Safety engineer jobs in Atlanta, GeorgiaCreate job alerts

Additional Information Job Number26040561 Job CategoryEngineering & Facilities LocationThe Westin Peachtree Plaza Atlanta, 210 Peachtree St NW, Atlanta, Georgia, United States, 30303 ___ ScheduleFull Time Located Remotely?N Position Type Non-Management POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display thorough knowledge of building systems, emergency response, and building documentation including reading standard blue prints and electrical schematics concerning plumbing and HVAC. Display advanced engineering operations skills and general mechanical ability. Display professional journeyman level expertise in at least three of the following areas with basic skills in the remaining: air conditioning and refrigeration, electrical, plumbing, carpentry and finish skills, mechanical, general building management, pneumatic/electronic systems and controls, and/or energy conservation. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Perform routine inspections of the entire property, noting safety hazards, lack of illumination, down equipment (such as ice makers, fans, extractors, pumps), and take immediate corrective action. Inspect and repair all mechanical equipment including, but not limited to: appliances, HVAC, electrical and plumbing components, diagnose and repair of boilers, pumps and related components. Use the Lockout/Tagout system before performing any maintenance work. Display thorough knowledge of maintenance contracts and vendors. Display advanced knowledge of engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers (e.g., Engineers I, II, and III) as necessary and supervise work in progress and act in a supervisory role in the absence of supervisors and/or management. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers and/or point of sale systems. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent. Certificate in two-year technical diploma program for HVAC/refrigeration. Related Work Experience: Extensive experience and training in general maintenance (advanced repairs), electrical or refrigeration, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. REQUIRED QUALIFICATIONS License or Certification: Valid Driver’s License License or certification in refrigeration or electrical (earned, or currently working towards receiving) Universal Chlorofluorocarbon (CFC) certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. At Westin, we are committed to empowering guests to regain control and enhance their well-being when they need it most while traveling, ensuring they can be the best version of themselves. To achieve the brand mission of becoming the preeminent wellness brand in hospitality, we need passionate and engaged associates to bring the brand’s unique programming to life. We want our associates to embrace their own well-being practices both on and off property. You are the ideal Westin candidate if you are passionate; you are active and take pride in how you maintain your well-being; you are optimistic; you are adventurous. Be where you can do your best work, begin your purpose, belong to an amazing globalteam, and become the best version of you.

JLL empowers you to shape a brighter way. Our people at JLL are shaping the future of real estate for a better world by combining world class services, advisory and technology for our clients. We are committed to hiring the best, most talented people and empowering them to thrive, grow meaningful careers and to find a place where they belong. Whether you’ve got deep experience in commercial real estate, skilled trades or technology, or you’re looking to apply your relevant experience to a new industry, join our team as we help shape a brighter way forward. Location: Atlanta, GA (Hartsfield Jackson International Airport) Shift: 3rd Shift; (Tuesday-Saturday) Operating Engineers will be responsible for the overall maintenance, operation, and cleaning associated with the operation of a large industrial utilities’ facility providing Steam, Heated Hot Water, Instrument and Zero Air, Compressed Air, Chilled Water, and other services to an industrial facility. Stationary Engineers should expect to spend their time engaged in monitoring system operations, equipment repair, preventive maintenance tasks and responding to equipment needs as required. Areas of responsibilities include: Plant Equipment * Chilled water systems * Water tube boilers * Fire tube boilers * Cooling towers * Compressed Air Systems * Compressed Air Dryers * Cooling tower and boiler water chemical treatment Mechanical Systems Diagnosis & Repair * Steam traps * DDC Control Valves * Air actuators * Piping systems * PLC panels * Vibration analysis and other predictive maintenance tasks Logging and Data retention * Logbook data entries- analysis of readings * Plant meter readings- analysis of readings * Trending equipment readings Building Systems * Building Automation Systems * Building Monitoring systems * Building Utility & Piping Systems Measurables & Objectives: * Meet or exceed client expectation * Meet or exceed KPI’s * Safety Training Related Objectives * Utilize Pre-Task Planning Methods Performance Measurables * PM Completion * Environmental Task Completion & Reporting * Corrective Maintenance Repair Completion * Perform General Housekeeping in Common Work Areas Qualifications The equivalent of a high school education plus four years of experience in one of the following: • In high-pressure boiler and pressure vessel construction or repair,, • As an operating engineer in charge of high-pressure boiler operations, • Must hold current CFC Universal card Boiler Operators or Stationary Engineers II License(s). GA Certificate of Competency, • Ten plus years of facility maintenance experience preferred., • Ability to safely operate portable hand and power tools., • Must have strong written and verbal communication, detail oriented and must have extensive knowledge on Microsoft Office Suite. #HVACjobs #MMjobs #OEjobs This position does not provide visa sponsorship. Candidates must be authorized to work in the United States without sponsorship. Location: On-site –Atlanta, GA If this job description resonates with you, we encourage you to apply, even if you don’t meet all the requirements. We’re interested in getting to know you and what you bring to the table! Personalized benefits that support personal well-being and growth: JLL recognizes the impact that the workplace can have on your wellness, so we offer a supportive culture and comprehensive benefits package that prioritizes mental, physical and emotional health. Some of these benefits may include: * 401(k) plan with matching company contributions * Comprehensive Medical, Dental & Vision Care * Paid parental leave at 100% of salary * Paid Time Off and Company Holidays * Early access to earned wages through Daily Pay At JLL, we harness the power of artificial intelligence (AI) to efficiently accelerate meaningful connections between candidates and opportunities. Using AI capabilities, we analyze your application for relevant skills, experiences, and qualifications to generate valuable insights about how your unique profile aligns with the specific requirements of the role you're pursuing. JLL Privacy Notice Jones Lang LaSalle (JLL), together with its subsidiaries and affiliates, is a leading global provider of real estate and investment management services. We take our responsibility to protect the personal information provided to us seriously. Generally the personal information we collect from you are for the purposes of processing in connection with JLL’s recruitment process. We endeavour to keep your personal information secure with appropriate level of security and keep for as long as we need it for legitimate business or legal reasons. We will then delete it safely and securely. For more information about how JLL processes your personal data, please view our ___. For additional details please see our career site pages for each country. For candidates in the United States, please see a full copy of our Equal Employment Opportunity policy ___. Jones Lang LaSalle (“JLL”) is an Equal Opportunity Employer and is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process – including the online application and/or overall selection process – you may email us at ___. This email is only to request an accommodation. Please direct any other general recruiting inquiries to our ___ page > I want to work for JLL. Accepting applications on an ongoing basis until candidate identified.

Description Looking for an opportunity to make an impact? At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. Your greatest work is ahead! We are looking for a Lead Substation Protection & Control Engineer to join our team. As an Career Protection & Control Engineer, candidates will have the opportunity to design substation protection and control projects for electric utilities at voltages from 12kV up to 500kV. This is an exciting and growing field in the power systems industry and allows candidates to get exposure to how the power generation such as that of renewable energy ties into the electric system. Candidates will be expected to use knowledge of digital logic design, AC and DC circuits to design substation electrical projects. *Remote Option: • Candidates must be located in the United States and live further than 50 miles from the Atlanta, GA office., • Preferred candidates would be located in (Georgia, South Carolina, Tennessee, or Alabama), • Must be willing to travel to customer sites and in office as needed. (10% to 20% travel) *Hybrid Work Schedule: (3 days in office) • 2–3 Days of In-Person Connection: Build strong relationships with colleagues and clients by being in the office or on-site. It’s the perfect way to strengthen collaboration and ensure seamless communication., • Networking Events: Expand your horizons and make valuable connections at industry-leading events. You’ll be in the right rooms, with the right people, at the right time., • Continuous Development: Stay at the forefront of innovation by participating in top-tier training programs and conferences. Personal growth isn’t optional here; it’s part of the package., • The Best of Both Worlds: With the flexibility to work remotely on other days, you’ll have the freedom to focus, recharge, and bring your A-game to every opportunity. Successful candidates can look forward to a fast paced, diverse work environment and flexible work hours/work arrangements as well as managers who will encourage career development and growth including: • Engineer in Training Certificate (EIT)., • Professional Engineer License (PE)., • Project Management Professional (PMP)., • Technical & Non-Technical Training Opportunities., • Leadership Opportunities., • Mentorship & Training Opportunities., • Opportunity to Lead, Grow, and Inspire a Dynamic Team In this role, you can also expect to gain experience in the following: • Interfacing with Local Clients., • Partnering with a Variety of Utility Clients Nationwide., • Working with different types of projects ranging from distribution to transmission level voltages., • Electrical Power Calculations., • Interactions with Other Disciplines (Substation, Telecom, and Civil Structural, etc). Are you ready to make an impact? Begin your journey of a flourishing and meaningful career, share your resume with us today! The Challenge: • Relay One Line Design., • Three Line AC Schematic Design., • DC Protection Schematic Design., • Panel Layout and Wiring Design., • Develop Bill of Materials Based on Design Criteria., • Quality Control Checks on Wiring Design., • Complete Project Lifecycle Support from Scoping to Final Design and Implementation., • Construction Support., • Applying the Minimum Requirements of the National Electrical Safety Code to the Design Processes, • Working with Client Standards to Implement Design., • Working with a Designer/Drafter to Create the Required Drawings for Each Project. Successful candidates must comply with quality control and safe work practices and maintain compliance with project scope, schedule, and budget. This position will be a member of a design team comprised of engineers, designers, and CAD technicians and will work with client standards to implement design. What Sets You Apart: • Bachelor’s degree in electrical engineering, or related degree with eight (8+) or more years of Substation protection control design and/or field testing/commissioning experience., • Experience in executing substation protection and control projects., • Demonstrate Excellent communication skills and ability to interact with the internal team and clients to meet project needs., • Ability to read and design substation protection and control drawings such as one-line drawings, three-line drawings, AC/DC schematic drawings and wiring design., • Ability to meet deadlines under pressure situations., • Collaborator and leader who can work effectively in team environment., • Self-starter who works independently with minimal direction., • Strong analytical skills and proven problem solver in both team and independent environments., • High level of computer competency., • Willingness to travel to project and/or client sites. You Might Also have: • Engineer Intern (“EI” or “EIT”) professional certification., • Professional Engineer (“PE”) License., • Experience performing quality control checks on small substation protection and control design projects., • Experience working on CAD tools., • Master’s degree in related field., • Field testing/commissioning experience. WHAT WE DO Leidos is a trusted and technology-focused solutions provider. Utilities and mobile operators rely on our Power Delivery Services Team for reliable power and telecommunication expertise, as reflected through our work with more than 50 investor-owned utilities, more than 160 municipals/cooperatives, as well as a growing number of mobile operators, local utility providers and private developers. In addition to providing engineering and project management services, Leidos works with an established group of industry-leading construction partners delivering meaningful Energy Delivery Solutions. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms. To explore and learn more, click ___! At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. We take care of our employees. Leidos seeks the best and the brightest, and in return, we invest in you, with an eye on your future, through career advancement, growth opportunities and continuous improvement via mentoring, formal and informal project management training and assistance with obtaining pertinent certifications. We challenge you to help solve some of the world’s toughest problems, and ___ with a welcoming culture that recognizes the importance of a strong work/life balance, as well as ___. We believe that diversity and inclusion make us all better and offer the chance to have fun and make a difference. PowerDelivery PDSSUBSTATION If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. February 11, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $107,900.00 - $195,050.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws. #Featuredjob

Description Looking for an opportunity to make an impact? At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. Your greatest work is ahead! We are looking for a Lead Substation Protection & Control Engineer to join our team. As an Career Protection & Control Engineer, candidates will have the opportunity to design substation protection and control projects for electric utilities at voltages from 12kV up to 500kV. This is an exciting and growing field in the power systems industry and allows candidates to get exposure to how the power generation such as that of renewable energy ties into the electric system. Candidates will be expected to use knowledge of digital logic design, AC and DC circuits to design substation electrical projects. *Remote Option: • Candidates must be located in the United States and live further than 50 miles from the Atlanta, GA office., • Preferred candidates would be located in (Georgia, South Carolina, Tennessee, or Alabama), • Must be willing to travel to customer sites and in office as needed. (10% to 20% travel) *Hybrid Work Schedule: (3 days in office) • 2–3 Days of In-Person Connection: Build strong relationships with colleagues and clients by being in the office or on-site. It’s the perfect way to strengthen collaboration and ensure seamless communication., • Networking Events: Expand your horizons and make valuable connections at industry-leading events. You’ll be in the right rooms, with the right people, at the right time., • Continuous Development: Stay at the forefront of innovation by participating in top-tier training programs and conferences. Personal growth isn’t optional here; it’s part of the package., • The Best of Both Worlds: With the flexibility to work remotely on other days, you’ll have the freedom to focus, recharge, and bring your A-game to every opportunity. Successful candidates can look forward to a fast paced, diverse work environment and flexible work hours/work arrangements as well as managers who will encourage career development and growth including: • Engineer in Training Certificate (EIT)., • Professional Engineer License (PE)., • Project Management Professional (PMP)., • Technical & Non-Technical Training Opportunities., • Leadership Opportunities., • Mentorship & Training Opportunities., • Opportunity to Lead, Grow, and Inspire a Dynamic Team In this role, you can also expect to gain experience in the following: • Interfacing with Local Clients., • Partnering with a Variety of Utility Clients Nationwide., • Working with different types of projects ranging from distribution to transmission level voltages., • Electrical Power Calculations., • Interactions with Other Disciplines (Substation, Telecom, and Civil Structural, etc). Are you ready to make an impact? Begin your journey of a flourishing and meaningful career, share your resume with us today! The Challenge: • Relay One Line Design., • Three Line AC Schematic Design., • DC Protection Schematic Design., • Panel Layout and Wiring Design., • Develop Bill of Materials Based on Design Criteria., • Quality Control Checks on Wiring Design., • Complete Project Lifecycle Support from Scoping to Final Design and Implementation., • Construction Support., • Applying the Minimum Requirements of the National Electrical Safety Code to the Design Processes, • Working with Client Standards to Implement Design., • Working with a Designer/Drafter to Create the Required Drawings for Each Project. Successful candidates must comply with quality control and safe work practices and maintain compliance with project scope, schedule, and budget. This position will be a member of a design team comprised of engineers, designers, and CAD technicians and will work with client standards to implement design. What Sets You Apart: • Bachelor’s degree in electrical engineering, or related degree with eight (8+) or more years of Substation protection control design and/or field testing/commissioning experience., • Experience in executing substation protection and control projects., • Demonstrate Excellent communication skills and ability to interact with the internal team and clients to meet project needs., • Ability to read and design substation protection and control drawings such as one-line drawings, three-line drawings, AC/DC schematic drawings and wiring design., • Ability to meet deadlines under pressure situations., • Collaborator and leader who can work effectively in team environment., • Self-starter who works independently with minimal direction., • Strong analytical skills and proven problem solver in both team and independent environments., • High level of computer competency., • Willingness to travel to project and/or client sites. You Might Also have: • Engineer Intern (“EI” or “EIT”) professional certification., • Professional Engineer (“PE”) License., • Experience performing quality control checks on small substation protection and control design projects., • Experience working on CAD tools., • Master’s degree in related field., • Field testing/commissioning experience. WHAT WE DO Leidos is a trusted and technology-focused solutions provider. Utilities and mobile operators rely on our Power Delivery Services Team for reliable power and telecommunication expertise, as reflected through our work with more than 50 investor-owned utilities, more than 160 municipals/cooperatives, as well as a growing number of mobile operators, local utility providers and private developers. In addition to providing engineering and project management services, Leidos works with an established group of industry-leading construction partners delivering meaningful Energy Delivery Solutions. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms. To explore and learn more, click ___! At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. We take care of our employees. Leidos seeks the best and the brightest, and in return, we invest in you, with an eye on your future, through career advancement, growth opportunities and continuous improvement via mentoring, formal and informal project management training and assistance with obtaining pertinent certifications. We challenge you to help solve some of the world’s toughest problems, and ___ with a welcoming culture that recognizes the importance of a strong work/life balance, as well as ___. We believe that diversity and inclusion make us all better and offer the chance to have fun and make a difference. PowerDelivery PDSSUBSTATION If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. February 11, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $107,900.00 - $195,050.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws. #Featuredjob

Description Leidos is seeking a Civil Design Engineer to join the National Airspace System Integration Support Contract (NISC IV) team. In this role you will support the Federal Aviation Administration's (FAA) Eastern Service Area (ESA) performing design engineering, cost estimating, scheduling, coordinating, inspecting, and acceptance and report project progress and issues against project goals, scope of work, and schedule. The projects support air traffic control facilities over the geographic scope of the ESA. You will ensure accuracy of design, products and timeliness of project completion. Hybrid position Located in College Park, GA Up to 25% travel Civil Engineer Primary Responsibilities: • Plan and design a variety of facility establishment, replacement and modernization projects (e.g. buildings, roofing, antenna towers, site work, structural systems, seismic reinforcement, foundations and environmental assessments), • Lead on-site surveys to develop designs and detailed reports, • Conduct meetings with managers, architects and multi-disciplinary engineers, • Conduct and analyze studies of existing facilities, • Respond to RFIs (Requests for Information), • Utilize relevant software tools to assist in analysis and design, • Generate sketches showing relation of proposed work in existing or new facilities with specifications and dimensions, • Plan, schedule, and coordinate construction project activities to meet milestones and deadlines working directly with stakeholders and contractors, • Confer with multi-disciplinary engineering staff and other personnel to identify and resolve problems with the design or implementation, • Prepare construction drawings and prepare site-specific specifications and contract documents and independent cost estimates, • Review contractor design and construction submittals, • Perform project management related tasks and communication (including safety plans, sequence of work, cutover plans, risk management plans, lead and asbestos work permits), • Lead on-site coordination meetings, inspections, cutovers, testing and restoration of facilities, • Provide periodic updates of project to team, management, and stakeholders, • Provide timely responses for requests for information and project related submittals, • Provide monthly and semi-annual work status reports, • Track and reconcile closure of project punch list exceptions, • Manage multiple projects towards successful on-time completion, • Perform internal design reviews of other projects Civil Engineer Basic Qualifications: • Engineering degree from a college or university accredited by the Accreditation Board for Engineering and Technology (ABET)., • Eight or more years of experience in design and construction of commercial or institutional facilities. Or a Masters degree and six+ years of relevant experience., • Proficient knowledge of building codes., • Proficient in Microsoft Office suite., • Proficiency in engineering analysis and design software tools, • Ability to create and edit project drawings in AutoCAD., • Ability to obtain and maintain public trust suitability. Civil Engineer Preferred Qualifications: • Registered Professional Engineer in good standing in the United States. If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. March 9, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $92,300.00 - $166,850.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

JLL empowers you to shape a brighter way. Our people at JLL are shaping the future of real estate for a better world by combining world class services, advisory and technology for our clients. We are committed to hiring the best, most talented people and empowering them to thrive, grow meaningful careers and to find a place where they belong. Whether you’ve got deep experience in commercial real estate, skilled trades or technology, or you’re looking to apply your relevant experience to a new industry, join our team as we help shape a brighter way forward. Summary The Assistant Chief Engineer supervises and directs operating engineers in installation, repair, and maintenance of all base building and critical system machinery and equipment. Responsible for supervising the operating team on their shift. Assumes the Chief Engineers responsibilities if the Chief Engineer is not on site. Principal Duties and Responsibilities Task will include but not be limited to: * Supervise and direct maintenance staff on shift and monitor performance of assigned responsibilities. * Perform and/or direct the performance of all maintenance departmental service requests, ensuring that work performed in these areas is accomplished efficiently with a minimum amount of disruption and inconvenience. * Check malfunctioning equipment and ascertain corrective action required to restore to satisfactory operating condition. * Provide training and supervision aimed at expanding the capabilities of the operations staff. Specific duties include, but not limited to: Demonstrating the proper use and care of tools and instruments, giving hands on instruction in basic maintenance, safety, and troubleshooting procedures, recommending relevant outside engineering courses for enrollment, and instilling an overall level of professionalism in manner and appearance. * Supervise and implement the preventative maintenance program. Specific duties include but are not limited to: scheduling of preventative maintenance with a minimum disruption of building services, performing and/or delegating preventative maintenance tasks to the appropriately qualified maintenance staff member, orders parts and equipment required for repair, maintenance and installation of new equipment and facilities, and maintains inventory. * Direct the performance of contracted maintenance work as needed. Specific tasks include but are not limited to: ensuring the timely performance of maintenance contract work, overseeing the fulfillment of equipment warrantee obligations by the installer and securing equipment manuals and drawings from the installers/contractors. * Responsible for maintaining, monitoring and performing preventive maintenance and continuous operation of all building systems including: fire/life safety, mechanical (HVAC, plumbing, controls) electrical (lighting, UPS, PDU, generators, primary switch gear), emergency backup systems and hot water systems; monitors operation, adjusts, and maintains refrigeration, chilled water, and air conditioning equipment; boilers, and ventilating and hot water heaters; pumps, valves, piping and filters; other mechanical and electrical equipment; record readings and make adjustments where necessary to ensure proper operation of equipment. Requires the ability to analyze the operation of various systems, determine the cause of any problems/malfunctions and take corrective action as required. * Comply with departmental policy for the safe storage, usage, and disposal of hazardous materials. Maintains a clean and safe workplace. * Ensure the availability of an adequate operating inventory of tools and supplies. Specific duties include, but are not limited to: Preparing and submitting purchase-order requests, developing sources for stock materials and performing periodic checks for supplies. * Responsible for the operational management and effective daily leadership and administration of the engineering team with the objectives of safely, efficiently, and effectively operating machinery and systems in a cost-effective manner. * The Assistant Chief Engineer must ensure the highest level of professionalism, while meeting the clients’ needs, and commitment to achieving the goal of 100% uptime throughout the engineering team. Responsible for protecting and improving the value of the clients’ assets and ensuring that building engineering systems continue to perform their intended function. * Responsible for overseeing the activities of contractors working within the building either as representatives of the building itself or tenants operating within the buildings. * Responsible for keeping records of buildings rounds and readings, all engineering logs and engineering data sheets. * Responsible for advance training and notification to all contractors so that they are informed and knowledgeable with respect to the building’s critical functions and the work they are to perform, including an incident contact response list. * Responsible for understanding and complying with emergency escalation procedures. * Ensure that the CWA (Critical Facility Work Authorization) is a well-understood process among the building staff, engineers, tenants and contractors who perform work on the building’s critical infrastructure. * Ensure strict adherence to Critical Awareness Process, Technical Bulletins, established engineering guidelines, processes, and procedures. * Assist Chief Engineer in implementation of Key Performance Indicators (KPI’s) and Individual Performance Plan’s. * Performs additional job duties as requested. Supervisory Responsibilities * Assist Chief Engineers in supervising operating engineers * Carries out supervisory responsibilities in accordance with the policies enumerated with Jones Lang LaSalle and applicable laws. * Planning, assigning, and directing work. Minimum Requirements: Education & Experience * Must have hands-on experience in a data center/critical facility, including UPS Systems, emergency generators, and switch-gear * High School diploma or GED equivalent * 5+ years related work experience, including supervisory experience * Operating Engineers license (SMA) or equivalent * Certification as a Universal Technician for CFC’s (or within 90 days of employment) Language Skills * Demonstrated verbal/written communication skills. * Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. * Ability to read, analyze, and interpret technical procedures, or governmental regulations and codes. * Ability to write routine reports and correspondence. * Ability to speak effectively before small groups of tenants or fellow employees. Other Skill and Abilities * Working knowledge or the capability of developing proficient knowledge of Microsoft Word, Microsoft Excel, Outlook and Microsoft Access and any other software packages. * Must be able to professionally interact with tenants and contractors. Preferred Requirements: * Corrigo Experience. * MCIM / Salesforce Experience. * Zendesk Experience. * Service Now Experience. * Received EPA 608. * Trained in NFPA70E. Physical Requirements: This position will require the following: * Walking large, campus-like settings. * Frequent walking, climbing, bending, kneeling, lifting, stooping, and working/extending overhead, including: * Lifting a minimum of 50 lbs. * Climbing stairs and navigating rooftops to access equipment. * Using ladders up to 30 ft and working from heights. * Ability to Climb a ladder with a 300-lb weight limit. * Must be able to work different schedules. * Must be able to work Holidays. * Must be able to respond to site emergencies. #FMJobs This position does not provide visa sponsorship. Candidates must be authorized to work in the United States without sponsorship. Location: On-site –Atlanta, GA If this job description resonates with you, we encourage you to apply, even if you don’t meet all the requirements. We’re interested in getting to know you and what you bring to the table! Personalized benefits that support personal well-being and growth: JLL recognizes the impact that the workplace can have on your wellness, so we offer a supportive culture and comprehensive benefits package that prioritizes mental, physical and emotional health. Some of these benefits may include: * 401(k) plan with matching company contributions * Comprehensive Medical, Dental & Vision Care * Paid parental leave at 100% of salary * Paid Time Off and Company Holidays * Early access to earned wages through Daily Pay At JLL, we harness the power of artificial intelligence (AI) to efficiently accelerate meaningful connections between candidates and opportunities. Using AI capabilities, we analyze your application for relevant skills, experiences, and qualifications to generate valuable insights about how your unique profile aligns with the specific requirements of the role you're pursuing. JLL Privacy Notice Jones Lang LaSalle (JLL), together with its subsidiaries and affiliates, is a leading global provider of real estate and investment management services. We take our responsibility to protect the personal information provided to us seriously. Generally the personal information we collect from you are for the purposes of processing in connection with JLL’s recruitment process. We endeavour to keep your personal information secure with appropriate level of security and keep for as long as we need it for legitimate business or legal reasons. We will then delete it safely and securely. For more information about how JLL processes your personal data, please view our ___. For additional details please see our career site pages for each country. For candidates in the United States, please see a full copy of our Equal Employment Opportunity policy ___. Jones Lang LaSalle (“JLL”) is an Equal Opportunity Employer and is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process – including the online application and/or overall selection process – you may email us at ___. This email is only to request an accommodation. Please direct any other general recruiting inquiries to our ___ page > I want to work for JLL. Accepting applications on an ongoing basis until candidate identified.

