Safety engineer jobs in Commack, New YorkCreate job alerts

Job DescriptionDescription: As a Maintenance Technician, you are responsible for the inspection, repairs, and maintenance of a variety of hotel systems and equipment. Our Maintenance Technicians are thorough professionals with a practical mind and attention to detail. The ideal candidate will be able to work on a team or alone and observe all health and safety guidelines. The goal is to maintain the buildings and common areas in the best possible condition. This position may require flexible scheduling availability. Requirements: Job Requirements: • Recognize, report, and correct potential safety hazards (broken doors or railings, fire hazards, etc.) and notify supervisors of any damages, deficits, and disturbances, • Complete basic plumbing, electrical, HVAC, carpet and tile floor maintenance and repairs, • Complete painting, minor roof repairs, and other exterior projects, • Complete pool and exercise room equipment repairs if necessary, • Ongoing involvement in preventative maintenance programs, • Check stocking levels of all consumables and replace when appropriate, • Work with Chief Engineer and Management team to identify and accomplish all technical and skilled related projects, • Prepares all necessary reports during each shift for the management team, • When required, report to Hotel in bad weather conditions for maintenance of Hotel's exterior (snow shoveling, ice melting, etc.) Job Qualifications: • Highly motivated team player with strong initiative and desire for achievement, • Must be effective in handling problems in the workplace including anticipating, preventing, identifying, and solving problems as necessary, • Ability to work well in stressful situations, • Ability to complete work orders on a timely basis, • Readily available and approachable for all guests while providing excellent guest service, • Ability and willingness to respond to emergency situations on short notice, • Responsible for knowing Hotel emergency procedures The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to stand, sit or walk for an extended period of time. While performing the duties of this job, the employee is regularly required to lift and/or move up to 10 pounds and frequently lift and/or move up to 25 pounds. The number of hours you will be scheduled to work during the week is variable and is based on guest occupancy, season, staffing and other factors. Island Hospitality is unable to guarantee a specific number of work hours per week. Training: Island Hospitality is committed to employee development and displays that commitment with a formalized training and development program providing a clear path for any employee with a desire and aptitude to thrive in the hospitality business. As team members join Island Hospitality from other organizations they too can build on that prior experience and find further growth opportunities within our company by utilizing the tools and resources offered. Team Member Wellness Program: How We Thank You For All You Bring To The Team Rewarding Benefits Package: • Healthcare including Medical, Dental, and Vision Insurance, • HSA & FSA plans available!, • Dependent care FSA, • Identity Theft Protection Insurance, • Commuter benefits including transit & parking, • Pet Insurance, • PTO and Payroll Incentives for Annual Wellness Exams, • Employee Assistance Program, • Wellness Subscriptions including access to gyms, financial planning, counseling, and legal services, • Paid Sick and Vacation Time, • Family Leave, • 401(k) Retirement plan - IHM Matches 100% up to 3% of your salary and an extra 50% on the next 2% of your salary. 401(k) is fully vested upon the first contribution Rewarding Hard Work: • Incentive based bonus program, • Free room nights at our hotels and employee discounts within your hotel brand, • Discounts for friends and family within your hotel brand, • Team Member recognition and bonus, • Discounted tickets to theme parks, musicals, movies, and more through Tickets at Work, • Career Growth through our in-house training program with a path personalized to your desired goals, • Referral bonus program to ANY of our locations Equal Opportunity Employer Island Hospitality uses E-Verify to confirm work authorization in all municipalities where it is required by law.

Looking to push innovation forward? Join Radienz Living’s R&D team and help develop next-generation products in home and personal care. We’re looking for curious, solutions-driven individuals who thrive on experimentation, collaboration, and turning ideas into reality. Radienz Living is a leading North American manufacturer of home and personal care products, such as unit dose laundry and dish products, facial wipes, and baby wipes. With manufacturing plants and warehouses in Mt. Prospect and Bensenville, IL and Commack, NY, the company provides customers with private-label solutions and contract manufacturing services for products found in retail and institutional markets. Through its commitment to agility, innovation, trust and reliability, and sustainable creation, Radienz Living is passionate about providing its customers with products that support a cleaner way of living and a more radiant world. The company has undergone a remarkable transformation over the years, focusing on two product lines: Unit Dose products, where it is the undisputed leader in Private Label and Contract Manufacturing, and Personal Care Wipes, where it manufactures the wipes for the country's #1 beauty care brand. Our commitment to operational excellence is supported by robust quality systems, multiple GMP certifications, and a comprehensive suite of in-house labs—including FDA/EPA-certified microbiology, quality control, chemistry, and R&D facilities. This infrastructure enables us to deliver innovation, safety, and performance at every stage of the product lifecycle. Background: The Lab Technician plays a critical role in all wipe product testing activities at Radienz Living. This position is responsible for testing samples for baby, facial, and MTT (Moist Toilet Tissue) wipe products. The role partners closely with other R&D team members to support product development activities. Responsibilities: • Perform testing under guidance from Scientist or Engineer; follow test protocol and record the data and observations during testing, • Analyze experimental data, interpret results, and make data-driven recommendations., • Prepare and maintain technical documentation, including specifications, test reports, and other documentation., • Prepare samples in the specific formats for sales meetings, industry conferences, tests or other business initiatives, • Follow all laboratory safety practices, chemical handling procedures, and company safety policies. Required Qualifications: • Bachelor’s degree in science or engineering, or equivalent industry experience., • Working knowledge of Microsoft Office Suite, including Word, Excel, and PowerPoint for documentation, data analysis, and presentations., • Any experience related to R&D lab work is preferred., • Any technical experience related to formula, trials or product development is preferred, • Knowledge of laboratory safety practices, chemical handling, and documentation standards., • Basic knowledge of research and development laboratory environment., • Basic knowledge of quality standard of wipe product analysis., • Ability to manage multiple tasks and meet aggressive timelines., • Effective written and verbal communication skills, including technical documentation., • High level of attention to detail, • Ability to work independently while also contributing effectively within a team environment. Physical Demands: • Ability to lift and move materials up to 50 lbs., • Frequently required to stand or walk for extended periods while conducting experiments or operating equipment., • Regular use of hands and fingers to handle laboratory instruments, pipettes, testing tools, or small components., • Frequent reaching, grasping, pushing, or pulling when setting up equipment or retrieving materials., • Close vision and ability to focus on detailed data, instruments, gauges, or microscopic materials., • Ability to move between laboratory workstations, testing areas, and production floors as needed. Work Environment: • Work is primarily performed in a laboratory or manufacturing test environment., • May involve exposure to chemicals, laboratory reagents, or production materials, requiring proper PPE., • Moderate noise levels from laboratory or manufacturing equipment may occur. We’re looking for passionate, driven individuals who want to make an impact—within our organization and beyond. If you’re ready to grow, contribute, and be part of something meaningful, we’d love to hear from you. Why join Radienz Living: • Medical, dental, and vision coverage, • 401(k) with company match, • 11 paid holidays, plus paid time off (PTO), • Flexible spending accounts, • Life insurance, AD&D, and supplemental coverage, • Opportunities for career growth through hands-on R&D experience, innovation projects, and cross-functional collaboration Equal Opportunity Statement: Radienz Living is an Equal Opportunity Employer and is committed to fostering a diverse and inclusive workplace. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

