Offres c programming à AldershotCréer des alertes d'emploi

This consists in : • Developing unit tests for validating the integration of the different hardware blocks of the LTE/NR modem, • Developing unit tests for validating the DSP based firmware functions of the embedded LTE/NR low-level physical layer, • Building the test framework to automate non-regression tests, • Write detailed test plans and reports, • The tests will run on an emulation hardware platform (Cadence Palladium) REQUIRED SKILLS & EXPERIENCE • Good programming skills in python and embedded C/C++, • Knowledge of SoC architecture (CPU, Cache, Memories, DMAs, NoC), • Strong experience with embedded systems, ASIC oriented (knowledge of hardware and embedded software development, low level drivers), • Used to work in a Linux environment, • Knowledge in LTE/NR physical layer and signal processing is a plus, • Control version systems: GIT PROFILE • Highly motivated, self-starter, autonomous, • Team oriented, with ability to work well in multicultural environment, • Ability to work closely with other teams, • Excellent written and oral communications skills, • Fast learning capabilities, • Fluent English

Redline has been retained by a leading process instrumentation manufacturer who are looking for a Electronics Design Engineer to join their R&D team based in Surrey. Due to significant growth, they are seeking an Electronics Design Engineer to be responsible for the design and development of analogue and digital circuit design across new and existing products, going into a variety of regulated industries. You will be involved with PCB design, prototyping, test and validation and software interface. The nature of the industry and products will require someone who is a British Citizen. Key skills and experience for Electronics Design Engineer, based in Surrey: Proven experience within a senior electronics design role - mentor or managed small teams Mixed signal design within a regulated industry i.E. Defence, Aerospace, Medical, Automotive etc. Degree qualified in a related Electronics discipline Circuit and PCB design C Software programming Excellent verbal and written communication skills This is an exciting opportunity to join a growing company who can offer the opportunity for career progression and personal development. To apply for this Electronics Design Engineer job, based in Surrey, please send your CV to (url removed), or for more information contact Ricky Wilcocks on (phone number removed) or (phone number removed)...

Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. What you will be part of: Explore a wealth of possibilities. Take on challenges, create smart inventions, and grow beyond. This is a place for curious minds, brave pioneers, and everyone in between. Together, we achieve the extraordinary, each bringing our unique perspectives. Your part matters. Saab is a leading defence and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 26,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations. Read more about us ___. The Role: This role will be a part of our Saab Seaeye business in Fareham. In this role you will take responsibility for the full-lifecycle design and development of bespoke power conversion and transmission solutions in line with the company's business needs through innovation, creativity and professionalism. As Lead Engineer you will act as Technical Authority for concurrent power projects: from in-house designs to outsourced specification and management. Key Responsibilities: The role seeks an engineer with excellent knowledge of power architectures, transmission, conversion and distribution, whilst having an appreciation for the real-world subtleties involved in creating robust and reliable power systems. You may be working on anything from large-scale power conversion products, efficient cabled transmission designs all the way through to motor drives and low voltage converters. Our voltages range from 24V to 5000V with powers from 500W to 250kW. You will be responsible for the successful design, implementation and delivery into our products. This may include technically leading small multi-disciplinary teams and therefore the candidate must show an aptitude for directing and coordinating project activities and have strong communication/interpersonal skills. A product-focussed mindset is essential: taking a view across the different engineering disciplines to deliver the most appropriate solution. Our products provide unique challenges in designing non-conventional solutions which can meet size, weight and efficiency demands. Qualifications and Skills: Essential: • Significant Experience in Power Electronics, • Full-lifecycle experience: from concept to tested solution, • Self-starter: taking the lead and having a proactive mindset, • Excellent theoretical knowledge backed up by proven hands-on experience, • Proven knowledge of power transmission: AC and DC, applied to multi-km cabled solutions, • Proven Knowledge of DC converter topologies: Buck/Boost/Flyback/LLC/Full-Bridge, • Proven Knowledge of AC converter techniques: single phase/multiphase, power factor correction, • Experience of power converter product design AC-DC, DC-DC and DC-AC inverters, • Experience working with power switching devices: MOSFET, IGBT, SiCFET, GaNFET and associated drive circuitry, • Experience working with voltages up to 5kV and multi-kW powers, • Experience in designing or specifying custom transformer and magnetic components, • Experience using modelling and simulation packages, • Experience in both digital and analogue design concepts, • Experience of filter design and implementation, • Experience designing/specifying control systems for power conversion, • Knowledge of thermal management techniques, • Knowledge of design-for-compliance, • Experience developing requirements specifications and test procedures, • High Voltage Experience up to 5kV, • Thermal modelling experience, • Motor design principles and control techniques

Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. The Role: This role will be a part of our Saab Seaeye business in Fareham. This can be a 12 month FTC. In this role you will take responsibility for the full-lifecycle design and development of bespoke power conversion and transmission solutions in line with the company's business needs through innovation, creativity and professionalism. As Lead Engineer you will act as Technical Authority for concurrent power projects: from in-house designs to outsourced specification and management. Key Responsibilities: The role seeks an engineer with excellent knowledge of power architectures, transmission, conversion and distribution, whilst having an appreciation for the real-world subtleties involved in creating robust and reliable power systems. You may be working on anything from large-scale power conversion products, efficient cabled transmission designs all the way through to motor drives and low voltage converters. Our voltages range from 24V to 5000V with powers from 500W to 250kW. You will be responsible for the successful design, implementation and delivery into our products. This may include technically leading small multi-disciplinary teams and therefore the candidate must show an aptitude for directing and coordinating project activities and have strong communication/interpersonal skills. A product-focussed mindset is essential: taking a view across the different engineering disciplines to deliver the most appropriate solution. Our products provide unique challenges in designing non-conventional solutions which can meet size, weight and efficiency demands. Qualifications and Skills: Essential: • Significant Experience in Power Electronics, • Full-lifecycle experience: from concept to tested solution, • Self-starter: taking the lead and having a proactive mindset, • Excellent theoretical knowledge backed up by proven hands-on experience, • Proven knowledge of power transmission: AC and DC, applied to multi-km cabled solutions, • Proven Knowledge of DC converter topologies: Buck/Boost/Flyback/LLC/Full-Bridge, • Proven Knowledge of AC converter techniques: single phase/multiphase, power factor correction, • Experience of power converter product design AC-DC, DC-DC and DC-AC inverters, • Experience working with power switching devices: MOSFET, IGBT, SiCFET, GaNFET and associated drive circuitry, • Experience working with voltages up to 5kV and multi-kW powers, • Experience in designing or specifying custom transformer and magnetic components, • Experience using modelling and simulation packages, • Experience in both digital and analogue design concepts, • Experience of filter design and implementation, • Experience designing/specifying control systems for power conversion, • Knowledge of thermal management techniques, • Knowledge of design-for-compliance, • Experience developing requirements specifications and test procedures, • High Voltage Experience up to 5kV, • Thermal modelling experience, • Motor design principles and control techniques

Based in Aldershot, Hampshire, our client offers high-quality precision prototyping CNC machining and assembly services to the UK market. They specialise in the Aerospace, Defence, Formula 1 and Petrochemical industries. Their key strengths include computer-aided machining, rapid prototyping, and 5 axis work. Offering a full range of services, with the ability to machine directly from 3D CAD files to finite tolerances backed by full CMM inspection through to finishing, assembly, and despatch. They use the latest, state of the art equipment and software to ensure machining and manufacturing departments are operating at the highest standards. JOB ROLE: CNC Turner JOB TYPE: Permanent OPENING HOURS: Monday to Thursday (7 AM until 5:30 PM) & Friday (7 AM until 1 PM) WORKING HOURS: 40 hours per week Flexible (As long as you complete your 40 hours within the opening hours). OVERTIME: Overtime is consistently available and is paid at time-and-a-half. DUTIES & RESPONSIBILITIES Programming, setting, and running Doosan Puma CNC lathe, and Goodways CNC lathes, using Fanuc controls, with live tooling. Producing precision machined components to tight tolerances, for a range of industries, including Aerospace, Defence, Formula 1, and more. Working from detailed technical engineering drawings. Ensure all manufactured components meet the highest standards of quality and precision. Work closely with the engineering team to optimise processes and meet production deadlines. Troubleshoot and resolve any technical issues that may arise during machining. REQUIREMENTS Previous experience in a CNC turning position within a precision machining environment is required. Previous experience programming using Fanuc controls is required Ideally working on3 axis machinery with live tooling C axis (X,Z,C Previous experience with live tooling is desirable. Strong communication skills and the ability to collaborate effectively with colleagues. Commitment to adhering to workplace safety standards and practices. Demonstrated ability to work with precision and maintain high-quality standards. HOLIDAY ENTITLEMENT: 26 days per year + all bank holidays (35 days in total) + Christmas shutdown. TPBN1_UKTJ

