Support technician jobs in Carteret, New JerseyCreate job alerts

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio. IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: The Level B Fleet Mechanic/Technician is a journeyman-level role responsible for independent diagnosis and repair of most mechanical, electrical, and hydraulic issues on refuse trucks, heavy trucks/tractors, trailers, and heavy equipment. This role also mentors Level C technicians, supports road calls, and ensures high uptime and DOT compliance for the fleet. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: Diagnostics & Repair • Independently diagnose and repair:, • Diesel and gasoline engines (intake, fuel, cooling, aftertreatment/emissions components)., • Drivetrain components including clutches, transmissions, differentials, PTOs, and drive lines., • Air and hydraulic brake systems, ABS, and suspension components., • Hydraulic systems on refuse equipment (packer bodies, arms, cylinders, pumps, valves, and hose routing)., • Electrical systems including starting/charging, multiplex wiring, sensors, and lighting. Preventive Maintenance & Compliance • Perform and sign off on DOT-compliant inspections and PMs, ensuring all safety-critical items are addressed and documented., • Accurately interpret and close out DVIR/eDVIR defects; communicate recurring defects to leadership for root-cause analysis., • Use OEM and aftermarket diagnostic software, service bulletins, and wiring schematics to troubleshoot complex issues. Road Calls & Operational Support • Respond to road calls and breakdowns throughout the NYC tri-state area; perform safe temporary or permanent repairs to return vehicles to service or coordinate towing as needed., • Communicate clearly with dispatch, supervisors, and drivers on repair status and estimated completion times. Mentorship, Training & Documentation • Guide and mentor Level C technicians on best practices, safety, troubleshooting, and proper repair methods., • Complete work orders thoroughly, capturing complaint, cause, correction, labor hours, and parts used., • Support continuous improvement initiatives for PM compliance, repeat repair reduction, and parts standardization. Requirements and Qualifications::, • High school diploma or GED required., • 3–5+ years hands-on experience as a diesel, truck, or heavy equipment mechanic/technician, including diagnostics and major component replacement., • Valid CDL Class B (or higher) with air brake endorsement strongly preferred to perform road tests and move equipment on public roads within NY/NJ/CT., • Demonstrated proficiency with hydraulic, pneumatic, and electrical systems., • Ability to read and interpret OEM service manuals, wiring diagrams, and hydraulic schematics., • Experience in refuse/solid waste, municipal, or LTL/heavy trucking fleet operating in urban environments preferred., • ASE certifications in Medium/Heavy Truck (T series) or Truck Equipment (E series); working toward Master status preferred., • Basic welding and cutting skills (MIG, stick, torch) for brackets, hangers, and minor body fabrication preferred., • Familiarity with computerized fleet maintenance and parts inventory systems preferred. Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $28.80/Hr. Salary Range Maximum: USD $28.80/Hr.

All Tire & Service – Staten Island, NY If you’re the tech everyone else calls when they can’t figure it out, keep reading. All Tire & Service is hiring a high-level Diagnostic A-Tech to take the lead at our busy Page Ave location in Staten Island. This shop does serious volume, and we need someone who can own diagnostics, solve drivability issues fast, and help elevate the team around them. This is not a dead-end flat-rate shop drowning in warranty work. We’re a growing multi-location operation with strong car count, modern systems, leadership support, and a real opportunity to make an impact. About the Shop All Tire & Service operates multiple high-volume locations across Staten Island and New Jersey. Our Page Ave location is one of the busiest shops in the group with approximately 850 cars per month running through 6 bays. We service a mix of Domestic, Asian, and European vehicles and need a true diagnostic professional who can help increase shop efficiency, improve throughput, and remove technical bottlenecks from management and advisors. You’ll work with modern shop systems including: • Tire Shop / Freedom SMS, • Steer CRM, • AutoOps This is a shop where your skill level matters and leadership actually supports the technicians. What You’ll Get • $100,000–$120,000+ yearly earning potential, • Hourly pay with overtime available, • High car count shop with steady workflow, • Complex diagnostic work — not just brakes and tires, • Supportive ownership focused on fixing operational bottlenecks, • Opportunity to mentor and lead junior techs, • Medical, dental, and vision contribution ($450/month), • PTO, • 401(k), • Paid training and certification reimbursement, • Uniforms provided, • Stable, established multi-shop operation How to Apply (Important) We move fast — and so should you. Step 1: Apply Step 2: Complete a quick phone interview with our AI assistant “Paige” (takes about 10 minutes) After you apply, you’ll receive an automated text message with a phone number you can call at your convenience to complete the interview. Candidates who complete the Paige interview get priority. What We’re Looking For • 10+ years of automotive technician experience, • Advanced diagnostic ability, • Strong drivability and check engine light troubleshooting skills, • Ability to work on Domestic, Asian, and European vehicles, • Leadership mindset and willingness to mentor younger techs, • Strong electrical and scan tool knowledge, • Clean driving record, • NYS Inspector License preferred Shop Information All Tire & Service – Page Ave 115 Page Ave. Staten Island, NY 10309 Hours: • Monday–Friday: 7:30 AM – 6:00 PM, • Saturday: 8:00 AM – 4:00 PM If you’re tired of being the smartest person in the shop without the pay, support, or respect to match — this is the opportunity you’ve been waiting for.

Job Description Our shop is located in GARLAND TX. For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in GARLAND TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned AUDI Master Guild Technician ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a AUDI Master Guild Technician to join our elite team. If you specialize in AUDI and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest AUDI and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with AUDI vehicles Strong specialization and experience with AUDI vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on AUDI vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc243577

Job DescriptionJob Description: The Lube Technician is expected to: Protect the legal, financial and moral well-being of the dealership; Perform lube, oil, filter and multipoint service for customer vehicles; Be a teacher to support the efforts of other employees to be successful. Seek ways to improve business operations efficiencies and customer service. Primary Duties: 1. Ensure maximum productivity, customer service and cost control. Perform all lube, oil, filter and multi-point inspection processes to ensure proper diagnoses. Assess any supplemental vehicle needs. Perform quality service at all times and notify management of any substandard processes, parts or procedures. Maintain clean vehicles during all servicing and repairs. Achieve customer service satisfaction through prompt and accurate service and communication. Maintain a clean and safe work environment at all times and adhere to all OSHA/EPA requirements. Perform all job duties requested by management. 2. Operate with integrity: Demand the highest ethical standards from self and others. Set an example of positive attitude and professionalism, including a neat, orderly and safe work environment. Set an example of outstanding attendance, positive attitude, professionalism, including orderly and safe work environment. Maintain a neat, orderly and safe work environment Job Requirement:Job Qualifications: High school diploma or the equivalent recommended but not required. One year experience as a technician's assistant or apprentice. Maintain valid driver's license and MVR within company policy requirements. Local state inspection license preferred Physical Requirements: Work performed in shop setting While performing the duties of this job, the employee is exposed to weather conditions precedent at that time. Exposure to shop environment such as noise, dust, odors and fumes, chemicals and adhesives. Required to lift up to a minimum of 100 lbs. Regularly required to sit, stand, bend, reach, talk, hear, use hands and fingers, handle or operate objects, tools or controls. Occasionally required to stoop, kneel or crouch. Required vision include close vision, distance vision, peripheral vision and the ability to adjust focus. Required to operate equipment and move vehicles in a safe manner at all times. To perform the job successfully, an individual should demonstrate the following competencies to perform the essential functions of this position: Leadership- the individual demonstrates ethical and followership behaviors which promotes our company standards resulting in a cohesive and effective team. Compliance- the individual understands and adheres to all Company standards, state and federal laws and regulations as well as product pricing guidelines of all lenders, agencies or business partners. Customer Service- the individual understands his/her role in providing excellent customer service through the defined processes which promote efficiencies, fairness and cost effectiveness. Ethics/Integrity- the individual represents the dealership by conducting his/her self in a professional and courteous business manner that demonstrates integrity and avoids the actual or perception of a conflict of interest. Oral Communication- the individual clearly identifies and professionally expresses issues in positive or negative situations. Planning/Organizing- the individual prioritizes and plans work activities and uses time efficiently. Quality- the individual demonstrates accuracy and thoroughness and monitors own work to ensure quality. Dependability- the individual is consistently at work and on time, follows instructions, responds to management direction and solicits feedback to improve performance. Safety and Security- the individual observes safety and security procedures and uses equipment and materials properly. Benefits Include: Our team members enjoy a positive working environment with opportunities for professional growth through training and advancement from within the organization. Our team members also enjoy a comprehensive benefits program including: Medical, Employee discounts on vehicle purchases, parts and service Paid-time-off Comprehensive employee recognition programs. Continued training through the manufacturer. Opportunities for career advancement. When you join our organization, you'll enjoy comprehensive training, competitive compensation, and unparalleled benefits. Simply put, you'll experience the best that a career in the automotive industry has to offer. The above statements are intended to describe the general nature and level of the work being performed by people assigned to this work. This is not an exhaustive list of all duties and responsibilities. We reserve the right to amend and change responsibilities to meet business and organizational needs as necessary. We are an Equal Opportunity Employer and a drug free workplace. We Would Love To Talk With You! Apply By Clicking The 'Apply Now' Button

Job Description For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in DALLAS TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned Porsche technician ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a Porsche Master Technician to join our elite team. If you specialize in Porsche and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest Porsche and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with European vehicles Strong specialization and experience with Porsche vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on Porsche vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc237926

Job Description Our shop is located in GARLAND TX. For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in GARLAND TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned AUDI Master Guild Technician ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a AUDI Master Guild Technician to join our elite team. If you specialize in AUDI and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest AUDI and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with AUDI vehicles Strong specialization and experience with AUDI vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on AUDI vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc243570

Job Description Kia Retailers are offering skilled and experienced military Veterans with the opportunity to begin an inspiring career as a Kia Certified Service Technician. To support this Kia Retailer initiative, Kia America, Inc. has established the Kia Veterans Technician Apprenticeship Program (VTAP). Job Description • Diagnose, maintain, and repair Kia vehicles including engine, transmission, steering, suspension, brakes, HVAC, and electrical components, • Complete repair orders and warranty request orders in accordance with established Kia and Retailer policies and procedures, • Test drive vehicles, and analyze, diagnose, and repair components and systems using Kia diagnostic strategies, special equipment, and tools, • Perform services, diagnostics, and repairs in a timely fashion while communicating with the shop foreman and service advisor to promote an optimal customer experience All potential employment opportunities presented and advertised within this site are with independently owned and operated Kia Retailers. Applicants who seek employment through this site are applying for full-time employment with a participating Kia Retailer and not with KUS or ERS. All employment opportunities listed within this site are subject to applicable Federal and State statutes, rules, and regulations governing employment, which apply to each individual Kia Retailer’s specific location. KUS and ERS make no warranties (expressed or implied) or guarantees of employment to any individual seeking to participate in the Kia Veteran Technician Apprenticeship Program (VTAP). All employment decisions are at the discretion of the specific Kia Retailer to which an employment application is made, conditional upon meeting eligibility, skill, and experience requirements to participate in VTAP. Requirements Qualifications • Honorable Discharge, • Valid Drivers License from any state with a clean driving record, • Experience in a technical / mechanical field is required, • Must be willing to complete and pass drug screening and background checks Benefits Kia VTAP Apprenticeship Highlights: • Full-time employment with a participating Kia Retailer, • A program designed specifically for Veterans facilitated by Veterans!, • Participation in a one-year competency-based GI Bill approved apprenticeship leading to Kia Service Technician certification, • Access to all tools, equipment, vehicles, and training needed to complete the apprenticeship and certification process, • Eligible Veterans may apply for and receive a substantial GI Bill© Monthly Housing Allowance (MHA) during their apprenticeship

