Ingenieria jobs in FuenlabradaCreate job alertsNo experience

Buscamos un Arquitecto de Infraestructuras / Arquitecto Técnico Enterprise capaz de diseñar y dimensionar la infraestructura que debe desplegarse para soportar plataformas empresariales complejas, elaborando la documentación técnica necesaria y actuando como referencia técnica en las fases de d

For our office in Madrid, we are currently looking for a Senior R&D Power Electronics Engineer.

Tu paso por Obras Grupo Rojas requiere de un mínimo de 3 a 6 meses de duración- prorrogables si ambas partes así lo acuerdan- en los que recibirás una ayuda al estudio y desarrollarás funciones bajo la supervisión de un tutor que te brindará su apoyo durante todo el proceso de aprendizaje.

Any impersonation of Airbus to do so should be reported to Airbus, we support you to work, connect and collaborate more easily and flexibly. Company:Airbus Helicopters España, SAEmployment Type:Permanent-------Experience Level:ProfessionalJob Family:Chief Engineering & Architecture By submitting

Job Description:Description of the Job:A vacancy for Environmental Qualification Engineer has been arisen within Airbus Defence & Space in Getafe.The successful applicant will join Engineering Support team to perform transversal activities within Systems Center of Competence.The job holder will support the entire development life-cycle from requirement analysis, system definition, development, environmental qualification, integration and certification/qualification in a multi platform environment. No espere a enviar su solicitud después de leer esta descripción; se espera un gran volumen de candidaturas para esta oportunidad. As there are a variety of programs in different development/in-service stages, job is quite dynamic in terms of systems involved and tasks.We are looking for a candidate passionate about engineering, who wants to make a change of prospective in its career and flexible to adapt to the most pure technical tasks with capability to manage technical interfaces, stakeholders or supplier management.Tasks & accountabilitiesYour main tasks and responsibilities will include:To support the entire system development life-cycle from requirement analysis, development, environmental qualification, integration and certification/qualification in a multi platform environment.To define Environmental Qualification requirements, Environmental Qualification test and to review test results for equipmentsDefine interfaces between functions, or between systems and to manage their consistent implementation into system(s).Provide input to checkpoints and reviews with associated maturity expectation aligned with program phases and gates. Support Environmental Qualification campaignVerify that the system's requirements are correctly & completely implementedTo ensure the product is designed according to the state-of-art and the relevant safety standardsTo ensure compliance of the product with airworthiness regulationsSupport production, reception flight testing & delivery.Required skillsWe are looking for candidates with the following skills and experience:Educated to degree level in EngineeringExperience Level in System Development more than 5 yearsExperience Level in Environmental Qualification activities more than 2 yearsFlexibility to adapt to different tasks and different environmentsEnglish Profesional Level required.This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth.WHICH BENEFITS WILL YOU HAVE AS AIRBUS EMPLOYEE?At Airbus we are focused on our employees and their welfare. Take a look at some of our social benefits:Vacation days plus additional days-off along the year.Attractive salary.Hybrid model of working when possible.Collective transport service subject to working calendar/home location.Benefits such as life insurance, health insurance, employee stock options, retirement plan, or study grants.On-site facilities (among others): free canteen, kindergarten, medical office.Possibility to collaborate in different social and corporate social responsibility initiatives.Excellent upskilling opportunities and great development prospects in a multicultural environment.Option to access special rates in products & benefits.#MYCYMThis job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth.Company:Airbus Defence and Space SAUEmployment Type:Permanent-------Experience Level:ProfessionalJob Family:Qualification & Operability By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus.Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief.Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to Airbus, we support you to work, connect and collaborate more easily and flexibly. xiphteb Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.SummaryLocation: Getafe AreaType: Full timePosted: 2026-09-14Country: SpainRequisition: JR10425868Posting ID: b4a3dd83bc64103fd8c394d35c660001

DescriptionSécheron Hasler Group continues the Swiss tradition of more than 140 years in the field of railway technology. We are one of the world's leading suppliers of electrical and electronic safety components and solutions and traction power supply systems for the railway industry, and also offer solutions for renewable energies, DC networks and other industrial systems. The name Sécheron Hasler Group is synonymous worldwide with Swiss quality and represents a leading reference for state-of-the-art products supplied to the market.With more than 1300 employees worldwide, we are where our customers are, supplying approved products in our customers' countries or markets and providing supply chain and customer services locally.For our office in Madrid, we are currently looking for an Electrical Design Engineer.Main tasks: Active participation in technical discussions on projects.Study of client specifications and preparation of technical solutions for functional and detailed diagrams.Preparation of functional logic diagrams.Design and drawing of wiring diagrams for electrical cabinets.Technical support for the project manager.Design and drawing of wiring diagrams for DC traction substations.RequirementsTechnical degree in electrical and automation industrial field or equivalent.CAD design (Schemelect, Eplan, SEE Electrical Expert, AutoCAD Electrical…)Knowledge of automation and functional logic.Successful experience as similar position (in the railway is a plus).Knowledge and proficiency of principles of Electrical distribution and their associated protection systems.Production of electrical diagrams of systems.English B2 or higher.Occasional travelling requested (a few days once every 2 months in average).Team player, autonomous, solutions oriented, problem solver, able to take technical responsibilities.Able to take technical responsibilities.BenefitsWe have flat hierarchies and direct communication between departments and management levels is encouraged. This allows us to make decisions quickly.We give our employees full responsibility for their work tasks. All employees are encouraged to take initiative and contribute to the operational excellence of the company, and have ample opportunities to achieve their personal and professional growth goals.The Sécheron Hasler Group is an equal opportunity employer and welcomes candidates from all backgrounds.We look forward to receiving your application.Job SummaryID: 427C73C219Department: Sécheron | Traction Power SystemsType: full time

Job Description An opportunity for an IT product service manager has arisen within Airbus Defence & Space in Getafe (Madrid) Are you ready to drive digital transformation in the aerospace sector? Digital is the core Information Technology (IT) business enabler and the strategic Digital Business Part

Job Description:A vacancy for a Flight Test Ground Station Frameworks and On-Premise Cloud Architect has arisen within Airbus Defence & Space in Getafe (Madrid, Spain). ¿Es usted el candidato adecuado para esta oportunidad? Asegúrese de leer la descripción completa a continuación. The successful applicant will join Flight Test Ground Station Department.RESPONSIBILITIESFlight Test Ground Station is the department responsible for the Ground HW and Ground and Onboard SW means required for perform the flight test activity. On addition is responsible for the IT Systems and general software in the Test Center Organization.One of the key activities to perform is develop software applications for Flight Test Ground Station and Test Frameworks. Additionally some industralization of tools are requested from the Test Center.We are seeking a highly skilled and experienced engineer to join our team as a Framework and On-Premise Cloud Solutions Engineer. In this role, you will be responsible for designing, implementing, and maintaining frameworks and on-premise cloud solutions for our clients. You will work closely with our clients to understand their specific needs and design custom solutions that meet their requirements.Key Responsibilities:Design and implement frameworks and on-premise cloud solutions for clients.Work with clients to understand their specific needs and requirements.Develop and maintain documentation for frameworks and on-premise cloud solutions.Troubleshoot and resolve issues with frameworks and on-premise cloud solutions.Collaborate with cross-functional teams to ensure that frameworks and on-premise cloud solutions are integrated seamlessly into clients' environments.SKILLSWe are looking for candidates with the following skills and experience:Bachelor's degree in Computer Science or a related fieldExperience in cloud computing, including experience as a cloud architect or similar roleStrong understanding of cloud architectures and design patternsProficiency with private cloud platform solutions based on Kubernetes.Experience with the following tools or similar- ArgoCD- Harbor- Nexus- Gitea- Haproxy- Prometheus- Keycloak- Velero- IcebergExperience with the following storage solutions:- Rook- Minio or other object storageExperience with the following databases deployed in Kubernetes with operators:- PSQL (cloudnative-pg)- Opensearch- ClickhouseExperience with continuous integration/continuous delivery (CI/CD) pipelines in JenkinsStrong communication and collaboration skillsWHICH BENEFITS WILL YOU HAVE AS AIRBUS EMPLOYEE?At Airbus we are focused on our employees and their welfare. Take a look at some of our social benefits:Vacation days plus additional days-off along the year.Attractive salary.Hybrid model of working when possible, promoting the work-life balance.Collective transport service subject to working calendar/home location.Benefits such as life insurance, health insurance, employee stock options, retirement plan, or study grants.On-site facilities (among others): free canteen, kindergarten, medical office.Possibility to collaborate in different social and corporate social responsibility initiatives.Excellent upskilling opportunities and great development prospects in a multicultural environment.Option to access special rates in products & benefits.#MYCYMThis job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth.Company:Airbus Defence and Space SAUEmployment Type:Permanent-------Experience Level:ProfessionalJob Family:Testing By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus.Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief.Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to Airbus, we support you to work, connect and collaborate more easily and flexibly. xiphteb Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.SummaryLocation: GetafeType: Full timePosted: 2026-10-23Country: SpainRequisition: JR10415092Posting ID: 870a4b6ac3721001e5341b800ba00000

