Trabajos safety technician en Carteret, New Jersey - Page 2Crear alertas

Job Title : Bomb Technician (EOD) Category / Component : Enlisted • Active Overview Explosive Ordnance Disposal Technicians locate, identify, render safe, and dispose of explosive threats on land, at sea, and underwater, using advanced robotics, diving, and explosives skills to protect forces and civilians and support fleet and joint operations worldwide. Key Responsibilities Detonate and demolish hazardous munitions, pyrotechnics, and outdated explosives; neutralize ordnance including sea mines, torpedoes, depth charges, and improvised explosive devices; remotely disable unsafe ordnance using robotic and diagnostic technology; conduct parachute and helicopter insertion operations; clear waterways of mines in support of ships and submarines; provide explosive ordnance support to law enforcement agencies and organizations such as the United States Secret Service and Department of State. What to Expect Global missions in every environment, from parachuting into remote terrain to arriving by small boat on foreign shores; majority of time spent in the field conducting high risk, time critical tasks with strict safety and risk management; regular integration with Special Operations, fleet units, and interagency partners; intense physical and mental demands with a culture that values precision, calm decision making, and discipline. Work Environment Operate worldwide on land, at sea, and underwater from EOD Mobile Units and detachments; insert via parachute, helicopter, and small boats; work from ships, shore commands, and forward locations; serve in small team based units that balance training, readiness, and operational tasking with limited administrative overhead compared to field work. Pathways, Training & Advancement Recruit Training followed by an EOD preparatory course at Great Lakes, Illinois, that builds swimming, conditioning, small boat skills, and risk management fundamentals; EOD Assessment and Selection Course that evaluates aquatic adaptability, running, swimming, academics, professionalism, and teamwork; Navy diver training at the Naval Diving and Salvage Training Center; Naval School Explosive Ordnance Disposal, which covers demolition, conventional ordnance, underwater mines, missiles, landmines, and chemical, biological, radiological, and nuclear threats; Basic Parachute Training and ongoing advanced training and qualifications throughout a career. Apply for the Navy Warrior Challenge contract for EOD during initial enlistment, then pass the EOD Physical Screening Test and diver medical screening; complete required assessments and receive recommendation and screening from an EOD officer or senior enlisted EOD technician; additional in service accession requirements may include minimum time on board, performance standards, and command endorsement. Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy. Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter. Additional qualifications for this job may include: Eyesight correctable within EOD diving standards, with no color blindness; qualifying ASVAB scores using combinations such as arithmetic reasoning and verbal expression or general science, mechanical comprehension, and electronics information; age typically 30 or younger at accession; United States citizenship and eligibility for a security clearance; excellent physical condition and swimming ability, with the capacity to perform detailed technical tasks under stress and in hazardous environments. Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities. Specific options depend on the Sailor's status, training, and current Navy policy. Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options. Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance. Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed. Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source. Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community. It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes. Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Job Description Staff Management Group is seeking a Beverage Packaging Technician for our client in Hillside, NJ. Please read the ENTIRE job description and ALL of the job requirements BEFORE applying for this position. Schedule: • 1st Shift: 6AM – 2:30PM, • 2nd Shift: 2:30PM – 10:30PM, • 3rd Shift: 10PM – 6:30AM, • Plus Overtime, • 6-day rotating schedule, with shifts assigned on any day of the week Pay Rate: • $25 / hour Job Summary: We’re hiring Packer Technicians for all shifts. In this hands-on role, you’ll operate and maintain KHS, SMI, and Douglas packers to keep production running smoothly. From troubleshooting equipment to ensuring product quality and safety, you’ll be at the heart of our packaging operations. Join us and take your mechanical skills to the next level in a fast-paced, team-driven environment. Job Responsibilities: • Operate and monitor packaging machines to ensure consistent production flow., • Execute equipment changeovers and startups with precision, safety, and efficiency., • Diagnose and resolve mechanical or operational issues to minimize downtime., • Perform preventive maintenance (PM) and carry out basic equipment repairs., • Inspect product quality regularly and report deviations immediately., • Maintain a clean, organized, and compliant work area in line with GMP and safety standards., • Collaborate with maintenance and production teams to enhance performance and reduce downtime. Job Requirements: • Prior experience with KHS, SMI, or Douglas packers strongly preferred., • Solid mechanical aptitude and troubleshooting skills required., • Proven ability to work independently while contributing effectively in a team environment., • Flexibility to work various shifts or hours as needed., • Commitment to following all company safety protocols and GMP policies., • Full availability and flexibility are required. Additional Information: Staff Management Group is an equal employment opportunity employer, and all qualified applicants will receive consideration for employment without unlawful discrimination based on race, color, creed, national origin, sex, age, disability, marital status, sexual orientation, or citizenship status. About Staff Management Group: Staff Management Group has over 30 years of experience placing staffing candidates in distribution, manufacturing, production, assembly, and clerical positions. Staff Management Group is one of New Jersey’s leading staffing and recruiting agencies specializing in light industrial and clerical staffing. Come join the team! #IND1

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Competitive salary, • Dental insurance, • Health insurance, • Paid time off, • Vision insurance Job Title: Traffic Operator- Over Nights Salary: $30/hr-$35/hr Location: Northern New Jersey / New York City Company Overview: Drive Integration, LLC (DI) is a certified Disadvantaged Business Enterprise (DBE) and Women-Owned Small Business (WOSB) specializing in infrastructure design, network engineering, hardware/software integration, installation, and equipment vending services. We support agencies and businesses with innovative technology solutions and are proud to serve major clients including NJDOT, SEPTA, PennDOT, and others across the Mid-Atlantic region. Position Description: The technician will play a key role in monitoring closed-circuit TVs, radio communications, police and fire scanners, incident detector devices, and assess roadway conditions for traffic, weather, and overall operations. Provides traveler information in the event of an accident by activation of highway advisory radio devices and dynamic/variable message boards. Reports and notifies maintenance personnel of highway incidents or weather conditions. Notifies State Police of vehicles that must be removed that may pose a safety hazard. Performs other related duties as assigned. Responsibilities include: • Maintaining and troubleshooting network devices, camera systems, access control, and vehicle tag readers., • Performing firmware and configuration updates on network systems., • Incident coordination in ITSM tool, • Collaborating with support teams to ensure systems are fully functional and aligned with customer needs., • Remote technical support for systems users, • Explaining issues and solutions clearly to clients., • Building and maintaining customer relationships., • Performing additional duties as assigned.Requirements:, • Valid drivers license and clean driving record., • Relevant experience in traffic or road construction, or similar fields., • Availability for flexible shifts, including weekends and on-call rotation., • Physical capability to perform tasks that include bending, lifting up to 50 lbs., and working in confined spaces., • Proficiency in MS Word, Outlook, Excel, and Teams., • Knowledge of LAN/WAN fundamentals and troubleshooting experience with Windows and MS Office., • Strong English communication skills, with additional languages (Spanish, French, or German) as a plus. Drive Integration, LLC is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Job Title : Bomb Technician (EOD) Category / Component : Enlisted • Active Overview Explosive Ordnance Disposal Technicians locate, identify, render safe, and dispose of explosive threats on land, at sea, and underwater, using advanced robotics, diving, and explosives skills to protect forces and civilians and support fleet and joint operations worldwide. Key Responsibilities Detonate and demolish hazardous munitions, pyrotechnics, and outdated explosives; neutralize ordnance including sea mines, torpedoes, depth charges, and improvised explosive devices; remotely disable unsafe ordnance using robotic and diagnostic technology; conduct parachute and helicopter insertion operations; clear waterways of mines in support of ships and submarines; provide explosive ordnance support to law enforcement agencies and organizations such as the United States Secret Service and Department of State. What to Expect Global missions in every environment, from parachuting into remote terrain to arriving by small boat on foreign shores; majority of time spent in the field conducting high risk, time critical tasks with strict safety and risk management; regular integration with Special Operations, fleet units, and interagency partners; intense physical and mental demands with a culture that values precision, calm decision making, and discipline. Work Environment Operate worldwide on land, at sea, and underwater from EOD Mobile Units and detachments; insert via parachute, helicopter, and small boats; work from ships, shore commands, and forward locations; serve in small team based units that balance training, readiness, and operational tasking with limited administrative overhead compared to field work. Pathways, Training & Advancement Recruit Training followed by an EOD preparatory course at Great Lakes, Illinois, that builds swimming, conditioning, small boat skills, and risk management fundamentals; EOD Assessment and Selection Course that evaluates aquatic adaptability, running, swimming, academics, professionalism, and teamwork; Navy diver training at the Naval Diving and Salvage Training Center; Naval School Explosive Ordnance Disposal, which covers demolition, conventional ordnance, underwater mines, missiles, landmines, and chemical, biological, radiological, and nuclear threats; Basic Parachute Training and ongoing advanced training and qualifications throughout a career. Apply for the Navy Warrior Challenge contract for EOD during initial enlistment, then pass the EOD Physical Screening Test and diver medical screening; complete required assessments and receive recommendation and screening from an EOD officer or senior enlisted EOD technician; additional in service accession requirements may include minimum time on board, performance standards, and command endorsement. Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy. Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter. Additional qualifications for this job may include: Eyesight correctable within EOD diving standards, with no color blindness; qualifying ASVAB scores using combinations such as arithmetic reasoning and verbal expression or general science, mechanical comprehension, and electronics information; age typically 30 or younger at accession; United States citizenship and eligibility for a security clearance; excellent physical condition and swimming ability, with the capacity to perform detailed technical tasks under stress and in hazardous environments. Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities. Specific options depend on the Sailor's status, training, and current Navy policy. Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options. Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance. Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed. Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source. Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community. It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes. Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Job Title : Bomb Technician (EOD) Category / Component : Enlisted • Active Overview Explosive Ordnance Disposal Technicians locate, identify, render safe, and dispose of explosive threats on land, at sea, and underwater, using advanced robotics, diving, and explosives skills to protect forces and civilians and support fleet and joint operations worldwide. Key Responsibilities Detonate and demolish hazardous munitions, pyrotechnics, and outdated explosives; neutralize ordnance including sea mines, torpedoes, depth charges, and improvised explosive devices; remotely disable unsafe ordnance using robotic and diagnostic technology; conduct parachute and helicopter insertion operations; clear waterways of mines in support of ships and submarines; provide explosive ordnance support to law enforcement agencies and organizations such as the United States Secret Service and Department of State. What to Expect Global missions in every environment, from parachuting into remote terrain to arriving by small boat on foreign shores; majority of time spent in the field conducting high risk, time critical tasks with strict safety and risk management; regular integration with Special Operations, fleet units, and interagency partners; intense physical and mental demands with a culture that values precision, calm decision making, and discipline. Work Environment Operate worldwide on land, at sea, and underwater from EOD Mobile Units and detachments; insert via parachute, helicopter, and small boats; work from ships, shore commands, and forward locations; serve in small team based units that balance training, readiness, and operational tasking with limited administrative overhead compared to field work. Pathways, Training & Advancement Recruit Training followed by an EOD preparatory course at Great Lakes, Illinois, that builds swimming, conditioning, small boat skills, and risk management fundamentals; EOD Assessment and Selection Course that evaluates aquatic adaptability, running, swimming, academics, professionalism, and teamwork; Navy diver training at the Naval Diving and Salvage Training Center; Naval School Explosive Ordnance Disposal, which covers demolition, conventional ordnance, underwater mines, missiles, landmines, and chemical, biological, radiological, and nuclear threats; Basic Parachute Training and ongoing advanced training and qualifications throughout a career. Apply for the Navy Warrior Challenge contract for EOD during initial enlistment, then pass the EOD Physical Screening Test and diver medical screening; complete required assessments and receive recommendation and screening from an EOD officer or senior enlisted EOD technician; additional in service accession requirements may include minimum time on board, performance standards, and command endorsement. Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy. Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter. Additional qualifications for this job may include: Eyesight correctable within EOD diving standards, with no color blindness; qualifying ASVAB scores using combinations such as arithmetic reasoning and verbal expression or general science, mechanical comprehension, and electronics information; age typically 30 or younger at accession; United States citizenship and eligibility for a security clearance; excellent physical condition and swimming ability, with the capacity to perform detailed technical tasks under stress and in hazardous environments. Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities. Specific options depend on the Sailor's status, training, and current Navy policy. Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options. Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance. Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed. Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source. Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community. It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes. Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Job Description Now Hiring Full Time Paratransit Access Link Drivers - Cranford, NJ Now offering a $500 sign-on bonus!* As a Full Time Paratransit Access Link Driver, you will play a vital role in your community and the lives of our passengers. No experience is necessary to become a Paratransit Access Link Driver. We are here to help you succeed with expert training and guidance to help you become a safe and professional First Student Paratransit Access Link Driver. Paratransit Access Link Driver benefits: • $18.90 per hour after training completion; $18.90 per hour while training., • We Train! Comprehensive professional driver training is provided, including instruction and qualifications on 15-passenger buses, resulting in increased experience and proficiency., • Medical, Dental, Vision, & Life insurance or coverage options., • 401(k) Retirement Plan., • Career Advancement Opportunities: Advance into operational, maintenance, management, and leadership roles in over 540 locations across the U.S. & Canada!, • Employee Assistance Program (EAP): Counseling and support services for personal and work-related issues., • Community Impact: Be a trusted figure for individuals and families., • Employee Discount Program: Discounts on various products and services., • Guaranteed Minimum Hours: Get paid for 40 hours per week at minimum., • Safety bonus: $300., • Safely transport of community members and neighbors to and from appointments, errands and everything in between., • Supervise boarding and unloading at stops; assist citizens while entering the vehicle and with mobility aids., • Conduct pre-trip and post-trip inspections (brakes, lights, tires, emergency exits)., • Report mechanical issues promptly and keep the bus clean and sanitary., • Obey all traffic laws and company safety standards., • Communicate with passengers, staff, and dispatch about behavior or delays., • Demonstrate leadership and customer service skills. Paratransit Driver Jobs are Perfect For: • Retirees looking for supplemental income, • Parents seeking work, • Veterans transitioning into civilian roles, • Anyone seeking a second career or flexible job, • Individuals who enjoy working with people You might be a good fit as a Paratransit Driver if you: • Are at least 21 years old, • Have a valid driver's license for at least 3 years, • Are looking for a full-time schedule Great Paratransit Driver often bring skills such as: • Valid CDL License (Class A, B or C) with passenger endorsement, • History driving with ride share companies or taxi services, • Previous experience as social worker, classroom assistant, hospitality worker, customer service, retail associate, care assistant or direct care worker. Take the wheel and drive your career forward with First Student! Make an impact in your community while enjoying guaranteed hours, great pay, good benefits and unmatched support. *Conditions apply. See location for details. First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request .

