Short term contract jobs in Piscataway, New Jersey - Page 2Create job alerts

Job Description Job Description Regional North Truck Driver Pay $1,634 ~ $2,019/week - Sign on Bonus $1,125 • Home Time Weekends: 5 days out & 2 days home with your Family Transmission Type: Automatics Drug Test: Urine & Hair Vision Drivers Enjoy Great Benefits Health, Dental and Vision Long and Short-Term disability 401k Life Insurance Paid Vacation Call Anthony 404-300-9003 Job Requirements: • Minimum 9 month driving experience, • Moving Violations:, • No more than 3 in the past 3 years in a CMV, • No more than 2 in the last 12 months in a CMV, • DUI/DWI’s: 1 allowed, but must be outside of 7 years, • Automatic DQ’s:, • Rollover past 4 years, • Lane change accident past 4 years, • Side swipe past 4 years, • Rear end past 4 years, • Improper backing with accident past 3 years, • No Hit and Run/leaving the scene of an accident in the last 5 years, • Felony & Misdemeanor : All reviewable - No pending charges Vision Truck Line LLC is a licensed contract carrier and property broker as defined by the Federal Motor Carrier Administration and the United States Department of Transportation. Headquartered in Conley, GA 30288 contracted throughout the continental United States. Our company has maintained late model fleets of tractor and trailers equipment with GPS tracking and Air Resources Board compliant devices. The entirety of this site is protected by copyright 2025 VisionTruckLine.com

Job Description Job Description REGIONAL FLATBED POSITION - Pay $1,500 ~ $1,600/week - Sign on Bonus of $5,000 - Weekend Home time with your Family MUST HAVE A MINIMUM 6 MONTH FLATBED EXPEREINCE& AT LEASE 1 YEAR OF OTR EXPERIENCE TO QUALIFY 27% of the Load 40% to 50% of the loads require tarping Detention Pay Transmission Type: Automatics Drug Test: Urine Vision Drivers Enjoy Great Benefits Health, Dental and Vision Long and Short-Term disability 401k Life Insurance Paid Vacation Call Anthony 404-300-9003 Job Requirements: • Minimum 1 year driving experience with 6 months of Flatbed experience, • Moving Violations are on a point system, • No DUI/DWI’s in the last 5 years, • Automatic DQ’s: recent at fault rollover in the past year & No failed D.O.T alcohol/drug test lifetime, • Felony convictions will review, cannot hire drivers with any pending case the last 5 years, • MUST HAVE TARPING EXPERIENCE Vision Truck Line LLC is a licensed contract carrier and property broker as defined by the Federal Motor Carrier Administration and the United States Department of Transportation. Headquartered in Conley, GA 30288 contracted throughout the continental United States. Our company has maintained late model fleets of tractor and trailers equipment with GPS tracking and Air Resources Board compliant devices. The entirety of this site is protected by copyright 2025 VisionTruckLine.com

Job Description Job Description Date 06/25 Location 1300 Airport Road, North Brunswick NJ Title Driver Department Warehouse Reports to Manager, Warehouse FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Truck Driver will be responsible for transporting goods from one place to another using trucks. Load / unload cargo and assist in warehouse operations as needed. All functions may require use of powered industrial trucks. Areas of Responsibility • Receives products from domestic and overseas vendors, transfers, customer returns, refused shipments, and non-inventory support products., • Accurately audits and verifies all incoming quantities for entry into computerized inventory., • Performs on and off-site warehousing duties to include: the initial movement of materials to appropriate locations, effective space utilization, and material retrieval delivery, using powered industrial equipment as needed., • Performs order fulfillment duties to include reviewing and prioritizing available orders, determining stock requirements, and maintaining levels of required inventory, physically picking, and packing orders, auditing, and verifying picked orders, preparing completed orders for shipping., • Transport finished goods and raw materials over land to and from manufacturing plants or retail and distribution centers., • Inspects vehicles for mechanical items and safety issues and perform preventative maintenance., • Plans routes and meet delivery schedules., • Documents and log work/rest periods and miles spent driving and retain fuel/toll receipts., • Complies with truck driving rules and regulations (size, weight, route designations, parking, and break periods) as well as with company policies and procedures., • Maneuvers trucks into loading or unloading positions., • Collects and verifies delivery instructions., • Reports defects, accidents, or violations, • Performs shipping duties to include Locating pallets to the dock, performing dock audits, verifying driver information, loading shipments on to trucks, properly filling out and signing BOL, packaging slips, and verifying documents are matched, tracking shipments., • Ensures safety and quality standards are consistently followed, complying with all DOT regulations., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times., • Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Responsible for maintaining and storing equipment, keys, refueling the truck, gas, expenses and to notify management of any breakdowns or maintenance issues., • All drivers must be familiar with and perform a daily pre trip and post trip inspection on their truck., • Maintains proper gowning and hygiene to ensure integrity of the product as per company policies., • Works extended hours and occasional weekend overtime., • Helps on the floor to assist Material Handlers and drive the forklift both sit down and stand up as needed, • Safety shoes are required to be worn for this position., • Works in a safe and responsible manner to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements. Education & Qualification: • High school graduate or GED equivalent, • 2+ years in distribution/warehousing, • Minimum of one (2) year work experience in nutritionals, supplements, food or pharmaceutical manufacturing industries preferred., • Proven work experience as a truck driver. Minimum 2+ years’ commercial driving experience or driving a box truck., • Must be able to pass a physical exam., • Hands-on experience with electronic equipment and software (GPS, AVL units, CB etc.), • Ability to drive long hours and travel regularly., • Extensive knowledge of applicable truck driving rules and regulations, • No recent moving or driving violations., • Adaptability and foresight to handle unexpected situations (traffic, weather conditions etc.), • Must pass CDL physical exam., • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards etc., • Mechanically inclined to understand the inner workings of equipment., • Demonstrates the ability to read and write basic English in order to be able to understand the industry regulated instruction sheets., • Prior forklift driving and ticketing experience needed., • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift., • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Work is regularly performed inside a manufacturing environment where temperatures can be Low, moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 1st - 7:30am to 4:00pm

