge in the automotive industry is a plus., • Ability to quickly learn new information and adapt to a flexible, changing, and fast-paced business., • A high degree of integrity and professionalism with customers and our teams., • Exceptional phone and in-person communication skills., • Ability to organize, multi-task and prioritize effectively., • A minimum of a High School Diploma or equivalent. Associate’s/Bachelor’s Degree candidates also desired.

Job DescriptionFord Truck Shop Service Advisor – Levittown Ford Location: Levittown, NY Schedule: Full-Time | 5-Day Work Week, Including Saturday Salary: $100,000 – $200,000+ per year (includes commission & bonuses) Levittown Ford is a proud member of the VIP Automotive Group of Long Island, known for its exceptional leadership, customer-focused culture, and long-standing success. As part of one of Long Island’s most respected auto groups, we offer more than just a job — we offer a career path built on growth, training, and support. At VIP Automotive Group, our purpose is to create exceptional value and experiences for every customer, going above and beyond our competition. Our mission is to be the foremost provider of automotive sales and service, empowering our staff to deliver memorable customer interactions and maintain our standard of excellence. ???? Why Join Us? * Professional, team-oriented work environment * Ongoing training and certification support * Opportunities for career advancement within a growing group * Recognition programs and employee appreciation * Access to tools and technology to ensure success ???? Click here to learn more about our dealerships: VIP Automotive Group | Levittown Ford ???? About the Role – Ford Truck Shop Service Advisor As a Ford Truck Shop Service Advisor, you will be the bridge between customers and our service team, specializing in Ford trucks and high-volume shop operations. This position requires a high-energy individual with a customer-first mentality, a commitment to excellence, and a drive to exceed service goals. Key Responsibilities: * Greet customers promptly and courteously, documenting concerns accurately * Schedule service appointments and collect vehicle/customer data when possible * Conduct walkarounds and test drives or arrange technician test drives * Review vehicle service history and recommend appropriate services * Explain maintenance and repair needs, emphasizing manufacturer standards * Prepare and present detailed cost estimates for labor and parts * Set and manage “promised times” for vehicle delivery * Coordinate workflow with dispatch and technicians * Monitor repair status and communicate updates or changes to customers * Obtain customer authorizations for additional repairs * Review and close repair orders accurately with clear documentation * Maintain up-to-date menus, forms, and pricing tools * Deliver final explanations of work completed and answer any follow-up questions * Ensure vehicles are parked, secured, and keys stored properly * Promote customer satisfaction and maintain high CSI scores * Assist with incoming phone calls and appointment setting * Inspect vehicles for bodywork and prepare estimates when needed * Maintain a clean, professional workspace and appearance Qualifications: * 2+ years of prior Service Advisor experience (Ford/truck experience preferred) * 1+ year of dealership experience required * Working knowledge of automotive systems and repairs * Excellent communication, customer service, and problem-solving skills * Experience with CDK, Reynolds & Reynolds, or other DMS systems is a plus * Valid driver’s license with a clean driving record Monday – Saturday 5-day work week Benefits Include: • Medical and Dental Insurance, • 401(k) Retirement Plan, • Employee Discounts on Vehicle Purchases, Parts, and Service, • Paid Time Off, • Supplemental Benefit Plans (Short-Term Disability, Long-Term Disability, Supplemental Life Insurance), • Comprehensive Employee Recognition Programs, • Opportunities for Career Advancement, • Professional Development Assistance, • Retirement Plan Schedule: Monday to Saturday Supplemental Pay Types: Bonus Pay Commission Pay

Job Description Purchasing Specialists are responsible for providing program support through the sales and program life cycle. The candidate will be required to support customers and make supply chain decisions from the onset of a request for quote to the conclusion of the order. The candidate will be required to utilize the company’s ERP system to provide real time information to key account customers, participate in monthly sales meetings, and track orders to document on time performance. Key responsibilities and accountabilities: * • Process customer requests and prepare competitive quotations based on deadlines., • Interface with Program Management to assure compliance to customer orders as necessary, • Provide acknowledgement of orders to our customers, • Vendor Negotiations, • Determining supply chain source to purchase from (sourcing), • General cradle to grave order management, • Reviewing the sales order for accuracy after it is generated in ERP system, • Assist in coordinating with operations to provide customer with real time order tracking, • Respond to customer follow up calls to track status on open quotations, • Escalate issues which cannot be easily resolved, • Resolve pricing and delivery issues with purchase orders as they arise, • Assist export compliance by ensuring proper documentation is furnished by customer when receiving an order i.e. end use statement, • Support Quality Assurance internal audit activities, • Follow all relevant QMS (Quality Management System) Procedures and Work Instructions, • Strategic decision making based on profitability and requirements, • Risk management skills throughout the entire project, • Qualifications:, • Prior material sourcing and project management experience, • MS office suite proficient, advanced Excel proficiency level desired, • Focused, motivated and organized individual, • Ability to handle multiple projects and deadlines, • Detail oriented and great degree of communications skills, • Prior use of Pentagon 2000 a plus but not required, • Ability to read and understand blue prints is of benefit but not required Preference will be made to candidates with prior experience in the Defense industry Company DescriptionSupporting domestic and international customers providing spare parts in support of Military Equipment.Supporting domestic and international customers providing spare parts in support of Military Equipment.