Job Description Benefits/Perks • Competitive Compensation, • Great Work Environment, • Career Advancement OpportunitiesJob SummaryWe are looking for a full-time Mobile Medical Assistant / Technician to conduct cognitive testing and Ankle-Brachial Index (ABI) testing. In this role, you will travel to various sites, performing tests, documenting results, and ensuring patient comfort and safety. Responsibilities • Administer cognitive screenings and ABI tests in non-clinical settings, • Prepare, explain, and guide patients through tests, • Accurately document and report results via mobile EHR system, • Maintain equipment and follow infection control protocols, • Travel to assigned locations and manage patient scheduling Qualifications • CMA, RMA, or relevant certification preferred, • Experience with cognitive or vascular testing a plus (training available), • Strong communication skills and the ability to work independently, • Valid driver’s license and reliable transportation

Job Title : Bomb Technician (EOD) Category / Component : Enlisted • Active Overview Explosive Ordnance Disposal Technicians locate, identify, render safe, and dispose of explosive threats on land, at sea, and underwater, using advanced robotics, diving, and explosives skills to protect forces and civilians and support fleet and joint operations worldwide. Key Responsibilities Detonate and demolish hazardous munitions, pyrotechnics, and outdated explosives; neutralize ordnance including sea mines, torpedoes, depth charges, and improvised explosive devices; remotely disable unsafe ordnance using robotic and diagnostic technology; conduct parachute and helicopter insertion operations; clear waterways of mines in support of ships and submarines; provide explosive ordnance support to law enforcement agencies and organizations such as the United States Secret Service and Department of State. What to Expect Global missions in every environment, from parachuting into remote terrain to arriving by small boat on foreign shores; majority of time spent in the field conducting high risk, time critical tasks with strict safety and risk management; regular integration with Special Operations, fleet units, and interagency partners; intense physical and mental demands with a culture that values precision, calm decision making, and discipline. Work Environment Operate worldwide on land, at sea, and underwater from EOD Mobile Units and detachments; insert via parachute, helicopter, and small boats; work from ships, shore commands, and forward locations; serve in small team based units that balance training, readiness, and operational tasking with limited administrative overhead compared to field work. Pathways, Training & Advancement Recruit Training followed by an EOD preparatory course at Great Lakes, Illinois, that builds swimming, conditioning, small boat skills, and risk management fundamentals; EOD Assessment and Selection Course that evaluates aquatic adaptability, running, swimming, academics, professionalism, and teamwork; Navy diver training at the Naval Diving and Salvage Training Center; Naval School Explosive Ordnance Disposal, which covers demolition, conventional ordnance, underwater mines, missiles, landmines, and chemical, biological, radiological, and nuclear threats; Basic Parachute Training and ongoing advanced training and qualifications throughout a career. Apply for the Navy Warrior Challenge contract for EOD during initial enlistment, then pass the EOD Physical Screening Test and diver medical screening; complete required assessments and receive recommendation and screening from an EOD officer or senior enlisted EOD technician; additional in service accession requirements may include minimum time on board, performance standards, and command endorsement. Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy. Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter. Additional qualifications for this job may include: Eyesight correctable within EOD diving standards, with no color blindness; qualifying ASVAB scores using combinations such as arithmetic reasoning and verbal expression or general science, mechanical comprehension, and electronics information; age typically 30 or younger at accession; United States citizenship and eligibility for a security clearance; excellent physical condition and swimming ability, with the capacity to perform detailed technical tasks under stress and in hazardous environments. Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities. Specific options depend on the Sailor's status, training, and current Navy policy. Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options. Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance. Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed. Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source. Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community. It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes. Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Job Title : Bomb Technician (EOD) Category / Component : Enlisted • Active Overview Explosive Ordnance Disposal Technicians locate, identify, render safe, and dispose of explosive threats on land, at sea, and underwater, using advanced robotics, diving, and explosives skills to protect forces and civilians and support fleet and joint operations worldwide. Key Responsibilities Detonate and demolish hazardous munitions, pyrotechnics, and outdated explosives; neutralize ordnance including sea mines, torpedoes, depth charges, and improvised explosive devices; remotely disable unsafe ordnance using robotic and diagnostic technology; conduct parachute and helicopter insertion operations; clear waterways of mines in support of ships and submarines; provide explosive ordnance support to law enforcement agencies and organizations such as the United States Secret Service and Department of State. What to Expect Global missions in every environment, from parachuting into remote terrain to arriving by small boat on foreign shores; majority of time spent in the field conducting high risk, time critical tasks with strict safety and risk management; regular integration with Special Operations, fleet units, and interagency partners; intense physical and mental demands with a culture that values precision, calm decision making, and discipline. Work Environment Operate worldwide on land, at sea, and underwater from EOD Mobile Units and detachments; insert via parachute, helicopter, and small boats; work from ships, shore commands, and forward locations; serve in small team based units that balance training, readiness, and operational tasking with limited administrative overhead compared to field work. Pathways, Training & Advancement Recruit Training followed by an EOD preparatory course at Great Lakes, Illinois, that builds swimming, conditioning, small boat skills, and risk management fundamentals; EOD Assessment and Selection Course that evaluates aquatic adaptability, running, swimming, academics, professionalism, and teamwork; Navy diver training at the Naval Diving and Salvage Training Center; Naval School Explosive Ordnance Disposal, which covers demolition, conventional ordnance, underwater mines, missiles, landmines, and chemical, biological, radiological, and nuclear threats; Basic Parachute Training and ongoing advanced training and qualifications throughout a career. Apply for the Navy Warrior Challenge contract for EOD during initial enlistment, then pass the EOD Physical Screening Test and diver medical screening; complete required assessments and receive recommendation and screening from an EOD officer or senior enlisted EOD technician; additional in service accession requirements may include minimum time on board, performance standards, and command endorsement. Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy. Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter. Additional qualifications for this job may include: Eyesight correctable within EOD diving standards, with no color blindness; qualifying ASVAB scores using combinations such as arithmetic reasoning and verbal expression or general science, mechanical comprehension, and electronics information; age typically 30 or younger at accession; United States citizenship and eligibility for a security clearance; excellent physical condition and swimming ability, with the capacity to perform detailed technical tasks under stress and in hazardous environments. Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities. Specific options depend on the Sailor's status, training, and current Navy policy. Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options. Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance. Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed. Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source. Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community. It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes. Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Job Title : Bomb Technician (EOD) Category / Component : Enlisted • Active Overview Explosive Ordnance Disposal Technicians locate, identify, render safe, and dispose of explosive threats on land, at sea, and underwater, using advanced robotics, diving, and explosives skills to protect forces and civilians and support fleet and joint operations worldwide. Key Responsibilities Detonate and demolish hazardous munitions, pyrotechnics, and outdated explosives; neutralize ordnance including sea mines, torpedoes, depth charges, and improvised explosive devices; remotely disable unsafe ordnance using robotic and diagnostic technology; conduct parachute and helicopter insertion operations; clear waterways of mines in support of ships and submarines; provide explosive ordnance support to law enforcement agencies and organizations such as the United States Secret Service and Department of State. What to Expect Global missions in every environment, from parachuting into remote terrain to arriving by small boat on foreign shores; majority of time spent in the field conducting high risk, time critical tasks with strict safety and risk management; regular integration with Special Operations, fleet units, and interagency partners; intense physical and mental demands with a culture that values precision, calm decision making, and discipline. Work Environment Operate worldwide on land, at sea, and underwater from EOD Mobile Units and detachments; insert via parachute, helicopter, and small boats; work from ships, shore commands, and forward locations; serve in small team based units that balance training, readiness, and operational tasking with limited administrative overhead compared to field work. Pathways, Training & Advancement Recruit Training followed by an EOD preparatory course at Great Lakes, Illinois, that builds swimming, conditioning, small boat skills, and risk management fundamentals; EOD Assessment and Selection Course that evaluates aquatic adaptability, running, swimming, academics, professionalism, and teamwork; Navy diver training at the Naval Diving and Salvage Training Center; Naval School Explosive Ordnance Disposal, which covers demolition, conventional ordnance, underwater mines, missiles, landmines, and chemical, biological, radiological, and nuclear threats; Basic Parachute Training and ongoing advanced training and qualifications throughout a career. Apply for the Navy Warrior Challenge contract for EOD during initial enlistment, then pass the EOD Physical Screening Test and diver medical screening; complete required assessments and receive recommendation and screening from an EOD officer or senior enlisted EOD technician; additional in service accession requirements may include minimum time on board, performance standards, and command endorsement. Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy. Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter. Additional qualifications for this job may include: Eyesight correctable within EOD diving standards, with no color blindness; qualifying ASVAB scores using combinations such as arithmetic reasoning and verbal expression or general science, mechanical comprehension, and electronics information; age typically 30 or younger at accession; United States citizenship and eligibility for a security clearance; excellent physical condition and swimming ability, with the capacity to perform detailed technical tasks under stress and in hazardous environments. Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities. Specific options depend on the Sailor's status, training, and current Navy policy. Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options. Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance. Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed. Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source. Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community. It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes. Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Job Title : Bomb Technician (EOD) Category / Component : Enlisted • Active Overview Explosive Ordnance Disposal Technicians locate, identify, render safe, and dispose of explosive threats on land, at sea, and underwater, using advanced robotics, diving, and explosives skills to protect forces and civilians and support fleet and joint operations worldwide. Key Responsibilities Detonate and demolish hazardous munitions, pyrotechnics, and outdated explosives; neutralize ordnance including sea mines, torpedoes, depth charges, and improvised explosive devices; remotely disable unsafe ordnance using robotic and diagnostic technology; conduct parachute and helicopter insertion operations; clear waterways of mines in support of ships and submarines; provide explosive ordnance support to law enforcement agencies and organizations such as the United States Secret Service and Department of State. What to Expect Global missions in every environment, from parachuting into remote terrain to arriving by small boat on foreign shores; majority of time spent in the field conducting high risk, time critical tasks with strict safety and risk management; regular integration with Special Operations, fleet units, and interagency partners; intense physical and mental demands with a culture that values precision, calm decision making, and discipline. Work Environment Operate worldwide on land, at sea, and underwater from EOD Mobile Units and detachments; insert via parachute, helicopter, and small boats; work from ships, shore commands, and forward locations; serve in small team based units that balance training, readiness, and operational tasking with limited administrative overhead compared to field work. Pathways, Training & Advancement Recruit Training followed by an EOD preparatory course at Great Lakes, Illinois, that builds swimming, conditioning, small boat skills, and risk management fundamentals; EOD Assessment and Selection Course that evaluates aquatic adaptability, running, swimming, academics, professionalism, and teamwork; Navy diver training at the Naval Diving and Salvage Training Center; Naval School Explosive Ordnance Disposal, which covers demolition, conventional ordnance, underwater mines, missiles, landmines, and chemical, biological, radiological, and nuclear threats; Basic Parachute Training and ongoing advanced training and qualifications throughout a career. Apply for the Navy Warrior Challenge contract for EOD during initial enlistment, then pass the EOD Physical Screening Test and diver medical screening; complete required assessments and receive recommendation and screening from an EOD officer or senior enlisted EOD technician; additional in service accession requirements may include minimum time on board, performance standards, and command endorsement. Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy. Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter. Additional qualifications for this job may include: Eyesight correctable within EOD diving standards, with no color blindness; qualifying ASVAB scores using combinations such as arithmetic reasoning and verbal expression or general science, mechanical comprehension, and electronics information; age typically 30 or younger at accession; United States citizenship and eligibility for a security clearance; excellent physical condition and swimming ability, with the capacity to perform detailed technical tasks under stress and in hazardous environments. Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities. Specific options depend on the Sailor's status, training, and current Navy policy. Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options. Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance. Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed. Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source. Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community. It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes. Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Job Title : Bomb Technician (EOD) Category / Component : Enlisted • Active Overview Explosive Ordnance Disposal Technicians locate, identify, render safe, and dispose of explosive threats on land, at sea, and underwater, using advanced robotics, diving, and explosives skills to protect forces and civilians and support fleet and joint operations worldwide. Key Responsibilities Detonate and demolish hazardous munitions, pyrotechnics, and outdated explosives; neutralize ordnance including sea mines, torpedoes, depth charges, and improvised explosive devices; remotely disable unsafe ordnance using robotic and diagnostic technology; conduct parachute and helicopter insertion operations; clear waterways of mines in support of ships and submarines; provide explosive ordnance support to law enforcement agencies and organizations such as the United States Secret Service and Department of State. What to Expect Global missions in every environment, from parachuting into remote terrain to arriving by small boat on foreign shores; majority of time spent in the field conducting high risk, time critical tasks with strict safety and risk management; regular integration with Special Operations, fleet units, and interagency partners; intense physical and mental demands with a culture that values precision, calm decision making, and discipline. Work Environment Operate worldwide on land, at sea, and underwater from EOD Mobile Units and detachments; insert via parachute, helicopter, and small boats; work from ships, shore commands, and forward locations; serve in small team based units that balance training, readiness, and operational tasking with limited administrative overhead compared to field work. Pathways, Training & Advancement Recruit Training followed by an EOD preparatory course at Great Lakes, Illinois, that builds swimming, conditioning, small boat skills, and risk management fundamentals; EOD Assessment and Selection Course that evaluates aquatic adaptability, running, swimming, academics, professionalism, and teamwork; Navy diver training at the Naval Diving and Salvage Training Center; Naval School Explosive Ordnance Disposal, which covers demolition, conventional ordnance, underwater mines, missiles, landmines, and chemical, biological, radiological, and nuclear threats; Basic Parachute Training and ongoing advanced training and qualifications throughout a career. Apply for the Navy Warrior Challenge contract for EOD during initial enlistment, then pass the EOD Physical Screening Test and diver medical screening; complete required assessments and receive recommendation and screening from an EOD officer or senior enlisted EOD technician; additional in service accession requirements may include minimum time on board, performance standards, and command endorsement. Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy. Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter. Additional qualifications for this job may include: Eyesight correctable within EOD diving standards, with no color blindness; qualifying ASVAB scores using combinations such as arithmetic reasoning and verbal expression or general science, mechanical comprehension, and electronics information; age typically 30 or younger at accession; United States citizenship and eligibility for a security clearance; excellent physical condition and swimming ability, with the capacity to perform detailed technical tasks under stress and in hazardous environments. Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities. Specific options depend on the Sailor's status, training, and current Navy policy. Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options. Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance. Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed. Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source. Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community. It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes. Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Job Title : Bomb Technician (EOD) Category / Component : Enlisted • Active Overview Explosive Ordnance Disposal Technicians locate, identify, render safe, and dispose of explosive threats on land, at sea, and underwater, using advanced robotics, diving, and explosives skills to protect forces and civilians and support fleet and joint operations worldwide. Key Responsibilities Detonate and demolish hazardous munitions, pyrotechnics, and outdated explosives; neutralize ordnance including sea mines, torpedoes, depth charges, and improvised explosive devices; remotely disable unsafe ordnance using robotic and diagnostic technology; conduct parachute and helicopter insertion operations; clear waterways of mines in support of ships and submarines; provide explosive ordnance support to law enforcement agencies and organizations such as the United States Secret Service and Department of State. What to Expect Global missions in every environment, from parachuting into remote terrain to arriving by small boat on foreign shores; majority of time spent in the field conducting high risk, time critical tasks with strict safety and risk management; regular integration with Special Operations, fleet units, and interagency partners; intense physical and mental demands with a culture that values precision, calm decision making, and discipline. Work Environment Operate worldwide on land, at sea, and underwater from EOD Mobile Units and detachments; insert via parachute, helicopter, and small boats; work from ships, shore commands, and forward locations; serve in small team based units that balance training, readiness, and operational tasking with limited administrative overhead compared to field work. Pathways, Training & Advancement Recruit Training followed by an EOD preparatory course at Great Lakes, Illinois, that builds swimming, conditioning, small boat skills, and risk management fundamentals; EOD Assessment and Selection Course that evaluates aquatic adaptability, running, swimming, academics, professionalism, and teamwork; Navy diver training at the Naval Diving and Salvage Training Center; Naval School Explosive Ordnance Disposal, which covers demolition, conventional ordnance, underwater mines, missiles, landmines, and chemical, biological, radiological, and nuclear threats; Basic Parachute Training and ongoing advanced training and qualifications throughout a career. Apply for the Navy Warrior Challenge contract for EOD during initial enlistment, then pass the EOD Physical Screening Test and diver medical screening; complete required assessments and receive recommendation and screening from an EOD officer or senior enlisted EOD technician; additional in service accession requirements may include minimum time on board, performance standards, and command endorsement. Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy. Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter. Additional qualifications for this job may include: Eyesight correctable within EOD diving standards, with no color blindness; qualifying ASVAB scores using combinations such as arithmetic reasoning and verbal expression or general science, mechanical comprehension, and electronics information; age typically 30 or younger at accession; United States citizenship and eligibility for a security clearance; excellent physical condition and swimming ability, with the capacity to perform detailed technical tasks under stress and in hazardous environments. Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities. Specific options depend on the Sailor's status, training, and current Navy policy. Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options. Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance. Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed. Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source. Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community. It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes. Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Job Title : Bomb Technician (EOD) Category / Component : Enlisted • Active Overview Explosive Ordnance Disposal Technicians locate, identify, render safe, and dispose of explosive threats on land, at sea, and underwater, using advanced robotics, diving, and explosives skills to protect forces and civilians and support fleet and joint operations worldwide. Key Responsibilities Detonate and demolish hazardous munitions, pyrotechnics, and outdated explosives; neutralize ordnance including sea mines, torpedoes, depth charges, and improvised explosive devices; remotely disable unsafe ordnance using robotic and diagnostic technology; conduct parachute and helicopter insertion operations; clear waterways of mines in support of ships and submarines; provide explosive ordnance support to law enforcement agencies and organizations such as the United States Secret Service and Department of State. What to Expect Global missions in every environment, from parachuting into remote terrain to arriving by small boat on foreign shores; majority of time spent in the field conducting high risk, time critical tasks with strict safety and risk management; regular integration with Special Operations, fleet units, and interagency partners; intense physical and mental demands with a culture that values precision, calm decision making, and discipline. Work Environment Operate worldwide on land, at sea, and underwater from EOD Mobile Units and detachments; insert via parachute, helicopter, and small boats; work from ships, shore commands, and forward locations; serve in small team based units that balance training, readiness, and operational tasking with limited administrative overhead compared to field work. Pathways, Training & Advancement Recruit Training followed by an EOD preparatory course at Great Lakes, Illinois, that builds swimming, conditioning, small boat skills, and risk management fundamentals; EOD Assessment and Selection Course that evaluates aquatic adaptability, running, swimming, academics, professionalism, and teamwork; Navy diver training at the Naval Diving and Salvage Training Center; Naval School Explosive Ordnance Disposal, which covers demolition, conventional ordnance, underwater mines, missiles, landmines, and chemical, biological, radiological, and nuclear threats; Basic Parachute Training and ongoing advanced training and qualifications throughout a career. Apply for the Navy Warrior Challenge contract for EOD during initial enlistment, then pass the EOD Physical Screening Test and diver medical screening; complete required assessments and receive recommendation and screening from an EOD officer or senior enlisted EOD technician; additional in service accession requirements may include minimum time on board, performance standards, and command endorsement. Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy. Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter. Additional qualifications for this job may include: Eyesight correctable within EOD diving standards, with no color blindness; qualifying ASVAB scores using combinations such as arithmetic reasoning and verbal expression or general science, mechanical comprehension, and electronics information; age typically 30 or younger at accession; United States citizenship and eligibility for a security clearance; excellent physical condition and swimming ability, with the capacity to perform detailed technical tasks under stress and in hazardous environments. Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities. Specific options depend on the Sailor's status, training, and current Navy policy. Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options. Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance. Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed. Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source. Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community. It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes. Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Job Title : Bomb Technician (EOD) Category / Component : Enlisted • Active Overview Explosive Ordnance Disposal Technicians locate, identify, render safe, and dispose of explosive threats on land, at sea, and underwater, using advanced robotics, diving, and explosives skills to protect forces and civilians and support fleet and joint operations worldwide. Key Responsibilities Detonate and demolish hazardous munitions, pyrotechnics, and outdated explosives; neutralize ordnance including sea mines, torpedoes, depth charges, and improvised explosive devices; remotely disable unsafe ordnance using robotic and diagnostic technology; conduct parachute and helicopter insertion operations; clear waterways of mines in support of ships and submarines; provide explosive ordnance support to law enforcement agencies and organizations such as the United States Secret Service and Department of State. What to Expect Global missions in every environment, from parachuting into remote terrain to arriving by small boat on foreign shores; majority of time spent in the field conducting high risk, time critical tasks with strict safety and risk management; regular integration with Special Operations, fleet units, and interagency partners; intense physical and mental demands with a culture that values precision, calm decision making, and discipline. Work Environment Operate worldwide on land, at sea, and underwater from EOD Mobile Units and detachments; insert via parachute, helicopter, and small boats; work from ships, shore commands, and forward locations; serve in small team based units that balance training, readiness, and operational tasking with limited administrative overhead compared to field work. Pathways, Training & Advancement Recruit Training followed by an EOD preparatory course at Great Lakes, Illinois, that builds swimming, conditioning, small boat skills, and risk management fundamentals; EOD Assessment and Selection Course that evaluates aquatic adaptability, running, swimming, academics, professionalism, and teamwork; Navy diver training at the Naval Diving and Salvage Training Center; Naval School Explosive Ordnance Disposal, which covers demolition, conventional ordnance, underwater mines, missiles, landmines, and chemical, biological, radiological, and nuclear threats; Basic Parachute Training and ongoing advanced training and qualifications throughout a career. Apply for the Navy Warrior Challenge contract for EOD during initial enlistment, then pass the EOD Physical Screening Test and diver medical screening; complete required assessments and receive recommendation and screening from an EOD officer or senior enlisted EOD technician; additional in service accession requirements may include minimum time on board, performance standards, and command endorsement. Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy. Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter. Additional qualifications for this job may include: Eyesight correctable within EOD diving standards, with no color blindness; qualifying ASVAB scores using combinations such as arithmetic reasoning and verbal expression or general science, mechanical comprehension, and electronics information; age typically 30 or younger at accession; United States citizenship and eligibility for a security clearance; excellent physical condition and swimming ability, with the capacity to perform detailed technical tasks under stress and in hazardous environments. Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities. Specific options depend on the Sailor's status, training, and current Navy policy. Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options. Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance. Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed. Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source. Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community. It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes. Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