GridBlock Senior Power Electronics Controls Atlanta, Georgia About GridBlock GridBlock is an innovative energy router that dynamically manages the flow of energy between multiple sources and loads and has the ability to create and operate a self-contained microgrid. GridBlock packetizes and routes electrical energy with isolation and high accuracy to serve AC or DC systems seamlessly. The precision technology enables a bidirectional power flow on multiple ports or channels concurrently, bringing the flexibility and control of Internet routers and switches to the electrical grid. Increasingly, electrical installations require smart integration of EV or e-truck charging, battery storage, solar panels and critical loads, with custom design and build for each location adding to the cost of implementation. GridBlock simplifies all of this with a flexible, software-defined, modular solution that can manage a wide variety of end-use configurations and applications, from 500kW to 100+ MW deployments. GridBlock is part of Endeavour, a purpose-built company taking on global challenges to guarantee renewable energy and clean water to everyone, everywhere by decentralizing infrastructure, developing new technologies, and deploying energy, water, and waste treatment solutions that are more profitable than those that currently exist. Endeavour companies are made up of passionate change-makers who want to leave the world better than the way we found it. Today, Endeavour is deploying solutions that are immediately scalable and profitable, including EV charging, data center cooling, and waste to fuel systems. As we look to the future, Endeavour and GridBlock intend to remain at the forefront of innovation, taking on grander challenges based on the needs of our clients and of local economies. Opportunity GridBlock has an exciting opportunity for a Power Electronics Controls Engineer. In this position you will work with a cross-functional research & development team and develop high-performance controls for advanced power electronics systems at the heart of GridBlock’s energy routing technology. You will be responsible for the dynamics modeling, control architecture design, performances verification in simulation, digital control implementation and hardware validation on hardware-in-the-loop setups and through power tests. The Power Electronics Controls Engineer needs to be agile, professional, and comfortable in a rapidly changing environment. The right person is highly organized, self-motivated, has excellent communication skills, can think strategically, and works equally as well independently as with a team. Key responsibilities • Develop dynamic models of power electronics converters including resonant converters, and advanced power electronics topologies in Matlab Simulink and PLECS, • Derive control architecture and investigate performances, robustness and stability across the entire operating space through fundamental analysis, simulation studies and hardware test, • Define subsystem and system-level tests to validate the newly implemented algorithms and their interactions with existing features, • Discretize control algorithms for software implementation, and work with the firmware team to integrate into the embedded real-time control platform, • Outline controller requirements based on system performance targets, • Test, validate, and troubleshoot digital control implementation on hardware controller, • Support safety/compliance testing Skills & Requirements Experience • MS or PhD in Electrical Engineering specialized in power electronics or controls, • Strong knowledge of power electronics systems working principles, including AC/DC, DC/AC, DC/DC, AC/AC conversion and grid-connected converters, • Knowledge of advanced power topologies including resonant and soft-switching topologies, • Experience with firmware writing (C/C++ programming) for power electronics products, • Strong hands-on testing and troubleshooting experience, • Experience with real-time HIL simulation platforms (OPAL-RT, Typhoon, etc.), • 10+ years of experience designing, testing and certifying control architectures for high power (20+ kW) conversion systems with proven deployment records, • Experience with SoC and FPGA systems

Key Role Responsibilities - Core ME ENGINEER FAMILY – CORE • Learns and actively participates in all aspects of the company’s safety and quality plans and culture by demonstrating commitment to an injury-free environment through individual actions and mentoring others., • Completes entry level and routine mechanical, electrical and field construction activities., • Learns how to develop budgetary M/E estimates, based upon program and schematic design information using automated M/E estimating system., • Assists in the review of mechanical and electrical options as part of the preconstruction process and completes systems analysis for select projects., • Learns to develop the mechanical and electrical scopes of work used to coordinate during the bid process., • Assists in the completion of bid analysis and provides input during the subcontractor selection process., • Assists in developing sequencing requirements of various systems and providing solutions to meet the schedule requirements., • Gains knowledge of design documents in order to identify potential quality problems to assist in developing constructability review reports., • Learns to perform job inspections to ensure specifications and expectations are met and work is completed in a quality and timely manner., • Learns and assists with the shop drawing/submittal process to comply with the contract documents. SENIOR M/E ENGINEER In addition, this position will be responsible for the following: • Completes increasingly complex mechanical, electrical and field construction activities., • Develops budgetary M/E estimates, based upon program and schematic design information., • Reviews mechanical and electrical options, completes systems analysis, recommends best system for the project and provides value engineering suggestions., • Coordinates the mechanical and electrical scopes of work during the bid process., • Develops sequencing requirements of various systems and provides solutions to meet the schedule requirements. Provides scheduling input during projects., • Reviews design documents and identifies potential quality problems. Helps develop quality control programs., • Performs job inspections at various times in the project to ensure specifications and expectations are met and work is completed in a quality manner., • Develops pre-functional checklists and functional testing procedures. Verifies contractor’s performance of functional test., • Reviews and approves shop drawings prior to submitting to the design team., • Generates and issues the Commissioning Plan for approval to the appropriate parties., • Verifies deficiencies are corrected and submits commissioning documentation to owners., • Provides mentoring to less experienced co-workers., • Creates M/E tools and innovative solutions to continuously improve processes and work products., • Negotiates subcontracts with subcontractors., • Purchases equipment from equipment vendors for assigned projects., • Builds relationships by being the direct face with the client., • Participates in interviews for winning work, presentations and business development efforts., • Represents the M/E department and JE Dunn at external community events., • Assumes responsibility for resource allocation, staffing of their assigned projects and ensuring reimbursability requirements are met., • Ability to perform work accurately and completely, and in a timely manner., • Communication skills, verbal and written (Advanced)., • Ability to conduct effective presentations (Advanced)., • Proficiency in MS Office (Advanced)., • Ability to read and understand plans, drawings and specifications., • Proficiency in basic JE Dunn construction M/E tools and software., • Ability to apply fundamentals of the means and methods of construction management to projects., • Thorough knowledge of project processes and how each supports the successful completion of a project., • Ability to build relationships with team members that transcend a project., • Proficiency in required construction technology (Advanced)., • Proficiency in scheduling software (Intermediate)., • Proficiency in BIM (Building Information Modeling) (Intermediate)., • Ability to apply Lean process and philosophy (Advanced)., • Ability to manage budgets, maximize profitability and generate future work through building relationships (Advanced)., • Demonstrated knowledge of ASE and Lens (Intermediate)., • Ability to construct a project from start to finish., • Ability to prepare the project budget, GMP or hard bid., • Ability to complete range estimates., • Ability to assist Marketing team with presentation and marketing activities., • Ability to manage a team., • Bachelor’s degree in mechanical engineering, electrical engineering, architectural engineering or related field (Required)., • 10+ years construction management experience (Preferred).

About Us Clayco is a full-service, turnkey real estate development, master planning, architecture, engineering, and construction firm that safely delivers clients across North America the highest quality solutions on time, on budget, and above and beyond expectations. With $7.6 billion in revenue for 2024, Clayco specializes in the "art and science of building," providing fast track, efficient solutions for industrial, commercial, institutional, and residential related building projects. The Role We Want You For As a Senior Project Cost Engineer, you will assist in the development and management of the project financial strategy. You will be working directly with the project management team to manage the project budget, costs, change orders, pricing requests, billings, and forecasts. You will be responsible for generating and maintaining reports that provide information to different groups, work with the management team to identify variances, risks and maintain quality control processes to improve project cost procedures and ensuring conformity with management's strategy. The Specifics of the Role • Works with all project disciplines to ensure understanding of total project cost budget allowances and targets., • Review project documents and specifications to accurately identify, develop and track request of change orders (owner and subcontractor related), baseline estimates, potential risk exposures while communicating potential impacts to the financial targets, schedule, and overall project management process., • Works closely with the accounting department to ensure the correct integration of all information needed to ensure accuracy in billings, payment applications, change orders, direct cost, labor cost, etc., • Works closely with the project management team, executive management personnel, subcontractors, as well as occasional contact with clients., • Responsible for cost engineering, cost estimation, cost analysis, and control activities for projects with significant non-routine requirements or for proposal estimating activities which require a moderate degree of technical skill and experience., • Ensuring quality, accuracy, consistency, spend profile, performing change management, and transparency in all cost management deliverables., • Take ownership of the cost control function and ensure integrity of the cost and forecast reporting. Requirements • Knowledge of project development stages, procurement, project controls, and construction execution practices is required., • Working knowledge of applicable computer software such as PMWeb or similar project portfolio management software, DataServ, Excel, JD Edwards, or related software programs., • Effective problem-solving skills., • Results oriented and deliver on customer commitments., • PMP certification desirable. Some Things You Should Know • Our clients and projects are nationwide – Travel will be required., • No other builder can offer the collaborative design-build approach that Clayco does., • We work on creative, complex, award-winning, high-profile jobs., • The pace is fast!, • This position is classified as a safety-sensitive role in accordance with applicable state and federal laws. Candidates selected for this position will be subject to a comprehensive background check, which includes mandatory drug testing. Why Clayco? • 2024 Best Places to Work – Chicago Business Journal, St. Louis Business Journal, Los Angeles Business Journal, and Phoenix Business Journal., • 2024 ENR Midwest – Midwest Contractor (#1)., • 2024 ENR Top 100 Design-Build Firms – Design-Build Contractor (Top 5)., • 2024 ENR Top 100 Green Contractors – Green Contractor (Top 5). Benefits • Discretionary Annual Bonus: Subject to company performance and individual contribution., • Comprehensive Benefits Package Including: Medical, dental and vision plans, 401k, generous PTO and paid company holidays, employee assistance program, flexible spending accounts, life insurance, disability coverage, learning & development programs and more! Compensation • The salary range for this position considers a wide range of factors in making compensation decisions including but not limited to: Education, qualifications, skills, training, experience, certifications, internal equity, and location. Compensation decisions are dependent on the facts and circumstances of each case.

About the Company The Cabin Rebrand team is tasked with transforming aircraft’s Cabin Interiors, upgrading the appearance to match the new Brand Standard. About the Role This role will directly support the conversion of the product via Engineering Work Packages. Responsibilities • Support maintenance and other departments in the execution of the above tasks., • Authoring and where applicable checking engineering documents associated with the above tasks, such as ER/A’s (Engineering Repair/ Authorization), AA’s (Action Authorizations), AMDS (Aircraft Maintenance Document System) work cards, Engineering Drawings (CAD) etc., • Substantiating the airworthiness/regulatory compliance of engineering documents., • Maintaining compliance with applicable FAA, DOT, ICAO, FCC, OSHA regulations and organization's Technical Operations Policy and Procedures (TOPP) pertaining to the above responsibilities., • Practices safety-conscious behaviors in all operational processes and procedures. Qualifications • 3+ years of experience as Cabin Rebrand Engineer or Cabin Engineer with below highlighted experience is mandatory., • BE in Electrical / Mechanical / Aeronautical engineering is must. Required Skills • Development, design, and production of programs, repairs, inspections, and alterations related to aircraft interiors, including cabin commodities such as seats, lavatories and galleys., • Maintaining compliance with applicable FAA, DOT, ICAO, FCC, OSHA regulations and organization's Technical Operations Policy and Procedures (TOPP) pertaining to the above responsibilities., • Collaborating with Maintenance, Planning, Engineering and Materials teams for coordination of programs, repairs, and modifications., • Familiarity with FAR's and DOT regulations related to cabin components, materials, finishes and flammability requirements is preferred., • Familiarity with Aircraft Maintenance Manuals and associated technical documentation is preferred., • Familiarity with STC and ODA certification processes is desired., • Previous experience with commercial airline, military, OEM or MRO is desired., • Knowledge of enterprise aviation maintenance and operations systems (e.g., AMDS, Insight, OTIS, EARTH, SCEPTRE, or similar platforms) is desired., • Primarily based in office. Access to A/C on the active flight line, in the hangar and on site at MRO facilities will be expected. Minimal hazards/exposure expected. Preferred Skills • Previous experience with commercial airline, military, OEM or MRO is desired., • Knowledge of enterprise aviation maintenance and operations systems (e.g., AMDS, Insight, OTIS, EARTH, SCEPTRE, or similar platforms) is desired.

Job ID: 521924 Exempt Oldcastle Infrastructure™, a CRH company, is the leading provider of utility infrastructure solutions for the water, energy, and communications markets throughout North America. We’re more than just a manufacturer of precast concrete, polymer concrete, or plastic products. We’re a trusted and strategic partner to engineers, contractors, distributors, specifiers, and more. With our network of more than 80 manufacturing facilities and more than 4,000 employees, we’re leading the industry with innovation and a safety-first mindset. Job Summary The Stormwater Solutions Engineer III will work with specifying Engineers and Contractors to develop unique design solutions, ensuring that project BMPs meet the regulatory-guided stormwater and treatment requirements. Solutions Engineers proactively engage with the area sales teams to establish and build relationships with the civil engineering customers, to function as a technical resource to the Customer and Engineers, and to meet the commercial objectives of the company. Job Location • This position is remote based in the United States. Job Responsibilities • Determine and develop most effective site solution utilizing a suite of Stormwater product offerings, • Present project-specific solutions to civil engineering specifiers, • Provide design calculations and drawings for integration into civil engineering plans to secure product solutions on site plans, • Respond to civil engineers on project-specific inquiries and industry questions including local stormwater regulations, • Establish and maintain rapport with civil engineer specifiers, • Support area and internal team members to achieve team goals, • Assist sales team during the project bid phase by providing design review and confirming appropriate product solution design, • Partner with local manufacturing facilities to drive standard designs with focus on utilization of available form assets, • Provide project and technical support for submittal drawings, calculations, regulatory approvals, production, and product delivery, • Maintain engineering standards and procedures for the team, • Recording project information accurately, • Other duties as assigned Job Requirements • Bachelor’s Degree in Civil Engineering, • 4+ years experience with solid technical background in drainage design, water resources, land development, or similar field, • Ability to prepare and review standard engineering documentation and plans, • Capable of interpreting and executing regulatory-guided site design requirements, • Strong analytical and problem-solving skills, • Excellent communicator and organized, • Enthusiasm and passion for the business and achieving organizational goals, • Collaborator with ability to share thoughts openly, accept new ideas, and get the job done in a highly interactive process, • Average lead time by deliverable, • Backlog management, • Specification rate within area, • Professional Engineering License (Preferred), • Experience with: AutoCAD, BIM, SWMM, Microsoft Office, HydroCAD (Preferred) Compensation • Target salary is $90,000.00 to $105,000.00, • Yearly 10% target bonus eligible, • 401(k) plan / group retirement savings program, • Short-term and long-term disability benefits, • Life insurance, • Health, dental, and vision insurance, • Paid time off, • Paid holidays What CRH Offers You • Highly competitive base pay, • Comprehensive medical, dental and disability benefits programs, • Group retirement savings program, • Health and wellness programs, • An inclusive culture that values opportunity for growth, development, and internal promotion About CRH CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of a large international organization. If you’re up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest! Oldcastle Infrastructure, a CRH Company, is an Affirmative Action and Equal Opportunity Employer. EOE/Vet/Disability CRH is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or any other characteristic protected under applicable federal, state, or local law. AI tools may be used in certain stages of the employment lifecycle, such as candidate review; however, all final employment decisions will be made by a person.

Join this growing Company in the recycling of plastics through the build-out of new plants. Continuous Process in a PSM regulated environment is what you will need to be successful in this role. Corporate role on site in Atlanta, GA. One plant operational, 2nd plant coming online this year and more in the works! Role Overview Our client is seeking an experienced Senior Electrical / Controls Engineer to join their team and support the development of engineering and construction packages for facility expansion and buildouts. The role will be the primary lead on specification and procurement of instrumentation related to process control, process indication, and control system infrastructure. This role reports to Company Electrical Engineering Manager. Responsibilities • Assist with the design and modification of new and existing process control and instrumentation systems., • Specify both discrete, analog, and networked control solutions., • Prepare specifications, design-bid documentation, and construction estimates., • Review supplier designs against licensor requirements, code requirements, and customer requirements. • Develop instrumentation standards to ensure selection compliance across multiple facilities., • Develop maintenance procedures for instrumentation and control systems., • Develop inspection plans for instrumentation and control systems., • Develop commissioning plans for projects and system upgrades as required., • Make recommendations for additional equipment as necessary., • Participate in the review of Management of Changes, PHA Action Requests, Construction Information Requests, and Change Order Requests. • Experience in continuous process manufacturing in all the following project phases: documentation, detailed design generation, implementation, system integration, testing and on-site, startup, using PSM (Process Safety Management) elements and Industrial standards. • Assist with local, state, and federal permitting applications., • Potential to travel to other Nexus locations or vendor locations for meeting or Factory Acceptance Testing (FAT) as required (~10%). • Design and specify 480V distribution infrastructure, motor control centers, VFD panels, PLC panels, RIO panels, and other control panels. • Assist with local, state, and federal permitting applications. Education • BS in Electrical Engineering or extensive documented experience in lieu of engineering degree. Experience • 10+ years previous experience developing PLC programs, using multiple vendor hardware, for process and discrete controls. Rockwell ControlLogix (primarily), Codesys, Siemens TIA Portal. • 7+ years designing electrical control, motor control and heater control panels., • 7+ years’ experience using AutoCAD Electrical., • 7+ years of field installation / construction experience, • Strong background and understanding of P&ID drawings., • Knowledge and experience with applicable NEC, UL / CSA standards for electrical equipment & Electrical construction best practices. • Previous experience with PSM-covered facilities., • Previous experience working with Management of Change (MOC) and Continuous process Improvement programs. • Experience with multiple industrial communication protocols, i.e. Ethernet I/P, Modbus TCP / RTU, Profibus / Profinet, etc. • Industrial Power distribution systems to 480 VAC., • Exposure to Medium Voltage power distribution (4160 VAC or higher). Knowledge, skills, and abilities • Self-starter with strong initiative., • Entrepreneurial spirit and attitude., • Ability to manage multiple projects on different timelines., • Comfortable in a fast-paced, purpose-driven, collaborative environment., • Experience working with multiple outside engineering groups., • Demonstrate a strong desire to learn manufacturing processes. Must be authorized to work in the USA without the need for sponsorship now or in the future.

