Trabajos mechanical design engineer en BradfordCrear alertas

At Modine, we are Engineering a Cleaner, Healthier World™. Building on more than 100 years of excellence in thermal management, we provide trusted systems and solutions that improve air quality and conserve natural resources. Our Airedale by Modine brand is a world leader in the design and manufacture of innovative thermal management solutions for data centers, clean rooms, hospitals, universities, and other mission-critical environments. Trusted as The Critical Cooling Specialists, Airedale by Modine has decades of experience providing efficient, flexible end-to-end cooling solutions that work smarter, not harder, to deliver more cooling for less power. With manufacturing facilities in Canada, Spain, the UK, and the U.S., we’re scaling up across the world to support an ever-growing demand for our solutions. That’s where you come in…. The Opportunity Due to continued expansion and company growth an excellent opportunity has arisen for a Senior Electrical Design Engineer to work as part of the Research & Development Department based in Leeds reporting to the Principal Electrical Engineer. It involves working closely with a team of mechanical, controls, manufacturing and quality engineers to design and develop new standard HVAC products whilst maintaining the existing product portfolio. The role consists of working with the Product Development teams to develop new electrical product designs in accordance with APQP (Advanced Product Quality Planning) and relevant SOM guidelines from concept through to full product launch. You will aid the Principal Electrical Engineer & Lead Mechanical Engineers where necessary and as a team will be responsible for creating design briefs for companywide approval, hitting cost targets, designing electrical infrastructure of products with customer, manufacturing and assembly in mind to allow labour targets, project timescales, technical features, training and all critical deliverables to be met. You will be required to work closely with the Product Development Controls team to bring the electrical and controls design to fruition and support changes to the current portfolio. Role Requirements: • Responsible for improving the electrical aspects of product innovation and customer focus of Airedale by Modine standard products., • Assist in formulating unit electrical design and controls operation briefs for approval., • Ensure electrical aspects of new components are properly tested prior to introduction., • Oversee electrical build, wiring best practice, test and approval of prototypes., • To ensure appropriate standards and approvals and testing is carried out (i.e. EMC testing)., • To conduct product introduction support and training., • To ensure the appropriate design modifications are released informing all concerned of engineering changes., • Carry out electrical design on a range of HVAC systems, for both new and existing ranges, ensuring safe operation and compliance with relevant legislation., • Selection/sizing of appropriate electrical components, motors, cabling etc. using engineering design calculations and best practice., • Communicate internally at all levels to provide technical advice or suggestions for improvement to design., • Communicate with internal customers to provide product technical advice/support, • Attend site meetings and trade shows where required., • Build standard electrical CAD drawing generators, symbol libraries and circuits using AutoCAD software., • Produce accurate parts lists., • Design control panel layouts., • Design terminal lists and layouts., • Assist & liaise with mechanical and controls engineers. Required Qualifications & Experience • Hold a technical degree and have 5+ years experience with electrical design, preferably within the HVAC or Machine design sector, although all experience will be considered., • Must be able to innovate and be able to support ideas through to implementation., • Knowledge of UKCA and CE marking process., • Knowledge/understanding of PLC controllers., • Experience with both 3 phase power circuits & low voltage control circuits., • Experience with HVAC application and knowledge of cooling and heating systems (Not essential)., • Ability to source appropriate components., • Knowledge and awareness of current legislation affecting electrical design and testing., • Ability to work pro-actively, using own initiative., • Be able to produce high quality accurate information with good attention to detail., • Ability to work to deadlines., • Strong team working skills., • Have good written & communication skills. Experience of the following software would be advantageous • Electrical CAD Software (i.e. Promis-e / AutoCAD Electrical), • AutoCAD (2D Modelling), • Solid Edge (3D Modelling), • Microsoft Word, Excel, Outlook In Return we Offer • Competitive Salary, • Employer Contributory pension of 7% and Employee 1%, • 25 days holiday plus bank holidays and the opportunity to purchase a further 3 days through salary sacrifice scheme., • Airedale rewards discounts on shopping vouchers and days out.

White Label is working with a well-established MEP design consultancy based in Bradford that’s looking to bring in a Design Engineer with a background in mechanical building services.This is a key role in a close-knit team that values quality, consistency, and clear communication.You’ll

Degree or equivalent qualification in Mechanical Engineering or a related discipline. Produce detailed engineering drawings, specifications, and bills of materials. Manage engineering changes, ensuring accurate documentation and configuration control.

Reporting directly to the Engineering Manager, youll work in a large and multi-skilled Engineering team on the design and development of complex special purpose machines. A globally recognised Bespoke Machinery & Precision Equipment manufacturer in West Yorkshire are looking for an experienced Mecha

Senior Mechanical Design Engineer - Building Services. Senior Mechanical Design Engineer. This role would suit an experienced mechanical design engineer who enjoys working on technically demanding projects, has strong knowledge of large-scale systems, and is comfortable leading projects from concept

Overview Are you excited to be part of fast paced and complex projects at the cutting edge of the nuclear industry? If so, then let's shape the future of nuclear together. AtkinsRéalis is one of the world's leading multi-disciplinary consultancy firms offering unparalleled opportunities for individuals in search of a rewarding career. We offer more than just a job. We offer an opportunity to make a difference and to shape the world to benefit future generations and the environment. At AtkinsRéalis, we're proud to say that the great work we do is thanks to our people's diversity of thought, expertise, and knowledge. When you join us, you'll be a part of this genuinely collaborative environment, where everyone's voice is valued and treated equally. Our Nuclear and Power business is no different. Simply put, it's'a great place to be, and following continued success across the UK's nuclear renaissance, our Mechanical and Electrical Capability is looking to appoint several Senior Mechanical Engineers. With opportunities spread across design, project, and site-based engineering, we're eager to find the right role for you. Whatever your preference, we'll support your aspirations. Your role • Motivated to apply their technical expertise to influence outcomes by becoming involved in exciting opportunities across the nuclear industry.

Mechanical Design Engineer Requirements: HNC or Degree in Mechanical Engineering Experience in Machinery Design &/OR Precision Equipment Design to BS8888 standards (Essential) Strong 2D & 3D CAD Skills Benefits of this Mechanical Design Engineer role: Flexible Working Hours Annual Bonus Scheme 25 H

At Quadient, we support businesses of all sizes in their digital transformation and growth journey, unlocking operational efficiency with reliable, secure, and sustainable automation processes. Our success in delivering innovation and business growth is inspired by the connections our diverse teams create every day, with our clients and each other. It’s these connections that make Quadient such an exceptional place to grow your career, develop your skills and make a real impact – help our future-focused business lead the way in powering secure and sustainable business connections through digital and physical channels. Job Description Shape the Future of Our Products We’re looking for an Design Support Engineer / LCM Design Draughtsperson who thrives on precision, collaboration, and innovation. In this role, you’ll be at the heart of our design process—turning ideas into reality by creating and maintaining the CAD models and documentation that power our products. Why Join Us? • Work on cutting-edge electro-mechanical designs that make a real impact., • Collaborate with talented teams across design, production, and technical disciplines., • Own the creation and maintenance of CAD models, drawings, and Bills of Materials., • Drive accuracy and efficiency through data management and change control processes., • Partner with design teams to troubleshoot, innovate, and improve workflows., • Expertise in Creo Parametric (or similar 3D CAD system) and AutoCAD., • Experience with PLM/PDM systems (PTC Windchill preferred)., • Strong mechanical drafting skills and knowledge of industry standards., • Familiarity with sheet metal and turned parts design., • IT literacy and an interest in CAD system administration., • Flexible Work: Embrace a hybrid work model blending office and remote setup for a balanced lifestyle., • Endless Learning: Access global opportunities for growth through our 24/7 online learning platform., • Inclusive Community: Join our Empowered Communities and engage in our Philanthropy program., • Comprehensive Rewards: Enjoy competitive Total Rewards covering wellness, work/life balance, and more, including a generous referral scheme.