As a Driver at Lewis Environmental, you will be a critical part of our team, responsible for driving commercial vehicles to support a variety of Environmental Services projects. Your role will include transporting hazardous and non-hazardous materials, responding to environmental emergencies, and ensuring the safe and efficient operation of all vehicles. This position offers the opportunity to make a significant impact by ensuring safety and compliance in our day-to-day operations and emergency response efforts. Key Responsibilities Vehicle Operation: Safely drive commercial vehicles to support a wide range of environmental services projects. Compliance: Maintain all DOT and OSHA certifications required for operating a CDL truck, including transporting hazardous and non-hazardous materials. Safety: Follow all company safety rules and OSHA regulations. Attend required safety training programs to ensure a safe working environment. Emergency Response: Participate as a member of the On-Call Emergency Response Team, responding to environmental spills and other emergencies. Vehicle Maintenance: Perform pre- and post-trip vehicle inspections and ensure all equipment is maintained in excellent working condition. Regulatory Adherence: Ensure compliance with all regulations regarding the transportation of hazardous and non-hazardous waste. Team Collaboration: Perform Service Technician duties as part of our team-based operations philosophy, assisting in the completion of various environmental tasks. Qualifications Experience: Minimum 2 years of experience as a CDL driver, preferably with hazardous material handling experience. Licensing: Valid CDL license with Hazmat and Tanker endorsements required. Motor Vehicle Record: Clean Motor Vehicle Record (MVR) and successful completion of a criminal background check, including an acceptable FMCSA record. Safety & Compliance: Strong commitment to safety, quality, and compliance with all industry regulations. Training: 40 hours of OSHA and related safety training is a plus, though training will be provided. Availability: Willingness to work flexible hours, including being on call during weekends and after hours. Physical Requirements Vehicle Operation: Ability to sit for extended periods while operating a motor vehicle. Manual Labor: Ability to lift up to 60 lbs. and perform manual labor tasks as part of daily duties. Weather Conditions: Ability to work in severe weather conditions, both hot and cold. Confined Spaces & Safety Gear: Ability to work in confined spaces and wear a respirator as needed. Clean shaven requirements for respirator use. Physical Effort: Ability to stand and exert physical effort performing manual labor 50-70% of the time. Noise Exposure: Able to tolerate exposure to moderate noise levels. Why Join Us? At Lewis Environmental, we are dedicated to fostering a supportive and inclusive environment where safety, teamwork, and professional development are prioritized. We offer opportunities for growth and provide comprehensive training and support to ensure that our team members succeed and thrive. Equal Opportunity Employer Lewis Environmental is an Equal Opportunity Employer and is committed to building a diverse workforce. We do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. All qualified applicants will receive consideration for employment without regard to any protected characteristic.

Marshalls - 2875 Richmond Avenue, Richmond Shopping Center, Staten Island, NY 10314, United States of America [Cleaning Technician / Custodian] As a Cleaning Associate at Marshalls, you'll: Supervise maintenance staff; Manage a safe workplace by advocating safety training and accident preparedness;

Job Description About the client: They provide high-quality products and exceptional service as a leading wholesaler, refurbisher, 3PL provider, and distributor. The company refurbishes and distributes electronics, such as laptops and home audio gear, and offers warehousing, packaging, shipping, and related logistics services. About the Role: We are seeking a detail-oriented Refurbishment Technician to perform rapid functional testing on refurbished electronics in a high-throughput production environment. This role focuses on verifying basic device functionality, documenting results, and routing units appropriately. No advanced diagnostics required. Schedule: Monday–Friday, 8:30 AM–5:00 PM (OT as needed) Key Responsibilities: • Perform basic functional testing (power, charging, ports, display, audio, Wi-Fi/Bluetooth), • Run simple software checks when provided, • Record pass/fail results accurately, • Sort devices (Pass / Repair / Parts Only / Scrap), • Maintain production pace and quality standards, • Experience handling or testing electronics in warehouse or production settings, • Ability to follow written steps consistently and work efficiently, • Basic computer/data entry skills, • Strong attention to detail, • Able to stand for extended periods and lift up to 30 lbs

Job Description Electrical and Instrumentation Technician installs, services, troubleshoots and performs preventive and predictive maintenance functions on plant equipment. This equipment includes but is not limited to; plant lighting equipment, electrical circuits, motors, starters, motor control centers, programmable controllers, control panels, transformers, switches, transmitters, automatic valves, regulators, guide systems, distributed control systems, PLC's, overhead cranes etc. May perform additional duties as assigned. Minimum Requirements: Must have a high school diploma or general equivalency diploma (GED). Must have basic math skills. Must be mechanically inclined and a minimum of 2 years of electrical / instrumentation training and/or experience. Essential Job Functions: • Able to troubleshoot, repair and wire 120 volt and (3) phase 460 volt circuits and electrical equipment., • Basic understanding of Electricity and Instrumentation., • Able to troubleshoot, repair and install distribution systems up to 460 volts., • Able to troubleshoot, repair and install controls: coils contactors, relays, brakes etc. LANGUAGE SKILLS: Able to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. MATHEMATICAL SKILLS: Able to read a tape measure with speed and accuracy. Able to calculate figures and amounts such as percentages, measurement, volume and rate. Able to apply concepts of high school math. REASONING ABILITY: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or graphic form. Ability to deal with problems involving several concrete variables in standardized situations. Leading root cause analysis and problem solving teams. Analytical and field troubleshooting skills. TECHNICAL SKILLS: Working knowledge of mechanical and electrical machinery, including conveyer systems, breakers, boilers, hydraulic and pneumatic systems, etc. Knowledge of computer systems and the ability to learn new complex applications. CERTIFICATES, LICENSES, REGISTRATIONS: May be required to maintain a current Lift Truck Operator License and/or other appropriate certification to work in certain areas or on certain equipment. PHYSICAL DEMANDS: While performing the duties of this job, the employee is regularly required to stand, walk, and talk or hear. The employee frequently is required to use hands to finger, handle, or feel; reach with hands and arms; and stoop, kneel, crouch, or crawl. The employee is occasionally required to sit. The employee must regularly lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT: While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to wet and/or humid conditions. The employee is occasionally exposed to high, precarious places; fumes or airborne particles; and vibration. The noise level in the work environment is usually loud. • Able to install transformers up to 460 volt, • Able to interpret wiring drawings / diagrams., • Able to wire motors single phase, 3 phase 460 volt and 3 phase 4160 volt as per NEC / OSHA codes and Pratt standard operating procedures., • Able to use and interpret a Megohm meter., • Able to use and interpret a multimeter; volts, amps and ohms, • Able to troubleshoot and install switches; proximity, speed, limit, pressure etc., • Able to run and bend conduit and pull wire., • Able to troubleshoot control valves and transmitters., • General knowledge of electrical and pneumatic systems in mill., • Understanding of pneumatic controls including controllers, actuators, positioners and valves.