Job Description:An opportunity for a PWP Mechanical Analysis Engineer has arisen within Airbus Defence and Space, Getafe (Madrid).The selected candidate will join the PWP Mechanical Analysis Team. Por favor, lea detenidamente la siguiente descripción del puesto para asegurarse de que encaja con el perfil antes de enviar su solicitud. Our department is in charge of participating in the design of the ADS platform PWP through modeling, loads evaluation (static, fatigue, dynamic, thermal), and structure/system definition and validation. We develop static, thermal, and dynamic models of the PWP structure design to integrate engines across our different platforms. The team evaluates structural stresses derived from loads, supporting the design from the pre-design phase to in-service support, including main design reviews, certification, and prototype testing.To perform these activities, our multidisciplinary team is permanently in contact with Flight Physics, Design, and System Integration departments, as well as each program's Chief Engineering office. The jobholder will reinforce our stress analysis area to support complex system implementation in these programs.ResponsibilitiesThe main tasks and deliverables of the jobholder will be:Perform static, fatigue, and damage tolerance (F&DT) calculation and analysis within metallic, composite, and hybrid structures at the component level.Develop structural stress evaluations and produce relevant strength margins or reserve factors according to validated and applicable Airbus methods and sizing processes.Utilize standard F&DT tools and techniques to analyze damaged structures and provide stress analyses for the repair or acceptance of components.Collaborate with Flight Physics, Design, and System Integration departments to ensure structural alignment from pre-design phases to in-service support.Support the definition, implementation, and validation of the PWP structure design, participating actively in main design reviews and certification processes.SkillsIs your profile aligned to the following list of skills? Apply! We are looking forward to knowing you:Education: Aeronautical or Industrial Engineering degree or a related discipline.Experience: At least 5 years of experience in Aeronautical Engineering Mechanical stress analysis.Soft skills: High adaptability to work in a team and networking mode. Capacity to endorse responsibility and leadership.Languages: Advanced level in English.Technical knowledge: Programming in Python, advanced level of NASTRAN and CATIA.Which benefits will you have as an Airbus employee?At Airbus we are focused on our employees and their welfare. Take a look at some of our social benefits:Vacation days plus additional days-off along the year.Attractive salary.Hybrid model of working when possible, promoting the work-life balance.Collective transport service in some sites.Benefits such as health insurance, employee stock options, retirement plan, or study grants.On-site facilities (among others): free canteen, kindergarten, medical office.Possibility to collaborate in different social and corporate social responsibility initiatives.Excellent upskilling opportunities and great development prospects in a multicultural environment.Special rates in products & benefits.This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth.Company:Airbus Defence and Space SAUEmployment Type:Permanent-------Experience Level:ProfessionalJob Family:Structure & Dynamic Systems Analysis By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus.Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief.Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to Airbus, we support you to work, connect and collaborate more easily and flexibly. xiphteb Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.SummaryLocation: Getafe AreaType: Full timePosted: 2026-10-15Country: SpainRequisition: JR10447766Posting ID: 958ea949ba7410443c6452a4e3310000

Airbus Defence and Space SAU in Getafe is seeking an Engineering Change Manager to lead configuration activities for the Military Aircraft Configuration Engineering department within the A400M programme. You will support modifications, documentation, certification, and PLM-related configuration management across ATAs, collaborating with design, systems analysis, and manufacturing teams. The role emphasizes leadership in change processes, interaction with stakeholders, and adoption of new #J-18808-Ljbffr

Additionally, will support the head of the function, jointly with other Data Integration Solution architects, on the strategical vision of new Data Integration & Interoperability layer at company level, to leverage the AI acceleration You will make the data fly inside Airbus Defence & Space and als

Airbus Defence and Space SAU is seeking an Engineering Change Manager in Getafe to lead configuration management for the Military Aircraft Configuration Engineering team. You will drive changes for the A400M programme and coordinate CM activities across design, systems analysis, manufacturing engineering, and program configuration. The role offers regular teleworking and requires proactive, innovative thinking. #J-18808-Ljbffr

Airbus Defence and Space Getafe (Madrid) seeks an Integrated Planner to lead the preparation and follow-up of high-level and detailed schedules for activities within Engineering. The role supports all planning tasks and acts as the scheduling focal point across programmes, operations and services. The candidate should be a recent Aeronautical or Industrial Engineering graduate with 1 year of engineering experience, strong English and Spanish, and excellent interpersonal and communication skills. #J-18808-Ljbffr

Airbus Defence and Space SAU in Getafe, Madrid, seeks an Airworthiness & Quality Engineer (Logistics/Procurement) to reinforce the Quality Logistics and Transport Team. Requirements include a bachelor’s in aerospace/industrial engineering, 5+ years in quality/logistics, English fluency, and strong

Airbus Defence and Space in Getafe is seeking a Data Engineer to design, implement and deploy data integration pipelines across diverse data sources. You will work within the TDDT Data Integration team under Data Management & AI, ensuring end-to-end accountability for solution deployments. You will contribute to data flows, quality checks, and the microservices/API-based architecture while supporting AI adoption and interoperability initiatives. Collaboration across teams is required. #J-18808-Ljbffr

Airbus Defence and Space SAU is seeking an Integrated Planner in Getafe (Madrid) to prepare and follow up high-level and detailed schedules within Engineering. You will support planning activities and act as a focal point for coordination with programmes, operations, and services. Ideal candidates are graduates in Aeronautical or Industrial Engineering with at least 1 year in engineering, strong English and Spanish, and a facility for adapting to new topics in a networked environment. #J-18808-Ljbffr

Overview As part of Integrated Planning (TADIP) you will shape workload and workforce planning across Airbus Defence and Space Getafe. You’ll integrate AI and ML tools into planning architectures, build and deploy engineering tools via CI/CD, and support top management with data-driven insights. You will work on cross-programme planning, performance analysis, and automation to improve security and efficiency. This role offers a unique chance to influence programme performance and resource balance in a multinational, innovative environment. You will collaborate with engineering leaders to drive transformation and scalable, modular solutions. Compensaciones / Beneficios • Vacation days and additional days off, • Competitive salary, • Hybrid working model, • Collective transport service, • Life and health insurance, • Employee stock options Responsabilidades, • Integrate and model AI tools within Planning department architecture, • Design, develop and deploy engineering tools following CI/CD principles, • Create modular, reusable code for tools and microservices, • Incorporate infrastructure into CI/CD pipelines for automated deployments, • Ensure workload data consistency, • Develop and deploy AI/ML tools to support MyWorkload+ and Bidplus, • Support workload planning exercises (OP, FC, EAC) for the engineering perimeter, • Improve development practices, performance, and security, • Support top management reports and tool generation Requisitos principales, • Education: Software Engineering degree or equivalent, • Experience: at least 5 years as Expert Net Architect, • Development with .NET Core; MVC/EF/LINQ; C#, JavaScript, HTML, • Database optimization/Administration (MySQL/MariaDB/Oracle/SQL Server), • Microservices development; SOAP/REST communications, • CI/CD knowledge (Git, Artifactory, Jenkins, SonarQ), • Agile/Scrum experience, • Linux and Windows server administration, • Analytical, data-handling skills; proactive and team-oriented, • Analytical thinking, • Proactive mindset, • Team spirit, • Machine learning & AI tools (n8n, qdrant, oLlama), • AI model integration, • .NET Core development

