Trabajos embedded system en LutonCrear alertas

Lead Hardware Engineer \n Based in Luton \n 12-month contract \n Paying up to £70p/h (Inside IR35) \n \n Please note - Due to the nature of the work, you'll be required to already hold or be eligible to obtain a high level of UK Security Clearance \n \n Overview: Required to solve complex technical challenges involving high-speed digital design, FPGA-based architectures, signal processing, hardware integration and system qualification within a highly regulated defence environment. \n \n Responsibilities: \n\n • Design and develop complex digital and mixed-signal hardware solutions for defence and aerospace applications.\n, • Define hardware architectures for FPGA, SoC and processor-based systems.\n, • Capture schematics and support PCB layout activities for high-speed, high-performance digital designs.\n, • Design and verify high-speed interfaces including DDR memory, PCIe, Ethernet and similar protocols.\n, • Integrate FPGA, processor, software and firmware components into complete system solutions.\n, • Perform design analysis, simulation, validation and verification activities.\n, • Support hardware bring-up, debugging and root-cause investigation at board and system level.\n, • Work closely with Systems, Firmware, Software, RF, Mechanical and Production Engineering teams.\n, • Support environmental, EMC/EMI and qualification testing in accordance with defence and aerospace standards.\n, • Produce technical documentation, design evidence and progress reporting in accordance with structured engineering lifecycles.\n, • Support customer demonstrations, integration activities, acceptance testing and trials.\n\n \n Experience required: \n\n • Proven experience designing high-speed digital electronics within aerospace, defence or other safety/mission-critical industries.\n, • Strong background in FPGA and SoC-based hardware architectures (Xilinx, AMD, Intel/Altera or equivalent).\n, • Practical board-level debugging using oscilloscopes, logic analysers, spectrum analysers and protocol analysers.\n, • Experience integrating hardware, firmware and software on complex embedded systems.\n, • Experience developing products to demanding EMC, EMI and environmental requirements.\n, • Experience designing complex multilayer PCBs incorporating: High-speed serial interfaces; High-performance processors; DDR memory subsystems & FPGA-based signal processing solutions.\n, • Knowledge of DO-254, DEF STAN, MIL-STD or equivalent aerospace and defence standards.\n, • Experience with FPGA signal processing architecture\n\n Disclaimer: \n This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

\n Principal/Lead Hardware Engineer (Contract) \n Luton based - 4 days a week onsite \n SC Clearance is essential \n Up to £70 p/h Inside IR35 \n I'm working with a leading engineering organisation delivering some of the UK's most advanced defence technology programmes and am looking to speak with experienced security cleared Principal/Lead Hardware Engineers. \n This is an opportunity to work on cutting-edge electronic systems deployed across airborne, maritime and land-based platforms, designing mission-critical hardware that supports real-world operational capability. \n What you'll be working on: \n\n • High-speed digital and mixed-signal hardware design\n, • FPGA & SoC-based architectures (Xilinx, AMD, Intel/Altera)\n, • High-speed interfaces including DDR, PCIe & Ethernet\n, • Complex multilayer PCB design and schematic capture\n, • Hardware integration, verification and system qualification\n, • Board-level debugging using industry-standard test equipment\n, • Collaboration across Systems, Firmware, Software, RF and Mechanical Engineering teams\n\n We're looking for engineers with experience in: \n High-speed digital electronics \n FPGA-based hardware design \n Embedded systems integration \n Altium, Xpedition, OrCAD or similar design tools \n Signal integrity, EMC/EMI and hardware verification \n Aerospace, Defence or other safety-critical engineering environments -Electronic Warfare, Radar, RF Systems, Communications, Sensor Systems or DO-254, DEF STAN or MIL-STD environments \n This is a fantastic opportunity to join a highly skilled engineering team delivering complex programmes from concept through to integration, qualification and customer acceptance. \n If you're interested, or know someone who could be a great fit, please get in touch or send me a direct message.