Job Description Our shop is located in GARLAND TX. For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in GARLAND TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned AUDI Master Guild Technician ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a AUDI Master Guild Technician to join our elite team. If you specialize in AUDI and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest AUDI and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with AUDI vehicles Strong specialization and experience with AUDI vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on AUDI vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc243564

Job Description Start Strong with Mavis: Eligible Automotive Tire Technicians receive weekly bonuses up to $800. Mavis Tires & Brakes at Discount Prices is seeking highly motivated Automotive Tire Technicians to join our team Mavis TODAY at our state-of-the-art automotive service and retail tire sales centers in the Basking Ridge, NJ area. With over 2,000 retail locations, Mavis is one of the largest tire sales and automotive repair chains in the United States. Mavis offers eligible Automotive Tire Technicians GUARANTEED WEEKLY BONUS PAYMENTS during the introductory period of employment, totaling up to $800! WHAT IS THIS GREAT CAREER OPPORTUNITY? As an Automotive Tire Technician, you're the backbone of our business. That's why you'll realize the rewards of a career with competitive, guaranteed base compensation PLUS additional earning potential through significant weekly bonus payments. The starting base rate of pay for an Automotive Tire Technician is negotiable. • NO EXPERIENCE IS NEEDED! We'll teach you everything you need to know through PAID TRAINING. To help introduce you to our weekly performance-based incentive programs and to give us an opportunity to coach you on our industry-leading processes, Mavis offers eligible Automotive Tire Technicians GUARANTEED WEEKLY BONUS PAYMENTS during the introductory period of employment, totaling up to $800!, • Automotive Tire Technicians install new tires and wheels and perform tire services -- like rotations, balancing and flat repairs -- to keep our valued customers' vehicles operating safely., • While providing best-in-class automotive service, you'll get weekly bonus payments tied to every single service you perform on top of your guaranteed hourly rate. Take the first step on an exciting career path by becoming an Automotive Tire Technician with Mavis! HOW DO I KNOW IF A CAREER WITH MAVIS IS RIGHT FOR ME? You'd be a great fit for the Automotive Tire Technician position if you: • like paid training and using proven processes;, • are motivated by commissions/incentive compensation;, • value reliability, punctuality and teamwork;, • love working in a fast-paced environment;, • enjoy staying active;, • are open to learning;, • care about meeting customer-promised delivery times and providing quality service;, • want to work for a growing company that promotes from within; and,, • love working in a safe, state-of-the-art environment. To be eligible for the Automotive Tire Technician position you must: • be at least 18 years of age;, • be legally authorized to work in the United States; and,, • be able to work 5 days each week. WHY WILL I LOVE WORKING WITH MAVIS? At Mavis, we understand that our people are our greatest asset. We value our team members' hard work and that's why proudly offer you benefits and rewards to support your lifestyle and well-being. As an Automotive Tire Technician, you can expect: • A safe, positive working environment;, • An excellent combination of fringe benefits, like health, vision and dental insurance;, • A 401(k) retirement savings plan with employer match;, • Paid vacations;, • Paid time off;, • Paid holidays;, • Life insurance;, • Paid on-the-job training; and,, • Opportunities for career growth and advancement What are you waiting for? APPLY NOW! Candidates can apply online at www.mavis.com/careers. OPEN INTERVIEWS ARE AVAILABLE 7 DAYS A WEEK! Simply walk in during store hours for an immediate interview. If you have any additional questions, you may call the Recruitment department toll-free # at 844-375-3995. For more information about Mavis, please visit www.mavis.com. Mavis is an Equal Opportunity Employer Job Posted by ApplicantPro

Job Description For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in DALLAS TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned Porsche technician ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a Porsche Master Technician to join our elite team. If you specialize in Porsche and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest Porsche and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with European vehicles Strong specialization and experience with Porsche vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on Porsche vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc237950

Job Description Our shop is located in GARLAND TX. For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in GARLAND TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned AUDI Master Guild Technician ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a AUDI Master Guild Technician to join our elite team. If you specialize in AUDI and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest AUDI and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with AUDI vehicles Strong specialization and experience with AUDI vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on AUDI vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc243555

Job Description For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in DALLAS TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned Porsche technician ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a Porsche Master Technician to join our elite team. If you specialize in Porsche and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest Porsche and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with European vehicles Strong specialization and experience with Porsche vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on Porsche vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc237924

Job Description For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in DALLAS TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned Porsche technician ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a Porsche Master Technician to join our elite team. If you specialize in Porsche and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest Porsche and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with European vehicles Strong specialization and experience with Porsche vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on Porsche vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc239750

Job Description Our shop is located in GARLAND TX. For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in GARLAND TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned AUDI Master Guild Technician ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a AUDI Master Guild Technician to join our elite team. If you specialize in AUDI and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest AUDI and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with AUDI vehicles Strong specialization and experience with AUDI vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on AUDI vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc243553

Job Description Our shop is located in GARLAND TX. For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in GARLAND TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned AUDI Master Guild Technician ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a AUDI Master Guild Technician to join our elite team. If you specialize in AUDI and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest AUDI and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with AUDI vehicles Strong specialization and experience with AUDI vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on AUDI vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc243559

Job Description For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in DALLAS TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned Porsche technician ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a Porsche Master Technician to join our elite team. If you specialize in Porsche and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest Porsche and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with European vehicles Strong specialization and experience with Porsche vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on Porsche vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc237943

Job Description For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in DALLAS TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned Porsche technician ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a Porsche Master Technician to join our elite team. If you specialize in Porsche and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest Porsche and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with European vehicles Strong specialization and experience with Porsche vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on Porsche vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc237940

Job Description For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in DALLAS TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned Porsche technician ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a Porsche Master Technician to join our elite team. If you specialize in Porsche and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest Porsche and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with European vehicles Strong specialization and experience with Porsche vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on Porsche vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc237936

Job Description For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in DALLAS TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned BMW Master Technician Mechanic ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a BMW Master Technician Mechanic to join our elite team. If you specialize in BMW and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest BMW and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with BMW vehicles Strong specialization and experience with BMW vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on BMW vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc241243

Job DescriptionBenefits: • Dental insurance, • Health insurance, • Vision insurance Title: Refrigeration Technician (Blue Seal Toxic) Location: Linden NJ (on-site) Must have: Blue seal Refrigeration Toxic License/Seal & Black Seal Steam License/Seal Job Description Maintains the following equipment: Ammonia refrigeration system, Freon packaged refrigeration units and building heating and air conditioning equipment, high pressure steam boiler systems, hot water generator, compressed air systems, electrical distribution equipment, building sprinkler systems, and any other supporting equipment as directed by management. Performs duties as assigned by the Facility Manager and/or Gold Seal Ensures continuous operation of all the facility utility systems and peripheral equipment to support the requirements of the production schedule and facility conditions. This requires proper coordination of all operations and maintenance utilities equipment. Coordinates both internal and external resources for maintenance of the facility. Assists in the record-keeping and training requirements for all components of the Process Safety Management/Risk (PSM/RMP management plans to achieve compliance with state and federal guidelines. Performs preventative maintenance on equipment to maintain in good working condition. Utilizes drawings, technical records, and vendor diagrams to complete Preventative Maintenance documents (PMs) related to machine overhauls and repairs. Performs other duties as assigned. WHAT'S ON THE MENU Provides technical analysis and services to provide real-time data on the status of refrigeration and operational equipment. Takes a leadership role on the emergency response team in the event of release of hazardous chemicals. Assures the ammonia compressors are operating safely and efficiently to reduce energy consumption. NECESSARY INGREDIENTS High school diploma or GED required. Knowledge of equipment set-up, functions, operating procedures, and preventative maintenance techniques. Basic knowledge in programmable logic controllers (PLCs) preferred. Demonstrated knowledge and application of best practices in maintenance and safety management. Knowledge of state and federal regulatory requirements as related to plant and utilities systems operations, safety, and environmental agencies. Knowledge of best available energy management practices and procedures. Ability to read and interpret work orders, operating manuals, and maintenance instructions in English. Ability to complete forms detailing maintenance work performed. Requires state of New Jersey licenses for operation of hazardous refrigeration and high-pressure steam systems (Blue & Black Seals). Requires valid drivers license

Job Title : Desktop Technician / Desktop Support Technician Location : Clark, NJ 07066 Duration : 12 Months Shift Details : On-Site Description: We are seeking an experienced and customer-focused Desktop Support Analyst where you’ll be the main IT contact for employees at an on-site IT kiosk. You’ll provide hands-on support and solve technical issues while delivering a great customer experience. What You’ll Be Doing: Provide face-to-face IT support for walk-in employees Troubleshoot hardware, software, and connectivity issues Set up and configure laptops, desktops, mobile devices, and AV equipment Support tools like Windows, Mac, Office 365, Teams, Adobe Manage user accounts (Active Directory / O365) Handle and track issues using ServiceNow ticketing system Support conference room tech, printers, and network basics Act as a go-to person for Level 1 team escalation and mentoring What We’re Looking For: 3–5 years of desktop support experience (Level 2 preferred) Strong knowledge of Windows, Mac, and Office 365 Experience with ServiceNow or similar ticketing tools Good understanding of basic networking (Wi-Fi, TCP/IP) Someone who is customer-focused, patient, and communicates clearly Organized and able to handle multiple issues in a fast-paced environment

Job Description Job Summary: We are seeking a skilled and dependable HVAC Service Technician to maintain, diagnose and repair residential and/or commercial heating, ventilation, and air conditioning systems. The ideal candidate has strong troubleshooting skills, customer service experience, and a commitment to quality workmanship. Key Responsibilities: Diagnose and repair HVAC systems, including air conditioners, furnaces, heat pumps, and ventilation systems Perform routine maintenance on residential and commercial HVAC equipment Install new HVAC systems and retrofit existing systems when needed Test and calibrate HVAC systems for proper functionality Interpret wiring diagrams and technical manuals Communicate effectively with customers to explain repairs, options, and system care Complete work orders, service reports, and maintain accurate records Comply with all local HVAC codes, safety regulations, and company policies Maintain tools and inventory in service vehicle Participate in on-call rotation and respond to after-hours service requests Qualifications: High school diploma or GED required HVAC certification or diploma from technical school (EPA 608 certification required) 2+ years of field experience preferred Valid driver’s license with clean driving record Strong diagnostic and mechanical skills Familiarity with HVAC tools, gauges, and diagnostic equipment Good communication and customer service skills Ability to work independently and as part of a team Physical Requirements: Ability to lift up to 50 lbs and work in confined spaces, attics, crawlspaces, or rooftops Comfortable working in varying weather conditions Standing, bending, kneeling, and climbing ladders for extended periods Benefits: (if applicable) Competitive pay + overtime Paid time off and holidays Commission 401(k) plan Ongoing training and certification support Company vehicle and uniform provided