Job Description Job Description Date 06/2025 Location 1300 Airport Road – Van Dyke Title Operator, Forklift Department Operations Reports to Manager, Warehouse FLSA (Exempt or Non-Exempt) Non-Exempt Role Overview The Forklift driver will perform all functions related to receipt of goods, put-away into warehouse, replenishment of pick areas, manual order processing, order auditing, shipment preparation, pallet building, truck loading and cycle counting inventory. All functions may require use of powered industrial trucks, SAP or RF as needed. Areas of Responsibility • Receives product from domestic and overseas vendors, transfers, customer returns, refused shipments, and non-inventory support products., • Accurately audits and verifies all incoming quantities for entry into computerized inventory., • Performs on and off-site warehousing duties to include: the initial movement of materials to appropriate locations, effective space utilization, and material retrieval delivery, using powered industrial equipment as needed., • Performs order fulfillment duties to include: reviewing and prioritizing available orders, determining stock requirements and maintaining levels of required inventory, physically picking and packing orders, auditing and verifying picked orders, preparing completed orders for shipping, using SAP and RF as needed., • Performs shipping duties to include: Locating pallets to the dock, performing dock audits, verifying driver information, loading shipments on to trucks, properly filling out and signing BOL, tracking shipments, using SAP and RF as needed., • Ensures safety and quality standards are consistently followed., • Performs sortation duties to include: lifting cartons at sortation, palletizing cartons, printing pallet tickets, moving freight to the dock, using SAP and RF as needed., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Handles start up and shut down duties pertaining to equipment at the beginning and end of each shift., • Maintains proper gowning and hygiene to ensure integrity of the product as per company policies., • Works extended hours and occasional weekend overtime., • Works in a safe and responsible manner in order to create an injury-free and incident-free workplace. Complies with all job-related safety and other training requirements. Education & Qualification: • High school graduate or GED equivalent, • 2+ years in distribution/warehousing, • Minimum of one (2) year work experience in nutritional’s, supplements, food or pharmaceutical manufacturing industries, • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards etc., • Mechanically inclined to understand inner workings of equipment., • Demonstrates the ability to read and write basic English in order to be able to understand the industry regulated instruction sheets., • Prior experience driving sit-down and stand-up PITs and ticketing experience helpful, • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on production floor a minimum of 6 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employee can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 2nd shift: 3:00PM - 11:30PM

Job DescriptionDescriptionA great place to work and grow, Naik Group is a dynamic, multi-discipline engineering company with offices in New York and New Jersey. Our continued growth in this highly competitive market is evidence of the trust and value clients place in our services’ quality and timeliness. Included in the full range of professional services we offer are Bridge/ Structural Design & Inspection, Highway/Roadway Engineering, Civil/Site Engineering, Traffic Engineering/ITS, Utility Engineering, Construction Management & Inspection, Design Build, Survey, Right of Way, and High Definition 3-D Laser Scanning. Our principals take considerable pride in their approach to the firm’s management, offering services like that of a large organization while demonstrating the personal client and consultant relationship of a small firm. Naik Consulting Group is currently seeking a Resident Engineer with a professional engineer license or NICET Level IV Certification to manage engineering and inspection activities for a bridge replacement project in New Jersey. Naik is a New York-New Jersey engineering services firm which specializes in engineering design, field inspection, and Project Management/Construction Management, primarily in the transportation infrastructure industry. Responsibilities • Manages and supervises an assigned field office typically consisting of inspectors, cost and schedule professionals, and office engineers., • Prepares inspectors’ daily work schedules to ensure site safety monitoring, technical oversight, and quality of construction., • Plans and coordinates inspection and construction management activities., • Works in the project office with senior management team., • Provides supervision of the field inspection teams working the various shifts., • Interfaces with multiple contractors to ensure coordination of construction activities., • Evaluates, resolves, and provides solutions to contractors and construction inspectors for constructability issues encountered at construction sites., • Acquires railroad and transit force account resources in a timely manner to meet aggressive project schedules and support the ongoing construction., • Develops and implements an effective schedule of values for payments, change order control and evaluation system., • Evaluates and validates contractor’s change order requests again contract documents., • Negotiates change orders and schedule impacts and makes recommendations to the Client., • Has knowledge and experience in performing inspection and resident engineering activities in active transit system environments, construction safety standards, operation requirements and force account support services., • Develops and implements Construction Management Plans including confirming progress, reviewing issues and actions, and ensuring quality and safety. Qualifications • Bachelor’s degree in engineering, Construction Management, or related field of study., • Minimum of 10 years of experience in resident engineering, construction management, project management, engineering, and related fields on major transportation/infrastructure projects., • Professional Engineer (PE) license or NICET Level IV Certification required., • Minimum of 3 years of experience on bridge replacement/rehabilitation projects (assigned full-time for the duration of the project., • NJDOT construction experience and familiarity with NJDOT Local Aid compliance requirements are mandatory, • ACI, TCC, NJSAT, and OSHA 10-hour certifications are required, • Excellent written and verbal communication skills, and presentation abilities in internal project settings with senior management team, external project stakeholders including senior client management leadership., • Excellent interpersonal skills, staff supervision, strong negotiation skills and conflict resolution abilities., • Strong problem-solving skills. BenefitsNaik offers a competitive compensation package including: • Holiday and paid-time-off programs, • 401(k) Plan and Match, • Career Path Development Program (Management & Technical Career Tracks), • Tuition Reimbursement, • Competitive health and dental insurance premiums, • Short-Term Disability/Long-Term Disability, • Life insurance, • Employee Assistant Program (EAP), • Flexible Spending Account, • and MoreNaik is a Drug and Alcohol-Free workplace, an Equal Employment Opportunity employer and E-Verify employer. We are committed to pay transparency and fairness in hiring. This posting complies with the Pay and Benefit Transparency Laws, which requires employers to disclose compensation and benefits information in all job advertisements.

