Aerospace manufacturing jobs in BoltonCreate job alerts

Mechanical Fitter - Night Shift 12 Month contract Based in Bolton Offering £28.35ph Inside IR35 + 33% night Shift uplift Apprenticeship Required Are you an experienced Mechanical Fitter? Do you hold an apprenticeship in a related industry? Do you want to work with an industry-leading company? If the answer is yes to these, then this could be the role for you! You will be a Mechanical Fitter working with a Leading Defence and Aerospace company where you will be responsible for carrying out manufacturing and test tasks within the mechanical department, in accordance with product certification procedures, defined workmanship standards, allocated budgets, and timescales to meet project objectives. What you will be involved with: • Certify the product in line with the product certification procedure, • Maintain product certification and approval via regular audits, • Possess a versatile skill base with the capability to apply these skills across a range of tasks, • Be fully conversant with all equipment, tools and measuring instruments associated with the manufacturing cycle, • Ensure manufacturing build times are met, • Check and complete all paperwork associated with the manufacturing data pack, • Maintain to the highest level, workmanship standards and product quality, • Ensure compliance with all associated procedures applicable to the manufacturing process, • Maintain a safe working environment Skillset/experience required: • Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21., • Formal further education certificate to HNC or equivalent certificate. If this sounds like a role that you would thrive in, then simply apply and we can discuss further! Mechanical Fitter - Night Shift 12 Month contract Based in Bolton Offering £28.35ph Inside IR35 + 33% night Shift uplift Apprenticeship Required Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

PLEASE READ BEFORE APPLYING: Please note that in order to be considered for this opportunity you will need to both be eligible for SC (Secret Level) UK Security Clearance AND have an apprenticeship. Both the role and client site have ITAR nationality restrictions Role Overview: Morson are recruiting for time served Electrical Fitters on behalf a leading defence equipment manufacturers based in Bolton, Greater Manchester. This is a contract role although highly likely to be long-term. Rates: £28.35 per hour Umbrella or £21.12 per hour (holiday pay on top of hourly rate) rates rise after 12 weeks to £29.70 per hour Umbrella or £22.12 per hour PAYE Monday - Friday 37 hours + The role will be responsible for carrying out manufacturing and test tasks within the electrical department, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives This role will now include an accommodation expense if the candidate is travelling from more than 30 miles away from BL5 postcode. This will need to be receipted and will be up to £400 per week (only for accommodation) Specific responsibilities include: • Certify the product in line with Product Certification procedure, • Demonstrated ability / willingness to certify own work in line with company quality standards, • Maintain product certification and approval via regular audits, • Possess a versatile skill base with the capability to apply these skills across a range of tasks, • Be fully conversant with all equipment, tools and measuring instruments associated with the manufacturing cycle, • Ensure manufacturing build, inspection and where relevant test times are met., • Check and complete all paperwork associated with the manufacturing data pack, • Maintain to the highest level, workmanship standards and product quality, • Ensure compliance with all associated procedures applicable to the manufacturing process, • Maintain a safe working environment, • Maintain a good housekeeping policy Essential: • Engineering/ craft apprenticeship ESSENTIAL, • Possess experience in electrical wiring and assembly, • IPC 610 certified/ trained preferred, • Previous experience in the aerospace or defence industry would be desirable, • Manual handling training, • Lifting and slinging (including overhead cranes) training, • ESD training

World Class Defence Organisation based in Stevenage and Bolton is currently looking to recruit 4x Supplier Quality Engineers.A strong background of Supplier Quality Engineering / Quality Engineer / Auditing is required. Defence, Aerospace or Automotive industries would be great. Rate: £45.00 per hourOvertime Rate: Hours worked over the standard 37 hours per week, will be paid at ‘time and a quarter’Location: Stevenage or Bolton – depending on your preference Hybrid / Remote working: The role will likely be 1-2 days per week onsite and the rest working remoteDuration: 6 or 12 Months initially with very likely extension. Contracts are often ongoing and long-term thereafter. IR35 status: Inside IR35 (Umbrella)Interview process: One stage video interviewSupplier Quality EngineersJob Description:An exciting opportunity has arisen for a Supplier Quality auditor to join the Supplier Quality Assurance team, supporting assurance of Mechanical & Electro-Mechanical suppliers This opportunity provides the chance to work within a dynamic quality team. The primary responsibility will be to plan and conduct supplier quality audits / surveillance activities to drive future process control. In addition, where applicable carry out inspection / verification activities to support the delivery of conforming production hardware. While ensuring adherence to our customer and supplier requirements. The Role: • Complete scheduled Quality Assurance audits at suppliers using standardised tools, • Conduct thorough verification / inspection of products to ensure they meet the required quality standards, • Identify and document any non-conformities in the manufacturing process and deviations from the product specifications, • Maintain accurate and organized records of all quality control activities, • Communicate findings to relevant departments / stakeholders and work cross functionally to implement root cause corrective actions at supplier, • Contribute to continuous improvement initiatives to enhance the quality of our products, • Participate in the Project Quality network to report and share the quality assurance status linked to applicable suppliers, • Provide non-conformance, root cause & corrective action data analysis and summary reports into senior stakeholdersSkills and Experience:, • Trained auditor to AS9100 is essential, • Experienced in conducting Quality Audits & surveillance, • Ideally minimum HNC/HND in Engineering would be desirable, • Experienced quality professional within Mechanical, Manufacturing or Electronic Engineering, • Proven track record in Quality, Supply Chain or Manufacturing, • Ideally defence, automotive or aerospace experience, • Familiarity with GD&T and able to use a variety of metrology equipment (where applicable), • Practitioner of current QA problem solving and improvement methods (8D, RCA, DMAIC, etc.), • Strong knowledge of the product lifecycle management, • Strong analytical skills; ability to run reports in Excel, use SAP QM system, and document management tools, • Continuous improvement awareness and ability to use own initiative to deliver improvements, • Experience is NADCAP is desirable, • Good planning and organising skills to ensure multiple tasks are prioritised and monitored to deliver set objectives, • Ability to communicate and influence effectively at all levels of the organisation, • Recognise and understand regulatory and certification requirements, and respond to them

Health, Safety & Environmental (HSE) Manager EXCLUSIVE ROLE Role: Lead health, safety, and environmental performance within a high-precision CNC manufacturing environment. Company: A specialist manufacturer of precision-machined components for the aerospace sector, supporting major engine programmes. Benefits: Competitive salary (£55,000 £65,000), 33 days holiday, pension scheme, free parking, produc... ZIPC1_UKTJ

MERITUS are recruiting for a Principal Quality Assurance Engineer to support with Supply Chain engineering programmes in the defence sphere from our client's site in Bolton. Please note, there will be regular supplier visits to international sites and you must have awareness of AS9100 and ISO 9001. PRINCIPAL QUALITY ASSURANCE ENGINEER - INSIDE IR35 - £45 PER HOUR (£333 PER DAY) - 6 MONTHS - 2 STAGE INTERVIEW PROCESS - Bolton (+INTERNATIONAL TRAVEL) • Complete scheduled Quality Assurance audits at suppliers using standardised tools, • Conduct thorough verification / inspection of products to ensure they meet the required quality standards, • Identify and document any non-conformities in the manufacturing process and deviations from the product specifications, • Maintain accurate and organized records of all quality control activities, • Communicate findings to relevant departments / stakeholders and work cross functionally to implement root cause corrective actions at supplier, • Contribute to continuous improvement initiatives to enhance the quality of our products, • Participate in the Project Quality network to report and share the quality assurance status linked to applicable suppliers, • Provide non-conformance, root cause & corrective action data analysis and summary reports into senior stakeholders What we're looking for from you: • Trained auditor to AS9100 is essential, • Experienced in conducting Quality Audits & surveillance, • Ideally minimum HNC/HND in Engineering would be desirable, • Experienced quality professional within Mechanical, Manufacturing or Electronic Engineering, • Proven track record in Quality, Supply Chain or Manufacturing, • Ideally defence, automotive or aerospace experience, • Familiarity with GD&T and able to use a variety of metrology equipment (where applicable), • Practitioner of current QA problem solving and improvement methods (8D, RCA, DMAIC, etc.), • Strong knowledge of the product lifecycle management, • Strong analytical skills; ability to run reports in Excel, use SAP QM system, and document management tools, • Continuous improvement awareness and ability to use own initiative to deliver improvements, • Experience is NADCAP is desirable, • Good planning and organising skills to ensure multiple tasks are prioritised and monitored to deliver set objectives, • Ability to communicate and influence effectively at all levels of the organisation, • Recognise and understand regulatory and certification requirements, and respond to them