Job DescriptionThe Role: As a Senior Software Engineer, you will play a crucial role in designing, developing, and maintaining our commodity/energy production, trading, and logistics products, in an agile environment. You will be responsible for collaborating with cross-functional teams, developers, product managers to deliver high-quality software solutions. You are expected to implement best practices in coding, testing, and deployment, ensuring scalability, performance, and security. Strong problem-solving skills, excellent communication, and the ability to adapt to new challenges in a fast-paced environment is essential for this role.Key Responsibilities • Design and develop software utilizing common coding standards and design patterns for API’s and interfaces in a variety of languages - C/C++, Java and/or C#, • Diagnose and debug new and existing software as part of our extensive trading system using Microsoft Visual Studio and other modern debugging tools, • Interact with the business experts and customers to understand the end user requirements and collaborate within engineering teams to build robust solutions, • Collaborate with local and remote team members across different time-zones, • Promote best practices in coding, design, and architecture, • Contribute to developing and refining development processes to enhance quality and productivity, • Coach and mentor junior members of the team, • Participate in architecture discussions to share experiences and provide advice, • Participate in stakeholder and customer conversations and demonstrationsRequired Skills, Experience and Qualifications:, • BS degree in Computer Science from a reputed university, • 6+ years of hands-on experience in coding and designing complex, enterprise, applications, • Strong programming skills in C, • Experience developing SQL and working with relational databases (Oracle, MSSQL), • Strong analytical and problem-solving skills, • Excellent communication skills, • Experience working in an agile team setting across different time-zones and countries, • Ability to coach and mentor junior members of the team, • Java and/or C# .NET experience is a plus, • Strong development experience using design patterns, object-oriented design, and SOLID principals, • Experience with developing financial or commodity/energy trading software is a plus

Job Description iRocket is pushing the frontier of reusable rocket propulsion. We’re looking for a Turbo Pump Engineer to design, analyze, and test turbomachinery for our reusable engines. The Role • Design, model, build, and test high-performance turbopumps (inducers/impellers/diffusers) for cryogenic rocket engines., • Perform hydrodynamic, aerodynamic, bearing, and rotor-dynamics analysis for rotating assemblies., • Develop manufacturing plans and build books, manage tolerance stack-ups, and ensure as-built compliance., • Monitor performance trends, analyze cavitation, vibration, thrust-balance, and clearance growth., • Execute root-cause investigations, iterate designs to improve cost, lead-time, and reliability., • Bachelor’s degree in Mechanical or Aerospace Engineering., • 3+ years of turbomachinery or rocket-engine component experience, including design/build/test of turbopumps or related systems., • Strong knowledge of fluid/rotordynamics, cryogenics, bearings, and rotating machine behavior., • Proficiency in CAD (Siemens NX, SolidWorks, etc.), CFD/FEA, and test instrumentation., • Experience with machined, additively-manufactured parts, weldments, fasteners, seals, and rotating assemblies., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Power-Flo Technologies is now hiring a full-time warehouse associate to join our New Hyde Park team. We are the premier provider of supplies, services, and solutions- housing electrical, HVAC, and plumbing supplies. Full-Time. Monday - Friday. 9:30 AM - 6:30 PM. Salary Range: $16.50 - $20/hour Benefits: • Medical, Dental and Vision plans, • PTO Program, • Paid Holidays, • EAP, • 401K Key Responsibilities : • Perform basic warehouse work to include, removing sold parts from stock, placing received parts on shelves, processing items for shipment, receiving, driving (as needed), organizing etc., • Pull and stage orders for shipment, • Organize Inventory, • Cycle Count, • Maintain a clean Driver's License to operate company vehicles, • Load, unload, prepare, inspect, and occasionally operate delivery vehicle (box trucks and vans), • Current, valid, and clean NYS driver’s license (7 years' clean driving record) to operate company vehicles as needed (no CDL required), • 1+ years of warehouse experience required, • Experience with cycle counting, consolidation, and inventory management., • Ability to obtain & maintain DOT certification, • Ability to lift 50 pounds and push or pull over 100 pounds, • Ability to follow processes, procedures, and policies, • Ability to work well independently and on a team, have a great attitude, and be willing to learn, • Ability to communicate in verbal and written from with functional English skills, • Excellent organizational and time management skills, • Forklift experience a plus, • Experience with UPS, DHL, and/or FedEx a plus, • Ability to work in a fast-paced warehouse environment with varying temperatures. We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS. For this and other opportunities check out