Senior Software Engineer - Up to £200,000 - Cambridge Qualifications, skills, and all relevant experience needed for this role can be found in the full description below. Title: Senior Software Engineer Company: Proprietary HFT Location: Cambridge Pay: Up to £200,000 with huge potential to increase Company: A proprietary high-frequency trading firm in Cambridge, specialising in the research and development of ultra-low-latency automated trading strategies, are looking for a Software Engineer with a demonstrable background of delivering complex projects from a concept through to delivery. It is important that you have been involved in the entire software development life cycle (SDLC), as this dynamic role will require you to rapidly prototype - and ultimately move into production - highly complex, reliable and performant systems - oftentimes from scratch. Role: • Develop ultra-low-latency trading systems C++ or Rust code, • Work closely with a close-knit team of Software Developers and Quant Traders, • Build mission-critical research systems from scratch, • This is an early-stage hire for the team. Much of your work will be completely greenfield. You will be involved in the designing, prototyping, testing and productionising new software., • Providing support to a small number of junior engineers, • Holistic approach to problem solving; you are able to see the 'bigger picture' of your work, • Exceptional systems knowledge, • Exceptional Linux knowledge, • Strong networking knowledge (TCP/IP), • Strong concurrent programming ability (C++orRust)

The ideal candidate should have strong programming skills in Python and embedded C/C++, as well as a solid understanding of SoC architecture and embedded systems.

Senior System Validation Engineer. System validation activity including Phy, HW and SW validation. Experience in developing automation in validation environments – Proven experience in a programming language (Python / C# / C++ etc.

We are seeking mid-level to experienced Embedded Software Engineers to join a dynamic team designing and developing innovative, high-performance software systems. This is a hands-on role, offering the opportunity to work on cutting-edge technology and create solutions that prioritise reliability, scalability, and technical excellence. What you’ll do Develop complex embedded software systems as an individual contributor. Collaborate with cross-functional teams to define functional and non-functional requirements. Create low-level designs, implement software, and perform testing in line with defined architecture. Support adherence to coding standards, best practices, and continuous improvement initiatives. Provide guidance and mentorship to junior engineers. Contribute to technical reviews, bids & proposals, budget and schedule discussions, and customer engagement activities. What we’re looking for Experience in C++, specifically embedded software development. Modern C++ (2017 or newer). Experience with other programming languages such as Python, C#, Rust, or C. Familiarity with version control systems (e.g., Git/GitLab). Strong object-oriented design and programming skills. Experience with development methodologies such as Agile, Waterfall, or V-model. Degree or equivalent experience in Computer Science, Software Engineering, or a related field. Sole British nationals (due to security cleraance requirements). Benefits Competitive salary with sign-on bonus. Flexible or part-time working arrangements on request. Relocation support available. Half-day finish on Fridays. 25 days holiday (plus bank holidays), increasing with service, with option to buy/sell. Private medical insurance (optional family cover). Life assurance and group income protection. Flexible extras including healthcare cash plan, dental insurance, gym membership, cycle-to-work scheme, and electric vehicle scheme. Employee assistance program for mental health and wellbeing support. TT