Overview As part of Integrated Planning (TADIP) you will shape workload and workforce planning across Airbus Defence and Space Getafe. You’ll integrate AI and ML tools into planning architectures, build and deploy engineering tools via CI/CD, and support top management with data-driven insights. You will work on cross-programme planning, performance analysis, and automation to improve security and efficiency. This role offers a unique chance to influence programme performance and resource balance in a multinational, innovative environment. You will collaborate with engineering leaders to drive transformation and scalable, modular solutions. Compensaciones / Beneficios • Vacation days and additional days off, • Competitive salary, • Hybrid working model, • Collective transport service, • Life and health insurance, • Employee stock options Responsabilidades, • Integrate and model AI tools within Planning department architecture, • Design, develop and deploy engineering tools following CI/CD principles, • Create modular, reusable code for tools and microservices, • Incorporate infrastructure into CI/CD pipelines for automated deployments, • Ensure workload data consistency, • Develop and deploy AI/ML tools to support MyWorkload+ and Bidplus, • Support workload planning exercises (OP, FC, EAC) for the engineering perimeter, • Improve development practices, performance, and security, • Support top management reports and tool generation Requisitos principales, • Education: Software Engineering degree or equivalent, • Experience: at least 5 years as Expert Net Architect, • Development with .NET Core; MVC/EF/LINQ; C#, JavaScript, HTML, • Database optimization/Administration (MySQL/MariaDB/Oracle/SQL Server), • Microservices development; SOAP/REST communications, • CI/CD knowledge (Git, Artifactory, Jenkins, SonarQ), • Agile/Scrum experience, • Linux and Windows server administration, • Analytical, data-handling skills; proactive and team-oriented, • Analytical thinking, • Proactive mindset, • Team spirit, • Machine learning & AI tools (n8n, qdrant, oLlama), • AI model integration, • .NET Core development

Overview As a Systems Integration Engineer in the Eurodrone Audio/Voice Communication System team, you lead design and integration for the end-to-end system, collaborating across disciplines and suppliers to deliver a compliant, verifiable solution. You work within a multidisciplinary environment to drive the V-cycle from requirements to certification, supporting integration, testing and airworthiness processes. This role offers exposure to complex military aircraft programmes and a chance to contribute to mission-critical communications in a European aerospace context. Compensaciones / Beneficios • Vacation days plus additional days-off, • Hybrid model of working, • Life insurance, • Health insurance, • Employee stock options, • On-site facilities Responsabilidades, • Lead Audio/Voice Communication System design and integration for Eurodrone, guiding feasibility and requirements allocation, • Develop and validate system specifications using RBE and MBSE, ensuring traceability through the V-cycle, • Coordinate technical interfaces with suppliers and customers; participate in design reviews and milestones, • Define and support system integration, verification, and validation activities; prepare test requirements and release analysis, • Support qualification, airworthiness and certification activities, including documentation for compliance with ICAO/FAA/EASA/EUROCONTROL, • Provide technical lifecycle support across Production, Services, Procurement and Technical Publications; assist at Final Assembly Line (FAL), • Occasional travel within Spain and Europe (up to ~10%) Requisitos principales, • Engineering degree or equivalent background; experience in Systems Engineering, System Design or Systems Integration, • Experience with Audio/Voice Communication Systems or full-chain Communication Systems; COMSEC valued, • Strong knowledge of systems engineering lifecycle and V-model; requirements definition, design, integration, verification, validation, qualification, airworthiness and certification, • Experience with RBE and MBSE; requirements management, • Knowledge of DOORS, CAMEO, ICDMS, CWE, MATLAB/Simulink, Stateflow; exposure to Agile tools (SCRUM, Jira, Confluence, DeMAT) considered an asset, • Strong English communication skills (B2/C1) and ability to work with international stakeholders, • Soft skills: teamwork, problem-solving, collaboration, adaptability, proactive attitude, • Valuable: Eurodrone or similar complex military aircraft programme experience; knowledge of Airbus DS procedures; CVE experience; digitalization in system design; Plateau methods, • Strong teamwork, • Problem-solving, • Collaborative mindset, • RBE, • MBSE, • Requirements management

Overview Senior R&D Power Electronics Engineer at Sécheron Hasler Group, a leader in railway electrical safety and traction systems. You will design and industrialize high-power AC/DC, DC-DC, and DC/AC converters and steer technical leadership in customer projects. The role focuses on specifying components, validating designs, and coordinating testing to meet demanding railway standards. You will work cross-functionally to deliver high-impact power conversion solutions that support renewable energy and industrial systems. Compensaciones / Beneficios • flat hierarchies, • direct communication between departments and management, • full responsibility for tasks, • initiative encouraged, • opportunities for personal and professional growth, • equal opportunity employer Responsabilidades, • Design and industrialize high-power converters (1-10MW, 500-1500Vdc) for AC/DC, DC-DC, DC/AC, • Model voltage source and line-commutated converters, • Specify components (IGBTs, cooling, magnetics) and design filters and power factor compensation, • Verify compliance with specifications and standards, • Coordinate protections, validation, and testing, • Prepare converter testing documentation, • Analyze customer specifications, • Prepare offers and perform cost calculations, • Provide technical leadership in customer projects and support project management Requisitos principales, • Master's Degree or above in Power Electronics Engineering, • Understanding of functional characteristics of Power Electronics and control for converters, • Knowledge in IGBT-based Voltage Source Converters (VSC), • Knowledge of Thyristor-based Line Commutation Converters (LCC), • Knowledge of simulation tools like MATLAB/SIMULINK, PSIM, • Positive attitude, initiative, proactiveness and enthusiasm for power electronics and renewable energy, • Demonstrable success in achieving customer milestones and exceeding quality expectations, • Good problem solving with minimal supervision and solution-building skills, • Good communication with team, peers, and management, • Good communication in Spanish and English, • positive attitude, • initiative, • proactiveness, • IGBT-based VSC, • Thyristor-based LCC, • MATLAB/SIMULINK

Overview As a Senior Aerodynamics Engineer in the Flight Physics team, you shape external air vehicle geometries and build aerodynamic databases that support performance, stability, and handling. You will lead CFD campaigns and participate in wind tunnel trials, ensuring safe separation analyses for external stores. You’ll develop and maintain cutting-edge aerodynamic methods and tools, collaborating with international experts across disciplines. This role offers high-impact challenges at the intersection of research, testing, and aircraft design, contributing to Airbus’ strategic goals. Compensaciones / Beneficios • Vacation days plus additional days-off, • Attractive salary, • Hybrid model of working, • Life insurance and health insurance, • Employee stock options, • Retirement plan Responsabilidades, • Shape external air vehicle geometries and build aerodynamic databases (loads, performance, stability, handling), • Drive CFD campaigns and participate in wind tunnel testing, • Perform safe separation analyses for external stores and complex maneuvers, • Develop and optimize aerodynamic methods, scripts (Python/Matlab), and roadmaps aligned with Airbus strategy, • Collaborate with international experts across Flight Physics, Structures, Flight Control, Loads, and Mass Properties, • Deliver high-impact aerodynamic solutions within TCQ constraints across the aircraft lifecycle Requisitos principales, • Master’s Degree in Aerospace / Aeronautical Engineering (or equivalent), • 5+ years of hands-on aerodynamics experience on military transport or combat aircraft (shape design, CFD, wind tunnel testing, or safe separation), • Knowledge of Flight Physics disciplines (Performance, Loads, Flight Mechanics) is highly valuable, • Advanced English (C1), • Strong foundation in aerodynamics, fluid mechanics, and flight mechanics, • Cross-functional collaboration in international teams, • Effective communication and problem-solving in multidisciplinary environments, • Proactive and goal-oriented mindset, • CFD, • wind tunnel testing, • Python

Overview As Thermo-Mechanical AIT ME, you enable and industrialize the Manufacturing System for spacecraft projects within Airbus Space Spain. You work in cross-functional projects to develop, integrate, test, and deliver thermo-mechanical and electrical hardware for spacecraft payloads. You’ll lead work preparation, define manufacturing processes, and ensure traceable, compliant MBOM and Dossier contents. This role offers interaction with engineering, production, and quality teams across a multinational space environment and a chance to influence end-to-end AIT execution. Compensaciones / Beneficios • Vacation days plus additional days-off, • Hybrid model of working when possible, • Health insurance, • Employee stock options, • Retirement plan, • Study grants Responsabilidades, • Confer with Engineering to confirm design feasibility within the industrial system, • Bring industrial expertise to multifunctional project teams, • Understand and maintain Manufacturing Dossier traceability (As Design-As Planned), • Assess and optimize manufacturing technologies within Space Spain Plant and partner networks, • Ensure feasibility of assembly, integration, and testing of thermal, mechanical, and electrical hardware, • Define MBOM and ensure material availability for Supply Chain, • Provide technical support to AIT managers and shopfloor teams during breadboard, qualification, and flight model activities, • Lead development of AIT work procedures and integrate them into Work Orders, • Coordinate with Quality to incorporate control plans and PFMEA inputs, • Support scheduling, resource optimization, and budget/input for cost improvements, • Promote continuous improvement through lessons learned and PPS, • Contribute to qualification campaigns and deployment of new processes or materials, • Assist on-site during campaigns or supplier facilities when needed, • Foster cross-functional feedback loops and on-site coaching Requisitos principales, • Aerospace, Telecommunications, Industrial or Mechanical Engineering background, • 3 to 5 years of experience in AIT (Assembly, Integration and Test) production, • Knowledge of ESA ECSS standards (nice to have), • Knowledge of CATIA (nice to have), • Knowledge of DDMS environment (Delmia, Apriso, etc) (nice to have), • Fluent in English and Spanish, • Cross-functional collaboration, • Problem solving, • Proactive planning, • AIT in Space projects, • Manufacturing Dossier and MBOM definition, • Process/work instruction development

