Trabajos performance test engineer en Edison, New JerseyCrear alertas

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods — and eventually people — move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality. As a Mission Systems Engineer at Reliable Robotics, you will be a part of the Systems team and will report to the Systems & Safety Manager. The Systems & Safety Team is responsible for architecting systems that support novel safety-critical functions, establishing development methodologies for new technologies, and complying with the federal regulations. As part of an experienced multi-disciplinary team, you will contribute to expanding the aircraft's mission and functional capabilities. Your first-hand pilot experience and your engineering experience in design and development will further strengthen the team's ability to meet rigorous expectations of stakeholders and certification authorities. You will collaborate with members from other groups within Reliable Robotics to develop new and novel systems necessary for unmanned aircraft operations. Responsibilities In your role as a Mission Systems Engineer you will contribute to the development of prototypes and certifiable safety-critical flight systems in a dynamic start-up work environment Define and document mission-related aspects of future aircraft operation using insight from a pilot’s perspective Define and communicate strategies and plans for type certification and operational approval Develop training and support documents needed to deploy autonomous systems in an operational environment Support system architecture development and assess trade-off studies regarding performance, complexity, risk, and effort Capture system requirements and interfaces to drive avionics hardware and software development Perform operational safety assessments in support of experimental and production missions Provide engineering expertise in the design, development, test and validation of vehicle level functions and performances You’ll also have the opportunity to interact with other domains within Reliable Robotics and become involved in a broad task spectrum not limited to typical system engineering activities Basic Success Criteria Bachelor’s Degree of Science or Engineering in Mechanical, Electrical, Aerospace, or related discipline FAA-Certificated Pilot (Commercial, or Airline Transport) or Dispatcher with two or more years of operational experience under 14 CFR § 135, 14 CFR § 121 or Corporate Flight Operations Broad experience from 7+ years of designing various systems, integrations, and testing of complex safety-critical aerospace systems or equivalent technology Preferred Criteria Advanced Degree of Science or Engineering in Mechanical, Electrical, Aerospace, or related discipline Creative problem solver that can bring multiple disciplines together with the ability to assess risk and make design and development decisions based first principles without all available data Experience certifying flight critical systems, hardware, and software via ARP4754A, ARP4761, DO-254, and DO-178C respectively This role is critical to us at Reliable Robotics, because it works to convert the real world challenges of piloting an aircraft into requirements for an aircraft system that flies itself. This role can be remote, or located at our facility in Mountain View, California. Must be willing to travel up to 10% of the time. This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant’s capacity to perform in compliance with U.S. export control laws. All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis. At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need. If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to work@reliable.co

Founded in 2015, Shield AI is a venture-backed deep-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include the V-BAT aircraft, Hivemind Enterprise, and the Hivemind Vision product lines. With nine offices and facilities across the U.S., Europe, the Middle East, and the Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit Follow Shield AI on , , and _. Job Description:Shield AI is seeking a Principal Fuel Systems Engineer to lead architecture, development, and validation of fuel systems for advanced AI-powered aircraft. In this role, you’ll own the full lifecycle of fuel system design—from concept through flight testing—while mentoring others and driving technical excellence across our growing air vehicle portfolio. You’ll tackle high-impact challenges: enabling efficient long-endurance flight, optimizing aircraft center of gravity, and developing robust, certifiable systems that perform flawlessly in extreme conditions. On-site or hybrid work is preferred; however, for highly qualified candidates, a remote arrangement may be considered with up to 25% travel. • Architect end-to-end fuel systems including storage, transfer, venting, and pressurization for next-gen autonomous aircraft., • Lead cross-functional integration between propulsion, structures, avionics, and thermal teams to ensure optimal system performance., • Conduct system-level modeling and analysis to predict flow behavior, vapor suppression, slosh dynamics, and thermal effects., • Define performance requirements and verification strategies for high-reliability components and assemblies., • Lead design reviews, technical trade studies, and risk assessments for critical systems., • Oversee supplier selection, qualification, and acceptance testing for pumps, valves, tanks, and sensors., • Support and guide ground and flight test campaigns; perform root-cause analysis for system anomalies., • Mentor engineers, establish best practices, and develop processes for system integration and testing., • Contribute to long-term technology roadmaps, including hybrid-electric and alternative fuel system architectures., • B.S. or M.S. in Aerospace, Mechanical, or related engineering discipline., • 12–15+ years of experience in aircraft fuel systems, aerospace fluids, or propulsion integration., • Demonstrated expertise with fuel system design, analysis, and certification for manned or unmanned aircraft., • Deep understanding of fluid mechanics, thermodynamics, and CFD principles., • Proficiency with analysis and modeling tools (ANSYS Fluent, OpenFOAM, MATLAB/Simulink) and CAD software (NX, CATIA, or SolidWorks)., • Strong technical leadership and mentoring experience within multidisciplinary teams., • Familiarity with FAA and MIL-STD certification requirements and validation testing., • U.S. Citizenship required., • For remote candidates - ability to travel up to 25%., • Experience with UAV, fighter, or ISR platform development., • Proven success leading complex fuel system programs from concept through flight test., • Knowledge of advanced or low-observable fuel system technologies, vapor suppression, and hybrid-electric integration., • Active or previous security clearance.$209,197 - $313,795 a year#LI-JM2#LD Full-time regular employee offer package: Pay within range listed + Bonus + Benefits + Equity Temporary employee offer package: Pay within range listed above + temporary benefits package (applicable after 60 days of employment) Salary compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, licenses and certifications, and specific work location. All offers are contingent on a cleared background and possible reference check. Military fellows and part-time employees are not eligible for benefits. Please speak to your talent acquisition representative for more information. ### Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Ventus Executive Solutions is a dynamic small business at the forefront of innovation and consulting. We believe our employees’ success is integral to our mission, which is why we prioritize work-life balance, personal development, and fostering a sense of belonging. In addition to providing opportunities to thrive, we offer competitive salaries and comprehensive benefits to attract and retain top talent ready to make a meaningful impact. As part of the Ventus Solutions team, you’ll collaborate with government and industry leaders to develop constructive architecture models that inform decision-making at the highest levels of the Department of Defense. As an Employee Stock Ownership Plan (ESOP) we value curiosity, collaboration, and excellence, and we’re committed to supporting your professional growth through mentorship, career development, and a culture of continuous learning. Join a team where your ideas matter, your expertise drives impact, and your work advances the mission. Ventus Executive Solutions is seeking a skilled Advanced Reactor Systems Engineer to support cutting-edge advanced nuclear and mobile microreactor programs for an innovative program office. You will serve as a primary technical interface for vendor-proposed microreactor and advanced reactor designs, developing detailed familiarity with assigned systems and providing clear, actionable technical assessments and recommendations to government leadership. This position combines hands-on systems engineering, technical program management, design integration, requirements management, safety evaluation, technical risk assessment, and vendor oversight in support of first-of-a-kind (FOAK) reactor programs. You will be a self-starter who can take complex and ambiguous technical challenges from identification through resolution with limited supervision. You will coordinate across government organizations, external subject-matter experts, reactor design companies, and other stakeholders to resolve technical issues, manage interfaces, track program performance, and maintain program momentum. This position offers an opportunity to directly contribute to nationally significant advanced energy and defense initiatives. Join our innovative team and contribute to impactful national security initiatives. Work Location: Remote Travel: More than 25% Clearance: U.S. Citizenship required. Active Secret Clearance preferred. Pre-Requisites: • Must be able to support travel to vendor sites, government facilities, test locations, and program meetings as required., • Ability to work independently in a dynamic, high-visibility environment and manage multiple technical priorities with limited oversight. Required Experience: • Bachelor’s degree in engineering, engineering management, or a related technical field., • Significant professional experience in nuclear power systems, naval nuclear propulsion, advanced reactor programs, or similarly complex high-reliability engineered systems., • Demonstrated systems engineering and/or technical program management experience., • Experience with requirements management, system integration, technical risk assessment, design evaluation, or related engineering activities., • Experience interfacing with, overseeing, or managing technical vendors supporting complex engineered systems, capital equipment, or technology development programs., • Demonstrated ability to independently take ownership of complex, ambiguous assignments and drive them to completion with minimal supervision., • Ability to analyze complex technical information and develop clear, concise assessments, recommendations, briefings, and technical reports for senior government leadership., • Experience coordinating across government organizations, industry partners, subject-matter experts, and other stakeholders to resolve technical issues and manage system interfaces., • Ability to support program management activities including schedule tracking, risk management, technical performance monitoring, and issue resolution. Desired Experience: • Master’s degree in engineering, engineering management, nuclear engineering, or a related technical discipline., • Direct experience with microreactor or advanced reactor design, integration, testing, or safety analysis., • Naval Nuclear Propulsion Program experience, including Nuclear Power School, submarine nuclear operations, or land-based prototype/training reactor operations., • Prior SETA, government technical support, or technical advisory experience, particularly supporting SCO, DARPA, or other rapid-capability organizations., • Experience supporting transportation or accident scenario analyses, NEPA-related activities, or nuclear regulatory and safety frameworks., • Experience leading cross-functional technical teams, managing technical escalations, or implementing process and organizational improvements., • Experience with power production, power management, AC/DC electrical systems, industrial HVAC, semiconductor capital equipment, complex product support, or other high-reliability industrial systems., • Experience briefing senior government, military, or industry leadership on complex technical programs., • Strong written and verbal communication skills with the ability to translate complex engineering concepts into actionable recommendations. Ventus Executive Solutions provides our government and commercial clients with a range of professional and innovation services including: technology innovation acceleration, business consulting services, professional engineering and program oversight, and program and budget support. We support analysis and studies in a variety of areas including defense, energy and health care where we aid organizations in solving complex problems in new and innovative ways. We work with our clients to identify core issues and then put together a cost-effective world-class team to solve problems and enable our clients to create and seize opportunities. Ventus Executive Solutions is an Equal Opportunity Employer and uses _ in its hiring practices to achieve a lawful workforce. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, marital status, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, disability status or any other characteristic protected by applicable federal, state or local laws. To find out more about Ventus, visit our website: _

Senior Discovery IT System AdministratorEmployment Type: Full-Time, Executive-LevelDepartment: Legal CGS is seeking a dedicated Senior Discovery IT System Administrator to join a fast-paced and hard-working team to assist with any legal accounts. As a Senior Discovery IT System Administrator, you will play a key role in supporting various aspects of the company's portfolio. CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:The Contractor shall provide the following services to include but not limited to: - Contractor shall ensure the day-day availability of electronic discovery applications and related tools; - Contractor shall administer and monitor all installed systems and infrastructure, install, configure, test and maintain operating systems, application software and system management tools; - Contractor shall monitor and test application performance for potential bottlenecks, identify possible solutions, and work with vendors and developers to implement fixes; - Contractor shall maintain security, backup, and redundancy strategies; - Contractor shall assist technical architecture design discussions; - Contractor shall liaise with vendors on behalf of OGC to address product issues; - Contractor shall develop and provide training for the end-users; - Contractor shall provide general support, subject matter expertise and advice on the use of electronic discovery tools and applications; - Contractor shall reverse engineer and document the as-is architecture of existing legacy applications or systems; - Contractor shall analyze capabilities, interview and collect business requirements and translate it into technical requirements; - Contractor shall support the discovery application integration/migration activities; - Contractor shall contribute to the Knowledge Management databases by creating and improving technical knowledge articles to assist in future resolution of issues; - Contractor shall have legal technology experience and knowledge of the EDRM; - Contractor shall assist in the implementation of e-discovery tools ( i.e. Relativity, Veritas eDP, or other review platform applications hosted in the cloud environment; - Contractor shall have the skills, knowledge and abilities to support backend infrastructure, data migrations, application installation, management and configuration; - Contractor shall have the ability to install, operate, and manage Microsoft server 2019/2022 and Microsoft SQL Server 2019/2022; - Contractor shall have ability to operate, and manage cloud technologies to include Microsoft Azure, Amazon AWS, VMware, Azure servers, Azure Functions, and Azure API Gateways and/or AWS EC2 servers, AWS Lambda and AWS API Gateways; - Contractor shall have ability to operate and manage relational databases, MySQL and/or SQL Server 2012 or higher. Our Commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we’ve been growing our government-contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work.Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package.- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation!Explore additional job opportunities with CGS on our Job Board:For more information about CGS please visit: or contact:Phone: +1 (888) 680-5916Email: _ #CJ $160,579.80 - $231,948.60 a yearWe may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

About Us: PMAT is an innovative small business founded with a passion for developing forward-leaning solutions from exceptional people that increase the mission's capability. We focus on designing and building impactful digital solutions that utilize modern cloud, data, and software concepts. Our passion is working on complex and progressive challenges such as edge platform computing, containerizing legacy platforms, distributed data platforms, or heterogeneous data analysis. We recruit, retain, and foster a team motivated to pursue passions, investigate new ways of doing things, and embody an innovative and entrepreneurial spirit. We believe in being curious about every element of a problem and experiment relentlessly. We foster continuous learning in an environment that encourages positive collaboration and expands our capabilities. We tap into collective intelligence, acknowledging that the most brilliant people may not be in the room. Above all else, we believe that delivering and demonstrating is more potent than a sheet of paper. We are passionate about mission-centric design and delivering effective capabilities to and for the warfighter. Whether you’re an experienced engineer or just beginning your career, you’ll work alongside experts who are committed to solving mission-critical problems. If you’re passionate about using your skills to make a real difference, apply today and become part of a team that’s shaping the future of defense technology! About the Role: The Senior Systems Engineer is a full-time, integral role responsible for overseeing multiple subsystems and projects while contributing to high-level system design. This position leads impactful initiatives by assessing and resolving system-wide challenges, developing designs, and maintaining alignment across platforms. The role requires close collaboration with technical leads, project managers, and external government and private sector partners to address risk and scalability concerns while sustaining legacy combat readiness and optimizing complex systems for world-class integrated weapon systems at land and sea. The successful candidate is delivery-focused, demonstrates leadership abilities and is passionate about designing and developing rapid prototypes through modern approaches and methodologies producing world-class mission architecture supporting the successful development, modernization, and maintenance of systems critical to our warfighters and protecting national security. This position will work collaboratively with other System Engineers, Team Leads, and Program Management to achieve PMAT goals. This is a unique opportunity to drive high-level designs, mentor and develop a team. Responsibilities: The Senior Systems Engineer will oversee the complete system lifecycle—from initial concept through to deployment—while defining high-level architecture and establishing robust systems interfaces. This role is responsible for ensuring that all systems meet regulatory standards and stakeholder requirements. In addition, the engineer will mentor junior team members to drive technical excellence and work closely with leadership to ensure that systems solutions are fully aligned with business objectives. • Oversee configuration management and system lifecycle, from concept to deployment, • Develop and design complex network architectures and system infrastructures, • Define and implement robust interface standards for systems integration, • Oversee the installation, configuration, and ongoing maintenance of computer systems and networks on Naval ships and land based facilities, • Ensure optimum functionality and proactive monitoring of system performance, • Diagnose and resolve system inefficiencies, technical issues, and downtime incidents, • Implement timely solutions to ensure continuous system availability and performance, • Maintain detailed documentation of system configurations, network diagrams, and operational procedures, • Collaborate with managers, technical leads, and external partners to determine system needs and align architecture with business objectives, • Communicate technical information effectively to non-technical stakeholders, • Mentor junior engineers and guide team development to drive technical excellence, • Ensure all systems are compliant with regulatory requirements and industry standards, • Implement and maintain cybersecurity measures to protect the organization’s IT assets Required Skills & Experience: • Minimum 10 years of systems engineering experience, with at least 5 years supporting DoD or Navy acquisition programs (e.g., NAVSEA, NAVWAR, PEO C4I, PEO Digital)., • Strong knowledge of systems engineering principles (V-model, Agile, etc.), • Familiarity with Navy Modernization Process Management and Operations Manual for ship alteration, • Knowledge of system design tools and methods. (CAMEO, MATLAB, SysML, or requirements management tools), • Proficient knowledge of industry-relevant standards such as the INCOSE SE Handbook, • Demonstrated ability to develop strategic plans and effectively manage risks, • Proven ability to lead and deliver large, complex projects successfully, • Demonstrated aptitude for inspiring, guiding, and aligning teams with strategic objectives, • Demonstrated ability to lead large-scale, cross-functional engineering projects while mentoring junior engineers and fostering technical excellence, • Ability to stay up to date with new technologies in the evolving industry to ensure proactive innovation and competitive systems, • Proven ability to effectively communicate technical information and brief senior government representatives, program leadership, and review boards., • Ability to speak publicly and brief senior government officials Preferred Skills & Experience: • Advanced degree from an accredited institution., • Demonstrated experience developing System Requirements Specifications (SRS), Interface Control Documents (ICDs), and test documentation (Test Plans, Procedures, Reports) in accordance with DoD systems engineering standards (e.g., MIL-STD-961, MIL-STD-3022, or program-specific SE processes)., • Demonstrated experience supporting Naval intelligence systems and Over-the-Horizon Targeting (OTH-T) architectures, including familiarity with tactical data links, sensor-to-shooter integration, and intelligence data flows supporting fleet-level situational awareness and targeting decision cycles., • Expertise in defining and implementing complex system architectures and interfaces that meet both current and future needs, • Strong background in developing strategic plans, assessing project risks, and executing effective risk mitigation strategies, • Experience collaborating and negotiating effectively with both technical teams and non-technical stakeholders, • Experience following a formal procedure for coordinating system integration activities among multiple teams, ensuring complete coverage of all interfaces, • Experience with some of the following, or similar:, • System Design and Architecture, • Requirements Analysis and Management, • System Integration and Testing, • Risk Assessment and Mitigation, • Documentation and Reporting, • Configuration Management Education and Certification Requirements: • Bachelor’s degree from an accredited institution in Computer Science, Mathematics, Engineering or a related field, • INCOSE Certified Systems Engineering Professional (CSEP) or similar, preferred Clearance: • US Citizenship required, • No dual citizenship, • Active TS required, • Active TS/SCI highly preferred Location: • Remote, • Candidates should reside in the DC, Maryland or Northern Virginia area., • Meetings will be conducted in Washington DC and the Navy Yard. Work Environment: The work environment is primarily remote within Northern Virginia /Maryland area. In some cases, work in a government facility may be required within the Fairfax, Quantico, D.C, Baltimore area. Travel will be required for customer engagement, team coordination, and potentially for business development. PMAT is an equal-opportunity employer. We believe in hiring a diverse workforce and sustaining an inclusive, people-first culture. We are committed to non-discrimination on any protected basis, such as disability and veteran status, or any other basis covered under applicable law. #CJ

ARES has an exciting opportunity for a Systems Engineer supporting the Engineering, Professional, and Administrative Support Services (EPASS) Contract at Peterson SFB with modernization activities. In this role, you will support the Government program office by providing independent technical evaluation of contractor-led software modernization and development activities, including software architecture, algorithm performance, open systems architecture, communications, and data strategies. This is a full-time remote position. Travel may be required to CONUS and OCUNS locations (approx. 10%). Duties include: • Provide engineering oversight across the entire technical baseline. Review and assess the prime contractor's systems engineering plans, processes, and artifacts to ensure they align with Government objectives and best practices., • Review and provide technical recommendations on the full set of contractor-developed system and subsystem requirements, ensuring they are clear, verifiable, and properly allocated and traced., • Oversee and assess contractor-led engineering trade studies, providing the Government with independent analysis of alternatives to ensure decisions balance performance, cost, schedule, and risk across the portfolio., • Manage and provide oversight of the requirements verification process. This includes reviewing and assessing the contractor’s Verification and Validation (V&V) plans, Test and Evaluation Master Plan (TEMP), and the Requirements Verification Matrix (RVM)., • Manage the Government's oversight of the deficiency reporting process. Track and report on the status of all identified system deficiencies, ensuring they are properly documented, prioritized, and driven to resolution by the contractor., • Evaluate the overall system architecture, including external and internal interfaces, to ensure it is robust, scalable, and compliant with Modular Open System Architecture (MOSA) principles., • Monitor system integration activities, identify potential cross-domain (hardware, software, cybersecurity) integration risks, and provide the Government with risk mitigation strategies., • Provide continuous technical support and recommendations to the Government team throughout all phases of the acquisition lifecycle, including major technical reviews (e.g., SRR, PDR, CDR), configuration management, and system-level testing., • Assist with Configuration Control Boards, Engineering Trades, Requirements Verification, Requirements Mapping, and all aspects of baseline management at all levels of the program to include the portfolio/system-of-systems level Minimum Required Qualifications Clearance: Ability to obtain or a current Secret Clearance with the ability to obtain Top Secret Education: High School Diploma Years of Experience: 15 years of directly related experience; to include 8 years of DoD experience; OR • Bachelor's Degree in a related field and twelve (12) years of experience in the respective technical/professional discipline; to include five (5) years of DoD experience; OR, • Master's or Doctorate Degree in a related field and ten (10) years of experience in the respective technical/professional discipline; to include five (5) years of DoD experience Required Technical Skills: • 15+ years of experience in systems engineering on complex defense or aerospace programs., • Demonstrated leadership experience on an ACAT I/II Major Defense Acquisition Program (MDAP), with direct responsibility for system-of-systems integration., • Demonstrated experience on a Major Defense Acquisition Program (MDAP) or other large-scale (ACAT I/II) programs., • Expertise in requirements management, verification and validation, and Test & Evaluation (T&E) in a DoD environment., • Proven experience developing and implementing a Modular Open System Architecture (MOSA) strategy on a large program., • Ability to manage complex technical trades and interface challenges in a multi-contractor environment. ARES Benefits: ARES offers a competitive compensation and benefit package. Full time employees may participate in: • Medical Insurance, • Dental Insurance, • Vision Insurance, • HSA/FSA Accounts, • Life & Disability Insurance, • Critical Illness & Accident Insurance, • ESOP, • 401(k) Plan, • Paid Time Off & Holidays ARES is an equal opportunity employer and complies with E-Verify. We believe in hiring a diverse workforce and fostering an inclusive culture. We are committed to non-discrimination on any protected basis, such as disability and veteran status, or any other basis covered under applicable law. ARES shall abide by the requirements of 41 CFR 601.4(a), 60-300.5(a) and 60-741.5(a). Our stated salary range represents a general guideline. However, ARES considers a number of factors when determining salary offers such as current market conditions, the scope and responsibilities of the position and the candidate's experience, education, and skills. *Applications are going to be accepted on an ongoing basis until the position has been filled. position has been filled.