Direct Hire Opportunity! Senior Automation & Controls Engineer - Food & Beverage Qualifications: • Bachelor Degree in Controls, Electrical, Mechanical or Chemical Engineering or related degree from an ABET accredited program and successful completion of Fundamentals of Engineering (FE) exam and 7 years electrical engineering experience, • EPC project and Automation 7 Controls experience preferred, • Master Degree in Electrical Engineering and 6 years electrical engineering experience, • EPC project experience preferred, • Expert knowledge in standard engineering techniques and procedures, • Strong knowledge of electrical equipment design ANSI and IEEE Standards. Strong computer skills (e.g. Microsoft Office Suite), • Excellent written and verbal communication skills, • Experience with leading the discipline design for large projects and delegating work tasks to team members, • Ability to lead execution of work and resolve issues in a team environment, • Demonstrated critical thinking skills, ability to work methodically and analytically in a quantitative problem-solving environment, • Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills, • Ability to perform quality reviews for detailed engineering documents and specifications, • Ability to travel. accredited program, • Must have or be able to obtain a Transportation Worker Identification Card (TWIC), • Professional Engineer (PE) License Preferred, • This position requires an individual capable of applying intensive and diversified knowledge of principles and practices to broad areas of assignment, • Must be capable of devising new approaches to problems encountered, • Ability to perform quality reviews for detailed engineering documents and specifications, • Knowledge of applicable design standards covering Automation & Controls Design/Engineering such as NFPA, ISA, IEC, IEEE, ISA/IEC 61511, ISO13849, UL508A, • Experienced with variety of control and safety systems (PLC, SCADA, SIS, BMS, DCS), • Experience in Rockwell and Siemens PLC platform. Experience in GE, Modicon, Opto22, Mitsubishi, and Triconex PLC platforms a plus, • SCADA experience with Factory Talk and Wonderware local and distributed systems, Ignition Software is a plus, • MES Design and Implementation Experience a Plus, PTC ThingWorx, Ignition/Sepasoft, Parsec TrakSYS, • Machine safety risk assessment and required PL design compliance to ISO13849 is a plus, • Process safety SIF/SIS design compliance to ISA/IEC 61511 is a plus, • Experience with PlantPAX and PackML is preferred, • Familiarity with tools like SISTEMA, CCW, IAB, BatchSIM, and PlantSIM is desired Senior Automation & Controls Engineer - Food & Beverage Description: • Responsible for compliance with company and project site safety policies, • Design responsibility for all Automation and Controls scope on the project, • Leads a team of Automation and Controls Engineers, Specialists, and Designers in the execution of design, • Interfaces with a multi-faceted project team internally consisting of project manager, electrical, controls, estimating, procurement, construction, and other engineering disciplines, • Responsible for leading and developing software design deliverables including PLC and HMI programming design deliverables as well as Batch, MES, servers and virtualization, • Responsible for commissioning and startup of those design deliverables, • Lead and prepare controls design deliverables, including instrument/device list, I/O list, controls narratives, control panel and controls hardware design, device location plan drawings and installation details, • Lead the specification, design, and procurement activities for control panel and equipment vendors, manage vendor progression, and lead the Factory Acceptance Tests (FATs), • Lead and prepare electrical design deliverables including 480VAC and below equipment and motor power design, installation plan drawings, and conductor schedules, • Determine process instrument measurements protocols, such as temperature, pressure, flow, level, analyzers, and control valves. Utilize knowledge of various technologies for selecting the appropriate controls application, • Experienced in reviewing P&IDs and working with process engineers to define and show proper controls scope of the project, • Develop and manage verification of design, calculations, project studies and report preparation, • Interfaces directly with offsite design office and coordinates and tracks execution of controls deliverables to that office, • Responsible for leading and performing quality reviews of project design submittals and coordinating those reviews within the department, • Responsible for applying knowledge of commonly used automation and controls engineering/design concepts, principles, practices, codes, and procedures within the engineering services industry, • Interfaces directly with construction personnel in development of contracts and execution of work, • Develops project estimates at each project phase through various software such as Proposal works, Integrated Architecture Builder (IAB), SIL Solver, Bluebeam, Excel, and Visio, • Supports project manager in the development and tracking of automation and controls project budgets and expected progress, • Works with clients and vendors directly in developing design, • Builds effective relationships with existing clients, customers and contractors and develop new business opportunities, • Responsible for ensuring customer satisfaction goals and expectations are met, • Has a list of clients that frequently request them for projects or assistance, • Provides leadership, technical direction and development to Automation and Controls team members, • Assists in the day-to-day allocation of resources to their projects, • Coordinate with field personnel to resolve design related installation issues, calculations, field inspections and testing of controls systems, • Responsible for leading the technical execution and team during onsite start-up and commissioning activities, • Responsible for developing and submitting discipline change notices as needed to the project management team, • Fully understands and can execute the EPC project approach, • This position will require making trips to job sites to survey, support installations, and lead startups (travel about 30%), • Work with our business development team to identify and develop key project and customer pursuits, • Frequently attends and hosts client events, • Develops business strategies for future projects, • Understands business needs and profitability factors, • Reviews and develops engineering hour estimates and proposals for all phases of the project, • Supports interviewing and hiring process for new team members, • Coordinates workload with Automation and Controls Department Manager, • Complies with all company policies and standards, • All other duties as assigned

🚨 We’re hiring: Transmission Department Manager (T&D Engineering | Southeast Region) We’re partnered with a leading engineering consultancy delivering large-scale transmission and power delivery projects across the U.S. As their Southeast team continues to grow, we’re hiring a Transmission Department Manager to lead engineering delivery, develop high-performing teams, and drive regional growth. ✨ What’s on offer: • Lead and grow a regional transmission engineering team, • High-impact leadership role with visibility across national and global operations, • Influence strategy, project delivery, and business growth, • Work on complex transmission infrastructure projects across the U.S. and internationally, • Competitive salary, bonus, and long-term career progression into senior leadership 🧠 What you’ll be doing: People Leadership & Development • Lead, mentor, and develop a high-performing team of engineers and designers, • Partner with HR and recruiting to attract, hire, and onboard top talent, • Guide career development and progression within the T&D organization, • Conduct performance reviews and implement development plans, • Identify training needs and support targeted development programs, • Foster a culture of safety, ownership, innovation, and teamwork Project Execution & Technical Excellence • Serve as a senior technical advisor across transmission projects, • Monitor project performance across quality, schedule, and budget, • Drive adoption of tools, technologies, and engineering best practices, • Support proposal development and QA/QC processes, • Align with global teams on staffing, delivery, and technical direction Strategic Planning & Business Growth • Contribute to regional strategy, planning, and growth initiatives, • Support business development, proposals, and client engagement, • Partner with marketing and account teams to win new work, • Represent the business at industry events and conferences, • Promote innovation and continuous improvement initiatives Cross-Regional & Organizational Alignment • Collaborate with regional and national leadership on best practices, • Align teams across offices on standards, tools, and delivery approach, • Support integration of global engineering resources, • Assist with resource planning and workload distribution Operational & Quality Oversight • Ensure compliance with quality management systems and QA/QC standards, • Drive continuous improvement across project delivery processes, • Support implementation of project management tools and systems, • Contribute to development of EPC and program management capabilities 🔍 Who we’re looking for: • Bachelor’s degree in Engineering, Construction, or related field, • 7+ years of experience in transmission and distribution consulting, • Background in engineering design and or project management, • Proven leadership experience managing technical or engineering teams, • Experience mentoring and developing staff, • Strong communication, collaboration, and leadership skills, • Familiarity with project management tools and methodologies, • Track record of successful project delivery and financial performance 💡 Preferred experience: • 10+ years of industry experience, • Professional Engineer (PE) and or PMP certification, • Experience with tools such as EcoSys, Microsoft Project, Power BI, • Business development experience including proposals and client engagement, • Experience working in multi-office or matrixed organization 📍 Location: Southeast U.S. 📩 Interested? Apply now or reach out directly to discuss:

Job Title: Cabin Rebrand Engineer Location: Atlanta , Georgia Duration : Full Time Job Summary The Cabin Rebrand Engineer will be part of the Cabin Rebrand team responsible for transforming aircraft cabin interiors to align with updated brand standards. This role supports the engineering conversion process through development and execution of Engineering Work Packages. The position involves design development, regulatory compliance validation, documentation, and implementation of cabin interior upgrades. Key Responsibilities • Develop, design, and produce engineering programs, repairs, inspections, and alterations related to aircraft cabin interiors, including:, • Seats, • Lavatories, • Galleys, • Support maintenance and operational departments in executing cabin modification tasks., • Collaborate with Maintenance, Planning, Engineering, and Materials teams to coordinate programs, repairs, and modifications., • Author and review engineering documentation such as:, • Engineering Repairs/Authorizations (ER/A), • Action Authorizations (AA), • AMDS work cards, • Engineering drawings (CAD), • Substantiate airworthiness and regulatory compliance of engineering documents., • Ensure compliance with applicable FAA, DOT, ICAO, FCC, OSHA regulations and Technical Operations Policy and Procedures (TOPP)., • 4–8 years of relevant experience in commercial airline, military, OEM, or MRO environments (preferred)., • Bachelor’s degree in Mechanical, Aerospace, Electrical Engineering (preferred but not mandatory). Equivalent experience will be considered., • Familiarity with:, • FARs and DOT regulations related to cabin components, materials, finishes, and flammability., • Aircraft Maintenance Manuals and associated technical documentation., • STC and ODA certification processes., • Enterprise aviation maintenance systems (AMDS, Insight, OTIS, EARTH, SCEPTRE, or similar)., • Strong problem-solving skills and ability to develop comprehensive action plans., • Excellent written and verbal communication skills., • Ability to work cross-functionally with internal teams, external suppliers, and regulatory agencies., • Primarily office-based., • Required access to aircraft on active flight lines, hangars, and MRO facilities., • Minimal hazard exposure expected.

About the Company Chief Engineer is responsible for the effective daily leadership of his/her staff, managing the engineering program to the highest level of quality work and customer service as well as the administration of the engineering department in alignment with the management team, the C&W engineering platform, and client expectations. The Chief Engineer will perform at the highest of ethical standards, reflecting the core values of C&W as defined in its Business Code of Conduct, Policies and Procedures Manual, and other related company policies. About the Role Responsible to plan, implement, coordinate, and supervise all mechanical operations, maintenance, communications, energy management, and manpower development programs for assigned properties. The Chief Engineer may be required to perform limited hands on operational duties and is not precluded from performing Watch Activity. Responsibilities • Supervise engineers and maintenance staff including hiring, training, personnel development, etc., • Ensure performance management, coaching, and development of team members through established HR processes and disciplinary actions., • Participate and coordinate annual scheduling and execution of the C&W Safety Program as directed by Asset Services, Engineering Leadership, EH&S Administration, and so forth. Responsible for 100% Compliance at his/her site., • Manage operational accounts for building, including variance reporting, as required and assist in development of operating and capital budgets., • Utility Management such as tracking use, consumption, cost, reporting, comparison models, sub-metering, budgeting, variances as directed by Management and/or Leadership., • Conduct regular inspections of building systems and equipment; identify and resolve issues., • Assist in maintenance/engineering issues as required., • Recommend and implement improvements for preventive maintenance programs on an ongoing basis., • Develop, implement, and maintain an effective preventive and predictive maintenance program for task scheduling, routines, and performance. Program to include procedures for annual, semi-annual, quarterly, monthly and other scheduled maintenance as provided by the manufacturer’s recommendations and/or industry best practices., • Develop and maintain effective building-specific maintenance and safety procedure manuals., • Coordinate development of and/or maintain an Operations Document Library, including but not limited to construction plans, structural plans, as-built drawings, MEP schedules, line diagrams and schematics, equipment and operation manuals, start up and commissioning documents, and equipment warranties., • Formulate and conduct building-related systems and equipment training., • Coordinate maintenance efforts with outside contractors, tenant finish personnel, and engineers., • Oversee all building systems including fire/life safety, plumbing, HVAC, and electrical issues; must remain current with latest HVAC technology trends., • Maintain ongoing communication with tenants, clients, property management, and vendors., • Develop specifications and assist in solicitation, administration, execution and performance of maintenance/ repair service contracts., • May assist in solicitation and acquisition of new management contracts., • Respond to all emergency situations quickly (fire, evacuation, equipment failure etc.) and customer concerns., • Implement and administer inventory control programs, purchase parts and supplies., • Ensure compliance with applicable codes, requisitions, government agency, and company directives as relates to building operations. Qualifications • High School Diploma or GED Equivalent Required Skills • 7+ years of related work experience in a commercial property setting or any similar combination of education or experience., • Vocational/Technical training certificate., • Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses., • Universal EPA certification preferred., • Financial knowledge necessary for reading and understanding budgets, budget variances and basic reporting as required by management., • Familiar with Energy Management System (EMS)/programming and fire alarm systems., • Basic Computing Skills in Outlook, Excel & Word. Preferred Skills • Communication Proficiency (oral and written)., • Interpersonal Skills., • Organization Skills., • Technical Proficiency., • Leadership. Pay range and compensation package [Pay range or salary or compensation] Equal Opportunity Statement We are committed to diversity and inclusivity in our hiring practices.

Title: Field Service Engineer Location: Atlanta, GA (Remote / Regional Travel) Type: Direct Hire Salary: $38–$45 per hour Benefits: Full Employee Benefits Package that includes paid time off with blackout periods, paid holidays, 3 medical plans to choose from, dental & vision plans, 401(k), and an Employee Stock Ownership (ESOP) plan. OT at 1.5x, Company Credit Card (gas, food, parking), 401(k) The Field Service Engineer provides onsite technical support for power distribution equipment used in mission-critical environments such as data centers. This role performs troubleshooting, repair, commissioning, and maintenance on low-voltage gear and related systems while delivering excellent customer service. Job Duties: • Provide onsite troubleshooting, repair, maintenance, and commissioning for low-voltage distribution gear, transformers, and related power systems., • Perform break/fix work at customer locations and ensure equipment reliability., • Read and interpret electrical schematics, technical drawings, and system documentation., • Use test equipment such as multimeters, current meters, and diagnostic tools., • Conduct preventive and corrective maintenance on electrical distribution and monitoring systems., • Prepare detailed service reports, test sheets, and documentation., • Attend onsite customer meetings and communicate regularly with Project Managers., • Ensure compliance with site-specific and company safety regulations., • Maintain tools, spare parts, consumables, and equipment in proper working condition., • Support installation supervision and commissioning of new equipment., • Escalate customer concerns and technical issues appropriately., • Identify areas for improvement to eliminate waste and add value. Qualifications: • Associate degree in Electrical Power Distribution or related field, or 5+ years of relevant electrical experience., • 3–5 years of experience with electrical power distribution systems, AC/DC systems, or power monitoring equipment., • Understanding of low-voltage switchgear, transformers, and distribution equipment., • Ability to read and interpret electrical schematics and technical diagrams., • Experience using electrical test equipment such as multimeters and current meters., • Data center or mission-critical experience preferred., • Military experience strongly preferred., • Knowledge of UL standards (UL67, UL1008, UL891, UL1558, etc.) is a plus., • Excellent customer service, communication, and interpersonal skills., • Valid driver’s license and willingness to travel as required.

As the Chief Critical Infrastructure Engineer, you will serve as the technical leader responsible for ensuring continuous uptime, optimal performance, and operational excellence across our data centers. Acting as a key decision-maker and subject matter expert, you will drive best practices, manage critical systems, and set the strategic direction for all infrastructure operations to guarantee world-class reliability for our customers. Key Responsibilities • Process & Standards Leadership: Establish, review, and enhance operational processes, standards, Methods of Procedure (MOPs), and Standard Operating Procedures (SOPs) to ensure consistency, quality, and compliance., • Strategic Project Implementation: Oversee the planning and execution of infrastructure projects and customer solutions, including the allocation and preparation of space, power, and networking resources., • Technical Operations Oversight: Manage all aspects of technical facility operations, including power systems, HVAC, UPS, generators, mechanical systems, and critical environment controls., • Performance Analysis: Prepare, analyze, and present monthly operational metrics, facility performance data, and technical status reports to leadership and stakeholders., • Customer Integration & Support: Provide expert technical guidance and hands-on support for integrating and implementing customer solutions, ensuring seamless onboarding and continued operational success., • Incident Management: Take command of problem resolution and emergency response activities, ensuring prompt resolution and minimal impact to facility uptime., • Team Leadership: Supervise, mentor, and develop engineering and facility staff, fostering a culture of accountability, safety, and continuous improvement., • Compliance & Best Practices: Ensure the facility’s operations adhere to industry best practices and regulatory standards (ISO 9000, ISO 14000, OHSAS 18000), and champion ongoing improvement initiatives. Qualifications • 7+ years of progressive experience in data center facility operations, critical infrastructure management, or related mission-critical environments., • Proven leadership and supervisory experience with technical teams., • Bachelor’s degree in Engineering, Facilities Management, or a related technical field; equivalent combination of education, training, and experience considered., • Expert knowledge of mission-critical systems such as UPS, generators, power distribution equipment, mechanical and HVAC systems, and Building Management Systems (BMS)., • Demonstrated understanding of industry codes, regulations, safety standards, and quality management systems (incl. ISO 9000, ISO 14000, and OHSAS 18000)., • Strong analytical and problem-solving skills; able to manage multiple priorities under tight deadlines., • Exceptional verbal and written communication and technical presentation skills., • High proficiency in developing proposals, operational documentation, and technical reports. Compensation & Benefits • Competitive salary [Insert Range if Preferred], • Comprehensive Health, Dental, and Vision Insurance, • Short-Term and Long-Term Disability Insurance, • Company-paid Life Insurance, • 401(k) with company match, • Paid Time Off and Paid Holidays

Position: MEP Manager, Electrical Location: Atlanta, GA Job Id: 701 of Openings: 1 TITLE: MEP MANAGER, ELECTRICAL LOCATION: Atlanta, GA POSITION SUMMMARY: The MEP Manager, Electrical will lead efforts coordinating the Electrical trades on major construction projects and work with the Project Team to ensure successful installation and completion of all MEP trade work. ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Estimate and scope MEP trades during pre-construction (as applicable / future support) * Review Contract Documents, making suggestions/modifications as they relate to the MEP trades and approved construction drawings and specifications * Review BOD for MEP compliance * Review and coordination of submittals and shop drawings * Act as Energy Marshall in the isolation and energization of all electrical equipment in accordance with the safety plan. * Assist Superintendent and Field Staff in managing MEP subcontractors throughout duration of the project (from groundbreaking through commissioning and turnover to owner) * Assist with scheduling MEP installation activities * Review, inspect, and provide oversight of construction drawings during MEP installation * Work with Superintendent on project logistics and temporary facility plans * Review and comment on scope, material, and equipment for MEP systems prior to installation * Monitor the installation and start-up of MEP systems and commissioning of project with Engineer & Owner * Inspect MEP installation during construction. * Review Coordination and Arc Flash studies * Review and provide field verification of torque and meggar reports provide by trades, and assure reports are submitted during final turnover * Coordinate activities, materials procurement and other related activities with Project Superintendent and Field Staff * Communicate progress and prepare appropriate reports as needed (Procore) * Represent SE MCS regarding the MEP process at weekly Owners and contractors' meetings * Mentor project staff, if applicable * Lead and direct the coordination process to resolve all conflicts during installations and start-up * Perform other duties as assigned. * Significant local travel (within ATL region) required for this role - 70%-100% *Schedule shifts may incl nights/weekends as per bell curve requirements QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience (Desired): * Bachelor's/Associates Degree a plus or comparable experience in mechanical, electrical or fire protection/life safety engineering, construction management. * Construction trade specific experience with increasing levels of responsibility and demonstrated abilities to direct the work of others. Must be a US Citizen Computer Skills: * Proficient in Microsoft Office or related software, Procore preferred Certificates and Licenses: * Master Electrical License preferred * OSHA 30 preferred Supervisory Responsibilities: * Supervises subordinate employees. Carries out supervisory responsibilities in accordance with the organization's policies and applicable laws. Responsibilities include interviewing, hiring, and training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Occasionally lift and/or move up to25pounds, and ability to bend, stoop, kneel, crouch, or crawl. Frequent use of hands to fingers, and ability to reach with hands and arms. Specific vision abilities required include close vision, ability to adjust focus, and ability to see color. Requires eye-hand coordination and manual dexterity sufficient to operate office equipment. Requires normal range of hearing and eyesight to record, prepare and communicate written or online documentation. Involves contact withother individuals. Frequent sitting, standing, and walking. Work is performedprimarilyindoors. The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor. CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status. CPG Participates in E-Verify Pay Range: $113,752 - $170,661 per year Apply for this Position

Senior Engineer Level 2 - EV (Einfochips Inc) We are seeking a motivated and detail-oriented Test Engineer to join our growing team focused on electric vehicle (EV) charging technologies. In this role, you will support the development, validation, and verification of EV charging systems, ensuring they meet performance, safety, and compliance standards. This is an exciting opportunity to contribute to the future of sustainable transportation. What You'll Be Doing: • Assist in the design and execution of test plans for EV charging hardware and software systems., • Set up and maintain test environments including power electronics, communication interfaces (OCPP, ISO 15118), and vehicle simulators., • Perform functional, regression, and stress testing on EVSE (Electric Vehicle Supply Equipment)., • Document test procedures, results, and anomalies in a clear and organized manner., • Collaborate with design, firmware, and systems engineering teams to troubleshoot and resolve issues., • Support compliance testing for industry standards (e.g., UL, IEC, SAE)., • Contribute to continuous improvement of test processes and automation frameworks. What We Are Looking For: • Bachelor’s degree in Electrical Engineering, Computer Engineering, or a related field., • 5-10 years of experience in a testing or validation role., • Familiarity with test equipment such as oscilloscopes, multimeters, and power analyzers., • Basic understanding of EV charging protocols and power systems is a plus., • Experience with scripting languages (e.g., Python, MATLAB) for test automation is desirable., • Strong analytical and problem-solving skills., • Knowledge about EV charging system and technology in term of Hardware and system., • Knowledge about mixed signal design (electrical point of view), • Design the embedded product like EV charger or similar high power, • Knowledge about component level testing , system level testing and product level testing, • Knowledge about pre-compliance and certification testing, • Exposure to EVSE or automotive systems testing., • Knowledge of communication protocols such as CAN, Modbus, or Ethernet., • Work on cutting-edge technology in a fast-growing industry., • Be part of a collaborative and innovative engineering team., • Opportunities for career growth and professional development., • Competitive compensation and benefits package. What’s In It for You: At Arrow, we recognize that financial rewards and great benefits are important aspects of an ideal job. That’s why we offer competitive financial compensation, including various compensation plans and a solid benefits package. • Medical, Dental, Vision Insurance, • 401k, With Matching Contributions, • Short-Term/Long-Term Disability Insurance, • Health Savings Account (HSA)/Health Reimbursement Account (HRA) Options, • Paid Time Off (including sick, holiday, vacation, etc.), • Tuition Reimbursement, • Growth Opportunities, • And more! Work Arrangement Fully OnSite: Must be able to travel to an Arrow Client office location as requested by Arrow Client leadership. Location: Complete On-Site at US-GA- Atlanta (Day-1 Onsite) About eInfochips: eInfochips, an Arrow company (Fortune #154), is a leading global provider of product engineering and semiconductor design services. A rich history of over two decades, with over 500+ products developed and 40M deployments in 140 countries, eInfochips continues to fuel technological innovations in multiple verticals. eInfochips has strategic technology partnerships with Qualcomm, NVIDIA, NXP, Analog Devices, Texas Instruments, Amazon, Microsoft and Google to name a few. Along with Arrow’s $38B in revenues, 22,000 employees, and 345 locations serving over 80 countries, eInfochips is primed to accelerate connected products innovation for 150,000+ global clients. eInfochips acts as a catalyst to Arrow’s Sensor-to-Sunset initiative and offers complete edge-to-cloud capabilities for its clients. Please visit for our portfolio of product engineering services across various industries & verticals. EEO Statement: Arrow is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, gender, age, sexual orientation, gender identity, national origin, veteran or disability status. (Arrow EEO/AAP policy) US-GA-Atlanta-Georgia (Heliox/Siemens Business)) Full timeEngineering Services Arrow is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, gender, age, sexual orientation, gender identity, national origin, veteran or disability status. ___ All Arrow job postings are for existing job vacancies. We anticipate this requisition will be open for a minimum of five days, though it may be open for a longer period of time. We encourage your prompt application.