Company Description The Anthro joint venture between Egis and VVB Engineering will provide comprehensive turn-key services for London’s state-of-the-art HS2 gateway station at Old Oak Common. We have been awarded a multi-year contract to deliver MEPHFC (Mechanical, Electrical Public Health, Fire and Communications) systems under a design and build NEC 3 Option C contract. Job Description To coordinate the process of managing and creating digital information. A BIM coordinator ensures that information and data flows in a specific order according to standard BIM methodology. They establish and maintain BIM workflows / BIM execution plans (BEPs), manage the federated model process, resolve any coordination issues that may arise, and manage/mentor a small team. Core Responsibilities • Utilise Bentley ProjectWise with OpenBuilding Designer, and MicroStation for detailed 3D CAD model creation and documentation, ensuring models are fully coordinated and by using clash avoidance tools which are embedded within the digital twin used on the project., • Produce model geometry and information in line with the Component Catalogue and outline information within the BIM Execution Plan (BEP)., • Ensure all models that are submitted, meet the project requirements set out, and ensure systems are in place for clash avoidance, internal model audits and clash detection before model submission., • Assist in the maintenance of the project's ProjectWise Common Data Environment, ensuring accurate and timely information flow and adherence to data management standards., • Participate in quality assurance checks of to ensure they meet the project's accuracy, detail, and the employers information requirements., • Assist in monitoring compliance with the BEP and the supporting project standards, contributing to regular reports on BIM deliverable status., • Work closely with other disciplines to ensure the 3D CAD models are integrated and coordinated efficiently, attending regular coordination meetings as necessary., • Management of a small team within the project and/or subcontractors, including BIM Modellers, CAD Technicians/Apprentices for production design outputs, • Take a lead role in managing the project BIM design sub-team and managing all technical aspects related to interdisciplinary model coordination, • Plan and co-ordinate the activities of the BIM/Digital sub-team to meet the project delivery requirements, • Support the management team in Client meetings for technical issues, • Proactively review design documentation to ensure compliance to standard and requirements, • Coordinate the Quality aspects of the sub-systems deliverables as per the project Quality Management Plan / Exchange Information Requirements, • Produce and/or review (wherever applicable) digital/BIM deliverables, act as a technical control level across projects at sub-team level, • Support and develop competency of the sub-team, following direction from line management / Egis Head of Profession / Functional Head, including:, • Training plan,, • Guidance and mentoring to junior team members,, • Support the international Engineering Design Centre (EDC) strategy and team management structure in the UK, • Support the BIM/Digital Strategy and help maintain our ISO 19650 accreditation in the UK, • Support in development and improvement of our BIM processes/protocols for input data management and external deliverables / published documentation, • 6-8 years of experience in Engineering / Technical functions, with at least 2 years’ experience as a BIM Coordinator in major infrastructure/transportation projects., • Excellent communication skills in digital management., • Persistence, attention to detail, and sound judgement., • Effective time management and flexibility., • Ambition to lead and mentor a sub-team of BIM and IM specialists., • Capability to manage project timescales and advise on resource requirements., • Experience with data management and integration tools., • Excellent understanding of all relevant BIM standards, design integration procedures and relevant legislation, • Experience of using:, • Bentley ProjectWise, • Bentley MicroStation, • Bentley OpenRail Designer, • Bentley OpenBuilding Designer, • Bentley Raceway, • BSc or similar in Bachelor Degree (BEng, BSc) in a Numerate, Scientific or Engineering subject or Higher Education/equivalent training and experience., • Chartered Engineer/Technician membership or working towards an equivalent professional status from a recognised institution, • Knowledge and understanding of rail engineering, including Network Rail and associated rail standards, and related regulations (CDM, CSM, RIR), • Knowledge of UK design standards, such as Network Rail, HS2 and TfL, • Knowledge of railway infrastructure, systems, and operating requirements, • Knowledge of quality assurance, • Experience of working with various stakeholders, including clients, contractors, and internal teams., • Knowledge in producing BEPs, Task Information Delivery Plans (TIDP), Master Information Delivery Plans (MIDP) and Model Production Delivery Tables (MPDT), • Experience of using:, • Synchro, • REVIT, • Civil 3D, • Navisworks

Engineering Project Manager Electrical & Instrumentation Systems in Hazardous Environments Location: Hybrid West Sussex+ UK travel & occasional international travel Salary: £50-£70,000 DOE + car allowance + bonus Type: Permanent, full-time The Company A specialist engineering business delivering electrical, instrumentation and fluid-handling systems into safety-critical environments across the UK and internationally. They design, engineer, integrate and support complex assets from concept and build through to testing, commissioning and handover, working with both industrial and commercial clients. Their reputation is built on technical integrity, quality delivery and practical engineering excellence. The Opportunity This is a senior Engineering Project Manager role you’ll take ownership of the technical delivery of a large and varied project portfolio, managing multiple live projects at any one time at different stages of the process, some running over multiple years. This role is best suited to someone who enjoys setting priorities, managing competing deadlines, and owning the engineering detail, rather than pure people management. You’ll personally pull together scopes, lead designs, manage approvals, and see projects through to build, commissioning, and handover. What You’ll Be Doing • Owning the full engineering lifecycle: survey, scope, concept design, detailed design, delivery and handover, • Managing multiple concurrent engineering projects across electrical, mechanical and process disciplines, • Acting as the technical authority between commercial, design, production, quality and commissioning teams, • Supporting the commercial team with technical input, proposals, and costings, • Coordinating internal electrical design engineers and external specialist consultants, • Managing design certification, approvals, and client sign-off, • Overseeing the transition from design into production and build, • Working closely with commissioning teams to ensure systems are delivered and handed over correctly, • Maintaining regular client communication and technical confidence throughout the project lifecycle This is a hands-on management role, you will personally drive a significant proportion of the engineering workload rather than delegating everything. Technical Environment • Electrically biased systems with mechanical and hydraulic integration, • Fuel storage, transfer, and fluid-handling systems, • Large fabricated assets including tanks, skids and packaged systems, • Highly regulated and safety-critical environments (aviation, industrial, hazardous areas), • Use of external design consultants and certifying bodies What We’re Looking For You’ll be an experienced engineering professional who is comfortable managing complexity, ambiguity, and scale. Essential: • Strong electrical engineering background (E&I / controls / systems), • Proven experience delivering engineering projects end to end, • Comfortable managing multiple projects simultaneously, • Confident interfacing with clients, consultants, and internal teams, • Strong organisation, prioritisation, and communication skills, • Willingness to travel occasionally within the UK and internationally Highly desirable: • Experience in fuel systems, process engineering, oil & gas, aviation, or similar regulated sectors, • Exposure to ATEX, CompEx, or hazardous-area environments, • Experience working with HAZOP documentation and design approvals, • Understanding of mechanical and hydraulic integration, • HNC, HND or Degree in Electrical Engineering or similar Why This Role Stands Out • Genuine technical ownership, not just project tracking, • Influence across design, delivery, and client relationships, • Exposure to complex, long-life engineering projects, • Opportunity to shape engineering delivery as the business grows, • Trusted, senior role within a specialist engineering environment Interested? If you’re an experienced Engineering Project Manager ready to step into a role with real responsibility and technical credibility, we’d like to hear from you. Please email your CV to or call 0115 870 0115 for more details

We are the leading provider of infrastructure services. At Altrad, we transform our nation’s critical infrastructure to operate safely and sustainably. With over 11,000 talented people, we provide the full spectrum of critical engineering and construction services for industries both onshore and offshore. Join a Leading Organisation in the Nuclear Industry Role details: The Planning Engineer is accountable for developing, monitoring, management and delivery of the relevant contract engineering & construction planning programmes for all work scopes, so that the contract can be controlled and executed within Cost, Quality & Schedule. Key Responsibilities: • To develop and maintain accurate and effective engineering & construction programmes, plans, schedules., • To develop resource schedules for the engineering & construction functions ensuring accurate data is published and readily available, • To utilise, where available and appropriate, industry planning norms / standards that align with the contractual requirements., • To proactively engage with stakeholders and interfaces to maximise the overall success of engineering & construction delivery., • To ensure all engineering & construction work is planned in compliance with all company and client processes and procedures., • To support the successful execution of assigned engineering & construction works; safely, and in line with specification, budget and program., • To communicate and cooperate with and support all affected parties in order to support efficient and effective engineering & construction planning., • To engage with stakeholders to maintain accuracy of engineering & construction programmes., • To report on a regular basis engineering & construction planning status, changes, risks, options., • To engage with procurement and supply chain to accommodate long lead items within engineering & construction plans., • To support management and delivery teams (management, design and construction) as required., • To engage with construction teams to capture realistic and practical methods of working and incorporate in engineering & construction planning outputs – Constructability, • To incorporate emergent works effectively into existing engineering & construction programmes., • To capture all instances of change to engineering & construction scope, programme, budget, and resources, with sufficient data granularity to support periodic reporting and analysis to drive improvements., • To anticipate problem areas regarding engineering & construction planning critical paths and advise remedial action., • To produce all necessary engineering & construction programmes and reports at the appropriate times to reflect the overall contract requirements., • To report requirements to be agreed with Contract Management and client., • To optimise the use of approved computer software packages to aid reporting responsibilities, visibility, communication, and ensure all key accountabilities are met., • Level 4 Project Control / Management Qualification, • 5 years recent experienced in an equivalent role, • ONC / HNC or equivalent in an appropriate Planning and / or Engineering discipline (mechanical, EC&I, construction, etc), • Good grasp of CDM regulations, • Relevant Computerised Planning Package Training (ie Primavera P3, P6 Microsoft), • Work on high-impact projects within a leading organisation at the forefront of the industry., • Competitive salary and benefits package., • Opportunities for career growth and professional development., • Collaborative and dynamic work environment with a focus on innovation and excellence.

