Trabajos veteran engineering and technology en Commack, New YorkCrear alertas

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio. IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: The Senior Maintenance Manager is a senior field-execution leader responsible for overseeing multiple fleet maintenance locations within an assigned area. This role serves as the primary execution arm of the company’s Fleet Maintenance Department, ensuring that enterprise maintenance standards, KPIs, and financial controls are consistently deployed and sustained at the shop level. This position does not set enterprise maintenance strategy but is fully accountable for executing it—driving consistency, developing maintenance leaders, stabilizing underperforming locations, and ensuring fleet availability, safety compliance, and cost discipline across a complex, high-utilization refuse and heavy-duty fleet. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Multi-Site Fleet Leadership, • Provide direct oversight and leadership to Maintenance Managers and Supervisors across multiple locations, • Ensure consistent execution of IWS maintenance standards, policies, and procedures, • Serve as the escalation point for complex operational, technical, and personnel issues, • Coach, mentor, and develop maintenance leadership talent to support succession planning, • Maintenance Execution & Reliability, • Ensure disciplined execution of preventive, predictive, and corrective maintenance programs, • Drive high asset availability and uptime across refuse trucks, tractors, trailers, roll-off, and support equipment, • Lead structured root cause analysis (RCA) for repeat failures, downtime assets, and cost outliers, • Enforce standardized repair practices, PM intervals, and inspection protocols, • KPI Ownership & Performance Management, • Own area-level maintenance KPIs, including but not limited to:, • -PM Efficiency, Labor Efficiency, Fleet Availability & Downtime, R&M Spend vs Budget, Backlog Aging & Work Order Management, DVIR Closure & Regulatory Compliance, • Conduct weekly and monthly performance reviews with Maintenance Managers, • Develop and execute corrective action plans for underperforming locations, • Ensure readiness and accuracy for Monthly Operating Reviews (MORs) and executive reporting, • Financial Stewardship, • Manage and control area-level maintenance spend within approved budgets, • Forecast labor, parts, and outside service costs with accuracy and discipline, • Identify cost-reduction opportunities without compromising safety or reliability, • Partner with Directors on capital recommendations based on asset condition and performance data, • CMMS & Process Discipline, • Enforce strict CMMS compliance across all assigned locations, • Ensure accuracy and completeness of:, • Work order notes, Labor hours, Parts usage & Equipment Status, • Audit work order quality and backlog health regularly, • Drive standard workflows and data discipline to support enterprise analytics, • Safety & Compliance, • Champion a safety-first culture across all maintenance locations, • Ensure compliance with OSHA, DOT, environmental regulations, and company policies, • Lead safety audits, inspections, and corrective actions, • Ensure adherence to LOTO, HECP, hot-work, and shop safety standards, • Maintain audit-ready documentation and regulatory records, • Vendor & Contractor Oversight, • Oversee execution of vendor, contractor, and OEM relationships at the area level, • Ensure vendor performance aligns with cost, quality, and turnaround expectations, • Support contract compliance and service-level adherence, • Partner with Procurement and Directors on supplier performance feedback Shedule: 6am to 5pm Monday through Friday alternating Saturday. Requirements and Qualifications:: • Minimum 7+ years of progressive fleet maintenance experience, including multi-site oversight, • Bachelor’s degree in Engineering, Industrial Technology, or related field (or equivalent experience), • Prior experience managing large, heavy-duty vehicle fleets (refuse, vocational, or similar), • Proven 5 years of leadership experience managing Maintenance Managers and/or Supervisors, • The Senior Maintenance Manager is expected to, • Operate with high ownership and accountability, • Lead with consistency, discipline, and professionalism, • Develop leaders—not just fix problems, • Serve as a stabilizing force during growth, acquisitions, and operational change, • Act as a trusted execution partner to Directors and Corporate Fleet Maintenance leadership, • Strong working knowledge of:, • Preventive maintenance programs, • Reliability and downtime reduction, • OSHA safety standards (LOTO, HECP, shop safety), • CMMS-driven maintenance operations, • Demonstrated ability to manage budgets, analyze performance data, and drive execution, • Advanced root cause problem-solving and analytical skills, • Strong communication, coaching, and leadership presence, • Experience in refuse, waste, recycling, or heavy vocational fleet environments, • Lean, Six Sigma, or reliability-focused certifications Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $140,000.00/Yr. Salary Range Maximum: USD $175,000.00/Yr.