Overview In this role you will lead aerodynamic design and modelling for Airbus Defence & Space aircraft, delivering robust aerodynamic data and models to support performance, handling qualities and loads. You will work within Flight Physics in a multidisciplinary environment, liaising with partners to meet program requirements. You will advance numerical and experimental prediction tools, contribute to wind tunnel campaigns, and connect with external research to drive optimisation and technology development. This is an impactful opportunity to shape external shapes and aerodynamics for diverse aircraft programs. Compensaciones / Beneficios • flexible working arrangements, • diversity and inclusion commitment, • permanent contract, • full-time role Responsabilidades, • Design external air vehicle shapes and provide comprehensive aerodynamic models and data for performance, handling qualities and loads in steady and unsteady regimes, • Deliver optimised aerodynamic solutions and data to customers within time, cost, and quality constraints, • Develop and maintain technologies, methods, tools, and competencies across Aerodynamics to support programmes lifecycle, • Contribute to achievement of vehicle project aerodynamic and flight performance requirements within time, cost, and quality targets, • Develop expertise in numerical and experimental aerodynamic prediction tools, • Advance aerodynamic technologies in line with Company Strategy, • Engage with external research community in Aerodynamics and multidisciplinary air vehicle design, • Collaborate with related disciplines (structures, loads, stability & control, mass properties) to support integrated design, • Link with international partners and multidisciplinary teams to ensure alignment with program goals Requisitos principales, • Master’s degree in Aerospace Engineering (PhD level valuable), • At least 5 years of experience in aerodynamic design and characterisation, • Strong experience in meshing and numerical aerodynamic prediction tools, • Strong experience in generating aerodynamic databases from experimental and CFD data, • Strong experience in CAD tools, • Knowledge/experience in wind tunnel testing (valuable), • Knowledge/experience in safe separation (valuable), • Knowledge/experience in Python and Matlab (valuable), • English advanced; German and/or French valuable, • Meshing and numerical aerodynamic prediction tools, • Generation of aerodynamic databases from experimental and CFD data, • CAD tools, • Wind tunnel testing, • Safe separation knowledge, • Python

Overview As a Senior Aerodynamics Engineer in the Flight Physics team, you shape external air vehicle geometries and build aerodynamic databases that support performance, stability, and handling. You will lead CFD campaigns and participate in wind tunnel trials, ensuring safe separation analyses for external stores. You’ll develop and maintain cutting-edge aerodynamic methods and tools, collaborating with international experts across disciplines. This role offers high-impact challenges at the intersection of research, testing, and aircraft design, contributing to Airbus’ strategic goals. Compensaciones / Beneficios • Vacation days plus additional days-off, • Attractive salary, • Hybrid model of working, • Life insurance and health insurance, • Employee stock options, • Retirement plan Responsabilidades, • Shape external air vehicle geometries and build aerodynamic databases (loads, performance, stability, handling), • Drive CFD campaigns and participate in wind tunnel testing, • Perform safe separation analyses for external stores and complex maneuvers, • Develop and optimize aerodynamic methods, scripts (Python/Matlab), and roadmaps aligned with Airbus strategy, • Collaborate with international experts across Flight Physics, Structures, Flight Control, Loads, and Mass Properties, • Deliver high-impact aerodynamic solutions within TCQ constraints across the aircraft lifecycle Requisitos principales, • Master’s Degree in Aerospace / Aeronautical Engineering (or equivalent), • 5+ years of hands-on aerodynamics experience on military transport or combat aircraft (shape design, CFD, wind tunnel testing, or safe separation), • Knowledge of Flight Physics disciplines (Performance, Loads, Flight Mechanics) is highly valuable, • Advanced English (C1), • Strong foundation in aerodynamics, fluid mechanics, and flight mechanics, • Cross-functional collaboration in international teams, • Effective communication and problem-solving in multidisciplinary environments, • Proactive and goal-oriented mindset, • CFD, • wind tunnel testing, • Python

Overview As a Tactical Communications Lab Test Engineer, you will support the Flight & Integration Test Centre to validate complex communication systems across major Airbus programs. You’ll design rig tests, prepare data and scenarios, execute validation activities, and analyze results to drive reliable system performance. You will work in a multidisciplinary team, handling fault investigations and tool qualification to ensure robust mission-critical communications. This role combines hands-on testing with data-driven problem solving in a dynamic defense environment. Compensaciones / Beneficios • Vacation days and additional days-off, • Hybrid model of working when possible, • Life insurance and health insurance, • Employee stock options, • Retirement plan, • On-site facilities Responsabilidades, • Design and specify coherent rig test cases and procedures from technical documentation for rigs and validation environments, • Prepare pre-test data, including simulation requirements, test scripts, initialization files, and tactical scenarios, • Execute test steps in virtual, subsystem rig, and global system integration rigs; support on-aircraft ground and flight testing, • Assess system behavior, analyze results, and produce comprehensive test reports, • Identify and manage equipment and system problem reports throughout their lifecycle, • Manage lifecycle tools (DOORS, Octane, FTNet) and specify/qualify custom test tools (decoding, emulation, automation) Requisitos principales, • 2 to 6 years of system testing experience in Tactical/Mission/Safety Communication systems or similar, • Deep knowledge of COMMS Systems Under Test (Link 16/22/VMF, SATCOM, V/UHF Radios, Comm Servers) and related test tools, • Hands-on experience with lab equipment and simulators (e.g., 1553 Databus Analysers, TIGER, MIGATO, LEGS, AIDASS, LabView), • Requirements interpretation, test scripting, and systems behavior assessment, • Advanced level in English and Spanish (written and spoken), • Active NATO security clearance (or eligibility) and ITAR/National Export Control eligibility, • Proactive problem solver, • Open-minded, • Team player, • COMMS Systems Under Test (Tactical Datalinks, Link 16/22/VMF, SATCOM, V/UHF Radios, Comm Servers), • Lab equipment and simulators (e.g., 1553 Databus Analysers, TIGER, MIGATO, LEGS, AIDASS, LabView), • Test scripting and data analysis

Overview As a Mass Properties Engineer in Flight Physics, you will define and drive mass targets for new and in-service aircraft, developing accurate mass models and supporting weight control throughout life cycles. You will collaborate with cross-functional disciplines to optimize vehicle mass and enable reliable deliveries. Your work will influence design reviews, weight maturity, and risk/r opportunities while supporting program decisions. This role offers international collaboration and exposure to advanced mass properties programs. Compensaciones / Beneficios • Vacation days plus additional days-off, • Attractive salary, • Hybrid model of working, • Life insurance, • Health insurance, • Employee stock options Responsabilidades, • Define mass status, target mass and plan to reach target, • Develop mass models for loads analyses and deliver weight control insights, • Support mass estimation, calculations, weighing validation and mass reporting through vehicle life, • Collaborate across disciplines to challenge designs for optimum mass, • Perform trade studies, benchmarking and competitors' analyses, • Contribute to vehicle optimization and decision support for Chief Engineering and Programs, • Participate in design reviews, weight maturity reviews and weight risk/opportunity tracking, • Support in marketing activities for Customer Guarantees and vehicle deliveries, • Develop capabilities (R&T, M&T) and processes to improve Time/Quality/Cost delivery, • Contribute to cross-country mass properties competence development in Spain and Germany Requisitos principales, • Degree in Aeronautical Engineering, • 0-5 years of experience; Flight Physics or Structural Design and Mass Properties experience valued, • Advanced English; German would be valuable, • Strong communication and collaboration skills; able to work independently, • Keen to work in an open, trusting environment and adapt to new ways of working, • Interest in engineering topics at aircraft system level and empowerment mindset, • Agile mindset, • strong communication, • independence/autonomy, • Mass properties modelling and calculations, • Weight estimation and control, • Loads analyses

