Electrical industry jobs in AthertonCreate job alerts

Electronics Engineer 12 month contract Based in Bolton Offering circa £35ph Inside IR35 Are you an experienced Electronics Engineer? Do you have experience in Calibration and Maintenance? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Electronics Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: • Servicing Electrical and Electronic Test Equipment, including Special to Type Test Equipment (STTE), • Fault finding and repair of test equipment, • Supporting routine calibrations, • Commissioning of Test Equipment, • Drift analysis, • Calibrate and support special to type factory test equipment using a range of technologies, DC to Microwave Your skillset may include: • HNC/HND in Electrical & Electronics Engineering, • Experience and knowledge in the calibration of test equipment and maintenance of test systems to component level, • Able to utilise instructions, handbooks, drawings, or specifications to provide technical advice/guidance, • Conduct measurements and repairs down to component level, • Good understanding of calibration principles and processes, • Able to mentor other or more junior staff, • Understanding of SAP, • Experience working on Environmental Chambers If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further!

Electrical Fitter 12 month contract Based in Bolton Offering £28.35ph Inside IR35 Are you an experienced Electrical Fitter? Do you hold Electrical Engineering or similar trade certificates? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Electrical Fitter, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: • Certify the product in line with Product Certification procedure, • Certify own work in line with company quality standards, • Maintain product certification and approval via regular audits, • Be fully conversant with all equipment, tools, and measuring instruments associated with the manufacturing cycle, • Ensure manufacturing build, inspection, and where relevant test times are met, • Check and complete all paperwork associated with the manufacturing data pack, • Maintain workmanship standards and product quality, • Ensure compliance with all associated procedures applicable to the manufacturing process Trade Certificates: Approved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship OR Vocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3 OR Vocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3 OR Vocational NVQ3 with Further Education, BTEC ONC/HNC Your skillset may include: • IPC 610 certified/ trained preferred, • Possess experience in electrical wiring and assembly, • Previous experience in the aerospace or defence industry would be desirable, • Manual handling training, • Lifting and slinging (including overhead cranes) training, • ESD training If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further!

Are you an experienced Electrical Fitter?.Do you hold Electrical Engineering or similar trade certificates?.Do you want to work with an industry-leading company?.If your answer to these is yes, then this could be the role for you!.As the Electrical Fitter, you will be working alongside a market-lead

We are seeking a Cofounding CTO with deep expertise in thermal systems, HVAC, or data-centre infrastructure to own the technology roadmap and lead the transition from late-stage prototype to global roll-out. The Opportunity As CTO and cofounder, you will: • Own the end-to-end technology strategy and roadmap, taking the product through first commercial deployments and iterative releases, • Lead R&D, engineering and product across:, • Thermal systems and psychrometrics, • Mechanical design and system packaging, • Controls, monitoring and software integration (DCIM / BMS) Build manufacturing and supply-chain readiness for scaled production, working with OEMs and key suppliers Ensure compliance with relevant data-centre, safety, performance and sustainability standards. Recruit, mentor and lead a high-performing, multi-disciplinary engineering team (mechanical, electrical, software) Partner closely with the CEO and board on customer engagement, pilots and strategic partnerships with data centres and integrators Act as the technical representative with customers, partners, investors, regulators and at industry events Ideal Background • Deep domain expertise in one or more of:, • Data-centre cooling / HVAC, • Data-centre infrastructure design, operation or integration Proven experience scaling hardware-led technology from prototype through: • Design for manufacture, • Certification and standards compliance, • Real-world deployment at scale, • Experience with controls, monitoring and software integration (BMS / DCIM / SCADA or similar), • Comfortable operating close to research environments and IP, • Strong leadership track record building and coaching engineering teams, • Clear communicator, able to explain complex thermodynamics to non-technical stakeholders Why Join? • Founder-level equity, • Direct impact on the future of sustainable computing infrastructure, • Join at a pivotal inflection point: final validation -> rapid commercial scaling, • Supportive board and investors with a clear commercial pathway