Job DescriptionVP, Technical Operations & Support – based in Melville, NY Position Summary The Vice President of Technical Operations & Technical Support is a seasoned leader responsible for the seamless, secure, and reliable support of our mission-critical software applications and employee systems. This leader will drive the strategy and execution of all technical operations (infrastructure and application support, incident management, company and employee systems support) and technical support functions (Customer Support, L2/L3 support teams). The core objective is to ensure optimal system performance and superior customer and employee satisfaction and retention, leveraging data-driven insights and a culture of continuous improvement. Key Responsibilities • Strategic Leadership: Develop and execute a comprehensive technology operations and support strategy that aligns with overall business goals and objectives., • Operational Excellence & Reliability: Oversee the design, planning, implementation, and maintenance of support systems and tools to automate and make effective our tech ops and support processes using tools such as Jira Service Management., • Customer Support & Experience: Define and implement world-class incident management and customer support strategies and service level agreements (SLAs), ensuring high customer satisfaction and retention for our mission-critical applications., • Team Management & Development: Build, mentor, and lead high-performing, globally located level one, level two and incident management support teams, fostering a culture of accountability, responsiveness and technical growth., • Process Improvement: Drive continuous improvement of our products and processes via thorough RCA analyses, implementing best practices and frameworks such as ITIL for IT Service Management (ITSM)., • Operational Excellence: Enforce Service Level Objectives (SLOs) and key Performance Indicators (KPIs) for API’s applications, leading incident management, post-mortems, and proactive measures to ensure 24/7 reliability, effectiveness, and performance, • Cost Optimization: Develop and manage the infrastructure budget, implementing FinOps practices and optimizing AWS resource usage for cost-efficiency., • Demonstrated success in managing high-volume, 24x7 production environments and leading significant cloud migration or modernization initiatives., • Cross Team Collaboration: Partner with application engineering, product, and business leaders to ensure product stability and employee systems meet and exceed business and client needs.Qualifications & Experience, • Education: A Bachelor's degree in Computer Science, Engineering, Information Technology, or a related field is required; a Master's degree (related field or MBA) is highly preferred.Experience:, • Typically 15+ years of progressive experience in IT operations, employee systems administration, and/or technical support, with at least 5 years in a senior leadership/executive role., • Deep experience with employee enablement tools including Microsoft suite of employee enablement products such as 365, Entra, Teams and others., • Proven track record of managing globally distributed technical teams within a SaaS or enterprise software environment., • Extensive experience with cloud computing and infrastructure management.Skills:, • Exceptional leadership, problem-solving, and decision-making abilities., • Strong strategic thinking and project management skills., • Excellent communication skills, with the ability to convey complex technical information to non-technical stakeholders and executive leadership., • Deep understanding of enterprise architecture, system design, and software development lifecycle principles., • Hands-on expertise in AWS services and architecture (e.g., EC2, S3, VPC, RDS, Lambda, IAM, CloudWatch, Route 53)., • Leading infrastructure engineering for mission critical applications requiring high stability, reliability and performance., • Familiarity with ITSM platforms and data analytics tools for performance monitoringTravel: 10% Compensation: The good faith compensation for this position is $180,000 - 200,000 USD, commensurate with experience. Who We Are API is the global leader for crew accommodation solutions, and we are changing the way businesses manage travel. Our technology platform streamlines the entire crew planning process, making day-to-day operations more efficient and elevating the crew layover experience. API’s proprietary technology, mobile solutions and our experienced team are positioned to offer our clients a complete, end-to-end platform that integrates seamlessly into their process. We are looking for dynamic, creative, and tech savvy individuals to join our team. If you are passionate about hard work, providing impeccable service, technology, and solutions to our clients then API may be a great fit for you! Other Duties Duties, responsibilities and activities may change at any time according to business needs. The performance of additional responsibilities if you are designated as a Data Protection Champion (DPC), Senior Information Risk Owner (SIRO) or Information Assurance Accounting Officer (IAAO). Work Environment This position operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand, walk; use hands to finger, handle or feel; and reach with hands and arms. AAP/EEO Statement Accommodations Plus International is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, creed, color, religion, alienage or national origin, ancestry, citizenship status, age, disability or handicap, sex, marital status, veteran status, sexual orientation, genetic information, arrest record, or any other characteristic protected by applicable federal, state or local laws. Our management team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities and general treatment during employment. Powered by JazzHR AVM3svXT1q