Job Description Director of Manufacturing - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. EDUCATION AND/OR EXPERIENCE • Bachelor’s degree in engineering, Manufacturing Engineering preferred, or other technical-related discipline is required; MBA or other relevant advanced degree is preferred., • Minimum 8 years of experience in a manufacturing environment, including managing salaried and hourly staff., • Minimum 5 years of experience using continuous improvement methodologies, LEAN, Six Sigma, etc. is preferred. SUMMARY OF POSITION The Director of Manufacturing Engineering (ME Director) is responsible for supporting business goals, including product cost and quality, schedule adherence, and timely delivery to meet customer demand. It is a hands-on position responsible for ensuring that manufacturing processes, tooling, and equipment support the business's Safety, Quality, Delivery, and Productivity goals. This ME Director plays an integral part in plant operations, special projects, and is responsible for developing and maintaining a motivated team and for supporting budgetary and production targets. The position has direct reports but must be able to work in partnership with Engineering, Quality, Supply Chain, and Production in support of the departmental objectives. SUPERVISORY RESPONSIBILITIES • The position has direct reports but must be able to work in partnership with Engineering, Quality, Supply Chain, and Production in support of the departmental objectives. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Responsible for developing the standard processes used to manufacture heat exchangers, including selection and definition of all tooling, equipment, fixtures, and anything else related to the process. The team is responsible for ensuring all production processes are defined using the standard work formats and templates, as well as creating any training documents required to ensure production operators can perform the work in accordance with the documented standard., • Design and develop any tooling or fixtures needed to support the production processes., • Support the Operations team in the achievement of KPI’s related to shipping volume targets, on-time delivery, past due backlog, customer lead time, efficiency, utilization, and overtime premium expense., • Support and drive continuous improvements in manufacturing metrics, including quality, yields, cycle time, productivity, and cost. Promote process improvement, LEAN manufacturing methodologies, and 5S processes., • Implement and drive continuous improvement activities through the implementation ofthe change management process and best practices., • Timely and thorough implementation of engineering changes. Actively partner in the creation and review of engineering changes when needed., • Establish and monitor overall performance for product and quality standards; recommend process improvements/quality control programs. Recommend changes in work practices to improve production standards and product quality., • Ensure the ME team is properly deployed to support the daily needs of the business, new product introduction, cost reduction projects, or other duties as needed., • Oversee the Operational Excellence (cost reduction) plans for the site. Coordinate and manage the projects at a tactical level and develop the project tracking tools to report out to senior management., • Coordinate, review, and present data for the purchase of capital equipment and tooling improvements to audiences at various levels of the company., • Provide technical support and recommendations to both internal and external customer technical/quality teams regarding process improvements, non-conforming parts, defects, and repair/rework., • Author annual performance reviews and develop continuing education and advancement paths for the entire department., • Provide oversight for manufacturing activities in our Mexico facility., • Minimal travel expected. Potential travel to a facility in Mexico in support of overall business objectives. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Must possess solid analytical skills in forecasting and anticipating production needs and capabilities., • Must be able to prioritize workload in a multitasking environment, short-term tactical, along with longer-term strategic activities., • Must be able to work independently with minimum supervision and have the ability to interact positively and motivate others, • Excellent verbal and written communication skills; fluency in Spanish is preferred., • Experience with MRP systems, preferably Oracle., • Proficient in Microsoft Office programs, including Teams, Word, Excel, and PowerPoint., • Willingness to work a flexible schedule to get the job done., • Exceptional communication skills; promoting teamwork and