Software simulation jobs in East Orange, New JerseyCreate job alerts

Job Description: What We're Doing As a part of the Lockheed Martin community, we take on challenges and find solutions using creativity and collaboration. If you’re looking to be a part of a passionate team solving these complex problems, then Rotary and Mission Systems is the place for you. The Work Lockheed Martin Rotary & Mission Systems is seeking a full-time Senior Radar Systems Engineer. In this role, you will lead the design, analysis, testing, and requirements development and verification of high performance Radar Signal Simulation and Processing systems. The successful candidate will have experience and/or knowledge of Radar Signal Simulation & Processing, MATLAB Simulation Development, Requirements Development and Testing and Model Based System Engineering. This position is located at a facility that requires special access and will require a government security clearance. U.S. Citizenship is required. #REAS Qualifications: • Bachelor's degree in Electrical or Computer Engineering or equivalent technical discipline, • Five or more years of Systems Engineering experience, • Experience developing system and software requirements and associated analysis and testing, • Ability to obtain & maintain a DoD Security Clearance at the SECRET level. U.S. Citizenship is required.

Job Description: WHAT WE'RE DOING As a part of the Lockheed Martin community, we take on challenges and find solutions using creativity and collaboration. If you’re looking to be a part of a passionate team solving these complex problems, then Rotary and Mission Systems is the place for you. By bringing together people that use their passion for purposeful innovation, at Lockheed Martin we keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide diverse career opportunities designed to propel development and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. At Lockheed Martin, we place an emphasis on empowering our employees by fostering innovation, integrity, and exemplifying the epitome of corporate responsibility. Your Mission is Ours. THE WORK Radar Systems Engineering within Rotary & Mission Systems (RMS) is seeking a candidate to support the design, integration, and test verification of high performance radar systems. The successful candidate will have strong analytic and communication skills, and work well in a dynamic, multi-disciplinary environment. The Radar Systems Engineer will: WHO WE ARE Lockheed Martin is a global aerospace, defense, and security company dedicated to advancing scientific discovery and harnessing innovation to make the world a safer place. Our RMS business in Camden, NJ is a hub of talented engineers, scientists, and professionals committed to shaping the future of defense technology. We value collaboration, excellence, and integrity in everything we do. As a part of our team, you will work alongside like-minded individuals dedicated to pushing the boundaries of what's possible. Why Join Us Your Health, Your Wealth, Your Life Our flexible schedules, competitive pay and comprehensive benefits enable you to live a healthy, fulfilling life at and outside of work. Learn more about Lockheed Martin's comprehensive benefits package here! Explore some of the cutting‑edge technologies we support: ___ #buildradars #rmshotmiljobs #REAS Qualifications: • Bachelor’s degree or higher in Electrical Engineering, Systems Engineering, Computer Science/Engineering, Physics or related STEM degree with minimum 2 years' related experience., • Experience with C++ or equivalent object-oriented computing language, Matlab, and, scripting languages., • Demonstrated experience in two or more of the following areas: systems engineering, software and system analysis, requirements development, verification and validation, trade studies, modeling and simulation, or integration and test., • Ability to obtain and maintain a U.S. DoD security clearance at the SECRET level. U.S. Citizenship required.

Job Description: What We're Doing Here at Lockheed Martin Rotary and Mission Systems (RMS) we take on the biggest and baddest challenges in the world. We seek out innovative ideas and creative solutions to seemingly impossible problems facing our customers in the Integrated Warfare Systems & Sensors (IWSS) organization. We collaborate with the best Radar engineers in the business across the Moorestown, NJ and Syracuse, NY sites to invent solutions where they don’t exist yet. We keep pushing the boundaries of Electronic Protection solutions to stay ahead of the adversary in the ever-evolving game of cat-and-mouse that is Electronic Warfare. If you’re looking for the challenge of a lifetime on a team of the brightest minds in the world, then Rotary Mission Systems and the Electronic Protection team is the place for you. If you’re looking for life-long learning and a career where the hard work is the fun part, then you’re in the right place. Lockheed Martin. Your Mission is Ours. The Work In your role as a Senior Systems Engineer – Radar Electronic Protection, you will: • Develop models and/or detailed simulations to support system design evaluation., • Conduct data analysis to assess system performance., • Write verification plans and test procedures showing traceability to system and software specifications., • Support integration and test, evaluate test results, investigate discrepancies, provide technical assessment of anomalies, and drive issues to resolution., • Conduct system verification and support certification activities., • Participate in landmark reviews of Radar System products with internal and external customers, program and senior leadership, and multi-disciplinary engineering teams., • Mentor junior engineers and share knowledge of Electronic Protection concepts. Who We Are Our Electronic Protection team of systems engineers and sensor architects all working together to deliver quality designs and cutting-edge capabilities to our customers. We support a broad array of Radar products and customers including the Missile Defense Agency, US Navy, Air Force, US Army, Space Force, and foreign partners including Japan, Canada, Spain, Norway, Australia, UK and more. Radar at Lockheed Martin Who you are If you enjoy a technical challenge that will get you thinking outside the box. If you seek a collaborative environment working with other motivated engineers. If you like getting your hands dirty in architecting new designs, digging into the nuances of algorithm performance, developing novel models, supporting live testing of tactical systems, or anything in between. If you’re ready to take on the complexities of an ever-evolving adversary driving new Electronic Protection designs, then this is the place for you. Why Join Us At Lockheed Martin we value your unique skills and expertise, and we aim to give back continuously by offering a wide variety of benefits and amenities to help our employees live flexible, healthy, and fulfilling lives at and outside of work. Some of our favorite perks include: Learn more about Lockheed Martin's comprehensive benefits package here! Explore some of the cutting‑edge technologies we support: ___ #REAS Qualifications: • Bachelor’s degree or higher in Electrical Engineering, Computer Science/Engineering, Physics or equivalent combined with 5 years of related experience., • Functional knowledge of Radar Systems., • Demonstrated experience in one or more of the following areas: system analysis, architecture, requirements development, trade studies, modeling and simulation, or integration and test., • High proficiency in C++ or Matlab or Python., • U.S. Citizen with ability to obtain or maintain a DoD Secret level clearance.

Job Description: As a part of the Lockheed Martin community, we take on challenges and find solutions using creativity and collaboration. If you’re looking to be a part of a passionate team solving these complex problems, then Rotary and Mission Systems is the place for you. By bringing together people that use their passion for purposeful innovation, at Lockheed Martin we keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide diverse career opportunities designed to propel development and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. At Lockheed Martin, we place an emphasis on empowering our employees by fostering innovation, integrity, and exemplifying the epitome of corporate responsibility. Your Mission is Ours. The Work Radar Systems Engineering within Rotary & Mission Systems (RMS) is seeking a candidate to support the design, integration, and test verification of high performance radar systems. The successful candidate will have strong analytic and communication skills, and work well in a dynamic, multi-disciplinary environment. The Radar Systems Engineer will: Who We Are Lockheed Martin is a global aerospace, defense, and security company dedicated to advancing scientific discovery and harnessing innovation to make the world a safer place. Our RMS business in Camden, NJ is a hub of talented engineers, scientists, and professionals committed to shaping the future of defense technology. We value collaboration, excellence, and integrity in everything we do. As a part of our team, you will work alongside like-minded individuals dedicated to pushing the boundaries of what's possible. Learn more about IWSS Why Join Us Your Health, Your Wealth, Your Life Our flexible schedules, competitive pay and comprehensive benefits enable you to live a healthy, fulfilling life at and outside of work. Learn more about Lockheed Martin's comprehensive benefits package here! Explore some of the cutting‑edge technologies we support: ___ #buildradars #rmshotmiljobs #REAS Qualifications: • Bachelor’s degree or higher in Electrical Engineering, Systems Engineering, Computer Science/Engineering, Physics or related STEM degree with minimum 5 years' related experience., • High proficiency in C++ or equivalent object-oriented computing language, Matlab, and, scripting languages., • Demonstrated experience in two or more of the following areas: systems engineering, software and system analysis, requirements development, verification and validation, trade studies, modeling and simulation, or integration and test., • Experience working with customers to drive complex technical issues/challenges to closure., • Ability to obtain and maintain a U.S. DoD security clearance at the SECRET level. U.S. Citizenship required.

