Trabajos performance test engineer en Commack, New YorkCrear alertas

FlexStaff is seeking a Senior Quality Engineer to join our client's team, a registered ISO 9001 company that designs and manufactures products for the military and aerospace industry. This position is permanent, full-time, onsite at their Deer Park location. The Senior Quality Engineer is responsible for implementing and executing inspection, testing, and evaluation methods to ensure that products meet or exceed company and customer quality standards. This role involves collaborating with internal teams, suppliers, and customers to maintain consistent product quality, drive continuous improvement, and promote a culture of quality throughout the organization. Quality Engineering Responsibilities: • Participate in root cause analysis of product or process failures., • Respond to, implement, and follow up on corrective actions for internal, supplier, and customer issues., • Schedule and prepare Material Review Board (MRB) meetings; track corrective actions and MRB outcomes., • Collect, organize, monitor, and distribute supplier quality and delivery performance data., • Ensure procedures and work instructions are documented in compliance with corporate and ISO standards., • Evaluate potential new suppliers through audits or self-assessment and oversee supplier qualification processes., • Support supplier evaluation programs to ensure key characteristics and in-process controls are well-defined and effective., • Assist with inspection processes and ensure purchased products are designed for manufacturability., • Clearly define product quality requirements and identify key characteristics for First Article Inspection (FAI)., • Prepare and review FAI and EIDP reports; improve supplier engagement in the FAI process to support product revisions and new product launches., • Maintain environmental lab testing equipment and perform environmental tests according to customer or engineering requirements., • Prepare and schedule test plans; provide recommendations, specifications, and data requirements., • Assist with environmental testing conducted by independent testing laboratories., • Perform internal audits and support the development and monitoring of key performance indicators (KPIs) for departments., • Operate and program measuring equipment, including CMMs, Zygo Interferometers, Spectrometers, and other precision instruments., • Conduct internal training sessions to ensure employees are familiar with quality procedures and best practices., • Perform basic incoming, in-process, and final inspections as needed. General Quality Responsibilities: • Support and promote a culture of quality throughout the organization., • Help ensure that company quality goals and compliance requirements are met., • Understand customer specifications and assist in meeting their requirements., • Maintain awareness of ISO 9001 standards and help ensure compliance., • Assist in developing and maintaining clear quality procedures and documentation., • Monitor and report on quality performance using data and inspection results., • Support continuous improvement efforts by identifying issues and recommending corrective actions., • Provide input for training needs related to quality processes. Additional Quality Support Tasks: • Assist with maintaining environmental lab equipment and testing processes., • Coordinate with independent labs for environmental testing as required., • Review inspection reports and support investigations on nonconforming products., • Support MRB (Material Review Board) processes., • Participate in contract reviews to address quality-related items., • Review customer specifications and communicate requirements to the team., • Assist with DMR (Discrepant Material Reports) and RMA (Return Material Authorization) evaluations., • Perform final, in-process, and source inspections of assemblies., • Assist with root cause investigations and failure analysis., • Support incoming, in-process, and final inspections as needed. Qualifications: • Bachelor’s degree in Engineering, Quality, or a related field preferred., • Experience with supplier quality management, audits, FAI processes, and ISO standards., • Proficiency with precision measurement tools and equipment (CMM, interferometers, spectrometers, etc.)., • Strong analytical, problem-solving, and communication skills., • Ability to manage multiple projects and work collaboratively across departments.