Job DescriptionBenefits: • 401(k) matching, • Competitive salary, • Flexible schedule, • Health insurance, • Paid time off, • Training & development Pharmacy Name: Payless Pharmacy Location: 222 N Wood Ave, Linden, NJ - 07036 Position Type: Full-Time Immediate Joining Preferred Job Description: Payless Pharmacy in Linden is looking for a highly motivated and detail-oriented Pharmacy Technician to join our dynamic team. The successful candidate will support the pharmacist in preparing and dispensing medications, delivering exceptional customer service, and ensuring full compliance with all relevant laws and regulations. If you are passionate about healthcare and committed to providing excellent patient care, we encourage you to apply. Key Responsibilities: • Assist in accurately preparing and dispensing prescription medications under a licensed pharmacist's supervision., • Deliver outstanding customer service by assisting patients with inquiries, processing transactions, and professionally addressing concerns., • Maintain accurate inventory levels, order supplies, and manage stock to ensure medication availability., • Ensure all pharmacy operations adhere to federal, state, and local regulations., • Maintain precise patient records and pharmacy documentation., • Efficiently handle insurance claims processing and resolve reimbursement issues., • Collaborate with pharmacists and other healthcare professionals to provide optimal patient care., • Follow safety protocols and guidelines to maintain a safe working environment. Job Requirements: • High school diploma or equivalent; completion of a pharmacy technician training program is preferred., • Certified Pharmacy Technician (CPhT) preferred., • Minimum of 3+ years of experience in a pharmacy setting is preferred. Skills: • Exceptional attention to detail and organizational skills., • Excellent communication and interpersonal abilities., • Proficiency with pharmacy management software., • Ability to thrive in a fast-paced environment and manage multiple tasks efficiently., • Strong knowledge of pharmacy laws and regulations. We look forward to reviewing your application. Linden Pharmacy is an equal opportunity employer.

Job Description Traffic Control Solutions Corp has immediate openings for Traffic Control Technician/Highway Safety Flagger positions in New Jersey for our Bayonne, Barnegat, and Williamstown locations. As the Traffic Control Coordinator/Highway Safety Flagman, you will be responsible for overseeing all traffic management operations for construction and consultant bridge, overhead sign structure, and geotechnical sites, and other projects requiring traffic control. You will ensure the implementation of safety measures, compliance with traffic laws, and the smooth flow of traffic to minimize disruptions. ESSENTIAL FUNCTIONS: • Operate company trucks to transport materials and equipment to job sites., • Drive TMA (Truck Mounted Attenuator) vehicle to and from projects and on work sites to protect workers and work zones., • Place temporary construction signs in work areas., • Position arrow boards or variable message boards in work areas. Set up traffic cones and other traffic safety devices in work areas., • Monitor the work zone throughout the shift to ensure items remain in their proper locations., • Collect and load traffic control items at the beginning and end of shifts., • Install, remove, and reset delineators, signs, posts, and supports., • Follow all safety rules and regulations to ensure a safe work environment., • Adhere to all Company Policies and Procedures., • Perform other work-related duties as assigned., • Valid Driver’s License, with no more than 2 points on license, and have your own vehicle to arrive at our hub location closest to you for work. Please be located within 30 minutes of our hub location to ensure meeting our hiring requirements., • Must be able to pass a background check, including a motor vehicle records check, before being hired., • Must successfully pass a drug test and meet federal DOT requirements. This includes random tests throughout employment. Marijuana is an illegal drug when driving any DOT vehicle., • Wear proper safety equipment (work boots with safety toes, a hard hat, safety glasses, and a safety vest)., • Basic reading and writing ability to comply with road signs, complete paperwork, and knowledge of federal and state motor carrier safety regulations., • Must be able to read and study state DOT plans and ensure traffic control plans are implemented and maintained., • Good knowledge of state and local roadways and experience operating delivery vehicles of varying sizes. • Typical job site locations are within 2 hours of the dispatch hub. Starting pay is $ 17.00 - $20.00 per hour, with a mandatory 30-minute unpaid lunch break. Employees must bring lunch to work. The successful completion of the online ATSSA Flagging course must be completed within the first 30 days of employment., • After 6 months of employment and having proven the knowledge and leadership to be a TCC foreman, a TCC course will be made available, which rewards an immediate $5.00 per hour raise., • A times, our customers have projects that require us to pay our Traffic Control Technicians' prevailing wage rates. Those rates vary from $80.00 - $100.00 per hour. The jobs are offered to employees who demonstrate the work ethic, availability, and knowledge of his/her position., • Some of our customers have projects that are further than two hours away from our hub locations. These locations will be classified as travel overnight jobs. All employees are required to do at least one week's worth of these travel jobs per month, if these jobs are available. Typically, these jobs run from Monday through Thursday. For our employees to be home by Thursday evening. These jobs pay an additional $5.00 per hour, including travel hourly pay to a hotel where the job site is located at the company's expense., • Typical scheduled shifts are 70%-day, 25% night, and 5% weekends. All applicants must have availability to be scheduled for any of these shifts. Our schedule is sent out by 5 pm the previous day. Traffic Control Solutions offers a flexible shift-off policy requiring 2 weeks' notice for a shift unable to be ability for., • Traffic control solutions are required by the state of New Jersey to provide full-time, part-time, and temporary employees with up to 40 hours of earned sick leave per year to care for themselves or a loved one, including chosen family.

Job DescriptionCoreWeave is The Essential Cloud for AI™. Built for pioneers by pioneers, CoreWeave delivers a platform of technology, tools, and teams that enables innovators to build and scale AI with confidence. Trusted by leading AI labs, startups, and global enterprises, CoreWeave combines superior infrastructure performance with deep technical expertise to accelerate breakthroughs and turn compute into capability. Founded in 2017, CoreWeave became a publicly traded company (Nasdaq: CRWV) in March 2025. Learn more at . What You'll Do: The Global Data Center Operations team serves as the backbone of our infrastructure, ensuring the seamless performance of our global hyperscale environment. Operating in a high-stakes, 24/7 setting, this team is responsible for safeguarding the availability, stability, and reliability of mission-critical systems that power our most essential services. About the role: As a Command Center Technician, you will serve as the front-line mission control for our global data center fleet. In a 24/7 operations environment, you will be responsible for real-time monitoring, coordination, and incident response across critical electrical, mechanical, and environmental systems. Acting as the central point of visibility, you will identify anomalies, coordinate cross-functional response efforts, and drive rapid resolution to ensure maximum uptime, operational continuity, and safety across our infrastructure. • Provide continuous 24/7 monitoring of global data center infrastructure systems using BMS, EPMS, DCIM, and other monitoring platforms., • Monitor critical assets including UPS, generators, switchgear, chillers, and fire suppression systems., • Serve as the first responder for infrastructure alarms, triaging incidents and initiating response actions per SOPs, MOPs, and EOPs., • Escalate incidents promptly to on-site operations, engineering teams, and leadership based on defined escalation matrices., • Coordinate incident response activities across multiple teams to minimize risk to production environments., • Support root cause analysis (RCA) efforts by providing detailed timelines, logs, and incident documentation., • Act as a central communication hub, providing clear and accurate status updates during incidents and maintenance events., • Enforce adherence to change management processes and safety requirements within mission-critical environments., • Maintain detailed event logs and participate in structured shift handovers to ensure operational continuity., • 2+ years of experience working in mission-critical environments (data centers, utilities, or industrial operations)., • Foundational technical knowledge of data center electrical and mechanical infrastructure systems., • Proven experience following and executing SOPs, MOPs, and EOPs in high-availability environments., • Proficiency with monitoring tools, ticketing systems, and operational dashboards., • Experience in incident management, technical troubleshooting, and structured escalation., • Ability to work rotating shifts, including nights, weekends, and holidays, in a 24/7 operations environment., • Availability to work a flexible schedule within a 24/7 environment., • Excellent time management, organizational, and communication skills., • Must be able to prioritize tasks and react quickly to issues., • 4+ years of experience working in mission-critical environments, • Prior experience in a hyperscale or large-scale data center environment., • Hands-on technical background in electrical (UPS, switchgear) or mechanical (chillers, CRAC units) systems., • Familiarity with specific BMS, EPMS, and DCIM platforms., • You love to maintain high situational awareness and dive into the details of complex systems., • You're curious about identifying recurring trends or procedural gaps to drive continuous improvement. At CoreWeave, we work hard, have fun, and move fast! We're in an exciting stage of hyper-growth that you will not want to miss out on. We're not afraid of a little chaos, and we're constantly learning. Our team cares deeply about how we build our product and how we work together, which is represented through our core values: • Be Curious at Your Core, • Act Like an Owner, • Empower Employees, • Deliver Best-in-Class Client Experiences The base salary range for this role is $75,000 to $100,000. The starting salary will be determined by job-related knowledge, skills, experience, and the market location. We strive for both market alignment and internal equity when determining compensation. In addition to base salary, our total rewards package includes a discretionary bonus, equity awards, and a comprehensive benefits program (all based on eligibility). What We Offer The range we've posted represents the typical compensation range for this role. To determine actual compensation, we review the market rate for each candidate which can include a variety of factors. These include qualifications, experience, interview performance, and location. In addition to a competitive salary, we offer a variety of benefits to support your needs, including: • Medical, dental, and vision insurance - 100% paid for by CoreWeave, • Company-paid Life Insurance, • Voluntary supplemental life insurance, • Short and long-term disability insurance, • Flexible Spending Account, • Health Savings Account, • Tuition Reimbursement, • Ability to Participate in Employee Stock Purchase Program (ESPP), • Mental Wellness Benefits through Spring Health, • Family-Forming support provided by Carrot, • Paid Parental Leave, • Flexible, full-service childcare support with Kinside, • 401(k) with a generous employer match, • Flexible PTO, • Catered lunch each day in our office and data center locations, • A casual work environment While we prioritize a hybrid work environment, remote work may be considered for candidates located more than 30 miles from an office, based on role requirements for specialized skill sets. New hires will be invited to attend onboarding at one of our hubs within their first month. Teams also gather quarterly to support collaboration. California Consumer Privacy Act - California applicants only CoreWeave is an equal opportunity employer, committed to fostering an inclusive and supportive workplace. All qualified applicants and candidates will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment and consistent with the Americans with Disabilities Act (ADA), CoreWeave will ensure that qualified applicants and candidates with disabilities are provided reasonable accommodations for the hiring process, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed, please contact: . Export Control Compliance This position requires access to export controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must either be (A) a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (green card holder), (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, (B) eligible to access the export controlled information without a required export authorization, or (C) eligible and reasonably likely to obtain the required export authorization from the applicable U.S. government agency. CoreWeave may, for legitimate business reasons, decline to pursue any export licensing process.

Job Description We are currently seeking a skilled and dedicated Marine Electrician to join our team. The ideal candidate will possess strong technical knowledge and experience working with electrical systems in Tugs/Barges. This role requires a commitment to safety, quality workmanship, and excellent customer service. As a Marine Electrician, your responsibilities will include: • Installing, maintaining, and repairing electrical wiring, equipment, and fixtures., • Troubleshooting electrical issues using tools such as ohmmeters and calipers., • Assembling and installing electrical devices according to specifications., • Providing exceptional customer service by communicating effectively with clients regarding their electrical needs., • Performing maintenance for Tug and Barge service to ensure reliability on job sites., • Collaborating with other tradespeople and service technicians to complete projects efficiently., • Maintaining a clean and organized work area while adhering to safety protocols. Preferred qualifications include: • Proven experience as an Electrician or in a similar role., • Strong marine electrical knowledge with the ability to read blueprints and technical diagrams., • Ability to work independently as well as part of a team in various environments., • Ability to work with VFD., • Travel for work if needed, • Must be able to Work Overtime *Must have a valid TWIC card or able to apply for. *Ability to work effectively in all weather conditions. If you are a motivated individual looking to advance your career in the electrical field, we encourage you to apply for this exciting opportunity. Company DescriptionWe are a growing small business currently seeking a reliable and enthusiastic Marine Electrical Technician to join us. We pride ourselves on providing high-quality marine services and are looking for a dedicated professional who is passionate about the industry and committed to delivering excellent technical results.We are a growing small business currently seeking a reliable and enthusiastic Marine Electrical Technician to join us.\r\n\r\nWe pride ourselves on providing high-quality marine services and are looking for a dedicated professional who is passionate about the industry and committed to delivering excellent technical results.