Principal / Lead Hardware Engineer Location: Luton, Bedfordshire (LU1)Duration: 12 MonthsOnsite: 90% onsiteRate: £95.44ph UMBRELLASecurity: We seek an engineer with recent high-integrity or safety-critical industry experience (defence, aerospace, or similar), or eligible for UK security clearance.The Opportunity We're looking for an experienced Principal / Lead Hardware Engineer to join a major defence programme developing advanced electronic systems for air, land and maritime platforms.This is a fantastic opportunity to work on complex FPGA and processor-based hardware, contributing throughout the full product lifecycle—from requirements capture and architecture through detailed design, integration, verification and qualification.You'll be working alongside multidisciplinary engineering teams to deliver high-performance electronic hardware for safety and mission-critical applications.Key Responsibilities Design and develop complex digital and mixed-signal electronic hardware.Develop hardware architectures for FPGA, SoC and processor-based solutions.Produce schematics and support PCB layout for high-speed digital designs.Design and validate interfaces such as DDR memory, PCIe, Ethernet and other high-speed protocols.Integrate hardware with embedded software, firmware and FPGA solutions.Carry out simulation, verification, validation and design analysis activities.Support board bring-up, hardware debugging and fault investigation.Work collaboratively with Systems, Software, Firmware, RF, Mechanical and Manufacturing Engineering teams.Support environmental, EMC/EMI and qualification testing.Produce technical documentation throughout the engineering lifecycle.Support system integration, demonstrations and customer acceptance activities where required.Essential Skills & Experience Strong background in high-speed digital hardware design within defence, aerospace or other highly regulated industries.Experience designing FPGA and SoC-based hardware (Xilinx, AMD, Intel/Altera or equivalent).Proven experience designing complex multilayer PCBs, including: High-speed serial interfacesDDR memoryHigh-performance processorsFPGA-based digital signal processingExperience using schematic capture and PCB design tools such as Altium Designer, OrCAD, Xpedition or equivalent.Hands-on board-level debugging using oscilloscopes, logic analysers and protocol analysers.Experience integrating hardware with embedded firmware and software.Strong understanding of signal integrity, power integrity and timing analysis.Experience supporting verification, validation and qualification activities.Ability to translate system requirements into robust hardware designs.Desirable Experience Electronic Warfare, Radar, RF, Communications or Sensor technologies.Development of safety-critical or mission-critical systems.FPGA signal processing.Knowledge of DO-254, DEF STAN, MIL-STD or equivalent industry standards.Hardware design reviews and technical leadership.Design for Manufacture (DfM), Design for Test (DfT) and Design for Reliability (DfR).TPBN1_UKTJ

Contract Firmware Engineer (FPGA) – Luton - 1756Location: Luton (90% onsite)Rate: £84.81/hour UmbrellaDuration: 12 monthsWe seek an engineer with recent high-integrity or safety-critical industry experience (defence, aerospace, or similar), or eligible for UK security clearance.OverviewAn opportunity for an experienced Firmware Engineer to support the development of complex FPGA-based digital systems within a multidisciplinary engineering team. The role involves designing, implementing and verifying firmware solutions for high-performance, safety-critical applications.Key ResponsibilitiesDesign, develop and verify FPGA firmware for complex digital systems.Derive firmware requirements and architectures from system-level requirements.Develop RTL using Verilog/SystemVerilog and verify designs using UVM.Work with FPGA toolchains including Xilinx and Intel (Altera) devices.Develop high-speed interface solutions (e.g. PCIe, Ethernet, JESD).Support model-based development using MATLAB/Simulink where appropriate.Collaborate closely with hardware, systems and software engineers.Contribute to design reviews, testing and documentation throughout the development lifecycle.Essential Skills & ExperienceStrong FPGA development experience across major FPGA families.Proficiency with Xilinx tools, TCL, Verilog, SystemVerilog and UVM.Experience with Xilinx 7 Series, UltraScale, Intel (Altera) or Microsemi FPGA architectures.Knowledge of high-speed interfaces such as PCIe, Ethernet and JESD.Experience deriving firmware architectures from system requirements.Familiarity with structured firmware development processes (e.g. DO-254 or equivalent).Understanding of electronics test methods and laboratory equipment.Strong communication skills and experience working within multidisciplinary teams.Desirable SkillsModel-based design using MATLAB/Simulink.Knowledge of cryptography and anti-tamper techniques.Experience applying AI/ML concepts within embedded or firmware environments.TPBN1_UKTJ