Noodle is higher education’s leading strategy, services, and technology partner. We develop infrastructure, provide life-changing learning experiences, and grow the awareness of and the enrollment in some of the best academic institutions in the world. Our vision is “to empower universities to change the world.” We achieve this vision by offering our university partners various products and services that help them be more resilient, responsive, efficient, and interconnected. We’re looking for a Prompt Systems Engineer to sit at the intersection of AI capability and educational effectiveness. You will own the design, testing, and continuous improvement of the prompts and system instructions that power Noodle’s AI agents across enrollment, learning, and student support use cases. This is a hands-on, high-impact role. You’ll work directly with product managers, learning designers, university stakeholders, and engineers to translate operational and pedagogical goals and business requirements into agent behavior — and you’ll build the evaluation frameworks to prove that behavior is working. Prompt Design & Engineering • Write, iterate, and maintain system prompts and instruction sets for Noodle’s AI agents focused on students enrollment, learning, and retention, • Translate complex educational and operational requirements into clear, reliable agent behavior — including persona definition, tone, scope constraints, fallback handling, and multi-turn conversation logic, • Design prompt architectures for multi-step and chained agent workflows, including RAG-augmented agents that draw from program-specific knowledge bases, • Collaborate with the engineering team to configure and deploy agents through Noodle’s AI orchestration platform, including primary prompts, secondary context, knowledge base attachments, and embed definitions, • Create the learner experiences defined by “three-way” chat between the learner, a campus or Noodle support staff member, and that staff member’s AI assistant Evaluation & Quality • Build and maintain evaluation frameworks to measure agent accuracy, tone, hallucination rate, task completion, and alignment with rubric-based learning objectives, • Use Langfuse (Noodle’s LLM observability platform) to monitor prompt performance in production, identify regressions, and prioritize prompt improvements, • Design red-teaming and adversarial testing protocols to surface edge cases and failure modes before agents reach students, • Establish prompt versioning practices and maintain a library of tested, reusable prompt components Collaboration & Enablement • Partner with Noodle teammates and university stakeholders to design, build, and test agents — translating learning objectives, operational flows, rubric assessments, and more into prompt-level agent instructions, • Work with enrollment and student success teams to tune companion agents for specific programs and university partner contexts, • Contribute prompt engineering guidelines and best practices documentation for internal teams who configure their own agents on Noodle’s AI orchestration platform, • Stay current with model capability changes across OpenAI, Anthropic, and other providers integrated into Noodle’s stack, and proactively surface opportunities or risks, • Perform other duties as assigned, • 2+ years of experience designing and iterating on prompts for LLM-powered applications in a production environment, • Deep familiarity with prompt patterns: few-shot examples, chain-of-thought, system vs. user roles, output formatting constraints, tool-use prompting, and RAG integration, • Strong written communication — you can write clearly, precisely, and persuasively, because that’s the core of the job, • Experience building and running prompt evaluations: defining metrics, writing test cases, and interpreting results to make improvement decisions, • Comfort working across disciplines — you can hold a conversation with an engineer about context windows and with a faculty member about Bloom’s Taxonomy, • Experience with LLM observability tools (Langfuse, Weights & Biases, or similar), • Familiarity with LTI (Learning Tools Interoperability) and how AI tools plug into LMS platforms like Moodle, Canvas, or Instructure, • Experience with voice agents or multimodal prompting, • Comfort reading and writing basic code (JavaScript, Python) to support prompt automation and testing pipelines, • Knowledge of OpenAI, Anthropic, or other model provider APIs, • Ability to thrive in ambiguity and iterate quickly based on user feedback, • Ability to work effectively in dynamic, rapidly changing, team-based environment, • Work from our beautiful NYC office OR the comfort of your home office!, • Computer and charger on us!, • 401(k) with company match, plus equity opportunities, • Medical, dental, and vision insurance for you and your family (including mental health benefits like Headspace and Talkspace), • Employer-paid life and disability insurance, • Optional voluntary coverage, including supplemental life, accident, critical illness, and hospital insurance, • Health Savings Account (HSA), Flexible Spending Accounts (FSA), and commuter benefits, • Pre-tax benefit options that help you save on eligible healthcare, dependent care, and commuting expenses, • Employee Assistance Program (EAP), • Paid parental leave, • Wellness initiatives and resources, • Free subscription to the Calm app, • Employee discount program, • 4 weeks of paid vacation + 10 paid holidays + paid sick leave, • Monthly mobile connectivity stipend, • Annual education stipend for lifelong learning, • Growth opportunities - we pride ourselves on creating environments where employees can be themselves and grow within and around the company $100,000 - $120,000 a yearEligibility Requirements:This position is based in the United States, and applicants must be legally authorized to live and work in the United States. Employees are required to reside within the United States for the duration of their employment. At Noodle, we hire people who will help us change the future of online education. Even if you don't think you check off every bullet point on this list, we still encourage you to apply! We value both current experience and future potential. Noodle is committed to creating a welcoming and inclusive workplace for everyone. We value and celebrate our differences because those differences are what make our team shine. We hire great people from different backgrounds, not just because it's the right thing to do, but because it makes us stronger as a whole. Women, people of color, LGBTQIA2S+ individuals, and members of other underrepresented groups are strongly encouraged to apply. Noodle is an equal opportunity employer and does not discriminate against candidates on the basis of race, ethnicity, religion, sex, gender, sexual orientation, gender identity, disability status, or veteran status. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Position Summary The Field Systems Engineer (FSE) is responsible for attending to service needs of bioMerieux customers within their assigned geographic territory, as well as nationally, on an as-needed basis, utilizing appropriate tools and test equipment. The FSE is a self-starter, with the ability to deliver a best-in-class customer experience, while working remotely without direct supervision and able to conduct overnight travel on short-notice. Position Duties • Customer Service & Technical Execution: Promptly respond to customer needs and perform installations, maintenance, upgrades, and repairs using electronic and computer skills to ensure instruments meet specifications., • Relationship Building & Sales Support: Build trust with customers, promote service agreements, and identify sales opportunities for cross-functional teams., • Collaboration & Revenue Generation: Foster teamwork across service and support teams while driving field service revenue through billable offerings like preventive maintenance and equipment moves., • Training Travel: Attend 6–9 weeks of product training at Durham, NC or St. Louis, MO offices within the first year; future trainings occur as needed., • Customer Visit Travel: Travel includes both scheduled and unscheduled visits, with increased overnight stays for wide territories and occasional national travel., • On-Call Support: Participate in weekend/holiday on-call rotation (~every 5 weeks), requiring local phone availability and potential national travel for instrument support., • Documentation & Compliance: Timely and accurate completion of service work orders, QA checklists, and internal training requirements., • Scheduling & Reporting: Maintain an up-to-date calendar of availability and submit travel expense reports regularly to avoid penalties., • Fleet Management: Follow all company policies related to the use and upkeep of the assigned fleet vehicle., • Asset & Inventory Management: Maintain spare parts inventory, company-issued vehicle, and all assigned equipment (e.g., laptop, tools, test devices) in good condition and per policy., • Professional Development & Collaboration: Continuously improve technical and interpersonal skills, meet annual priorities, and collaborate with sales and applications teams to enhance customer experience., • Strategic & Promotional Support: Represent bioMerieux professionally, support trade shows as needed, and provide feedback to Sales, Marketing, and Customer Service to help expand service capabilities., • Perform all work in compliance with company quality procedures and standards., • Perform other duties as assigned. Qualifications Required Education, Training and Experience • Bachelor degree in Engineering, Electronic Technology, Computer Science, Biomedical or other related discipline., • 2+ years of professional related experience in troubleshooting and/or repair of complex electro-mechanical, electronic, computer, electrical systems in commercial, industrial, or military setting required., • Education Substitution: In lieu of a Bachelor's degree, 6+ years of relevant experience, defined above, is required., • Must have and maintain a valid driver’s license in state of residence. Preferred Education, Training and Experience • Experience in troubleshooting and/or repair of biomedical, vacuum systems, host/remote communications and network systems, or similar systems and in a clinical laboratory setting preferred., • Experience operating independently including managing schedules, customer expectations, and communications both internally and externally; prioritizing tasks; and resolving technical issues without direct oversight preferred., • Experience in a field service role preferred., • Experience in the principles and practices of laboratory operations preferred. Knowledge, Skills, and Abilities • Consistently upholds and reflects the core ethical principles and values that bioMérieux promotes., • Functional skills including critical thinking, adaptability, time management, communication, problem-solving and digital literacy., • Detail orientation to complete tasks without errors and produce high-quality work., • Thriving in a fast-paced environment by managing tasks, multitasking, and adapting quickly to maintain productivity., • Organizing work and resources efficiently to ensure smooth operations, • Troubleshooting issues to identify and resolve problems efficiently, • Demonstrates assertiveness and confidence in the face of a challenge, • Effective verbal, written and presentation skills., • Ability to work cross-functionally allowing for better collaboration and communication when working across teams to achieve shared objectives, • Intermediate skill in MS Office tools to include but not limited to Outlook, Teams, Word, and Excel Working Conditions and Travel • Physical requirements include: remaining in a stationary position for long periods, stair/ladder climbing, wearing PPE, operating heavy machinery, and lifting/moving up to 50 lbs., • Travel requirement: Typical weekday travel is defined as daily customer visits not requiring overnight travel but expect daily driving of 50% or more. Weekend and Holiday rotational coverage is scheduled with the expectation of additional driving or flying within and/or outside of the standard assigned service region. Standard field service operations for customer support consists of approximately 15% of annual On-call with the expectation of overnight travel when qualified on products., • Domestic travel: required up to 90% of the time, • Typical Regional travel (non-overnight): 50% Monday through Friday, • Weekend/Holiday rotational travel: up to 15% of the time The estimated wage range for this field based role in Missouri is between $32.90 and $45.00 per hour. This role is eligible to receive a variable annual bonus based on company, team, and individual performance per bioMerieux’s bonus program. This range may differ from ranges offered for similar positions elsewhere in the country given differences in cost of living. Actual compensation within this range is determined based on the successful candidate’s experience and will be presented in writing at the time of the offer. In addition, bioMérieux offers a competitive Total Rewards package that may include: • A choice of medical (including prescription), dental, and vision plans providing nationwide coverage and telemedicine options, • Company-Provided Life and Accidental Death Insurance, • Short and Long-Term Disability Insurance, • Retirement Plan including a generous non-discretionary employer contribution and employer match., • Adoption Assistance, • Wellness Programs, • Employee Assistance Program, • Commuter Benefits, • Various voluntary benefit offerings, • Discount programs, • Parental leaves #LI-DS1 Please be aware that recruitment related scams are on the rise. Fraudulent job postings are being placed on other websites, and individuals posing as bioMérieux Talent Acquisition team members are reaching out via email or text message in an attempt to collect your personal and confidential information. In some cases, these scammers are also conducting bogus interviews prior to extending fraudulent offers of employment. Beware of individuals reaching out using general phone numbers and non-bioMerieux email domains (i.e. Hotmail.com, Gmail.com, Yahoo.com, etc.). If you are concerned that an interview experience or offer of employment might be a scam, please make sure you are searching for the posting on our careers site or contact us at BioMérieux Inc. and its affiliates are Equal Opportunity/Affirmative Action Employers. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Please be advised that the receipt of satisfactory responses to reference requests and the provision of satisfactory proof of an applicant’s identity and legal authorization to work in the United States are required of all new hires. Any misrepresentation, falsification, or material omission may result in the failure to receive an offer, the retraction of an offer, or if already hired, dismissal. If you are a qualified individual with a disability, you may request a reasonable accommodation in BioMérieux’s or its affiliates’ application process by contacting us via telephone at (385) 770-1132, by email at _, or by dialing 711 for access to Telecommunications Relay Services (TRS).

Applied Research Associates, Inc. (ARA), Southwest Division (SWD) is looking for an experienced Senior Systems Engineer to join our Concept Development Group (CDG), located in Albuquerque, New Mexico. CDG boasts a multidisciplinary team of engineers performing research, development, and analysis and test for developmental weapon programs. As a Senior Systems Engineer you will provide technical support for Department of War programs, ensuring weapons and munitions systems are effectively designed, integrated, tested, and fielded. This role works closely with program managers and prime contractors to evaluate technical solutions, manage risk, and support milestone decisions. The position blends in‑office program execution with travel to support test and integration activities. An ideal candidate is a technically strong, mission-focused engineer who can translate complex weapons system details into clear, actionable guidance for program leadership while collaborating effectively across government and industry teams. Job Location: Remote work may be available for the right candidate. What you’ll do as a Senior Systems Engineer • Provide subject matter expertise in weapons and munitions Systems Engineering to support a team, working day-to-day with Program Managers, Lead Engineers, and functional leads., • Support requirements development, trade studies, system architecture, and interface definition for weapons and munitions across the system life cycle (development, integration, test, fielding, and sustainment)., • Review and assess contractor technical data, designs, analyses, and test plans to ensure compliance with system requirements, safety standards, and government intent., • Engage with prime contractors and government stakeholders during technical interchange meetings, design reviews (SRR, PDR, CDR), and working groups to resolve technical issues and risks., • Support weapons and munitions integration activities, including platform interfaces, stores compatibility, employment concepts, and certification considerations., • Participate in developmental and operational test planning and execution, including travel to test sites, range activities, and post‑test analysis and reporting., • Identify technical risks, assess impacts to cost/schedule/performance, and provide actionable recommendations to the government team to inform program decisions. Senior Systems Engineer Requirements • Bachelor’s degree in Engineering (Aerospace, Mechanical, Electrical, Systems, or related discipline)., • 7-9 Years Experience supporting DoD or Army or Air Force weapons, munitions, or stores integration programs., • Working knowledge of Systems Engineering principles, requirements management, risk management, and technical reviews., • Ability to analyze contractor technical products and communicate findings clearly to government stakeholders., • Willingness and ability to travel in support of test and program activities., • Active Secret clearance, with ability to obtain and maintain a Top-Secret clearance., • Ability to perform requirements identification, analysis, documentation, and tracking, • Ability to analyze customer needs and turn them into system requirements, • Ability to work with customers in a test environment, • Ability to develop improved methods to increase program efficiency, • Team player with a proactive attitude, • Strong oral and written communications skills Preferred Qualifications • Direct experience supporting DOW programs, • Familiarity with weapons certification, airworthiness, safety, and/or MIL-STD compliance processes., • Experience with developmental and operational test planning and execution., • Knowledge of DoD acquisition processes, life-cycle management, and risk management practices., • Previous experience working with major defense prime contractors on weapons or munitions programs., • Active Top-Secret clearance or experience working in SCI/SAP environments., • Demonstrated ability to independently execute technical tasks while effectively supporting Government-led teams in a collaborative role., • Ability to use statistical analysis methods and tools, • Knowledge of Model Based Systems Engineering (MBSE) tools and practices Compensation & Benefits: Pay Range: From $109,200 to $182,020 USD per year based on years of experience, degree and any special skills and knowledge that they may bring to the position. ARA offers competitive benefits that address our employees’ needs now and in the future. Learn more about each of our benefits at _ Company & Division Information Applied Research Associates, Inc. is an employee-owned international research and engineering company recognized for providing technically superior solutions to complex and challenging problems in the physical sciences. The company, founded in Albuquerque, NM, in 1979, currently employs over 2,200 employee-owners and continues to grow. ARA offices throughout the United States and Canada provide a broad range of technical expertise in defense technologies, civil technologies, computer software and simulation, systems analysis, environmental technologies, and testing and measurement. The corporation also provides sophisticated technical products for environmental site characterization, pavement analysis, and robotics. At ARA, employees are our greatest assets. The corporation realizes that employee ownership spawns greater creativity and initiative along with higher performance and customer satisfaction levels. ARA gives its employees the tools, training, and opportunities to take more active roles as owners. The culture is challenging; innovation and experimentation are the norm. Employees contributions not only add to the company’s success, but also their own through the Employee Stock Ownership Plan (ESOP). The motto, “Engineering and Science for Fun and Profit” sums up the ARA experience. For additional information and an opportunity to join this unique workplace, please apply at careers.ara.com.