Dalkia Engineering - We are a leading provider of technical, engineering and energy solutions across the UK. We deliver complex projects with precision, innovation and a commitment to safety & sustainability. Our teams work across critical environments, supporting clients in healthcare, industrial, commercial & energy sectors What you'll be doing - Project Leadership • Lead Electrical building services from concept to completion., • Promote a strong safety culture., • Develop and review Electrical designs (HV/LV, lighting, small power, specialist and life‑safety systems)., • Monitor budgets and programmes, identifying risks and mitigation actions., • Oversee design quality and technical compliance., • Identify, assess, and manage project risks., • Work closely with clients to understand requirements and present solutions., • Stay up to date with industry developments., • Recommend improvements to engineering processes and methodologies. What you'll bring - Essential • IOSH, • CSCS, • 10+ years’ experience in Electrical building services engineering, • Strong knowledge of industry codes, standards, and regulations (HTM beneficial), • Proven project leadership experience, including budgeting and scheduling, • Excellent communication and interpersonal skills, • Strong team collaboration abilities Desirable • ONC/HNC/NVQ L3/L4 in Building Services, • Degree in Project Management or Engineering Diversity and Inclusion At Dalkia, we believe that a diverse and inclusive workforce is essential to driving innovation and achieving a sustainable energy future. We are committed to creating a workplace where everyone feels valued, respected, and empowered to thrive regardless of background, identity, or lived experience. We welcome applications from all individuals and are proud to be an equal opportunity employer. Together, we’re building a culture that reflects the communities we serve and supports the transition to a net-zero world.

Electrical Wiring Operator 12 month contract Based in Bolton Offering £28. Inside IR35 Do you hold an Electrical Apprenticeship to Level 3 NVQ or equivalent? Do you have experience in PAT Testing? Do you want to work with an industry-leading company? If your answers are yes to these, then

Inside IR35 Are you an experienced Electrical Fitter? Do you hold Electrical Engineering or similar trade certificates? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Electrical Fitter, you will be working alongs

Our client, a prestigious organisation in the Defence & Security sector, is seeking a talented Test Design Support Engineer to join their team in Bolton. A degree or equivalent industry experience in Electrical Engineering. Experience in designing products/systems and/or providing support during the

Inside IR35 Do you have experience as an Electrical Inspector? Do you hold Electrical/Electronics trade qualifications? Do you want to work with an industry-leading company? If your answers are yes to these, then this could be the role for you! As the Electrical Inspector, you will be working a

A degree or equivalent industry experience in Electrical Engineering Experience in designing products/systems and/or providing support during the manufacturing phase Proven experience in one or more of the following disciplines: Digital and Analogue electronics Power Electronics RF & Antenna Interco

??? Modular Cabin Refurbishment Operative ??? ?? Location: WN2, Wigan ?? Hours: Monday to Friday - 40 hours per week The Best Connection Bolton are delighted to be recruiting on behalf of our client, a global leader in modular accommodation solutions ??!! ?? The Role - Purpose You will be responsible for refurbishing, modernising, or fully renewing modular accommodation units , ensuring each cabin is restored to a high-quality, 'good-as-new' standard and ready for hire ?. ?? About Our Client Our client is the UK's leading provider of modular accommodation , with a strong global presence ??. They supply more buildings for hire than any other company in the industry, offering: Modular buildings for hire and sale Off-site permanent buildings Solutions for temporary, semi-permanent, and permanent use ??? Key Responsibilities We're looking for a practical, hands-on individual with strong general DIY skills who is flexible and willing to carry out a variety of tasks, including: ?? Manual preparation for painting ?? Basic plumbing work ?? Fitting windows and doors ?? General maintenance and repairs ?? Safe use of power tools ?? Removing and replacing flooring ?? Removing and fitting wall and ceiling panels ? Maintaining high-quality workmanship in line with customer expectations ?? What We're Looking For You should be semi-skilled or multi-skilled , with experience in one or more of the following: ?? Joinery ?? Plumbing ? Electrical work A positive attitude , strong attention to detail , and a commitment to quality are essential ??. ?? Apply Today! ?? Call: 01204 394 400 ?? Email your CV: ?? Don't miss out on this opportunity - apply now and join a leading name in modular accommodation! The Best Connection is acting as an Employment Business in relation to this vacancy. TPBN1_UKTJ