Company description:Fantastic challenges. Amazing opportunities.GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career.Job description:Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines.As a Senior Systems Engineer (Electronics) you will draw on your diverse engineering background and the product lifecycle awareness to work on a variety of research activities in the TRL1-6 range. You must have sound experience in leading technical work, including budgeting, schedule and risk management. You will be capable of achieving through others internally and externally, and you will be committed to development of your own skills and professional network. Your proactive nature will enable you to understand and adapt to new technology areas quickly.The Luton team is focussed on developing product and manufacturing process technology related to aircraft ice protection systems and specialist structures for both civil and defence applications. The areas of activity cover but is not limited to: Electro-thermal systems and Electro-mechanical systems, Specialist materials and coating systems, Embedded and structural composites, Aircraft transparencies, Icing modelling and analysis, Sensing and data acquisition, Electrical and software control systems and digital engineering / manufacturing.This role is to provide analysis and design data to support ice protection system design through modelling and simulation of in-flight icing behaviour of aircraft surfaces, or representative surfaces. It is further expected that the role holder develop an in-depth understanding of the icing wind tunnel facility capabilities, and provide consultation and support to customers and other third party users ensuring testing is conducted in line with relevant standards and specifications and contributing to test reports as required.This expertise is to be developed through understanding icing physics and aircraft ice protection philosophies (particularly electrothermal), and through practical experimentation and modelling verification using the research icing wind tunnel.The successful candidate should have a broad engineering knowledge base but have a desire to specialise and in time develop the in depth knowledge to become a subject matter expert in icing analysis and testing, being able to support next generation ice protection system designs.We are seeking someone adaptable in their approach to work, and be willing to understudy other team members in their areas of expertise to ensure project objectives are met. As a Senior Systems Engineer (Electronics), you will be naturally curious and seek to increase/deepen your own technical knowledge through study, collaborative working, hypothesis testing and experimentation.Core operational hours at our Luton site are: 07:30 - 16:30 Monday to Thursday & 07:30 - 12:30 Friday. The role requires flexibility for occassional national travel to meet with customer and we offer the opportunity to work from home up to two days per week dependent on business need.Job Responsibilities Responsible for the technical delivery of allocated project deliverables, or project work packages, ensuring the research objectives have been satisfied.You may have budget accountability for a Work Stream or Work PackageSupport or lead any necessary 'hands on' development test work and development trials that are required to meet your Work Package/Work Stream delivery objectives.Support or lead the design of external work packages to be carried out by third parties in order to meet project research objectives.Responsible for accurately capturing and recording data and results from test work and development trials.Responsible for raising and issuing high quality and detailed technical documentation.Seek to understand the strategic direction of the target products or manufacturing process technologies being developed within your project(s)Responsible for preparation of Technology Development Plans and Technology Business Cases within your project(s)Ensure all planning documentation in your responsibility is regularly updated, accurate, and delivery is on track. You may also have schedule accountability for your project(s)Suggest and explore exploitation routes, aligned with the guidance of the Work Stream Lead.Drive project(s) toward exploitation, identifying and supporting industrialisation scenario development.Support project stakeholder management with internal/external customers, and you may lead management of supply chain partners in some cases.Take an active role in creating a personal development plan linked to GKN's TEF and will be responsible for delivering on agreed objectives supported by your line managerEnsure EHS policy and process adherence for your activities, and you will contribute to a proactive EHS culture in the wider team.Contribute to the development of GKN as a 'Great Place to Work', aligned with the core principles - safe, innovative, open & honest, care & respect, and ownership.Profile description:What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes:Essential:HNC, degree or equivalent experience in electrical or systems engineeringExperience delivering designs for electro-mechanical, sensing OR controller systems within an engineering environmentElectronics pcb design experienceGood general engineering/technology knowledge base and can demonstrate strategic thinking.Working knowledge of aerodynamics and an appreciation of physics based modelling approaches for thermodynamic analysis.Experience of test/experimental design, and practical execution in laboratory or test facility conditions to defined standards, and be able to contribute to the development of new test methods.Strong self-starter, able to execute tasks according to plan.Logical and methodical approach to task planning.Experience managing deployed resources (people you lead but you are not their line manager).Good interpersonal and communication skills, and can confidently translate complex information to a variety of audiences and you are able to represent your project(s) and GKN values in internal/external review meetings.Desirable:A higher degree qualification such as a Masters, PhD or EngDGeneral awareness of budget and schedule management.An awareness of aerospace certification requirements.Experience of the Systems Development Lifecycle processYou will be developing your own network and you will have a general awareness of key companies and key individuals who operate in the wider aerospace technology and engineering fieldWe are looking for people who want to make a difference, talented members with the skills and passions to become the best of the future in what they do.Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role.The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually).We offer:What We'll Offer Once youre on board youll get the following perks and benefits:Competitive salary dependent on experienceThe opportunity to earn up to 15% bonusIndustry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basisLife Assurance 8 x salary185 hours holiday + bank holidaysIncome protectionShopping discountsCycle To Work SchemeEmployee Assistance ProgrammeVirtual GP Clinic for you and immediate familyElectric Vehicle (EV) salary sacrifice scheme (Insurance, servicing, maintenance, roadside assistance and more included)Free onsite parkingLocal gym discountFree airport parkingEnhanced family friendly leaveA collaborative, dynamic working environmentAs well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you!Join us and keep the world moving click on the link below to applyA Great Place to work needs a Great Way of WorkingEveryone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work.Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know.We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ?TPBN1_UKTJ

