Ingenieria jobs in AlbalCreate job alertsNo experience

Role highlights: Test Engineer Location: Valencia Reports to: Laboratory Lead and Test Architect Employment type: Permanent Workplace model: Onsite Employment is subject to applicable security screening (incl. SUPO, where required) Why this role matters: As our Lab Test Engineer, you’ll plan, run, automate and document the lab’s tests across simulation, signal capture, playback and hardware in the loop, so results are repeatable and trusted. ICEYE is building a space-based RF constellation covering 100 MHz to 30 GHz alongside its SAR fleet, and the Experimentation Lab in Valencia is where we develop, simulate and validate that capability. We simulate the constellation and its emitters end to end, capture real signals from real hardware, and generate and play back signals through a channel simulator for end-to-end runs and algorithm validation. A lab that only its builders can operate becomes shelfware. Specialists will build the simulation, the capture system and the playback chain, and you’ll turn those into tests that run reliably, on schedule, with traceable results. The role covers the full breadth of the lab: setting up hardware, running campaigns, automating procedures, keeping equipment calibrated and inventoried, and producing evidence that engineers and customers can rely on. You’ll have an early seat in a new lab, with direct influence on how ICEYE builds and proves this capability. Who We Are ICEYE is the world leader in sovereign intelligence from space. We deliver persistent monitoring capabilities to detect and respond to changes in any location on Earth. ICEYE owns the world's largest and most advanced SAR (synthetic aperture radar) satellite constellation. To our customers we provide intelligence with unmatched quality, latency and revisit times, in any weather, day or night. To governments who choose to operate their own constellation we provide this proven capability as a sovereign system. ICEYE-built constellations serve customers in defence and intelligence, environmental monitoring, insurance and emergency management. We enable fast decisions that contribute to a safer future. Founded and headquartered in Finland, ICEYE operates globally with over 1000 employees across Europe, North America, the Middle East, and Asia-Pacific. Your day-to-day responsibilities Plan and run tests across all three lab missions: end-to-end simulation runs, emitter capture sessions, playback and channel simulator campaigns, flatsat and receiver tests, and algorithm validation. Write procedures and automate them: turn manual setups into scripted, repeatable test sequences, and add them to regression so each software or firmware build is checked. Set up and maintain the lab: instruments, SDRs, cabling, fixtures, the screened enclosure and emitter bays, network and compute. Track calibration, configuration and inventory so every result records what produced it. Manage test data: keep recordings, run outputs and metadata organised, searchable and backed up, with the provenance to reproduce a result. Analyse and report: compare results to expectations and to previous runs, flag regressions and anomalies, write concise test reports, and log issues with the evidence needed to fix them. Support campaigns in the field and in the air, customer and partner demonstrations, and the reproduction of on-orbit anomalies on the ground. Run the lab safely: RF safety, ESD, equipment handling, access control and the handling rules for controlled material. What we’re looking for Must haves: Hands-on test experience in an electronics, RF, space or comparable hardware lab: test setups, procedures, execution and reporting Comfort with lab instruments (oscilloscopes, spectrum analysers, signal generators, power supplies) and basic RF practice (connectors, attenuators, cable loss) Scripting for test automation and data analysis, typically Python An organised and rigorous way of working: you write things down, version them, and can reproduce last month’s result Clear written English Nice to haves: Satellite AIT, flatsat or hardware-in-the-loop testing SDR experience, RF capture or signal analysis Test automation frameworks, CI pipelines, instrument control (SCPI/VISA) Test data management, databases, dashboards Verification under a formal process (ECSS or similar) Experience setting up a lab from scratch: equipment selection, layout, safety, calibration programme Spanish, for working with local suppliers and facilities Eligibility for national security clearance (an advantage) What success looks like 6 months: lab equipment is inventoried, calibrated and configuration-tracked, and capture and playback sessions run from written procedures, with data stored and findable. 12 months: core tests are automated and running in regression, test reports are produced routinely, and you’ve supported the first field campaign. 24 months: the lab runs as a service. Other teams book and run tests with your procedures, and results arrive with the evidence attached. Application Process Application Screening TA call Hiring Manager call Onsite interview Working at ICEYE At ICEYE, you’ll join a diverse and highly engaged team united by the ambition to make the impossible possible. As a global scale-up, we combine speed and ambition with the opportunity to take real ownership from day one. Your growth, wellbeing, and success are a priority, with continuous professional development, training opportunities, and a culture where collaboration is how we win. How We Work (Our Values) Make the impossible possible: We set ambitious goals and stay calm under pressure. We bring grit, optimism, and ownership when things get hard, and we keep moving until we find a way. Be curious: Go deep, ask questions, listen carefully, and think critically. Understand the “why” behind decisions. See the big picture: Stay close to what’s happening across the company so you can make better decisions. Consider how your work affects others. Drive effective teamwork: Create psychological safety, invite different perspectives, and build inclusive teams. There are no bad questions. Act as one team: We win together. We match tasks to the right owner and stay agile as priorities shift. Have fun: What we do matters—and it should be enjoyable. Celebrate progress, take pride in results, and share the wins. Benefits Our benefits are designed to support your health and wellbeing, at work and beyond. We keep improving them based on employee feedback, and offerings vary by location. Talent Acquisition will confirm what applies for this role and location during the process. Our Commitment to Diversity, Equity, and Inclusion We want ICEYE to be a place where people can be themselves and do great work. Different backgrounds and perspectives make us stronger, which is why we work to create an environment where people feel included, respected, and able to speak up. Whatever your background, we want you to bring your authentic self to the table. We’re committed to fair, inclusive hiring and equal opportunity. Everyone is welcome to apply. If you need any adjustments or support during the recruitment process, tell us—we’ll do our best to help. Apply now to start your ICEYE journey, and help us continue to make the impossible possible together. Read more about ICEYE and working with us at iceye.com. #J-18808-Ljbffr

Incorporate testability into software architectures with software designers. Lead and mentor the test team and promote software industry best practices. Python and PyTest development for software systems.

ALHIST SP está especializada en el desarrollo de software como dispositivo médico, siguiendo la directiva europea 93/42/EEC. Los procesos aplicados para el diseño se adaptan tanto a los requisitos de la normativa como a las actividades incluidas en la metodología Scaled Scrum. Esto convierte a ALHIST SP en un entorno de desarrollo ágil único. Nuestra visión es, junto con las operaciones de Air Liquide Home Healthcare, y a través de las soluciones que desarrollamos, lograr la transformación del modelo de provisión de atención médica en todo el mundo y junto a ello: • Preservar la calidad de vida de los pacientes en el hogar., • Mejorar la atención y comprensión de la enfermedad gracias a la eSalud, • Anticiparse a las necesidades de los pacientes y de los profesionales sanitarios., • Construir un sistema de salud que sea eficiente y virtuoso para todos Join the Test Automation Factory as a Senior QA Automation Engineer, serving as a technical leader and cornerstone of our Valencia-based team. Your mission is to define, oversee, and actively execute a robust automation strategy that ensures high-quality software delivery for the Digital Delivery Services (DDS) Home Healthcare (HHC) department. You will lead the design of scalable frameworks while remaining deeply involved in script development and defect management. This role combines the leadership and strategic oversight of a Lead with the practical, detailed execution of an Engineer: • Strategy & Framework Design: Define the QA automation strategy for ERP/CRM platforms and in-house solutions, while designing and implementing scalable frameworks tailored to these systems., • Hands‑on Development: Design, develop, and maintain automated test scripts for critical enterprise platforms, including SAP, Salesforce, and Dynamics 365, in-house web and mobile applications., • Team Coordination & Mentoring: Coordinate a team of engineers, assigning tasks, reviewing deliverables, and providing technical guidance to ensure high-quality outcomes. Act as the local "relay" of the Test Automation Factory Manager, ensuring alignment and seamless execution of global strategy within the Valencia team., • CI/CD Integration & Optimization: Monitor and optimize the seamless integration of automated testing tools into GitLab CI/CD pipelines and cloud environments (AWS)., • Defect & Performance Management: Identify, document, and track defects collaboratively with development teams. Monitor team performance by tracking relevant operational KPIs such as test coverage and automation stability., • Stakeholder Collaboration: Collaborate with developers, operations teams, business analysts (BAs), and product owners (POs) to identify and assess automation opportunities across web, mobile, and API applications., • Advanced Tooling: Expert knowledge of Playwright (required), Tricentis Tosca (preferred)., • Cloud & DevOps: Deep understanding of GitLab CI/CD workflows, AWS cloud environments, and containerized execution., • Programming: Advanced scripting and programming knowledge in TypeScript, JavaScript, or Python., • Domain Expertise: Familiarity with ERP/CRM ecosystems (Salesforce, SAP, Dynamics 365) and REST API testing methodologies., • The "Plus" Factor: AI & Innovation – In alignment with the 2026 TAF vision, the Senior QA Automation Engineer is expected to drive AI‑first initiatives: Implement and/or maintain AI Agents, such as Smart Root Cause Analysis and automated test case generation tools; Champion the use of GitHub Copilot and Gemini to optimize test design and reduce scripting effort., • Leadership: Proven ability to drive cross‑functional collaboration, build consensus, and mentor junior team members., • Problem Solving: Strong analytical abilities to solve complex automation challenges and technical roadblocks., • Communication: Exceptional stakeholder management skills in English (Required) and Spanish (Highly Preferred), with French as a significant bonus. Nuestras Diferencias Hacen Nuestro Desempeño En Air Liquide Group, nos comprometemos a construir un lugar de trabajo diverso e inclusivo que abarque la diversidad de nuestros empleados, clientes, pacientes y de todas las partes interesadas de la comunidad y culturas de todo el mundo. Damos la bienvenida y consideramos las solicitudes de todos los solicitantes interesados. Creemos firmemente que una organización diversa abre oportunidades para que las personas expresen su talento, tanto de forma individual como colectiva, y ayuda a fomentar nuestra capacidad de innovar al vivir nuestros valores, actuar para el éxito conjunto y crear un entorno atractivo en un mundo cambiante. A world leader in gases, technologies and services for Industry and Health. Through the passion and diversity of its people, Air Liquide leverages energy and environment transition, changes in healthcare and digitization, and delivers greater value to all its stakeholders. Join us for a stimulating experience: you’ll find a world of learning and development opportunities where inventiveness is at the heart of what we do, in an open, collaborative and respectful environment. Discover what your professional journey at Air Liquide could be here! #J-18808-Ljbffr

