Trabajos Ingenieria en AlbalCrear alertasSin experiencia

Role highlights: Test Engineer Location: Valencia Reports to: Laboratory Lead and Test Architect Employment type: Permanent Workplace model: Onsite Employment is subject to applicable security screening (incl. SUPO, where required) Why this role matters: As our Lab Test Engineer, you’ll plan, run, automate and document the lab’s tests across simulation, signal capture, playback and hardware in the loop, so results are repeatable and trusted. ICEYE is building a space-based RF constellation covering 100 MHz to 30 GHz alongside its SAR fleet, and the Experimentation Lab in Valencia is where we develop, simulate and validate that capability. We simulate the constellation and its emitters end to end, capture real signals from real hardware, and generate and play back signals through a channel simulator for end-to-end runs and algorithm validation. A lab that only its builders can operate becomes shelfware. Specialists will build the simulation, the capture system and the playback chain, and you’ll turn those into tests that run reliably, on schedule, with traceable results. The role covers the full breadth of the lab: setting up hardware, running campaigns, automating procedures, keeping equipment calibrated and inventoried, and producing evidence that engineers and customers can rely on. You’ll have an early seat in a new lab, with direct influence on how ICEYE builds and proves this capability. Who We Are ICEYE is the world leader in sovereign intelligence from space. We deliver persistent monitoring capabilities to detect and respond to changes in any location on Earth. ICEYE owns the world's largest and most advanced SAR (synthetic aperture radar) satellite constellation. To our customers we provide intelligence with unmatched quality, latency and revisit times, in any weather, day or night. To governments who choose to operate their own constellation we provide this proven capability as a sovereign system. ICEYE-built constellations serve customers in defence and intelligence, environmental monitoring, insurance and emergency management. We enable fast decisions that contribute to a safer future. Founded and headquartered in Finland, ICEYE operates globally with over 1000 employees across Europe, North America, the Middle East, and Asia-Pacific. Your day-to-day responsibilities Plan and run tests across all three lab missions: end-to-end simulation runs, emitter capture sessions, playback and channel simulator campaigns, flatsat and receiver tests, and algorithm validation. Write procedures and automate them: turn manual setups into scripted, repeatable test sequences, and add them to regression so each software or firmware build is checked. Set up and maintain the lab: instruments, SDRs, cabling, fixtures, the screened enclosure and emitter bays, network and compute. Track calibration, configuration and inventory so every result records what produced it. Manage test data: keep recordings, run outputs and metadata organised, searchable and backed up, with the provenance to reproduce a result. Analyse and report: compare results to expectations and to previous runs, flag regressions and anomalies, write concise test reports, and log issues with the evidence needed to fix them. Support campaigns in the field and in the air, customer and partner demonstrations, and the reproduction of on-orbit anomalies on the ground. Run the lab safely: RF safety, ESD, equipment handling, access control and the handling rules for controlled material. What we’re looking for Must haves: Hands-on test experience in an electronics, RF, space or comparable hardware lab: test setups, procedures, execution and reporting Comfort with lab instruments (oscilloscopes, spectrum analysers, signal generators, power supplies) and basic RF practice (connectors, attenuators, cable loss) Scripting for test automation and data analysis, typically Python An organised and rigorous way of working: you write things down, version them, and can reproduce last month’s result Clear written English Nice to haves: Satellite AIT, flatsat or hardware-in-the-loop testing SDR experience, RF capture or signal analysis Test automation frameworks, CI pipelines, instrument control (SCPI/VISA) Test data management, databases, dashboards Verification under a formal process (ECSS or similar) Experience setting up a lab from scratch: equipment selection, layout, safety, calibration programme Spanish, for working with local suppliers and facilities Eligibility for national security clearance (an advantage) What success looks like 6 months: lab equipment is inventoried, calibrated and configuration-tracked, and capture and playback sessions run from written procedures, with data stored and findable. 12 months: core tests are automated and running in regression, test reports are produced routinely, and you’ve supported the first field campaign. 24 months: the lab runs as a service. Other teams book and run tests with your procedures, and results arrive with the evidence attached. Application Process Application Screening TA call Hiring Manager call Onsite interview Working at ICEYE At ICEYE, you’ll join a diverse and highly engaged team united by the ambition to make the impossible possible. As a global scale-up, we combine speed and ambition with the opportunity to take real ownership from day one. Your growth, wellbeing, and success are a priority, with continuous professional development, training opportunities, and a culture where collaboration is how we win. How We Work (Our Values) Make the impossible possible: We set ambitious goals and stay calm under pressure. We bring grit, optimism, and ownership when things get hard, and we keep moving until we find a way. Be curious: Go deep, ask questions, listen carefully, and think critically. Understand the “why” behind decisions. See the big picture: Stay close to what’s happening across the company so you can make better decisions. Consider how your work affects others. Drive effective teamwork: Create psychological safety, invite different perspectives, and build inclusive teams. There are no bad questions. Act as one team: We win together. We match tasks to the right owner and stay agile as priorities shift. Have fun: What we do matters—and it should be enjoyable. Celebrate progress, take pride in results, and share the wins. Benefits Our benefits are designed to support your health and wellbeing, at work and beyond. We keep improving them based on employee feedback, and offerings vary by location. Talent Acquisition will confirm what applies for this role and location during the process. Our Commitment to Diversity, Equity, and Inclusion We want ICEYE to be a place where people can be themselves and do great work. Different backgrounds and perspectives make us stronger, which is why we work to create an environment where people feel included, respected, and able to speak up. Whatever your background, we want you to bring your authentic self to the table. We’re committed to fair, inclusive hiring and equal opportunity. Everyone is welcome to apply. If you need any adjustments or support during the recruitment process, tell us—we’ll do our best to help. Apply now to start your ICEYE journey, and help us continue to make the impossible possible together. Read more about ICEYE and working with us at iceye.com. #J-18808-Ljbffr

PowerCo Spain Battery Spain S.A.U. in Sagunto (Valencia) is seeking a logistics automation engineer to design and implement automated intra-logistics solutions, including AGVs, ASRS and conveyors, to boost material handling efficiency.You will collaborate with cross-functional teams, optimize warehouse layouts, ensure safety compliance, document processes, and coordinate with headquarters across Salzgitter and other plants to drive CAPEX/OPEX projects.

Arquitecto de datos para liderar equipo de Big Data en entorno Cloud AWS. Se requiere experiencia en plataformas de datos, patrones cloud, DevOps, Python, Spark, ETL, Sagemaker, Snowflake, DBT, infraestructuras como código y metodologías ágiles. Inglés B2-C1.

Principal Recruitment Consultant | Robotics, Artificial Intelligence, Semiconductor, Telecommunications - AI / SW / HW Engineering/ResearchLea el resumen de esta oportunidad para comprender qué habilidades, incluidas las habilidades interpersonales relevantes y el dominio de paquetes de software, se requieren.We're hiring for an experiencedSenior DevOps Engineerwith experience in Kubernetes for a rapidly expanding and well established software company headquartered in Switzerland.Position:Full-timeSeniority level:Mid-Senior levelJob function:Software DevelopmentLocation: Main remote work in Spain or Poland with travel to Madrid or Berlin twice a month.Payroll: Employed via a payroll provider such as Deel on a local Swiss employment contract.Salary: €70,000-€100,000 depending on experience, with possible flexibility for highly qualified candidates.Qualifications5+ years in DevOps EngineeringExperience with Kubernetes and TerraformKnowledge of Kafka would be nice to haveAWS would also be greatBenefits & ReferralsWe offer a fantastic referral scheme that we would be happy to discuss.Legal & PrivacyBy applying to this role you understand that we may collect your personal data and store and process it on our systems. xhfqzwm For more information please see our Privacy Notice.#J-18808-Ljbffr

Seeking a Senior Technical Operations Engineer to manage and optimize Mautic infrastructure (AWS, SES), ensure system stability, and improve email deliverability. Role involves PHP/Symfony development and contributing to the data platform.