a positive work environment., • Experience should include build-to-order manufacturing management experience in medium volume/high-mix production environments, preferably in the military or aerospace industries., • Demonstrated history of successful change management and implementation of operational excellence improvements such as lean manufacturing, demand flow, and six sigma., • Strong ability to communicate with all levels of the organization from the production floor to the executive office; strong interpersonal, leadership, & organizational skills., • Familiarity with assembly, welding, brazing, machining, and testing processes is desired., • Demonstrated knowledge of and familiarity with a variety of lean tools and methodologies, including, but not limited to:, • VSM, Standard Work, Pull Systems & Kanban, Integrated Business Planning, Daily Management, 5S/Visual, • Management, 3P, SMED, TPM, Variation Reduction, and Six Sigma. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $175,000 to $200,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job DescriptionThe Role: This is an exciting opportunity to join ION as a Technical Consultant. As a Technical Consultant, you will be responsible for supporting client requests as well as maintaining client’s extensions, interfaces, and processes following best practices. Key Responsibilities:● Assume hands-on Center of Excellence (COE) duties for Openlink Endur and/or Findur throughout the engagement. Those include but not limited to, Business as Usual (BAU) support, static data maintenance, managing of client’s custom code and interfaces, running End of Day (EOD) activities, performing minor enhancements, fixes, and configuration of the system, liaising with ION’s Support Services team on core bugs or enhancements. ● Attend Product trainings to gain knowledge of the system’s functionality, architecture, and technical components.● Gain proficiency in one or more business areas.● Follow documentation standards and resolution process flow for all deliverables.● Follow delivery methodology standards.● Track deliverables to estimates and deliver on time. ● Keep Manager and engagement owner(s) informed regarding the status of assigned responsibilities.● Maintain full chargeability on client account(s) as assigned.● Travel to customer site to work on projects as needed.● Participate in requirements analysis, custom code development (design/configuration/testing) and provide support for the client’s business needs with some assistance from the team lead.● Gather and document technical requirements with guidance from lead, code to specifications.● Demonstrate strong reporting and development skills.● Adhere to ION’s best practices. ● Participate in Product deployment and configuration at client site or ION Cloud with some assistance from the team lead.● Gather and document system requirements, test plans/results, and any other deliverables required by the engagement.● Gain proficiency in one or more technical area for the system (interfaces, deployment, performance tuning, database analysis, etc.)● Setup internal ION Product Environments for testing and validation as needed.● Some travel to client site may be required. ● For EOD support, must overlap with US clients’ EOD run hours typically from 6pm to 11pm US Central Time.● For BAU support, must completely overlap EMEA CET hours and some US Eastern time coverage up to 12pm ET. Required Skills, Experience and Qualifications: • Openlink Endur/Findur Product experience in BAU and EOD support activities per role profile, • BAU support for lower complexity items such as reports and running internal processes, • Running EOD and troubleshooting as needed, loading prices, familiar with Openlink troubleshooting steps, log viewer configurations, reruns, etc., • Connex message hospital troubleshooting and reprocessing is a plus, • Worked on at least Openlink V18+, • Some exposure to OpenJVS, • Java knowledge as a foundation is required., • Bachelor’s or Master’s degree in Computer Science, Engineering, Finance, Accounting, Economics, or a directly related IT field., • 2+ years’ industry experience in Software Design and Development or deployment, • Experience with one or more of the following technologies: C# .NET, Java, C++, Soap Webservices, • Minimum 2-year experience with one or more of the ION products or another ETRM/CTRM, • Experience in designing, configuring, and troubleshooting installations of enterprise software in client environments is preferred., • Experience with RDBMS such Oracle or MS SQL Server is required., • Experience with writing SQL scripts in Oracle or MS SQL, • Experience with Interface implementation following industry standard integration patterns., • Fundamental networking knowledge, • Ability to follow system deployment steps with little guidance from senior team members, • Ability to follow design specifications with little guidance from senior resources., • Experience working with Integrated Development environments such as Visual Studio, Eclipse, Visual Studio Code, • Experience with source control and continuous integration tools (GIT, TFS, Confluence, Bamboo) and issue tracking systems (Jira, NetSuite) is required., • Experience with office productivity tools such as Word, Excel, PowerPoint, and SharePoint, • Strong understanding of relational database concepts, • Strong Object-Oriented Skills, • Strong analytical and problem-solving skills, • Good written and oral communication skills, • For on-site consultants, ability to work onsite at client locations as needed., • Ability to work as part of a project team structure