NOTICE: The posting for local applicants only - is not for those applying for a global assignment and/or for employees working outside of Cipla's U.S. Subsidiaries or Affiliates. Job Title: QA Validation - DPI FLSA Classification: Professional, Exempt Work Location: Unit 1, Hauppauge, NY Work Hours: General: 8:30AM - 5:00PM (may vary based on business needs) Reports To: QA Validation Manager Salary Range: $66,300 - $86,000 Purpose: The incumbent to this role performs and oversees cGMP compliance-based services (commissioning, qualification, validation, consulting, etc.) on equipment and facilities and utilities associated with pharmaceutical manufacturing and drug product development. Job Overview Responsible for the coordination of supportive equipment and process validation activities such as testing, calibration, scale-up, engineering and validation studies, and assurance that the necessary project documentation is complete, accurate and in compliance with cGMP regulations. The job duties for this position include but are not limited to the following: • Maintain compliance of the validation program to ensure all equipment, facility and utilities are qualified for pharmaceutical processes., • Oversee equipment calibration and preventative maintenance program by setting and confirming scheduling of all outside contractors and maintaining the equipment database, reviewing, and approving service support certificates/documents., • Prepare documents following established standards and templates, including but not limited to the following: commissioning Forms, protocols and reports, SOPs, impact assessment, specifications URS/FRS/DDS, FATs/SATs etc., • Perform work to meet company' requirements and quality standards., • Represent facility and engineer to communicate with internal and external stakeholders. Provide consistent, complete, and timely feedback, project status and issues, and reports to project managers and senior management., • Maintain departmental compliance pertaining to departmental SOPs, periodic review and reporting of the environmental monitoring system., • Generate, review, approve and maintain Validation Master Plan and summary reports and other Process validation lifecycle documents., • Evaluate process validation projects to establish protocols and test plans., • Collect and analyze all data, write final reports and obtain approvals., • Review technical documentation such as batch records, SOPs, calibration records, preventive maintenance work orders, protocols, reports., • Perform gap assessments and remediation as required on legacy validation packages., • Interface with the FDA and customers during site audits to respond to validation-related questions., • Assist in deviation investigation and resolution of problems and oversee change control requirements for all projects and work orders. Education and Experience • A bachelor's degree in scientific discipline (e.g., biology, chemistry, pharmacy) or a related field., • Must be proficient in computer skills and software applications such as Microsoft Office tools and Quality applications and software programs., • Minimum 1-2 years' experience in pharmaceuticals (DPI, MDI, oral solid or Injectables preferred). Technical Knowledge and Computer Systems Skills • Effective interpersonal relationship skills and the ability to work in a team environment., • Capable of conducting troubleshooting, investigations and root cause identification and analysis., • Capable of supporting and participating in compliance and regulatory audits at the local and federal levels., • Ability to work in a fast-paced, dynamic environment within a manufacturing operation setting., • Must be able to communicate clearly and concisely across all levels of the organization and possess a solid command of English language communication skills verbally, written, and interpersonally., • Must possess strong documentation and technical writing skills, and able to apply relevant scientific principles and practices., • Must be able to work under minimal supervision and able to work independently and in a team environment. Professional and Behavioral Competencies • Proficiently speak English as a first or second language andability to read, write and communicate effectively the same., • Must be a self-starter and demonstrate initiative to seek additional training or direction as needed., • Must be willing and able to work any assigned shift ranging from first or second shift; work schedules may be Monday to Friday., • Knowledge of good manufacturing practices and good documentation practices preferred., • Self-motivated, with the ability to work in a fast-paced manufacturing environment and handle multiple tasks simultaneously., • Excellent organizational skills with the ability to focus on details. Work Schedule and Other Position Information • Must be willing to work in a pharmaceutical manufacturing setting., • Must be willing to work some weekends based on business needs as required by management., • No remote work available., • This role works in cGMP laboratory or manufacturing environment, where personal protective equipment (PPEs) is required, which may include uniforms, lab coats, safety glasses, respiratory protective equipment, hearing protection, etc., • The role may be assigned on a work Weekend or Holiday work may be requested or required based on business needs. GLOBAL COMPANY Cipla is a leading global pharmaceutical company, dedicated to high-quality, branded and generic medicines. We are trusted by healthcare professionals and patients across geographies. Over the last eight decades, we have strengthened our leadership in India's pharmaceutical industry and fortified our promise of strengthening our global focus by consolidating and deepening our presence in the key markets of India, South Africa, the U.S., and other economies of the emerging world. Cipla employs handpicked professionals not just for their knowledge and experience but for their zeal to make a difference to the world of healthcare. The company believes that our biggest assets are the employees who lead us to prosperity and growth in the future. Driven by the vision, none shall be denied, Cipla's focus has always been on making affordable, world-class medicines with a reputation for uncompromising quality standards across the world. CIPLA NEW YORK (INVAGEN PHARMACEUTICALS, INC.) About InvaGen Pharmaceuticals, a Cipla subsidiary InvaGen Pharmaceuticals, Inc. is engaged in the development, manufacture, marketing, and distribution of generic prescription medicines with focus on a range of therapeutic areas, including cardiovascular, anti-infective, CNS, anti-inflammatory, anti-diabetic, and anti-depressants. The company was founded in 2003 and is based in Central Islip and Hauppauge, New York. As of February 18, 2016, InvaGen Pharmaceuticals, Inc. operates as a subsidiary of Cipla (EU) Limited. EEO Statement Cipla is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, genetic information, disability, or protected veteran status. About the Salary/ Pay Range: The salary range mentioned above is an anticipated base salary range for this position. Exact salary depends on several factors such as experience, skills, education, and budget. Salary range may vary based on geographic location. In addition to base salary, this position may be eligible for benefits and participation in a bonus program based on performance and company results.