Since 1969, Sensitron Semiconductor has been a manufacturer of discrete semiconductors and microelectronics for aerospace, defense, medical, and other high reliability markets, and applications. Our long-term success can be attributed to the talent, creativity, and dedication of our employees. Sensitron strives to create an environment in which all employees can reach their full potential and recognize their contribution to the growth of our company. Your journey to success starts here! About the Role Sensitron Semiconductor is seeking a motivated and detail-oriented Electrical Engineer (Mid-Level) to join our engineering team. This mid-level position is ideal for an engineer who enjoys working across the full product lifecycle-from concept and design through validation and production-while contributing to high-reliability power electronics solutions used in demanding environments such as aerospace, defense, and industrial systems. Key Responsibilities • Design, develop, and test analog and power electronic circuits, including AC-DC and DC-DC conversion systems, • Perform component selection, schematic capture, and support PCB layout activities with attention to EMI, thermal performance, and reliability, • Conduct circuit simulation (e.g., SPICE-based tools) and analyze performance under varying electrical and environmental conditions, • Develop and execute validation and qualification test plans, including worst-case analysis and derating, • Troubleshoot hardware issues at the board and system level, including root cause analysis and corrective action implementation, • Collaborate with cross-functional teams including mechanical engineering, manufacturing, and quality assurance, • Support transition from prototype to production, including documentation, test procedures, and manufacturing support, • Participate in design reviews and contribute to continuous improvement of engineering processes, • Interface with customers for product deploymentRequired Qualifications, • Bachelor's degree in Electrical Engineering or related field, • 3-7 years of relevant industry experience, • Strong foundation in analog circuit design and power electronics, • Experience with schematic capture and PCB layout tools (e.g., Altium or similar), • Familiarity with lab equipment such as oscilloscopes, spectrum analyzers, and power analyzers, • Working knowledge of EMI/EMC principles and mitigation techniques, • Ability to debug circuits and systems methodically, • Strong written and verbal communication skillsPreferred Qualifications, • Experience designing for high-reliability applications (e.g., aerospace, military, or medical), • Familiarity with industry standards such as MIL-STD or IPC guidelines, • Experience with thermal analysis and magnetic component selection, • Exposure to digital control of power converters (e.g., microcontrollers or DSPs), • Understanding of isolation techniques and high-voltage design considerations, • Experience developing embedded firmware and/or PC-based tools (e.g., C/C++, Python, or C#), including simple GUI applications for test, control, or data visualizationWhat We Offer, • Competitive salary and bonuses, • Comprehensive health, dental, and vision insurance, • 401(k) with company match, • Generous paid time off and holidays, • Opportunity to work on cutting-edge, mission-critical technologies, • Collaborative in a technically driven work environmentWhy Sensitron Semiconductor? At Sensitron, you'll be part of a team that designs and manufactures innovative semiconductor and power solutions that operate where failure is not an option. We value practical engineering expertise, creative problem-solving, and a commitment to quality.Apply today to help power the systems that power the world. • This position requires access to technology, material, software or hardware that is controlled by export laws of the US. In order to be eligible, you must be either a US citizen or permanent resident., • Sensitron is an equal opportunity employer offering an attractive medical/dental and 401k benefits package., • Veterans are encouraged to apply. The salary range and/or hourly rate listed is a good faith determination of potential base compensation that may be offered to a successful applicant for this position at the time of this job advertisement and may be modified in the future. When determining a team member's base salary and/or rate, several factors may be considered as applicable (e.g., location, specialty, service line, years of relevant experience, education, credentials, budget and internal equity).