As Medical Director, you will be a key member of the Executive Team, working alongside the Chief Executive, Chief Nurse, Executive Directors and clinical leaders to provide strategic leadership for clinical services across the Trust. You will be responsible for leading the Trust's quality, safety and clinical governance agenda, ensuring the delivery of safe, effective and patient-centred care while driving continuous improvement in outcomes and patient experience. This is an exceptional opportunity to play a central role in shaping the future direction of a high-performing and ambitious organisation. You will provide visible, credible and values-led medical leadership, leading the development and delivery of the Trust's clinical strategy, supporting service transformation and innovation, and working collaboratively with partners across the Integrated Care System to ensure services are clinically sustainable and responsive to the needs of the population. Download the Recruitment Pack for further information. The interview process will take place w/c 14th September 2026. You will be contacted regarding next steps. Key Functions and Responsibilities The Medical Director will provide professional leadership for the medical workforce and act as the Trust's most senior clinical leader, ensuring the highest standards of clinical quality, patient safety, governance and professional practice across the organisation. As a member of the Executive Team and Board, you will contribute fully to the strategic leadership of the Trust, providing expert clinical advice and supporting the delivery of organisational objectives. A key responsibility is leading the Trust's clinical governance and quality agenda, ensuring effective systems are in place to support patient safety, clinical effectiveness, risk management, learning from incidents and continuous improvement. You will provide leadership for medical revalidation as Responsible Officer, oversee medical workforce strategy, including recruitment, retention, job planning and succession planning, and support the development of clinical leaders across the organisation. You will lead the development and delivery of the Trust's clinical strategy, driving innovation, service transformation and performance improvement to enhance patient outcomes, access and experience. With over 9,000 passionate and dedicated staff, Bedfordshire Hospitals NHS Foundation Trust provides a full array of acute and some community services to the local communities of Bedfordshire. Serving a diverse population of over 620,000 people, we are proud to be rated “Good” by the CQC, having successfully merged Bedford and Luton & Dunstable hospitals to create our Trust six years ago. We have undertaken significant investment into our infrastructure and people in recent years, including the £168 million Acute Services Block build that opened in July 2026, and have created a shared set of values for our organisation, THRIVE, to unify the organisation and give a clear mission and pledge to those we serve. We have an annual turnover of £800 million, and as an anchor organisation and a very important employer within Bedfordshire, we are committed to combatting health inequalities and deprivation to support local education training and job opportunities. We are a key partner within the Bedfordshire, Luton and Milton Keynes which forms part of Central East ICB and we work closely with a range of health and social care partners to improve and better deliver outstanding care and reduce ill health through preventive measures. The health and wellbeing of our staff remains a fundamental priority within our strategic developments, and we recognise their commitment, passion and dedication to our patients and local population. Clinical Leadership and Quality • Provide visible, credible and compassionate medical leadership across the Trust, promoting a culture of safety, openness and continuous improvement, • Provide Medical Leadership in the development and delivery of safe, effective, high quality and patient centred care across all services, • Provide Medical Leadership within the clinical governance agenda, including patient safety, clinical effectiveness, audit and risk management ensuring lessons learned are embedded and sustained, • Ensure compliance with professional and regulatory standards including GMC Good Medical Practice and maintain high standards of clinical care across all services, • Provide professional leadership for the investigation of serious incidents, complaints and clinical concerns, ensuring timely action and organisational learning, • Promote a culture of innovation, research and evidence-based practice to improve patient outcomes and experience, • Provide visible and accountable leadership delivering the national improvement agenda such as the maternity national improvement work and the Fuller review. Clinical Care and Service Delivery • Ensure that clinical services are delivered in line with best practice, national standards and patient need, • Work with Clinical Service teams to support the delivery of high-quality care, improving clinical outcomes and patient experience, • Support the development and implementation of new models of care including care closer to home and integrated pathways, • Ensure effective clinical input into service redesign, pathway development and transformation programmes, • Act as a senior clinical leader in major incidents and emergency planning arrangements Medical Workforce and Professional Leadership • Provide professional leadership for all medical staff fostering a culture of engagement, accountability and continuous development, • Act as Responsible Officer for medical revalidation, ensuring a robust appraisal and governance processes are in place, • Lead the development and implementation of medical workforce strategy including recruitment, retention, job planning and succession planning, • Oversee consultant job planning ensuring alignment with service priorities and organisational objectives, • Lead on performance management and disciplinary matters relating to medical staff in line with Maintaining High Professional Standards, • Work with the Director of Human Resources to ensure compliance with workforce standards, including Working Time Regulations Research, Education and Training • Lead the Trust’s research and development agenda, promoting innovation and ensuring research activity supports improvements in patient care, • Maintain strong relationships with academic partners, universities and training bodies, • Support the delivery of high-quality undergraduate and postgraduate medical education, • Work closely with medical education leads and colleagues within Workforce Services to ensure training standards are met and continuously improved, • Promote continuous professional development for all medical staff Strategy and Performance • Lead the development and delivery of the Trust’s clinical strategy ensuring alignment with system priorities and population health needs, • Drive service redesign to improve access, patient flow, productivity and outcomes, • Work with the Chief Operating Officer to ensure delivery of operational performance standards, • Use data, clinical intelligence and benchmarking to inform decision making and drive improvement Leadership and Team Management • Provide effective leadership to Deputy Medical Directors and the wider medical leadership team, • Support the development of Clinical Directors and Specialty Leads, • Responsibility for the Pharmacy function via the line management of the Chief Pharmacist, • Foster a culture of collaboration, inclusivity and high performance across clinical teams, • Ensure effective communication and engagement with medical staff and clinical leaders, • Chair the JLNC and contribute to wider organisational leadership forums Governance, Risk and Compliance • Ensure robust clinical governance systems and processes are in place and operating effectively, • Chair or support key governance committees including Quality Governance structures, • Ensure compliance with regulatory and statutory requirements including those of NHS England and the Care Quality Commission, • Oversee clinical audit programmes and ensure findings are translated into improvement actions External and System Leadership • Build and maintain strong relationships with partners across the Integrated Care System, • Work collaboratively with primary care, local authorities, commissioners and other providers, • Represent the Trust in regional and national forums, acting as an ambassador for the organisation, • Contribute to the delivery of system wide clinical strategies and integrated care models, • Maintain strong links with academic institutions and professional bodies Administrative and Corporate Responsibilities • Contribute fully as an Executive Director to the leadership and management of the Trust, • Provide expert clinical advice to the Chief Executive and Board, • Participate in the Executive on-call rota and major incident response, • Support the development and implementation of corporate policies and procedures, • Ensure effective use of resources and value for money in clinical services Revalidation and Statutory Responsibilities • Act as Responsible officer for medical revalidation, ensuring all statutory duties are met, • Ensure all doctors work within managed environment with appropriate oversight of performance and conduct, • Lead on compliance with all relevant legislation, regulatory requirements and professional standards, • Maintain oversight of clinical standards and professional practice across the Trust Working Arrangements The Medical Director is an Executive Director role and will be employed on Very Senior Manager (VSM) terms and conditions. The role is predominantly strategic, and leadership focused with responsibility for providing clinical leadership across the organisation and wider system. Any clinical commitment will be subject to agreement with the Chief Executive and aligned to organisational priorities. The post holder will be required to work flexibly across Trust sites and with system partners as required to fulfil the duties of the role. The role includes participation in the Executive on-call rota and acting as a senior clinical leader in the event of major incidents Appropriate professional and administrative support will be provided to enable the postholder to effectively discharge their responsibilities. • GMC registration with a Licence to Practice, • Entry on the GMC Specialist Register, • Higher professional medical qualification, • Evidence of continuing professional and leadership development, • Significant experience as a Consultant within the NHS, • Substantial experience in a senior medical leadership role (e.g. Medical Director, Deputy Medical Director, Divisional Clinical Director or equivalent), • Proven track record of leading clinical strategy, transformation and service redesign in a complex healthcare environment, • Demonstrable success of improving quality, safety outcomes and performance, • Experience of leading and embedding clinical governance and assurance frameworks, • Experience of working collaboratively with system partners across an Integrated Care System, • Experience of building organisational capability and delivering strategic change at scale, • Understanding of performance management, productivity and operational delivery within acute services, • Outstanding leadership skills with the ability to inspire, engage and influence at Board and system level, • Track record of and commitment to improving patient care, safety and experience, • Visible, credible and values led leader with strong personal integrity, • Decisive and able to translate strategy into practical action, • Resilient and able to perform effectively in a high-pressure environment It is an exciting time to join the newly formed Bedfordshire Hospitals NHS Foundation Trust. We run two busy hospital sites in Bedford and Luton. Our 7,500 staff provide high quality care for a growing population of around 700,000 across Bedfordshire and the surrounding areas. You will be joining a friendly, high performing Trust committed to ensuring the health and wellbeing of staff. As one of the largest NHS Trusts in our region you will have access to a programme of high quality training and development to help you grow your career. Travel between hospital sites may be required. We have state-of-the art facilities placing us at the heart of cutting edge health care. The Trust continues to be committed to delivering the best patient care using the best clinical knowledge and technology available. All new staff will be subject to a probationary period covering their first six months in post. You must have appropriate UK professional registration. This post is subject to the Rehabilitation of Offenders Act 1974 (Exceptions) Order 1975 (Amendment) (England and Wales) Order 2020 and it will be necessary for a submission for Disclosure to be made to the Disclosure and Barring Service. #J-18808-Ljbffr