World Class Defence Organisation is currently looking to recruit a Supply Chain Manager subcontractor on an initial 6 month contract. Rate: £50.00 per hourLocation: Stevenage or Bolton, depending on your preference.Hybrid / Remote working: 2 days onsite per weekContract: 37 Hours per weekOvertime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’Duration: 6 Months (initially and then ongoing and long-term thereafter)IR35 status: Inside IR35 (Umbrella)Supply Chain Manager Job Description:An opportunity has arisen for a Supply Chain Manager to join ISP in the Equipment's team. The successful candidate will bring their experience and knowledge to ensure effective Supplier performance, capability & Risk management. As a team, we work across all programmes in a changing environment, managing and implementing both mature and new technologies.Responsibilities /Skillset/experience required: • Internal and external assessment skills/knowledge; Business maturity, planning & control, relationship management, manufacturing excellence etc…, • Strong interpersonal skills – ability to further develop his / her network, • It would be desirable if you have SC21 Practitioner experience, • Very good negotiating and influencing skills, • Objective driven, determination to succeed, • Excellent communication skills: able to communicate verbally, in writing and present to at all levels of business, • Ideally a degree calibre Supply Chain professional with experience of international working in high technology companies., • Experience of supply chain management in the Aerospace, Defence or Manufacturing environments., • A proven ability to:, • Demonstrated ability to improve Supplier Performance (Delivery and Quality)using appropriate tools and lean methodologies, • Managing a portfolio of suppliers on a day to day basis and reporting into designated project the performance and supply chain risk, • Assess supply chain and suppliers capability to meet delivery profile for both current state vs Future state, • Competent in creating/ validating process flows, lead time analysis, understanding capacity bottlenecks, yield, resources and sub-tier mapping activities to form an industrial view of supplier, • Hold excellent problem solving skills and understanding of techniques such as DMAIC (Define, Measure, Analyse, Improve, Control) to develop and implement root cause analysis and improvement plans within Supply Chain, • Identify, Escalate and mitigate potential Supply Chain Risks and put in place associated improvement and mitigation plans. Manage risks to closure, • Conducting analysis and providing/delivering executive summaries

MERITUS are recruiting for a Supply Chain Manager to join our Defence client on an initial 6 month contract within their equipment's team in Bolton. SUPPLY CHAIN MANAGER - INSIDE IR35 - £50 PER HOUR - BOLTON, GREATER MANCHESTER - 6 MONTHS - SINGLE STAGE INTERVIEW PROCESS Overview of the Department An opportunity has arisen for a Supply Chain Manager to join an equipment-focused team. The successful candidate will use their experience and knowledge to support effective supplier performance, capability, and risk management. The team operates across multiple programmes within a dynamic environment, managing and implementing both established and emerging technologies. Responsibilities, Skills & Experience Required • Strong internal and external assessment capabilities, including:, • Business maturity, • Planning and control, • Relationship management, • Manufacturing excellence, • Strong interpersonal skills with the ability to develop and expand professional networks, • Desirable: SC21 Practitioner experience, • Very good negotiating and influencing skills, • Results-oriented with a strong drive to succeed, • Excellent communication skills, with the ability to:, • Communicate verbally, • Communicate in writing, • Present at all levels of the businessExperience & Capability, • Ideally degree-qualified (or equivalent) Supply Chain professional with experience working internationally in high-technology environments, • Experience in supply chain management within:, • Aerospace, • Defence, • Manufacturing, • Proven ability to:, • Improve supplier performance (delivery and quality) using appropriate tools and lean methodologies, • Manage a portfolio of suppliers on a day-to-day basis, including performance reporting and supply chain risk management, • Assess supplier capability against delivery requirements, including current and future state analysis, • Create and validate process flows, conduct lead time analysis, and identify capacity bottlenecks, yield, resources, and sub-tier mapping to build an overall supplier view, • Apply structured problem-solving techniques (e.g. DMAIC: Define, Measure, Analyse, Improve, Control) to conduct root cause analysis and implement improvement plans, • Identify, escalate, and mitigate supply chain risks, managing them through to resolution, • Conduct analysis and deliver executive-level summaries

Automation Engineer Bolton, UK Days £52,000 + Bonus Join a world-class automotive supplier at the forefront of advanced manufacturing, delivering innovative components and systems to major OEMs worldwide. We are seeking a talented and experienced Automation Engineer to drive the next phase of our production excellence in our Bolton facility. In this pivotal role, you will leverage your strong background in PLC programming, process automation, and production engineering to design, implement, and continuously enhance automated systems that boost efficiency, quality, and output in a high-volume manufacturing environment. Responsibilities - Automation Engineer • Design and implement automated processes to optimise production efficiency and throughput, • Analyse existing production processes to identify and apply the most effective automation technologies, • Diagnose and resolve faults in automated production processes and equipment swiftly and effectively, • Manage project budgets, spare parts, and associated expenses, • Partner with Production Engineering and Maintenance teams to implement automated processes and ensure smooth, stable handover to production operations, • Drive continuous development and improvement of production systems, processes, and machine performance, • Lead and support process improvements through structured improvement plans, • Propose and implement efficiency enhancements for machines and production processes, • Monitor performance and task Production Engineers with targeted improvements on the production line, • Plan optimal process flows and operator work methods to maximise output without compromising quality, • Set clear targets for project activities and rigorously track benefits and outcomes Experience & Qualifications - Automation Engineer • Advanced PLC Programming and Fault-Finding expertise (Allen Bradley, Siemens, Keyence, etc.) – ideally qualified to EAL / City & Guilds level or equivalent, • Proven track record in implementing and maintaining PLC systems and automated production processes in a manufacturing setting, • Solid knowledge of robotics, pneumatics, and mechanical systems commonly used in production environments, • Strong logical approach to problem solving and root cause corrective action (RCCA), • Familiarity with formal problem-solving methodologies (e.g., SGA, DMAIC, 7-step, PDCA, 5 Why, Fishbone Diagram) Benefits - Automation Engineer • Discretionary annual Bonus 7.5%, • up to 5.5% employer contribution, • EV Scheme: through salary sacrifice and free charging at site, • Medical Insurance, • Death in Service: 4 x annual salary For more information on this role, please contact Andy Haddon on 01453 796617, or send a copy of your CV to For details of other opportunities available within your chosen field, please visit ___ Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors. Ideal background / Previous roles may include: Maintenance Engineer, PLC Engineer, Electrical Engineer, Shift Engineer, Shift Technician, Reliability Engineer or field service engineer

Maintenance Engineer Bolton 3 Shift Pattern £48,000 + Bonus A leading global automotive supplier specialising in advanced vehicle components and systems for major OEMs worldwide. Join a world-class team driving the future of automotive manufacturing We are a premier Tier 1 automotive supplier with a strong presence in the UK, delivering innovative, high-quality components to the world's leading vehicle manufacturers. Our Bolton facility is a key high-volume production site focused on precision assembly and testing systems, and we are now seeking an experienced Maintenance Engineer to join our dynamic engineering team. This is a hands-on role ideal for a proactive, skilled tradesperson who thrives in a fast-paced, high-output manufacturing environment. You will play a critical role in maximising equipment uptime, driving continuous improvement, and supporting our commitment to world-class production standards. Responsibilities – Maintenance Engineer • Troubleshooting, repair, and maintenance of high-volume PLC-controlled production equipment, • Planning and performing preventative maintenance on critical assets, • Improvement and modification of assembly/test equipment and transfer systems, • Service and maintenance of electrical and mechanical site services/plant, • Supporting the installation and commissioning of new equipment Experience/Qualifications - Maintenance Engineer • Ideally qualified to ONC/HNC level (or equivalent) in Mechanical/Electrical Engineering, supported by City & Guilds Part 3 (or similar) and NVQ Level 2 & 3, • Time-served apprenticeship in a relevant engineering discipline, • Significant hands-on experience (minimum 2+ years) in high-volume manufacturing environments, • Proven track record in equipment repair, maintenance, and process improvement, • Experience in fitting, fabrication, and machining is highly advantageous, • Strong background in maintenance and fault-finding on PLC-controlled and robotic high-volume equipment (ideal but not essential), • Solid experience maintaining and diagnosing faults in hydraulic and pneumatic systems Benefits - Maintenance Engineer • Discretionary annual Bonus 7.5%, • up to 5.5% employer contribution, • EV Scheme: through salary sacrifice and free charging at site, • Medical Insurance, • Death in Service: 4 x annual salary For more information on this role, please contact Andy Haddon on 01453 796617, or send a copy of your CV to For details of other opportunities available within your chosen field, please visit ___ Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors. Ideal background / Previous roles may include: Maintenance Engineer, Shift Engineer, Shift Technician, Reliability Engineer or field service engineer

Manufacturing Engineer 12 Month Contract Based in Bolton Offering circa £35ph Inside IR35 Eligible for SC clearance Are you an experienced Manufacturing Engineer? Do hold a Level 3 Apprenticeship or BEng? Are you well experienced with SAP? Are you looking to work with an industry-leading company? If your answers are yes to these, then this could be the role for! As the Manufacturing Engineer, you will be working alongside a market-leading defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved with the assembly manufacturing facility with a key focus to ensure that the products are built efficiently. to this end, you will be carrying out activities including: • Compilation and update of Manufacturing Instructions., • Design, Commissioning, and proving of associated tooling., • Support the industrial validation process through the use of FMEA’s, FAI’s etc., • Resolution of technical problems that may arise during the manufacturing process., • Route card changes as a result or rework activities., • Management of Configuration Control by the embodiment of Design Modifications into the Manufacturing Instructions., • BEng in relevant Engineering Degree, • Have the ability to interpret Design Drawings with a view to producing Manufacturing Build Instructions for both Skilled and Semi-Skilled operators., • Have experience in Electronic subassembly manufacture through to System level builds., • Have experience and knowledge of the assembly process for small/miniature Electro-Mechanical Actuation Systems., • Must be able to work within, and contribute to a team environment., • Recognise and understand customer requirements, and respond to them., • Understand and work with Company Processes and Procedures., • Have the ability to communicate both within the working group and at various levels of the organisation., • Manual handling training., • ESD training. If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further!

