Trabajos technical lead en Edison, New JerseyCrear alertas

Job Description Job Description Date 10/2025 Location 22 Van Dyke Avenue, New Brunswick NJ 08901 / 1300 Airport Road, North Brunswick NJ 08902 Title Operator, Dispensing Department Dispensing Reports to Manager, Dispensing FLSA (Exempt or Non-Exempt) Non-Exempt Role Overview The Dispensing Operator will perform all functions related to dispensing of material, receipt of goods, put-away material into warehouse aisles, pull out material per Batch card/Pick ticket, put back to same location from where it was pulled for batches, manual order processing, order auditing, shipment preparation, pallet building, transferring material from wood to plastic pallets, and cycle counting inventory. All functions may require the use of powered industrial trucks, Syspro or RF as needed. Will need to work in temperature-controlled areas. Areas of Responsibility Level 1: Dispensing Operator Overview: This is a training-level role for individuals with limited or no prior experience in pharmaceutical dispensing. Works under close supervision while learning company SOPs, GMP standards, and equipment operations. Key Responsibilities: • Assist in pulling and weighing raw materials under supervision., • Learn to read and interpret batch cards and pick slips., • Calibrate scales before use., • Cleans room after batch is complete, • Ensures safety and quality standards are consistently followed., • Maintain basic cleanliness of work area and equipment., • Support warehouse duties such as material receipt and basic inventory handling., • Follow safety procedures and learn PPE protocols., • Operate pallet jacks or assist with forklift activities (if certified). Level 2: Dispensing Operator Overview: This level is for operators with hands-on experience in pharmaceutical or supplement dispensing. Operators are responsible for completing batch-related activities with minimal supervision and maintaining documentation compliance. Key Responsibilities: • Dispense raw materials independently per batch cards., • Reviews batch card. Determine material to be used in the batch. Pull out material per requirement and enter in logbooks., • Performs requests received from other departments such as R&D, Production, QA or Purchasing etc., • Cleans room after batch is complete, • Ensures safety and quality standards are consistently followed., • Weigh materials accurately and calibrate scales before use., • Use Syspro or RF systems for inventory control., • Handle, put-away, return, and transfer of goods between warehouse locations., • Perform manual order processing, auditing, and preparation for shipments., • Maintain gowning and hygiene protocols in controlled environments., • Ensure accurate documentation in logs and batch records. Level 3: Dispensing Operator Overview: A highly experienced operator who may act as a team lead or trainer. Oversees batch dispensing activities, ensures compliance, and supports continuous improvement initiatives. Key Responsibilities: • Lead batch dispensing operations; verify materials and documentation., • Train and mentor entry and intermediate-level operators., • Collaborate with cross-functional teams (QA, R&D, Production)., • Reviews batch card. Determine material to be used in the batch. Pull out material per requirement and enter in logbooks., • Performs requests received from other departments such as R&D, Production, QA or Purchasing etc., • Cleans room after batch is complete, • Ensures safety and quality standards are consistently followed., • Conduct cycle counts and helps manage inventory accuracy., • Troubleshoot equipment or material issues; escalate when necessary., • Lead compliance audits for dispensing areas., • Support continuous improvement, safety, and 5S initiatives. Physical & Environmental Requirements (All Levels): • Able to lift 55 lbs regularly; occasionally up to 75 lbs., • Stand/walk for 6+ hours per shift., • Work in temperature-controlled rooms with PPE (lab coat, gloves, face mask, respirator, etc.)., • Exposure to dust, noise, and cleaning agents. Bottom of Form Requirements Education & Qualification: Level 1: Dispensing Operator • High school diploma or GED., • 0–1 year of experience in manufacturing or warehouse setting., • Basic math and English reading skills., • Willingness to learn cGMP, OSHA, and SOPs. Level 2: Dispensing Operator • High school diploma or GED., • 2+ years of experience in a pharmaceutical production environment., • Forklift operation experience (certification preferred)., • Familiarity with cGMP and SOP documentation standards., • Attention to detail and ability to troubleshoot basic dispensing issues. Level 3: Dispensing Operator Requirements: • High school diploma or GED; technical certification a plus., • 4+ years of dispensing experience in a GMP-regulated and within a pharmaceutical production environment, • Strong understanding of regulatory compliance (FDA, GMP, OSHA)., • Proven ability to lead teams and communicate effectively., • Proficient in inventory software (Syspro or similar ERP systems)., • Additional experience in granulation, compression, or blending is a strong plus. Certifications, Licenses, Credentials: • Prior certification to operate a sit-down forklift is a plus. Skills & Ability • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards, etc., • Mechanically inclined to understand the inner workings of the equipment., • Demonstrates the ability to read and write basic English to be able to understand the industry-regulated instruction sheets., • Must have attention to detail. Physical Requirements (lifting, etc.): • Ability to lift up to 55 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Must be able to wear all PPE including a lab coat, face mask, booties, gloves, safety glasses/goggles, and respirators. Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment 1st shift - 7:00 am to 3:30 pm

Job Description Position Overview: This is a hands-on individual contributor production role requiring expertise in multiple manufacturing disciplines, including CNC machining, manual tacking, lamination, engraving, and card finishing. The ideal candidate is a reliable team player who can adapt to different functions as needed to support production goal. Key Responsibilities: • Operate and maintain CNC machines, lamination systems, engraving systems, and/or card finishing equipment to produce high-quality components., • Perform tacking operations with precision and in accordance with production requirements., • Inspect and verify output quality at each stage, ensuring adherence to standards and specifications., • Maintain accurate documentation of production data, process parameters, and quality checks through our ERP input tools or manual documentation., • Flex between functions and workstations based on production demand or team capacity., • Rapidly adapt to changes in workflow, priorities, and scheduling to support production goals., • Collaborate with supervisors and planners to address bottlenecks or resource gaps in our Lead Daily Management solution., • Follow all safety protocols and procedures, maintaining a safe and organized workspace., • Conduct basic troubleshooting and preventative maintenance on equipment., • Report malfunctions or hazards promptly to minimize downtime and risk. Skills & Qualifications • High School Diploma, GED or relevant experience required., • 3+ years of experience in a hands-on manufacturing environment, • Demonstrated expertise in at least one of the following areas: CNC, tacking, lamination, engraving, card finishing., • Strong mechanical aptitude and ability to read technical drawings, blueprints, or CAD files., • Excellent communication, coordination, and interpersonal skills., • Proven ability to adapt to changing priorities and support team flexibility., • Preferred: Familiarity with lean manufacturing and continuous improvement principles., • Preferred: Understanding of ISO or other quality management systems., • Basic computer literacy for equipment interfaces, reporting, and tracking. Preferred: • Familiarity with lean manufacturing and continuous improvement principles., • Understanding of ISO or other quality management systems., • Basic computer literacy for equipment interfaces, reporting, and tracking. About CompoSecure CompoSecure, a GPGI business (NYSE: GPGI), is the leading manufacturer of Premium Metal Payment Cards and also offers best-in-class Authentication and Digital Asset solutions. The Company's offerings combine elegance, simplicity, and security to deliver exceptional experiences and peace of mind, enabling trust for millions of people around the globe. For more information, please visit www.CompoSecure.com and www.GetArculus.com. We offer a comprehensive benefits package designed to support your health, financial well-being, and work-life balance, including medical, prescription, dental, and vision coverage; FSA/HSA options; company-paid life and disability insurance; 401(k) with company match; paid time off (PTO) and holidays; annual bonus opportunities; an employee assistance program (EAP); and opportunities for career growth and advancement. Additional details will be provided during the hiring process. CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to recruiting@composecure.com.

Job DescriptionCompany Description Cornerstone Building Brands is a leading manufacturer of exterior building products for residential and low-rise non-residential buildings in North America. Headquartered in Cary, N.C., we serve residential and commercial customers across the new construction and Repair & Remodel (R&R) markets. Our market-leading portfolio of products spans vinyl windows, vinyl siding, stone veneer, metal roofing, metal wall systems and metal accessories. Cornerstone Building Brands’ broad, multi-channel distribution platform and expansive national footprint includes more than 18,800 team members at manufacturing, distribution and office locations throughout North America. Corporate stewardship and Environmental, Social and Governance (ESG) responsibility are embedded in our culture. We are committed to contributing positively to the communities where we live, work and play. For more information, visit us at cornerstonebuildingbrands.com. Job Description Extrusion Technician JOB DETAILS: • Pay rate $23 per hour, • 1st Shift: 7am-3:30pm Monday through Friday Key Responsibilities: • Maintain a safe, organized, and compliant work environment, actively enforcing safety policies, PPE requirements, and 5S standards; identify and escalate abnormal conditions or risks, • Execute and lead extrusion line changeovers in accordance with production schedules, priorities, standard work, and lockout/tagout (LOTO) procedures, • Perform die and calibrator cleaning, inspection, and preparation, ensuring readiness for startups and consistent product quality, • Support extrusion line startups, monitoring equipment performance and adjusting to achieve stable, efficient operation, • Assist operators with production troubleshooting, process support, and equipment-related issues, • Communicate effectively during shift handoffs and WIT (Winning Impact Team) meetings, providing clear updates on equipment status, changeovers, and production priorities, • Maintain housekeeping and ensure work areas are prepared for the incoming shift, • Identify opportunities for process improvement, waste reduction, and improved changeover efficiency, • Support training and mentoring of less-experienced technicians or operators as neededQualifications Education and Experience: • High School Diploma or GED required, • 2+ years of manufacturing experience required; extrusion experience strongly preferred, • Experience: working with production equipment, changeovers, and standard work environments, • Vinyl (PVC) and plastics extrusion experience is a plus Knowledge, Skill, and Abilities: • Strong mechanical aptitude with the ability to understand and support complex equipment, • Working knowledge of LOTO, safety procedures, and 5S in manufacturing environment, • Ability to follow and improve Standard Work and support continuous improvement initiatives, • Strong communication skills with the ability to collaborate across shifts and departments, • Ability to manage changing priorities in a fast-paced production environment, • Detail-oriented with a focus on quality, safety, and efficiency Physical Requirements: • Ability to stand, walk, bend, and work in a manufacturing environment for extended periods of time, • Ability to wear required Personal Protective Equipment (PPE), • Ability to lift up to 50 lbs. Additional Information Site Location: 1 Silverline Dr. North Brunswick Townsship, NJ 08902 Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. You can also join one of our Employee Resource Groups which help support our commitment to providing a diverse and inclusive work environment. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. All your information will be kept confidential according to EEO guidelines. Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here. You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here. If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at 281-897-7788 or HRCompliance@cornerstone-bb.com. If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at 281-897-7788 or HRCompliance@cornerstone-bb.com. This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. All your information will be kept confidential according to EEO guidelines. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Note to External Recruiters Cornerstone Building Brands does not accept unsolicited resumes and will not pay fees for any candidate submissions that were not expressly authorized. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

Job Description Position Overview: This is a hands-on individual contributor production role requiring expertise in multiple manufacturing disciplines, including CNC machining, manual tacking, lamination, engraving, and card finishing. The ideal candidate is a reliable team player who can adapt to different functions as needed to support production goal. Key Responsibilities: • Operate and maintain CNC machines, lamination systems, engraving systems, and/or card finishing equipment to produce high-quality components., • Perform tacking operations with precision and in accordance with production requirements., • Inspect and verify output quality at each stage, ensuring adherence to standards and specifications., • Maintain accurate documentation of production data, process parameters, and quality checks through our ERP input tools or manual documentation., • Flex between functions and workstations based on production demand or team capacity., • Rapidly adapt to changes in workflow, priorities, and scheduling to support production goals., • Collaborate with supervisors and planners to address bottlenecks or resource gaps in our Lead Daily Management solution., • Follow all safety protocols and procedures, maintaining a safe and organized workspace., • Conduct basic troubleshooting and preventative maintenance on equipment., • Report malfunctions or hazards promptly to minimize downtime and risk., • Independently can select program files and adjust offsets according to material thickness Skills & Qualifications • High School Diploma, GED or relevant experience required., • 3+ years of experience in a hands-on manufacturing environment, • Demonstrated expertise in at least one of the following areas: CNC, tacking, lamination, engraving, card finishing., • Strong mechanical aptitude and ability to read technical drawings, blueprints, or CAD files., • Excellent communication, coordination, and interpersonal skills., • Proven ability to adapt to changing priorities and support team flexibility., • Preferred: Familiarity with lean manufacturing and continuous improvement principles., • Preferred: Understanding of ISO or other quality management systems., • Basic computer literacy for equipment interfaces, reporting, and tracking., • Basic knowledge of using measurement tools such as depth gauges, micrometers, and caliper Preferred: • Familiarity with lean manufacturing and continuous improvement principles., • Understanding of ISO or other quality management systems., • Basic computer literacy for equipment interfaces, reporting, and tracking. About CompoSecure CompoSecure, a GPGI business (NYSE: GPGI), is the leading manufacturer of Premium Metal Payment Cards and also offers best-in-class Authentication and Digital Asset solutions. The Company's offerings combine elegance, simplicity, and security to deliver exceptional experiences and peace of mind, enabling trust for millions of people around the globe. For more information, please visit www.CompoSecure.com and www.GetArculus.com. We offer a comprehensive benefits package designed to support your health, financial well-being, and work-life balance, including medical, prescription, dental, and vision coverage; FSA/HSA options; company-paid life and disability insurance; 401(k) with company match; paid time off (PTO) and holidays; annual bonus opportunities; an employee assistance program (EAP); and opportunities for career growth and advancement. Additional details will be provided during the hiring process. CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to recruiting@composecure.com.

Job DescriptionCompany Description Cornerstone Building Brands is a leading manufacturer of exterior building products for residential and low-rise non-residential buildings in North America. Headquartered in Cary, N.C., we serve residential and commercial customers across the new construction and Repair & Remodel (R&R) markets. Our market-leading portfolio of products spans vinyl windows, vinyl siding, stone veneer, metal roofing, metal wall systems and metal accessories. Cornerstone Building Brands’ broad, multi-channel distribution platform and expansive national footprint includes more than 18,800 team members at manufacturing, distribution and office locations throughout North America. Corporate stewardship and Environmental, Social and Governance (ESG) responsibility are embedded in our culture. We are committed to contributing positively to the communities where we live, work and play. For more information, visit us at cornerstonebuildingbrands.com. Job Description JOB DETAILS Base Pay $20.00 2nd Shift: 3pm-11:30pm Monday-Friday DUTIES AND RESPONSIBILITIES Under limited supervision, the Extruder Operator will be expected to operate extrusion machines in a work cell to produce required parts in accordance with customer requirements and the production schedule. Clearly understands and has demonstrated strong capability in setting up, starting, running, and tearing down any profile tooling in a safe and productive manner. Troubleshoot extrusion issues within a work cell. • Operates extrusion machines in a work cell to produce required parts as determined by customer requirements and the production schedule, • Analyze production data and make necessary adjustments to machine operations within the work cell., • Complete necessary documentation; process checks, quality checks, production reporting, etc., • Evaluate part conformance against documented engineering requirements., • Set up and start up any profile for any machine model in a work cell, • Troubleshot advanced problems against a defined process and escalates problems to appropriate support roles: ie, Technicians and Engineering, • Train new Extruder Operators, • Identify and communicate appropriately when electrical/mechanical/technical support is needed, • Participate and sustain 5S activities, • Work safely and follow safety and process policies., • Make sure co-workers are working safely and following safety policies, • Participate in & lead kaizen events and sustain improvements made from those events, • Lead work cell when needed, • Perform basic maintenance tasks as necessary, • Attend and participate in appropriate training and development programs., • Perform other duties across the plant as needed, directed by supervision or managementQualifications, • High School Diploma or equivalent preferred, • Basic computer skills – Windows & keyboarding, • Equipment operation experience, • Be able to lift at least 50 pounds, • Developing leadership skills, • Master all skills and knowledge while working as an Extruder Operator, • Developing strong process and equipment troubleshooting capabilities, • Ability to articulate problems and solutions verbally, • Ability to read and comprehend written instructions and process procedures, • Ability and skills to collaborate effectively in a team environment Additional Information Site Location: 1 Silverline Dr. North Brunswick Township, NJ 08902 Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. You can also join one of our Employee Resource Groups which help support our commitment to providing a diverse and inclusive work environment. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. All your information will be kept confidential according to EEO guidelines. Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here. You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here. If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at 281-897-7788 or HRCompliance@cornerstone-bb.com. If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at 281-897-7788 or HRCompliance@cornerstone-bb.com. This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. All your information will be kept confidential according to EEO guidelines. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Note to External Recruiters Cornerstone Building Brands does not accept unsolicited resumes and will not pay fees for any candidate submissions that were not expressly authorized. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

\n \n \n About us \n \n \n \n \n \n \n \n \n \n Johnson Controls, a global leader in thermal management, mission-critical building systems, energy efficiency, and decarbonization, helps customers use energy more productively, reduce carbon emissions, and operate with the precision and resilience required in rapidly expanding industries such as data centers, healthcare, pharmaceuticals, advanced manufacturing, and higher education. \n \n For more than 140 years, Johnson Controls has delivered performance where it really matters. Backed by advanced technology, lifecycle services and an industry-leading field organization, we elevate customer performance, turn goals into real-world results and help move society forward. \n \n \n \n \n \n \n \n \n \n What You Will Do \n The Program Support Specialist provides comprehensive oversight and accountability for the management of projects executed by Johnson Controls. This role focuses on effective communication, both internally and externally, to ensure all stakeholders are informed and that projects are completed on schedule and within budget. Acting as the primary point of contact for clients, the Specialist will resolve project and operational challenges, conduct periodic reviews to recommend improvements, and oversee their implementation. This role is instrumental in project sequencing, timeline adjustments, and scope document modifications to achieve objectives. \n \n How you will do it \n \n • \n Manage projects in alignment with client objectives, establishing and adhering to standards, policies, and procedures. \n • \n Facilitate effective communication between clients and internal stakeholders to address perceptions, needs, and challenges, identifying potential business opportunities. \n • \n Maintain a focus on fostering high levels of customer satisfaction, advocating for the client while providing guidance for necessary program improvements. \n • \n Monitor and oversee project progress, compile and communicate information about critical activities, resources, and timelines. \n • \n Create and update tracking reports weekly for all projects, ensuring comprehensive pre- and post-sale documentation. \n • \n Collaborate closely with the Strategic Account Manager and key stakeholders during performance reviews. Act as a liaison among Sales, Centers of Excellence, Field Delivery Teams, and Business Partners to refine key program elements. \n • \n Actively identify, assess, and mitigate project risks, providing support to field delivery teams as needed. \n • \n Implement a project-controlled environment through adherence to Playbook requirements, reporting weekly on project status to key stakeholders. \n \n This onsite role requires close partnership with client stakeholders, enabling proactive engagement and collaboration. By embracing collaboration and diverse perspectives, the Specialist will achieve trusted advisor status with the client and ensure seamless project execution through a commitment to integrity, candor, and continuous improvement. \n \n What we look for \n Required \n \n • \n Required B.S. in Computer Science, Engineering, or equivalent industry experience in functional project management within a complex physical security environment. \n • \n A minimum of 8 years of physical security experience, including regular interaction with general contractors, property managers, and client stakeholders. \n • \n A thorough understanding of both installation and service components of operational performance. \n • \n Detailed knowledge of access control technologies is essential. \n • \n Excellent leadership skills with at least 3 years of experience managing professionals in a construction setting, with a deep understanding of permitting and union complexities. \n • \n A self-starter capable of reviewing processes and instilling continuous improvement methodologies, including the establishment and execution of a formal quality assurance program. \n • \n Strong verbal and written communication skills, including presentation capabilities. Ability to lead and engage in meetings, representing both JCI and the client as required. \n • \n Required technical expertise includes certification or exposure to enterprise-wide access control and video systems. \n \n \n \n\n\n HIRING SALARY RANGE: $97,000- 146,000(Salary to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This position includes a competitive benefits package. The posted salary range reflects the target compensation for this role. However, we recognize that exceptional candidates may bring unique skills and experiences that exceed the typical profile. If you believe your background warrants consideration beyond the stated range, we encourage you to apply. To support an efficient and fair hiring process, we may use technology assisted tools, including artificial intelligence (AI), to help identify and evaluate candidates. All hiring decisions are ultimately made by human reviewers. For details, please visit the About Us tab on the Johnson Controls Careers site at https://jobs.johnsoncontrols.com/about-us \n \n