Job Description Job Description Date 06/2025 Location 1300 Airport Road, New Brunswick, NJ Title Material Handler Department Warehouse Reports to Manager, Warehouse FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Material Handler will perform all functions related to receipt of goods, put-away into warehouse, replenishment of pick areas, manual order processing, order auditing, shipment preparation, pallet building, truck loading and cycle counting inventory. Responsible for transporting goods from one place to another using heavy or tractor-trailer trucks. Load / unload cargo and assist in warehouse operations as needed. All functions may require use of powered industrial trucks, SAP or RF as needed. It’s a floater position between different locations. Areas of Responsibility • Receives product from domestic and overseas vendors, transfers, customer returns, refused shipments, and non-inventory support products., • Performs order fulfillment duties to include reviewing and prioritizing available orders, determining stock requirements and maintaining levels of required inventory, physically picking and packing orders, auditing and verifying picked orders, preparing completed orders for shipping, using SAP and RF as needed., • Performs shipping duties to include: Locating pallets to the dock, performing dock audits, verifying driver information, loading shipments on to trucks, properly filling out and signing BOL, tracking shipments, using SAP and RF as needed., • Transport finished goods and raw materials over land to and from manufacturing plants or retail and distribution centers., • Inspect vehicles for mechanical items and safety issues and perform preventative maintenance., • Report defects, accidents, or violations., • Plan routes and meet delivery schedules. Collect and verify delivery instructions., • Document and log work/rest periods and miles spent driving and retain fuel/toll receipts., • Comply with truck driving rules and regulations (size, weight, route designations, parking, and break periods) as well as with company policies and procedures., • Maneuver trucks into loading or unloading positions, • Responsible for maintaining and storing equipment, keys, refueling the truck, gas, expenses and to notify management of any breakdowns or maintenance issues., • Ensure safety and quality standards are consistently followed., • Responsible for maintaining and storing equipment, keys, refueling the truck, gas, expenses and to notify management of any breakdowns or maintenance issues., • All drivers must be familiar with and perform a daily pre trip and post trip inspection on their truck., • Performs shipping duties to include: Locating pallets to the dock, performing dock audits, verifying driver information, loading shipments on to trucks, properly filling out and signing BOL, packaging slips and verifying documents are matched, tracking shipments, using SAP and RF as needed., • Ensure safety and quality standards are consistently followed, comply with all DOT regulations., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOPs at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Maintain proper gowning and hygiene to ensure integrity of the product as per company policies., • Works extended hours and occasional weekend overtime., • Works in a safe and responsible manner to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements. Education & Qualification: • High school graduate or GED equivalent, • 2+ years in distribution/warehousing, • Proven work experience as a truck driver. Minimum 2+ years’ commercial driving experience or driving a box truck, • Extensive knowledge of applicable truck driving rules and regulations, • Valid truck driving license and no recent moving or driving violations, • Ability to drive long hours and travel regularly, • Extensive knowledge of applicable truck driving rules and regulations, • Adaptability and foresight to handle unexpected situations (traffic, weather conditions etc.), • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards etc., • Mechanically inclined to understand inner workings of equipment., • Demonstrates the ability to read and write basic English in order to be able to understand the industry regulated instruction sheets., • Must have ability to lift heavy items up to 70 pounds. Must be able to load and unload heavy objects in and out of vehicle, requiring upper body strength and physical stamina., • Work is regularly performed in a truck cab with exposure to hot and cold weather and driving conditions influenced by rain and snow. Employees are exposed to environmental odors, noise, and fumes, etc. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 2nd shift: 3:00 PM - 11:00 PM

Job Description Position Summary The Universal Banker position is responsible for demonstrating excellent customer service in accordance with the Bank's Core Values and to maintain a well-developed working knowledge of the Bank's products & services. This includes an ethical approach to uncovering client needs and recommending appropriate products, services, and solutions to meet the client's short-term and long-term financial goals. The Universal Banker will be responsible for opening accounts, handling transactions, selling/cross-selling bank products and services as well as resolving simple and complex customer service issues. Individuals must be a self-starter and goal oriented with a passion to succeed. Essential Functions • Identifies, develops, and closes sales; applies needs based selling techniques to generate product interest; actively cross-sells products/services., • Actively engage in meaningful conversation with customers in order to seek a thorough understanding of their complete financial needs. Recommend products and services to support the customer's needs, through in person efforts, referrals to other lines of business, and marketing campaign outreach., • Serves as digital expert with the ability to demonstrate above average knowledge of all digital channels in an effort to cross sell and expand existing relationships., • Drives proactive sales and service conversations through inbound and outbound interactions., • Deepens existing customer relationships through a variety of proactive sales and service initiatives which should be captured in 360 View., • Actively participates in all branch activities, including but not limited to Huddles, Retail Calls and Sales meetings., • Meet customers' needs by conducting accurate needs assessments, providing information on products and services, informing customers on how to conduct their banking business, and delivering customer service that meets established quality standards., • Process customer transactions such as deposits, withdrawals, transfers, wires and payments, accurately and efficiently, • Count, organize, and safeguard cash and other negotiable bank items., • Assist customers with inquiries and solve problems in a professional and courteous manner., • Perform daily branch operations such as proving cash draw and branch vault, scanning teller work, and filing paperwork., • Open new accounts ensuring all required documentation is obtained and is accurate., • Comply with all established policies and procedures., • Maintain technical and professional knowledge by attending educational workshops and training, reviewing bank policies and procedures, keeping informed of updates and upgrades to products and services, and staying informed of any legal, policy, and procedural changes relating to retail banking., • Comply with BSA/KYC policies and procedures to mitigate risk and reduce/eliminate fraudulent transactions, • Completes transactions accurately and ensure the safety of the bank, • Travel required for meetings, community involvement and assistance covering local branches., • High School Diploma or equivalent with at least 3-5 years of comparable Retail experience., • College degree preferred, not required., • Prior cash handling or customer service experience, • Must be extremely organized and detail, • Must work well in a fast-paced, team environment., • Excellent communication skills, both written and verbal, are, • Excellent computer skills in a Microsoft Windows environment including proficiency in Word, Excel and Outlook are required., • Ability to sit for long periods of time up to 75% of work hours., • Ability to use hands to grasp, handle or feel., • Ability to use computer keyboard and system to enter data and process information., • Ability to read a computer screen at a close distance., • Ability to communicate, hear, and see., • Ability to use telephone to communicate with others., • It is the responsibility of each bank staff member and of management to adhere to policies and procedures designed to implement compliance with the laws and regulations to which the bank is subject. Each bank staff and management member shall be accountable for understanding how compliance with laws and regulations affects the performance of their day-to-day duties, for completing compliance training as assigned and for carrying out those duties in a manner to achieve compliance with those laws and regulations. All qualified applicants will receive consideration for employment without regard to race, color, age, religion, gender, sexual orientation, gender identity, national origin, protected veteran status or disability. This job description is not an employment agreement or contract, implied or otherwise. Unity Bank maintains "at will" employment. This document describes the position currently available. It is intended to convey information essential to understanding the scope of the position and is not an exhaustive list of skills, efforts, duties, responsibilities, or working conditions associated with it. Unity Bank reserves the right to modify duties or job descriptions at any time. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities at any time. Individuals may perform other duties as assigned, including work in other functional areas to cover absences or relief, to equalize peak work periods, or otherwise balance the workload. Unity Bank is committed to the principles of equal employment opportunity and prohibits discrimination in hiring, promotion and terms and conditions of employment on the basis of race, creed, color, national origin/nationality, ancestry, religion/religious practices or observances, age, sex, gender identity or expression, affectional or sexual orientation, marital status, civil union status, domestic partnership status, disability or perceived disability, atypical hereditary cellular or blood trait, genetic information, and status as a veteran or disabled veteran of, or liability for service in, the Armed Forces of the United States. Unity Bank commits to making reasonable accommodation to the known physical or mental limitations of qualified individuals with disabilities and qualified disabled veterans provided the individual is able to perform the essential functions of the job, unless such accommodation would impose an undue hardship upon Unity Bank. A qualified employee or job applicant with a disability may request a reasonable accommodation by contacting Unity Bank's human resources department.