Dover Imaging & Identification (DII) is a segment of Dover Corporation that includes the following brands: Markem-Imaje, Blue Bite, Solaris Laser, Systech, MS Printing Solutions and JK Group. We design, manufacture and deliver industrial equipment, consumables, software and services solutions for the marking & coding, consumer engagement, product traceability, authentication, and digital textile printing markets.Para una comprensión completa de esta oportunidad y de lo que se requerirá para ser un candidato exitoso, siga leyendo. With more than 40 offices and over 3,000 employees worldwide, DII has a presence in +28 countries and offers numerous job opportunities globally. If you're looking for an international, multidisciplinary and collaborative environment that offers a world of opportunities, come join us at DII. Location: Remote, Valencia area The Role As Field Service Engineer you will be a part of our technical service team in Spain (in your assigned area), providing technical support to our local customers. You will have an opportunity to develop your professional career in a highly professional environment with innovative equipment. What You Will Do Perform pre-installations, installations, and maintenance activities for our equipment. Deliver technical training both internally and externally as required. Complete service reports accurately, noting time confirmation, spare part usage, tasks performed, service product, fault/solution codes, installed base data maintenance (serial number, ink, counter value, functional location), reverse flow, billing block code, and billing request confirmation. Promote MI service solutions to maximize customer uptime and sales growth, maintaining a strong focus on customer satisfaction. Collaborate closely with the Sales team to build strong relationships and assist in achieving revenue targets. Travel to customer sites within your assigned area, with occasional national or international travel for training and meetings. What You Need To Have Prior experience as a Field Service Engineer or Technical Service Engineer. Technical qualification or degree in Electrical, Electronics, Networking, or Mechanics. Strong interest in emerging tech and proactive continuous learning. Prior experience with software and a strong understanding of software logic is highly advantageous. Knowledge of Vision Cameras a plus. Ability to technically assess situations and issues, and proactively advise on solutions. Capable of prioritizing and managing multiple responsibilities effectively. Excellent interpersonal and communication skills. Fluency in Spanish and upper-intermediate level of English. What We Offer Health Insurance. xhfqzwm Life Insurance: life, accident and disability. Restaurant Vouchers Flex Salary: training, nursery school, with tax benefits for the employee Public Transport Aid Employee Assistance Program Flexiwork Policy: Up to two days working from home Growth Opportunities within international environment Recruitment Referral bonus You’ll only be the right candidate if you are aligned to our values and culture: Collaborative entrepreneurial spirit Winning through customers High ethical standards, openness and trust Expectations for results Respect and value people All qualified applicants will receive consideration for employment without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law. #J-18808-Ljbffr

En Savills España, consultora inmobiliaria internacional, queremos incorporar un/a Ingeniero/a para formar parte de la División de Arquitectura basado/a en nuestras oficinas de Madrid.Funciones: Desarrollo de Due Diligence técnicas y auditoría de instalaciones sobre edificios existentes oficinas

Overview In this role you will lead the design and implementation of scalable, secure data platforms to enable strategic decisions. You will work closely with cross-functional teams to align architecture with the company’s mission and governance standards. You’ll tackle architecture-driven challenges at scale, shaping data platforms that support enterprise analytics and ML initiatives. This position offers hybrid work, international mobility, and a clear path for career growth within a collaborative, performance‑driven environment. Compensaciones / Beneficios • Hybrid working model, • Relocation package, • Flexible compensation, • Wellbeing program, • Career plan development and training, • Language learning support Responsabilidades, • Lead the architecture and implementation of scalable, secure data platforms, • Drive deployment and integration of enterprise platforms on IBM Watsonx, Azure, and Google Cloud, • Ensure security, scalability, and performance across solutions, • Apply data governance to platform design, • Define and enforce architectural standards and best practices, • Collaborate with cross-functional teams, influence stakeholders, and communicate strategic vision Requisitos principales, • Big Data expert with experience designing and implementing scalable, secure, high-performance architectures, • Cloud platforms, MLOps, or tools such as Hadoop, Spark, and Kafka, • Cross-functional collaboration, • Stakeholder influence, • Effective communication, • IBM Watsonx, • Azure, • Google Cloud

At Voltrac, we are on a mission to strengthen Europe’s food security and defence with an autonomous electric tractor to free farmers from drudgery and keep soldiers out of harm’s way. The 3.5 tonnes platform is currently being tested at vineyards, olive orchards and citrus groves across Spain - check out our website to see it in action. We are about to scale manufacturing to 100 units yearly, and are looking to match the sales accordingly.As part of this scaling efforts, we are looking to strengthen our engineering team. You'll work closely with the founders and contribute to every stage of product development: from understanding end-user needs through to prototyping, manufacturing, and scaling for market adoption. Within 12 months, the aim is to evolve from first customer delivery to regular production. If you're driven by curiosity, thrive in tackling hard engineering problems, and are motivated by building real-world impact with a team of sharp, mission-driven peers – this role could be a great fit.Who we areVoltrac was founded by Francisco Infante Aguirre and Thomas Hubregtsen in 2024. Francisco used to build hydrogen-powered supersonic planes at Destinus and heavy-lifting eVTOLs at Volocopter, but comes from a family that builds and sells tractor implements in over 25 countries. Thomas used to accelerate Machine Learning using GPUs, TPUs, and Quantum Computers at Google X, IBM and BMW, as well as started San Francisco-based Extropic introducing Thermodynamic computers, but also had his first job at a farm.Together, they set their sights on shaking up the market, competing directly with incumbents and startups alike. In their journey, they are supported by investors such as Extantia, Foodlabs, Antler, Push, and Prototype, who together committed a total of 9M in funding. With this, they were able to open up shop in a 1200 m² facility in Valencia, with 300m² of natural‑light office and a 900m² workshop. Valencia is consistently voted as one of Europe’s top places to live based on its low cost of living, excellent climate, and vibrant historic centre. The team is young, comes from different backgrounds, and loves to have team bbqs, but share one aim: shape Europe’s agriculture and defence with machines that do real work.TasksYou’ll take ownership of projects from concept to production – including hands‑on prototyping, detailed design, component selection and rigorous testing. The role spans a broad range of responsibilities and requires close collaboration with teams across R&D, manufacturing, and QA. More specifically, you will:Use CAD, FEA, and engineering calculations to develop robust mechanical designsPerform analysis and testing to validate and optimise system performanceInterface with suppliers and manage procurement for prototyping and productionWork in close collaboration with electronics, mechatronics, and software teams to bring prototypes to lifeLead field testing and iteration of functional prototypesOptimise tools, processes, and designs for productionRequirementsDegree in Mechanical or Aerospace Engineering (or equivalent practical experience)Demonstrated experience in hardware development, with a track record of taking designs from idea to realityStrong problem-solving and analytical skills with a hands‑on, pragmatic mindsetClear communicator with collaborative instincts, especially in multidisciplinary environmentsExperience working with welded parts, mechanical components, system architecture or fabrication will be appreciatedBenefitsWe offer a very competitive base salary, equity participation plan, aid in relocation,, and sales bonuses. Most importantly, we want to offer perks that are important to you. We’d love to hear what you value!#J-18808-Ljbffr

Glory Global busca un/a Field Service Engineer para Valencia, encargado de operar y mantener máquinas en instalaciones de clientes y oficinas.No sabe con seguridad qué habilidades necesitará para esta oportunidad? Simplemente lea la descripción completa a continuación para obtener una idea clar

Ingeniero de Compras con experiencia en consultoría e ingeniería informática, buscando un cambio profesional. Se requiere experiencia en Compras en ingenierías u Oil & Gas, manejo de herramientas eTool, SAP y Excel avanzado. Se valora formación en compras o comercio internacional.

Lead AI Engineer sought to design, implement, and deploy ML solutions, focusing on LLMs and NLP. Will lead a team, manage microservices, and collaborate on cloud platforms. Remote work from Palma.

Westernacher Consulting is seeking an SAP FI/CO Solution Architect to join our Spain-based consulting team. You will shape end-to-end SAP S/4 HANA Finance and Controlling solutions, translating complex transformation goals into scalable, integrated architectures.You will combine deep SAP Finance expertise with advisory and leadership, collaborating across international project teams and guiding decisions for cross-functional integration.#J-18808-Ljbffr

Seeking a Senior Platform Engineer to design and scale internal infrastructure, focusing on architecture, Kubernetes, standardization, and developer experience to enable faster engineering team progress.

Incorporate testability into software architectures with software designers. Lead and mentor the test team and promote software industry best practices. Python and PyTest development for software systems.

Senior AI Engineer sought to build and productionize AI applications on the Databricks platform for clients, focusing on technical delivery, architecture, and customer consulting.