Richmond Valley Veterinary Practice is a high-performing, community-trusted hospital with a 4.8 Google rating, offering a collaborative environment focused on evidence-based, high-quality care. The practice supports advanced diagnostics and provides access to internal specialty consultations, enabling strong clinical outcomes. Teammates benefit from meaningful investment in professional development and clear career growth opportunities, all within an efficient workflow designed to prioritize patient care. Located in Staten Island, the practice offers a strong community feel with convenient access to New York City. At Mission Pet Health, we do things a little differently! As part of our hiring process, we invite candidates to complete a short online assessment so we can better understand your skills and strengths. If you are being considered for the position, you will receive an e-mail from a Mission Pet Health recruiter with a link to complete the assessment at your convenience. Please be sure to check your spam or junk folder - sometimes these messages get filtered out. • Be the Director of First Impressions: You'll manage a multi-line phone system, greet clients with a positive attitude, and ensure every interaction reflects our commitment to compassionate care., • Ensure Seamless Care Coordination: You'll maintain accurate medical records, manage appointment schedules, and handle financial transactions, keeping the hospital running smoothly and efficiently., • Advocate for Pet Health: You'll be a key partner in pet wellness, educating clients on preventative care and other hospital services to ensure every pet gets the best care possible., • Embody Compassion and Empathy: You'll be a calming presence for clients, demonstrating empathy and respect in every situation and treating each pet like your own., • A passion for providing excellent customer service and a genuine love for animals., • Exceptional communication skills with the ability to manage stressful situations with good judgment and a positive attitude., • Strong organizational skills with the ability to prioritize and multitask in a fast-paced environment., • A collaborative, team-first mindset and the ability to work both independently and with direction., • Experience with veterinary software is preferred. A flexible schedule, including some weekends and holidays, is required., • Salary Range for this position is $17 - $22 per hour based on experience. As part of the Mission Pet Health family, you get the stability of a local practice backed by the comprehensive benefits and resources of a larger network. The focus is on investing in you, so you can focus on what you love. Note: Our comprehensive benefits package is designed to support you at every stage. Eligibility for specific benefits varies based on your role and hours worked. Competitive Compensation A competitive hourly rate or salary based on your experience and role. Health & Wellbeing We offer comprehensive coverage options including Medical, Dental, and Vision insurance, along with access to our Employee Assistance Program (EAP) for all teammates. Financial Security Plan for your future with our 401k retirement options and additional financial protection benefits like Life Insurance and Disability coverage. Commitment to Growth We support your career goals with opportunities for professional development, including educational assistance for qualified teammates to enroll in AVMA-accredited veterinary technician programs. The Power of a Network Join a nationwide community of over 20,000 veterinary professionals who share a passion for collaboration, career growth, and sharing best practices. Valuable Perks Enjoy discounted veterinary care for your own pets, access to an online discount platform, and free 24/7 access to doctors through Teladoc. Mission Pet Health was founded by veterinarians on the belief that local practices thrive with clinical autonomy, collaboration, and medical excellence. The organization provides world-class support to its 850+ hospital teams on a hyper-local basis so they can focus on what matters most: the medicine, their patients, and their team culture. Learn more at _. Driving the award-winning culture are the WAG values – Work Together, Amaze, and Grow. Mission Pet Health is veterinarian-led, people-focused, and on a mission to be the best place to work in veterinary medicine. We are proud to be recognized as a 2025 "Most Loved Workplace," ranked #2 in America's Top 100 and #1 in veterinary care. Reasonable Accommodations: Applicants with disabilities may be entitled to reasonable accommodation. Please contact benefits@mvetpartners.com with your request and contact information. EEO Statement: Mission Pet Health is an equal opportunity employer. We embrace diversity and are committed to creating an inclusive environment for all employees. #INDMI

Job Description Summary Bud's Goods of New Jersey is seeking a Packaging Technician to join our award-winning team. The primary role of this individual is to package and label dried flower as well as fill and package pre-rolls in accordance with pre-determined quotas and work orders. This role will also portion and package concentrates and oils per scheduled work orders. The Packaging Technician will be working with sophisticated packaging equipment and large volumes of packaged units. This will include set-up, operation, changeover, breakdown, and sanitation details of the equipment. The Packaging Technician reports to the Packaging Manager. This role is full-time in Linden, New Jersey, between 32-40 hours per week. The shift is 7:00am to 3:00pm with clock in as early as 6:45am. The facility is open Monday through Friday. The individual for this role enjoys consistency. This role works with a team to align and accomplish daily packaging work orders. Safety is a priority for our team. The packaging labs have air filtration and personal protective equipment is provided. The facility will have an appointed safety committee and a quality assurance manager. Job Duties • Perform packaging duties for the work orders assigned to the packaging lab, • Coordinate batch inventory and packaging materials on your work order with the Packaging Manager, • Operate high tech equipment which sorts and packages dried cannabis flower into pouches and jars, • Operate equipment to produce, package and label pre-rolls and other style joints, • Operate equipment to package oils and concentrates, • Operate equipment to print and apply labels to packages, • Case pack units ready for storage and shipment, • Track and record each step of the process and validate with equipment readings for consistency, • Attend to any units rejected by the packaging equipment, • Set up, changeover, and clean-up of sophisticated packaging equipment, • Breakdown and changeover of workstations per the sanitation and GMP processes of the facility, • Identify when equipment is not operating as intended, • Inspect and call-out any inconsistencies or issues with package labels, • Record activity that occurs throughout your assigned work orders, • Audit labels to ensure proper format and all information is present and in compliance with state regulations, • Work with a scale to accurately weigh product and track numbers, • Update inventory logs per batch and ensure inventory counts are accurate, • Maintain compliance with state regulations and company policies and SOPs, • Keep workstations clean and safe Core Competencies: • Attention to detail, • Production minded, • Excellent organizational and documentation skills, • Ability to work independently as well as with a team, • Dependable and hardworking attitude, • Punctual with reliable attendance, • Good personal hygiene, • Excellent hand-eye coordination, • Efficient and effective Working Conditions/Physical Demands: • Able to stand or sit for extended periods of time., • Able to lift up to 50 pounds, • Extensive use of hands, including repetitive movements Experience and Education: • 1+ years' experience in packaging or inventory-related role, • High school diploma/GED required (Associate's or Bachelor's degree preferred), • Basic understanding of mechanical packaging equipment, • Basic math skills, • Working knowledge of basic computer functions including e-mail and Excel Additional Requirements: • Must pass all required background checks, • Must be and remain compliant with all legal or company regulations for working in the industry, • Must be a minimum of 21 years of age, • Must be approved as a Registered Agent by the NJ Cannabis Regulatory Commission Benefits: We offer a competitive benefits package designed to support our employees' health and financial well-being. Full-time team members are eligible for medical, dental, and vision insurance after 90 days of employment. #ENGHP

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Competitive salary, • Dental insurance, • Health insurance, • Paid time off, • Vision insurance Job Title: Traffic Operator- Over Nights Salary: $30/hr-$35/hr Location: Northern New Jersey / New York City Company Overview: Drive Integration, LLC (DI) is a certified Disadvantaged Business Enterprise (DBE) and Women-Owned Small Business (WOSB) specializing in infrastructure design, network engineering, hardware/software integration, installation, and equipment vending services. We support agencies and businesses with innovative technology solutions and are proud to serve major clients including NJDOT, SEPTA, PennDOT, and others across the Mid-Atlantic region. Position Description: The technician will play a key role in monitoring closed-circuit TVs, radio communications, police and fire scanners, incident detector devices, and assess roadway conditions for traffic, weather, and overall operations. Provides traveler information in the event of an accident by activation of highway advisory radio devices and dynamic/variable message boards. Reports and notifies maintenance personnel of highway incidents or weather conditions. Notifies State Police of vehicles that must be removed that may pose a safety hazard. Performs other related duties as assigned. Responsibilities include: • Maintaining and troubleshooting network devices, camera systems, access control, and vehicle tag readers., • Performing firmware and configuration updates on network systems., • Incident coordination in ITSM tool, • Collaborating with support teams to ensure systems are fully functional and aligned with customer needs., • Remote technical support for systems users, • Explaining issues and solutions clearly to clients., • Building and maintaining customer relationships., • Performing additional duties as assigned.Requirements:, • Valid drivers license and clean driving record., • Relevant experience in traffic or road construction, or similar fields., • Availability for flexible shifts, including weekends and on-call rotation., • Physical capability to perform tasks that include bending, lifting up to 50 lbs., and working in confined spaces., • Proficiency in MS Word, Outlook, Excel, and Teams., • Knowledge of LAN/WAN fundamentals and troubleshooting experience with Windows and MS Office., • Strong English communication skills, with additional languages (Spanish, French, or German) as a plus. Drive Integration, LLC is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Job DescriptionDescription: A&M Industrial is a 70-year-old, family owned, leading local industrial distribution company looking for career-oriented individuals to fill critical positions on their sales and support team. The accelerated growth of the company has created full time opportunities in their headquarters in Rahway, NJ. The company offers medical and dental benefits as well as 401K, paid holidays and vacation. The A&M way is the fabric of our company and the essence of our value system. It guides our behaviors and practices, and defines how we relate to each other, our customers, and our business partners. This is who we are, the culture that drives our performance and extraordinary success. Contact us to learn more about the A&M way. Vendor Managed Inventory Technician is the ambassador to the customers on their route. They evaluate the inventory position of the products being managed, establishing replenishment quantities based on established parameters. They also restocks products as needed during the same visit. In the process, the VMI Technician builds relationships with these customers and ensures they are satisfied and informed on all of the latest products and services available. Essential Duties and Responsibilities: • Travel daily in your company-provided vehicle to support the implementation of Vendor Managed Inventory programs at customer locations in your territory., • Ensure appropriate customer stock levels, generate new orders and obtain customer approval for new orders as required., • Unpack orders, check accuracy of orders and put away stock at customer locations., • Provide communication and feedback to sales representatives and supervisor as appropriate to ensure full customer satisfaction., • Perform general housekeeping for service equipment and immediate area., • Use company smartphone app to process orders Physical Demands: The VMI Technician must be able to drive up to 5 hours/day and work in industrial environments. This position does require the ability to lift and carry boxes weighing an average of 50 lbs/box. Position Type/Expected Hours of Work/Pay/Benefits: This is a full-time non-exempt position. Hours of work are Monday through Friday, 8:00 am – 5:00 pm; with a 60-minute unpaid lunch. 40 hours per week. The salary for this position will be based on experience and certifications (if any). In addition to base salary, this position is eligible for performance-based incentives and all other benefits available to full time employees, including participation in health/dental/vision/group life/long-term-disability insurance plans, 401k, paid holidays and vacation. Other Duties: Please note this job description is not designed to be a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. A&M INDUSTRIAL, INC. is committed to equal employment opportunity. We will not discriminate against employee or applicants for employment on any legally recognized basis including, but not limited to veteran status, citizenship status, uniform service member status, race, color, religion, sex, national origin, age, physical or mental disability, creed, ancestry, marital status, domestic partnership or civil union status, gender identity or expression, affections or sexual orientation, pregnancy, genetic testing and information, atypical hereditary cellular or blood trait, or any other factor prohibited by law. Requirements: • Must have a valid driver’s license in good standing and a motor vehicle record acceptable to our insurance carrier, • Computer literacy, including familiarity with Microsoft Outlook, Word and Excel., • Excellent customer service and communication skills., • Basic arithmetic skills, • Ability to manage time and effectiveness, meet established goals and work effectively with other members of the team., • Follow company policies and procedures, • Demonstrate core values of ambition, innovation, integrity and teamwork., • Ability to present a professional image at all times to clients and vendors.

Required Skills & Experience • 3+ years of experience utilizing Revit and/or BIM tools in a telecom construction-related environment, • Strong understanding of telecom construction drawings, design documentation, and drafting standards, • Ability to interpret engineering designs, field markups, and specifications to produce accurate project deliverables, • ISP Design experience highly preferred Nice to Have Skills & Experience • Exposure to telecom, utility, or ISP (inside plant) infrastructure projects, • Experience preparing construction packages, as-builts, or project closeout documentation, • Familiarity with coordinating across field teams, engineers, and project managers, • Experience working in fast-paced, multi-project environments with tight deadlines, • Willingness and ability to travel to project sites for field verification and coordination Job Description Insight Global is looking for a BIM Technician to join their client's growing team in West Point, PA or Rahway, NJ. This individual will spend their day creating and updating detailed telecom construction drawings using AutoCAD, Revit, and BIM tools to support telecom infrastructure and construction projects. They will interpret field markups, engineering designs, and specifications to ensure all drawings accurately reflect current site conditions and project requirements. The designer will collaborate closely with project managers, engineers, and field teams to incorporate feedback, manage revisions, and keep documentation up to date. They will also help prepare construction packages, as-built drawings, and closeout documents while ensuring all deliverables meet quality standards and timelines.