Overview As a Human Factors Test Engineer within the Integration Test & Analysis Team at the Flight & Integration Test Centre, you will advance avionics and mission-systems evaluation across simulators, ground rigs, and flight campaigns. You will plan and execute HF test campaigns, align with V&V strategies, and support certification activities. Your work enables robust, safety-focused testing across platforms like A330 MRTT, A400M, C295, Eurodrone, and FCAS/NGF, with cross-functional collaboration and international travel. Compensaciones / Beneficios • Vacation days, • Hybrid working model, • Life insurance, • Health insurance, • Employee stock options, • Retirement plan Responsabilidades, • Plan and execute Human Factors test campaigns across simulators, rigs, and flight tests, • Coordinate cross-program Verification & Validation strategies and milestones, • Support flight testing by preparing orders, monitoring telemetry, and data reduction, • Draft Certification Cards, test plans, and Qualification/Certification Test Reports with Design Offices and Authorities, • Analyze system limitations, author snag reports, and justify design changes, • Enhance data analysis workflows and test methodologies from a Human Factors/ergonomics perspective across programs Requisitos principales, • At least 5 years of experience in Human Factors testing within systems integration environments (simulators, rigs, or aircraft), • Strong understanding of Workload, Situational Awareness, HMI, Usability, Ergonomics, • Experience with test scales (NASA TLX, Bedford, ISA) and certification processes (COHDA, FAHDA), • Advanced English and Spanish; willingness to travel domestically and internationally to test sites, • High adaptability in multidisciplinary environments, • Proactive problem-solving mindset, • Strong coordination abilities, • Core Human Factors concepts (workload, situational awareness, HMI, usability, ergonomics), • HF testing in simulators and real aircraft environments, • Experience with HF data analysis and workflow optimization

Overview In this role you apply Human Factors Engineering to design user-centered workstations and HMIs for military air platforms. You collaborate across life-cycle stages to ensure usable, safe interfaces for cockpits, flight decks, and mission consoles. You contribute to ergonomic, cognitive, and environmental criteria to minimize workload and human error. The position centers on prototyping, validation, and certification activities that support safe operation and mission effectiveness. Compensaciones / Beneficios • flexible working arrangements, • inclusive working environment, • equal opportunities, • diversity and inclusion, • opportunities for career development Responsabilidades, • Design and specify geometry, layout and furnishing of workstations, • Develop HMI concepts including multimodal interactions and displays, • Apply end-to-end HFE processes from concept through service, • Perform mission, task, ergonomic, workload and human error analyses, • Create HMI prototypes (HW and SW) using virtual models, simulations and physical mock-ups, • Lead Human Factors verification and validation activities and support certification Requisitos principales, • communication, • teamwork, • problem-solving, • Human Factors Engineering, • HMI design and multimodal interaction, • ergonomics analysis

Overview As a Systems Integration Engineer in the Eurodrone Audio/Voice Communication System team, you lead design and integration for the end-to-end system, collaborating across disciplines and suppliers to deliver a compliant, verifiable solution. You work within a multidisciplinary environment to drive the V-cycle from requirements to certification, supporting integration, testing and airworthiness processes. This role offers exposure to complex military aircraft programmes and a chance to contribute to mission-critical communications in a European aerospace context. Compensaciones / Beneficios • Vacation days plus additional days-off, • Hybrid model of working, • Life insurance, • Health insurance, • Employee stock options, • On-site facilities Responsabilidades, • Lead Audio/Voice Communication System design and integration for Eurodrone, guiding feasibility and requirements allocation, • Develop and validate system specifications using RBE and MBSE, ensuring traceability through the V-cycle, • Coordinate technical interfaces with suppliers and customers; participate in design reviews and milestones, • Define and support system integration, verification, and validation activities; prepare test requirements and release analysis, • Support qualification, airworthiness and certification activities, including documentation for compliance with ICAO/FAA/EASA/EUROCONTROL, • Provide technical lifecycle support across Production, Services, Procurement and Technical Publications; assist at Final Assembly Line (FAL), • Occasional travel within Spain and Europe (up to ~10%) Requisitos principales, • Engineering degree or equivalent background; experience in Systems Engineering, System Design or Systems Integration, • Experience with Audio/Voice Communication Systems or full-chain Communication Systems; COMSEC valued, • Strong knowledge of systems engineering lifecycle and V-model; requirements definition, design, integration, verification, validation, qualification, airworthiness and certification, • Experience with RBE and MBSE; requirements management, • Knowledge of DOORS, CAMEO, ICDMS, CWE, MATLAB/Simulink, Stateflow; exposure to Agile tools (SCRUM, Jira, Confluence, DeMAT) considered an asset, • Strong English communication skills (B2/C1) and ability to work with international stakeholders, • Soft skills: teamwork, problem-solving, collaboration, adaptability, proactive attitude, • Valuable: Eurodrone or similar complex military aircraft programme experience; knowledge of Airbus DS procedures; CVE experience; digitalization in system design; Plateau methods, • Strong teamwork, • Problem-solving, • Collaborative mindset, • RBE, • MBSE, • Requirements management

Overview In this role you apply Human Factors Engineering to design user-centered workstations and HMIs for military air platforms. You collaborate across life-cycle stages to ensure usable, safe interfaces for cockpits, flight decks, and mission consoles. You contribute to ergonomic, cognitive, and environmental criteria to minimize workload and human error. The position centers on prototyping, validation, and certification activities that support safe operation and mission effectiveness. Compensaciones / Beneficios • flexible working arrangements, • inclusive working environment, • equal opportunities, • diversity and inclusion, • opportunities for career development Responsabilidades, • Design and specify geometry, layout and furnishing of workstations, • Develop HMI concepts including multimodal interactions and displays, • Apply end-to-end HFE processes from concept through service, • Perform mission, task, ergonomic, workload and human error analyses, • Create HMI prototypes (HW and SW) using virtual models, simulations and physical mock-ups, • Lead Human Factors verification and validation activities and support certification Requisitos principales, • communication, • teamwork, • problem-solving, • Human Factors Engineering, • HMI design and multimodal interaction, • ergonomics analysis

Overview As a Mass Properties Engineer in Flight Physics, you will define and drive mass targets for new and in-service aircraft, developing accurate mass models and supporting weight control throughout life cycles. You will collaborate with cross-functional disciplines to optimize vehicle mass and enable reliable deliveries. Your work will influence design reviews, weight maturity, and risk/r opportunities while supporting program decisions. This role offers international collaboration and exposure to advanced mass properties programs. Compensaciones / Beneficios • Vacation days plus additional days-off, • Attractive salary, • Hybrid model of working, • Life insurance, • Health insurance, • Employee stock options Responsabilidades, • Define mass status, target mass and plan to reach target, • Develop mass models for loads analyses and deliver weight control insights, • Support mass estimation, calculations, weighing validation and mass reporting through vehicle life, • Collaborate across disciplines to challenge designs for optimum mass, • Perform trade studies, benchmarking and competitors' analyses, • Contribute to vehicle optimization and decision support for Chief Engineering and Programs, • Participate in design reviews, weight maturity reviews and weight risk/opportunity tracking, • Support in marketing activities for Customer Guarantees and vehicle deliveries, • Develop capabilities (R&T, M&T) and processes to improve Time/Quality/Cost delivery, • Contribute to cross-country mass properties competence development in Spain and Germany Requisitos principales, • Degree in Aeronautical Engineering, • 0-5 years of experience; Flight Physics or Structural Design and Mass Properties experience valued, • Advanced English; German would be valuable, • Strong communication and collaboration skills; able to work independently, • Keen to work in an open, trusting environment and adapt to new ways of working, • Interest in engineering topics at aircraft system level and empowerment mindset, • Agile mindset, • strong communication, • independence/autonomy, • Mass properties modelling and calculations, • Weight estimation and control, • Loads analyses

Overview As a GSE Engineer, you will design, validate and support ground support equipment for Airbus aircraft, with a primary focus on the Eurofighter program and involvement in other combat platforms. You will work within the TAS Services organization in TASSE6, collaborating with suppliers and customers to ensure equipment readiness and compatibility. You’ll manage specifications, manufacturing follow-up, and on-aircraft validation, while supporting installations at customer sites. Your role combines technical rigor with cross-functional and multinational teamwork to enable daily aircraft operations. Compensaciones / Beneficios • Vacation days plus extra days off, • Hybrid working when possible, • Life insurance, • Health insurance, • Employee stock options, • Development opportunities Responsabilidades, • Prepare GSE Technical Specifications, • Provide technical support for supplier selection, • Follow-up on design and prototype manufacturing, • Validate equipment on the aircraft and conduct qualification/compatibility tests, • Prepare recommendations for customers and conduct site surveys, • Provide technical assistance to customers and support installation/commissioning at customer MOB, • Analyze aircraft modifications and their impact on developed GSEs Requisitos principales, • Fluent English and Spanish (oral, written), • Strong teamwork and open mindset, • Good verbal and written communication skills, • Flexibility to travel and work in multinational teams, • Creativity to develop new ideas, • team collaboration, • effective communication, • adaptability, • GSE technical specifications, • design follow-up and validation, • prototype manufacturing follow-up