“They made it easier for me to live, breathe, eat, and stay clean. Without them, I’d be waiting somewhere, waiting for someone to give me a chance to live...” - Client from Telecare  What You Will Do to Change Lives  The Senior Systems Engineer – Hybrid Cloud leads the design, development and operation of Telecare’s hybrid cloud infrastructure with a focus on cost-effectiveness, availability, performance, security and scalability. They provide support for On-premise private cloud, public cloud IaaS, PaaS, SaaS, database engineering, storage, and site reliability engineering, as well as makes recommendations to leverage public cloud efficiency while maintaining secure data on-premises. Shifts Available:  Full-Time | AM | Shifts: 8:00 AM - 5:30 PM | Days: Monday - Friday Expected starting wage range is $116,481.18 - $150,000.00. Telecare applies geographic differentials to its pay ranges.  The pay range assigned to this role will be based on the geographic location from which the role is performed.  Starting pay is commensurate with relevant experience above the minimum requirements. What You Bring to the Table (Must Have)  • Bachelor’s degree in computer science, engineering, information technology, related field, or equivalent work experience., • Four or more years of experience and deep working knowledge of Microsoft Azure that includes functional practical knowledge in automating Microsoft Azure reliability solutions such as HA/DR configuration, multi-AZ and multi-region deployment, auto scaling, etc., • Experience in integrating Azure cloud with third party software, other SaaS services or on-premise applications., • Minimum of 7 years of proven knowledge working with server and storage hardware, software, including Citrix, VMware, Dell Server and Storage Systems, Windows, Linux, etc., • Extensive experience with Active Directory and group policy., • Experience with relational database and related technologies (e.g. MS SQL Server, MySQL), • Experience with VMware vSphere virtualization technologies using vCenter preferred., • Experience with networking and security concepts within a hybrid cloud infrastructure environment., • Exposure to PowerShell and/or bash scripting preferred., • Ability to work within a team and provide leadership in the design, deployment, and support of infrastructure systems., • Must demonstrate good understanding of ITIL, including service management, capacity management, change management and documentation., • Azure Cloud Certification preferred, • Must be at least 18 years of age., • All opportunities at Telecare are contingent upon successful completion and receipt of acceptable results of the applicable post-offer physical examination, 2-step PPD test for tuberculosis, acceptable criminal background clearances, excluded party sanctions, and degree or license verification. If the position requires driving, a valid driver’s license, a motor vehicle clearance, and proof of auto insurance is required at time of employment and must be maintained throughout employment. Additional regulatory, contractual, or local requirements may apply. What’s In It For You*  • Paid Time Off: Eligible employees (20+ hours/week) earn PTO each pay period for vacation and personal needs, with pro-rated accrual for part-time schedules and annual carryover up to set caps., • Nine Paid Holidays, • Free CEUs, free Supervision for BBS Associate License, coaching, and mentorship  , • Online University Tuition Discount and Company Scholarships  , • Medical, Vision, Dental Insurance, 401K, Employee Stock Ownership Plan , • For more information visit:  _  Join Our Compassionate Team  Telecare's mission is to deliver excellent and effective behavioral health services that engage individuals in recovering their health, hopes, and dreams. Telecare continues to advance cultural diversity, humility, equity, and inclusion at all levels of our organization by hiring mental health peers, BIPOC, LGBTQIA+, veterans, and all belief systems.  EOE AA M/F/V/Disability  *May vary by location and position type  Full Job Description will be provided if selected for an interview.  If job posting references any sign-on bonus internal applicants and applicants employed with Telecare in the previous 12 months would not be eligible.

AGE Solutions is a premier technology and professional services company, providing in-depth consulting, advanced technology solutions, and essential services throughout the U.S. government, defense, and intelligence sectors. Prioritizing innovation and client-focused solutions, we assist major agencies in addressing intricate issues and ensuring a more secure future. We are seeking an experienced Sr. Network/Systems Engineer to support the design, implementation, optimization, and troubleshooting of enterprise networking and hybrid infrastructure environments. Responsibilities Include: • Design, engineer, integrate, implement, test, maintain, review, and administer infrastructure, hardware, and software to manage network security and risk posture in alignment with the organization's security strategy., • Apply systems engineering principles throughout the systems engineering lifecycle to translate cyber objectives, technology trends, and environmental conditions into effective engineering solutions., • Configure cyber systems to meet user requirements, ensuring that they are properly aligned with security policies and standards., • Apply leading-edge principles, theories, and concepts to address complex problems and provide innovative solutions in the cybersecurity domain., • Possess and apply a comprehensive knowledge across key tasks and assignments, demonstrating expertise in multiple areas of cybersecurity and systems engineering., • Plan and lead major technology assignments, evaluating performance results and recommending significant changes to ensure project success and growth., • Serve as a technical expert across multiple project assignments, operating with substantial autonomy and providing mentorship or supervision to junior employees in technical competencies., • Stay up to date on market and technology trends to identify and implement best-of-breed solutions for clients. Required Qualifications: • Must have at least 8 years of relevant experience in network and systems engineering roles, demonstrating a deep understanding of networking technologies, security solutions, and system administration., • Bachelor's Degree in a related field., • Must possess and maintain a current DoD Top Secret Clearance., • Must meet DoD 8570 IAT Level II certification requirements and maintain at least one of the specified certifications (CCNA-Security, CySA+, GICSP, GSEC, Security+ CE, CND, or SSCP). Required Experience, Skills, and Knowledge: • Familiarity with and understanding of Zero Trust Architecture principles and implementation strategies. This includes implementing least privilege access controls, continuous authentication, and micro-segmentation to enhance network security. Experience with Versa Networks is a plus, demonstrating familiarity with specific network technologies and solutions., • Strong familiarity with network security solutions, including intrusion detection systems (IDS), firewall configurations, and other security measures., • Proficiency in routing and switching technologies, particularly with Juniper and Cisco hardware., • Experience in designing, implementing, and troubleshooting wireless networks., • A solid grasp of networking fundamentals, including network functions, routing protocols, configuration mappings, and network drawings., • Experience with various networking protocols such as BGP, static routing, IP multicast, and VPN technologies., • Experience with MS Windows operating systems and Active Directory for system administration tasks., • Proficiency in Microsoft Office products (Word, Excel, Visio) for documentation and presentation purposes., • Excellent written and verbal communication skills are essential for presenting findings to Engineering Review Boards and effectively collaborating with team members., • Experience working in secure facilities, understanding high-side protocols, procedures, and security requirements., • This is a remote role within the United States, requiring travel to client sites, both within the continental United States (CONUS) and outside the continental United States (OCONUS), as needed (approximately 15-25% travel)., • Demonstrated ability to take initiative and lead projects independently., • Strong attention to detail for information gathering, analysis, troubleshooting, and presentation purposes., • Ability to interact effectively with team members while also being capable of working independently when necessary. The projected salary range for this position is $150,000+ annually. Final compensation will be determined based on factors including years of relevant experience, active security clearance level, certifications, technical skillset, contract requirements, and overall qualifications. At AGE Solutions, we reward performance, invest in growth, and share success. Our benefits support the whole person, professionally, financially, and personally. • 26 Days Paid Leave: Includes vacation, sick, personal time, and holidays. You choose how to use it., • Performance Bonuses: Performance bonuses are awarded based on individual contributions and company-wide results, aligning recognition with impact., • 401(k) with Match: We match 3% of your contributions with immediate vesting., • Financial Protection: Company-paid life insurance up to $300K and options for additional coverage for you and your dependents., • Health Benefits: Multiple medical plans, dental, vision, FSA and HSA options to fit your needs., • Parental Leave: 15 days of fully paid leave for new parents, because family matters., • Military Differential Pay: We bridge the gap for employees on active duty, so they don’t take a financial hit while serving., • Professional Growth: Paid training and certifications, tuition reimbursement, and the tools and tech to get the job done right., • Shared Success: In the event of a company sale, our CEO has committed to returning 80% of net proceeds to employees. This ensures our team shares in the long term value they help create. At AGE, you’ll do work that matters, supported by a company that delivers for its people.

Join Our Growing Team CSA provides the ideal place for you to develop or start your career in a fast-paced, diverse environment. At CSA Group, one of our guiding principles is to treat people with respect, and we appreciate diversity in their backgrounds, experiences and opinions. If you think you have what it takes to be an industry leader, send us your resume. Our Success For more than 65 years, CSA Group has contributed to developing stronger, more resilient facility and infrastructure solutions. Our experience brings plenty of opportunities for you to expand your skill set, challenge yourself, and make an impact. Social Commitments One of CSA Group’s most important Guiding Principles is our commitment to contribute to the industries we serve and the communities we live in. This translates into active involvement in a variety of activities and organizations, which provide many opportunities for education and growth for our employees. Responsibilities Priorities can often change in a fast-paced environment like ours, so this role includes, but is not limited to, the following responsibilities: • Support major projects involving the planning, design, and startup of water and wastewater treatment systems with a focus on process, pump stations, large diameter pipelines, biosolids, and odor control systems., • Lead project teams to complete projects to exceed client expectations for approach, scope, budget and schedule., • Demonstrate technical excellence in the performance of project assignments including planning, design and preparation of bid documents, project management, regulatory coordination, and construction services., • Assemble and present written recommendations on technical matters and prepare reports., • Inspect, test and evaluate collection, conveyance, distribution, and treatment systems and processes., • Manage multiple technical assignments while participating in or leading project teams to complete projects to exceed client expectations for approach, scope, budget and schedule., • Develop and maintain client relationships, understanding their current and future needs to ensure expectations are met., • Participate in business development pursuits, identifying opportunities and preparing proposals to meet the office's growth goals. Requirements Essential Skills and Experience: • Bachelor’s degree in Civil, Environmental, Chemical, or Mechanical Engineering, • 6 or more years of experience in water and wastewater consulting field, • Excellent oral and written communication skills, • Registration as Professional Engineer preferred, • Prior experience in water and wastewater pipeline, pump station, and treatment facility design, rehabilitation, and construction, • Prior experience in process equipment selection, design and startup for pump stations, treatment plants and biosolids processing facilities., • Ability to prepare reports; evaluate pipelines, pump stations and/or treatment plants; and prepare design documents, • Familiar with environmental rules and regulations in the water and wastewater field, • Proficiency with AutoCAD and computer modeling for water systems, open channel flow, and sanitary/storm water systems and other computer applications, • Curiosity and interest in continuous learning in AI and comfort experimenting and iterating quickly; uses data to validate ideas and measure impact., • Commitment to ethical and responsible AI adoption, including privacy-by-design and safe use of tools.

Join Our Growing Team CSA provides the ideal place for you to develop or start your career in a fast-paced, diverse environment. At CSA Group, one of our guiding principles is to treat people with respect, and we appreciate diversity in their backgrounds, experiences and opinions. If you think you have what it takes to be an industry leader, send us your resume. Our Success For more than 65 years, CSA Group has contributed to developing stronger, more resilient facility and infrastructure solutions. Our experience brings plenty of opportunities for you to expand your skill set, challenge yourself, and make an impact. Social Commitments One of CSA Group’s most important Guiding Principles is our commitment to contribute to the industries we serve and the communities we live in. This translates into active involvement in a variety of activities and organizations, which provide many opportunities for education and growth for our employees. Responsibilities Priorities can often change in a fast-paced environment like ours, so this role includes, but is not limited to, the following responsibilities: • Support major projects involving the planning, design, and startup of water and wastewater treatment systems with a focus on process, pump stations, large diameter pipelines, biosolids, and odor control systems., • Work within project teams to complete projects to exceed client expectations for approach, scope, budget and schedule., • Demonstrate technical excellence in the performance of project assignments including planning, design and preparation of bid documents, project management, regulatory coordination, and construction services., • Assemble and present written recommendations on technical matters and prepare reports., • Inspect, test and evaluate collection, conveyance, distribution, and treatment systems and processes. Requirements Essential Skills and Experience: • Bachelor’s Degree in Civil, Environmental, Chemical, or Mechanical Engineering, • Registration as licensed Engineer-in-Training, • Interest/Experience in water and wastewater consulting field, • Prior experience in water and wastewater pipeline, pump station, and treatment facility design, rehabilitation, and construction, • Prior experience in process equipment selection, design and startup for pump stations, treatment plants and biosolids processing facilities., • Ability to prepare reports; evaluate pipelines, pump stations and/or treatment plants; and prepare design documents, • Familiar with environmental rules and regulations in the water and wastewater field, • Proficiency with AutoCAD and computer modeling for water systems, open channel flow, and sanitary/storm water systems and other computer applications, • Excellent oral and written communication skills, • Curiosity and interest in continuous learning in AI and comfort experimenting and iterating quickly; uses data to validate ideas and measure impact., • Commitment to ethical and responsible AI adoption, including privacy-by-design and safe use of tools.

About Eos Energy Enterprises Eos Energy Enterprises, Inc. is accelerating the shift to American energy independence with positively ingenious solutions that transform how the world stores power. Our breakthrough Znyth™ aqueous zinc battery was designed to overcome the limitations of conventional lithium-ion technology. It is safe, scalable, efficient, sustainable, manufactured in the U.S., and the core of our innovative systems that today provides utility, industrial, and commercial customers with a proven, reliable energy storage alternative for 3 to 12-hour applications. Eos was founded in 2008 and is headquartered in Edison, New Jersey. For more information about Eos (NASDAQ: EOSE), visit _. The Sr. Electrical Engineer is accountable for advanced development and design of battery management system electronics and controls for newly built energy storage systems, as well as maintaining existing designs and support the creation of automated test equipment for the product components. This role demands deep expertise in low-level circuit design, high-voltage layout practices, and compliance with safety standards. The ideal candidate will serve as a technical authority across design, testing, documentation, and cross-functional support. Responsibilities • Architect and implement low-level electronic circuits incorporating electrical isolation, microcontroller control systems, and precision analog front-ends, • Design and optimize circuit board layouts for high-impedance analog signals, ensuring compliance with creepage and clearance requirements for high-voltage applications, • Develop designs that meet global safety certification standards (e.g., UL, IEC), including documentation and testing support for regulatory submissions, • Lead comprehensive verification testing of electronic components and integrated product designs, ensuring performance, reliability, and safety., • Generate detailed reports on design rationale, test methodologies, and results to support engineering reviews and product documentation., • Maintain thorough design records and contribute to the development of operation manuals and user documentation., • Provide expert-level troubleshooting and technical support for manufacturing teams and field operations on released products, • Offer strategic technical guidance to engineering teams, production staff, and service personnel, fostering best practices and continuous improvement. Knowledge, Skills, and Abilities • Proficient in designing and validating electrical circuit boards, including hands-on testing and performance evaluation., • Ability to work in lab environment and understand how components fit into a larger system, • Solid understanding of embedded control systems and their practical applications across various domains., • Strong programming capabilities in C and C++, with working knowledge of Linux-based development environments., • Demonstrated ability to diagnose issues and implement design improvements for enhanced reliability and performance., • Familiarity with design for EMC and availability to trace down EMI issues, • Knowledgeable in safety certification processes, including compliance with standards such as UL and IEC., • Competent skills with communications protocols such as TCP/IP, CAN, i²C and SPI; use of Modbus, • Capable of identifying, evaluating, and integrating off-the-shelf components and equipment into system designs., • Strong cross-discipline system skills, • Understanding of hardware and physical system being controlled is required, • Comfort and experience with the hazard and safety protocols of high voltage equipment and other aspects of working with large-scale battery systems, • Ability to self-direct to a goal and achieve independent success, • Ability to mentor junior engineers and technicians, • A team-player attitude and strong written/verbal communication skills are a must Education and Experience • Bachelor's degree in Electric Engineering, Electronic Engineering, Computer Engineering, or Electrical Engineering Technology required, • Minimum of 8 years' experience required Additional Experience • Hardware and design, debug, and testing. PCB design., • Minimum eight years’ experience designed electronics, developing automated controls, and troubleshooting, • Engineering Design Software: EAGLE, IAR or similar software, • Embedded programming, communication interfaces; I²C, RS-485, CAN bus communication, Modbus TCP, remote IO, or flex IO systems (Moxa, Allen Bradley, SEL, Advantech), PLC programming experience, GDB or other debugging tools., • Linux, embedded systems, • High voltage electrical systems Travel • Local Travel - Less than 10%, • Overnight/North America - Less than 10% Working Conditions • Office Environment - Must be able to remain in a stationary position 50% of the time and occasionally move about inside the office to access file cabinets, office machinery, etc. Required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading. May be required to exert up to 25 pounds of force occasionally to lift, carry, push, pull or otherwise move objects, including the human body.

*Onsite 5 days a week* Overview The Quality Engineer will apply engineering knowledge, problem solving skills and ingenuity to resolve quality issues for all Humanscale Products. They will also drive continuous improvement for product and process performance. Essential Functions Customer Focus and Continuous Improvement • Directly responsible for ensuring all quality standards for products are met prior to shipment to customer, • Investigates, conducts tests or experiments, gathers data, and performs preliminary analysis for product performance issues., • Conducts root cause investigation and is responsible for driving the implementation of corrective action and preventive measures, • Directly responsible for customer complaint reduction to assigned Humanscale Product line, • Initiates, leads and participates in continuous improvement projects Operations • Works with experienced QEs to disposition non-conforming material, • Oversees efforts and works with production, inventory control and inspection teams to quarantine/segregate parts when nonconformance is identified, • Directs workers engaged in measuring, testing products and tabulating data concerning test set up and procedure to follow, • When sort/rework of nonconforming material is required, provides technical support as required, • Participates in Lean activities including Kaizen events and 6S audits Quality Systems • Develops and initiates standards and methods for inspection, testing, and evaluation, utilizing knowledge in mechanical and electrical engineering fields, • Devises sampling procedures and develops forms and instructions for recording, evaluating, and reporting quality and reliability data, • Contributes to the compilation/updating of training material, SOP’s, and QC Criteria as required Qualifications • B.S. degree or equivalent in a mechanical or electrical engineering discipline, • 0-2 years of experience in Quality Engineering (in an ISO certified manufacturing environment preferred), • Ability to read and understand engineering drawings, • Solid communication skills with the ability to work effectively in cross-functional teams, • Excellent interpersonal skills to lead cross-functional teams and drive projects to successful closure., • Ability to demonstrate accuracy and strong attention to detail, • Ability to work well in a team environment Physical Requirements • Sitting 70% - Walking/Standing 30%, • Must be able to lift up to 50lbs, • Long periods of close work on computer screen, • Interpret, analyze, research and handle multiple tasks simultaneously, • Climate controlled office space, • Use of hands to operate tools, install, adjust and attach parts, • Understanding and working with machines & mechanical systems, • Knowledge and ability to use computers & related technology efficiently, • The worker is required to have visual acuity, which is essential for task that require attention to detail, such as operating machinery or performing quality control Benefits • Competitive salary, • Medical Benefits (Medical, Dental, Vision), • HSA, FSA, Commuter Benefits, • Medical Discounts, • Ancillary Benefits, • Accident, Critical Illness, Hospital Insurance, • Voluntary, Spouse, and Child Life Insurance, • Pet Insurance, • Employee Discount Programs, • 401k matching, • Paid time off (including 15 PTO days and 11 holidays) Company Overview Humanscale is the premier designer and manufacturer of ergonomic products that improve health and comfort at work. We have a focus on sustainability with over 70% of our products currently certified as having a Net Positive impact on the environment. impact on the environment. Our award-winning office products – seating, sit/stand desks, technology support and lighting – have led the industry in performance and simplicity for 40 years. Salary Range: $68,032-$99,232 Please note that the salary information is a general guideline. Humanscale considers other factors such as (but not limited to) scope and responsibilities of the position, candidate’s work experience, education/training, key skills, internal peer equity, as well as market location and business considerations when extending an offer. Humanscale is an Equal Opportunity Employer (Disabled/Veteran) Scam Notice: Please be aware that there are individuals and organizations that may attempt to scam job seekers by offering fraudulent employment opportunities in the name of Humanscale. These scams may involve fake job postings, unsolicited emails, or messages claiming to be from our recruiters or hiring managers. Humanscale will never ask for any personal account information, such credit card details or bank account numbers, during the recruitment process.