Vehicle Technician/ MOT Tester -Bolton Salary Up to £42,000 Basic + Bonus (up to £6,000) + Overtime DOE & Qualifications Days Monday Friday, 8:30am - 5pm, Saturdays on a rota Ref 29814 We have a new job vacancy available for a Vehicle Technician/ MOT Tester in Bolton. My client is one of the UK's leading main dealer groups in thearea and they're looking for an experienced Vehicle Technician/ MOT Tester wanting to join agreat team! This is a great opportunity for a Vehicle Technician/ MOT Tester looking to work for and alongside one of the best in the industry, so if youre on the lookout then apply now! Vehicle Technician / MOT Tester Benefits: Excellent Bonus Opportunities In house training opportunities for career progression Great pension scheme Company Discounts Vehicle Technician / MOT Tester Role: Carry out servicing and maintenance of all vehicles Electrical, mechanical, and hydraulic fault diagnosis and repair, this work may include warranty approved work in line with our brand parameters Department of Transport (MOT) testing duties (if qualified) Vehicle Technician / MOT Tester Requirements: Full UK driving license NVQ, IMI, ATA or City & Guilds level 3 ideally but we will also consider level 2 with a lot of experience (If youre a level 2 Vehicle Technician with main dealership experience then definitely apply!) Octane Recruitment Consultant Al-amin Abiru AAVT Octane Recruitmentis a specialist Automotive and Motor Trade recruitment agency, working with main dealerships, bodyshops, tyre management companies, parts distribution centres, independent garages, fleet operators, HGV companies, import centres and manufacturers across the UK. We recruit across the motor trade and related industries. TPBN1_UKTJ

Our client, a trusted partner to the UK Ministry of Defence, is looking for a skilled Electrical Wiring Operator to join the Calibration & Maintenance Team on a 12-month contract. This is an exciting chance to work in a dynamic, collaborative, and inclusive manufacturing environment where precision and innovation matter. In this role, youll be responsible for diagnosing faults and repairing bespoke cabling to exact drawing specifications , ensuring the highest standards of quality and reliability. If youre detail-oriented, technically skilled, and thrive in a fast-paced setting, wed love to hear from you. Key Responsibilities: Diagnose and repair cable assemblies to ensure optimal functionality. Perform surface-mount repairs on Circuit Card Assemblies (CCAs). Maintain and repair test and measurement equipment down to component level. Conduct Portable Appliance Testing (PAT) across the manufacturing site. Interpret technical drawings during fault-finding activities. Carry out safety system testing on test and measurement equipment in line with documented procedures. Provide technical support to enable efficient servicing of STTE for production testing and repair phases. Maintain a clean, organised workspace in line with best practices. Ensure strict tool control and adhere to Foreign Object Debris (FOD) prevention standards. Assist with the upkeep and maintenance of manufacturing aids as required. What do you need?: Essential Qualifications (All three required): Advanced Level or Level 3 Electrical Engineering / Manufacturing Apprenticeship Level 3 academic qualification in Electrical Engineering / Manufacturing (e.g., ONC, Diploma) Level 3 vocational qualification in Electrical Engineering / Manufacturing (e.g., NVQ) Note: This is not required if a Level 3 Apprenticeship Standard has been achieved. Preferred Skills & Experience: IPC 620 certification and Dynamic Cabling training (highly desirable) Proven experience in electrical wiring and assembly Previous experience within the aerospace or defence industry (advantageous) What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance : British Citizen or a Dual UK national with British citizenship. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This job is at our client's site in Bolton facility, one of the North West's leading manufacturing sites for at least 25 years. The facility offers showers and bike racks and is near the motorway, with a petrol station outside. Amenities like an onsite canteen. All employees get training and development opportunities. TPBN1_UKTJ