Overview As a Mass Properties Engineer in Flight Physics, you will define and drive mass targets for new and in-service aircraft, developing accurate mass models and supporting weight control throughout life cycles. You will collaborate with cross-functional disciplines to optimize vehicle mass and enable reliable deliveries. Your work will influence design reviews, weight maturity, and risk/r opportunities while supporting program decisions. This role offers international collaboration and exposure to advanced mass properties programs. Compensaciones / Beneficios • Vacation days plus additional days-off, • Attractive salary, • Hybrid model of working, • Life insurance, • Health insurance, • Employee stock options Responsabilidades, • Define mass status, target mass and plan to reach target, • Develop mass models for loads analyses and deliver weight control insights, • Support mass estimation, calculations, weighing validation and mass reporting through vehicle life, • Collaborate across disciplines to challenge designs for optimum mass, • Perform trade studies, benchmarking and competitors' analyses, • Contribute to vehicle optimization and decision support for Chief Engineering and Programs, • Participate in design reviews, weight maturity reviews and weight risk/opportunity tracking, • Support in marketing activities for Customer Guarantees and vehicle deliveries, • Develop capabilities (R&T, M&T) and processes to improve Time/Quality/Cost delivery, • Contribute to cross-country mass properties competence development in Spain and Germany Requisitos principales, • Degree in Aeronautical Engineering, • 0-5 years of experience; Flight Physics or Structural Design and Mass Properties experience valued, • Advanced English; German would be valuable, • Strong communication and collaboration skills; able to work independently, • Keen to work in an open, trusting environment and adapt to new ways of working, • Interest in engineering topics at aircraft system level and empowerment mindset, • Agile mindset, • strong communication, • independence/autonomy, • Mass properties modelling and calculations, • Weight estimation and control, • Loads analyses

Overview As a Human Factors Test Engineer within the Integration Test & Analysis Team at the Flight & Integration Test Centre, you will advance avionics and mission-systems evaluation across simulators, ground rigs, and flight campaigns. You will plan and execute HF test campaigns, align with V&V strategies, and support certification activities. Your work enables robust, safety-focused testing across platforms like A330 MRTT, A400M, C295, Eurodrone, and FCAS/NGF, with cross-functional collaboration and international travel. Compensaciones / Beneficios • Vacation days, • Hybrid working model, • Life insurance, • Health insurance, • Employee stock options, • Retirement plan Responsabilidades, • Plan and execute Human Factors test campaigns across simulators, rigs, and flight tests, • Coordinate cross-program Verification & Validation strategies and milestones, • Support flight testing by preparing orders, monitoring telemetry, and data reduction, • Draft Certification Cards, test plans, and Qualification/Certification Test Reports with Design Offices and Authorities, • Analyze system limitations, author snag reports, and justify design changes, • Enhance data analysis workflows and test methodologies from a Human Factors/ergonomics perspective across programs Requisitos principales, • At least 5 years of experience in Human Factors testing within systems integration environments (simulators, rigs, or aircraft), • Strong understanding of Workload, Situational Awareness, HMI, Usability, Ergonomics, • Experience with test scales (NASA TLX, Bedford, ISA) and certification processes (COHDA, FAHDA), • Advanced English and Spanish; willingness to travel domestically and internationally to test sites, • High adaptability in multidisciplinary environments, • Proactive problem-solving mindset, • Strong coordination abilities, • Core Human Factors concepts (workload, situational awareness, HMI, usability, ergonomics), • HF testing in simulators and real aircraft environments, • Experience with HF data analysis and workflow optimization

Overview In this role you will perform structural analysis across design phases to ensure integrity and damage tolerance of airframe components. You will work within the Structural Stress Analysis Team to evaluate designs, sizing, and certification needs, influencing material choices and manufacturing processes. You will engage in cross-functional activities and support certification efforts, tests, and technology development. This is an opportunity to contribute to aerospace structures in a multidisciplinary, engineering-driven environment at Airbus Defence and Space. Compensaciones / Beneficios • Vacation days plus additional days-off, • Hybrid model of working when possible, • Health insurance, • Life insurance, • Employee stock options, • Development prospects Responsabilidades, • Perform structural analysis across design stages including conceptual, development, and modifications, • Conduct trade-off analyses for design solutions, • Define and evaluate structural arrangements; size components and assemblies, • Support Mechanical System installation design and certification requirements, • Assess certification rules and standards; define structural arrangements and manufacturing considerations, • Lead test definition, support, and result assessment; establish qualification means of compliance, • Contribute to technology development in engineering and manufacturing; engage in cross-disciplinary program management Requisitos principales, • University Aeronautical Engineering Degree or equivalent, • 5–10 years of experience in structural analysis of airframe components, • Experience with stress tools (FEM and SW packages), • Knowledge of standard stress methods (HSB, Bruhn, ESDU, Roark & Young), • Understanding of design principles, manufacturing processes, and AW requirements (military standards preferred), • Knowledge of qualification/certification of aircraft structures and aircraft development processes, • Metallic and composite materials knowledge; structural test techniques, • Good interpersonal and communication skills; fluent English; program management experience, • clear communication, • team collaboration, • problem solving, • FEM, • SW packages (stress analysis tools), • standard stress methods

Overview In this role you will perform structural analysis across design phases to ensure integrity and damage tolerance of airframe components. You will work within the Structural Stress Analysis Team to evaluate designs, sizing, and certification needs, influencing material choices and manufacturing processes. You will engage in cross-functional activities and support certification efforts, tests, and technology development. This is an opportunity to contribute to aerospace structures in a multidisciplinary, engineering-driven environment at Airbus Defence and Space. Compensaciones / Beneficios • Vacation days plus additional days-off, • Hybrid model of working when possible, • Health insurance, • Life insurance, • Employee stock options, • Development prospects Responsabilidades, • Perform structural analysis across design stages including conceptual, development, and modifications, • Conduct trade-off analyses for design solutions, • Define and evaluate structural arrangements; size components and assemblies, • Support Mechanical System installation design and certification requirements, • Assess certification rules and standards; define structural arrangements and manufacturing considerations, • Lead test definition, support, and result assessment; establish qualification means of compliance, • Contribute to technology development in engineering and manufacturing; engage in cross-disciplinary program management Requisitos principales, • University Aeronautical Engineering Degree or equivalent, • 5–10 years of experience in structural analysis of airframe components, • Experience with stress tools (FEM and SW packages), • Knowledge of standard stress methods (HSB, Bruhn, ESDU, Roark & Young), • Understanding of design principles, manufacturing processes, and AW requirements (military standards preferred), • Knowledge of qualification/certification of aircraft structures and aircraft development processes, • Metallic and composite materials knowledge; structural test techniques, • Good interpersonal and communication skills; fluent English; program management experience, • clear communication, • team collaboration, • problem solving, • FEM, • SW packages (stress analysis tools), • standard stress methods

Overview In this role you will support the full system development life-cycle within a multi-platform environment, focusing on environmental qualification and compliance. You will work within the Engineering Support team of the Systems Center of Competence to ensure safety, airworthiness, and proper integration across programs. You’ll manage interfaces and coordinate qualification campaigns, delivering validated solutions that meet program milestones. This is a dynamic role offering exposure to diverse systems and cross-functional collaboration, with a clear focus on impact and engineering excellence. Compensaciones / Beneficios • Vacation days plus additional days-off, • Hybrid model of working, • Life insurance, • Health insurance, • Employee stock options, • Retirement plan Responsabilidades, • Support the full system development life-cycle from requirements to qualification and delivery in a multi-platform environment, • Define Environmental Qualification requirements and tests, and review results, • Define interfaces between functions or systems and ensure consistent implementation, • Contribute to checkpoints and reviews with maturity expectations aligned to program phases, • Support Environmental Qualification campaigns and verify that requirements are implemented, • Ensure product design aligns with state-of-the-art safety standards and airworthiness regulations, • Support production, reception flight testing, and delivery Requisitos principales, • Degree in Engineering, • >5 years experience in System Development, • >2 years experience in Environmental Qualification activities, • Flexibility to adapt to different tasks/environments, • English professional level, • Awareness of compliance risks and integrity discipline, • Flexibility/adaptability, • Stakeholder management, • Cross-functional collaboration, • Environmental Qualification activities, • System development lifecycle, • Requirement analysis and verification