Key Responsibilities and Outcomes The Project Engineering Manager will be technically responsible for the Engineering work on a variety of Project and Product development activities by allocating resources, supervising and directing preparation of Project deliverables. • Manage and lead a team of multi-discipline engineering (internal and external) resources to coordinate production of Engineering deliverables in accordance with the Project Plan., • Review and provide Quality Assurance of the Engineering phase deliverables through to the fabrication and installation phases, • Formulate resolutions to technically challenging and/or high-profile issues with support from discipline Engineering and effective communication with clients, subcontractors and senior management., • Monitor the Engineering, progress and address shortfalls, developing recovery plans where required and ensuring plans are implemented. Provides feedback to Project Managers and Engineering discipline supervisors as and when required of progress., • Chair Project Review Meetings (PRM) and ensure that associated reports are compiled and distributed accordingly., • Generate and review the Invitations To Bid (ITB) documents submitted in the Proposals stage., • Prepare/reviews resource planning estimates and provides input to the project delivery, • Identity a clear scope of work and supervises preparations of the Technical Document Register (TDR), • Responsible for planning/scheduling all Engineering activities and resource planning. Quantifies the total number of Engineering deliverables, resource allocation and format of delivery and other requirements for execution of the work. Provides necessary regular Project controls/reporting input., • Oversight of approval and release of all Engineering deliverables ensuring appropriate levels of checking, approval and quality across all disciplines., • Provide support to Procurement including long lead items: approve technical requisitions, Vendor Documentation Reviews and Technical Bid Evaluations to ensure design conformance., • Ensure compatibility and conformance with client specifications and recommends cost effective improvements to equipment selection/specifications within the scope of client specifications and requirements., • Utilise experience to input to Engineering and wider Carbon Clean team to improve current/future performance – be part of our continuous improvement expertise., • Building trusted and credible working relationships both within and outside the company. Requirements To be successful in this role you should have a combination of the below knowledge, skills, and experience: • Engineering Degree level qualification, ideally in Mechanical or Chemical Engineering., • Chartered Engineer (Preferred), • Excellent understanding of the multidisciplinary Engineering involved in process plant (e.g gas processing) design, fabrication, and operations., • Experienced in the integration of occupational and process safety management into design, fabrication, and operations., • Experience in an Engineering supervisory/management role, managing both teams of Engineers and external contractors., • Comfortable leading and managing an experienced team of discipline Engineers., • Experienced working with budgets, including demonstrable involvement in budget control., • Ability to train team members in new skills and competencies., • Strong problem-solving skills, decision making, whilst being proactive in achieving positive results., • Experience of working in plant operations or interfacing with operations personnel through design in the process industry., • Good leadership experience is essential. We give you: • The opportunity to continue to develop both personally and professionally, in our rapidly growing company, • A brilliant company culture that encourages initiative, collaboration, and positivity at work, • Great office environment in our new London HQ, close to the South Bank, and Waterloo, Blackfriars and London Bridge stations, • Hybrid working – with the flexibility to work from home for up to 3 days a week Benefits & perks include: • 25 days holiday plus Bank Holidays, • Private Healthcare (family cover available for all colleagues), • Health Cash Plan, • Income Protection and Critical Illness Cover, • Employee Assistance and Wellbeing programme, • Generous pension contribution – minimum of 5% contributed by the company, • Cycle to Work Scheme, • Electric Car Scheme, • Employee Perks scheme, • Support towards professional qualification and memberships Equal Opportunities We are passionate and committed to our people. At Carbon Clean, you will be working in an inclusive environment. It’s talent that matters to us and we encourage applications from people irrespective of their gender, race, sexual orientation and identity, religion, age, disability status or caring responsibilities.

United Infrastructure is a dynamic and rapidly expanding business, focused on delivering critical infrastructure projects, across the utility and social infrastructure sectors. Our team of highly skilled and hardworking specialists deliver innovative solutions to the complex challenges our clients face. Our company is split into two business areas: Utility Infrastructure – Our team of Utility Infrastructure specialists design, build and maintain critical water, energy (gas), power and telecoms infrastructure, for the UK’s largest network owners and operators. Social Infrastructure - Our team of Social Infrastructure specialists revitalise homes and communities by carrying out a wide range of work, from retrofit to refurbishment, and maintenance. Inside our Energy business, we’re scaling delivery of complex, multi‑phase energy programmes—hydrogen, CCUS, biomethane, gas pipelines and power assets—and we’re looking for an Engineering Director to lead our Engineering Function, act as Design Authority, and set the bar for safe, sustainable, right‑first‑time delivery. The UK’s transition demands resilient infrastructure and dependable engineering leadership. You’ll shape our Energy Design Hub and the standards, assurance gates, and culture that underpin it—bringing constructability insight early and maintaining technical excellence through detailed design, construction, commissioning and handover. Job Description • Build the function: Establish and mature the Engineering Design Hub—structure, processes, KPIs, tools, and ways of working to support Tier‑1 scale and differentiation., • Design Authority & governance: Own engineering standards and design assurance gates. Drive constructability, operability, and whole‑life performance across multidisciplinary designs., • Portfolio assurance: Guide teams through complex interfaces (e.g., trenchless crossings, AGIs/BVSs, third‑party approvals), chair design reviews/readiness checks, and de‑risk delivery on major programmes., • People & capability: Grow and mentor a high‑performing team of discipline leads and principal engineers; set competency frameworks and progression pathways; champion chartership and continuous learning., • Digital & innovation: Accelerate adoption of digital engineering (BIM/CDE, analytics, data standards) to improve quality, traceability and productivity., • Design maturity: Higher first‑pass approvals and fewer late design changes through robust assurance gates., • Safety & quality outcomes: Strong leading indicators, timely closure of findings, and demonstrable alignment with ISO 9001/14001/45001., • Delivery confidence: Smoother path from FEED to IFC and into construction; predictable programme control; reduced rework and variation exposure., • Capability growth: A motivated team with clear competencies, mentoring and chartership pathways—ready to scale with our pipeline., • Chartered Engineer (CEng) (Mechanical, Civil/Structural, EC&I or related) with experience in energy/utilities infrastructure., • Proven leadership of FEED and EPC design on large, multidisciplinary programmes—able to act as Design Authority and set standards across disciplines., • Command of UK/EU regulations and utility frameworks (e.g., CDM, NERS) and practical know‑how embedding management systems (ISO 9001/14001/45001)., • Familiarity with relevant codes/standards for pipelines and associated assets (e.g., ASME B31.8, BS 4515‑1, API 1104, ISO 21809) and the construction methods that bring designs to life (including trenchless works). This role will be based out of Warrington with exposure to our site based operations

Senior Mechanical Design Engineer. Are you a Mechanical Design Engineer with a passion for developing complex special-purpose machinery? Platform Recruitment has partnered with a leading engineering company that specialises in the design and development of machinery, delivering cutting-edge solution

To extend the current team already operating in UK, ESA Engineering is looking for an Engineer to cover the mechanical and technical designs for high luxury retail projects, but not limited to that. ESA Engineering UL Ltd is a leading engineering consultancy specializing in design and energy solutio

Structural Design Engineer Southampton / Hybrid, UK £45 - 60,000 + benefits If you enjoy working in a flexible and dynamic start-up environment and love variety within your role then this senior structural design / mechanical design engineer opportunity would be a great fit. The company specialises in wind propulsion systems for the marine sector and due to considerable growth plans, they are looking for a senior structural design engineer / mechanical design engineer to join their team and help drive products from concept through to full scale production. Your Role: Structural Design Engineer: • Lead mechanical and structural design of subsystems from concept through manufacturing release, • Produce 3D models, detailed drawings and structural/ thermal FEA calculations to ensure robust designs, design for manufacture (DFM) & continuous improvement are achieved, • Manage design validation, documentation and integration with performance, systems and manufacturing teams, • Champion professional standards of engineering integrity, safety and sustainability within the team (DNV, LR etc), • As the team and business grows, you will be able to mentor and support junior engineers and take responsibility for whole propulsion system projects Skills / Knowledge: Structural Design Engineer: • A good degree in a relevant subject (e.g. mechanical / structural / marine engineering), • Strong industry experience in either heavy structural design, heavy machinery, wind turbines, cranes, marine, shipping design, capital equipment, hydraulic lifting platforms coupled with good systems knowledge – actuators, gearbox, cooling, control systems etc. This is not just a stand alone structures role., • Proven industry experience taking a product from concept into full production with good knowledge of DFM, DFA, large welded structures, materials, corrosion, composites and steels etc, • Proven experience of high end 3D solid modelling CAD software (e.g. Inventor, Unigraphics NX, Solidworks, Creo, Catia or similar), • Practical, hands on engineering skills would be ideal - ability to build or fabricate systems, • Positive, enthusiastic attitude with a passion for engineering and mechanical product / structural design This role sits within a growing start up business so flexibility and an adaptable approach to engineering is required. The role offers hybrid working with 2/3 days in the office based around Southampton.