Ingeniero/a de producciónPerfil buscado (Hombre/Mujer) Optimizar y mejorar procesos productivos Realizar auditorías de cumplimiento de procesos Implantar propuestas de mejora Analizar resultados operativos mediante herramientas como Excel y Power BI Dar soporte al equipo de producción en las tareas habituales Velar por la Seguridad Alimentaria (SA), la Prevención de Riesgos Laborales (PRL) y la protección del Medio Ambiente (MA) en todas las actividades, procesos y gestiones en las que participes Asegurar una correcta segregación de residuos Experiencia previa de 3 años como Ingeniero/a de producción Empresa ubicada en Camp del Túria, Valencia Formación: Ingeniería Industrial o similar Experiencia mínima: 3 años en un puesto similar Competencias clave: Capacidad de trabajo en equipo y motivación por aprender y desarrollarse Conocimientos informáticos: manejo del paquete Office Formarás parte de un entorno industrial, dentro del área de procesos industriales, colaborando directamente con el equipo de producción y bajo la supervisión del Responsable de Procesos Industriales en una empresa del sector alimentario ubicada en Valencia y alrededores. Contrato indefinido en una empresa consolidada del sector FMCG. Salario competitivo entre 28.000 y 32.000 EUR anuales. Oportunidad de desarrollo profesional en el departamento de Ingeniería y Fabricación. Ambiente de trabajo profesional y enfocado en la innovación. Excel, Power BI

Role OverviewDescubra más sobre las tareas diarias, las responsabilidades generales y la experiencia requerida para esta oportunidad desplazándose hacia abajo ahora.We are looking for an experienced Infrastructure Engineer with strong expertise in Google Cloud Platform (GCP) and event driven architectures to support the design, implementation, and operation of a scalable enterprise event streaming platform. You will build and manage GCP Pub/Sub infrastructure, support schema governance capabilities, and help deliver secure, reliable, and observable messaging services across the organization.Key ResponsibilitiesDesign, provision, and manage GCP Pub/Sub infrastructure.Implement security, monitoring, and operational best practices.Deliver and maintain schema registry capabilities and data contract governance.Build scalable, auditable, and replayable event driven messaging solutions.Develop Infrastructure as Code (Terraform) and platform automation.Support observability, logging, alerting, and operational readiness.Collaborate with engineering teams to establish event streaming standards.Provide platform support, troubleshooting, and continuous improvement.Maintain documentation, runbooks, and governance processes.Required Skills & ExperienceStrong experience with Google Cloud Platform (GCP).Hands on experience with GCP Pub/Sub.Experience with event driven or streaming architectures.Knowledge of schema registry and data contract management.Experience with Terraform or similar IaC tools.Familiarity with CI/CD and infrastructure automation.Experience with cloud monitoring and logging tools.Strong troubleshooting and stakeholder management skills.Nice to HaveExperience with Kafka or other event streaming technologies.Knowledge of API and event governance practices.Experience operating shared enterprise platforms.Understanding of GCP security, IAM, networking, and compliance.Exposure to DevOps and SRE practices. xhfqzwm CompensationSalary Range: €70,000 – €80,000 gross per year, depending on experience, skills, and overall fit for the role.#J-18808-Ljbffr

Overview Lead the system architecture team in HW/SW co-design to influence SoC and IP definitions with a software-first perspective. You will guide pre-silicon exploration, data-driven decisions, and hands-on engineering while mentoring senior architects and embedding software into hardware design. This role bridges architecture with customers and downstream software teams to ensure usable, debuggable platforms. You shape silicon definition and drive early collaboration across hardware and software domains. Responsabilidades • Direct, mentor, and manage the HW/SW co-design architecture team and drive performance, • Serve as primary technical liaison between architecture team and Senior Director, translating strategy into roadmaps, • Coordinate with digital, analog, software, validation, and product management to resolve trade-offs and remove bottlenecks, • Lead SoC co-architecture to balance hardware complexity, software efficiency, and user experience, • Translate customer use cases into system requirements and assess data paths for hardware accelerators, • Define core firmware architecture across bootloaders, init sequences, microcode, and kernel drivers, • Champion hardware debuggability and observability from silicon bring-up to field deployment, • Act as customer proxy to ensure intuitive platform APIs and programming models Requisitos principales, • 15+ years of system software architecture, firmware development, and HW/SW co-design, • 3+ years of engineering management or team leadership, • Expert in C/C++ for low-level embedded software, bootloaders, and device drivers in RTOS (e.g., Zephyr) and Embedded Linux, • Knowledge of memory hierarchies, AMBA AXI/AHB/APB, DMA, and RISC-V/ARM architectures, • Hands-on bring-up, JTAG debugging, and RTL (Verilog/SystemVerilog) reading/evaluation, • leadership and mentoring, • cross-functional collaboration, • effective communication, • C/C++ embedded software, • RTOS (Zephyr) and Embedded Linux, • JTAG, CoreSight debugging

Lead technology architecture for Applications, Data & AI projects, translating business goals into scalable, secure, and operable designs.

Ingeniero Industrial para un rol clave en Valencia, dando soporte al arranque de operaciones, coordinación de proyectos, supervisión logística y gestión de incidencias.

Arquitectura – Especialista en licencias y proyectos - Real Estate Somos Muppy, la proptech con mayor proyección a nivel nacional dedicada a proyectos de inversión inmobiliaria de valor.Ofrecemos a nuestros inversores un servicio completo para asegurar la rentabilidad de sus activos inmobiliari

¿Estás preparadx para un cambio y explotar tus habilidades como nunca? Sigue leyendo porque tenemos lo que buscas...¿Quiénes somos?Somos una empresa internacional con más de 18 años de experiencia en consultoría e ingeniería informática.Con más de 3500 Primers operando en 4 sectores principales en todo el mundo: IT, Telecomunicaciones, Energía e InfraestructurasNos puedes encontrar en más de 50 ciudades en todo el mundo:ESPAÑA | PORTUGAL | FRANCIA | REINO UNIDO | ITALIA | SUIZA | POLONIA | BRASIL¿Qué buscamos?Al menos 5 años de experiencia en desarrollo .NET Framework y .NET 8.Experiencia liderando equipo técnico, tareas y decisiones de arquitectura, pudiendo realizar estimaciones y análisis complejos a la par que dirigiendo al equipo.Sólida experiencia en migraciones de monolito a microservicios.Experiencia con Docker y AWS.Valorable conocimiento en patrones de diseño (DDD).Modelo híbrido en Valencia.¡¡Y lo más importante de todo que realmente estés motivadx para un cambio!¿Qué ofrecemos?Podemos asegurarte que contamos con el mejor equipo de todo el sector. Desde el proceso de selección, tu incorporación y hasta nuestro desarrollo profesional te ofrecemos un acompañamiento y un seguimiento personalizado en todo momento. Y a todo esto súmale transparencia total en todos los pasos.Pinta bien, ¿verdad?CondicionesValenciaHíbrido45.000 – 50.000Tenemos la seguridad de que ya sabes qué es lo que muchas empresas te ofrecen y por supuesto estamos a la altura:Vas a contar con un plan de carrera, crecimiento, proyección y desarrollo profesional personalizadoTendrás acceso a formación continua para que puedas estar al día.Podrás participar en proyectos nacionales e internacionales con opción a movilidad.No todo va a ser trabajar, por eso disfrutar de la tarjeta restaurante y seguro médico nos parece esencial.¡¡¡Teambuildings, afterworks y muchas más sorpresas!!!

Founded in 2003, Prosolia Energy is a leading company in the renewable energy sector with operations in Spain, Portugal, Italy, France, and Germany through our subsidiaries. La experiencia que se espera de los solicitantes, así como las habilidades y cualificaciones adicionales necesarias para este trabajo, se enumeran a continuación. Prosolia Energy is an Independent Power Producer (IPP) specialized in offering decarbonization services to our clients. We control the entire value chain of the projects through which we provide energy to our customers, including development, construction, operation, and maintenance of a variety of renewable generation and storage sources. We are committed to leading the transition of the industrial and productive sectors toward a decarbonized, sustainable, and competitive model, with a vision of decentralized energy production. Our strategic objectives for the coming years include expansion into new markets and innovation in energy solutions such as energy storage, leveraging our competitive advantages. Prosolia Energy currently has a project portfolio of over 4 GW in Europe. To manage the construction and development of this portfolio and achieve our strategic objectives, we are looking for talented professionals with high potential who want to join our team and contribute to our ongoing success. About the Role We are looking for a Technical Asset Manager to manage and optimize the performance and profitability of our renewable asset portfolio. Reporting to the Director of Technical Asset Management, you will be responsible for maximizing the value of assets through operational excellence, advanced technical analysis, and strategic lifecycle management. Main Responsibilities Operational Management & Performance Comprehensive Monitoring : Oversee, calculate, and report critical KPIs such as Performance Ratio (PR), availability, and productivity of solar installations. Incident Management : Coordinate rapid resolution of significant faults and provide follow-up reports to stakeholders. O&M Coordination : Collaborate closely with operations and maintenance teams to ensure operational efficiency and manage strategic spare parts inventories. Technical Analysis & Optimization Asset Optimization : Maximize energy production, minimize downtime, and reduce operational costs through advanced data analysis. Data Intelligence : Use digital tools and AI to analyze operational data and generate insights that optimize strategic objectives. Technical Due Diligence : Evaluate potential acquisitions and new projects, ensuring their optimal integration into the existing portfolio. Commercial & Contractual Management Technical Reporting : Prepare regular performance reports for asset owners, investors, and other stakeholders. Contract Management : Oversee rights and obligations arising from O&M, EPC contracts, PPAs, and insurance policies within the operational perimeter. Warranty Management : Manage claims to component manufacturers and oversee interventions under warranty coverage. Compliance & Sustainability Regulatory Compliance : Ensure operations comply with applicable regulations and grid operator requirements across all markets. ESG Management : Prepare sustainability reports, coordinate external audits, and monitor compliance with environmental permits. Cybersecurity : Oversee the security of SCADA systems and digital platforms, ensuring the integrity of critical data. Innovation & Strategic Development Digital Transformation : Lead digitalization initiatives and the evaluation of emerging technologies for continuous asset improvement. Lifecycle Management : Make tactical and strategic decisions regarding the full lifecycle of assets, including repowering analyses and technological upgrades. Required Profile Experience & Education 2-3 years of experience in renewable asset management (preferably photovoltaic solar) or in engineering or construction of renewable assets. Degree in Engineering (Electrical, Industrial, or related) or equivalent experience. Experience in data analysis and SCADA monitoring tools. In-depth knowledge of photovoltaic systems and performance metrics. Experience in contract management within the energy sector. Familiarity with European renewable energy regulatory frameworks. Personal Skills Languages: Fluent in English and French (Spanish is a plus). Excellent communication skills and stakeholder management. Analytical thinking and results-oriented. Team player. Employment Conditions Mode : On-site in Toulouse, Paris, Valencia or Madrid. Reporting : Director of Technical Asset Management. Scope : Portfolio of ~300 assets in Spain, Portugal, and France. xhfqzwm Travel : Occasional travel for technical visits and meetings. #J-18808-Ljbffr