Principal Quant Developer The Role The Quantitative Research & Investing Technology (QRIT) team within Fidelity's Asset Management Technology group is seeking a highly motivated and curious Principal Quantitative Developer. In this role you will contribute to a dynamic and fast-paced development team supporting researchers in prototyping and delivering new systematic investment strategies. You will provide high impact solutions on various projects including alpha research, portfolio construction, and risk management. Your technology knowledge covers a broad spectrum of technologies, including R, Python, and PL/SQL databases, positioning you as a full-stack software engineer who capitalizes on enterprise technology. You are committed to constructing high-quality, scalable, robust, resilient and efficient analytical and software solutions that propel investment processes forward. You will possess: • A Bachelor's degree in Computer Science, Financial Engineering, Information Technology, Information Systems, Mathematics, Physics, Statistics, Engineering, or a closely related field and six (6) years of experience as a Senior Quant Developer or similar role., • Alternatively, a Master's degree (or equivalent foreign education) in the same fields, accompanied by four (4) years of experience as a Lead Quantitative Development or similar role. Core Engineering • Expert in Python with experience across the development stack (full stack), • Exposure to object-oriented programming (OOP) and design patterns, • Experience in at least one unit testing framework and understanding of test-driven development (TDD) concepts and methodologies, • Skilled in a range of database technologies: SQL (Oracle & Snowflake), NoSQL, Graph, • Skilled in batch and API technologies: such as batch scheduling (using Autosys and Airflow) and creating REST APIs (using FAST API and Flask), • Proven ability to construct and manage robust data pipelines and event-driven workflows, • Proven expertise in system design and cloud architecture on AWS, leveraging resources including Lambda, S3, EKS, and EC2 DevOps & CI/CD • Experience in containerization with Docker and orchestration with Kubernetes, • Implement CI/CD pipelines (using Linux and Jenkins), code versioning using GitHub, • Experience in Infrastructure as Code methodologies for consistent and scalable infrastructure management MLOps & AI Infrastructure • Experience operationalizing machine learning models on AWS, including services such as SageMaker (training, deployment, model registry, monitoring) and Bedrock (foundation model access and fine-tuning), • Operationalizing AI/ML pipelines using modern MLOps principles, including production lifecycle management of AI models, • Familiarity with experiment tracking and model versioning tools (e.g., MLflow), • Identifying and deploying applied ML solutions relevant to quantitative investing: time series forecasting, anomaly detection, NLP, and predictive analytics, • Awareness of responsible AI governance practices, • Demonstrated enthusiasm for contributing to all facets of our AI ecosystem, from application development to MLOps/LLMOps infrastructure, with a versatile, full-stack engineering mindset Quantitative & Domain Knowledge • Demonstrated knowledge of mathematics, statistics, and quantitative finance, • Deep understanding of quantitative techniques and methods, statistics and econometrics including probability, linear regression and time series data analysis, • Analyze and design systems to implement quantitative models for systematic financial investments using R and Python, including time series forecasting models, multi-asset class portfolio construction strategies, risk management tools, alpha research, and simulation-based algorithms, • Domain knowledge in either equities, fixed income or alternative asset classes, • Progress towards CFA (or equivalent) a plus Collaboration & Communication • Strong presentation and communication skills, with a knack for engaging with quant researchers and investment professionals, • Strong problem-solving skills, with a proven ability to work effectively in cross-functional teams, • A creative problem solver and a curiosity fueled by keeping up with advanced methodologies and industry trends, especially in the finance community, • Lead the implementation of a research project through the entire software development lifecycle using a full-stack implementation, • Assist Research teams in developing new models and products that will provide an advantage to the organization in the marketplace The Quant Development team is part of Asset Management's Quantitative Research & Investment Technology group. We partner with Asset Management's Advance Strategies and Research team on cutting edge projects including systematic investment strategies, portfolio construction, risk management, alpha research, and GenAI. We build high quality, robust, and highly-scalable solutions that are used to improve Asset Management's efficiency and decision-making processes. The base salary range for this position is $107,000-216,000 USD per year. Placement in the range will vary based on job responsibilities and scope, geographic location, candidate’s relevant experience, and other factors. Base salary is only part of the total compensation package. Depending on the position and eligibility requirements, the offer package may also include bonus or other variable compensation. We offer a wide range of ___ to meet your evolving needs and help you live your best life at work and at home. These benefits include comprehensive health care coverage and emotional well-being support, market-leading retirement, generous paid time off and parental leave, charitable giving employee match program, and educational assistance including student loan repayment, tuition reimbursement, and learning resources to develop your career. Note, the application window closes when the position is filled or unposted. Please be advised that Fidelity’s business is governed by the provisions of the Securities Exchange Act of 1934, the Investment Advisers Act of 1940, the Investment Company Act of 1940, ERISA, numerous state laws governing securities, investment and retirement-related financial activities and the rules and regulations of numerous self-regulatory organizations, including FINRA, among others. Those laws and regulations may restrict Fidelity from hiring and/or associating with individuals with certain Criminal Histories. Information Technology

The Director of Engineering provides strategic and operational leadership for all engineering functions at a high-volume precision metal stamping manufacturer serving the automotive, electronics, and medical device industries. This executive-level role is responsible for driving product and process innovation, ensuring compliance with industry-specific quality and regulatory requirements, and developing a high-performing engineering team. The Director partners closely with Sales, Quality, Operations, and executive leadership to deliver competitive, manufacturable solutions that exceed customer expectations. KEY RESPONSIBILITIES Strategic Leadership & Business Development • Define and execute the engineering roadmap aligned with company growth objectives across automotive, electronics, and medical device markets., • Serve as the primary engineering liaison for key customer accounts during quoting, design, and program launch phases., • Evaluate and recommend capital equipment investments (progressive dies, transfer presses, automation) to expand manufacturing capabilities., • Oversee tooling design and die engineering for progressive, compound, and transfer dies used in high-precision stamped metal components., • Lead Design for Manufacturability (DFM) reviews and tolerance stack-up analyses for new part programs., • Drive Advanced Product Quality Planning (APQP) and Production Part Approval Process (PPAP) submissions for automotive customers (IATF 16949)., • Ensure engineering compliance with ISO 13485 design controls for medical device component programs., • Recruit, mentor, and manage a team of tool designers, process engineers, and manufacturing engineers., • Establish individual development plans, performance goals, and career advancement pathways., • Ensure all engineering activities comply with IATF 16949 (automotive), ISO 9001 (general), and ISO 13485 (medical device) quality management systems., • Lead root-cause analysis and corrective action (8D, CAPA) for engineering-related customer escapes., • Maintain complete and audit-ready DHF (Design History Files) and technical documentation for regulated industries., • Manage engineering project portfolios from concept through production launch, meeting cost, timing, and quality targets., • Coordinate new model introductions (NMI) and engineering change management (ECN) across internal and customer systems., • Support Operations with press setup optimization, tooling maintenance programs, and troubleshooting of high-volume production issues., • Oversee supplier tooling builds and subcontracted engineering services; conduct supplier technical reviews and audits. REQUIRED QUALIFICATIONS • Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, or closely related field (Master's preferred)., • 10+ years of progressive engineering experience in precision metal stamping, sheet metal fabrication, or closely related metal forming disciplines., • 5+ years of direct people management experience, including hiring and developing engineering staff., • Demonstrated experience supporting at least two of three target industries: automotive, electronics, or medical devices., • Deep proficiency in progressive and/or transfer die design, tooling materials, and press mechanics., • Working knowledge of APQP, PPAP, FMEA, control plans, and GD&T (ASME Y14.5)., • Familiarity with IATF 16949 or ISO 13485 quality management requirements., • Proficiency with CAD software (SolidWorks, AutoCAD, or equivalent) and CAM/simulation tools., • Strong project management skills with experience managing multiple concurrent programs. PREFERRED QUALIFICATIONS • Professional Engineer (PE) license or Six Sigma Black Belt / Green Belt certification., • Experience with automation integration (robotic part handling, vision systems, in-die sensing)., • Knowledge of surface finishing, plating specifications, and secondary operations common in electronics and medical components., • Familiarity with ERP/MRP systems (SAP, Epicor, or similar) in a job-shop or high-volume stamping environment., • Experience with Design of Experiments (DOE) and statistical process control (SPC). CORE COMPETENCIES • Technical Expertise in Metal Forming, • Cross-Functional Collaboration, • Customer Relationship Management, • Data-Driven Decision Making, • Strategic Thinking & Innovation, • Talent Development & Coaching, • Regulatory & Quality Mindset, • Change Management WORK ENVIRONMENT & PHYSICAL REQUIREMENTS This position operates in both an office/engineering environment and on the manufacturing floor. The Director is expected to spend regular time on the production floor engaging with press operators, toolmakers, and quality personnel. Ability to walk production areas, stand for extended periods, and observe precision stamping operations is required. Occasional lifting up to 30 lbs. PPE (safety glasses, hearing protection, steel-toed footwear) required in production areas.