Job Description Position Summary The Universal Banker position is responsible for demonstrating excellent customer service in accordance with the Bank's Core Values and to maintain a well-developed working knowledge of the Bank's products & services. This includes an ethical approach to uncovering client needs and recommending appropriate products, services, and solutions to meet the client's short-term and long-term financial goals. The Universal Banker will be responsible for opening accounts, handling transactions, selling/cross-selling bank products and services as well as resolving simple and complex customer service issues. Individuals must be a self-starter and goal oriented with a passion to succeed. Essential Functions • Identifies, develops, and closes sales; applies needs based selling techniques to generate product interest; actively cross-sells products/services., • Actively engage in meaningful conversation with customers in order to seek a thorough understanding of their complete financial needs. Recommend products and services to support the customer's needs, through in person efforts, referrals to other lines of business, and marketing campaign outreach., • Serves as digital expert with the ability to demonstrate above average knowledge of all digital channels in an effort to cross sell and expand existing relationships., • Drives proactive sales and service conversations through inbound and outbound interactions., • Deepens existing customer relationships through a variety of proactive sales and service initiatives which should be captured in 360 View., • Actively participates in all branch activities, including but not limited to Huddles, Retail Calls and Sales meetings., • Meet customers' needs by conducting accurate needs assessments, providing information on products and services, informing customers on how to conduct their banking business, and delivering customer service that meets established quality standards., • Process customer transactions such as deposits, withdrawals, transfers, wires and payments, accurately and efficiently, • Count, organize, and safeguard cash and other negotiable bank items., • Assist customers with inquiries and solve problems in a professional and courteous manner., • Perform daily branch operations such as proving cash draw and branch vault, scanning teller work, and filing paperwork., • Open new accounts ensuring all required documentation is obtained and is accurate., • Comply with all established policies and procedures., • Maintain technical and professional knowledge by attending educational workshops and training, reviewing bank policies and procedures, keeping informed of updates and upgrades to products and services, and staying informed of any legal, policy, and procedural changes relating to retail banking., • Comply with BSA/KYC policies and procedures to mitigate risk and reduce/eliminate fraudulent transactions, • Completes transactions accurately and ensure the safety of the bank, • Travel required for meetings, community involvement and assistance covering local branches., • High School Diploma or equivalent with at least 3-5 years of comparable Retail experience., • College degree preferred, not required., • Prior cash handling or customer service experience, • Must be extremely organized and detail, • Must work well in a fast-paced, team environment., • Excellent communication skills, both written and verbal, are, • Excellent computer skills in a Microsoft Windows environment including proficiency in Word, Excel and Outlook are required., • Ability to sit for long periods of time up to 75% of work hours., • Ability to use hands to grasp, handle or feel., • Ability to use computer keyboard and system to enter data and process information., • Ability to read a computer screen at a close distance., • Ability to communicate, hear, and see., • Ability to use telephone to communicate with others., • It is the responsibility of each bank staff member and of management to adhere to policies and procedures designed to implement compliance with the laws and regulations to which the bank is subject. Each bank staff and management member shall be accountable for understanding how compliance with laws and regulations affects the performance of their day-to-day duties, for completing compliance training as assigned and for carrying out those duties in a manner to achieve compliance with those laws and regulations. All qualified applicants will receive consideration for employment without regard to race, color, age, religion, gender, sexual orientation, gender identity, national origin, protected veteran status or disability. This job description is not an employment agreement or contract, implied or otherwise. Unity Bank maintains "at will" employment. This document describes the position currently available. It is intended to convey information essential to understanding the scope of the position and is not an exhaustive list of skills, efforts, duties, responsibilities, or working conditions associated with it. Unity Bank reserves the right to modify duties or job descriptions at any time. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities at any time. Individuals may perform other duties as assigned, including work in other functional areas to cover absences or relief, to equalize peak work periods, or otherwise balance the workload. Unity Bank is committed to the principles of equal employment opportunity and prohibits discrimination in hiring, promotion and terms and conditions of employment on the basis of race, creed, color, national origin/nationality, ancestry, religion/religious practices or observances, age, sex, gender identity or expression, affectional or sexual orientation, marital status, civil union status, domestic partnership status, disability or perceived disability, atypical hereditary cellular or blood trait, genetic information, and status as a veteran or disabled veteran of, or liability for service in, the Armed Forces of the United States. Unity Bank commits to making reasonable accommodation to the known physical or mental limitations of qualified individuals with disabilities and qualified disabled veterans provided the individual is able to perform the essential functions of the job, unless such accommodation would impose an undue hardship upon Unity Bank. A qualified employee or job applicant with a disability may request a reasonable accommodation by contacting Unity Bank's human resources department.