Buscamos un Arquitecto de Soluciones con alta seniority para diseñar y gobernar soluciones D365 Finance y Supply Chain Management, asegurando la arquitectura técnica y funcional, integrando con el ecosistema Microsoft y liderando la toma de decisiones críticas en proyectos.

Se busca ingeniero comercial con experiencia en ventas técnicas y gestión de proyectos en el sector eléctrico para desarrollar relaciones comerciales, identificar oportunidades de negocio y coordinar proyectos en la zona de Valencia. Se ofrece contrato estable, salario competitivo y modelo híbrido.

PV Hardware (PVH) busca un Project Design Responsible para liderar el departamento de diseño de proyectos en sus oficinas de Cheste. Se requiere Ingeniería Industrial y amplia experiencia en el sector de seguidores solares, así como dominio de cálculo de estructuras y software de diseño. Se valorará más de 10 años en departamentos técnicos, Inglés avanzado y capacidad para coordinar equipos y gestionar plazos. #J-18808-Ljbffr

Expert in C/C++ for low-level embedded software, bootloaders, and device drivers in RTOS (e. Lead the system architecture team in HW/SW co-design to influence SoC and IP definitions with a software-first perspective. You will guide pre-silicon exploration, data-driven decisions, and hands-on enginee

AgileEngine is an Inc. 5000 company that creates award-winning software for Fortune 500 brands and trailblazing startups across 17+ industries. We rank among the leaders in areas like application development and AI/ML, and our people-first culture has earned us multiple Best Place to Work awards.WHY JOIN USIf you're looking for a place to grow, make an impact, and work with people who care, we'd love to meet you!ABOUT THE ROLEWe are looking for a Senior AI Engineer to design and build agentic workflows and AI-powered products for enterprise customers in higher education.MUST HAVES5+ years of experience in a software product development environment.Strong proficiency with Java and Spring Boot.Experience with relational databases.Hands-on experience building AI agents, tool-using LLM applications, or orchestrated workflows.Experience using agents to support coding, code review, testing, release management, or incident response.Senior-level experience building and operating production software systems.Experience with TypeScript, Python, RESTful APIs, and infrastructure on AWS.Experience with APIs, workflow engines, event-driven architectures, integrations, or distributed systems.Strong understanding of testing, observability, security, permissions, and failure recovery.Ability to turn ambiguous opportunities into practical, reliable technical solutions.Strong communication skills and the ability to influence engineering practices across a team.Experience building enterprise SaaS or multi-tenant systems.Leadership mindset and ability to drive changes across different teams.NICE TO HAVESExperience with multi-agent systems, RAG, vector search, agent evaluation, or human-in-the-loop workflows.Familiarity with higher education technology and its privacy and compliance requirements.Experience leading technical transformation or introducing new engineering practices.WHAT YOU WILL DODesign and build agentic workflows that coordinate tools, services, data, and human approvals.Develop reusable patterns for agent orchestration, tool use, context management, memory, and multi-agent collaboration.Use agentic coding tools throughout the development lifecycle, including planning, implementation, testing, debugging, refactoring, code review, and documentation.Integrate agents into software development, testing, deployment, support, and operational workflows.Establish standards for agent evaluation, observability, reliability, security, and governance.Prototype new agentic capabilities and turn successful experiments into production systems.Build complete, usable products—not just demonstrations or isolated model integrations.Identify opportunities to improve engineering productivity and product delivery through agentic development.Mentor engineers and help shape an agentic-first technical strategy across the organization.Collaborate with product and engineering leaders to connect agentic capabilities to meaningful outcomes.Demonstrate the ability to use AI coding agents as productive engineering collaborators across an application codebase.Provide agents with clear context, constraints, architecture, acceptance criteria, and technical direction.Review, test, secure, and improve agent-generated code rather than accepting outputs without verification.Decompose complex application work into agent-ready tasks while maintaining architectural consistency and product intent.Create workflows in which agents can reason, select tools, call APIs, manage state, recover from failures, and elevate to people when appropriate.Design agentic applications around real user needs, including intuitive experiences, reliable workflows, permissions, audit trails, and meaningful error handling.Move from prototype to production by addressing performance, scalability, security, monitoring, evaluation, cost, and ongoing maintenance.Understand problems deeply, make appropriate tradeoffs, and deliver complete solutions that customers can depend on.PERKS AND BENEFITSProfessional growth: Mentorship, TechTalks, and personalized growth roadmaps.Competitive compensation: USD-based pay with education, fitness, and team activity budgets.Exciting projects: Modern solutions with Fortune 500 and top product companies.Flextime: Flexible schedule with remote and office options.Meet Our Recruitment ProcessEach step helps us understand your skills and overall fit.If it’s a match, you’ll receive an offer.#J-18808-Ljbffr

Se busca un Ingeniero DevOps con experiencia en automatización, Openshift y Ansible para un cliente del sector bancario, con modalidad 100% teletrabajo y contrato indefinido.

En ISTOBAL GROUP Buscamos incorporar un/a Ingeniero/a de Procesos para participar en la optimización, industrialización y mejora continua de los procesos productivos de planta. Solicitar este puesto es sencillo. Desplácese hacia abajo y haga clic en "Solicitar" para ser considerado para esta posición.¿Cuáles serán tus principales funciones? Analizar y optimizar los procesos productivos, flujos de materiales y métodos de trabajo , identificando oportunidades de mejora y reducción de operaciones sin valor añadido. Controlar y parametrizar los procesos de tratamientos superficiales y pintura , asegurando las condiciones técnicas, dosificaciones y estándares de calidad. Participar en la industrialización de nuevos productos , definiendo métodos, tiempos de montaje, rutas, listas de materiales y demás parámetros productivos. Diseñar y desarrollar utillajes de montaje para mejorar la productividad, calidad y seguridad de los procesos. Participar en proyectos de mejora continua y reuniones PDCA , realizando el seguimiento de indicadores productivos como OEE y Adherencia al PDP. Mantener actualizados los métodos, tiempos, procedimientos y documentación de procesos , así como la parametrización y configuración de productos y modificaciones. Identificar incompatibilidades y asegurar la correcta configuración de las operaciones de montaje y procesos productivos . Grado en Ingeniería Industrial, Mecánica, Organización Industrial o similar . Se valorará Ingeniería Química . Experiencia en ingeniería de procesos, industrialización o mejora continua en entornos industriales. Conocimientos de Lean Manufacturing, métodos y tiempos y procesos de fabricación . Conocimientos en tratamientos superficiales y pintura industrial , valorándose además experiencia en este ámbito. xhfqzwm Capacidad analítica, orientación a la mejora y habilidad para trabajar de forma transversal con Producción, Calidad, Ingeniería y Compras. Ingeniero/a de Procesos Pinturas y Tratamientos - La Alcudia, Comunidad Valenciana, Spain #J-18808-Ljbffr

Lead full-stack engineer for a startup building an AI-powered platform to connect talent with opportunities. Responsibilities include architecture, best practices, and feature development.

Buscamos un mecánico con al menos 3 años de experiencia para realizar diagnósticos, cambios de aceite y filtros, revisión de sistemas de suspensión, frenos, escapes y neumáticos en Valencia. Se valora mecánica pesada.