Job Title: Internal Sales Engineer Location: Farnworth, Bolton Salary: £36,000 - £42,000 per annum Job Type: Full time, Permanent Working Hours: 38 hours per week; Monday to Thursday 07:30 to 16:00 and Friday 07:30 to 12:50 About Us: Backer Heatrod is a leading UK manufacturer of electric heating elements and industrial heating solutions. As part of the global NIBE Element Group, we design and produce both standard and bespoke heating products for a wide range of industries including process, food & beverage, and chemical sectors. About the Role: The Internal Technical Sales Engineer is office-based. The role provides technical support, quotations, and customer service. It focuses on supporting internal sales operations, ensuring customer requirements are met efficiently, and contributing to account retention. This role does not involve visiting customer sites. Key Responsibilities: Directly manage business figures across multiple product portfolios in the UK. Develop and maintain customer accounts, building long-term technical and commercial relationships. Detect and support new business opportunities and market applications as part of internal sales efforts. Provide technical support throughout the sales cycle, including offers, contracts, and specifications. Participate in customer meetings, technical discussions, and presentations (remotely from the office). Collaborate closely with internal teams (Engineering and Operations) to ensure successful project delivery. Identify and monitor market trends, competitor activity, and emerging technologies to support internal sales strategy. Support tendering and bid preparation, including reviewing specifications, coordinating pricing, and responding to technical clarifications. Prepare and issue quotations accurately and maintain CRM records of all customer interactions. Assist in resolving customer queries, claims, and quality issues. Focus on customer retention and long-term relationship building. Contribute to continuous improvement initiatives within the sales function. Demonstrate strong numerical and analytical skills in handling orders, quotations, and reporting. Communicate effectively with customers, internal teams, and suppliers. About you: Essential Requirements: HNC or Degree in Engineering, Manufacturing, or a related technical discipline. Experience in customer-facing technical sales or internal sales support roles. Familiarity with ISO 9001 or other quality standards. Strong IT skills, including MS Office, CRM systems, and data reporting tools. Excellent communication and interpersonal skills to liaise with internal teams and customers. Numerical and analytical skills for interpreting technical specifications, quotations, and sales reporting. Commercial awareness and the ability to prioritise tasks and manage multiple projects simultaneously. Problem-solving mindset with attention to detail. Ability to work independently and collaboratively within a team environment. Organisational skills and accuracy in quotation preparation, order processing, and CRM maintenance. Desirable Requirements: Mechanical or Electrical engineering background. Experience in lean manufacturing or 5S. Knowledge of heating element industry. SolidWorks proficiency. Project management experience. Benefits: 25 days holiday plus bank holidays. Cash Health Plan and Employee Assistance Programme. Cycle to work scheme. Full training and support. Opportunities for career progression. Friendly and inclusive working environment. Auto enrolment pension scheme. On-site parking. Life Assurance Please Note: No agencies. Please click the APPLY button to send your CV and Cover Letter for this role. Candidates with the relevant experience or job titles of: Technical Sales Support, Technical Sales Engineer, Internal Sales, Sales Engineer, Mechanical Engineer, Electrical Sales Engineer, Manufacturing Engineer may also be considered for this role. TPBN1_UKTJ

World Class Defence Organisation is currently looking to recruit an Electrical Systems Engineer / Architect subcontractor on an initial 12 month contract. Your base site can either be from the companies Bristol, Stevenage or Bolton office. This role will be a hybrid position 3 days per week onsite and 2 days remote. Hourly Rate: £60 - £85 (Umbrella). Contract Duration: 6 Months initially and then ongoing and long-term thereafter. Missile Electronic Architect Job Description: Electrical Architects/Engineers are involved in all aspects of missile development, from the early concept studies to series production and in-service support. Its an excellent opportunity for someone wanting to build on their engineering experience. Responsibilities: You will be responsible for the electrical architecture and requirements for missiles and/or their associated launcher systems with duties including: Specifying/determining system electrical requirements interface definitions and characteristics between subsystems/equipment power architecture, including power budget and power profiles data communication and processingarchitecture requirements for EMC, bonding, grounding and screening signal safety, including routing of safety related signals Supporting test and fault-finding activities during compatibility checks, risk reduction, system proving/qualification and integration Reviewing and authoring reports, guidelines and processes Design assessments and analysis Working to defence/industry standards Attending and supporting design reviews Alternatively, acting as the Equipment Manager (RMO) for specific electrical/electronic equipment(s) that are part of a missile or launcher system you will: Project manage the equipment(s) on behalf of the project during development, qualification and manufacture Own the requirements on behalf of the project for the equipment(s) Produce Statement(s) of Work for the associated design authority for the equipment(s) Create and update plans showing activities for the equipment(s) Manage internal & external design authorities for delivery of the equipment(s) hardware, software and deliverables to schedule, cost, quality and performance Hold regular progress reviews with the design authority for the equipment(s) Review qualification verification evidence Track and find resolution to equipment non-compliances Attend and support design reviews Skillset/experience required: Technical experience required: electrical/electronics interface definitions knowledge of defence/industry standards, etc. degree level qualification in a related subject systems engineering writing reports Ideally this would be within a defence related background, however, experience within other engineering industries will also be considered. Experience within these other areas are also of interest but not essential: defence weapon systems power supplies actuators data communication sensors EMC Health Usage Monitoring Systems (HUMS) Model Based Engineering (MBE) TPBN1_UKTJ