Overview In this role you will advance mixed-signal verification for portable consumer products within a collaborative, multi-site team at Analog Devices. You will shape verification strategy, develop SVRNM models, and drive test development to ensure robust AMS blocks meet device requirements. You’ll work closely with Tier 1 OEMs and senior engineers, contributing to innovations in sensing and power/back-end verification. This is a hands-on role with opportunities to mentor and influence verification practices. Compensaciones / Beneficios • discretionary performance-based bonus, • variable compensation, • paid annual leave, • supplemental benefits Responsabilidades, • Participate as a mixed-signal verification team member across Digital/Analog/DV/Implementation/Layout in a multi-site setting, • Contribute to verification strategy and methodology improvements, • Develop traceable AMS verification plans derived from device requirements, • Code/generate SVRNM models for analog blocks and validate against schematics, • Develop directed tests in AMS environments or reuse constrained random UVM testcases, • File and track bugs to closure in Jira, • Document results and review with the team Requisitos principales, • Electronic Engineering degree with 5+ years of chip-level AMS verification experience for SOCs, • Familiarity with digital verification methodologies (DMS with UVM), • Proficiency with Cadence-based flows (schematics, simulator/netlist options), • Experience with mixed-signal simulators (Cadence AMS or equivalent), • Experience with SVRNM or Verilog-AMS models for analog blocks, • Strong programming and documentation skills, • Experience with scripting languages (Python, C, Perl) advantageous, • Team player with strong analytical and debugging abilities, • Some travel may be required, • team player, • strong analytical skills, • good debugging skills, • Cadence-based flow, • Cadence AMS, • SVRNM

Seeking an Engineering Manager for an AI-native tech scale-up to build and lead a high-performing team, focusing on engineering excellence, disciplined planning, and AI-driven workflows. Requires proven management experience and technical literacy.

Overview In this role you will lead the evaluation of new CSS products, developing measurement solutions and ensuring the accuracy and speed needed to meet specifications. You will collaborate across Design, Applications and Test teams to define tests, build evaluation capabilities, run analyses, and report findings. Your work directly advances sensing and power technology for consumer applications, pushing measurement capabilities forward and enabling faster time-to-market. This is a mission-driven role at the intersection of hardware and software. Responsabilidades • Determine tests for evaluating new products in collaboration with Design, Applications and Test teams, • Develop hardware and software evaluation capability for new products, • Run pre-determined tests on silicon, perform post-processing and report results, • Identify functional and performance root causes of silicon, • Develop new measurement solutions and methodologies to advance measurement capabilities Requisitos principales, • 15+ years’ engineering measurement experience, • Degree in Electrical/Electronic Engineering, or equivalent, • Strong Python (or similar) programming skills, • Strong teamwork, interpersonal and communication skills, • High coordination and leadership skills, • PCB design/layout experience, • Experience with power testing methodologies, • teamwork, • interpersonal communication, • proactivity/initiative, • Analogue and Digital Electronics knowledge, • Python programming, • PCB design/layout

Westernacher Consulting is seeking an SAP FI/CO Solution Architect to join our Spain-based consulting team. You will shape end-to-end SAP S/4 HANA Finance and Controlling solutions, translating complex transformation goals into scalable, integrated architectures.You will combine deep SAP Finance expertise with advisory and leadership, collaborating across international project teams and guiding decisions for cross-functional integration.#J-18808-Ljbffr

Lead AI Engineer sought to design, implement, and deploy ML solutions, focusing on LLMs and NLP. Will lead a team, manage microservices, and collaborate on cloud platforms. Remote work from Palma.

PowerCo Spain Battery Spain S.A.U. in Sagunto (Valencia) is seeking a logistics automation engineer to design and implement automated intra-logistics solutions, including AGVs, ASRS and conveyors, to boost material handling efficiency.You will collaborate with cross-functional teams, optimize warehouse layouts, ensure safety compliance, document processes, and coordinate with headquarters across Salzgitter and other plants to drive CAPEX/OPEX projects.

Lead full-stack engineer for a startup building an AI-powered platform to connect talent with opportunities. Responsibilities include architecture, best practices, and feature development.

Buscamos un Arquitecto de Soluciones con alta seniority para diseñar y gobernar soluciones D365 Finance y Supply Chain Management, asegurando la arquitectura técnica y funcional, integrando con el ecosistema Microsoft y liderando la toma de decisiones críticas en proyectos.

Ingeniero de Compras con experiencia en consultoría e ingeniería informática, buscando un cambio profesional. Se requiere experiencia en Compras en ingenierías u Oil & Gas, manejo de herramientas eTool, SAP y Excel avanzado. Se valora formación en compras o comercio internacional.

Seeking a Senior Platform Engineer to design and scale internal infrastructure, focusing on architecture, Kubernetes, standardization, and developer experience to enable faster engineering team progress.

En Savills España, consultora inmobiliaria internacional, queremos incorporar un/a Ingeniero/a para formar parte de la División de Arquitectura basado/a en nuestras oficinas de Madrid.Funciones: Desarrollo de Due Diligence técnicas y auditoría de instalaciones sobre edificios existentes oficinas

Ingeniero Industrial para un rol clave en Valencia, dando soporte al arranque de operaciones, coordinación de proyectos, supervisión logística y gestión de incidencias.

Overview In this role you will lead the design and implementation of scalable, secure data platforms to enable strategic decisions. You will work closely with cross-functional teams to align architecture with the company’s mission and governance standards. You’ll tackle architecture-driven challenges at scale, shaping data platforms that support enterprise analytics and ML initiatives. This position offers hybrid work, international mobility, and a clear path for career growth within a collaborative, performance‑driven environment. Compensaciones / Beneficios • Hybrid working model, • Relocation package, • Flexible compensation, • Wellbeing program, • Career plan development and training, • Language learning support Responsabilidades, • Lead the architecture and implementation of scalable, secure data platforms, • Drive deployment and integration of enterprise platforms on IBM Watsonx, Azure, and Google Cloud, • Ensure security, scalability, and performance across solutions, • Apply data governance to platform design, • Define and enforce architectural standards and best practices, • Collaborate with cross-functional teams, influence stakeholders, and communicate strategic vision Requisitos principales, • Big Data expert with experience designing and implementing scalable, secure, high-performance architectures, • Cloud platforms, MLOps, or tools such as Hadoop, Spark, and Kafka, • Cross-functional collaboration, • Stakeholder influence, • Effective communication, • IBM Watsonx, • Azure, • Google Cloud

Glory Global busca un/a Field Service Engineer para Valencia, encargado de operar y mantener máquinas en instalaciones de clientes y oficinas.No sabe con seguridad qué habilidades necesitará para esta oportunidad? Simplemente lea la descripción completa a continuación para obtener una idea clar

Se busca ingeniero comercial con experiencia en ventas técnicas y gestión de proyectos en el sector eléctrico para desarrollar relaciones comerciales, identificar oportunidades de negocio y coordinar proyectos en la zona de Valencia. Se ofrece contrato estable, salario competitivo y modelo híbrido.

Founded in 2003, Prosolia Energy is a leading company in the renewable energy sector with operations in Spain, Portugal, Italy, France, and Germany through our subsidiaries. La experiencia que se espera de los solicitantes, así como las habilidades y cualificaciones adicionales necesarias para este trabajo, se enumeran a continuación. Prosolia Energy is an Independent Power Producer (IPP) specialized in offering decarbonization services to our clients. We control the entire value chain of the projects through which we provide energy to our customers, including development, construction, operation, and maintenance of a variety of renewable generation and storage sources. We are committed to leading the transition of the industrial and productive sectors toward a decarbonized, sustainable, and competitive model, with a vision of decentralized energy production. Our strategic objectives for the coming years include expansion into new markets and innovation in energy solutions such as energy storage, leveraging our competitive advantages. Prosolia Energy currently has a project portfolio of over 4 GW in Europe. To manage the construction and development of this portfolio and achieve our strategic objectives, we are looking for talented professionals with high potential who want to join our team and contribute to our ongoing success. About the Role We are looking for a Technical Asset Manager to manage and optimize the performance and profitability of our renewable asset portfolio. Reporting to the Director of Technical Asset Management, you will be responsible for maximizing the value of assets through operational excellence, advanced technical analysis, and strategic lifecycle management. Main Responsibilities Operational Management & Performance Comprehensive Monitoring : Oversee, calculate, and report critical KPIs such as Performance Ratio (PR), availability, and productivity of solar installations. Incident Management : Coordinate rapid resolution of significant faults and provide follow-up reports to stakeholders. O&M Coordination : Collaborate closely with operations and maintenance teams to ensure operational efficiency and manage strategic spare parts inventories. Technical Analysis & Optimization Asset Optimization : Maximize energy production, minimize downtime, and reduce operational costs through advanced data analysis. Data Intelligence : Use digital tools and AI to analyze operational data and generate insights that optimize strategic objectives. Technical Due Diligence : Evaluate potential acquisitions and new projects, ensuring their optimal integration into the existing portfolio. Commercial & Contractual Management Technical Reporting : Prepare regular performance reports for asset owners, investors, and other stakeholders. Contract Management : Oversee rights and obligations arising from O&M, EPC contracts, PPAs, and insurance policies within the operational perimeter. Warranty Management : Manage claims to component manufacturers and oversee interventions under warranty coverage. Compliance & Sustainability Regulatory Compliance : Ensure operations comply with applicable regulations and grid operator requirements across all markets. ESG Management : Prepare sustainability reports, coordinate external audits, and monitor compliance with environmental permits. Cybersecurity : Oversee the security of SCADA systems and digital platforms, ensuring the integrity of critical data. Innovation & Strategic Development Digital Transformation : Lead digitalization initiatives and the evaluation of emerging technologies for continuous asset improvement. Lifecycle Management : Make tactical and strategic decisions regarding the full lifecycle of assets, including repowering analyses and technological upgrades. Required Profile Experience & Education 2-3 years of experience in renewable asset management (preferably photovoltaic solar) or in engineering or construction of renewable assets. Degree in Engineering (Electrical, Industrial, or related) or equivalent experience. Experience in data analysis and SCADA monitoring tools. In-depth knowledge of photovoltaic systems and performance metrics. Experience in contract management within the energy sector. Familiarity with European renewable energy regulatory frameworks. Personal Skills Languages: Fluent in English and French (Spanish is a plus). Excellent communication skills and stakeholder management. Analytical thinking and results-oriented. Team player. Employment Conditions Mode : On-site in Toulouse, Paris, Valencia or Madrid. Reporting : Director of Technical Asset Management. Scope : Portfolio of ~300 assets in Spain, Portugal, and France. xhfqzwm Travel : Occasional travel for technical visits and meetings. #J-18808-Ljbffr