NOTICE: The posting for local applicants only - is not for those applying for a global assignment and/or for employees working outside of Cipla's U.S. Subsidiaries or Affiliates Job Title PLC/Electrical Automation Engineer Organization Name InvaGen Pharmaceuticals, Inc. Location Hauppauge, NY Employment Type Full Time - Exempt Salary Range (Base/salary) $72,800 - 93,600 Annual Salary Benefits In addition to a fulfilling career and competitive salary, the Company offers a comprehensive benefits package to include a 401(k) savings plan and matching, health insurance - medical/dental/vision, health savings account (HSA), flexible spending account (FSA), paid time off (PTO) - vacation/sick/flex time, paid holidays, short-term disability (STD), long-term disability (LTD), parental leave, paid family leave, employee discounts, and other benefits. Work Hours/ Shift/ Remote General 8:30 am-5:00 pm Responsibilities/ Accountabilities • Manage all phases of electrical and control equipment throughout the plant. This includes preventive, corrective, emergency, warranty service, etc., • Diagnose and solve electrical problems for manufacturing and packaging equipment and systems., • Install, service, calibrate, and update electrical systems., • Repair and/or replace faulty electrical parts in manufacturing and packaging equipment., • Conduct inspections to ensure that products or systems are in a safe and usable condition., • Troubleshoot programmable logic controllers (PLC)/industrial programmable controllers (IPC)., • Assess building systems to plan work assignments and project schedules., • Develop maintenance procedures and schedules., • Ensure equipment maintenance and repair work are completed correctly and in a timely manner., • Plan and perform PMP for equipment and facilities. Education Qualifications/Experience • Bachelor's degree in electrical engineering or related field of study from an accredited institution with a preferred minimum of five (5) years of relevant work experience in an industrial / manufacturing setting., • Master's degree in electrical engineering or related field of study from an accredited institution with a minimum of three (3) years of relevant work experience in an industrial / manufacturing setting preferred., • Experience working in pharmaceutical manufacturing preferred. Skills/ Competencies • In-depth understanding of electronics, electrical systems, and mechanical engineering principles., • Advanced working knowledge of Microsoft Office Suite, AutoCAD and of computer operations in general., • Familiarity with Programmable Logic Controllers and Distributive Control Systems., • Ability to read electrical prints., • Ability to read P&IDs., • Ability to trouble shoot OMRON PLC hardware., • Ability to trouble shoot OMRON PLC logic utilizing OMRON software., • Ability to trouble shoot Allen Bradly PLC hardware., • Ability to trouble shoot Allen Bradley PLC logic utilizing Allen Bradley, • Working knowledge of 480V and 4160V electrical switchgear, motors, and starters., • Experience working from complex drawings and data, manuals, handbooks., • Experience using a wide variety of measuring instruments and electronic analyzing and testing equipment., • Thorough knowledge of electronic components, digital and analog circuitry, hydraulic systems, and machine tool principles essential., • Knowledge of GMP and various regulatory requirements., • Strong leadership skills and experience in industrial automation., • Ability to lead teams and facilitate the execution and completion of work., • Communicate effectively (verbal, written, presentation skills) in the English language., • Contribute and work collaboratively with geographically dispersed teams in HR and across other functional departments., • Apply practical knowledge of job area typically obtained through advanced education and work experience., • Work independently with general supervision., • Influence others within the job area through explanation of facts, policies, and practices., • Keen attention to details and must demonstrate use of good judgement and decision-making., • Excellent analytical, critical thinking, and problem-solving skills. Physical Requirements • Able to lift fifteen (15) pounds with or without assistance., • Able to frequently stand, bend, walk, sit, climb, balance, stoop or crouch, kneel, reach, push, pull, grasp, feel, talk, write, type, listen and hear., • Must be willing to work any shift or site as required., • Must be able to travel domestically and internationally as needed (less than 20%)., • Able to be able to wear personal protective equipment (PPE) such as hard hat, hair net, safety shoes, glasses, lab coat, and other required gear. About Cipla Cipla is a leading global pharmaceutical company, dedicated to high-quality, branded, and generic medicines. We are trusted by healthcare professionals and patients across geographies. Over the last eight decades, we have strengthened our leadership in India's pharmaceutical industry and fortified our promise of strengthening our global focus by consolidating and deepening our presence in the key markets of India, South Africa, the U.S., and other economies of the emerging world. Driven by the purpose 'Caring for Life', Cipla's focus has always been on making affordable, world-class medicines with a reputation for uncompromising quality standards across the world. In the last 85 + years, Cipla has emerged as one of the most respected pharmaceutical names in India as well as across more than 100 countries. Cipla is a fast-growing pharmaceutical company with a continued focus on the expanse of our strong legacy. Over the last five years, Cipla has significantly expanded its portfolio and presence in the U.S. with both a generic and brand division. InvaGen Pharmaceuticals, Inc. InvaGen Pharmaceuticals is a Cipla subsidiary engaged in the development, manufacture, marketing, and distribution of generic prescription medicines with focus on a range of therapeutic areas, including cardiovascular, anti-infective, CNS, anti-inflammatory, anti-diabetic, and anti-depressants. The company was founded in 2003 and is based in Central Islip and Hauppauge, New York. In October 2020, InvaGen established its project site in Fall River, Massachusetts to support the launch of Cipla's respiratory business in the United States. Equal Opportunity Employer Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status. At Cipla, we welcome people of all abilities and want to ensure that our hiring and interview process meets the needs of all applicants. If you require reasonable accommodation to make your application or interview experience a great one, please contact the recruiter. About the Salary/ Pay Range: The salary range mentioned above is an anticipated base salary range for this position. Exact salary depends on several factors such as experience, skills, education, and budget. Salary range may vary based on geographic location. In addition to base salary, this position may be eligible for benefits and participation in a bonus program based on performance and company results.