Job Summary for ADMS Systems Engineer: The ADMS Technology Engineer plays a critical role in the full technology lifecycle of Advanced Distribution Management Systems. This position is responsible for the design, configuration, development, testing, deployment, and ongoing support of software, hardware, and integrated systems that support grid operations. The ADMS Technology Engineer collaborates closely with Analysts, Product Managers, System Operators, and cross functional technical teams to ensure solutions meet all business, functional, and reliability requirements. Job Qualifications and Responsibilities for ADMS Systems Engineer: • Perform peer reviews of technical designs, implementation plans, configuration settings, code, and deployment artifacts to ensure accuracy, completeness, cybersecurity compliance, and alignment with enterprise standards., • Troubleshoot escalated support issues, conduct root cause analysis, and recommend both short-term workarounds and long-term corrective actions., • Monitor system performance, review operational reports, and ensure ADMS functionality meets defined service levels, reliability expectations, and regulatory or operational standards., • Support deployment activities for new features, subsystems, modules, upgrades, patches, and defect resolutions across development, test, and production environments., • Conduct general system troubleshooting, including log analysis, configuration validation, trace review, and verification of recent changes to isolate and resolve issues., • Document procedures, system configurations, troubleshooting steps, and operational practices to support knowledge transfer and repeatability., • Perform workstation and server patching (Windows and Linux) and maintain environment readiness for project teams, including command line configuration when required., • Interpret and work with technical diagrams and documentation such as network topology diagrams, IP/LAN schemas, firewall configuration sheets, server architecture diagrams, and interface definitions.

We are At Synechron, we believe in the power of digital to transform businesses for the better. Our global consulting firm combines creativity and innovative technology to deliver industry-leading digital solutions. Synechron’s progressive technologies and optimization strategies span end-to-end Artificial Intelligence, Consulting, Digital, Cloud & DevOps, Data, and Software Engineering, servicing an array of noteworthy financial services and technology firms. Through research and development initiatives in our FinLabs we develop solutions for modernization, from Artificial Intelligence and Blockchain to Data Science models, Digital Underwriting, mobile-first applications and more. Over the last 20+ years, our company has been honored with multiple employer awards, recognizing our commitment to our talented teams. With top clients to boast about, Synechron has a global workforce of 14,500+, and has 58 offices in 21 countries within key global markets. Additional Information* The base salary for this position will vary based on geography and other factors. In accordance with law, the base salary for this role if filled within Piscataway, NJ is $125k - $135k/year & benefits (see below). Title: Senior IBM BPM/BAW Workflow Software Engineer Location: Piscataway, NJ / Charlotte, NC Workflow team is hiring a Workflow Software Engineer to join their team! This role builds and supports automation solutions, integrating with databases and APIs, and collaborates closely with delivery and partner teams with a focus on driving measurable improvements in quality and operational efficiency. • Partner with business stakeholders to gather requirements and lead process and workflow design sessions, • Design, build, and test BPM workflows and automation solutions end to end, • Collaborate with the workflow team and other technical teams to ensure high-quality integrations and reliable solutions, • Monitor and maintain BPM platforms, including performance tuning, upgrades, and defect resolution, • Diagnose and resolve workflow or system issues while providing ongoing technical support, • Create and maintain documentation for workflows, processes, configurations, and standards We are looking for someone with: • Associate or bachelor's degree (preference in a computer science, technology, engineering or math-related field or equivalent experience) and 3+ years' work experience or equivalent experience, • 5+ years of Hands-on experience in IBM BPM / IBM Business Automation Workflow (BAW) is required., • Excellent planning, organizational, problem-solving, analytical, decision-making and communication skills, • Proficiency with database applications, knowledge of web programming languages, mainframe systems, and/or distributed systems Skills That Will Help You Stand Out • Experience with ServiceNow Financial Services Operations and Customer Service Management (ServiceNow FSO and CSM) including FSO core data models, secure extensions, and CSM case management, • Familiarity with Advanced Work Assignment design and tuning, customer engagement, document and content integrations, and Performance Analytics reporting We offer: • A highly competitive compensation and benefits package., • A multinational organization with 58 offices in 21 countries and the possibility to work abroad., • 10 days of paid annual leave (plus sick leave and national holidays)., • Maternity & paternity leave plans., • A comprehensive insurance plan including medical, dental, vision, life insurance, and long-/short-term disability (plans vary by region)., • Retirement savings plans., • A higher education certification policy., • Commuter benefits (varies by region)., • Extensive training opportunities, focused on skills, substantive knowledge, and personal development., • On-demand Udemy for Business for all Synechron employees with free access to more than 5000 curated courses., • Coaching opportunities with experienced colleagues from our Financial Innovation Labs (FinLabs) and Center of Excellences (CoE) groups., • Cutting edge projects at the world’s leading tier-one banks, financial institutions and insurance firms., • A flat and approachable organization., • A truly diverse, fun-loving, and global work culture. SYNECHRON’S DIVERSITY & INCLUSION STATEMENT Diversity & Inclusion are fundamental to our culture, and Synechron is proud to be an equal opportunity workplace and is an affirmative action employer. Our Diversity, Equity, and Inclusion (DEI) initiative ‘Same Difference’ is committed to fostering an inclusive culture – promoting equality, diversity and an environment that is respectful to all. We strongly believe that a diverse workforce helps build stronger, successful businesses as a global company. We encourage applicants from across diverse backgrounds, race, ethnicities, religion, age, marital status, gender, sexual orientations, or disabilities to apply. We empower our global workforce by offering flexible workplace arrangements, mentoring, internal mobility, learning and development programs, and more. All employment decisions at Synechron are based on business needs, job requirements and individual qualifications, without regard to the applicant’s gender, gender identity, sexual orientation, race, ethnicity, disabled or veteran status, or any other characteristic protected by law.

• RELOCATION SUPPORT AVAILABLE. About our client: Our employer is the leading manufacturer of Premium Metal Payment Cards and also offers best-in-class Authentication and Digital Asset solutions. The Company's offerings combine elegance, simplicity, and security to deliver exceptional experiences and peace of mind, enabling trust for millions of people around the globe. Position Overview: This position is responsible for developing new products, product components, and production processes to support new product manufacturing. This engineer will be responsible for documenting new processes, creating technical drawings, and training individuals on newly developed processes. This is an excellent opportunity for an engineer to be technically creative and innovate in a highly desired consumer product segment. The R&D Engineer will work onsite 5 days a week out of our office in Somerset, NJ. Key Responsibilities: Research and Development: • Create and execute product enhancement, next generation, and new product development plans as assigned, • Be an independent thinker and ideate new products, • Work with management on new product goals, • Create new product prototypes, • Design tests and analyze test results to create viable products out of a design idea, • Document the new product development for seamless handover to production, • Develop new processes and manufacturing techniques to support new products, • Industrialize prototype process in preparation for manufacturing, • Help prepare invention disclosures for patent filing, • Identify and incorporate Client materials Process Improvement Process Improvement: • Identify innovative and improved methods for existing product lines, • Industrialize new processing techniques, • Qualify new materials or components for existing products Other Important Responsibilities: • Consistently demonstrate the ability to prioritize tasks to ensure most critical processes impacting business results are being addressed, • Thorough documentation of all product development activities as well as existing andnew process development, inclusive of progressive results, specific equipment parameters and work instructions where appropriate, • As part of the EMS - Environment Management System, will meet compliance obligations and accountability by contributing but not limited to the company's recycling guidelines, proper waste and other environmental performance practices, • Will be required to perform other job functions, as assigned Qualifications: • Minimum 3 years of experience, • BS or BEng Required, MS preferred. (Electrical Engineering is a plus), • Applied electrical engineering experience especially in RFID, • Circuit design and prototyping, • Electronic circuit footprint miniaturization, • CAD skills including 3D modeling, • Ability to relate to employees and understand their needs, • Excellent communication skills, both oral and written, • Strong attention to detail and ability to self-check own work, • Excellent time management skills, • Task oriented excellent organizational skills, ability to prioritize workload, • Enthusiastic attitude, cooperative team player, adaptable to new or changing circumstances, professional demeanor, sensitive to client needs, self-motivated, creative and innovative, • Excellent problem-solving skills, • High level of computer literacy including working knowledge of Microsoft Office applications and Outlook, • An aptitude for learning payment card business and adjacent fields. Preferred Skills and Qualifications: • Prior new product development experience, • Involvement with invention disclosure or patent preparation, • 3D Printing Experience, • Circuit design experience, • Coding/Programming Experience - Java, Flash, Android, • RELOCATION SUPPORT AVAILABLE.

Description On-site 4 days onsite in Edison, NJ. Our client seeks a Lead Software Engineer to own and lead a critical enterprise application. The role requires leadership, application ownership, and hands-on development across middleware, web services, and SQL Server. The engineer will design, develop, test, and support solutions, drive architectural decisions, and handle operational data requests, including large-scale SQL updates. The position is on-site four days per week in New Jersey and will require on-site interviews. We can facilitate w2 and corp-to-corp consultants. For our w2 consultants, we offer a great benefits package that includes Medical, Dental, and Vision benefits, 401k with company matching, and life insurance. Rate: $72.00 to $80.00/hr. w2 JN -072026-107963 Responsibilities • Lead and own an enterprise application, serving as the primary technical leader., • Design, re-design, code, test, debug, configure, and document software solutions for insurance business needs., • Ensure requirements are complete, consistent, feasible, and unambiguous., • Collaborate with business analysts, project managers, QA, and third parties including data providers and software vendors., • Create project inputs for plans, estimates, and schedules, and deliver organized presentations., • Perform impact analysis and apply design methodologies and best practices., • Proactively identify and resolve quality and performance issues across environments., • Research, coordinate, and track issues to resolution, including production performance concerns. Experience Requirements • Minimum 5 years of software engineering experience., • Expert-level SQL Server skills, including complex queries, joins, data analysis, data mining, performance tuning, and large-scale update scripts. Experience with DB2 and MS SQL Server., • Strong middleware and web services experience, including service-layer architecture and integrations., • Full-stack background with Java/J2EE 8+, Spring MVC, REST, JMS, JBOSS, ESB (Mule), JSON, MyBatis, XML, XSLT, SOAP, Maven., • Front-end experience with Angular v11+, TypeScript/JavaScript, and CSS libraries such as Bootstrap and PrimeNG., • AWS knowledge is a plus, including Lambda, S3, and application development for AWS., • Ability to design maintainable solutions and produce comprehensive technical documentation., • Demonstrated leadership, ownership, independent execution, and effective communication across stakeholders.

We are At Synechron, we believe in the power of digital to transform businesses for the better. Our global consulting firm combines creativity and innovative technology to deliver industry-leading digital solutions. Synechron’s progressive technologies and optimization strategies span end-to-end Artificial Intelligence, Consulting, Digital, Cloud & DevOps, Data, and Software Engineering, servicing an array of noteworthy financial services and technology firms. Through research and development initiatives in our FinLabs we develop solutions for modernization, from Artificial Intelligence and Blockchain to Data Science models, Digital Underwriting, mobile-first applications and more. Over the last 20+ years, our company has been honored with multiple employer awards, recognizing our commitment to our talented teams. With top clients to boast about, Synechron has a global workforce of 17,000+, and has 58 offices in 22 countries within key global markets. We are At Synechron, we believe in the power of digital to transform businesses for the better. Our global consulting firm combines creativity and innovative technology to deliver industry-leading digital solutions. Synechron’s progressive technologies and optimization strategies span end-to-end Artificial Intelligence, Consulting, Digital, Cloud & DevOps, Data, and Software Engineering, servicing an array of noteworthy financial services and technology firms. Through research and development initiatives in our FinLabs we develop solutions for modernization, from Artificial Intelligence and Blockchain to Data Science models, Digital Underwriting, mobile-first applications and more. Over the last 20+ years, our company has been honored with multiple employer awards, recognizing our commitment to our talented teams. With top clients to boast about, Synechron has a global workforce of 17,000+, and has 58 offices in 22 countries within key global markets. Our challenge Workflow team is hiring a Senior IBM BPM Workflow Software Engineer to join their team! This role builds and supports automation solutions, integrating with databases and APIs, and collaborates closely with delivery and partner teams with a focus on driving measurable improvements in quality and operational efficiency. Additional Information* The base salary for this position will vary based on geography and other factors. In accordance with law, the base salary for this role if filled within Piscataway, NJ is $115k - $125k/year & benefits (see below). Responsibilities: • Partner with business stakeholders to gather requirements and lead process and workflow design sessions, • Design, build, and test BPM workflows and automation solutions end to end, • Collaborate with the workflow team and other technical teams to ensure high-quality integrations and reliable solutions, • Monitor and maintain BPM platforms, including performance tuning, upgrades, and defect resolution, • Diagnose and resolve workflow or system issues while providing ongoing technical support, • Create and maintain documentation for workflows, processes, configurations, and standards Operating at the intersection of financial services and technology, the Principal builds financial tools that help our customers live better lives. We take pride in being a purpose-led firm, motivated by our mission to make financial security accessible to all. Our mission, integrity, and customer focus have made us a trusted leader for more than 140 years. Required Qualifications: • Associate or bachelor's degree (preference in a computer science, technology, engineering or math-related field or equivalent experience) and 3+ years' work experience or equivalent experience, • 5+ years of Hands-on experience in IBM BPM / IBM Business Automation Workflow (BAW) is required., • Excellent planning, organizational, problem-solving, analytical, decision-making and communication skills, • Proficiency with database applications, knowledge of web programming languages, mainframe systems, and/or distributed systems Additional skills: • Experience with ServiceNow Financial Services Operations and Customer Service Management (ServiceNow FSO and CSM) including FSO core data models, secure extensions, and CSM case management, • Familiarity with Advanced Work Assignment design and tuning, customer engagement, document and content integrations, and Performance Analytics reporting We offer: • A highly competitive compensation and benefits package., • A multinational organization with 60 offices in 20 countries and the possibility to work abroad., • 10 days of paid annual leave (plus sick leave and national holidays)., • Maternity & paternity leave plans., • A comprehensive insurance plan including medical, dental, vision, life insurance, and long-/short-term disability (plans vary by region)., • Retirement savings plans., • A higher education certification policy., • Commuter benefits (varies by region)., • Extensive training opportunities, focused on skills, substantive knowledge, and personal development., • On-demand Udemy for Business for all Synechron employees with free access to more than 5000 curated courses., • Coaching opportunities with experienced colleagues from our Financial Innovation Labs (FinLabs) and Center of Excellences (CoE) groups., • Cutting edge projects at the world’s leading tier-one banks, financial institutions and insurance firms., • A flat and approachable organization., • A truly diverse, fun-loving, and global work culture. S YNECHRON’S DIVERSITY & INCLUSION STATEMENT Diversity & Inclusion are fundamental to our culture, and Synechron is proud to be an equal opportunity workplace and is an affirmative action employer. Our Diversity, Equity, and Inclusion (DEI) initiative ‘Same Difference’ is committed to fostering an inclusive culture – promoting equality, diversity and an environment that is respectful to all. We strongly believe that a diverse workforce helps build stronger, successful businesses as a global company. We encourage applicants from across diverse backgrounds, race, ethnicities, religion, age, marital status, gender, sexual orientations, or disabilities to apply. We empower our global workforce by offering flexible workplace arrangements, mentoring, internal mobility, learning and development programs, and more. All employment decisions at Synechron are based on business needs, job requirements and individual qualifications, without regard to the applicant’s gender, gender identity, sexual orientation, race, ethnicity, disabled or veteran status, or any other characteristic protected by law.

Hello, 🚨 HIRING: ADMS System Engineer 📍 Location: South Plainfield, NJ 🏢 Work Model: Hybrid 📅 Contract: 1 Year 🇺🇸 Visa: US Citizens & Green Card Holders ONLY We are seeking an experienced ADMS System Engineer to support the full technology lifecycle of Advanced Distribution Management Systems (ADMS), including implementation, integration, testing, deployment, troubleshooting, and production support. 🔹 Key Responsibilities • Translate business and operational requirements into technical solutions and ADMS configurations, • Support ADMS implementation and production operations, • Perform system troubleshooting, log analysis, configuration validation, and root cause analysis, • Support deployments, upgrades, patches, defect fixes, and production releases, • Integrate and test interfaces across SCADA, OMS, GIS, DMS, Historian, ICCP, and enterprise systems, • Perform Windows/Linux workstation and server patching and command-line configuration, • Review technical designs, configurations, code, and deployment artifacts, • Monitor system performance, reliability, and operational service levels, • Work with network, cybersecurity, operators, vendors, and cross-functional technical teams, • Maintain technical documentation, troubleshooting procedures, and system configurations, • Support virtualized environments including VMware vCenter, • Develop operational/analytical reports and Power BI dashboards, • Assist end users with access, configuration, and functional issues ⭐ Must-Have Skills ✅ ADMS implementation & production support ✅ ADMS / Grid Operations Systems Integration ✅ Systems Troubleshooting & Root Cause Analysis ✅ Experience with SCADA / OMS / GIS / DMS integrations ✅ Windows & Linux environments ✅ Strong technical documentation and communication skills

Job Title: Senior Finance & Operations Systems Engineer Location: Remote in New York City, Boston, or the DC metro areas Position: Full-Time Direct Hire ️ Join an Industry-Leading Organization TalentFish is casting a line for a Senior Finance & Operations Systems Engineer for our premier global client. Candidates must reside near New York City, Boston, or Washington, DC metro areas. We are seeking a dynamic, high-performing individual who demonstrates a strong aptitude for learning new technologies. Overview: The Senior Finance & Operations Systems Engineer is responsible for the day-to-day management and support of various enterprise solutions in close collaboration with other IT teams. Serving as the primary point of contact for technical issues, this role partners with business users to ensure system health, stability, and ongoing improvement. What You Will Do • Support and drive forward enterprise applications and platforms such as EIS, Intapp Time,, • Emburse, eBillingHub, Elite 3E, including Design Gallery, Proforma, Star Collect, Client Travel, and OfficeSpace., • Lead application implementations, upgrades, enhancements, troubleshooting, and roadmaps., • Develop in 3E IDE and Design Gallery., • Conduct development activities, including analysis and solution design, along with hands-on development across application layers., • Direct oversight and management of various solutions as assigned., • Act as subject matter expert for those systems and provide technical support as needed. Ensure the health and stability of all solutions owned., • Monitor, track, and report on performance and capacity. Responsible for capacity planning., • Under the direction of the Senior Manager, Enterprise Applications, engage with the business as needed in supporting the above., • Work with the relevant IT teams in developing and delivering enhancements and new capabilities., • Drive and manage those efforts., • Deliver recommendations to the business and IT leadership based on an understanding of the platform, roadmap, and related business drivers., • Maintain current and accurate architecture and support documentation for use by both engineering teams and support staff., • Adhere to and participate in the Firm's Change Management process., • Provide regular updates and reporting to both the Senior Manager, Enterprise Applications, and the Director of Applications., • Collaborates in the creation and use of training and QA materials and activities for applications supported., • Provides coaching to junior analysts on troubleshooting and best practices., • Know common legal enterprise solutions. Advanced knowledge of enterprise applications on-premises, in the cloud, and hybrid., • Work with product vendors and procurement., • Possess strong communication, organization, negotiation, critical thinking, and leadership skills as well as exceptional customer service and collaboration abilities; and Work with QA on test scripts, procedures, and remediation. What You Will Bring Qualifications • Bachelor's degree in Computer Science, Engineering, Information Systems, or related preferred, or equivalent work experience., • Working knowledge of legal technology solutions preferred., • 7 + years of general IT and systems work., • 5 + years' experience supporting Elite 3E or Aderant, preferably in a professional services or legal industry environment. Experience and Proficiencies • Advanced 3E or Aderant support., • Advanced knowledge of Elite 3E accounting/billing systems., • Knowledge of multi-tier architecture, including servers, databases, proxies, load balancing, trust/access rights, certificates, and integrations., • Knowledge of Windows Server, including IIS, services, scheduled tasks, logging, and configurations., • Knowledge of SQL Server, SQL development/queries, and reporting tools, especially Power BI., • Intermediate knowledge of system integrations, including APIs, web services, FTP, and database-to-database., • Ability to work with project management on plans, tasks, and resource management and tools such as Confluence and JIRA., • Familiarity with security best practices and procedures., • Familiarity with data governance best practices and procedures; and, • Familiarity with related IT departments such as infrastructure, desktop, service desk, development, operations, and telecommunications., • Possesses excellent communication skills, with the ability to work independently and drive the successful delivery of innovative solutions to the business., • Highly organized, accountable, and demonstrate a strong commitment to delivering client service excellence. Compensation and Employment This role requires authorization to work in the U.S. without current or future visa sponsorship. The expected salary range for this position is $135,000 - $190,000 per year, depending on experience, qualifications, and location. This role is eligible for bonuses based on individual contributions and firm profitability. Full-Time employees receive full comprehensive benefits such as Medical, Dental, Vision, Life, Disability, 401K, and more! TalentFish is committed to pay transparency and equal opportunity. The salary range provided complies with applicable state and federal regulations. All offers are contingent upon the completion of a background check, which may include, but is not limited t,o reference checks, education verification, employment verification, drug testing, criminal records checks, and any required certifications or compliance requirements based on the end client's background check policies and applicable laws. About TalentFish TalentFish is an employee-owned company pioneering a new realm in talent acquisition. We are redefining IT staffing by evolving AI, video screening, and our unique platform. TalentFish focuses on providing the best employee, consultant, and client experience possible. At TalentFish, we are an Equal Opportunity Employer; we embrace and encourage diversity.