Job DescriptionOverview We are seeking a dedicated and skilled Residential HVAC Lead Installer to join our team in New Brunswick, NJ. In this role, you will be responsible for overseeing the installation of heating, ventilation, and air conditioning systems in residential settings. If you have a passion for delivering high-quality service and enjoy working in a collaborative environment, we want to hear from you! Responsibilities • Lead and supervise HVAC installation projects from start to finish., • Install, maintain, and repair residential HVAC systems, including furnaces, air conditioners, and heat pumps., • Ensure compliance with local codes and regulations during installations., • Conduct system diagnostics and troubleshooting to resolve issues efficiently., • Provide exceptional customer service and address client inquiries and concerns., • Train and mentor junior installers and apprentices., • Maintain accurate records of installations, repairs, and service calls., • Collaborate with team members to ensure timely project completion.Qualifications, • High school diploma or equivalent; relevant certifications in HVAC preferred., • Minimum of 3 years of experience in HVAC installation, with a focus on residential systems., • Strong knowledge of HVAC systems, tools, and equipment., • Ability to read and interpret blueprints and technical diagrams., • Excellent problem-solving skills and attention to detail., • Strong communication and interpersonal skills., • Valid driver's license and clean driving record., • Ability to work independently and as part of a team., • EPA Universal or EPA type 2

Job DescriptionBenefits: • 401(k), • Competitive salary, • Dental insurance, • Health insurance, • Paid time off, • Vision insurance About Snack Innovations Snack Innovations is a fast-growing consumer packaged goods company with a passion for better-for-you snacking and the parent brand behind Drizzilicious, Natural Endurance, Smart Fries, and Sunday Snacks. Operating as both a private label manufacturer and direct-to-consumer snack brand innovator, we’re rapidly expanding and looking for driven, entrepreneurial people to grow with us. We are looking for builders and doers who thrive in agile, entrepreneurial environments and are comfortable creating structure where it does not yet exist. The ideal candidate has seen best-in-class operations and knows how to adapt that experience in a fast-moving setting. Role Overview As the Packaging & Sales Graphics Designer at Snack Innovations, you will play a critical production-focused role in bringing our brands to life across packaging, retail, and sales channels. You will support our portfolio of better-for-you snack brands, ensuring every file and asset that leaves our team is accurate, on-brand, and production-ready. You will collaborate closely with Design, Marketing, Sales, Operations, and our external partners to execute packaging, sales enablement tools, and digital assets at the highest level of quality. You'll design and produce a wide range of deliverables, including packaging, PDQs, endcap displays, web assets, A+ content, hero imagery, presentations, and social media content. You'll stay engaged with the latest design trends, emerging technologies (including AI), and evolving industry standards to enhance the effectiveness of our creative output. We're looking for a team player who can take ownership of projects from start to finish while elevating the work at every step. The ability to manage timelines, incorporate feedback, communicate clearly, and collaborate effectively is essential. Core Responsibilities • Responsible for design and production in a wide variety of formats including, print, displays and presentations - with heavy emphasis on packaging., • Lead packaging execution across new and existing SKUs—from concept through production-ready files., • Partner with vendors/printers and internal stakeholders to manage proofing, troubleshooting, and quality control., • Translate dielines, regulatory requirements, and manufacturing specs into accurate, print-ready deliverables., • Create sales enablement assets—including sell-in decks, sell sheets, planogram mockups, displays, shippers, and retailer presentation materials—to support launches and buyer meetings., • Build and maintain clean, scalable file systems and creative libraries.Qualifications, • Bachelor’s Degree, • 5+ years experience in a high volume, deadline-driven environment: CPG industry experience. Technical knowledge in food-grade packaging a plus., • Proven ability to deliver high-quality work with a positive attitude under tight deadlines, • Highly organized, with strong time management, prioritization skills, and LOVEs to take notes., • Ability to work in a fast-paced environment in which requirements & priorities constantly change, • Solid design skills in print, packaging and displays collateral, • Proficiency in Figma, Midjourney, Gemini, and particularly Adobe Creative Suite (Photoshop, Illustrator, InDesign, After Effects, Dimension), • Photoshop: Must be at expert level and know major points of application when applied to Print and Digital. Must be familiar with using application for digital productivity including Smart Objects, Layer Comps and Applying Effects), • Illustrator: Must be at expert level and know major points of application when applied to Print and Digital, • InDesign: Must be at expert level and know major points of application when applied to Print, • A portfolio that demonstrates packaging experience and clean, consistent design execution.

Job Description Mechanical Lead Position Title: Mechanical Lead Location: U.S. Environmental Protection Agency (EPA) Edison Environmental Center, 2890 Woodbridge Avenue, Edison, NJ Work Schedule: Core hours are Monday through Friday, 7:30 AM to 4:00 PM, except Federal holidays; emergency and after-hours support may be required. Reports To: Project Manager / Site Superintendent Position Summary The Mechanical Lead is responsible for leading the operation, maintenance, diagnosis, repair, and preventive maintenance of HVAC&R and related mechanical systems at the EPA Edison Environmental Center. This position supports mission-critical building and laboratory environments, including chillers, boilers, air handlers, refrigeration systems, fume hoods, controls, ductwork, and associated distribution systems. The Mechanical Lead is expected to ensure mechanical system reliability, environmental compliance, and safe operation. Essential Duties and Responsibilities · Lead mechanical and HVAC&R operations, maintenance, and repair activities across the facility. · Operate, maintain, and troubleshoot major equipment including at minimum a 300-ton chiller, 250 BHP boiler, air handlers, refrigeration systems, and generator-related support systems. · Maintain and support laboratory fume hoods and specialized air handling/exhaust systems to ensure proper functionality and safe operation. · Perform diagnostics, parts replacement, corrective repairs, and preventive maintenance in accordance with OEM recommendations, EPA schedules, and contract requirements. · Conduct testing, adjusting, and balancing (TAB), vibration analysis, and oil analysis to optimize equipment performance and uptime. · Calibrate, sequence, and troubleshoot pneumatic, electric, and BAS/DDC control systems. · Size, install, and troubleshoot packaged HVAC equipment, window A/C units, and related mechanical components. · Size, fabricate, and install sheet metal and ductwork; perform testing and balancing to meet design criteria. · Use CMMS tools and maintenance records to plan, document, and improve preventive maintenance and corrective work activities. · Maintain environmental compliance when handling, dispensing, or recovering refrigerants, including refrigerant logs, leak protocols, and safe recovery procedures. · Support emergency mechanical repairs and after-hours response requirements as needed. Minimum Qualifications · Five (5) years as a licensed HVAC&R technician. · New Jersey Black Seal experience/licensure. · Experience with at minimum a 300-ton chiller, 250 BHP boiler, air handlers, laboratory fume hoods, refrigeration systems, and generator systems. · Experience performing diagnostics, parts replacement, corrective repairs, and preventive maintenance for commercial or laboratory mechanical systems. · Proficiency with pneumatic and electric/BAS controls, including calibration, sequencing, and troubleshooting. · Experience sizing and installing HVAC equipment, sheet metal, and ductwork, and performing testing, adjusting, and balancing to design criteria. · Knowledge of refrigerant handling, environmental compliance, refrigerant logs, and leak-response protocols. Preferred Qualifications · EPA Section 608 certification or equivalent refrigerant handling certification. · Experience supporting federal, laboratory, research, or mission-critical facilities. · Experience with CMMS systems, vibration analysis, oil analysis, and predictive maintenance practices. · TAB-related experience or certification. · OSHA safety training and strong knowledge of safe work practices in occupied federal facilities. Supervisory Responsibility · May provide work direction, technical leadership, and oversight to HVAC/mechanical technicians and assigned support personnel. Additional Requirements · Must demonstrate professional conduct, reliable attendance, and the ability to work safely in a secure federal facility environment. · Must comply with all applicable Federal, State, Agency, OSHA, and site-specific safety and security requirements. · Must support emergency response, preventive maintenance, reporting, and continuity of operations requirements under the contract.

Job Description The HVAC Sales Representative is a high-impact role focused on driving the growth and profitability of FirstCall Mechanical’s service division. Your primary mission is to bridge the gap between complex facility needs and our technical solutions, establishing long-term, profitable relationships with new commercial clients. You will serve as a consultant to Facility Directors, offering innovative service agreements that prioritize sustainability and modern digital efficiency. Key Responsibilities Business Development & Networking • Prospecting: Execute a disciplined sales process to identify and qualify high-potential leads., • Network Building: Leverage market trends and professional networks to generate referrals and schedule discovery appointments., • Strategy: Design and implement territory-specific marketing plans that align with FirstCall’s growth goals. Consultative Sales Process • Needs Discovery: Perform deep-dive sales calls with Facility Directors to identify mechanical pain points, inefficiencies, and equipment risks., • Solution Engineering: Pitch creative service solutions, focusing on renewable maintenance agreements, decarbonization, and digital service monitoring., • Closing: Finalize proposals and secure commitments by positioning FirstCall Mechanical as the premier choice for facility health. Account Management & Operations • Lifecycle Management: Lead customer kick-offs, manage contract renewals, and identify "pull-through" opportunities for equipment upgrades., • CRM Integrity: Maintain accurate account records, progress reports, and sales data using the BuildOps platform., • Liaison: Coordinate with the service team to ensure seamless delivery and assist with customer issues or collection support when necessary. Qualifications & Skills • Experience: 2–3 years of progressive sales experience, ideally within HVAC Retrofit and Preventative Maintenance (PM) sectors., • Technical Proficiency: A solid understanding of Building HVAC systems and an aptitude for technical details., • Communication: Superior presentation skills with the ability to "speak the customer's language" in both 1-on-1 and group settings., • Discipline: Proven familiarity with professional sales methodologies and rigorous follow-up standards.

Job Description About Us: Sugaring NYC Somerset is an organic waxing studio specializing in sugaring hair removal, brow lamination, and lash lifts. We’re dedicated to providing a toxin-free, cruelty-free, and empowering self-care experience. We’re looking for a Lead Esthetician to lead our team and ensure top-quality service for our clients. About the Role: The Lead Esthetician is a hands-on leader who ensures smooth daily operations, maintains high service standards, and fosters a positive team culture. This role combines technical expertise in sugaring and beauty services with strong leadership, training, and customer service skills. You’ll be the bridge between our estheticians and management, ensuring a welcoming and hygienic environment while supporting scheduling, inventory, and team performance. Key Responsibilities: Team Leadership & Training • Supervise and mentor Estheticians to maintain service excellence., • Train new hires and provide ongoing development for existing staff., • Address service-related concerns and client feedback professionally. Salon Cleanliness & Maintenance • Ensure treatment rooms and common areas meet the highest hygiene standards., • Delegate and oversee daily cleaning routines., • Perform routine inspections to maintain equipment and safety standards. Client Experience & Retention • Build strong relationships with clients to encourage return visits and memberships., • Handle escalated client concerns to ensure satisfaction. Inventory & Quality Control • Monitor and report stock levels for treatment products and tools., • Ensure staff follows company protocols for all services (e.g., sugaring, lash lifts, brow lamination)., • Conduct service quality checks. Scheduling • Assist with shift coverage and staff scheduling. Requirements: ✅ 3+ years of experience in sugaring or a related beauty service. ✅ Valid Esthetician or Cosmetology License issued by the New Jersey State Board. ✅ Strong leadership and mentorship abilities. ✅ Excellent communication and customer service skills. ✅ Ability to multitask in a fast-paced environment. ✅ Detail-oriented with a commitment to hygiene and safety standards. Why Join Us? • Be part of a growing, women-owned business focused on organic self-care., • Competitive pay + tips + performance bonuses., • Ongoing professional development and growth opportunities., • Work in a fun, empowering, and toxin-free environment! Ready to lead our team and help redefine self-care? Apply now!

Job DescriptionMiddle School Tennis Coach Location: Stuart Country Day School Season: Fall 2026 Start Date: August 16, 2026 End Date: November 11, 2026 Compensation: $5,000 Stipend Schedule: Approximately 6 hours per week Transportation Required: No About the Role Stuart Country Day School is seeking an enthusiastic and dependable Middle School Tennis Coach to lead and inspire student-athletes during the Fall 2026 season. This is an exciting opportunity for a coach who is passionate about teaching the game, fostering sportsmanship, and creating a positive team culture where players can develop both on and off the court. The ideal candidate enjoys working with middle school-aged athletes, emphasizes skill development and character, and is committed to helping every player build confidence while cultivating a lifelong appreciation for tennis. Responsibilities • Plan and lead engaging practices focused on fundamental tennis skills, footwork, strategy, and match play., • Foster a positive, inclusive, and supportive team environment that promotes sportsmanship, respect, and personal growth., • Prepare athletes for practices and interscholastic competitions throughout the season., • Teach proper technique while encouraging effort, improvement, and teamwork., • Supervise student-athletes during practices and matches while maintaining a safe environment., • Communicate effectively with players, families, and school administration regarding schedules and team expectations., • Uphold Stuart Country Day School's values and athletic department standards at all times. Qualifications, • Previous coaching or competitive tennis experience preferred., • Experience working with middle school or youth athletes is a plus., • Strong leadership, communication, and organizational skills., • Ability to motivate and mentor student-athletes of varying skill levels., • Commitment to creating a positive, safe, and development-focused athletic experience., • Ability to pass all required background checks and meet school hiring requirements. Why Coach at Stuart Country Day School?, • Make a lasting impact on young student-athletes during an important stage of their development., • Help players develop technical skills, confidence, and a love for the game., • Join a supportive school community that values athletics, leadership, and character development., • Competitive $5,000 seasonal stipend with a manageable commitment of approximately 6 hours per week.

Job DescriptionDescription: An exciting opportunity to join the team of a progressive YMCA located in vibrant Somerset County, New Jersey. The YMCA is one of the nation’s leading nonprofit organizations dedicated to strengthening communities through youth development, healthy living and social responsibility. With a 150-year-old history, Greater Somerset County YMCA (GSCY) is a pillar of the community and has seven locations across three counties, which collectively serve upwards of 30,000 individuals. GSCY has 100 full-time and 950 part-time employees along with operating revenues to $22+ million. The Y empowers everyone—no matter who they are or where they are from. To fulfill our purpose of strengthening community for all, GSCY is committed to being an inclusive organization and leveraging our collective impact to address social inequities. To learn more about GSCY, visit our website: http://gscymca.org POSITION SUMMARY Camp SOAR Franklin Camp SOAR is seeking a Senior Camp Counselor to support the work of the Y, a leading nonprofit committed to strengthening community through youth development, healthy living and social responsibility. Provides direct supervision of a group of children in a seasonal day camp. Creates positive, nurturing relationships with children, while building cooperative relationships with parents/caregivers. Promotes and supports the potential of all youth in programs and facilitates peer-to-peer connections as part of the overall camp experience. ESSENTIAL FUNCTIONS: • Keeps campers focused and engaged in camp activities., • Assist Specialist during activity periods., • Consistently greet campers with a smile and treat them with enthusiasm., • Develop positive relationships with member families and learn why they come to our Y., • Learn camper’s names. Respond to campers needs., • Assist Specialists and all camp staff in carrying out themes, special events, trips, and all camp activities., • Encourage camper’s youth development progress., • Help group maintain camp cleanliness., • Work cooperatively with all camp staff while planning all camp activities., • Perform the above responsibilities in an enthusiastic and committed manner. Do more than the minimum for campers. Treat them as special. Treat campers and fellow staff members with respect., • Use redirection to appropriate activities when needed and use positive reinforcement to commend good choices., • Teach and instill the Four Core Values of the YMCA in all camp activities: Caring, Respect, Honesty, & Responsibility., • Act as requested by the supervisor. SAFETY: • Attend regular staff meetings scheduled by supervisor., • Must attend and complete all required trainings., • At all times uphold camp safety standards. Maintain constant face counts. Will understand and practice risk management and disaster policies and procedures., • Help maintain group control and facilitate lunch time activities., • Must follow all Association Aquatics Policy Guidelines., • Take on designated assignments for aquatic activities. Help expedite arrival and departure from the pool (i.e. dressing rooms, etc.). Follow all YMCA, ACA, and NJ Licensing standards and procedures to ensure the safest and best quality camp and to help maintain ACA accreditation., • Secure and submit all accident reports., • Report all immediate concerns to Camp Director or nearest supervisor., • Follow supervision of bus counselors and help to ensure safety, expedient procedures and fun activities on the bus. Lead bus songs, stories and games. OTHER DUTIES: • Always maintain a professional demeanor, as you are a representative of the YMCA., • Wear Camp T-shirt daily., • Maintain positive attitude, responsibility and self-motivation. Be punctual and reliable., • Create a positive and nurturing learning environment to instill youth development, healthy living, and social responsibility., • Uphold GSCY’s More Quality At The Y principles at all times. Requirements: QUALIFICATIONS: • High school student or equivalent., • Previous experience working with children preferably in a day camp setting, preferably as a CIT., • Interest preferred in one or more of the following areas: outdoor living, archery, boating, camping, songs/music, skits, sports, aquatics, recreational games, etc., • At least 18 years of age., • CPR, First Aid, AED certifications and Child Abuse Prevention training within 30 days of hire date., • Previous experience with diverse populations preferred. WORK ENVIRONMENT & PHYSICAL DEMANDS: • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • Sufficient strength, agility and mobility to perform essential functions and to supervise program activities in a wide variety of indoor and outdoor locations (depending upon the programs)., • Ability to work in a variety of environments, specifically those subject to extreme heat and humidity., • Physically and mentally able to respond to emergencies and administer CPR and First Aid, • Ability to plan, lead and participate in a range of activities in a variety of outdoor/indoor settings. YMCA COMPETENCIES (Leader): • Mission Advancement: Accepts and demonstrates the Ys values. Demonstrates a desire to serve others and fulfill community needs. Recruits volunteers and builds effective, supportive working relationships with them. Supports fund-raising., • Collaboration: Works effectively with people of different backgrounds, abilities, opinions, and perceptions. Builds rapport and relates well to others. Seeks first to understand the other person’s point of view, and remains calm in challenging situations. Listens for understanding and meaning; speaks and writes effectively. Takes initiative to assist in developing others., • Operational Effectiveness: Makes sound judgments, and transfers learning from one situation to another. Embraces new approaches and discovers ideas to create a better member experience. Establishes goals, clarifies tasks, plans work and actively participates in meetings. Follows budgeting policies and procedures, and reports all financial irregularities immediately. Strives to meet or exceed goals and deliver a high-value experience for members., • Personal Growth: Pursues self-development that enhances job performance. Demonstrates an openness to change, and seeks opportunities in the change process. Accurately assesses personal feelings, strengths and limitations and how they impact relationships. Has the functional and technical knowledge and skills required to perform well; uses best practices and demonstrates up-to-date knowledge and skills in technology. Benefits of working part-time at GSCY include: • FREE Individual Membership Access to any YMCA in the Nation., • 10% Discount on most programming at Greater Somerset County YMCA., • Access to one of the leading retirement programs "Y Retirement Fund" from the first day of employment., • Opportunities for professional development, mentoring, growth, and promotion throughout the YMCA Movement., • Supportive and inclusive community for people of all backgrounds and access to Employee Resource Networks. Greater Somerset County YMCA is a drug free work environment. We are an Equal Opportunity Employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, gender expression, national origin, age, protected veteran or disabled status, or genetic information who share our values of Caring, Honesty, Respect and Responsibility.