Overview As Thermo-Mechanical AIT ME, you enable and industrialize the Manufacturing System for spacecraft projects within Airbus Space Spain. You work in cross-functional projects to develop, integrate, test, and deliver thermo-mechanical and electrical hardware for spacecraft payloads. You’ll lead work preparation, define manufacturing processes, and ensure traceable, compliant MBOM and Dossier contents. This role offers interaction with engineering, production, and quality teams across a multinational space environment and a chance to influence end-to-end AIT execution. Compensaciones / Beneficios • Vacation days plus additional days-off, • Hybrid model of working when possible, • Health insurance, • Employee stock options, • Retirement plan, • Study grants Responsabilidades, • Confer with Engineering to confirm design feasibility within the industrial system, • Bring industrial expertise to multifunctional project teams, • Understand and maintain Manufacturing Dossier traceability (As Design-As Planned), • Assess and optimize manufacturing technologies within Space Spain Plant and partner networks, • Ensure feasibility of assembly, integration, and testing of thermal, mechanical, and electrical hardware, • Define MBOM and ensure material availability for Supply Chain, • Provide technical support to AIT managers and shopfloor teams during breadboard, qualification, and flight model activities, • Lead development of AIT work procedures and integrate them into Work Orders, • Coordinate with Quality to incorporate control plans and PFMEA inputs, • Support scheduling, resource optimization, and budget/input for cost improvements, • Promote continuous improvement through lessons learned and PPS, • Contribute to qualification campaigns and deployment of new processes or materials, • Assist on-site during campaigns or supplier facilities when needed, • Foster cross-functional feedback loops and on-site coaching Requisitos principales, • Aerospace, Telecommunications, Industrial or Mechanical Engineering background, • 3 to 5 years of experience in AIT (Assembly, Integration and Test) production, • Knowledge of ESA ECSS standards (nice to have), • Knowledge of CATIA (nice to have), • Knowledge of DDMS environment (Delmia, Apriso, etc) (nice to have), • Fluent in English and Spanish, • Cross-functional collaboration, • Problem solving, • Proactive planning, • AIT in Space projects, • Manufacturing Dossier and MBOM definition, • Process/work instruction development

Overview As a Framework and On-Premise Cloud Solutions Engineer in the Flight Test Ground Station team, you design, implement, and maintain on-premise cloud and framework solutions for flight test environments. You will collaborate with clients to capture needs and deliver robust, integrated software foundations that support ground systems and test activities. This role offers hands-on architectural work with Kubernetes-based private clouds, driving reliable deployments and scalable tooling. You will work across cross-functional teams to ensure seamless adoption and ongoing support. Compensaciones / Beneficios • Vacation days plus additional days-off, • Hybrid model of working, • Life insurance, • Health insurance, • Employee stock options, • Upskilling opportunities Responsabilidades, • Design and implement frameworks and on-premise cloud solutions for clients, • Understand client needs and translate into technical requirements, • Develop and maintain documentation for frameworks and on-premise cloud solutions, • Troubleshoot and resolve issues with frameworks and on-premise cloud solutions, • Collaborate with cross-functional teams to ensure integration into client environments Requisitos principales, • Bachelor's degree in Computer Science or related field, • Experience in cloud computing with cloud architect or similar role, • Strong understanding of cloud architectures and design patterns, • Proficiency with private cloud platform solutions based on Kubernetes, • Experience with ArgoCD, Harbor, Nexus, Gitea, Haproxy, Prometheus, Keycloak, Velero, Iceberg, • Storage experience with Rook, Minio or other object storage, • Databases in Kubernetes with operators: PSQL (cloudnative-pg), Opensearch, Clickhouse, • CI/CD experience with Jenkins, • Strong communication and collaboration skills, • strong communication, • collaboration, • problem-solving, • Kubernetes, • ArgoCD, • Harbor

Overview In this role you apply Human Factors Engineering to design user-centered workstations and HMIs for military air platforms. You collaborate across life-cycle stages to ensure usable, safe interfaces for cockpits, flight decks, and mission consoles. You contribute to ergonomic, cognitive, and environmental criteria to minimize workload and human error. The position centers on prototyping, validation, and certification activities that support safe operation and mission effectiveness. Compensaciones / Beneficios • flexible working arrangements, • inclusive working environment, • equal opportunities, • diversity and inclusion, • opportunities for career development Responsabilidades, • Design and specify geometry, layout and furnishing of workstations, • Develop HMI concepts including multimodal interactions and displays, • Apply end-to-end HFE processes from concept through service, • Perform mission, task, ergonomic, workload and human error analyses, • Create HMI prototypes (HW and SW) using virtual models, simulations and physical mock-ups, • Lead Human Factors verification and validation activities and support certification Requisitos principales, • communication, • teamwork, • problem-solving, • Human Factors Engineering, • HMI design and multimodal interaction, • ergonomics analysis

Overview In this role you will lead aerodynamic design and modelling for Airbus Defence & Space aircraft, delivering robust aerodynamic data and models to support performance, handling qualities and loads. You will work within Flight Physics in a multidisciplinary environment, liaising with partners to meet program requirements. You will advance numerical and experimental prediction tools, contribute to wind tunnel campaigns, and connect with external research to drive optimisation and technology development. This is an impactful opportunity to shape external shapes and aerodynamics for diverse aircraft programs. Compensaciones / Beneficios • flexible working arrangements, • diversity and inclusion commitment, • permanent contract, • full-time role Responsabilidades, • Design external air vehicle shapes and provide comprehensive aerodynamic models and data for performance, handling qualities and loads in steady and unsteady regimes, • Deliver optimised aerodynamic solutions and data to customers within time, cost, and quality constraints, • Develop and maintain technologies, methods, tools, and competencies across Aerodynamics to support programmes lifecycle, • Contribute to achievement of vehicle project aerodynamic and flight performance requirements within time, cost, and quality targets, • Develop expertise in numerical and experimental aerodynamic prediction tools, • Advance aerodynamic technologies in line with Company Strategy, • Engage with external research community in Aerodynamics and multidisciplinary air vehicle design, • Collaborate with related disciplines (structures, loads, stability & control, mass properties) to support integrated design, • Link with international partners and multidisciplinary teams to ensure alignment with program goals Requisitos principales, • Master’s degree in Aerospace Engineering (PhD level valuable), • At least 5 years of experience in aerodynamic design and characterisation, • Strong experience in meshing and numerical aerodynamic prediction tools, • Strong experience in generating aerodynamic databases from experimental and CFD data, • Strong experience in CAD tools, • Knowledge/experience in wind tunnel testing (valuable), • Knowledge/experience in safe separation (valuable), • Knowledge/experience in Python and Matlab (valuable), • English advanced; German and/or French valuable, • Meshing and numerical aerodynamic prediction tools, • Generation of aerodynamic databases from experimental and CFD data, • CAD tools, • Wind tunnel testing, • Safe separation knowledge, • Python

Overview As a GSE Engineer, you will design, validate and support ground support equipment for Airbus aircraft, with a primary focus on the Eurofighter program and involvement in other combat platforms. You will work within the TAS Services organization in TASSE6, collaborating with suppliers and customers to ensure equipment readiness and compatibility. You’ll manage specifications, manufacturing follow-up, and on-aircraft validation, while supporting installations at customer sites. Your role combines technical rigor with cross-functional and multinational teamwork to enable daily aircraft operations. Compensaciones / Beneficios • Vacation days plus extra days off, • Hybrid working when possible, • Life insurance, • Health insurance, • Employee stock options, • Development opportunities Responsabilidades, • Prepare GSE Technical Specifications, • Provide technical support for supplier selection, • Follow-up on design and prototype manufacturing, • Validate equipment on the aircraft and conduct qualification/compatibility tests, • Prepare recommendations for customers and conduct site surveys, • Provide technical assistance to customers and support installation/commissioning at customer MOB, • Analyze aircraft modifications and their impact on developed GSEs Requisitos principales, • Fluent English and Spanish (oral, written), • Strong teamwork and open mindset, • Good verbal and written communication skills, • Flexibility to travel and work in multinational teams, • Creativity to develop new ideas, • team collaboration, • effective communication, • adaptability, • GSE technical specifications, • design follow-up and validation, • prototype manufacturing follow-up