NOTICE: The posting for local applicants only - is not for those applying for a global assignment and/or for employees working outside of Cipla's U.S. Subsidiaries or Affiliates Job Title PLC/Electrical Automation Engineer Organization Name InvaGen Pharmaceuticals, Inc. Location Hauppauge, NY Employment Type Full Time - Exempt Salary Range (Base/salary) $76,000- 103,000 Annual Salary Benefits In addition to a fulfilling career and competitive salary, the Company offers a comprehensive benefits package to include a 401(k) savings plan and matching, health insurance - medical/dental/vision, health savings account (HSA), flexible spending account (FSA), paid time off (PTO) - vacation/sick/flex time, paid holidays, short-term disability (STD), long-term disability (LTD), parental leave, paid family leave, employee discounts, and other benefits. Work Hours/ Shift/ Remote General 8:30 am-5:00 pm Responsibilities/ Accountabilities • Manage all phases of electrical and control equipment throughout the plant. This includes preventive, corrective, emergency, warranty service, etc., • Diagnose and solve electrical problems for manufacturing and packaging equipment and systems., • Install, service, calibrate, and update electrical systems., • Repair and/or replace faulty electrical parts in manufacturing and packaging equipment., • Conduct inspections to ensure that products or systems are in a safe and usable condition., • Troubleshoot programmable logic controllers (PLC)/industrial programmable controllers (IPC)., • Assess building systems to plan work assignments and project schedules., • Develop maintenance procedures and schedules., • Ensure equipment maintenance and repair work are completed correctly and in a timely manner., • Plan and perform PMP for equipment and facilities. Education Qualifications/Experience • Bachelor's degree in electrical engineering or related field of study from an accredited institution with a preferred minimum of five (5) years of relevant work experience in an industrial / manufacturing setting., • Master's degree in electrical engineering or related field of study from an accredited institution with a minimum of three (3) years of relevant work experience in an industrial / manufacturing setting preferred., • Experience working in pharmaceutical manufacturing preferred. Skills/ Competencies • In-depth understanding of electronics, electrical systems, and mechanical engineering principles., • Advanced working knowledge of Microsoft Office Suite, AutoCAD and of computer operations in general., • Familiarity with Programmable Logic Controllers and Distributive Control Systems., • Ability to read electrical prints., • Ability to read P&IDs., • Ability to trouble shoot OMRON PLC hardware., • Ability to trouble shoot OMRON PLC logic utilizing OMRON software., • Ability to trouble shoot Allen Bradly PLC hardware., • Ability to trouble shoot Allen Bradley PLC logic utilizing Allen Bradley, • Working knowledge of 480V and 4160V electrical switchgear, motors, and starters., • Experience working from complex drawings and data, manuals, handbooks., • Experience using a wide variety of measuring instruments and electronic analyzing and testing equipment., • Thorough knowledge of electronic components, digital and analog circuitry, hydraulic systems, and machine tool principles essential., • Knowledge of GMP and various regulatory requirements., • Strong leadership skills and experience in industrial automation., • Ability to lead teams and facilitate the execution and completion of work., • Communicate effectively (verbal, written, presentation skills) in the English language., • Contribute and work collaboratively with geographically dispersed teams in HR and across other functional departments., • Apply practical knowledge of job area typically obtained through advanced education and work experience., • Work independently with general supervision., • Influence others within the job area through explanation of facts, policies, and practices., • Keen attention to details and must demonstrate use of good judgement and decision-making., • Excellent analytical, critical thinking, and problem-solving skills. Physical Requirements • Able to lift fifteen (15) pounds with or without assistance., • Able to frequently stand, bend, walk, sit, climb, balance, stoop or crouch, kneel, reach, push, pull, grasp, feel, talk, write, type, listen and hear., • Must be willing to work any shift or site as required., • Must be able to travel domestically and internationally as needed (less than 20%)., • Able to be able to wear personal protective equipment (PPE) such as hard hat, hair net, safety shoes, glasses, lab coat, and other required gear. About Cipla Cipla is a leading global pharmaceutical company, dedicated to high-quality, branded, and generic medicines. We are trusted by healthcare professionals and patients across geographies. Over the last eight decades, we have strengthened our leadership in India's pharmaceutical industry and fortified our promise of strengthening our global focus by consolidating and deepening our presence in the key markets of India, South Africa, the U.S., and other economies of the emerging world. Driven by the purpose 'Caring for Life', Cipla's focus has always been on making affordable, world-class medicines with a reputation for uncompromising quality standards across the world. In the last 85 + years, Cipla has emerged as one of the most respected pharmaceutical names in India as well as across more than 100 countries. Cipla is a fast-growing pharmaceutical company with a continued focus on the expanse of our strong legacy. Over the last five years, Cipla has significantly expanded its portfolio and presence in the U.S. with both a generic and brand division. InvaGen Pharmaceuticals, Inc. InvaGen Pharmaceuticals is a Cipla subsidiary engaged in the development, manufacture, marketing, and distribution of generic prescription medicines with focus on a range of therapeutic areas, including cardiovascular, anti-infective, CNS, anti-inflammatory, anti-diabetic, and anti-depressants. The company was founded in 2003 and is based in Central Islip and Hauppauge, New York. In October 2020, InvaGen established its project site in Fall River, Massachusetts to support the launch of Cipla's respiratory business in the United States. Equal Opportunity Employer Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status. At Cipla, we welcome people of all abilities and want to ensure that our hiring and interview process meets the needs of all applicants. If you require reasonable accommodation to make your application or interview experience a great one, please contact the recruiter. About the Salary/ Pay Range: The salary range mentioned above is an anticipated base salary range for this position. Exact salary depends on several factors such as experience, skills, education, and budget. Salary range may vary based on geographic location. In addition to base salary, this position may be eligible for benefits and participation in a bonus program based on performance and company results.

An Engineer within our Consumer Medical Products division (CMIT) will independently manage and execute timely completion of engineering safety investigations for a wide variety of cutting-edge medical products, laboratory equipment, consumer technology equipment, and other devices. Coordinates lab