Description: Job Summary The Senior Environmental Health & Safety (EHS) Manager is a full-time, exempt position at Kashiv BioSciences, LLC, responsible for leading and overseeing comprehensive EHS programs across two sites in New Jersey and Chicago. This role drives the development, implementation, and continuous improvement of initiatives that promote a safe and compliant work environment within a fast-paced biopharmaceutical production setting. The ideal candidate will ensure adherence to all applicable regulatory requirements while fostering a strong safety culture and proactively identifying opportunities to enhance workplace health and safety performance. Essential Duties & Responsibilities • Lead site safety programs and initiatives to promote a proactive safety culture and reduce workplace incidents, • Develop, implement, and maintain EHS policies, procedures, and training programs, • Conduct safety audits and hazard assessments within a manufacturing environment, • Ensure compliance with OSHA and other applicable regulatory requirements, • Lead incident and near-miss investigations and oversee corrective action implementation, • Track safety performance metrics and support continuous improvement initiatives, • Partner with operations leadership and HR on workers’ compensation and return-to-work processes, • Maintain required safety documentation and reporting, • Collaborate cross-functionally with operations, maintenance, and leadership to drive safety improvements and organizational change, • Employs EHS technical theories to solve practical problems., • Executes multiple, well defined EHS projects/assignments efficiently and documents the results expeditiously., • Becomes familiar with site processes, equipment, and EHS programs and works cross-functionally to complete EHS project work., • Support and maintain environmental and safety programs., • Oversees third party vendors while on site., • Applies established EHS standards and methods to identify, evaluate and control safety, health and environmental hazards present in the work operations and environment., • Evaluates operations to determine compliance with Kashiv BioSciences and governmental EHS standards and regulations., • Performs research and provides information on EHS matters., • Assists with developing and delivering EHS training and communications to persons internal to Kashiv BioSciences., • Assists with EHS program tasks and activities, including industrial hygiene, biosafety, ergonomics, process safety, environmental compliance, EHS inspections, fire protection, loss control, hazardous waste management and assistance with EHS committees., • Identifying latest innovations in EHS risk assessment and reduction, engineering design, operations, and pollution prevention or compliance strategies and making others aware of their potential application to assigned projects. Develop EHS strategies that identify and resolve potential EHS compliance problems before occurrence. Assist in resolving operational failures and inefficiencies that may manifest themselves as EHS deficiencies. Troubleshooting and solving problems relating to site operations systems and equipment., • Organizes daily activities, including technical components, to ensure timely completion of projects/assignments. Documents all work. Performs/supports planning of small EHS projects and interim goals for project completion and assists operational areas in plans to reach EHS compliance objectives. Participates in shutdown planning and scheduling, decontamination and decommissioning., • Works closely with site management and internal customers to assure compliance of ESH issues, equipment and documentation., • Complies with all company policies and standards. Requirements: Position Requirements and Qualifications Education: • Bachelor’s Degree in Safety, Environmental Health, Industrial Hygiene, or a related field (or equivalent experience) Experience: • 10+ years of EHS experience within a manufacturing environment in Pharma/Biopharma, • Strong knowledge of OSHA regulations and safety compliance programs, • OSHA industry training, • Experience leading safety training, audits, and incident investigations, • Experience working in regulated manufacturing environments (such as FDA or cGMP-regulated industries) preferred, • Experience supporting fast-paced production environments utilizing automated equipment or packaging systems preferred, • Ability to work cross-functionally and influence safety initiatives across departments, • Strong communication and collaboration skills with the ability to act as a change agent within operations, • Hazardous shipping guidelines, • Knowledge of MSDS, • Direct experience with regulated environments (e.g., cGMP, OSHA, EPA) preferred., • Experience of working in a highly regulated environment would be a significant advantage. Ideal characteristics: • Remains calm under pressure, displaying a positive, solution driven approach., • Displays key leadership skills, being visible, approachable, and accountable., • Understands Kashiv’s commitments and delivers with passion and urgency., • Act with honesty, integrity and respect for people and goals., • Can prioritize activities and own workload, ensuring vital tasks are recognized and acted upon. Special Skills: • Has Subject Matter Expertise in relevant EHS regulations, principles, pollution control technology, industrial hygiene and safety-related equipment & safeguards. Has basic technical knowledge and works on practical, worker health, safety and environmental problems., • Can effectively interact with team members. Can articulate the issues and solutions to teams upon which participates., • Can identify EHS technical problems, analyze effectively and solve in consultation with supervisor. Learns to develop investigation and problem-solving skills using standard safety engineering and technology techniques., • Can develop, analyze and interpret data., • Can collaborate with others to determine areas of potential risk to business success and generate gap analysis., • Skill to document technical assignments expeditiously., • Capable to work on multiple small projects simultaneously and meet deadlines., • Self-starter to manage workload and meet deadlines set by upper management. Gathers experience in planning work product deliverables to team projects to assure projects stays on track., • Learns application of basic safety engineering and science skills in product or process evaluation under supervisor., • Ability to work with contractors and provide support to others who review/approve and manage external EHS services in meeting business initiatives., • Maintains gowning certification for clean room activities. Work Environment & Physical Demands: General work environment and physical demands as required to successfully perform the essential functions of this job. Ability to work flexible hours as needed. Ability to work under pressure and meet deadlines. Some travel will be involved. Supervisory Responsibility, if any: No This position description is not a complete list of all responsibilities, duties or skills required for the job and is subject to review and change at any time, with or without notice, in accordance with the needs of the organization. PI00e4f426fd89-37820-40298567

ABM is seeking qualified individuals to develop guaranteed energy efficiency projects, renewable energy projects, and other energy savings-related capital improvement projects. This involves identifying, assessing, and structuring technical and financial solutions to meet customer objectives. The qualified individual will have experience with MUSH (Municipal, University, School, and Hospital) market projects, state enabling legislation for energy contracting vehicles, and be proficient in energy, sustainability, water, and emission savings technologies. Pay: $140,000–$145,000 Annually The pay listed is the salary range for this position. Any specific offer will vary based on the successful applicant’s education, experience, skills, abilities, geographic location, and alignment with market data. • Assist the sales staff to screen and qualify the feasibility of energy efficiency and capital improvement opportunities. This involves attending customer meetings, conducting site trips to collect facility and site data, and developing and running energy screening models to determine the technical and economic viability of projects., • Develop, define, and dimension technically and economically feasible applications by performing preliminary engineering/design, project metering, and measurements of critical parameters., • Coordinate with external vendors, manufacturers, and contractors to develop designs and technical proposals for solutions and services., • Develop technical scope of work for selected technologies and manage internal and external engineering resources to determine cost and schedule., • Drive the technical due diligence from initial screen until turnover to the project management group for the implementation phase. This involves identifying known risks (e.g., technical, construction, price, schedule, environmental, warranties, performance guarantees), indicating impact, and how they will be addressed and mitigated., • Perform technical consulting assignments as required to support specific client requests., • Aid project management and construction teams to support the implementation of projects, as required., • Perform the role of lead developer to control expenditures within the limitations of the project budgets and drive the completion of development activities within project deadlines., • Draft, review, and evaluate contract documents, drawings, and schedules., • Manage the preparation of technical drawings, documents, and specifications by subcontractors to the extent required., • Perform initial contact with suppliers/manufacturers for specifications, pricing, and other details., • Perform comparison studies on suppliers’ quotations., • Assist the project management team in negotiations with suppliers on both technical and commercial aspects of products., • Based on clients' budget constraints for any specific project, carry out value engineering studies., • 5 to 10 years of experience in a facility environment or energy management sector., • Working knowledge of building systems, i.e., chillers, boilers, HVAC, and controls., • Experience as a developer on energy performance contract (EPC) projects., • Ability to conduct/assist with ASHRAE Level 1, 2, 3 energy audits., • Conduct field visits to assist with site walkthrough energy assessments and collect detailed information., • Possess highly developed interpersonal, analytical, and communication skills (oral & written)., • Strong organizational and computer skills are necessary, particularly the Microsoft Office Suite., • Experience in energy analysis to identify, screen, and develop energy conservation measures for EPC and design-build projects; develop EMS control strategies to reduce energy consumption; and interface with customer facility personnel., • Ability to plan and manage the development of selected project opportunities and to direct the activities of internal and external resources to achieve deadlines., • Ability to interact effectively across organizational boundaries to achieve goals and meet deadlines., • Measurement and verification skills, including installation of instrumentation for short-term data logging of power and environmental parameters., • Experience in various utility rebate programs offered for electrical and gas efficiency projects is desirable., • Design experience is a strong plus., • PE, CEM, and other certifications are very beneficial. Preferred Qualifications: • Experience developing ESIP (Energy Savings Improvement Program) projects in New Jersey., • Experience with Energy Performance Contracting (EPC) and guaranteed savings projects., • Knowledge of New Jersey public procurement and RFP processes., • Experience supporting municipal, K-12, higher education, healthcare, or other public-sector clients., • Background with an ESCO (Energy Services Company) strongly preferred. Education: • Undergraduate mechanical or electrical engineering (BE, BS) or construction-related degree required., • Advanced degree in engineering or construction management and/or PE preferred. Benefit Information: ABM offers a comprehensive benefits package. For information about ABM’s benefits, visit _ About Us ABM (NYSE: ABM) is one of the world’s largest providers of integrated facility, engineering, and infrastructure solutions. Every day, our over 100,000 team members deliver essential services that make spaces cleaner, safer, and efficient, enhancing the overall occupant experience. ABM serves a wide range of market sectors including commercial real estate, aviation, education, mission critical, and manufacturing and distribution. With over $8 billion in annual revenue and a blue-chip client base, ABM delivers innovative technologies and sustainable solutions that enhance facilities and empower clients to achieve their goals. Committed to creating smarter, more connected spaces, ABM is investing in the future to meet evolving challenges and build a healthier, thriving world. ABM: Driving possibility, together. ABM is an Equal Employment Opportunity (EEO) employer that does not discriminate on the basis of any trait or characteristic protected by applicable federal, state, or local law, including disability and protected veteran status. ABM is committed to working with and providing reasonable accommodation to individuals with disabilities. If you have a disability and need assistance in completing the employment application, please call 888-328-8606. We will provide you with assistance and make a determination on your request for reasonable accommodation on a case-by-case basis. ABM participates in the U.S. Department of Homeland Security E-Verify program. E-Verify is an internet-based system used to electronically confirm employment eligibility. ABM is a military-friendly company proudly employing thousands of men and women who have served in the U.S. military. With ABM, you’ll have access to a world-class training program and ample opportunities to use the skills you developed while serving our country. Whether you’re looking for a frontline or professional position, you can find post-military career opportunities across ABM. ABM directs all applicants to apply at _. ABM does not accept unsolicited resumes. For more information, visit _ About Us ABM (NYSE: ABM) is one of the world’s largest providers of facility services and solutions. A driving force for a cleaner, healthier, and more sustainable world, ABM provides essential services and forward-looking performance solutions that improve the spaces and places that matter most. From curbside to rooftop, ABM’s comprehensive services include janitorial, engineering, parking, electrical and lighting, energy and electric vehicle charging infrastructure, HVAC and mechanical, landscape and turf, and mission critical solutions. ABM serves a wide range of industries – from commercial office buildings to universities, airports, hospitals, data centers, manufacturing plants and distribution centers, entertainment venues and more. Founded in 1909, ABM serves over 20,000 clients, with annualized revenue approaching $8 billion and more than 100,000 team members in 350+ offices throughout the United States, United Kingdom, Republic of Ireland, and other international locations. For more information, visit http://www.abm.com. ABM is proud to be an Equal Opportunity Employer qualified applicants without regard race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected factor under federal, state, or local law. ABM is committed to working with and providing reasonable accommodation to individuals with disabilities. If you have a disability and need assistance in completing the employment application, please call 888-328-8606. We will provide you with assistance and make a determination on your request for reasonable accommodation on a case-by-case basis. ABM participates in the U.S. Department of Homeland Security E-Verify program. E-Verify is an internet-based system used to electronically confirm employment eligibility. ABM is a military-friendly company proudly employing thousands of men and women who have served in the U.S. military. With ABM, you’ll have access to a world-class training program and ample opportunities to use the skills you developed while serving our country. Whether you’re looking for a frontline or professional position, you can find post-military career opportunities across ABM. ABM directs all applicants to apply at http://www.abm.com/ ABM does not accept unsolicited resumes.

Job DescriptionDescription: Job Description: Account Manager – SaaS Retail Software Location: Fully Remote (with annual team events) or able to commute to our NJ office Reports To: Sales Manager Salary Range: $50-70K About the Role We’re looking for a proactive and relationship-driven Account Manager to join our Customer Success team and support a portfolio of existing retail clients using our SaaS retail commerce solutions. If you're passionate about building long-term relationships, driving client growth, and acting as a trusted advisor, this is the role for you. As an Account Manager, you will be the main point of contact for 100–150 SMB retail clients, helping them maximize the value of our software by providing education, strategic guidance, and identifying opportunities for upselling and cross-selling. What You’ll Do Client Relationship Management ? Build strong, lasting relationships with assigned clients through regular check-ins and strategic support. ? Serve as the primary liaison between your clients and our internal teams, ensuring clear communication and timely resolution of issues. ? Understand your clients’ unique business goals, challenges, and use cases to provide tailored guidance. Client Growth & Education ? Educate clients on the full breadth of our SaaS retail offerings—POS systems, eCommerce platforms, mobile apps, marketing tools, and more. ? Uncover upsell opportunities that align with each client's business objectives, and guide them through product expansion. ? Deliver product demos, share best practices, and champion new features to improve client outcomes. Client Advocacy & Retention ? Represent the voice of the client internally, collaborating cross-functionally to enhance the client experience. ? Monitor account health and proactively address risks to drive renewals and long-term retention. ? Meet or exceed upsell and retention goals tied to your book of business. Team Collaboration ? Work closely with Sales, Support, Product, and Marketing to align client needs with company solutions. ? Share insights from the field to help improve our platform and client journey. ? Participate in team summits and company-wide initiatives that drive innovation and collaboration. What You Bring ? 2+ years of experience in Account Management, Client Success, or a related role—preferably in SaaS, retail tech, or B2B services. ? Excellent communication and interpersonal skills—you know how to build rapport and earn trust. ? Strong organizational skills with the ability to manage a high volume of clients without sacrificing quality. ? Comfort with educating clients on technical platforms and presenting tailored solutions. ? Experience with CRM systems (e.g., HubSpot, Salesforce) and virtual collaboration tools. ? Self-starter mindset with a passion for helping businesses grow through technology. ? Able to thrive in a remote-first work environment. Bonus Points ? Experience with POS systems, eCommerce platforms, or retail operations. ? Background in SMB or enterprise SaaS account management. ? Familiarity with HubSpot CRM. Why Join Us? At Celerant Technology, we empower independent retailers with cutting-edge commerce solutions that unify their online and in-store experiences. As an Account Manager, you’ll play a key role in helping retailers succeed while shaping the future of retail tech alongside a collaborative, mission-driven team. We value growth—for our clients and our people. You’ll have opportunities to learn, lead, and make a meaningful impact from day one. Learn more about our company culture How to Apply If you’re passionate about delivering exceptional client experiences and excited to support retailers with powerful technology, we’d love to hear from you. Please submit your resume and a brief cover letter outlining your relevant experience and interest in the role. Requirements:

Job DescriptionBenefits: • 401(k) matching, • Competitive salary, • Dental insurance, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development, • Vision insurance Somerset, Middlesex, Union, Morris, Essex Counties, NJ Salary Commensurate with Experience Position Summary The Senior Commercial HVAC Technician is a highly skilled, field-based professional responsible for the diagnosis, service, repair, commissioning, and optimization of complex commercial HVAC systems. This role requires advanced technical expertise, strong problem-solving skills, leadership in the field, and the ability to work independently while supporting operational excellence and customer satisfaction. This position may serve as a technical lead on jobsites and acts as a mentor to junior technicians and apprentices. Essential Functions & Responsibilities Technical & Trade Responsibilities • Diagnose, repair, and maintain commercial HVAC systems, including:, • Rooftop Units (RTUs), • Split systems, • Chillers (air-cooled and water-cooled), • Boilers (hot water & steam), • Cooling towers, • Make-up air units, • VAV systems, • Heat pumps and VRF/VRV systems, • Perform advanced troubleshooting of:, • Electrical systems (single and three-phase), • Motors, VFDs, contactors, relays, and control boards, • Refrigeration systems, compressors, and metering devices, • Read and interpret blueprints, wiring diagrams, schematics, and control sequences, • Commission new equipment and verify proper operation per manufacturer specifications, • Perform system balancing assistance and airflow diagnostics when requiredControls, Controls Interface & Automation, • Troubleshoot and adjust commercial HVAC controls, including:, • Building Automation Systems (BAS), • Thermostats, sensors, and actuators, • Interface with controls contractors and building engineers, • Verify sequences of operation and proper system responsePreventive Maintenance & Compliance, • Perform scheduled preventive maintenance on commercial HVAC equipment, • Complete accurate service documentation, PM reports, and compliance checklists, • Identify and communicate equipment deficiencies and life-cycle replacement needs, • Ensure all work complies with:, • OSHA safety standards, • EPA regulations, • State and local mechanical codes, • Company safety policies and proceduresCustomer Service & Communication, • Serve as a technical representative of the company on commercial job sites, • Communicate clearly with:, • Property managers, • Facility directors, • Building engineers, • General contractors, • Explain system issues, repair recommendations, and preventative strategies in a professional manner, • Provide detailed repair recommendations and estimates when applicableLeadership & Mentorship, • Act as a field leader and technical resource for junior technicians and apprentices, • Provide on-the-job training and guidance, • Promote safe work practices and quality standards, • Support management with technical input on job planning and system evaluationsAdministrative & Technology Responsibilities, • Accurately complete service tickets, work orders, and time entries using company systems, • Document refrigerant usage and compliance logs, • Maintain truck stock, tools, and equipment in good working order, • Communicate job status, delays, and material needs proactivelyRequirements Required Skills/Abilities: Required Qualifications Education & Certifications • High school diploma or GED required, • EPA Universal Certification required, • OSHA-10 (minimum) preferred; OSHA-30 strongly preferred, • State HVAC license or equivalent (where required by jurisdiction)Experience, • 7+ years of commercial HVAC service experience, • Demonstrated experience working independently on complex commercial systems, • Experience mentoring or leading other technicians preferredTechnical Skills, • Advanced electrical and mechanical troubleshooting, • Strong refrigeration diagnostics skills, • Proficiency with test instruments (meters, gauges, combustion analyzers, etc.), • Ability to read and interpret technical documentation and control diagramsPhysical Demands, • Ability to lift up to 75 lbs, • Ability to climb ladders, work on rooftops, and access confined spaces, • Ability to stand, kneel, crouch, and work in varying weather conditions, • Must be able to wear required PPEWork Environment, • Commercial and industrial facilities, • Rooftops, mechanical rooms, and occupied buildings, • Exposure to weather extremes, electrical hazards, moving mechanical parts, and noiseCompetencies & Attributes, • Strong problem-solving and diagnostic ability, • High attention to detail and quality workmanship, • Professional communication and customer-focused mindset, • Leadership presence and team-oriented attitude, • Reliable, punctual, and safety-driven

Job Description Who We Are: Binsky Home Service, a residential service provider located in New Jersey is seeking a Residential Plumber. Backed by over 85 years of experience, Binsky Home Service has become a trusted name in-home services among our neighbors in central New Jersey. Why We Need You! We need talented individuals, like you, who care about the company and our customers, and can help us continue to grow and succeed! The Role: The Residential Lead Installer works as part of a dynamic and passionate team to demonstrate technical competency and exceed customer expectations by accomplishing the highest quality installations, every time. By working closely with the Installer and Residential Install Manager, you will complete jobs on time and under budget, helping achieve the company’s financial goals. Responsibilities: • Lead install team in all HVAC system installations; be efficient and accurate, • Know how to establish customer rapport to ensure highest levels of satisfaction, • Demonstrate professionalism and knowledge to win new referrals and repeat business, • Maintain communication with office personnel to ensure overall success of the business, • Train and mentor apprentices to ensure on-time, high quality installations, • Participate actively in all formal exercises and on-the-job training, • Complete accurate and timely paperwork; maintain accurate inventory records, • Must be available for an “on-call” rotation Qualifications: • Minimum of 3-5 years experience in residential HVAC install/replacement, • Knowledge of applicable installation and venting codes, • Clean, safe driving record, • Highly organized with exceptional follow-through abilities, • Strong verbal and written communications, • High integrity with advanced social skills and ability to make solid connections, • Strong desire to grow, • Outgoing personality that blends well with fast-paced, goal-driven environment, • Competitive individual contributor who also loves to win as a team, • Highly motivated, self-starter who’s flexible and has a great attitude on life Education and Experience • High School Diploma or GED, • Valid driver’s license with a clean record, • Graduated from HVAC technical program, • EPA Certification Physical Requirements: Physical activity not limited to: climbing, walking, bending, kneeling, lifting <100 lbs. and speaking. Job may require being outdoors or in hot areas for extended periods.