Job Description Position Description A client of AlphaStaffHCM is looking for a Software Engineer with deep expertise in Quantum Information Theory and Network Security. This role is critical in building a secure data path for our quantum networking products. You will responsible for using theoretical quantum principles and photonic hardware to create deployment-ready software for Quantum Key Distribution (QKD), Quantum Zero-knowledge Proof (QZEK-P), Quantum Physical Unclonnable Functions (QPUF), and secure entanglement distribution. Responsibilities • Design and implement high-performance C++ software for real-time quantum cryptographic protocols, including entanglement-based polarization and time-energy QKD., • Develop efficient algorithms for classical post-processing in quantum-secured systems, specifically focusing on Error Correction (Information Reconciliation), Privacy Amplification to maximize secure key rates, and quantum authentication/confirmation., • Architect the Hardware Abstraction Layer (HAL) for distributed quantum networking nodes (Alice/Bob), interfacing with single-photon detectors, polarization controllers, and time-tagging electronics., • Optimize the full cryptographic stack for latency and throughput, ensuring seamless integration between quantum key generation, quantum authentication/confirmation, and the key management entity.., • Collaborate with optical physicists and FPGA engineers to deliver new features and provide updates as existing hardware is upgraded over time., • Develop simulation tools to model channel loss, noise sources, and the statistical performance of quantum protocols. Required Qualifications • Bachelor’s degree in Computer Science, Electrical Engineering, Physics, or Mathematics is required., • 6+ years of experience in software engineering with a focus on systems, security, or embedded devices., • Strong proficiency in C++ and Python., • Deep domain knowledge of Quantum Key Distribution (QKD) protocols (e.g., BB84, E91, BBM92) and their implementation requirements., • Experience implementing Error Correction codes (e.g., LDPC, Cascade, Winnow) or Forward Error Correction (FEC) specifically for noisy communication channels., • Understanding of Quantum Information concepts, including entanglement distribution, Bell state measurement, and qubit polarization encoding., • Familiarity with high-speed data acquisition and processing protocols (e.g., PCIe, DMA, UDP/TCP)., • Familiarity with Linux system programming and build toolchains (CMake, GCC/Clang). Preferred Qualifications • Knowledge of classical cryptography standards (AES, RSA, ECC) and PKI infrastructure., • Familiarity with Post-Quantum Cryptography (PQC) algorithms (Lattice-based, Hash-based)., • Experience with network security protocols (IPsec, TLS/SSL) and how QKD integrates into the OSI model., • Background in Information Theory and statistical analysis for security proofs. Preferred Education • Master’s or Ph.D. in Quantum Information Science, Physics, or Cryptography is highly preferred. Skills C++, Python, Quantum Key Distribution (QKD), Error Correction, Cryptography, Network Security, Entanglement, Polarization, High Performance Computing, Linux, Algorithms. Disclaimers: AlphaStaff, Inc. and the Client are equal employment opportunity employers and do not discriminate against any applicant or employee based on race, color, sex, sexual orientation, gender identity, religion, national origin, age, past or present military service, disability, genetic information, or any other basis protected by applicable federal, state, or local laws.