Our client, who is a respected partner of the Ministry of Defence in the UK, are searching for an experienced Electrical Fitter Apprenticeship-Trained Professionals to join their team at the Bolton site. This role's primary duties involve manufacturing and testing activities within the electrical department. The ideal candidate will follow product certification procedures, maintain high standards of workmanship, and efficiently manage budgets and timelines to achieve project objectives. Key Responsibilities: Assemble and fit electrical components to drawings, specifications, and industry standards (IPC). Perform electrical wiring, soldering, and termination work with precision. Maintain compliance with ESD, safety, and handling protocols at all times. Use appropriate tools, jigs, and measuring instruments during assembly and inspection. Carry out self-checks and quality inspections to ensure defect-free builds. Complete and maintain product certification, approvals, and associated documentation. Collaborate with inspection, test, and engineering teams to resolve issues. Support continuous improvement in manufacturing processes and workflows. Adhere to strict defense/aerospace compliance, confidentiality, and export control requirements. Uphold safety, housekeeping, and professional standards on the manufacturing line. What do you need?: Electrical Assembly & Fitting: Proven experience in electrical wiring, fitting, and sub-assembly of components in a manufacturing environment. IPC-610 or IPC-620 Certification: Knowledge and adherence to IPC standards for electronic assemblies. ESD Awareness & Handling: Trained in Electrostatic Discharge (ESD) protection and safe component handling. Precision Workmanship: Ability to use magnifying glasses/microscopes for fine detail assembly and inspection. Tool Proficiency: Competent with hand tools, crimping tools, torque tools, and electrical measuring instruments. Product Certification & Documentation: Experience maintaining product certification, approvals, and build records. Manual Handling & Lifting: Trained in safe manual handling, lifting, and slinging procedures. Aerospace/Defense Experience (Preferred): Familiarity with quality, safety, and compliance standards in highly regulated industries. Attention to Quality & Standards: Conversant with inspection processes, quality checks, and conformance to engineering drawings/specs. Time & Process Management: Ability to meet manufacturing build, inspection, and test cycle times without compromising quality. Qualifications: Approved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship OR Vocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3 OR Vocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3 And Vocational NVQ3 with Further Education, BTEC ONC/HNC What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This job is at our client's site in Bolton facility, one of the North West's leading manufacturing sites for at least 25 years. The facility offers showers and bike racks and is near the motorway, with a petrol station outside. Amenities like an onsite canteen. All employees get training and development opportunities. TPBN1_UKTJ