Job Description HVAC Service Manager Unitemp - Somerset, NJ | Full-Time | $120K–$160K base + performance incentives Lead the team. Own the department. Grow with us. For more than 50 years, Unitemp - a division of United Building Solutions - has been the trusted mechanical partner for commercial and industrial clients across New Jersey and New York. Now we're growing faster than ever, and we're looking for an HVAC Service Manager ready to take the wheel of our commercial service department. This is a run-the-business role: your team, your customers, your numbers. If you're a strong technical leader who's ready to stop just fixing problems and start building something, keep reading. Why this role is different • A real seat at the table. You'll collaborate directly with senior leadership on strategic plans and company goals - your voice shapes where this business goes next., • A platform on the move. UniTemp is part of a rapidly expanding mechanical services platform that invests in its people and embraces new technology. Growth here isn't a promise - it's the plan., • Ownership of the P&L. Revenue, profitability, labor utilization, response times - the department's performance is yours to drive, and your results get noticed., • Build the bench. Recruit, mentor, and develop a team of skilled technicians. The leaders you grow become part of your legacy., • 50 years of reputation behind you. You're not cold-calling for credibility - you're leading a service brand customers already trust. What you'll do • Run daily operations of the commercial service department - preventative maintenance, repairs, emergency service, retrofits, and small projects., • Supervise, mentor, and develop a team of HVAC service technicians and support staff., • Coordinate schedules and allocate resources so work gets done on time and done right., • Own departmental performance metrics: labor utilization, response times, revenue, and profitability., • Partner with sales, estimating, and project management to uncover upgrade and expansion opportunities with existing customers., • Build lasting customer relationships that drive satisfaction and repeat business - and step in personally to resolve escalated issues., • Get out in the field regularly to support your techs, evaluate workmanship, and uphold company standards., • Review service reports, proposals, and work orders for accuracy and completeness., • Ensure compliance with company policies, safety regulations, OSHA standards, and applicable codes., • Manage departmental budgets, inventory, vehicles, tools, and equipment., • Recruit, interview, onboard, and retain top service talent - and lead performance evaluations, training, and career development. What you bring • 5–10+ years of commercial HVAC experience, including supervisory or management responsibility., • Deep knowledge of commercial HVAC systems - controls, boilers, chillers, rooftop units, and building automation systems., • Proven experience managing service technicians and coordinating field operations., • Excellent leadership, communication, and organizational skills., • Strong financial acumen - budgeting, forecasting, and P&L management., • Proficiency with service management software, dispatch systems, and Microsoft Office., • Ability to read blueprints, specifications, and technical documents., • Valid driver's license with an acceptable driving record. The package • $120K–$160K base salary + performance incentives, • Health, dental, and vision insurance, • 401(k) with company match, • Paid time off and holidays Ready to lead a skilled team, take care of great customers, and grow with a company that's going places? Apply now for immediate consideration - we move fast, and so should you. Job Posted by ApplicantPro

Job Description HVAC Install Technician - CHOOSE YOUR SHIFT- Up to 150K per year - No On-Call or Mandatory Weekends + up to $10,000 Sign On Bonus!! Are you HVAC Install expert who is passionate about problem solving and customer service? Looking to accelerate your career (and income!) with an organization who values its people? Come see why so many of our team members and customers recommend Horizon! Who are we? We are Gold Medal Services. For over 30 years, we've been the trusted name in plumbing, heating, and air conditioning, offering an unmatched level of customer service and technical expertise. Behind that outstanding customer service and technical expertise sits our people. Our employees are the core of our business and our people-first culture ensures that we can deliver on the Gold Medal guarantee with each and every employee and customer we service. We believe that happy employees = happy customers! What our HVAC Install Technicians do? Our technicians go into clients' homes to install new residential heating and cooling systems. What we offer? Competitive Compensation: • With our tools, resources and training, our Lead technicians are able to make up to $150,000.00 per year - we offer a very competitive base salary and bonus program that rewards you for your hard work and customer service!, • Top candidates could be eligible for a sign on bonus up to $7500! Consistency: • We offer consistent and reliable full-time year round, • Flexible scheduling - Everything from a 9-5 to 4-10's with flexible days of the week. Professional and Personal Growth: • Robust Paid Training & Professional Development Path - 150 hours of training per year!, • Opportunity to grow - We love to promote from within! Most of our leaders started in the truck!, • Qualified technicians will be sponsored for Journeyman license and NATE certification., • Tuition Reimbursement benefits & Scholarship Programs Wellness: • Health benefits including Medical, Dental, Vision, and Life Insurance, • Access to Flexible Spending Accounts for Healthcare or Dependent Care Expenses, • Short Term Disability, • Long-Term Disability, • Wellness Reimbursement Program, • Employee Assistance Program that offers services such as free counseling services, will preparation, and other benefits, • Company-paid PTO and Paid Holidays, • 401(k) retirement plan with company-matching contributions, • Employee Discounts What do you need? • Experience as an HVAC Install Technician, • Relevant licenses and certifications, • A valid driver's license and a clean driving record, • Clean and neat appearance, • Strong customer service and communication skills, • Hard-working and motivated Are you ready to join our team? We understand your time is valuable and that is why we have a very quick and easy application process. If you feel that you would be right for this HVAC Install Technician position, please fill out our initial 3-minute, mobile-friendly application so that we can review your information. We look forward to meeting you! Job Posted by ApplicantPro

Job DescriptionOverview Confidential is seeking an experienced Union Chiller HVAC Service Technicianor an experienced chiller technician willing to join Plumbers and Pipefitters Local 9. The company can sponsor the right candidate into the union and currently supports approximately 50 chiller-service contracts. Responsibilities - Perform preventive maintenance, repair, installation, and replacement of commercial HVAC mechanical equipment and chiller control systems under the direction of the field technical team lead. - Diagnose and resolve building inefficiencies and service-related issues. - Deliver a high level of customer service and communicate clearly with technical and non-technical stakeholders. - Follow customer requirements, safety standards, and local, state, and federal regulations. - Assist with quotes and estimates when appropriate. - Keep customers informed about services performed, outstanding issues, and recommended enhancements, upgrades, or repairs. Qualifications - Current union card with a plumbers and pipefitters local, or willingness to join Local 9. - High school diploma or GED. - At least 3 years of chiller installation, maintenance, or service experience. - At least 5 years of general commercial HVAC maintenance, installation, and repair experience. - Experience with air- and water-cooled chillers and multiple compressor types. - Experience with centrifugal chillers and tear-downs, steam turbines, and high-tonnage equipment. - Absorber experience is a plus. - EPA Universal certification; OEM certifications preferred. - Clear motor-vehicle record and ability to pass drug and background screening. Compensation and benefits - $45-$65 per hour. - Full-time, on-the-road position based around Green Brook Township, NJ. - Company truck and fuel card. - 401(k) matching, retirement plan, health, dental, vision and life insurance, paid time off, and professional-development assistance. refk1

Job Description Home Comfort Systems Installation Supervisor — New Brunswick, NJ Are you the pro who can lead an install start to finish? Can you read a schematic at a glance, coach a junior tech on best practices, and put a homeowner at ease—all in the same day? If so, let’s talk. Why this role? • Lead meaningful residential projects that directly improve comfort and efficiency., • Own the install process, elevate team performance, and build lasting customer trust. What you’ll do, • Supervise and execute residential HVAC installations from planning through startup and handoff., • Install, service, and repair furnaces, air conditioners, and heat pumps., • Verify compliance with local codes and regulations on every project., • Run diagnostics and troubleshoot issues to keep projects moving., • Provide outstanding customer service; answer questions and resolve concerns., • Train and mentor junior installers and apprentices on quality and safety., • Maintain precise records for installs, repairs, and service calls., • Collaborate closely with the team to meet deadlines and deliverables. What you bring, • High school diploma or equivalent; HVAC certifications preferred., • At least 3 years of residential HVAC installation experience., • Strong command of HVAC systems, tools, and equipment., • Ability to interpret blueprints and technical diagrams., • Excellent troubleshooting ability and attention to detail., • Clear, professional communication and teamwork skills., • Valid driver’s license and clean driving record., • Ability to work independently and as part of a crew., • EPA Universal or EPA Type 2 certification. Location New Brunswick, NJ and nearby residential job sites.

Job Description 96 Executive Avenue Edison, New Jersey USAJob Description Work mode : Onsite Interview Process: Onsite interview Position Purpose: A Parts Coordinator ensures that all necessary parts are available when needed, thus avoiding potential delays in production or operations. The role is crucial for minimizing downtime, maximizing productivity, and reducing costs by ensuring the right parts are available when needed. This position is responsible for maintaining accurate inventory of parts and supplies, and supporting administrative tasks that enable efficient communication, scheduling, and recordkeeping across departments. Tasks: Core Responsibilities: Inventory Management: Responsible for tracking, monitoring, and managing inventory levels, ensuring that stock is sufficient to meet demand. Procurement: Order parts from suppliers, negotiate pricing and delivery times, and ensure accurate record-keeping. Distribution: Handle the distribution of parts to mechanics, technicians, and other internal users, ensuring proper documentation and tracking. Cost Optimization: Identify opportunities to reduce costs by negotiating with suppliers, optimizing inventory levels, and minimizing waste. Downtime Reduction: Ensure the timely availability of necessary components to minimize downtime in maintenance and repair operations. Facilitation of Maintenance and Repair: Play a key role in facilitating the smooth functioning of maintenance and repair activities by ensuring the right parts are available when needed. Work closely with suppliers, technicians and outside contractors. Inspect parts for accuracy and quality, ensuring that the right components are received and stored. Provide administrative support to supervisors, managers and teams, handling tasks such as processing invoices and maintaining records. Provide regular reports on parts inventory, usage, and any discrepancies to the supervisor/department lead. In addition to this, the parts coordinator could use CMMS for parts catalog inventory, preferred vendors, supplier sourcing, record keeping, and the easy identification of parts. Additional Responsibilities The parts coordinator is responsible for ensuring the efficient and effective management of parts inventory and procurement for our production lines. This role involves ordering parts based on mechanics' requests, inventorying in-house parts, checking out parts, and occasionally picking up parts from vendors. Parts Coordinator ensures that all necessary parts are available when needed. With the use of technical drawings and equipment diagrams identify parts to order from suppliers, negotiate pricing and delivery times, and ensure accurate record-keeping. Optimal identification of parts to be ordered using measuring tapes, calipers, gauges, thread gauges, hose and fittings sizers etc. Responsible for tracking, monitoring, and managing inventory levels, ensuring that stock is sufficient to meet demand. Responsible for sending parts for repairs, adjustments, calibrations etc. Responsible for the distribution of parts to mechanics, technicians, and other internal users, ensuring proper monitoring of min/max levels. Managing inventory levels in production floor cabinets. Handling and controlling power tools. Handling and controlling machine shop supplies. Implementation of organizational systems for the rapid identification of supplies and items of immediate need. Performs other duties as assigned. Requirements: Education/ Certifications (Required & Preferred): High School Diploma/GED and/or equivalent related experience. Experience: 13 years of experience in parts coordination, administrative support, or production planning in a manufacturing or industrial environment. Knowledge/Skills/ Abilities: Strong organizational and time-management skills with high attention to detail. Proficient in Microsoft Excel, Word, and inventory or maintenance management systems (e.g., CMMS, ERP). Effective communication skills with the ability to work across teams. Basic understanding of manufacturing processes, preventive maintenance, and inventory principles. Good judgment is required for this position as there may be times when direct supervision may not be immediately available. Work Environment: Onsite Role: This position requires the candidate to perform all duties at one of the client locations, such as a distribution center or office. Travel (minor): Contingent Worker Tasks This position may require the candidate to travel to company offices, distribution centers, or other locations for specific meetings or other business reasons. Physical Requirements: Office Roles: Most work is performed in a temperature-controlled office environment. Candidate may sit for long periods of time at a desk or computer terminal. While performing the duties of this job, the candidate is regularly required to sit; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. Candidate may use calculators, keyboards, telephones, and other office equipment in the course of a normal workday. Stooping, bending, twisting, and reaching may be required in the completion of job duties.

Job Description WHO WE ARE At Equiliem, we’re not just a national recruiting firm — we’re an award-winning powerhouse on an exhilarating path of growth. We’re on the lookout for passionate, results-driven individuals seeking to make a real impact. Here, we believe work should feel meaningful — and that’s where you come in. ABOUT THE ROLE As a Sales Executive at Equiliem, you will play a critical role in driving new business across skilled labor and technical staffing. You’ll sell directly into mid-market and enterprise clients. This role is built for a self-motivated hunter who thrives in fast-paced, high-impact staffing environments and knows how to create lasting client partnerships. You’ll have direct access to decision-makers, influence our growth strategy, and the autonomy to build your book of business — without unnecessary red tape.WHAT YOU’LL DO Sales & Business Development • Identify, pursue, and close new business opportunities within the skilled labor and technical staffing space, • Sell staffing solutions including temporary, contract-to-hire, and direct hire placements, • Lead full-cycle sales from prospecting and cold outreach to onboarding and long-term account management, • Build and maintain strong relationships with decision-makers including HR leaders, operations managers, project leads, and safety directors, • Use a consultative, solution-oriented sales approach to engage clients across a variety of industries, • Stay informed on workforce trends and industry-specific challenges to position Equiliem’s solutions effectivelyCollaboration & Strategy, • Partner closely with recruiting teams to ensure timely delivery and strong client satisfaction, • Share client feedback and market insights to refine service offerings and uncover growth opportunities, • Collaborate with senior leadership to influence regional and national growth strategies, • Take ownership in shaping how Equiliem expands its direct-to-client staffing modelSales Process & Accountability, • Build and manage a consistent sales pipeline while tracking activities in the CRM, • Provide accurate forecasts and insights into client activity, hiring needs, and deal progression, • Meet and exceed revenue targets through disciplined prospecting and client development, • Represent Equiliem with professionalism, urgency, and a solutions-first mindsetYOUR BUSINESS IMPACTAs a Sales Executive, your expertise will drive Equiliem’s growth. Your contributions will directly impact:, • Expansion of Equiliem’s staffing footprint, • Revenue growth through new client acquisition and strategic upselling, • Alignment between sales and recruiting teams to deliver high-volume results, • Brand visibility by opening doors and building strong client relationships, • Innovation through continuous feedback and market-driven insightsWHAT YOU’LL BRING, • 3–10+ years of experience in B2B staffing sales with a focus on skilled labor or technical workforce solutions, • Proven success in hunting, closing, and growing accounts, • Strong consultative selling skills and ability to engage with operational leaders, HR teams, and technical stakeholders, • Experience navigating complex client environments and tailoring staffing solutions to meet industry-specific needs, • Ability to work independently, manage a territory, and thrive in a fast-paced, results-driven environment, • Passion for solving workforce challenges and delivering measurable value to clientsCOMPENSATION, BENEFITS & WORK DETAILSBudgeted Salary: $70,000–$100,000 base with commission potential Benefits Package Includes:, Medical, Dental, Vision, STD & Life Insurance, Unlimited PTO, 401(k), 7 Paid Holidays Work Location: Remote - Southeast / East-Coast Role Classification: Exempt EEO EMPLOYER Equiliem is an equal opportunity employer. We do not discriminate or allow discrimination based on race, color, religion, creed, sex, age, sexual orientation, gender identity, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, disability, status as a crime victim, protected veteran status, political affiliation, union membership, or any other characteristic protected by law. Equiliem will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable law. If you have visited our website in search of information on employment opportunities or to apply for a position, and you require an accommodation in using our website for a search or application, please contact our Employee Services Department at support@equiliem.com or (732) 238-6050. #ZR

Job Description Position Overview: This position is responsible for the set-up, repair, preventative maintenance, and operation of equipment to achieve production goals with a high level of detail and accuracy. Key Responsibilities: • Primary trainer for new hires in machine operation including documenting the training., • Lead the productivity, maintenance, and quality of the Muhlbauer equipment., • Complete responsibility of machine start-up, shut down and changeover., • Understand what the expectations are of a work order., • Set up machines as required for specific jobs including new programs, as needed., • Observe machine operations to verify accuracy of machine settings while producing a top-quality product., • Detect malfunctions or out-or-tolerance conditions., • Use precision measuring instruments such as drop gauges and push testers when setting up or adjusting machines., • Inspect "first part" and inspect work pieces throughout the production run for out-or-tolerance conditions., • Ensure Preventative Maintenance is completed and spare parts inventories are maintained., • Pull required fixtures, holding devices and materials, as required., • Minor repairs of machine within capability., • Ensure all documentation is completed properly including, computer logs, maintenance logs and accountability logs. Other Important Responsibilities: • Must be able to operate assigned equipment safely and efficiently., • Must be able to keep record of time spent and materials used., • Must be able to use precision measuring tools and equipment, read schematics, and is familiar with common measuring tools., • Timely Corrective Action response and resolution to relevant situations., • Engage and support companywide Safety and Cleanliness Programs., • Must maintain adequate levels of performance and motivation despite job tasks that are routine, repetitive and/or non-stimulating., • As part of the EMS- Environment Management System, will meet compliance obligations and accountability by contributing but not limited to the company's recycling guidelines, proper waste and other environmental performance practices, • As part of the EMS- Environment Management System, will meet compliance obligations and accountability by contributing but not limited to the company's recycling guidelines, proper waste and other environmental performance practices, • Will be required to perform other job functions, as assigned Qualifications: • Minimum 1-5 years of direct experience in industrial maintenance and repair, • High School or GED Diploma required, Technical School Certification/Degree Preferred, • Ability to independently troubleshoot mechanical and electrical problems using schematics and diagnostic equipment., • Must have knowledge of mathematical skills with all units of measure, using whole numbers, common fractions and decimals, • Must be capable of programming, setting up and maintaining various equipment, • Competencies with pneumatic technology and hydraulics, • Must be able to work with limited supervision and function as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved, • Must hold themselves accountable for doing whatever is needed to meet customer commitments, • Must be able to understand and carry out oral and written directives, • Must have the ability to work under pressure and to adhere to deadlines and to have the ability to be flexible, • Task oriented, ability to prioritize work load, • Enthusiastic attitude, cooperative team player, adaptable to new or changing circumstances, professional demeanor, self-motivated, creative and innovative Physical requirements and work environment: • Must be able to lift 50 lbs, • Must be able to sustain physical work for up to 12 hours per day including the following:, • Standing for up to 12 hours per day, • Reaching and pulling, • Sight, • Walking through shop, • Bending, climbing and crouching., • Shop noise levels are such that protective ear-coverings are recommended, • Short notice, overtime and some weekend demand according to production needs About CompoSecure CompoSecure, a GPGI business (NYSE: GPGI), is the leading manufacturer of Premium Metal Payment Cards and also offers best-in-class Authentication and Digital Asset solutions. The Company's offerings combine elegance, simplicity, and security to deliver exceptional experiences and peace of mind, enabling trust for millions of people around the globe. For more information, please visit www.CompoSecure.com and www.GetArculus.com. We offer a comprehensive benefits package designed to support your health, financial well-being, and work-life balance, including medical, prescription, dental, and vision coverage; FSA/HSA options; company-paid life and disability insurance; 401(k) with company match; paid time off (PTO) and holidays; annual bonus opportunities; an employee assistance program (EAP); and opportunities for career growth and advancement. Additional details will be provided during the hiring process. CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to recruiting@composecure.com.

Job Description Position Overview: This position is responsible for the set-up, repair, preventative maintenance, and operation of equipment to achieve production goals with a high level of detail and accuracy. Key Responsibilities: • Primary trainer for new hires in machine operation including documenting the training., • Lead the productivity, maintenance, and quality of the Muhlbauer equipment., • Complete responsibility of machine start-up, shut down and changeover., • Understand what the expectations are of a work order., • Set up machines as required for specific jobs including new programs, as needed., • Observe machine operations to verify accuracy of machine settings while producing a top-quality product., • Detect malfunctions or out-or-tolerance conditions., • Use precision measuring instruments such as drop gauges and push testers when setting up or adjusting machines., • Inspect "first part" and inspect work pieces throughout the production run for out-or-tolerance conditions., • Ensure Preventative Maintenance is completed and spare parts inventories are maintained., • Pull required fixtures, holding devices and materials, as required., • Minor repairs of machine within capability., • Ensure all documentation is completed properly including, computer logs, maintenance logs and accountability logs. Other Important Responsibilities: • Must be able to operate assigned equipment safely and efficiently., • Must be able to keep record of time spent and materials used., • Must be able to use precision measuring tools and equipment, read schematics, and is familiar with common measuring tools., • Timely Corrective Action response and resolution to relevant situations., • Engage and support companywide Safety and Cleanliness Programs., • Must maintain adequate levels of performance and motivation despite job tasks that are routine, repetitive and/or non-stimulating., • As part of the EMS- Environment Management System, will meet compliance obligations and accountability by contributing but not limited to the company's recycling guidelines, proper waste and other environmental performance practices, • As part of the EMS- Environment Management System, will meet compliance obligations and accountability by contributing but not limited to the company's recycling guidelines, proper waste and other environmental performance practices, • Will be required to perform other job functions, as assigned Qualifications: • A minimum 5 years or more of relevant experience, • High School or GED Diploma required, Technical School Certification/Degree Preferred, • Ability to independently troubleshoot mechanical and electrical problems using schematics and diagnostic equipment., • Must have knowledge of mathematical skills with all units of measure, using whole numbers, common fractions and decimals, • Must be capable of programming, setting up and maintaining various equipment, • Competencies with pneumatic technology and hydraulics, • Must be able to work with limited supervision and function as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved, • Must hold themselves accountable for doing whatever is needed to meet customer commitments, • Must be able to understand and carry out oral and written directives, • Must have the ability to work under pressure and to adhere to deadlines and to have the ability to be flexible, • Task oriented, ability to prioritize work load, • Enthusiastic attitude, cooperative team player, adaptable to new or changing circumstances, professional demeanor, self-motivated, creative and innovative Physical requirements and work environment: • Must be able to lift 50 lbs, • Must be able to sustain physical work for up to 12 hours per day including the following:, • Standing for up to 12 hours per day, • Reaching and pulling, • Sight, • Walking through shop, • Bending, climbing and crouching., • Shop noise levels are such that protective ear-coverings are recommended, • Short notice, overtime and some weekend demand according to production needs About CompoSecure CompoSecure, a GPGI business (NYSE: GPGI), is the leading manufacturer of Premium Metal Payment Cards and also offers best-in-class Authentication and Digital Asset solutions. The Company's offerings combine elegance, simplicity, and security to deliver exceptional experiences and peace of mind, enabling trust for millions of people around the globe. For more information, please visit www.CompoSecure.com and www.GetArculus.com. We offer a comprehensive benefits package designed to support your health, financial well-being, and work-life balance, including medical, prescription, dental, and vision coverage; FSA/HSA options; company-paid life and disability insurance; 401(k) with company match; paid time off (PTO) and holidays; annual bonus opportunities; an employee assistance program (EAP); and opportunities for career growth and advancement. Additional details will be provided during the hiring process. CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to recruiting@composecure.com.