Job DescriptionDescription: Who We Are United Ag & Turf NE is a John Deere Dealership with multiple locations across the Northeast. We service customers in a variety of industries such as commercial, construction, agricultural, as well as consumers. United Ag & Turf strives for exceptional customer service throughout all our locations and departments including parts, sales, and service. United sees an incredible opportunity in the Northeast to continue to expand the John Deere brand. We will continue to invest heavily in the region, building new facilities, updating and upgrading operations and empowering the business to continue to bring on talented, hardworking people to the team. United Ag & Turf is a sister company to United Construction & Forestry, so the opportunities for our employees to leverage career growth and advancement are endless. We invite you to join us now, as this is just the beginning. What You’ll Get • Bonus Program, • Training through John Deere University, • A comprehensive employee benefits plan that includes medical, dental, vision, and 401K Match, • Referral Bonus, • Earned PTO, • Employee Assistance Program, • Paid Company holidays, • Company Paid Life Insurance, • Great Work/Life Balance, • Opportunities for advancement Schedule: Monday – Friday 1st shift – Saturdays as needed United Ag & Turf NE is looking for a Service Writer. This position is responsible for assisting the Service Department with customer service needs, opening & closing of work orders, activities in pre-delivery of new equipment, repair and reconditioning of the new and used trade-in equipment, daily operations of shop functions, field service function and delivery or vehicle functions. What You’ll Do • Advise customers on technical problems, scheduling customer service needs, planning assigned jobs to work orders containing job information and specifying job instruction, identifying customer and machine, • Assist in the appraisal and quotes of repair work coming into the shop and discuss with the Service Manager the service required, both in parts and labor, • Schedule shop assignments, field service work, and truck requirements for pickup and delivery of equipment, • Process warranty claims, • Establish or adjust work procedures to meet schedules and deadlines., • Opening and closing of work orders to ensure timely closing to meet company goals, • Supervises all shop activities when the Service Manager is away from branch, • Proactively seek and participate in available company-sponsored training, to develop and advance knowledge base and skill set, • Ability to use standard desktop load applications such as Microsoft Office and internet-based functions, • Positive attitude, • Excellent oral communication and written skills, • Strong organizational skills, • Provide robust customer service to internal and external customers, • 1 year of experience in Service Department operations The physical demands described here are representative of those that must be met by employees to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of the job, the employee is required to stand, sit, talk, hear and use hands and fingers to operate a computer keyboard and telephone, • Specific vision abilities required by this job include close vision requirements, • Hearing ability is sufficient to communicate with others in person or over the phone, • Light to moderate lifting may be required (up to 50 pounds), • Ability to reach, stoop, kneel, and bend as needed

Job Description Power-Flo Technologies is now hiring a full-time warehouse associate to join our New Hyde Park team. We are the premier provider of supplies, services, and solutions- housing electrical, HVAC, and plumbing supplies. Full-Time. Monday - Friday. 8 AM - 5 PM. Salary Range: $16.50 - $20/hour Benefits: • Medical, Dental and Vision plans, • PTO Program, • Paid Holidays, • EAP, • 401K Key Responsibilities : • Perform basic warehouse work to include, removing sold parts from stock, placing received parts on shelves, processing items for shipment, receiving, driving (as needed), organizing etc., • Pull and stage orders for shipment, • Receive and inspect incoming shipments, ensuring accuracy and proper storage., • Organize Inventory, • Cycle Count, • Maintain a clean Driver's License to operate company vehicles, • Load, unload, prepare, inspect, and occasionally operate delivery vehicle (box trucks and vans), • Current, valid, and clean NYS driver’s license (7 years' clean driving record) to operate company vehicles as needed (no CDL required), • 1+ years