Job DescriptionGENERAL NATURE OF POSITION: The Residential Worker is responsible for carrying out the day-to-day function in the house. This includes securing the well-being and safety of the residents. Responsibilities also include keeping up with maintenance and repairs of the house, the vehicle, appliances, and equipment. The Residential Worker reports directly to Program Manager. ESSENTIAL JOB FUNCTIONS: Track unusual and major incidents Participates in staff meetings and other meetings as appropriate Responsible for being on-call Performs other related duties as assigned Providing support and guidance to the individuals in the house to ensure the following: That the house, the appliances, the vehicles and the equipment are safe, operational and in good working order. That the fundamental rights of each adult in the house are protected Residential Workers are bound by an 8 hour shift. The following are the specific duties within a job typical X-hour shift. Hours and duties may vary depending upon specific circumstances and will be handwritten and initialed into this employment agreement. Responsible for overseeing all cleaning duties by clients. Responsible for cleaning anything that have not been completed by the clients. 3pm-11pm Supervising and assisting the individuals in the house with menus, food preparation, housekeeping, personal care, laundry, and other activities of daily living. Planning and coordinating appropriate leisure, social and daily living activities in the residence and in the community. This includes transporting the individuals to and from their destinations. These activities also include shopping trips and medical, dental, and mental health appointments. Assuming responsibility for the individuals in the house during the day when they are unable to attend the day program (e.g. for illness, inclement weather, etc.). The supervisor will make every effort to arrange coverage, however, the final responsibility rests on the residential staff. Meeting deadlines and completing all necessary paperwork. This includes quarterly reports, monthly reports, fire drill records, attendance records, weight charts, house receipts, daily logbook, etc. The Residential Worker shall be trained by Real House, Inc.s APN and will carry out the duties of Medication Technician 11pm-7am During the hours of 11pm-7am, the House Manager will be offered adequate sleeping facilities by Real House, Inc. 7am-3pm (7am-9am) Responsibilities include providing assistance to the extent necessary for each of the individuals in the home to prepare for their day. That includes assisting with all personal hygiene tasks, dressing, preparing breakfast and cleaning up afterwards. (9am-3pm) During this shift the House Manager is considered on call, however remaining on the premises is typically not necessary. Being on call requires that you leave information with your supervisor as to where you may be reached. QUALIFICATIONS: Required and Preferred Education and Experience: High School diploma or general education degree (GED); and one to two years related experience and/or training; or equivalent combination of education and experience. Ability to work with diverse populations. Good oral and written English skills. If an individual is in recovery, five-six years of sustained recovery is required. Ability to work well within a team environment. Computer skills: Microsoft Office and web-based application. Ability to answer telephone calls in a professional manner and assists callers The Residential Worker must be at least 25 years Physical Requirements: Ability to lift 50 pounds Occasionally required to stand and walk. Certificates and Licenses: Valid New Jersey drivers license and personal automobile and/or access to an automobile. CPR and First Aid Must successfully pass a background check prior to hire.

Job Description Summary: A Medical Laboratory Technician is required to perform routine medical laboratory tests for the diagnosis, treatment and prevention of disease under direct supervision of a qualified supervisor. Responsible for operation of the laboratory. Essential Functions: To accomplish this job successfully, an individual must be able to perform, with or without reasonable accommodation, each essential function satisfactorily under direct supervision of a qualified supervisor. Reasonable accommodations may be made to help enable qualified individuals with disabilities to perform the essential functions. Early morning or evening shift. · Perform technical laboratory functions including chemistry, hematology, urinalysis, immunology and /or other discipline(s) according to approved policies and procedures in which the individual has been trained. · Report test results following approved laboratory protocols alerting clinicians about abnormal results. · Ensure quality control, maintain integrity of samples, and maintain accurate record keeping. · Maintain laboratory equipment and supplies. · Set up, maintain, calibrate, clean, and troubleshoot medical laboratory instruments. · Comply with all laboratory policies and OSHA, CAP, CLIA, and additional state regulations related to safety, cleanliness and infection control. · Assist Lab Management as needed. · Perform all other duties as assigned. Skills: · Knowledge of medical laboratory principles, standards, applications, terminology and tests. · Knowledge of medical laboratory safety, cleanliness and infection control policies and regulations. · Knowledge of medical laboratory equipment and instrument uses and maintenance. · Accuracy – Ability to perform work accurately and thoroughly. · Communication – Ability to communicate effectively verbally and in writing. · Computer Skills – Proficient ability to use a computer and electronic medical record. · Confidentiality – Maintain patient, team member and employer confidentiality. Comply with all HIPAA regulations. · Customer Service Oriented – Friendly, cheerful and helpful to patients and others. Ability to meet patients and others needs while following office policies and procedures. · Detail Oriented – Ability to pay attention to the minute details of a project or task. · Flexibility – Ability to adapt easily to changing conditions and work responsibilities. · Positivity – Display a positive attitude and is a positive agent for change. · Teamwork – Work as part of a team and collaborate with co-workers. · Working Under Pressure – Ability to complete assigned tasks under stressful situations. Education and Experience: · Associate’s Degree or higher preferred · One-year clinical laboratory experience preferred Certification and Licensure: · ASCP, AMT certification or NYS license preferred Work Environment: · Environmentally controlled clinical laboratory environment · Fast paced environment with occasional high pressure or emergent situations · Frequent exposure to bodily fluids · Possible exposure to infectious specimens, communicable diseases, hazardous and toxic substances, and other conditions common to a laboratory environment · Must wear Personal Protective Equipment (PPE) such as gloves or a faceshield · Frequent interaction with a diverse population including team members, providers, patients, regulatory and accrediting agencies, and other members of the public Physical Demands: · Frequent standing, walking, grasping, carrying and speaking · Occasional sitting, reaching, bending and stooping · Lifting, carrying, pushing and pulling up to 50 pounds, with assistance if needed · Frequent use of computer, keyboard, copy and fax machine and phone · OSHA Category 1 Company DescriptionAccu Reference is a state-of-the-art medical testing laboratory service that provides a complete range of tests for diagnosis, screening or evaluation of diseases and health conditions. We are certified under the federal government’s Clinical Laboratory Improvement Amendments (CLIA) and operate in compliance with all governmental regulations. We use the latest diagnostic technology. Accu Reference is an equal opportunity employer.Accu Reference is a state-of-the-art medical testing laboratory service that provides a complete range of tests for diagnosis, screening or evaluation of diseases and health conditions. We are certified under the federal government’s Clinical Laboratory Improvement Amendments (CLIA) and operate in compliance with all governmental regulations. We use the latest diagnostic technology. Accu Reference is an equal opportunity employer.

The Central Service Technician utilizes technical skills daily to operate sterilization equipment and ensure instruments meet safety standards. Completion of a Central Service Technician training program or equivalent experience in sterile processing. Certification as a Certified Registered Central

Job Description At First Student, our Location Safety Managers are a constant reflection of our companys commitment to safety and customer service. The Location Safety Manager is responsible for providing operational oversight, providing work guidance, and delivering leadership to full safety supervisory duties. At First Student, we are proud to offer: $50,000/year Tremendous Career Advancement Opportunities due to a strong presence across North America Positive and rewarding work environment Location Safety Manager Responsibilities: Administers driver hiring and compliance process Provides direction and guidance to location trainers Investigates accidents, incidents, and work-related injuries and determines fault/probability Prepares and submits accident-related compliance forms, maintains files, and enters in system Provides assistance and training to drivers and attendants on passenger management and other safety related issues Performs driver road checks of driver performance Supervise employees with safety and/or driver hiring or training responsibilities Provides various reports and analyzes safety trends Location Safety Manager Experience and Skills Required: 2-3 years transportation or safety-related experience High school diploma or equivalent Knowledge of federal and state rules and regulations regarding safety and environmental issues Computer literacy with Microsoft Word, Excel and PowerPoint Consistent attendance and punctuality Possess working vehicle for travel in service area First Students commitment to putting our customers first, dedication to safety, and an ambition to deliver dependable transportation makes for a working environment youll love. As a huge company with 120,000 staff and over 2.5 billion customers worldwide, youll also enjoy security, a brilliant future, and excellent training. Apply today to join our team! We aspire to have a culture where all people are First. We strive to attract and retain a diverse workforce therefore all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. For candidates applying to positions in San Francisco or Los Angeles California, First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance or Los Angeles Fair Chance Ordinance. First is an equal opportunity employer and by doing so we will sustain and promote an inclusive culture that supports future growth for all." First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request .

Job Description About the Role: The X-Ray Technician in Bayonne plays a critical role in the diagnostic process by producing high-quality radiographic images that assist physicians in diagnosing and treating medical conditions. This position requires meticulous attention to detail to ensure patient safety and image accuracy while adhering to established protocols and radiation safety standards. The technician will interact directly with patients, explaining procedures and ensuring their comfort throughout the imaging process. Collaboration with radiologists and other healthcare professionals is essential to facilitate timely and accurate diagnosis. Ultimately, the role contributes significantly to patient care by providing essential imaging services that support effective medical decision-making. Minimum Qualifications: • Completion of an accredited radiologic technology program., • Certification as a Radiologic Technologist (ARRT or equivalent)., • Valid state licensure to practice as an X-Ray Technician in the United States., • Strong understanding of radiographic techniques and radiation safety principles., • Experience working in a hospital or clinical setting., • Additional certifications in specialized imaging techniques (e.g., CT, MRI)., • Familiarity with electronic medical records (EMR) systems., • Bilingual abilities to assist a diverse patient population., • Prepare and position patients correctly to capture the required radiographic images., • Operate X-ray equipment safely and efficiently, ensuring compliance with radiation safety guidelines., • Maintain accurate patient records and document imaging procedures performed., • Collaborate with radiologists and healthcare team members to review images and ensure quality standards are met., • Perform routine maintenance and quality control checks on imaging equipment., • Educate patients about the imaging process and address any concerns to ensure their comfort and cooperation. The required skills enable the X-Ray Technician to accurately position patients and operate imaging equipment to produce clear diagnostic images while minimizing radiation exposure. Effective communication skills are essential for explaining procedures to patients and collaborating with medical staff to ensure optimal imaging outcomes. Attention to detail and organizational skills are used daily to maintain precise records and adhere to safety protocols. Preferred skills, such as experience with advanced imaging modalities and EMR systems, enhance the technician's ability to support a broader range of diagnostic services and streamline workflow. Continuous learning and adaptability allow the technician to stay current with evolving technologies and best practices in radiologic care.

Job DescriptionSalary: $35-$45 p/h - Based on experience Come join a team that has been in business for over 39 years! We take great pride in our exceptional reputation in the commercial HVAC industry built on the quality of our work and the dedication of our loyal employees. We offer a comprehensive benefits package, competitive salaries, and company-sponsored events throughout the year. Our leadership team is transparent about the direction of the company and our goals, so every team member understands where were headed. We invest in our people and training, and were looking for individuals who think outside the box and want to grow with us. If this sounds like you, keep reading! POSITION SUMMARY: Critical thinker and self-starter, willing to go the extra mile and stay committed to educating themselves in our constantly changing field. Candidates should have extensive experience with pipefitting techniques for grooved, copper, PVC, threaded and black piping. Candidates should also be comfortable working with little supervision and possess a strong work ethic and team mindset Requirements and Qualifications: • Minimum 5 years of Commercial Pipefitter field experience(We are not seeking entry-level applications with only schooling experience or those with residential experience only), • Grooved Piping, • Threaded Piping, • Copper Piping (Sweat, Pro-Press, Brazed), • PVC Piping, • Black Pipe Piping, • Welded Pipe -experience is a plus, • Refrigerant piping (brazing) - experience is a plus, • Certification through the Environmental Protection Agency to handle refrigerants is a plus (Universal or Type I & Type II, 410A), • High School diploma or GED equivalent, • Knowledge of hand cutting tools, electric saws, and electrical and gas equipment., • Safety-minded and knowledge of OSHA & NFPA safety regulations., • Current valid drivers license for operating motor vehicles in the state of New Jersey, • Must be punctual, dependable and adhere to a daily schedule with multiple appointments in different locations, • Must be available for seasonal overtime during the summer and winter months, • Must have professional appearance, basic writing and computer skills, customer service skills, • Must have strong installation skills with ability to think outside of the box, • Experience with commercial HVAC/R is a plus:, • Split Systems, Package Units, Ductless Systems, Heat Pumps, Cooling Towers, Boilers, PTAC units, VAVs, Chillers, etc., • Candidate should reside in the NJ area to be considered Duties and Responsibilities: • Travel to project locations, often multiple daily, as required, • Install HVAC/R equipment to ensure proper operation in accordance with established procedures and according to code., • Perform other duties as required to maintain equipment and follow all company and customer safety policies and procedures., • Maintain all site locations for safety and cleanliness before, during and after services are provided. Working Conditions: Pushing, pulling, and lifting various types of equipment. Walking, standing, and stooping for extended periods of time. Climbing and working from ladders and staging while carrying equipment that may weigh up to 75 lbs. Working at difficult angles to perform repairs. Working in all types of weather conditions. May be exposed to dust, noise, heat, cold, lubricants, and chemicals during the course of work. The above statements are intended to describe the general nature and level of the work being performed by people assigned this job. They are not an exhaustive list of all duties, responsibilities, knowledge, skills and abilities associated with the job. Job Type: Full-time and project location based, 7AM - 3:30PM Daily We are a drug free company and require all employees to pass a drug test prior to beginning employment Company Benefits: • Competitive Industry Salary based on experience and training, • Paid Vacation Days, • Paid Sick Days, • Paid Holidays, • Health Care (contributory), • Dental Plan (employer paid), • Vision Insurance (employer paid), • 401K Matching, • Pretax Flexible spending account (FSA), • Cell Phone, • Company Issued Uniforms, • Company Issued EZ-pass, • Technician Training (In-House & School Based), • Employee Referral Program

Job Description Dietetic Technician – Contract Location: New York, NY 10032 Duration: 13 Weeks Compensation • Pay Rate: $30.00/hourShift & Schedule, • Day Shift, • 8-hour shifts (11:00 AM – 7:00 PM), • 5 days per week (40 hours/week), • Assist in preparation and distribution of patient meals, • Support daily operations of hospital dietary and nutrition services, • Maintain accurate dietary records and documentation, • Ensure compliance with food safety and sanitation guidelines, • Utilize electronic feeding management systems, • Collaborate with clinical and nutrition teamsRequirements, • High School Diploma or GED (Required), • Associate Degree (Required), • Minimum 2 years of hospital nutrition-related experience OR enrollment in an approved nutrition program, • Strong communication and interpersonal skills, • Basic computer proficiency (Microsoft Office or similar systems), • Good mathematical skills, • Food Safety Certification (must be obtained within 6 months of hire)Preferred Qualifications About Navitas Healthcare, LLC certified WBENC and one of the fastest-growing healthcare staffing firms in the US providing Medical, Clinical and Non-Clinical services to numerous hospitals. We offer the most competitive pay for every position we cater. We understand this is a partnership. You will not be blindsided and your salary will be discussed upfront.