Electrical Fitter 12 month contract Based in Bolton Offering £28.35ph Inside IR35 Are you an experienced Electrical Fitter? Do you hold Electrical Engineering or similar trade certificates? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Electrical Fitter, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: • Certify the product in line with Product Certification procedure, • Certify own work in line with company quality standards, • Maintain product certification and approval via regular audits, • Be fully conversant with all equipment, tools, and measuring instruments associated with the manufacturing cycle, • Ensure manufacturing build, inspection, and where relevant test times are met, • Check and complete all paperwork associated with the manufacturing data pack, • Maintain workmanship standards and product quality, • Ensure compliance with all associated procedures applicable to the manufacturing process Trade Certificates: Approved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship OR Vocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3 OR Vocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3 OR Vocational NVQ3 with Further Education, BTEC ONC/HNC Your skillset may include: • IPC 610 certified/ trained preferred, • Possess experience in electrical wiring and assembly, • Previous experience in the aerospace or defence industry would be desirable, • Manual handling training, • Lifting and slinging (including overhead cranes) training, • ESD training If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further!

An opportunity has arisen with my client for an Electrical Fitter to join them on a 12-month contract. As the Electrical Fitter you will be responsible for carrying out manufacturing and test tasks within the electrical department, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives.\n\nRole: Electrical Fitter\n Pay: £28.35 per hour via umbrella (rising to £29.70 per hour after 12 weeks)\n Location: Bolton\n Contract: 12 Months\n Hours: Monday - Friday, 37 hours per week\n Security Clearance: BPSS\n\nResponsibilities:\n\nCertify the product in line with Product Certification procedure.\nDemonstrated ability / willingness to certify own work in line with company quality standards.\nMaintain product certification and approval via regular audits.\nPossess a versatile skill base with the capability to apply these skills across a range of tasks.\nBe fully conversant with all equipment, tools and measuring instruments associated with the manufacturing cycle.\nEnsure manufacturing build, inspection and where relevant test times are met.\nCheck and complete all paperwork associated with the manufacturing data pack.\nMaintain to the highest level, workmanship standards and product quality.\nEnsure compliance with all associated procedures applicable to the manufacturing process.\nMaintain a safe working environment.\nMaintain a good housekeeping policy.\nWilling to contribute to an environment of process improvement\n Education/Qualifications\n\nApproved Apprenticeship/Apprenticeship Framework/Modern ApprenticeshipOR\n\nVocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3OR\n\nVocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3OR\n\nVocational NVQ3 with Further Education, BTEC ONC/HNC\n Skills/Experince\n * IPC 610 certified/ trained preferred. \n * Possess experience in electrical wiring and assembly. \n * Previous experience in the aerospace or defence industry would be desirable. \n * Manual handling training. \n * Lifting and slinging (including overhead cranes) training. \n * ESD training.\n Please send your updated CV to: Natalie Dalkin at Line Up Aviation\n Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best-known companies who demand the highest standard of applicants. \n "Follow @LineUpAviation on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at anytime! Thank you for your follow

Our client has an opportunity for a Production Test Engineer to join their team on a contract basis for 12 months. You will play a vital role in supporting testing and diagnostics of electrical/electronic sub-systems and circuit cards during the production phase of the product lifecycle. You will use your experience to provide technical support to the manufacturing test capability, to ensure programme targets are met to agreed time, cost and quality requirements.\n\nRole: Production Test Engineer - Live Build\n Location: Stevenage - fully onsite\n Hours: 37 per week\n Hourly Rate: £32-£36 per hour via Umbrella, inside IR35\n Clearance: SC required before starting, UK Eyes Only due to project\n\nWhat you'll be doing:\n You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment, carrying out the following:\n\nProviding test engineering support to operators on the shopfloor, including supporting the introduction of new test equipment.\nTesting and diagnosing complex electrical/electronic systems, sub-assemblies and circuit cards down to component level.\nGenerating test specifications, operator instructions and technical reports - based on higher-level requirements and information.\nPromptly identifying remedial and corrective actions to allow Manufacturing to continue in line with the programme, following production test failures.\nSupporting meetings with Quality and Operations to provide status updates on Test Engineering actions and investigations.\n Requirements:\n Essential:\n\nMinimum HNC level of Engineering qualifications or equivalent.\nGood understanding of digital and analogue electronic measurement and test principles, and fault diagnosis techniques, with demonstrable experience down to component level.\nAwareness of electrical/electronic sub-system and system design, integration and test principles.\nGood verbal and written communication skills, including generation of test specifications, operator instructions and technical reports.\nAbility to plan and organise one's work according to assigned priorities.\n Advantageous:\n\nKnowledge of RF and Microwave technology at the subsystem level.\nExperience in operating manual and automated test equipment in an Electronics Manufacturing environment.\n\nIf you are interested in applying for this position and you meet the requirements, please apply immediately!\n\nLine Up Aviation is a specialist aviation and aerospace recruitment company that has been operating all over the world for more than 30 years. We work with some of the industry's best-known companies and pride ourselves with working to the highest standard of service supported by an ingrained culture of honesty and integrity.\n\n"Follow @LineUpAviation on Twitter for all our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at any time! Thank you for your follow

An opportunity has arisen with my client for an Electrical Wiring Operator to join them on a 12-month contract. As an Electrical Wiring Operator you will join the Calibration and Maintenance Team to fault diagnose and repair bespoke cabling to drawing specifications.\n\nRole: Electrical Wiring Operator \n Pay: £28.35 per hour via umbrella (rising to £29.70 per hour after 12 weeks)\n Location: Bolton\n Contract: 12 Months\n Hours: Monday - Friday, 37 hours per week\n Security Clearance: BPSS however needs to achieve Security Clerance.\n\nResponsibilities:\n\nFault finding and subsequent repair of cable assemblies.\nCarry out surface mount repair on CCAs.\nMaintain and repair test/measuring equipment to component level.\nPAT testing across the manufacturing site.\nInterrogate drawings during fault finding activities.\nSafety systems testing of Test & Measuring equipment in line with documented procedures.\nProvide Technical support to facilitate the efficient servicing of STTE to enable production testing of hardware and repair phases of the contract.\nMaintain excellent workspace husbandry disciplines.\nMaintain a high degree of tool control and FOD practices.\nAssist with maintenance of manufacturing aids as and when required.Skills/Experince\n\nAll three of the below are required:\nElectrical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard)\nElectrical Engineering / Manufacturing Level 3 academic qualification (ONC, diploma, etc.)\nElectrical Engineering / Manufacturing Level 3 vocational qualification (NVQ) *Not required if a L3 apprenticeship standard has been achieved\nIPC 620 & Dynamic Cabling certified/ trained preferred.\nPossess experience in electrical wiring and assembly.\nPrevious experience in the aerospace or defence industry would be desirable.Please send your updated CV to: Natalie Dalkin at Line Up Aviation\n Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best-known companies who demand the highest standard of applicants. \n "Follow @LineUpAviation on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at anytime! Thank you for your follow