AgileEngine is an Inc. 5000 company that creates award-winning software for Fortune 500 brands and trailblazing startups across 17+ industries. We rank among the leaders in areas like application development and AI/ML, and our people-first culture has earned us multiple Best Place to Work awards.WHY JOIN USIf you're looking for a place to grow, make an impact, and work with people who care, we'd love to meet you!ABOUT THE ROLEWe are looking for a Senior AI Engineer to design and build agentic workflows and AI-powered products for enterprise customers in higher education.MUST HAVES5+ years of experience in a software product development environment.Strong proficiency with Java and Spring Boot.Experience with relational databases.Hands-on experience building AI agents, tool-using LLM applications, or orchestrated workflows.Experience using agents to support coding, code review, testing, release management, or incident response.Senior-level experience building and operating production software systems.Experience with TypeScript, Python, RESTful APIs, and infrastructure on AWS.Experience with APIs, workflow engines, event-driven architectures, integrations, or distributed systems.Strong understanding of testing, observability, security, permissions, and failure recovery.Ability to turn ambiguous opportunities into practical, reliable technical solutions.Strong communication skills and the ability to influence engineering practices across a team.Experience building enterprise SaaS or multi-tenant systems.Leadership mindset and ability to drive changes across different teams.NICE TO HAVESExperience with multi-agent systems, RAG, vector search, agent evaluation, or human-in-the-loop workflows.Familiarity with higher education technology and its privacy and compliance requirements.Experience leading technical transformation or introducing new engineering practices.WHAT YOU WILL DODesign and build agentic workflows that coordinate tools, services, data, and human approvals.Develop reusable patterns for agent orchestration, tool use, context management, memory, and multi-agent collaboration.Use agentic coding tools throughout the development lifecycle, including planning, implementation, testing, debugging, refactoring, code review, and documentation.Integrate agents into software development, testing, deployment, support, and operational workflows.Establish standards for agent evaluation, observability, reliability, security, and governance.Prototype new agentic capabilities and turn successful experiments into production systems.Build complete, usable products—not just demonstrations or isolated model integrations.Identify opportunities to improve engineering productivity and product delivery through agentic development.Mentor engineers and help shape an agentic-first technical strategy across the organization.Collaborate with product and engineering leaders to connect agentic capabilities to meaningful outcomes.Demonstrate the ability to use AI coding agents as productive engineering collaborators across an application codebase.Provide agents with clear context, constraints, architecture, acceptance criteria, and technical direction.Review, test, secure, and improve agent-generated code rather than accepting outputs without verification.Decompose complex application work into agent-ready tasks while maintaining architectural consistency and product intent.Create workflows in which agents can reason, select tools, call APIs, manage state, recover from failures, and elevate to people when appropriate.Design agentic applications around real user needs, including intuitive experiences, reliable workflows, permissions, audit trails, and meaningful error handling.Move from prototype to production by addressing performance, scalability, security, monitoring, evaluation, cost, and ongoing maintenance.Understand problems deeply, make appropriate tradeoffs, and deliver complete solutions that customers can depend on.PERKS AND BENEFITSProfessional growth: Mentorship, TechTalks, and personalized growth roadmaps.Competitive compensation: USD-based pay with education, fitness, and team activity budgets.Exciting projects: Modern solutions with Fortune 500 and top product companies.Flextime: Flexible schedule with remote and office options.Meet Our Recruitment ProcessEach step helps us understand your skills and overall fit.If it’s a match, you’ll receive an offer.#J-18808-Ljbffr

Overview En Power Electronics buscamos un ingeniero mecánico que diseñe y desarrolle soluciones para automatización industrial. Trabajarás en colaboración con procesos, producción y calidad para optimizar instalaciones y equipos, desarrollando utillajes, bancos de ensayo y documentación técnica. Participarás en la validación de sistemas mecánicos y en mejoras continuas para reducir tiempos de ciclo y aumentar productividad. Esta función te conecta con un equipo global que impulsa la energía renovable y la eficiencia operativa, con foco en innovación y calidad. Compensaciones / Beneficios • Horario flexible, • Formación continua a través de la Universidad Corporativa, • Comedor subvencionado, • Gimnasio propio, • PEbenefits personalizados, • Retribución flexible (transporte, guardería, formación) Responsabilidades, • Participar en el análisis de pliegos de condiciones desde el punto de vista mecánico, • Desarrollar diseño mecánico de proyectos de automatización e integrar maquinaria y flujo de materiales, • Diseñar utillajes, equipos auxiliares y bancos de ensayo orientados a optimizar procesos, • Elaborar documentación técnica del proyecto (planos, materiales, especificaciones, manuales), • Apoyar la puesta en marcha y validación de sistemas mecánicos, • Colaborar con procesos, producción, mantenimiento y calidad para identificar mejoras y reducir tiempos de ciclo, • Resolver incidencias o no conformidades con proveedores proponiendo soluciones técnicas, • Realizar simulaciones mecánicas y cálculos estructurales para garantizar seguridad e integridad de equipos, • Participar en iniciativas de mejora continua, estandarización y optimización de diseños Requisitos principales, • Experiencia mínima de 1 año en diseño mecánico y/o automatización industrial, • Inglés B2, • Conocimientos en Modelado 3D (preferible 3DExperience CATIA), • Nivel profesional de Office; valorable SAP, • Formación en Ingeniería Mecánica, Industrial o similar, • Colaboración con equipos multifuncionales, • Enfoque en mejora continua, • Resolución de incidencias y toma de decisiones técnicas, • Modelado 3D (CATIA), • 3DExperience (deseable), • SAP (valorable)

Overview En Power Electronics, lideras el desarrollo, industrialización y mejora de procesos de fabricación electrónica para garantizar calidad, eficiencia y seguridad. Colaboras estrechamente con producción, calidad e ingeniería para impulsar proyectos de automatización y reingeniería. Analizas KPIs y propones acciones basadas en datos para optimizar rendimiento. Esta función te sitúa en el centro de la transformación de la fabricación hacia un futuro sostenible, con oportunidades de crecimiento internacional. Buscamos un perfil proactivo que contribuya a la robustez y la innovación de nuestros procesos. Compensaciones / Beneficios • Horario flexible, • Formación continua a través de la Universidad Corporativa, • Comedor subvencionado, • Gimnasio propio, • PEbenefits personalizados, • Plan de Retribución Flexible Responsabilidades, • Definir, implementar y optimizar procesos automáticos de fabricación electrónica, • Liderar mejoras de proceso y resolución avanzada de incidencias en planta, • Programar y optimizar maquinaria SMD/THT (pick & place, SPI, AOI, hornos, Rayos‑X, etc.), • Analizar KPIs y proponer acciones de mejora basadas en datos, • Coordinar proyectos multidisciplinares y colaborar con producción, calidad e ingeniería, • Mantener documentación técnica de proceso (PFMEA, HO, instrucciones) Requisitos principales, • 4 años de experiencia en procesos de fabricación electrónica y automatización, • Inglés B2, • Experiencia en programación de maquinaria SMD (Mycronic, ASMPT, Koh Young, DEK, Ersa, Comet, ASYS…), • colaboración interdisciplinaria, • orientación a datos, • trabajo en equipo, • programación de maquinaria SMD (Mycronic, ASMPT, Koh Young, DEK, Ersa, Comet, ASYS), • análisis de KPIs, • PFMEA