Job Description Whitestone Associates, Inc. is a 100% employee-owned Geotechnical and Environmental consulting firm with offices throughout the eastern United States. We are committed to building a collaborative team environment where employee-owners are encouraged to grow professionally, take on meaningful responsibility, and contribute to the continued success of the organization. Key Responsibilities: • Coordinate, design, and lead environmental efforts on project sites;, • Provide oversight, mentorship, and management of junior staff for specific project assignments, including environmental due diligence investigations and remedial activities;, • Prepare and review comprehensive technical reports for regulatory agencies and project stakeholders;, • Be the LSRP of Record for NJDEP regulatory cases;, • Develop and manage project proposals, cost estimates, and construction specifications for environmental investigation and remediation projects;, • Manage multiple projects and tasks within budgets, schedules, and deadlines;, • Maintain effective and professional communication with clients, subcontractors, and project personnel; and, • Maintaining and broadening client contacts and relationships including pursuing business development opportunities with new, current, and prior clientele. Qualifications: • Bachelors degree in Environmental Science, Geology, Environmental Engineering, or related field;, • Licensed Site Remediation Professional (LSRP);, • 10+ years of relevant experience in Phase I Environmental Site Assessments, Phase II Site Investigations, multimedia sampling (soil, groundwater, soil gas, air, etc.), remedial investigations and actions, and underground storage tank closure;, • Strong analytical and problem-solving skills, with the ability to interpret and analyze complex data sets;, • Excellent written and verbal communication skills, with the ability to effectively present technical information to clients and project teams; and, • Proven ability to work independently as well as collaboratively in a team environment, managing multiple projects and meeting deadlines. Higher compensation than the amount listed below may be offered commensurate with experience and qualifications. Salary Range$125,000—$175,000 USD Benefits: Benefits eligibility is dependent on full-time employment status. • Whitestone's Employee Stock Ownership Program (offered at no cost to each eligible employee), • Medical Insurance, • Dental Insurance, • Vision Insurance, • Health & Dependent Care Flexible Spending Accounts, • Traditional & Roth 401K Plans with Company Match, • Long Term & Short Term Disability Insurance, • Company-Sponsored Life & AD&D Insurance, • Multiple AFLAC Insurance Products, • Pet Insurance, • Identity Theft Protection, • Group Legal Plan, • Multiple Corporate Discount Programs, • Employee Assistance Program (EAP) Whitestone Associates, Inc. is an Equal Opportunity Employer and does not tolerate unlawful discrimination in its employment practices. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, citizenship status, age, disability, protected veteran status, or any other status protected by applicable federal, state, or local law. Whitestone does not tolerate harassment or discrimination based on any protected characteristic. All complaints of harassment are taken seriously and will be investigated promptly and thoroughly.

Job Description Do you want to make a difference in the world? Do you want to help save lives? Come start or continue your career with us! MICRO is a contract manufacturer providing services for companies engaged in life-saving products and solutions. MICRO offers an excellent benefits package, compensation higher than industry average and a full complement of training programs dedicated to give our employees the skills and knowledge required to achieve their career goals. Salary commensurate with experience and skills. So don’t settle for a job when you can have a career that makes a difference! Are you ready to? The Process Engineer II is responsible to ensure the manufacturing processes are efficient, cost effective, meet Micro’s quality standards and yield products per customer specifications. Process Improvement • Improves product quality by reducing process variability., • Develops and optimizes continuous production and manufacturing processes to achieve the output, quality, and cost goals of the organization., • Optimize production cycle time and equipment automation (including robotic programs) to maximize capacity, utilization and quality, • Support execution of transition processes and knowledge transfer from New Product Development to Production through qualification and stabilization processes, • leads continuous Improvement projects from concept development to execution, including conducting DOEs, performing Validations, executing Implementations, and developing metrics to monitor efficiencies, • Support lean manufacturing principal projects, such as 6 sigma, Value Stream Mapping (VSM), DMAIC, Kanban, and comply with Electronic Work Instruction (EWI) principal, • Develops improvements to current manufacturing methods and processes., • Recommends changes or upgrades to equipment, work methods, or other aspects of the process to improve efficiency and utilization of resources including labor, energy and raw materials., • Reads blueprints and aligns manufacturing Processes to drive improvements and troubleshoots difficult and complicated issues effectively., • Reduces product waste improving the utilization of capital equipment, cost of quality and optimizing productivity., • Ensures that sampling plans are reviewed upon changes to the product, process or project., • Provides engineering support in determining root cause and works with Quality Engineers to develop appropriate corrective actions., • Provides input to the production systems and designs control activities., • Provides input for new product equipment selection, installation and maintenance, • Maintains subject matter expertise in specific area(s) and understands complex automated machine operations., • Supports the development of tooling and processes, • Leads projects, teams and complex product transitions. Provides mentorship and support to team members. Process Analysis & Documentation • Responsible for production KPI management (i.e. scrap rate, SPC score, equipment downtime and uptime, product cycle time, machine utilization., • Develop and control Working Standard: Product Structure and Routes, Working Instruction, Procedures, Training Matrix/Modules, • Lead required process qualification planning and executions, • Act as a SME conducting RCAs, focusing on customer quality and delivery demand, apply problem solving and process improvement, and increase customer satisfaction, • Collects production data and applies standard scientific and statistical methods to analyze, document, and diagram production processes. Conducts FMEA, DOE, and SPC analysis, • Use appropriate statistical techniques to analyze data and make/ recommend decisions, • Performs complex data analysis and uses six sigma tools to resolve complex process issues., • Writes detailed work instruction-level documents for manufacturing operations and related areas. Trains personnel in these instructions and other technical process controls (quality engineer), • Develops and documents process operational standards, including identification and deployment of statistical process control opportunities., • Develops all aspects of product and process to improve functionality and launch new products, • Effectively communicates and cooperates with others outside of department boundaries to influence success., • Accurately documents and records necessary data and reports to describe scope of work for sustaining and continuous improvement initiatives. (quality engineer), • Resolves problems and anticipates evolutionary changes in customer requirements and provides corresponding changes in process capability., • Provides equipment design and specifications, including project justification documentation for cost and quality impact., • Quarantines, documents and evaluates products and materials and generates Material Review Board (MRB) Case(s) as appropriate. EDUCATION AND EXPERIENCE • Bachelor’s degree in Engineering or a related field is required., • 3-5 years of engineering experience is required., • Must have demonstrated ability to synthesize complex or diverse information, • Must has experience with blueprint reading including Geometric Dimensioning and Tolerancing (GD&T), Statistical Process Control (SPC), Measurement Systems Analysis (MSA, GR&R), Design of Experiments (DOE)., • Must have statistical software systems and ERP experience., • Experience in equipment automation and robotic programing, metal fabrication or medical device manufacturing is strongly preferred., • Proficient with data analysis, statistics and applied mathematics.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off, • Training & development, • Vision insurance B2B Sales Executive (Full-Cycle / Hunter) Location: North Plainfield, NJ (In-Person) $110,000 – $150,000 base + Bonus + Commission + Full Benefits (Medical, Dental, Vision) + PTO About Avantier Inc. At Avantier, you won’t just “have a job”—you’ll work on real, cutting-edge technology used in aerospace, defense, and life sciences. We are a global photonics company (25+ years), specializing in custom optical design, engineering, and manufacturing for high-tech industries worldwide. Role Overview This is a full-cycle B2B sales role. You will be responsible for generating your own pipeline and closing deals independently, working with technical clients through complex, long sales cycles. We are looking for a results-driven, self-sufficient closer — not a support or account management role. What You’ll Do • Own the entire sales cycle: prospecting → qualification → proposal → negotiation → close, • Generate new business through outbound efforts (cold calls, email, networking, events), • Build and manage a strong pipeline of B2B opportunities, • Sell into technical and enterprise-level clients across industries including aerospace, defense, life sciences, AR/VR, machine vision, robotics, automotive, and advanced industrial applications., • Represent Avantier at trade shows, conferences, and industry events, • Collaborate with internal engineering and leadership teams to deliver solutions Must-Have Qualifications • 3-5 years of B2B sales experience (required), • Proven ability to generate pipeline and close deals independently, • Experience managing long and complex sales cycles, • Strong outbound prospecting skills (cold calling, lead generation), • Excellent communication skills, • Stable work history, • High attention to detail (professional, error-free communication) Nice to Have • Experience selling into technical / industrial / software / engineering sectors, • Demonstrated quota achievement or revenue performance, • Experience with CRM tools (Salesforce, HubSpot, etc.) Education • Bachelor’s degree required Compensation & Benefits • Base Salary: $110,000 – $150,000, • Performance-based Bonus & Commission, • Full Benefits (Medical, Dental, Vision), • Paid Time Off Why Join Avantier • Work on real, high-impact technology, • Direct exposure to engineering and innovation-driven industries, • High-performance, growth-oriented environment, • Opportunity to own deals and drive revenue

Job DescriptionCandidate applying for the role Thorium Digital is a growing digital agency that has provided services to clients from startups to Fortune 500 companies. We are comprised of self-motivated, professionally sharp and team work oriented individuals. You will be working in a collaborative and flat structured environment where there are plenty of opportunities to learn and grow with us. The Senior Front End Web Developer must have a strong technical foundation as well as a full understanding of common coding standards, configuration management, and full life cycle systems development. This individual must have senior and lead level developer experience. The Senior Front End Web Developer is a full-time, hybrid position based out of our East Brunswick, NJ office. The candidate must have minimum 8 years of experience working as a Front End Web Developer, and must have strong experience in React, TypeScript, and working with Node.js and Node.js Frameworks - Next.js, with some backend web experience. Must have experience working with headless CMS solution, Contentful. Must have experience with Website Accessibility and building websites meeting WCAG 2.1 A/AA standards. The candidate must be able to work effectively with our client’s technical leads, our other in-house developers, and non-technical staff. This person would have strong communication skills and possess the ability to present complex technical information to a wide range of audiences, from other technical staff to senior management. Individual should be a fast learner of new technologies, be a creative thinker, share skills and information freely, and be able to mentor and train other developers. Essential duties and responsibilities • Participate in the full project delivery, including planning meetings, estimations, design sessions and development., • Deliver project assignments on time, within budget and with high quality., • Understand and analyze project risks and provide risk mitigation., • Work as part of a team to help define technical requirements, explain the capabilities and limitations of various systems, and generate diagrams/documentation for internal and client use., • Provide assistance, training, and/or mentoring to the other developers and other team members. Document daily progress on work items & communicate to appropriate stakeholders., • Work out of hours, when appropriate, to support major implementations or to react to high priority service issues., • Guide development of tools, infrastructure, and processes within the configuration, build and release process., • Decompose high-level information into details and abstract up from low-level information to resolve solution vs. requirements conflicts., • Provide expertise in determining the strategic technical direction and system architecture for projects, as needed., • Translate design materials (Photoshop, Figma, etc.) into HTML/CSS., • Other duties as assigned.Minimum qualifications, • Minimum 8 years of experience working as a Front End Web Developer., • Strong experience in ReactJS, TypeScript, HTML5, JavaScript, and CSS., • Minimum 5 years of React experience., • Strong experience working with Node.js and Node.js Frameworks - Next.js., • Experience working with headless CMS solution. Contentful is preferred., • Experience working with Shopify, experience with Hydrogen is a plus., • Experience with Website Accessibility (WCAG 2.1 meeting A/AA standards)., • Experience with SEO best practices., • Experience with performance optimization techniques for front-end code., • Working knowledge of Figma, Photoshop, and/or Illustrator., • Experience with agile and scrum methodologies., • Be detailed oriented and must be able to multi-task, manage details, and keep sight of overall objectives., • Able to work well under pressure and meet tight deadlines within a dynamic environment., • Must possess an exceptional ability to effectively communicate both verbally and nonverbally, with technical and non-technical personnel., • Strong work ethic, positive attitude, and a desire to work in a challenging position., • Individual must have a strong technical foundation as well as a full understanding of common coding standards and configuration management., • Understand the complete deployment life cycle from design, build, test, and deployment., • Experience with cloud computing configuration and administration (Vercel, AWS, or Azure)., • Experience with platforms like Algolia, Dynatrace, Siteimprove, and Google Analytics is a plus., • Familiarity with one or more version control systems (Git, Bitbucket)., • Technical knowledge of PHP/PHP Frameworks (e.g. Laravel or Lumen), Object-Oriented programming, design patterns, and best practices., • Excellent analytical and creative problem-solving skills., • Experience in Azure DevOps for version control and building pipelines is a plus., • Must be able to work in a hybrid working model (remote and on-site)., • Able to come on site in New Jersey., • Must be able to speak English fluently., • Authorized to work in the US without sponsorship. Powered by JazzHR hjLwr4xbcl

Job Description The Director, Platform Engineering will own the strategy, roadmap, and execution of InvestCloud’s shared platform capabilities across on-prem and AWS. This role provides both technical and people leadership across environments, infrastructure, CI/CD, and platform services that support mission-critical client workloads. You will lead a team of platform engineers and managers responsible for core platform services, AWS architecture, and Infrastructure-as-Code (IaC), while also helping to advance our operational shift to Bangalore. This is a hands-on leadership role: you will own strategy and roadmap, but you are also expected to dive into the details, help resolve critical issues, and directly contribute to design and implementation when needed. The Director is accountable for platform reliability, scalability, security, cost efficiency, and developer experience, partnering closely with Application Engineering, Product, Server Ops, Network, InfoSec, and Corporate Support. This is a hybrid role with regular on-site time to stay tightly aligned with Platform, Server Ops, Product, and other key stakeholders. Key Responsibilities Platform Strategy & Technical Leadership • Own the multi-year platform engineering strategy and roadmap, aligned to Tech Operations, Product, and business priorities., • Define and maintain platform standards, reference architectures, and guardrails for application delivery, CI/CD, infrastructure, networking, and access., • Chair or co-chair platform architecture and change forums for high-impact initiatives, including major AWS changes, CI/CD upgrades, GitLab/Artifactory patterns, and edge and ingress models., • Evaluate and steer adoption of key platform technologies, including AWS services, GitLab, Terraform, and observability tooling, balancing reliability, security, and cost. AWS Architecture & Cloud Platform Ownership • Lead AWS platform architecture for shared services and application workloads, including multi-account structure, landing zones, environment segmentation, shared services, centralized logging, and security., • Guide teams in designing and implementing solutions on AWS, including:, • Networking: VPC, Transit Gateway, peering, routing, and security groups, • Identity & Access: IAM roles, SSO integrations, and least-privilege models, • Core Services: S3, RDS, caching, messaging, and related patterns, • Edge & Ingress: integration with NGINX/other edge components and DNS/TLS standards, • Partner with Server Ops and Network Engineering on hybrid patterns spanning on-prem data centers, Kubernetes clusters, and cloud-native services., • Work with FinOps and Finance to support capacity planning, cost visibility, and optimization for platform services. Infrastructure as Code, Automation & CI/CD • Drive standardization on IaC frameworks, primarily Terraform, for AWS and platform components, including opinionated modules, versioning, and governance., • Ensure CI/CD pipelines, such as GitLab or equivalent, support secure, consistent delivery of infrastructure and application changes across environments., • Promote automation-first approaches for provisioning, configuration, and change execution, reducing manual work and operational risk., • Define and enforce patterns for configuration management, secrets management, and policy-as-code in the platform stack. Core Platform Operations & Bangalore Acceleration • Provide leadership over core platform operations, including:, • Environment lifecycle and configuration, • Platform change management and runbooks, • On-call integration with broader Tech Ops, • Partner with regional leads to advance the operational shift to Bangalore, including:, • Defining scope and ownership for Bangalore-based run/operate functions, • Building repeatable workflows, documentation, and handoffs that enable follow-the-sun operations, • Ensuring strong alignment between NA/EU and Bangalore teams on priorities, standards, and escalation paths, • Maintain a strong incident management and post-incident review culture for platform-related issues. Reliability, Observability & Risk Management • Set and maintain SLOs, SLIs, and error budgets for key platform services., • Ensure robust observability through logs, metrics, traces, dashboards, and alerts for platform components using existing tooling stacks., • Lead response for major platform incidents, coordinating cross-team triage, remediation, and stakeholder communications., • Integrate platform engineering practices with change management and risk processes, including Jira Change Management and CAB/approval workflows. Security, Compliance & Governance • Partner with InfoSec and Risk to embed security-by-design into platform engineering:, • Access models for AWS accounts, CI/CD, artifacts, observability, and data stores, • TLS/certificate lifecycle, edge security, and secure connectivity patterns, • Integration of application and dependency scanning into CI/CD, • Ensure platform changes and architectures meet audit, client, and regulatory expectations, including traceable approvals and evidence., • Support client security reviews, RFPs, and pentest remediation related to platform components. People Leadership & Stakeholder Management • Lead and grow a high-performing Platform Engineering organization, including managers, tech leads, and senior ICs, with a focus on global alignment across the US and Bangalore., • Define org structure, roles, and succession plans that support both build and run responsibilities for the platform., • Set clear goals and expectations; conduct regular 1:1s; provide coaching, feedback, and performance management., • Act as the primary executive-level point of contact for platform topics with Tech Ops, Product, Application Engineering, and Security leadership., • Communicate effectively with technical and non-technical audiences through concise updates on roadmap, incidents, and key metrics. Required Qualifications Experience • 10+ years in platform engineering, DevOps, infrastructure, or SRE roles, including significant AWS experience., • 5+ years in multi-team or multi-region leadership roles, including managing managers and/or large platform charters., • Demonstrated ownership of platform roadmaps and measurable improvements in reliability, delivery speed, and/or cost. Technical Expertise • Deep experience operating hybrid platforms spanning on-prem data centers and AWS., • Strong background with CI/CD and source control, such as GitLab, and modern deployment patterns., • Hands-on understanding of AWS networking, IAM, core data services, and edge patterns., • Proficiency with Terraform and IaC concepts at scale, including modules, state management, and promotion workflows., • Solid grasp of observability, including logging, metrics, tracing, and operational telemetry for distributed systems., • Familiarity with security and compliance requirements for enterprise platforms, including access control, auditability, and segmentation. Leadership & Collaboration • Proven ability to lead and develop distributed engineering teams, including offshore and nearshore locations., • Strong track record collaborating with Product, Application Engineering, Security, and Operations to deliver cross-cutting platform outcomes., • Excellent written and verbal communication skills, including concise executive-level communication. Preferred Qualifications • Experience as a Director or equivalent over Platform, Cloud, or DevOps in a complex enterprise or high-growth environment., • Experience working with financial services or other regulated industries., • Familiarity with Kubernetes and container platforms, GitOps practices, and/or service mesh technologies., • Prior responsibility for Bangalore or similar offshore hubs, including building out run/operate capabilities., • Relevant certifications, such as AWS, Terraform, or Kubernetes, are a plus. Work Model • Hybrid role with primary base in NYC or Warren, NJ., • Regular on-site collaboration days with Platform, Server Ops, Product, and Security stakeholders., • Occasional early/late calls to support collaboration with Bangalore and other regions, as needed. About InvestCloud InvestCloud, a global leader in wealth technology, aspires to enable a smarter financial future. Driving the digital transformation of the wealth management industry, the company serves a broad array of clients globally, including Wealth and Asset Managers, Wirehouses, Banks, RIAs, and Insurers. In terms of scale, the company’s clients represent more than 40 percent of the $132 trillion of total assets globally. As a leader in delivering personalization and scale across advisory programs, including unified managed accounts (UMA) and separately managed accounts (SMA), the company is committed to the success of its clients. By equipping and enabling advisors and their clients with connected technology, enhanced intelligence, and inspired experiences, InvestCloud delivers leading digital wealth management and financial planning solutions, complemented by a dynamic data warehouse, which scale across the complete wealth continuum. In 2024, InvestCloud was named CNBC World’s Top Fintech Company, a proof point of the company’s commitment to innovation and client success. Headquartered in the United States, InvestCloud serves clients around the world. For more information, visit InvestCloud.com. Our Values • Client Connected, • Human Centered, • Technology Forward, • Respect + Integrity, • Excellence The actual salary will vary based on applicant’s education, experience, skills, and abilities, as well as internal equity and alignment with market data. The salary may also be adjusted based on the applicant’s geographic location. Salary range: $200,000 - $230,000. Benefits include medical/Rx, dental, vision, disability, and life/AD&D insurance plans, Flexible Savings Account (FSA), Health Savings Account (HSA), Employee Assistance Plan (EAP), health advocacy, voluntary ancillary plans (accident, critical illness, hospital indemnity, legal, identity theft, auto/home, and pet insurance), 401(k) retirement savings plan with company match, and paid time off. #LI-HJ1