Job DescriptionCompany Description DCS is a family owned and operated business with treating all employees like family at the core of our values. Our employees provide innovative, safe, and high-quality infrastructure/maintenance contracting services to State DOTs, railroads, and other commercial/residential customers across the entire United States. Employees receive generous compensation packages, employee engagement events & career development programs, just to name a few of the perks of being part of the DCS family! To provide quality service, we need top-of-the-line employees. That is why we offer great compensation, awesome benefits, and a work environment worth bragging about! Job Description DeAngelo Contracting Services (DCS) is looking for a motivated and skilled Hi-Rail Technician with a positive attitude, strong ethics, mechanical expertise, and a strong focus on safety. This position involves spraying herbicide across various railroads and managing the maintenance and operation of trucks and equipment. Major Duties and Responsibilities: • Supervise and manage all jobs/contracts assigned., • Apply herbicides for weed, grass, and brush control across different railroad locations., • Handle daily routing and scheduling tasks., • Perform daily tank mixing of chemicals., • Conduct truck inspections and manage the maintenance and repairs of the truck and spray system., • Calibrate all spray equipment., • Ensure all work is carried out in adherence to strict safety protocols., • Maintain daily and weekly records., • Serve as the primary point of contact with customers., • Address customer and public complaints professionally., • Report any potential liabilities immediately., • Possess a thorough understanding of various weed, grass, and brush species., • Have in-depth knowledge of the chemicals used, including what they control and their safety requirements., • Fully understand application methods, equipment, calibration, and spray patterns.Qualifications EDUCATION: • Must be 21+ years of age., • A valid state drivers license with at least 5 years of clean driving history., • Commercial drivers license preferred., • Willingness to travel away from home for up to 4-6 weeks at a time (hotel expenses covered by DCS)., • Must pass a pre-employment drug test, DOT physical, and background check to work on railroad property., • Commercial Pesticide Applicator License is preferred., • Standard work schedule is Monday through Friday, 7 AM to 4 PM, with shifts typically ranging from 10 to 12 hours., • Some weekend or night work may be required., • Occasional travel to offices during breaks for truck/equipment maintenance., • Work hours may vary based on weather conditions and workload., • Spraying is a seasonal task, aligned with the regional office schedule., • Identifying various weeds, grass, and brush species., • Understanding which chemicals control specific plant species., • Safely operating application equipment., • Learning different field application methods., • Understanding how to properly maintain equipment. Additional Information Benefit Highlights: • Challenging and rewarding work environment, • Competitive Compensation, • Excellent Medical, Dental, Vision and Prescription Drug Plan, • 401(K), • Generous Paid Time Off, • Career Development, • Increase in pay if prior experience in Hi-Rail/Vegetation Spray Industry. Come be a part of the DeAngelo family, today! DCS is an equal opportunity employer and complies with all hiring and employment regulations. In the event an ADA accommodation is needed, DCS is happy to help all employees achieve gainful employment in an atmosphere where they are appreciated and respected. DCS offers subcontracting services to government agencies as such, candidates may be subject to pre-employment screenings such as criminal background checks, pre-employment, post-accident & reasonable impairment drug screenings, motor vehicle record checks, etc. as such, DCS complies with all federal and state regulatory guidelines including the FCRA.

Job Description Senior Construction Inspector - Transportation & Infrastructure Location: Woodbridge, NJ Employment Type: Full-Time | On-Site Salary Range: $100,000 – $150,000 annually (based on experience) Industry: Construction Management | Transportation | Infrastructure | Bridge | Civil Engineering About Garg Consulting Services, Inc. Garg Consulting Services, Inc. (Garg) is a leading multidisciplinary engineering and construction management firm specializing in transportation infrastructure, rail, bridge, and civil construction projects throughout the Northeast. Position Overview Garg Consulting Services, Inc. is seeking an experienced Senior Construction Inspector to support transportation infrastructure construction projects throughout Northern and Central New Jersey. This role supports NJ DOT, NJTA, NJ Transit, and public-sector roadway, bridge, rail, and civil projects, ensuring compliance with approved plans, specifications, and safety standards. The Senior Construction Inspector performs advanced field inspections, coordinates daily with contractors, engineers, and client agencies, and oversees construction quality, documentation, and pay quantities. This full-time, on-site position may also provide technical leadership and mentoring to junior inspection staff. Key Responsibilities • Perform and oversee daily field inspections of roadway, bridge, rail, and transportation infrastructure projects., • Ensure construction activities comply with approved plans, specifications, and contract documents., • Serve as the senior field representative and liaison between contractors, engineers, and client agencies., • Document daily construction activities, quantities, labor, equipment, and progress using digital reporting tools., • Track and verify pay quantities and assist with review of progress payments and estimates., • Review material certifications, test results, and submittals prior to installation., • Inspect traffic control and erosion control measures for compliance with approved plans and regulations., • Identify non-conforming work and coordinate corrective actions., • Assist with change orders, field modifications, and as-built documentation., • Lead and mentor junior inspection staff as required., • Attend construction meetings and provide technical field input., • Support project closeout activities including final inspections and punch lists.Required Qualifications & Certifications, • Bachelor's degree in civil engineering, Construction Management, or related field OR equivalent experience., • Minimum five (5) years of experience as a Senior Construction Inspector or Resident Engineer., • New Jersey P.E. license or NICET Level IV Highway Construction Inspection certification., • ACI certification., • NJ SAT Asphalt Technician certification., • Rutgers Traffic Control Coordinator certification., • OSHA 30-Hour Construction Safety certification., • Ability to perform quantity calculations and interpret plans and specifications., • Proficiency with digital inspection tools and Microsoft Office., • Ability to work in varied weather and field conditions., • TWIC Card eligibility and background screening compliance.Preferred Qualifications & Experience, • Experience on NJ DOT, NJTA, NJ Transit, or public-sector transportation projects., • Rail, bridge, and complex transportation infrastructure experience., • Experience mentoring or overseeing junior inspectors., • Familiarity with Document Control and Project Management Programs such as SiteManager, FieldManager, Bluebeam or Procore., • Additional certifications such as CMIT, EIT, CCMCompensation & Benefits, • Competitive Salary: $100,000 – $150,000 annually, • Medical, Dental & Vision Insurance, • 401(k) Retirement Plan with Company Match, • Paid Time Off & Paid Holidays, • Performance-Based Bonuses, • Professional Development & Licensing Support Final candidates are required to undergo a background check and a pre-employment drug screening. These screenings may include employment and education verification, reference checks, and a criminal history check as allowed by law. All screenings are conducted in accordance with federal, state, and local requirements, including the Fair Credit Reporting Act (FCRA). Employment offers are contingent upon the successful completion of all required checks.

Job Description Job Specific Competencies: Directly accountable for preventing hospital acquired infections related to hand-hygiene performance of self and staff Under direct supervision, assists the operating surgeon in the care of patients in surgery and performs assigned selected duties. Prepares for surgery in an acceptable time frame. Prioritizes workload and prepares for the specific operative procedure utilizing appropriate Preference Care/Case Cart Requisition. Demonstrates acceptable standards of aseptic technique when scrubbed and a working knowledge of the surgical procedure, instrumentation, supplies and equipment needed.. Responds appropriately to any unanticipated or emergency situation that may arise intra-operatively & assists with CPR of patient during cardiac arrest. Utilize equipment properly, according to manufacturers recommendation and adhering to OR protocols. Ensures OR is stocked and ready for each case. Assures equipment is cleaned and maintained for use by the next staff member and/or patient. Follows the hospital's policy and procedures on discarding contaminated and hazardous materials. Maintains established hospital policies, procedures, directives, quality assurance,safety, environmental and infection control standards appropriate to this position. Performs other duties as assigned within the scope of practice. EDUCATION + EXPERIENCE REQUIREMENTS: High School Diploma or Equivalency Graduate of Accredited Surgical Technology Program approved by: CAAHEP - Commission on Accreditation of Allied Health Education Programs or ABHES - Accrediting Bureau of Health Education Schools. CREDENTIALS + QUALIFICATIONS: BLS by approved by AHA - American Heart Association Surgical Technician Certification (CST) Authorized by: NBSTSA - National Board of Surgical Technology and Surgical Assisting *Must be certified within 90 days of employment

Job Description Hi, we're Nuts.com! Nuts.com is a self-funded, profitable, rapidly growing multi-channel DTC specialty food and wellness company with over 550 people on our team. We're changing the landscape of snacking on nuts, dried fruit, chocolate and more! We planted our roots in Newark, New Jersey during the Great Depression, selling premium nuts on Mulberry Street's open-air market. We've come quite a long way since then, taking our multi-generational family business online in 1999. Even after 96 years, we continue to pride ourselves in expertly sourcing the highest quality foods and treating our customers like family. What's our team like? We're driven, collaborative and entrepreneurial. Energy and passion power our business and we look for candidates who share in that excitement to help us continue to build something special. The role: The Quality Assurance Technician is responsible for the frontline monitoring of Food Safety and Quality policies, programs, and procedures. This role supports the facility in meeting quality assurance, food safety, and regulatory requirements by partnering with Operations to ensure the consistent production of wholesome, high-quality products. This position reports to the Quality Assurance Manager and serves as a key technical resource on the production floor, assisting in maintaining an "audit-ready" facility while ensuring constant compliance with SQF and FDA regulations. How you'll make an impact * Report and document any food safety or quality issues to the QA Manager and/or SQF Practitioner immediately. * Conduct pre-operational inspections and review checklists to release production areas for daily use. * Perform swabbing (ATP, allergen, biological, etc.), product sampling, and other quality testing. * Conduct daily audits on Good Manufacturing Practices (GMPs) to ensure compliance with 21 CFR 117 and Safe Quality Food (SQF) standards. * Inspect raw materials, work-in-progress (WIP), rework, and finished products; perform regular verifications including high-risk product checks and packaging audits. * Monitor the product hold-and-release process, providing documented reports and tracking data for non-conforming goods. * Assist in investigating deviations from procedures and customer complaints, and support root cause analysis to help prevent recurrence. * Support regular calibration and maintenance of essential facility equipment, such as scales and metal detectors. * Partner with the Sanitation team to verify effective cleaning and support operations staff with real-time food safety and product quality questions. * Actively support record-keeping programs (SafeFoods/EQMS/TraceGains) to ensure data integrity and accurate documentation. * Follow and enforce safety rules to prevent injuries; monitor the production floor for associate, visitor, and contractor GMP and Food Defense compliance. * Perform other tasks as assigned by FSQA management to support department and facility goals. What you'll bring: • Bilingual in English and Spanish is strongly preferred, • 2+ years of hands-on experience in a food manufacturing or packaging environment is desirable., • Ability to read, write, and speak English fluently to complete required safety documentation and reports., • Strong computer proficiency, including experience with Google Doc, Sheets, email, and Electronic Quality Management Systems (EQCMS)., • Ability to work comfortably with handheld devices, scanners, and computers for real-time data entry., • Ability to handle fast-paced situations and use good judgment to make quick, common-sense decisions about product safety., • Great organizational skills and a focus on getting details right every time., • Ability to work well with a team while being independent enough to speak up and enforce safety rules., • Ability to stand for long periods and work comfortably on a busy production floor. What we offer: • A high-growth and rewarding role in a foundationally strong and rapidly evolving business, • Hourly Pay Range: $19.00 - $20.50/hour based on experience, • Excellent benefits including a 401K Match, • Paid Maternity, Adoption and Paternity leave Nuts.com is an affirmative action and equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, gender expression, national origin, age, protected veteran or disabled status, or genetic information.

Job DescriptionDescription: As a Driver at Lewis Environmental, you will be a critical part of our team, responsible for driving commercial vehicles to support a variety of Environmental Services projects. Your role will include transporting hazardous and non-hazardous materials, responding to environmental emergencies, and ensuring the safe and efficient operation of all vehicles. This position offers the opportunity to make a significant impact by ensuring safety and compliance in our day-to-day operations and emergency response efforts. Requirements: Key Responsibilities Vehicle Operation: Safely drive commercial vehicles to support a wide range of environmental services projects. Compliance: Maintain all DOT and OSHA certifications required for operating a CDL truck, including transporting hazardous and non-hazardous materials. Safety: Follow all company safety rules and OSHA regulations. Attend required safety training programs to ensure a safe working environment. Emergency Response: Participate as a member of the On-Call Emergency Response Team, responding to environmental spills and other emergencies. Vehicle Maintenance: Perform pre- and post-trip vehicle inspections and ensure all equipment is maintained in excellent working condition. Regulatory Adherence: Ensure compliance with all regulations regarding the transportation of hazardous and non-hazardous waste. Team Collaboration: Perform Service Technician duties as part of our team-based operations philosophy, assisting in the completion of various environmental tasks. Qualifications Experience: Minimum 2 years of experience as a CDL driver, preferably with hazardous material handling experience. Licensing: Valid CDL license with Hazmat and Tanker endorsements required. Motor Vehicle Record: Clean Motor Vehicle Record (MVR) and successful completion of a criminal background check, including an acceptable FMCSA record. Safety & Compliance: Strong commitment to safety, quality, and compliance with all industry regulations. Training: 40 hours of OSHA and related safety training is a plus, though training will be provided. Availability: Willingness to work flexible hours, including being on call during weekends and after hours. Physical Requirements Vehicle Operation: Ability to sit for extended periods while operating a motor vehicle. Manual Labor: Ability to lift up to 60 lbs. and perform manual labor tasks as part of daily duties. Weather Conditions: Ability to work in severe weather conditions, both hot and cold. Confined Spaces & Safety Gear: Ability to work in confined spaces and wear a respirator as needed. Clean shaven requirements for respirator use. Physical Effort: Ability to stand and exert physical effort performing manual labor 50-70% of the time. Noise Exposure: Able to tolerate exposure to moderate noise levels. Why Join Us? At Lewis Environmental, we are dedicated to fostering a supportive and inclusive environment where safety, teamwork, and professional development are prioritized. We offer opportunities for growth and provide comprehensive training and support to ensure that our team members succeed and thrive. Equal Opportunity Employer Lewis Environmental is an Equal Opportunity Employer and is committed to building a diverse workforce. We do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. All qualified applicants will receive consideration for employment without regard to any protected characteristic.