The Chief Boiler Room Engineer coordinates, directs and supervises employees engaged in the operation and maintenance of steam generation, central air conditioning, chilled water system and all the units it supplies along with the Power Plant equipment at the Perth Amboy Division. Responsibilities • Manage the operation of two 600 HP Clever Brooks boilers., • Manage the blow down of each boiler., • Manage the cleaning of the boiler nozzle., • Maintain proper handling of fuel temperature, pumps, electric and steam heaters to the boilers., • Maintain the proper chemical testing and water treatment to the water and boilers., • Manage the steam pressure needs of the Medical Center at all times., • Maintain a cost effective fuel/steam usage by proper operation, sizing and placement of steam traps throughout the Medical Center., • Maintain the proper flow and operation of all condensate stations including the operation of the D.A. tank in the Power Plant., • Maintain the boiler burners at optimal operating efficiency at all times through the proper operation of the economizer., • Proper logging on blow-downs, water treatment, boiler maintenance operation, including fuel usage, fuel consumed versus steam production and steam pressure, on a daily basis to be incorporated into a monthly report to be completed on the second working day of each month., • Check operation for compliance of safety regulations and maintain optimum standards of safety and fire prevention regulations among employees., • Initiate the ordering of fuel, water treatment chemicals, boiler chemicals and general repair supplies for upkeep of the Power Plant within the authorization of the Director/Plant Operations/Maintenance., • Maintain the proper state licensing credentials and all mandated equipment. Control Chilled Water System • Manage operation of the three chillers, and the logging of the pressures., • Manage and maintain the operation of the three condensing water towers along with the chemical feeding of the water., • Manage and log the proper G.P.M. of chilled water to each supply unit., • Responsible through the contracting vendor to maintain proper winterizing and spring start up and emergency calls of the chillers., • Air handling units, responsible for the operation, preventive maintenance and cleanliness of all air handling systems, including the machine rooms in which they are located. Compressed Air, Medical Suction Unit and Plant Air Conditioning • Responsible for logging and maintaining the proper PSI, 100 lbs. of compressed air to the Medical Center including the maintenance and cleanliness of the units., • Responsible for the proper operation of the suction compressor, to maintain 26 inches of vacuum with a differential of 15 inches for restart including the maintenance and cleanliness of the units., • Responsible for the proper operation of the plant air compressor system. Water Softener • Manage the responsibility of maintaining logs and proper softness of water (under 4 ppm) along with the testing, regeneration and level of salt in the brine tank. Domestic Hot/Cold Water System In The E.S.F. Building, • Manage the responsibility to the filtration and back flushing of the water filtering system., • The responsibility of logging and maintaining the city water booster pumps in proper operating (70-80 PSI) and alarm free condition., • Manage the logging, monitoring and maintenance of hot water at a temperature of 120 degrees Fahrenheit maximum, through steam and recycling pumps. Emergency Generator • Manage the responsibility to have the emergency generators in top operational running condition at all times, through preventive maintenance, weekly testing (under load), and the utilization of the electrical tie breakers to combine loads during a test or failure of any generator., • To maintain a running log of hours in operation, down time and repairs. Other • To interview sales representatives and make recommendations for purchase of equipment and supplies within established hospital policies., • Check time sheets, schedule holiday and vacation time not to interfere with. the operation of the E.S.F. Building., • Subject to approval, to interview, select and hire personnel, to determine job service objectives, work method and performance standards and appraise performance of employees., • Other duties and/or projects as assigned., • Adheres to HMH Organizational competencies and standards of behavior. Qualifications Education, Knowledge, Skills and Abilities Required: • High School diploma, general equivalency diploma (GED), and/or GED equivalent programs., • Blue Seal Operating Engineer License., • Five (5) years boiler room experience or four (4) years boiler room experience and one (1) year maintenance in addition to one (1) year of refrigeration experience, • Excellent written and verbal communication skills., • Proficient computer skills that include but are not limited to Microsoft Office and/or Google Suite platforms. Education, Knowledge, Skills and Abilities Preferred: • Not Applicable. Licenses and Certifications Required: • New Jersey Blue Seal License. Licenses and Certifications Preferred: • Red Seal Operating Engineer License. If you feel that the above description speaks directly to your strengths and capabilities, then please apply today! Compensation Minimum rate of $107,952.00 Annually HMH is committed to pay equity and transparency for our team members. The posted rate of pay in this job posting is a reasonable good faith estimate of the minimum base pay for this role at the time of posting in accordance with the New Jersey Pay Transparency Act and does not reflect the full value of our market-competitive total rewards package. The starting rate of pay is provided for informational purposes only and is not a guarantee of a specific offer. Posted hourly rates may be stated as an annual salary in the offer and posted annual salaries may be stated as an hourly rate in the offer, depending on the level and nature of the job duties and credentials of the candidate. The base compensation determined at the time of the offer may be different than the posted rate of pay based on a number of non-discriminatory factors, including but not limited to: • Labor Market Data: Compensation is benchmarked against market data to ensure competitiveness., • Experience: Years of relevant work experience., • Education and Certifications: Level of education attained, including specialized certifications, credentials, completed apprenticeship programs or advanced training., • Skills: Demonstrated proficiency in relevant skills and competencies., • Geographic Location: Cost of living and market rates for the specific location., • Internal Equity: Compensation is determined in a manner consistent with compensation ranges for similar roles within the organization., • Budget and Grant Funding: Departmental budgets and any grant funding associated with the job position may impact the pay that can be offered. Some jobs may also be eligible for performance-based incentives, bonuses, or commissions not reflected in the starting rate. Certain positions may also be eligible for shift differentials for work performed on evening, night, or weekend shifts. In addition to our compensation for full-time and part-time (20+ hours/week) job positions, HMH offers a comprehensive benefits package, including health, dental, vision, paid leave, tuition reimbursement, and retirement benefits. HACKENSACK MERIDIAN HEALTH (HMH) IS AN EQUAL OPPORTUNITY EMPLOYER All qualified applicants will receive consideration for employment without regard to age, race, color, creed, religion, sex, sexual orientation, gender identity or expression, pregnancy, breastfeeding, genetic information, refusal to submit to a genetic test or make available to an employer the results of a genetic test, atypical hereditary cellular or blood trait, national origin, nationality, ancestry, disability, marital status, liability for military service, or status as a protected veteran.

We are actively seeking a highly skilled Mechanical Designer with a specialization in deep drawn metal stamping to join our innovative engineering team. This position requires a detail-oriented engineer with a comprehensive understanding of product design and advanced manufacturing processes, specifically in high-client metal forming techniques. Responsibilities: • Design, develop, and optimize tooling and fixtures for deep drawn metal stamping processes. Ensure these designs facilitate maximum productivity, efficiency, and quality throughout the manufacturing workflow., • Work closely with multidisciplinary teams, including production, quality assurance, research and development, and supply chain management, to develop creative and practical solutions to complex manufacturing challenges., • Utilize advanced CAD software tools (such as SolidWorks, AutoCAD, or CATIA) to create detailed 2D and 3D models. Generate comprehensive engineering drawings conforming to industry standards to facilitate clear communication of design intent., • Conduct thorough feasibility analyses and computer simulations to evaluate design concepts, optimize deep drawing processes, and anticipate potential manufacturing issues prior to production., • Select appropriate materials and establish manufacturing processes and tolerances that align with design specifications, regulatory standards, and customer requirements, ensuring high-quality deliverables., • Perform detailed root cause analysis on production anomalies and implement effective corrective actions, utilizing methodologies such as 5 Whys, Fishbone Diagrams, or Failure Mode and Effects Analysis (FMEA) to enhance process reliability., • Oversee the prototyping phase, developing initial models for testing. Analyze test results rigorously and make iterative adjustments to designs based on empirical data and feedback from production teams to refine product performance., • Actively participate in continuous improvement initiatives, employing Lean Manufacturing principles and Six Sigma methodologies to enhance process efficiencies, reduce waste, and lower production costs., • Maintain meticulous documentation of design processes, modifications, and specifications. Ensure all design changes are accurately recorded and communicated to relevant stakeholders for future reference. Requirements: • Minimum of 5 years of experience in mechanical design and engineering within deep drawn metal stamping, ideally in high-volume manufacturing environments such as automotive, aerospace, or industrial machinery sectors., • Advanced proficiency in CAD software and familiarity with simulation tools for finite element analysis (FEA) and computational fluid dynamics (CFD)., • Strong understanding of metallurgy, metal forming mechanics, and manufacturing processes, including deep drawing, stamping, and machining., • Exceptional problem-solving skills, with a systematic approach to troubleshooting and overcoming design and manufacturing challenges., • Excellent verbal and written communication skills, enabling clear dialogue with team members, suppliers, and customers to ensure alignment and project success., • Project Management Experience: Proven experience in project management, with the ability to lead and manage multiple design projects simultaneously from conception through to production., • Lean and Six Sigma Knowledge: Certification or demonstrable knowledge of Lean Manufacturing principles and Six Sigma methodologies to foster a culture of continuous improvement. Education: • Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, Materials Science, or a related engineering discipline. We offer attractive, competitive compensation and benefits including, medical, dental, 401k, short-term disability, AD&D, tuition reimbursement, and more. If you take pride in your work and are committed to personal and professional success, let's talk. Zobility is RGBSI's workforce management and staffing division. RGBSI is a multi-national corporation headquartered in Troy, MI with branches throughout the USA, Canada, Germany, and India.

Job Description Company Overview: Harris Energy Solutions, LLC (HES) offers nationwide Energy Consulting Services, specializing in a wide range of energy management solutions. Our distinguished team includes skilled Engineers, Certified Energy Managers (CEM), Certified Building Commissioning Professionals (CBCP), and Solar Design Specialists. With extensive experience across various facets of energy management, HES excels in services such as building energy modeling, renewable energy consulting, master planning, energy auditing, and building commissioning. Our commitment to excellence and innovation ensures we deliver tailored, cutting-edge solutions that meet the unique energy needs and goals of our clients across the nation. Job Description: The Senior Commissioning Engineer is responsible for leading the commissioning process across all projects, ensuring that building systems are designed, installed, tested, and maintained to perform in accordance with the owner's operational requirements. This role will manage a team of commissioning professionals, collaborate with internal and external stakeholders, and develop strategies to improve commissioning practices and quality assurance across the organization. Key Responsibilities: • Lead and oversee all commissioning activities for new and existing projects across the organization., • Develop and implement company-wide commissioning policies, standards, and procedures., • Develop and oversee the full commissioning process, from design through occupancy and post-occupancy evaluation., • Manage and lead a multidisciplinary commissioning team, including internal staff and external consultants., • Ensure compliance with project specifications, codes, standards, and sustainability guidelines (e.g., LEED, ASHRAE, ISO)., • Coordinate closely with architects, engineers, contractors, and facility operators to integrate commissioning activities into project workflows., • Oversee functional performance testing of all building systems including HVAC, electrical, plumbing, life safety, controls, and specialty systems., • Review design documents and submittals to identify commissioning requirements and influence quality outcomes., • Develop commissioning plans, checklists, test scripts, and final reports for project documentation., • Monitor progress, resolve issues, and ensure commissioning milestones are met on time and within budget., • Identify and resolve system performance issues prior to building turnover., • Lead training sessions for facilities staff on system operations and maintenance., • Track and report on commissioning progress, budgets, and resource allocation., • Lead and manage Measurement and Verification (M&V) activities to validate energy performance, optimize building systems, and ensure alignment with energy goals and design intent. Incorporate M&V activities into Cx Plans and communicate requirements to facilities staff prior to building turnover., • Provide technical guidance and mentorship to team members and stakeholders., • Continuously improve commissioning processes and implement best practices across all projects., • Develop and implement training programs for junior commissioning engineers, including hands-on learning, technical on-boarding, mentorship, and professional development planning., • Promote a culture of technical excellence, accountability, and continuous learning within the commissioning team. Education and Experience Requirements: • Bachelor's degree in Mechanical, Electrical, or Building Engineering, or a related field, • Minimum of 8 years of experience in project management, building systems commissioning, and/or facilities management, with at least 5 years in a leadership or management role., • Certifications Preferred: PE, CCP, CBCP, BCxP, CxA, LEED AP with specialty, PMP, • Experience with energy modeling and M&V frameworks such as IPMVP, • Deep understanding of mechanical, electrical, and controls systems., • Stay current on industry best practices, emerging technologies, and compliance standards (ASHRAE, IEEE, NFPA, etc.), • Proven ability to manage large-scale and complex commissioning projects., • Experience with Data Center/Mission Critical Commissioning and Hospital Commissioning a plus., • Strong leadership, communication, and organizational skills, • Ability to travel to project sites as needed Applicants must be legally authorized to work in the U.S. without the need for current or future employer-sponsored work authorization Job Type: Full-time Pay: $110,000 – $130,000 per year Benefits: • 401(k) (Traditional and Roth options), • 401(k) Safe Harbor, • Medical Insurance, • Dental Insurance, • Vision Insurance, • HSA option, • Paid Time Off, • Paid Holidays, • Profit Share Plan, • Company Covered Disability Insurance (LTD, STD), • Company Covered Life Insurance, • Company Covered Financial Advising Schedule: • 8-hour shift, • Hybrid with 3 office days Work Location: Piscataway, NJ & Whitestone, NY (Hybrid - T/W/Th in office) EEO Statement: All qualified applicants will receive consideration for employment without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, or sex.

Job Description About GenScript Founded in 2002 in New Jersey, GenScript Biotech Corporation accelerates innovation in biotech and healthcare by providing researchers and companies with the building blocks needed to develop groundbreaking treatments and products. Guided by its mission to Make People and Nature Healthier Through Biotechnology, and its role as a well-recognized biotechnology company, GenScript has a team of approximately 6,165 employees and has served more than 200,000 customers across over 100 countries and regions. Job Title: Enterprise AI Agent Development Engineer Supervisor: Head of AI for Industry, Digital & Intelligent Technology Center Location: Piscataway, NJ (Onsite) Compensation: Targeting $150,000 - $180,000 based on experience level. Key Responsibilities • Design, develop, test, and continuously optimize enterprise AI Agents., • Build capabilities such as task planning, tool calling, and workflow orchestration using large language models., • Integrate AI Agents with enterprise systems, including ERP, CRM, OA, supply chain, and order management systems, to automate cross-system business processes., • Develop and optimize enterprise system interfaces and Agent tools., • Collaborate with product and business teams to deploy AI Agent solutions in real-world enterprise scenarios.Qualifications, • Master's degree or above in Computer Science, Artificial Intelligence, Software Engineering, or a related field, and at least 3 years work experience., • Strong software engineering fundamentals and proficiency in Java and Python., • Experience in large language model application development, with an understanding of prompt engineering and function calling., • Hands-on experience with Agent development frameworks, particularly LangGraph and Agent Scope., • Familiarity with APIs, databases, microservices, and common enterprise system integration methods., • Strong system design, problem-solving, communication, and collaboration skills., • Fluency in Mandarin Chinese and English to collaborate effectively with internal and external stakeholders.Preferred Qualifications, • Experience developing and deploying enterprise AI Agent solutions., • Experience integrating ERP, CRM, OA, supply chain, or order management systems., • Familiarity with MCP, OAuth 2.0, SSO, and RBAC., • Experience with complex workflow orchestration, multi-Agent collaboration, or private deployment of large language models. #LI-EB1 #GS Benefits: Benefits include medical, dental, and vision insurance as well as a 401(k) retirement plan with a company match that vests fully on day one. We offer paid parental leave after just three (3) months of employment, and a paid time off policy that includes vacation time, personal time, sick time, floating holidays, and company holidays. Additional benefits include flexible spending and health savings accounts, life and AD&D insurance, short- and long-term disability coverage, legal assistance, and supplemental plans such as pet, critical illness, accident, and hospital indemnity insurance. We also provide commuter benefits, well-being initiatives, and peer-to-peer recognition programs; demonstrating our ongoing commitment to building a culture where our people feel empowered, supported, and inspired to do their best work. GenScript USA Inc/ProBio Inc. is a proud equal opportunity/affirmative action employer committed to attracting, retaining, and maximizing the performance of a diverse and inclusive workforce. It is the Company's policy to ensure equal employment opportunity without discrimination or harassment based on race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity or expression, age, disability, national origin, marital or domestic/civil partnership status, genetic information, citizenship status, uniformed service member or veteran status, or any other characteristic protected by law. GenScript USA Inc./ProBio Inc. maintains a drug-free workplace. Please note: Genscript USA Inc./ProBio Inc. will only contact candidates through verified application sources. GenScript/Probio does not request personal information from candidates through individual email or any other platform.

Job Description Job Title: Junior and Senior Electrical Engineer - Data Center Facilities Job Type: Full-time Job Location: On-Site Edison, NJ (This is not a remote or hybrid job) Company Overview: BRUNS-PAK, an Information Technology/Data Center Facilities (A/MEP) firm, helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure that support operations in an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices. Artificial Intelligence and High-Performance Compute included. Job Description: BRUNS-PAK is seeking an experienced and highly skilled Senior Electrical Engineer specializing in the design of electrical systems for Data Centers and Mission Critical Facilities. The ideal candidate should possess a solid background in designing appropriately sized Electrical Service, Generators, Switchgear, UPS Systems, transformers, PDU’s, and other Mission Critical equipment, incorporating reliability and redundancy into their designs. Key Responsibilities: • · Design and develop electrical systems for Data Center Facilities, ensuring reliability, redundancy, and efficiency., • · Utilize AutoCAD and potentially Revit for effective design and documentation., • · Apply diversified knowledge of engineering principles and practices to a variety of assignments in related fields., • · Make informed and independent decisions regarding engineering methods and techniques., • · Consult with supervisor on critical issues, new concepts, and policy matters, seeking guidance as needed., • · Develop test procedures and provide support during the commissioning of electrical equipment., • · Develop comprehensive specifications. Qualifications: • · Minimum of 10-15 years of relevant experience in electrical engineering, preferably in the field of Data Center Facilities., • · Junior Electrical Engineer – 10-15 years experience., • · Senior Electrical Engineer – 15+ years experience., • · Proficiency in AutoCAD 2D design is essential, and experience with Revit design is a plus., • · Registration as a licensed Professional Engineer (PE) is usually required for this position (Senior). Requirements: • · Extensive experience in designing electrical systems for Data Center Facilities., • · Strong knowledge of Generators, Switchgear, UPS Systems, Transformers, PDU’s, and other Mission Critical equipment., • · Ability to integrate reliability and redundancy into electrical system designs., • · Excellent problem-solving skills and ability to apply engineering principles to diverse assignments., • · Ability to effectively communicate technical solutions to diverse audiences both orally and in writing. Work Schedule: Normal business hours are Monday thru Friday 8-5pm. This role requires project travel. Benefits: • · Comprehensive Benefits which include Medical, Dental, Vision, Life Insurance and paid time off., • · Salary is based on skill and experience., • · 401K Match to $3,500, • · Performance Awards, • · Longevity Plan, • Year End Bonuses Subject to Corporate Profitability\nCompany Description BRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments. We engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures. BRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments.\r\n\r\nWe engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.