An exciting opportunity has arisen to join a market-leading group operating across the Commercial, Industrial, Residential and Service sectors, who are now looking for a Mechanical Design Engineer to support the delivery of innovative engineering solutions across their expanding product portfolio. This Gloucestershire based dynamic organisation has become the market leader in each of the sectors it serves and is embarking on an ambitious growth plan over the next 3 years. With growth comes investment, in products, infrastructure, and in people. The group prides itself on being entrepreneurial, customer focused and operationally best-in-class, creating an exciting environment for engineers who want to innovate, develop and make an impact. As a Mechanical Design Engineer, you will play a key role in developing new products and enhancing existing designs, ensuring that solutions are technically robust, manufacturable and fully compliant. Working across the full product development lifecycle; from initial research and concept generation through to prototyping, testing and production release. Key responsibilities for the role of Mechanical Design Engineer, based in Gloucestershire: • Researching and developing new product concept as well as improving existing designs based on customer, production and market feedback., • Creating and maintaining 3D CAD models, 2D drawings, BOMs and engineering documentation using Solidworks within a PDM managed environment., • Applying DFM/DFA principles and ensuring compliance with relevant industry safety standards and regulations., • Performing Finite Element Analysis (FEA) using Solidworks Simulation., • Support of prototyping, testing and validation activities, analysing results to drive design iterations., • Collaborating with Product Management, Production, Quality and Supply Chain teams., • Participating in design reviews, risk assessments (including FMEA), and broader project lifecycle activities from concept all the way through to production release., • Maintaining accurate engineering data and version control within Solidworks PDM. Key skills required for the role of the Gloucestershire based Mechanical Design Engineer: • HND or Degree in Mechanical Engineering, Product Design Engineering or a related discipline., • Demonstrable experience in product design or development, ideally involving fluid-handling / water management / pump systems / pressurisation units technology., • Experience of working within R&D or New Product Development (NPD) environments., • Industry experience of pumping systems, pipework design, fabrication design or water management / fluid technology., • Proficiency in Solidworks 3D CAD and PDM systems (Solidworks PDM preferred)., • Experience with FEA tools and analysis methods., • Knowledge of DFMA, GD&T and prototyping/testing processes., • An understanding of compliance requirements, industry safety standards and sustainable product design. Working environment and opportunities: • Hybrid working with time split between home, office and site as required., • Join a highly skilled, ambitious and supportive engineering team within an industry-leading group., • Contribute to the development of innovative, high-performing products used across multiple sectors. This role offers a unique chance to become part of a forward-thinking engineering group with big ambitions, a collaborative culture, and a commitment to investing in its people. Benefits include Bonus + Private Medical + Pension. To apply please send your CV to , or for more information contact Chuck Lam on 01582 878868.

A leading manufacturer of a range of complex electronic applications for the military and aerospace industries are searching for a Production Manager to join their dynamic team based in Kent. Our client is looking for a proactive Manufacturing Engineer to join a growing and forward-thinking manufacturing team. This role is ideal for an engineer who enjoys solving complex problems, improving production processes, and driving innovation through automation. Responsibilities as an Manufacturing Engineer in Kent. • Support NPI Projects with robust process design and technical input., • Assist in risk analysis activities such as DFMEA and PFMEA., • Identify and implement process and equipment solutions, including supporting automation integration (robotics, PLC/HMI, vision systems, conveyors, assembly/test automation)., • Design and validate tooling, fixtures and workstations., • conduct prototype and pre-production builds., • Support cost-benefit and ROI assessments for automation projects and define key performance metrics., • Assist in PPAP activities., • BEng in Mechanical Engineering or related scientific discipline., • Experience using 3D CAD (preferably Creo). If you are interested in this Manufacturing Engineer job in Kent. then APPLY NOW

Job Title - Quality Engineer Location – Cambridge Contract - 12 months Working pattern - Hybrid - Cambridge (2.5 days per week / 5 days per fortnight onsite) Salary - PAYE - £16.77 p/h up to £25.98 p/h, Umbrella - £18.79 p/h up to £29.12 p/h SRG are working with a global pharmaceutical company that are seeking a Quality Engineer to join their busy team. Key responsibilities: • Lead design control and risk management activities for combination product development programs, ensuring deliverables are appropriately authored, approved, and maintained to support clinical trials and commercial licensures., • Support and facilitation of effective risk management activities at external design companies and manufacturing facilities related to assigned projects., • Ensure combination product development activities are compliant with quality and regulatory standards, both internal and external., • Provide input and support to design validation including, but not limited to, human factors engineering assessments., • Support the assessment of external design companies and suppliers for capability of quality systems, facilities, and procedures to support device development and supply., • Support device design and manufacturing investigations from devices used in clinical trials and commercial manufacture., • Support the generation of all regulatory submission data and content for assigned device projects., • Support internal and external audits of the DCoE Quality Management System., • Identify, communicate, and develop strategies to improve combination product systems. Basic Qualifications: • BSc, MSc or PhD in appropriate science & engineering discipline (chemistry, biology, biomedical sciences, mechanical engineering, materials sciences, chemical engineering; or other related discipline) with a minimum of 2 years of relevant experience in the pharmaceutical combination product and/or device industries, • History of working in accordance with the requirements of ISO 13485, ISO 14971, 21 CFR 820, 21 CFR 4, and the EU Medical Devices Regulation., • Experience in design controls for combination products., • Device risk management expertise., • Familiar with Human Factors Engineering - Usability Engineering., • Understand project management methodologies and capable to provide technical leadership for projects., • Familiar with device assembling manufacturing processes., • Thorough working knowledge of ISO 9001, ISO 13485, ISO 14971, 21 CFR 820, 21 CFR 4, and the EU Medical Devices Regulation., • Working knowledge of EN 62366, EN 60601, and EN 62304., • Able to learn and apply established procedures in a reliable and consistent manner., • Capable of working independently with minimal supervision.

Design Engineer Permanent Position Excellent salary/package (Holiday: 25 days + 8 Statutory Days, Pension up to 9% matched, Life Assurance: 5x Basic Salary) Growing Manufacturing Business Birmingham The Design Engineer role is responsible for supporting business strategy, delivering profitable, organic growth and continuous improvement, by interacting with customers, interpreting technical specifications, and converting these into a world class product or service. The Design Engineer role is part of the Design Engineering team and involves working collaboratively with Project Management, Operations/Production, Quality and Supply Chain departments. Design Engineer Job Description • Design and engineer flow control components considering pressure, temperature, and environmental factors., • Conduct engineering analyses, calculations, and qualification/test planning for product validation., • Review and interpret FEA, CFD, and physical test data., • Ensure compliance with military, government, and internal quality and safety standards., • Support the full engineering lifecycle from concept and bid to production and testing., • Select appropriate materials and oversee product and compliance testing., • Develop prototypes and perform functional/environmental validation., • Troubleshoot failures and implement design improvements., • Produce engineering documentation, drawings (BS8888), and reports., • Collaborate with cross-functional teams for system integration., • Maintain MRP/PDM data and report progress to stakeholders., • Manage time, cost, and risk within project budgets., • Drive continuous improvement and innovation Design Engineer Essential Qualifications / Experience / Skills • Engineering Degree in a relevant discipline (Mechanical, Aerospace, Naval/Marine etc), • 5+ years’ experience in a relevant field, • Experience in creating engineering calculations and design/product validation, • Experience draughting to BS8888 standards, • Skilled in 3D mechanical design (SolidWorks preferred)