Job Description World Class Medicine. Purpose-Driven Partnership. Veritas Veterinary Partners offer exciting career opportunities in state-of-the-art facilities across the U.S. Our hospitals, open 24/7/365 and staffed by board-certified specialists, create a collaborative environment where you can work alongside like-minded, caring professionals. If you're passionate about veterinary medicine, this is your chance to thrive in a dynamic, high-quality setting. At Veritas Veterinary Partners, our mission is to build a network of trust and opportunity for veterinary professionals nationwide. We specialize in supporting Specialty and Emergency care hospitals, aligning with your unique goals and medical standards. Veritas, founded by Thomas Scavelli, DVM, DACVS, is dedicated to recruiting top-tier talent and fostering collaboration within our community. With a focus on exceptional care, we bring together highly trained veterinarians, technicians, and teammates committed to our patients' well-being. We believe in Truth in Medicine and Trust in Partnerships, ensuring we always provide the highest standard of care. Come join us and make a meaningful impact on the community you serve. Garden State Veterinary Services in Woodbridge, NJ s excited to announce we are hiring an experienced veterinary technician to join our Surgery Department. The preferred candidate would work alongside our Surgeon and have anesthesia experience. Schedule: Wednesday - Saturday, 7:30am - 6pm or Wednesday - Saturday, 8:30am - 6:30pm Shining a spotlight on our amazing veterinary technician: Veritas Role Spotlight: Veterinary Technician Specialist (youtube.com) About GSVServices: We are a multispecialty practice with boarded specialists in cardiology, internal medicine, surgery, radiology, and critical care. Our clients and patients also have access to ophthalmology, oncology, radiation oncology, neurology, dermatology, and radioactive iodine treatment. Why GSVServices: We are not your typical veterinary hospital! We know the winning recipe to maintain the care and compassion that our patients depend upon us for, is to create a safe and supportive space for you to put your skills to use, develop new skills, and be a part of our highly collaborative, fun, and friendly team! We are proud of our company culture and positive staff engagement within a fast paced, learning environment; and our associate employment longevity is proof of our commitment to take care of one another, and provide the highest standard of care to the patients we serve. Veterinary Technicians at GSVServices work along specialists and have access to the most advanced diagnostic tools to provide the best possible care. On any given day, you can expect to do the following: • Assist with general anesthesia and sedated procedures, • Set up CRIs and calculate medical math, • Place IV catheters and institute fluid therapy, • Position appropriately for radiographs and understand radiation safety, • Provide quality, compassionate care for hospitalized patients, • Prepare and administer transfusions: Blood and Plasma, • Maintain accurate treatment sheets and anesthesia records, • Understand capnography, pulse oximetry, ECG and blood pressure monitoring, • Obtain and prepare various blood samples for diagnostic testing, • CVT/LVT/RVT preferred, or a minimum of 2 years' experience as a Technician, • Comprehensive understanding of and experience with anesthetic monitoring, • Proficiency in processing basic laboratory specimens, • Working knowledge of anatomy and physiology, • Understanding of normal vs abnormal physiologic ranges, • Commitment to help mentor and train veterinary assistants, • Ability to work well in a highly collaborative environment, • Commitment to develop long-term relationships with colleagues, clients, and community, • Positive outlook and friendly, team-orientated attitude, • Excellent communication and organizational skills, • The ability to deliver exceptional client service Salary: $23/hr - $34/hr depending on skills, experience, and credentials GSVServices is proud to offer the following benefits: • Competitive salary based on your level of experience, • Health, dental, and vision insurance, with HSA option- some plans paid 100%, • Maternity/Paternity leave, • Retirement Plan – 401K with employer match, • Licensing fees paid for credentialed technicians, • Employee Referral Bonus, • Paid Time off, • Mental health support with Talkspace, • Uniforms provided, • Full Time and credentialed technicians eligible for Sign On Bonus Veritas Veterinary Partners is an equal opportunity employer. In accordance with the requirements of all applicable federal, state and local laws, we welcome and encourage diversity in the workplace regardless of race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Applicants must be authorized to work in the U.S. All current positions require the ability to speak, read, and write English proficiently. Additional fluency in other languages is preferred but not required. For CA applicants please visit our Privacy Policy

Job DescriptionDescription: The Company Miner Ltd, an OnPoint Company, is an industry-leading service and equipment solutions provider with branch-based operations across the country. OnPoint Group is a fast-paced and ever-changing company and has been awarded the Best Managed Companies Award by Deloitte and WSJ for three years running, as well as having been named to the Inc. 5000 Fastest Growing Companies list for eight consecutive years! We believe in challenging the status quo and finding a better way for our customers, which is how we have grow into the company we are today. Miner drives down the cost of warehousing and materials management operations saving our customers revenue and time by understanding their business, finding efficiencies in their operation, providing faster systems repairs and delivering expertly executed scheduled maintenance. For more than 20 years, Miner has consistently delivered professional emergency maintenance service, equipment analysis and proactive preventative maintenance solutions to companies throughout North America. Miner solutions leave their customers more time to focus on their core business – not on the business of maintenance and materials management. Job Summary Our Dock & Door Technicians a.k.a. “Service Professionals” are the core of our preventative and emergency response services for our customers. You may call them a “technician”, but the role is more than using tools to fix broken items. Service Professionals are on the road, troubleshooting complex issues in places like commercial buildings, aircraft hangers, schools, fire/police departments, and much more. A Service Professional might spend an hour fixing a broken door for a hospital garage and an hour later they could be heading to a large warehouse to fix loading dock equipment. This role has unique access to see the inner workings of some of the largest operations in North America, and that’s just before lunchtime. Our people make us great and for us, that starts with finding the right person to fill our open positions. Anyone interested in this role should be able to answer yes to these questions: 1. Do I enjoy variety and complexity?, 2. Does the idea of autonomy and independence excite me?, 3. Can I have fun, while keeping it safe and efficient?, 4. Am I looking for a career family and not just a job?, 5. Would my friends and family describe me as a “tinkerer”? If you answered yes to those questions, we invite you to keep reading and hit that apply button! Room for Growth The exciting news about being a Service Professional is that you can start where your current skills best align with the level of work. Miner offers four levels of Service Professionals so that you can gain, advance, or refine your dock and door abilities. • Apprentice Level (Level I) – best for candidates who have a passion for learning and a willingness to train. Experience working in any related field is a plus, but most importantly an understanding of mechanics and the ability to fix a variety of products is needed., • Service Professional Level (Level II) – this is the sweet spot for anyone who has at least a year of experience in a related field and knowledge of the basic concepts of electrical and hydraulic troubleshooting. Service professionals are well attuned to customers and can communicate effectively while in the field., • Senior Level (Level III) – possesses experience in basic repairs in the AED, Highspeed, or gate fields with a proficient understanding of hydraulic and electrical troubleshooting. Candidates will typically have 4 years of experience in this field. What You’ll Do Service Professionals are responsible for hands-on customer care. They troubleshoot, service, inspect, install, and repair industrial equipment of all shapes and sizes. There is paperwork involved (what job doesn’t have it), as a Service Professional there is expectation that work orders be maintained on paper and digitally. The role operates a vehicle regularly to visit different customer sites and plays a major part in maintaining safety and OSHA compliance for the Company. Requirements: What We Look For Qualified candidates answered “Yes” to all of our questions AND will have in their toolbox, the following skills: • 2-4 years of relevant experience…we care more about how you execute, the quality of your work product, and if you can make an impact to Miner customers., • Ability to repair industrial facilities, including doors, loading docks, and dock-leveler’s., • Ability or a desire to learn welding, steel fabrication, and electrical. If you have Hydraulic and Pneumatics experience, awesome, call it out on your submission so we know where to find you!, • Ability to take direction and work independently while on the road for hours each day., • Strong communication, problem solving, and analytical skills. The ability to think through complex situations critically is a must., • Technical school training and OEM certifications are desired but not required., • Ability to work a flexible schedule, with nights, weekends, and Holidays. Overtime opportunities are available, so a willingness to work is what we need. We thought you’d never ask. Take a peak at our benefits page to learn more about the Benefits offered to all Miner employees. In addition to those benefits, Service Professionals can look forward to: • Competitive pay, including quarterly bonus incentives, • Uniform and boot allowance, • Training and the opportunity for growth, • Company issued truck for work travel, can be taken home as well, • Autonomy and independence, • Competitive PTO and Paid Holidays Miner Ltd. considers applicants for all positions without regard to race, color, religion, creed, gender, national origin, age, disability, genetic information, marital or veteran status, or any other legally protected status. Disclaimer This job posting may also appear on other job boards. While we encourage you to explore these opportunities, please be aware that we do not endorse or control the content on these external sites. We are not responsible for the accuracy, completeness, or reliability of information posted on other job sites, and we are not liable for any damages or losses that may arise from your use of that information. You are solely responsible for verifying the accuracy and completeness of any information you obtain from external sources. Salary Range The pay range noted represents the company’s good faith minimum and maximum range for this role at the time of posting. The actual compensation offered to a candidate will be dependent upon several factors, including but not limited to experience, qualifications, and geographic location. Employees may be eligible for additional incentive pay.

Job DescriptionResidential Plumbing Service Technician Location: Union, NJ | Type: Full-time Imagine starting your day from your driveway, keys in your assigned truck, first call already on your tablet. You roll to a home in the Union area, greet the homeowner, and expertly diagnose a shower with weak pressure. You walk them through repair vs. replacement, discuss financing and service agreements, and leave them confident in their choice—and pleased to ask for you next time. By afternoon, you’ve prevented a future backup, documented everything in ServiceTitan, and kept your metrics on track. That’s a typical day here. About Service Professionals We’re a family-owned home services company—plumbing, heating, cooling, and electrical—serving most of New Jersey. We’re not a franchise; we’re your neighbors building something we’re proud of together. Compensation & Benefits • Base pay: $25–$50/hr depending on experience, • Uncapped performance bonuses: High performers regularly reach total compensation of $100,000–$200,000+, • Health & dental: Company-paid with deductibles covered, • 401(k): Available for full-time team members, • Take-home truck: Company gas card; dispatched from home—skip the commute, • Career growth: We promote from within and invest in your development, • On-call you can live with: Department-wide rotation means about once every 12–15 weeks, • Steady schedule: While hours can’t be guaranteed, our strong local marketing keeps calendars fullWho Thrives Here, • Pros who take pride in quality work—especially when no one’s watching, • Tech-forward plumbers comfortable with ServiceTitan, iPads, and digital invoicing, • Great communicators who can sit at the kitchen table and guide smart decisions, • People who set high standards and track their own performance numbersWhat You Bring, • Deep experience running residential plumbing service calls and diagnosing real-world issues, • Working knowledge of safety protocols and local codes, • Valid driver’s license with a clean record, • Fluency in EnglishWhat You’ll Do, • Run residential service and repair calls—including the tough ones, • Diagnose problems, resolve issues, and prevent callbacks through proactive insights, • Present clear options—repair vs. replace, financing, and service agreements—so homeowners can choose confidently, • Regularly sit, stand, walk, kneel, squat, and stoop; use hands and fingers to handle tools and controls; hear and speak with customers and teammates, • Reach with hands/arms, climb ladders, and work in hot or cold spaces (including crawl spaces), • Lift 50+ pounds on a routine basis, • Use close vision and adjust focus as tasks require Apply now to join a remarkable team. You should be proficient in: • Plumbing

Job Description Resident Engineer/CM Practice Lead - Transportation & Infrastructure Location: Woodbridge, NJ Employment Type: Full-Time | On-Site Salary Range: $150,000 – $200,000 annually (commensurate with experience) Industry: Civil Engineering | Construction Management | Transportation Infrastructure | Highway & Bridge Projects About Garg Consulting Services, Inc. Garg Consulting Services, Inc. (Garg) is a leading multidisciplinary engineering and construction management firm delivering transportation infrastructure, rail, bridge, and civil construction solutions across the Northeast. Our team supports high-profile public-sector projects with a focus on quality, safety, and regulatory compliance. Position Overview Garg Consulting Services, Inc. is seeking a seasoned Resident Engineer / Construction Management (CM) Practice Lead to support transportation infrastructure construction projects throughout Northern and Central New Jersey. This role supports projects for NJDOT, NJTA, NJ Transit, and other public agencies, overseeing roadway, bridge, rail, and civil construction activities. This is a full-time, on-site role requiring strong leadership, hands-on field experience, and technical expertise. Key Responsibilities • Oversee construction inspection and project management for highway, bridge, rail, and civil infrastructure projects, • Collaborate with project managers, engineers, and contractors to resolve construction-related issues, • Review construction plans, drawings, specifications, and contract documents, • Review and approve RFIs, shop drawings, working drawings, and value engineering proposals, • Perform materials inspection and acceptance prior to installation, • Monitor construction activities for compliance with approved plans and specifications, • Track, document, and manage project issues and field conditions, • Prepare and contribute to monthly project status reports, • Support project pursuits and staffing oversight as a CM Practice LeadRequired Qualifications & Certifications, • Bachelor's degree in civil engineering or construction management, • Minimum 5 years of experience as a Resident Engineer on roadway and bridge projects, • Active New Jersey Professional Engineer (P.E.) license, • ACI Certification, • NJ SAT Asphalt Technician Certification, • Rutgers Traffic Control Coordinator Certification, • OSHA 30-Hour Construction Safety Certification, • Strong knowledge of rail design and construction methods, • Proficiency with inspection documentation software and mobile tools, • Ability to work in varied weather and field conditions, • TWIC Card eligibility and background screening compliancePreferred Qualifications, • Experience with NJDOT, NJTA, NJ Transit, or public-sector transportation projects, • Rail, bridge, and complex infrastructure experience, • Knowledge of construction management and quality assurance practices, • Design-build and conventional delivery experience, • Additional certifications such as CCMCompensation & Benefits, • Competitive salary: $150,000 – $200,000 annually, • Medical, Dental & Vision Insurance, • 401(k) with company match, • Paid Time Off and Paid Holidays, • Performance-based bonuses, • Professional development and licensing support

Job Description About the role The Summer schedule is from mid-May through Labor Day weekend and is primarily a weekend position, including holidays, with more work available throughout the week. Compensation is $110.00 per day, plus $0.58 per mile for vehicle expense reimbursement. What you'll do The primary responsibility of the Summer Field Technician is the collection of water samples from properties with pools, lakes, and beaches throughout New Jersey. Employees are trained in proper and compliant collection techniques as well as transport protocols to a certified laboratory. Qualifications No prior experience is required, but interested candidates must have a valid driver’s license and have access to a reliable vehicle for all scheduled days. Interest in a science-related career is a plus. WEEKEND AVAILABILITY IS REQUIRED About Garden State Laboratories, Inc. At Garden State Laboratories, Inc., we contribute to the protection of public health and safety. We have been a leader in environmental testing for more than 80 years. Our certified laboratories located in Union and Ocean counties are equipped for microbiology and chemistry testing of drinking water, private wells, recreational bathing water, wastewater, and solid/ hazardous wastes for all of New Jersey. WHY JOIN US? At Garden State Laboratories, caring about the well-being of our employees sustainability and growth is what our family-owned business stands by. Garden State Laboratories, Inc. is a great place to work, employees join our team, and they stay. We are committed to providing an atmosphere of development and training for our employees. If you are interested in an environmental services career, this is a ground-floor entry-level role you should consider.