Job Description Attalon / Location Overview Attalon is a leading technology partner to the global aerospace and defense industry, specializing in the physics of light and heat. With over 500 employees in the U.S., Attalon engineers critical optical, laser, and coating technologies that enable systems to see farther, target faster, and survive the harshest environments. From high-energy directed laser systems to satellite optics and hypersonic thermal protection, Attalon equips the warfighter with the advantage of precision. Job Details The Emerging Laser Subsystems Business Unit at Attalon Inc. is seeking a Principal Embedded Software Engineer to help drive the development of next‑generation laser systems for defense applications. In this role, you will collaborate closely with systems, electrical, and optical engineering teams to define software requirements, create interface specifications, and design, integrate, and test embedded software. The Principal Embedded Software Engineer will play a key role in shaping platform and architecture decisions, while remaining hands‑on throughout the entire software development lifecycle to ensure delivery of high‑quality, safety‑critical software. Responsibilities • Architect, design, and document software for assigned programs. Create design documentation including Software Requirements Documents, block diagrams, Software Design Documents, and Interface Control Documents. Works as a member of a cross-disciplinary team of systems engineers, optical engineers, electrical engineers, and FPGA engineers., • Develop software (primarily embedded) to meet the requirements of the system under development. Write software scripts and tools to support software development and system test., • Develop Software Test Plans and support integration and test activities from initial board-level bring-up through final system test., • Participate in writing proposals and providing cost and schedule estimates in support of new business pursuits., • Make accurate detailed work plans for complex embedded systems/projects; take the lead in planning and executing software tasks. Minimum Qualifications • Bachelor’s degree in computer science, electrical engineering, or related field with 12+ years of experience, or Master’s degree with 10+ years of experience in embedded software development with coding in languages including C, C++, • 8+ years of experience architecting, designing and documenting software solutions and interfaces for embedded systems, • 8+ years of experience with board bring-up, hardware/software integration, driver development and debugging embedded systems in lab environment, • Strong understanding of embedded processor platforms and familiarity with microcontrollers (ARM, STMicro or similar), FPGAs and system-on-chip devices Preferred Qualifications • Master’s degree in computer science, electrical engineering, or related technical field with 15+ years of experience in embedded software development, • 15+ years of experience developing software for RTOS and/or embedded Linux environments, spanning microcontroller platforms and device-level interfaces, • Prior experience developing and integrating embedded networking stacks and implementing/debugging serial device drivers, • Prior experience with AMD/Xilinx platforms, including interfacing embedded software with FPGA‑based subsystems, • Prior experience in developing user interfaces (C#, python or similar) for embedded product testing and integration, • Prior experience with high-reliability systems for defense and/or space Equal Opportunity Employer Statement Attalon, Inc. is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. Export Control Compliance This role involves access to technology, materials, software, or hardware subject to U.S. export control laws. Therefore, to be considered, candidates must be classified as a “U.S. Person” under applicable regulations or be eligible for authorization under a U.S. government export license.

Job DescriptionCompany Description BEUMER Group is an international leader in intralogistics, specializing in conveying, loading, palletising, packaging, sortation, and distribution technology across a wide range of industries, including airports, e-commerce, warehousing & distribution, and bulk material handling. We offer the right solution for nearly every logistics challenge. As a family-owned company, BEUMER combines tradition with innovation. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description The Bid Manager is responsible for leading and coordinating the end-to-end bid and proposal process for customer support, service, and lifecycle offerings within the aftermarket automation environment. This role supports service-related commercial activities including maintenance contracts, system upgrades, retrofits, spare parts programs, service-level agreements (SLAs), and long-term customer support solutions for automated material handling systems. Reporting to the Senior Service Operations Manager, the Bid Manager works cross-functionally with Service Operations, Engineering, Field Service, Supply Chain, Finance, and Sales to ensure accurate, standardized, competitive, and executable customer support bids that align with operational capabilities and business objectives. Key Responsibilities Bid & Proposal Management • Lead customer support bid creation, owning scope definition, assumptions, timelines, and submission deliverables, • Drive costing alignment across service labor, travel, spare parts, subcontractors, and tooling to ensure accurate and executable proposals, • Manage the full bid lifecycle for service and support-related proposals, from request receipt through submission and structured handover, • Analyze customer RFPs, RFQs, and service requests to define scope, risks, and cost drivers Cross-Functional & Stakeholder Interface • Serve as the primary interface between technical and commercial teams, including Service Operations, Engineering, Field Service, Supply Chain, Finance, and Sales, • Coordinate internal bid reviews to validate technical feasibility, operational readiness, pricing logic, and financial performance, • Ensure proposed service solutions align with service delivery capabilities, resource availability, and regional constraints. Costing, Pricing & Commercial Support • Develop, validate, and maintain standard pricing logic and costing models for customer support and service offerings, • Support pricing strategy development in collaboration with Service Operations and Finance, balancing competitiveness with margin targets, • Clearly document commercial assumptions, exclusions, risks, and mitigation strategies within proposals Standardization & Continuous Improvement • Standardize proposal templates, service descriptions, and commercial structures to improve speed, consistency, and quality, • Maintain and continuously improve pricing logic, cost models, and bid tools for customer support offerings, • Capture and analyze lessons learned from awarded and non-awarded bids to drive continuous improvement Governance & Handover • Ensure bids comply with internal governance requirements, approval matrices, and quality standards, • Support contract clarification and provide a structured handover to service delivery and operations teams post-award Annual compensation range: $115,000.00 - $125,000.00 The posted salary range reflects the compensation the company reasonably expects to offer for this position. Actual compensation will not be less than the posted minimum and will be based on multiple factors. Qualifications Required Qualifications • Bachelor’s degree in Engineering, Business, Operations, or a related field (or equivalent experience), • 3–7 years of experience in bid management, proposal management, or service commercial roles, • Experience in intralogistics automation, material handling systems, industrial automation, or capital equipment service environments, • Strong understanding of service operations, field service delivery models, and lifecycle support, • Ability to interpret technical documentation and translate it into clear, executable commercial proposals, • Strong project management, communication, and cross-functional coordination skills Preferred Qualifications • Experience supporting automated systems such as conveyors, AS/RS, sortation systems, robotics, or warehouse control software, • Familiarity with service contracts, SLAs, and long-term maintenance agreements, • Experience working in a matrix organization within a service or operations-driven environment, • Proficiency with CRM, ERP, or bid/proposal management tools Key Competencies • Strong organizational and prioritization skills, • High attention to detail and accuracy, • Commercial and operational mindset, • Risk identification and problem-solving capability, • Ability to manage multiple bids simultaneously under tight deadlines Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees: • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most!, • Performance-Based Bonus: Eligibility to participate in our Target Agreement Plan for bonus potential. Equal Opportunity Statement: BEUMER is committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, creed, religion, sex (including pregnancy and breastfeeding), gender, affectional or sexual orientation, gender identity or expression, transgender status, national origin, age, ancestry, disability (mental or physical), veteran status, genetic information, atypical hereditary cellular or blood trait, marital status, civil union status, domestic partner status, or any other status protected under local, state or federal laws - prohibits discrimination, harassment, and retaliation in all aspects of employment. This commitment applies to recruitment, hiring, training, promotion, compensation, benefits, discipline, termination, and all other terms and conditions of employment. By accepting an offer of employment with BEUMER, the employee agrees to abide by all policies and practices that promote a workplace free from discrimination and harassment and acknowledges BEUMER’S commitment to diversity and inclusion.

Job DescriptionRole Overview: The Maintenance Manager is responsible for leading all maintenance operations while ensuring maximum equipment reliability, facility performance, and operational efficiency. This role oversees preventive maintenance programs, equipment repairs, capital projects, CMMS administration, and the daily supervision of the maintenance team to minimize downtime and support production goals. This is a highly hands-on leadership role requiring a proactive professional with strong mechanical expertise and the confidence to make independent decisions regarding equipment troubleshooting, repairs, maintenance priorities, and operational improvements. The ideal candidate is self-directed, requires minimal supervision, and leads by example while maintaining a safe and efficient manufacturing environment. Overtime required; must be available to cover other shifts and weekends as operational needs require. Job Requirements: • Associate's or Bachelor's degree preferred; equivalent experience will be considered., • Minimum 5 years of maintenance experience within a manufacturing or food production environment., • Minimum 3 years of supervisory or management experience leading maintenance teams., • Food or bakery manufacturing experience strongly preferred., • Proven experience managing preventive maintenance programs, CMMS systems, work orders, and maintenance planning., • Strong mechanical troubleshooting skills with the ability to repair, maintain, and evaluate production and warehouse equipment., • Experience with welding, hand tools, power tools, and general fabrication techniques., • Experience maintaining forklifts, material handling equipment, and other manufacturing assets preferred., • Demonstrated ability to work independently, prioritize maintenance activities, and make sound technical decisions with minimal supervision., • Bilingual English/Spanish preferred., • Strong computer skills with experience using CMMS or maintenance management software. Personal Attributes / Skills: • Strong hands-on leadership with a proactive approach to equipment maintenance and problem solving., • Self-motivated with the ability to work independently and make effective decisions without constant supervision., • Strong ownership mentality, accountability, and commitment to equipment reliability., • Excellent leadership, coaching, and employee development skills., • Strong organizational and communication abilities., • Commitment to workplace safety, continuous improvement, and operational excellence. Physical Requirements: • Frequent standing, walking, climbing, bending, kneeling, reaching, and movement throughout the facility., • Ability to lift and carry up to 75 lbs., • Comfortable working in a manufacturing environment with varying temperatures, humidity, noise, and moving machinery., • Ability to safely operate maintenance tools, equipment, and machinery., • Comfortable working around food products, including facilities that process peanuts and tree nuts.Key Responsibilities:, • Lead Maintenance Operations: Oversee daily maintenance activities to ensure equipment reliability, minimize downtime, and support production objectives., • Manage Preventive Maintenance: Develop, schedule, and monitor preventive maintenance programs while ensuring timely completion of work orders., • Supervise Maintenance Team: Recruit, train, coach, develop, and evaluate maintenance personnel while promoting a safe and productive work environment., • Provide Hands-On Technical Support: Troubleshoot complex equipment issues, support mechanics, and make independent maintenance decisions to keep production running efficiently., • Administer CMMS: Manage maintenance records, approve preventive maintenance tasks, work orders, and ensure accurate system documentation., • Manage Inventory & Vendors: Maintain maintenance inventory, coordinate parts purchasing, and work with outside vendors to support equipment repairs and projects., • Ensure Safety & Compliance: Maintain compliance with company safety policies, regulatory requirements, and maintenance procedures while promoting a strong safety culture., • Support Facility Maintenance: Oversee maintenance of production equipment, warehouse equipment, and building systems to ensure operational readiness., • Drive Continuous Improvement: Identify opportunities to improve equipment reliability, maintenance processes, and overall operational efficiency., • Support Production Operations: Provide maintenance coverage during overtime, off-shifts, and weekends as operational needs require., • Perform other job-related duties as assigned. GRIT Staffing & HR Solutions is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees and applicants. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. If you require a reasonable accommodation during the application or interview process, please contact us at eoc@gritstaffinghr.com so we can assist you.

Job DescriptionAt ANS, we’re not just a consulting engineering firm—we’re a team of trailblazers shaping the future of engineering. Recognized as one of the Best Places to Work and Top 10 Hottest Engineering Firms in the US by Zweig Reports, and featured in Inc. 5000’s Top 250 for our staggering 1,748% growth, we’re proud of what we’ve built and where we're headed. We’re allergic to bureaucracy, thrive on innovation, and embrace data-driven decisions. If you love collaboration, creativity, and a fast-paced environment, we might just be your perfect match! Our team includes professionals licensed in over 20 states, with more than 70 years of collective experience. We pride ourselves on fostering a collaborative and supportive work environment that encourages growth and professional development. At ANS, you’ll enjoy paid vacation, sick, and personal time off; support for continuing education and community involvement; and comprehensive healthcare, vision, and dental benefits for eligible employees. What We’re Looking For: We value enthusiasm, curiosity, and a willingness to learn. We welcome candidates with 8-15 years of professional experience who are eager to grow in a supportive environment. What You’ll Do: • Lead design and development of electrical systems for solar and battery storage projects, • Conducting feasibility studies, power system modeling, and electrical calculations, • Creating and reviewing electrical drawings, specifications, and technical documentation, • Analyze designs to ensure compliance with NEC, IEEE, NFPA, and NERC standards, • Stamping engineering drawings., • Providing mentorship and leading teams., • Contributing technical expertise to business development and proposals Must-Haves:, • Bachelor’s in Electrical Engineering (or equivalent) from an accredited institution, • PE Licensure, • Minimum 8 years of experience in Electrical Engineering, • Strong analytical and problem-solving skills, • Proficiency in Microsoft Office (Word, Excel, Outlook), • Passion for renewable energy and sustainability, • Valid U.S. driver’s license and reliable transportation, • Willingness to travel and work flexible hours as needed Nice-to-Haves:, • MS in Electrical Engineering, • Internship or project experience in power systems or renewables, • Involvement in student/professional engineering societies, • Experience with electrical design or consulting Benefits: 401(k) + company match Health, dental, and vision insurance Life insurance Unlimited PTOProfessional development assistance Bonus opportunities Supportive, growth-oriented team environment Why Join ANS? Work on high-impact projects that shape communities and the environment. Be part of a team that values collaboration, mentorship, and professional growth. Gain hands-on field experience while developing technical and project management skills. Enjoy a supportive workplace culture that encourages innovation and creative problem-solving. Take advantage of career development opportunities, including continuing education and industry involvement. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionDescription: JESCO is a premier dealer of heavy construction equipment and technology in the Northeast and Mid-Atlantic regions. We proudly represent John Deere, Wirtgen, Kleeman, Vögele, Hamm, Ditch Witch, Magni, Topcon, and many more products for purchase, rental, parts, and service. Family-owned and operated for more than 50 years, we are hiring to grow our award-winning company! Why JESCO: Join a growing team with a lucrative opportunity in equipment sales. Driven sales professionals will have the ability to achieve uncapped commissions. Apply today and start a long term career with the Down to Earth Equipment People of JESCO! The Territory Manager is responsible for the direct sale of new, used and rental of John Deere Construction & Forestry and Allied Products to assigned accounts. Responsible for all sales activities, from lead generation through quote and close. Build and maintain strong customer relationships focusing on long term mutual growth. Responsibilities • Track construction bid results to identify opportunities with existing accounts and prospects., • Determine customer needs and select applicable equipment configurations to meet customers' technical requirements and applications., • Perform trade evaluations on new quote opportunities., • Perform price calculations and generate customer quotations., • Write bid specifications that favor John Deere products for government agency bids & purchases., • Perform product demonstrations to prospective buyers while effectively communicating features and benefits of our products and services., • Perform Operation & Maintenance training on new equipment deliveries., • Attend and participate in trade shows, conferences and other industry related networking events., • Maintain awareness of pertinent client information including key influencers and decision makers, future purchasing plans, payment or financing preferences and fleet profiles., • Maintain records of customer communications, personal visitations and opportunities in the company CRM system., • Communicate any client information that may affect company decisions to appropriate department personnel as needed., • Assist in the resolution of outstanding accounts receivables or other client concerns or disputes., • Maintain knowledge of competitors’ products and identify and report intelligence on competitors pricing or marketing strategies to management and peers., • Submit a verity of sales reports as required including activities, opportunities, deals pending and adherence to goals., • Maintain current knowledge of JESCO products., • Understand and comply with established guidelines that ensure a safe and healthy work environment. Performance Measures • New and Used equipment Sales, • Rental Revenue, • Gross Profit Margin Achieved, • Market Share, • Number of New Accounts, • Call Frequency Achievement, • Trade Appraisal Detail & Accuracy, • Conflict Resolution, • Product & Selling Skills Learning, • Timely and Accurate Sales ReportingRequirements:, • Five years of proven outside sales experience., • Knowledge of construction and/or industrial equipment operation and applications., • Strong interpersonal and oral communication skills., • Strong presentation skills and professional appearance., • Excellent planning and organizational skills., • Strong written communication skills with exceptional presentation., • Negotiation and business acumen., • Proficiency in Microsoft Office products and CRM systems., • High energy, excellent self-motivation and work ethic. Physical Requirements: • Employee is expected to occasionally operate, demonstrate, climb up and down and walk around the equipment to sell to customers., • Employee should have the physical ability to evaluate equipment for trade., • This includes climbing on the equipment and operating the equipment., • Employee will be expected to drive a vehicle and cover a particular assigned territory., • Driving in a vehicle may be up to 80% of their day., • Employee must be able to travel by air to attend any Sales related or professional development events or as required by the company., • Employee should be able to lift and carry 50 pounds., • Candidates should be able to walk on uneven surfaces and terrain, work in construction site environments to meet with customers on jobsites. Certifications/Licenses: • Valid Driver's License – Candidates must meet JESCO’s outside insurance underwriting requirements. Benefits: • Medical, Dental & Vision Insurance, • 40(k) Plan + Company Match, • Paid Time Off (PTO), • Growth opportunities, • College Savings (529) Plan, • EAP (Employee Assistance Program) – includes three (3) free counseling sessions,·, • Paid Training· Family owned and operated, • Paid Company Holidays, • Discounts on products, • Base + Commission Pay Structure· Company vehicle. Pre-Qualifications for Employment At JESCO • JESCO participates in E-Verify to ensure that all of its employees are legally able to work in the United States., • All job offers are contingent upon the successful candidate completing and passing criminal and other background checks, a physical examination and drug testing, all done at the company’s expense., • All employees required to operate a company vehicle or their own personal motor vehicle as an essential function of their job must meet JESCO’s outside fleet insurance underwriting requirements. We are an equal opportunity employer and prohibit discrimination and harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionAt ANS, we’re not just a consulting engineering firm, we’re a team of trailblazers shaping the future of civil, structural, and geotechnical engineering. Recognized as one of the Best Places to Work and Top 10 Hottest Engineering Firms in the US by Zweig Reports and featured in Inc. 5000’s Top 250 for our staggering 1,748% growth, we’re proud of what we’ve built and where we’re headed. We’re allergic to bureaucracy, thrive on innovation, and embrace data-driven decisions. If you love collaboration, creativity, and a fast-paced environment, we might just be your perfect match! WHY YOU’LL LOVE WORKING HERE- A supportive, dynamic, and innovative team culture.- Opportunities to attend industry events and showcase your skills.- A chance to directly shape the voice and vision of one of the industry’s fastest-growing firms. As our Project Engineer, you’ll be joining our growing civil engineering team. The ideal candidate will collaborate with our multi-disciplinary team to develop a diverse range of renewable energy projects (PV, BESS, HV, Wind).Job Responsibilities: • The role requires strong technical skills in Civil Engineering design including grading, drainage, erosion and sedimentation control, stormwater management and SWPP calculations and reports., • The Project Engineer will be the civil engineering lead on multi-discipline projects and interact directly with our clients. Coordinate with the hydrology, geotechnical, structural and structural engineering teams., • Developing technical solutions for a wide range of projects through the application of engineering knowledge and skills to support permitting and compliance needs for a diverse client base., • Review and supervise calculations performed by others to ensure quality standards are met to stamp construction drawings and reports., • Provide technical leadership for staff that utilize Civil 3D including alignments, profiles, and grading features to produce engineered construction plans., • Assign tasks to junior engineering staff and designers for projects that you are leading., • Provide construction support to our clients.Position Requirements:, • A bachelor’s degree in engineering is required, • Professional Engineer Strongly preferred, • Proficiency in design software such as Civil 3D, HydroCAD., • Experience in renewable energy projects such as solar, wind, or battery storage is highly preferred., • 8-12 years of experience.Benefits:, • 401(k) + company match, • Health, dental, and vision insurance, • Life insurance, • Unlimited PTO, • Professional development assistance, • Bonus opportunities, • Supportive, growth-oriented team environmentIf you’re passionate about clean energy design, precision engineering, and turning data into impact, we want to meet you! Join us in shaping the next generation of solar and battery storage projects—and help transform ANS into the name everyone in renewables knows. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionCompany Description BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletising, packaging, sortation and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description The Solutions Manager has a high-visibility, high-impact, customer-facing role, responsible for developing and executing controls, electrical and software scope of solution within the Logistic Systems division for the BEUMER Group organization in North America. The Solutions Manager plays a critical role in direct collaboration with internal and external stakeholders, focusing on capturing functional requirements, analyzing existing processes, and providing technical expertise in solution design. Further, this position involves collaborating deeply with the Systems Engineering team, providing support for specifications, estimations and proposal development. Key Responsibilities: • Understand and capture functional requirements for end-to-end convey and sortation solutions,, • Assist in developing and mapping functionalities in alignment with customer requirements and specs., • Evaluate a multitude of technologies, software, controls and electrical solutions to identify the most suitable options based on functional requirements, scalability, and cost-effectiveness., • Design solutions after thoroughly analyzing data, customer requirements, objectives of solutions and available technology options in portfolio as well as from partners/suppliers., • Analyze logistics workflows and processes to identify inefficiencies and bottlenecks, proposing optimizations and automation opportunities to improve operational efficiency and reduce costs., • Assist in calculating throughput and system performance of the proposed solutions and compare them against customer goals/objectives., • Identify potential risks and challenges to functionality associated with proposed solutions and recommend mitigation strategies., • Develop comprehensive documentation, user manuals, and training materials for logistics systems, providing training and support to stakeholders as needed., • Support engineering through development of software and controls functional specifications, and description of operations., • Generate estimates and cost calculations based on the functional specification covering electrical, controls and software scope., • Liaise with LS Sales Managers and Marketing in promoting our solutions to clients (calls, visits and marketing material)., • Participate in the hand-over process from sales to operations with focus on clarifying technical scope and solution as agreed in the contracts, • Participate, coordinate and advise the execution teams during the commissioning & integration phases ensuring the controls, electrical and software scope is implemented per approved functional specification., • Prepare, present and participate in customer presentations, meetings, workshops documenting controls and software functionalities. Also, act as the primary point of contact for functionality related topics., • Assist LS sales team to navigate customer RFPs clarifying and simplify stipulated functionalities Qualifications • Bachelor's degree (Masters preferred) in mechanical engineering, Industrial Engineering Technology, Robotics, Supply Chain Management, or related field. Master's degree preferred., • Minimum 10 years' experience in controls, software and electrical scope for warehouse automation, conveying and sorting solutions. Added advantage if served in a similar position/role, • In-depth knowledge of logistics technologies and systems, including PLC (Allen Bradley, Siemens) WCS, TMS, RFID, barcode scanning, EDI, and IoT devices., • Strong understanding of logistics processes, supply chain management principles, and industry best practices., • Excellent analytical and problem-solving skills, with the ability to translate business requirements into technical solutions., • Effective communication and interpersonal skills, with the ability to collaborate with cross-functional teams and communicate complex technical concepts to non-technical stakeholders., • Project management experience, with the ability to lead and manage initiatives from inception to completion., • Relevant certifications such as affiliations with institutions like IEEE or similar are preferred., • Proficiency with MS Office tool set: PowerPoint, Excel, Access etc., • Knowledge/Exposure to simulation tools; ability to develop simulation functionality specs based on customer requirements, • Basic familiarity with CAD & Visio, • Ability to travel as per business needs, up to 40% of the time. Compensation Range: $130,000.00 - $140,000.00 annually The posted salary range reflects the compensation the company reasonably expects to offer for this position. Actual compensation will not be less than the posted minimum and will be based on multiple factors. Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees: • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most!, • Performance-Based Bonus: Eligibility to participate in our Target Agreement Plan for bonus potential. BEUMER is committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, creed, religion, sex (including pregnancy and breastfeeding), gender, affectional or sexual orientation, gender identity or expression, transgender status, national origin, age, ancestry, disability (mental or physical), veteran status, genetic information, atypical hereditary cellular or blood trait, marital status, civil union status, domestic partner status, or any other status protected under local, state or federal laws. prohibits discrimination, harassment, and retaliation in all aspects of employment. This commitment applies to recruitment, hiring, training, promotion, compensation, benefits, discipline, termination, and all other terms and conditions of employment. By accepting an offer of employment with BEUMER, the employee agrees to abide by all policies and practices that promote a workplace free from discrimination and harassment, and acknowledges BEUMER’S commitment to diversity and inclusion. All your information will be kept confidential according to EEO guidelines.