Job DescriptionJob Description Electronics Technician 100% Travel | United States | Full-Time Position Overview Crown is seeking a highly motivated and skilled Electronics Installation/Disposition Technician to support our floating electronics installation crew. This position requires 100% travel across the United States, often aligned with FAA regional boundaries. This role extends beyond traditional electronics work. The selected candidate must be capable of installing and integrating a complete communications facility, including infrastructure, grounding, cabling, radios, network, and supporting systems. The technician may serve as a key on-site resource, interfacing directly with FAA Air Traffic and Technical Operations personnel while supporting installation and construction crews in the field. Key Responsibilities Electronic System Installation & Integration • Install, configure, align, test, FAA related equipment to include but not to be limited to communication systems, voice control system, and systems as assigned, • Setup and support electronic/networking equipment, • Connect and integrate Telco requirements including Commercial Telco, Field Cable, Fiber Optics, and VOIP communications, • Install new radio racks, radios, and other Government/Vendor Furnished Equipment, • Remove and properly dispose of legacy communications equipment, and create dispensation documentation, • Perform baseline electronic readings and generate required documentation to satisfy customer/FAA requirements, • Perform electronics testing procedures and coordinate frequency outages Infrastructure & Physical Buildout • Mount and install antennas, • Run and terminate coaxial cables and other communication cabling, • Install and test grounding systems and implement surge protection measures, • Perform basic electrical wiring and connections, • Install and assemble equipment racks, cable trays, and electrical conduit, • Ensure proper infrastructure to support the communication system Engineering, Compliance & FAA Interface • Read, interpret, and implement engineering diagrams, blueprints, and electrical wiring diagrams, • Follow provided engineering packages and participate in required field modifications, • Participate in pre-installation meetings, • Interface with FAA Air Traffic and Technical Operations during installations, • Work confidently in geographically isolated environments and create solutions to unique on-site challenges, • Provide guidance and support to other installation and construction crew members, • Communicate effectively with team members, management, and stakeholders, • Understand the practical implications of electrical and electronic circuitry Required Technical Experience • Demonstrated experience installing and maintaining electronic communication and networking equipment, • Familiarity with FAA National Airspace (NAS) communications and networking systems, cabling, and equipment, • Ability to read and interpret schematics, blueprints, and wiring diagrams, • Working knowledge of Microsoft Windows and Microsoft Office (Word, Excel) Minimum Required Qualifications • Must be a U.S. Citizen, • Must possess a valid driver’s license, • Must be able to independently cover travel-related expenses in advance, which are reimbursed within approximately two weeks through a voucher system, • Must be able to obtain a federal background screening security, • Ability to generate required documentation, • Understanding of Telco and networking equipment including Commercial Telco, RCL, Field Cable, VOIP, and Fiber Optics Physical & Work Environment Requirements • Ability to stand, sit, crouch, and work in one position for extended periods, • Ability to lift up to 75 lbs and move up to 350 lbs with hand truck or pallet jack, • Ability to climb and work at heights exceeding 60 feet, • Ability to occasionally perform work under severe time restraints, • Must be in good physical condition and able to pass a physical fitness assessment if required Schedule & Travel Typical schedule is Monday through Friday Must be able to work non-standard hours depending on site requirements. This is a 100% travel position. Compensation Hourly Rate Range: $20.00 to $49.00 per hour (W2) Compensation is determined based on experience, qualifications, geographic location, and internal equity considerations. Crown complies with all applicable state and local pay transparency laws. The listed compensation range represents the good faith salary range for this position at the time of posting. Actual compensation will be based on experience, qualifications, geographic considerations, and business needs. Benefits • 401K with company match, • Comprehensive medical, dental, and vision plans, • Generous PTO About Us Crown Innovations is a recognized leader in research, development, and engineering, with deep expertise in air traffic management, survey administration, lifecycle data management for informed decision-making, infrastructure sustainment and modernization, emerging technologies, and National Airspace System (NAS) integration. For over 30 years, we have supported a diverse portfolio of clients—including the FAA, NASA, the Energy Information Administration (EIA), state and local governments, and commercial organizations such as the Ohio and North Carolina Departments of Transportation. As a prime contractor on several high-impact federal programs, Crown offers comprehensive capabilities in engineering, strategic planning, data analytics, software development, modeling and simulation, and regulatory compliance. We are at the forefront of enabling the safe and efficient integration of uncrewed aircraft systems (UAS) and advanced air mobility (AAM) into the NAS, while also supporting infrastructure modernization efforts through robust lifecycle data management solutions. Whether advancing innovative air traffic concepts, enhancing operational performance, or enabling the future of urban air mobility, Crown is committed to shaping a safer, smarter, and more efficient infrastructure landscape. Crown has consistently been voted one of the best places to work in the Washington, DC area. Persons unable to complete an online application should contact Crown HR for assistance at (703) 650-0663 ext. 3068. As a government contractor, most positions require U.S. citizenship. Crown is a VEVRAA Federal Contractor. EOE: Vets/Disability Additional Information All your information will be kept confidential according to EEO guidelines.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking a Director - Electrical Engineering Systems to lead electrical system design and execution for the Company’s upcoming Eos integrated stellarator. This leader will manage and grow three tightly coupled engineering groups:- Electrical Distribution (facility and plant electrical architecture and integration)- Power Electronics (development of high-power converters and HTS magnet power supplies)- Electronics Systems Engineering (embedded control and instrumentation electronics, including custom PCBAs) This role will own the end-to-end delivery of electrical systems from architecture and requirements through detailed design, prototyping, vendor engagement, test, installation support, and commissioning readiness. The Director will serve as a key cross-functional partner to systems engineering, controls and software, mechanical engineering, safety, and program management, ensuring electrical designs are buildable, testable, safe, and integrated. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. This role will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems. Key Responsibility Areas: • Lead and mentor a multi-disciplinary organization spanning power systems, power electronics, and embedded electronics, including hiring, performance management, career development, and team structure., • Establish engineering operating rhythm: planning, prioritization, technical reviews, staffing plans, and decision-making processes., • Set technical direction and ensure consistent engineering quality across requirements, architecture, implementation, verification, and documentation., • Own the plant-level electrical architecture, including utility interface, substation and distribution design, grounding and protection philosophy, and power quality and reliability strategy., • Guide system modeling and simulation efforts including load flow, short-circuit, and transient studies, and ensure models remain consistent with evolving load envelopes and operating modes., • Lead integration strategy for compensation and storage assets such as STATCOM for load shaping, ride-through capability, and power recovery as applicable., • Own the technical interface to external engineering, procurement, and construction partners and utilities, including technical specifications, design reviews, and factory and site acceptance participation., • Oversee development of high-power converters and magnet power supplies, including topology selection, protection concepts, thermal strategy, and integration with embedded controls., • Develop test strategy and execution: prototype bring-up, staged-load validation, failure mode exploration, parameter tuning, and readiness evidence for integration., • Own hardware architecture for embedded control and instrumentation electronics that interface power conversion hardware, diagnostics, and control firmware., • Lead electromagnetic compatibility and noise mitigation strategy across boards, cabinets, and system integration boundaries., • Partner with systems engineering to translate device requirements into electrical requirements, interface definitions, and verification plans., • Run evidence-based technical gates and design reviews, with clear entry and exit criteria and configuration control., • Own delivery artifacts such as requirements, interface definitions, design packages, test plans, and acceptance evidence to support procurement, installation, and commissioning., • Maintain a strong safety culture including electrical safety, hazard analysis inputs, and design choices that support safe installation and operations., • Provide hands-on leadership in lab and field environments, coordinating with technicians and test teams for build, wiring, installation support, and debug.Ideal Experience & Skillsets:, • Bachelor’s degree or higher in Electrical Engineering or equivalent., • 10 or more years of relevant experience spanning two or more of the following: power systems, substation and distribution, power electronics, embedded electronics, controls hardware, industrial electrical infrastructure., • 5 or more years of engineering management experience leading multi-team organizations, including hiring and performance leadership., • Demonstrated experience owning complex system development from architecture through prototype validation and integration., • Strong foundation in electrical safety, high voltage and high-power engineering practices, and engineering standards and documentation discipline., • Strong cross-functional communication skills and experience driving technical decisions across physics, mechanical, controls software, safety, and program teams., • Experience delivering electrical systems for fusion, accelerator facilities, advanced nuclear, large industrial plants, or other high power research facilities., • Experience with utility interconnection processes, protection coordination, and power quality mitigation., • Experience with battery energy storage systems, static compensators, and dynamic load environments., • Experience establishing verification and validation processes and configuration control for hardware programs., • Familiarity with electromagnetic compatibility practices for high power switching environments and mixed-signal instrumentation., • Power system analysis: ETAP, DIgSILENT PowerFactory, PSCAD, SKM, CYME., • Power electronics simulation and design: PLECS, LTspice, Simulink, Altium or OrCAD., • Electronics design and lab: Altium or OrCAD, oscilloscopes, logic analyzers, power analyzers, electronic loads.Company Benefits:, • Salary range $120,000-$240,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking experienced, highly motivated magnet engineers to join its rapidly growing team. The magnet engineering roles will design, build, and test high temperature superconducting (“HTS”) magnets. HTS magnets are foundational components of Thea Energy’s planar coil stellarator, making compact, simpler, and lower-cost fusion systems possible. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. These roles will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Rapidly design, build, and test HTS magnets, • Develop specifications for magnets based on system design and performance goals, • Optimize magnet design and run analysis using Multiphysics simulation software (e.g. Ansys EM, Structure, COMSOL, etc.), • Develop design tools, data analysis software, and algorithms using Python or similar, • Incorporate design for manufacturing principles and support first builds, • Produce design specifications and collaborate with vendors to get quotes and deliver hardware that meets qualifications, • Support the implementation of tooling and manufacturing, • Design and execute magnet testing, • Track and report results and progress against program goals and milestones, • Communicate and collaborate with internal and external stakeholdersIdeal Experience & Skillsets:, • Experience with magnets, cryogenics, vacuum systems, or transformer design, • Experience in design using CAD software (e.g. Solidworks, CATIA, NX, etc.), • Experience with Ansys and/or COMSOL, • Experience specifying machining, welding, and fabrication requirements, • Ability to work through and solve highly multidisciplinary engineering problems, • Ability to take initiative, work independently and as part of a team, • Ability to execute and flourish in a fast-paced, rapidly changing environment, • Comfortable working to aggressive deadlines, • Exceptional work ethic, • Strong team member with clear communication and collaboration skills, • Innate desire to learn, innovate, and critique ideas including one’s own, • At least a bachelor’s degree in physics, computer science, electrical engineering, mechanical engineering, materials engineering, or related fields, • Experience with magnetic confinement fusion, aerospace, medical devices, or other highly technical industries is idealCompany Benefits:, • Salary range $110,000-$180,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Job DescriptionCompany Description Job Description Certified Tower Climber Technician 100% Travel | United States | Full-Time Position Overview Crown Innovations is seeking Certified Tower Climber Technicians to support the installation, inspection, repair, and remediation of communication towers and related infrastructure. This role is responsible for climbing communication towers and performing hands-on fieldwork to support mission-critical communications systems. The selected candidate must demonstrate strong attention to detail, a commitment to safety, and the ability to work at height in varying weather conditions. This is a 100% travel position, requiring deployment to job sites nationwide, often on short notice. Key Responsibilities Tower Climbing & Installation • Climb communication towers and related structures to perform installation, inspection, repair, and remediation activities, • Perform hands-on work at height in compliance with safety standards and project requirements Inspection & Documentation • Document tower conditions through photos, videos, and written reports, • Complete inspection checklists and technical documentation accurately, • Verify compliance with ANSI/TIA, OSHA, and other regulatory standards Field Operations & Support • Perform site preparation and cleanup, • Support material handling and movement of equipment, • Assist with structure assembly and installation activities, • Operate equipment as required and authorized, • Perform manual labor in support of tower and site