Job Description Job Description Date 06/25 Location 1300 Airport Road, North Brunswick NJ Title Operator, Tablet Coating 1 Department Standard Manufacturing Reports to Supervisor, Production FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Tablet Coating Operator is responsible for the operation and set-up of compression machines in accordance with company standard operating procedures (SOPs) and cGMP regulations to ensure products meet applicable quality standards. This position includes set-up, operation, cleaning, and light mechanical adjustments. The Coating Operator is accountable for overall process performance including safety, quality, shrink, attainment, and efficiency. Operators must be capable of operating multiple like machines at one time and learning to operate a variety of equipment within the manufacturing area. Areas of Responsibility Level 1 • Manufacture Production batches according to Batch Records, SOP’s, and cGMP guidelines to ensure product specifications and tolerances are met., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Check spray nozzles, piping, air pressure and boiler before start of the batch., • Observes machines gauges and equipment calibration status and reports any deviations to production supervisor., • Capable of running the following pieces of equipment/activity, • Accela Coater – 48” & 60”, • Coating medium/solution preparation, • Responsible for proper data entry in all batch record and logbook; and in process check control during coating process., • Perform all related materials handling pertaining to the products being coated., • Checks and verifies weight of tablets received from compression and reports deviations., • Correctly document all steps on batch record., • Adhere to all company policies., • Maintain proper gowning and hygiene to ensure integrity of the product as per cGMP’s and company policies., • Perform cleaning of equipment and processing room and dispose of rejected tablet and powder as per compliance requirements., • Knowledgeable in the relationship between spray rate, and inlet temperature, atomizing pressure, bed temperature, pan speed, and gun to bed distance., • Meets all safety expectations and follows all safety practices., • Works extended hours and occasional weekend overtime., • Manufacture Production batches according to Batch Records, SOP’s, and cGMP guidelines to ensure product specifications and tolerances are met., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Check spray nozzles, piping, air pressure and boiler before start of the batch., • Observes machines gauges and equipment calibration status and reports any deviations to production supervisor., • Capable of running the following pieces of equipment/activity as well as train on new equipment, including troubleshooting equipment and accessories:, • Accela Coater – 48” & 60”, • Coating medium/solution preparation, • Utilizes problem-solving skills to investigate and troubleshoot product issues and recommend solutions for: 1) coating issues such as sticking twinning, orange peel, film peel, blistering, surface edge erosion and over - wetting 2) general issues such as coating pan set up, performance, documentation, and material issues., • Responsible for proper data entry in all batch record and logbook; and in process check control during coating process., • Perform all related materials handling pertaining to the products being coated., • Checks and verifies weight of tablets received from compression and reports deviations., • Assist in the investigation of batch record deviations., • Correctly document all steps on batch record., • Adhere to all company policies., • Maintain proper gowning and hygiene to ensure integrity of the product as per cGMP’s and company policies., • Perform cleaning of equipment and processing room and dispose of rejected tablet and powder as per compliance requirements., • Knowledgeable in the relationship between spray rate, and inlet temperature, atomizing pressure, bed temperature, pan speed, and gun to bed distance., • Meets all safety expectations and follows all safety practices., • Works extended hours and occasional weekend overtime., • Manufacture Production batches according to Batch Records, SOP’s, and cGMP guidelines to ensure product specifications and tolerances are met., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Check spray nozzles, piping, air pressure and boiler before start of the batch., • Observes machines gauges and equipment calibration status and reports any deviations to production supervisor., • Capable of running the following pieces of equipment/activity as well as train on new equipment, including troubleshooting equipment and accessories:, • Accela Coater – 48” & 60”, • Coating medium/solution preparation, • Assist in the revision and creation of department SOP’s., • Utilizes problem-solving skills to investigate and troubleshoot product issues and recommend solutions for: 1) coating issues such as sticking twinning, orange peel, film peel, blistering, surface edge erosion and over - wetting 2) general issues such as coating pan set up, performance, documentation, and material issues., • Responsible for proper data entry in all batch record and logbook; and in process check control during coating process., • Perform all related materials handling pertaining to the products being coated., • Checks and verifies weight of tablets received from compression and reports deviations., • Assist in the investigation of batch record deviations., • Correctly document all steps on batch record., • Adhere to all company policies., • Maintain proper gowning and hygiene to ensure integrity of the product as per cGMP’s and company policies., • Perform cleaning of equipment and processing room and dispose of rejected tablet and powder as per compliance requirements., • Knowledgeable in the relationship between spray rate, and inlet temperature, atomizing pressure, bed temperature, pan speed, and gun to bed distance., • Meets all safety expectations and follows all safety practices., • Works extended hours and occasional weekend overtime., • Works in a safe and responsible manner to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements. Education & Qualification: Level 1 Pay Rate: $21.00 - $25.00 • High school graduate or GED equivalent Pay Rate: $23.00 - $28.00 • High school graduate or GED equivalent, • 2-4 years of experience, • Operate 2 machines at one time, • A clear understanding of the principal coating pan operation. Pay Rate: $28.00 - $38.00 • High school graduate or GED equivalent, • 5+ years of experience, • Operate all machines., • Solution prep, able to coat / troubleshoot the problems for all products., • A thorough understanding of the causes and prevention of common coating problems., • Responsible for training, • N/A Skills & Ability • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards, etc., • Mechanically inclined to understand the inner workings of the equipment., • Demonstrates the ability to read and write basic English to be able to understand the industry-regulated instruction sheets., • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 2nd shift: 3:15 PM - 11:45 PM

Job Description Job Title: Treatment Plan Coordinator Department: Operations Reports to: Office Manager FLSA Status: Non-Exempt Company Overview ProSmile is one of the fastest-growing dental organizations, with a vast network of multi-specialty practices across New Jersey, Pennsylvania, Virginia, Michigan, Illinois, Wisconsin, Indiana, Washington D.C., and Maryland. Our practices are led by top-tier dentists who are committed to providing exceptional patient care while offering a supportive environment for dental professionals to thrive. We focus on delivering personalized, gentle care to our patients and creating a collaborative workplace with opportunities for mentorship, growth, and ongoing training. Position Summary ProSmile is seeking to hire a Treatment Plan Coordinator who is customer focused, compassionate, and dedicated to facilitating solutions to patient’s dental health needs. This Treatment Plan Coordinator will work in a growing practice with a great team that makes coming to work engaging and supportive. We offer training to those who are looking for a career with growth potential and the opportunity to fulfill our mission to provide quality affordable dental care to our patients. Duties and Responsibilities • Internalize the role of patient concierge, build trust by demonstrating the attitude of care and service, • Make welcome calls to all new patients, answer initial questions, set and manage expectations for the first visit, • Proactively receive patients on their first visit, assist with new patient paperwork and welcome packets, and ensure smooth patient flow throughout the visit, • Present and explain all treatment plans involving out of pocket costs to patients, • Continuously assist patients in offering (payment plans including) Care Credit payment options. Ensure effective communication when explaining financial options. Take ownership for all treatment, payment, and appointment related needs and inquiries from patients in person and over the phone, • Check patients in and out, schedule and confirm patient appointments, and handle patient paperwork including patient charts, referrals, appointment cards, and welcome packets, etc., • Maintain control of all patient payments and insurance statements; reinforce the office financial policy and ensure payments are current., • Preparing financial treatment plans and presenting to patient. Coordinate financial arrangements with the patients offering payment options, • Assist in identifying, alerting front desk, and collecting previous balances and current copays, • Performs miscellaneous job-related as assignedQualifications:, • Dental Experience required, • Excellent written and oral communication skills, • Computer competent and ability to work a multi-line phone system, • Professional and compassionate demeanor, • Enthusiastic and outgoing personality, • Willingness to go above and beyond to ensure patient satisfaction Benefits Summary At ProSmile, we are committed to supporting the health and well-being of our employees and their families. We offer the following benefits for Full Time Benefits Eligible Positions (35+ hours per week) and Part Time Benefits Eligible Positions (30-35 hours per week): • Medical Insurance: Choice of five comprehensive Aetna medical plans, including options with low copays, deductible-sharing, and national provider networks., • Dental Insurance: MetLife plans offering preventative, basic, major, and orthodontic coverage options., • Vision Insurance: Davis and UHC vision plans with annual exams, eyewear allowances, and contact lens benefits., • Flexible Spending & Health Savings Accounts: Pre-tax savings accounts for medical, dependent care, and healthcare expenses., • Life & Disability Insurance: Employer-paid basic life and AD&D insurance, with voluntary life, short-term, and long-term disability plans., • Additional Perks:, • Employee Assistance Program (EAP), • Identity Theft & Fraud Protection, • Legal Support Services, • Discount Programs (including pet insurance, travel, theme parks, electronics, etc.), • Wellness Programs The Company reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between the Company and the employee. Equal Employment Our culture encourages individual development, embraces an inclusive environment, rewards innovative excellence, and leads in provider and patient satisfaction. Prosmile values diversity, inclusion, and equity as matters of fairness and effectiveness. We are committed to hiring and retaining a staff that reflects the diversity of the communities we serve, fostering an inclusive working environment where staff of all backgrounds feel welcomed and engaged. ProSmile is an Equal Opportunity Employer and encourages applications from individuals underrepresented in the medical sector, including people of color, and persons with non-traditional work and educational experience. All who believe they meet the stated qualifications are invited to apply. Company Safety We believe that the best care for our patients starts with the best care for our employees. ProSmile is committed to proactively creating and maintaining an environment that is safe for our team and patients. Employees are required to wear Personal Protective Equipment (PPE) including face masks, gloves, gowns, and more as needed and in accordance with CDC standards. Powered by JazzHR IFCC9ZFH3A