At DATAPAO, data ignites passion, community fuels collaboration, and growth knows no bounds.¿Le gusta esta oportunidad? Asegúrese de inscribirse rápido, ya que se espera un gran volumen de solicitudes. Desplácese hacia abajo para leer la descripción completa del puesto.We are a leading Data Engineering and AI consulting company backed by Databricks and recognized for our unmatched delivery standards and rapid growth. We have been named Databricks EMEA Emerging Business Partner of the Year (2024), achieved the Golden Tier status in the Databricks Partner Program, and made three consecutive appearances on the Financial Times FT1000 list.We are currently looking for aSenior AI Engineerto join us remotely in Spain. As our first hire in this geography, you could play a pivotal role in, potentially, setting up a physical hub in Spain. We currently serve our customers from our delivery hub in Budapest (Hungary) and through our remote consultants in the UK, but we’re considering expanding the team internationally with a 2nd delivery hub in EMEA. You will work with our EMEA and US customers to help them solve their data architecture, ML, Generative AI, MLOps and cloud migration puzzles.What will you do?As our first AI Engineer in Spain, you’ll lead engagements to help our customersbuild and productionize tailored AI applications in the Databricks platform, using the latest technologies to deliver business impact for our top clients. You’llown the technical deliveryof AI solutions, whether you’re working solo as an AI Engineer or heading up a delivery team.Your responsibilities will span across the following dimensions:Project Planning & DeliveryTechnical Architecture:Lead the technical scoping, design high-level architectures, and define the roadmap for AI and Generative AI solutions; Execution & Leadership:Take ownership - either delivering the project independently or acting as the Technical Lead for a team of engineers; Customer Interface:Serve as the primary technical contact for our customers, ensuring the systems you build solve their specific business challenges; Strategic Advisory:Between active project cycles, act as a senior technical advisor for our EMEA customers and Databricks partners to navigate complex Generative AI and traditional Machine Learning challenges.AI & Platform ConsultancyProduction-Grade Solutions:Build robust and scalable solution architectures that leverage the latest technologies; Enablement:Lead technical workshops to empower client teams, ensuring they have the expertise to manage and scale the AI platforms you help them deploy.What does it take to fit the bill?Technical ExpertiseYou have 5+ years of experience in AI or Machine Learning Engineeringwith a focus on cloud platforms (AWS, Azure, GCP); You are proficientin MLOps using MLflow- taking models from local environments to fully automated, monitored production pipelines; You have experience building production systemsin Databricks or in a comparable enterprise cloud environment, utilizing PySpark, SQL, Delta Lake, and Unity Catalog (or similar enterprise governance); You have a good understanding of Large Language Models (LLMs)and experience implementing them using modern frameworks and libraries; You have strong Python knowledgeof the most common Data Science and ML libraries; You have good knowledge of data visualization tools/libraries; [BONUS]:Proficiency in deep learning frameworks (PyTorch/TensorFlow) or distributed computing (Spark).Consulting & Client-Facing SkillsIdeally, you bring a proven history in consulting, from scoping to gathering requirements, designing solutions, and communicating effectively with stakeholders. If you bring a product company background with you, that’s also fine as long as you can show a good consulting mindset and desire to be customer-facing; You’ve successfully delivered projectslike end-to-end, fully automated ML solutions, or production-ready Generative AI applications in Databricks or in a comparable enterprise cloud environment; You excel in explaining technical concepts to non-technical audiencesand drive decision-making.Operational Readiness & Soft SkillsYou’re (almost) ready to hit the ground running, immediately contributing to live client projects; In a fast-paced consulting environment,where no two days are the same, flexibility and problem-solving comes naturally to you. Furthermore, resilience and thriving on challenges are essential traits in our industry; Your communicationskills are on point —whether you’re writing, speaking, or collaborating with stakeholders, you know how to keep everyone in the loop.We know that the perfect candidate doesn’t always check every single box. If you’re excited about this role and have the foundational skills we’re looking for, we encourage you to apply anyway.What do we offer?You’ll have the rare opportunity to join DATAPAO at a time when you can still meaningfully impact our growth trajectory and organizational success. Furthermore, as our first-ever Spain hire, you could meaningfully contribute to expanding our local presence and, eventually, establishing a physical hub in this geography.Here is a list of some other extras we offer:The chance to work remotely- as we don’t have a physical office in Spain yet, we offer a fully remote setup for the time being. However, given our strong community emphasis, we’d expect you to spend one month in our Budapest hub during onboarding and visit the office for one week every quarter; World‑class educational benefits- there’s no shortage of learning opportunities at DATAPAO, meaning that you’ll get access to Databricks' public and internal courses to learn all the tricks of Distributed Data Processing, MLOps, Apache Spark, Databricks, and Cloud Migration from the best. Additionally, we’ll pay for various data & cloud certifications, you’ll get dedicated time for learning during work hours, and access to our internal library; Flexible PTO days- we’re flexible with how many days you take off if that does not conflict with customer success and the work getting done; Fully paid MedicalLeave for up to 15 days per year- because when you’re unwell, we want you to focus on recovery and not worry about your paycheck; Comprehensive private health insurance plan via Allianz- offered via our EOR (Employer of Record) provider,. Remote will be your official employer in Spain for the foreseeable future until we establish our own legal entity in Spain; Employee Assistance Program (EAP) via Allianz & Remote- life always happens! And we’d like to be there for you when it counts the most. Through EAP, we offer our employees access to psychology, financial, and legal consulting services via phone or in person; Top‑notch working equipment- working comfortably means working well. You will get a MacBook Pro and a sign‑up bonus of 500 EUR gross (to be paid with your first payroll) to set up your home office or whatever else is needed to give your best; The chance to makean impact in a high‑transparency culture- open feedback and no politics are things we value a lot at DATAPAO. Additionally, you’ll get the chance to work in the field of data & AI and shape the future of a rapidly growing tech company.IMPORTANT NOTE:Given that we are still sorting our way in Spain, this list will likely get an update in the following months, and we’re also committed to growing it with us over time.The gross salary for this position ranges from75.000 to 85.000 EUR/year, depending on your assessed seniority level during the selection process.Please note that currently we are unable to support transfer or offer full sponsorship for Skilled Worker visas as we’re just setting foot into Spain.Want to know more about us?DATAPAODATAPAO is a data engineering and AI company that covers the entire data transformation from architecture to implementation. Beyond delivering solutions, we also provide data and AI training and enablement.We are backed by Databricks - the creators of Apache Spark, and act as a delivery partner and training provider for them in Europe. Additionally, we are Microsoft Gold Partners in delivering cloud migration and data architecture on Azure. Our delivery partnerships enable us to work in a wide range of industries and with some of the most prominent global companies, such as Norsk‑Hydro, Richter, Bayer, Schufa, GetYourGuide, TechnoAlpin, and Logically, to name just a few.As a training provider, we deliver onsite and online courses globally for Databricks and on our own. We have been teaching professionals at Apple, Amazon, Uber, Microsoft, T‑Mobile, GE, Ericsson, and many more to improve their impact with data.We’re firm believers in scaling up a team without judgment or prejudice. What we really care about is working with the best people out there, no matter their background. And you should also not worry if you don’t tick every box in the requirements. If you’re passionate about data and learning new things, you’ll fit right in, and we’d love to hear back from you.And we hear back, we’d like you to know that we are committed to your privacy and keeping your data safe. We do not share your data with any third parties (except the ones we use to run our recruitment process) and keep your application for two years unless you ask us otherwise. xhfqzwm We use your data solely for recruitment purposes, such as letting you know about new career opportunities at DATAPAO and/or managing your application.If you want to find out more, you can always follow us on LinkedIn for all the good stuff or just hit our recruitment team at .#J-18808-Ljbffr

Overview In this role, you own the full hardware lifecycle from concept to production and ongoing improvement. You will collaborate with Product, Software, Operations and external manufacturers to deliver reliable hardware for demanding live-event environments. You’ll balance reliability, cost, and scalability while driving hands-on engineering decisions. This position offers high impact on Fever’s mission to enhance live experiences globally through robust hardware solutions. Compensaciones / Beneficios • 40% discount on Fever experiences, • Hybrid work model, • Private health insurance, • Gympass membership, • English lessons, • Salary advance through Payflow Responsabilidades, • Lead design and development from concept through production and post-launch support, • Design electronics using microcontrollers and SBCs (Raspberry Pi, Khadas, or similar), • Build prototypes, validate solutions, and prepare for mass production, • Improve existing hardware based on operational feedback and customer needs, • Create and review architectures, schematics, PCB layouts, and BOMs, • Define manufacturing requirements and support industrialization processes, • Collaborate with suppliers and manufacturers throughout production, • Define validation plans, testing protocols, and acceptance criteria, • Perform hardware debugging with lab equipment (oscilloscope, logic analyzer, multimeter, power supplies), • Diagnose production and field issues, implement permanent solutions, • Ensure regulatory compliance (CE, RoHS, EMC, Radio Directives where applicable), • Plan production capacity and monitor inventories, • Evaluate suppliers and packaging solutions, • Document and share knowledge; maintain design, firmware, BOMs, and change history, • Train junior engineers on production and repair processes, • Act as technical reference for hardware incidents Requisitos principales, • 5+ years of professional experience designing and developing electronic hardware products, • At least 3 years in mass production and real-world deployment, • Experience across product lifecycle: specification, electronic design, prototyping, validation, industrialization, production support, • Ability to explain and defend technical decisions, • Willingness to travel occasionally and participate in on-call rotation, • ownership and accountability, • pragmatic technical decision-making, • clear communication with technical and non-technical teams, • Digital and analog electronics knowledge, • Embedded systems with Linux and/or Android, • Experience integrating Raspberry Pi, Khadas or similar SBCs