Overview As Electrical Design Engineer, you will translate client specs into robust electrical solutions for control and power systems in railway environments. You will collaborate with cross-functional teams to design wiring and functional diagrams for electrical cabinets and DC traction substations, providing technical support to project managers. This role combines CAD-driven design with automation and logic knowledge to deliver reliable rail equipment. You will contribute to challenging projects that shape safe, efficient traction systems and renewable energy applications, within a team that values initiative and growth. Compensaciones / Beneficios • flat hierarchies, • direct communication between departments and management, • employee empowerment and initiative, • opportunities for personal and professional growth, • equal opportunity employer Responsabilidades, • Participate in technical discussions on projects, • Study client specifications and prepare solutions for functional and detailed diagrams, • Prepare functional logic diagrams, • Design and draw wiring diagrams for electrical cabinets, • Provide technical support to the project manager, • Design and draw wiring diagrams for DC traction substations Requisitos principales, • Technical degree in electrical and automation industrial field or equivalent, • CAD design proficiency (Schemelect, Eplan, SEE Electrical Expert, AutoCAD Electrical), • Knowledge of automation and functional logic, • Railway experience is a plus, • Knowledge of electrical distribution and protection systems, • Experience producing electrical diagrams of systems, • English level B2 or higher, • Occasional travel (few days every 2 months), • Team player, autonomous, solutions oriented, problem solver, able to take technical responsibilities, • Team player, • Autonomous, • Solutions oriented, • Schemelect, • Eplan, • SEE Electrical Expert

Overview As a Human Factors Test Engineer within the Integration Test & Analysis Team at the Flight & Integration Test Centre, you will advance avionics and mission-systems evaluation across simulators, ground rigs, and flight campaigns. You will plan and execute HF test campaigns, align with V&V strategies, and support certification activities. Your work enables robust, safety-focused testing across platforms like A330 MRTT, A400M, C295, Eurodrone, and FCAS/NGF, with cross-functional collaboration and international travel. Compensaciones / Beneficios • Vacation days, • Hybrid working model, • Life insurance, • Health insurance, • Employee stock options, • Retirement plan Responsabilidades, • Plan and execute Human Factors test campaigns across simulators, rigs, and flight tests, • Coordinate cross-program Verification & Validation strategies and milestones, • Support flight testing by preparing orders, monitoring telemetry, and data reduction, • Draft Certification Cards, test plans, and Qualification/Certification Test Reports with Design Offices and Authorities, • Analyze system limitations, author snag reports, and justify design changes, • Enhance data analysis workflows and test methodologies from a Human Factors/ergonomics perspective across programs Requisitos principales, • At least 5 years of experience in Human Factors testing within systems integration environments (simulators, rigs, or aircraft), • Strong understanding of Workload, Situational Awareness, HMI, Usability, Ergonomics, • Experience with test scales (NASA TLX, Bedford, ISA) and certification processes (COHDA, FAHDA), • Advanced English and Spanish; willingness to travel domestically and internationally to test sites, • High adaptability in multidisciplinary environments, • Proactive problem-solving mindset, • Strong coordination abilities, • Core Human Factors concepts (workload, situational awareness, HMI, usability, ergonomics), • HF testing in simulators and real aircraft environments, • Experience with HF data analysis and workflow optimization

Overview As a GSE Engineer, you will design, validate and support ground support equipment for Airbus aircraft, with a primary focus on the Eurofighter program and involvement in other combat platforms. You will work within the TAS Services organization in TASSE6, collaborating with suppliers and customers to ensure equipment readiness and compatibility. You’ll manage specifications, manufacturing follow-up, and on-aircraft validation, while supporting installations at customer sites. Your role combines technical rigor with cross-functional and multinational teamwork to enable daily aircraft operations. Compensaciones / Beneficios • Vacation days plus extra days off, • Hybrid working when possible, • Life insurance, • Health insurance, • Employee stock options, • Development opportunities Responsabilidades, • Prepare GSE Technical Specifications, • Provide technical support for supplier selection, • Follow-up on design and prototype manufacturing, • Validate equipment on the aircraft and conduct qualification/compatibility tests, • Prepare recommendations for customers and conduct site surveys, • Provide technical assistance to customers and support installation/commissioning at customer MOB, • Analyze aircraft modifications and their impact on developed GSEs Requisitos principales, • Fluent English and Spanish (oral, written), • Strong teamwork and open mindset, • Good verbal and written communication skills, • Flexibility to travel and work in multinational teams, • Creativity to develop new ideas, • team collaboration, • effective communication, • adaptability, • GSE technical specifications, • design follow-up and validation, • prototype manufacturing follow-up

In this role you will design, configure and administer local and private networks for critical avionics environments at CLAEX, ensuring robust security per CCN-STIC and ENS.You will work with cross-functional teams to harden networks, manage firewalls and threat detection, and support secure remote

Overview As a Tactical Communications Lab Test Engineer, you will support the Flight & Integration Test Centre to validate complex communication systems across major Airbus programs. You’ll design rig tests, prepare data and scenarios, execute validation activities, and analyze results to drive reliable system performance. You will work in a multidisciplinary team, handling fault investigations and tool qualification to ensure robust mission-critical communications. This role combines hands-on testing with data-driven problem solving in a dynamic defense environment. Compensaciones / Beneficios • Vacation days and additional days-off, • Hybrid model of working when possible, • Life insurance and health insurance, • Employee stock options, • Retirement plan, • On-site facilities Responsabilidades, • Design and specify coherent rig test cases and procedures from technical documentation for rigs and validation environments, • Prepare pre-test data, including simulation requirements, test scripts, initialization files, and tactical scenarios, • Execute test steps in virtual, subsystem rig, and global system integration rigs; support on-aircraft ground and flight testing, • Assess system behavior, analyze results, and produce comprehensive test reports, • Identify and manage equipment and system problem reports throughout their lifecycle, • Manage lifecycle tools (DOORS, Octane, FTNet) and specify/qualify custom test tools (decoding, emulation, automation) Requisitos principales, • 2 to 6 years of system testing experience in Tactical/Mission/Safety Communication systems or similar, • Deep knowledge of COMMS Systems Under Test (Link 16/22/VMF, SATCOM, V/UHF Radios, Comm Servers) and related test tools, • Hands-on experience with lab equipment and simulators (e.g., 1553 Databus Analysers, TIGER, MIGATO, LEGS, AIDASS, LabView), • Requirements interpretation, test scripting, and systems behavior assessment, • Advanced level in English and Spanish (written and spoken), • Active NATO security clearance (or eligibility) and ITAR/National Export Control eligibility, • Proactive problem solver, • Open-minded, • Team player, • COMMS Systems Under Test (Tactical Datalinks, Link 16/22/VMF, SATCOM, V/UHF Radios, Comm Servers), • Lab equipment and simulators (e.g., 1553 Databus Analysers, TIGER, MIGATO, LEGS, AIDASS, LabView), • Test scripting and data analysis

Overview As Cyber Security Architect in Airbus Defence and Space, you will define and implement product security across the lifecycle. You will shape security architectures and ensure compliance with risk-based requirements. You’ll collaborate with customers, program managers, and engineers to embed security by design. This role offers worldwide scope in a challenging, international environment and the opportunity to influence secure aerospace products at scale. Compensaciones / Beneficios • Flexible work shift, • Hybrid working when possible, • Vacation days + additional days off, • Competitive salary and bonus, • Health insurance and retirement plans, • On-site facilities and development opportunities Responsabilidades, • Define and manage product security requirements and architectures across the lifecycle, • Perform security risk assessments and specify controls using methodologies such as MAGERIT, PILAR, NIST, EBIOS, EUROCAE ED202A/ED203B, • Ensure compliance with national/international security regulations, • Decompose high-level designs into detailed security designs for subsystems/components, • Drive security operating procedures and lifecycle maintenance, • Act as the product security focal point and advise on security-related aspects of programs, • Collaborate with customers and stakeholders to meet product security milestones, • Promote security-by-design and proactively mitigate risks in solutions Requisitos principales, • Excellent interpersonal and leadership skills, • Innovative mindset and ability to challenge status quo, • Passion for aircraft, security, and technology, • Ability to learn and grow in evolving environments, • Strong written and oral communication, detail-oriented and confidential, • Autonomous work style with team collaboration across international teams, • Customer focus and results orientation, • Minimum 3 years in information security and/or aircraft systems design/development or aircraft safety, • Proficiency in threat and risk analysis methods (MAGERIT, PILAR, NIST, EBIOS, EUROCAE ED203A/ED202A), • Collaboration and teamwork, • Strategic thinking and problem solving, • Proactive and self-motivated, • Security architecture design for systems and applications, • Network and operating system security, • System hardening and secure implementation