Job DescriptionCompany Description Eurofins Scientific is an international life sciences company, providing a unique range of analytical testing services to clients across multiple industries, to make life and our environment safer, healthier and more sustainable. From the food you eat, to the water you drink, to the medicines you rely on, Eurofins laboratories work with the biggest companies in the world to ensure the products they supply are safe, their ingredients are authentic and labelling is accurate. The Eurofins network of companies is the global leader in food, environment, pharmaceutical and cosmetic product testing and in agroscience Contract Research Organization services. It is one of the market leaders in certain testing and laboratory services for genomics, discovery pharmacology, forensics, advanced material sciences and in the support of clinical studies, as well as having an emerging global presence in Contract Development and Manufacturing Organizations. It also has a rapidly developing presence in highly specialized and molecular clinical diagnostic testing and in-vitro diagnostic products. In over 30 years, Eurofins has grown from one laboratory in Nantes, France to 58,000 staff across a decentralized and entrepreneurial network of 900 laboratories in over 54 countries. Eurofins companies offer a portfolio of over 200,000 analytical methods to evaluate the safety, identity, composition, authenticity, origin, traceability and purity of biological substances and products. 2025, Eurofins generated total revenues of EUR € 7.296 billion, and has been among the best performing stocks in Europe over the past 20 years. Job Description The Senior FSE is considered a subject matter expert in the field of Calibrations, Preventative Maintenance and Repairs and the technical authority for the calibration and certification of clean rooms, biosafety cabinets and other controlled environments. They are expected to be CETA certified, write protocols, methods and SOP’s within their field of expertise, train and direct calibrations, qualifications, and certifications, and review and approve certification work carried out by other field service personnel. The role holds the professional credential on which the business's certification registration depends. The business will operate initially under CETA registration, and the role is accountable for building the operating record, testing hours and customer endorsements required to obtain NEBB Cleanroom Performance Testing firm certification, and for holding the NEBB certification personally on the firm's behalf. Certification Delivery • Perform and authenticate certification and requalification of cleanrooms and controlled environments, including:, • Airflow velocity and volume testing, unidirectional and non-unidirectional, • HEPA and ULPA filter installation leak testing by aerosol photometer or discrete particle counter scanning, • Room pressurization and pressure cascade verification, • Airflow visualization studies, including recording and interpretation, • Recovery testing and containment leak testing, • Non-viable airborne particle counting and ISO classification, including sample location determination, • Biosafety cabinet and fume hood certification to NSF/ANSI 49, • Isolator, RABS and glovebox testing, including glove integrity, • Author test methods, certification protocols and standard operating procedures for the service line, and maintain them through revision., • Review and approve certification reports produced by other engineers and technicians., • Investigate out-of-specification results and support customer deviation and corrective action processes, • Train and direct field service personnel carrying out clean room certifications, including technicians outside of the direct reporting line., • Establish and maintain the business's CETA registration, and deliver all certification work to CETA standards from appointment., • Build the record required for NEBB CPT firm certification — continuous operating history, annual cleanroom testing hours, instrument ownership, local chapter membership and endorsement letters — and manage the application., • Obtain NEBB CPT certification personally, completing the Technician examinations and subsequently the Certified Professional examinations, so that the business can authenticate NEBB Certified Reports., • Maintain relationships with customers and awarding authorities who may provide endorsement in support of firm certification., • Support the evaluation and, if pursued, the technical scope of ISO 17025 accreditation for physical certification. Team • Establish the training and qualification pathway for certification engineers and technicians within and outside the direct reporting line., • Train, mentor and assess engineers and technicians toward CETA and NEBB certification, and sign their competency records. Instruments • Specify, commission and maintain the certification instrument set, including particle counters, aerosol photometers and generators, balometers and flow hoods, thermal and vane anemometers, and micromanometers. Assist in the calibration of similar equipment used by other Eurofins businesses., • Perform troubleshooting, preventative maintenance and repair both in the field and in the lab of various types of laboratory equipment including balances, pH meters, environmental monitoring equipment, hoods, biosafety cabinets, room HEPA filters, plate readers and chambers., • Manage personal parts inventory effectively., • Provide feedback to Director regarding any issue impacting service delivery, particularly issues impacting turnaround times. Commercial and administrative • Provide the technical basis for quotations, including room counts, classification, test scope and frequency., • Represent the business technically to customers during scoping discussions and audits., • Complete administrative paperwork and reports promptly and accurately., • Follow good documentation practices (GDP) as applicable to daily activities., • Contact customers on time and schedule service efficiently., • Adhere to environmental health and safety guidelines., • Effectively communicate with clients and other internal and external parties., • Follow Eurofins work policies and all applicable SOPs. Ensure that training on both remains current., • Maintain client confidentiality, specifically if information about the customer is obtained from sources other than the customer (e.g. complainant, assessors)., • Act impartially within the management system., • Perform other tasks as assigned by Management. Qualifications Requirements • Four-year degree in a related field (e.g., chemistry, analytical chemistry, electronic engineering, or similar) plus 7-10 years’ experience in a related field, preferably as a Field Service Engineer., • SME on providing field service support for clean room certifications, hoods, biosafety cabinets, HEPA filters and other controlled environments., • CETA certification held and in good standing, obtained or renewed within the past five years — CNBT, RCP-CT, or equivalent CETA credential appropriate to the scope of work., • NEBB Cleanroom Performance Testing certification is an advantage, at either Certified Professional or Certified Technician level, held and in good standing. AABC certification will also be considered., • Clear, respectful, and timely verbal and written communication. Proven ability to author protocols, methods, qualification/validation documents and SOP’s., • Experience representing a certification firm during customer quality audits, state board of pharmacy inspections or FDA inspections is preferred., • Demonstrable knowledge of ISO 14644 Parts 1, 2 and 3, and ISO 14644-7 where isolators, RABS and gloveboxes are within scope., • NSF/ANSI 49 for biosafety cabinet and hood calibrations and certifications, • USP <797> and USP <800>, including state board of pharmacy certification and recertification requirements. Where this knowledge is not already held, it must be acquired within the first six months., • Physical ability to lift and transport equipment and perform tasks in various lab environments, • Experience with technical troubleshooting and problem solving, • Must be self-motivated and proactive, • Valid drivers license, • Clean driving record, • Ability to travel within customer territory up to 5 days per week Monday-Friday. Overnight travel as needed. Additional Information Position is full-time, Monday through Friday, 8am-5pm with overtime as needed. Candidates currently living within a commutable distance of North Brunswick, NJ are encouraged to apply. Pay range: $100,000 - $130,000 annually depending on related experience and qualification. Excellent full time benefits including • Comprehensive medical coverage, dental, and vision options, • Life and disability insurance, • 401(k) with company match, • Paid vacation and holidays Eurofins USA BioPharma Services is a Disabled and Veteran Equal Employment Opportunity employer.

Job Description At PEARCE, we've got a career for you! Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit http://www.pearce-services.com. Pearce from CBRE is seeking an Experienced Critical Power Field Technician (UPS Field Service Engineer) to support customers throughout Newark, NJ, and the surrounding region. This position provides preventive maintenance, emergency service, commissioning support, and battery services on UPS systems, DC power systems, battery plants, PDUs, and static transfer switches in mission-critical environments including data centers, telecommunications facilities, healthcare facilities, and industrial sites. Success in this role requires strong electrical troubleshooting skills, sound technical judgment, and the ability to work independently while delivering exceptional customer service. You will be expected to safely diagnose complex power system issues, restore equipment to operational status, and build long-term customer confidence through professionalism and technical expertise. Core Responsibilities: • Perform preventive maintenance, inspections, testing, troubleshooting, and repairs on UPS systems, battery plants, DC power systems, PDUs, STS units, inverters, and related critical power equipment., • Diagnose electrical and control system faults using schematics, test equipment, manufacturer documentation, and industry best practices., • Install, commission, and replace UPS systems, battery strings, battery monitoring systems, maintenance bypass equipment, and associated power infrastructure., • Respond to emergency service calls and restore customer systems to operational status while maintaining the highest safety and quality standards., • Perform battery testing, capacity testing, failure analysis, and lifecycle replacement services., • Complete service reports, maintenance documentation, and customer communications accurately and professionally., • Develop strong customer relationships through technical expertise, responsiveness, and exceptional service delivery., • Mentor junior technicians and support field training efforts by sharing troubleshooting techniques, safety practices, and technical knowledge., • Maintain compliance with OSHA, NFPA 70E, company safety procedures, and customer site requirements., • Support additional field service activities as business and customer needs evolve. Core Experience: • Minimum 3+ years of hands-on experience servicing UPS systems, battery systems, DC power equipment, generators, switchgear, data center infrastructure, or other mission-critical electrical infrastructure., • Experience supporting equipment from manufacturers such as Eaton, Vertiv/Liebert, Schneider Electric/APC, Mitsubishi, Toshiba, ABB, or comparable critical power platforms is strongly preferred., • Strong understanding of AC and DC electrical theory, power distribution systems, and battery technologies., • Ability to read and interpret electrical schematics, wiring diagrams, and technical documentation., • Experience using multimeters, power quality analyzers, battery testing equipment, and other diagnostic tools., • Demonstrated ability to independently troubleshoot and resolve complex electrical and electronic system failures., • Strong customer-facing communication skills with the ability to explain technical findings, recommendations, and corrective actions to both technical and non-technical stakeholders., • Proven commitment to safety, quality workmanship, and professional accountability., • Valid driver's license and willingness to travel within the assigned service territory, including occasional overnight travel as required., • Military veterans with backgrounds in electronics, avionics, communications, radar, power generation, electrical maintenance, nuclear power, or related technical specialties are highly encouraged to apply. Physical/Work Environment: At Pearce, safety is our highest priority. All employees are expected to comply with OSHA, DOT, NFPA 70E, customer site requirements, and company safety policies at all times. • Valid driver's license with an acceptable driving record and the ability to meet company vehicle requirements., • Ability to pass all required pre-employment screenings, including a drug screening and background check, where applicable., • Ability to lift, carry, push, and/or move equipment and materials weighing up to 100 pounds with or without assistance., • Ability to frequently stand, walk, bend, kneel, crouch, reach overhead, and work in confined or restricted-access areas., • Ability to work safely around energized electrical equipment and within mission-critical customer environments., • Ability to perform physically demanding work for extended periods while maintaining attention to detail and safety awareness., • Ability to manage multiple priorities in fast-paced field environments while maintaining the highest standards of safety and quality., • Willingness and ability to travel throughout the assigned service territory, including overnight and multi-day travel as business needs require. Per diem is provided for qualifying travel., • Willingness to participate in an on-call rotation and respond to customer emergencies when required., • Ability to obtain and maintain Security Clearance Access to customer facilities, including data centers, telecommunications sites, healthcare facilities, industrial locations, and government installations. At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range $35—$50 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Learn more about us at www.Pearce-Services.com!

Job Description The HORIBA Group of worldwide companies provides an extensive array of instruments and systems for applications ranging from automotive R&D, process and environmental monitoring, in-vitro medical diagnostics, semiconductor manufacturing and metrology, to a broad range of scientific R&D and QC measurements. Proven quality and trustworthy performance have established widespread confidence in the HORIBA Brand. Inspired by our unique motto, “JOY and FUN,” we focus on social responsibilities by building state-of-the-art products for scientific advancement; especially for protecting health, safety, and the environment. “HORIBARIANs,” the HORIBA employees all over the world, look forward to working with additional creative and entrepreneurial self-starters. To learn more about our unique culture, visit our culture page. We are seeking a highly motivated Software Engineer III with 5+ years of professional software development experience to design, develop, test, and maintain desktop applications and system software in a Windows environment. The ideal candidate will have strong proficiency in C/C++, Qt, and C# .NET, along with experience developing robust, high-performance applications that interface with hardware and external devices. This role will collaborate closely with cross-functional teams including software, hardware, quality assurance, and product management to deliver innovative solutions that meet customer and business requirements. Key Responsibilities • Design, develop, enhance, and maintain software applications using C/C++, Qt, and C# .NET on the Windows platform., • Participate in all phases of the software development lifecycle, including requirements analysis, design, implementation, testing, deployment, and maintenance., • Develop intuitive user interfaces and desktop applications using the Qt framework and Microsoft .NET technologies., • Write clean, maintainable, and well-documented code following established coding standards and best practices., • Troubleshoot, debug, and resolve software defects and performance issues., • Collaborate with hardware and systems engineering teams to integrate software with electronic devices and subsystems., • Develop and maintain software communication interfaces for connected devices and external systems., • Create and execute unit tests and support system-level testing activities., • Participate in design reviews, code reviews, and technical discussions., • Contribute to software architecture decisions and continuous improvement initiatives., • Support released products through issue investigation, troubleshooting, and enhancement activities. Required Qualifications • Bachelor’s degree in Computer Science, Software Engineering, Computer Engineering, or a related technical field., • 5+ years of professional software development experience., • Strong proficiency in:, • C/C++, • Qt Framework, • C# / .NET, • Experience developing software applications in a Windows environment., • Solid understanding of object-oriented design principles and software engineering best practices., • Experience with debugging, performance tuning, and software troubleshooting., • Familiarity with source control systems such as Git, Azure DevOps, or similar tools., • Strong problem-solving, analytical, and communication skills., • Ability to work effectively both independently and within a collaborative team environment. Desired Qualifications • Experience working with electronic hardware devices and embedded systems., • Knowledge of communication protocols including:, • USB, • TCP/IP, • EtherCAT (preferred), • Experience developing software that interfaces with instruments, sensors, or external hardware., • Familiarity with multithreaded programming and inter-process communication., • Experience with automated testing and continuous integration practices., • Understanding of software-hardware integration and troubleshooting techniques. Preferred Competencies • Strong attention to detail and commitment to software quality., • Ability to analyze complex technical problems and deliver practical solutions., • Excellent written and verbal communication skills., • Demonstrated ability to manage multiple priorities in a fast-paced development environment., • Passion for technology and continuous learning. Compensation Package: HORIBA Instruments offers a competitive compensation package that includes a 401(k) plan with match; employee group dental, vision, life, and disability (short and long-term) paid for by the company; medical insurance, family dental and vision insurance, and supplemental life insurance available with reasonable employee contributions; employee assistance program; paid holidays, vacation, and sick time; flexible spending accounts; and educational reimbursement and commuter benefit programs. If you are an individual with a disability and need an accommodation during the application/hiring process, please call (732)494-8660 for assistance. HORIBA will provide reasonable accommodations, upon request, to support individuals with disabilities to be able to participate in the hiring process. HORIBA is committed to making our workplace accessible for individuals with disabilities. EEO/Affirmative Action/Veteran Status/Disabilities.

Job Description Position Overview Harris Energy Solutions, LLC (HES) is a nationwide Energy Consulting Services firm. HES offers a full suite of consulting services, including Building Energy Modeling, Renewable Energy Consulting, Master Planning, Energy Audit, Building Commissioning, Measurement and Verification, and Building Retro-Commissioning. We pride ourselves on the work we perform and the services we provide. HES is hiring an Energy Engineer specializing in Building Commissioning to join our team. The Energy Engineer (Commissioning) will support and execute new construction commissioning (Cx) and retro-commissioning (RCx) projects across a portfolio of commercial, institutional, and multi-family buildings. This role focuses on verifying that building systems are designed, installed, tested, and operated to meet the Owner's Project Requirements and applicable code, certification, and performance criteria. Responsibilities • Develop Commissioning Documentation: Author commissioning plans, Owner's Project Requirements (OPR) summaries, Basis of Design (BOD) reviews, issues logs, and final commissioning reports., • Perform Design and Submittal Reviews: Review drawings, specifications, sequences of operation, and contractor submittals to identify deficiencies, design intent gaps, and commissioning impact items., • Create Pre-Functional and Functional Checklists: Develop equipment-specific Pre-Functional Checklists (PFCs) and Functional Performance Test (FPT) scripts for HVAC, plumbing, electrical, controls, and life safety systems., • Conduct Site Visits and Construction Observation: Perform installation verification site visits, document open issues, and coordinate with general contractors, mechanical/electrical contractors, controls vendors, and TAB agents., • Execute Functional Performance Testing: Lead and witness FPTs of air-side, water-side, BAS, lighting controls, and emergency power systems; verify sequences of operation and proper system response., • Support Retro-Commissioning Studies: Conduct onsite performance testing of existing building systems, identify Retro-Commissioning Measures, and quantify low- and no-cost operational savings., • Develop Systems Manuals and Training: Compile systems manuals and assist with O&M training to support owner handoff., • Support Certification and Compliance: Support LEED Fundamental and Enhanced Commissioning, ASHRAE Guideline 0/1.1/1.5, and project-specific certification requirements. Requirements • Bachelor's in Engineering (Mechanical, Electrical, or Facilities), • 1-3 years of experience in commissioning, MEP design, construction, or energy engineering, including at least one internship, co-op, or full-time role, • Working understanding of HVAC equipment (AHUs, chillers, boilers, VRF, VAV, terminal units), BAS sequences of operation, and basic electrical systems, • Familiarity with construction documents, specifications (CSI MasterFormat), and submittal review, • Exposure to LEED commissioning requirements and/or ASHRAE Guideline 0 preferred, • Comfortable working onsite in active construction environments (PPE required), • Proficient in Microsoft Office and PDF markup tools (Bluebeam, Adobe), • Experience with large commercial and multi-family buildings preferred but not necessary, • EIT, CxA, BCxP, or LEED AP credential preferred (or willingness to obtain), • Travel throughout the United States as required by project workload Personal Qualifications • Strong analytical, writing, and presentation skills, • Passionate about mitigating climate change, • Collaborative and a strong team player, • Self-motivated with the ability to multitask and pay attention to detail, • Ability to work independently and within a team environment, • Enthusiasm to learn and grow as a professional Applicants must be legally authorized to work in the U.S. without the need for current or future employer-sponsored work authorization Job Type: Full-time Pay: $70,000.00 - $82,000.00 per year Benefits • 401(k) (Traditional and Roth options), • 401(k) Safe Harbor, • Medical Insurance, • Dental Insurance, • Vision Insurance, • HSA option, • Paid Time Off, • Paid Holidays, • Profit Share Plan, • Company Covered Disability Insurance (LTD, STD), • Company Covered Life Insurance, • Company Covered Financial Advising Schedule • 8-hour shift, • Hybrid with 3 office days Work Location: Piscataway, NJ & Whitestone, NY (Hybrid - T/W/Th in office) EEO Statement: All qualified applicants will receive consideration for employment without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, or sex.