Company description: At Warburtons, family is at the heart of our business. Five generations'? worth of expertise that goes into making our bakery products allows us to continue a tradition of baking inherited over the past 150 years. Warburtons is the largest bakery brand in the UK, but that doesn't allow us to rest on our laurels. We are pioneers of the industry and ambitious market leaders, always seeking to challenge ourselves and convention. It is part of our philosophy to provide honest good sense on issues of health and well-being, helping the whole family to enjoy our products as part of a healthy, balanced diet, through a range of products to suit all meal occasions, lifestyles and tastes. Job description: Job Title: Engineering Team Leader Location: Bolton Contract: Permanent Working pattern: 4 on 4 off Salary: Up to £60,000 Are you an Engineering Team Leader or Lead Engineer with experience of working in a manufacturing environment and looking to progress or up for a new challenge? Due to continued growth and investment in our Engineering-led manufacturing sites, we have an opportunity for an Engineering Team Leader to support our bakery in Bolton. As a key part of our Engineering team, you'll engage and motivate a skilled team of engineers, utilising root cause analysis to identify and prioritise corrective, preventative, predictive and mitigating actions. The Recipe At our Bakery here in Bolton, the team are dedicated to delivering unbeatable quality in a safe manner with highly reliable equipment. We are proud to be leading and developing a collaborative, creative and responsive team at the cutting edge of engineering innovation. In this role you will lead, motivate, and manage a team of multi skilled engineers to drive a culture that delivers plant reliability, product quality, and safety in line with company standards. Working with the Engineering Manager you will have accountability for delivering the engineering strategy, via planned, corrective and reactive maintenance work. The Role Reporting to the Engineering Manager youll provide both hands-on technical support and day-to-day leadership, driving a culture of safety, teamwork, and continuous improvement. Lead, coach, and develop a team of engineers, ensuring high standards of performance, engagement, and professional development. Coordinate and deliver planned, preventative, and reactive maintenance to minimise downtime and improve line efficiency. Ensure all engineering activities are carried out safely, in line with company policies, Health & Safety regulations, and Food Safety standards. Manage priorities using the sites CMMS system logging, tracking, and closing work orders accurately. Conduct root cause analysis (RCA) and implement corrective actions to prevent reoccurrence. Support continuous improvement initiatives, driving reliability, efficiency, and cost savings. Collaborate closely with Production, Quality, and Technical teams to ensure smooth daily operations. Participate in audits, compliance checks, and engineering project delivery. Lead by example, promoting a proactive, problem-solving culture within the team. Essential Ingredients Qualifications & Training Time-served Engineering Apprenticeship, HNC/HND, or Degree in Mechanical, Electrical, or Multi-skilled Engineering. Evidence of ongoing professional development and leadership training. Experience Proven experience in a maintenance or leadership role within an FMCG, food, or manufacturing environment. Strong background in managing, motivating, and developing engineering teams. Experience using CMMS systems and good general IT literacy (Microsoft Office, data reporting tools, SAP). Knowledge & Skills Strong understanding of engineering safety, risk assessments, and permit-to-work systems. Knowledge of Food Safety, Hygiene, and GMP standards. Excellent problem-solving and root cause analysis skills. Effective communicator with the ability to work cross-functionally and build strong working relationships. Well-organised, adaptable, and capable of managing multiple priorities in a high-pressure environment. A passion for continuous improvement and developing people. Extra Dough At last and by no means least you will want to know what your breads worth. A slice of the annual profits (discretionary profit share) Family time is important to us so as well as your holiday entitlement, we'll give you the opportunity to purchase up to an extra weeks annual leave Award winning pension scheme with company contributions of 7% Life assurance Products you will love along with deals and discounts for you and the family through our Extra Dough website Continued investment in your personal development Fully stocked kitchens filled with our delicious products for you to enjoy with your daily brew! Support for your health and wellbeing, including access to free physiotherapy, 24/7 access to a confidential helpline for practical advice and a comprehensive occupational health service We respect and value difference. We look to create an inclusive workplace that promotes and values diversity. Companies that are diverse in age, gender identity, race, religion, sexual orientation, physical or mental ability, ethnicity, or any other aspect which makes them unique, are proven to be better companies. More importantly, creating an environment where everyone, from any background, can do their best work, is the right thing to do. TPBN1_UKTJ

We offer our mechanics: £40,000 - £50,000 DOE plus benefits Additional opportunity to earn up to £9,000 every three years in performance bonuses(terms and conditions apply) All overtime paid at time and a half Wigan Motorstore Starting from 33 days annual leave (with room to grow) Flexible hours Toolbox cover Training provided to become an EV accredited Technician Generous employee discounts Opportunities to review salary yearly Private healthcare and sick-pay cover Maternity and paternity packages Mechanics, we couldn't do it without you... As a mechanic, you'll safely prepare our customers' cars for the road ahead. You'll care about every detail and take pride in doing a meticulous job. Above all, you'll want to be part of a capable, motivated team who feel the same way. You'll get the chance to work on an incredible range of manufacturers and models, developing your skills and staying up to date with the very latest in vehicle technology. Essential skills A certificate in Light Vehicle Maintenance Level 3 and solid work experience in the automotive industry The ability to work in a competent and efficient manner on your own or part of a busy team Strong communication skills Good attention to detail The ability to carry out work to high standards and to deadlines A proactive and enthusiastic approach The ability to accurately follow written and spoken instructions A full driving licence Day-to-day duties Carrying out servicing, repairs and maintenance to high standards Inspecting vehicle engine and mechanical/electrical components to diagnose issues accurately, using computer-based diagnostic equipment Repairing or replacing broken or defective parts Carrying out DVSA vehicle testing (if authorised) Road testing vehicles to check repairs Maintaining equipment and making sure tools are in good condition. Following checklists to ensure all procedures are completed Completing all documentation to the required standard Our Culture Arnold Clark is committed to creating a diverse and inclusive workplace. We strive to create an environment where collaboration, unique perspectives and multiple approaches are celebrated. We care about our employees and our communities, we nurture talent and encourage ambition, and we are passionate about people who take pride in their work. Our employees are at the heart of everything we do - diverse in our make-up, united in our goals. To find out more about Life at Arnold Clark , visit our website. Employment within the Arnold Clark Group is offered subject to satisfactory reference and disclosure check. TPBN1_UKTJ