Job DescriptionAbout GenScriptGenScript Biotech Corporation (Stock Code: 1548.HK) is a global biotechnology group. Founded in 2002, GenScript has an established global presence across North America, Europe, the Greater China, and Asia Pacific. GenScript's businesses encompass four major categories based on its leading gene synthesis technology, including operation as a Life Science CRO, enzyme and synthetic biology products, biologics development and manufacturing, and cell therapy.GenScript is committed to striving towards its vision of being the most reliable biotech company in the world to make humans and nature healthier through biotechnology. GenScript Life Science Group is a part of GenScript Biotech Corporation. Founded in 2002 in New Jersey, GenScript Biotech Corporation accelerates innovation in biotech and healthcare by providing researchers and companies with the building blocks needed to develop ground breaking treatments and products. As a cornerstone of the global life science ecosystem, GenScript actively collaborates with a diverse network of partners—from academic institutions to industry leaders—to co-create cutting-edge solutions that redefine service excellence. Guided by its mission to Make People and Nature Healthier Through Biotechnology, GenScript has become a trusted global partner with a team of 5,500+ employees, supporting over 200,000 customers across 100+ countries and regions, including the world's Top 20 pharma companies. Job Title: Senior Product Manager - Protein Services Job Scope: We are seeking an experienced Senior Product Manager to lead the strategy, roadmap, and execution for our protein services and catalog product portfolio. This individual will own the product roadmap, drive lifecycle management, and collaborate cross-functionally to ensure market success. The role demands a strong blend of scientific expertise, business acumen, and data-driven decision-making to translate market insights into actionable product strategies. This role requires deep expertise in product management within life sciences or biotech, along with the ability to translate complex market insights into actionable strategies that deliver commercial impact. Candidates should have a proven track record in product management and the ability to operate at a strategic level while staying connected to execution. Please note that this position is ideally based onsite in Piscataway, NJ; however, remote within the US will be considered. The estimated salary range is $120,000 - $150,000, based on experience. Responsibilities: • Act as the strategic owner of the protein services and catalog portfolio, managing the full product lifecycle and driving portfolio performance, • Define and execute the product roadmap, prioritizing opportunities based on market potential, customer needs, technical feasibility, and business objectives, • Lead new product development from ideation to launch, coordinating with R&D, operations, regulatory, and commercial teams, • Leverage market data, customer feedback, and competitive intelligence to guide strategic decisions, pricing, and positioning, • Collaborate with marketing to build compelling campaigns, content, and messaging that support adoption and brand awareness, • Develop sales enablement tools and training materials in partnership with the commercial team to drive revenue growth, • Utilize strong business and financial acumen to evaluate ROI, track KPIs, and guide portfolio investment decisions Qualifications: • 3+ years of product management experience in the life sciences or biotech industry., • Proven success in translating customer insights into product strategy and delivering market-driven innovation., • Strong understanding of scientific and technical workflows in protein production, CRISPR, synthetic biology, or gene/cell therapy., • Demonstrated experience managing full product lifecycle and leading cross-functional initiatives., • Advanced degree (MS or PhD) in biological sciences, bioengineering, molecular biology, or related disciplines, MBA degree is desired., • Excellent communication, collaboration, and stakeholder management skills, • Strong business and analytical skills, with experience in market analysis, forecasting, and performance tracking., • Professional proficiency in Mandarin Chinese is a strong asset. #LI-IP1 #GS GenScript USA Inc/ProBio Inc. is a proud equal opportunity/affirmative action employer committed to attracting, retaining, and maximizing the performance of a diverse and inclusive workforce. It is the Company's policy to ensure equal employment opportunity without discrimination or harassment based on race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity or expression, age, disability, national origin, marital or domestic/civil partnership status, genetic information, citizenship status, uniformed service member or veteran status, or any other characteristic protected by law. GenScript USA Inc./ProBio Inc. maintains a drug-free workplace. Please note: Genscript USA Inc./ProBio Inc. will only contact candidates through verified application sources. GenScript/Probio does not request personal information from candidates through individual email or any other platform.

Job Description Position Summary This role is for someone who wants more than a job. Were building something real - a portfolio of residential, commercial, and industrial projects across New Jersey - and were looking for a Civil Engineer who wants to be a core part of that story. The right candidate thrives when no two days look the same, takes pride in watching their work go from napkin sketch to ribbon cutting, and wants to work in an environment where growth is expected, not optional. This team moves fast and operates across multiple asset classes on genuinely complex projects. The manager leading this group has deep field experience and is hands-on - expect real collaboration, direct feedback, and active investment in your development. The best engineers here dont just execute; they contribute ideas, challenge assumptions, and make the work better. Thats the standard we hold ourselves to. Key Responsibilities Engineering Responsibilities Technical Contributions Accountable and responsible for quality and quantity of drawings, including signing and sealing work product. Lead civil engineering efforts for site design, grading, utilities, and land development across active project assignments. Own project phases from concept through construction documentation, executing with accuracy and a constructability mindset. Mentor and support junior engineering staff, sharing technical knowledge and setting the tone for a high-performing team environment. Uphold and contribute to the firms engineering standards and workflows in alignment with ownership expectations and industry best practices. Track progress on assigned tasks and communicate status updates to project leads in a timely, organized manner. Project Oversight Collaborate with development, entitlements, construction, and operational teams to ensure engineering designs support project feasibility, budget, schedule, and operational goals. Manage assigned project tasks and costs to support profitability and efficiency across civil engineering engagements. Drive engineering work across multiple simultaneous projects, from master planning and site layout to grading, utilities, and permitting. Ensure compliance with all regulatory codes, municipal zoning ordinances, NJ Residential Site Improvement Standards (RSIS), and agency requirements. Prepare and lead production of concept drawings, drainage reports, sanitary sewer reports, and site investigation reports. Support construction phase services, including review of shop drawings and submittals. Cross-Functional Collaboration Work across development, entitlements, construction, architecture, and other teams to ensure engineering solutions are integrated effectively across all disciplines. Coordinate with municipal agencies, contractors, and project leads to advance approvals and permitting. Partner with architectural and interior design teams so civil engineering design supports the full project vision from site through building. Consultant Vendor Management Coordinate with external civil engineers, surveyors, geotechnical consultants, and other technical specialists. Review civil engineering deliverables, drawings, and specifications at key project milestones. Manage engineering budgets and track consultant deliverables to maintain schedule and cost efficiency. Qualifications Bachelor's degree in Civil Engineering; advanced degree a plus. Minimum 5-10 years of commercial and/or high-density residential site design and permitting experience. Licensed Professional Engineer (PE) in New Jersey preferred; EIT with active pursuit of PE licensure considered. Deep understanding of jurisdictional requirements and municipal land development ordinances. Strong knowledge of NJ Residential Site Improvement Standards (RSIS). Expertise in civil engineering design including site layout, grading, earthwork analysis, ADA compliance, stormwater management, sanitary sewer, water distribution, and soil erosion sediment control. Construction and constructability expertise as it relates to production of design drawings and resolution of field issues. Foundation and geotechnical experience and understanding. Proficiency in AutoCAD Civil 3D and drainage software (StormCAD, Hydroflow, HydroCAD). Proficiency in Microsoft Office Suite including Excel, Word, Outlook, and Microsoft Project. Self-starter with the ability to work both independently and collaboratively within a multidisciplinary team. Strong organizational, written, and verbal communication skills. Experience working alongside consultant teams and supporting coordination of professional services. Company DescriptionProtouch Staffing is a trusted staffing partner specializing in connecting skilled professionals with top employers. While we originally focused on healthcare staffing, we’ve expanded into legal and other domains to meet evolving workforce needs across industries.Protouch Staffing is a trusted staffing partner specializing in connecting skilled professionals with top employers. While we originally focused on healthcare staffing, we’ve expanded into legal and other domains to meet evolving workforce needs across industries.

Job Description Company Overview: Harris Energy Solutions, LLC (HES) offers nationwide Energy Consulting Services, specializing in a wide range of energy management solutions. Our distinguished team includes skilled Engineers, Certified Energy Managers (CEM), Certified Building Commissioning Professionals (CBCP), and Solar Design Specialists. With extensive experience across various facets of energy management, HES excels in services such as building energy modeling, renewable energy consulting, master planning, energy auditing, and building commissioning. Our commitment to excellence and innovation ensures we deliver tailored, cutting-edge solutions that meet the unique energy needs and goals of our clients across the nation. Job Description: The Senior Commissioning Engineer is responsible for leading the commissioning process across all projects, ensuring that building systems are designed, installed, tested, and maintained to perform in accordance with the owner's operational requirements. This role will manage a team of commissioning professionals, collaborate with internal and external stakeholders, and develop strategies to improve commissioning practices and quality assurance across the organization. Key Responsibilities: • Lead and oversee all commissioning activities for new and existing projects across the organization., • Develop and implement company-wide commissioning policies, standards, and procedures., • Develop and oversee the full commissioning process, from design through occupancy and post-occupancy evaluation., • Manage and lead a multidisciplinary commissioning team, including internal staff and external consultants., • Ensure compliance with project specifications, codes, standards, and sustainability guidelines (e.g., LEED, ASHRAE, ISO)., • Coordinate closely with architects, engineers, contractors, and facility operators to integrate commissioning activities into project workflows., • Oversee functional performance testing of all building systems including HVAC, electrical, plumbing, life safety, controls, and specialty systems., • Review design documents and submittals to identify commissioning requirements and influence quality outcomes., • Develop commissioning plans, checklists, test scripts, and final reports for project documentation., • Monitor progress, resolve issues, and ensure commissioning milestones are met on time and within budget., • Identify and resolve system performance issues prior to building turnover., • Lead training sessions for facilities staff on system operations and maintenance., • Track and report on commissioning progress, budgets, and resource allocation., • Lead and manage Measurement and Verification (M&V) activities to validate energy performance, optimize building systems, and ensure alignment with energy goals and design intent. Incorporate M&V activities into Cx Plans and communicate requirements to facilities staff prior to building turnover., • Provide technical guidance and mentorship to team members and stakeholders., • Continuously improve commissioning processes and implement best practices across all projects., • Develop and implement training programs for junior commissioning engineers, including hands-on learning, technical on-boarding, mentorship, and professional development planning., • Promote a culture of technical excellence, accountability, and continuous learning within the commissioning team. Education and Experience Requirements: • Bachelor's degree in Mechanical, Electrical, or Building Engineering, or a related field, • Minimum of 8 years of experience in project management, building systems commissioning, and/or facilities management, with at least 5 years in a leadership or management role., • Certifications Preferred: PE, CCP, CBCP, BCxP, CxA, LEED AP with specialty, PMP, • Experience with energy modeling and M&V frameworks such as IPMVP, • Deep understanding of mechanical, electrical, and controls systems., • Stay current on industry best practices, emerging technologies, and compliance standards (ASHRAE, IEEE, NFPA, etc.), • Proven ability to manage large-scale and complex commissioning projects., • Experience with Data Center/Mission Critical Commissioning and Hospital Commissioning a plus., • Strong leadership, communication, and organizational skills, • Ability to travel to project sites as needed Applicants must be legally authorized to work in the U.S. without the need for current or future employer-sponsored work authorization Job Type: Full-time Pay: $110,000 – $130,000 per year Benefits: • 401(k) (Traditional and Roth options), • 401(k) Safe Harbor, • Medical Insurance, • Dental Insurance, • Vision Insurance, • HSA option, • Paid Time Off, • Paid Holidays, • Profit Share Plan, • Company Covered Disability Insurance (LTD, STD), • Company Covered Life Insurance, • Company Covered Financial Advising Schedule: • 8-hour shift, • Hybrid with 3 office days Work Location: Piscataway, NJ & Whitestone, NY (Hybrid - T/W/Th in office) EEO Statement: All qualified applicants will receive consideration for employment without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, or sex.

Job Description Are you driven to grow, lead, and make a meaningful impact? At Apex, we're building more than a consulting and engineering firm—we're creating a place where your career accelerates, your contributions matter, and your potential is fully realized. We believe your growth is our growth, which is why we invest in your development at every stage of your career. Here, you'll work on projects that shape communities, protect the environment, and create lasting impact, all while being empowered with the autonomy and flexibility to do your best work. Fueled by high quality delivery, exceptional client retention, and strategic acquisitions, Apex Companies continues to rank among the fastest-growing firms in the AEC industry, recently recognized by the Zweig Group for our industry-leading growth. Our success is grounded in strong leadership, a collaborative culture, and a shared commitment to delivering exceptional outcomes. As we continue to grow, we're focused on building a team of high-performing professionals who are ready to lead, collaborate, and push what's possible. At Apex, you don't just join a company, you help shape what comes next. Position: Industrial Hygiene Professional Industry: Science Technical Location: Iselin, NJ Apex Companies, LLC seeks candidates for a full-time, experienced Industrial Hygienist to provide personnel and area exposure assessment services to local, regional, and national clients. Qualified candidates must have the skill, technical experience and training to self-perform or manage industrial hygiene projects ranging from small to large. All candidates must be capable of researching and accurately referencing standards (e.g., OSHA, ACGIH, etc.) and have a working knowledge of health and safety regulations and best practices. Additional requirements include developing cost estimates, preparation of proposals and sampling plans, advising and mentoring junior level staff as well as managing/interfacing with clients (building of relationships). Strong interpersonal and writing skills are necessary. OSHA and previous consulting experience are required. Your Responsibilities as an Industrial Hygiene Professional: You will be responsible for evaluating workplace health exposure risks for a wide variety of clients in various industries. Qualified candidates should have experience performing the following tasks: • Conduct qualitative exposure assessments, including basic characterization, identification of similar exposure groups, and development of sampling plans., • Plan and conduct industrial hygiene sampling surveys for chemical, physical and biological hazards., • Interpret exposure monitoring results and develop appropriate recommendations to control exposures., • Author detailed technical reports supported with sampling, analysis, and/or evaluation data; citation of applicable references, and recommendations to remove or manage the exposure risk., • Recognize and investigate the potential for health effects associated with chemical agents without authoritative occupational exposure limits., • Defines fundamental concepts of inferential and deterministic statistics in order to select appropriate statistical tools (both parametric and non-parametric) to determine exposure outcomes., • Applies statistical techniques to analyze exposure trends over time., • Defines strategies for ongoing exposure monitoring to assure timely identification of deviations in exposure profiles and to ensure controls continue to be effective., • Assesses compliance with state and/or federal health-based standards., • Develops and presents industrial hygiene training programs at client sites., • Supports the performance of indoor environmental quality investigations. What we're looking for: • BS in Industrial Hygiene, Environmental Science, or other related field., • CIH is preferred, • Client facing skills with ability to grow opportunities., • MS or MSPH or MPH preferred but not needed., • 6+ years of experience providing industrial hygiene consulting services or management of industrial hygiene programs including technical writing, technical oversight, and project management., • Certification or eligibility to earn certification in the comprehensive practice of industrial hygiene (CIH) from the American Board of Industrial Hygiene., • Ability to mentor and train staff., • Strong technical writing and communication skills., • Strong safety awareness and a good record and understanding of safe work practices., • Proficiency with Microsoft Office suite. Why you'll love working with us: • Company-subsidized medical and dental, • Company-paid life, short, and long-term disability, • 401k match, tuition assistance, and more, • Cross-training and the ability to work on a variety of projects, • Performance-based bonuses or other incentives, • Working with the best and brightest in the industry, • 2,000+ employee national firm with 70+ locations across the US #LI-MW1 Apex Job Title: Project Manager Req ID: 11573 Annual Expected Pay Range$100,000—$120,000 USD We believe in equality for all and celebrate the diversity and differences of our employees, customers, and communities. We do not discriminate based on gender, race or color, ethnicity or national origin, age, disability, religion, sexual orientation, gender identity or expression, veteran status, or any other applicable characteristics protected by law. Apex aims to make apexcos.com accessible to all users. If you have a disability or special need that requires accommodation to navigate our website or complete the application process, please contact Talent@apexcos.com or (301) 417-0200. Likewise, feel free to reach out to us if you would like to view or discuss Apex policy related to equal employment opportunity or have any related concerns. EO/AA/VEV/Disabled Employer TO ALL RECRUITMENT AGENCIES: Apex Companies does not accept unsolicited agency resumes. Please do not forward resumes for any of our job postings to our career's sites, or to any employees of Apex Companies or affiliates. Apex Companies is not responsible for any fees related to unsolicited resumes.