Job Description:Your impactWe are on the lookout for talented Lead Software Engineers, if you have strong technical experience in real-time embedded systems and are eager to expand your skillset, leadership and decision-making capabilities, this role will provide the foundation for your growth.We are happy to explore engineers from any embedded software background and provide Ada specific training so you can make an impact the moment you join.As a Lead Software Engineer, you will:Deliver and integrate high-quality real-time embedded software, ensuring reliability in critical applications.Provide technical guidance and leadership, supporting teams in best practices, system integrity, and software development methodologies.Work closely with hardware, firmware, and systems engineering teams, contributing to multidisciplinary solutions.Develop your expertise in an environment that prioritises learning, mentorship, and career progression.Lead development approaches that emphasise design principles, modularity, reuse, and industry best practices, shaping technical direction while honing your leadership skills.What you’ll bringProven experience in embedded software development, with a solid foundation in real-time systems.A strong understanding of integration and requirements engineering, ensuring high-quality software solutions.Leadership experience, with a willingness to mentor and guide teams toward best practices.Knowledge of industry standards, including RTCA-DO178C or equivalent integrity frameworks.Experience with Object Orientation, Linux/VXWorks (Desirable)—but adaptability, systems thinking, and leadership potential are key.This is not an exhaustive list, and we are keen to hear from you even if you might not have experience in all the above. The most important skill is a good attitude and willingness to learn.Security ClearanceThis role is subject to pre-employment screening in line with the UK Government’s Baseline Personnel Security Standard (BPSS). An additional range of Personnel Security Controls referred to as National Security Vetting (NSV) may apply, this could include meeting the eligibility requirements for The Security Check (SC) or Developed Vetting (DV). For more information and guidance please visit: Why join usAt Leonardo, our people are at the heart of everything we do. We offer a comprehensive, company-funded benefits package that supports your wellbeing, career development, and work–life balance. Whether you're looking to grow professionally, care for your health, or plan for the future, we’re here to help you thrive.Time to Recharge: Enjoy generous leave with the opportunity to accrue up to 12 additional flexi-days each year.Secure your Future: Benefit from our award-winning pension scheme with up to 15% employer contribution.Your Wellbeing Matters: Free access to mental health support, financial advice, and employee-led networks championing inclusion and diversity (Enable, Pride, Equalise, Armed Forces, Carers, Wellbeing and Ethnicity).Rewarding Performance: All employees at management level and below are eligible for our bonus scheme.Never Stop Learning: Free access to 4,000+ online courses via Coursera and LinkedIn Learning.Refer a friend: Receive a financial reward through our referral programme.Tailored Perks: Spend up to 500 annually on flexible benefits including private healthcare, dental, family cover, tech & lifestyle discounts, gym memberships and more.Flexible working: Flexible hours with hybrid working options. For part time opportunities, please talk to us about what might be possible for this role.For a full list of our company benefits please visit our website.Leonardo UK operates a grade-based salary framework with broad bands. The salary range shown reflects the approved grade band for this role, or a narrower hiring range published within that band, and is benchmarked against the external market. Exceptions above the standard range are managed through governance controls to protect internal equity.Leonardo is a global leader in Aerospace, Defence, and Security. Headquartered in Italy, we employ over 53,000 people worldwide including 8,500 across 9 sites in the UK. Our employees are not just part of a team—they are key contributors to shaping innovation, advancing technology, and enhancing global safety.At Leonardo we are committed to building an inclusive, accessible, and welcoming workplace. We believe that a diverse workforce sparks creativity, drives innovation, and leads to better outcomes for our people and our customers. If you have any accessibility requirements to support you during the recruitment process, just let us know.Be part of something bigger - apply now!Primary Location: GB - Luton - Cap. Green 300Contract Type:PermanentHybrid Working:OnsiteJob SummaryJob number: R0001290Date posted : 2026-08-04Profession: EngineeringEmployment type: Full time