Technical Manufacturing Account Executive An emerging leader in industrial AI solutions is transforming how manufacturing teams leverage real-time insights from their production floors. They are actively seeking a driven and tech-savvy Technical Manufacturing Account Executive to lead complex sales cycles in high-tech environments. This opportunity offers the chance to work with cutting-edge Vision AI platforms used to improve operational efficiency, product quality, and safety standards in industrial settings. This role is ideal for someone passionate about innovation in manufacturing and confident in leading technical conversations without the support of a Sales Engineer. You’ll serve as a trusted advisor to operations, quality, and plant management teams as they digitize their facilities. About the Role: • Own and manage full sales cycles from outreach and discovery to demo, negotiation, and close., • Conduct in-depth discovery with plant-level stakeholders including quality, operations, and engineering teams., • Deliver impactful demos of an AI-based vision platform that’s improving factory floor visibility., • Translate technical capabilities into measurable business outcomes and operational improvements., • Navigate complex, multi-site buying groups in industrial environments., • Maintain and build a strong, predictable sales pipeline through consultative selling and pipeline hygiene., • Travel as needed to client manufacturing sites across the U.S. and Canada. About You: • 5+ years of experience in quota-carrying B2B sales roles, ideally involving technical or consultative selling., • Experience working with manufacturing clients or within industrial verticals., • Strong understanding of how to articulate technical solutions in business terms without relying on a Sales Engineer., • Skilled at building trust and credibility with technical audiences and decision-makers., • Familiarity with AI, computer vision, factory automation, or edge computing., • Experience selling without dedicated presales or technical support., • Technical education, hands-on engineering experience, or prior exposure to industrial software systems. About Blue Signal: Blue Signal is an award-winning, executive search firm specializing in various specialties. Our recruiters have a proven track record of placing top-tier talent across industry verticals, with deep expertise in numerous professional services. Learn more at bit.ly/46Gs4yS

Job Title: Manufacturing Engineer Location: Atlanta, GA On-site Job Type: Full-time Department: Production Min Experience: 3+ Years As the Manufacturing Engineer you will be responsible for designing, improving, and supporting hand-assembly manufacturing processes for electronic IOT cameras and video products, solar power systems and mounting solutions to provide documentation and security services for construction sites. This role focuses on process optimization, work instructions, tooling, quality, and throughput while ensuring safe, repeatable, and cost-effective production. The ideal candidate will have a strong technical background, experience in hand assembly environments, and a track record of driving continuous process efficiency and improvements. Company Description: OxBlue, part of Hexagon, is a leading global provider of construction time-lapse and live streaming video camera services. Since 2001, OxBlue’s has helped owners, general contractors and industry professionals capture, understand and share construction progress with ease. Using high-definition cameras, artificial intelligence features and an easily accessible interface, OxBlue provides effortless access to real-time accurate and actionable data. Based in Atlanta, Georgia, we’ve helped more than 5,900 clients across 45 countries manage, monitor and market success on the jobsite. You Will: • Develop and maintain assembly processes for hand-built electronic products (PCB assemblies, cable assemblies, final system integration)., • Leads the quality and reliability team by analyzing field, return, and customer support data to identify systemic issues and failure modes. Drives cross-functional root cause analysis and prioritizes issues based on customer impact and risk. Helps to determine and validate corrective actions, establishes feedback loops into design and production, and drives continuous improvement to enhance product reliability and overall customer experience., • Design and implement fixtures, jigs, and tooling to improve quality, productivity and ergonomics., • Identify, collect and work with Production Management Team to report on performance and quality metrics to ensure production is operating properly, • Help design and configure production management system to ensure accurate inventory tracking, serial tracking and operator and floor performance measurement., • Support new product introduction (NPI) from prototype through full production., • Identify and drive continuous improvement initiatives (lean manufacturing, waste reduction, defect reduction, time studies, process analysis, cost reductions)., • Create, modify and implement production floor, work cell and warehouse layouts to maximize space usage and efficiency, • Troubleshoot manufacturing and quality issues related to programming, mechanical assembly, and test processes., • Work closely with Hardware Engineering, Software Development and Production teams to ensure manufacturability., • Support test process development and integration into production., • Ensure compliance with ESD, safety, and quality standards (ISO, IPC, internal procedures)., • Identify opportunities to reduce product cost, consolidate product offerings and provide ROI analysis of opportunities, • Assist in defining and maintaining manufacturing BOMs and routings and perform BOM audits., • Create and update work instructions, and visual aids for operators and train operators and technicians on new processes and changes., • Coordinate with suppliers to ensure packaging and pallet systems protect product during shipment You Have: • Bachelor’s degree in Manufacturing Engineering, Mechanical Engineering, Electrical Engineering, or Industrial Engineering., • Experience in electronics manufacturing with hand assembly (wiring, enclosure integration, order fulfillment or receiving processes)., • Strong understanding of DFM/DFA principles., • Ability to read and interpret electrical schematics and mechanical drawings., • Experience creating work instructions and process documentation., • Familiarity with lean manufacturing and continuous improvement methods., • Ability to work on the production floor in a hands-on role. Bonus Points For: • Experience supporting low-to-medium volume, high-mix production., • Fixture or tooling design experience (SolidWorks or similar CAD tools)., • Experience with Lean Methodologies., • Experience in repair or refurbishment/remanufacturing processes and methodologies, • Experience at scale with cleaning tools or equipment, • Exposure to ISO 9001 or similar quality systems. Our Perks: • Health insurance paid 100% for employee and 50% for family, • Dental insurance paid 100% for employee, • 401k with company match, • A fun work environment: casual dress, free snacks, complimentary massages and great parties, • Investment in your professional development with internal promotions, continuing education and tuition reimbursement, • Paid sabbatical program: 4 weeks every 5 years, • An award-winning culture recognized for its high level of employee satisfaction, • Long-term disability paid 100% for employee, • Life/AD&D, • Paid parental leave The above summary of benefits is subject to change, is for informational purposes only, and does not create any contract rights to benefits. If you have what it takes and are looking for a company committed to the success of its clients and its people, we want to hear from you. Diversity and inclusion are important to OxBlue. We value the diversity of thought that comes from people of various backgrounds. Our continuous improvement and ability to serve our customers depend on creating a workplace that brings out the best in everyone. That’s why we are committed to continuing to create an atmosphere of positivity, happiness, and inclusion.

This Jobot Job is hosted by: Amanda Preston Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $65,000 - $100,000 per year A bit about us: Our client is a leading provider of clean energy products including smart battery systems, inverters, power converters, and building energy management solutions. They combine the pace and energy of a tech startup with the resources of a fast-growing Fortune 1000 company. We are seeking an experienced and adaptable Manufacturing Engineer to support our global product supply chain with engineering change management, technical drawing, 3D modeling, and communication with suppliers. The successful candidate will have experience with Solidworks, Product Lifecycle Management, sheet metal and plastics design for manufacturing, supplier quality evaluation, and contract manufacturing. Why join us? • Accelerated Career Growth!, • Competitive Base Salary and Bonus! Job Details Job Details: We are seeking a dynamic and experienced Welding Engineer to join our team. This is a permanent position in the manufacturing industry where you will be tasked with the responsibility of designing, implementing, maintaining, and improving welding applications. You will also be responsible for ensuring the highest quality of welding work is achieved and that it meets all the relevant safety and technical standards. Responsibilities: • Provide technical support to production staff and troubleshoot welding related issues., • Design and implement new welding processes or improve existing ones to enhance efficiency and profitability., • Conduct research and development activities to improve welding techniques, procedures, and applications., • Perform welding procedure and welder performance qualifications in accordance with required codes and standards., • Develop and implement welding standards and procedures to guide production and welding personnel in the manufacturing process., • Work closely with design and engineering teams to ensure the manufacturability of new designs and improve production processes., • Provide training and guidance to production staff on advanced welding techniques and technologies., • Collaborate with quality control teams to establish quality standards and specifications, and to ensure these standards are met., • Utilize CAD software to design and optimize welding fixtures and tooling., • Implement Lean manufacturing principles to improve efficiency and reduce waste., • Bachelor’s degree in Welding Engineering, Mechanical Engineering, or a related field., • A minimum of 2 years’ experience in a similar role within the manufacturing industry., • Strong knowledge of welding processes, procedures, and safety standards., • Proficiency in CAD software., • Experience with Lean manufacturing principles., • Experience with robotic and laser welding., • Ability to read and interpret blueprints and engineering plans., • Excellent problem-solving skills and attention to detail., • Strong communication and interpersonal skills., • Ability to work in a fast-paced, high-pressure environment., • Certified Welding Engineer (CWE) or Certified Welding Inspector (CWI) certification would be an advantage. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

DataBank Holdings Ltd. is a leading provider of enterprise-class data center, cloud, and interconnection services, offering customers 100% uptime availability of data, applications, and infrastructure. DataBank's managed data center services are anchored in world-class facilities. Our customized technology solutions are designed to help customers effectively manage risk, improve technology performance, and allow focus on core business objectives. DataBank is headquartered in the historic former Federal Reserve Bank Building, in downtown Dallas, TX. DataBank is proud to be an Equal Opportunity Employer. Our work culture at DataBank does not discriminate based on actual or perceived race, creed, color, religion, alienage or national origin, ancestry, citizenship status, age, disability or handicap, sex, marital status, veterans' status, gender, gender identity, gender expression, genetic information, sexual orientation, or any other characteristic protected by applicable federal, state, or local law. As the Chief Critical Infrastructure Engineer, you will serve as the technical leader responsible for ensuring continuous uptime, optimal performance, and operational excellence across our data centers. Acting as a key decision-maker and subject matter expert, you will drive best practices, manage critical systems, and set the strategic direction for all infrastructure operations to guarantee world-class reliability for our customers. • Process & Standards Leadership: Establish, review, and enhance operational processes, standards, Methods of Procedure (MOPs), and Standard Operating Procedures (SOPs) to ensure consistency, quality, and compliance., • Strategic Project Implementation: Oversee the planning and execution of infrastructure projects and customer solutions, including the allocation and preparation of space, power, and networking resources., • Technical Operations Oversight: Manage all aspects of technical facility operations, including power systems, HVAC, UPS, generators, mechanical systems, and critical environment controls., • Performance Analysis: Prepare, analyze, and present monthly operational metrics, facility performance data, and technical status reports to leadership and stakeholders., • Customer Integration & Support: Provide expert technical guidance and hands-on support for integrating and implementing customer solutions, ensuring seamless onboarding and continued operational success., • Incident Management: Take command of problem resolution and emergency response activities, ensuring prompt resolution and minimal impact to facility uptime., • Team Leadership: Supervise, mentor, and develop engineering and facility staff, fostering a culture of accountability, safety, and continuous improvement., • Compliance & Best Practices: Ensure the facility's operations adhere to industry best practices and regulatory standards (ISO 9000, ISO 14000, OHSAS 18000), and champion ongoing improvement initiatives., • 7+ years of progressive experience in data center facility operations, critical infrastructure management, or related mission-critical environments., • Proven leadership and supervisory experience with technical teams., • Bachelor's degree in Engineering, Facilities Management, or a related technical field; equivalent combination of education, training, and experience considered., • Expert knowledge of mission-critical systems such as UPS, generators, power distribution equipment, mechanical and HVAC systems, and Building Management Systems (BMS)., • Demonstrated understanding of industry codes, regulations, safety standards, and quality management systems (incl. ISO 9000, ISO 14000, and OHSAS 18000)., • Strong analytical and problem-solving skills; able to manage multiple priorities under tight deadlines., • Exceptional verbal and written communication and technical presentation skills., • High proficiency in developing proposals, operational documentation, and technical reports., • Competitive salary [Insert Range if Preferred], • Comprehensive Health, Dental, and Vision Insurance, • Short-Term and Long-Term Disability Insurance, • Company-paid Life Insurance, • 401(k) with company match, • Paid Time Off and Paid Holidays

___Job ID296870 LocationForest Park, Georgia Full/Part TimePart-Time Regular/TemporaryRegular ______ Overview Georgia Tech prides itself on its technological resources, collaborations, high-quality student body, and its commitment to building an outstanding and diverse community of learning, discovery, and creation. We strongly encourage applicants whose values align with our institutional values, as outlined in our Strategic Plan. These values include academic excellence, diversity of thought and experience, inquiry and innovation, collaboration and community, and ethical behavior and stewardship. Georgia Tech has policies to promote a healthy work-life balance and is aware that attracting faculty may require meeting the needs of two careers. About Georgia Tech Georgia Tech is a top-ranked public research university situated in the heart of Atlanta, a diverse and vibrant city with numerous economic and cultural strengths. The Institute serves more than 45,000 students through top-ranked undergraduate, graduate, and executive programs in engineering, computing, science, business, design, and liberal arts. Georgia Tech's faculty attracted more than $1.4 billion in research awards this past year in fields ranging from biomedical technology to artificial intelligence, energy, sustainability, semiconductors, neuroscience, and national security. Georgia Tech ranks among the nation's top 20 universities for research and development spending and No. 1 among institutions without a medical school. Georgia Tech's Mission and Values Georgia Tech's mission is to develop leaders who advance technology and improve the human condition. The Institute has nine key values that are foundational to everything we do: 1. Students are our top priority., 2. We strive for excellence., 3. We thrive on diversity., 4. We celebrate collaboration., 5. We champion innovation., 6. We safeguard freedom of inquiry and expression., 7. We nurture the wellbeing of our community., 8. We act ethically., 9. We are responsible stewards. Over the next decade, Georgia Tech will become an example of inclusive innovation, a leading technological research university of unmatched scale, relentlessly committed to serving the public good; breaking new ground in addressing the biggest local, national, and global challenges and opportunities of our time; making technology broadly accessible; and developing exceptional, principled leaders from all backgrounds ready to produce novel ideas and create solutions with real human impact. About the School of Electrical and Computer Engineering (ECE) at the Georgia Institute of Technology The School of Electrical and Computer Engineering (ECE) at the Georgia Institute of Technology is one of the largest producers of electrical engineers and computer engineers in the United States. Almost 2,600 students are enrolled in the School's graduate and undergraduate programs, and in the last academic year, 801 degrees were awarded. All ECE undergraduate and graduate programs are in the top five of the most recent college rankings by U.S. News & World Report. In addition to the main campus in Atlanta, Georgia, ECE also has permanent operations at Georgia Tech-Lorraine in France. Graduate students who spend at least one semester each at of the Georgia Tech locations (Atlanta, Lorraine, on two continents, North America and Europe) can earn the Georgia Tech Global Engineering Immersion Program (GEIP) Certificate when they receive the Georgia Tech M.S. degree. Over 110 ECE faculty members are involved in 11 areas of research and education: bioengineering, Forest Park, GA The National Electric Energy Testing, Research and Applications Center (NEETRAC) is looking for an Part -time Senior Research Engineer to develop and conduct applied research projects in its mechanical and electrical testing laboratory located in Forest Park, GA, just south of downtown Atlanta. NEETRAC is the preeminent center in the US for applied research and testing in the field of electric energy distribution and transmission. The center operates as a membership focused consortium that includes electric utilities, equipment manufacturers and related entities in the electric energy arena. The diverse interests of the consortium enable NEETRAC personnel to participate in a dynamic work environment that has extensive interaction with real world issues and opportunities. You will work at the limits of knowledge in the electric power transmission and distribution industry. Electric utility and product manufacturers call NEETRAC when they need to solve unique non-standard problems for which they do not have in-house capabilities. Engineers at NEETRAC become internationally recognized experts, providing unbiased, fact-based information that increases the safety and reliability of the electric grid. As a part of the School of Electrical and Computer Engineering at the Georgia Institute of Technology, NEETRAC provides solid benefits and competitive compensation packages. Duties: • Previous or past engineering license in any state, • 20+ experience with research and testing of electric utility components including but not limited to conductors, connectors, suspension hardware, tower and poles, etc., • Industrial experience working for an equipment manufacturer for more than 5 years., • Industry leadership experience as demonstrated through nations standards committee leadership experience. Preference will be given to IEEE/PES Overhead Lines, ANSI C119 and ASTM B01., • This is a part time position of 0-20 hours/week, with a typical week being 1-4 hours Senior Research Engineer • A Master's degree in related area, and seven (7) years of relevant full-time experience after completion of that degree, or, • A Master's degree in related area, and nine (9) years of relevant full-time experience after completion of a Bachelor's degree, or, • A Doctoral degree in related area, and four (4) years of relevant full-time experience after completion of a Bachelor's degree., • Degree Mechanical Engineering, • Previous or past engineering license in any state, • 20+ experience with research and testing of electric utility components including but not limited to conductors, connectors, suspension hardware, tower and poles, etc., • Industrial experience working for an equipment manufacturer for more than 5 years., • Industry leadership experience as demonstrated through nations standards committee leadership experience. Preference will be given to IEEE/PES Overhead Lines, ANSI C119 and ASTM B01. Dylan Summer- The University System of Georgia is comprised of our 25 institutions of higher education and learning as well as the System Office. Our USG Statement of Core Values are Integrity, Excellence, Accountability, and Respect. These values serve as the foundation for all that we do as an organization, and each USG community member is responsible for demonstrating and upholding these standards. More details on the USG Statement of Core Values and Code of Conduct are available in USG Board Policy 8.2.18.1.2 and can be found on-line at ___. Additionally, USG supports Freedom of Expression as stated in Board Policy 6.5 Freedom of Expression and Academic Freedom found on-line at ___. The Georgia Institute of Technology (Georgia Tech) is an Equal Employment Opportunity Employer. The Institute is committed to maintaining a fair and respectful environment for all. To that end, and in accordance with federal and state law, Board of Regents policy, and Institute policy, Georgia Tech provides equal opportunity to all faculty, staff, students, and all other members of the Georgia Tech community, including applicants for admission and/or employment, contractors, volunteers, and participants in institutional programs, activities, or services. Georgia Tech complies with all applicable laws and regulations governing equal opportunity in the workplace and in educational activities. Equal opportunity and decisions based on merit are fundamental values of the University System of Georgia ("USG") and Georgia Tech. Georgia Tech prohibits discrimination, including discriminatory harassment, on the basis of an individual's race, ethnicity, ancestry, color, religion, sex (including pregnancy), national origin, age, disability, genetics, or veteran status in its programs, activities, employment, and admissions. Further, Georgia Tech prohibits citizenship status, immigration status, and national origin discrimination in hiring, firing, and recruitment, except where such restrictions are required in order to comply with law, regulation, executive order, or Attorney General directive, or where they are required by Federal, State, or local government contract. This is not a supervisory position. This position does not have any financial responsibilities. This position will not be required to drive. This role is not considered a position of trust. This position does not require a purchasing card (P-Card). This position will not travel This position does not require security clearance. Successful candidate must be able to pass a background check. Please visit ___