Our client, a leader in the defence and security sector, is currently seeking a Senior Software Engineer with advanced security clearance to join their cutting-edge team. This permanent role offers an exciting opportunity to work on innovative solutions that redefine defence technology. Key Responsibilities: Design, implement and test solutions to complex customer problems across the development lifecycle Develop software for a range of areas including bare-metal MCU, signal processing, Embedded Linux, and GUI development on Windows, Linux, and mobile platforms Utilise various programming languages such as Rust, C/C++, Python, and web development frameworks Work with FPGAs, electronic design, and mechanical design Collaborate closely with team members in an agile environment to balance requirements, schedule, and cost Produce comprehensive documentation from requirements to design and testing materials to support developments Ensure compliance with Government regulations by managing the security of information as defined in the Security manual Job Requirements: Degree in an engineering, mathematical, or science-based subject or equivalent experience Experience in at least one of the following areas: Embedded Linux application, kernel, and/or driver development C/C++ or Rust programming Proficiency in best practice software development processes/lifecycles Experience in Object-Oriented Design and Design Patterns Knowledge of software testing and design for test Desirable Experience, Skills and Qualifications: GUI development frameworks such as eGUI, GTK, Tauri Yocto, Petalinux, and uBoot Python, Jupyter Notebooks, or Matlab Web development languages (HTML, Javascript, Typescript, React) IOS/Android development Experience with communications protocols - TCP, QUIC, WiFi Knowledge of GNU Radio and Software Defined Radios Experience with FPGAs and exposure to hardware UML design and tools such as Enterprise Architect Security Clearance: Must hold DV (UKDV or MOD DV) security clearance If you are an experienced software engineer seeking a challenging role within the defence sector, we would love to hear from you. Apply now to join our client's dynamic and innovative team

Are you a CNC Operator, Setter, Programmer or similar looking for the excellent opportunity to receive further training into programming software's such as FANCUC and CAD / CAM whilst also maintaining a great work-life balance in this Monday-Friday role, working within a close-knit team of experts w

CNC Turner (CAD/CAM Programming).

Job Description CNC Programming Manufacturing Engineer Bristol Onsite Staff Role Why join Rolls-Royce? At Rolls-Royce we are proud to be a business that has truly helped to shape the modern world and are committed to always being a force for progress; powering, protecting and connecting people every

CNC Machinist (Online Programming). Are you a CNC Machinist with Online Programming experience? On offer is a local, days-based role within a long-established, stable company who pride themselves on their family culture, offering a good work life balance and unlimited overtime to increase your earni

Research Programmer Bright Purple is working in close partnership with one of the worlds most innovative tech companies.A household name, their products are used by hundreds of millions of people.We are looking to recruit an exceptional Research Engineer for their new Edinburgh R+D centre which fo

CNC Miller (Programming) £19 - £21 per hour (£41,000 - £46,000 OTE) + Optional Overtime + Early Finish Friday + Birthday Off + Progression + BenefitsWolverhamptonAre you a CNC Miller with experience in offline programming in Haas or Fanuc controls, looking to join a well-established manufacturer

A prestigious university in Greater London is seeking a dedicated Lecturer in Artificial Intelligence, Programming and Software Development to design and deliver a pioneering MSc program. This full-time, hybrid role requires a PhD and expertise in AI programming.

CNC Miller (Offline Programming) £37,500 - £41,500 (£44,000 - £49,000 OTE) + Optional Overtime + Early Finish Friday + Birthday Off + Progression + Benefits Wolverhampton Are you a CNC Miller with experience in offline programming in Haas or Fanuc controls, looking to join a well-established

Digital Trading & Programming Manager. Act as the central digital liaison across broadcast programming, merchandising, marketing, social and content teams, translating business priorities into clear, timely digital execution. Manage, coach and develop a digital programming team, setting clear priori

CNC Turner (Fanuc / Programming)£18.