work Team Collaboration • Work collaboratively with field and office personnel, • Support team operations to ensure project timelines and deliverables are met Safety & Compliance • Follow all company and industry safety protocols, • Utilize proper PPE, rigging practices, and fall protection systems, • Maintain compliance with all applicable safety regulations and standards Minimum Required Qualifications • Certified Tower Climber (ComTrain, SPRAT, or equivalent), • Minimum 1–2 years of tower climbing experience, • Familiarity with tower types including monopole, guyed, and self-supporting structures, • Knowledge of rigging practices, PPE, and fall protection systems, • Ability to read and interpret tower drawings, inspection checklists, and technical reports, • Strong documentation and communication skills, • Valid driver’s license with a clean driving record, • Willingness to travel and work flexible hours as required, • Ability to pass a drug screening and background check Travel & Work Requirements • This is a 100% travel position across the United States, • Travel may be required on short notice based on project needs, • Employees are required to cover travel-related expenses in advance, which are reimbursed by Crown every 10 days in accordance with company policy Physical & Work Environment Requirements • Ability to work at heights for extended periods, • Ability to perform physically demanding work in outdoor environments, • Ability to work in varying weather conditions including heat, cold, and rain, • Ability to perform manual labor and handle materials and equipment safely Preferred Qualifications • First Aid / CPR and rescue training, • Certified Competent Climber / Rescuer, • OSHA 10 or OSHA 30 certification Schedule & Work Environment • Typical field schedule consists of extended 10-hour workdays, • Work may require non-standard hours based on project requirements, • This is a 100% travel position Compensation Hourly Rate Range: $35 to $40 per hour (W2) Compensation is determined based on experience, qualifications, geographic location, and internal equity considerations. Crown complies with all applicable state and local pay transparency laws. The listed compensation range represents the good faith salary range for this position at the time of posting. Actual compensation will be based on experience, qualifications, geographic considerations, and business needs. Benefits • Medical insurance and prescription drug coverage, • Dental insurance, • Vision insurance, • Life and AD&D insurance, • Long-term disability insurance, • Short-term disability insurance, • Paid time off and paid holidays, • Retirement plan with company match About Us Crown Innovations is a recognized leader in research, development, and engineering, with deep expertise in air traffic management, survey administration, lifecycle data management for informed decision-making, infrastructure sustainment and modernization, emerging technologies, and National Airspace System (NAS) integration. For over 30 years, we have supported a diverse portfolio of clients—including the FAA, NASA, the Energy Information Administration (EIA), state and local governments, and commercial organizations such as the Ohio and North Carolina Departments of Transportation. As a prime contractor on several high-impact federal programs, Crown offers comprehensive capabilities in engineering, strategic planning, data analytics, software development, modeling and simulation, and regulatory compliance. We are at the forefront of enabling the safe and efficient integration of uncrewed aircraft systems (UAS) and advanced air mobility (AAM) into the NAS, while also supporting infrastructure modernization efforts through robust lifecycle data management solutions. Whether advancing innovative air traffic concepts, enhancing operational performance, or enabling the future of urban air mobility, Crown is committed to shaping a safer, smarter, and more efficient infrastructure landscape. Crown has consistently been voted one of the best places to work in the Washington, DC Visit: for additional information about Crown Innovations, Inc. We offer a competitive benefits package including a matching 401K, comprehensive medical, dental, and vision plans, and generous PTO. Crown has been voted one of the best places to work in the Washington, DC area; we built this reputation by hiring great people who value and support the mission of our customers. Persons unable to complete an online application should contact Crown HR for assistance at (703) 650-0663 ext. 3068. As a government contractor, most of the Crown positions require U.S. citizenship. Crown is a VEVRAA Federal Contractor. EOE: Vets/Disability Additional Information All your information will be kept confidential according to EEO guidelines.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is looking for experienced, highly motivated mechanical engineers to join its rapidly growing team. Mechanical engineers will have ownership of the mechanical design and development of primary and secondary components and subsystems in the development of Thea Energy’s stellarator fusion systems. You will be responsible for structural and thermomechanical design, manufacturability, development, and commissioning of these systems. The Thea Energy team is comprised of driven, creative, and fun individuals passionate about solving complex problems.Key Responsibility Areas: • Have ownership of the design and development of primary and secondary mechanical fusion components and subsystems, • Work with core system-level development teams to define prototyping requirements, • Produce mechanical engineering designs, drawings, specifications, and parameters from first principles with appropriate tolerances for vendor quoting and manufacturing, • Design tooling for assembly, • Perform thermal, structural, and electromagnetic analysis and simulation using Ansys and COMSOL, • Incorporate design for manufacturing principles and support first builds, • Support the implementation of tooling and manufacturing, • Design and execute qualification testing, • Track and report results and progress against program goals and milestones, • Communicate and collaborate with internal and external stakeholders, • Mentor junior engineersIdeal Experience & Skillsets:, • Minimum of a bachelor’s degree in mechanical engineering, aerospace engineering, physics, or related fields, • Minimum of 5 years of experience, • Extensive experience as a lead designing, building, and commissioning custom systems, • Experience in mechanical engineering using CAD software (e.g. Solidworks, CATIA, NX, etc.), • Management of complex assemblies with multiple contributors, • Experience specifying machining, welding, and/or fabrication requirements, • Ability to mentor junior engineers in methods to decompose complex problems, and review that work, • Ability to take initiative and guide the design and analysis of complex components and systems with the aid of peers and team members, • Ability to execute and flourish in a fast-paced, rapidly changing environment, • Familiarity with GD&T (ASME Y14.5) & Drawing Standards, • Experience owning systems or complex sub-systems, • Comfortable working to aggressive deadlines, • Exceptional work ethic, • Strong team member with clear communication and collaboration skills, • Innate desire to learn, innovate, and critique ideas including one’s ownCompany Benefits:, • Salary range $110,000-$180,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is looking for experienced, highly motivated mechanical engineers to join its rapidly growing team. Mechanical engineers will have ownership of the mechanical design and development of primary and secondary components and subsystems in the development of Thea Energy’s stellarator fusion systems. You will be responsible for the structural and thermomechanical design, manufacturability, analysis, development, and commissioning of these components. The Thea Energy team is comprised of driven, creative, and fun individuals passionate about solving complex problems.Key Responsibility Areas: • Contribute to the design and development of primary and secondary mechanical fusion components and subsystems, • Produce mechanical engineering designs, drawings, specifications, and parameters from first principals with appropriate tolerances for vendor quoting and manufacturing, • Design tooling for assembly, • Perform thermal, structural, and electromagnetic analysis and simulation using Ansys and COMSOL, • Incorporate design for manufacturing principles and support first builds, • Support the implementation of tooling and manufacturing, • Design and execute qualification testing, • Communicate and collaborate with internal and external stakeholdersIdeal Experience & Skillsets:, • Minimum of a bachelor’s degree in mechanical engineering, aerospace engineering, physics, or related fields, • Experience designing, building, and commissioning custom systems, • Experience in mechanical engineering using CAD software (e.g. Solidworks, CATIA, NX, etc.), • Experience specifying machining, welding, and/or fabrication requirements, • Ability to decompose and solve complex problems, • Ability to take initiative and guide the design and analysis of complex components and systems with the aid of peers and team members, • Ability to execute and flourish in a fast-paced, rapidly changing environment, • Familiarity with GD&T (ASME Y14.5) & Drawing Standards, • Comfortable working to aggressive deadlines, • Exceptional work ethic, • Strong team member with clear communication and collaboration skillsCompany Benefits:, • Salary range $85,000-$150,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview: Thea Energy is looking for an experienced, highly motivated Electrical Engineer to join its rapidly growing team. The Electrical Engineer will work collaboratively across a cross-functional engineering team to help develop Thea Energy’s core planar coil stellarator fusion technologies. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. These roles will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems. Key Responsibility Areas: • Design, construct, and operate power supplies and control systems for high-temperature superconducting magnets and plasma heating systems (ECRH)., • Specify, design, develop, fabricate, and commission bespoke electronic systems, encompassing low-signal analog and digital equipment, capable of operating in high-stress industrial environments including high magnetic field, vacuum, and cryogenic temperatures., • Provide comprehensive specifications and facilitate the procurement of commercial off-the-shelf electronic products., • Actively engage in discussions to define requirements for the systems to be designed., • Provide full-cycle project support, from design to operation, including prototyping and testing of samples., • Collaborate and communicate effectively with engineering, physics/science, project management, and procurement groups., • Generate and revise work packages, including electrical drawings and technical specifications., • Manage critical procurement contracts and coordinate with vendors for electrical system design, procurement, and commissioning., • Select and implement industry standards (IEEE, ANSI, IEC, etc.) for use in prototyping projects and the future fusion power plant ecosystem., • Maintain a detailed project schedule, oversee the delivery of externally furnished documentation and equipment, and coordinate subcontractors. Ideal Experience & Skillsets:, • MS, or PhD in Electrical Engineering or related fields., • 5+ years of experience in the design and implementation of electrical and electronic systems in an industrial and/or scientific environment., • Technical proficiency in multiple areas of electrical engineering, including a subset of the following: power conversion, medium voltage distribution, switchgears, protective relaying, low voltage process-industrial facility design, instrumentation, and control., • Experience using PCB design software (Altium)., • Experience using CAD software (AutoCad, Solidworks)., • Experience in designing front-end analog electronics (differential amplifiers, trans-impedance amplifiers, precise and fast voltage comparators)., • Experience in the design and implementation of power electronics components: PWM converters (GaN/SiC/MOSFETs/IGBTs.), DCL-capacitors, high-frequency transformers, and inductors., • Experience using simulation software (PSpice, PLECS, MATLAB, Simulink)., • Nice to have experience with designing DSP- and MCU-based embedded control systems., • Experience in the integration of software and hardware in a high voltage, high current environment would be beneficial., • Experience in pulsed power systems; electrical and mechanical transient analysis and/or design implications in complex power systems., • Demonstrated ability to manage system installation within a complex project. Ability to interface with contractors, vendors, and designers., • Excellent written and verbal communication skills, ability to conduct design reviews, and organize/present material to both expert and non-technical audiences., • Ability to take initiative, work independently, and as part of a team., • Comfortable working to aggressive deadlinesCompany Benefits:, • Salary range $130,000-$150,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Job Description A client of AlphaStaffHCM™ is searching for a Research Scientist who will work on the modeling, simulation, and architectural development of quantum and artificial intelligence (AI) computational structures intended for chip-scale implementation. The right candidate must be able to work onsite in Hoboken, NJ. Key Responsibilities: • Develop and simulate quantum and AI-based photonic architectures for on-chip, • implementation., • Translate high-level computational concepts into device-level and system-level, • simulation models., • Perform rigorous electromagnetic and Multiphysics simulations to evaluate optical,, • nonlinear, and quantum effects., • Model and simulate quantum photonic circuits and quantum gates under realistic device, • conditions., • Analyze fabrication tolerances and material constraints to assess design robustness., • Optimize photonic device structures for performance, scalability, and manufacturability., • Collaborate closely with fabrication and packaging teams to ensure simulation models, • align with process capabilities., • Support post-fabrication validation by correlating experimental results with simulation, • predictions., • Document modeling methodologies, simulation results, and architectural trade-offs for internal and external reporting Must Have Qualifications: • Ph.D. in Physics, Applied Physics, Electrical Engineering, or a closely related discipline., • Strong foundation in Photonics, Quantum optics, Nonlinear optics, • Demonstrated experience in simulation of photonic integrated circuits., • Experience modeling and simulating quantum gates/ quantum optical systems., • Understanding of semiconductor/TFLN and photonic chip fabrication processes, • Familiarity with chip testing and packaging considerations from a modeling perspective., • Software experience with Lumerica, Python, and Tidy3D Nice to Have Qualifications • Software experience with COMSOL Multiphysics, MATLAB, and/or Z-Max, • Demonstrated experience as a self-starter, • Demonstrated experience as a quick leaner Compensation and Perks • Salary range: $120,000-$150,000 annually, based on experience., • Medical, dental, and vision coverage., • Generous PTO and a retirement match., • 9:00-5:00 in office schedule Disclaimers: AlphaStaff, Inc. and the Client are equal employment opportunity employers and do not discriminate against any applicant or employee based on race, color, sex, sexual orientation, gender identity, religion, national origin, age, past or present military service, disability, genetic information, or any other basis protected by applicable federal, state, or local laws.