Job Description Join North Wind Systems – Accelerating Hypersonic Innovation At North Wind, we are advancing hypersonic technologies through cutting-edge research, system development, and flight testing. Our team drives innovation in high-speed aerodynamics, propulsion systems, and mission-critical components, supporting every phase of hypersonic programs—from R&D to flight testing. If you are passionate about pushing technological boundaries in a dynamic environment, we invite you to join us. The Lead Engineering Analyst will conduct analysis on designs of R&D prototype components and assemblies. Responsibilities: • Performs thermal and structural analysis of product components and assemblies using finite element or hand calculation methods., • Lead a small team of analysts, providing mentorship, reviewing output of team members, and driving analysis tasks to closure. Manages analysis related budgets and schedules and tracks team performance accordingly., • Reviews customer specifications and internal methods to plan analysis activities, determine loading conditions and develop appropriate acceptance criteria., • Supports customer interface meetings and design reviews by presenting analysis plans, status and results as required., • Bachelor’s degree in engineering discipline with 10+ years of related experience, or a combination of education and experience equivalent to above., • Candidate should have excellent communication skills and enjoy working in a fast-paced work environment., • Must be a self-starter, able to work on multiple projects, and prioritize workload., • General familiarity with aerospace research and development test products such as wind tunnel models, test engines and prototype devices; and analysis of these in the subsonic, transonic and hypersonic realms., • Working knowledge of computer-aided modeling codes (NX or SOLIDWORKS preferred), • Expert knowledge of Finite Element Analysis techniques and codes (ANSYS preferred), • Expert knowledge of steady state, transient, modal, buckliing, harmonic response, and random vibration analysis. Also familiar with the modeling of nonlinearities such as contact, material plasticity, large deflections, etc., • Expert ability for performing textbook hand calculations for axial/bending/torsional stress, beam deflection, and free body diagrams, and 1D fluid flow., • Familiarity with Computation Fluid Dynamics work such that you can supervise CFD team members while not necessarily performing the work., • Familiarity with ASME Section VIII pressure vessel design and calculations., • Working knowledge of Mechanics of Materials for the purposes of obtaining material strength and fatigue limits for a wide range of materials including metals, composites, castings, weldments and 3D printed parts., • Working knowledge of stress-based and strain-based fatigue. North Wind is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. North Wind supports safe and drug free workplace through pre-employment background checks and drug testing. The salary range provided is a general guideline. Actual pay will depend on several factors, including, but not limited to, education, experience, training, and other applicable qualifications. North Wind is committed to pay transparency in compliance with applicable state and local laws. All candidates must be eligible to work in the United States.

Job Description Job Summary The Design Engineer 3 is a senior level engineer who provides engineering support on systems, system elements, interfacing systems, components, devices and/or processes. Possesses broad knowledge of industry practices, standards, and technology areas. Works as either technical or programmatic lead of a team and assists with solving complex problems in an engineering discipline. Develops strategic and implementation plans. Essential Functions • Works on multiple highly complex major projects requiring innovative, original solutions, • May plan multiple projects simultaneously. Estimates, tracks & completes project on time and within budget., • Subject Matter Expert in at least one area or system., • Strong technical, proposal and report writing skills with ability to collect or generate all necessary backup material., • Exercises considerable latitude and technical judgment in deciding work methods., • Can lead a group of engineers and technicians, responsible for budget and manpower estimates., • Develops innovative solutions to unique problems., • Works mostly independently with minimal supervision., • Exercises substantial initiative/ judgment in work methods and in interpreting goals., • Able to give effective presentations to critical/high level customers., • Knowledgeable in all technical areas of the group's scope or having a demonstrated ability to achieve that level of proficiency in a short period of time., • Responsible for large and fairly complex projects., • Ability to work well with and mentor both high and low performers in a team or group environment, setting expectations, and providing input and feedback in a helpful way that fosters accountability. Ability to deal with personnel problems in a constructive manner., • Proven leadership skills. Identifies problems and actively devises appropriate solutions., • U.S. Citizenship Required., • BSME or equivalent educational degree required., • Minimum six (6) years or demonstrated capability in an Engineering role, experience within a manufacturing environment and aerospace industry preferred., • Strong knowledge of AS9100 and ISO requirements., • Ability to read, write, and speak in English proficiently., • Strong work ethic; can work independently or in a group., • Highly professional with excellent telephone etiquette., • Medical Dental, Vision,, • Life Insurance, Long-Term Disability, • Aflac Voluntary benefits (Critical Illness, Accident, Hospital, STD), • PTO (3 weeks accrued first year!), • 10 Paid Holidays, • Flexible Spending Accounts, • 401(k) with matching, • Pet Insurance Reports To: Engineering Manager FLSA Classification: Exempt Job Type: Full time EOE/Disability/Veteran EAST/WEST INDUSTRIES INC. is a woman-owned small business located in Ronkonkoma, NY. We are a world leader in the development and production of aircraft seats and life support systems for high-performance military aircraft, and ground support equipment for servicing such aircraft. Job Posted by ApplicantPro