Client Overview Our client is an established paint company dedicated to producing high-quality products through innovation and technical excellence. They are seeking an Entry Level Laboratory Technician to join their laboratory team and support the development and testing of paint products. Salary/Hourly Rate $20/hr Position Overview The Entry Level Laboratory Technician will work in the laboratory creating paint samples while evaluating and testing paint properties. This role offers an excellent opportunity for a recent graduate or early-career professional to gain hands-on laboratory experience in a manufacturing environment.The ideal Entry Level Laboratory Technician will have completed chemistry laboratory coursework, possess strong attention to detail, and be committed to maintaining accurate documentation and laboratory procedures while supporting daily testing and product development activities. Responsibilities Of The Entry Level Laboratory Technician • Produce paint samples for laboratory testing and evaluation., • Perform tests and evaluate paint samples according to established laboratory procedures., • Operate and maintain laboratory equipment., • Maintain laboratory records, documentation, and inventory., • Maintain a clean and organized workspace in accordance with standard laboratory practices and procedures. Required Experience/Skills For The Entry Level Laboratory Technician • Completed chemistry laboratory courses., • Experience following laboratory procedures and protocols., • Ability to maintain accurate documentation and laboratory records. Preferred Experience/Skills For The Entry Level Laboratory Technician • 0-2 years of experience as a Laboratory Technician., • Ability to work effectively in a team-oriented laboratory environment. Education Requirements • Associate's or Bachelor's degree in Chemistry, Chemical Engineering, Biology, Biochemistry, or a related scientific field. Benefits • Benefits through Atrium include medical, dental, vision insurance, short- and long-term disability coverage, a 401(k) plan, paid holidays, and paid sick time.

Job Description The Behavior Technician plays a crucial role in delivering high-quality behavioral services across multiple settings, including home, clinic, and school environments. Reporting to a BCBA Supervisor or Clinical Director, the technician frequently travels to client sessions to implement intervention plans, collect data, and collaborate with clinical teams to support client progress. Responsibilities • Collect and record accurate behavioral data during sessions, • Implement intervention plans as directed by supervisors, • Generate detailed behavior reports to monitor client progress, • Collaborate with supervisors and team members for optimal service delivery, • Document session activities and maintain organized records Preferred Qualifications • Knowledge of Applied Behavior Analysis (ABA) principles, • Proficiency in data recording and analysis, • Experience with behavioral intervention techniques, • Strong communication and observation skills, • Ability to collaborate effectively within a team, • Excellent time management and organizational abilities, • Empathy, patience, and strong problem-solving skills

Job DescriptionDescription: As a Driver at Lewis Environmental, you will be a critical part of our team, responsible for driving commercial vehicles to support a variety of Environmental Services projects. Your role will include transporting hazardous and non-hazardous materials, responding to environmental emergencies, and ensuring the safe and efficient operation of all vehicles. This position offers the opportunity to make a significant impact by ensuring safety and compliance in our day-to-day operations and emergency response efforts. Requirements: Key Responsibilities Vehicle Operation: Safely drive commercial vehicles to support a wide range of environmental services projects. Compliance: Maintain all DOT and OSHA certifications required for operating a CDL truck, including transporting hazardous and non-hazardous materials. Safety: Follow all company safety rules and OSHA regulations. Attend required safety training programs to ensure a safe working environment. Emergency Response: Participate as a member of the On-Call Emergency Response Team, responding to environmental spills and other emergencies. Vehicle Maintenance: Perform pre- and post-trip vehicle inspections and ensure all equipment is maintained in excellent working condition. Regulatory Adherence: Ensure compliance with all regulations regarding the transportation of hazardous and non-hazardous waste. Team Collaboration: Perform Service Technician duties as part of our team-based operations philosophy, assisting in the completion of various environmental tasks. Qualifications Experience: Minimum 2 years of experience as a CDL driver, preferably with hazardous material handling experience. Licensing: Valid CDL license with Hazmat and Tanker endorsements required. Motor Vehicle Record: Clean Motor Vehicle Record (MVR) and successful completion of a criminal background check, including an acceptable FMCSA record. Safety & Compliance: Strong commitment to safety, quality, and compliance with all industry regulations. Training: 40 hours of OSHA and related safety training is a plus, though training will be provided. Availability: Willingness to work flexible hours, including being on call during weekends and after hours. Physical Requirements Vehicle Operation: Ability to sit for extended periods while operating a motor vehicle. Manual Labor: Ability to lift up to 60 lbs. and perform manual labor tasks as part of daily duties. Weather Conditions: Ability to work in severe weather conditions, both hot and cold. Confined Spaces & Safety Gear: Ability to work in confined spaces and wear a respirator as needed. Clean shaven requirements for respirator use. Physical Effort: Ability to stand and exert physical effort performing manual labor 50-70% of the time. Noise Exposure: Able to tolerate exposure to moderate noise levels. Why Join Us? At Lewis Environmental, we are dedicated to fostering a supportive and inclusive environment where safety, teamwork, and professional development are prioritized. We offer opportunities for growth and provide comprehensive training and support to ensure that our team members succeed and thrive. Equal Opportunity Employer Lewis Environmental is an Equal Opportunity Employer and is committed to building a diverse workforce. We do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. All qualified applicants will receive consideration for employment without regard to any protected characteristic.

About Diversified: Diversified is a global leader in audio visual and media innovation, recognized for designing and building the world's most experiential environments. Our award-winning team specializes in delivering solutions for the most complex, large-scale and immersive installations. Serving a global clientele that includes major media organizations and retailers, sports and live performance venues, corporate enterprises, and government agencies, Diversified partners with clients to create spaces that bring people together and keep them coming back. What to Expect: At Diversified, we're on a mission to create a world without boundaries, where technology enables all people to connect and experience the moments that matter, wherever they choose to be. With clients spanning the globe and an exciting pipeline of projects across industries, Diversified offers more than just a job. We offer a career path with the flexibility to grow personally and professionally, wherever your ambitions take you. As a Diversified associate, you'll dive headfirst into big, complex, and rewarding projects that push the boundaries of what's possible. Plus, you'll enjoy a flexible work environment, competitive compensation and benefits, and a culture that celebrates diversity and inclusion. IF YOU CAN DREAM IT, YOU CAN DO IT AT DIVERSIFIED. How You'll Contribute: The Project Operations Field Implementation Manager (Calgary) is responsible for onsite guidance and oversight of multiple specific projects. Oversight of 10- 15+ Diversified Technicians subcontractors at any given time, is responsible for enforcing standards and processes that increase the quality, velocity, and efficiency for the team. This position is the onsite point for customer escalation and the face of Diversified during the implementation phase on key projects. This individual will work with PMO team and Engineering, ensuring Project Operations is aligned with the needs of our clients and the business unit needs. Location: Calgary, Canada What You'll Do: Primary Duties and Responsibilities: • Act as Site Superintendent on high profile projects, acting as a single point of contact for onsite teams (Field Engineers, Technicians, Subcontractors, etc.); passing and filtering information to the Project Manager., • Assist in addressing performance of onsite resources and associates., • Training - Termination, mechanical, client interface and other aspects of Diversified installation standards., • First point of escalation for Field Issues with the client., • Empowered to defuse and resolve onsite client issues., • Verification and enforcement for onsite performance and productivity standards, providing feedback for reviews and training plans., • Provide onsite support for integration issues., • Assist in development and deployment for Installation processes and standards., • Recommends training for future growth and development of team to ensure best in class., • Provide a consistent level of technical performance as well as flexibility in work schedule. This position requires periodic overtime, weekends and may require overtime for extended periods to meet deadlines., • Able to complete assignments in accordance with or better than established task durations as well as estimate task durations to meet assigned deadlines. Provides daily feedback to Project Manager., • Assist in developing growth plans for both process and operations staff to help ensure long term success., • Helps develop and ensures compliance in Quality Assurance program., • Field implementation and tracking of departmental goals and objectives., • Responsible for site activities related to Safety, Quality Control and QA., • Coordinates activities for service to ensure all systems requiring support are successfully included., • Final verification of preparedness for site activities., • Support fleet and/or delivery of tools and materials for field., • Maintain and track tooling/ test gear., • Site Surveys for projects and sales support., • Verification for commissioning readiness., • Review daily field reports for content and format. Complexity: • Verification and Implementation of standards in how Diversified deploys., • Immediate point of escalation for job sites. Decision Making Authority: • Feedback on Hires/Fires/Reviews., • Removal of personnel from jobsites., • Standard training and enforcement for Contractors., • Timesheet/PTO/Expense Verification. Physical Working Environment: • Ability to visit multiple jobsites in assigned geography., • Must be able to lift 50 lbs. Travel: Frequent travel by car and occasional airplane trips are required. Employee must possess a valid Alberta driver's license. Employees will be required to use their own vehicle and will be reimbursed for mileage at the current corporate rate. Local travel to job sites (within a 2 hour driving distance each way) will make up 70-90% of the time. Occasional travel by airplane for out-of-town projects may be required What You'll Bring: Required Skills/Qualifications • 3+ years' experience as a senior or lead technician, or experience as a site superintendent with another company., • Familiarity with a wide range of audio, video and networking equipment., • High level of experience in construction environments, • Knowledgeable of low voltage electrical concepts., • Possess advanced AV installation skills., • Good verbal communication skills and good customer service skills., • Ability to diagnose, troubleshoot and resolve technical problems., • Preferred candidates hold CTS or CTSI certifications. What We Offer: Along with competitive compensation, you will be eligible for the following benefits: • Medical and dental plan options to suit your family's needs, • Basic Life, AD&D, Short-Term and Long-Term Disability Insurance, • Healthcare and Dependent Care Flexible Spending Accounts (FSA), • Paid Time Off and Paid Holidays, • Commuter Benefits, • And much more To learn more about becoming part of the Diversified team, visit us at _ or email us at careers@onediversified.com. Diversified is an equal opportunity employer committed to fostering an inclusive and diverse workplace. All aspects of employment will be based on job requirements, individual qualifications, merit, performance, and business need. We do not discriminate based on race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, or any other protected characteristic under applicable law. We believe in fair and equitable hiring practices and strive to create an environment where all individuals feel valued and empowered. If you require a reasonable accommodation to participate in the application or interview process due to a disability, please contact careers@onediversified.com so we can assist you. Our compensation ranges reflect the cost of labor across several geographic markets. The pay details below range from our lowest geographic market up to our highest geographic market. Pay is based on several factors including market location and may vary depending on job-related knowledge, skills and experience depending on the position offered, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits.