Job Description Job Title: Front Desk Department: Operations Reports to: Office Manager FLSA Status: Non-Exempt Company Overview ProSmile is one of the fastest-growing dental organizations, with a vast network of multi-specialty practices across New Jersey, Pennsylvania, Virginia, Michigan, Illinois, Wisconsin, Indiana, Washington D.C., and Maryland. Our practices are led by top-tier dentists who are committed to providing exceptional patient care while offering a supportive environment for dental professionals to thrive. We focus on delivering personalized, gentle care to our patients and creating a collaborative workplace with opportunities for mentorship, growth, and ongoing training. Position Summary ProSmile is in search of an energetic, motivated, and organized Dental Receptionist with a positive attitude who is looking for growth and development in their field, and the opportunity to ascend in a growing organization that puts the care of its patients and the satisfaction of its employees first. If building your career as a Dental Receptionist interests you, and you want to work in an enjoyable and fun environment that promotes learning and teamwork, look no further. Duties and Responsibilities • Front Desk Receptionists are the first point of contact with our patients and should always be friendly and attentive to their needs in a timely manner, • Front desk coordination of patient flow and financial activities such as scheduling, handling patient paperwork, collecting payments and insurance cards, • Maintains reception area and inventory control of office supplies, patient literature and all related items., • High School diploma or GED preferred, • Professional and compassionate demeanor, • Willingness to go above and beyond to ensure patient satisfaction, • Excellent interpersonal skills and communications abilities, • Impressive ability to efficiently manage multiple tasks, • Computer competent and ability to work a multi-line phone system Benefits Summary At ProSmile, we are committed to supporting the health and well-being of our employees and their families. We offer the following benefits for Full Time Benefits Eligible Positions (35+ hours per week) and Part Time Benefits Eligible Positions (30-35 hours per week): • Medical Insurance: Choice of five comprehensive Aetna medical plans, including options with low copays, deductible-sharing, and national provider networks., • Dental Insurance: MetLife plans offering preventative, basic, major, and orthodontic coverage options., • Vision Insurance: Davis and UHC vision plans with annual exams, eyewear allowances, and contact lens benefits., • Flexible Spending & Health Savings Accounts: Pre-tax savings accounts for medical, dependent care, and healthcare expenses., • Life & Disability Insurance: Employer-paid basic life and AD&D insurance, with voluntary life, short-term, and long-term disability plans., • Additional Perks:, • Employee Assistance Program (EAP), • Identity Theft & Fraud Protection, • Legal Support Services, • Discount Programs (including pet insurance, travel, theme parks, electronics, etc.), • Wellness Programs The Company reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between the Company and the employee. Equal Employment Our culture encourages individual development, embraces an inclusive environment, rewards innovative excellence, and leads in provider and patient satisfaction. Prosmile values diversity, inclusion, and equity as matters of fairness and effectiveness. We are committed to hiring and retaining a staff that reflects the diversity of the communities we serve, fostering an inclusive working environment where staff of all backgrounds feel welcomed and engaged. ProSmile is an Equal Opportunity Employer and encourages applications from individuals underrepresented in the medical sector, including people of color, and persons with non-traditional work and educational experience. All who believe they meet the stated qualifications are invited to apply. Company Safety We believe that the best care for our patients starts with the best care for our employees. ProSmile is committed to proactively creating and maintaining an environment that is safe for our team and patients. Employees are required to wear Personal Protective Equipment (PPE) including face masks, gloves, gowns, and more as needed and in accordance with CDC standards. Powered by JazzHR MzjiFLkVv1