Job Description$104,400 - $150,000/year + bonus 1st Shift Permanent (Full Time) SUMMARY: A Senior Electrical Design Engineer who analyzes, designs, prototypes, tests, and supports complex analog and digital components, subsystems, and systems. You will develop new product capabilities and improve core products by applying engineering principles, producing robust, requirements-based designs, and supporting products through the full development lifecycle. Typical projects are diverse and technically challenging and will grow your domain expertise and organizational knowledge. Works within engineering and cross-functional teams within and/or across the business unit or division. May have regular customer/supplier interaction. PRIMARY FUNCTIONS: • Develops complex conceptual and detailed Analog and Digital designs by analyzing product performance and customer requirements., • Performs diverse and complex product development, modification, and evaluation of components, subsystems, and systems by applying engineering principles and developing new or unique analysis tools as required., • Experience with microprocessor/microcontroller-based designs which include RAM, FLASH, ADCs, DACs, Supervisory ICs, Op-Amps/Signal Processing, Comparators, Serial Interfaces such as I2C, SPI, CAN, ARINC-429, Discrete Input/Output interfaces, etc., • Experience with requirement-based designs and using tools such as DOORS a plus., • Experience utilizing industry standard schematic entry tools such Dx Designer., • Capable of debug and support of new designs, production builds and field related issues., • Familiar with root cause and corrective action investigation tools., • Support product throughout the life cycle of development, including developing test procedures that ensure proper implementation of requirements., • Prepare for and conducts design reviews and various milestones throughout the product life cycle., • Develops complex conceptual and detailed design specifications by analyzing product performance and customer requirements. Investigates design factors such as function, performance, interchangeability, non-recurring and recurring cost, operational efficiency, and contractual requirements. Performs diverse and complex product development, modification, and evaluation of components, subsystems, and systems by applying engineering principles and developing new or unique analysis tools as required., • Applies scientific analysis and mathematical models to predict and measure the outcome and consequence of design alternatives. Interprets and validates test results for accuracy and precision. Oversees and monitors product acceptance procedures and parameters to achieve customer and product reliability and safety standards (e.g. failure analysis). Utilizes and interprets predictive models to simulate and verify design concepts., • Completes technical project elements (e.g. preparation of product or system layout; defining system architecture; etc.) as assigned. Develops critical data and analysis necessary to present technical product and/or system proposals to customers., • Contributes to the completion milestones associated with specific projects (e.g. create functional diagrams and system layouts; review detailed drawings and schematics; research customer data item requirements). Maintain efforts within defined cost and schedule constraints, including statusing and root cause/corrective actions of associated variances., • Reviews product specifications and/or modifications to ensure clarity, completeness, form, fit, function, and conformity to standards and procedures. Troubleshoots design errors, omissions, and other deficiencies, and recommends revisions, engineering change orders, and improvements to engineering management or the project team., • Provides technical information for review with product engineering teams applying consistent engineering practices, standards, and documentation methods (e.g. structured design process; customer design reviews). Writes supporting documentation for procedures and technical reports., • Conducts complex analysis and devises tests to validate performance in the development of new products, methods, materials or processes. Completes required documentation, generates detailed reports, creates customer proposals and presentations and/or change proposals. Determines required actions, performs or directs completion of tasks, and publishes findings and/or results., • Compiles and analyzes operation, test, and research data, develop acceptance, engineering evaluation, development and qualification/certification test plans, procedures, and reports., • May communicate with customers to identify new business opportunities, present Parker product capabilities, and clarify customers’ technical requirements. May write technical proposals for customers by reviewing and interpreting specifications and requirements., • Mentors or serves as a resource to share specialized knowledge with others. Establishes goals and objectives and tracks performance required to complete projects., • Bachelor’s degree (BS) (or Professional Engineer (PE) certificate) in Electrical Engineering. Master’s degree (MS) preferred., • Demonstrated ability to perform the essential functions of the job typically acquired through 7-9 years of related experience., • Has thorough in-depth knowledge of engineering domain principles, concepts, product standards, and techniques, industry practices, regulations, and policies. Ability to apply broad knowledge of other related engineering areas to area of expertise., • Demonstrated ability to investigate and implement new technologies., • Proficient with engineering design and analysis tools (e.g. DX Designer, PSpice/LTspice); ability to use standard software packages. May require capability using specialized software applications or languages., • Ability to establish individual objectives to complete projects and provide status to the team at project milestones. Ability to effectively influence the overall team and functional objectives., • Ability to effectively communicate and present status, actions, recommendations, and other technical information with clarity and precision. Ability to respond to significant inquiries from customers, regulatory agencies, or marketing/sales teams.