Job Description Join North Wind – Accelerating Hypersonic Innovation At North Wind, we are advancing hypersonic technologies through cutting-edge research, system development, and flight testing. Our team drives innovation in high-speed aerodynamics, propulsion systems, and mission-critical components, supporting every phase of hypersonic programs—from R&D to flight testing. If you are passionate about pushing technological boundaries in a dynamic environment, we invite you to join us. The Lead Engineer – Digital Integrated Systems is a key technical leadership position that reports to the Office of the Chief Engineer and drives the technical execution of the company’s digital engineering (DE) vision for current and future projects. Experienced in architecting, designing, and integrating digital engineering hardware and software platforms for multi-domain, complex systems. A practitioner of digital engineering tools and model-based approaches who will help guide the company’s digital transformation. Skilled communicator who can operate as an individual contributor and a leader while distilling the value proposition of digital engineering and building company-wide interest in adoption of new digitally integrated approaches and processes. Responsibilities: Digital Engineering Platform Development: Leads the architecture development, design, build, integration, and deployment of a digital engineering hardware and software platform for a new wind tunnel facility complex. Develops digital engineering technology solutions that evolve with the project, are scalable to new applications, and are aligned with government architectures and frameworks. Engages the team to develop the critical DE data flows and workflows that streamline test conduct and improve test utility for aerospace system developers. Leads the development and implementation of DE platform tools, including digital twins, use of machine learning (ML) and artificial intelligence (AI) for improved design processes and test techniques, and integration of modeling and simulation (M&S) workflows for multi-domain design, analysis, and optimization. Digital Transformation: Guides the company’s digital modernization, including helping engineering leadership select and integrate new DE software tools and processes. Engages engineering workforce to support selection and adoption of new DE-related tools and workflows. Creates and leads training sessions with engineering staff to support DE upskilling. Team Management & Collaboration: Creates and leads highly functioning teams to develop digital engineering solutions and products. Effectively communicates the value proposition of digital engineering to grow team-wide understanding and interest. Fosters a collaborative and inclusive work environment that encourages innovation, accountability, and professional growth. Technical Expertise: Experience in architecting, designing and integrating a digital engineering hardware and software platform for a multi-domain, physical system / product. Practitioner of product lifecycle management tools, model-based systems engineering, and creating digital threads between software tools to integrate complex workflows and system development. Cross-functional Support: Partners with Division and Functional leadership to ensure alignment and seamless integration of digital initiatives. Performance Monitoring & Optimization: Tracks and analyzes digital performance metrics, providing insights and recommendations for improvement. Preferred Education / Experience: • Advanced degree in Mechanical Engineering, Aerospace Engineering, or a related discipline, • Minimum 10 years of experience in engineering projects pertinent to the responsibilities listed above, • A combination of education and experience equivalent to above Preferred Knowledge / Ability: • Strong knowledge of digital engineering tools and technologies, including model-based systems engineering (MBSE), product lifecycle management (PLM) tools, digital twins, digital threads, and cloud-based platforms, • Demonstrated success driving the technical execution of digital engineering platforms and initiatives, • Deep understanding of engineering principles, including mechanical, electromechanical, and aeronautical systems design, test, and evaluation, • Proficiency in interpreting engineering plans, technical drawings, and specifications, • Ability to define complex problems, analyze data, interpret abstract concepts, and develop effective solutions, • Skilled in project management, prioritization, budgeting, and delivering results on time, • Familiarity with Department of Defense (DoD) acquisition processes, R&D funding, and technology development programs, • Excellent written and verbal communication skills, with the ability to tailor messaging to technical and non-technical audiences, • Proficient in Microsoft Office and engineering-related software tools., • Active U.S. security clearance strongly preferred; candidates must be U.S. citizens and eligible to obtain and maintain a clearance Additional Preferred Qualifications: • Experience with aerospace test systems and / or vehicle development programs, • Background in early-stage research and development, product development methodologies, and innovation strategy