Lead Hardware Engineer Based in Luton 12-month contract Paying up to £70p/h (Inside IR35) Please note - Due to the nature of the work, you'll be required to already hold or be eligible to obtain a high level of UK Security Clearance Overview: Required to solve complex technical challenges involving high-speed digital design, FPGA-based architectures, signal processing, hardware integration and system qualification within a highly regulated defence environment. Responsibilities: Design and develop complex digital and mixed-signal hardware solutions for defence and aerospace applications. Define hardware architectures for FPGA, SoC and processor-based systems. Capture schematics and support PCB layout activities for high-speed, high-performance digital designs. Design and verify high-speed interfaces including DDR memory, PCIe, Ethernet and similar protocols. Integrate FPGA, processor, software and firmware components into complete system solutions. Perform design analysis, simulation, validation and verification activities. Support hardware bring-up, debugging and root-cause investigation at board and system level. Work closely with Systems, Firmware, Software, RF, Mechanical and Production Engineering teams. Support environmental, EMC/EMI and qualification testing in accordance with defence and aerospace standards. Produce technical documentation, design evidence and progress reporting in accordance with structured engineering lifecycles. Support customer demonstrations, integration activities, acceptance testing and trials. Experience required: Proven experience designing high-speed digital electronics within aerospace, defence or other safety/mission-critical industries. Strong background in FPGA and SoC-based hardware architectures (Xilinx, AMD, Intel/Altera or equivalent). Practical board-level debugging using oscilloscopes, logic analysers, spectrum analysers and protocol analysers. Experience integrating hardware, firmware and software on complex embedded systems. Experience developing products to demanding EMC, EMI and environmental requirements. Experience designing complex multilayer PCBs incorporating: High-speed serial interfaces; High-performance processors; DDR memory subsystems & FPGA-based signal processing solutions. Knowledge of DO-254, DEF STAN, MIL-STD or equivalent aerospace and defence standards. Experience with FPGA signal processing architecture Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change

Develops and owns embedded control platforms, including firmware, hardware integration, and GUI development, working with engineers.