of warehouse experience required, • Receiving experience, • Experience with cycle counting, consolidation, and inventory management., • Ability to obtain & maintain DOT certification, • Ability to lift 50 pounds and push or pull over 100 pounds, • Ability to follow processes, procedures, and policies, • Ability to work well independently and on a team, have a great attitude, and be willing to learn, • Ability to communicate in verbal and written from with functional English skills, • Excellent organizational and time management skills, • Forklift experience a plus, • Experience with UPS, DHL, and/or FedEx a plus, • Ability to work in a fast-paced warehouse environment with varying temperatures. We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS. For this and other opportunities check out

As a Delivery Driver, you will serve as the "Face of Factory Motor Parts.

Job Description Gregorys Coffee is a family run company that puts people first. Joining our team means joining a community of baristas whose aim is to provide an amazing guest experience for anyone who walks through our doors. If you are interested in being part of a company that is focused on making everyday special for our guests and our team, Gregorys is the company for you. Duties and Responsibilities include the following. Other duties may be assigned. • Responsible for learning and maintaining company standards and protocols., • Responsible for learning, understanding, and being able to speak knowledgeably about the company and the coffee program., • Responsible for knowing and being able to speak about all coffees served in the shop including but not limited to the coffee's components, history, and how to brew those coffees., • Operates coffee brewing equipment, grinders, scales, timers, water towers, point of sale systems, and mobile payment system., • Restocks all areas of store including coffee bar, & back rooms, • Performs opening, closing, and mid-day tasks., • Responsible for learning and perfecting latte art., • Assists in maintaining order and cleanliness of the store through things such as but not limited to sweeping , mopping, cleaning drains, taking out trash, surface cleaning, and dishes., • Provides guests with a memorable experience., • Responsible for taking guest orders and ensuring a complete and accurate order., • Resolves guest complaints with tact and professionalism or alerts attending leader on staff to assist., • Responsible for receiving and signing for orders from suppliers., • Receives deliveries and checks for quality of items delivered as well as accuracy of delivery based on invoice., • Responsible for taking and recording temperatures as required., • Responsible for working in a high volume environment where efficiency, service, and quality must be maintained - crafts each drink with care., • Receives deliveries and checks for quality of items delivered as well as accuracy of delivery based on invoice.*, • Maintains health department standards within the store., • Keeps store clean, stocked, and organized including but not limited to pastry case, condiment station, merchandiser, grab and go refrigerator, bathroom, and walk-in refrigerator., • Abides by the employee dress code protocol., • Displays a positive attitude, passion for coffee, and believes each drink brings value to the customer.Qualifications:, • To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Language Ability:, • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.Math Ability:, • Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry.Reasoning Ability:, • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.Computer Skills:, • To perform this job successfully, an individual should have knowledge of Square point of sale system and Timestation software.Certificates and Licenses:, • Department of Health and Mental Hygiene certificate preferredKnowledge, Skills, and Other Abilities:, • Time management skills, • Oral and written communication skills, • Professionalism skills, • Ability to keep a basic level of hygiene, • Ability to compromise and collaborate with othersPhysical Demands:, • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • While performing the duties of this job, the employee is regularly required to stand, walk, use hands, reach with hands and arms, talk or hear, and taste or smell. The employee is frequently required to climb or balance and stoop, kneel, crouch or crawl. The employee is occasionally required to sit. The employee must regularly lift and/or move up to 25 pounds.Work Environment:, • The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • While performing the duties of this job, the employee is regularly exposed to work near moving mechanical parts. The employee is frequently exposed to wet or humid conditions (non-weather). The employee is occasionally exposed to work in high, precarious places, risk of electrical shock, and vibration., • The noise level in the work environment is usually moderate., • Job Types: Full-time, Part-time, • FLSA Status:Non-Exempt We use eVerify to confirm U.S. Employment eligibility.