Job Description Join North Wind – Accelerating Hypersonic Innovation At North Wind, we are advancing hypersonic technologies through cutting-edge research, system development, and flight testing. Our team drives innovation in high-speed aerodynamics, propulsion systems, and mission-critical components, supporting every phase of hypersonic programs—from R&D to flight testing. If you are passionate about pushing technological boundaries in a dynamic environment, we invite you to join us. Lead Engineer – Advanced Data Science for Aerospace Systems Key technical leadership position that drives the development and adoption of advanced data science methods with artificial intelligence (AI) and machine learning (ML) for aerospace ground and flight test techniques and modeling and simulation (M&S) capabilities across North Wind. Experienced in the creation and application of neural networks for surrogate models and other ML approaches for aerospace domain problems. Practitioner of computational fluid dynamics (CFD) and / or finite element analysis (FEA) codes. Skilled communicator who can operate as an individual contributor and a leader while supporting engineers to learn new AI/ML methods. Responsibilities: Development of AI/ML Tools for Aerospace Projects: Leads technical efforts to apply machine learning, artificial intelligence, and advanced data science methods to develop new ground and flight test techniques and M&S capabilities and workflows, with specific application for a new wind tunnel facility complex. Performs CFD and / or FEA and develops scalable model training processes and algorithms to build fast-running surrogate models of complex physical processes. Supports the development and implementation of AI/ML for test facility digital twins and integration of M&S workflows for multi-discipline design, analysis, and optimization and uncertainty quantification. Supports integration of wind tunnel facility data collection and use of AI for predictive maintenance. Advanced Data Science Strategy: Force multiplier who leads North Wind’s ML adoption, including helping engineering leadership select and integrate new tools and processes leveraging advanced data science methods. Strategically recommends projects across North Wind where AI and ML will strengthen technical execution. Creates and leads training sessions with engineering staff to support AI/ML up-skilling. Builds a cadre of ML practitioners across North Wind. Recommends high performance computing hardware architectures to support North Wind AI/ML vision and strategy. Engages in technical forums, conferences, and working groups, with specific focus on ML applied to high-speed aerospace systems. Team Management & Collaboration: Creates and leads highly functioning teams to develop AI/ML solutions and products. Effectively communicates the value proposition of advanced data science methods to grow team-wide understanding and interest. Fosters a collaborative and inclusive work environment. Preferred Education / Experience: • Advanced degree in Mechanical Engineering, Aerospace Engineering, or a related discipline, • Minimum 7-10 years of experience in engineering projects pertinent to the responsibilities listed above, • A combination of education and experience equivalent to above Preferred Knowledge / Ability: • Strong knowledge of AI/ML tools, model training software, and technologies, • Skilled in building data pipelines and ML models using modern software libraries, including applications for deep learning and Bayesian modeling, • Proficient in aerospace industry standard CFD and / or FEA codes and tools, • Experienced in uncertainty quantification in the aerospace domain, • Deep understanding of engineering principles, including mechanical, electromechanical, and aerospace systems design, test, and evaluation, • Proficiency in interpreting engineering plans, technical drawings, and specifications, • Ability to define complex problems, analyze data, interpret abstract concepts, and develop effective solutions, • Demonstrated leadership of cross-functional teams from project conception to completion; guiding teams through planning, execution, and delivery phases, • Skilled in project management, prioritization, budgeting, and delivering results on time, • Excellent written and verbal communication skills, with the ability to tailor messaging to technical and non-technical audiences, • Proficient in Microsoft Office and engineering-related software tools, • Active U.S. security clearance strongly preferred; candidates must be U.S. citizens and eligible to obtain and maintain a clearance Additional Preferred Qualifications: • Experience with aerospace test systems and / or vehicle development programs, • Background in early-stage research and development, product development methodologies, and innovation strategy, • Familiarity with Department of Defense (DoD) acquisition processes, R&D funding, and technology development programs