Job Description iRocket is developing fully autonomous, fully reusable small launch vehicles to provide responsive, cost-effective access to space. Our mission is to catalyze a new era of space exploration through innovation in propulsion, structures, and sustainable launch systems. The Role: We are seeking a Mechanical Engineer to contribute to the design, development, and transition of mechanical components and systems from development through production. You’ll partner with propulsion, manufacturing, integration, and test teams to help deliver high-performance, reliable rocket hardware. • Act as Responsible Engineer for key subsystems or components (e.g., valves, mechanical assemblies), • Advance design of parts and assemblies: create CAD models, drawings, and associated documentation, • Perform mechanical analyses, calculations, and design iterations to meet performance, mass, and reliability targets, • Collaborate with manufacturing teams to ensure designs are manufacturable, and iterate designs based on feedback, • Support fabrication, post-processing, inspection, and tolerance verification of parts, • Assist with integration, assembly, and test of mechanical and propulsion subsystems, • Create schematics, document design and manufacturing processes, and maintain records, • Participate in test campaigns, support troubleshooting, and analyze results, • Communicate progress, issues, and tradeoffs clearly across cross-functional teams, • Ensure safe practices and adherence to PPE and safety standards in lab, shop, and test areas Requirements • Bachelor’s degree in Mechanical Engineering or a related engineering discipline, • 3+ years of experience in mechanical design, development, fabrication, assembly, or test, • Proficiency in CAD, • Knowledge of GD&T, tolerance design, part and assembly drawings, • Strong problem solving, analytical thinking, and collaboration skills, • Excellent written and verbal communication skills, • Ability to manage multiple tasks in a fast-paced environment, • Experience in aerospace, propulsion, or high-reliability systems, • Hands-on engineering background (design to bench to manufacturing), • Experience with simulation or analysis tools (e.g. ANSYS, FEA), • Experience scripting or using tools such as MATLAB or Python, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Our mission at iRocket is frequent, affordable access to space. We’re hiring a Launch Engineer to manage end-to-end launch operations, integration, vehicle readiness, and mission execution across sites. The Role • Support vehicle assembly, integration, test (AIT), rollout, countdown, and flight operations., • Develop check-lists, execute vehicle/pad/environment checkouts, manage anomaly response during launch campaigns., • Coordinate with propulsion, avionics, structures, safety, and logistics teams to ensure mission readiness., • Monitor launch-site infrastructure, support logistics, GSE, and range coordination., • Bachelor’s degree in Engineering or related field., • 3+ years of launch operations, systems integration, or mission-execution experience (space or defense sector preferred)., • Strong organizational, communication, and problem-solving skills; comfortable in high-stakes environments., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description iRocket (Innovative Rocket Technologies Inc.) is pioneering fully autonomous, fully reusable small launch vehicles to enable responsive, lower-cost access to space. We combine advanced propulsion, reuse, and sustainable propellant technologies to push the frontier of commercial space. The Role: We are seeking a Propulsion Engineer to join our propulsion team and contribute to the design, development, testing, and qualification of propulsion systems for our launch vehicles. You will work closely with integration, test, design, and manufacturing teams to bring propulsion systems from concept to flight readiness. • Support design, development, and testing of propulsion systems (e.g. liquid rocket engines, pressure-fed or pump-fed systems, component-level systems), • Participate in test campaigns, including planning, instrumentation, execution, and post-test analysis, • Develop and maintain test procedures, control sequences, and configuration files for propulsion testing, • Troubleshoot issues in propulsion subsystems (fluid, mechanical, thermal) during testing and integration, • Collaborate with cross-functional teams (mechanical, thermal, controls, electronics, systems) to ensure subsystem integration, • Perform calculations and simulations to support sizing, performance prediction, and optimization, • Support Test Readiness Reviews (TRRs), Failure Review Boards, and design reviews, • Implement continuous improvements to increase test efficiency, safety, and reliability, • Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, or a related discipline, • 2+ years of experience in propulsion, test, or fluid/thermal systems development and testing, • Familiarity with liquid or hybrid rocket engine systems, fluid dynamics, thermodynamics, and heat transfer, • Experience with instrumentation, sensors, data acquisition, control systems, • Proficiency with scripting or programming (Python, MATLAB, etc.), • Ability to read and interpret engineering drawings, P&IDs, and technical specifications, • Strong problem-solving, data analysis, and communication skills, • Ability to work in multidisciplinary teams and in a fast-paced, evolving environment, • Experience with cryogenic fluids, high-pressure systems, or oxidizer/fuel systems, • Experience with CAD, simulation tools (CFD, thermodynamics, structural), or propulsion modeling, • Familiarity with propulsion test stands, plumbing, valve systems, or turbomachinery, • Experience in space, launch vehicle, or high-reliability systems, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description On-Site, Hauppauge, NY Narda-MITEQ is dedicated to recruiting and developing diverse, high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. Narda-MITEQ provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. Narda-MITEQ designs and manufactures an extensive range of standard active and passive components, as well as custom subsystems and integrated microwave assemblies to meet the requirements found on land, sea, air and the harsh environment of space. Our global customers rely on our deep technical expertise and innovation grounded in more than 70 years of experience to help them meet the challenges of their next-generation military and commercial applications. The following statements are intended to describe the general nature and level of work being performed. They are not intended to be an exhaustive list of all essential functions, duties, or skills required for this role. Management retains the discretion to add or change the duties at any time. Job Description We are seeking a highly motivated and technically strong Application Engineer to play a strategic technical role expanding and supporting the adoption of Narda Safety Test Solutions (Narda STS) product lines throughout the United States. Narda STS, based in Germany, is a global leader in RF test & measurement, EMF safety, spectrum monitoring, interference hunting, and EMC/EMI analysis. This position focuses on expanding Narda’s presence across key U.S. markets, including military and defense, government agencies, aerospace, telecommunications, and industrial customers. In this role you will act as the technical authority for Narda products in the U.S., providing end-to-end support, from pre-sales consulting and product demonstrations to application development and post-sales assistance. A critical part of this role includes collaborative technical engagement and brainstorming with customers, including military program offices, system integrators, and field engineers, to help identify mission requirements, design technical use cases, and propose innovative solutions using Narda STS equipment. Key Responsibilities Customer & Applications Engineering • Serve as the primary technical expert for Narda STS equipment including EMF meters, spectrum analyzers, RF interference detectors, RF direction finders, and spectrum monitoring systems., • Conduct product demonstrations for commercial, government, and U.S. military customers (onsite, virtual, and at trade shows)., • Work with customers to design test methods, solve operational challenges, and optimize their use of Narda products., • Engage in brainstorming sessions with defense and enterprise clients to develop application concepts, system configurations, and mission-specific use cases., • Provide Tier 1/Tier 2 technical support and coordinate with engineering teams in Germany for advanced issues., • Support sales initiatives by identifying customer needs and recommending the proper Narda STS solution set., • Prepare customized proposals, technical quotes, and configuration packages., • Support federal and military acquisition processes including RFP/RFQ responses., • Build strong relationships with key accounts in the defense, aerospace, telecom, and industrial sectors., • Collect customer feedback to help guide new product features, development, and roadmap discussions with Narda STS headquarters., • Maintain expertise in RF measurement, EMF regulations, spectrum-monitoring practices, and military-relevant standards., • Frequent domestic travel for customer visits, demonstrations, training sessions, field support, and events. Required • Bachelor’s degree in Electrical Engineering, RF Engineering, Physics, Communications Engineering, or equivalent technical experience with RF systems., • 2+ years in RF test & measurement, spectrum analysis, EMC/EMI, or similar technical field., • Strong understanding of RF concepts (modulation, spectrum behavior, antennas, interference, propagation)., • Proven customer-facing experience in pre-sales engineering, applications support, system integration, or field engineering., • Ability to lead technical discussions and explain complex concepts clearly., • Experience supporting U.S. military customers, defense contractors, or federal agencies., • Strong technical curiosity and problem-solving abilities., • Comfortable brainstorming technical ideas and application scenarios with customers., • Self-starter with excellent organizational and communication skills. Narda-MITEQ is proud to be an Equal Opportunity/Disability/Veterans Employer. We are committed to maintaining a workplace that is inclusive, respectful, and free from discrimination, where all employees and applicants are treated with dignity and fairness. Employment decisions are made in accordance with applicable federal, state, and local laws. All qualified applicants receive equal consideration without regard to race, color, religion, sex (including pregnancy, childbirth, breastfeeding, or related medical conditions), sexual orientation, gender identity or expression, age, national origin, marital status, citizenship status, disability, protected veteran status, or any other characteristic protected by law. Narda-MITEQ complies with applicable Executive Orders, including affirmative action requirements for individuals with disabilities and veterans. Narda-MITEQ is a drug-free workplace and conducts pre-employment substance abuse testing and background checks, as permitted by law. If you are a qualified individual with a disability or a disabled veteran and require a reasonable accommodation to use or access the Narda-MITEQ career website due to your disability, you have the right to request such an accommodation. To request a reasonable accommodation, please contact Denise Nocerino at . Proof of employment authorization will be required. Narda-MITEQ is not required to sponsor applicants for work visas. As this position will require access to export-controlled information, only applications from “U.S. persons” within the meaning of the International Traffic in Arms Regulations and Export Administration Regulations will be considered. Narda-MITEQ is not required to seek export license for applicants who do not meet this requirement.