Project Engineer Industry: United Utilities AMP 8 Framework, Water Sector Contract Type: Permanent Summary: We are seeking a skilled Project Engineer to oversee and manage civil, mechanical, and electrical engineering aspects within the United Utilities AMP 8 framework. This role involves coordinating multidisciplinary teams across civils, mechanical, electrical, and utilities projects, ensuring delivery aligns with client requirements, industry standards, and contractual obligations. The successful candidate will manage the full project lifecycle from design through construction, including programme development, procurement support, health and safety compliance, quality assurance, and stakeholder engagement. You will be responsible for driving project progress on site and in the office, liaising with clients, subcontractors, and design teams to ensure projects are delivered safely, on time, and within budget. Experience in civil engineering, mechanical and electrical disciplines, and utilities infrastructure is essential to succeed in this role. Skills: Proven project management experience (minimum 5 years preferred) Strong knowledge of civil engineering, mechanical, electrical, and utilities disciplines Experience within United Utilities AMP 8 or similar water sector frameworks Ability to develop and implement construction programmes Health and Safety management including SMSTS and First Aid at Work Contract and commercial awareness, including NEC contracts Strong communication and stakeholder management skills Competence in quality assurance and site inspection processes Ability to lead and coordinate multidisciplinary teams Proficient in risk management and change control processes Software/Tools: Microsoft Office 365 (Excel, Word, Project) Primavera P6 or equivalent project scheduling software AutoCAD or similar design software (desirable) BIM software familiarity (desirable) Certifications & Standards: SMSTS (Site Management Safety Training Scheme) – required CSCS card – required First Aid at Work – required Degree or HNC/HND in Civil, Mechanical, Electrical Engineering or related discipline Knowledge of CDM 2015 regulations Experience with NEC contracts and construction health and safety standards TPBN1_UKTJ

Join a market-leading confectionery manufacturer with 18 years of proven success in creating premium sweet treats in a dynamic production environment.Join an award-winning confectionery manufacturer with 18 years of sweet success, producing high-quality fudge and tablet in a fast-paced production en

Your new company Are you ready to lead electrical engineering on some of the UK's most critical water and wastewater infrastructure projects? This is your opportunity to join a global leader in design, engineering, and project management, delivering innovative solutions that support sustainable comm

In this role, the successful Electrical Maintenance Engineer or similar will be responsible for both the reactive and preventative maintenance for the electrical systems within plant/steel processing machinery. The ideal Electrical Maintenance Engineer or similar will have a background within the St

Prepare electrical and ICA design deliverables including calculations, reports, specifications, datasheets, drawings, schedules, and procurement documentation. A degree-level qualification in electrical engineering or a closely-allied subject, ideally IET- accredited. Get notified about new Electric

A leading infrastructure solutions provider in the UK is seeking an Electrical Design Engineer to join their Warrington team. This role involves creating electrical designs, collaborating with project teams, and ensuring compliance with specifications.