Job Description The Lab Engineer (Intern) plays a crucial role in advancing ANS's geotechnical engineering initiatives by conducting soil testing within our in-house geotechnical lab. This role primarily encompasses sample preparation, the execution of tests following established standards, and routine workstation maintenance. The intern is expected to play a key role in contributing to the success of our geotechnical projects through attention to detail and adherence to industry-established testing protocols. We are looking for a lab intern ideally graduating by Fall 2025 or Spring 2026. This role offers a hands-on experience in a collaborative lab environment. Candidates who express interest in staying in the geotechnical field and are a strong cultural fit may be considered for a full-time offer after graduation. RESPONSIBILITIES • Sample Preparation: Diligently process and prepare soil and rock samples for testing upon receipt at the laboratory., • Testing: Perform a variety of geotechnical tests in adherence to established ASTM or AASHTO protocols., • Workstation Maintenance: Perform routine maintenance and cleaning procedures including washing reusable laboratory equipment., • Data Recording: Maintain comprehensive documentation of test procedures, observations, and results, prioritizing data accuracy and integrity for subsequent analysis., • Safety Compliance: Commit to adherence to safety protocols and guidelines, actively fostering a secure work environment and minimizing risks related to laboratory operations., • Multi-tasking: Proficient in managing multiple tasks simultaneously., • Non-Testing Duties: Other duties as assigned for day-to-day laboratory operations, including but not limited to packaging and shipping field equipment, ordering and restocking lab supplies, and coordinating the disposal of soilsGENERAL REQUIREMENTS, • Education: Applicants should be pursuing a degree in geology, civil engineering, environmental sciences, materials sciences, or a related field., • Physical Fitness: Refer to the detailed physical requirements outlined below., • In-Person Position: This is an in-person position that requires candidates to be present at the lab for effective contribution. Remote work is not applicable., • Attention to Detail: Strong attention to detail is essential to ensuring precision in sample, • preparation and test procedures., • Safety Awareness: Comprehensive understanding and strict adherence to safety protocols are a must., • Communication: Effective communication skills are needed to facilitate collaboration with team members and record or report findings., • Laboratory Experience: Having prior experience in a laboratory setting, particularly in, • Geotechnical or material testing is advantageous.PHYSICAL REQUIREMENTS, • Prolonged periods (6–8 hours) of walking and standing are applicable for this position., • Regularly lift, move, push, and pull heavy weights (25 to 50 lbs.) throughout the shift. Should be able to handle such tasks independently or with minimal assistance., • Frequent kneeling and squatting INTERNSHIP DURATION The internship is initially set for a four-month period, with the possibility of periodic (multiple) extensions based on the candidate’s performance and overall development. Schedule: 8 hour shift Choose your own hours Monday to Friday Weekends as needed We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Join Our Growing Team CSA provides the ideal place for you to develop or start your career in a fast-paced, diverse environment. At CSA Group, one of our guiding principles is to treat people with respect, and we appreciate diversity in their backgrounds, experiences and opinions. If you think you have what it takes to be an industry leader, send us your resume. Our Success For more than 65 years, CSA Group has contributed to developing stronger, more resilient facility and infrastructure solutions. Our experience brings plenty of opportunities for you to expand your skill set, challenge yourself, and make an impact. Social Commitments One of CSA Group’s most important Guiding Principles is our commitment to contribute to the industries we serve and the communities we live in. This translates into active involvement in a variety of activities and organizations, which provide many opportunities for education and growth for our employees. Responsibilities Priorities can often change in a fast-paced environment like ours, so this role includes, but is not limited to, the following responsibilities: • Support major projects involving the planning, design, and startup of water and wastewater treatment systems with a focus on process, pump stations, large diameter pipelines, biosolids, and odor control systems., • Lead project teams to complete projects to exceed client expectations for approach, scope, budget and schedule., • Demonstrate technical excellence in the performance of project assignments including planning, design and preparation of bid documents, project management, regulatory coordination, and construction services., • Assemble and present written recommendations on technical matters and prepare reports., • Inspect, test and evaluate collection, conveyance, distribution, and treatment systems and processes., • Manage multiple technical assignments while participating in or leading project teams to complete projects to exceed client expectations for approach, scope, budget and schedule., • Develop and maintain client relationships, understanding their current and future needs to ensure expectations are met., • Participate in business development pursuits, identifying opportunities and preparing proposals to meet the office's growth goals. Requirements Essential Skills and Experience: • Bachelor’s Degree in Civil, Environmental, Chemical, or Mechanical Engineering, • 6 or more years of experience in water and wastewater consulting field, • Excellent oral and written communication skills, • Registration as Professional Engineer, • Prior experience in water and wastewater pipeline, pump station, and treatment facility design, rehabilitation, and construction, • Prior experience in process equipment selection, design and startup for pump stations, treatment plants and biosolids processing facilities., • Ability to prepare reports; evaluate pipelines, pump stations and/or treatment plants; and prepare design documents, • Familiar with environmental rules and regulations in the water and wastewater field, • Proficiency with AutoCAD and computer modeling for water systems, open channel flow, and sanitary/storm water systems and other computer applications, • Curiosity and interest in continuous learning in AI and comfort experimenting and iterating quickly; uses data to validate ideas and measure impact., • Commitment to ethical and responsible AI adoption, including privacy-by-design and safe use of tools. Equal Employment Opportunity CSA Group is an Equal Employment Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other status protected by law. \nCompany Description Join Our Growing Team CSA provides the ideal place for you to develop or start your career in a fast-paced, diverse environment. At CSA Group, one of our guiding principles is to treat people with respect, and we appreciate diversity in their backgrounds, experiences and opinions. If you think you have what it takes to be an industry leader, send us your resume. Our Success For more than 65 years, CSA Group has contributed to developing stronger, more resilient facility and infrastructure solutions. Our experience brings plenty of opportunities for you to expand your skill set, challenge yourself, and make an impact. Social Commitments One of CSA Group’s most important Guiding Principles is our commitment to contribute to the industries we serve and the communities we live in. This translates into active involvement in a variety of activities and organizations, which provide many opportunities for education and growth for our employees. Join Our Growing Team\r\n\r\nCSA provides the ideal place for you to develop or start your career in a fast-paced, diverse environment. At CSA Group, one of our guiding principles is to treat people with respect, and we appreciate diversity in their backgrounds, experiences and opinions. If you think you have what it takes to be an industry leader, send us your resume.\r\n\r\n\r\n\r\nOur Success\r\n\r\nFor more than 65 years, CSA Group has contributed to developing stronger, more resilient facility and infrastructure solutions. Our experience brings plenty of opportunities for you to expand your skill set, challenge yourself, and make an impact.\r\n\r\n\r\n\r\nSocial Commitments\r\n\r\nOne of CSA Group’s most important Guiding Principles is our commitment to contribute to the industries we serve and the communities we live in. This translates into active involvement in a variety of activities and organizations, which provide many opportunities for education and growth for our employees.

Job Description The Quality Assurance Engineer II is responsible for conducting complex ongoing analysis of the production process inputs and outputs to ensure that customer quality requirements are being achieved. The Quality Engineer II is expected to: • Maintain SPC limit at or above the corporate target., • Keep customer complaints less than or equal to previous year, • Manage CAR containment and root cause investigation, corrective action plan and completions on time, • Maintain scrap below the maximum percent of sales identified Research & Analysis · Collects production data and applies standard scientific and statistical methods to analyze, document, and diagram production processes. Conducts FMEA, DOE, and SPC analysis · Performs complex data analysis and uses six sigma tools to resolve complex quality issues. · Provides input to the production control systems and designs control activities · Provides input for new product equipment selection, installation and maintenance · Maintains expert level of understanding of GD&T · Leads investigations to determine root cause, development of corrective action plans, verification and effectiveness activities. • Use appropriate statistical techniques to analyze data and make/recommend decisions · Leads projects, teams and complex product transitions. · Provides mentorship and support to team members Customer Support • Develops quality standards and processes related to customer specifications and process improvement, • Communicates with customers, suppliers and other resources to achieve the objectives · Works with customers to understand product specifications and satisfies any quality related issues or concerns. Quality Assurance • Evaluates process stability and capability, • Analyzes processes and procedures to ensure they fit the organization’s quality standards., • Ensures quality processes and procedures comply with internal SOPs, • Assists with regulatory audits, • Performs inspections and sets quality assurance testing models for analysis of raw materials, materials in process, and finished products., • Provides communication to Calibration Technicians of any additions, deletions, or changes to the process gages and equipment, • Writes detailed work instruction-level documents for Quality and related areas. Trains personnel in these instructions and other technical process controls, • Quarantines, documents and evaluates products and materials and generates Material Review Board (MRB) Case(s) as appropriate., • Ensures control plans and associated documentation are implemented effectively and maintained., • Monitors and reports on quality-related key performance indicators, • Ensures compliance and assists with adherence to quality management system · Writes product test procedures and performs IQ/OQ/PQ protocol. This position has no talent management responsibilities. EDUCATION AND EXPERIENCE · Bachelor’s degree in Engineering or a related field is required. · At least 4-7 years of quality experience in a manufacturing environment or equivalent combination of education and experience is required. LICENSE AND CERTIFICATION · ASQ certification is preferred TECHNICAL SKILLS · Blueprint reading and interpretation · Gage design knowledge · APQP · MSA · PPAP · SPC · GD & T · Automated inspection software · Lean · Six Sigma · MS Office Suite OTHER SKILLS · Manual dexterity · Spatial dexterity · Problem solving o Root cause analysis o Corrective Action · Multitasking · Written communication · Verbal communication · Organizational skills · Time Management While performing the duties of this Job, the employee is regularly required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; and talk and hear. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must frequently lift, push, pull, carry and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing this Job, the employee is regularly required to demonstrate manual and spatial dexterity sufficient to operate machinery for precision work While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts and vibration. The employee is frequently exposed to risk of electrical shock. The employee is occasionally exposed to wet and/or humid conditions and odors, dusts, mists, fumes and/or airborne particles. The noise level in the work environment is usually moderate.

Job DescriptionClient: Cognizant US Title: ADMS System Engineer Location: South Plainfield, NJ Full time Only USC and GC Role: The ADMS Technology Engineer plays a critical role in the full technology lifecycle of Advanced Distribution Management Systems. This position is responsible for the design, configuration, development, testing, deployment, and ongoing support of software, hardware, and integrated systems that support grid operations. The ADMS Technology Engineer collaborates closely with Analysts, Product Managers, System Operators, and cross functional technical teams to ensure solutions meet all business, functional, and reliability requirements. The engineer may be assigned to implementation projects or operational support, with responsibilities ranging from building new solution capabilities to maintaining, upgrading, and troubleshooting existing platforms. Key Responsibilities: • Analyze business requirements, operational workflows, and end-user needs to translate them into technical solution designs, system configurations, and implementation plans., • Perform peer reviews of technical designs, implementation plans, configuration settings, code, and deployment artifacts to ensure accuracy, completeness, cybersecurity compliance, and alignment with enterprise standards., • Troubleshoot escalated support issues, conduct root cause analysis, and recommend both short-term workarounds and long-term corrective actions., • Monitor system performance, review operational reports, and ensure ADMS functionality meets defined service levels, reliability expectations, and regulatory or operational standards., • Support deployment activities for new features, subsystems, modules, upgrades, patches, and defect resolutions across development, test, and production environments., • Conduct general system troubleshooting, including log analysis, configuration validation, trace review, and verification of recent changes to isolate and resolve issues., • Document procedures, system configurations, troubleshooting steps, and operational practices to support knowledge transfer and repeatability., • Perform workstation and server patching (Windows and Linux) and maintain environment readiness for project teams, including command line configuration when required., • Interpret and work with technical diagrams and documentation such as network topology diagrams, IP/LAN schemas, firewall configuration sheets, server architecture diagrams, and interface definitions., • Configure workstations, applications, and system components to meet project and operational requirements., • Communicate clearly with operators, project teams, cybersecurity, network teams, vendors, and other stakeholders regarding system status, issues, and deployment activities., • Assist end users with system access issues, configuration questions, and functional requests such as login support, password resets, or new feature needs., • Support application interface testing (e.g., SCADA, OMS, GIS, DMS modules, historian interfaces, ICCP, enterprise data integrations) to ensure data accuracy and availability., • Create and manage operational and analytical reports (e.g., Power BI dashboards) to support operations and decision making., • Work within virtualized environments and tools such as VMware vCenter for provisioning, monitoring, and maintaining system resources. Let me know if you are comfortable with the JD. Powered by JazzHR CPfZIopYR4

Job Description The CNC Programmer is responsible to analyze job orders, drawings, and blueprints to perform all the necessary calculations and programming to create products per customer specifications. The CNC Programmer is expected to: • Program, test, run and revise machine programming to meet customer specifications., • Set up machine with correct tooling to build product precisely and efficiently CNC Programming 50% · Writes programs from blueprints and/or solid models for the CNC machines with Swiss turning machine programming · Loads electronic files onto the machine. · Studies and interprets drawings, manuals, specifications or sample parts to determine dimensions and tolerances of finished work pieces, sequence of operations, and set-up requirements to maximize efficiencies. · Creates set-up sheets based on tooling selection criteria. · Monitors and verifies the accuracy of each job’s initial set-up and outcome. · Responsible for the machine performance and product outcome of assigned projects. · Revises programs and documents based on engineering changes. · Maintains library of programs. · Sets up and operates machine on a trial run to verify accuracy of machine settings or programmed control data. · Performs first piece inspection once setup is completed. Gives first piece to Quality Inspector and waits for Quality approval to continue. Quality Control 30% · Monitors machine operations to detect out of tolerance machining · Takes corrective action to bring units into specification. Red tags units that are out of specification (OOS), reports OOS to quality personnel and supervisor. · Coordinates with Quality department to ensure parts comply with specifications. · Communicates with supervisor, engineers, quality and other shop personnel for assignments and to resolve machine or quality issues. · Demonstrates ability to streamline processes to increase productivity and quality; production and prototype jobs are setup consistently, timely and accurately. Process Management 20% · Works for continuous process improvements and machine time reductions reporting program changes to Supervisor and /or Manufacturing Engineer. · Keeps CNC operators abreast of daily machine performance and project updates. · Assists in solving plant operating problems and/or cost reductions projects. This position has no talent management responsibilities. EDUCATION AND EXPERIENCE · Associate's degree or equivalent from two-year college or technical school in computer numerically controlled programming, machine tool programing, or a related field is required · 4-7 years of CNC programming experience is required. CNC programming experience in a manufacturing or production environment strongly preferred. · Proficient in writing programs from blueprints and/or solid models for the CNC swiss turning machines · 1-3 years of CAM programming experience is required. LICENSE AND CERTIFICATION · None TECHNICAL SKILLS · CAM programming · GD&T · G-code · AutoCAD Design software · ERP software · CNC equipment, 5-axis, Live tool lathe etc. · Citizen CNC and PartMaker · Blueprint reading · Measuring equipment o calipers o ID / OD micrometers o depth gauges o indicators · MS Office Suite OTHER SKILLS · Mechanical aptitude · Set-up, operation and programming of machines · ISO 13485 · FDA 21CFR820 While performing the duties of this Job, the employee is regularly required to sit; use hands to handle or feel; reach with hands and arms; climb or balance and stoop, kneel, crouch, or crawl. The employee is frequently required to stand; walk; and talk and hear. The employee must frequently lift, push, pull, carry and/or move to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts and vibration. The employee is frequently exposed to risk of electrical shock and odors, dusts, mists, fumes and/or airborne particles. . The employee is occasionally exposed to wet and/or humid conditions. The noise level in the work environment is usually loud.

Job DescriptionDescription: Azure Cloud Infrastructure Engineer Location Hybrid / Remote (US) Role Overview We are looking for a Cloud Infrastructure & DevOps Engineer to help build, operate, and continuously improve the cloud platforms supporting SaleDock and Celerant retail systems. This role is responsible for managing Azure infrastructure, improving reliability, and developing automation that streamlines provisioning and deployment processes for new ecommerce customers. You will work closely with development and support teams to ensure our production and test environments are secure, scalable, and operationally efficient. Key Responsibilities Cloud Infrastructure & Operations • Build, manage, and maintain Azure cloud infrastructure supporting ecommerce and retail operations., • Administer production and test environments across Linux (and Windows where required)., • Monitor performance, capacity, uptime, and resource consumption across hosted applications., • Create and maintain dashboards and monitoring views to proactively identify issues., • Ensure high availability and reliability across customer-facing services. Automation & Deployment • Develop and maintain automation for provisioning, configuration, testing, and deployment., • Maintain CI/CD pipelines for ecommerce environments, including creating pipelines for new customer sites., • Improve and automate manual go-live processes for onboarding new ecommerce customers, including:, • Provisioning web applications, • Configuring custom domains and SSL validation, • Deploying environment-specific infrastructure and pipelines Support Tooling & Reliability • Develop internal tooling that enables support teams to monitor, restart, and manage endpoints/services., • Assist with incident response, troubleshooting, and root cause analysis., • Participate in an on-call or out-of-hours escalation rota (if required) to support uptime expectations. Security & Best Practices • Apply operational security best practices across the Azure environment., • Implement hardening, access controls, patching processes, and secure networking., • Ensure infrastructure is compliant with internal standards and industry best practice. Required Skills & Experience • Strong experience managing cloud infrastructure in Microsoft Azure., • Experience with Infrastructure as Code (Terraform, Bicep, ARM, etc.)., • Strong CI/CD pipeline experience (Azure DevOps, GitHub Actions, etc.)., • Experience supporting production workloads and diagnosing performance issues., • Solid understanding of networking concepts (VNets, subnets, routing, firewalls, DNS)., • Comfortable working with Linux administration (and Windows Server where relevant)., • Scripting / automation skills (PowerShell, Bash, Python, etc.)., • Familiarity with monitoring tools (Azure Monitor, Application Insights, Grafana, etc.). Nice to Have • Experience running multi-tenant ecommerce or SaaS platforms., • Experience with scaling strategies, load balancing, and resilience planning., • Understanding of security frameworks and governance in Azure (Defender, Policy, RBAC best practices)., • Experience building internal support tooling or operational dashboards. What Success Looks Like • Production and Test infrastructure with high uptime, security, and incident handling, • Faster and more automated ecommerce customer go-live processes., • Improved monitoring and visualization tooling, • Improved reliability and visibility of production systems., • Clear monitoring dashboards and proactive alerting in place.Requirements: Required Skills & Experience • Strong experience managing cloud infrastructure in Microsoft Azure., • Experience with Infrastructure as Code (Terraform, Bicep, ARM, etc.)., • Strong CI/CD pipeline experience (Azure DevOps, GitHub Actions, etc.)., • Experience supporting production workloads and diagnosing performance issues., • Solid understanding of networking concepts (VNets, subnets, routing, firewalls, DNS)., • Comfortable working with Linux administration (and Windows Server where relevant)., • Scripting / automation skills (PowerShell, Bash, Python, etc.)., • Familiarity with monitoring tools (Azure Monitor, Application Insights, Grafana, etc.).