Job Description At Mobile Air & Power Rentals, we provide innovative cooling, heating, dehumidification, and power solutions for our customers nationwide. We rent out a vast array of equipment, including portable air conditioners, chillers, heaters, and generators, helping clients save time and money while enhancing their operations and memorable events. We are immediately hiring Technical Sales Reps to join our dynamic team. Why Mobile Air? Here are some of the perks & rewards: • Full-time positions, • Take home company vehicle, • Provided technology including phone and computer, • Expense account for business-related costs, • Competitive pay with commissions, • Health, Vision, and Dental Insurance, • Life Insurance, • 401k with company match, • Paid time off (vacation, sick days, holidays), • Career development and advancement potential, • Employee discount programs What you'll do: Lead our market development efforts within one of the largest climate control rental fleets in the nation. This role focuses on building new client relationships and enhancing engagement with existing accounts across various sectors. The ideal candidate is proactive, results-driven, and possesses strong problem-solving skills. Key Responsibilities: • Develop and execute sales strategies to target new markets while maintaining existing client relationships., • Conduct sales calls and presentations to specific customer segments., • Collaborate with teams to provide customized solutions for clients., • Keep accurate records of sales activities, pipeline status, and market trends., • Engage in ongoing training to stay informed about product offerings and industry trends. Requirements: • 3-5+ years of successful outside sales experience, ideally in HVAC or industrial rentals., • Bachelor’s Degree in a related field preferred., • Clean driving record and valid driver's license., • Ability to spend over 90% of time in the field., • Strong understanding of HVAC and electrical systems, with commercial or industrial sales experience preferred., • Familiarity with the construction and engineering processes is a plus., • Knowledge of relevant sectors like Healthcare and Commercial Real Estate is desirable., • Competitive drive, strong organizational skills, and excellent communication abilities. Join our team of dedicated professionals and contribute to the success of our HVAC operations while advancing your career in a fast-paced environment! #LI-Hybrid #LI-RM1

Job Description Are you driven to grow, lead, and make a meaningful impact? At Apex, we're building more than a consulting and engineering firm—we're creating a place where your career accelerates, your contributions matter, and your potential is fully realized. We believe your growth is our growth, which is why we invest in your development at every stage of your career. Here, you'll work on projects that shape communities, protect the environment, and create lasting impact, all while being empowered with the autonomy and flexibility to do your best work. Fueled by high quality delivery, exceptional client retention, and strategic acquisitions, Apex Companies continues to rank among the fastest-growing firms in the AEC industry, recently recognized by the Zweig Group for our industry-leading growth. Our success is grounded in strong leadership, a collaborative culture, and a shared commitment to delivering exceptional outcomes. As we continue to grow, we're focused on building a team of high-performing professionals who are ready to lead, collaborate, and push what's possible. At Apex, you don't just join a company, you help shape what comes next. Your Responsibilities as the Industrial Hygiene & EHS Program Lead: • Handle a diverse portfolio of asbestos, lead, mold and other Industrial Hygiene consulting projects., • Write and review technical reports and proposals., • Prepare and deliver marketing presentations., • Hire and lead subcontractors., • Mentor and train scientific staff and ensure quality work product., • Actively search for new business opportunities., • Lead a mid-sized team of IH staff members who are located in various offices throughout the region., • Ensure safe performance of project work., • Actively develop your own career growth.What we're looking for:, • BA/BS in Environmental Science/Engineering or other related field; Masters Degree is preferred., • 10+ years of experience working within the environmental consulting industry., • 5-10 years as an Industrial Hygiene lead practitioner with experience managing multiple projects throughout the Mid-Atlantic region., • Certified Industrial Hygienist preferred, but not required., • Ability to write and review proposals, budgets and technical reports., • Ability to mentor and train junior staff., • Proficiency with MS Office suite., • Excellent technical communication skills and strong attention to detail., • Excellent safety record and understanding of safe work practices.Why you'll love working for us:, • Company-subsidized medical and dental., • Company-paid life, short, and long-term disability., • 401k match, tuition assistance, and more., • Cross-training and the ability to work on a variety of projects., • Performance-based bonuses or other incentives., • Collaborate with industry-leading professionals who are passionate about their work., • 2,000+ employee national firm with 70+ locations across the US #LI-MW1 Apex Job Title: Program Manager Req ID: 11737 We believe in equality for all and celebrate the diversity and differences of our employees, customers, and communities. We do not discriminate based on gender, race or color, ethnicity or national origin, age, disability, religion, sexual orientation, gender identity or expression, veteran status, or any other applicable characteristics protected by law. Apex aims to make apexcos.com accessible to all users. If you have a disability or special need that requires accommodation to navigate our website or complete the application process, please contact Talent@apexcos.com or (301) 417-0200. Likewise, feel free to reach out to us if you would like to view or discuss Apex policy related to equal employment opportunity or have any related concerns. EO/AA/VEV/Disabled Employer TO ALL RECRUITMENT AGENCIES: Apex Companies does not accept unsolicited agency resumes. Please do not forward resumes for any of our job postings to our career's sites, or to any employees of Apex Companies or affiliates. Apex Companies is not responsible for any fees related to unsolicited resumes.

Job DescriptionBenefits/Perks • Highly enriched & healthy work environment, • Excellent growth opportunities, • Competitive Pay, • Career AdvancementJob SummaryWe are seeking an experienced Quality Assurance Specialist to join our team. In this role, you will be responsible for overseeing the quality of goods and services our company provides. You will perform routine inspections, implement quality assurance policies and procedures, and identify any workflow issues. The ideal candidate is an excellent verbal and written communicator with strong attention to detail. Position Summary The Quality Assurance Specialist – Clinical Trial Supply plays a critical role in ensuring the quality, safety, integrity, and compliance of clinical trial materials throughout their lifecycle—from receipt and storage to packaging, labeling, distribution, and returns. This role supports GxP operations, oversees Quality System activities, and collaborates cross-functionally with Operations, Warehouse, Packaging, Project Management, and external suppliers/CROs to maintain compliance with FDA, EU-GMP, GDP, ICH-GCP, DSCSA, and internal JRS standards. The QA Specialist ensures that all products and processes meet regulatory and customer expectations while supporting JRS’s mission to deliver reliable, resilient, and high-quality clinical supply solutions worldwide. Key Responsibilities 1. Quality Systems & Compliance • Ensure compliance with GMP, GDP, GCP, ICH, FDA, EMA, MHRA, TGA, CDSCO and JRS internal SOPs., • Review, approve, and maintain controlled documents including SOPs, Work Instructions, Forms, Batch Records, Labeling Specs, and Packaging Records., • Support implementation and continuous improvement of Quality Management Systems (QMS) including Deviation Management, CAPA, Change Control, Training, and Document Control., • Participate in internal audits, customer audits, vendor qualifications, and regulatory inspections. 1. Clinical Supply Chain Quality Oversight • Perform QA review and approval of:, • Incoming clinical supplies (comparator drugs, IMPs, ancillary supplies), • Packaging and labeling activities, • Storage and temperature monitoring records, • Distribution documentation including shipping records, AWBs, and temperature logger data, • Verify completion and accuracy of Line Clearance, Batch Packaging Records (BPR), and Label Control Logs., • Review and approve EPCIS/DSCSA traceability files, CoA/CoC, pedigrees, and other regulatory documentation. 1. Investigations & Deviation Management • Lead or support investigations for:, • Temperature excursions, • Packaging or labeling discrepancies, • Shipment issues, • Supplier or customer complaints, • Perform root cause analysis (RCA), risk evaluation, and implement effective CAPAs. 1. Vendor & Customer Quality Support • Support supplier qualification by reviewing:, • GMP/GDP licenses, • ISO certifications, • Quality Agreements (QTA), • Questionnaires and risk assessments, • Collaborate with customers to ensure project-specific quality requirements are met. 1. Documentation & Regulatory Support • Ensure accurate completion of QA documentation related to:, • Clinical supply release, • Temperature-controlled shipping, • Storage of controlled and non-controlled materials, • Destruction, return, and reconciliation, • Maintain updated Quality and Technical Agreements (QTA) with clients and suppliers. 1. Training & Continuous Improvement • Deliver and maintain training programs for QA and Operations teams on:, • GDP/GMP compliance, • SOP revisions, • Packaging and labeling quality requirements, • Temperature control best practices, • Participate in continuous improvement initiatives to enhance operational efficiency and compliance. Required Qualifications • Bachelor’s degree in Life Sciences, Pharmacy, Biotechnology, Chemistry, or related field., • 2–5 years of experience in Quality Assurance within Clinical Trial Supply, Pharmaceutical, Biotech, CRO, CDMO, or GMP/GDP warehouse environment., • Strong understanding of GMP, GDP, GCP, DSCSA/EPCIS, ICH guidelines, and clinical supply chain processes., • Experience with deviations, CAPA, change control, labeling review, packaging operations, and QA release. Preferred Qualifications • Experience working with temperature-controlled logistics (2–8°ree;C, -20°ree;C, CRT)., • Knowledge of comparator sourcing workflows and global distribution practices., • Familiarity with Quality Agreements, Supplier Qualification, and Vendor Audits., • Experience with Power BI, SharePoint QMS, and ERP/WMS systems., • Certification in GMP/GDP/GCP (optional but advantageous). Core Competencies • Strong attention to detail and documentation accuracy., • Excellent communication and problem-solving skills., • Ability to work cross-functionally and manage multiple priorities., • Proactive, organized, and committed to quality and compliance., • Ability to make decisions based on risk, data analysis, and regulatory expectations. Why Join Jupiter Research Services? • Work in a rapidly growing organization focused on resilient clinical supply chain solutions., • Gain exposure to global clinical trials, high-impact projects, and innovative supply models., • Contribute to a compliance-driven organization with strong customer and patient-centric values., • Opportunities for growth in Quality, Operations, Regulatory, and Project Management.

Job Description Position Overview: We are seeking a skilled EMV Smartcard Developer to design, develop, and optimize embedded firmware for smart card and secure element applications. This role will involve working with JavaCard technology, cryptographic algorithms, and secure hardware environments to develop high-performance, secure, and compliant solutions for payment, identity, and access control applications. The EMV Smartcard Developer will be expected to work on-site five days a week in our Somerset, NJ office. Key Responsibilities: • Deliver technical expertise and product knowledge to sales teams and customers through presentations, demonstrations, and training sessions., • Conduct customer visits to provide consulting and training on technical solutions and offerings., • Coordinate internal departments (R&D, Tech Support, Sales, and Production) to manage customer-initiated new product development projects., • Ensure alignment and timely execution of all technical deliverables throughout project lifecycle., • Act as a technical backup to other team members by providing documentation, guidance, and training to support internal stakeholders, partners, and customers., • Serve as the technical lead for EMV product development, including chip profile definition, key management, and chip personalization specification., • Maintain direct technical relationships with customer and partner organizations at various levels., • Provide end-to-end technical involvement across internal departments and external entities (e.g. Visa, Mastercard) from solution proposal through deployment, ensuring security compliance and robust key management., • Deliver training sessions on products and solutions; contribute to proposal and tender documentation., • Offer consultancy, change management support, and troubleshooting for customer production issues and technical inquiries., • Oversee and implement key management protocols and procedures., • Perform other duties as assigned by management. Qualifications: • Bachelor's or Master's degree in Computer Science, Electrical Engineering, or a related field., • A minimum of 5 (or more) years of experience in JavaCard firmware development., • Self-driven, hands-on technology professional with strong analytical and conceptual thinking., • Ability to understand customer and industry needs and translate them into actionable technical solutions and product plans., • Exceptional organizational, problem-solving, and decision-making skills with a results-oriented approach., • Effective at managing multiple high-priority tasks in a fast-paced environment., • Strong interpersonal, communication (written and verbal), and presentation skills., • Fluency in English is required., • Proficiency in French is desirable. Preferred Technical Skills: • Proficient in Smart Card technologies such as Java Card, MULTOS, and EMV., • Understanding of cryptographic methods including symmetric/asymmetric encryption (DES, 3DES, RSA)., • Experience with payment Smart Card services is highly desirable., • Detail-oriented with a focus on consistency and accuracy., • Capable of working independently as well as collaboratively in a team environment About CompoSecure CompoSecure, a GPGI business (NYSE: GPGI), is the leading manufacturer of Premium Metal Payment Cards and also offers best-in-class Authentication and Digital Asset solutions. The Company's offerings combine elegance, simplicity, and security to deliver exceptional experiences and peace of mind, enabling trust for millions of people around the globe. For more information, please visit www.CompoSecure.com and www.GetArculus.com. We offer a comprehensive benefits package designed to support your health, financial well-being, and work-life balance, including medical, prescription, dental, and vision coverage; FSA/HSA options; company-paid life and disability insurance; 401(k) with company match; paid time off (PTO) and holidays; annual bonus opportunities; an employee assistance program (EAP); and opportunities for career growth and advancement. Additional details will be provided during the hiring process. CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to recruiting@composecure.com.

Job Description Job Description Date 2026 Location 1300 Airport Road, North Brunswick NJ Title Associate, Sales - Business Development Department Sales Reports to VP Technical Excellence FLSA (Exempt or Non-Exempt Exempt Role Overview The Associate – Sales & Business Development is responsible for identifying, developing, and securing new business opportunities for the company's Contract Development and Manufacturing Organization (CDMO/CMO) services and product solutions. This role focuses on generating new business within the nutraceutical, dietary supplement, vitamin, pharmaceutical, cosmetics, consumer health, and related industries. The Associate serves as a primary point of contact for prospective customers, building and maintaining a qualified sales pipeline, developing strong customer relationships, understanding client needs, and collaborating with internal technical, operations, quality, and commercial teams to convert opportunities into long-term business partnerships. This position is ideal for a highly motivated, results-oriented individual who enjoys prospecting, networking, and driving business growth. The successful candidate will play a key role in expanding the company's customer base and support revenue growth through strategic business development initiatives. Areas of Responsibility Business Development • Identify, target, and secure new business opportunities within the nutraceutical, dietary supplement, vitamin, wellness, and consumer health markets., • Develop and execute strategic business development plans to expand market presence and generate revenue growth., • Build and maintain a robust pipeline of prospective clients through networking, industry events, referrals, cold calling, and outbound prospecting., • Establish relationships with key decision-makers, including founders, CEOs, brand owners, product development teams, procurement leaders, operations leaders, R&D teams and executive stakeholders., • Analyze market trends, competitive activity, and customer needs to identify growth opportunities., • Represent the company at trade shows, conferences, and industry networking events. Sales & Account Acquisition • Drive the full sales cycle from lead generation through contract negotiation and account onboarding., • Present the company's CDMO manufacturing capabilities, technical expertise, and service offerings to prospective clients., • Develop customized proposals and solutions that align with client objectives and manufacturing requirements., • Coordinate with internal teams to prepare proposals, quotations, capability presentations, and customer responses., • Support contract negotiations and commercial discussions with prospective customers. Consistently achieve or exceed assigned sales and business development targets., • Maintain accurate sales forecasts and pipeline activity within the CRM system. Market Intelligence • Monitor market trends, competitive activity, emerging product categories, and customer needs within the pharmaceutical and nutraceutical industries., • Identify opportunities for new product categories, manufacturing capabilities, and strategic partnerships., • Provide market intelligence and customer feedback to support product and service development initiatives. Cross-Functional Collaboration • Partner with R&D, Operations, Quality, Supply Chain, and Customer Success teams to ensure successful client onboarding and project execution., • Support the transition of new business opportunities into long-term customer partnerships., • Support customer site visits, audits, technical discussions, and project kick-off activities., • Facilitate communication between prospective customers and internal subject matter experts. Reporting and Administration • Maintain complete and accurate customer and opportunity records., • Prepare pipeline, forecast, and business development reports as requested., • Participate in sales meetings, commercial reviews, and strategic planning activities. Other Responsibilities Including Safety: • Works in a safe and responsible manner in order to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements., • Keeps management informed of area activities and of any significant problems. Requirements Education & Qualification: • Bachelor's degree in Business, Marketing, Life Sciences, Pharmaceutical Sciences, or a related field preferred., • 3 + years of business development and sales experience in nutraceuticals, dietary supplements, vitamins, consumer health products, pharmaceuticals, or CDMO/contract manufacturing., • Proven track record of acquiring new clients and generating revenue through business development efforts., • Experience selling contract manufacturing, private-label, or formulation services is highly preferred., • Pharmaceutical industry experience is a plus, particularly with companies involved in consumer health, vitamins, supplements, or wellness products., • Strong network within the nutraceutical, dietary supplement, or consumer packaged goods industry preferred., • Excellent prospecting, negotiation, presentation, and relationship-management skills., • Demonstrated hunter mentality with the ability to independently source and close new business opportunities., • Proficiency in CRM systems and Microsoft Office Suite. Certifications, Licenses, Credentials: • N/A Travel Requirements • Willingness to travel extensively (50–75%)., • Ability to visit prospective clients, attend trade shows, and participate in industry events., • Comfortable with overnight and regional travel to generate new business opportunities. Skills & Ability • Client-obsessed with a strong aptitude in a structured sales approach., • Self-motivated with exceptional talent in closing deals., • Strong knowledge in the complete end-to-end sales cycle (from prospecting to closing)., • Exceptional prospecting/hunter skills and experience., • Experience in pharmaceuticals and/or manufacturing environment is a plus., • Good communication and Email writing skills. Key Performance Indicators (KPIs) Performance may be measured through the following metrics: • New Business Revenue Generated, • Annual Quota Achievement, • Qualified Pipeline Generated, • Number of New Customer Opportunities Created, • Number of Customer Meetings Conducted, • Proposal-to-Win Ratio, • Customer Acquisition Rate, • CRM Data Accuracy and Forecast Reliability, • Strategic Account Development Activities Physical Requirements (lifting, etc.): • Ability to navigate office, lab, and/or plant floor working environments., • Standard office environment without unpleasant or hazardous conditions. Physical demands involved in office work such as the ability to talk, hear, use hands to handle and feel; work on a computer up to 7 hours a day; close vision required for computer usage., • Must have the ability to wear applicable personal protective equipment utilized at this site, including safety glasses/goggles, hairnets, lab coats and safety shoes. Work Environment (Office, Warehouse, temperature extremes, etc.): • Exposed to lab and/or plant floor working environments., • Standard office environment without unpleasant or hazardous conditions., • Temperature controlled for heat and air conditioning. Success Profile The ideal candidate is a highly motivated business developer with a hunter mentality who enjoys identifying opportunities, building relationships, and creating long-term partnerships. This individual is comfortable engaging with entrepreneurs, emerging brands, and established manufacturers, and possesses the persistence, curiosity, and commercial acumen necessary to drive sustainable growth within a highly regulated manufacturing environment. For USPL specifically, I would position this role as a "Business Development Representative" externally but benchmark compensation against a Business Development Manager, since the expectation is to prospect, develop, negotiate, and close CDMO opportunities rather than simply qualify leads. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. Job Description Acknowledgement I have read and understand the job requirements, responsibilities, and expectations set forth in the job description provided for my position. I attest that I can perform the essential job functions as outlined with or without any reasonable accommodation.

Job Description Summary We are currently representing a well-established civil engineering and infrastructure design firm seeking a Senior Civil Engineer with a minimum of 7+ years of experience in highway design, infrastructure improvements, and DOT projects. Based out of their Edison, NJ office, this individual will play a key leadership role in the planning, design, and delivery of transportation projects across New Jersey and the greater Northeast region. This position is ideal for someone with strong technical capabilities in roadway/highway engineering, a deep understanding of DOT standards (NJDOT/NYSDOT), and the ability to lead and coordinate cross-functional design teams. Key Responsibilities Lead and manage highway and roadway design projects for public sector clients (NJDOT, counties, municipalities, etc.) Prepare and review design plans, specifications, and cost estimates for infrastructure improvements Oversee preparation of horizontal and vertical alignments, grading, drainage systems, and utility relocation plans Manage project schedules, budgets, and client communications to ensure on-time delivery Coordinate with internal teams and subconsultants including CAD designers, traffic engineers, and permitting specialists Provide quality control for engineering documents and ensure compliance with agency standards Mentor junior engineers and support staff, including assigning tasks and overseeing technical development Support proposal development and business development efforts for highway/infrastructure pursuits Attend project meetings, site visits, and coordinate with DOT and municipal reviewers as needed Project Types Include: Highway and roadway rehabilitation Intersection improvements and traffic flow enhancements Site planning and civil infrastructure for public sector developments Streetscape and ADA compliance upgrades Utility coordination and relocation Stormwater and drainage systems Occasional bridge approach work or coordination with structural teams Qualifications Bachelor’s degree in Civil Engineering (Master’s preferred) 7+ years of experience in civil engineering focused on highway, infrastructure, and transportation projects EIT or PE license preferred (New York or New Jersey preferred or ability to obtain) Extensive knowledge of NJDOT, NYSDOT, or similar DOT agency standards and processes Proficient with civil design software including MicroStation, InRoads, AutoCAD Civil 3D Familiarity with stormwater, permitting, and utility relocation Strong leadership, coordination, and communication skills Experience mentoring and managing junior staff is a plus Compensation & Benefits Competitive salary based on experience Medical, dental, and vision insurance 401(k) with company match Paid holidays, vacation, and sick time Hybrid work schedule Career advancement and continuing education opportunities