A global technology and logistics company in the UK is seeking a Regional AV Programming Lead to oversee and manage a team of AV programmers. Responsibilities include leading projects, establishing programming standards, and providing mentorship. The ideal candidate will have a bachelor's degree in

CNC Turner (Training on Programming) £34,500 - £36,500 + Overtime (OTE £50,000) + Monday to Friday + Days Based MotherwellAre you a CNC Turner with setting and operating experience, looking for full training on programming whilst working on state-of-the-art machinery?Are you looking to join a lon

The ideal candidate should be comfortable with extreme programming practices such as TDD, DDD, Red-Green refactoring, and pair programming. Strong skills in extreme programming techniques including pair programming, TDD, DDD, and refactoring. Senior Software Engineer (Extreme Programming/XP) - £540

The Administrative Coordinator will provide comprehensive Executive Assistant support to the SVP of Programming and programming team, ensuring the smooth running of day‑to‑day activities and helping to maintain momentum across key priorities. Stage- Interview with SVP of Programming. Assist in p

CNC Setter / Operator (Training on Programming) £14p/hr - £20phr (Year 1 OTE up to £45,000) + Days Based + Monday to Friday + Early Finish on a Friday + Training on Programming + Progression + Unlimited Overtime + Company Benefits Gillingham - Commutable from Yeovil, Sherborne, Wincanton, Shaft

This full-time role involves designing and delivering an online MSc programme in Applied AI, focusing on practical programming and AI system development.

The Digital Trading & Programming Manager supports QVC UK, and leads the programming, trading and optimisation of QVC UK's digital storefront across web, app and key digital entry points, ensuring a cohesive, high‑performing customer journey that delivers against commercial and engagement goals. A

Expert in SAS or R programming, including the development and validation of deliverables within a Statistical Programming environment, and the creation of advanced MACROs and/or functions. The Associate Director, Statistical Programming, is responsible for all statistical programming aspects of one

A leading retail company in the United Kingdom is seeking a Digital Trading & Programming Manager to lead the digital storefront's programming and trading strategies.

A leading telecommunications company seeks a Software Engineer to develop innovative JVM applications within a cross-functional team.The ideal candidate will have extensive experience in Java or Kotlin and be familiar with Test Driven Development and Agile practices.This role offers opportunities fo

A leading arts academy in the UK is looking for an associate lecturer to teach Games Design, Development, and Programming.

A leading recruitment consultancy is seeking an experienced Project Programmer / Planner to lead their planning function from their London headquarters.The ideal candidate will have extensive experience in developing project programmes and implementation plans, alongside skills in progress reporting

Room 700, Rutland Building, County Hall, Leicester Road, Glenfield, LE3 8RA.This role does not meet the minimum salary requirements for sponsorship; therefore you must already have the right to work in the UK in order to apply.Are you looking for a rewarding career where you can make a difference?.D

A leading international built asset consultancy in London is seeking an experienced Project Programmer / Planner to lead their planning function amid business growth.The ideal candidate will have extensive experience in developing project programmes, implementation plans, and progress reporting acro

Events & Programming Manager - Wellness Members’ Club, Central London. Develop and deliver a year-round events and programming calendar. Continuously refine programming based on member feedback and industry trends.

You will teach Games Design, Development and Programming to students studying within the Academy of Contemporary Music.

Provide mentorship and support to other statistical programming staff. We’re looking for a Senior Research Scientist on our Statistical Programming team who is well-versed in R and real-world evidence to help us accomplish our mission to improve and extend lives by learning from the experience of

Demonstrated experience in events, programming, or community within wellness, hospitality, or a luxury environment. Events & Programming Manager - Wellness Members’ Club, Central London. Develop and deliver a year-round events and programming calendar.

A leading retail company is seeking a Digital Trading & Programming Manager to oversee the digital trading and programming of its online storefront. You will manage the content calendar, optimize customer engagement, and lead a digital programming team while collaborating with various departments.

A renowned pharmaceutical company in Greater London is looking for an Associate Director of Statistical Programming to lead statistical programming activities for multiple clinical trials. The role requires extensive experience in managing teams and deep knowledge of SAS or R programming.

A leading events organization based in Greater London is seeking an Administrative Coordinator to support the SVP of Programming and the programming team.