Location: Bolton OR Stevenage (2 days per week onsite + supplier travel)\n\nDuration: 6 month initial contract\n\nInside IR35\n\nRole details: \n\nOur client, a prominent defence organisation, is strengthening its Quality Division and has opportunities for Quality Assurance Engineers to join their Supply Chain team on a contract basis.\n\nThis role will be based in either Stevenage or Bolton, with the flexibility of hybrid working and travel to UK supplier sites. \n\nResponsibilities: \n\nThe primary responsibility will be to plan and conduct supplier quality audits / surveillance activities to drive future process control. In addition, where applicable carry out inspection / verification activities to support the delivery of conforming production hardware. While ensuring adherence to our customer and supplier requirements.\n\nComplete scheduled Quality Assurance audits at suppliers using standardised tools.\nConduct thorough verification and inspection of products to ensure they meet the required quality standards.\nIdentify and document any non-conformities in the manufacturing process and deviations from the product specifications.\nMaintain accurate and organised records of all quality control activities.\nCommunicate findings to relevant departments and work cross-functionally to implement root cause corrective actions at suppliers.\nContribute to continuous improvement initiatives to enhance the quality of products.\nParticipate in the Project Quality network to report and share the quality assurance status linked to applicable suppliers.\nProvide non-conformance, root cause, and corrective action data analysis and summary reports to senior stakeholders.\n\nWhat We're Looking for from You:\n\nTrained auditor to AS9100 standards is essential.\nExperience in conducting Quality Audits and surveillance.\nQuality experience in Mechanical, Manufacturing, or Electronic Engineering.\nProven track record in Quality, Supply Chain, or Manufacturing.\nExperience in the Defence, Automotive, or Aerospace industry is highly desirable.\nFamiliarity with GD&T and ability to use a variety of metrology equipment (where applicable).\nPractitioner of current QA problem-solving and improvement methods (8D, RCA, DMAIC, etc.).\nStrong analytical skills, ability to run reports in Excel, use SAP QM system, and document management tools.\nContinuous improvement awareness and ability to use own initiative to deliver improvements.\nExperience with NADCAP (National Aerospace and Defense Contractors Accreditation Program) is desirable.\nGood planning and organising skills to ensure multiple tasks are prioritised and monitored to deliver set objectives.\nAbility to communicate and influence effectively at all levels of the organisation.\nRecognise and understand regulatory and certification requirements, and respond to them. \n\nThis role also includes opportunities for significant professional growth within the supply chain quality team.\n\nInterested? Apply today via the link provided

Electrical Inspector\n\n12 month contract\n\nBased in Bolton\n\nOffering £28.35ph Inside IR35\n\nDo you have experience as an Electrical Inspector?\n\nDo you hold Electrical/Electronics trade qualifications?\n\nDo you want to work with an industry-leading company?\n\nIf your answers are yes to these, then this could be the role for you!\n\nAs the Electrical Inspector, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry!\n\nYou will be involved in:\n\nResponsible for all elements necessary to achieve and maintain the quality of deliverable hardware\nCertification of product in line with processes and procedures\nExamining for correct assembly including verifying all forms of electrical connections\nExamining the finish of all parts\nInspect for physical damage\nInspection checks for non-product certification activities\nRaise and maintain relevant data records/non-conformance reports\nProduce relevant inspection/quality control documentation/history sheets\nMaintain product certification and approval via regular audits\nEnsure compliance with all associated procedures applicable to the manufacturing process \n\nYour skillest may include:\n\nMaintain a safe working environment\nMaintain a good housekeeping policy\nFormal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 or HNC\nExperience as a skilled person.\nIPC 610 & IPC 620 certified/trained\nManual handling training\nESD Training \n\nIf this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further!\n\nElectrical Inspector\n\n12 month contract\n\nBased in Bolton\n\nOffering £28.35ph Inside IR35\n\nDisclaimer:\n\nThis vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change

Manufacturing Engineer\n\n12 Month Contract\n\nBased in Bolton\n\nOffering £35ph Inside IR35\n\nAre you an experienced Manufacturing Engineer?\n\nDo you hold an Apprenticeship and NVQ/SVQ Level 3?\n\nAre you experienced with SAP?\n\nAre you looking to work with an industry-leading company?\n\nIf your answers are yes to these, then this could be the role for!\n\nAs the Manufacturing Engineer, you will be working alongside a market-leading defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry.\n\nYou will be involved in:\n\nCompilation and update of Manufacturing Instructions.\nDesign, Commissioning, and proving of associated tooling.\nSupport the industrial validation process through the use of FMEA's, FAI's etc.\nResolution of technical problems that may arise during the manufacturing process.\nRoute card changes as a result or rework activities.\nManagement of Configuration Control by the embodiment of Design Modifications into the Manufacturing Instructions.\nSupport to the Non-Conformance Process using SAP.Your skillset may include:\n\nFormal technical Engineering/Craft Apprenticeship to NVQ Level 3/TR23/TR21, with a Formal further education certificate to HNC or equivalent in a relevant subject\nSAP experience\nThe ability to interpret Design Drawings with a view to producing Manufacturing Build Instructions\nExperience in Electronic subassembly manufacture through to System level builds\nExperience and knowledge of the assembly process for small/miniature Electro-Mechanical Actuation Systems\nManual handling training.\nESD training. \n\nIf this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further!\n\nManufacturing Engineer\n\n12 Month Contract\n\nBased in Bolton\n\nOffering £35ph Inside IR35\n\nDisclaimer:\n\nThis vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change

Our client has an opportunity for an Electrical Calibration Operator to join them on a 12-month contract. You will be a be valued member of the Manufacturing function and you will be tasked to carry out routine calibration of Special To Type Test Equipment (STTE) and Commercial Off The Shelf (COTS) equipment.\n\nRole: Electrical Calibration Operator\n Location: Bolton - fully onsite\n Clearance: BPSS required to start\n Hourly Rate: £28.35 via Umbrella - inside IR35, rising to £29.70 after 3 months\n\nWhat you'll be doing: \n\nWorking in a multi discipline team to support the Operations team.\nInitial calibration, routine calibration and maintenance of test and measurement equipment.\nEnsure that both factory and proprietary test and measuring equipment is maintained in line with current procedures. \nCarry out calibration and repair tasks in accordance with departmental processes and procedures.\nGenerating clear and comprehensive calibration/maintenance records for traceability purposes.\n Requirements: \n\nElectrical Apprenticeship in one of the following\nApproved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship\nVocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3\nVocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3\nVocational NVQ3 with Further Education, BTEC ONC/HNC\nGenerate clear and comprehensive calibration & maintenance records.\nExperience of calibrating COTS/Special to Type Test Equipment\nExperience of calibrating electrical equipment such as Power Supplies, Mustimeter's, Oscilloscopes, Function Generators, etc.\nExperience of In-service Inspection and Testing of Electrical Equipment\nBe competent in following manufacturer's instructions.\nA good understanding of SAP would be desirable.\n If you are interested in applying for this position and you meet the requirements, please apply immediately!\n\nLine Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best known companies who demand the highest standard of applicants. \n\n"Follow @LineUpAviation on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at anytime! Thank you for your follow

An opportunity has arisen with my client for a Supply Chain Manager to join them on a 6 -month contract. As the Supply Chain Manager, you will bring your experience and knowledge to ensure effective Supplier performance, capability & Risk management.\n\nRole: Supply Chain Manager\n Pay: Up to £50 per hour via umbrella\n Location: Bolton /Stevenage\n Contract: 6 Months\n Hours: Monday - Friday, 37 hours per week\n Security Clearance: BPSS, must be able to achieve Security clearance\n\nResponsibilities:\n\nImprove Supplier Performance (Delivery and Quality) using appropriate tools and lean methodologies\nConducting analysis and providing/delivering executive summaries\nIdentify, Escalate and mitigate potential Supply Chain Risks and put in place associated improvement and mitigation plans. Manage risks to closure\nAssess supply chain and suppliers capability to meet delivery profile for both current state vs Future state\nCreating/ validating process flows, lead time analysis, understanding capacity bottlenecks, yield, resources and sub-tier mapping activities to form an industrial view of supplierSkills/Experince\n\nIdeally a degree calibre Supply Chain professional with experience of international working in high technology companies.\nExperience of supply chain management in the Aerospace, Defence or Manufacturing environments.\nHold excellent problem-solving skills and understanding of techniques such as DMAIC (Define, Measure, Analyse, Improve, Control) to develop and implement root cause analysis and improvement plans within Supply Chain\nInternal and external assessment skills/knowledge; Business maturity, planning & control, relationship management, manufacturing excellence etc…\nStrong interpersonal skills - ability to further develop his / her network\nIt would be desirable if you have SC21 Practitioner experience\nVery good negotiating and influencing skills\nObjective driven, determination to succeed\nExcellent communication skills: able to communicate verbally, in writing and present to at all levels of businessfor this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation\n Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best-known companies who demand the highest standard of applicants. \n "Follow @LineUpAviation on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at anytime! Thank you for your follow