Job Description Triad Service Center is seeking a qualified Field Technician for service and repair of light industrial equipment in the Elizabeth, NJ area. Equipment that is commonly worked on are floor scrubbers, sweepers, handicapped carts, checkout lanes, paint shakers and other commercial customer equipment found in large retail / industrial locations. Technicians will also install, and service grease containment units used in conjunction with deep fryers. This position would utilize a company vehicle regionally and therefore require a valid, good standing driver’s license. The position would be primarily Monday-Friday, averaging 40 hours a week. Vehicle, laptop, cell phone, PAID TRAINING provided. Starting Pay Range: $20-$27. Our Technicians Typical Duties, Tasks, and Responsibilities: • Have Strong mechanical aptitude with the ability to diagnose, repair and complete both service calls and scheduled PMs on light industrial equipment is essential for our mechanics., • Successfully provide customer service by performing on-location preventative maintenance and repairs on customer equipment by performing job duties., • Visually inspects, tests, and listens to machines and equipment to locate causes of malfunctions. As well as dismantles machine parts to detect wear, misalignment, or other problems., • Installs new or repaired parts; clean and lubricates shafts, bearings, gears, belts, and other parts of machinery., • Staying organized by scheduling repairs and PM’s in similar locations on the same day, as time and location permits. Record keeping and reporting of work orders, parts, supplies ordering, and a daily agenda., • Travel can be up to an average of 300 miles per day, • The associate must regularly lift and/or move up to 10 to 50 pounds and frequently lift and/or move up to 100 pounds., • Frequent exposure to moving mechanical parts, risk of electrical shock, fumes or airborne particles, and toxic or caustic chemicals., • Typically, Monday through Friday. Weekends and after hour work is possible provided customer is willing to pay emergency rates. On call status ends at 11 am EST on weekends and holidays, • Safety and Security – Observes safety and security procedures; reports potentially unsafe conditions; uses equipment and materials properly, • Medical, Dental, and Vision Coverage, • Flexible Spending Account – Medical and Dependent Care, • 401K Plan with Company Match, • Company Paid Life Insurance & Voluntary Life Insurance Options, • Company Paid Short-Term Disability Benefits & Voluntary Long-Term Disability Benefits, • Paid Holidays and Paid Time Off Find out more: Powered by JazzHR ghOF4vx4rs

Job DescriptionDescription: Position Summary: As a Field Technician at Lewis Environmental, you will play a critical role in delivering high-quality service across our four primary service lines: Remediation, Waste Transportation, Industrial Maintenance, and Emergency Response. This position offers you the opportunity to work in a dynamic environment, while upholding our Core Values of Safety, Accountability, Integrity, and Quality. You will work closely with Lewis team members to execute various field assignments and contribute to the success of the team and our clients. Requirements: Key Responsibilities: • Execute field assignments under the direction of the Field Supervisor, ensuring all tasks are completed in a safe and efficient manner., • Follow all company safety protocols and OSHA regulations, attending all required safety training and maintaining a focus on safety in all tasks., • Perform industrial cleaning and other manual labor tasks in line with company or client procedures to achieve safety and quality goals., • Travel daily and occasionally overnight for both planned and emergency response services., • Adhere to company policies and industry regulations for handling hazardous and non-hazardous materials safely and responsibly., • Motor Vehicle Record (MVR): Must have a clean driving record., • Valid Driver’s License: Must possess a valid, unrestricted driver’s license., • Availability: Flexibility to work evenings, weekends, and be on call as required., • Strong commitment to Safety, Accountability, Integrity, Quality, and Teamwork., • OSHA Training: 40-hour OSHA certification and/or related safety training is a plus but will be provided if necessary., • This position involves a mix of physical and manual labor in diverse environments. The physical demands include:, • Ability to lift and carry up to 60 lbs., • Ability to work in extreme weather conditions, both hot and cold, and in confined spaces., • Comfortable wearing respirators as necessary for certain tasks – must maintain clean shave., • Travel and work in inclement weather conditions., • Perform manual labor, standing, walking, and exerting physical effort for 50-70% of the workday. Equal Opportunity Employer Lewis Environmental is an Equal Opportunity Employer and values diversity in the workplace. We do not discriminate based on race, color, national origin, sex, disability, or religion. All qualified applicants will receive consideration for employment without regard to any protected class.

Job DescriptionAt Midas we are dedicated to providing quality services to customer vehicles in the areas of inspection, diagnosis and repair utilizing the expertise attained through ASE Certifications and/or years of automotive repair experience. We are looking for automotive technicians/mechanics that are able to work independently of others, while also being able to work collaboratively at times with peers. We have a full-service facility and we are looking for automotive technicians to help us create an environment of success! Responsibilities As a Midas automotive technician, youll be exposed to and have responsibility for performing a wide range of diagnostics, repairs and maintenance, including: • Diagnostics using state-of-the-art computer systems, • Tires and tire repair, • Car heating and air conditioning, • Steering and suspension, • Belts and hoses, • Radiator and engine cooling systems, • Batteries, starting and charging, • Steering and suspension, • Brakes and brake repair, • Oil changes, • Check engine light, • Mufflers and exhaust services, • Visual safety and courtesy inspectionsQualifications, • Ability to repair vehicles independently, while also having experience working well in a team environment, • Knowledge in automotive brakes, exhaust, suspension, & engine diagnostics, • Track record of high personal productivity, • Knowledge of, and adherence to, safety and environmental standards for repair facilities, • Experience using shop equipment such as lifts, tire changing equipment, alignment machines and scan tools, • High School Diploma or equivalent - technical degree a definite plus, • State-specific auto repair certifications, • Valid drivers license, • Own tools/equipment (diagnostic scanner / tools preferred also), • Able to service both foreign and domestic vehiclesBenefits, • Online Training, • Paid Time Off, • Sick Time, • Health Insurance, • Employee Discounts

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Employee discounts, • Health insurance We are looking for Entry Level Technician (C Tech) that are able to work independently of others, while also being able to work collaboratively at times with peers. We have a full-service facility, and we are looking for automotive technicians to help us create an environment of success! Responsibilities As a Midas general service technician, youll be exposed to and have responsibility for performing a wide range of automotive maintenance services, including: • Perform routine vehicle maintenance, including fluid exchanges/flushes and oil changes., • Visual safety and courtesy inspections, • Mounting, balancing, rotating tires and performing alignments., • Replacing batteries, • Changing bulbs, belts and hoses, • Replacing brakes and rotors, • Suspension work, • Maintaining and cleaning shop areas, • Willingness to learn and grow as a technician., • Other shop maintenance items as needed.Qualifications, • Entry level technicians must have prior knowledge of automotive basics, • Knowledge of shop equipment, • Strong mechanical aptitude and troubleshooting skills, • Deadline and detail-oriented, • Ability to thrive in a fast-paced environment

Job Description Job Summary: Our award-winning, Northern NJ repair facility includes three thriving and bustling auto repair shops and we take great pride in our large team of service technicians. We seek all levels of auto technicians, will cross-train from other brands and provide a sign-up bonus for qualified candidates. The Automotive Mechanic/Technician will report to the Service Director. We’re looking for the right fit: A person with a can-do spirit and positive attitude who thrives in a fast-paced, dynamic environment. A confident and self-motivated individual with a pleasant, outgoing personality ready to generate revenue. Job Responsibilities (include but are not limited to): • Up to $75.00/hour car and light truck, • Diesel up to $75.00 / hour, • 50-hour guarantee, • SIGN ON BONUS, • Vacation first year, • 401 K Plan, • Free toolbox pick-up, • Flexible schedule, • Unlimited work, • Writers that can sell, • Stable management, • Guaranteed training, • Two (2) bays for each tech, • Five-day work-week, • Upper management that actually appreciates the hard work of the service department, • Advancement to management path with training, • Permission to work on your own cars (No side jobs, sorry), • All the best special tools and equipment, • Demonstrate behaviors consistent with Maplecrest’s Vision, Mission and Values in all interactions with customers, co-workers, vendors and suppliers., • Adhere to all company policies, procedures and safety standards Equal Employment Opportunity Maplecrest Ford Lincoln does not discriminate in employment opportunities or practices on the basis of race, color, religion, sex, national origin, age, disability or any other characteristic protected by law. In order to provide equal employment and advancement opportunities to all individuals, employment decisions at Maplecrest Ford Lincoln will be based on merit, qualifications and abilities. Job Description The statements included in the job description are intended to outline the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed Powered by JazzHR qMRXJQqTO8

Job Description Service Technician (A to B Level) BRAM Auto Group is one of the largest family-owned businesses in the Tri-State area serving customers in New York and New Jersey for over 50 years. BRAM is a premier automotive management group- we own and operate 12 innovative Dealership Locations representing Lexus, Cadillac, Honda, Toyota, Ineos Grenadier, Genesis and Hyundai Brands. BRAM Auto Group has built a strong company reputation as a workplace that values innovation, upholds superior service, and rewards hard work and success. We offer a competitive total compensation package that includes: Medical, Dental, Vision, Life, 401K, Paid Vacation & Holidays, and more! Our Service Technicians are unionized! The Union benefits include comprehensive Medical, Vision, Dental and Life Insurance plans! Route 22 Toyota is actively seeking a skilled and experienced Service Technician to join our dynamic team. We are looking for professionals with extensive experience as automotive technicians, with a strong preference for those with Toyota-specific expertise. Key Responsibilities: • Perform thorough diagnostics and troubleshooting on various automotive systems, including engine, transmission, electrical, and computer-controlled components., • Utilize advanced diagnostic tools and equipment to identify issues accurately and efficiently., • Conduct comprehensive inspections to determine necessary repairs and maintenance., • Execute repairs and maintenance tasks with precision and attention to detail., • Collaborate with other team members to ensure the timely completion of work orders., • ASE Certification is required., • Lexus/Toyota experience highly preferred, • Strong diagnostic and troubleshooting skills., • Proficiency in using diagnostic tools and equipment., • Experience working with foreign manufacturers is preferred., • Toyota experience is highly desirable., • Excellent communication and teamwork skills., • Job Type: Full-time, • Dental insurance, • Health insurance Ability to Commute: • Hillside, NJ: Relocate before starting work (Required)

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Health insurance We are looking for an Intermediate Level Technician (B Tech) that are able to work independently of others, while also being able to work collaboratively at times with peers. We have a full-service facility, and we are looking for automotive technicians to help us create an environment of success! Responsibilities As a Midas general service technician, youll be exposed to and have responsibility for performing a wide range of automotive maintenance services, including: • Perform a thorough visual safety and courtesy inspection., • Performs tests on specific parts and systems to determine whether they are operating properly., • Mounting, balancing and rotating tires, • Replacing batteries, • Changing bulbs, belts and hoses, • Repairs or replaces malfunctioning parts and systems such as but not limited to brake pads, belts, tires and water pumps., • Performs routine and preventative maintenance including oil changes and tune-ups., • Ability to work on more complex jobs with some assistance such as diagnostics., • Test drive vehicles to confirm that repairs have been made properly., • Maintaining and cleaning shop areas, • Willingness to learn and grow as a technician, • ASE certification preferred but not required., • Intermediate level technicians must have prior knowledge of automotive basics., • Knowledge of shop equipment, • Strong mechanical aptitude and troubleshooting skills with some assistance., • Ability to perform repairs in a timely manner., • Ability to read service manuals, repair manuals and work orders.

Job DescriptionAt Midas we are dedicated to providing quality services to customer vehicles in the areas of inspection, diagnosis and repair utilizing the expertise attained through ASE Certifications and/or years of automotive repair experience. We are looking for automotive technicians/mechanics that are able to work independently of others, while also being able to work collaboratively at times with peers. We have a full-service facility and we are looking for automotive technicians to help us create an environment of success! Responsibilities As a Midas automotive technician, youll be exposed to and have responsibility for performing a wide range of diagnostics, repairs and maintenance, including: • Diagnostics using state-of-the-art computer systems, • Tires and tire repair, • Car heating and air conditioning, • Steering and suspension, • Belts and hoses, • Radiator and engine cooling systems, • Batteries, starting and charging, • Steering and suspension, • Brakes and brake repair, • Oil changes, • Check engine light, • Mufflers and exhaust services, • Visual safety and courtesy inspectionsQualifications, • Ability to repair vehicles independently, while also having experience working well in a team environment, • Knowledge in automotive brakes, exhaust, suspension, & engine diagnostics, • Track record of high personal productivity, • Knowledge of, and adherence to, safety and environmental standards for repair facilities, • Experience using shop equipment such as lifts, tire changing equipment, alignment machines and scan tools, • High School Diploma or equivalent - technical degree a definite plus, • State-specific auto repair certifications, • Valid drivers license, • Own tools/equipment (diagnostic scanner / tools preferred also), • Able to service both foreign and domestic vehiclesBenefits, • Online Training, • Paid Time Off, • Sick Time, • Health Insurance, • Employee Discounts