Overview En Power Electronics, participarás en el desarrollo y validación de soluciones de testeo para cargadores de vehículos eléctricos, asegurando cumplimiento de normativas y calidad. Trabajarás estrechamente con fabricación, puesta en marcha y otros departamentos para garantizar la correcta implementación de bancos de pruebas y la fiabilidad de los equipos. Identificarás incidencias, propondrás mejoras y apoyarás a producción para entregar soluciones robustas. Formas parte de una empresa con visión de transformar la energía en progreso, en un entorno multicultural con crecimiento internacional. Esta oportunidad te permite impactar directamente en la seguridad y eficiencia de soluciones de prueba Compensaciones / Beneficios • horario flexible y modalidad híbrida, • formación continua a través de la Universidad Corporativa, • comedor subvencionado, • gimnasio propio, • PEbenefits personalizados, • Plan de Retribución Flexible: transporte, guardería, formación Responsabilidades, • Diseñar y documentar procedimientos de testeo eléctrico para cargadores de vehículos, • Analizar y definir requisitos técnicos de equipos de pruebas, • Validar funcionamiento de sistemas de testeo e identificar mejoras, • Diseñar bancos de testeo eléctricos en colaboración con fabricación y puesta en marcha, • Investigar y resolver incidencias en pruebas externas o en campo, • Dar soporte técnico a producción durante procesos de testeo, • Colaborar con otros departamentos en tareas transversales, • Cumplir con procedimientos internos y políticas de seguridad y salud laborales Requisitos principales, • +2 años en testeo eléctrico, validación de equipos o diseño de bancos de pruebas, • Licenciatura o Grado Universitario (ingeniería eléctrica, electrónica o similar), • Inglés B2, • Conocimientos avanzados en Office 365 para documentación y análisis de datos, • Office 365, • diseño de bancos de pruebas, • t eo de pruebas eléctricas, • validación de equipos, • análisis de fallos, • mejora de rendimiento

¿Estás preparadx para un cambio y explotar tus habilidades como nunca? Sigue leyendo porque tenemos lo que buscas...¿Quiénes somos?Somos una empresa internacional con más de 18 años de experiencia en consultoría e ingeniería informática.Con más de 3500 Primers operando en 4 sectores principales en todo el mundo: IT, Telecomunicaciones, Energía e InfraestructurasNos puedes encontrar en más de 50 ciudades en todo el mundo:ESPAÑA | PORTUGAL | FRANCIA | REINO UNIDO | ITALIA | SUIZA | POLONIA | BRASIL¿Qué buscamos?Al menos 5 años de experiencia en desarrollo .NET Framework y .NET 8.Experiencia liderando equipo técnico, tareas y decisiones de arquitectura, pudiendo realizar estimaciones y análisis complejos a la par que dirigiendo al equipo.Sólida experiencia en migraciones de monolito a microservicios.Experiencia con Docker y AWS.Valorable conocimiento en patrones de diseño (DDD).Modelo híbrido en Valencia.¡¡Y lo más importante de todo que realmente estés motivadx para un cambio!¿Qué ofrecemos?Podemos asegurarte que contamos con el mejor equipo de todo el sector. Desde el proceso de selección, tu incorporación y hasta nuestro desarrollo profesional te ofrecemos un acompañamiento y un seguimiento personalizado en todo momento. Y a todo esto súmale transparencia total en todos los pasos.Pinta bien, ¿verdad?CondicionesValenciaHíbrido45.000 – 50.000Tenemos la seguridad de que ya sabes qué es lo que muchas empresas te ofrecen y por supuesto estamos a la altura:Vas a contar con un plan de carrera, crecimiento, proyección y desarrollo profesional personalizadoTendrás acceso a formación continua para que puedas estar al día.Podrás participar en proyectos nacionales e internacionales con opción a movilidad.No todo va a ser trabajar, por eso disfrutar de la tarjeta restaurante y seguro médico nos parece esencial.¡¡¡Teambuildings, afterworks y muchas más sorpresas!!!

Buscamos un Director de Proyecto para liderar un proyecto industrial clave en Sagunto, gestionando equipos, plazos, costes y calidad para asegurar el éxito.

Arquitecto de datos para liderar equipo de Big Data en entorno Cloud AWS. Se requiere experiencia en plataformas de datos, patrones cloud, DevOps, Python, Spark, ETL, Sagemaker, Snowflake, DBT, infraestructuras como código y metodologías ágiles. Inglés B2-C1.

Tu nueva empresa ¿Le interesa este puesto? Puede encontrar toda la información relevante en la descripción a continuación. Empresa del sector tecnológico busca incorporar a un/a Ingeniero/a Automatización Senior para su sede en el Vallés Occidental. Tu nuevo puesto Funciones: Diseño eléctrico, electrónico y de control: Desarrollar esquemas eléctricos detallados, garantizando la seguridad, eficiencia energética, compatibilidad electromagnética (EMC) y el cumplimiento de las normativas aplicables. Desarrollo de producto: Colaborar con equipos multidisciplinares a lo largo de todo el ciclo de vida del producto (NPI – New Product Introduction, aseguramiento de calidad), desde la conceptualización hasta la industrialización. Programación PLC: Programar e implementar la lógica de control en entornos PLC para prototipos y series personalizadas. Desarrollar software embebido para control de procesos. Gestionar y optimizar la lista de materiales (Bill of Materials) para garantizar que el diseño eléctrico sea viable para la fabricación en grandes volúmenes. Elaborar y mantener documentación detallada, incluidas especificaciones técnicas, manuales de usuario y procedimientos de mantenimiento. Diagnosticar y resolver incidencias en sistemas automatizados para minimizar el tiempo de inactividad y asegurar el rendimiento óptimo. Qué necesitarás para encajar con el puesto Grado o máster en Ingeniería Electrónica, Eléctrica, Mecatrónica, Telecomunicaciones o un campo relacionado. Mínimo 7 años de experiencia en desarrollo de producto, diseño de automatización, programación e implementación (p. ej., electrónica de consumo, automatización de edificios, automoción, dispositivos IoT, iluminación, HVAC o equipos de medición). Experiencia en lenguajes de programación PLC y conocimientos de C para sistemas embebidos. Dominio de software CAD eléctrico (EPLAN o AutoCAD Electrical). Fluidez profesional en inglés. Deseable (Nice to have): Experiencia práctica trabajando con microcontroladores y DSPs de ST, NXP, Nordic o TI. Experiencia con pipelines y automatización de tareas (Jenkins, GitLab o Bitbucket runners). Experiencia con RTOS como Zephyr, FreeRTOS y sus toolchains (incluido CMake). Experiencia en entornos de fabricación de alto volumen. Qué obtendrás a cambio Salario alrededor de 50k. Horario: 7:30/9:30h-16:30/18:30h. Restaurant Pass. Seguro médico privado. Clases de idiomas (inglés). Un entorno laboral saludable: fruta fresca diaria y gimnasio en las instalaciones. Un ambiente laboral excelente, caracterizado por la cercanía, diversidad internacional, flexibilidad y un enfoque híbrido de trabajo. xhfqzwm ¡Si encajas en la posición, no dudes en aplicar!

Overview In this role you will lead the evaluation of new CSS products, developing measurement solutions and ensuring the accuracy and speed needed to meet specifications. You will collaborate across Design, Applications and Test teams to define tests, build evaluation capabilities, run analyses, and report findings. Your work directly advances sensing and power technology for consumer applications, pushing measurement capabilities forward and enabling faster time-to-market. This is a mission-driven role at the intersection of hardware and software. Responsabilidades • Determine tests for evaluating new products in collaboration with Design, Applications and Test teams, • Develop hardware and software evaluation capability for new products, • Run pre-determined tests on silicon, perform post-processing and report results, • Identify functional and performance root causes of silicon, • Develop new measurement solutions and methodologies to advance measurement capabilities Requisitos principales, • 15+ years’ engineering measurement experience, • Degree in Electrical/Electronic Engineering, or equivalent, • Strong Python (or similar) programming skills, • Strong teamwork, interpersonal and communication skills, • High coordination and leadership skills, • PCB design/layout experience, • Experience with power testing methodologies, • teamwork, • interpersonal communication, • proactivity/initiative, • Analogue and Digital Electronics knowledge, • Python programming, • PCB design/layout

Overview En Power Electronics, lideras soluciones que impulsan un futuro más limpio mediante innovación tecnológica. En esta función apoyarás a ingeniería de ventas en la fase de preventa y participarás en el desarrollo de herramientas de cálculo y simulación para proyectos fotovoltaicos. Trabajarás con clientes para definir requerimientos y facilitarás la comunicación entre I+D y ventas. Contribuye al dimensionamiento de plantas y a la configuración de inversores y PPC, en un entorno multicisciplinario con enfoque en sostenibilidad. Compensaciones / Beneficios • Horario flexible y modalidad híbrida, • Formación continua a través de la Universidad Corporativa, • Comedor subvencionado, • Gimnasio propio, • PEbenefits personalizados, • Seguro médico Responsabilidades, • Revisar solicitudes de información de clientes y brindar apoyo técnico a ingeniería de ventas en preventa, • Aplicar códigos y normas pertinentes para asesoramiento y soluciones, • Desarrollar herramientas de cálculo y simulación de productos y proyectos, y configuradores, • Participar en la elaboración de requerimientos de nuevo producto a partir de interacción con clientes, • Crear y gestionar el sistema de consultas técnicas dirigidas a I+D mediante Powermine, • Realizar y revisar estudios de dimensionamiento de plantas fotovoltaicas y la parametrización/configuración de inversores y PPC Requisitos principales, • Licenciatura en ingeniería eléctrica, electrónica o energías renovables, • Al menos 1 año de experiencia en electrónica de potencia, • Inglés B2, • Conocimiento y experiencia en PVsyst, • Conocimiento y experiencia en DIgSILENT Power Factory, • Conocimiento de instalaciones fotovoltaicas

Se busca un Arquitecto Java Senior con experiencia en Java y JavaFX, preferiblemente en banca.