Job Description Company Overview ISP Millwork is a rapidly growing commercial and residential millwork company located in Ronkonkoma, NY. We specialize in high-end commercial interiors, luxury residential projects, hospitality environments, custom casework, panel systems, wall cladding, reception desks, fixture packages, and specialty fabrication. Job Summary ISP Millwork is seeking a motivated and detail-oriented AutoCAD Drafter to join our team. Specializing in commercial and residential millwork, this role offers and excellent opportunity for professional growth, with the potential to advance within the organization. The ideal candidate will assist in creating and modifying shop drawings on high-end millwork projects, ensuring precision and adherence to specific job specifications. Responsibilities • Interpret architectural drawings and convert into precise work-ready millwork shop drawings., • Create detailed technical drawings using AutoCAD software, including plans, elevations, and sections specific to commercial and residential millwork., • Maintain drawing sets throughout project phases (submittal, approval, and fabrication)., • Update and revise existing drawings as needed to reflect client driven changes, client supplied coordination documents and field surveys., • Prepare and maintain accurate documentation of all drawing modifications., • Communicate with Drafting/Engineering management, project managers, and shop personnel regarding design challenges or clarifications., • Ensure all drawings follow ADA, architectural standards, and internal company drafting templates., • Assist in planning and executing drafting projects to ensure timely completion. Qualifications • Degree in Drafting, Engineering Technology, or related field, • Experience in commercial millwork, architectural woodworking, or casework manufacturing., • Familiarity with shop fabrication processes and hardware applications., • Understanding of building codes, ADA compliance, and industry standards., • Proficiency with AutoCAD software., • Strong knowledge of construction methods, millwork manufacturing, or cabinetry fabrication., • Ability to read and interpret blueprints, architectural specs, and technical drawings., • Detail-oriented with strong accuracy in measurements and documentation., • Ability to multitask and manage deadlines across multiple projects., • Highly motivated with a strong desire for career growth and development., • Team player with the ability to work effectively in a collaborative environment. Salary Information To the extent this position is performed in Ronkonkoma, New York, the anticipated annual salary range for this role is $100,000 to $125,000. All qualified applicants will receive consideration for employment at ISP without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or other characteristics protected by law. Candidates must be authorized to work in the United States without the need for employer sponsorship. The salary range listed in job postings reflects the Company’s good-faith estimate at the time of posting. Actual compensation may vary based on factors such as position tier, geographic location, work experience, market conditions, education/training, and skills. Company DescriptionISP Millwork is a rapidly growing commercial and residential millwork company located in Ronkonkoma, NY. We specialize in high-end commercial interiors, luxury residential projects, hospitality environments, custom casework, panel systems, wall cladding, reception desks, fixture packages, and specialty fabrication.ISP Millwork is a rapidly growing commercial and residential millwork company located in Ronkonkoma, NY. We specialize in high-end commercial interiors, luxury residential projects, hospitality environments, custom casework, panel systems, wall cladding, reception desks, fixture packages, and specialty fabrication.

Job Description Join a Leading Surveying Firm with a Legacy of Excellence Control Point Associates is not your average surveying firm — we are a dynamic team committed to delivering exceptional surveying services. With over 30 years of experience in land surveying, we specialize in services like construction stakeouts, boundary surveys, and 3D laser scanning, serving industries such as construction, engineering, and land development. Our team is expanding, and we’re looking for an experienced Instrument Operator to join us in Melville, NY, with occasional work in NYC. If you're a skilled Instrument Operator who thrives in a fast-paced, team-oriented environment, we want to hear from you! Why Control Point Associates? At Control Point Associates, we’re a team that focuses on doing great work and helping our employees grow. Here’s why joining us could be the perfect career opportunity for you: • 30+ Years of Expertise: We’ve earned a reputation for exceptional quality, precision, and dependability over three decades of service., • Cutting-Edge Technology: We utilize advanced tools like Trimble, Leica, and 3D laser scanners to ensure the highest standard of work., • Opportunities for Advancement: We invest in your career growth through ongoing training and certification programs., • Collaborative Team Culture: Our work environment promotes teamwork, where everyone contributes to achieving collective success., • Comprehensive Benefits: Enjoy medical, dental, and vision coverage, 401(k) matching, paid time off, and holiday breaks., • Diverse Work Experience: No two days are alike, with a mix of both field and office-based projects to keep your work dynamic and engaging., • Company Perks: Benefit from team lunches, weekly breakfast, holiday celebrations, and a fun, collaborative culture., • Supportive Work Environment: Your contributions are valued, and we prioritize your career development and growth. Essential Functions:, • Carefully and diligently perform all phases of field surveying including Construction Stakeout, Topographical Surveys, Preliminary Boundary Analysis/Stake Out, and As-Built surveys while utilizing tools like Trimble/Leica/Spectre robotic total stations, data collectors, auto-levels, GPS RTK Units, wireless communications, 3D Laser Scanners, etc., • Conduct field calculations and sketches; downloading and checking data while being held accountable to accuracy of all survey documents., • Maintain and take care of all company equipment and vehicles and ensuring setup is in a secure environment with proper safety precautions in place., • Positively represent the brand while communicating professionally and regularly with customers on-site., • Other duties as assigned. Knowledge, Skills, and Abilities:, • Entry level (1-3 years of experience) performing boundary, topographic, ALTA surveys, construction stakeout, etc., • Experience using robotic total stations (Trimble, Spectre, Leica), data collector, auto levels, GPS RTK Unit, and familiarity with AutoCAD a plus., • High School Diploma and strong math and computer skills., • The ability and desire to expand your skillsets and adapt to new technologies., • Ability to complete additional certificates, (OSHA (10, 30, 40, etc.), Hazwoper, TWIC, etc.), • Must possess a valid driver’s license., • Ability to work overtime as needed and travel with overnight stays if required. Physical Requirements: Compensation and Benefits: • Pay Range: $19-$25+ per hour depending on experience, • Additional Benefits: Health, dental, and vision insurance, life insurance, 401(k) match, paid time off, and more. Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. Equal Opportunity Employer: Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group. Powered by JazzHR 7uriLtg9LR