___Job ID294952 LocationAtlanta, Georgia Full/Part TimeFull-Time Regular/TemporaryRegular ______ Overview Georgia Tech prides itself on its technological resources, collaborations, high-quality student body, and its commitment to building an outstanding and diverse community of learning, discovery, and creation. We strongly encourage applicants whose values align with our institutional values, as outlined in our ___. These values include academic excellence, diversity of thought and experience, inquiry and innovation, collaboration and community, and ethical behavior and stewardship. Georgia Tech has policies to promote a healthy work-life balance and is aware that attracting faculty may require meeting the needs of two careers. About Georgia Tech Georgia Tech is a top-ranked public research university situated in the heart of Atlanta, a diverse and vibrant city with numerous economic and cultural strengths. The Institute serves more than 45,000 students through top-ranked undergraduate, graduate, and executive programs in engineering, computing, science, business, design, and liberal arts. Georgia Tech's faculty attracted more than $1.4 billion in research awards this past year in fields ranging from biomedical technology to artificial intelligence, energy, sustainability, semiconductors, neuroscience, and national security. Georgia Tech ranks among the nation's top 20 universities for research and development spending and No. 1 among institutions without a medical school. Georgia Tech's Mission and Values Georgia Tech's mission is to develop leaders who advance technology and improve the human condition. The Institute has nine key values that are foundational to everything we do: 1. Students are our top priority., 2. We strive for excellence., 3. We thrive on diversity., 4. We celebrate collaboration., 5. We champion innovation., 6. We safeguard freedom of inquiry and expression., 7. We nurture the wellbeing of our community., 8. We act ethically., 9. We are responsible stewards. Over the next decade, Georgia Tech will become an example of inclusive innovation, a leading technological research university of unmatched scale, relentlessly committed to serving the public good; breaking new ground in addressing the biggest local, national, and global challenges and opportunities of our time; making technology broadly accessible; and developing exceptional, principled leaders from all backgrounds ready to produce novel ideas and create solutions with real human impact. The Campus Engineering team exists to provide support to all aspects of design, construction, operation, and maintenance of campus facilities. Campus facilities include not only the buildings which are occupied by our students, faculty and staff, but it also includes central campus utility plants and the associated utility systems, including chilled water, steam, power, and natural gas During the design process, first, our Team creates and maintains the design standards for building systems, including HVAC, plumbing, power distribution, and lighting. These standards are used by us, and by our outside consultants, to guide the design efforts of new buildings and renovation projects. Our team is also responsible for reviewing the design documents created by the consultants to ensure that their designs comply with standards. During construction projects, our Team is often called upon to provide advice related to unforeseen conditions which are discovered during demolition work. We often provide a second review of material and equipment submittals, as well as shop drawings. On most campus construction projects, the day-to-day interaction with the contractor is managed by our co-workers within one of the Construction teams. However, on a few projects we may be called on to manage those day-to-day contractor activities. Post construction, and throughout the life of the facilities, our team serves to provide advice to our Operation & Maintenance teams, and our Utilities Maintenance team, when a problem grows larger than their capacity. We also plan and prepare the way for projects to replace equipment as it nears the end of life. We are always looking ahead for opportunities to increase efficiency and resiliency in the systems. If you have experience in this type of work, please consider applying to join our Team. Provide basic electrical engineering services in support of either the operation and maintenance of the campus electrical distribution system or the design, construction and operation of electrical equipment, components or systems associated with research efforts within an academic or research unit. This position will interact on a consistent basis with: facilities management and utilities personnel or research management and faculty; co-workers, vendors, suppliers and contractors. This position typically will advise and counsel: management personnel. This position will supervise: NA. Job Duty 1 - Perform basic design and installation of electrical electrical/electronic components Job Duty 2 - Review and provide input to engineering plans and specifications for electrical systems Job Duty 3 - Perform basic troubleshooting associated with electrical systems; may involve calibration and repair work. Job Duty 4 - Prepare drawings, schematic diagrams and related documentation associated with electrical components and systems Job Duty 5 - Monitor expenses incurred; prepare related reports Job Duty 6 - Interact with vendors regarding procurement and delivery issues Job Duty 7 - Perform other duties as assigned Educational Requirements Bachelor's Degree in Electrical Engineering or equivalent combination of education and experience Other Required Qualifications Computer knowledge: ability to search for data, input/edit information, word processing, design custom reports; software knowledge includes Windows, Excel, MS Word and PowerPoint. Position has responsibility for formally representing the voice of the constituent/customer to Georgia Tech and is vital to effective marketing and communications by the Institute. Required Experience 0-2 years of job related experience Additional Preferred Qualifications Engineer in Training (EIT) or Professional Engineer (PE) Preferred Educational Qualifications Additional Bachelor's Degree in other Engineering discipline or Master's Degree in applicable field, or State Trade License in any applicable field SKILLS This job requires entry professional level knowledge and skills in the application of electrical engineering principles, processes and practices. Skills in application of regulations, codes and safety practices associated with electrical systems is required as is the use of office and engineering/technical related computer applications, databases and systems. The University System of Georgia is comprised of our 25 institutions of higher education and learning as well as the System Office. Our USG Statement of Core Values are Integrity, Excellence, Accountability, and Respect. These values serve as the foundation for all that we do as an organization, and each USG community member is responsible for demonstrating and upholding these standards. More details on the USG Statement of Core Values and Code of Conduct are available in USG Board Policy 8.2.18.1.2 and can be found on-line at ___. Additionally, USG supports Freedom of Expression as stated in Board Policy 6.5 Freedom of Expression and Academic Freedom found on-line at ___. The Georgia Institute of Technology (Georgia Tech) is an Equal Employment Opportunity Employer. The Institute is committed to maintaining a fair and respectful environment for all. To that end, and in accordance with federal and state law, Board of Regents policy, and Institute policy, Georgia Tech provides equal opportunity to all faculty, staff, students, and all other members of the Georgia Tech community, including applicants for admission and/or employment, contractors, volunteers, and participants in institutional programs, activities, or services. Georgia Tech complies with all applicable laws and regulations governing equal opportunity in the workplace and in educational activities. Equal opportunity and decisions based on merit are fundamental values of the University System of Georgia ("USG") and Georgia Tech. Georgia Tech prohibits discrimination, including discriminatory harassment, on the basis of an individual's race, ethnicity, ancestry, color, religion, sex (including pregnancy), national origin, age, disability, genetics, or veteran status in its programs, activities, employment, and admissions. Further, Georgia Tech prohibits citizenship status, immigration status, and national origin discrimination in hiring, firing, and recruitment, except where such restrictions are required in order to comply with law, regulation, executive order, or Attorney General directive, or where they are required by Federal, State, or local government contract. This is not a supervisory position. This position does not have any financial responsibilities. This position will not be required to drive. This role is not considered a position of trust. This position does not require a purchasing card (P-Card). This position will not travel This position does not require security clearance. Job Code: S5 Pay Range Starting At: $49,894.00 - $67,855.00 Location: Atlanta, GA Successful candidate must be able to pass a background check. Please visit ___

About Us Clayco is a full-service, turnkey real estate development, master planning, architecture, engineering, and construction firm that safely delivers clients across North America the highest quality solutions on time, on budget, and above and beyond expectations. With $7.6 billion in revenue for 2024, Clayco specializes in the "art and science of building," providing fast-track, efficient solutions for industrial, commercial, institutional, and residential-related building projects. The Role We Want You For This position serves as the overall Project Leader for the jobs in which they are involved. Responsibilities range from project set up, project buy out, contract execution and compliance, material procurement, progress tracking, material invoice approval, responsible for project sequencing and scheduling, maintaining and updating schedules, coordination and communication with General Contractor, change order distribution/tracking, coordination with Estimators, cost report job forecasting, overall project fiscal responsibility. The Specifics of the Role • Serve as primary contact to customers on projects., • Establish and maintain schedules with regard to both drawings and delivery. Work with suppliers to ensure that internal schedule is consistent with job schedule and manage schedule changes internally., • Work closely with accounting to establish and manage a schedule of values for progress billing., • Coordinate with subcontractors., • Maintain project budget throughout each project, with profit and loss accountability., • Identify opportunities for change orders and establish cost where applicable., • Prepare, issue and track change order status for material above and beyond the original contract., • Review purchase orders and specifications on new jobs to ensure the scope of work is consistent with the estimate., • Minimize job site and schedule problems wherever possible and minimize cost impact of potential back charges., • Ensure department achieves goals through management and leadership mentality., • Coordination with GC/Owner., • Mentoring Project Coordinator’s. Requirements • 5+ years of experience., • Bachelors degree in Construction management or Engineer recommended., • Knowledge of construction principles/practices required., • Problem-solving skills, with an adaptable and flexible style in working with all types of individuals., • Project set up, budget planning, buy out, and cost reporting experience is a must., • Good understanding of critical path scheduling., • Energetic and highly motivated with a strong sense of urgency., • Entrepreneurial and self-motivated, with the ability to work equally well on own as well as in a team environment., • Knowledge and understanding of building construction combined with steel design concepts presented on architectural and engineering drawings., • Ability to understand construction drawings and specifications., • Ability to work with Microsoft Office Suite, On-Screen Estimating software and ACC Build., • Communicates well both verbally and in writing, creates accurate reports, delivers presentations, shares information and ideas with others, has good listening skills., • Ability to identify, assimilate and comprehend the critical elements of a situation to extract and interpret implications of courses of actions to attend to details of a problem., • Effectiveness in planning and controlling work, motivating and developing subordinates, improving work methods and results, encouraging and supporting suggestions for work improvements, etc., • Breaks down problems into smaller components, understands underlying issues, can simplify and process complex issues, understands the difference between critical details and unimportant facts., • Plans for and uses resources efficiently, always looks for ways to reduce costs., • Is attentive to detail and accuracy, is committed to excellence, looks for improvements continuously, monitors quality levels, finds root cause of quality problems, owns/acts on quality problems., • Knows and projects costs to complete accurately. Proactively adjusts budgets and develops solutions to maximize profits., • Leads through change and adversity, makes the tough call when needed, builds consensus when appropriate, motivates and encourages others., • Operates within the organization's formal and informal structures, builds allies and relationships across departments, uses allies to build consensus and create results, is appropriately diplomatic, understands others' roles and perspectives, can sell projects and ideas across the organization., • Anticipates and resolves conflicts, turns team diversity into an advantage, uses unique team talents, defines processes and goals, works for consensus., • Establishes project goals, milestones, and procedures, defines roles and responsibilities, acquires project resources, coordinates projects throughout company, monitors project progress, and manages multiple projects., • Inspires and stimulates the best efforts of subordinates in the accomplishment of identified goals. Some Things You Should Know • Our clients and projects are nationwide – Travel will be required., • No other builder can offer the collaborative design-build approach that Clayco does., • We work on creative, complex, award-winning, high-profile jobs., • The pace is fast!, • This position is classified as a safety-sensitive role in accordance with applicable state and federal laws. Candidates selected for this position will be subject to a comprehensive background check, which includes mandatory drug testing. Why Clayco? • 2025 Best Places to Work – St. Louis Business Journal, Los Angeles Business Journal, and Phoenix Business Journal., • 2025 ENR Midwest – Midwest Contractor (#1)., • 2025 ENR Top 100 Design-Build Firms – Design-Build Contractor (Top 5)., • 2025 ENR Top 100 Green Contractors – Green Contractor (Top 3)., • 2025 ENR Top 25 Data Center Builders - Data Center Contractor (Top 3). Benefits • Discretionary Annual Bonus: Subject to company and individual performance., • Comprehensive Benefits Package Including: Medical, dental and vision plans, 401k, generous PTO and paid company holidays, employee assistance program, flexible spending accounts, life insurance, disability coverage, learning & development programs and more! Compensation • The salary range for this position considers a wide range of factors in making compensation decisions including but not limited to: Education, qualifications, skills, training, experience, certifications, internal equity, and location. Compensation decisions are dependent on the facts and circumstances of each case.

Assistant Superintendent Location: Atlanta, GA Direct Hire Reports to: Superintendent Position Summary The Assistant Superintendent helps lead all on-site construction activity from site mobilization through owner turnover. This role manages field operations — ensuring safety, schedule, cost, and quality performance targets are met. It requires daily coordination with project management, development, subcontractors, and consultants. Because of its field leadership and safety responsibilities, this position is designated safety-sensitive. Qualifications • Minimum 5 years of field supervision experience on multifamily or commercial projects., • Proven ability to lead subcontractors and enforce safety and quality standards., • Proficiency with Procore, Bluebeam, and Microsoft Office Suite., • Strong communication and documentation skills., • OSHA 30 certification preferred., • Ability to interpret architectural, structural, and MEP drawings. Responsibilities Safety & Site Setup • Implement a site-specific Safety Plan before mobilization., • Set up the field office (double-wide trailer, TV, printed site plan, signage, permits, toilets, fencing, roll-offs)., • Collect Safety Data Sheets (SDS) and site-specific safety plans from all subcontractors., • Call in Safety Consultant visits (minimum 1/month, target 2/month); document and close out findings., • Maintain OSHA postings, first-aid kits, and emergency route maps in the site office., • Report injuries immediately and manage OSHA visits per procedure. Schedule & Coordination • Develop and maintain the master schedule with the Project Manager., • Update and distribute 2- and 4-week look-aheads; follow up with subcontractors on progress., • Lead weekly subcontractor coordination meetings and issue meeting minutes., • Track daily manpower, photos, and progress through Procore., • Coordinate long-lead material delivery to maintain schedule. Consultant & Inspection Management • Schedule and track all required consultant visits (Waterproofing, ADA, Structural Engineer, 3rd-party testing, Builder’s Risk)., • Review consultant reports, document completion with photos, and obtain final sign-off letters before closeout., • Ensure compliance with Builder’s Risk inspection requirements (fire safety, fencing, signage, hot-work permits). Quality & Cost Control • Review drawings for conflicts before buyout; issue RFIs as needed., • Conduct preconstruction meetings for each trade., • Perform daily site walks to confirm quality and adherence to plans., • Verify field work aligns with budget targets and notify PM/VP of any cost impacts., • Approve subcontractor draw requests through Procore. Compliance & Documentation • Maintain accurate logs for manpower, equipment, photos, RFIs, and submittals., • Ensure OSHA 300 logs, labor law posters, and safety plans are posted and current., • Verify all closeout documentation and consultant sign-offs are complete before turnover. Jobsite Housekeeping • Enforce daily cleanup and site organization., • Issue verbal or written warnings/fines for noncompliance. ABOUT EIGHT ELEVEN At Eight Eleven, our business is people. Relationships are at the center of what we do. A successful partnership is only as strong as the relationship built. We’re your trusted partner for IT hiring, recruiting, and staffing needs. For over 16 years, Eight Eleven has established and maintained relationships that are designed to meet your IT staffing needs. Whether it’s contract, contract-to-hire, or permanent placement work, we customize our search based upon your company's unique initiatives, culture, and technologies. With our national team of recruiters placed at 21 major hubs around the nation, Eight Eleven finds the people best-suited for your business. When you work with us, we work with you. That’s the Eight Eleven promise. Eight Eleven Group provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, national origin, age, sex, citizenship, disability, genetic information, gender, sexual orientation, gender identity, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state, and local laws.

About Us Clayco is a full-service, turnkey real estate development, master planning, architecture, engineering, and construction firm that safely delivers clients across North America the highest quality solutions on time, on budget, and above and beyond expectations. With $7.6 billion in revenue for 2024, Clayco specializes in the "art and science of building," providing fast track, efficient solutions for industrial, commercial, institutional, and residential related building projects. About Clayco Systems and Equipment Innovations (SEI) As part of our integrated service offerings, Clayco’s Systems and Equipment Innovations (SEI) offers a turnkey solution to execute complex building systems and process systems. Clayco SEI provides preconstruction, design, purchasing, and installation of mechanical, electrical, and process scopes of work. The Role We Want You For As a Project Engineer with SEI, you will be based on a construction project site. In this role you will use your education and knowledge to support the Project Manager by providing technical support, documenting, and reporting project activities and meetings. The work to be performed may consist of various scopes including structural, mechanical, electrical, and other trades related to building and process systems on highly complex projects nationwide., construction, start up, and testing on highly complex projects nationwide. These responsibilities will cover the full life cycle of the project including planning, construction, start up, testing, commissioning, and turnover. All these functions will have a specific focus relative to self-perform execution of respective scopes of work. The Specifics of the Role • Build client and subcontractor relationships., • Team with Architects, Engineers, and Planners to create and manage a design schedule., • Assist in the planning process., • Assist in the establishment of project forecasts and budgets., • Assists in the reporting of project status and cost., • Accept responsibility for project execution., • Mentor and develop Interns and new incoming project management staff., • Review PO’s & Negotiate Terms., • Receive, examine, and evaluate contractor quotes for changes., • Negotiate project and change costs., • Expedite Materials/Equipment., • Setup Equipment Status Tracking., • Setup Material Tracking., • Expedite deliveries to meet schedule., • Assist in managing Design Trades., • Oversee Accountability for schedule/coordination/document control., • Contract management for installation subcontractors., • Cost control for equipment, materials, and installation., • Schedule management/input for process scopes., • Input progress/productivity updates in tracking systems and provide data output to the team for use in management of project execution., • Participate in cost review meetings and regularly update cost tracking systems., • Assist superintendents with punch list tracking, capturing safety observations, and taking progress photos while walking the job., • Assist with site logistics preparation and maintenance., • May be involved with the preparation, monitoring, and distribution of RFIs and submittals., • Responsible for documenting meeting minutes., • Manage drawings, project closeouts, and turnovers., • Observe field activities to assist with the schedule., • Facilitate productivity reporting for self-performed trades and owner billings. Requirements • Bachelor’s Degree in Construction Management, Engineering, Architecture, or related degree preferred., • 0 to 5 years of experience managing construction projects, ideally design-build., • Demonstrated knowledge of construction principles, practices, and technology., • Previous experience on a successful project management team., • Ability to walk a job site, climb ladders, and scale multi-floor scaffolding., • Ability to lift objects of at least 50 lbs., • General knowledge of the construction industry. Some Things You Should Know • Our clients and projects are nationwide – Travel will be required., • No other builder can offer the collaborative design-build approach that Clayco and SEI does., • We work on creative, complex, award-winning, high-profile jobs., • The pace is fast!, • This position is classified as a safety-sensitive role in accordance with applicable state and federal laws. Candidates selected for this position will be subject to a comprehensive background check, which includes mandatory drug testing. Why Clayco and SEI? • 2025 Best Places to Work – St. Louis Business Journal, Los Angeles Business Journal, and Phoenix Business Journal., • 2025 ENR Midwest – Midwest Contractor (#1)., • 2025 ENR Top 100 Design-Build Firms – Design-Build Contractor (Top 5)., • 2025 ENR Top 100 Green Contractors – Green Contractor (Top 3)., • 2025 ENR Top 25 Data Center Builders - Data Center Contractor (Top 3). Benefits • Discretionary Annual Bonus: Subject to company and individual performance., • Comprehensive Benefits Package Including: Medical, dental and vision plans, 401k, generous PTO and paid company holidays, employee assistance program, flexible spending accounts, life insurance, disability coverage, learning & development programs and more! Compensation • The salary range for this position considers a wide range of factors in making compensation decisions including but not limited to: Education, qualifications, skills, training, experience, certifications, internal equity, and location. Compensation decisions are dependent on the facts and circumstances of each case.

Job Title: Building Engineer Company: Sodo Atlanta, LLC Location: Atlanta, GA Job Type: Full-Time; Onsite Job Summary We are seeking a skilled Building Engineer to manage technical operations and maintenance for our property portfolio. You will ensure optimal performance of mechanical, electrical, and plumbing systems, balancing historic preservation with modern functionality. A strong technical background, preventative mindset, and commitment to safety/compliance are essential for maintaining a safe, comfortable, and efficient tenant environment. Key Responsibilities Operational & Administrative Tasks • Maintain accurate, up-to-date maintenance logs, equipment records, and work order status reports. Updating building drawings as necessary., • Manage utility accounts for the entire portfolio. Tracking consumption metrics to identify opportunities for efficiency improvements., • Assist in space planning, tenant build-outs, and renovation activities as needed., • Develop processes and systems to track work orders, building documentation, and other building related information. Systems Maintenance & Repair • Perform routine maintenance, troubleshooting, and repairs on building systems, including electrical, plumbing, HVAC, and mechanical infrastructure., • Diagnose and resolve technical issues to ensure minimal downtime and optimal system performance., • Manage the operation of HVAC systems to maintain consistent tenant comfort and energy efficiency., • Inspections & Preventative Maintenance, • Conduct regular inspections of building systems and infrastructure to detect and address potential issues before they escalate., • Implement and manage a comprehensive preventative maintenance program for all critical equipment., • Regularly inspect life safety systems, water heaters, lighting, and other essential building components. Compliance & Safety • Ensure all properties remain safe and in full compliance with building codes., • Monitor and enforce compliance with fire and life safety legislation including evacuation procedures., • Maintain a safe working environment for the team, tenants, and visitors., • Project & Vendor Management, • Coordinate and oversee maintenance and capital repair projects, ensuring they remain on schedule and within budget., • Manage relationships with external contractors and service providers for specialized large-scale projects., • Supervise vendor work to ensure strict adherence to property standards and safety protocols., • Systematically collect, organize, and manage all construction turnover documentation, including as-built drawings, equipment submittals, warranties, and operation & maintenance (O&M) manuals, to ensure the property management team is fully equipped for long-term building care and maintenance. Qualifications • High school diploma or equivalent required; Associate’s degree or vocational training in building engineering or a related field preferred., • Relevant professional certifications (e.g., HVAC, EPA Universal, Electrical, SMA/SMT) are highly desirable., • 3-5+ years of experience in building engineering or commercial facility maintenance., • In-depth knowledge of building systems, including HVAC, electrical, plumbing, and life safety., • Proficiency with Building Management Systems (BMS) and maintenance management software., • Ability to read and interpret blueprints, schematics, and technical manuals., • Strong problem-solving skills and the ability to work independently., • Must have a valid driver’s license and reliable transportation. Work Environment This position involves a mix of hands-on technical work and administrative duties. It requires the physical ability to lift heavy equipment (up to 50 lbs), climb ladders, access mechanical spaces/roofs, and work in various environmental conditions. You will travel between properties within the South Downtown portfolio, interacting daily with the property management team, tenants, and vendors. Benefits: • $75,000-$95,000 annual salary, commensurate with experience., • Comprehensive benefits package, including health, dental, and vision insurance., • Retirement savings plan with employer matching., • Results-only work environment with no tracking of vacation or sick days. About South Downtown Atlanta Revitalizing the largest collection of historical real estate assets in ATL — 56 buildings across 16 acres in Atlanta's South Downtown neighborhood. On a 40-year mission to build a thriving community of creative entrepreneurs and doers from every corner of Atlanta. Every great city has a vibrant downtown—it’s Atlanta’s turn. To Apply: Visit South Downtown Atlanta’s LinkedIn Page, and email your cover letter and resume to .