The Assistant Front Desk Manager supervises a front desk team that excels in delivering industry leading service to our guests.Responsible for motivating, coaching, training, evaluating and tracking development on an individual and team level.Plays a key role in leading a team of empowered individua

Ensuring systems, processes, and controls remain robust, scalable, and compliant while enabling the business to innovate.

A leading Employee Benefits Consultancy is seeking an experienced.Client Service Delivery Operations Lead.Lead day‑to‑day operations across the Client Service Delivery function.Build strong relationships with Consulting leadership to ensure seamless client service.Oversee UK teams and internatio

At Sciterion, we’re looking for strategic scientific thinkers who go beyond the data.People who instinctively ask: what does this evidence mean in practice, how will it influence clinical behaviour, and where can it have the greatest impact?.Do you want to lead, not just deliver? How will you shap

Influence cross-functional peers to ensure technical excellence remains embedded throughout the business.

Bloom Search is partnering with a fast-growing contemporary womenswear ready-to-wear brand to appoint an experienced Senior Buyer.This is a key position within the product team, taking ownership of the buying strategy and building commercially successful collections that remain aligned with the bran

Allen Lane is working with a forward-thinking Local Authority seeking an experienced.This is an excellent opportunity to work on.Inside IR35) or PAYE: £65 per hour.Hybrid working (1-2 days per week in the office).High-quality, engaging project work.Friendly and professional team environment.You wil

Field Application Specialist (FAS).The Field Application Specialist (FAS) plays a critical role in bridging technical expertise with client-facing responsibilities.This position requires the ability to provide comprehensive pre- and post-sales technical support, promote customer satisfaction, assist

The successful candidate will play a central role in ensuring that our financial records, inventory systems, product listings and internal processes remain accurate, organised and fully up to date.

THG Fluently is a leading Language Service Provider dedicated to breaking down language barriers in critical public services.We are expanding our remote interpreting services to offer greater flexibility and accessibility to our clients across the UK.We are actively recruiting UK- and EU-based profe

This is a modern, tech-enabled practice built around collaboration, smart systems, and empowering lawyers to focus on what truly matters: doing great work. The firm’s systems and processes are designed to minimise repetitive admin and maximise your ability to focus on legal work and client communi

Yibi Group is a leading OEM manufacturer and strategic partner for global luxury and fashion brands, specializing in the development and manufacturing of high-end stainless steel fashion jewelry and accessories.As the only Chinese manufacturer fully certified by LVMH, Kering, and Richemont, we combi

Role: Project Manager (HV Substation).Multiple locations: South West England/ Wales/ Scotland - Hybrid.Turner Lovell are recruiting a Project Manager to join an £1billion + turnover EPC Contractor in the electricity and renewable energy sector.Having secured multi-year framework agreements, they ar

Accuracy, consistency, and domain knowledge of shrimp pond systems are essential. Practical familiarity with shrimp pond farm layouts: pond geometries, embankment construction, water management infrastructure, and aeration systems. Ability to distinguish between species-specific pond types (Litopena

Authority / purpose of the position.Part-time Supply Chain Specialist, primarily responsible for supply chain-related operations such as import customs clearance and logistics in the UK.Main Responsibility/ Job Expectations.Handle customs clearance for imports from the UK;.Monitor the logistics stat

Understanding of HVAC systems, plant operation and building services compliance.

Street lighting installation, feeder pillar connections and other highway electrical systems maintenance.