The Maintenance Technician III supports the FedEx industrial maintenance of material handling to complete preventative and predictive maintenance and repair of material handling systems. Will utilize prescribed processes as they relate to mechanical power transmission, electrical, PLC/controls, welding/fabrication and other industrial maintenance related systems. May troubleshoot component and systems issues. ESSENTIAL FUNCTIONS • Under minimal supervision, provides preventative and predictive maintenance, troubleshooting and repair of material handling systems through demonstrated proficiency in mechanical power transmission and electrical with working knowledge of PLC/controls and welding/fabrication, • Adheres to all applicable safety standards and promotes a safe work environment by attending safety meetings and required trainings and addressing all safety concerns, • Will interpret electrical or mechanical schematics, manufacturer's manuals and engineering specifications to troubleshoot, diagnose and repair system faults and failures or determine escalation, • Responds to sort calls to diagnose problems and make repairs, • Ability to utilize the Enterprise Asset Management (EAM) software to enter and retrieve prescribed data, • Complex skills required in diagnosing and troubleshooting mechanical, electrical and/or PLC/controls failures, • May rely on higher level Technicians in complex control systems issues, • May begin to read PLC and have the ability to burn EEPROMs, • May begin to assist lower level technicians, • May begin to develop scopes of work and project plans for small scale projects to be executed at a local level, • May be required to work a flexible schedule including all days and shifts as the business need dictates., • Performs other duties as assigned Examples of what you can expect to learn in the Tech III level (does not include all areas/responsibilities). Mechanical • Understand power transmission concepts, such as gear ratios, service factor, horsepower and frame size to repair/replace a failed gearbox and/or motor when the correct replacement parts are not available, • Understand mechanical design concepts to be able to replace failed pulleys and bearings with replacements that don't match design without impacting performance of a conveyor (speed, torque, etc.), • Can read, interpret and create or modify mechanical drawings Electrical • Use a digital multimeter to resistance test de-energized circuits., • Troubleshoot and diagnose both the power and the control branch of motor controls circuits., • Read, interpret and create or modify electrical drawings/schematics PLC/Controls • Go online with PLC processors to aid in troubleshooting, • Burn EEPROMs, • Understand PLC networks, such as ControlNet, DeviceNet, etc. Welding or Fabrication • MIG, stick and TIG weld in all positions., • Understand difference between structural and non-structural welds and when to apply them, • Repair broken components where factors such as position or load may impact the repair, such as motor mounting plates or conveyor legs., • Use vertical mill/drill and other machining tools MINIMUM EDUCATION • High School Diploma or GED required, • Certificates in Industrial Maintenance/Mechatronics, electrical or mechanical trade or related area and an associate degree in a related area preferred. MINIMUM EXPERIENCE • Four (4) years experience in Industrial Maintenance with proficiency in knowledge and demonstrated skills in mechanical power transmission, electrical and working knowledge of PLC/Controls and welding/fabrication skills through job experience, related military experience and/or related education required., • Multiple certificates and degrees may be assessed by manager and HR to determine relevancy to minimum qualifications and experience KNOWLEDGE, SKILLS AND ABILITIES • Ability to follow procedures as directed by work orders or high-level technicians/management, • Ability to interpret electrical or mechanical schematics, manufacturer's manuals and engineering specifications to troubleshoot, diagnose and repair system faults and failures or determine escalation, • Ability to utilize the Enterprise Asset Management (EAM) software to enter and retrieve prescribed data, • Ability to solve mechanical or electrical problems, which may include understanding of engineering formulas, • Ability to diagnose mechanical power transmission, electrical or PLC/controls issues by troubleshooting at multiple component and system level, • Effective verbal and written communication within own department to peers, managers, and outside vendors to convey technical data and needs, • Need to collaborate successfully with department, operations, vendors and support teams that failures or projects may require, • Software skills, including Microsoft Office suite and other web-based applications, • Possess time management and organizational skills JOB CONDITIONS • Will need to use hand tools and possibly power tools, • May be working in hot or cold temperatures, • May need to stand, walk, bend, stoop and squat Preferred Qualifications: Pay Transparency: Pay: Main tech I: 0-2yrs exp $20.35 - $31.73/hr; Main tech II:2-3yrs exp $22.50 - $34.97/hr; Main tech III:4-5yrs exp $24.75 - $38.43/hr; Main tech Spec:6+yrs exp $30.75 - $47.47/hr - This job is eligible for an additional 25% based on location. Additional Details: For details on our comprehensive benefits, click _. Federal Express Corporation is an Equal Opportunity Employer including, Vets/Disability. Reasonable accommodations are available for qualified individuals with disabilities throughout the application process. Applicants who require reasonable accommodations in the application or hiring process should contact _. Applicants have rights under Federal Employment Laws: • _, • _, • _, • _ E-Verify Program Participant: Federal Express Corporation participates in the Department of Homeland Security U.S. Citizenship and Immigration Services' E-Verify program (For U.S. applicants and employees only). Please click below to learn more about the E-Verify program: • E-Verify Notice (_), • Right to Work Notice () / () Pay Transparency: The compensation listed reflects the pay range or rate of pay reasonably expected for this posted position at the posted location or locations. If this opportunity includes multiple job levels, the pay information represents the ranges for each level in that job family. Actual pay is determined by several job-related factors permitted by law and relevant to the position, including, but not limited to, experience relative to the job, tenure, market level, pay at the location for this job, performance, schedule, and work assignment. In California, the compensation listed reflects the range or rate of pay reasonably expected for this posted position upon hire. In New Jersey, any compensable Security and Walk time will be paid to non-exempt/hourly employees at the state minimum wage.

Job DescriptionKelly Science and Clinical FSP is currently seeking a Sr. GMP Technician for a long-term engagement in Rahway, NJ with one of our Global Pharmaceutical clients. This position is onsite. This person will join our Kelly FSP (Functional Service Provider) division, a managed solution provider and business unit of Kelly Services, Inc. This role is full-time and is offering full benefit options. As a Kelly FSP employee you may be eligible for Medical, Dental, Vision, 401K and a variety of other benefits to choose from. You may also be eligible for paid time off, including holiday, vacation, and sick/personal time. Senior GMP Technician General Requirements • Following local procedures, • Completing required training, • Adhering to GMP requirements for documentation of activities, • Cleaning, sanitizing, and breaking down equipment, • Operating GMP manufacturing/cleaning equipmentEducation, • High School Diploma, • Certifications: Not required, but a certification in pharm processing would be beneficialExperience, • 2-4 years’ experience in a GMP facilityResponsibilities, • Prepare the appropriate disinfectants as per SOP., • Understand the dwell time for all cleaning agents/chemicals., • Cleaning of the processing rooms following manufacturing processes and as required per procedure. Remove all trash/biohazard waste bags from the MFG area., • Stocks all gowning materials in all air locks and locker rooms., • Execute cleaning of major and minor pieces of equipment and ancillary equipment, • Disassembly and reassembly of equipment per procedure (as required), • Perform cleaning activities on the isolators and filling line, • Perform cleaning verification activities to support cleaning validation, • Accurately documenting activities in the appropriate logbooks., • Able to work with a respirator during special assignments, if required., • Maintain materials inventory., • Report any unexpected observations to area management., • Perform tasks under minimal supervision, and within tight timelines to meet production schedule., • Coordinate with engineers & maintenance personnel in facility upkeep, • Author and revise SOPs and logbooks., • Reviews logbooks at the end of the shift to ensure proper GDP.Requirements, • Good interpersonal skills and attention to detail., • Previous experience in cleaning the GMP area is required., • Must be able to follow GMP regulations during operations, including adherence to written procedure and contemporaneous documentation., • Must be able to record data accurately and legibly., • Ability to perform in a team setting in a controlled environment for long periods of time.Physical Requirements, • Physically capable of donning and wearing cleanroom/protective gowning and equipment, including but not limited to gowning, goggles, face shields, and protective gloves. PPE is essential for the health and safety of employees, • Perform operations within ISO Class clean rooms, • Employees must be able to lift and/or move up to 40 pounds, • Must be able to squat, bend, kneel, and or reach for 40% of a shift, • Must be able to stand, walk, and/or move about for 40% of a shift As part of our promise to talent, Kelly supports those who work with us through a variety of benefits, perks, and work-related resources. Kelly offers eligible employees voluntary benefit plans including medical, dental, vision, telemedicine, term life, whole life, accident insurance, critical illness, a legal plan, and short-term disability. As a Kelly employee, you will have access to a retirement savings plan, service bonus and holiday pay plans (earn up to eight paid holidays per benefit year), and a transit spending account. In addition, employees are entitled to earn paid sick leave under the applicable state or local plan. Click here for more information on benefits and perks that may be available to you as a member of the Kelly Talent Community. Why Kelly® Science & Clinical? Kelly Science & Clinical is your connection to premier scientific and clinical companies looking to hire industry experts just like you. Our team creates expert talent solutions to solve the world’s most critical challenges. Every day, we match science professionals with dream jobs that fit their skills, interests, and career goals-it’s the way we think job searching should be. Nearly 100 percent of our science recruiters have a professional background and education in science, so we know a thing or two about the science market and how to get your expertise noticed. About Kelly Work changes everything. And at Kelly, we’re obsessed with where it can take you. To us, it’s about more than simply accepting your next job opportunity. It’s the fuel that powers every next step of your life. It’s the ripple effect that changes and improves everything for your family, your community, and the world. Which is why, here at Kelly, we are dedicated to providing you with limitless opportunities to enrich your life-just ask the 300,000 people we employ each year. Kelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California’s state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Kelly may use AI-powered tools during the recruitment and hiring process. For full details, including how Kelly uses AI, your rights, and how to request a reasonable accommodation, visit the Recruitment Artificial Intelligence Notice.

Job Description Overview Diesel Technician/Mechanic – Keasbey, NJ. Weekly Pay | Full Benefits within 30 Days Amerit Fleet Solutions, a leader in fleet maintenance across the U.S., is hiring a skilled Diesel Technician/Mechanic to join our team in Keasbey, NJ If you enjoy troubleshooting mechanical issues and keeping fleet vehicles running reliably, this is a great opportunity to grow your career with a stable national company. Our role is onsite, outdoors, working out of our Mobile Truck at this Hughson location. Pay & Schedule Pay Frequency: Weekly pay – every Friday Schedule: Tuesday - Saturday: 7:00 am - 3:30 pm Pay: $25.00 - $34.00 / Hr DOE Why Technicians Choose Amerit ✔ Weekly Pay – Reliable paycheck every Friday ✔ Benefits Start Fast – Medical, dental, vision within 30 days ✔ 401(k) Match – Plan for your future ✔ Paid Time Off – Vacation, holidays, and sick time ✔ Boot Allowance & Safety Gear Reimbursement ✔ Training Through Amerit University ✔ ASE Certification Reimbursement & Bonuses ✔ Employee Referral Bonuses (Up to $500) ✔ Career Advancement Opportunities Nationwide What You’ll Do • Perform preventive maintenance and repairs on medium to heavy-duty fleet vehicles, • Diagnose mechanical and electrical issues, • Conduct inspections to ensure vehicles meet safety and compliance standards, • Accurately document repairs and complete work orders, • Maintain a clean and organized work area, including your tools and equipment, • Follow all safety procedures and company policies, • Collaborate with supervisors and team members to support fleet operations What We’re Looking For • 5+ years’ of hands-on experience performing diesel vehicle maintenance and repairs on Switchers., • Strong diagnostic and troubleshooting skills, • Valid driver’s license, • Ability to own and maintain the personal tools and toolbox required for the role, • Ability to work effectively both independently and as part of a team, • Willingness and ability to meet the physical demands of the position (detailed below), • Ability to successfully pass a DOT physical if required for the role Working Conditions This role involves working in a mobile and or shop environment that may include exposure to dust, diesel fumes, noise, and mechanical irritants such as oils and greases. Technicians must be able to perform essential functions that include lifting heavy objects, accessing tight spaces, and bending, stooping, crouching, or crawling as needed to complete repairs. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Ready to Join a Growing Team? Apply today to join Amerit Fleet Solutions and build a career with a company that values safety, reliability, and skilled technicians. https://www.ameritfleetsolutions.com/careers/easy-apply #Mechanic #Hiring #DieselMechanic #NowHiring #DieselTechnicianCareer #MechanicJobs #DieselTechnician #HiringDiesel #HiringNow #Natashaishiring #CallNatasha #Call9253229665 INDNP