Description Leidos is seeking a Civil Design Engineer to join the National Airspace System Integration Support Contract (NISC IV) team. In this role you will support the Federal Aviation Administration's (FAA) Eastern Service Area (ESA) performing design engineering, cost estimating, scheduling, coordinating, inspecting, and acceptance and report project progress and issues against project goals, scope of work, and schedule. The projects support air traffic control facilities over the geographic scope of the ESA. You will ensure accuracy of design, products and timeliness of project completion. Hybrid position Located in College Park, GA Up to 25% travel Civil Engineer Primary Responsibilities: • Plan and design a variety of facility establishment, replacement and modernization projects (e.g. buildings, roofing, antenna towers, site work, structural systems, seismic reinforcement, foundations and environmental assessments), • Lead on-site surveys to develop designs and detailed reports, • Conduct meetings with managers, architects and multi-disciplinary engineers, • Conduct and analyze studies of existing facilities, • Respond to RFIs (Requests for Information), • Utilize relevant software tools to assist in analysis and design, • Generate sketches showing relation of proposed work in existing or new facilities with specifications and dimensions, • Plan, schedule, and coordinate construction project activities to meet milestones and deadlines working directly with stakeholders and contractors, • Confer with multi-disciplinary engineering staff and other personnel to identify and resolve problems with the design or implementation, • Prepareconstruction drawings and prepare site-specific specifications and contract documents and independent cost estimates, • Review contractor design and construction submittals, • Perform project management related tasks and communication (including safety plans, sequence of work, cutover plans, risk management plans, lead and asbestos work permits), • Lead on-site coordination meetings, inspections, cutovers, testing and restoration of facilities, • Provide periodic updates of project to team, management, and stakeholders, • Provide timely responses for requests for information and project related submittals, • Provide monthly and semi-annual work status reports, • Track and reconcile closure of project punch list exceptions, • Manage multiple projects towards successful on-time completion, • Perform internal design reviews of other projects Civil Engineer Basic Qualifications: • Engineering degree from a college or university accredited by the Accreditation Board for Engineering and Technology (ABET)., • Eight or more years of experience in design and construction of commercial or institutional facilities. Or a Masters degree and six+ years of relevant experience., • Proficient knowledge of building codes., • Proficient in Microsoft Office suite., • Proficiency in engineering analysis and design software tools, • Ability to create and edit project drawings in AutoCAD., • Ability to obtain and maintain public trust suitability. Civil Engineer Preferred Qualifications: • Registered Professional Engineer in good standing in the United States. If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo - because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 - and moving faster than anyone else dares. March 9, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $92,300.00 - $166,850.00 The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos' name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system - never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Concord Hospitality - - Responsibilities: Perform routine maintenance and repairs to keep equipment and facilities in top condition; Assist the Chief Engineer with building and grounds projects; Conduct preventative maintenance checks and maintain safety standards; Respond promptly to guest request

___Job ID294543 LocationForest Park, Georgia Full/Part TimeFull-Time Regular/TemporaryTemporary ______ Georgia Tech prides itself on its technological resources, collaborations, high-quality student body, and its commitment to building an outstanding and diverse community of learning, discovery, and creation. We strongly encourage applicants whose values align with our institutional values, as outlined in our Strategic Plan. These values include academic excellence, diversity of thought and experience, inquiry and innovation, collaboration and community, and ethical behavior and stewardship. Georgia Tech has policies to promote a healthy work-life balance and is aware that attracting faculty may require meeting the needs of two careers. About Georgia Tech Georgia Tech is a top-ranked public research university situated in the heart of Atlanta, a diverse and vibrant city with numerous economic and cultural strengths. The Institute serves more than 45,000 students through top-ranked undergraduate, graduate, and executive programs in engineering, computing, science, business, design, and liberal arts. Georgia Tech's faculty attracted more than $1.4 billion in research awards this past year in fields ranging from biomedical technology to artificial intelligence, energy, sustainability, semiconductors, neuroscience, and national security. Georgia Tech ranks among the nation's top 20 universities for research and development spending and No. 1 among institutions without a medical school. Georgia Tech's Mission and Values Georgia Tech's mission is to develop leaders who advance technology and improve the human condition. The Institute has nine key values that are foundational to everything we do: 1. Students are our top priority., 2. We strive for excellence., 3. We thrive on diversity., 4. We celebrate collaboration., 5. We champion innovation., 6. We safeguard freedom of inquiry and expression., 7. We nurture the wellbeing of our community., 8. We act ethically., 9. We are responsible stewards. Over the next decade, Georgia Tech will become an example of inclusive innovation, a leading technological research university of unmatched scale, relentlessly committed to serving the public good; breaking new ground in addressing the biggest local, national, and global challenges and opportunities of our time; making technology broadly accessible; and developing exceptional, principled leaders from all backgrounds ready to produce novel ideas and create solutions with real human impact. Provide engineering services in support of systems and equipment associated with research efforts within an academic or research unit or laboratory. Specific duties will be determined based on assignment and unit needs. This position will interact on a consistent basis with: unit management and staffThis position typically will advise and counsel: unit management and staffThis position will supervise: NA • Assist engineers and technicians with mechanical/electrical testing, • Assist engineers and technicians with data analysis and reporting, • Operate testing and machine equipment Job Duty 2 - Develop engineering project schedules, plans, and specifications for systems and components. Job Duty 3 - Conduct analyses of system performance; prescribe corrective action where required. Job Duty 4 - Troubleshoot systems; may involve calibration and repair work. Job Duty 5 - Prepare drawings, schematic diagrams and other documentation associated with components and systems. Job Duty 6 - Provide input to and administer project engineering budgets. Job Duty 7 - Interact with vendors regarding procurement and delivery issues. Job Duty 8 - Participate in project reviews for conformance to quality standards and compliance with applicable codes and regulations. Job Duty 9 - Perform other duties as assigned Educational Requirements Bachelor's Degree in Engineering field, or equivalent combination of education and experience Other Required Qualifications Valid Driver's license This is a temporary position, limited to 1300 hours or 12 consecutive months, and subject to ACA and GT guidelines for temporary employment. Required Experience Up to two years of job related experience Additional Preferred Qualifications Professional Engineer (PE) Demonstrated hands-on experience through internships or similar experiences SKILLS This job requires application of engineering principles, processes and practices; application of regulations, codes and safety practices; utilization of basic and advanced computer applications including those specific to areas of responsibility; communication skills. The University System of Georgia is comprised of our 26 institutions of higher education and learning as well as the System Office. Our USG Statement of Core Values are Integrity, Excellence, Accountability, and Respect. These values serve as the foundation for all that we do as an organization, and each USG community member is responsible for demonstrating and upholding these standards. More details on the USG Statement of Core Values and Code of Conduct are available in USG Board Policy 8.2.18.1.2 and can be found on-line at ___. Additionally, USG supports Freedom of Expression as stated in Board Policy 6.5 Freedom of Expression and Academic Freedom found on-line at ___. The Georgia Institute of Technology (Georgia Tech) is an Equal Employment Opportunity Employer. The Institute is committed to maintaining a fair and respectful environment for all. To that end, and in accordance with federal and state law, Board of Regents policy, and Institute policy, Georgia Tech provides equal opportunity to all faculty, staff, students, and all other members of the Georgia Tech community, including applicants for admission and/or employment, contractors, volunteers, and participants in institutional programs, activities, or services. Georgia Tech complies with all applicable laws and regulations governing equal opportunity in the workplace and in educational activities. Equal opportunity and decisions based on merit are fundamental values of the University System of Georgia (USG) and Georgia Tech. Georgia Tech prohibits discrimination, including discriminatory harassment, on the basis of an individuals race, ethnicity, ancestry, color, religion, sex (including pregnancy), national origin, age, disability, genetics, or veteran status in its programs, activities, employment, and admissions. Further, Georgia Tech prohibits citizenship status, immigration status, and national origin discrimination in hiring, firing, and recruitment, except where such restrictions are required in order to comply with law, regulation, executive order, or Attorney General directive, or where they are required by Federal, State, or local government contract. This is not a supervisory position. This position does not have any financial responsibilities. This position will be required to drive. This role is not considered a position of trust. This position does not require a purchasing card (P-Card). This position will not travel This position does not require security clearance.

Classification: Non-Exempt We are Alsco Uniforms. We've been working hard for our customers since 1889 when we invented the uniform and linen rental industry. Alsco Uniforms has grown into a worldwide leader serving over 350,000 customers in 13 countries. It's our job every day to make every aspect of the customer experience better. Whatever our customers need, Alsco Uniforms finds the answers that work for them. Our employees are the heart and soul of Alsco Uniforms. As a result, we have a long history of strong financial performance, continuous improvement, and customer service. We're seeking driven professionals with ambition to grow within our company. We'd love to talk to you about how you can fit into our team of diverse individuals and how your hard work will be rewarded with competitive pay and benefits and ongoing career development. Join our team and build your career with Alsco Uniforms! Job Summary: The Maintenance Technician is responsible for installing, repairing and maintaining large industrial textile processing equipment, as well as facility maintenance. Tasks include start-up and shut-down procedures, electrical troubleshooting, maintaining and operating boilers, welding and cutting, hydraulics, pneumatics, mechanical, and other systems. This position reports to the Chief Engineer. Our full-time employees enjoy: 401K Plan with Company Match Medical, Dental, Vision, FSA/HSA Life Insurance, Disability Insurance Vacation, Sick Time, Holidays Choice of Global Cash Card or Direct Deposit Career Advancement Learning & Development Opportunities Inclusive and Diverse Team Environment Benefits may vary for positions covered by a collective bargaining agreement. Essential Functions: • Installs, repairs and performs preventative maintenance on industrial processing equipment, water levels, water systems and other equipment and systems., • Troubleshoots electrical issues., • Responds to daily maintenance requests in a timely fashion to minimize equipment downtime., • Provides emergency/unscheduled repairs of production equipment., • Diagnoses problems, replaces or repairs parts, tests and makes adjustments., • Looks for opportunities to continually improve maintenance processes., • Works with all plant personnel in a cooperative and professional manner., • Strictly adheres to all safety rules, policies and procedures required by Alsco, law, and what is recognized as common practice in the industry., • Ensures work is performed safely and efficiently., • Maintains technical knowledge by attending educational workshops and reviewing technical publications. Remains current on equipment and repair procedures and best practices., • Studies blueprints and manufacturers' manuals to determine correct operation of machinery., • Proficient in reading electrical schematics., • Maintains accurate and timely records of maintenance performed., • Follows written and verbal instructions and performs other tasks as directed by supervision., • Complies with all Federal, State and local laws. Additional Functions: • May work with and support other branch personnel as required by supervision., • Drive and pick up parts, transport equipment, parts, etc. Qualifications: • Have and maintain a valid driver's license and driving record free of chargeable accidents, speeding or other safety violations., • Minimum of two years maintenance engineering experience with specific knowledge of machinery, electricity, electronics, plumbing, hydraulics, pneumatics, welder and boiler applications., • Proficient in the proper use of power and hand tools., • Strong electrical troubleshooting ability of 3 phase 230 volt systems., • PLC programming experience., • Experience in carpentry, boiler repair, welding, and general facility repairs., • Good verbal and written communication skills in English, ability to comprehend and follow direction, perform basic math, good time management, • High school graduate or equivalency preferred., • Standing, sitting, walking, bending, stooping, reaching, twisting, kneeling, working in confined areas, reaching overhead, driving a forklift, grasping, moving equipment, pushing, pulling, moving loaded carts weighing up to 500 lbs, lifting and carrying up to 100 lbs, reading, writing, speaking, hearing. Typical Environmental Conditions: • Inside and outside areas of a typical industrial laundry facility, which includes working with and around large machinery, variations in temperature, noise, odors, humidity, lint and dust, in general offices or on outside grounds. Travel Requirements: • Occasionally, such as to procure parts. The Maintenance Technician must perform the essential duties and responsibilities with or without reasonable accommodation efficiently and accurately, and without causing significant safety threat to self or others. The statements made herein are intended to describe the general nature and level of work being performed by employees assigned to this job classification. They are not intended to be construed as an exhaustive and inclusive list of all responsibilities, duties, and/or skills required of personnel so classified. For a general description of benefits that are being offered for this position, please visit alsco.com/benefits. Alsco Uniforms is an Equal Employment Opportunity Employer. Candidates are considered for employment with Alsco Uniforms without regard to their race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status (specifically status as a disabled veteran, recently separated veteran, armed forces service medal veteran, or active duty wartime or campaign badge veteran), or other classification protected by applicable federal, state, or local law. Revised: 04/29/2022 Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

At EBI we're committed to providing deep technical, industry and commercial real estate expertise to help our clients navigate complexity and realize maximum value for their assets. For 35 years we've been helping investors, lenders, owners, developers, contractors, and property managers mitigate risk and optimize their built facilities for maximum economic, safety, and environmental value. We're unique in our ability to deliver high quality, responsive services across the entire asset lifecycle, from rapid assessments, to advisory, to implementation and verification services, nationwide. Unlike other environmental consulting firms, we provide the full suite of commercial real estate and asset management services through to improvement and verification. Our experts leverage our proprietary assessment methodologies, benchmarking, regulation, and analytics tools across six core domains. EBI is your environmental, sustainability, engineering and health and safety partner, nationwide. Assess. Advise. Improve. Verify. Position Summary EBI Consulting is seeking a full-time Project Engineer to conduct due diligence services as part of our nationally recognized practice. The successful candidate will perform field assessments of various commercial property types, including but not limited to multifamily residential, retail, office, self-storage, manufacturing, industrial, hospitality, healthcare, and warehouse/distribution facilities, as well as conduct interviews and independent research of local, state, and federal resources. Reporting includes Property Condition Assessments (PCAs) to ASTM E2018 standards, Property Needs Assessments (PNAs), Property Assessment Screening services, Phase I Environmental Site Assessments (ESAs) to ASTM E1527 standards and other associated reports to various Client-specific scopes of work. Assessment reporting will address the current condition of significant building and site components (i.e. roof, facade, HVAC, etc.), evaluate effective useful life of key components, and address the need and timing of replacement and/or repair. This position reports directly to the Associate Area Operations Manager and will be a fully remote, work from home position. The majority of clients this position will support will be located in or around Atlanta, GA, so candidates will need to already be established in this market. This is a field-based position, with upwards of 50% local and regional travel expected. Candidates must have previous experience with travel and be comfortable with this model to be considered. Essential Duties and Responsibilities • Conduct site reconnaissance, interviews, and independent research, • Prepare deliverables with quality supporting documentation (site figures, appendices), • Bachelor's degree from accredited college or university in Architecture, Engineering, Construction Management, Environmental Science, or related field, • 3-5+ years of professional experience in engineering and due diligence consulting, construction, facilities management, or other real estate consulting services At EBI, we cultivate a welcoming and collaborative culture. We are proud to be an Equal Employment Opportunity employer and encourage diverse candidates to apply. We do not discriminate against qualified individuals based on their status as a protected veteran or individuals with disabilities, nor do we discriminate based on sex, race, color, religion, national origin, age, marital status, gender identity, gender expression, or sexual orientation. All vendors are expected to maintain a working environment free from discrimination or harassment. The reasonable estimate of the salary range for this position is $70,000 - $95,000. The salary range describes the minimum to maximum base salary range for this position across applicable US locations. This position may also be eligible for a bonus whereby total compensation may exceed base salary depending on individual performance. The actual compensation offered will be based on a range of factors that are considered in making compensation decisions including, but not limited to; geographic location, work experience, education, licensure requirements, knowledge, skills/level, qualifications and budget. For an overview of our benefits, please refer to our website. #LI-Atlanta Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

Description Looking for an opportunity to make an impact? At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers' success. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. Your greatest work is ahead! We are looking for a Substation Protection & Control Engineer to join our team. As an Career Protection & Control Engineer, candidates will have the opportunity to design substation protection and control projects for electric utilities at voltages from 12kV up to 500kV. This is an exciting and growing field in the power systems industry and allows candidates to get exposure to how the power generation such as that of renewable energy ties into the electric system. Candidates will be expected to use knowledge of digital logic design, AC and DC circuits to design substation electrical projects. *Candidates must be located in or able to relocate to the office location: • Atlanta, GA *Hybrid Work Schedule: (3 days in office) • 2-3 Days of In-Person Connection: Build strong relationships with colleagues and clients by being in the office or on-site. It's the perfect way to strengthen collaboration and ensure seamless communication., • Networking Events: Expand your horizons and make valuable connections at industry-leading events. You'll be in the right rooms, with the right people, at the right time., • Continuous Development: Stay at the forefront of innovation by participating in top-tier training programs and conferences. Personal growth isn't optional here; it's part of the package., • The Best of Both Worlds: With the flexibility to work remotely on other days, you'll have the freedom to focus, recharge, and bring your A-game to every opportunity. Successful candidates can look forward to a fast paced, diverse work environment and flexible work hours/work arrangements as well as managers who will encourage career development and growth including: • Engineer in Training Certificate (EIT)., • Professional Engineer License (PE)., • Project Management Professional (PMP)., • Technical & Non-Technical Training Opportunities., • Leadership Opportunities., • Mentorship & Training Opportunities., • Opportunity to Lead, Grow, and Inspire a Dynamic Team In this role, you can also expect to gain experience in the following: • Interfacing with Local Clients., • Partnering with a Variety of Utility Clients Nationwide., • Working with different types of projects ranging from distribution to transmission level voltages., • Electrical Power Calculations., • Interactions with Other Disciplines (Substation, Telecom, and Civil Structural, etc). Are you ready to make an impact? Begin your journey of a flourishing and meaningful career, share your resume with us today! The Challenge: • Relay One Line Design., • Three Line AC Schematic Design., • DC Protection Schematic Design., • Panel Layout and Wiring Design., • Develop Bill of Materials Based on Design Criteria., • Quality Control Checks on Wiring Design., • Complete Project Lifecycle Support from Scoping to Final Design and Implementation., • Construction Support., • Applying the Minimum Requirements of the National Electrical Safety Code to the Design Processes, • Working with Client Standards to Implement Design., • Working with a Designer/Drafter to Create the Required Drawings for Each Project. Successful candidates must comply with quality control and safe work practices and maintain compliance with project scope, schedule, and budget. This position will be a member of a design team comprised of engineers, designers, and CAD technicians and will work with client standards to implement design. What Sets You Apart: • Mid-Level: Bachelor's degree in electrical engineering, or related degree with two (2+) or more years of Substation protection control design and/or field testing/commissioning experience., • Senior Level: Bachelor's degree in electrical engineering, or related degree with four (4+) or more years of Substation protection control design and/or field testing/commissioning experience., • Experience in executing substation protection and control projects., • Demonstrate Excellent communication skills and ability to interact with the internal team and clients to meet project needs., • Ability to read and design substation protection and control drawings such as one-line drawings, three-line drawings, AC/DC schematic drawings and wiring design., • Ability to meet deadlines under pressure situations., • Collaborator and leader who can work effectively in team environment., • Self-starter who works independently with minimal direction., • Strong analytical skills and proven problem solver in both team and independent environments., • High level of computer competency., • Willingness to travel to project and/or client sites. You Might Also have: • US Citizen and able to pass a DOE Background, • Engineer Intern ("EI" or "EIT") professional certification., • Professional Engineer ("PE") License., • Experience performing quality control checks on small substation protection and control design projects., • Experience working on CAD tools., • Master's degree in related field., • Field testing/commissioning experience. WHAT WE DO Leidos is a trusted and technology-focused solutions provider. Utilities and mobile operators rely on our Power Delivery Services Team for reliable power and telecommunication expertise, as reflected through our work with more than 50 investor-owned utilities, more than 160municipals/cooperatives,as well as a growing number of mobile operators, local utility providers and private developers. In addition to providing engineering and project management services, Leidos works with an established group of industry-leading construction partners delivering meaningful Energy Delivery Solutions. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms. To explore and learn more, click ___! At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers' success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. We take care of our employees. Leidos seeks the best and the brightest, and in return, we invest in you, with an eye on your future, through career advancement, growth opportunities and continuous improvement via mentoring, formal and informal project management training and assistance with obtaining pertinent certifications. We challenge you to help solve some of the world's toughest problems, and ___ with a welcoming culture that recognizes the importance of a strong work/life balance, as well as ___. We believe that diversity and inclusion make us all better and offer the chance to have fun and make a difference. PowerDelivery PDSSUBSTATION If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo - because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 - and moving faster than anyone else dares. February 11, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $69,550.00 - $125,725.00 The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos' name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system - never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

___Job ID292884 LocationAtlanta, Georgia Full/Part TimeFull-Time Regular/TemporaryRegular ______ Overview Georgia Tech prides itself on its technological resources, collaborations, high-quality student body, and its commitment to building an outstanding and diverse community of learning, discovery, and creation. We strongly encourage applicants whose values align with our institutional values, as outlined in our Strategic Plan. These values include academic excellence, diversity of thought and experience, inquiry and innovation, collaboration and community, and ethical behavior and stewardship. Georgia Tech has policies to promote a healthy work-life balance and is aware that attracting faculty may require meeting the needs of two careers. About Georgia Tech Georgia Tech is a top-ranked public research university situated in the heart of Atlanta, a diverse and vibrant city with numerous economic and cultural strengths. The Institute serves more than 45,000 students through top-ranked undergraduate, graduate, and executive programs in engineering, computing, science, business, design, and liberal arts. Georgia Tech's faculty attracted more than $1.4 billion in research awards this past year in fields ranging from biomedical technology to artificial intelligence, energy, sustainability, semiconductors, neuroscience, and national security. Georgia Tech ranks among the nation's top 20 universities for research and development spending and No. 1 among institutions without a medical school. Georgia Tech's Mission and Values Georgia Tech's mission is to develop leaders who advance technology and improve the human condition. The Institute has nine key values that are foundational to everything we do: 1. Students are our top priority., 2. We strive for excellence., 3. We thrive on diversity., 4. We celebrate collaboration., 5. We champion innovation., 6. We safeguard freedom of inquiry and expression., 7. We nurture the well-being of our community., 8. We act ethically., 9. We are responsible stewards. Over the next decade, Georgia Tech will become an example of inclusive innovation, a leading technological research university of unmatched scale, relentlessly committed to serving the public good; breaking new ground in addressing the biggest local, national, and global challenges and opportunities of our time; making technology broadly accessible; and developing exceptional, principled leaders from all backgrounds ready to produce novel ideas and create solutions with real human impact. Atlanta, GA About the School of Electrical and Computer Engineering (ECE) at the Georgia Institute of Technology The School of Electrical and Computer Engineering (ECE) at the Georgia Institute of Technology is one of the largest producers of electrical engineers and computer engineers in the United States. Almost 2,600 students are enrolled in the School's graduate and undergraduate programs, and in the last academic year, 801 degrees were awarded. All ECE undergraduate and graduate programs are in the top five of the most recent college rankings by U.S. News & World Report. In addition to the main campus in Atlanta, Georgia, ECE also has permanent operations at Georgia Tech-Lorraine in France. Graduate students who spend at least one semester each at of the Georgia Tech locations (Atlanta, Lorraine, on two continents, North America and Europe) can earn the Georgia Tech Global Engineering Immersion Program (GEIP) Certificate when they receive the Georgia Tech M.S. degree. Over 110 ECE faculty members are involved in 11 areas of research and education: bioengineering, computer systems and software, digital signal processing, electrical energy, electromagnetics, electronic design and applications, nanotechnology, optics and photonics, systems and controls, telecommunications, and VLSI systems and digital design: and the School is either home to or a key player in almost 20 research centers and consortia. ECE is key to Georgia Tech's growing reputation as an internationally recognized educational and research and development university. ECE is firmly committed to sustaining excellence in traditional areas of strength and venturing into burgeoning areas of opportunity. The Signal Lab in the School of Electrical and Computer Engineering at Georgia Tech is seeking a Research Scientist to lead and advance cutting-edge research in Artificial Intelligence. The role will involve laboratory management, project oversight, and business development activities to name a few. 1. Research Leadership in Foundation Models, World Models, and Frontier AI • Lead and execute advanced research programs in large-scale AI, including foundation model architectures, multimodal representation learning, world models, agentic systems, and self-supervised learning at scale., • Design and evaluate new training algorithms, model architectures, and scalable pipelines for language, vision, audio, robotics, simulation, and multi-agent environments., • Develop GPU-, TPU-, and cluster-optimized training frameworks, distributed training systems, and inference-time optimization pipelines for next-generation AI models., • Publish high-impact papers in top AI/ML venues, release open-source tools, and contribute to Georgia Tech's AI research leadership and national strategic priorities. 2. Lab Management and AI Compute Infrastructure Operations • Oversee daily operations of the AI research lab, including GPU clusters, high-performance storage, distributed training stacks, and data governance frameworks., • Manage, maintain, and expand high-performance compute infrastructure: multi-node GPU clusters, distributed data loaders, RL/simulation environments, and model evaluation frameworks., • Ensure safety, compliance, documentation, model governance, data integrity, and continuous uptime of compute and AI assets., • Build automated pipelines for model training, experiment reproducibility, dataset generation, benchmarking, and large-scale evaluation. 3. Affiliate Engagement, Business Development, and Partnerships • Engage, onboard, and support affiliate companies participating in the AI and foundation model research program., • Serve as a technical liaison for affiliates across AI labs, cloud providers, robotics companies, semiconductor partners, government agencies, and enterprise AI users., • Define joint research thrusts, scoping documents, datasets, deliverables, evaluation protocols, and IP structures for partner organizations., • Coordinate demos, campus visits, model showcases, and affiliate meetings to support collaboration and knowledge transfer. 4. Project Management and PhD Mentorship • Mentor PhD students, postdocs, and research engineers working on foundation models, world models, agentic systems, and large-scale representation learning., • Manage multi-PI, multi-institution, and affiliate-funded AI research efforts, ensuring timely execution, publications, deliverables, reporting, and stakeholder satisfaction. Bachelor's Degree in Electrical Engineering, Physics, or related area. Research Scientist/Engineer II • A Master's degree and three (3) years of relevant full-time experience after completion of that degree,, • A Master's degree and five (5) years of relevant full-time experience after completion of a Bachelor's degree, or, • A Master's degree and seven (7) years of relevant full-time experience after completion of that degree,, • A Master's degree and nine (9) years of relevant full-time experience after completion of a Bachelor's degree, or, • A Doctoral degree and four (4) years of relevant full-time experience after completion of a Bachelor's degree., • PhD in Computer Science, Electrical and Computer Engineering, Machine Learning, or a closely related field with emphasis on AI or large-scale model development., • Strong research record in foundation models, world models, representation learning, multimodal AI, distributed training, or agentic systems., • Hands-on experience with large-scale model training using GPUs/TPUs, distributed systems, deep learning frameworks (PyTorch, JAX, TensorFlow), and data pipelines., • Demonstrated experience mentoring students or leading technical AI teams. The University System of Georgia is comprised of our 26 institutions of higher education and learning as well as the System Office. Our USG Statement of Core Values are Integrity, Excellence, Accountability, and Respect. These values serve as the foundation for all that we do as an organization, and each USG community member is responsible for demonstrating and upholding these standards. More details on the USG Statement of Core Values and Code of Conduct are available in USG Board Policy 8.2.18.1.2 and can be found on-line at ___. Additionally, USG supports Freedom of Expression as stated in Board Policy 6.5 Freedom of Expression and Academic Freedom found on-line at ___. The Georgia Institute of Technology (Georgia Tech) is an Equal Employment Opportunity Employer. The Institute is committed to maintaining a fair and respectful environment for all. To that end, and in accordance with federal and state law, Board of Regents policy, and Institute policy, Georgia Tech provides equal opportunity to all faculty, staff, students, and all other members of the Georgia Tech community, including applicants for admission and/or employment, contractors, volunteers, and participants in institutional programs, activities, or services. Georgia Tech complies with all applicable laws and regulations governing equal opportunity in the workplace and in educational activities. Equal opportunity and decisions based on merit are fundamental values of the University System of Georgia ("USG") and Georgia Tech. Georgia Tech prohibits discrimination, including discriminatory harassment, on the basis of an individual's race, ethnicity, ancestry, color, religion, sex (including pregnancy), national origin, age, disability, genetics, or veteran status in its programs, activities, employment, and admissions. Further, Georgia Tech prohibits citizenship status, immigration status, and national origin discrimination in hiring, firing, and recruitment, except where such restrictions are required in order to comply with law, regulation, executive order, or Attorney General directive, or where they are required by Federal, State, or local government contract. This is not a supervisory position. This position does not have any financial responsibilities. This position will not be required to drive. This role is not considered a position of trust. This position does not require a purchasing card (P-Card). This position will not travel This position does not require security clearance. Successful candidate must be able to pass a background check. Please visit ___