Electrical Controls Engineer Location: Barnsley, South Yorkshire Salary: Circa £60,000 (potentially higher for the right candidates) Role type: Permanent | Office-based | Full project lifecycle The Company An established UK engineering business with over 150 years of heritage, delivering complex MEICA and automation solutions across infrastructure, heavy industry and nuclear environments. Known for exceptionally low staff turnover, this organisation is built around long-term careers, technical excellence, and a genuinely supportive engineering culture. Many of the team have spent decades with the business, creating a deep pool of knowledge and expertise that’s rare to find. The Role This is a senior Electrical Controls Engineer position with responsibility for the full project lifecycle — from early concept and design through to FAT/SAT and commissioning. You’ll take ownership of a long-term nuclear-related project (initially 18 months–2 years), working closely with an experienced, close-knit controls team. The role is not software-only; strong electrical design, hardware, and systems experience is essential, with software responsibility increasing over time. Key Responsibilities • Deliver automated control systems from concept through to commissioning, • Siemens PLC / HMI / SCADA programming (Siemens used almost exclusively), • Electrical design of control panels, MCCs and distribution systems, • Production of FDS, SDS, FAT/SAT documentation and test procedures, • Attendance at FAT/SAT and occasional UK site commissioning, • Technical input into tenders, estimates and design specifications, • Ensure compliance with relevant standards and safety requirements, • Collaborate closely with mechanical, project and documentation engineers What We’re Looking For • Strong experience as a Controls / Electrical Controls Engineer, • Strong Siemens PLC background (TIA Portal), • Experience across both hardware and software delivery, • Electrical design experience (AutoCAD), • Background in control panel and MCC design, • Experience working within a turnkey project environment, • Knowledge of safety-related control systems (IEC 62061 / ISO 13849), • Nuclear project experience highly desirable, • Background progressing from electrical design into controls engineering Working Pattern & Benefits • 37.5-hour working week, • Flexible start times between 7:30am–9:30am, • Flexible finish times between from 4:00pm, • Shorter Fridays, • Office-based role in Barnsley, • Hybrid working considered on a case-by-case basis (not contractual), • 4.5% matched pension Why Consider This Role? • Long-term, technically engaging projects, • Join a business with rare levels of staff retention, • Learn from senior engineers with decades of experience, • Clear future progression as senior team members approach retirement, • Stable workload with a strong project pipeline into 2026 If you’re a senior Controls Engineer looking for proper engineering, stability, and long-term progression, this is a role worth a confidential conversation. Apply now or get in touch to find out more!

Anderson Knight is delighted to partner with a world-leading, iconic organisation in Glasgow to recruit a Senior Engineer (Buildings & Infrastructure). This is a hands-on role leading the planning, design, and delivery of building services and infrastructure projects, ensuring safe, efficient, and resilient operations. The position plays a critical role in safeguarding long-term infrastructure resilience, maintaining statutory engineering compliance, leading major capital works, and providing authoritative technical guidance to the wider business. Key Responsibilities: • Own and manage campus infrastructure, including HV/LV electrical, HVAC, fire safety, water hygiene, building fabric, and civil works., • Lead lifecycle planning, maintenance strategies, and major capital projects., • Ensure compliance with UK/EU legislation, Building Regulations, and statutory systems., • Oversee contractors, procurement, project delivery, and technical sign-off., • Provide engineering advice, risk management, and resilience planning to senior leadership., • Maintain accurate asset, compliance, and project data with clear reporting. Required Skills & Experience • Degree in Engineering (Mechanical, Electrical, Civil, or Building Services) or equivalent., • Chartered Engineer (CEng) or working towards chartership (IET, IMechE, CIBSE, ICE) preferred., • Significant experience managing complex infrastructure systems and large-scale capital projects., • Strong knowledge of UK/EU legislation, Building Regulations, and Technical Handbooks., • Proven track record delivering major engineering and infrastructure programmes., • Expert knowledge of statutory systems including HV/LV electrical, fire safety, water hygiene (L8), and asbestos management., • Strong leadership, project management, and contractor management skills.

An Amazing Career Opportunity for a Mechanical Design Engineer !!! Location: Cardiff, UK Job ID: 43946 Working in a small, versatile team, the candidate's work will involve Mechanical development of Electronic and Electro-mechanical products and sustaining activities on a range of high volume PACS RFID access products and Access Control Controllers which are sold worldwide. The candidate needs to be able to effectively manage their time to support work on a variety of products at different stages of the product's lifecycle, and to be able to collaborate well with colleagues from different departments across broad seniority, both onsite and overseas. Occasional travel may be required. Who are we? HID powers the trusted identities of the world’s people, places, and things, allowing people to transact safely, work productively and travel freely. We are a high-tech software company headquartered in Austin, TX, with over 4,500 worldwide employees. Check us out here: and Physical Access Control Solutions (PACS): HID Physical Access Control Solutions (PACS) is at the forefront of securing spaces with advanced, reliable access control solutions. From cutting-edge readers, credentials and controllers, to mobile and biometric technologies, HID PACS empowers organizations worldwide to protect their people, property and assets with scalable, high-quality solutions. This is more than just a job – it’s your chance to join an industry leader to drive innovation in access control and make a real impact on global security solutions. Essential Duties • Own Mechanical Design and Development of Physical Access reader and controllers., • Work with product management to confirm product requirements for allocated projects., • Independent / task management., • Investigating and resolving customer issues relating to readers and Controllers., • Assist with Sustaining and VAVE (Value Add / Value Engineering) tasks – cost down investigations, production efficiencies and feature improvements on current products., • Researching and implementing alternative components and solutions to assist with Contract Manufacture and Supply Chain., • Participate in high level solution discussions covering architecture, technology,, • Acting as subject matter expert for Mechanical engineering. Primary Duties • Design and development of mechanical housings and accessories – Plastic and Metal., • Work alongside Electrical design colleagues to develop mechanical solutions., • Collaborate with wider design team for Design for manufacture., • Collaborate with Tool makers and contract manufacturers., • Perform mechanical engineering test and validation on prototypes., • Support design validation group with final product testing / compliance. Preferred Qualifications • Ideally Degree level in Engineering or related subject, 5 - 10 years’ experience in Engineering., • Other qualifications and experience will be considered. Essential Skills • Use of 3D CAD software – Preferably SolidWorks – High proficiency., • 2D Engineering and assembly drawings using Solidworks., • Highly knowledgeable in plastic Injection molding and tooling (2K, over molding, etc), • Tools from 200KG to 3000KG., • Good working knowledge of metal component manufacturing (Sheet and cast)., • Good knowledge and experience of a variety of plastic and metal materials., • 2-3 years’ experience in medium to high volume mass production. Other desirable Knowledge and skills • Up to date knowledge of modern Injection molding technologies., • Working knowledge of different types of fabrication (machining, ultrasonic welding, etc)., • Simulation Tools (eg Moldflow, Thermal, Stress, etc)., • Basic knowledge of electronics, RFID, Wireless technologies., • High level of communications skills. Ability to communicate across a broad level of seniority., • Ability to effectively communicate in the English language, both verbally and in writing., • Ability to read and interpret technical journals, specifications, international technical standards (ISO, UL), etc, • Proficient in MS Office applications, such as Word, Excel, PowerPoint, etc., • Familiar with operating systems, such as Windows, etc., • Document Control (eg Engineering changes, Agile PLM), • Collaboration Tools (eg Confluence, Wiki) Work Requirements • Compliance with all relevant HID Global policies and procedures related to Quality, Security, Safety, Business Continuity, and Environmental systems., • Travel and fieldwork, including international travel may be required. Therefore, employee must possess, or be able to acquire a valid passport., • Must be legally eligible to work in the country in which you are hired. What we can offer you: • Competitive salary and rewards package., • Competitive benefits and annual leave offering, allowing for work-life balance., • A vibrant, welcoming & inclusive culture., • Extensive career development opportunities and resources to maximize your potential., • To be a part of a global organization that is pioneering the hardware, software and services that allow people to confidently navigate the physical and digital worlds. Why apply? • Empowerment: You’ll work as part of a global team in a flexible work environment, learning and enhancing your expertise. We welcome an opportunity to meet you and learn about your unique talents, skills, and experiences. You don’t need to check all the boxes. If you have most of the skills and experience, we want you to apply., • Innovation: You embrace challenges and want to drive change. We are open to ideas, including flexible work arrangements, job sharing or part-time job seekers., • Integrity: You are results-orientated, reliable, and straightforward and value being treated accordingly. We want all our employees to be themselves, to feel appreciated and accepted.

Design Engineer | Dunfermline | Permanent Escape Recruitment is working with a long-established engineering business in Dunfermline who are looking to recruit a Design Engineer to join their team. This is a great opportunity for an engineer who enjoys owning projects, working directly with customers and seeing designs through from concept to production. You will be involved in design, technical problem solving, supporting quotations and acting as a key technical contact throughout development projects. The role offers variety, responsibility and the chance to work on bespoke engineering solutions. We are keen to speak to engineers who have: • Experience in design or product engineering, • A background in mechanical related engineering disciplines, • CAD experience Apply via LinkedIn or contact Escape Recruitment for a confidential discussion.