Job Description Join Our Team at Garden City Jeep – A Proud Member of VIP Automotive Group! Garden City Jeep is part of the VIP Automotive Group of Long Island, known for its exceptional leadership and customer-focused culture. We offer a professional work environment, continuous training, and the opportunity to grow your career with one of Long Island’s most successful auto groups. At VIP, we’re committed to creating exceptional value and memorable experiences for every customer. Our mission is to be the leading provider of automotive sales and service by empowering our team members to exceed expectations. We believe in supporting our employees with opportunities for growth, hands-on training, and advancement within our organization. Click the link below to learn more about our group and dealership: VIP Automotive Group Full-Time Opportunity * 5/6 Day Work Week * ???? Potential for a Six-Figure Income! * ???? Paid Training Provided! * ???? Previous Automotive Sales Experience is a Plus! * Weekend availability required Job Overview: We are looking for enthusiastic Automotive Sales Representatives to join our dynamic team. In this role, you will work with customers to understand their vehicle needs, provide expert product knowledge, and deliver an exceptional purchasing experience. If you are motivated, goal-driven, and passionate about helping people, this is a fantastic opportunity to achieve financial success in the automotive industry. Key Responsibilities: * Achieve sales and leasing goals for new and used vehicles while maintaining dealership standards for gross profit, volume, and customer satisfaction. * Assist customers in selecting vehicles by identifying their needs and preferences. * Provide detailed information on vehicle features, performance, and optional equipment. * Conduct vehicle test drives and demonstrate product benefits. * Maintain a professional, customer-centric approach throughout the sales process. * Ensure timely delivery of sold vehicles and complete all required paperwork accurately. * Collaborate with the finance and insurance department to finalize sales. * Stay informed on all dealership promotions, manufacturer incentives, and product updates. * Build strong customer relationships through follow-ups and personalized service. * Promote dealership services and schedule the customer’s first service appointment. * Participate in training programs and sales meetings to enhance product knowledge and skills. Qualifications: * Previous automotive sales experience is preferred, but we are willing to train motivated candidates. * Strong interpersonal and communication skills. * Goal-oriented mindset with a commitment to achieving and exceeding sales targets. * Ability to thrive in a fast-paced, team-oriented environment. * Proficiency in using CRM systems and dealership sales tools. * Valid driver’s license and clean driving record. Compensation: * Salary: $65,000 - $100,000+ per year, inclusive of commission and bonuses. Benefits: * Medical and Dental Insurance * 401(k) Retirement Plan * Employee Discounts on Vehicles, Parts, and Service * Paid Time Off * Supplemental Benefits (Short-Term and Long-Term Disability, Supplemental Life Insurance) * Employee Recognition Programs * Opportunities for Career Advancement * Professional Development Assistance * Retirement Plan Work Schedule: * Monday to Friday * Weekend availability required Supplemental Pay Types: * Bonus Pay * Commission Pay

As a Delivery Driver, you will serve as the "Face of Factory Motor Parts. You will be responsible for the delivery of merchandise in a safe, prompt, and professional manner leaving a positive impact, and completely satisfy our customers. We are seeking a reliable and safety-minded Delivery Driver co

Assist other Parts department employees with pulling orders for delivery. Kenworth Northeast is an independently owned truck dealership supplying the northeast region with The World's Best® heavy and medium duty trucks and parts. For more than a decade, Kenworth Northeast has operated Full-Service