Classification: Non-Exempt We are Alsco Uniforms. We've been working hard for our customers since 1889 when we invented the uniform and linen rental industry. Alsco Uniforms has grown into a worldwide leader serving over 350,000 customers in 13 countries. It's our job every day to make every aspect of the customer experience better. Whatever our customers need, Alsco Uniforms finds the answers that work for them. Our employees are the heart and soul of Alsco Uniforms. As a result, we have a long history of strong financial performance, continuous improvement, and customer service. We're seeking driven professionals with ambition to grow within our company. We'd love to talk to you about how you can fit into our team of diverse individuals and how your hard work will be rewarded with competitive pay and benefits and ongoing career development. Join our team and build your career with Alsco Uniforms! Job Summary: The Maintenance Worker is responsible for regular preventative maintenance of large industrial textile processing equipment, as well as facility maintenance. Assists the Maintenance Technician and/or Chief Engineer as required. This position reports to the Chief Engineer. Our full-time employees enjoy: • 401K Plan with Company Match, • Medical, Dental, Vision, FSA/HSA, • Life Insurance, Disability Insurance, • Vacation, Sick Time, Holidays, • Choice of Global Cash Card or Direct Deposit, • Career Advancement, • Learning & Development Opportunities Essential Functions: • Performs basic maintenance duties, including monitoring oil levels and performing regular preventative maintenance of grease fittings, lint traps, shaker screen barrels, limited electrical troubleshooting., • Relies on instructions and pre-established guidelines to perform the functions of the job., • Relies on limited experience and judgment to plan and accomplish goals., • A certain degree of creativity and latitude is required., • Assists in problem resolution in an effort to minimize equipment downtime., • Looks for opportunities to continually improve maintenance processes, • Works with all plant personnel in a cooperative and professional manner., • Strictly adheres to all safety rules, policies and procedures required by Alsco, law, and what is recognized as common practice in the industry., • Ensures work is performed safely and efficiently., • Follows written and verbal instructions and performs other tasks as directed by supervision., • Complies with all Federal, State and local laws. Additional Functions: • May work with and support other branch personnel as required by supervision., • Drive and pick up parts, transport equipment, parts, etc. Qualifications: • Have and maintain a valid driver's license and driving record free of chargeable accidents, speeding or other safety violations., • Demonstrate adequate mechanical aptitude., • Proficient in the proper use of power and hand tools., • Good verbal and written communication skills in English, ability to comprehend and follow direction, perform basic math, good time management and team member skills., • Must be a team player with enthusiasm, initiative, and pride in work well done; self-starter dedicated to continual quality improvement. Education: • High school graduate or equivalency preferred. Typical Physical Activity: • Standing, sitting, walking, bending, stooping, reaching, twisting, kneeling, working in confined areas, reaching overhead, driving a forklift, grasping, moving equipment, pushing, pulling, moving loaded carts weighing up to 500 lbs, lifting and carrying up to 100 lbs, reading, writing, speaking, hearing. Typical Environmental Conditions: • Inside and outside areas of a typical industrial laundry facility, which includes working with and around large machinery, variations in temperature, noise, odors, humidity, lint and dust, in general offices or on outside grounds. Travel Requirements: • Occasionally, such as to procure parts. The Maintenance Worker must perform the essential duties and responsibilities with or without reasonable accommodation efficiently and accurately, and without causing significant safety threat to self or others. The statements made herein are intended to describe the general nature and level of work being performed by employees assigned to this job classification. They are not intended to be construed as an exhaustive and inclusive list of all responsibilities, duties, and/or skills required of personnel so classified. For a general description of benefits that are being offered for this position, please visit alsco.com/benefits. Alsco Uniforms is an Equal Employment Opportunity Employer. Candidates are considered for employment with Alsco Uniforms without regard to their race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status (specifically status as a disabled veteran, recently separated veteran, armed forces service medal veteran, or active duty wartime or campaign badge veteran), or other classification protected by applicable federal, state, or local law. Revised: 04/29/2022 Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

At EBI we're committed to providing deep technical, industry and commercial real estate expertise to help our clients navigate complexity and realize maximum value for their assets. For 35 years we've been helping investors, lenders, owners, developers, contractors, and property managers mitigate risk and optimize their built facilities for maximum economic, safety, and environmental value. We're unique in our ability to deliver high quality, responsive services across the entire asset lifecycle, from rapid assessments, to advisory, to implementation and verification services, nationwide. Unlike other environmental consulting firms, we provide the full suite of commercial real estate and asset management services through to improvement and verification. Our experts leverage our proprietary assessment methodologies, benchmarking, regulation, and analytics tools across six core domains. EBI is your environmental, sustainability, engineering and health and safety partner, nationwide. Assess. Advise. Improve. Verify. Position Summary EBI is seeking a full-time Senior Assessor to conduct Acquisition Property Condition Reports (APCR). APCRs are specialized assessments and deliver a significantly higher standard than a traditional ASTM-level report. APCRs provide real estate investors with actionable information that drives the best investment decisions and customized, relevant solutions based on solid comprehension of the property condition. Our consulting requires greater collaboration between our specialist team and our clients, defining and executing a scope of work unique to the project needs. The successful candidate will perform field assessments of various real estate property types, conduct interviews of onsite representatives, and independent research of local, state, and federal resources. Reporting may also include specialized evaluation of roofing, MEP, facade, and other building components. This position reports directly to the Senior Program Manager and will be a remote, work from home position. The majority of clients this position will support will be located in or around the Atlanta, GA and Charlotte, NC markets, so candidates will need to already be established in these markets. This is a field-based position, with upwards of 50% local and regional travel expected. Candidates must have previous experience with travel and be comfortable with this model to be considered. Essential Duties and Responsibilities • Conduct site reconnaissance for a wide variety of real estate property types; including but not limited to office, retail, multifamily, hospitality, and industrial, • Prepare deliverables with quality supporting documentation (site figures, appendices), • Assessment reporting will address the current condition of significant building and site components (i.e., roof, facade, HVAC, etc.), evaluate effective useful life of key components, and address the need and timing of replacement and/or repair, • Travel on short notice (one week or less) will be required at times, • This position will be a remote location based from a home office Qualifications and Capabilities • Bachelor's degree from accredited college or university in architecture, engineering, construction, or related field, • Significant professional experience in engineering and due diligence consulting and/or seven or more years in architecture, construction, facilities management, or other real estate consulting service, • This position requires technical writing responsibilities and direct interactions with clients. The successful candidate must possess excellent written and verbal communications skills., • Professional Engineer (PE) or Registered Architect (RA) certification is a plus, • Specialized expertise in significant building components such as roofing, facades, and/or mechanical systems is desirable Application Disclaimer At EBI, we cultivate a welcoming and collaborative culture. We are proud to be an Equal Employment Opportunity employer and encourage diverse candidates to apply. We do not discriminate against qualified individuals based on their status as a protected veteran or individuals with disabilities, nor do we discriminate based on sex, race, color, religion, national origin, age, marital status, gender identity, gender expression, or sexual orientation. All vendors are expected to maintain a working environment free from discrimination or harassment. The reasonable estimate of the salary range for this position is $85,000 - $130,000. The salary range describes the minimum to maximum base salary range for this position across applicable US locations. This position may also be eligible for a bonus whereby total compensation may exceed base salary depending on individual performance. The actual compensation offered will be based on a range of factors that are considered in making compensation decisions including, but not limited to; geographic location, work experience, education, licensure requirements, knowledge, skills/level, qualifications and budget. For an overview of our benefits, please refer to our website. #LI- Atlanta #LI-Charlotte Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

ABOUT ENOVIS Enovis Corporation (NYSE: ENOV) is an innovation-driven medical technology growth company dedicated to developing clinically differentiated solutions that generate measurably better patient outcomes and transform workflows. Powered by a culture of continuous improvement, global talent and innovation, the Company's extensive range of products, services and integrated technologies fuels active lifestyles in orthopedics and beyond.For more information about Enovis, please visit ___. What You'll Do At Enovis we pay attention to the details. We embrace collaboration with our partners and patients and take pride in the pursuit of scientific excellence - with the goal of transforming medical technology as we know it. Because that's how we change the lives of patients for the better. And that's how we create better together. Why work at Enovis? ___. The Enovis Co-Op program is recruiting for positions for the Summer 2026 term. This program requires a commitment to multiple semesters/periods working 40hrs/week in Atlanta, GA. The ideal candidate is pursuing a degree in Mechanical or Biomedical Engineering. The Engineering Co-op will work within one of the product segments of our Enovis Foot & Ankle division in Atlanta, GA. You will assist Product Development Engineers and the Manager of the product segment with all aspects of projects from proposal to final design/release. This will include working with a cross-functional team, consisting of upper-level product development engineers, marketing product managers, manufacturing engineers, regulatory and QA engineers, to design, development, and test orthopedic implants and instruments for foot and ankle applications. Job Title: Product Development Co-Op Reports To: Sr. Manager, Product Development Location: Atlanta, GA Business Unit Description: Enovis Foot & Ankle Job Title/High Level Position Summary: We are seeking a dynamic and motivated Summer Co-op to join our Product Development team. This Co-op offers a unique opportunity to gain hands-on experience in the fast-paced and exciting field of Medical Device Orthopedics. The selected candidate will work closely with experienced professionals, contributing to the manufacturing and operational processes that drive the production of cutting-edge orthopedic devices. Key Responsibilities: • Participates as an active member of the New Product Development Team:, • Assists to identify surgeon requirements and product characteristics., • Confers with cross-function teams (by way of example and not exclusion, Manufacturing Engineering, Purchasing and Regulatory); accepts and completes tasks as assigned., • Assists Product Development Engineers to create product designs, • Uses 3-D Modeling to document designs and design changes, • Assists to complete the Design Dossier, • Participates in surgeon symposia, focus groups and KOL (Key Opinion Leader) meetings., • Assists in road mapping projects., • Attends surgeries for learning purposes., • Perform market research to devise solutions to orthopedic/podiatric problems, including performing customer inquiries and analyzing existing products, • Maintains all documentation necessary for a Design History File (DHF), including Design Input Documents, Design Validation Plans/Reports, Test Protocols/Reports, and Design Input/Output Matrix., • Develops detail engineering drawings, CAD modeling and release through ECO system., • Works through internal prototype shop or contract through vendor on developing prototypes., • Schedules and directs product team meetings as needed in absence of PD engineer; assuring timeliness of project execution., • Maintains existing product lines and writes ECOs for general product improvement., • Relies on instructions and pre-established guidelines to perform the functions of the job., • Performs other duties as directed. Competency: To perform the job successfully, an individual should demonstrate the following competencies: • Analytical - Synthesizes complex or diverse information., • Design - Demonstrates attention to detail., • Problem Solving - Identifies and resolves problems in a timely manner; gathers and analyzes information skillfully; develops alternative solutions; uses reason even when dealing with emotional topics., • Project Management - Communicates changes and progress., • Technical Skills - Assesses own strengths and weaknesses; pursues training and development opportunities; strives to continuously build knowledge and skills., • Oral Communication - Speaks clearly and persuasively in positive or negative situations; listens and gets clarification., • Written Communication - Writes clearly and informatively; varies writing style to meet needs; able to read and interpret written information. Writes detailed test protocols/reports., • Quality Management - Looks for ways to improve and promote quality; demonstrates accuracy and thoroughness., • Business Acumen - Understands business implications of decisions., • Diversity - Shows respect and sensitivity for cultural differences; promotes a harassment-free environment., • Judgment - Exhibits sound and accurate judgment; includes appropriate people in decision-making process., • Safety and Security - Observes safety and security procedures; reports potentially unsafe conditions; uses equipment and materials properly., • Demonstrates commitment to the Enovis Compliance & Ethics Program, the Enovis Code of Conduct, the Enovis Sales and Marketing Code of Conduct, the AdvaMed Code of Ethics, and all supporting and applicable regulations, policies and procedures., • Demonstrates commitment to the Enovis Values, Mission and Vision. Education/Experience: • Must complete at least the first year of undergraduate degree in engineering and maintain a minimum overall GPA of 3.0., • Working on completion of a degree in Mechanical Engineering, Bio-medical Engineering with mechanical track emphasis, or equivalent., • Extreme interest in medical devices and/or orthopedics is required., • Experience MS Word, Excel and Project, • Experience with 3D CAD packages (SolidWorks preferred) Travel Requirements: • Ability to travel to the Atlanta, GA office on a daily basis Work Environment / Physical Demands: • Climate controlled workspace, • Typical warehouse environment, including the ability to lift up to 25 lbs., • Physical Demands: standing, sitting, climbing, crouching/kneeling, lifting, carting, etc. "Creating better together". It's the Enovis purpose, and it's what drives us and empowers us every day on a global scale. We know that the power to create better - for our customers, our team members, and our shareholders - begins with having the best team, pursuing common goals, operating at the highest levels, and delivering extraordinary outcomes. What does creating better together mean to us at Enovis? Discover the "why" behind our purpose, values and behaviors: ABOUT ENOVIS Enovis Corporation (NYSE: ENOV) is an innovation-driven medical technology growth company dedicated to developing clinically differentiated solutions that generate measurably better patient outcomes and transform workflows. Powered by a culture of continuous improvement, global talent, and innovation, the company's extensive range of products, services, and integrated technologies fuels active lifestyles in orthopedics and beyond. Visit ___ to learn more. EQUAL EMPLOYMENT OPPORTUNITY Enovis provides equal employment opportunities based on merit, experience, and other work-related criteria without regard to race, color, ethnicity, religion, national origin, sex, age, pregnancy, disability, veteran status, or any other status protected by applicable law. We also strive to provide reasonable accommodation to employees' beliefs and practices that do not conflict with Enovis policies and applicable law. We value the unique contributions that every employee brings to their role with Enovis. Join us in creating better together. EOE AA M/F/VET/Disability Statement All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, religion, color, national origin, sex, protected veteran status, disability, or any other basis protected by federal, state or local laws.

___Job ID295012 LocationAtlanta, Georgia Full/Part TimeFull-Time Regular/TemporaryRegular ______ No job description available The Campus Engineering team exists to provide support to all aspects of design, construction, operation, and maintenance of campus facilities. Campus facilities include not only the buildings which are occupied by our students, faculty and staff, but it also includes central campus utility plants and the associated utility systems, including chilled water, steam, power, and natural gas During the design process, first, our Team creates and maintains the design standards for building systems, including HVAC, plumbing, power distribution, and lighting. These standards are used by us, and by our outside consultants, to guide the design efforts of new buildings and renovation projects. Our team is also responsible for reviewing the design documents created by the consultants to ensure that their designs comply with standards. During construction projects, our Team is often called upon to provide advice related to unforeseen conditions which are discovered during demolition work. We often provide a second review of material and equipment submittals, as well as shop drawings. On most campus construction projects, the day-to-day interaction with the contractor is managed by our co-workers within one of the Construction teams. However, on a few projects we may be called on to manage those day-to-day contractor activities. Post construction, and throughout the life of the facilities, our team serves to provide advice to our Operation & Maintenance teams, and our Utilities Maintenance team, when a problem grows larger than their capacity. We also plan and prepare the way for projects to replace equipment as it nears the end of life. We are always looking ahead for opportunities to increase efficiency and resiliency in the systems. If you have experience in this type of work, please consider applying to join our Team. Lead in and perform advanced electrical engineering services in support of either the operation and maintenance of the campus electrical distribution system or the design, construction and operation of electrical equipment, components or systems associated with research efforts within an academic or research unit. Responsible for setting employee goals, assessing performance, providing feedback and making pay recommendations. This position will interact on a consistent basis with: facilities management and utilities personnel or research management and faculty; co-workers, vendors, suppliers and contractors. This position typically will advise and counsel: management, engineering and technical personnel. This position will supervise: electrical engineering personnel. Job Duty 1 - Supervise and participates in the design, installation and testing of electrical/electronic components Job Duty 2 - Develop engineering project schedules and make work assignments Job Duty 3 - Conduct analyses of electrical/electronic system performance Job Duty 4 - Develop plans and specifications for electrical systems Job Duty 5 - Troubleshoot electrical systems; may involve oversight of calibration and repair work Job Duty 6 - Prepare drawings, schematics diagrams and related documentation associated with electrical components and systems Job Duty 7 - Manage project engineering budgets Job Duty 8 - Interact with vendors regarding procurement and delivery issues Job Duty 9 - Conduct project reviews for conformance to quality standards and compliance Job Duty 10 - Perform other duties as assigned Educational Requirements Bachelor's Degree in Electrical Engineering or Engineering Technology or equivalent combination of education and experience Other Required Qualifications Overnight travel required for project delivery; flexibility in on-site daily service delivery hours (due to client shift schedules, project requirements) Required Experience Six to eight years of job related experience Additional Preferred Qualifications LEED Certification , Fundamentals Examine (FE) or Engineer-in-training (EIT) certified, Georgia Professional Engineering License Preferred Educational Qualifications Master's Degree in Electrical Engineering SKILLS This job requires knowledge and skill in advanced application of electrical engineering principles, processes and practices. Additionally, skill in application of regulations, codes and safety practices associated with electrical systems; project management; utilization of basic and advanced computer applications including those specific to areas of responsibility and communications are required. The University System of Georgia is comprised of our 25 institutions of higher education and learning as well as the System Office. Our USG Statement of Core Values are Integrity, Excellence, Accountability, and Respect. These values serve as the foundation for all that we do as an organization, and each USG community member is responsible for demonstrating and upholding these standards. More details on the USG Statement of Core Values and Code of Conduct are available in USG Board Policy 8.2.18.1.2 and can be found on-line at ___. Additionally, USG supports Freedom of Expression as stated in Board Policy 6.5 Freedom of Expression and Academic Freedom found on-line at ___. Overview Georgia Tech prides itself on its technological resources, collaborations, high-quality student body, and its commitment to building an outstanding and diverse community of learning, discovery, and creation. We strongly encourage applicants whose values align with our institutional values, as outlined in our ___. These values include academic excellence, diversity of thought and experience, inquiry and innovation, collaboration and community, and ethical behavior and stewardship. Georgia Tech has policies to promote a healthy work-life balance and is aware that attracting faculty may require meeting the needs of two careers. About Georgia Tech Georgia Tech is a top-ranked public research university situated in the heart of Atlanta, a diverse and vibrant city with numerous economic and cultural strengths. The Institute serves more than 45,000 students through top-ranked undergraduate, graduate, and executive programs in engineering, computing, science, business, design, and liberal arts. Georgia Tech's faculty attracted more than $1.4 billion in research awards this past year in fields ranging from biomedical technology to artificial intelligence, energy, sustainability, semiconductors, neuroscience, and national security. Georgia Tech ranks among the nation's top 20 universities for research and development spending and No. 1 among institutions without a medical school. Georgia Tech's Mission and Values Georgia Tech's mission is to develop leaders who advance technology and improve the human condition. The Institute has nine key values that are foundational to everything we do: 1. Students are our top priority., 2. We strive for excellence., 3. We thrive on diversity., 4. We celebrate collaboration., 5. We champion innovation., 6. We safeguard freedom of inquiry and expression., 7. We nurture the wellbeing of our community., 8. We act ethically., 9. We are responsible stewards. Over the next decade, Georgia Tech will become an example of inclusive innovation, a leading technological research university of unmatched scale, relentlessly committed to serving the public good; breaking new ground in addressing the biggest local, national, and global challenges and opportunities of our time; making technology broadly accessible; and developing exceptional, principled leaders from all backgrounds ready to produce novel ideas and create solutions with real human impact. The Georgia Institute of Technology (Georgia Tech) is an Equal Employment Opportunity Employer. The Institute is committed to maintaining a fair and respectful environment for all. To that end, and in accordance with federal and state law, Board of Regents policy, and Institute policy, Georgia Tech provides equal opportunity to all faculty, staff, students, and all other members of the Georgia Tech community, including applicants for admission and/or employment, contractors, volunteers, and participants in institutional programs, activities, or services. Georgia Tech complies with all applicable laws and regulations governing equal opportunity in the workplace and in educational activities. Equal opportunity and decisions based on merit are fundamental values of the University System of Georgia ("USG") and Georgia Tech. Georgia Tech prohibits discrimination, including discriminatory harassment, on the basis of an individual's race, ethnicity, ancestry, color, religion, sex (including pregnancy), national origin, age, disability, genetics, or veteran status in its programs, activities, employment, and admissions. Further, Georgia Tech prohibits citizenship status, immigration status, and national origin discrimination in hiring, firing, and recruitment, except where such restrictions are required in order to comply with law, regulation, executive order, or Attorney General directive, or where they are required by Federal, State, or local government contract. This is not a supervisory position. This position does not have any financial responsibilities. This position will not be required to drive. This role is not considered a position of trust. This position does not require a purchasing card (P-Card). This position will not travel This position does not require security clearance. Job Code: S8 Pay Range Starting At: $86,136.00 -$117,145.00 Location: Atlanta, GA Successful candidate must be able to pass a background check. Please visit ___