Goods Inwards Inspector\n\n12 month contract\n\nBased in Bolton\n\nOffering £28.35ph Inside IR35\n\nDo you have goods in inspection experience?\n\nDo you have experience with SAP?\n\nDo you want to work with an industry-leading company?\n\nIf your answer to these is yes, then this could be the role for you!\n\nAs the Goods Inwards Inspector, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. \n\nYou will be involved in:\n\nEnsuring that goods received from suppliers meet the criteria of the purchase order and are compliant in all respects.\nVerify and accept procured products in line with contractual conditions.\nPracticed in reading and understanding assembly drawings with due regard to dimensional tolerances and machining.\nExamining the finish of all parts to detect faulty finishing or painting, deterioration of surfaces etc. Undertaking first-off inspections.\nProduce relevant inspection/quality control documentation.\nCheck and complete all paperwork associated with the delivered article.\nEnsure inspection times are met.\nControl defect items via segregation from good products. Raise and maintain relevant defect reports.\nMaintain product verification approval process via regular audits. Inspection of PCB\nEnsure compliance with all associated procedures applicable to the manufacturing process. \n\nYour Skillset may include:\n\nFormal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 or HNC. \nSAP literate \n\nIf this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further!\n\nGoods Inwards Inspector\n\n12 month contract\n\nBased in Bolton\n\nOffering £28.35ph Inside IR35\n\nDisclaimer:\n\nThis vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change

Mechanical Fitter - Night Shift\n\n12 Month contract\n\nBased in Bolton \n\nOffering £28.35ph Inside IR35 + 33% night Shift uplift\n\nApprenticeship Required\n\nAre you an experienced Mechanical Fitter?\n\nDo you hold an apprenticeship in a related industry?\n\nDo you want to work with an industry-leading company?\n\nIf the answer is yes to these, then this could be the role for you!\n\nYou will be a Mechanical Fitter working with a Leading Defence and Aerospace company where you will be responsible for carrying out manufacturing and test tasks within the mechanical department, in accordance with product certification procedures, defined workmanship standards, allocated budgets, and timescales to meet project objectives.\n\nWhat you will be involved with:\n\nCertify the product in line with the product certification procedure\nMaintain product certification and approval via regular audits\nPossess a versatile skill base with the capability to apply these skills across a range of tasks\nBe fully conversant with all equipment, tools and measuring instruments associated with the manufacturing cycle\nEnsure manufacturing build times are met\nCheck and complete all paperwork associated with the manufacturing data pack\nMaintain to the highest level, workmanship standards and product quality\nEnsure compliance with all associated procedures applicable to the manufacturing process\nMaintain a safe working environment \n\nSkillset/experience required:\n\nFormal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21.\nFormal further education certificate to HNC or equivalent certificate. \n\nIf this sounds like a role that you would thrive in, then simply apply and we can discuss further!\n\nMechanical Fitter - Night Shift\n\n12 Month contract\n\nBased in Bolton \n\nOffering £28.35ph Inside IR35 + 33% night Shift uplift\n\nApprenticeship Required\n\nDisclaimer:\n\nThis vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change

Electrical Fitter\n\n12 month contract\n\nBased in Bolton\n\nOffering £28.35ph Inside IR35\n\nAre you an experienced Electrical Fitter?\n\nDo you hold Electrical Engineering or similar trade certificates?\n\nDo you want to work with an industry-leading company?\n\nIf your answer to these is yes, then this could be the role for you!\n\nAs the Electrical Fitter, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry.\n\nYou will be involved in:\n\nCertify the product in line with Product Certification procedure\nCertify own work in line with company quality standards\nMaintain product certification and approval via regular audits\nBe fully conversant with all equipment, tools, and measuring instruments associated with the manufacturing cycle\nEnsure manufacturing build, inspection, and where relevant test times are met\nCheck and complete all paperwork associated with the manufacturing data pack\nMaintain workmanship standards and product quality\nEnsure compliance with all associated procedures applicable to the manufacturing process \n\nTrade Certificates:\n\nApproved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship\n\nOR\n\nVocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3\n\nOR\n\nVocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3\n\nOR\n\nVocational NVQ3 with Further Education, BTEC ONC/HNC\n\nYour skillset may include:\n\nIPC 610 certified/ trained preferred\nPossess experience in electrical wiring and assembly\nPrevious experience in the aerospace or defence industry would be desirable\nManual handling training\nLifting and slinging (including overhead cranes) training\nESD training \n\nIf this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further!\n\nElectrical Fitter\n\n12 month contract\n\nBased in Bolton\n\nOffering £28.35ph Inside IR35\n\nDisclaimer:\n\nThis vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change

Our client has an opportunity for a Goods in Inspector to join them on a contract basis for 12 months. You will be ensuring the goods received from suppliers meet the criteria of the purchase order and are compliant in all respects.\n\nRole: Goods In Inspector\n Location: Bolton\n Hours: 37 per week\n Clearance: full SC required before starting\n Hourly Rate: £28.35 per hour via an umbrella company, inside IR35\n\nWhat you'll be doing:\n\nThe role of the Goods Inwards Inspector is to ensure that goods received from suppliers meet the criteria of the purchase order and are compliant in all respects.\nVerify and accept procured product in line with contractual conditions.\nPracticed in reading and understanding assembly drawings with due regards to dimensional tolerances and machined.\nExamining the finish of all parts to detect faulty finishing or painting, deterioration of surfaces etc. Undertaking first off inspections.\nProduce relevant inspection/quality control documentation.\nCheck and complete all paperwork associated with the delivered article.\nEnsure inspections times are met.\nControl defect items via segregation from good product. Raise and maintain relevant defect reports.\nMaintain product verification approval process via regular audits. Inspection of PCB\nEnsure compliance with all associated procedures applicable to the manufacturing process.\nMaintain to the highest level, workmanship standards and product quality.\nContribute to the maintenance of an orderly and safe working environment.\n Requirements:\n\nGoods in Inspection experience\nApproved Apprenticeship/Apprenticeship Framework/Modern ApprenticeshipOR\n\nVocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3OR\n\nVocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3OR\n\nVocational NVQ3 with Further Education, BTEC ONC/HNC\nSAP literate is desirable.\n If you are interested in applying for this position and you meet the requirements, please apply!\n\nLine Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best known companies who demand the highest standard of applicants. \n\n"Follow @LineUpAviation on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at anytime! Thank you for your follow

Our client has an opportunity for a Mechanical Engineer to join their Calibration and Maintenance Team. You will be joining a dynamic and focussed team, responsible for the support of the manufacturing function across all stages of product assembly integration and test. The team are self-motivated and work directly with support functions and engineers across MBDA to resolve routine and non-routine tasks arising within the business.\n\nRole: Mechanical Engineer\n Location: Bolton, fully onsite\n Hours: 37 per week\n Hourly Rate: £32-£35 per hour via Umbrella, inside IR35\n Clearance: SC required before starting\n\nWhat you'll be doing:\n\nThe main aspects of the role will be as technical support for the metrology department supporting COTS (commercial of the shelf) equipment and STTE (Special to type test equipment) calibration and maintenance.\nYou will be required to assist production with technical queries on fixtures and tooling along with supporting CMM (Co-ordinate measuring machine) inspection work.\nYou will be required to guide operators on best practice within the metrology department on day-to-day technical queries alongside looking at ways to improve process and measurement techniques within the department.\nYou will also give technical support for mechanical calibration such as high/low pressure & temperature calibrations.\n Requirements:\n\nMinimum qualification: HNC in Mechanical Engineering.\nExperience and knowledge of calibrating torque tools to ISO 6789-2:2017 required.\nGood knowledge of Geometric Dimensioning & Tolerancing (GD&T) required.\nExperience and knowledge in dimensional calibration required\nExperience and knowledge of using and creating programs for coordinate measuring machine required.\nGood knowledge of temperature and pressure calibration desirable\nAble to deal with multiple issues, tasks and priorities concurrently.If you are interested in applying for this position and you meet the requirements, please apply immediately!\n\nLine Up Aviation is a specialist aviation and aerospace recruitment company that has been operating all over the world for more than 30 years. We work with some of the industry's best-known companies and pride ourselves with working to the highest standard of service supported by an ingrained culture of honesty and integrity.\n\n"Follow @LineUpAviation on Twitter for all our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at any time! Thank you for your follow