Job Description Temporary Surgical Technician - 13 weeks Job Summary: We are seeking a highly skilled and experienced Temporary Surgical Technician to join our surgical team. The ideal candidate will provide essential support to surgeons and other medical personnel during surgical procedures. This role requires a strong understanding of aseptic technique, surgical instrumentation, and the ability to work effectively in a fast-paced environment. The Temporary Surgical Technician will be directly accountable for preventing hospital-acquired infections, ensuring the operating room is properly prepared, and responding effectively to emergency situations. Job Specific Competencies: • Infection Control: Directly accountable for preventing hospital-acquired infections related to hand-hygiene performance of self and staff., • Surgical Assistance: Under direct supervision, assists the operating surgeon in the care of patients in surgery and performs assigned selected duties., • Surgical Preparation: Prepares for surgery in an acceptable timeframe. Prioritizes workload and prepares for the specific operative procedure utilizing appropriate Preference Care/Case Cart Requisition., • Aseptic Technique: Demonstrates acceptable standards of aseptic technique when scrubbed and a working knowledge of the surgical procedure, instrumentation, supplies, and equipment needed., • Emergency Response: Responds appropriately to any unanticipated or emergency situation that may arise intra-operatively and assists with CPR of patient during cardiac arrest., • Equipment Management: Utilizes equipment properly, according to manufacturer's recommendations and adhering to OR protocols. Ensures OR is stocked and ready for each case. Assures equipment is cleaned and maintained for use by the next staff member and/or patient., • Hazardous Materials: Follows the hospital's policy and procedures on discarding contaminated and hazardous materials., • Compliance: Maintains established hospital policies, procedures, directives, quality assurance, safety, environmental, and infection control standards appropriate to this position., • Other Duties: Performs other duties as assigned within the scope of practice. Education + Experience Requirements: • High School Diploma or Equivalency., • Graduate of an Accredited Surgical Technology Program approved by: CAAHEP - Commission on Accreditation of Allied Health Education Programs or ABHES - Accrediting Bureau of Health Education Schools., • Minimum of 3 years of recent surgical technician experience in an operating room setting. Credentials + Qualifications: • BLS certification by the American Heart Association (AHA)., • Surgical Technician Certification (CST) authorized by the National Board of Surgical Technology and Surgical Assisting (NBSTSA). Certification must be current and maintained., • Must be able to provide proof of certification and experience., • Must be able to provide professional references., • Must be able to work temporary assignments. 4x10s + on call 80 hours

Job Description For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in DALLAS TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned BMW Master Technician Mechanic ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a BMW Master Technician Mechanic to join our elite team. If you specialize in BMW and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest BMW and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with BMW vehicles Strong specialization and experience with BMW vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on BMW vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc241216

Job DescriptionDescription: Join Our Growing Ophthalmology Team as an Ophthalmic Technician! Our established multi-specialty Ophthalmology group is seeking a skilled professional to join our friendly and dedicated team. If you're passionate about providing exceptional patient care and eager to grow in a supportive environment, we want to hear from you! Your Impact: • Elevate patient care: Work closely with our ophthalmologists to gather comprehensive patient information, ensuring accurate diagnoses and personalized treatment plans., • Master ophthalmic testing: Conduct thorough preliminary examinations, including visual acuity, pupillary responses, and more., • Perform advanced diagnostics: Administer a range of diagnostic tests, such as OCT, perimetry, and ophthalmic photography., • Assist in surgical procedures: Support ophthalmologists during minor surgeries, laser procedures, and crosslinking., • Streamline patient flow: Efficiently manage patient flow in clinic and imaging rooms, collaborating with clinical staff., • Administer eye drops: (Certification Required), • Contribute to clinic efficiency: Perform clinical and administrative tasks, ensuring a smooth and organized workflow. What You'll Bring/Requirements: • A passion for patient care and a commitment to excellence., • Exceptional attention to detail and strong organizational skills., • Excellent communication and interpersonal abilities., • Ability to thrive in a fast-paced, team-oriented environment., • Proven experience as an Ophthalmic Technician., • Knowledge of medical office procedures., • Ability to perform indirect activities, administrative tasks and any other assigned duties that contribute to the efficient & high-quality performance of the medical practice., • High School Diploma or equivalent. Bonus Points: • Certified Ophthalmic Assistant (COA) Certification. Key Skills: • Reliability and a strong work ethic., • Ability to work collaboratively with a diverse team., • Proficiency in data entry and typing., • Outstanding customer service skills. We Care: We prioritize patients, colleagues, and families with compassionate, leading care and treat all with dignity and respect. We Collaborate: We work together with patients, seeking diverse input to share and grow innovative ideas. We Elevate: Committed to excellence, we exceed expectations by delivering leading eye care research, innovation, education, and outreach. Refocus is an equal opportunity employer and we value diversity. Requirements:

Job DescriptionPosition: CVOR Surgical TechnologistLocation: Manhattan, NY 10029Shift: 8:00 AM – 4:00 PMDuration: 13 Weeks (Extension Possible)Compensation: Local: $1,900 – $2,300/week Travel: $2,400 – $2,900/week Note: "MUST HAVE 2 YRS MIN. WORKING IN AN OPERATING ROOM AS AN OR TECHNICIAN. MUST HAVE CARDIAC OR EXPERIENCE" Job Summary The Surgical Technologist is responsible for assisting in surgical procedures by performing scrub and circulating duties under the direct supervision of a Registered Professional Nurse. This role requires expertise in operating room protocols, aseptic techniques, and surgical instrumentation, particularly in cardiac procedures. Key Requirements Minimum 2 years of experience as an OR Technician Mandatory Cardiac OR (CVOR) experience CST (Certified Surgical Technologist) certification required Completion of an accredited CST training program High School Diploma required Key ResponsibilitiesScrub Duties Perform surgical scrub, gowning, and gloving procedures Maintain strict aseptic technique at all times Prepare sterile instrument tables and supplies based on procedure Assist in draping patients and surgical areas Anticipate surgeon needs (instruments, sutures, sponges, etc.) Maintain accurate counts of instruments, needles, and sponges Handle specimens according to protocol Assist with dressings and drainage systems Ensure proper disposal of contaminated materials and reprocessing of instruments Circulating Support Duties Assist RN with circulating functions Prepare and organize surgical supplies and equipment Ensure proper patient positioning and safety Maintain sterile environment and monitor OR traffic Assist with patient transfer and post-procedure care Support room turnover and preparation for next procedure Medication & Safety Support Assist RN with medication preparation under supervision Label all medications appropriately Verbally confirm medication details before administration Retain medication containers until patient leaves OR Do not handle narcotics or controlled substances Operational Support Assist with patient transport as needed Monitor inventory levels and notify leadership of changes Maintain organization of OR and sterile storage areas Support updates to preference cards and equipment needs Skills & Competencies Strong knowledge of surgical procedures and sterile techniques Excellent communication and teamwork skills High attention to detail and patient safety Ability to work in a fast-paced, high-pressure environment Physical stamina and manual dexterity Work Environment Exposure to a wide range of surgical procedures and technologies Fast-paced operating room setting For more details reach at Aditi.sharma@navitashealth.com or Call / Text at 516-587-6677. About Navitas Healthcare, LLC: It is a certified WBENC and one of the fastest-growing healthcare staffing firms in the US providing Medical, Clinical and Non-Clinical services to numerous hospitals. We offer the most competitive pay for every position we cater. We understand this is a partnership. You will not be blindsided and your salary will be discussed upfront.

Job DescriptionJob Title: Medical Representative (Carteret, NJ) Job Description The Workplace Health & Safety (WHS) team is deeply committed to the safety and well-being of our people. WHS sets the strategic direction to provide resources, best practices, and safe environments to proactively manage the health and well-being of our workforce. We are seeking an experienced and dynamic Onsite Medical Representative (OMR) to join our team. In this position, you will work closely with the WHS site manager, WHS specialist, and occasionally the Injury Prevention Specialist (IPS). Your role will include attending weekly associate safety committee meetings and engaging with all new hires through daily interactions. Additionally, the OMR will participate in weekly case management review meetings as necessary. As an OMR, you will independently assess and administer first aid while offering guidance to Associates (AAs) on both occupational and non-occupational injuries or illnesses. You should be passionate about learning and advocating health and wellness principles to consistently support AAs on a daily basis. You will refer care to outside medical providers as needed and learn about OSHA regulations, risk, and analysis. The OMR will function as part of the larger onsite team, assisting with all first aid needs and supporting safety operations as needed. Responsibilities • Provide first aid support and make referrals to outside medical providers as necessary., • Minimize the risk of injury through awareness, education, and proactive engagement., • Maintain all records of care provided to Associates., • Coordinate and maintain the workers’ compensation and return-to-work programs for work-related injuries., • Provide daily activity logs and end-of-shift reports., • Engage with Associates and leadership on the operations floor to provide coaching regarding observed at-risk work habits., • Maintain a clean working environment and ensure appropriate medical supply inventory is maintained., • Participate in training and certification to facilitate first aid, CPR, and AED certification classes., • Maintain all first aid, CPR, AED credentials., • Work flexible shifts, which could include days, nights, holidays, and/or weekends., • Assist with random saliva drug testing protocols., • Maintain effective care delivery in emergencies and assist emergency response at the site.Essential Skills, • High School or equivalent diploma., • Current valid Basic Life Support (BLS) certification by an approved emergency cardiac care (ECC) provider., • Current valid Emergency Medical Technician (EMT) or Paramedic Certification from the Department of Health or the National Registry of Emergency Medical Technicians (NREMT).Additional Skills & Qualifications, • Certified to teach first aid, CPR, and AED training from the American Heart Association or American Red Cross., • Proficient in Microsoft Office., • Experience with an industrial wellness program., • Experience managing musculoskeletal disorders, ergonomics, and coaching on body mechanics., • Demonstrated work experience with OSHA regulations and Workers Compensation., • Proficient in digital record management., • Experience in the Military as a Combat Medic (U.S. Army), Field Medic (U.S. Army), Healthcare Specialist (U.S. Army), Hospital Corpsman (U.S. Navy), or Aerospace Medical Service Technician (U.S. Air Force).Work Environment There is potential for an extra 10 hours of overtime a week depending on coverage. The training schedule will be Monday through Friday 8 am - 4:30 pm for the first two weeks. The schedule after training will be Monday to Friday from 3 PM to 11 PM. The work environment may include variable noise levels and exposure to different temperatures and weather conditions as delivery stations include outside loading departments. The role may require lifting up to 49 pounds and frequently pushing, pulling, squatting, bending, and reaching. Standing or walking for up to 12 hours during shifts and continuously climbing and descending stairs may also be necessary. Job Type & Location This is a Contract position based out of Carteret, NJ. Pay and Benefits The pay range for this position is $30.00 - $35.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Carteret,NJ. Application Deadline This position is anticipated to close on Jun 26, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Job Title: Sterile Processing Technician Location: Neptune, NJ Job Type: Local or Travel Contract (13 Weeks) Shift & Schedule: • Night Shift | 11:00 PM – 7:30 AM & Mid Shift | 3:00 PM – 11:30 PM, • 5 x 8s | 40 Hours Per WeekCompensation Local Candidates: $23 – $33/hour Travel Candidates: $30 – $38/hour (based on experience) Job Summary We are seeking an experienced Sterile Processing Technician to support surgical and clinical operations by ensuring the proper decontamination, sterilization, and distribution of medical instruments and equipment. The ideal candidate will have strong knowledge of sterilization processes, infection control standards, and experience working in fast-paced healthcare environments. Key Responsibilities • Receive, sort, clean, decontaminate, assemble, sterilize, and distribute surgical instruments and reusable medical equipment., • Operate sterilization equipment including Steam Sterilizers, ETO Sterilizers, Sterrad Systems, and Steris Systems., • Perform biological testing and Bowie-Dick testing, including incubation, interpretation, and documentation., • Maintain accurate sterilization records, load documentation, integrator interpretation, and printout verification., • Utilize computerized instrument tracking systems and maintain accurate count sheets., • Assemble operating room case carts based on physician preference cards., • Communicate with Operating Room teams regarding missing instruments or supply needs., • Adhere strictly to infection control protocols and Universal Precautions., • Ensure proper use of detergents, disinfectants, and personal protective equipment (PPE)., • Complete daily departmental checklists and compliance documentation., • Safely lift, push, and pull equipment and supply carts as required.Required Qualifications, • High School Diploma or GED., • Minimum 5+ years of Sterile Processing experience., • Completion of a Central Processing course or at least 1 year of instrument processing experience., • Strong knowledge of sterilization techniques and infection control standards., • Ability to work rotating shifts, including:, • Every other weekend, • 3 out of 6 holidays (as required), • Physical ability to:, • Lift up to 50 lbs, • Push/pull up to 60 lbs, • Stand for extended periods (entire shift), • Active certification:, • CRCST or, • CBSPD / CBSPDTPreferred Qualifications, • Experience assembling Operating Room case carts., • Background in high-volume sterile processing departments., • Familiarity with computerized instrument tracking systems., • Strong communication and teamwork skills.Required Certifications, • CRCST Certification OR • CBSPD / CBSPDT Certification For more details reach at vgill@navitassols.com or Call / Text at 516-862-1203. About Navitas Healthcare, LLC: It is a Joint Commission Certified / WBENC and one of the fastest-growing healthcare staffing firms in the US providing Medical, Clinical and Non-Clinical services to numerous hospitals. We offer the most competitive pay for every position we cater. We understand this is a partnership. You will not be blindsided, and your salary will be discussed upfront.