Regular Full time At the heart of CSA Group is a vision: making the world a better, safer, more sustainable place. It's been part of our mission for nearly one hundred years: from the first engineering standard for railway bridges developed in 1919, to more than 3,500 standards, codes & related products today. Headquartered in Canada, with a global footprint of more than 30 labs and offices across Europe, Asia and North America, CSA Group tests, inspects and certifies a wide range of products - from every day househould items to leading edge technology-to meet exacting requirements for safety, performance and environmental impact. Our employees take pride in making a difference in people's lives through the work that we do. We're looking for people like you to help make it happen. Job Summary: The Technical Specialist will serve as the technical expert in the commercial development of new accounts or the development of new opportunities with established accounts . To protect the CSA Group marks as the premier mark by ensuring current CSA Group customer satisfaction, while promoting the use of CSA Group for new or expanded services. Responsibilities: * Provides technical guidance and mentoring within assigned product group. * Mentors junior certifiers and lab staff as required. * Performs certification projects and project reviews (Full category) as required to maintain technical qualifications. * Actively seeks value added opportunities that increases customer interest and promotes the use of new services for CSA Group. In collaboration with the Account Managers, contacts inactive and former CSA Group customers to attempt to regain work. Communicates with appropriate Operations staff as required during the sales process. * Responds promptly to all technical sales inquiries and visits with clients as necessary. Prioritizes work assignments and follow up responses to clients inquires and proposals in coordination with the commercial team. * In partnership with the SAM, Account Managers & Commercial Director, establishes and maintains account relationships to meet personal sales targets, emphasizing the expanded use of CSA Group services. * Prepares written pricing proposals for services for clients, working with the commercial team and as required with the technical operations staff. * Participates in associations and outside organizations deemed appropriate by the commercial business unit leader. Establishes and maintains a list of contacts to be shared with others on team. * Manages the relationship with clients by determining client needs and expectations. Relates necessary information to operations to maintain customer satisfaction. * Represents CSA Group at assigned trade shows, exhibits, conferences and client presentations. Identifies and communicates business opportunities and competitive trends. Executes defined market strategies and business initiatives, as assigned. * Provides periodic written reports on calls, customer contact, proposals, quotes, expenses, travel and tradeshow activities, as well as oral presentation as required. * Evaluates industry reports, territory databases, external competitive information and develops territory analysis or provides input to others for presentation and reporting to manager. * Works cooperatively with others, as the lead or the support person in calls, trade shows, and presentations. * Maintains positive contacts within organization to exchange, explain and interpret information or ideas and follow up on client's requests. * Participates in CSA Group Technical Network, Technical Panel as required and may support international standards development. As a technical authority both inside CSA Group and across industry may participate in technical committees, authoring technical papers, etc. * Ability to prepare project quotations for cost and time. Classify product by use, environment and function. Determines applicable requirements / test / standards. Determine sample requirements and method / location for testing / evaluation best suited to customers' needs. * Explains the different product certifications programs available to clients and the requirements for control of production. * Is able to explain test rationale and outcomes to customers. * Becomes fully knowledgeable in all national / international standards through research of standards, documentation, bulletins and technical articles and participates in Standards development work. * Shares knowledge with other staff and CSA Group as a whole through written or verbal communication and training events. Education & Experience: * Bachelor's Degree in Engineering with Registration as a Professional Engineer, with six or more years of experience in specific commercial unit's industry; or a three years College Diploma in a relevant technological discipline, with six or more years of work experience in similar industry * Fully qualified certifier for assigned product group * Knowledge of CSA Group, UL and IEC standards; variety of test procedures, programs and services * Mentoring skills * Sales or Marketing experience preferred * Computer proficiency (word processing); keyboarding * Strong problem-solving ability; detail oriented * Ability to work independently * High level of communication skills (verbal and written) Excellent listening and retention skills * High level of initiative to meet or exceed targeted goals with minimal supervision * Ability to cope with unpredictable schedule, regular work interruptions, multiple deadlines and targeted goals * Independent sales generation and/or customer account management (telemarketing, marketing, sales) * Public speaking - oral and written proposal and presentations * Initiate and ability to develop new customer contacts * Responsive and pleasant when dealing with external and internal customers, peers and co-workers * Flexible in schedule and time management * Strong organization, creativity and project management skills to plan for projects, events and conferences * Problem resolution skills, to deliver high quality and timely services

Regular Full time At the heart of CSA Group is a vision: making the world a better, safer, more sustainable place. It's been part of our mission for nearly one hundred years: from the first engineering standard for railway bridges developed in 1919, to more than 3,500 standards, codes & related products today. Headquartered in Canada, with a global footprint of more than 30 labs and offices across Europe, Asia and North America, CSA Group tests, inspects and certifies a wide range of products - from every day househould items to leading edge technology-to meet exacting requirements for safety, performance and environmental impact. Our employees take pride in making a difference in people's lives through the work that we do. We're looking for people like you to help make it happen. CSA Group has an immediate opening for a Field Certification Engineer (Hazardous Locations) based in the United States to join their North American Field Certification team. You will be responsible for the field certification and/or evaluation of hazardous location products at client sites to ensure compliance with specific electrical safety standards. This role involves travel, on-site evaluations, field testing, and making compliance decisions for products ranging from small batches of control panels to large, complex assemblies or manufactured skids. As an accredited third party compliance testing company, we play a large role in ensuring safety of these products. Responsibilities: * Independently conduct on-site and off-site field certification and evaluation of products to determine compliance with applicable standards and codes (NEC/CEC). Identify and document rationale for compliance or non-compliance. * Travel to client locations predominantly in the Western United States with infrequent travel internationally to Canada and Europe. * Demonstrate a strong understanding of the field certification and field evaluation process, accreditation requirements, and quality management procedures. * Participate in ongoing training and continuing education programs to stay current with changes in codes, standards, and other requirements. * Prepare communications of findings, including corrective actions, certification reports, certificates of compliance, and other related CSA documentation for clients. * Prepare quotation input on project scope, standards, time required for project completion. Classify product by use, environment, and function. * Conduct witness test programs at the manufacturer's accredited laboratory as needed. Qualifications: * Post Secondary Degree in Engineering, Engineering Technology or related Sciences; or experience as a Licensed Journeyman Electrician; or experience in a related technical field. * Ability to travel as needed with short notice (up to 75% travel). * Ability to manage multiple complex projects and changing schedules and deadlines withsupervision. * Strong conflict resolution skills to be able to handle difficult situations. * Experience with U.S., Canadian, and other international product safety standards (e.g. CSA/UL/IEC 60079 series, CSA 22.2 No 213, CSA C22.2 No 14, NFPA 496, ANSI/UL 121201, UL 12030) * Familiar with the National Electrical Code (NEC) and Canadian Electrical Code (CEC). * Previous field evaluation experience (desirable). * Experience working with Authorities having Jurisdiction (AHJ) and/or with National Recognized Test Laboratories (NRTL). (desirable). * Ability to read and interpret engineering drawings and test data. * Knowledge of electrical test equipment. * Excellent communication skills (verbal and written). * Strong interpersonal skills; self-starter; good decisions-making skills and organizational skills. * A valid driver's license is required. Physical Requirements: * Must be able to lift and carry up to 50 pounds regularly. * Ability to stand, walk, and bend for extended periods. * Must be able to pass site-specific training and certification.

Join Our Innovative Team as an Electrical Engineer - Shape the Future of Energy Solutions! Are you passionate about pushing the boundaries of energy technology? We're looking for a talented Electrical Engineer to be a key player in our building improvement projects. In this role, you'll design cutting-edge electrical infrastructure to help clients achieve their energy goals with smart, sustainable solutions. At Willdan, you'll join a collaborative and diverse team of mechanical and electrical engineers, solar design experts, project managers, and more. Together, we work to create resilient, efficient, and cost-effective electrical distribution systems that meet the highest standards of excellence. As an Electrical Engineer at Willdan, your contributions will directly impact the future of energy systems. You'll have the opportunity to: • Lead Innovation: Create and design creative electrical systems that transform how energyis used., • Collaborate Across Teams: Work alongside experts in multiple fields to deliver groundbreaking solutions., • Drive Change: Take ownership of projects and make a real impact on the success of our clients' energyobjectives. The Senior Electrical Engineer is responsible for designing the Electrical Infrastructure for our building energy conservation projects. The ideal candidate will have an advanced understanding of power distribution and Distributed Energy Systems (DERs) as it applies to high performance buildings across various vertical markets including commercial, local & state governments, light industrial, educational and health care facilities. Essential Duties and Responsibilities • Experience with electric building design. Design electrical systems upgrades and improvements to improve energy efficiency. Point to Point understanding of power distribution and interconnection to the Utility Grid to the Service Entrance down to the end use receptacle. Advanced knowledge of energy conservation guidelines using IECC, Title24 and projects with LEED Certification., • Fundamentals of Power Distribution. Advanced Understanding of electrical theory covering 3-phase and 1-phase power, power triangle & power factor, Grounding, Principles of Magnetism applied to Transformers and Motors., • Perform Complex Engineering Calculations & Analysis (see qualifications below). In-depth understanding of software apps and resources used in Electrical Engineering (SKM, ETAP, CYME, Excel Tools, etc.)., • Stand By Power and Alternative Energy Sources. Size combustion generators as it applies to high-performance buildings and electrical distribution systems, automatic transfer switches. Emphasis on integrating DER components including PV, BESS and EV charging. Exposure to microgrid design and/or integrating BESS and microgrid controls into solar PV and EV infrastructure projects is a bonus., • Strong Understanding of utility interconnection requirements. Design the electrical infrastructure and protective relays required by the utility for on-site generation. Support the DER team and their efforts as they work with utility providers to submit the required documentation and complete the utility interconnection process., • Excellent Time Management Skills. Ability to work on multiple projects of varying complexities. Ability to work on concurrent projects across multiple geographical regions. Work under limited supervision., • Prioritize Workflow. Able to prioritize project workflow to meet deadlines with minimal supervision, completing projects on time. Paying special attention to quality, accuracy and effort against budget., • Succeed as a Team. Enjoy working within design teams and meeting the project goals in a team-focused environment. Collaborate with other disciplines. Work with local agencies having jurisdiction to ensure compliance with federal, state and municipal requirements and building codes. Support company standards, work with project managers to exceed client expectations., • Forward Thinking. Leverage your creativity and explore new technologies and products., • Supports design team efforts to identify, recommend, and implement new technologies and systems to improve organizational processes and decision-making. Develop innovative solutions that reduce costs with no impact on quality, or long term reliability., • Ability to research new concepts, technologies and apply integrate into our projects., • Start to Finish. You will develop concepts from the ground up. Use information from site visit to develop concept. Produce construction drawings (CDs) using CAD software. Complete CDs and apply for permit. Work with construction teams and contractors to see our designs installed in the field. Review and approval of equipment submittals., • Articulate. The candidate must possess excellent verbal and written communication skills, as well as interpersonal skills. Comfortable presenting to clients, team members and internal leadership., • Occasional Travel Required (~15%). Site visits to document the existing infrastructure. Provide engineering evaluations, electrical systems audits, and construction support as needed., • Bachelor's degree or higher. Electrical engineering, architectural engineering, or building science from a fully accredited ABET program., • PE License is Required., • 8+ years of electrical design experience with commercial, education, government or light industrial projects typically at an MEP consulting firm., • Advanced Understanding of low voltage systems 600V and lower, both AC and DC distributions. Includes 480/277V, 208/120V and 240/120V systems, single phase or three phase. Medium Voltage experience is a plus., • Perform Engineering Calculations. Includes: fault current studies, Arc Flash Analysis, Selective Coordination Studies, Service Entrance Calculations, Transformer Sizing, Overcurrent Protection of Motors & Transformers, Conduit Fill and Conductor Sizing with applicable derating factors., • Knowledge of applicable building codes and regulations including IEEE, NFPA, NEC (NFPA70), California Electric Code (CEC) & Title 24, UL Listings, Life Safety, IBC, and OSHA., • Technical Understanding of Grounding and Bonding., • Expansive product knowledge of manufacturers (Eaton, Schneider, ABB, Siemens, etc.)., • Ability to size and specify distribution equipment: diesel generators, electrical switchgear & switchboards, panelboards, disconnect switches, etc., • Assemble and compile Division26 specifications., • Take Ownership of Projects. Ability to take a project from the initial site visit into preliminary design through Construction Drawing completion. Stay actively involved with the project during the permit process and into Construction., • Proficient in AutoCAD, Revit is a plus., • Skilled in Microsoft Office, Excel, and Teams; working knowledge of Bluebeam Revu. Willdan Energy Solutions participates in E-Verify.

Job Description Direct Reports: Concierge and Maintenance employees (other on-site employees of HomeOwners Advantage) Indirect Reports: 3rd party service vendors. • Operation/Service coordination, including but not limited to:, • Dispatch maintenance service requests, and work with engineer to prioritize daily list., • Solicit bids for work in the building by contract and 3rd party service providers. Manage quality of their work and projects., • Direct liaison to Residents and Board members in coordinating all aspects of common area management, project construction, move in/out, and general operations., • Understand and operate all management systems proficiently., • Manage process improvement., • Create annual business plan and deliver services to the community as outlined in the business plan, • Responsible for inputs to financial processes – A/R, A/P, Security Deposits, etc..., • Expense management to include scanning and coding all invoices in Vantaca., • Collect all HOA dues, rent, or fees each month., • Assess and collect fines, late fees, damage assessments, security deposits/returns, utility deposits/returns, concessions, and miscellaneous income., • Create and adhere to annual operating budgets., • Create and distribute the monthly financial packets inside the contracted timeframe., • Deliver excellent resident service through the following:, • Author and deliver building announcements, • Maintain an accurate website, • Proactively communicate with the Board on property issues including weekly update to the Board using the HomeOwners Advantage template., • Coordinate annual fire/life safety drills., • Serve as a resource for marketing and leasing (where applicable) by:, • Understanding property metrics (market rates, % leased, basic info), • Be able to explain building amenities to prospective tenants, • Collection of marketing data, • Contribute to leadership and people development by:, • Managing vendors in the building., • Executing on personal training plan., • Develop and deliver objectives and performance appraisals of direct reports

Are you a hands-on problem solver with a knack for keeping things running smoothly? We're looking for a skilled Property Engineer to join our team and help maintain the comfort, safety, and functionality of our property.

Datavant is the data collaboration platform trusted for healthcare. Guided by our mission to make the world's health data secure, accessible and actionable, we provide critical data solutions for organizations across the healthcare ecosystem - including providers, health plans, researchers, and life sciences companies. From fulfilling a single patient's request for their medical records to powering the AI revolution in healthcare, Datavanters are building the future of how data is connected and used to improve health. By joining Datavant today, you're stepping onto a driven and highly collaborative team that is passionate about creating transformative change in healthcare. What We're Looking For A senior security engineer to help build and evolve an engineering-driven vulnerability management program, focused on turning vulnerability data into clear, actionable risk signals embedded in modern engineering workflows. This role emphasizes automation, systems design, and practical risk reduction across application, cloud, and infrastructure environments. It is not primarily a tool-operations, ticket-tracking, or audit-administration role. What You Will Do You Will: * Design, build, and operate an engineering-first vulnerability management capability for Datavant's applications and infrastructure, with a primary focus on reducing real exploit risk. * Build and maintain automation and data pipelines that ingest, normalize, correlate, and prioritize vulnerability signals across multiple sources, treating vendor tools as inputs rather than systems of record. * Develop self-service, engineer-facing dashboards and workflows that provide clear prioritization and actionable insight, rather than compliance-only reporting. * Partner closely with product and engineering teams to assess vulnerability risk in context, communicate exploitability and impact clearly, and recommend practical remediation or mitigation options. * Embed high-confidence vulnerability signals into existing engineering workflows (CI/CD, PRs, backlogs) to drive adoption with minimal friction. * Drive vulnerability risk reduction by validating that remediation or compensating controls meaningfully reduce exposure, rather than tracking ticket closure alone. * Translate compliance control intent into scalable, low-friction engineering implementations that produce audit-ready evidence through automation. * Serve as a technical subject matter expert during FedRAMP and other assessments by validating controls, remediation effectiveness, and technical evidence, without owning manual audit administration. * Lead and execute technical projects that advance Datavant's vulnerability management and application security capabilities. * Act as a senior technical leader and influencer, shaping program direction through sound engineering judgment, hands-on execution, and cross-functional collaboration. What You Need to Succeed * Deep technical expertise in vulnerability management and application security, with hands-on experience assessing, prioritizing, and reducing vulnerability risk in modern software environments. * Strong engineering background with demonstrated ability to design, build, and automate solutions (e.g., data pipelines, integrations, workflows, dashboards) rather than relying on manual or tool-driven processes. Python or GoLang strongly preferred. * Practical experience working across application, cloud, and container security in AWS and/or Azure, including real-world vulnerability assessment in complex or multi-cloud environments. * Solid understanding of security controls and assurance goals, with the ability to translate standards such as NIST, CIS, and FedRAMP into low-friction, scalable engineering implementations. * Ability to reason clearly about exploitability, exposure, impact, and compensating controls, and to apply that reasoning to prioritize work that meaningfully reduces risk. * Experience partnering closely with product and engineering teams throughout the software lifecycle, from design and build through deployment and operation. * Strong communication skills, with the ability to explain security risk, tradeoffs, and remediation options to both technical and non-technical stakeholders. * Demonstrated ability to operate effectively in fast-paced environments, delivering impact quickly while navigating ambiguity and limited dependencies. * Broad understanding of how security functions (product security, platform security, GRC, operations) work together, and how vulnerability management fits into the larger system. * Familiarity with commercial cloud security platforms (e.g., Wiz) is a plus, but the ability to reason beyond tool outputs and build custom solutions is essential. What Helps You Stand Out * Demonstrated technical thought leadership in vulnerability management, with a track record of shaping how risk is modeled, prioritized, and reduced in modern engineering environments. * Prior hands-on experience architecting and building automated vulnerability management or security data platforms, not just operating commercial tools. * Strong systems-level thinking, including experience designing secure, scalable solutions across complex application and cloud ecosystems. * Experience applying security and compliance requirements in highly regulated environments (e.g., healthcare, FedRAMP High/Moderate), including representing technical programs to auditors or government stakeholders. * Experience coding and prototyping with modern developer tooling, including AI-assisted development workflows such as Claude Code, to accelerate delivery and reduce operational toil. We are committed to building a diverse team of Datavanters who are all responsible for stewarding a high-performance culture in which all Datavanters belong and thrive. We are proud to be an Equal Employment Opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, or other legally protected status. At Datavant our total rewards strategy powers a high-growth, high-performance, health technology company that rewards our employees for transforming health care through creating industry-defining data logistics products and services. The range posted is for a given job title, which can include multiple levels. Individual rates for the same job title may differ based on their level, responsibilities, skills, and experience for a specific job. $184,000-$230,000 USD To ensure the safety of patients and staff, many of our clients require post-offer health screenings and proof and/or completion of various vaccinations such as the flu shot, Tdap, COVID-19, etc. Any requests to be exempted from these requirements will be reviewed by Datavant Human Resources and determined on a case-by-case basis. Depending on the state in which you will be working, exemptions may be available on the basis of disability, medical contraindications to the vaccine or any of its components, pregnancy or pregnancy-related medical conditions, and/or religion. This job is not eligible for employment sponsorship. Datavant is committed to a work environment free from job discrimination. We are proud to be an Equal Employment Opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, or other legally protected status. To learn more about our commitment, please review our EEO Commitment Statement here () . Know Your Rights () , explore the resources available through the EEOC for more information regarding your legal rights and protections. In addition, Datavant does not and will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay. At the end of this application, you will find a set of voluntary demographic questions. If you choose to respond, your answers will be anonymous and will help us identify areas for improvement in our recruitment process. (We can only see aggregate responses, not individual ones. In fact, we aren't even able to see whether you've responded.) Responding is entirely optional and will not affect your application or hiring process in any way. Datavant is committed to working with and providing reasonable accommodations to individuals with physical and mental disabilities. If you need an accommodation while seeking employment, please request it here, () by selecting the 'Interview Accommodation Request' category. You will need your requisition ID when submitting your request, you can find instructions for locating it here () . Requests for reasonable accommodations will be reviewed on a case-by-case basis. For more information about how we collect and use your data, please review our Privacy Policy () .

Using the various applicable Life Safety & Fire codes as well as industry standards you will provide calculations; equipment size and quantities; equipment and construction specifications; network diagrams and various construction deliverables in both 2D and 3D platforms for a constructible design.