Job DescriptionJob Description Communications Electronics Installation Technician 100% Travel | United States | Full-Time Position Overview Crown is seeking a highly motivated and skilled Communications Electronics Installation Technician to support our floating electronics installation crew. This position requires 100% travel across the United States, often aligned with FAA regional boundaries. This role extends beyond traditional electronics work. The selected candidate must be capable of installing and integrating a complete communications facility, including infrastructure, grounding, cabling, radios, and supporting systems. While not initially designated as a formal lead role, this position offers significant opportunity for growth and increasing leadership responsibility based on performance. The technician may serve as a key on-site resource, interfacing directly with FAA Air Traffic and Technical Operations personnel while supporting installation and construction crews in the field. Key Responsibilities Communications System Installation & Integration • Install, configure, align, test, and troubleshoot VHF and UHF radios and associated communication systems, • Setup and support Radio Control Equipment (RCE), • Connect and integrate Telco requirements including Commercial Telco, RCL, Field Cable, and Fiber Optics, • Install new radio racks, radios, and other Government Furnished Equipment (GFE), • Remove and properly dispose of legacy communications equipment, • Perform baseline electronic readings and generate required documentation including FRDF in accordance with FAA Technical Handbooks, • Perform electronics testing procedures and coordinate frequency outages Infrastructure & Physical Buildout • Mount and install antennas, • Run and terminate coaxial cables and other communication cabling, • Install and test grounding systems and implement surge protection measures, • Perform basic electrical wiring and connections, • Install and assemble equipment racks, cable trays, and electrical conduit, • Ensure proper infrastructure to support the communication system Engineering, Compliance & FAA Interface • Read, interpret, and implement engineering diagrams, blueprints, and electrical wiring diagrams, • Follow provided engineering packages and participate in required field modifications, • Participate in pre-installation meetings, • Interface with FAA Air Traffic and Technical Operations during installations, • Work confidently in geographically isolated environments and create solutions to unique on-site challenges, • Provide guidance and support to other installation and construction crew members, • Communicate effectively with team members, management, and stakeholders, • Understand the practical implications of electrical and electronic circuitry Required Technical Experience • Demonstrated experience installing and maintaining VHF and UHF ground-to-air communication equipment, • Familiarity with FAA National Airspace (NAS) communications systems, cabling, and equipment, • Ability to read and interpret schematics, blueprints, and wiring diagrams, • Working knowledge of Microsoft Windows and Microsoft Office (Word, Excel) Preferred Technical Skills & System Exposure Experience with the following is strongly preferred but not required: • Spectrum Analyzer, • Time-Domain Reflectometer, • Signal Generator, • Oscilloscope, • Microwave systems, • Voice Switch systems, • Air Traffic Control systems, • Commercial Driver’s License and trailer experience, • Experience operating heavy equipment Minimum Required Qualifications • Must be a U.S. Citizen, • Must possess a valid driver’s license, • Must be able to independently cover travel-related expenses in advance, which are reimbursed within approximately two weeks through a voucher system, • Must be able to obtain a federal security clearance. Clearance eligibility includes no legal offenses within the past five years, no ongoing legal issues, and honorable discharge if previously having served in the military., • Associate’s Degree or completion of a two-year technical training or certification program in a relevant field, plus a minimum of two years of relevant experience, • Ability to generate required FAA documentation including FRDF, • Setup capability for Radio Control Equipment (RCE), • Understanding of Telco requirements including Commercial Telco, RCL, Field Cable, and Fiber Optics Physical & Work Environment Requirements • Ability to stand, sit, crouch, and work in one position for extended periods, • Ability to lift up to 75 lbs and move up to 350 lbs with hand truck or pallet jack, • Ability to climb and work at heights exceeding 60 feet, • Ability to occasionally perform work under severe time restraints, • Must be in good physical condition and able to pass a physical fitness assessment if required Schedule & Travel Typical schedule is Monday through Thursday, 6:00 AM to 4:30 PM. Must be able to work non-standard hours depending on site requirements. This is a 100% travel position. Compensation Hourly Rate Range: $20.00 to $49.00 per hour (W2) Compensation is determined based on experience, qualifications, geographic location, and internal equity considerations. Crown complies with all applicable state and local pay transparency laws. The listed compensation range represents the good faith salary range for this position at the time of posting. Actual compensation will be based on experience, qualifications, geographic considerations, and business needs. Benefits • 401K with company match, • Comprehensive medical, dental, and vision plans, • Generous PTO About Us Crown Innovations is a recognized leader in research, development, and engineering, with deep expertise in air traffic management, survey administration, lifecycle data management for informed decision-making, infrastructure sustainment and modernization, emerging technologies, and National Airspace System (NAS) integration. For over 30 years, we have supported a diverse portfolio of clients—including the FAA, NASA, the Energy Information Administration (EIA), state and local governments, and commercial organizations such as the Ohio and North Carolina Departments of Transportation. As a prime contractor on several high-impact federal programs, Crown offers comprehensive capabilities in engineering, strategic planning, data analytics, software development, modeling and simulation, and regulatory compliance. We are at the forefront of enabling the safe and efficient integration of uncrewed aircraft systems (UAS) and advanced air mobility (AAM) into the NAS, while also supporting infrastructure modernization efforts through robust lifecycle data management solutions. Whether advancing innovative air traffic concepts, enhancing operational performance, or enabling the future of urban air mobility, Crown is committed to shaping a safer, smarter, and more efficient infrastructure landscape. Crown has consistently been voted one of the best places to work in the Washington, DC area. Persons unable to complete an online application should contact Crown HR for assistance at (703) 650-0663 ext. 3068. As a government contractor, most positions require U.S. citizenship. Crown is a VEVRAA Federal Contractor. EOE: Vets/Disability