Job Location(s) US-NY-Central Islip Job ID 2026-4428 Division College of Osteopathic Medicine Position Type Staff Type Regular Full-Time Category Administrative/Clerical New York Institute of Technology's six schools and colleges offer undergraduate, graduate, and professional degree programs in in-demand disciplines including computer science, data science, and cybersecurity; biology, health professions, and medicine; architecture and design; engineering; IT and digital technologies; management; and energy and sustainability. A nonprofit, independent, private, and nonsectarian institute of higher education founded in 1955, it welcomes nearly 8,000 students worldwide. The university has campuses in New York City and Long Island, New York; Jonesboro, Arkansas; and Vancouver, British Columbia, as well as programs around the world. More than 112,000 alumni are part of an engaged network of physicians, architects, scientists, engineers, business leaders, digital artists, and healthcare professionals. Together, the university's community of doers, makers, healers, and innovators empowers graduates to change the world, solve 21st-century challenges, and reinvent the future. For more information, visit nyit.edu. New York Tech's- College of Osteopathic Medicine seeks a full-time Medical Assistant for our Family Health Care Center at our Central Islip location.The Medical Assistant will work in a multi-specialty physician's office; responsibilities include: Verify patient information by interviewing patients, recording medical history, confirming purpose of visit. Prepare patients for examinations by administering preliminary physical tests, taking vital signs and reporting patient history summary. • Performs phlebotomy procedures, toxicology exams and EKG's. Review and processes lab requisitions and results within the electronic medical record. Ensure reports and all test results have been received prior to patient's arrival. (i.e.: .outside labs, diagnostic tests; consult reports, etc.). Ensures abnormal test results, including critical and high priority, are assigned to ordering/covering provider as per policies., • Keeps equipment operating by following operating instructions; troubleshooting breakdowns, maintaining supplies, performing preventive maintenance., • Secures patient information and maintains patient confidentiality by completing and safeguarding medical records. Maintains safe, secure and healthy work environment by following standards and procedures; complying with OSHA regulations. Adhere to AHC HIPAA Compliance Program, • Keeps supplies ready by maintaining inventory of stock, placing orders and verifying receipt., • Works collaboratively with practice physicians to ensure efficient medical record documentation through use of EMR., • Greet and receive patients. Obtain appropriate patient financial information. Collect payments and print receipt for patients, reconcile cash drawer and at the end of the day print days sheet., • Appointment scheduling. Document patient arrival, verify patient information and obtain appropriate consents and signatures. Obtain insurance referral as needed. Check patient Insurance eligibility as needed., • Answer telephone, take incoming messages and appropriately document in the electronic medical record., • Scan correspondence, reports, etc., in patient's medical record and assign to appropriate Provider for review., • Print medical records upon request upon receipt of an appropriately completed release of record form Skill in venipuncture procedure, vital signs, operation of EKG's, medical equipment. Knowledge of electronic medical records. Ability to prepare patients for medical examinations and procedures. New York Institute of Technology offers numerous opportunities to enhance personal and professional growth and provides employees with a competitive compensation and benefits program inclusive of generous paid time off, holidays, tuition remission, and retirement plans with employer contributions. New York Institute of Technology is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. In compliance with local legislation as well as to provide greater transparency to candidates, the annual base salary range for this position is listed. New York Tech considers factors such as (but not limited to) scope and responsibilities of the position, candidate experience/expertise, education/training, key skills, geographic location, internal peer equity as well as market, organizational considerations and/or applicable collective bargaining agreement when extending an offer. USD $35,000.00/Yr. USD $40,000.00/Yr.