Job Description Position Summary The Manufacturing Engineer will work within the Engineering Department to create and evaluate existing manufacturing processes for vertical and horizontal lathes, and multi-axis milling machines. Responsibilities • Develop cost effective manufacturing process to support 4-5 axis machining centers, • Design cost effective and quick changeover manufacturing fixtures and tooling, • Create shop floor documentation including operation sheets and work instructions, • Implement cost reduction initiatives utilizing Lean Manufacturing techniques, • Initiate corrective actions to floor processes, • Cost estimating and quoting, • Participation in lean and continuous improvement events Qualifications: • Experience with Aerospace materials, • Proficient with Unigraphics NX4-5, CAM and 3D modeling, • Must be accustomed to deadlines and accountability, • Experience with complex aerospace parts including milling and turning processes, • Lean manufacturing techniques, • Effective time management skills including multi-tasking, • Ability to read blueprints. Speak and write reports in English., • High attention to detail., • Develop and follow procedures., • 3+ years experience Job Posted by ApplicantPro Company DescriptionAir Industries Group is an Aerospace and Defense Company that has been supplying flight critical and other sophisticated parts and assemblies to Prime Defense and Commercial aerospace manufacturers for over 50 years. We manufacture and assemble structural parts and assemblies that focus on the safety of flight.Air Industries Group is an Aerospace and Defense Company that has been supplying flight critical and other sophisticated parts and assemblies to Prime Defense and Commercial aerospace manufacturers for over 50 years. We manufacture and assemble structural parts and assemblies that focus on the safety of flight.

Job Description Ranked the #4 Large Employer to Work for in America and residing in the Top 400 on Engineering News Record (ENR)'s List of Top Design Firms in the nation, TPD is currently hiring dynamic Engineers at all levels. Our ideal candidate has minimum of 4-8 years of experience, a strong work ethic, a desire to learn, the willingness to work cohesively within a team, and the ability to work on multiple projects. Additionally, we offer a creative, flexible, supportive and fun environment! Duties and Responsibilities include, but are not limited to: • Manage projects, staff and clients., • Work with multi-disciplinary teams on tasks such as work zone traffic, intersection design, traffic signal design, roadway signing and pavement marking plans, DOT access permitting, control plans and traffic signal operations analysis., • Assist in the preparation specifications, plans, construction schedules, impact studies, permits, and designs for projects., • Assist with traffic/parking studies, corridor planning, feasibility studies, and safety audits., • Bachelor’s Degree in Civil Engineering, • Professional Engineering (PE) license in NY required (or ability to obtain within first 6 months), • Professional Traffic Operations Engineer (PTOE) desirable, • Excellent oral and written communication skills, • Experience with design standards, NYSDOT/NYCDOT/CTDOT/NJDOT experience (desirable), • Knowledge of CADD Software (MicroStation or AutoCAD), • Strong work ethic and ability to work on multiple projects and ability to meet multiple deadlines, • Knowledge of Microsoft Office Suite Don't meet every qualification or skill in the description? That's ok! We are fully committed to expanding our staff and culture to best serve our clients and our communities. If you are interested in this position but don't completely align with every qualification listed, we encourage you to apply. You may be what we are looking for, for this role or maybe for another open position. At TPD we exist to improve the quality of life for the public and are dedicated to Moving Forward Together.

Job Description About CAMP Systems: At CAMP Systems, we are the trusted leader in aircraft compliance and health management, proudly serving the global business aviation industry. With over 20,000 aircraft and 33,000 engines supported on our cutting-edge platforms, and partnerships with more than 1,300 maintenance facilities and parts suppliers worldwide, we’re shaping the future of aviation technology. Since our founding in 1968, we’ve grown to a dynamic team of 1,600+ employees across 14 locations globally—all united by a passion for innovation and excellence. Our Mission & Vision: We connect the aviation industry through smart technology to make flight safer and more efficient, driving the future of aviation with intelligence and exceptional customer experiences. Our Values & Excellence Mindset: We are customer obsessed, trust-driven, owners of our work, stronger together, constantly curious, and boldly innovative. What You Will Experience in This Role: We are seeking a full stack Associate Software Engineer with expertise in .NET and Angular to join our talented engineering team. Working part of an Agile Scrum team, you will play a key role in building, scaling, and maintaining enterprise-grade web applications that serve a diverse range of customers. You will work closely with product managers, designers, and other developers to create seamless, performant, and highly scalable solutions. We expect all our team members to contribute towards building a culture of continuous learning and improvement. We are open to new approaches and ideas. CAMP offers a unique domain, as well as a chance to be part of a product that affects the readiness, safety, and performance of business aircraft from nearly every major manufacturer. Like many of our team, if you are selected, with hard work, a continued quest for knowledge, and a knack for troubleshooting, there are endless possibilities for growth and development. Responsibilities: • Implement, enhance and maintain robust, scalable, and high-performance web applications using .NET (Core, ASP.Net, Web API) and Angular & ExtJS., • Build and integrate front-end and back-end components, ensuring performance, responsiveness, and security., • Utilize state-of-the-art AI coding tools, LLMs, and frameworks to accelerate software development, automate testing, and improve code quality., • Collaborate with cross-functional teams including product managers, designers, QA, and DevOps., • Participate in code reviews and contribute to maintaining high standards of code quality and best practices., • Assist in troubleshooting and debugging issues in production and lower environments., • Write unit and integration tests to ensure code quality and reliability., • Experience in .NET (C#), ASP.NET MVC, Web API, NHibernate, and Oracle (or equivalent relational database systems)., • Proficiency with Angular, JavaScript, HTML5, CSS3, and TypeScript., • Experience in implementing and integrating with REST APIs., • Experience in building and maintaining enterprise-grade data-driven web applications using .NET, Angular, other JavaScript frameworks., • Understanding of object-oriented design and software engineering principles., • Experience working in Agile or Scrum development environments., • Education: Bachelor’s degree in computer science, Information Technology, or a related field., • Strong problem-solving skills and the ability to think critically and creatively., • Excellent communication skills, both written and verbal, with the ability to collaborate effectively with technical and non-technical team members. Salary Range: $80,000 - $90,000 DOE (Depending on experience) Why Work at CAMP? Join a culture where your ideas matter, your impact is real, and your growth is supported. Be part of a team reimagining the future of aviation. CAMP is committed to creating a diverse environment and is proud to be an affirmative action and equal opportunity employer – vets/disabled CAMP is committed to providing access, equal opportunity, and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, please contact . All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, sexual orientation, gender identity, disability or protected veteran status EEO.