ALHIST SP está especializada en el desarrollo de software como dispositivo médico, siguiendo la directiva europea 93/42/EEC. Los procesos aplicados para el diseño se adaptan tanto a los requisitos de la normativa como a las actividades incluidas en la metodología Scaled Scrum. Esto convierte a ALHIST SP en un entorno de desarrollo ágil único. Nuestra visión es, junto con las operaciones de Air Liquide Home Healthcare, y a través de las soluciones que desarrollamos, lograr la transformación del modelo de provisión de atención médica en todo el mundo y junto a ello: • Preservar la calidad de vida de los pacientes en el hogar., • Mejorar la atención y comprensión de la enfermedad gracias a la eSalud, • Anticiparse a las necesidades de los pacientes y de los profesionales sanitarios., • Construir un sistema de salud que sea eficiente y virtuoso para todos Join the Test Automation Factory as a Senior QA Automation Engineer, serving as a technical leader and cornerstone of our Valencia-based team. Your mission is to define, oversee, and actively execute a robust automation strategy that ensures high-quality software delivery for the Digital Delivery Services (DDS) Home Healthcare (HHC) department. You will lead the design of scalable frameworks while remaining deeply involved in script development and defect management. This role combines the leadership and strategic oversight of a Lead with the practical, detailed execution of an Engineer: • Strategy & Framework Design: Define the QA automation strategy for ERP/CRM platforms and in-house solutions, while designing and implementing scalable frameworks tailored to these systems., • Hands‑on Development: Design, develop, and maintain automated test scripts for critical enterprise platforms, including SAP, Salesforce, and Dynamics 365, in-house web and mobile applications., • Team Coordination & Mentoring: Coordinate a team of engineers, assigning tasks, reviewing deliverables, and providing technical guidance to ensure high-quality outcomes. Act as the local "relay" of the Test Automation Factory Manager, ensuring alignment and seamless execution of global strategy within the Valencia team., • CI/CD Integration & Optimization: Monitor and optimize the seamless integration of automated testing tools into GitLab CI/CD pipelines and cloud environments (AWS)., • Defect & Performance Management: Identify, document, and track defects collaboratively with development teams. Monitor team performance by tracking relevant operational KPIs such as test coverage and automation stability., • Stakeholder Collaboration: Collaborate with developers, operations teams, business analysts (BAs), and product owners (POs) to identify and assess automation opportunities across web, mobile, and API applications., • Advanced Tooling: Expert knowledge of Playwright (required), Tricentis Tosca (preferred)., • Cloud & DevOps: Deep understanding of GitLab CI/CD workflows, AWS cloud environments, and containerized execution., • Programming: Advanced scripting and programming knowledge in TypeScript, JavaScript, or Python., • Domain Expertise: Familiarity with ERP/CRM ecosystems (Salesforce, SAP, Dynamics 365) and REST API testing methodologies., • The "Plus" Factor: AI & Innovation – In alignment with the 2026 TAF vision, the Senior QA Automation Engineer is expected to drive AI‑first initiatives: Implement and/or maintain AI Agents, such as Smart Root Cause Analysis and automated test case generation tools; Champion the use of GitHub Copilot and Gemini to optimize test design and reduce scripting effort., • Leadership: Proven ability to drive cross‑functional collaboration, build consensus, and mentor junior team members., • Problem Solving: Strong analytical abilities to solve complex automation challenges and technical roadblocks., • Communication: Exceptional stakeholder management skills in English (Required) and Spanish (Highly Preferred), with French as a significant bonus. Nuestras Diferencias Hacen Nuestro Desempeño En Air Liquide Group, nos comprometemos a construir un lugar de trabajo diverso e inclusivo que abarque la diversidad de nuestros empleados, clientes, pacientes y de todas las partes interesadas de la comunidad y culturas de todo el mundo. Damos la bienvenida y consideramos las solicitudes de todos los solicitantes interesados. Creemos firmemente que una organización diversa abre oportunidades para que las personas expresen su talento, tanto de forma individual como colectiva, y ayuda a fomentar nuestra capacidad de innovar al vivir nuestros valores, actuar para el éxito conjunto y crear un entorno atractivo en un mundo cambiante. A world leader in gases, technologies and services for Industry and Health. Through the passion and diversity of its people, Air Liquide leverages energy and environment transition, changes in healthcare and digitization, and delivers greater value to all its stakeholders. Join us for a stimulating experience: you’ll find a world of learning and development opportunities where inventiveness is at the heart of what we do, in an open, collaborative and respectful environment. Discover what your professional journey at Air Liquide could be here! #J-18808-Ljbffr

Overview In this role you will advance mixed-signal verification for portable consumer products within a collaborative, multi-site team at Analog Devices. You will shape verification strategy, develop SVRNM models, and drive test development to ensure robust AMS blocks meet device requirements. You’ll work closely with Tier 1 OEMs and senior engineers, contributing to innovations in sensing and power/back-end verification. This is a hands-on role with opportunities to mentor and influence verification practices. Compensaciones / Beneficios • discretionary performance-based bonus, • variable compensation, • paid annual leave, • supplemental benefits Responsabilidades, • Participate as a mixed-signal verification team member across Digital/Analog/DV/Implementation/Layout in a multi-site setting, • Contribute to verification strategy and methodology improvements, • Develop traceable AMS verification plans derived from device requirements, • Code/generate SVRNM models for analog blocks and validate against schematics, • Develop directed tests in AMS environments or reuse constrained random UVM testcases, • File and track bugs to closure in Jira, • Document results and review with the team Requisitos principales, • Electronic Engineering degree with 5+ years of chip-level AMS verification experience for SOCs, • Familiarity with digital verification methodologies (DMS with UVM), • Proficiency with Cadence-based flows (schematics, simulator/netlist options), • Experience with mixed-signal simulators (Cadence AMS or equivalent), • Experience with SVRNM or Verilog-AMS models for analog blocks, • Strong programming and documentation skills, • Experience with scripting languages (Python, C, Perl) advantageous, • Team player with strong analytical and debugging abilities, • Some travel may be required, • team player, • strong analytical skills, • good debugging skills, • Cadence-based flow, • Cadence AMS, • SVRNM

Empresa líder en el diseño, fabricación y modernización de maquinaria industrial de alto rendimiento para sectores como automoción, metalurgia, energía y materiales avanzados con más de 30 años de presencia en mercados nacionales e internacionales y con proyectos en Europa, Asia y América donde apostamos por la innovación, la ingeniería de precisión y la mejora continua.Tu misiónFormarás parte del equipo de ingeniería mecánica de INREMA, participando en el desarrollo de soluciones a medida para todo tipo de clientes. Tendrás un rol clave en:Diseño y desarrollo de maquinaria y componentes mecánicos (CAD 3D, cálculos, planos de fabricación y ensamblaje).Supervisión y validación de montajes mecánicos en taller y en instalaciones de cliente.Colaboración estrecha con el equipo de proyecto multidisciplinar formado por miembros del departamento eléctrico, automatización y de producción.Elaboración de documentación técnica (manuales, listas de piezas, protocolos de montaje).Participación en proyectos internacionales desde la fase de oferta hasta la puesta en marcha.RequisitosIngeniería Mecánica o similar.Experiencia mínima de 3 años en diseño de maquinaria industrial.Dominio de software CAD 3D (SolidWorks indispensable).Conocimiento de procesos de mecanizado, soldadura y montaje mecánico para poder aplicar tolerancias a los planos que diseñes.Nivel alto de inglés técnico (B1) mínimo valorable otros idiomas.Disponibilidad para viajes nacionales o internacionales cortos.Capacidad para trabajar en equipo, proactividad y orientación a resultados.Valoraremos positivamenteExperiencia diseño y modernización o retrofit de maquinaria.Conocimientos de normativa de seguridad de máquinas (CE, ISO).Experiencia en entornos industriales internacionales.Te ofrecemosIncorporación a una empresa con fuerte proyección internacional.Participación en proyectos únicos en el mundo y de gran envergadura (hablamos de lineas de fabricación completas con máquinas, robots, sistemas de carga y descarga…).Entorno de trabajo dinámico, colaborativo y orientado a la innovación.Formación continua y plan de desarrollo profesional.Posibilidad de desarrollo de proyecto de I+D subvencionadoContrato indefinido y retribución competitiva acorde a experiencia y perfilRevisa nuestra página web, te preguntaremos a qué nos dedicamos.#J-18808-Ljbffr