On behalf of our client, we are seeking to recruit several Mechanical Fitter to join on an initial 12-month contract. As a Mechanical Fitter you will be responsible for carrying out manufacturing and test tasks within the mechanical department, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives.\n\nRole: Mechanical Fitter\n\nPay: £28.35 Per hour via Umbrella rate\n\nContract: Monday to Friday, 37 Hours a week,12-month contract\n\nLocation: Filton\n\nIR35 Status: Inside\n\nSecurity Clearance: BPSS Start however will required to gain SC Clearance\n\nResponsibilities\n\nCertify the product in line with the product certification procedure. \nMaintain product certification and approval via regular audits. \nPossess a versatile skill base with the capability to apply these skills across a range of tasks. \nBe fully conversant with all equipment, tools and measuring instruments associated with the manufacturing cycle. \nEnsure manufacturing build times are met. \nCheck and complete all paperwork associated with the manufacturing data pack. \nMaintain to the highest level, workmanship standards and product quality. \nEnsure compliance with all associated procedures applicable to the manufacturing process. \nMaintain a safe working environment. \nMaintain a good housekeeping policy. \nCommunicate best practice to other team members. \nThe successful candidate should be a team player who is able to demonstrate customer focus. \nThey should also have proven planning and organising skills and be flexible and adaptable. \n Education/Essential Experince\n\nFormal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21. \nFormal further education certificate to HNC or equivalent certificate. \nSignificant mechanical fitting experience required - the work at at a fine detailed level, so any experience with intricate workIf you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation\n\nLine Up Aviation is a specialist aviation and aerospace recruitment company that has been operating all over the world for more than 30 years. We work with some of the industry's best-known companies and pride ourselves with working to the highest standard of service supported by an ingrained culture of honesty and integrity.\n\n"Follow @LineUpAviation on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at anytime! Thank you for your follow

MERITUS are recruiting for a Principal Quality Assurance Engineer to support with Supply Chain engineering programmes in the defence sphere from our client's site in Bolton. Please note, there will be regular supplier visits to international sites and you must have awareness of AS9100 and ISO 9001.\n\nPRINCIPAL QUALITY ASSURANCE ENGINEER - INSIDE IR35 - £45 PER HOUR (£333 PER DAY) - 6 MONTHS - 2 STAGE INTERVIEW PROCESS - Bolton (+INTERNATIONAL TRAVEL)\n\nComplete scheduled Quality Assurance audits at suppliers using standardised tools\nConduct thorough verification / inspection of products to ensure they meet the required quality standards\nIdentify and document any non-conformities in the manufacturing process and deviations from the product specifications\nMaintain accurate and organized records of all quality control activities\nCommunicate findings to relevant departments / stakeholders and work cross functionally to implement root cause corrective actions at supplier\nContribute to continuous improvement initiatives to enhance the quality of our products\nParticipate in the Project Quality network to report and share the quality assurance status linked to applicable suppliers\nProvide non-conformance, root cause & corrective action data analysis and summary reports into senior stakeholders \n\nWhat we're looking for from you:\n\nTrained auditor to AS9100 is essential\nExperienced in conducting Quality Audits & surveillance\nIdeally minimum HNC/HND in Engineering would be desirable\nExperienced quality professional within Mechanical, Manufacturing or Electronic Engineering\nProven track record in Quality, Supply Chain or Manufacturing\nIdeally defence, automotive or aerospace experience\nFamiliarity with GD&T and able to use a variety of metrology equipment (where applicable)\nPractitioner of current QA problem solving and improvement methods (8D, RCA, DMAIC, etc.)\nStrong knowledge of the product lifecycle management\nStrong analytical skills; ability to run reports in Excel, use SAP QM system, and document management tools\nContinuous improvement awareness and ability to use own initiative to deliver improvements\nExperience is NADCAP is desirable\nGood planning and organising skills to ensure multiple tasks are prioritised and monitored to deliver set objectives\nAbility to communicate and influence effectively at all levels of the organisation\nRecognise and understand regulatory and certification requirements, and respond to them

Customer Service Manager\n\nBolton\n\n£34,000 - £35,000 + benefits\n\nTake the pressure of sales targets out of your career without giving up the customer relationships you love.\n\nHere, you’ll focus on building long-term customer loyalty and improving the experience for a growing manufacturing client base. You’ll have the space to think strategically, resolve issues professionally and make a real impact on how customers perceive the business.\n\nEnjoy a clear path to progression, with extensive training and development programmes that will sharpen both your commercial and leadership skills. And with wellbeing initiatives, a social club and perks like cycle to work and death in service cover, you’ll have the support you need both inside and outside of work.\n\nAnd with flexible office-based hours, you’ll be able to fit your week around life as well as work.\n\nWhat you’ll do\n\nYou’ll own and improve the customer experience from initial RFQ and onboarding through to dispatch. That means turning first-time orders into repeat business and keeping customers happy, informed and supported throughout their journey.\n\nSpecifically, you’ll:\n\n * Be the central point of contact for customers, providing updates, resolving issues and managing escalations\n\n * Follow up on RFQs to confirm orders or understand why they weren’t placed\n\n * Work closely with sales and procurement to improve order visibility, forecasts and service levels\n\n * Conduct regular feedback surveys and use the insights to close gaps in service\n\nWhat you’ll need\n\n * Strong customer-facing experience in manufacturing, with a track record of handling disputes professionally\n\n * Some commercial or sales background, ideal if you’re an inside sales person who wants to focus more on service than targets\n\n * Confident communication and the ability to influence across teams\n\nAbout the company\n\nA versatile manufacturing business supplying six product families of highly engineered components into growth sectors such as aerospace and defence, renewable energy, medical and pharmaceutical. They operate as a decentralised SME within a large corporate, giving you a close-knit environment with the financial strength of a PLC.\n\nPlease click the ‘Apply’ button. Don’t worry if your CV isn’t up to date. Just send what you have and we’ll deal with that later

Electrical Calibration Operator\n\n12-Month Contract\n\nBased in Bolton\n\nOffering £28.35ph Inside IR35\n\nApprenticeship required - Electrical/Electronic\n\nDo you hold an Electrical/Electronic Apprenticeship?\n\nDo you have experience conducting calibrations on instruments?\n\nDo you want to work with an industry-leading company?\n\nIf the answer is yes to these, then this role could be for you.\n\nYou will be working as the Electrical Calibration Operator with a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry.\n\nYou will be a key member of the Manufacturing function within the business where you will be tasked to carry out routine calibration of Special To Type Test Equipment (STTE) and Commercial Off The Shelf (COTS) equipment. This role will not be working with products so it is not essential you have experience with products, rather Test and process equipment experience is ideal.\n\nFor this role, you will be required to hold an approved apprenticeship relating to Electrical/Electronic Engineering to NVQ Level 3/TR23/TR21.\n\nYour responsibilities will involve:\n\nWorking in a multi-disciplined team to support the Operations team.\nInitial calibration, routine calibration, and maintenance of test and measurement equipment.\nEnsure that both factory and proprietary test and measuring equipment are maintained in line with current procedures.\nCarry out calibration and repair tasks in accordance with departmental processes and procedures.\nGenerating clear and comprehensive calibration/maintenance records for traceability purposes.The skillset/experience you may have includes:\n\nGenerate clear and comprehensive calibration & maintenance records.\nExperience in calibrating COTS/Special to Type Test Equipment\nExperience in calibrating electrical equipment such as Power Supplies, Multimeters, Oscilloscopes, Function Generators, etc.\nExperience in In-service Inspection and Testing of Electrical Equipment\nBe competent in following the manufacturer's instructions.\nA good understanding of SAP would be desirable.\nTime served apprenticeship/modern apprenticeship or NVQ Level 3\nCity & Guilds part 2 & 3/ONC/HNC in Electronics\nExperience working on Environmental Stress Screening Facilities (ESS) \n\nIf this sounds like an opportunity you want to be involved in and could see yourself growing in, then simply apply and we can discuss further! \n\nElectrical Calibration Operator\n\n12-Month Contract\n\nBased in Bolton\n\nOffering £28.35ph Inside IR35\n\nApprenticeship required - Electrical/Electronic\n\nDisclaimer:\n\nThis vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change

Mechanical Inspector\n\n12 Month Contract\n\nBased in Bolton\n\nOffering £28.35ph Inside IR35\n\nAre you an experienced Mechanical Inspector?\n\nDo you want to work with an industry-leading company?\n\nIf your answers are yes to these, then this could be the role for you!\n\nAs the Mechanical Inspector, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry!\n\nYou will be involved in:\n\nCertify the product in line with the product certification procedure\nExamining for correct assembly\nExamining the finish of all parts to detect faulty finishing or painting, deterioration of surfaces etc...\nInspect for physical damage\nInspection checks non-product certification\nMonitor product certification operators\nCheck and complete all paperwork associated with the manufacturing data pack\nControl defect items via segregation from good product\nRaise and maintain relevant data records/defect reports\nProduce relevant inspection/quality control documentation/history sheets\nCare for and use specialised inspection tools\nMaintain product certification and approval via regular audits\nEnsure compliance with all associated procedures applicable to the manufacturing process\nEnsure inspection times are met \n\nYour skillset may include:\n\nFormal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21or HNC\nSeveral years' experience as a skilled person\nIPC 610 certified / trained preferred \n\nIf this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further!\n\nMechanical Inspector\n\n12 Month Contract\n\nBased in Bolton\n\nOffering £28.35ph Inside IR35\n\nDisclaimer:\n\nThis vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change

Health, Safety & Environmental (HSE) Manager EXCLUSIVE ROLE Role: Lead health, safety, and environmental performance within a high-precision CNC manufacturing environment. Why this role: Play a critical role in ensuring safety and compliance within a highly regulated aerospace setting where precisio