Job Description Hi, we're Nuts.com! Nuts.com is a self-funded, profitable, rapidly growing multi-channel DTC specialty food and wellness company with over 550 people on our team. We're changing the landscape of snacking on nuts, dried fruit, chocolate and more! We planted our roots in Newark, New Jersey during the Great Depression, selling premium nuts on Mulberry Street's open-air market. We've come quite a long way since then, taking our multi-generational family business online in 1999. Even after 97 years, we continue to pride ourselves in expertly sourcing the highest quality foods and treating our customers like family. What's our team like? We're driven, collaborative and entrepreneurial. Energy and passion power our business and we look for candidates who share in that excitement to help us continue to build something special. The role: The MRE Supervisor is a working supervisor responsible for supporting equipment reliability, maximizing asset uptime, and leading day-to-day maintenance and reliability execution at our food manufacturing, warehousing, and distribution site. This role is both hands-on and supervisory, directly performing maintenance work while guiding a team of maintenance technicians to ensure work is completed safely, efficiently, and in compliance with food safety and operational standards. The MRE Supervisor will help execute preventive and predictive maintenance programs, troubleshoot equipment issues, support root cause problem-solving, and ensure maintenance activities are aligned with safety, food safety, quality, and operational excellence objectives. How you'll make an impact: Maintenance Execution & Team Supervision • Lead, assign, and participate in daily maintenance activities, including reactive repairs, preventive maintenance, troubleshooting, and equipment inspections, • Serve as a working supervisor by performing hands-on mechanical, electrical, and facilities maintenance as needed, • Supervise, train, coach, and develop a team of maintenance technicians, fostering a culture of safety, food safety, accountability, and continuous improvement, • Support daily work planning and scheduling to ensure timely completion of work orders, PMs, and urgent maintenance needs, • Help manage parts usage, spare parts organization, and maintenance supplies to support equipment uptime, • Coordinate with vendors and contractors as needed for repairs, inspections, or specialized maintenance work, • Ensure maintenance activities comply with OSHA, GMP, SQF, and company safety and food safety standards, • Maintain accurate CMMS records, work orders, equipment history, and maintenance documentationAsset Reliability & Maintenance Strategy, • Execute and support preventive and predictive maintenance programs to improve equipment reliability and reduce downtime, • Review equipment performance, downtime trends, and recurring failures to help identify improvement opportunities, • Participate in root cause analysis for equipment failures and help implement corrective actions, • Support tracking of maintenance KPIs such as PM completion, downtime, work order backlog, and equipment reliability, • Recommend and assist with improvements related to equipment reliability, process efficiency, safety, and energy usage, • Partner with the Maintenance & Reliability Manager or site leadership to prioritize maintenance work and reliability initiativesContinuous Improvement, • Partner with production, sanitation, FSQA, EHS, and operations teams to support daily execution and long-term operational goals, • Participate in small equipment upgrade projects, reliability improvements, and automation-related initiatives, • Support accurate equipment records, spare parts lists, PM procedures, and standard work documentation, • Contribute to cross-functional improvement projects, including Value Creation Process (VCP) initiatives focused on reducing downtime, waste, and cost, • Identify opportunities to improve maintenance processes, technician efficiency, and equipment performanceSafety & Compliance, • Promote and enforce safe work practices, including lockout/tagout, hot work, confined space, PPE, and other applicable safety requirements, • Ensure all maintenance work is performed in compliance with OSHA, GMP, SQF, and company safety and food safety standards, • Participate in safety audits, inspections, and corrective action follow-up related to maintenance and equipment, • Support the EHS team in identifying equipment-related hazards and implementing engineering controls to reduce risk, • Model safe, clean, and food-safe work habits while holding the team accountable to the same standardsWhat you'll bring, • High school diploma or GED required; technical certification, trade school, or associate degree in a related field preferred, • 3+ years of maintenance experience in food manufacturing, distribution, warehousing, or a related industrial environment, • Prior supervisory, lead technician, or team lead experience preferred, • Strong hands-on mechanical and electrical troubleshooting skills, • Experience using CMMS systems for work orders, preventive maintenance, and equipment documentation, • Familiarity with preventive maintenance practices; exposure to predictive maintenance technologies such as vibration analysis, thermography, or oil analysis is a plus, • Understanding of OSHA, GMP, SQF, and food safety requirements in a manufacturing or distribution environment, • Ability to troubleshoot equipment issues, support root cause analysis, and drive corrective actions, • Strong communication, organization, and prioritization skills, • Ability to coach technicians while also working alongside the team to complete maintenance tasks, • Commitment to safety, food safety, reliability, and continuous improvement, • Basic understanding of maintenance costs, parts usage, and budget awareness, • Bilingual in English/Spanish is a plusWhat we offer, • A high-growth and rewarding role in a foundationally strong and rapidly evolving business, • Annual Salary Range: $75,000-$85,000 plus annual bonus, • Excellent benefits including a 401K Match, • Paid Maternity, Adoption and Paternity leave, • And all the Nuts.com snacks your heart desires + a 40% employee discount EEO STATEMENT Nuts.com is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard of actual or perceived race, color, creed, religion, national origin, ancestry, citizenship status, immigration status, age, sex or gender (including pregnancy), gender identity or expression (including transgender status), sexual orientation, marital status, veteran status, physical or mental disability, genetic information, or any other characteristic protected by applicable federal, state, or local laws. Applicants with disabilities who require assistance or accommodation during the application or interview process should reach out to us at people@nuts.com.

Job Description Title: Behavior Technician (Naturalistic, Play-Based ABA) Cortica is looking for dedicated, compassionate Behavior Technicians to join our growing team and help us design and deliver life-changing care for children with neurodevelopmental differences. At Cortica, we don't just offer jobs; we offer careers with purpose, growth, and support. What We Offer: • Pay Range: $23.64 to $31.72 per hour, based on experience and education., • Thoughtfully Designed Schedules: We offer a predictable schedule with a single, direct rate of pay, including:, • Part-time roles with flexible 5-, 3- or 2-day-per-week options., • Opportunities to pick up additional hours on Saturdays, • Fully Paid Training & Certification: Kickstart your career with Cortica with a comprehensive 3-week, in-person orientation that includes hands-on training, a Board-Certified Autism Technician (BCAT) exam review, and full coverage of your exam fees. We're invested in your success from day one., • Referral Bonus: Earn between $250-$500 for successful referrals., • Cell Phone Stipend: Stay connected with support from us., • Paid Drive Time and Mileage Reimbursement: We value your time on the road and include toll reimbursement in select areas., • 401(k) with Company Matching: Secure your future with our generous plan., • Ongoing Professional Development: Access continuous training through in-person and online opportunities., • Supportive Environment: Collaborate with and receive expert coaching from Lead BTs, ABA Assistant Supervisors, and ABA Supervisors who champion your growth., • Career Advancement: Opportunities to grow your career by advancing to a BCBA role, ascending the Behavior Technician Clinical Ladder, or serving in a corporate support role., • Learn from Experts in Other Fields: Partner with BCBAs and experts in speech-language therapy, music therapy, occupational therapy, and physical therapy as well as counselors, pediatricians, neurologists, and nurse practitioners. Your Impact & Responsibilities: • Provide 1:1 and group behavior-analytic services to children with autism and other neurodevelopmental differences., • Implement positive behavior strategies developed with your BCBA., • Use evidence-based practices to create meaningful progress for families., • Document session data to track and support treatment goals., • Collaborate closely with families and supervisors to build supportive environments., • Follow Cortica's crisis protocols, including de-escalation and mandated reporting. Who We're Looking For: • Experience working with children (experience with autism is a plus!)., • High School or equivalent, bachelor's or master's degree., • Willingness to obtain your BCAT credential within 90 days of your start date (We provide all training!)., • Ability to consistently travel between client sites within a 30–40-minute radius using reliable transportation., • Tech-savvy with EMR systems and Microsoft Office tools. Our Inclusive Culture: • Transdisciplinary Approach: Collaborate with experts in various fields to care for the whole child., • Collaborative Process: Develop individualized care plans alongside families and clinicians., • Strength-Based, Neurodiversity-Affirming Model: Focus on building on each child's unique strengths rather than emphasizing deficits. Join Cortica's team and make a meaningful impact by applying a strength-based, neurodiversity-affirming ABA therapy model. Help children recognize and build on their unique abilities, fostering positive relationships and skills that translate across home, school, and community settings. Be part of a progressive approach that combines neuroscience and developmental models to empower each child to thrive. Ready to make a difference? Apply today! Equal Opportunity Employer (EOE). For more details, visit the full job description here. Behavioral Health Center of Excellence (BHCOE) Accredited 2024 | America's Greatest Midsize Workplaces 2025 Newsweek | Great Place to Work Certified 2025 | Glassdoor 4.3 Rating 2025 | Indeed 4.1 Rating 2025 Privacy Notice Cortica is committed to protecting your personal information in compliance with applicable federal and state laws. Please review our Privacy Notice to understand how your data is collected, used, and protected. Driving Requirement This position requires the successful completion of a post-offer background check and a motor vehicle report review. E-Verify Participation This employer participates in E-Verify. Click here to view the E-Verify Poster and your Right to Work. Este empleador participa en E-Verify. Este empleador participa en E-Verify. Haga clic aquí para ver el cartel de E-Verify y su derecho a trabajar. #LI-JK1

Job Description For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in DALLAS TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned BMW Master Technician Mechanic ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a BMW Master Technician Mechanic to join our elite team. If you specialize in BMW and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest BMW and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with BMW vehicles Strong specialization and experience with BMW vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on BMW vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc241225