Job Description A client of AlphaStaffHCM is seeking an experienced and talented Senior Hardware Engineer to be part of our hardware development efforts. As a Senior Hardware Engineer, you will be responsible for designing, developing, and testing advanced hardware systems. This position offers a unique opportunity to apply your expertise and skills in a challenging and innovative technology environment. This position offers a unique opportunity to be at the forefront of quantum technology, contributing to the advancement of groundbreaking solutions in the rapidly evolving field of quantum computing. If you are passionate about changing the world by empowering revolutionary new quantum technologies, we want to hear from you! Duties and Responsibilities: • Support the development of several platforms based around classical and quantum photonics as a senior hardware engineer., • Work alongside other hardware engineers to design custom electronics using Altium Designer., • Evaluate critical component performance via board-level and system-level lab testing (ADCs, DACs, FPGAs, TDCs, etc.), • Work with firmware engineers, software engineers, and quantum scientists during various phases of lab testing., • Work with contract manufacturers during manufacturing phases to procure custom electronics, addressing and mitigating any necessary design changes along the way., • Validate the performance of custom electronics with lab testing. Document any issues uncovered during testing., • Maintain documentation expected at milestone events during the entire design cycle (theory of operations, manufacturing documentation, validation testing results, etc.), • Integrate hardware into the complete system by working closely with mechanical, firmware, and FPGA engineers. Required Skills and Experience: • Bachelor of Science (BS) in Electrical Engineering or Computer Engineering (EE or CE) from an accredited university., • BS in EE or CE and 6+ years of experience or MS EE or CE with 4+ years of experience., • Proven experience designing PCBs from schematic capture, layout design, and review., • Experience with at least one ECAD suite (Altium, OrCAD, Allegro, CircuitMaker, or others) Altium is strongly preferred., • Familiarity with PCB design best practices related to Signal Integrity, Power Integrity, and EMI/EMC compliance., • Strong foundation in PCB design related to DFM, DFT, and DFA best practices., • Strong electrical engineering fundamentals in Analog, Power, and Digital Electronics., • Advanced experience with voltage regulators, LDO, and switch mode power supplies (SMPS)., • Experience with analog electronics design (op-amps, TIAs, filters, etc.), • Experience with digital electronics design (Logic Gates, Flip Flops, Microcontrollers, RAM, ROM, Flash, etc.), • Advanced knowledge of simulation tools such as SPICE., • Strong experience with low to medium-speed digital interfaces and protocols (I2C, CAN, UART, SPI, etc.)\, • Hands-on experience with board bring-up, debugging, testing, and integration with lab instruments such as: DMMs, Oscilloscopes, Logic Analyzers, and Spectrum Analyzers., • Able to code C, C++, MATLAB/Octave, or Python., • Working knowledge of Verilog is a huge plus., • Able to lift weights up to 50lbs (occasionally)., • Excellent problem-solving and analytical skills., • Excellent written and verbal communication skills., • Detail-oriented. Additional Preferred Skills: • Master of Science (MS) degree in Electrical Engineering or Computer Engineering (EE or ECE)., • Experience designing electronics with complex computing devices such as FPGAs, MCUs, CPUs, DSPs, etc., • Experience working with optoelectronics., • Experience with high-speed serial protocols (USB, PCIe, Ethernet, etc.), • Experience with RF analog, digital, and mixed-signal electronics., • Experience designing systems to meet compliance and certification requirements (e.g., CE/FCC)., • Experience integrating custom ASICs into designs., • FPGA/SoC/MCU lab validation with lab equipment., • Experience writing low-level firmware (C, Verilog, VHDL, etc.), • Experience with manual board prototyping/refurbing using essential equipment like soldering irons and hot air guns. Disclaimers: AlphaStaff, Inc. and the Client are equal employment opportunity employers and do not discriminate against any applicant or employee based on race, color, sex, sexual orientation, gender identity, religion, national origin, age, past or present military service, disability, genetic information, or any other basis protected by applicable federal, state, or local laws.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking experienced, highly motivated magnet engineers to join its rapidly growing team. The magnet engineering roles will design, build, and test high temperature superconducting (“HTS”) magnets. HTS magnets are foundational components of Thea Energy’s planar coil stellarator, making compact, simpler, and lower-cost fusion systems possible. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. These roles will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Rapidly design, build, and test HTS magnets, • Develop specifications for magnets based on system design and performance goals, • Optimize magnet design and run analysis using Multiphysics simulation software (e.g. Ansys EM, Structure, COMSOL, etc.), • Develop design tools, data analysis software, and algorithms using Python or similar, • Incorporate design for manufacturing principles and support first builds, • Produce design specifications and collaborate with vendors to get quotes and deliver hardware that meets qualifications, • Support the implementation of tooling and manufacturing, • Design and execute magnet testing, • Track and report results and progress against program goals and milestones, • Communicate and collaborate with internal and external stakeholdersIdeal Experience & Skillsets:, • Experience with magnets, cryogenics, vacuum systems, or transformer design, • Experience in design using CAD software (e.g. Solidworks, CATIA, NX, etc.), • Experience with Ansys and/or COMSOL, • Experience specifying machining, welding, and fabrication requirements, • Ability to work through and solve highly multidisciplinary engineering problems, • Ability to take initiative, work independently and as part of a team, • Ability to execute and flourish in a fast-paced, rapidly changing environment, • Comfortable working to aggressive deadlines, • Exceptional work ethic, • Strong team member with clear communication and collaboration skills, • Innate desire to learn, innovate, and critique ideas including one’s own, • At least a bachelor’s degree in physics, computer science, electrical engineering, mechanical engineering, materials engineering, or related fields, • Experience with magnetic confinement fusion, aerospace, medical devices, or other highly technical industries is idealCompany Benefits:, • Salary range $85,000-$150,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Title: Senior Transportation Engineer Department: Civil & Environmental Engineering Reports To: Department Chair, Civil and Environmental Engineering Position Type: Staff Position Summary: Under the supervision of the Chair of the Department of Civil and Environmental Engineering, the Senior Transportation Engineer works with faculty and other research staff on complex transportation planning analysis tasks related to sponsored research projects, focusing on transportation data development and analysis, use of regional travel demand, traffic and simulation models, and ITS engineering. Under the direction of the Department Chair and Principal Investigators on research projects, the Senior Transportation Engineer participates in a variety of research activities, including performing technical analysis work, preparing documentation, assisting with technology transfer activities, and participating in communication with clients. Duties also include needs assessment, implementation and support for research tasks to which the incumbent is assigned. Essential Functions: • Manages one or more tasks for sponsored research projects. The incumbent will focus on areas of transportation modeling and systems analysis, traffic engineering, ITS, and transit systems operations. The incumbent will utilize and apply travel demand modeling, traffic engineering and simulation, GIS, and other transportation and mathematical modeling and analysis software., • Keeps up with the state-of-the-practice in transportation modeling, traffic engineering and operations, and ITS, including innovations in related software tools. Implements this knowledge in research activities. (55%), • Performs (as assigned) literature review, problem identification, data collection and analysis, analysis of solutions, and development of recommendations., • Works with faculty, research staff, and students on preparing technical scopes of work for research projects, and assists the Principal Investigators with developing project schedules., • Assists faculty and other researchers with managing all aspects of the technical work in the areas of transportation modeling and systems analysis, traffic engineering and ITS, including the scheduling and assignment of work tasks. (30%), • Prepares technical memoranda and progress reports summarizing the results of the technical work. The incumbent will also be responsible for preparing sections of the Final Report documents related to the work tasks performed as part of research projects, including printed and electronic data and reports for submission and presentation to research clients. The Senior Transportation Engineer will attend meetings as necessary with NJIT faculty and staff, as well as meetings with research clients., • In coordination with faculty prepares and sends for publication research reports and papers related to conducted research. (10%) Additional Functions: • Assists faculty with graduate student guidance and mentoring by providing expertise and advice in the areas of transportation modeling, engineering, ITS, and data analysis. (5%), • Performs other related duties as assigned by the Chair of the Department of Civil and Environmental Engineering or Principal Investigators on research projects. Prerequisite Qualifications: • Master's degree in Transportation, Urban Planning, or a related field., • Three years related experience in the computer based transportation modeling, simulation, and systems analysis., • Working knowledge of regional and local transportation planning and engineering practices in New Jersey, as well as basic transportation engineering theory and practices nationwide., • Working experience in computer based traffic analysis, preferable using Synchro., • Working experience in computer-based transportation modeling (Cube, TransCAD, or VISUM) and simulation (Paramics, VISSIM, or CORSIM)., • Must have a strong computer background, including high-level proficiency with Microsoft Windows and Office software, including Word, Excel, Power Point, Access, and Visio., • Knowledge and working experience using data analysis tools such as New Jersey Congestion Management System (NJCMS), New Jersey Accident Record Database (NJARD), and Census Transportation Planning Package (CTPP)., • Must have excellent oral and written communication skills, • At the university's discretion, the education and experience prerequisites may be exempted where the candidate can demonstrate to the satisfaction of the university, an equivalent combination of education and experience specifically preparing the candidate for success in the position Preferred Qualifications: -Experience with ITS engineering and systems analysis is preferred. Bargaining Unit: PSA Salary Information: In compliance with the NJ Pay Transparency Law, the negotiated annual salary range for this position is $63,129.05-$113,324.04 (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. To learn more about the comprehensive benefits NJIT offers for this position, please visit our benefits page . Range/Band: 22 FLSA: Exempt Full-Time Apply NowShare Save Job