Job Description Job Description Date 06/2025 Location 1300 Airport Road, North Brunswick NJ Title Operator, Granulation/ Blending Department Standard Manufacturing Reports to Production, Supervisor FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Granulation/Blending Operator is responsible for the operation and set up of granulators, drying oven, blenders, screening equipment etc. in accordance with company standard operating procedures. The position includes set up, operation, cleaning, and preventative maintenance of all related equipment. The Operator is accountable for overall performance including safety, quality, shrink, attainment, and production efficiency. Operators must be capable of operating multiple like machines at one time and learning to operate a variety of equipment within the manufacturing area. Areas of Responsibility • Follow batch records, SOP’s, and cGMP's guidelines to ensure product specifications and tolerances are met., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Complete all labeling and inventory movements to ensure accurate inventory control., • Dismantle and clean any accessories and equipment while also maintaining a clean work area., • Train in the operation, cleaning and set-up of the following pieces of equipment as well as new equipment:, • Rapid Mixer Granulator: 100L & 600L and planetary mixer, • Fluid bed dryer/processor, • Tray Drying Ovens, • Fitz mill/Multi mill, • Double cone/V- blenders: 6cu. ft. to 150 cu. ft., • Screening/ sieving equipment, • Fill in appropriate logbooks for equipment and rooms., • Perform all material handling of products and components., • Correctly document all steps on batch record., • Participate in any investigation for a deviation involving a batch record., • Maintain proper gowning and hygiene to ensure integrity of the product as per company policies., • Works extended hours and occasional weekend overtime. Education & Qualification: Level 1 Pay Rate $19.00 - $22.00 • High school graduate or GED equivalent, • 3+ years Granulating/Blending Operator experience, • Minimum of one (1) year work experience in nutritionals, supplements, food, or pharmaceutical manufacturing industries, • 6-12 months experience, • Operates blending, screening & milling machines., • High school graduate or GED equivalent, • 3+ years Granulating/Blending Operator experience, • Minimum of one (1) year work experience in nutritionals, supplements, food, or pharmaceutical manufacturing industries, • 1 years of experience, • Operates 5 machines (blending, milling, sifting, tray dryer and granulation)., • A clear understanding of the principal functions of the blending /granulation department. Certified forklift operator., • High school graduate or GED equivalent, • 3+ years of experience, • Operate all machines., • Must be highly skilled in the proper set up an operation of blenders and granulators., • N/A Skills & Ability • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards etc., • Mechanically inclined to understand the inner workings of equipment., • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift., • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Must be able to wear all PPE including a lab coat, face mask, booties, gloves, safety glasses/goggles, and respirators. Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment.

Job Description Job Description Date 06/2025 Location 1300 Airport Road, North Brunswick NJ Title Operator, Compression & Encapsulation Department Standard Manufacturing Reports to Production Supervisor FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Compression and Encapsulation Operator is responsible for the operation and set-up of tablet compression machines and set-up of automatic capsule filling machine in accordance with company standard operating procedures (SOPs) and cGMP regulations to ensure products meet applicable quality standards. This position includes set-up, operation, cleaning, and light mechanical adjustments. The Operator is accountable for overall production line performance including safety, quality, shrink, attainment, and line efficiency. Operators must be capable of operating multiple like machines at one time and learning to operate a variety of equipment within the manufacturing area. Areas of Responsibility Level 1 • Makes necessary machine adjustments to ensure the smooth operation of the lines for required quality and quantity., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Utilizes problem-solving skills to identify and report to the team lead or supervisor troubleshoot product issues., • Disassembles, cleans/ sanitizes, and reassembles all required equipment., • Meets all safety expectations and follows all safety practices., • Maintains proper gowning and hygiene to ensure integrity of the product as per cGMP’s and company policies., • Must be able to work extended work hours and weekend overtime., • Makes necessary machine adjustments to ensure the smooth operation of the lines for required quality and quantity., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Utilizes problem-solving skills to investigate and troubleshoot product issues and recommend solutions for: 1. tableting issues such as sticking and picking, capping, chipping, compressibility, delamination, disintegration, and black spots on surface, 2. general issues such as machine set-up, machine performance, and documentation. • Cross-trains in other areas to be able to support the manufacturing process as needed., • Disassembles, cleans/ sanitizes, and reassembles all required equipment., • Meets all safety expectations and follows all safety practices., • Maintains proper gowning and hygiene to ensure integrity of the product as per cGMP’s and company policies., • Must be able to work extended work hours and weekend overtime., • Makes necessary machine adjustments to ensure the smooth operation of the lines for required quality and quantity., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Assists supervisor in completion of deviation reports that outline both short- and long-term corrective action steps., • Utilizes problem-solving skills to investigate and troubleshoot product issues and recommend solutions for: 1. tableting issues such as sticking and picking, capping, chipping, compressibility, delamination, disintegration, and black spots on surface, 2. general issues such as machine set-up, machine performance, and documentation. • Performs basic and routine maintenance activities., • Cross-trains in other areas to be able to support the manufacturing process as needed., • Disassembles, cleans/ sanitizes, and reassembles all required equipment., • Meets all safety expectations and follows all safety practices., • Maintains proper gowning and hygiene to ensure integrity of the product as per cGMP’s and company policies., • Must be able to work extended work hours and weekend overtime., • Works in a safe and responsible manner to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements. Education & Qualification: Level 1 Pay Rate $19.00 - $23.00 • High school graduate or GED equivalent, • High school graduate or GED equivalent, • High school graduate or GED equivalent, • 5+ years of experience, • Operate all machines., • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely to detail and accuracy with numbers., • Understands and is knowledgeable of cGMP, OSHA standards etc., • Mechanically inclined to understand inner workings of equipment., • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 1st shift: 7:00 AM - 3:30 PM 2nd shift: 3:15 PM - 11:45 PM 3rd shift: 11:00 PM - 7:30 AM

Job Description Job Description Date 11/2020 Location 1300 Airport Road, North Brunswick NJ Title Production Operator Department Standard Manufacturing - Beads Reports to Production Supervisor FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Beads Operator is responsible for the operation and set up of mills, granulators, drying oven, blenders, screening equipment, fluid bed dryers, feeders, etc. in accordance with company standard operating procedures. The position includes set up, operation, cleaning, and preventative maintenance of all related equipment. The Operator is accountable for overall performance including safety, quality, shrink, attainment, and production efficiency. Operators must be capable of operating multiple like machines at one time and learning to operate a variety of equipment within the manufacturing area. Areas of Responsibility • Follows batch records, SOP’s, and cGMP's guidelines to ensure product specifications and tolerances are met., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Completes all labeling and inventory movements to ensure accurate inventory control., • Dismantles and cleans any accessories and equipment while also maintaining a clean work area., • Trains in the operation, cleaning and set-up of the following pieces of equipment as well as new equipment:, • Vector Fluid Bed Dryer, inserts, and ancillary equipment, • K-Tron powder feeder, • Air Classifying Mill, • Fitz mill/Multi mill, • Double cone/V- blenders: 6cu. ft. to 150 cu. ft., • Screens/ sieves equipment, • Fills in appropriate logbooks for equipment and rooms., • Performs all material handling of products and components., • Correctly document all steps on batch record., • Participates in any investigation for a deviation involving a batch record., • Maintains proper gowning and hygiene to ensure integrity of the product as per company policies., • Works extended hours and occasional weekend overtime., • Works in a safe and responsible manner to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements. Education & Qualification: • High school graduate or GED equivalent, • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards, etc., • Mechanically inclined to understand the inner workings of the equipment. Level 1 Pay Rate: $19.00 - $23.00 • 1-2 years experience, • Operates fluid bed dryer, blending, screening & milling machines. Pay Rate: $22.00 - $24.00 • 2-4 years’ experience plus responsibilities above, • Operates, cleans, sets all machines in work area., • A clear understanding of the principal functions of the bead department., • Completes batch card independently, follow SOP’s and GMP’s strictly Pay Rate: $24.00 - $27.00 • 5+ Years’ experience plus responsibilities above, • Operates, cleans, sets all machines in work area., • Must be highly skilled in the proper set up an operation of blenders and granulators., • Applies cGMP’s & completes batch card instructions accurately - able to train all activities in bead manufacturing department., • Ability to work with minimum to no supervision, • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 1st shift: 7:00 AM - 3:30 PM 2nd shift: 3:15 PM - 11:45 PM 3rd shift: 11:00 PM - 7:30 AM