Property Manager (Commercial Real Estate).Leeds / Sheffield Region | Remote Working | Client Side.Home-based with UK travel across the Leeds & Sheffield region and just.Looking for more autonomy without sacrificing career progression?.We're exclusively recruiting on behalf of one of the UK's leading

A highly regarded South East Legal 500 law firm are seeking a Property Litigation Associate to join their busy team.You will join the highly successful property litigation team ranked in Chambers and Legal 500 directories.The team handle the full scope of property litigation work.You will be involve

Grounds Maintenance | Arboriculture | Winter Services.South East based, national remit.EOLet's be clear about one thing up front: this is not a surveying or building estates rol.Estates" here means the green and external side grounds maintenance, arboriculture and winter services.Crews, plant, fleet

Surrey | Hybrid Working (Minimum 3 Days On-Site).Are you an Industrial Relations professional who can operate at both a strategic and operational level?.Do you have the credibility to influence senior leaders, build trusted relationships with employee representatives, and help shape the future of em

Monday to Friday | One day Working From Home.A growing food manufacturing business is looking to appoint an NPD Project Manager to join its Operations team, reporting directly to the Chief Operating Officer.This is a newly created role designed to bring greater structure, visibility and governance t

MAP Legal are working one of the UK's leading employment teams advising senior executives, entrepreneurs, family offices and international businesses.Our client is seeking a talented Employment Associate (1-2 PQE) to join its highly regarded London employment practice.This is an exceptional opportun

Lead the commissioning and performance-proving of treatment plant, ensuring systems achieve consent limits and contractual performance requirements. Ensure treatment operations comply with WJ’s SHEQ requirements, environmental permits, and safe systems of work. Proven experience in the design, bui

GenAI Full Stack Engineer - Con, Senior Con & Managing Consultant.Hybrid / Flexible working across the UK.Candidates must be eligible for SC Clearance, have 5 years UK residency, and the correct right to work status in the UK.We are hiring for multiple GenAI Full Stack Engineers with a leading IT Co

Please only apply to the role if you meet the specific criteria detailed below*.Hertfordshire (3 days per week).We're excited to be on the search for an experienced.This is a fantastic opportunity for someone with experience managing products from concept through to shelf, ensuring projects are deli

Assistant Quantity Surveyor or Quantity Surveyor – Civil Engineering packages.PERMANENT Salary £35,000 - £55,000 + Package.HYBRID WORKING - Sites, office and home.Training - Development - Project ownership & authority.Assistant Quantity Surveyor or Quantity Surveyor.Quantity Surveyor should be w

BioTalent are delighted to be partnering with an innovative, commercial stage diagnostics client currently building out their first team of field medical experts in Europe.Reporting directly to the Vice President, Medical Affairs, you will be responsible for:.Building and maintain relationships with

Kent | Manufacturing | Excellent Salary + Benefits.We're recruiting on behalf of a leading UK manufacturer for an experienced Site Manager / Site Director to lead a well-established manufacturing operation in Kent.This is a pivotal leadership role where success will be driven as much by your ability

Safety Physician – Director Level.Global Development | Rare Disease & Neurology | UK.You are a medically trained safety leader who wants to move beyond execution and play a defining role in how development programmes are designed, challenged and advanced.You want to operate at the heart of clinica

This role is both scientific and hands-on- getting the technology embedded in NHS and private hospitals, providing clinical support and medical information, engaging clinicians and KOLs, and upholding compliance (MHRA, ABPI/ABHI). Be the clinical lead on getting IVDs embedded at each site- owning th

Hybrid between home and our Kettering office (2 days per week).Partner Service Operations Lead.Please note, this role is being offered as an 8 month fixed-term contract, working 28 hours per week**.Partners as they embark on their CMI journey.You will have the unique opportunity to shape the initial

Cooperation Facility to Support the Implementation and Programming of EU Action and Team Europe Initiatives in Lesotho.NTU International is establishing a pool of qualified Non-Key Experts (Senior and Junior).Mobilisation will be subject to specific Terms of Reference and approval by the EU Delegati

Swift Strategies is a digital, data and technology consultancy specialising in transformation.We partner with government departments, public bodies and education organisations to deliver strategic, user-centred solutions that improve outcomes for the people who use them.You'll manage the delivery of

Hampshire & West Sussex | Hybrid working (2 days in office).We are working with a long-established, highly regarded law firm with a strong reputation across Hampshire and West Sussex, who are looking to recruit an experienced Wills, Trusts & Probate Solicitor to join their growing Private Client tea

Ensure compliance with internal quality systems, industry standards, APQP requirements, and change control processes. Demonstrable experience in quality engineering, design assurance, new product development and well-established NPD systems. Experience using quality and product data systems such as

GxP/CSV), ensuring system reliability, and uninterrupted delivery of ongoing innovation initiatives. Manage complex technical landscapes spanning infrastructure, databases, and system integrations, ensuring timely issue resolution. Define and support technical solution designs to enable seamless sys

William James Recruitment is instructed by a leading UK commercial law firm seeking an Associate or Senior Associate to join its highly regarded and fast-growing Cross-Border Disputes practice, based primarily in London.The firm is a nationally recognised, Top 50 practice with a strong international

We are seeking a proactive Procurement Manager who will be responsible for all procurement activity across the organisation.The successful Procurement Manager will provide trusted assurance to senior leaders,.Procurement Manager - Duties and Responsibilities:.Lead and oversee all end‑to‑end proc