Write clean, efficient, and well-documented code, following best software engineering practices. Contribute to the full software development lifecycle, from concept and design to testing and deployment. Proficiency in building scalable, reliable, and maintainable software systems.

Location - Jersey City (Remote).Strong expertise in guidewire policy center and guidewire claim center configuration and customization.Proficiency in guidewire data model, rules, and integration technologies.Ability to translate business requirements into technical solutions within guidewire platfor

Job Title: Senior Software Engineer. We are seeking a Senior Software Engineer to design and develop advanced cyber capabilities that strengthen national security. Develop advanced security analysis tools, vulnerability research workflows, and software.

Proficiency with structural analysis software such as RISA or STAAD. Proficiency with MS Office suite software including MS Teams for remote coordination. Knowledge of CAD software, such as AutoCad, Revit, MicroStation and S3D.

Please send current resumes directly to bhagyashree.Bhagyashree Yewle, Principal Lead Recruiter - YOH SPG.Contract Senior Data Engineer – Airflow, DBT Core, Kubernetes/OpenShift - Hybrid Onsite in Jersey City, NJ .Location: Jersey City, NJ // Hybrid: 3 days a week.Open to W2 and CTC contractors

Check the links below: please check the below links Why do Tech Companies not Hire recent Computer Science Graduates | SynergisticIT Technical Skills or Experience? | Which one is important to get a Job? | SynergisticIT We Focus on Java /Full stack/Devops and Data Science /Data Engineers/Data analys

Our Client which is a large Investment Bank is urgently looking to hire a Sr.Java Developer – Struts Migration experience.Java Developer - Struts Migration.Location: Jersey City, New Jersey.Face to Face Interview is required.Skills – Java, Struts Migration, Java to Jakarta namespace migration, H

Please send current resumes directly to bhagyashree.Bhagyashree Yewle, Principal Lead Recruiter - YOH SPG.Contract Senior Data Engineer – Airflow, DBT Core, Kubernetes/OpenShift - Hybrid Onsite in Jersey City, NJ .Location: Jersey City, NJ // Hybrid: 3 days a week.Open to W2 and CTC contractors

Job Title: Senior Python Full Stack Developer (50% React+50% Python).Location : Jersey City ,New NJ (Onsite Role-5 Days Onsite Per Week).Duration : 12+ Months Contract.Berribot Test Required after Submission.Lead development of front‑end applications using.Design and build high‑throughput backen

Our Client which is a large Investment Bank is urgently looking to hire a Sr.Java Developer – Struts Migration experience.Java Developer - Struts Migration.Location: Jersey City, New Jersey.Face to Face Interview is required.Skills – Java, Struts Migration, Java to Jakarta namespace migration, H

Job Title: Senior Python Full Stack Developer (50% React+50% Python).Location : Jersey City ,New NJ (Onsite Role-5 Days Onsite Per Week).Duration : 12+ Months Contract.Berribot Test Required after Submission.Lead development of front‑end applications using.Design and build high‑throughput backen

A leading healthcare services provider is seeking an Integration Engineer to design and maintain enterprise-level interoperability systems.This remote role involves managing integration platforms and ensuring compliance with healthcare standards.The ideal candidate has over 5 years of experience, ex

Job Title: Senior Python Full Stack Developer (50% React+50% Python).Location : Jersey City ,New NJ (Onsite Role-5 Days Onsite Per Week).Duration : 12+ Months Contract.Berribot Test Required after Submission.Lead development of front‑end applications using.Design and build high‑throughput backen

Duration: 7 months (Possibility of extension).We are seeking an experienced AWS Data Engineer to join our Data Engineering team.As a technical leader, you will be responsible for architecting, implementing, and managing scalable data solutions on AWS.You will provide technical guidance to a team of

At Selective, we don't just insure uniquely, we employ uniqueness.Selective's unique position as both a leading insurance group and an employer of choice is recognized in a wide variety of awards and honors, including listing in Forbes Best Midsize Employers in 2025 and certification as a Great Plac

Please send current resumes directly to bhagyashree.Bhagyashree Yewle, Principal Lead Recruiter - YOH SPG.Contract Senior Data Engineer – Airflow, DBT Core, Kubernetes/OpenShift - Hybrid Onsite in Jersey City, NJ .Location: Jersey City, NJ // Hybrid: 3 days a week.Open to W2 and CTC contractors

Our Client which is a large Investment Bank is urgently looking to hire a Sr.Java Developer – Struts Migration experience.Java Developer - Struts Migration.Location: Jersey City, New Jersey.Face to Face Interview is required.Skills – Java, Struts Migration, Java to Jakarta namespace migration, H

A technology solutions provider is seeking a skilled Senior Software Engineer specialized in.

Solid foundation in object-oriented design, data structures, design patterns and software architectures.

Happiest Minds Technologies is seeking a hands-on Data Engineer located in New Jersey to build reliable, scalable Databricks pipelines.The successful candidate will translate requirements into production ELT/ETL jobs, optimize Spark performance, and apply Unity Catalog best practices.Candidates shou

Citibank (Switzerland) AG in Jersey City is seeking an experienced Data Engineering Architect to design and develop scalable data infrastructure.The role requires 10+ years in data engineering and technical leadership, emphasizing coding in Python or Scala and strong SQL skills.Responsibilities incl