Overview In this role, you will support Sales and Operations by defining technical requirements for port handling projects and adapt solutions with the global engineering team. You’ll supervise technicians, manage installations and punch lists, and ensure compliance with client needs and regulatory standards. You’ll track progress, produce reports, and promote a Total Quality culture. The position offers international travel and cross-functional collaboration within a global leader in material handling. Responsabilidades • Define technical requirements and specifications to enable successful project delivery, • Collaborate with global engineering to tailor solutions to local needs while satisfying client requirements, • Supervise technicians and contractors, train staff, verify installations, identify defects, and manage punch lists, • Monitor daily progress, produce status reports, and update project schedules to meet deadlines, • Maintain awareness of applicable regulations and standards and promote Total Quality culture Requisitos principales, • Bachelor in Mechanical Engineering, • An IWE certification and/or Master in Industrial Design valued, • Proficiency in Microsoft Office, • Minimum 3 years' experience in engineering, metal fabrication, or similar industrial environment, • Willingness to travel nationally and internationally, • Spanish (native or fluent) and strong English; second foreign language is a plus, • Proactive and self-motivated, • Strong leadership, • Solid business acumen, • Microsoft Office (Word, Excel, PowerPoint, Outlook), • Technical requirements gathering and specification, • Installation verification and punch-list management

Overview In this role you will lead the evaluation of new CSS products, developing measurement solutions and ensuring the accuracy and speed needed to meet specifications. You will collaborate across Design, Applications and Test teams to define tests, build evaluation capabilities, run analyses, and report findings. Your work directly advances sensing and power technology for consumer applications, pushing measurement capabilities forward and enabling faster time-to-market. This is a mission-driven role at the intersection of hardware and software. Responsabilidades • Determine tests for evaluating new products in collaboration with Design, Applications and Test teams, • Develop hardware and software evaluation capability for new products, • Run pre-determined tests on silicon, perform post-processing and report results, • Identify functional and performance root causes of silicon, • Develop new measurement solutions and methodologies to advance measurement capabilities Requisitos principales, • 15+ years’ engineering measurement experience, • Degree in Electrical/Electronic Engineering, or equivalent, • Strong Python (or similar) programming skills, • Strong teamwork, interpersonal and communication skills, • High coordination and leadership skills, • PCB design/layout experience, • Experience with power testing methodologies, • teamwork, • interpersonal communication, • proactivity/initiative, • Analogue and Digital Electronics knowledge, • Python programming, • PCB design/layout

Overview In this role, you own the full hardware lifecycle from concept to production and ongoing improvement. You will collaborate with Product, Software, Operations and external manufacturers to deliver reliable hardware for demanding live-event environments. You’ll balance reliability, cost, and scalability while driving hands-on engineering decisions. This position offers high impact on Fever’s mission to enhance live experiences globally through robust hardware solutions. Compensaciones / Beneficios • 40% discount on Fever experiences, • Hybrid work model, • Private health insurance, • Gympass membership, • English lessons, • Salary advance through Payflow Responsabilidades, • Lead design and development from concept through production and post-launch support, • Design electronics using microcontrollers and SBCs (Raspberry Pi, Khadas, or similar), • Build prototypes, validate solutions, and prepare for mass production, • Improve existing hardware based on operational feedback and customer needs, • Create and review architectures, schematics, PCB layouts, and BOMs, • Define manufacturing requirements and support industrialization processes, • Collaborate with suppliers and manufacturers throughout production, • Define validation plans, testing protocols, and acceptance criteria, • Perform hardware debugging with lab equipment (oscilloscope, logic analyzer, multimeter, power supplies), • Diagnose production and field issues, implement permanent solutions, • Ensure regulatory compliance (CE, RoHS, EMC, Radio Directives where applicable), • Plan production capacity and monitor inventories, • Evaluate suppliers and packaging solutions, • Document and share knowledge; maintain design, firmware, BOMs, and change history, • Train junior engineers on production and repair processes, • Act as technical reference for hardware incidents Requisitos principales, • 5+ years of professional experience designing and developing electronic hardware products, • At least 3 years in mass production and real-world deployment, • Experience across product lifecycle: specification, electronic design, prototyping, validation, industrialization, production support, • Ability to explain and defend technical decisions, • Willingness to travel occasionally and participate in on-call rotation, • ownership and accountability, • pragmatic technical decision-making, • clear communication with technical and non-technical teams, • Digital and analog electronics knowledge, • Embedded systems with Linux and/or Android, • Experience integrating Raspberry Pi, Khadas or similar SBCs

Overview In this role you will lead the evaluation of new CSS products, developing measurement solutions and ensuring the accuracy and speed needed to meet specifications. You will collaborate across Design, Applications and Test teams to define tests, build evaluation capabilities, run analyses, and report findings. Your work directly advances sensing and power technology for consumer applications, pushing measurement capabilities forward and enabling faster time-to-market. This is a mission-driven role at the intersection of hardware and software. Responsabilidades • Determine tests for evaluating new products in collaboration with Design, Applications and Test teams, • Develop hardware and software evaluation capability for new products, • Run pre-determined tests on silicon, perform post-processing and report results, • Identify functional and performance root causes of silicon, • Develop new measurement solutions and methodologies to advance measurement capabilities Requisitos principales, • 15+ years’ engineering measurement experience, • Degree in Electrical/Electronic Engineering, or equivalent, • Strong Python (or similar) programming skills, • Strong teamwork, interpersonal and communication skills, • High coordination and leadership skills, • PCB design/layout experience, • Experience with power testing methodologies, • teamwork, • interpersonal communication, • proactivity/initiative, • Analogue and Digital Electronics knowledge, • Python programming, • PCB design/layout

Seeking an Engineering Manager for an AI-native tech scale-up to build and lead a high-performing team, focusing on engineering excellence, disciplined planning, and AI-driven workflows. Requires proven management experience and technical literacy.