Principal Recruitment Consultant | Robotics, Artificial Intelligence, Semiconductor, Telecommunications - AI / SW / HW Engineering/ResearchLea el resumen de esta oportunidad para comprender qué habilidades, incluidas las habilidades interpersonales relevantes y el dominio de paquetes de software, se requieren.We're hiring for an experiencedSenior DevOps Engineerwith experience in Kubernetes for a rapidly expanding and well established software company headquartered in Switzerland.Position:Full-timeSeniority level:Mid-Senior levelJob function:Software DevelopmentLocation: Main remote work in Spain or Poland with travel to Madrid or Berlin twice a month.Payroll: Employed via a payroll provider such as Deel on a local Swiss employment contract.Salary: €70,000-€100,000 depending on experience, with possible flexibility for highly qualified candidates.Qualifications5+ years in DevOps EngineeringExperience with Kubernetes and TerraformKnowledge of Kafka would be nice to haveAWS would also be greatBenefits & ReferralsWe offer a fantastic referral scheme that we would be happy to discuss.Legal & PrivacyBy applying to this role you understand that we may collect your personal data and store and process it on our systems. xhfqzwm For more information please see our Privacy Notice.#J-18808-Ljbffr

El mayor activo de DQS/ somos las personas que formamos el equipo, por eso nuestra propuesta de valor es People Centric. Desafiamos las estructuras rígidas de mando y apostamos por una estructura flexible, donde todas las personas somos partes iguales de un mismo todo: el DQS/team. DQS/ nos diferenciamos de otras consultoras tecnológicas por nuestro buen ambiente de trabajo y porque nos preocupamos por las personas y su bienestar, además de su desarrollo profesional y personal. En este momento, estamos buscando una persona que asuma el rol de Solution Architect para unirse a nuestro equipo. Misión: Responsable de definir, diseñar y gobernar la solución end‑to‑end sobre D365 Finance y Supply Chain Management, asegurando que la arquitectura funcional y técnica cumple con los objetivos del cliente y con los estándares de Microsoft y del partner. Su misión es traducir los procesos de negocio (finanzas, operaciones, cadena de suministro, fabricación, etc.) en una arquitectura robusta, escalable y segura, equilibrando parametrización vs. extensiones, garantizando la integración con el ecosistema Microsoft (Azure, Power Platform, Power BI/Fabric y Microsoft 365), y liderando la toma de decisiones críticas en proyectos de implantación y evolución. Es un rol de alta seniority, con capacidad de interlocución con perfiles C‑level y dirección operativa del cliente, y liderazgo transversal sobre equipos funcionales, técnicos e integradores. Responsabilidades: Arquitectura end‑to‑end y diseño de solución Liderar el diseño funcional‑técnico de la solución en D365 Finance & SCM, desde el blueprint hasta el go‑live y la evolución. Elaborar y mantener el Solution Blueprint: procesos, diseño objetivo, principios de arquitectura, decisiones clave y trade‑offs. Definir el enfoque de fit-to-standard, análisis de gaps y decisión entre configuración, extensibilidad o integración. Asegurar el cumplimiento de estándares de Microsoft (por ejemplo, buenas prácticas de diseño y enfoque de implementación). Gobierno técnico y estándares Definir y controlar el gobierno de la solución: estándares, patrones, arquitectura de integración, seguridad, y ALM. Asegurar que el desarrollo respeta el marco de extensibilidad (Chain of Command, extensiones, eventos) y evita anti‑patrones. Supervisar decisiones técnicas sobre rendimiento, escalabilidad, gestión de datos y monitorización. Integraciones y arquitectura de datos Diseñar la arquitectura de integración con sistemas externos (legados, portales, e‑commerce, logística, bancos, etc.). Seleccionar los mecanismos adecuados: APIs, OData, Data Entities, DMF, eventos, colas y patrones asíncronos. Definir estrategia de datos: migración, cargas masivas, calidad del dato, BYOD cuando aplique y reporting. Seguridad, cumplimiento y controles Definir el modelo de seguridad y acceso: roles, segregación de funciones (SoD), auditoría, trazabilidad y controles. Alinear la solución con requisitos de compliance, políticas corporativas y prácticas de ciberseguridad (con equipos especializados). Liderazgo transversal y relación con cliente Dirigir workshops de arquitectura, discovery y sesiones de diseño con stakeholders funcionales y técnicos. Actuar como interlocutor/a principal en decisiones críticas: alcance, cambios, riesgos, desviaciones, integraciones. Coordinar y alinear a consultores funcionales, desarrolladores, integradores y equipos del cliente. Calidad, riesgos y gestión del ciclo de vida Anticipar riesgos y dependencias (datos, integraciones, rendimiento, procesos críticos) y definir mitigaciones. Establecer criterios de calidad: pruebas, validaciones, cutover, readiness del go‑live, plan de estabilización y soporte. Asegurar la mantenibilidad y evolución futura: documentación, handover, guías de operación y soporte. Conocimientos técnicos imprescindibles Dynamics 365 Finance & Supply Chain (core) Dominio funcional avanzado de D365 Finance: GL, AP/AR, tesorería, activos fijos, budgeting (según alcance). Dominio funcional avanzado de D365 SCM: compras/ventas, inventario, WMS, logística, planificación/MRP. Conocimientos sólidos en fabricación (si aplica): BOM, rutas, planificación, ejecución y costes. Diseño de procesos end‑to‑end: Order‑to‑Cash, Procure‑to‑Pay, Plan‑to‑Produce, Record‑to‑Report. Ecosistema Microsoft Azure: patrones de integración, seguridad/identidad, monitorización, servicios de integración. Power Platform: Power Apps/Automate para experiencias y automatización complementaria, Dataverse cuando tenga sentido. Power BI / Fabric (según cliente): enfoque de analítica, modelos semánticos, reporting y gobernanza. Microsoft 365: integración de colaboración (Teams, SharePoint) cuando aporte valor al proceso. ALM, DevOps y gobierno Azure DevOps (Repos, Pipelines, Releases) y estrategia de versiones. LCS: entornos, deployments, gestión de hotfixes, monitorización y operación. Buenas prácticas de pruebas, UAT, performance testing y plan de cutover. Experiencia mínima recomendada 7+ años en proyectos ERP / consultoría, con experiencia relevante en D365 F&O. Participación como referente de diseño/arquitectura en al menos 2–3 proyectos de implantación completos end‑to‑end. Experiencia sólida en integraciones y estrategia de datos. Experiencia de interlocución con cliente y liderazgo transversal. Competencias clave Pensamiento arquitectónico y visión sistémica: capacidad de diseñar soluciones coherentes, escalables y sostenibles. Orientación a procesos y negocio: entiende el “por qué” del proceso y el impacto de cada decisión. Liderazgo técnico y capacidad de influencia: guía a equipos y al cliente sin depender de jerarquía. Comunicación ejecutiva: explica complejidad técnica de forma clara a stakeholders no técnicos. Gestión de riesgos y toma de decisiones: prioriza, decide y mitiga con criterio y rapidez. Negociación y gestión de expectativas: equilibra alcance, tiempos, presupuesto, calidad y viabilidad. Calidad y disciplina documental: deja trazabilidad, criterios de decisión y documentación operable. Certificaciones (muy valorables) MB‑700 (Solution Architect Expert – Finance & Operations Apps) MB‑310 / MB‑330 (según especialización) Qué ofrecemos: Contrato de trabajo indefinido, jornada completa Acuerdo de teletrabajo 50% si estás cerca de nuestras ubicaciones: Madrid, Barcelona, Castellón y Valencia. En caso contrario, 100% teletrabajo. Salario bruto anual desde 60.000€ con revisiones anuales de categoría y a determinar según formación, experiencia y entrevista técnica. Retribución flexible (restaurante, transporte, guardería, seguro médico) y variable (bono anual) Plan formativo personalizado, ligado a certificaciones Microsoft. Acceso a Universidad Corporativa y nuestros Eventos Team Building. Transparencia y honestidad. A partir de aquí, te ofrecemos todo un mundo de posibilidades por explorar y definir, alineando objetivos. En 2025 somos empresa certificada Great Place to Work por cuarto año consecutivo. En DQS/ nos comprometemos con lograr la diversidad en la plantilla en términos de género, raza, nacionalidad y cultura. Animamos a las personas de grupos minoritarios y personas con discapacidad a presentar su candidatura. Si reúnes la motivación necesaria, rellena esta solicitud de empleo para evaluar tu candidatura para unirte al DQS/team.

Overview In this role, you will support Sales and Operations by defining technical requirements for port handling projects and adapt solutions with the global engineering team. You’ll supervise technicians, manage installations and punch lists, and ensure compliance with client needs and regulatory standards. You’ll track progress, produce reports, and promote a Total Quality culture. The position offers international travel and cross-functional collaboration within a global leader in material handling. Responsabilidades • Define technical requirements and specifications to enable successful project delivery, • Collaborate with global engineering to tailor solutions to local needs while satisfying client requirements, • Supervise technicians and contractors, train staff, verify installations, identify defects, and manage punch lists, • Monitor daily progress, produce status reports, and update project schedules to meet deadlines, • Maintain awareness of applicable regulations and standards and promote Total Quality culture Requisitos principales, • Bachelor in Mechanical Engineering, • An IWE certification and/or Master in Industrial Design valued, • Proficiency in Microsoft Office, • Minimum 3 years' experience in engineering, metal fabrication, or similar industrial environment, • Willingness to travel nationally and internationally, • Spanish (native or fluent) and strong English; second foreign language is a plus, • Proactive and self-motivated, • Strong leadership, • Solid business acumen, • Microsoft Office (Word, Excel, PowerPoint, Outlook), • Technical requirements gathering and specification, • Installation verification and punch-list management