Job Description About the Role: The X-Ray Technician in Bayonne plays a critical role in the diagnostic process by producing high-quality radiographic images that assist physicians in diagnosing and treating medical conditions. This position requires meticulous attention to detail to ensure patient safety and image accuracy while adhering to established protocols and radiation safety standards. The technician will interact directly with patients, explaining procedures and ensuring their comfort throughout the imaging process. Collaboration with radiologists and other healthcare professionals is essential to facilitate timely and accurate diagnosis. Ultimately, the role contributes significantly to patient care by providing essential imaging services that support effective medical decision-making. Minimum Qualifications: • Completion of an accredited radiologic technology program., • Certification as a Radiologic Technologist (ARRT or equivalent)., • Valid state licensure to practice as an X-Ray Technician in the United States., • Strong understanding of radiographic techniques and radiation safety principles., • Ability to communicate effectively with patients and healthcare professionals. Preferred Qualifications: • Experience working in a hospital or clinical setting., • Additional certifications in specialized imaging techniques (e.g., CT, MRI)., • Familiarity with electronic medical records (EMR) systems., • Bilingual abilities to assist a diverse patient population., • Continuing education in radiologic advancements and patient care. Responsibilities: • Prepare and position patients correctly to capture the required radiographic images., • Operate X-ray equipment safely and efficiently, ensuring compliance with radiation safety guidelines., • Maintain accurate patient records and document imaging procedures performed., • Collaborate with radiologists and healthcare team members to review images and ensure quality standards are met., • Perform routine maintenance and quality control checks on imaging equipment., • Educate patients about the imaging process and address any concerns to ensure their comfort and cooperation., • Adhere to all healthcare regulations, safety protocols, and confidentiality requirements. Skills: The required skills enable the X-Ray Technician to accurately position patients and operate imaging equipment to produce clear diagnostic images while minimizing radiation exposure. Effective communication skills are essential for explaining procedures to patients and collaborating with medical staff to ensure optimal imaging outcomes. Attention to detail and organizational skills are used daily to maintain precise records and adhere to safety protocols. Preferred skills, such as experience with advanced imaging modalities and EMR systems, enhance the technician's ability to support a broader range of diagnostic services and streamline workflow. Continuous learning and adaptability allow the technician to stay current with evolving technologies and best practices in radiologic care.

Job Description Senior Construction Inspector - Transportation & Infrastructure Location: Woodbridge, NJ Employment Type: Full-Time | On-Site Salary Range: $100,000 – $150,000 annually (based on experience) Industry: Construction Management | Transportation | Infrastructure | Bridge | Civil Engineering About Garg Consulting Services, Inc. Garg Consulting Services, Inc. (Garg) is a leading multidisciplinary engineering and construction management firm specializing in transportation infrastructure, rail, bridge, and civil construction projects throughout the Northeast. Position Overview Garg Consulting Services, Inc. is seeking an experienced Senior Construction Inspector to support transportation infrastructure construction projects throughout Northern and Central New Jersey. This role supports NJ DOT, NJTA, NJ Transit, and public-sector roadway, bridge, rail, and civil projects, ensuring compliance with approved plans, specifications, and safety standards. The Senior Construction Inspector performs advanced field inspections, coordinates daily with contractors, engineers, and client agencies, and oversees construction quality, documentation, and pay quantities. This full-time, on-site position may also provide technical leadership and mentoring to junior inspection staff. Key Responsibilities • Perform and oversee daily field inspections of roadway, bridge, rail, and transportation infrastructure projects., • Ensure construction activities comply with approved plans, specifications, and contract documents., • Serve as the senior field representative and liaison between contractors, engineers, and client agencies., • Document daily construction activities, quantities, labor, equipment, and progress using digital reporting tools., • Track and verify pay quantities and assist with review of progress payments and estimates., • Review material certifications, test results, and submittals prior to installation., • Inspect traffic control and erosion control measures for compliance with approved plans and regulations., • Identify non-conforming work and coordinate corrective actions., • Assist with change orders, field modifications, and as-built documentation., • Lead and mentor junior inspection staff as required., • Attend construction meetings and provide technical field input., • Support project closeout activities including final inspections and punch lists.Required Qualifications & Certifications, • Bachelor's degree in civil engineering, Construction Management, or related field OR equivalent experience., • Minimum five (5) years of experience as a Senior Construction Inspector or Resident Engineer., • New Jersey P.E. license or NICET Level IV Highway Construction Inspection certification., • ACI certification., • NJ SAT Asphalt Technician certification., • Rutgers Traffic Control Coordinator certification., • OSHA 30-Hour Construction Safety certification., • Ability to perform quantity calculations and interpret plans and specifications., • Proficiency with digital inspection tools and Microsoft Office., • Ability to work in varied weather and field conditions., • TWIC Card eligibility and background screening compliance.Preferred Qualifications & Experience, • Experience on NJ DOT, NJTA, NJ Transit, or public-sector transportation projects., • Rail, bridge, and complex transportation infrastructure experience., • Experience mentoring or overseeing junior inspectors., • Familiarity with Document Control and Project Management Programs such as SiteManager, FieldManager, Bluebeam or Procore., • Additional certifications such as CMIT, EIT, CCMCompensation & Benefits, • Competitive Salary: $100,000 – $150,000 annually, • Medical, Dental & Vision Insurance, • 401(k) Retirement Plan with Company Match, • Paid Time Off & Paid Holidays, • Performance-Based Bonuses, • Professional Development & Licensing Support, • Wellness perk; gym membership reimbursementEqual Opportunity Employer Garg Consulting Services, Inc. is an Equal Opportunity Employer. Employment decisions are based on merit, qualifications, and business needs and comply with all applicable laws. Final candidates are required to undergo a background check and a pre-employment drug screening. These screenings may include employment and education verification, reference checks, and a criminal history check as allowed by law. All screenings are conducted in accordance with federal, state, and local requirements, including the Fair Credit Reporting Act (FCRA). Employment offers are contingent upon the successful completion of all required checks.

Job Description For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in DALLAS TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned BMW Master Technician Mechanic ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a BMW Master Technician Mechanic to join our elite team. If you specialize in BMW and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest BMW and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with BMW vehicles Strong specialization and experience with BMW vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on BMW vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc241236

Job DescriptionJob Overview:As a member of the health care team, is responsible for the nutritional care of assigned pediatric populations with assistance when needed from clinical orienteer and supervision. Responsibilities include nutrition assessment, implementation of nutritional care plans and nutrition education. Assists with operational functions of the Clinical Nutrition Department. This position is located in the outpatient facility in Woodbridge, NJ. Qualifications: Required: • Bachelor's Degree in Nutrition or Dietetics from an accredited college or university., • Registered dietitian, RD or Registered Dietitian Eligible, RDE with the Academy of Nutrition and Dietetics., • If RDE, must become RD within six months of hire date., • Valid NJ driver's license in good standing., • AHA BLS Provider Certification., • Evidence of excellent verbal and written English communication skills., • Ability to collaborate with others. Preferred: • Unlicensed Assistive Personnel (UAP) curriculum completion., • Medical Assistant certification. Certifications and Licenses Required: • Registered dietitian, RD or Registered Dietician Eligible, RDE with the Academy of Nutrition and Dietetics., • If RDE, must become RD within six months of hire date., • Valid NJ driver's license in good standing., • AHA BLS Provider Certification. Scheduling Requirements: • Per Diem. Essential Functions: • Utilizes basic understanding of diagnoses pertinent medical history rational and goal of treatment to provide nutritional care for assigned patients., • Nutritional care includes evaluation of nutritional status, creation, implementation, monitoring and revision of nutritional care plans and provision of nutrition education., • Completes nutritional assessments in a thorough and timely manner as per policy and procedure., • Communicates effectively with patients, families, and interdisciplinary staff in oral and written formats in both formal and informal situations., • Participates in nutritional in services and community education programs., • Evaluates and may create educational materials for nutrition education and professional resources., • Coordinates nutritional care with Purchasing, Food Service, Medical and other clinical and administrative departments., • Participates in development, revision evaluation and implementation of departmental policies and procedures., • Participate in routine duties necessary for department functioning., • Participate in focus audits, performance improvement activities, policy and procedure review and assigned projects which enhance department performance and support the hospital mission., • May guide Dietetic Technician., • May mentor dietetic interns and other students., • Meets minimum annual expected volumes. Other Duties:Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Job Description Hi, we're Nuts.com! Nuts.com is a self-funded, profitable, rapidly growing multi-channel DTC specialty food and wellness company with over 550 people on our team. We're changing the landscape of snacking on nuts, dried fruit, chocolate and more! We planted our roots in Newark, New Jersey during the Great Depression, selling premium nuts on Mulberry Street's open-air market. We've come quite a long way since then, taking our multi-generational family business online in 1999. Even after 96 years, we continue to pride ourselves in expertly sourcing the highest quality foods and treating our customers like family. What's our team like? We're driven, collaborative and entrepreneurial. Energy and passion power our business and we look for candidates who share in that excitement to help us continue to build something special. The role: The Quality Assurance Technician is responsible for the frontline monitoring of Food Safety and Quality policies, programs, and procedures. This role supports the facility in meeting quality assurance, food safety, and regulatory requirements by partnering with Operations to ensure the consistent production of wholesome, high-quality products. This position reports to the Quality Assurance Manager and serves as a key technical resource on the production floor, assisting in maintaining an "audit-ready" facility while ensuring constant compliance with SQF and FDA regulations. How you'll make an impact Report and document any food safety or quality issues to the QA Manager and/or SQF Practitioner immediately. Conduct pre-operational inspections and review checklists to release production areas for daily use. Perform swabbing (ATP, allergen, biological, etc.), product sampling, and other quality testing. Conduct daily audits on Good Manufacturing Practices (GMPs) to ensure compliance with 21 CFR 117 and Safe Quality Food (SQF) standards. Inspect raw materials, work-in-progress (WIP), rework, and finished products; perform regular verifications including high-risk product checks and packaging audits. Monitor the product hold-and-release process, providing documented reports and tracking data for non-conforming goods. Assist in investigating deviations from procedures and customer complaints, and support root cause analysis to help prevent recurrence. Support regular calibration and maintenance of essential facility equipment, such as scales and metal detectors. Partner with the Sanitation team to verify effective cleaning and support operations staff with real-time food safety and product quality questions. Actively support record-keeping programs (SafeFoods/EQMS/TraceGains) to ensure data integrity and accurate documentation. Follow and enforce safety rules to prevent injuries; monitor the production floor for associate, visitor, and contractor GMP and Food Defense compliance. Perform other tasks as assigned by FSQA management to support department and facility goals. What you'll bring: • Bilingual in English and Spanish is strongly preferred, • 2+ years of hands-on experience in a food manufacturing or packaging environment is desirable., • Ability to read, write, and speak English fluently to complete required safety documentation and reports., • Strong computer proficiency, including experience with Google Doc, Sheets, email, and Electronic Quality Management Systems (EQCMS)., • Ability to work comfortably with handheld devices, scanners, and computers for real-time data entry., • Ability to handle fast-paced situations and use good judgment to make quick, common-sense decisions about product safety., • Great organizational skills and a focus on getting details right every time., • Ability to work well with a team while being independent enough to speak up and enforce safety rules., • Ability to stand for long periods and work comfortably on a busy production floor., • Schedule Flexibility: Must be flexible to work different shifts. The working schedule is subject to change based on business needs. Flexibility to work a full-time schedule between the hours of 6:00 am-5:30 pm Ability to work any shift and overtime as needed to support 24/7 or seasonal production demands. What we offer: • A high-growth and rewarding role in a foundationally strong and rapidly evolving business, • Hourly Pay Range: $19.00 - $20.50/hour based on experience, • And all the Nuts.com snacks your heart desires + a 40% employee discount EEO STATEMENT Nuts.com is an affirmative action and equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, gender expression, national origin, age, protected veteran or disabled status, or genetic information.