Job Description About CAMP Systems: At CAMP Systems, we are the trusted leader in aircraft compliance and health management, proudly serving the global business aviation industry. With over 20,000 aircraft and 33,000 engines supported on our cutting-edge platforms, and partnerships with more than 1,300 maintenance facilities and parts suppliers worldwide, we’re shaping the future of aviation technology. Since our founding in 1968, we’ve grown to a dynamic team of 1,600+ employees across 14 locations globally—all united by a passion for innovation and excellence. Our Mission & Vision: We connect the aviation industry through smart technology to make flight safer and more efficient, driving the future of aviation with intelligence and exceptional customer experiences. Our Values & Excellence Mindset: We are customer obsessed, trust-driven, owners of our work, stronger together, constantly curious, and boldly innovative. What You Will Experience in This Role: We are seeking a full stack Software Engineer with strong expertise in .NET and Angular to join our talented engineering team. Working part of an Agile Scrum team, you will play a key role in designing, building, scaling, and maintaining enterprise-grade web applications that serve a diverse range of customers. This is a hands-on position, we want someone who is focused, and passionate about coding, and development. You will work closely with product managers, designers, and other developers to create seamless, performant, and highly scalable solutions. We expect all our team members to contribute towards building a culture of continuous learning and improvement. We are open to new approaches and ideas. CAMP offers a unique domain, as well as a chance to be part of a product that affects the readiness, safety, and performance of business aircraft from nearly every major manufacturer. Like many of our team, if you are selected, with hard work, a continued quest for knowledge, and a knack for troubleshooting, there are endless possibilities for growth and development. Responsibilities: • Design & Development: Architect and implement robust, scalable, and high-performance web applications using .NET (Core, ASP.Net, Web API) and Angular and ExtJS., • Code Quality: Write clean, maintainable, and well-documented code following the industry’s best practices. Perform code reviews and mentor junior developers to ensure coding standards are met., • End-to-End Ownership: Manage the full software development lifecycle, from gathering requirements to deployment and ongoing maintenance., • Collaboration: Work collaboratively with cross-functional teams including product managers, designers, QA engineers, and other developers to deliver high-quality features on time., • Performance Optimization: Focus on optimizing the performance of both front-end and back-end components, ensuring the application scales effectively and provides an excellent user experience., • Testing & Quality Assurance: Implement unit tests, integration tests, and other automated tests to ensure the reliability and stability of the application., • Troubleshooting & Debugging: Investigate production issues, resolve defects, and implement preventative measures for future releases., • Backend: Expertise in .NET Core (C#), ASP.NET MVC, Web API, NHibernate, and Oracle (or equivalent relational database systems)., • Frontend: Strong proficiency with Angular, HTML5, CSS3, and TypeScript., • APIs: Experience designing and implementing RESTful APIs and working with OAuth and JWT authentication., • Cloud: Experience with AWS cloud platform., • ML/AI: Experience with LLM integration, NLP, training and utilization of ML models., • Version Control: Proficient in Git for version control., • Unit Testing & TDD: Experience with automated testing frameworks such as xUnit, NUnit, Jasmine., • Enterprise Architecture: Highly proficient with 5+ years of experience building scalable enterprise-grade systems with a focus on performance, maintainability, and extensibility. Solid understanding of object-oriented design and software engineering principles., • Web Application: Solid experience in data driven web applications using Angular, other JavaScript frameworks., • Agile Methodology: Proven experience working in Agile or Scrum development environments., • Containerization: Experience with Docker, Kubernetes, or other containerization technologies., • DevOps: Knowledge of DevOps practices and tools (CI/CD pipelines, infrastructure as code)., • Education: Bachelor’s degree in computer science, Information Technology, or a related field., • Strong problem-solving skills and the ability to think critically and creatively., • Excellent communication skills, both written and verbal, with the ability to collaborate effectively with technical and non-technical team members., • Self-driven with a focus on delivering high-quality results on time., • Ability to handle multiple priorities and navigate complex technical challenges. Compensation range for this opportunity is currently $110k - $120k DOE Why Work at CAMP? Join a culture where your ideas matter, your impact is real, and your growth is supported. Be part of a team reimagining the future of aviation. CAMP is committed to creating a diverse environment and is proud to be an affirmative action and equal opportunity employer – vets/disabled CAMP is committed to providing access, equal opportunity, and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, please contact . All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, sexual orientation, gender identity, disability or protected veteran status EEO.