Spain-Valencia Full time Req-51842 The Senior Specialist, AI Product and Delivery is a delivery-focused role within the THV Europe organization, responsible for translating how work is carried out today into AI-enabled workflows that are designed, built, deployed and adopted across the region. Reporting to the Senior Manager, THV Europe Strategy & AI, this role combines business analysis, product thinking and hands-on technical delivery across the region's AI products and agent portfolio. The position works closely with business teams to understand and redesign workflows, translate requirements into practical solutions and take initiatives from initial concept through implementation and established use. • Analyze and map priority business workflows across functions, identifying where effort is concentrated, where handoffs create delays and where AI-enabled solutions can improve efficiency and effectiveness., • Lead workflow mapping and requirements sessions with commercial, medical and other cross-functional teams, developing a clear understanding of how work is performed today and how processes could be redesigned., • Translate business needs into clear technical and functional specifications that internal teams or external delivery partners can build against., • Assess and prioritize AI opportunities, determining which workflows justify redesign and investment based on business value, feasibility and expected impact., • Develop and maintain working knowledge of AI platforms and solutions, making configuration changes, enhancements and fixes directly where appropriate rather than relying exclusively on external support., • Build and deploy AI agents and agentic workflows, including connecting relevant data sources where engineering or technical integration is required., • Support the data pipelines, cloud services and technical infrastructure that enable the region's AI products and solutions., • Own and maintain the knowledge and content foundation supporting AI solutions, including identifying authoritative sources, establishing consistent content structures, managing appropriate access by function and preparing data for effective use., • Partner with IT, regional and global teams to explain AI platforms and architecture, translating technical considerations into clear business language and supporting alignment across functions., • Own testing, validation and acceptance of solutions delivered by external partners, including requirements definition, quality assessment and final sign-off., • Support AI solutions through implementation and adoption, working with impacted teams to embed redesigned workflows into day-to-day business activities., • Contribute to building AI literacy across the organization by delivering training, demonstrations and practical guidance on how AI tools and solutions can be applied effectively., • Contribute to AI governance standards for solutions developed and deployed within the region, ensuring appropriate documentation, registration and adherence to established requirements., • Support the annual planning cycle through analysis, estimates and supporting materials related to AI initiatives and priorities., • Represent the team in cross-functional forums and working groups and contribute to enablement materials, training and demonstration sessions as required. Bachelor's Degree or equivalent in a related field and a minimum of 5 years of relevant experience in business analysis, product delivery, data, software, AI or related roles; or Master's Degree or equivalent in a related field and a minimum of 3 years of relevant experience. A high standard of written and spoken English is required. • Demonstrated experience taking solutions from requirements through implementation and established use, with a strong focus on delivery rather than analysis alone., • Experience or strong familiarity with large language model tooling, APIs, AI agents and enterprise AI solutions, with the ability to further develop technical capabilities quickly., • Strong ability to understand and map complex business processes, including undocumented activities, dependencies and cross-functional handoffs., • Strong analytical and problem-solving skills, with demonstrated sound judgment in selecting appropriate methods and techniques to solve complex problems ., • Ability to translate business requirements into practical technical solutions and clearly communicate technical decisions to non-technical stakeholders., • Product-oriented mindset, with the ability to assess not only how something should be built, but also whether it should be built and where it can create meaningful business value., • Comfortable combining hands-on technical delivery with stakeholder management, moving between detailed technical tasks, business discussions and presentations to senior stakeholders., • Ability to work effectively with limited precedent and evolving priorities, establishing processes and ways of working where required., • Strong project and delivery management skills, with the ability to manage multiple initiatives and competing priorities in a dynamic environment., • Ability to collaborate effectively with commercial, medical, IT and other cross-functional teams across different markets and organizational levels., • Ability to act as a resource for colleagues with less experience and interact effectively with senior internal and external stakeholders on matters requiring cross-functional coordination., • Strong written and verbal communication skills, including the ability to deliver training, demonstrations and presentations to both technical and non-technical audiences., • Experience with Microsoft tools and applications required., • Position is based in Valencia, Spain , working on a hybrid basis, with occasional travel within Europe., • Adhere to all company rules and requirements, including Environmental Health & Safety requirements, and take appropriate measures to prevent injuries, protect the environment and prevent pollution within their span of influence/control. Edwards Lifesciences is the leading global structural heart innovation company, driven by a passion to improve patient lives. Through breakthrough technologies, world-class evidence and partnerships with clinicians and healthcare stakeholders, our employees are inspired by our patient-focused culture to deliver life-changing innovations to those who need them most. #J-18808-Ljbffr

Se buscan perfiles de Arquitecto y Ingeniero de Datos para construir una plataforma de datos en Azure y Databricks.Se requiere experiencia en diseño de plataformas, pipelines ETL/ELT, modelado de datos y trabajo con batch/streaming.Se valora el dominio de Azure, Databricks, Python/PySpark y SQL.

At Voltrac, we are on a mission to strengthen Europe’s food security and defence with an autonomous electric tractor to free farmers from drudgery and keep soldiers out of harm’s way. The 3.5 tonnes platform is currently being tested at vineyards, olive orchards and citrus groves across Spain - check out our website to see it in action. We are about to scale manufacturing to 100 units yearly, and are looking to match the sales accordingly.As part of this scaling efforts, we are looking to strengthen our engineering team. You'll work closely with the founders and contribute to every stage of product development: from understanding end-user needs through to prototyping, manufacturing, and scaling for market adoption. Within 12 months, the aim is to evolve from first customer delivery to regular production. If you're driven by curiosity, thrive in tackling hard engineering problems, and are motivated by building real-world impact with a team of sharp, mission-driven peers – this role could be a great fit.Who we areVoltrac was founded by Francisco Infante Aguirre and Thomas Hubregtsen in 2024. Francisco used to build hydrogen-powered supersonic planes at Destinus and heavy-lifting eVTOLs at Volocopter, but comes from a family that builds and sells tractor implements in over 25 countries. Thomas used to accelerate Machine Learning using GPUs, TPUs, and Quantum Computers at Google X, IBM and BMW, as well as started San Francisco-based Extropic introducing Thermodynamic computers, but also had his first job at a farm.Together, they set their sights on shaking up the market, competing directly with incumbents and startups alike. In their journey, they are supported by investors such as Extantia, Foodlabs, Antler, Push, and Prototype, who together committed a total of 9M in funding. With this, they were able to open up shop in a 1200 m² facility in Valencia, with 300m² of natural‑light office and a 900m² workshop. Valencia is consistently voted as one of Europe’s top places to live based on its low cost of living, excellent climate, and vibrant historic centre. The team is young, comes from different backgrounds, and loves to have team bbqs, but share one aim: shape Europe’s agriculture and defence with machines that do real work.TasksYou’ll take ownership of projects from concept to production – including hands‑on prototyping, detailed design, component selection and rigorous testing. The role spans a broad range of responsibilities and requires close collaboration with teams across R&D, manufacturing, and QA. More specifically, you will:Use CAD, FEA, and engineering calculations to develop robust mechanical designsPerform analysis and testing to validate and optimise system performanceInterface with suppliers and manage procurement for prototyping and productionWork in close collaboration with electronics, mechatronics, and software teams to bring prototypes to lifeLead field testing and iteration of functional prototypesOptimise tools, processes, and designs for productionRequirementsDegree in Mechanical or Aerospace Engineering (or equivalent practical experience)Demonstrated experience in hardware development, with a track record of taking designs from idea to realityStrong problem-solving and analytical skills with a hands‑on, pragmatic mindsetClear communicator with collaborative instincts, especially in multidisciplinary environmentsExperience working with welded parts, mechanical components, system architecture or fabrication will be appreciatedBenefitsWe offer a very competitive base salary, equity participation plan, aid in relocation,, and sales bonuses. Most importantly, we want to offer perks that are important to you. We’d love to hear what you value!#J-18808-Ljbffr

¿Estás preparadx para un cambio y explotar tus habilidades como nunca? Sigue leyendo porque tenemos lo que buscas...¿Quiénes somos?Somos una empresa internacional con más de 17 años de experiencia en consultoría e ingeniería informática.Con más de 3.500 Primers operando en 4 sectores principales en todo el mundo: IT, Telecomunicaciones, Energía e Infraestructuras.Nos puedes encontrar en más de 50 ciudades en todo el mundo:ESPAÑA | PORTUGAL | FRANCIA | REINO UNIDO | ITALIA | SUIZA | POLONIA | BRASILRequisitos imprescindiblesExperiencia sólida como Arquitecto Power Platform o rol similarConocimiento profundo de Power Apps (Canvas y Model-Driven), Power Automate y DataverseExperiencia en diseño de arquitecturas empresariales y gobierno de PowermPlatformIntegración mediante REST APIs, Azure Functions, Logic Apps y conectores personalizadosConocimientos de seguridad, gestión de entornos y ciclo de vida de aplicaciones (ALM)Experiencia trabajando con metodologías ágilesMuy valorableCertificaciones Microsoft Power Platform (PL-600, PL-400, PL-200, etc.)Experiencia con Dynamics 365Conocimientos de Azure, DevOps y CI/CDExperiencia liderando equipos técnicos o centros de excelencia (CoE)¡¡Y lo más importante de todo que realmente estés motivadx para un cambio!!¿Qué ofrecemos?Podemos asegurarte que contamos con el mejor equipo de todo el sector. Desde el proceso de selección, tu incorporación y hasta nuestro desarrollo profesional te ofrecemos un acompañamiento y un seguimiento personalizado en todo momento. Y a todo esto súmale transparencia total en todos los pasos.CondicionesRemoto40.000 – 55.000Pinta bien, ¿verdad?Tenemos la seguridad de que ya sabes qué es lo que muchas empresas te ofrecen y por supuesto estamos a la altura:· Vas a contar con un plan de carrera, crecimiento, proyección y desarrollo profesional personalizado.· Tendrás acceso a formación continua para que puedas estar al día.· Podrás participar en proyectos nacionales e internacionales con opción a movilidad.· No todo va a ser trabajar, por eso disfrutar de la tarjeta restaurante y seguro médico nos parece esencial.¡¡¡Teambuildings, afterworks y muchas más sorpresas!!!