El mayor activo de DQS/ somos las personas que formamos el equipo, por eso nuestra propuesta de valor es People Centric. Desafiamos las estructuras rígidas de mando y apostamos por una estructura flexible, donde todas las personas somos partes iguales de un mismo todo: el DQS/team. DQS/ nos diferenciamos de otras consultoras tecnológicas por nuestro buen ambiente de trabajo y porque nos preocupamos por las personas y su bienestar, además de su desarrollo profesional y personal. En este momento, estamos buscando una persona que asuma el rol de Solution Architect para unirse a nuestro equipo. Misión: Responsable de definir, diseñar y gobernar la solución end‑to‑end sobre D365 Finance y Supply Chain Management, asegurando que la arquitectura funcional y técnica cumple con los objetivos del cliente y con los estándares de Microsoft y del partner. Su misión es traducir los procesos de negocio (finanzas, operaciones, cadena de suministro, fabricación, etc.) en una arquitectura robusta, escalable y segura, equilibrando parametrización vs. extensiones, garantizando la integración con el ecosistema Microsoft (Azure, Power Platform, Power BI/Fabric y Microsoft 365), y liderando la toma de decisiones críticas en proyectos de implantación y evolución. Es un rol de alta seniority, con capacidad de interlocución con perfiles C‑level y dirección operativa del cliente, y liderazgo transversal sobre equipos funcionales, técnicos e integradores. Responsabilidades: Arquitectura end‑to‑end y diseño de solución Liderar el diseño funcional‑técnico de la solución en D365 Finance & SCM, desde el blueprint hasta el go‑live y la evolución. Elaborar y mantener el Solution Blueprint: procesos, diseño objetivo, principios de arquitectura, decisiones clave y trade‑offs. Definir el enfoque de fit-to-standard, análisis de gaps y decisión entre configuración, extensibilidad o integración. Asegurar el cumplimiento de estándares de Microsoft (por ejemplo, buenas prácticas de diseño y enfoque de implementación). Gobierno técnico y estándares Definir y controlar el gobierno de la solución: estándares, patrones, arquitectura de integración, seguridad, y ALM. Asegurar que el desarrollo respeta el marco de extensibilidad (Chain of Command, extensiones, eventos) y evita anti‑patrones. Supervisar decisiones técnicas sobre rendimiento, escalabilidad, gestión de datos y monitorización. Integraciones y arquitectura de datos Diseñar la arquitectura de integración con sistemas externos (legados, portales, e‑commerce, logística, bancos, etc.). Seleccionar los mecanismos adecuados: APIs, OData, Data Entities, DMF, eventos, colas y patrones asíncronos. Definir estrategia de datos: migración, cargas masivas, calidad del dato, BYOD cuando aplique y reporting. Seguridad, cumplimiento y controles Definir el modelo de seguridad y acceso: roles, segregación de funciones (SoD), auditoría, trazabilidad y controles. Alinear la solución con requisitos de compliance, políticas corporativas y prácticas de ciberseguridad (con equipos especializados). Liderazgo transversal y relación con cliente Dirigir workshops de arquitectura, discovery y sesiones de diseño con stakeholders funcionales y técnicos. Actuar como interlocutor/a principal en decisiones críticas: alcance, cambios, riesgos, desviaciones, integraciones. Coordinar y alinear a consultores funcionales, desarrolladores, integradores y equipos del cliente. Calidad, riesgos y gestión del ciclo de vida Anticipar riesgos y dependencias (datos, integraciones, rendimiento, procesos críticos) y definir mitigaciones. Establecer criterios de calidad: pruebas, validaciones, cutover, readiness del go‑live, plan de estabilización y soporte. Asegurar la mantenibilidad y evolución futura: documentación, handover, guías de operación y soporte. Conocimientos técnicos imprescindibles Dynamics 365 Finance & Supply Chain (core) Dominio funcional avanzado de D365 Finance: GL, AP/AR, tesorería, activos fijos, budgeting (según alcance). Dominio funcional avanzado de D365 SCM: compras/ventas, inventario, WMS, logística, planificación/MRP. Conocimientos sólidos en fabricación (si aplica): BOM, rutas, planificación, ejecución y costes. Diseño de procesos end‑to‑end: Order‑to‑Cash, Procure‑to‑Pay, Plan‑to‑Produce, Record‑to‑Report. Ecosistema Microsoft Azure: patrones de integración, seguridad/identidad, monitorización, servicios de integración. Power Platform: Power Apps/Automate para experiencias y automatización complementaria, Dataverse cuando tenga sentido. Power BI / Fabric (según cliente): enfoque de analítica, modelos semánticos, reporting y gobernanza. Microsoft 365: integración de colaboración (Teams, SharePoint) cuando aporte valor al proceso. ALM, DevOps y gobierno Azure DevOps (Repos, Pipelines, Releases) y estrategia de versiones. LCS: entornos, deployments, gestión de hotfixes, monitorización y operación. Buenas prácticas de pruebas, UAT, performance testing y plan de cutover. Experiencia mínima recomendada 7+ años en proyectos ERP / consultoría, con experiencia relevante en D365 F&O. Participación como referente de diseño/arquitectura en al menos 2–3 proyectos de implantación completos end‑to‑end. Experiencia sólida en integraciones y estrategia de datos. Experiencia de interlocución con cliente y liderazgo transversal. Competencias clave Pensamiento arquitectónico y visión sistémica: capacidad de diseñar soluciones coherentes, escalables y sostenibles. Orientación a procesos y negocio: entiende el “por qué” del proceso y el impacto de cada decisión. Liderazgo técnico y capacidad de influencia: guía a equipos y al cliente sin depender de jerarquía. Comunicación ejecutiva: explica complejidad técnica de forma clara a stakeholders no técnicos. Gestión de riesgos y toma de decisiones: prioriza, decide y mitiga con criterio y rapidez. Negociación y gestión de expectativas: equilibra alcance, tiempos, presupuesto, calidad y viabilidad. Calidad y disciplina documental: deja trazabilidad, criterios de decisión y documentación operable. Certificaciones (muy valorables) MB‑700 (Solution Architect Expert – Finance & Operations Apps) MB‑310 / MB‑330 (según especialización) Qué ofrecemos: Contrato de trabajo indefinido, jornada completa Acuerdo de teletrabajo 50% si estás cerca de nuestras ubicaciones: Madrid, Barcelona, Castellón y Valencia. En caso contrario, 100% teletrabajo. Salario bruto anual desde 60.000€ con revisiones anuales de categoría y a determinar según formación, experiencia y entrevista técnica. Retribución flexible (restaurante, transporte, guardería, seguro médico) y variable (bono anual) Plan formativo personalizado, ligado a certificaciones Microsoft. Acceso a Universidad Corporativa y nuestros Eventos Team Building. Transparencia y honestidad. A partir de aquí, te ofrecemos todo un mundo de posibilidades por explorar y definir, alineando objetivos. En 2025 somos empresa certificada Great Place to Work por cuarto año consecutivo. En DQS/ nos comprometemos con lograr la diversidad en la plantilla en términos de género, raza, nacionalidad y cultura. Animamos a las personas de grupos minoritarios y personas con discapacidad a presentar su candidatura. Si reúnes la motivación necesaria, rellena esta solicitud de empleo para evaluar tu candidatura para unirte al DQS/team.

Staff Reliability Engineer – Utility Scale Inverter Platform Applyremote type: Hybridlocations: Valencia, Valencia- ESPtime type: Full timeposted on: Posted Todayjob requisition id: NX-4284Job Description:Staff Reliability Engineer – Utility Scale Inverter PlatformLocation: SpainAbout the RoleNextpower is seeking an experienced Staff Engineer – Product Reliability to serve as the Product Reliability Leader for our next-generation utility-scale power conversion platform. This role is responsible for leading Design for Reliability (Df R) activities throughout product development and ensuring products achieve their intended service life while meeting performance, availability, manufacturability, and warranty objectives. Working within the product development team, you will partner with Systems, Electrical, Mechanical, Firmware, Manufacturing, Supplier Quality, Product Management, Service, and Operations to proactively identify reliability risks, drive mitigation actions, and establish confidence in product readiness before commercial release. You will collaborate closely with Nextpower's global Reliability Team, leveraging expertise in semiconductor reliability, reliability modeling, materials science, failure analysis, and field reliability while maintaining overall accountability for reliability execution on the product platform.Key ResponsibilitiesProduct Reliability Leadership Serve as the Product Reliability Owner throughout product development, qualification, production launch, and early fleet deployment. Develop and execute the Product Reliability Program Plan. Establish product reliability goals aligned with customer expectations and warranty objectives. Lead reliability planning, design reviews, and development milestone assessments.* Coordinate cross-functional reliability activities and communicate residual technical risk to engineering leadership.Design for Reliability Lead DFMEA, FMECA, Fault Tree Analysis, and other structured risk assessments. Drive reliability-focused design decisions across electrical, thermal, mechanical, cooling, insulation, and electromechanical systems. Partner with reliability subject matter experts to evaluate critical failure mechanisms and design margins. Balance reliability, performance, manufacturability, schedule, and cost throughout product development.* Drive closure of reliability action items and risk mitigation plans.Reliability Validation Develop reliability validation strategies based on identified product risks and expected operating conditions. Coordinate qualification activities across internal laboratories, suppliers, manufacturing partners, and external test facilities. Lead reliability growth through EVT, DVT, PVT, and pilot builds. Review test results and determine product readiness for subsequent development phases.* Ensure validation demonstrates achievement of product reliability objectives.Supplier & Manufacturing Reliability Support qualification of contract manufacturers and key suppliers. Evaluate reliability impact of supplier, manufacturing, and component changes, including second-source qualifications. Participate in supplier technical reviews and manufacturing readiness activities. Define ongoing production reliability monitoring and support corrective actions for reliability-related issues.Field Reliability & Continuous Improvement Monitor pilot deployments, field performance, and emerging reliability trends. Lead investigations of validation failures, customer returns, production escapes, and warranty issues in collaboration with Failure Analysis teams. Drive implementation of corrective actions and integrate lessons learned into future product designs. Support product reliability assessments, warranty discussions, and fleet health reviews.QualificationsRequired* Bachelor's or Master's degree in Electrical Engineering, Mechanical Engineering, Reliability Engineering, Power Electronics, or related field.* Fluency in Spanish and English, both written and spoken, is required.* 10+ years of experience in Product Reliability, Design for Reliability, or Reliability Engineering for complex electrical or electromechanical products. Experience leading reliability activities for power conversion, industrial electronics, or other high-reliability products. Strong understanding of DFMEA, FMECA, Fault Tree Analysis, Accelerated Life Testing, Reliability Growth, and Root Cause Analysis. Experience leading cross-functional engineering teams and influencing technical decisions. Experience supporting supplier qualification, manufacturing readiness, and product introduction.* Excellent communication and leadership skills.Preferred Experience with utility-scale renewable energy systems, industrial power electronics, EV power electronics, or similar products. Familiarity with outdoor power conversion systems, thermal management, cooling systems, and passive components. Working knowledge of reliability analysis tools such as Relia Soft, ANSYS Sherlock, Windchill Quality Solutions, or equivalent. Certified Reliability Engineer (CRE) or equivalent certification. At Nextpower, we are driving the global energy transition with an integrated clean energy technology platform that combines intelligent structural, electrical, and digital solutions for utility-scale power plants. Our comprehensive portfolio enables faster project delivery, higher performance, and greater reliability, helping our customers capture the full value of solar power. Our talented worldwide teams are redefining how solar power plants are designed, built, and operated every day with smart technology, data-driven insights, and advanced automation. Together, we’re building the foundation for the world’s next generation of clean energy infrastructure.#J-18808-Ljbffr