Job DescriptionDescription: At Maxxima, we design and develop innovative LED lighting, electrical, and safety solutions for automotive, heavy-duty truck, and consumer applications. We are seeking an Electrical Engineer with a hardware-focused background to support product development, electrical lab testing, circuit troubleshooting, and PCB validation for our growing product lines. This is a hands-on engineering role working onsite at our Hauppauge, NY location, centered on electrical hardware testing, circuit-level debugging, and product validation. You’ll work closely with engineering leadership and cross-functional teams throughout the full product lifecycle, from prototype and testing through manufacturing and production support, while helping us continue building innovative products and a brand we’re proud of. Why Join Maxxima?: • Hands-on electrical engineering role focused on hardware, testing, and product validation, • Exposure to full product development lifecycle in LED lighting and automotive electrical systems, • Collaborative, fast-moving engineering team with direct access to leadership Benefits & Perks: • 401(k) with generous company match, • Paid time off, company-paid holidays, and volunteer day, • Highly subsidized medical coverage, plus dental and vision options, • Company-paid life insurance and disability coverage, • Healthcare concierge services and Employee Assistance Program (EAP), • Employee discounts on Maxxima products, entertainment, travel, and more Key Responsibilities: • Support product development from prototype to production, focusing on hardware validation and circuit performance, • Perform electrical lab testing, troubleshooting, and failure analysis on product designs, • Conduct PCB bring-up, board-level debugging, and verification testing, • Analyze analog and digital circuit behavior to ensure performance, safety, and reliability, • Use lab equipment such as oscilloscopes, multimeters, power supplies, and signal generators, • Review and interpret schematics, PCB layouts, wiring diagrams, and technical specifications, • Develop and improve test procedures and validation methods for electrical products, • Document test results, findings, and corrective actions for engineering and quality teams, • Collaborate with engineering, manufacturing, and quality teams to resolve hardware issues during development Requirements: • Bachelor’s degree in Electrical Engineering or related field, • 2+ years of experience in electrical engineering, product testing, or hardware validation, • Strong understanding of analog and digital circuitry, • Hands-on experience with PCB debugging, schematics, and electrical troubleshooting, • Experience using standard electrical lab equipment, • Strong analytical, troubleshooting, and communication skills, • Ability to manage multiple projects and priorities, • Experience with LED lighting, automotive electronics, or power electronics a plus, • Exposure to embedded systems (hardware interaction only) a plus, • Basic scripting (C, C++, Python, or LabVIEW) for test support a plus Salary Range: $65,000 - $75,000 Maxxima is a division of Panor Corp. We are an equal opportunity employer. Panor Corp. provides equal employment opportunity to all employees and applicants without regard to actual or perceived race, creed, color, citizenship, sex, pregnancy, religion, national origin, military status, marital status, sexual orientation, gender expression or identity, genetic information (including genetic predisposition), age, disability, status as a victim of domestic violence, or any other group protected by applicable federal, state and local laws. This policy applies to all terms and conditions of employment including, but not limited to, recruitment, hiring, assignment of duties, benefits, promotion, discipline, harassment, training, compensation, leave of absence, layoff and termination. Requirements:

Job Description iRocket (Innovative Rocket Technologies Inc.) is pioneering fully autonomous, fully reusable small launch vehicles to enable responsive, lower-cost access to space. We combine advanced propulsion, reuse, and sustainable propellant technologies to push the frontier of commercial space. The Role: We are seeking a Propulsion Engineer to join our propulsion team and contribute to the design, development, testing, and qualification of propulsion systems for our launch vehicles. You will work closely with integration, test, design, and manufacturing teams to bring propulsion systems from concept to flight readiness. • Support design, development, and testing of propulsion systems (e.g. liquid rocket engines, pressure-fed or pump-fed systems, component-level systems), • Participate in test campaigns, including planning, instrumentation, execution, and post-test analysis, • Develop and maintain test procedures, control sequences, and configuration files for propulsion testing, • Troubleshoot issues in propulsion subsystems (fluid, mechanical, thermal) during testing and integration, • Collaborate with cross-functional teams (mechanical, thermal, controls, electronics, systems) to ensure subsystem integration, • Perform calculations and simulations to support sizing, performance prediction, and optimization, • Support Test Readiness Reviews (TRRs), Failure Review Boards, and design reviews, • Implement continuous improvements to increase test efficiency, safety, and reliability, • Analyze test data, generate reports, and identify corrective actions Requirements • Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, or a related discipline, • 2+ years of experience in propulsion, test, or fluid/thermal systems development and testing, • Familiarity with liquid or hybrid rocket engine systems, fluid dynamics, thermodynamics, and heat transfer, • Experience with instrumentation, sensors, data acquisition, control systems, • Proficiency with scripting or programming (Python, MATLAB, etc.), • Ability to read and interpret engineering drawings, P&IDs, and technical specifications, • Strong problem-solving, data analysis, and communication skills, • Ability to work in multidisciplinary teams and in a fast-paced, evolving environment, • Experience with cryogenic fluids, high-pressure systems, or oxidizer/fuel systems, • Experience with CAD, simulation tools (CFD, thermodynamics, structural), or propulsion modeling, • Familiarity with propulsion test stands, plumbing, valve systems, or turbomachinery, • Experience in space, launch vehicle, or high-reliability systems, • Experience in formal test planning, instrumentation, and control software Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Location: Smithtown NY Compensation: $140,000–$155,000 base salary + 8% bonus plan The Opportunity Join a growing engineering team building embedded electronic products that support emergency response vehicles and first responders. As a Tech Lead Electrical Engineer, you'll own the design and development of embedded hardware—from concept through production—while leading technical decisions and mentoring a small team of engineers. This is an opportunity to shape multiple greenfield embedded systems products in a company actively integrating wireless networking and advanced electronics into mission-critical vehicle technology. Why You'll Love This Role • Lead from the front — own electrical architecture, embedded hardware development, and technical direction., • Build products that matter — develop systems used in emergency response and field-critical environments., • High-impact visibility — work across mechanical, software, manufacturing, and product teams to bring products to market., • Greenfield innovation — contribute to multiple new product initiatives in a growing engineering organization., • Strong business momentum — join a company performing well, with bonus payouts historically exceeding target. Your Day-to-Day, • Lead the design and development of embedded electronic systems for products including vehicle lighting, pressure governors, sensors, and control modules., • Drive hardware development including schematic design, PCB layout, functional testing, and system-level validation., • Define electrical architectures, select components (microcontrollers, sensors, drivers, wireless modules), and ensure performance, manufacturability, and regulatory compliance., • Provide day-to-day technical leadership and mentorship to a team of 2–3 engineers., • Collaborate cross-functionally with mechanical engineering, software, manufacturing, and product management teams to deliver reliable, field-ready products., • Manage engineering priorities, schedules, and resource planning to keep development on track., • Support product testing, validation, and transition into manufacturing., • Improve engineering processes, documentation, specifications, and hardware design standards., • Develop and maintain hardware component specifications, system-level requirements, and functional test plans., • Champion engineering best practices and continuous improvement across the team. What We're Looking For, • Strong expertise in microcontroller-based hardware design (ARM processor families preferred)., • Deep understanding of EMC / EMI-compliant electronic design., • Hands-on experience with schematic capture and PCB layout tools such as Altium., • Experience leading, mentoring, or guiding engineers in a technical team environment., • Strong understanding of communication protocols including CAN, I2C, SPI, and UART., • Experience with embedded wireless technologies such as Wi-Fi, Bluetooth, Cellular, or LoRa is a plus., • Strong troubleshooting and problem-solving skills with the ability to work cross-functionally., • Experience using lab and test equipment including oscilloscopes, multimeters, and signal generators., • Hands-on laboratory testing, debugging, and validation experience., • Must be a U.S. Citizen or Green Card holder. Ready to Apply? If you're excited to lead embedded hardware development, mentor engineers, and help build next-generation technology for first responders, this is an opportunity to make a meaningful impact while growing with a high-performing engineering team.