Job DescriptionThe Role: Director of Building Envelope Location: Warren, NJ SUMMARY We are seeking a motivated Director of Building Envelope Project Engineer with a strong interest in investigation, repair, and rehabilitation of existing buildings. The position focuses on roofing, façade, structural, and balcony/deck rehabilitation projects, primarily within the multifamily sector. The engineer will provide technical evaluations, structural & envelope assessments, design support, and construction-phase engineering oversight. Depending on experience, candidates may assist in investigation, design development, structural/envelope detailing, report writing, and construction administration. Estimated salary range for this position is $135,000 to $180,000. The salary listed is an estimate and not guaranteed. The salary offered will vary based on experience, education, skills, abilities, and certifications/license if applicable Primary Responsibilities General Engineering / Project Support • Perform engineering evaluations of building envelope and structural systems, including roofs, façade components, balconies, decks, and related structural elements., • Prepare technical reports summarizing existing conditions and recommended repair strategies., • Assist with development of repair drawings, details, and specifications, with oversight from senior engineers., • Prepare written correspondence to clients, contractors, and code officials., • Manage and maintain organized technical records, drawings, test data, field photos, and project documentation., • Review project scopes, budgets, and schedules with supervising engineers to ensure deliverables are met., • Assist in construction administration activities—including reviewing RFIs, submittals, change orders, and contractor payment applications.Participate in internal QA/QC reviews to ensure accuracy and technical completeness., • Review contractor submittals, change orders, schedules, and payment applications as directed., • Assist in troubleshooting construction issues with contractors based on engineering judgment Field Responsibilities • Conduct on-site engineering evaluations of roofs, façades, balconies, decks, structural framing, waterproofing systems, and building envelope components., • Perform field testing and documentation (moisture testing, probes, level checks, structural observations, etc.)., • Prepare detailed field sketches, measurements, and photographic documentation., • Observe repair work in progress to verify compliance with drawings, specifications, and industry standards., • Communicate observed deficiencies and corrective recommendations to senior engineers and project managers., • Work on multiple field projects involving roofing, cladding, waterproofing, decks, balconies, and structural rehabilitation. Client Relations & Business Development • Attend client meetings with senior personnel, document meeting minutes and follow-up items., • Participate in discussions on scope, budget, and technical approach., • Represent The Falcon Group at technical seminars, networking events, continuing education sessions, and industry meetings. Supervisory Responsibilities This position currently has supervisory duties but may evolve based on growth and performance. Qualifications Licenses & Certifications • A Professional Engineering (PE) or a Registered Architect (RA) is needed., • Building envelope certifications (IIBEC: RRO, RRC, RWC) or ICC certifications are a plus., • OSHA-10 preferred., • Valid United States Driver’s License required, as this position requires travel to and from client sites.Experience, • Minimum of 10 years of experience with an engineering consulting firm, building envelope firm, structural engineering practice, or construction industry performing structural/envelope-related work. Education • Bachelor’s degree in Civil Engineering, Structural Engineering, Architectural Engineering, or related field., • Master’s degree is a plus but not required. Skills & Additional Requirements • Understanding of construction plans, technical specifications, and industry standards., • Ability to identify typical structural defects, building envelope failures, moisture intrusion mechanisms, and waterproofing deficiencies., • Strong technical writing skills and attention to detail., • Ability to manage multiple projects concurrently and meet deadlines., • Knowledge of building codes, including IBC, IRC, and structural standards., • Professional, organized, and capable of fieldwork including ladders, attics, roofs, and difficult access areas., • Ability to work independently and collaboratively with engineers, architects, and construction professionals., • Familiarity with AutoCAD or similar drafting software is a plus., • Familiarity with CSI MasterSpec or technical specification writing preferred.Physical Demands, • Ability to lift up to 40 lbs., • Comfortable using ladders, lifts, scaffolds, and roof access equipment., • Ability to perform site work in extreme temperatures, humidity, and adverse weather., • Ability to work at heights up to 10 stories and in confined spaces (attics, crawlspaces)., • Significant standing/walking on uneven or challenging terrain.Who We Are At The Falcon Group, our mission is to deliver exceptional service across a broad range of industries, including multifamily, industrial, commercial, retail, hospitality, healthcare, and forensic/litigation support. Built on decades of experience, we provide a full spectrum of services, from architectural design to civil, structural, mechanical, electrical, and plumbing engineering, as well as construction administration and forensic assessments. This integrated approach allows us to deliver comprehensive, cost-conscious solutions to our clients’ most complex challenges. With a growing presence in key markets and multiple regional offices, we’re expanding rapidly and always looking for talented professionals to join our team. Guided by collaboration, innovation, and integrity, The Falcon Group provides the environment and support to help you thrive personally and professionally EMPLOYEE BENEFITS We offer competitive salaries, professional work environments and a comprehensive benefits package. Benefits include Group Medical, Dental and Vision, 401k with employer match, Supplemental Life Insurance, AD&D, Legal Plan, Pet Insurance, Critical Illness, Hospital Indemnity and Accident Plans, Paid Holidays, Vacation, Sick time, Cell Phone Reimbursement and Continuing Education Powered by JazzHR 3zS2GNNw0S

About Wakefern Wakefern Food Corp. is the largest retailer-owned cooperative in the United States and supports its co-operative members' retail operations, trading under the ShopRite, Price Rite Marketplace, The Fresh Grocer, Dearborn Market, Gourmet Garage, Fairway Market, and Morton Williams banners in New Jersey, New York, Connecticut, Pennsylvania, Maryland, Delaware, Massachusetts, New Hampshire and Rhode Island. Employing an innovative approach to wholesale business services, Wakefern focuses on helping the independent retailer compete in a big business world. Providing the tools entrepreneurs need to stay a step ahead of the competition, Wakefern’s co-operative members benefit from the company’s extensive portfolio of services, including innovative technology, private label development, and best-in-class procurement practices. Role Overview: We are seeking a hands-on application engineer with experience in warehouse management and supply chain systems. This role will translate operational business problems into reliable, scalable applications and integrations using Node.js, Java, Python, and related technologies. The engineer will independently lead work from discovery and solution design through development, testing, deployment, support, and continuous improvement. Applied AI will be a significant part of the role, including evaluating use cases, building AI-enabled capabilities, automating workflows, and validating outputs for operational use. Key Responsibilities: • Partner with warehouse, distribution, and supply chain teams to understand operational challenges and translate them into technical requirements and solution designs., • Design, develop, test, deploy, and support applications, services, APIs, integrations, and automation using Node.js, Java, Python, SQL, and appropriate cloud technologies., • Own technical solutions through the full software development lifecycle, including architecture, coding, code review, testing, release readiness, documentation, monitoring, and production support., • Build and enhance integrations among WMS, ERP, order management, transportation, inventory, automation, and other supply chain platforms., • Identify manual steps, bottlenecks, recurring defects, and performance constraints; implement solutions that improve throughput, accuracy, reliability, and maintainability., • Evaluate and apply AI capabilities to practical business problems, such as exception analysis, operational decision support, workflow automation, knowledge retrieval, and developer productivity., • Establish appropriate controls for AI-enabled solutions, including data quality, output validation, security, privacy, traceability, and human review., • Troubleshoot complex production issues across applications, interfaces, databases, and operational workflows; perform root-cause analysis and implement durable fixes., • Collaborate with engineering, product, infrastructure, security, vendors, and business stakeholders while remaining comfortable driving assignments independently., • Create clear technical documentation, including architecture decisions, interface specifications, support procedures, test evidence, and implementation plans. Required Qualifications: • 8+ years of experience designing, developing, implementing, or supporting business-critical applications in warehouse, distribution, logistics, inventory, or broader supply chain environments., • Hands-on software development experience with at least two of the following: Node.js/JavaScript or TypeScript, Java, and Python., • Strong SQL and relational database skills, including data analysis, query optimization, data modeling, and production troubleshooting., • Experience designing or consuming REST APIs, event-driven interfaces, file-based integrations, and batch or real-time processing patterns., • Working knowledge of WMS processes such as receiving, putaway, replenishment, inventory control, picking, packing, shipping, labor, and exception management., • Practical understanding of AI concepts and tools, including generative AI, prompt design, retrieval-based solutions, model limitations, output evaluation, and responsible use., • Demonstrated ability to decompose ambiguous business problems, evaluate alternatives, make sound technical decisions, and deliver maintainable solutions with limited oversight., • Strong analytical, debugging, and root-cause analysis skills across application, integration, and data layers., • Self-starter who takes ownership, learns unfamiliar technologies and business processes quickly, communicates clearly, and collaborates effectively across technical and operational teams. Preferred Qualifications: • Experience with DB2 or other enterprise database platforms used in high-volume operational environments., • Experience modernizing legacy applications or integrating technologies such as JCL, flat files, copybooks, COBOL, SUPRA, or mainframe workflows., • Experience with cloud platforms, containerized services, CI/CD pipelines, automated testing, observability, or DevOps practices., • Hands-on experience building AI-enabled applications, retrieval-based solutions, intelligent automation, or operational decision-support tools., • Experience integrating WMS with ERP, order management, transportation, inventory, material-handling automation, or other supply chain platforms. Wakefern is proud to offer a comprehensive benefits package designed to support the health, well-being, and professional development of our Associates. Benefits include medical, dental, and vision coverage, life and disability insurance, a 401(k) retirement plan with company match & annual company contribution, paid time off, holidays, and parental leave. Associates also enjoy access to wellness and family support programs, fitness reimbursement, educational and training opportunities through our corporate university, and a collaborative, team-oriented work environment. Many of these benefits are fully or partially funded by the company, with some subject to eligibility requirements.

Job Description Job Title: Electrical Engineer Power Electronics Job Description This role leads the conceptual and detailed design of advanced power conversion products for aerospace and defense applications, with a strong focus on power electronics, motor control, and switched-mode power supplies. You will own the full engineering lifecycle from topology selection and detailed circuit design through qualification, transition to manufacturing, and sustaining support for fielded products. You will also guide a small team of engineers, drive continuous improvement in engineering processes, and contribute to technical proposals for new business. Responsibilities • Lead conceptual and detailed design of new power conversion products, including topology trade studies, magnetics design, worst case circuit analysis (WCCA), component derating, and thermal, shock, and vibration analyses., • Design and develop power electronics circuits such as motor drives and switched-mode power supplies using MOSFET, IGBT, SiC, and GaN devices, including gate drive, PWM control, buck, boost, inverter, and DC-DC converter topologies., • Approve qualification test plans, test procedures, and test reports, ensuring that all designs meet performance, reliability, and compliance requirements., • Own the engineering-to-manufacturing transition for new designs, ensuring Design for Excellence (DFX) principles, including Design for Manufacturing (DFM) and Design for Test (DFT), are incorporated before production release., • Lead root cause and corrective action (RCCA) activities for test failures and field returns using structured methods such as fishbone (Ishikawa) analysis and fault tree analysis (FTA), and drive corrective actions to verified closure., • Recommend and implement product improvements for existing designs based on test results, field data, and customer feedback., • Develop, implement, and continuously improve engineering processes, standards, and procedures to enhance engineering quality, efficiency, and product development execution., • Own sustaining engineering activities, including response to field issues, engineering support for in-production units, component obsolescence management, drawing revisions, and derivative design work., • Balance sustaining engineering workload against new product development commitments to ensure both are delivered on schedule., • Personally manage select small projects and internal engineering initiatives end-to-end, including defining scope, building schedules, planning resources, tracking milestones, and communicating with stakeholders where dedicated program management is not assigned., • Lead development of the technical content of proposals and responses to requests for proposals (RFPs), including system descriptions, requirements compliance matrices, qualification approaches, technical risk discussions, work estimates, and bases of estimate., • Collaborate closely with cross-functional teams, including other electrical engineers and mechanical engineers, to integrate power conversion products into complete systems., • Mentor and guide junior engineers, providing technical direction, design reviews, and support in developing their skills in power electronics and system design., • Support the integration of software-based command and control systems into inverter and converter designs, including active power factor correction front ends, selectable output configurations, multiple-unit smart sharing systems, and data bus communications such as CAN and ARINC 429., • Contribute to the development and support of energy storage products, including lithium-ion battery and charger systems for aerospace and defense applications. Essential Skills • Bachelors degree in Electrical Engineering., • 6+ years of power electronic design experience., • Strong experience with power electronics, including switched-mode power supplies, motor control, and power conversion., • Proficiency with schematic design for power electronic circuits and systems., • Hands-on experience with MOSFET, IGBT, SiC, and GaN devices, including gate drive design and PWM control., • Knowledge of buck, boost, inverter, and DC-DC converter topologies and switching frequency considerations., • Experience with transformer and magnetics design for power conversion applications., • Ability to perform worst case circuit analysis (WCCA), component derating, and thermal, shock, and vibration analyses., • Experience applying Design for Excellence (DFX) principles, including Design for Manufacturing (DFM) and Design for Test (DFT)., • Demonstrated ability to lead projects and manage engineering activities from concept through production release., • Experience conducting root cause and corrective action (RCCA) using structured techniques such as fishbone (Ishikawa) analysis and fault tree analysis (FTA)., • Strong analog design and power conversion experience, • Ability to mentor junior engineers and provide technical leadership., • Strong written and verbal communication skills for technical documentation, reports, and proposal content.Job Type & Location This is a Contract to Hire position based out of Edison, NJ. Pay and Benefits The pay range for this position is $76.00 - $80.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Edison,NJ. Application Deadline This position is anticipated to close on Oct 16, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications withoutregard to race, sex, age, color, religion, national origin, veteran status, disability,sexual orientation, gender identity, genetic information or any characteristic protectedby law. If you would like to request a reasonable accommodation, such as the modification oradjustment of the job application process or interviewing process due to a disability,please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance:Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in thecity and county of San Francisco, we will consider for employment qualified applicantswith arrest and conviction records. Massachusetts Lie Detector:It is unlawful in Massachusetts to require or administer a lie detector test as acondition of employment or continued employment. An employer who violates this lawshall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI):We may use Artificial Intelligence (AI) to support parts of our hiring process,including sourcing, screening, and evaluating candidates. AI helps assess applicationsand qualifications, but final decisions are made by our hiring team. By applying, youacknowledge and agree that your application may be reviewed using AI tools.

Growing Engineering Firm | Great Compensation Package | Upwards Career Growth! This Jobot Job is hosted by: Lauren Lehman Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $75,000 - $100,000 per year A bit about us: We are working with a growing engineering firm who is searching for a Civil Land Engineer. This position will develop conceptual and detailed design plans using Civil 3D that ensure functionality and performance for the client’s project requirements aimed at assuring project quality and accuracy of construction deliverables. Position must have sufficient ability to interact, build rapport and communicate clearly with clients, municipalities and fellow employees. This position requires sufficient proficiency, knowledge and understanding of all job responsibilities while completing multiple tasks on time. Apply today to learn more! Why join us? • Upwards Growth!, • Excellent Benefits!, • Great Compensation Package!, • Must be fine with 10 - 20% travel Job Details Responsibilities: 1. Manage and lead land development projects including residential, commercial, and industrial site development., 2. Review potential land development sites and perform feasibility studies, including site visits., 3. Prepare and present detailed reports on the feasibility, environmental impact, cost, and timelines of projects., 4. Design infrastructure components for projects, including grading, storm water management, sanitary sewer, and water distribution systems., 5. Coordinate with architects, contractors, and other engineering disciplines to ensure project goals are met., 6. Apply for and secure necessary permits and licenses for projects., 7. Conduct soil testing to determine the adequacy and strength of foundations., 8. Test building materials, such as concrete, asphalt, or steel, for use in particular projects., 9. Provide cost estimates for materials, equipment, or labor to determine a project’s economic feasibility., 10. Use design software to plan and design transportation systems, hydraulic systems, and structures in line with industry and government standards., 11. Perform or oversee surveying operations to establish building locations, site layouts, reference points, grades, and elevations to guide construction. Qualifications: 1. Bachelor’s degree in Civil Engineering or a related field., 2. A minimum of 5 years of experience in civil engineering with a focus on land development., 3. Professional Engineer (PE) license is highly desirable., 4. Proficient in the use of design software such as AutoCAD, Civil 3D, and other related software., 5. Extensive knowledge of construction materials, engineering practices, and mathematics., 6. Strong project management skills with the ability to lead and manage multiple projects simultaneously., 7. Excellent communication and interpersonal skills, with the ability to present complex information clearly and concisely., 8. Strong problem-solving skills, with the ability to anticipate and mitigate potential issues before they arise., 9. Familiarity with local, state, and federal land use laws and regulations., 10. Ability to work effectively in a team environment and collaborate with a diverse range of professionals., 11. Physical stamina and ability to work on construction sites under varying weather conditions., 12. Valid driver’s license and willingness to travel as needed for site visits and client meetings. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description About Bell and Howell Bell and Howell delivers technology-driven Automation Services and Automation Solutions that help businesses optimize performance, reduce downtime, and improve customer experiences. Our Automation Services bring a dedicated team of expert mechatronic service engineers completely covering North America and backed by our Integrated 360™ advanced technology enabling remote repair, diagnostics, automated SmartOps Dispatch™ and 24/7/365 technical assistance for our clients. We provide a comprehensive and certified level of support for thousands of diversified clients. Our Automated Solutions product portfolio consists of next-generation equipment delivering best-in-class performance enhancing workflow efficiency and elevating customer experiences across multiple markets including retail, pharmaceuticals, packaging, mail production, ecommerce and manufacturing – all backed by the best service in the industry. Location: Piscataway, New Jersey Shift: 2nd Pay: 25-30/hr. Summary: The Customer Service Engineer serves as primary customer contact on technical and service-related problems on a wide range of industrial, robotic and printing equipment. Diagnoses electronic, mechanical, software and system failures, using established procedures provided by our highly rated service training department. This job may include any aspect of field support, including electrical/electronics, hardware, software, PC’s, and networking. Provides technical support to customers on operational or maintenance aspects of system equipment. Determines most cost-effective repair/resolution to minimize customer downtime. Note: This is not an IT role. The position requires hands-on electrical and mechanical troubleshooting with experience using Digital Multi Meter (DMM) and more. Job Responsibilities: • Primary responsibility will be to install, troubleshoot and repair a variety of industrial products that include, but are not limited to; printing and packaging equipment, cash recycling products, inserting and sorting machines, credit card attaching and processing systems, robotics and any other applicable third-party accessories attached as part of the system., • Schedule and perform regular predictive/preventive maintenance inspections on equipment., • Provide support by managing parts inventory, customer service calls and preventative maintenance schedules., • Foster positive customer relations and a high degree of customer satisfaction by communicating effectively with customers., • Act as a liaison between the customer and other departments/functions of the company., • May need to provide an “on call” level of service up to seven (7) day/week twenty-four (24) hour/day for emergency customer assistance; respond to emergency and non-scheduled calls for service within established response time goals. Supervisory Responsibilities: N/A Competencies (Skills, Knowledge and Abilities): • Requires understanding of computer program functionality and software troubleshooting skills., • Strong interpersonal/customer relation skills., • Ability to build and maintain strong customer relationships by understanding their operations and instilling confidence with effective proactive communication., • Ability to effectively resolve conflict internally and externally., • Ability to accomplish the describe duties through appropriate hand, power, and testing tools/equipment., • Ability to reason logically and make sound decisions along with considering alternative and diverse perspectives., • Strong analytical, problem-solving, quantitative, and time management skills., • Ability to communicate effectively both orally and in writing., • Ability to understand, remember and follow verbal and written instructions., • Ability to work as an integral part of a team., • Ability to read and understand written procedures and diagrams for assembly and test., • Ability to develop and implement solutions to assembly problem., • Ability to maintain regular attendance and be punctual. Education and Experience: • High School degree or equivalent with 2-year degree or diploma in electronics/advanced mechanics/software training with 1+ years related industry/equipment experience, or equivalent combination of education and experience., • Requires strong electronics and mechanical background, understanding of computer program functionality and software troubleshooting skills, • Associate degree preferred. Travel: This position requires minimal travel in the United States and Canada for training and other requirements. For field only, local travel time could be greater than 50%. Physical Requirements: • Ability to use standard and specialized hand, power and diagnostic tools and measuring equipment, such as oscilloscopes, DMM, gauges, etc., • Requires lifting to waist seventy (70) pounds., • Requires walking and standing; using hands to feel objects; reaching; and requires balance., • Requires bending, stooping, kneeling, crouching and/or crawling for periods of time., • Ability to work in a loud environment., • Ability to work in small, cramped areas., • Ability to work in elevated environment up to twenty (20) feet., • Work is performed in a controlled office, retail, and manufacturing environment; noise within acceptable safety levels; paper dust prevalent; cleaners and solvents used to clean machines; machines contain moving parts. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Bell and Howell is an Equal Opportunity Employer. It is company policy to administer employment based solely on an individual’s qualifications, ability and performance without regard to race, color, religion, gender identity, sex (including pregnancy, lactation, childbirth or related medical conditions), sexual orientation, age, national origin or ancestry, physical or mental disability, genetic information (including testing and characteristics), veteran status, uniformed servicemember status, marital status, or any other characteristic protected by federal, state or local law.