Project Manager IMPRESCINDIBLE GRADO EN ARQUITECTURACompañía enfocada en proyectos de adecuación de locales comerciales, especialmente en restauración, hotelería y retail, con fuerte componente de mobiliario comercial, y ejecución rápida y de calidad.Misión del puestoGestionar y liderar de forma integral los proyectos de adecuación de locales comerciales para clientes del sector retail, restauración y hospitality, garantizando la coordinación técnica, la ejecución en obra y el cumplimiento de plazos, costes y calidad.RequisitosFormación: Arquitecto Técnico (obligatorio).Experiencia: Mínimo 5 años, ideal 10+, en:Adecuación y reforma de locales comerciales (restaurantes, hoteles, retail).Proyectos con alto componente de mobiliario y equipamiento comercial, no obra civil pura.Competencias técnicasManejo avanzado de AutoCAD y Presto.Conocimiento de mobiliario comercial, materiales y control económico.Competencias personalesPerfil espabilado, resolutivo, organizado y autónomo.Capacidad para gestionar equipos, coordinar obra y tomar decisiones sobre el terreno.Sólido criterio técnico y madurez profesional.FuncionesPlanificación, coordinación y seguimiento integral del proyecto.Presencia diaria en obra para supervisión técnica.Gestión de industriales, subcontratas y equipos propios.Control de plazos, calidad, certificaciones y costes (Presto).Gestión de materiales, logística y mobiliario comercial.Coordinación con cliente, proveedores y dirección.Disponibilidad para viajar, según la ubicación del proyecto. Banda salarial muy competente a partir de 40.000 brutos/año.

¿Estás preparadx para un cambio y explotar tus habilidades como nunca? Sigue leyendo porque tenemos lo que buscas...Es esencial asegurarse de que cumple con los requisitos como solicitante para este puesto; por favor, lea atentamente la información a continuación.¿Quiénes somos?Somos una empresa internacional con más de 17 años de experiencia en consultoría e ingeniería informática.Con más de 3.500 Primers operando en 4 sectores principales en todo el mundo: IT, Telecomunicaciones, Energía e Infraestructuras.Nos puedes encontrar en más de 50 ciudades en todo el mundo:ESPAÑA | PORTUGAL | FRANCIA | REINO UNIDO | ITALIA | SUIZA | POLONIA | BRASILRequisitos imprescindiblesExperiencia sólida como Arquitecto Power Platform o rol similarConocimiento profundo de Power Apps (Canvas y Model-Driven), Power Automate y DataverseExperiencia en diseño de arquitecturas empresariales y gobierno de PowermPlatformIntegración mediante REST APIs, Azure Functions, Logic Apps y conectores personalizadosConocimientos de seguridad, gestión de entornos y ciclo de vida de aplicaciones (ALM)Experiencia trabajando con metodologías ágilesMuy valorableCertificaciones Microsoft Power Platform (PL-600, PL-400, PL-200, etc.)Experiencia con Dynamics 365Conocimientos de Azure, DevOps y CI/CDExperiencia liderando equipos técnicos o centros de excelencia (CoE)¡¡Y lo más importante de todo que realmente estés motivadx para un cambio!!¿Qué ofrecemos?Podemos asegurarte que contamos con el mejor equipo de todo el sector. Desde el proceso de selección, tu incorporación y hasta nuestro desarrollo profesional te ofrecemos un acompañamiento y un seguimiento personalizado en todo momento. Y a todo esto súmale transparencia total en todos los pasos.CondicionesRemoto40.000 – 55.000Pinta bien, ¿verdad?Tenemos la seguridad de que ya sabes qué es lo que muchas empresas te ofrecen y por supuesto estamos a la altura:· Vas a contar con un plan de carrera, crecimiento, proyección y desarrollo profesional personalizado.· Tendrás acceso a formación continua para que puedas estar al día.· Podrás participar en proyectos nacionales e internacionales con opción a movilidad. xhfqzwm · No todo va a ser trabajar, por eso disfrutar de la tarjeta restaurante y seguro médico nos parece esencial.¡¡¡Teambuildings, afterworks y muchas más sorpresas!!!

Seeking a Senior Technical Operations Engineer to manage and optimize Mautic infrastructure (AWS, SES), ensure system stability, and improve email deliverability. Role involves PHP/Symfony development and contributing to the data platform.

Seeking a Freelance Electrical Engineer to assist with AI projects by generating prompts, defining scoring criteria, and correcting AI responses.Requires a degree and 3 years of experience.

Overview In this role, you will support Sales and Operations by defining technical requirements for port handling projects and adapt solutions with the global engineering team. You’ll supervise technicians, manage installations and punch lists, and ensure compliance with client needs and regulatory standards. You’ll track progress, produce reports, and promote a Total Quality culture. The position offers international travel and cross-functional collaboration within a global leader in material handling. Responsabilidades • Define technical requirements and specifications to enable successful project delivery, • Collaborate with global engineering to tailor solutions to local needs while satisfying client requirements, • Supervise technicians and contractors, train staff, verify installations, identify defects, and manage punch lists, • Monitor daily progress, produce status reports, and update project schedules to meet deadlines, • Maintain awareness of applicable regulations and standards and promote Total Quality culture Requisitos principales, • Bachelor in Mechanical Engineering, • An IWE certification and/or Master in Industrial Design valued, • Proficiency in Microsoft Office, • Minimum 3 years' experience in engineering, metal fabrication, or similar industrial environment, • Willingness to travel nationally and internationally, • Spanish (native or fluent) and strong English; second foreign language is a plus, • Proactive and self-motivated, • Strong leadership, • Solid business acumen, • Microsoft Office (Word, Excel, PowerPoint, Outlook), • Technical requirements gathering and specification, • Installation verification and punch-list management

Dover Imaging & Identification (DII) is a segment of Dover Corporation that includes the following brands: Markem-Imaje, Blue Bite, Solaris Laser, Systech, MS Printing Solutions and JK Group. We design, manufacture and deliver industrial equipment, consumables, software and services solutions for the marking & coding, consumer engagement, product traceability, authentication, and digital textile printing markets.Para una comprensión completa de esta oportunidad y de lo que se requerirá para ser un candidato exitoso, siga leyendo. With more than 40 offices and over 3,000 employees worldwide, DII has a presence in +28 countries and offers numerous job opportunities globally. If you're looking for an international, multidisciplinary and collaborative environment that offers a world of opportunities, come join us at DII. Location: Remote, Valencia area The Role As Field Service Engineer you will be a part of our technical service team in Spain (in your assigned area), providing technical support to our local customers. You will have an opportunity to develop your professional career in a highly professional environment with innovative equipment. What You Will Do Perform pre-installations, installations, and maintenance activities for our equipment. Deliver technical training both internally and externally as required. Complete service reports accurately, noting time confirmation, spare part usage, tasks performed, service product, fault/solution codes, installed base data maintenance (serial number, ink, counter value, functional location), reverse flow, billing block code, and billing request confirmation. Promote MI service solutions to maximize customer uptime and sales growth, maintaining a strong focus on customer satisfaction. Collaborate closely with the Sales team to build strong relationships and assist in achieving revenue targets. Travel to customer sites within your assigned area, with occasional national or international travel for training and meetings. What You Need To Have Prior experience as a Field Service Engineer or Technical Service Engineer. Technical qualification or degree in Electrical, Electronics, Networking, or Mechanics. Strong interest in emerging tech and proactive continuous learning. Prior experience with software and a strong understanding of software logic is highly advantageous. Knowledge of Vision Cameras a plus. Ability to technically assess situations and issues, and proactively advise on solutions. Capable of prioritizing and managing multiple responsibilities effectively. Excellent interpersonal and communication skills. Fluency in Spanish and upper-intermediate level of English. What We Offer Health Insurance. xhfqzwm Life Insurance: life, accident and disability. Restaurant Vouchers Flex Salary: training, nursery school, with tax benefits for the employee Public Transport Aid Employee Assistance Program Flexiwork Policy: Up to two days working from home Growth Opportunities within international environment Recruitment Referral bonus You’ll only be the right candidate if you are aligned to our values and culture: Collaborative entrepreneurial spirit Winning through customers High ethical standards, openness and trust Expectations for results Respect and value people All qualified applicants will receive consideration for employment without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law. #J-18808-Ljbffr

Ingeniero/a de producciónPerfil buscado (Hombre/Mujer) Optimizar y mejorar procesos productivos Realizar auditorías de cumplimiento de procesos Implantar propuestas de mejora Analizar resultados operativos mediante herramientas como Excel y Power BI Dar soporte al equipo de producción en las tareas habituales Velar por la Seguridad Alimentaria (SA), la Prevención de Riesgos Laborales (PRL) y la protección del Medio Ambiente (MA) en todas las actividades, procesos y gestiones en las que participes Asegurar una correcta segregación de residuos Experiencia previa de 3 años como Ingeniero/a de producción Empresa ubicada en Camp del Túria, Valencia Formación: Ingeniería Industrial o similar Experiencia mínima: 3 años en un puesto similar Competencias clave: Capacidad de trabajo en equipo y motivación por aprender y desarrollarse Conocimientos informáticos: manejo del paquete Office Formarás parte de un entorno industrial, dentro del área de procesos industriales, colaborando directamente con el equipo de producción y bajo la supervisión del Responsable de Procesos Industriales en una empresa del sector alimentario ubicada en Valencia y alrededores. Contrato indefinido en una empresa consolidada del sector FMCG. Salario competitivo entre 28.000 y 32.000 EUR anuales. Oportunidad de desarrollo profesional en el departamento de Ingeniería y Fabricación. Ambiente de trabajo profesional y enfocado en la innovación. Excel, Power BI

Buscamos un mecánico con al menos 3 años de experiencia para realizar diagnósticos, cambios de aceite y filtros, revisión de sistemas de suspensión, frenos, escapes y neumáticos en Valencia. Se valora mecánica pesada.

Focus on platform stability, automation, and technical debt reduction.