Embedded Software Engineer | £40-80k DOE | Cambridge Are you a software engineer who wants to work with some of the most high-tech companies in the world? One of the UK’s leading consultancies is hiring software engineers to join their high-growth, driven, and extremely motivated team. They partner with clients from leading global brands to startups to identify growth opportunities through innovative solutions, taking pride in their success. They operate as a meritocracy and give leadership responsibilities based on skill rather than length of service. You can get promoted rapidly depending on your skill. Responsibilities as an Embedded Software Engineer: • Design and develop software applications and control algorithms using OO languages (C# and C++) and/or embedded code (C), • Collaborating with electronics, mechanical and systems engineers to integrate software with hardware components and robotics platforms Technical requirements for an Embedded Software Engineer: • Proficiency in C/C++, C#, or .NET for PC application development, • Experience developing ARM Cortex MCUs, • Professional experience utilising Docker containers, • Strong understanding of software development lifecycle and version control (e.g., Git). Desirable experiences for an Embedded Software Engineer: • Experience with IEC 62304, ISO 13485, or FDA 21 CFR Part 820, • 3+ years of experience in a regulated industry Apply today to join a highly innovative and world renowned consultancy!

Shape the future of safety-critical technology. Join a fast-growing medical technology challenger brand driving innovation in medical technology and beyond. This is your opportunity to work on systems that truly matter: life-supporting and life-critical solutions, while building a career that can progress to Principal level and beyond. As a Senior Systems Engineer, you will be at the heart of next-generation product development and sustaining engineering. You will lead risk management and systems architecture across multidisciplinary teams (software, electronics, and mechanical) ensuring compliance with the highest safety standards. Your expertise will influence strategic decisions and technology roadmaps for future products. Responsibilities: • Own system requirements and architecture for complex, safety-critical systems, • Drive risk management activities (FMEA, hazard analysis) and ensure compliance with all relevant standards, • Collaborate with V&V, Quality Assurance, and Regulatory Affairs to deliver robust, compliant solutions, • Lead design reviews, verification and validation, and continuous improvement initiatives, • Shape technology roadmaps and contribute to next-generation product innovation, including GUI interfaces, cloud connectivity, and cybersecurity for sensitive data Requirements: • Systems engineering experience with complex systems or devices, • Preferably software engineering background (or electronics), • Degree in engineering or related discipline., • Proven experience in systems engineering within regulated, safety-critical industries: medical devices, defence, nuclear, or aerospace., • Strong background in requirements management, risk analysis, and system architecture, • Ability to work across multiple domains and disciplines., • Experience working in mid-sized company Why Join our client? • Hybrid working: 3 days on-site in Croydon, 2 days remote, • Modern, purpose-built offices with advanced labs, • Visa sponsorship for UK, • Competitive salary and clear career progression Make an impact where it matters most. Apply today and take your career to the next level.

Job Title: Mechanical Engineer Location: Plymouth, Devon + Hybrid Working Arrangements Compensation: From £43,935 Depending on Experience + Benefits Role Type: Full time / Permanent Role ID: SF67948 Design the Future of Defence Infrastructure At Babcock we’re working to create a safe and secure world, together, and if you join us, you can play your part as a Mechanical Engineer at our Devonport Royal Dockyard site. The role As a Mechanical Engineer, your expertise will directly contribute to national security and public safety, while advancing your career in a dynamic engineering environment. Day-to-day, you’ll be at the forefront of designing and configuring mechanical handling systems that support some of the UK’s most critical defence infrastructure. You’ll provide technical authority and design consultancy for cranes, lifting equipment, and other mechanical handling assets across our Devonport site. • Providing technical authority for mechanical handling systems., • Delivering design consultancy for new capabilities and modifications., • Supporting maintenance and configuration of existing systems., • Collaborating with project teams to ensure timely delivery., • Demonstrated experience in the design and substantiation of mechanical systems and components., • Strong understanding of engineering regulations, legislation, and standards., • Proficiency in hand calculations and finite element analysis (FEA)., • Ability to interpret and produce mechanical and electrical engineering drawings., • Degree in Mechanical Engineering or extensive proven experience., • Generous holiday allowance, • Matched contribution pension scheme, with life assurance, • Access to a Digital GP, annual health check, and nutritional consultations through Aviva DigiCare+, • Employee share scheme, • Employee shopping savings portal, • Payment of Professional Fees, • Reservists in the armed forces receive 10-days special paid leave, • Holiday Trading is a benefit that allows UK Babcock employees to buy additional leave or to sell up to one working week of annual leave from their annual entitlement. This Window opens February through to March annually, • ‘Be Kind Day’ enables employees to take one working day's paid leave a year (or equivalent hours) to undertake volunteering work with their chosen organisation or registered charity #BABDESTNUC

Hims & Hers is the leading health and wellness platform, on a mission to help the world feel great through the power of better health. We are redefining healthcare by putting the customer first and delivering access to care that is affordable, accessible, and personal, from diagnosis to treatment to delivery. No two people are the same, so we provide access to personalized care designed for results. By normalizing health & wellness challenges and innovating on their solutions, we’re making better health outcomes easier to achieve. Hims & Hers is a public company, traded on the NYSE under the ticker symbol “HIMS.” To learn more about the brand and offerings, you can visit hims.com/about and hims.com/how-it-works . For information on the company’s outstanding benefits, culture, and its talent-first flexible/remote work approach, see below and visit . About The Role We are seeking a hands-on and detail-oriented Project Engineer to lead construction, cleanroom installation, and facility enhancement projects across pharmaceutical compounding and warehousing operations in the UK. This role will be pivotal in coordinating design, construction, and installation activities — including cleanroom buildouts, office renovations, warehouse racking, and signage — ensuring full compliance with EU GMP Annex 1, ISPE, and MHRA requirements. The ideal candidate will have a strong background in engineering project execution and proven experience managing vendors, contractors, and cross-functional teams (Safety, Operations, Quality, and Validation). You Will Project Execution & Oversight: • Oversee and execute multiple capital and renovation projects including cleanroom construction, warehouse layout upgrades, office refurbishments, and racking or signage installations., • Develop and manage detailed project plans, budgets, and timelines ensuring scope, cost, and schedule adherence., • Conduct site supervision, contractor coordination, and progress inspections, maintaining high standards of quality and safety., • Lead commissioning and qualification readiness, supporting IQ/OQ/PQ documentation for cleanroom and utility installations., • Participate in design and layout review meetings for cleanrooms, HVAC systems, material flow, and warehouse operations., • Coordinate with architects, mechanical/electrical consultants, and validation engineers to align technical specifications and design intent., • Review design documentation, drawings, and vendor submissions to ensure compliance with EU GMP, ISPE, and MHRA expectations., • Source, assess, and coordinate construction vendors, cleanroom installers, and equipment suppliers through all project phases., • Review and evaluate vendor proposals, bids, and FAT/SAT documentation for adherence to design and GMP standards., • Track punch list completion, deviation management, and change control through structured review processes., • Partner closely with Safety and Operations teams to uphold UK HSE and Construction (Design and Management) Regulations (CDM 2015) compliance., • Liaise with Quality Assurance and Validation teams to ensure facility readiness for regulatory inspections and audits., • Prepare and maintain comprehensive documentation: project charters, RFIs, meeting notes, change control logs, deviation reports, and as-built records., • Ensure engineering drawings and construction documentation align with ISPE guidelines., • Bachelor’s degree in Mechanical, Electrical, Industrial, or Chemical Engineering, or equivalent technical discipline., • 5+ years of experience delivering engineering or construction projects within pharmaceutical, life sciences, or cleanroom environments., • Proven experience with construction and equipment installations, and facility upgrades., • Working knowledge of: EU GMP Annex 1 and Annex 15 (Qualification & Validation), ISPE, MHRA Orange Guide, UK Building Regulations, and HSE/CDM 2015 compliance., • Strong understanding of GMP, validation lifecycle, and commissioning principles., • Proficiency in AutoCAD, MS Project, and Microsoft Office Suite., • Excellent communication, stakeholder management, and problem-solving skills., • Experience in warehouse layout design, industrial racking systems, or facility automation projects., • Competitive salary & equity compensation for full-time roles, • PTO and company holidays, • Employee Stock Purchase Program (ESPP)