Job DescriptionJob Title: Accounts Receivable/Cash Applications Location: Florham Park, NJ (100% on-site) Type: 4-month contract assignment Compensation: $27.00 - $30.00/hour Summary: LHH is working with an established professional services firm in Florham Park, NJ in their search for an Accounts Receivable / Cash Applications Specialist for a 4-month contract assignment covering a maternity leave. This role offers a stable, family-oriented environment with a collaborative team culture. Position Details * Location: Florham Park, NJ (on-site 5 days per week during training, then hybrid with 3 days on-site). * Schedule: Monday–Friday, 9:00 AM – 5:00 PM. * Reports To: Accounting Manager. * Duration: 4 months (maternity leave coverage). Responsibilities * Process daily cash receipts including checks, wires, and ACH payments. * Enter and apply payments to client invoices within the accounting system. * Maintain daily spreadsheets and prepare end-of-day cash reports for firm leadership. * Review and reconcile American Express statements on a monthly basis. * Support ad hoc accounting tasks with a focus on accuracy and timeliness. Requirements * Prior accounts receivable or cash applications experience preferred. * Strong attention to detail and accuracy in data entry. * Proficiency with Excel and ability to update daily spreadsheets. * Experience with Elite 3E or similar accounting software is a plus. * Ability to work independently and handle confidential financial information. Benefit offerings include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits, and 401K plan. Our program provides employees the flexibility to choose the type of coverage that meets their individual needs. Available paid leave may include Paid Sick Leave, where required by law; any other paid leave required by Federal, State, or local law; and Holiday pay upon meeting eligibility criteria. For immediate consideration, please email resumes to: Pay Details: $27.00 to $30.00 per hour Search managed by: Christine Senn Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. ]]>

Job Description Job Description Date 07/2019 Location 1300 Airport Road, North Brunswick NJ Title Line lead, Packaging Department Packaging Reports to Supervisor, Packaging FLSA (Exempt or Non-Exempt Exempt Role Overview The Packaging Lead is responsible for coordinating line workers’ activities to ensure their assigned packaging goals are met in compliance with all quality and safety SOPs and cGMP’s. The successful candidate will monitor, manage, and maintain equipment, operators, and processes to ensure compliance to GMP’s and safety standards. This is a working Lead role and will be required to support a station on the line. The ideal candidate will also have strong interpersonal, communication, teamwork, time management and organizational skills, will be highly motivated, self-directed, and accountable, and will have the ability to work effectively with all levels of staff across the organization. Areas of Responsibility • Coordinates with the supervisor and other Leads on an as needed basis to establish schedules, job assignments and packaging sequences to meet packaging goals., • Communicates with Supervisor to resolve employee issues and take appropriate action., • Must be available to attend training seminars/classes as needed., • Delivers and manages work assignments of packaging operators (both USPL and temporary agency)., • Coordinates break rotation schedules in a timely manner that complies with labor laws and maintains production flow., • Communicates all applicable line production information to the Supervisor in shift hand-off to ensure smooth transition., • Continually inspects raw materials and finished goods to ensure safe, quality nutritionals of the highest standard., • Continually monitors processes and finished goods to ensure all is within specification, so as to catch & resolve any error or malfunction as soon as possible and prevent waste., • Replenishs supplies, and ensure proper tools are available to operators to support efficient packaging., • Follows safety protocol to ensure that warehouse is accessible and safe for everyone., • Communicates any hazards, and/or pest sighting to appropriate department for a timely resolution., • Ensures all items on the line shadow boards are intact and accounted for., • Maintains proper gowning and hygiene to ensure integrity of the product as per cGMP’s and company policies., • Follows batch records, SOP’s, and cGMP’s guidelines to ensure product specifications and tolerances are met., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times., • Establishes and maintain effective relationship with employees, line leaders, supervisors, and senior managers to communicate effectively., • Provides clear direction and expectations for direct reports and assures that tasks and responsibilities are clear., • Develops employees that contribute to the daily success of the line and can be successful in the supervisor’s absence., • Identifies strengths and weaknesses of all associates on their team to ensure optimal performance; knows which employees they can assign additional tasks to, and which need closer scrutiny., • Responsible for ensuring each employee works in a safe and responsible manner in order to create an injury-free and incident-free workplace. Complies with all job-related safety and other training requirements., • Ensures all associates are trained and following all standard operating procedures., • Works extended hours and occasional weekend overtime. Education & Qualification: • High School Degree/GED and/or 2+ years Supervisory experience., • Able to follow packaging schedules and assign personnel to the packaging lines to ensure all SOP and cGMP’s are being followed., • Must have a thorough understanding of the cause and prevention of common packaging line problems., • Must be able to follow all instructions in batch cards and sign off as required., • Demonstrates ability to work in a team and assist others., • Bi-Lingual in Spanish or Hindi is a plus., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards etc., • Mechanically inclined to understand inner workings of equipment., • Able to lift up to 30 lbs.; occasionally lift and move up to 50 pounds., • Able to travel between warehouse/distribution facilities, to meet and support departments in the Company and its customers., • Able stand and walk a minimum of 6 hours per shift, • Uses hands to finger, handle or feel, or to operate or to control objects. Lifting to waist height and/or above shoulder height, frequent bending from waist, or squatting, walking short distances., • Able to occasionally work on a rolling ladder or step stool, or to lean over equipment as well as kneeling on the floor to clean under the equipment., • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 1st shift: 7:00 AM - 3:30 PM 2nd shift: 3:15 PM - 11:45 PM