Overview En Power Electronics, lideramos la transición hacia la energía limpia. En este rol te incorporarás al equipo de I+D de diseño de variadores de frecuencia para abordar retos de baja y media tensión. Definirás planes de validación, ejecutarás pruebas y automatizarás ensayos con Python, registrando resultados y resolviendo no conformidades. Trabajarás en un entorno internacional orientado a la innovación en energía renovable y soluciones de potencia. Buscamos impacto práctico y mejora continua en el proceso de validación. Compensaciones / Beneficios • horario flexible, • teletrabajo, • Universidad Corporativa, • comedor subvencionado, • gimnasio propio, • PEbenefits personalizados Responsabilidades, • Analizar requerimientos de diseño de variadores de frecuencia (baja y media tensión), • Definir planes de validación: pruebas, instrumentación, bancos de pruebas y planificación, • Ejecutar pruebas funcionales (control, protecciones, comunicaciones) en prototipos, • Automatizar pruebas de validación con herramientas basadas en Python, • Desarrollar herramientas internas para optimizar validación, • Registrar datos de pruebas con instrumentación de laboratorio, • Documentar resultados y reportar no conformidades, • Colaborar en la búsqueda de soluciones para no conformidades Requisitos principales, • Formación en Ingeniería Industrial, Electrónica, Eléctrica, Automática o similar, • Experiencia en validación o diseño de variadores de frecuencia, • Conocimiento de control de variadores de frecuencia (Control V/f, control vectorial), • Experiencia en programación de PLCs y manejo de variadores de frecuencia, • Manejo de instrumentación de medida (osciloscopio, analizador de potencia, sonómetros, sondas de corriente y tensión), • Conocimientos de MODBUS TCP, PROFIBUS, PROFINET, CAN, RS-485, ETHERCAT, • Experiencia en análisis de tráfico de red y tramas con Wireshark, • Experiencia previa en automatización de pruebas de laboratorio, • Programación avanzada en Python, • Nivel de inglés avanzado, • Trabajo en equipo, • Orientación a resultados, • Buena capacidad de documentación y comunicación, • Python (automatización), • Programación de PLCs, • Osciloscopio

Tu nueva empresa ¿Le interesa este puesto? Puede encontrar toda la información relevante en la descripción a continuación. Empresa del sector tecnológico busca incorporar a un/a Ingeniero/a Automatización Senior para su sede en el Vallés Occidental. Tu nuevo puesto Funciones: Diseño eléctrico, electrónico y de control: Desarrollar esquemas eléctricos detallados, garantizando la seguridad, eficiencia energética, compatibilidad electromagnética (EMC) y el cumplimiento de las normativas aplicables. Desarrollo de producto: Colaborar con equipos multidisciplinares a lo largo de todo el ciclo de vida del producto (NPI – New Product Introduction, aseguramiento de calidad), desde la conceptualización hasta la industrialización. Programación PLC: Programar e implementar la lógica de control en entornos PLC para prototipos y series personalizadas. Desarrollar software embebido para control de procesos. Gestionar y optimizar la lista de materiales (Bill of Materials) para garantizar que el diseño eléctrico sea viable para la fabricación en grandes volúmenes. Elaborar y mantener documentación detallada, incluidas especificaciones técnicas, manuales de usuario y procedimientos de mantenimiento. Diagnosticar y resolver incidencias en sistemas automatizados para minimizar el tiempo de inactividad y asegurar el rendimiento óptimo. Qué necesitarás para encajar con el puesto Grado o máster en Ingeniería Electrónica, Eléctrica, Mecatrónica, Telecomunicaciones o un campo relacionado. Mínimo 7 años de experiencia en desarrollo de producto, diseño de automatización, programación e implementación (p. ej., electrónica de consumo, automatización de edificios, automoción, dispositivos IoT, iluminación, HVAC o equipos de medición). Experiencia en lenguajes de programación PLC y conocimientos de C para sistemas embebidos. Dominio de software CAD eléctrico (EPLAN o AutoCAD Electrical). Fluidez profesional en inglés. Deseable (Nice to have): Experiencia práctica trabajando con microcontroladores y DSPs de ST, NXP, Nordic o TI. Experiencia con pipelines y automatización de tareas (Jenkins, GitLab o Bitbucket runners). Experiencia con RTOS como Zephyr, FreeRTOS y sus toolchains (incluido CMake). Experiencia en entornos de fabricación de alto volumen. Qué obtendrás a cambio Salario alrededor de 50k. Horario: 7:30/9:30h-16:30/18:30h. Restaurant Pass. Seguro médico privado. Clases de idiomas (inglés). Un entorno laboral saludable: fruta fresca diaria y gimnasio en las instalaciones. Un ambiente laboral excelente, caracterizado por la cercanía, diversidad internacional, flexibilidad y un enfoque híbrido de trabajo. xhfqzwm ¡Si encajas en la posición, no dudes en aplicar!

Overview En Power Electronics buscamos un ingeniero de validación HW para convertir requerimientos de I+D en pruebas y resultados confiables. El rol colabora con el equipo para definir planes de validación, diseñar bancos de pruebas y ejecutar ensayos ambientales, eléctricos y de compatibilidad. Serás clave para documentar resultados, identificar no conformidades y contribuir en revisiones de diseño. Esta posición te sitúa en un entorno internacional, con impacto directo en la madurez de convertidores de potencia y la calidad de soluciones. Buscamos a alguien proactivo que aporte rigor y visión de producto para impulsar la energía limpia. Compensaciones / Beneficios • horario flexible y teletrabajo, • formación continua a través de la Universidad Corporativa, • comedor subvencionado, • gimnasio propio, • PEbenefits personalizados, • Plan de Retribución Flexible Responsabilidades, • Analizar requerimientos de I+D y definir planes de validación, • Diseñar bancos de pruebas y ejecutar pruebas de validación, • Realizar ensayos ambientales, climáticos y eléctricos, • Ejecutar pruebas de modos de fallo y pre-certificación (UL, IEC, EMC), • Tomar datos con instrumentación de laboratorio y documentar resultados, • Reportar no conformidades y participar en revisiones de diseño, • Colaborar en la elaboración de AMFEs de diseño Requisitos principales, • Experiencia 2-3 años en diseño o validación HW de convertidores de potencia, • Experiencia en ensayos climáticos, ambientales, eléctricos, EMI, • Conocimientos en metrología y manejo de instrumentación de medida, • Conocimientos de protocolos de comunicaciones MODBUS TCP, CAN, RS-485, • Experiencia en automatización de pruebas de laboratorio, • Experiencia en elaboración de AMFEs de diseño, • Programación avanzada en Python, • Nivel de Inglés avanzado, • Colaboración y trabajo en equipo, • Rigor técnico y atención al detalle, • Comunicación efectiva, • MODBUS TCP, • CAN, • RS-485

Overview En Power Electronics, lideramos la transición hacia la energía limpia. En este rol te incorporarás al equipo de I+D de diseño de variadores de frecuencia para abordar retos de baja y media tensión. Definirás planes de validación, ejecutarás pruebas y automatizarás ensayos con Python, registrando resultados y resolviendo no conformidades. Trabajarás en un entorno internacional orientado a la innovación en energía renovable y soluciones de potencia. Buscamos impacto práctico y mejora continua en el proceso de validación. Compensaciones / Beneficios • horario flexible, • teletrabajo, • Universidad Corporativa, • comedor subvencionado, • gimnasio propio, • PEbenefits personalizados Responsabilidades, • Analizar requerimientos de diseño de variadores de frecuencia (baja y media tensión), • Definir planes de validación: pruebas, instrumentación, bancos de pruebas y planificación, • Ejecutar pruebas funcionales (control, protecciones, comunicaciones) en prototipos, • Automatizar pruebas de validación con herramientas basadas en Python, • Desarrollar herramientas internas para optimizar validación, • Registrar datos de pruebas con instrumentación de laboratorio, • Documentar resultados y reportar no conformidades, • Colaborar en la búsqueda de soluciones para no conformidades Requisitos principales, • Formación en Ingeniería Industrial, Electrónica, Eléctrica, Automática o similar, • Experiencia en validación o diseño de variadores de frecuencia, • Conocimiento de control de variadores de frecuencia (Control V/f, control vectorial), • Experiencia en programación de PLCs y manejo de variadores de frecuencia, • Manejo de instrumentación de medida (osciloscopio, analizador de potencia, sonómetros, sondas de corriente y tensión), • Conocimientos de MODBUS TCP, PROFIBUS, PROFINET, CAN, RS-485, ETHERCAT, • Experiencia en análisis de tráfico de red y tramas con Wireshark, • Experiencia previa en automatización de pruebas de laboratorio, • Programación avanzada en Python, • Nivel de inglés avanzado, • Trabajo en equipo, • Orientación a resultados, • Buena capacidad de documentación y comunicación, • Python (automatización), • Programación de PLCs, • Osciloscopio

Buscamos un Director de Proyecto para liderar un proyecto industrial clave en Sagunto, gestionando equipos, plazos, costes y calidad para asegurar el éxito.