Overview Do you want to bring the new vision of nuclear energy to reality? At AtkinsRéalis, one of the world's leading multi-disciplinary consultancy firms for engineering, design, and construction, we offer unparalleled opportunities for talented individuals in search of a rewarding career. Here, we provide more than just a job; we offer an opportunity to make a difference and shape the world for future generations and the environment. Following a very successful 2024, AtkinsRéalis is looking for a talented Intermediate Electrical Engineer to support a variety of exciting projects, including Hinkley Point C (HPC), Sizewell C (SZC), Small Modular Reactors (SMR), and defence-based work. You'll be joining a friendly and rapidly growing Integrated Engineering Solutions (IES) team within the Power New Build part of our business. This team specializes in supporting the delivery of nuclear new build projects for major operators in the nuclear sector. Additionally, you will work on advanced technologies for fusion power stations, including ITER and T1E, contributing to the development of cutting-edge solutions in the nuclear energy sector. Your Role Responsibilities As an Intermediate Electrical Engineer, you will be responsible for providing consultancy services to our clients. This includes and not limited to: • Developing and reviewing electrical system designs, ensuring they meet project requirements and industry standards., • Conducting feasibility studies and technical assessments to identify optimal solutions for electrical systems., • Preparing detailed specifications, calculations, and technical reports., • Providing technical guidance and support during the construction, installation, and commissioning phases of projects., • Ensuring compliance with health, safety, and environmental regulations., • Collaborating with clients to understand their needs and deliver tailored solutions., • Assist in the design, optioneering, evaluation, and assessment of electrical systems, ensuring compliance with industry standards., • Collaborate with multi-disciplinary teams, including Mechanical, Process, and Civil/Structural engineers, to support project delivery., • Provide technical support and contribute to the resolution of project challenges., • Participate in project meetings and contribute to the development of project plans and schedules., • Support the preparation of technical documentation, including reports, specifications, and drawings., • Bachelor's degree level qualification in electrical/electronic engineering, mechatronics, building services, or engineering mathematics, or a related field., • Relevant experience in electrical engineering, preferably within the nuclear or energy sector., • Strong problem-solving skills and the ability to work collaboratively in a team environment., • Good communication skills and the ability to present technical information clearly., • Eager to learn and develop professionally, with a proactive approach to work.

Field Service Engineer Mechanical / Electrical in Hazardous Area Systems Location: South Yorkshire base and UK Field-Based (company vehicle provided) Salary: £35,000 - £40,000 DOE + overtime + company van Hours: Monday - Friday, core hours with paid overtime The Company A specialist engineering business delivering electrical, instrumentation and fluid-handling systems into safety-critical environments across the UK and internationally. They design, engineer, integrate and support complex assets from concept and build through to testing, commissioning and handover, working with both industrial and commercial clients. Their reputation is built on technical integrity, quality delivery and practical engineering excellence. The Opportunity This is a field-based Service Engineer role within a specialist engineering business supporting fuel, fluid-handling and hazardous-area systems across customer sites throughout the UK. You’ll be responsible for carrying out planned servicing and preventative maintenance, with some reactive work, on safety-critical equipment in regulated environments. The role suits someone practical, reliable, and comfortable working independently on customer sites. The majority of work is planned and scheduled for you, allowing you to focus on delivery rather than chasing work. You’ll be provided with a fully equipped company van and distances between sites can be significant, this is a true field role. What You’ll Be Doing • Carrying out planned servicing and maintenance on customer systems, • Undertaking reactive fault-finding when required, • Working on mechanical equipment with associated electrical fault diagnosis, • Producing clear service reports and customer documentation, • Completing permits, RAMS, and site paperwork, • Providing remote diagnostic support when not on site, • Supporting workshop build and functional testing when site work allows, • Fuel and fluid-handling systems, • Pumps, valves, pipework and associated equipment, • Electrical systems in hazardous areas What We’re Looking For You’ll be a hands-on engineer who takes pride in safe, reliable work. Essential: • Experience in service, maintenance or field engineering, • Mechanical repair experience with electrical fault-finding capability, • Comfortable working on live equipment in hazardous areas (with guidance), • Ability to work independently and manage your own time, • Strong safety awareness and documentation discipline, • Full UK driving licence and right to work in the UK Highly desirable: • Hazardous area training (CompEx awareness beneficial), • Experience with pumps, valves and pipework, • IT-literate and comfortable completing reports digitally, • MEWP / PASMA / IPAF (training provided if needed), • Safety Passport (preferred, not essential) Why This Role Appeals • Very high proportion of planned work, • Minimal sales or scheduling responsibility, just turn up and do the job, • Company van provided, • Stable workload in safety-critical environments, • Supportive team structure with guidance available, • Overtime paid properly Interested? If you’re a practical, safety-conscious field engineer who enjoys autonomy and variety, this is a solid long-term opportunity within a specialist engineering environment.

Role description At Tata Technologies we make product development dreams a reality by designing, engineering and validating the products of tomorrow for the world’s leading manufacturers. Due to our continued growth we are now recruiting for a Lead Engineer – Underfloor Systems to be based at our customer’s site in Gaydon. Our Engineering Research and Development department (ER&D) is a fast growing function within Tata Technologies Limited that is assembled to work on exciting projects globally for multiple customers. It comprises highly specialized engineers across Automotive, Aerospace and Industrial Heavy Machinery. The Role: As the Lead Engineer for Underfloor Systems, you will be responsible for the design, development, and integration of all underbody components beneath the vehicle floor. This includes structural panels, aerodynamic shields, NVH treatments, thermal protection, and mounting interfaces. You’ll lead cross-functional teams to ensure these systems meet performance, durability, and manufacturing requirements while supporting vehicle safety, efficiency, and refinement. Area of Responsibility System Ownership: · Lead the engineering development of underfloor systems including floor pans, tunnel reinforcements, heat shields, aerodynamic panels, and NVH insulators. · Ensure robust integration with chassis, powertrain, exhaust, and body structures. Cross-Functional Collaboration: · Work closely with Vehicle Architecture, Manufacturing, Thermal, NVH, and Safety teams to deliver optimized solutions. · Support virtual builds, physical prototypes, and launch activities across global sites. Supplier & Material Management: · Engage with Tier 1 and Tier 2 suppliers to manage tooling, materials, and delivery timelines. · Evaluate and approve materials for weight, cost, corrosion resistance, and thermal performance. Performance & Compliance: · Ensure underfloor systems meet crashworthiness, thermal shielding, aerodynamic, and acoustic targets. · Validate compliance with global safety and environmental regulations. Innovation & Sustainability: · Drive adoption of lightweight materials, modular designs, and sustainable manufacturing practices. · Explore new technologies such as active aero panels, composite shields, and recyclable insulators. Issue Resolution & Quality: · Lead root cause analysis and resolution of engineering issues during development and post-launch. · Support warranty investigations and continuous improvement initiatives. Knowledge / Experience · Bachelor’s or Master’s degree in Mechanical Engineering, Automotive Engineering, Materials Science or related discipline. · Strong experience in automotive body or chassis systems, with a focus on underfloor components. · Strong proficiency in CAD tools (e.g., CATIA V5), PLM systems (e.g., Teamcenter), and CAE validation processes. · Proven leadership in cross-functional teams and supplier engagement. · Excellent communication, project management, and problem-solving skills. In return for bringing your expertise to our business we offer a competitive salary along with excellent benefits including: · Pension Scheme – We match employee contribution up to 5% of salary · 25 Days’ Holiday · Private Health Care · Tata Jaguar Land Rover Privilege Scheme - up to 20% off new JLR vehicles · Group Income Protection · Health Assured – Employee Assistance Program · Group Life Assurance · Health Shield – Private Health Cash Plan If you are passionate about bringing innovation to the projects you work on and want to join a global company, then this is the place for you. Tata Technologies: Engineering a better world. Tata Technologies would like to thank all applicants for their interest, each application will be reviewed against the set criteria for the role. We would like to advise that only candidates under consideration will be contacted. If you do not hear from us within 10 working days following the closing date it will mean that unfortunately your application has not been successful. We will however retain your details for any suitable future opportunities.

Job Title: Mechanical Design Engineer Location: York Salary: £30,000 – £35,000 per annum We are currently seeking a Mechanical Design Engineer to join a well-established engineering and manufacturing company based in York. This role offers the opportunity to work on a variety of machinery and automotive-related projects, with a strong focus on fabrication and sheet metal design. Key Responsibilities: • Design mechanical components, assemblies, and machinery using SolidWorks., • Produce detailed 2D fabrication drawings and 3D models., • Design sheet metal components and welded fabrications to manufacturing standards., • Support machinery and automotive design projects from concept through to manufacture., • Liaise with fabrication and production teams to ensure designs are practical and cost-effective., • Generate BOMs and technical documentation., • Support prototype builds, testing, and design improvements. Skills & Experience Required: • Strong experience using SolidWorks (essential)., • Background in mechanical design within fabrication, machinery, or automotive environments., • Medium-level experience with fabrication and sheet metal design., • Good understanding of manufacturing processes including welding and machining., • Strong attention to detail and problem-solving skills., • Ability to work independently and as part of a team., • Relevant qualification in Mechanical Engineering or similar. If you’re a Mechanical Design Engineer looking for a role offering technical variety and hands-on involvement, please apply or contact Charlotte White at for more information.