Job Description About CAMP Systems: At CAMP Systems, we are the trusted leader in aircraft compliance and health management, proudly serving the global business aviation industry. With over 20,000 aircraft and 33,000 engines supported on our cutting-edge platforms, and partnerships with more than 1,300 maintenance facilities and parts suppliers worldwide, we’re shaping the future of aviation technology. Since our founding in 1968, we’ve grown to a dynamic team of 1,600+ employees across 14 locations globally—all united by a passion for innovation and excellence. Our Mission & Vision: We connect the aviation industry through smart technology to make flight safer and more efficient, driving the future of aviation with intelligence and exceptional customer experiences. Our Values & Excellence Mindset: We are customer obsessed, trust-driven, owners of our work, stronger together, constantly curious, and boldly innovative. What You Will Experience in This Role: We are seeking a full stack Associate Software Engineer with expertise in .NET and Angular to join our talented engineering team. Working part of an Agile Scrum team, you will play a key role in building, scaling, and maintaining enterprise-grade web applications that serve a diverse range of customers. You will work closely with product managers, designers, and other developers to create seamless, performant, and highly scalable solutions. We expect all our team members to contribute towards building a culture of continuous learning and improvement. We are open to new approaches and ideas. CAMP offers a unique domain, as well as a chance to be part of a product that affects the readiness, safety, and performance of business aircraft from nearly every major manufacturer. Like many of our team, if you are selected, with hard work, a continued quest for knowledge, and a knack for troubleshooting, there are endless possibilities for growth and development. Responsibilities: • Implement, enhance and maintain robust, scalable, and high-performance web applications using .NET (Core, ASP.Net, Web API) and Angular & ExtJS., • Build and integrate front-end and back-end components, ensuring performance, responsiveness, and security., • Utilize state-of-the-art AI coding tools, LLMs, and frameworks to accelerate software development, automate testing, and improve code quality., • Collaborate with cross-functional teams including product managers, designers, QA, and DevOps., • Participate in code reviews and contribute to maintaining high standards of code quality and best practices., • Assist in troubleshooting and debugging issues in production and lower environments., • Write unit and integration tests to ensure code quality and reliability., • Experience in .NET (C#), ASP.NET MVC, Web API, NHibernate, and Oracle (or equivalent relational database systems)., • Proficiency with Angular, JavaScript, HTML5, CSS3, and TypeScript., • Experience in implementing and integrating with REST APIs., • Experience in building and maintaining enterprise-grade data-driven web applications using .NET, Angular, other JavaScript frameworks., • Understanding of object-oriented design and software engineering principles., • Experience working in Agile or Scrum development environments., • Education: Bachelor’s degree in computer science, Information Technology, or a related field., • Strong problem-solving skills and the ability to think critically and creatively., • Excellent communication skills, both written and verbal, with the ability to collaborate effectively with technical and non-technical team members. Salary Range: $80,000 - $90,000 DOE (Depending on experience) Why Work at CAMP? Join a culture where your ideas matter, your impact is real, and your growth is supported. Be part of a team reimagining the future of aviation. CAMP is committed to creating a diverse environment and is proud to be an affirmative action and equal opportunity employer – vets/disabled CAMP is committed to providing access, equal opportunity, and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, please contact . All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, sexual orientation, gender identity, disability or protected veteran status EEO.