Are you an Electrical Maintenance Engineer looking to join a blue chip company offering specialist training, progression and overtime paid at a premium rate?. This role would suit an electrical bias maintenance engineer looking to join an expanding team within a market leading company with ambitious

An established industry player is seeking an experienced Electrical Maintenance Engineer to join their dynamic team in Ashbourne. The ideal candidate will possess a strong electrical skillset and relevant qualifications, ensuring the reliability and efficiency of production processes. With a competi

A leading recruitment agency seeks an Electrical Maintenance Engineer for a reputable company in Dudley, England. This role involves reactive and preventative maintenance for electrical systems in steel processing machinery. Ideal candidates have a background in the Steels/Heavy Industry and relevan

A leading engineering firm in Sheffield is seeking an Electrical Maintenance Engineer to support expansion due to increasing workload. The role involves fault finding, maintenance, and repair of heavy engineering equipment, requiring strong electrical skills and an understanding of safety regulation

A relevant vocational qualification and experience in the Electrical industry are required. A large further education group is seeking an Industry Skills Tutor in Building Services to manage a caseload of apprentices at the Willesden Campus.

A leading infrastructure solutions provider seeks an Electrical Design Engineer to join their team. This role, based in the UK, focuses on creating electrical designs, developing LV distribution systems, and collaborating closely with various stakeholders.

You will ideally hold a degree in Electrical Engineering or a closely related discipline and have demonstrable experience in electrical design within the water, utilities, or heavy industrial sectors. This is your chance to directly impact the local community and environment by delivering sustainabl

Professional Standing: Chartered Engineer (CEng) with a degree in Electrical Engineering or a related discipline. Senior Principal Electrical Engineer.

You will participate in a range of works including general maintenance, repairs, improvements and testing to street lighting systems / roads electrical equipment, in accordance with current requirements and regulations for electrical installations. You will assist with the operation of an Asset Mana

Tillicoultry Quarries is a successful and fast-growing family-owned quarrying company and major supplier of aggregates, asphalt, ready-mixed concrete, mortar, render and sports sand to the building xwzovoh and road construction industry.

Electronics Engineer - Aerospace.Are you the right applicant for this opportunity Find out by reading through the role overview below.Predominantly onsite (project-critical hardware activities).Up to £70 per hour (Umbrella / Inside IR35).

Plant Fitter (Mechanical / Static).Is this the role you are looking for If so read on for more details, and make sure to apply today.Overtime OTE 60K + Funded Qualification + Company Benefits.Are you a Plant Fitter looking to join an established, family-run company offering a progressive opportunity

Electrical Maintenance Engineer.

Job Title: Electrical Engineer. Maintain and optimise site performance through expert electrical engineering and safety-focused practices. Consortium Professional Recruitment xwzovoh are proud to be supporting our client in their search for an experienced Electrical Engineer t.

A long-established and highly respected engineering manufacturer is seeking an.Operating across a wide range of industrial sectors, this organisation designs and supplies advanced process heating, steam generation, thermal oxidation and water treatment solutions used globally.All the relevant skills

We are leaders in supplying innovative, sustainable building solutions to the UK construction industry; building progress for people and the planet.

Are you ready to take your career to the next level with the UKs leading sustainable building materials and construction solutions company? At Tarmac, were not just about delivering infrastructure; were committed to building a sustainable future for our communities.Have you got the right qualificati

Electrician role offers a van and fuel card, job completion bonus, monthly pay, and full-time employment.All potential applicants are encouraged to scroll through and read the complete job description before applying.You'll be working for a major contractor in the Carlisle area, known for providing

Mobile Maintenance Electrician.If your skills, experience, and qualifications match those in this job overview, do not delay your application.Omega are supporting a leading facilities management provider in the recruitment of an experienced xwzovoh Maintenance Electrician to join the team to work on

TheElectrical Engineerwill work collaboratively with the customer to support infrastructure and asset development at a major dockyard facility.

Our client, who is a respected partner of the Ministry of Defence in the UK, are searching for an experienced Electrical Fitter Apprenticeship-Trained Professionals to join their team at the Bolton site. This role's primary duties involve manufacturing and testing activities within the electrical de

The Auto Electrician role is a Monday to Friday role, with an early finish on a Friday, providing overtime at an enhanced rate, a forward thinking and fast paced company.Offering £14-15 per hour dependent on experience.Make sure to apply with all the requested information, as laid out in the job ov

NVQ Level 3 in Electrical Installation or Ele.

Time Served Electrician | Rochdale, Greater Manchester | Full Time | £32,000 – £40,000 + Overtime + 6% Pension.While professional experience and qualifications are key for this role, make sure to check you have the preferable soft skills before applying if required.A world-class, market-leading