Job Description iRocket is pushing the frontier of reusable rocket propulsion. We’re looking for a Turbo Pump Engineer to design, analyze, and test turbomachinery for our reusable engines. The Role • Design, model, build, and test high-performance turbopumps (inducers/impellers/diffusers) for cryogenic rocket engines., • Perform hydrodynamic, aerodynamic, bearing, and rotor-dynamics analysis for rotating assemblies., • Develop manufacturing plans and build books, manage tolerance stack-ups, and ensure as-built compliance., • Monitor performance trends, analyze cavitation, vibration, thrust-balance, and clearance growth., • Execute root-cause investigations, iterate designs to improve cost, lead-time, and reliability., • Work cross-functionally with manufacturing, test, and propulsion design teams. Requirements • Bachelor’s degree in Mechanical or Aerospace Engineering., • 3+ years of turbomachinery or rocket-engine component experience, including design/build/test of turbopumps or related systems., • Strong knowledge of fluid/rotordynamics, cryogenics, bearings, and rotating machine behavior., • Proficiency in CAD (Siemens NX, SolidWorks, etc.), CFD/FEA, and test instrumentation., • Experience with machined, additively-manufactured parts, weldments, fasteners, seals, and rotating assemblies., • Strong communication and documentation skills, and ability to lead hardware workflows to delivery. Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Data is pivotal to our goal of frequent launch and rapid iteration. We’re recruiting a Data Engineer at iRocket to build pipelines, analytics, and tools that support propulsion test, launch operations, manufacturing, and vehicle performance. The Role • Design and build data pipelines for test stands, manufacturing machines, launch telemetry, and operations systems., • Develop dashboards, real-time monitoring, data-driven anomaly detection, performance trending, and predictive maintenance tools., • Work with engineers across propulsion, manufacturing, and operations to translate data-needs into data-products., • Maintain data architecture, ETL processes, cloud/edge-data systems, and analytics tooling., • Support A/B testing, performance metrics, and feed insights back into design/manufacturing cycles. Requirements • Bachelor’s degree in Computer Science, Data Engineering, or related technical field., • 2+ years of experience building data pipelines, ETL/ELT workflows, and analytics systems., • Proficient in Python, SQL, cloud data platforms (AWS, GCP, Azure), streaming/real-time analytics, and dashboarding (e.g., Tableau, PowerBI)., • Strong ability to work cross-functionally and deliver data-products to engineering and operations teams., • Strong communication, documentation, and a curiosity-driven mindset. Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description iRocket is developing fully autonomous, fully reusable small launch vehicles to provide responsive, cost-effective access to space. Our mission is to catalyze a new era of space exploration through innovation in propulsion, structures, and sustainable launch systems. The Role: We are seeking a Mechanical Engineer to contribute to the design, development, and transition of mechanical components and systems from development through production. You’ll partner with propulsion, manufacturing, integration, and test teams to help deliver high-performance, reliable rocket hardware. • Act as Responsible Engineer for key subsystems or components (e.g., valves, mechanical assemblies), • Advance design of parts and assemblies: create CAD models, drawings, and associated documentation, • Perform mechanical analyses, calculations, and design iterations to meet performance, mass, and reliability targets, • Collaborate with manufacturing teams to ensure designs are manufacturable, and iterate designs based on feedback, • Support fabrication, post-processing, inspection, and tolerance verification of parts, • Assist with integration, assembly, and test of mechanical and propulsion subsystems, • Create schematics, document design and manufacturing processes, and maintain records, • Participate in test campaigns, support troubleshooting, and analyze results, • Communicate progress, issues, and tradeoffs clearly across cross-functional teams, • Ensure safe practices and adherence to PPE and safety standards in lab, shop, and test areas Requirements • Bachelor’s degree in Mechanical Engineering or a related engineering discipline, • 3+ years of experience in mechanical design, development, fabrication, assembly, or test, • Proficiency in CAD, • Knowledge of GD&T, tolerance design, part and assembly drawings, • Strong problem solving, analytical thinking, and collaboration skills, • Excellent written and verbal communication skills, • Ability to manage multiple tasks in a fast-paced environment, • Experience in aerospace, propulsion, or high-reliability systems, • Hands-on engineering background (design to bench to manufacturing), • Experience with simulation or analysis tools (e.g. ANSYS, FEA), • Experience scripting or using tools such as MATLAB or Python, • Comfort iterating quickly, learning from experiments, and working through ambiguity Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job DescriptionDescription: The Field Engineer is a highly technical, field-based role responsible for supporting the installation, commissioning, startup, testing, and operational performance of industrial standby and prime power generation systems. This role plays a critical part in ensuring generator systems, paralleling switchgear, automatic transfer switches (ATS), and control systems are installed, commissioned, and operating safely, reliably, and in accordance with design specifications. The Field Engineer works closely with Project Managers, Field Service Technicians, electrical contractors, and customers to deliver high-quality power system installations across Kinsley’s Northeast service territory. Installation Review & Field Execution: • Review electrical one-lines, wiring diagrams, control schematics, and submittals to ensure proper field execution., • Support installation teams in identifying scope gaps, constructability issues, and technical discrepancies., • Conduct site visits to monitor installation progress and document deficiencies. Generator Commissioning & Startup: • Develop and execute pre-functional and functional startup checklists., • Lead commissioning of:, • Diesel and natural gas generator systems, • Paralleling switchgear, • Automatic Transfer Switches (ATS), • Load banks and associated controls, • Document commissioning results and provide turnover packages. Troubleshooting & Technical Support: • Diagnose and resolve complex electrical, mechanical, and control-related issues during startup and post-installation., • Support Field Service Technicians with advanced troubleshooting., • Analyze generator performance data to identify reliability concerns., • Assist in root cause analysis of system failures. Controls & Integration: • Support configuration and testing of:, • Generator controllers, • Paralleling logic and synchronization systems, • Remote monitoring systems, • Ensure proper integration of generators into facility electrical infrastructure. Customer Interface & Training: • Serve as the technical lead during startup and commissioning., • Provide customer training on system operation, emergency procedures, and maintenance requirements., • Deliver clear commissioning documentation and test reports., • Ensure smooth transition from installation to service support. Qualifications: • Equivalent field experience considered., • Experience in industrial generator systems, power distribution, or mission-critical backup power environments., • Strong knowledge of:, • Diesel and natural gas generator systems, • Paralleling switchgear, • ATS systems, • Load bank testing, • Engine controls and protection systems, • Working knowledge of NEC, NFPA 110, OSHA standards., • Proven ability to troubleshoot complex power systems in live environments., • Strong communication and leadership skills in field settings., • Valid driver’s license required. Travel & Working Conditions: • Significant travel within Kinsley’s service territory, • Work performed in hospitals, data centers, industrial facilities, utilities, and construction environments., • Exposure to energized electrical systems, mechanical equipment, and outdoor conditions., • Ability to lift up to 100 lbs and work in physically demanding environments. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or national origin. Requirements:

The Work You'll Be Doing In this role, you will: Perform first article, in-process, and final inspections Program and operate CMM equipment to verify precision machined components Inspect aerospace, defense, semiconductor, and instrumentation parts Interpret engineering drawings, GD&T, and customer

Robert Half is assisting a successful Outdoor Design company in hiring a Project Manager in the Central Islip area.We are looking for someone with Construction Project Management experience preferably in Residential and Commercial projects-- outdoor design projects would be ideal (i.Pools, Hardscape

Coordinate with architects, engineers, contractors, and clients to streamline communication and resolve design and construction issues.

Bachelor’s Degree in Construction Management, Engineering or a related field is preferred.

Construction Project Safety Manager.Montante Construction is seeking a Construction Project Safety Manager to join our growing team! If your skills, experience, and passion for safety at the job site align with this position, we would love to hear from you!.Montante Construction is a full-service co

Procurement, Workplace Strategy & Planning, Engineering, IT, Security, and Legal, while leading external consultants, contractors, and vendors to successful delivery. Cross-collaborate with Legal, Global Procurement, Workplace Strategy & Planning, Engineering, IT/AV, Security, EH&S, Facilities Opera

Oversee project schedules, budgets, procurement, and overall project performance.

Establish KPIs and performance metrics to track project outcomes, adoption rates, and ROI, and produce regular executive‑level reports and dashboards summarizing progress and insights. Bachelor’s degree in Business, Engineering, Architecture, Technology, or related field required.

Assistant Project Manager (HVAC).We are seeking a motivated and detail-oriented.This hybrid role combines project coordination with job costing responsibilities, making it ideal for someone who understands both field operations and construction accounting.You’ll support multiple HVAC or constructi

Quality Specialist (QA/QC – Inspection & Documentation).A leading technology solutions provider supporting government, education, and commercial clients, with a strong presence in aerospace/defense manufacturing is seeking a hands-on.This is a full-time, on-site position.ISO and AS9100 quality

Bachelor’s degree in Construction Management, Engineering, Architecture, or a related field preferred.

Coordinate with architects, engineers, subcontractors, and vendors. Track project performance and deliver detailed reporting. Competitive base salary + performance-based bonus.

Lead project meetings with clients, architects, engineers, and ownership representatives. Monitor project costs, forecasts, and overall financial performance.

We are looking for experienced landscape and/or irrigation installers who are looking for a change to join our landscape lighting team.The work is outdoors so you can still enjoy working outside and utilizing your skills while taking on a lighter task of installing landscape lighting and wiring.Work

Procurement, Workplace Strategy & Planning, Engineering, IT, Security, and Legal, while leading external consultants, contractors, and vendors to successful delivery. Cross-collaborate with Legal, Global Procurement, Workplace Strategy & Planning, Engineering, IT/AV, Security, EH&S, Facilities Opera

Lead problem-solving and value-engineering discussions. Bachelor's degree in Construction Management, Engineering, or related field.

Supported by Global Procurement, Workplace Strategy & Planning (finishes/logistics), Security, IT, and Engineering. Procurement, Workplace Strategy & Planning, Engineering, IT, Security, and Legal, while leading external consultants, contractors, and vendors to successful delivery. Cross-collaborate

Are you an experienced Project Manager with a desire to excel? If so, then Talent Software Services may have the job for you! Our client is seeking an experienced Project Manager to work in Melville, NY.Primary Responsibilities/Accountabilities:.Project Methodology in the creation of the project pla

We have an opening for a talented Netflix QA Tester to follow safety procedures and company policies, assist with organizing, stocking, and general upkeep, and manage daily responsibilities with a focus on quality and efficiency.

Coordinate with architects, engineers, contractors, and clients to streamline communication and resolve design and construction issues.

The Sr Microbiology Quality Engineer is responsible for Leading and managing Complaint Defect Tracking & Resolution (CDT&R) activities for assigned products—including complaint trend analysis, tracking of significant quality issues and corrective actions, triage of incoming complaints, and support

Staff Software Engineer Remote Job Duties: • Implement and evolve a Data Lake storage system with low latency and high throughput for bulk data ingestion and query • Implement metadata, data governance, security, and acce

Candid Worldwide is searching for a experienced, driven, meticulous Large Format Print Project Manager/CSR.We are seeking an individual who is detail-oriented, reliable and experienced in the Large Format Printing Industry to join our growing Production Team.The CSR will act as a liaison and be coor

Assistant Project Manager Construction/Architectural Products.Company/Industry: Architectural wall products/ceiling and floor solutions company.Salary: $65,000 - $85,000/yr depending on experience, with flexibility for the right candidate.Type: Direct hire with benefits.Assist Project Managers with

BS in Electrical Engineering, Software Engineering, or applicable equivalent experience. Assure appropriate test coverage is achieved. Prepare Software Development Life Cycle Data detailing requirements, design descriptions, test requirements, and traceability.

Senior Software Engineer that loves GIS. Write and test code, documenting and implementing functionally appropriate, technically sound, and well‑integrated application systems. Assure program, module, and system integrity through thorough testing.

Broadridge Financial Solutions is seeking a Senior Software Engineer (Java) in Edgewood, NY, to design, develop, and implement scalable technology solutions for business systems.

Have 5+ years of professional experience in software or data engineering, with a background in Computer Science, Software Engineering, Mechatronics, or Electronics. Want to be part of transforming road freight – for good? Einride is showing the world a new way to move, based on the latest digital,

A leading workforce provider in Melville is seeking an experienced Project Manager to lead IT project development and implementation.Candidates should have over 5 years of project management experience, especially in e-commerce, and must be US citizens or Greencard holders.This role requires strong

Tyler Technologies is looking for a Senior Software Engineer to join their GIS team located in Latham, NY.