Job Description Join a Leading Surveying Firm with a Legacy of Excellence Control Point Associates is not your average surveying firm — we are a dynamic team committed to delivering exceptional surveying services. With over 30 years of experience in land surveying, we specialize in services like construction stakeouts, boundary surveys, and 3D laser scanning, serving industries such as construction, engineering, and land development. Our team is expanding, and we’re looking for an experienced Project Manager to join us in Long Island, NY. If you're a skilled Project Manager who thrives in a fast-paced, team-oriented environment, we want to hear from you! Up to a $10,000 signing bonus will be provided! Why Control Point Associates? At Control Point Associates, we’re a team that focuses on doing great work and helping our employees grow. Here’s why joining us could be the perfect career opportunity for you: • 30+ Years of Expertise: We’ve earned a reputation for exceptional quality, precision, and dependability over three decades of service., • Cutting-Edge Technology: We utilize advanced tools like Trimble, Leica, and 3D laser scanners to ensure the highest standard of work., • Opportunities for Advancement: We invest in your career growth through ongoing training and certification programs., • Collaborative Team Culture: Our work environment promotes teamwork, where everyone contributes to achieving collective success., • Comprehensive Benefits: Enjoy medical, dental, and vision coverage, 401(k) matching, paid time off, and holiday breaks., • Diverse Work Experience: No two days are alike, with a mix of both field and office-based projects to keep your work dynamic and engaging., • Company Perks: Benefit from team lunches, weekly breakfast, holiday celebrations, and a fun, collaborative culture., • Supportive Work Environment: Your contributions are valued, and we prioritize your career development and growth. Essential Functions:, • Quality control of all survey documents, including survey plans, record plots, metes and bounds descriptions, review of title commitment reports and construction layout services., • Provide weekly progress and status reports on project deliverables to all project stakeholders and management team., • Responsible for administering surveying activities which includes oversight of staff, technical resources, and client communication for multiple projects., • Prepare and execute quality control reviews, safety and quality assurance procedures., • Effectively convey our Integrated Business Model in both written and verbal business development discussions and create/maintain our strong presence and leadership in the market and beyond., • Initiate and participate in business development activities to partner with new and existing clients., • Continually seeks opportunities to increase client satisfaction and deepen client relationships., • Monitor project budgets and accountability for project profitability; prepare and review project billing reports for monthly invoicing; work with accounting department on account collections., • Staff development, contract preparation, know your numbers and be accountable for them., • Champion our brand, our values and our culture with your positive attitude, dress and demeanor, • Exemplify the highest level of commitment, positively work the hours needed., • Other duties as assigned. Knowledge, Skills, and Abilities:, • Minimum of 8 years of survey experience., • New York Licensed Land Surveyor., • Proven track record of business development and leadership., • Bachelor's Degree preferred., • Proficient in AutoCAD Civil 3D., • Ability to relate to clients and people at all levels of the organization., • Must possess excellent communication, diplomacy and listening skills; specifically, be accessible and responsive to the needs of clients., • Ability to read, analyze, and interpret drawings and the most complex documents., • Ability to operate a computer, using technical software and other applications., • spreadsheets, and other business software., • Driven to succeed. Physical Requirements:, • Prolonged periods sitting at a desk and working on a computer. Compensation and Benefits: • Pay Range: $100,000-$150,000+ annually depending on experience, licensure, and geographic location., • Additional Benefits: Health, dental, and vision insurance, life insurance, 401(k) match, paid time off, and more. Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. Equal Opportunity Employer: Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group. Powered by JazzHR cZiuHFBG66

Couriers using the Uber platform come from all backgrounds and industries ranging from traditional driving and transportation industries to other industries. Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly. You decide how much or little you

Couriers using the Uber platform come from all backgrounds and industries ranging from traditional driving and transportation industries to other industries. Click “Apply Now” and complete the sign up page. Download the app and get started.

Couriers using the Uber platform come from all backgrounds and industries ranging from traditional driving and transportation industries to other industries. Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly. You decide how much or little you

Couriers using the Uber platform come from all backgrounds and industries ranging from traditional driving and transportation industries to other industries. Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly. You decide how much or little you

Couriers using the Uber platform come from all backgrounds and industries ranging from traditional driving and transportation industries to other industries. Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly. You decide how much or little you

Couriers using the Uber platform come from all backgrounds and industries ranging from traditional driving and transportation industries to other industries. Download the app and get started. Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.

Couriers using the Uber platform come from all backgrounds and industries ranging from traditional driving and transportation industries to other industries. You decide how much or little you want to drive and earn. You have an iPhone or Android smartphone.

Couriers using the Uber platform come from all backgrounds and industries ranging from traditional driving and transportation industries to other industries. Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly. You decide how much or little you

Couriers using the Uber platform come from all backgrounds and industries ranging from traditional driving and transportation industries to other industries. Click “Apply Now” and complete the sign up page. Download the app and get started.

Couriers using the Uber platform come from all backgrounds and industries ranging from traditional driving and transportation industries to other industries. You have an iPhone or Android smartphone. If you have previous employment experience in transportation (such as a delivery driver, driver, pro

Couriers using the Uber platform come from all backgrounds and industries ranging from traditional driving and transportation industries to other industries. If you have previous employment experience in transportation (such as a delivery driver, driver, professional driver, driving job, truck drive

Couriers using the Uber platform come from all backgrounds and industries ranging from traditional driving and transportation industries to other industries. Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly. You decide how much or little you

Couriers using the Uber platform come from all backgrounds and industries ranging from traditional driving and transportation industries to other industries. Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly. You decide how much or little you

Couriers using the Uber platform come from all backgrounds and industries ranging from traditional driving and transportation industries to other industries. You have an iPhone or Android smartphone. If you have previous employment experience in transportation (such as a delivery driver, driver, pro

Couriers using the Uber platform come from all backgrounds and industries ranging from traditional driving and transportation industries to other industries. You decide how much or little you want to drive and earn. You have an iPhone or Android smartphone.

Couriers using the Uber platform come from all backgrounds and industries ranging from traditional driving and transportation industries to other industries. You have an iPhone or Android smartphone. If you have previous employment experience in transportation (such as a delivery driver, driver, pro