Electrical Fitter 12 month contract Based in Bolton Offering £28.35ph Inside IR35 Are you an experienced Electrical Fitter? Do you hold Electrical Engineering or similar trade certificates? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Electrical Fitter, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: • Certify the product in line with Product Certification procedure, • Certify own work in line with company quality standards, • Maintain product certification and approval via regular audits, • Be fully conversant with all equipment, tools, and measuring instruments associated with the manufacturing cycle, • Ensure manufacturing build, inspection, and where relevant test times are met, • Check and complete all paperwork associated with the manufacturing data pack, • Maintain workmanship standards and product quality, • Ensure compliance with all associated procedures applicable to the manufacturing process

Electrical Fitter Greater Manchester Aerospace & Defence / Manufacturing Industries welcome 12 Month Contract – Likely to be extended Are you an Apprenticeship trained Electrical Fitter with a passion for high-quality workmanship? We are seeking a skilled professional t

Regional Applications Engineer CNC Cutting tools Interested in learning more about this job Scroll down and find out what skills, experience and educational qualifications are needed. c£40,000 - £42,000 + bonus, comm, FE car + benefits West Midlands (Postcodes BB, BL, CH, CW, FY, L, LL, M, OL, PR, WA, B, DY, ST, SY, TF, WS, WV) (Ideally based in centre of the area) This successful, longstanding and hugely innovative organisation is one of the major players in the production of a superb range of tools for metalwork including turning, grooving, milling and boring. Their products are sold into the Manufacturing, Automotive and Aerospace sectors. To further strengthen their team, they have a current requirement for a talented Regional Applications Engineer. Utilising both your technical and commercial skills you will be supporting the development of customer relationships within direct and distribution networks. You will be working within the sales team and reporting to the Regional Manager. You will be covering the West Midlands and, due to the size of the territory, ideally you will be based in the centre of the area though this is not essential. Supporting three Area Sales Managers, you will be responsible for the promotion of a range of high-quality cutting tools and solutions to a range of sectors including Manufacturing, Automotive and Aerospace. A strong CNC background is essential and ideally you will have worked previously as a Miller, Turner, Setter, Operator. You could have an ONC/HNC Mechanical Engineering qualification or CNC experience gained within a relevant Technical Apprenticeship. It may be that you already have some experience in Cutting Tools sales with distributors and direct customers though this is not essential. CAD/CAM experience would be highly beneficial. My client's induction programme is superb and whilst excellent support will be given, you should be a disciplined, target driven individual capable of working on your own initiative. xrnqpay This is a first-class opportunity to join an established, forward thinking market leader and longer- term career prospects are excellent.

Technical Administrator – Calibration & Maintenance Location: Bolton Want to make an application Make sure your CV is up to date, then read the following job specs carefully before applying. Contract: 12 Month Contract Rate: £16.50 – £18.00 per hour Morson are recruiting on behalf of a leading Aerospace and Defence organisation for a Technical Administrator to join the Calibration & Maintenance Team at their state-of-the-art xrnqpay manufacturing facility in Bolton. This is an excellent opportunity to support the management of...

CNC Turner Jobs Mazak CNC Lathe Operator | Aerospace Engineering | Permanent Role Is this the next step in your career Find out if you are the right candidate by reading through the complete overview below. Skilled CNC Turner (Mazak / Mazatrol) Aerospace & Precision Engineering Our client, a world-class engineering and aerospace manufacturing company, is actively recruiting an experienced CNC Turner / Mazak CNC Lathe Operator to join their high-performing precision engineering team. If you have experience setting and operating Mazak Quick Turn or Nexus series CNC lathes using Mazatrol controls, this is an excellent opportunity to secure a permanent role with competitive pay and outstanding career progression. Key Responsibilities CNC Turner / Mazak Programmer • Set and operateMazak CNC lathes (Quick Turn & Nexus series), • Program and edit usingMazatrol controls, • Interpret detailedengineering drawings and GD&T specifications, • Conductfirst-off inspectionsand maintain strict quality standards, • Optimise tooling, cutting parameters, and machining efficiency, • Work collaboratively with production and quality teams, • Proven experience as aCNC Turner in aerospace or precision engineering, • Strong Mazatrol programming andmulti-axis machiningcapability, • Knowledge ofAS9100D and ISO 9001 quality standards, • Confident using precision measuring equipment:, • Micrometres, • Vernier callipers, • CMM equipment, • Competitive salary (dependent on experience), • Generous annual leave entitlement, • Access to exclusive retail discount schemes, • Modern, purpose-built manufacturing facilities, • Free on-site parking, • Discounted gym membership, • Structured career development opportunities, • Cycle to Work scheme, • Monday Thursday: 8:00am 4:30pm Apply Now CNC Turner / Mazak Lathe Operator This is apermanent CNC Turner job opportunitywith a leading engineering firm offering long-term career progression in aerospace manufacturing. xrnqpay To apply, please forward your CV in Word format today.

A leading defense and aerospace company in Bolton is seeking an experienced Manufacturing Engineer for a 12-month contract. Responsibilities include compiling manufacturing instructions and supporting the validation process.

This role is an excellent opportunity to grow with a market-leading defence and aerospace company. A leading recruitment agency is looking for an experienced Manufacturing Engineer for a 12-month contract based in Bolton, offering £35 per hour. You will be involved in creating manufacturing instruc

As the Production Test Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. Engineering, Manufacturing, and Production. Are you an experienced Test Engineer?.

World Class Defence Organisation based in Bolton, Lancashire is currently looking to recruit a Production / Manufacturing Controller subcontractor on an initial 12 month contract. This role is ideally looking for a candidate with a strong Lineside Production background. The department welcomes applications from candidates who may currently hold titles such as Production Controller, Production Coordinator, Material Controller, Production Planner, Manufacturing Coordinator or Shop Floor Controller etc. Candidates with experience supporting shop floor operations, managing production orders, controlling materials or Work in Progress (WIP), and working closely with manufacturing teams to ensure materials are available to support production schedules are particularly encouraged to apply. Hourly Rate: £24.78ph, after 12 weeks the rate increases to £26.12ph. Overtime hours (over 37 hours) are at normal hourly rate plus 50% Overtime Rate: Hours worked over 37 hours per week, are worked at the Overtime rate of time and a half. Contract Duration: 12 Months (initially and then ongoing and long-term thereafter) Job Description: Line Side Manufacturing Controller is required to support production operations within a fast-paced manufacturing environment. The successful candidate will ensure that materials, components, and production kits are available at the point of use to maintain uninterrupted manufacturing flow. Working closely with production, stores, and planning teams, the Line Side Manufacturing Controller will be responsible for managing material availability, work order control, and line-side inventory to ensure the efficient build and delivery of products. Key Responsibilities Ensure all materials and components are available line-side to support production schedules. Control and manage manufacturing orders and production documentation within the ERP system (e.g., SAP). Monitor material shortages and escalate issues to relevant teams to prevent disruption to production. Liaise with stores, planning, procurement, and production teams to resolve supply issues. Manage and maintain line-side stock locations and material flow. Support the creation and control of production kits to ensure build readiness. Track Work In Progress (WIP) and support production build requirements. Ensure materials are issued correctly and recorded accurately within company systems. Assist with inventory checks and cycle counts where required. Support continuous improvement activities to enhance material flow and production efficiency. Maintain high standards of housekeeping, safety, and compliance within the manufacturing area. Key Skills & Experience Experience working within a manufacturing, production, or engineering environment. Strong understanding of material control, production support, or manufacturing logistics. Experience using ERP or MRP systems (SAP experience desirable). Ability to work closely with production teams in a fast-paced shop floor environment. Experience identifying and resolving material shortages or production issues. Good communication skills with the ability to liaise across multiple departments. Desirable Experience Previous experience as a Manufacturing Controller, Production Controller, or Material Controller. Experience within aerospace, defence, automotive, or complex manufacturing environments. Knowledge of lean manufacturing or continuous improvement principles. Experience working with production schedules or manufacturing planning teams