Mechanical Project Engineer - Leicester - Hybrid - Paying up to £50,000 depending on experience + Car + Bonus About the Company Due to rapid growth, we are working with a well-established engineering business based in Northamptonshire on their hunt for a Project Engineer! The company specialises in mechanical and ventilation projects across a variety of industries. They have a fantastic reputation and a close-knit, collaborative culture where teamwork, initiative, and hands-on involvement are highly valued. This role is hybrid but would require once a week in the office in Northamptonshire. The successful candidate must have a full, clean driving licence. Mechanical Project Engineer - The Details • Paying between £45,000 and £50,000 depending on experience, • Brand new company car, • Uncapped commission, • Various perks and benefits, • Flexible working Mechanical Project Engineer - Responsibilities & Requirements • Manage projects end-to-end: enquiry handling, site visits, specification, design, quoting, scheduling, installation, and customer handover, • Work with the Project Coordinator to plan projects, create Gantt charts, and manage resources and timelines., • Liaise with clients, ensuring clear communication and smooth project delivery., • Support the team where needed, with shadowing at the start to learn internal processes., • Take ownership of your projects, maintaining oversight from start to finish., • Travel to client sites within ~1 hour of Northampton (national projects may arise)., • Proven experience in project engineering or mechanical design, ideally within ventilation, dust, or fume extraction systems., • Strong technical knowledge, including design and specification of systems; AutoCAD/3D software experience is a plus, • Highly proactive, confident in following up on opportunities and closing deals., • Excellent organisational, communication, and presentation skills., • Ability to work independently and as part of a team in a dynamic, fast-paced environment, • Full UK driving license., • Personality and attitude are key: collaborative, hands-on, and able to fit into a close-knit, high-performing team. About Us Detail2Recruitment acts as an employment agency in respect of this position. Due to the volume of applications we receive, we are unable to give feedback on unsuccessful applications. For information on how we use your personal information, please refer to detail2recruitment privacy policy

We are using AI to accelerate due diligence and deepen insights for Private Equity funds. We are hiring a full stack engineer who is comfortable contributing to all layers of the application and developing features end to end. About Capsa AI Empowering Private Equity with Advanced AI – Capsa AI is an operating system that aggregates, structures, and generates insights from company and market data. Our AI solutions reduce time spent on mechanical tasks and increase returns by analysing vast amounts of data to provide clear, actionable insights. Our vision is to become the leading AI platform for private capital funds, transforming how private investments are analysed and managed. Our Team and Progress Our founding team has deep domain expertise in Private Equity and AI. Our CEO, Danyal, has over 6 years of experience in Private Equity and Investment Banking at blue-chip financial institutions such as AEA Investors, Citigroup, and Deutsche Bank. Our CTO, Callum, has over 6 years of experience in Machine Learning and AI, having worked at leading defense companies like QinetiQ and retail tech startups such as Standard AI. The entire team are early stage startup veterans, with a passion for building great products. Just one year after our December 2023 founding, we are already generating revenue, serving top-tier PE funds managing over £30 billion across the US, UK, and Germany. Furthermore, we’ve raised over £1.8 million in funding from prominent fintech venture capitalists and private equity angels, underscoring the confidence of industry leaders in our vision and potential. Our Philosophy • Small team: Small talented teams outperform large and slow-moving companies. We avoid bureaucracy, keep meetings to a minimum and focus on creating value., • Simple where possible: We are passionate about new technology (in particular Machine Learning and AI), but we are more passionate about solving problems for our customers. We strive to find the best solution, be it cutting-edge or old-school., • Customer obsessed: We take every opportunity to talk to our customers. We obsess over their problems and work every day to make them happy. About the Role We are looking for a full stack engineer who wants to help shape the future of private equity and our company. As an early stage engineer you will: • Work directly with our founding team., • Help design our application architecture., • Ship features that our users care about, wherever they are in the stack., • Participate in strategy and product ideation sessions, influencing our product roadmap. Working at Capsa AI will be hard work, it will be messy and at times it will be stressful. However, you will: • Experience the process of taking the company from 0.5 to 1., • Shape the company's vision and will have a direct impact on its success., • Have the opportunity for fast career growth., • Have the opportunity to participate in the upside of an ultra-growth venture., • Have fun 🙂 Apply if: • You have experience with our stack: Python, FastAPI, Postgres, SQLAlchemy, Alembic, Typescript, React, LlamaIndex / LangChain, PyTorch, HuggingFace, OpenAI, Docker, Azure,, • You have taken entire products or features from ideation to deployment and you’ve measured their impact., • You enjoy diving deep into the domain, understanding the problem, and focusing on delivering value to the customer., • You thrive in a fast paced environment., • You like to take ownership and work independently., • You are excited about joining an early-stage venture. Don’t apply if: • You want to work on a single layer of the application., • You prefer to work on well-defined problems., • You need clear, pre-defined processes., • You prefer a low-pressure environment. Company Benefits • Private healthcare insurance., • One month per year remote working., • Budget for setting up your Home-Office. Interview Process 1. 25 minute call with Callum (video call), 2. Coding Session (video call), 3. Systems Design Session (video call), 4. Meet the team (in-person)

Project Assistance – Tailoring design standards to meet specific project needs - Inputting into initial stages of projects at business case and feasibility stages; assisting appointed Project Sponsors and Project Managers throughout design stages, attending design meetings as required; advising

A Mechanical Electrical (ME) Design Engineer for mission-critical product. Role is to design robust system for high-stakes environment focusing on reliability, redundancy, and performance, blending mechanical (enclosures, thermal, structures) and electrical (power, control, distribution, HVAC) exper

Key responsibilities for this Principal Mechanical Design Engineer role based in Hampshire: Lead mechanical design and development, from customer specifications through to delivery of high-quality, on-time solutions Produce and maintain technical documentation, including drawings, test plans, and r

The Mechanical Design Engineer will ideally have the following attributes: Degree / HNC / HND / BTEC / NVQ qualified in Mechanical Engineering or similar At least 2 years’ experience in a similar Design Engineering / CAD Operation position Previous experience in a similar role in a manufactur

If youre experienced, commercially aware, and confident working with pressure systems and industry design codes, this role is for you. Deliver high-quality design outputs on time and within budget. Take part in design reviews, risk assessments and technical problem-solving.

Key Requirements and Responsibilities: * Manage the design of products ordered by a customer * Liaison directly with customers as & when necessary * Detail component and assembly design using 3D design software Preferred Design Software - Inventor * Produce design or technical documentat

The Senior Mechanical Design Engineer will ideally have the following attributes: Degree / HNC / HND / BTEC / NVQ qualified in Mechanical Engineering or similar At least 3 years’ experience in a similar Design Engineering position Previous experience in a similar role in a manufacturing envir

The Person: * Minimum HNC in Engineering * At least 2 years of experience in mechanical design, open to junior, graduate, and senior-level engineers. White Label Recruitment are very excited to be working with an extremely reputable and market leading manufacturing company who are industry lea

Work as part of a mechanical team which designs mechanical assemblies for bespoke motions control simulation systems. Design moderately complex System Elements and produce the manufacturing packages along with the hydraulic schematics to allow procurement.

Our client, an engineering & manufacturing company based between Bradford and Halifax, have an immediate requirement to recruit a well versed Mechanical Design Engineer. As part of our continued growth and expansion, as well as being awarded various significant contracts, an excellent opportunity ha

Due to large investment and new projects, there is now scope for a skilled Mechanical Design Engineer to join a highly-skilled M&E division. A UK leading Renewables & Energy specialist in West Yorkshire are looking for a Mechanical Design Engineer. Mechanical Design Engineer Requirements:.

Senior Mechanical Design Engineer. Senior Mechanical Design Engineer. Collaborate with the mechanical design team to create assemblies for bespoke motion-control simulation systems.

Principal / Senior Mechanical Design Engineer - Drone / UAV (Engine Integration) - Hampshire - £65k. Principal / Senior Mechanical Design Engineer – Engine Integration. Senior or Principal Mechanical Design Engineer.

If you're a design engineer, then it's a given you've a passion for engineering, an eye for detail, and you love to create a solution. As our new design engineer, you'll have plenty of experience in a relevant industry; take a look at our products and you'll know whether it's