Job Description About CAMP Systems: At CAMP Systems, we are the trusted leader in aircraft compliance and health management, proudly serving the global business aviation industry. With over 20,000 aircraft and 33,000 engines supported on our cutting-edge platforms, and partnerships with more than 1,300 maintenance facilities and parts suppliers worldwide, we’re shaping the future of aviation technology. Since our founding in 1968, we’ve grown to a dynamic team of 1,600+ employees across 14 locations globally—all united by a passion for innovation and excellence. Our Mission & Vision: We connect the aviation industry through smart technology to make flight safer and more efficient, driving the future of aviation with intelligence and exceptional customer experiences. Our Values & Excellence Mindset: We are customer obsessed, trust-driven, owners of our work, stronger together, constantly curious, and boldly innovative. What You Will Experience in This Role: We are seeking a full stack Software Engineer with strong expertise in .NET and Angular to join our talented engineering team. Working part of an Agile Scrum team, you will play a key role in designing, building, scaling, and maintaining enterprise-grade web applications that serve a diverse range of customers. This is a hands-on position, we want someone who is focused, and passionate about coding, and development. You will work closely with product managers, designers, and other developers to create seamless, performant, and highly scalable solutions. We expect all our team members to contribute towards building a culture of continuous learning and improvement. We are open to new approaches and ideas. CAMP offers a unique domain, as well as a chance to be part of a product that affects the readiness, safety, and performance of business aircraft from nearly every major manufacturer. Like many of our team, if you are selected, with hard work, a continued quest for knowledge, and a knack for troubleshooting, there are endless possibilities for growth and development. Responsibilities: • Design & Development: Architect and implement robust, scalable, and high-performance web applications using .NET (Core, ASP.Net, Web API) and Angular and ExtJS., • Code Quality: Write clean, maintainable, and well-documented code following the industry’s best practices. Perform code reviews and mentor junior developers to ensure coding standards are met., • End-to-End Ownership: Manage the full software development lifecycle, from gathering requirements to deployment and ongoing maintenance., • Collaboration: Work collaboratively with cross-functional teams including product managers, designers, QA engineers, and other developers to deliver high-quality features on time., • Performance Optimization: Focus on optimizing the performance of both front-end and back-end components, ensuring the application scales effectively and provides an excellent user experience., • Testing & Quality Assurance: Implement unit tests, integration tests, and other automated tests to ensure the reliability and stability of the application., • Troubleshooting & Debugging: Investigate production issues, resolve defects, and implement preventative measures for future releases., • Backend: Expertise in .NET Core (C#), ASP.NET MVC, Web API, NHibernate, and Oracle (or equivalent relational database systems)., • Frontend: Strong proficiency with Angular, HTML5, CSS3, and TypeScript., • APIs: Experience designing and implementing RESTful APIs and working with OAuth and JWT authentication., • Cloud: Experience with AWS cloud platform., • ML/AI: Experience with LLM integration, NLP, training and utilization of ML models., • Version Control: Proficient in Git for version control., • Enterprise Architecture: Highly proficient with 5+ years of experience building scalable enterprise-grade systems with a focus on performance, maintainability, and extensibility. Solid understanding of object-oriented design and software engineering principles., • Web Application: Solid experience in data driven web applications using Angular, other JavaScript frameworks., • Agile Methodology: Proven experience working in Agile or Scrum development environments., • Containerization: Experience with Docker, Kubernetes, or other containerization technologies., • DevOps: Knowledge of DevOps practices and tools (CI/CD pipelines, infrastructure as code)., • Education: Bachelor’s degree in computer science, Information Technology, or a related field., • Strong problem-solving skills and the ability to think critically and creatively., • Excellent communication skills, both written and verbal, with the ability to collaborate effectively with technical and non-technical team members., • Self-driven with a focus on delivering high-quality results on time., • Ability to handle multiple priorities and navigate complex technical challenges. Compensation range for this opportunity is currently $110k - $120k DOE Why Work at CAMP? Join a culture where your ideas matter, your impact is real, and your growth is supported. Be part of a team reimagining the future of aviation. CAMP is committed to creating a diverse environment and is proud to be an affirmative action and equal opportunity employer – vets/disabled CAMP is committed to providing access, equal opportunity, and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, please contact . All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, sexual orientation, gender identity, disability or protected veteran status EEO.

Required Combination of Knowledge and Skill Bachelors degree from an accredited college or university in a related technical, engineering or science field and a minimum of 9 years of relevant experience; or Masters degree from an accredited college or university in a related technical, engineering o

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

The FM Safety Engineer will be responsible for, but not limited to, the following duties: - Development and execution of the FM Continuous Training Program - Ownership of the FM surveillance plan - Review of Engineered Technical Work Documents prior to FM execution - Performance of various IH/Safety

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Required Combination of Knowledge and Skill Bachelors degree from an accredited college or university in a related technical, engineering or science field and a minimum of 9 years of relevant experience; or Masters degree from an accredited college or university in a related technical, engineering o

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash

Our company promotes a positive culture while ensuring the safety and reliability of our nation's naval nuclear reactors, and training the Sailors who operate those reactors in the U. Preferred Skills PMP Certification Primavera P6 Experience Familiar with Construction Work Scopes Familiar with Engi

Our company promotes a positive culture while ensuring the safety and reliability of our nation's naval nuclear reactors, and training the Sailors who operate those reactors in the U. Deter, detect and/or report violations of security and safety policies/ regulations. We rely on the dedication and i

Our company promotes a positive culture while ensuring the safety and reliability of our nation's naval nuclear reactors, and training the Sailors who operate those reactors in the U. Coordinates efforts of many support groups including in-house crafts, engineers, and subcontractors. Develops projec

What will I do? - Respond to emergency situations providing clear, calm, and decisive direction while providing medical care to the appropriate level of training/certification as needed - Manage access control; verify that vendors, contractors, and other visitors have a business purpose to be on si

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

This includes understanding work instructions, safety protocols, and communications essential to the role. The requirement is directly related to the nature of the job and ensures compliance with workplace safety and operational standards. Being reliable and dedicated to safety has defined our succe

Crestline Hotels & Resorts - JobID: J5208faa3f5fb4b59ab016df471a3e52a-1 [Maintenance Mechanic] As a Maintenance Technician at Crestline Hotels & Resorts, you'll: Perform routine maintenance tasks to ensure the efficient operation of hotel facilities; Oversee and repair electrical, plumbing, and HVAC