MERITUS are recruiting for a Supply Chain Manager to join our Defence client on an initial 6 month contract within their equipment's team in Bolton. SUPPLY CHAIN MANAGER - INSIDE IR35 - £50 PER HOUR - BOLTON, GREATER MANCHESTER - 6 MONTHS - SINGLE STAGE INTERVIEW PROCESS Overview of the Department An opportunity has arisen for a Supply Chain Manager to join an equipment-focused team. The successful candidate will use their experience and knowledge to support effective supplier performance, capability, and risk management. The team operates across multiple programmes within a dynamic environment, managing and implementing both established and emerging technologies. Responsibilities, Skills & Experience Required Strong internal and external assessment capabilities, including: Business maturity Planning and control Relationship management Manufacturing excellence Strong interpersonal skills with the ability to develop and expand professional networks Desirable: SC21 Practitioner experience Very good negotiating and influencing skills Results-oriented with a strong drive to succeed Excellent communication skills, with the ability to: Communicate verbally Communicate in writing Present at all levels of the business Experience & Capability Ideally degree-qualified (or equivalent) Supply Chain professional with experience working internationally in high-technology environments Experience in supply chain management within: Aerospace Defence Manufacturing Proven ability to: Improve supplier performance (delivery and quality) using appropriate tools and lean methodologies Manage a portfolio of suppliers on a day-to-day basis, including performance reporting and supply chain risk management Assess supplier capability against delivery requirements, including current and future state analysis Create and validate process flows, conduct lead time analysis, and identify capacity bottlenecks, yield, resources, and sub-tier mapping to build an overall supplier view Apply structured problem-solving techniques (e.g. DMAIC: Define, Measure, Analyse, Improve, Control) to conduct root cause analysis and implement improvement plans Identify, escalate, and mitigate supply chain risks, managing them through to resolution Conduct analysis and deliver executive-level summaries

Are you looking for a new and exciting challenge, with a forward-thinking organisation within an advanced engineering sector? An established industry expert and has two vacancies for a Toolmaker/Fitter working at our manufacturing facility in Atherton. About us We have successfully supplied to the Aerospace industry for over 50 years. We are currently on track to achieve our strong growth plans and we pride ourselves on delivering right first-time solutions and going the extra mile to delight our customers. This is a great opportunity to join a reputable business with a strong set of core values in a friendly supportive environment. We have a strong focus on developing our people with the potential to further your career. Our salaries are competitive and we also offer a generous holiday entitlement of 33 days inclusive of bank holidays. About the Opportunity We are currently recruiting a Toolmaker/Fitter based at one of our bespoke Engineering facilities in Atherton Manchester. As a Toolmaker/Fitter, you will be responsible for the manufacture and assembly of Jigs & Fixtures for the Aerospace & Nuclear Industry. Main Duties: Manufacture and assembly of Jigs and fixtures. Occasional offsite work both in the UK and Overseas Essential Skills: Familiar with Toolroom Machinery and a good understanding of Engineering Drawings. Desired Skills: Assembly/Fitting skills with good attention to detail. Desired Experience: Aerospace experience beneficial but not essential. What we offer: Competitive salary. Generous annual leave entitlement. Exciting benefits package with access to discounts from leading retailers. Purpose built sites with free parking. Discounted gym membership. Excellent career development opportunities available. Diversity and Inclusion: We are committed to creating an inclusive environment where our employees can reach their full potential. We welcome applications from candidates from a diverse range of backgrounds in particular groups who are currently under represented in our sector. All our roles require the need to obtain pre-employment security screening checks including referencing. If this sounds like the ideal opportunity for you, then we'd love to hear from you. LMIND

Business Development Executive | Pilsworth, Bury | Up to £35,(Apply online only) DOE & Benefits Ready to launch your career in sales with a thriving UK manufacturer? At Ibex Marina Ropes, we don’t just make ropes — we engineer high-performance solutions used across Military, Aerospace, Marine Safety, and Outdoor industries. We’re a financially strong, privately owned British manufacturer with a proud heritage and a bold future. Having recently moved into a brand-new, state-of-the-art production facility, we’re investing in growth — and we want ambitious people to grow with us. Whether you’re a graduate looking for your first big opportunity or someone ready to take the next step in sales, this is your chance to make a real impact. Key Responsibilities of the Business Development Executive: This is not a passive sales role — you’ll be right at the heart of the action. You’ll: Identify and pursue new business opportunities Reach out, pitch, and convert prospects into customers Build strong, lasting relationships with clients Manage quotations and keep deals moving forward daily Work with marketing on targeted prospecting campaigns Liaise closely with production to ensure smooth order delivery Keep CRM systems up to date and organised Support both new business growth AND customer retention What we’re looking for We’re after someone who brings energy, drive, and initiative. You’ll thrive here if you are: Highly organised and proactive Commercially aware with a natural sales instinct Confident communicating with customers and teams Tech-savvy (comfortable with Microsoft tools and CRM systems) Experienced or interested in digital channels (website/SEO/social media) Hands-on, adaptable, and not afraid to roll up your sleeves A self-starter who can take ownership and make things happen What’s in it for you? Competitive salary (£24k–£35k DOE) Pension scheme 28 days holiday (including bank holidays) Huge growth potential in untapped markets Real opportunity to shape your role and progression Work in a specialist, niche manufacturing sector Join a friendly, close-knit team Modern offices in a brand-new facility Free on-site parking Location & Hours Monday to Friday: 08:30 – 17:00 Based in Pilsworth, Bury (near M66 Junction 3) Occasional travel for customer visits and trade shows Flexibility required for occasional out-of-hours business needs Please note: Due to location, you’ll need your own transport. Why Join? This is more than just a job — it’s a chance to: Be part of a stable, growing UK manufacturer Work with cutting-edge production in traditional industry Build a long-term career in sales and business development Make a tangible impact from day one What’s Next? If you’re ready to help drive the next phase of growth at Ibex Marina Ropes, we want to hear from you. APPLY NOW for immediate consideration

World Class Defence Organisation based in Bolton is currently looking to recruit an Electrical Wiring Operator on an initial 12 month contract and then ongoing and long-term thereafter. Contract Duration: 12 Months (initially and then ongoing thereafter) Hourly Rate: Hourly Rate: £28.35ph for the first 12 weeks and then £29.70 after week 12 (Umbrella). Overtime Rates of 'time and a half' for all hours worked over 37 hours per week. Electrical Wiring Operator Job Description: An exciting opportunity for a Skilled Electrical Wiring Operator to join our Calibration and Maintenance team for a 12-month period in a fast-paced but friendly and inclusive Manufacturing environment. We are seeking a Skilled Wire Operator to join our Calibration & Maintenance Team, to fault diagnose and repair bespoke cabling to drawing specifications. Fault finding and subsequent repair of cable assemblies. Carry out surface mount repair on CCAs. Maintain and repair test/measuring equipment to component level. PAT testing across the manufacturing site. Interrogate drawings during fault finding activities. Safety systems testing of Test & Measuring equipment in line with documented procedures. Provide Technical support to facilitate the efficient servicing of STTE to enable production testing of hardware and repair phases of the contract. Maintain excellent workspace husbandry disciplines. Maintain a high degree of tool control and FOD practices. Assist with maintenance of manufacturing aids as and when required. What we're looking for from you: All three of the below are required: Electrical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard) Electrical Engineering / Manufacturing Level 3 academic qualification (ONC, diploma, etc.) Electrical Engineering / Manufacturing Level 3 vocational qualification (NVQ) *Not required if a L3 apprenticeship standard has been achieved IPC 620 & Dynamic Cabling certified/ trained preferred. Possess experience in electrical wiring and assembly. Previous experience in the aerospace or defence industry would be desirable

Are you looking for a new and exciting challenge, with a forward-thinking organisation within an advanced engineering sector? The Hyde Group are established industry experts and has a vacancy for a CNC Miller working at our manufacturing facility in Atherton. About us We have successfully supplied to the Aerospace industry for over 50 years. We are currently on track to achieve our strong growth plans and we pride ourselves on delivering right first-time solutions and going the extra mile to delight our customers. This is a great opportunity to join a reputable business with a strong set of core values in a friendly supportive environment. We have a strong focus on developing our people with the potential to further your career. Our salaries are competitive and we also offer a generous holiday entitlement of 33 days inclusive of bank holidays. About the opportunity As a CNC Miller you will have experience of operating a range of CNC Milling machines. It is essential that you are able to set and operate CNC Milling Machines that operate Siemenscontrols. Previous experience of working on Multi Pallet machines would be of benefit. Ideally you will also have experience of machining soft metals, primarily Aluminium and stainless steel. Experience of working in the Scientific industry manufacturing precision parts would be of benefit. Naturally you will be a time served apprentice with a recognized qualification such as BTEC/City and Guilds. What we offer Competitive salary. Generous annual leave entitlement. Exciting benefits package with access to discounts from leading retailers. Purpose built sites with free parking. Discounted gym membership. Excellent career development opportunities available. Cycle to work scheme. Diversity and Inclusion The Hyde Group are committed to creating an inclusive environment where our employees can reach their full potential. We welcome applications from candidates from a diverse range of backgrounds in particular groups who are currently under represented in our sector. All our roles require the need to obtain pre-employment security screening checks including referencing. If this sounds like the ideal opportunity for you, then wed love to hear from you. TPBN1_UKTJ

GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries.

You'll be joining a quality-driven manufacturing environment with stable day-shift hours and an early Friday finish, where your ability to interpret engineering drawings, co.

GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries.