Power systems engineer jobs in Walton On ThamesCreate job alerts

Drumgrange is seeking an experienced and collaborative Electronics Test Engineer to join our inclusive team. This Electronics Test Engineer role is based in Chertsey on a 37.5 hr per week contract for 6mths. As an experienced Electronics Technician, you will support our skilled engineering and manufacturing teams to supply high-quality products and systems to the Defence Industry. The successful candidate will be experienced in production inspection, testing and fault finding for electronic modules, units, systems and spares. The role is created to meet deadlines on a high-profile project which requires time management and strong communication. Reporting to: Functional Lead What you’ll do In the Electronics Technician role, you can expect to: • Perform IPC-level inspections of electronic assemblies before the test or as part of the production cycle, • Execute formal test documentation, including recording of results—hardware, software and firmware programme configuration, • Ensure all H&S requirements are met, and the assembly area is maintained as a safe, clean and tidy working environment, • Responsible for maintaining a high quality of work to deadlines provided by the business, • Responsible for recording details of defects found, • Responsible for adhering to the company’s policies and procedures, • Take measurements using common range test equipment, • Provide feedback for test documentation discrepancies, • Become familiar with the operating system and timely record all results and keep an up-to-date narrative What you’ll need To apply for this role you will need • Previous experience working on Defence projects,, • IPC level inspection certification,, • BTEC Electronics qualification (ONC/HNC/HND) or equivalent. You will also require the following: • Broad experience in using test equipment, including digital oscilloscopes, Spectrum Analysers, Function Generators, Multimeters and Power Supplies, • Ability to maintain several production test and reference facilities, • Experienced in problem-solving, fault finding and repair down to the component level for analogue and digital designs, • Familiarity with Microsoft Office products, • SC Cleared, • Previous experience in a manufacturing environment, • Previous experience working to high standards against deadlines, • Previous experience dealing directly with engineering teams Key Must Have skills: (minimum of 5) • Ability to obtain UK security clearance, • Minimum of 3 years’ experience in a technical test role., • Advanced technical experience in manual testing.., • Proficient with use of hand tools and test equipment., • Ability to read and understand electronic and mechanical drawings., • Knowledge of electronic Components., • Ability to create detailed documents against specifications and drawings, • A basic understanding of electrical & electronics requirements., • Strong communication skills, • Good at multi-tasking, • Computer proficient with office 365 and the ability to pick up software programmes quickly., • Self-motivated and able to work independently with minimal supervision, • An enthusiastic self- starter who wishes to learn, develop and progress., • A basic understanding of electrical & electronics requirements., • Strong communication skills, • Good at multi-tasking, • Computer proficient with office 365 and the ability to pick up software programmes quickly., • Self-motivated and able to work independently with minimal supervision, • An enthusiastic self- starter who wishes to learn, develop and progress. Key Nice to Have skills: • Advanced rework skills down to component level, track repair, • Fault finding down to component level, • Understanding of circuit diagrams, • Out the box approach to problem solving

We are actively recruiting for a Multi skilled Electrical Engineer to work on an exciting and diverse contract focused on maintaining critical infrastructure. This role offers an excellent opportunity to work in a dynamic environment where no two days are the same Key Responsibilities: • Low Voltage (LV) Distribution: Maintenance and oversight of LV distribution systems., • Generator & Fuel System Maintenance: Ensuring power systems and fuel mechanisms are functioning reliably., • UPS & Batteries: Routine checks and maintenance of Uninterruptible Power Supplies and battery systems., • Lighting & Emergency Lighting: Upkeep of lighting systems, including emergency lighting to ensure safety and compliance., • Heating, Ventilation & Air Conditioning (HVAC): Maintenance of HVAC systems to guarantee efficient operation., • Fire and Intruder Systems: Regular maintenance and troubleshooting of fire alarms and intruder detection systems., • Water Hygiene: Ensuring water systems meet hygiene standards and comply with regulations., • Lightning Protection: Maintenance and testing of lightning protection systems to safeguard infrastructure., • Building Maintenance & Site Infrastructure: General maintenance of buildings and associated infrastructure, including grounds keeping tasks.

Area Sales Manager / Sales Manager / Business Development Manager required to join a leading manufacturer of Automation and Pneumatic Components. The successful Area Sales Manager / Sales Manager / Business Development Manager will work fully remote, responsible for new business development and key account management, selling pneumatic / automation / linear motion products and systems, primarily covering the South of the UK. This role will transition into Sales Leader / Sales Manager role. The Area Sales Manager / Sales Manager / Business Development Manager will ideally have experience selling mechanical or automation related products or solutions,such as linear motion, actuators, pneumatics, conveyors, valves, motors, power transmission, gearboxes, MRO, rotating equipment or similar. Package £50,000 - £55,000 Progression to UK Sales Manager Bonus Company car Pension contribution 25 days holiday plus bank holidays Phone, laptop plus additional benefits Area Sales Manager / Sales Manager / Business Development Manager Role Selling pneumatic / automation / linear motion products and systems, primarily covering the South of the UK. This role will transition into Sales Leader / Sales Manager role. Be responsible for the management of 3 to 4 external sales engineers. Manage and grow existing relationships as well as new business development selling engineered pneumatic / automation / linear motion products into various industries. Identify and develop new linear motion sales opportunities through demonstration, exhibition, and negotiation. Liaise with various engineering departments Fully remote role covering primarily the South of the UK. Area Sales Manager / Sales Manager / Business Development Manager Requirements Experience as a Key Account Manager, Account Manager, Area Sales Manager, Sales Engineer, Business Development Manager, Technical Sales Engineer, Sales Representative or similar having sold a technical mechanical engineering product. Experience selling linear motion, actuators, pneumatics, conveyors, valves, motors, power transmission, gearboxes, MRO, rotating equipment or similar would be preferred. Experience of directly managing sales teams would be highly desirable. A technical qualification (Apprenticeship, HNC, HND or Degree) is advantageous though not a necessity. Full clean driving licence. Willingness to travel, primarily across the South of the UK. TPBN1_UKTJ

Maintenance Supervisor Sunbury on Thames, Surrey £47,000 An exciting opportunity has arisen for a Maintenance Supervisor to work for a leading FM service provider on a commercial building in Sunbury-on-Thames, Surrey. Working for a highly esteemed maintenance provider, this is a fantastic opportunity for an Engineer looking to step into Contract Management, as the role will involve working closely with the Contract Manager on site. You will be responsible for both planned and reactive maintenance across electrical, mechanical, HVAC, and associated building systems, including remedial works and emergency response. The successful candidate will be Electrically qualified, holding City & Guilds / NVQ qualifications, and be multi-skilled with strong all-round building services maintenance knowledge. Duties PPMs & reactive maintenance Single & Three Phase Power Motors, Generators (on/off load tests) UPS systems LV/HV switching, shutdowns, and switchgear Emergency lighting and fire alarm testing AHUs, FCUs, VAVs Sprinkler systems, pumps, belts, bearings, seals BMS operation Isolation of plant and systems in line with safety requirements Ensure corrective and repair works comply with regulations Promote safe working practices and quality standards Organising subcontractors Completing logbooks and RAMS Producing reports Conducting client meetings Keeping the Account Manager regularly updated Liaising with client representatives regarding corrective works Permits to Work Raising and closing jobs via PDA Requirements City & Guilds / NVQ (or equivalent) in Electrical Installations Proven ability to lead a day-shift engineering maintenance team Strong building services maintenance experience Career-driven and motivated Polite, professional, and personable Salary & Benefits £47,000 per annum Monday to Friday, 8:00am – 5:00pm 25 days holiday Pension package Plenty of overtime available On-site parking Training provided Excellent internal progression opportunities TPBN1_UKTJ

Commissioning Engineer c£55k - £60k + overtime + benefits East Midlands / London (Hounslow / Heathrow Airport) Our client has been established for more than 30 years and is renowned as a market leader in the provision of innovative and bespoke integrated systems, primarily to the transportation, airport and power infrastructure industry, and as a result of continued success and an ongoing planned programme of strategic growth, they are now seeking to recruit a number of experienced Commissioning Engineer professionals to complement their established and successful team of electrical and control professionals. Working a combination of days and nights, (primarily at London Heathrow in Hounslow), the role of Commissioning Engineer works alongside the project team and the development engineers during the commissioning stages of multiple projects and ensuring a smooth handover to the customer. Ideally with a background in the control system industry, core duties will include (but not be limited to): Checking installation of equipment is to the correct standard prior to starting testing. Performing testing of a system according to the Installation and Commissioning Test document. PLC data input tests including verification of operation to and from plant and field devices into PLCs. Field device set-up Performing site acceptance tests, fault find and correction of any PLC code or wiring issues. Producing documentation such as RAMs; test documentation; weekly progress reports etc. Attending site progress meetings, toolbox talks etc and providing professional representation of the business especially during client-facing test conditions.To be considered for these varied and challenging Commissioning Engineer positions offering genuine scope for career progression and development, it is envisaged that successful candidates will demonstrate at least 2 years relevant commissioning work experience and be qualified to at least level 3 Apprenticeship, City & Guilds or above in electrical or control engineering. Essentially you will hold a full UK driving licence and have no criminal convictions due to security clearances required by airport authorities. In return and in addition to a generous salary negotiable based on experience, benefits include 33 floating holidays to take when you like with your entitlement increasing by an additional 2 days every 5 years, paid overtime, a Company performance-related bonus as well as Health & Wellbeing benefits, Pension scheme, Anniversary celebrations and Social events as well as a Flexible working hours scheme. Contact the Service Team at Premier Technical Recruitment on (phone number removed) or email your cv in confidence to for further details

Maintenance Supervisor Sunbury on Thames, Surrey £47,000 An exciting opportunity has arisen for a Maintenance Supervisor to work for a leading FM service provider on a commercial building in Sunbury-on-Thames, Surrey. Working for a highly esteemed maintenance provider, this is a fantastic opportunity for an Engineer looking to step into Contract Management, as the role will involve working closely with the Contract Manager on site. You will be responsible for both planned and reactive maintenance across electrical, mechanical, HVAC, and associated building systems, including remedial works and emergency response. The successful candidate will be Electrically qualified, holding City & Guilds / NVQ qualifications, and be multi-skilled with strong all-round building services maintenance knowledge. Duties PPMs & reactive maintenance Single & Three Phase Power Motors, Generators (on/off load tests) UPS systems LV/HV switching, shutdowns, and switchgear Emergency lighting and fire alarm testing AHUs, FCUs, VAVs Sprinkler systems, pumps, belts, bearings, seals BMS operation Isolation of plant and systems in line with safety requirements Ensure corrective and repair works comply with regulations Promote safe working practices and quality standards Organising subcontractors Completing logbooks and RAMS Producing reports Conducting client meetings Keeping the Account Manager regularly updated Liaising with client representatives regarding corrective works Permits to Work Raising and closing jobs via PDA Requirements City & Guilds / NVQ (or equivalent) in Electrical Installations Proven ability to lead a day-shift engineering maintenance team Strong building services maintenance experience Career-driven and motivated Polite, professional, and personable Salary & Benefits £47,000 per annum Monday to Friday, 8:00am – 5:00pm 25 days holiday Pension package Plenty of overtime available On-site parking Training provided Excellent internal progression opportunities

Our client is one of the worlds leading data centre specialists who maintain data centres in the UK, Europe and World Wide. They now have an opportunity for a M&E Shift Engineer to join the team on a permanent basis. Responsibilities: • Maintaining and keeping in good repair, the buildings mechanical & electrical systems along with all associated component parts of Data Centres. * Routine tests, checks and record keeping for all the buildings systems * Maintain water systems and all records to the highest standard in accordance with L8 Legislation. * Undertake daily walk rounds of client areas and plant rooms to note and rectify any defects and to maintain Plant rooms in a clean, tidy and safe condition. * Liaise and arrange sub contractor support and effectively manage and control all sub-contractors, including cleaning. * To monitor the buildings environmental temperature, humidity, and space conditions and ensuring that they are maintained in accordance with the business requirement * To monitor and adjust as deemed necessary, the building management systems (BMS) to control the buildings HVAC to optimal levels of efficiency. * Provide rapid and effective response to customer and helpdesk calls and defects. * Provide innovative solutions to improve building, plant and system energy efficiency. * Manage, rectify and record defects through the Help Desk to ensure all are rectified within SLA timeframes. * Keep the Shift Manager and Operations Manager briefed on all issues and progress. * Raise hazard, incident and flash reports * Use the Log Book System to store all records and certification for the site. * Manage defects to completion; including full investigation, sourcing materials, provision of quotes, raising of Purchase Orders and arrangement of rectification. They are looking for a Shift Engineer. Salary upto £58,500 + bonus Continental Shift (4on, 6off, 4on, 4off, 6on, 4off......14 shifts per 28 days) Overtime Available at 1.5x hourly rate Pension 20 Shift Days Holiday Cycle to work Scheme Life AssuranceThere will also be a great opportunity to progress within supervisory and management positions etc. To be considered for the post you will need to have relevant electrical qualifications and experience in a similar role carrying out building services maintenance in a critical environment. City and Guilds, NVQ or equivalent is essential. This job involves the maintenance and upkeep of the building systems, AHUs/ Lighting/Power/UPS/HV/Generators/Cooling systems/BMS/Faultfinding etc. The HV ticket doesn't necessarily need to be in date. If you would like to be considered for this incredible job opportunity, apply now online or contact Tarik Bell-Ross on (phone number removed) / (url removed) RG Setsquare is acting as an Employment Agency in relation to this vacancy

The Shift Engineer forms part of the Technical team service provided under the contract. This Role falls part of the FM Operations based in BP Sunbury static based. Operating Hours will be a shift 0800 till 1830 spread over a shift pattern 4 days on 4 days off ,This will include call out. This role offers the opportunity to provide efficient and effective control of work services, supporting projects, operational activities, and small works across the BP portfolio. Primarily site-based, the position also includes the potential to provide local support to other BP site, central London location, based on skill set and operational requirements. Training and professional development will be a key part of the role and overall package, with a focus on further upskilling in areas such as Authorised Person (AP) responsibilities, isolations, and other key disciplines. Key objectives of the role: The role will provide support in the coordination, planning and monitoring of sub-contract works including monitoring, auditing, and enforcement of the Control of Work requirements. The role is responsible for the safe execution, agreed quality and timely completion of sub-contract work and to ensure that the Client & JLL requirements are adhered to at all times. Support with out of contracted hours works and manage contractors and own work load Accordingly in accordance and support from the Engineering Management Team. Ability to fault find LV / ELV control systems including monitoring and fault diagnostics on power quality. Isolation of Plant and management of System including Controls and pump sets. Will need to be IT literature as they will be required to work in real time on a tablet. Manage data collection and systems to pull information and make changes. To be able to install and maintain new plant and equipment when required, ensure that plant faults and defects are swiftly rectified. Ensure that suitable spares are available to carry out both maintenance and reactive works and to establish estimated timescales to carry out remedial works The individual should have good understanding of HVAC systems and fundamentals, including the ability to be able to operate the equipment at its full potential. This includes basic controls knowledge with the ability to diagnose and repair any non-gas related issues. Manage time on Projects to suite deadlines and complete assigned tasks as stipulated by Technical Services / Project managers. Will be expected to have acquired elements of other skills which enable them to work flexibly across trades React to breakdown maintenance requests within the required SLAs. Ability to self-perform maintenance tasks. Good understanding of an IT environment and Data systems Previous Thermographic understanding preferred but not essential Technical awareness of computer room/call centre/trader operations and experience of power, UPS, CPS, distribution, cooling etc. Understanding of modular UPS systems including full understanding and experience of functional switching and scheduled switching. Capability of producing switching programmes. Ability to maintain Dali lighting systems, including re-addressing and software changes (Software training to be provided) Experience working with building management systems including fault finding and operator use. Experience with VAV systems, FCU systems, passive and active chilled water circuits and chilled beams. Understanding of power generation, G59, auto changer systems. Or equivalent Experience and understanding of HVAC systems. Ability to test and diagnose power quality issues including harmonic distortion using onsite power analysers Able to apply a risk focused maintenance approach and operations of plant and systems in data centres/critical environments Provide emergency response OOH on site to manage the site BCP, Escalate urgent issues identified through to the Technical Services Manager. Respond to work interruptions, outages or emergencies consistent with the SLA. Responsibility for ensuring all critical related engineering maintenance documentation & records are kept updated and conform Industry Standards Ensure maintenance tasks are completed within agreed timescales. Liaise with Clients representatives with respect to maintenance & repair tasks. Advise the Facilities Management Team of changes in critical environment requirements Must be willing to work over & above contractual hours. Undertake site surveys & produce Works Requests, Method Statements & Risk Assessments for planned works. Undertake Upgrade & Install small works. Control and supervise contractors when required. To ensure all PPMs and Critical Facility PPMs are carried out to schedule and also ensure completion of all reactive Helpdesk Requests ensuring closing and completion in line with SLAs Ensure maintenance is carried out in line with JLL H&S procedures, using the permit to work system where applicable and action improvements identified during the building and workplace inspections and reviews Monitor and analyse environmental conditions, review the loading and working conditions of critical equipment regularly Fully understand the operational protocols associated with alarm conditions and auxiliary back-up system capabilities Complete an incident report for all abnormal incidents affecting systems availability (draft prepared within 24 business hours of an incident). Determine the root cause and action items required to restore availability and prevent a recurrence. Review and submit to the Engineering Manager ensuring all actions are documented reviewed and completed Entering relevant quotes and remedial works onto the in-house team to be managed correctly Maintain L8 compliance and onsite water treatment systems Continually communicate building issues to end users. Carryout fault finding on start-delta motors including VFDs and Soft Start controls / contactors Assist and enhance service delivery through best practice and the effective use of site systems and equipment. Understanding of a CDM/ Permit to work process with experience of working on previous electrical install projects. Working alongside the EMEA Control of Works and SAP Knowledge of domestic and commercial LTHW systems, pressure vessels buffer vessels and valve operation. Maintain pumps sumps and tanks including float values sensors KNOWLEDGE, SKILLS & QUALIFICATIONS REQUIRED Building Services Knowledge Minimum of 5 yrs experience with a Recognised Apprenticeship and Qualifications to undertake the role in higher Education L2 Minimum Mechanical/ Electrical / HVAC Knowledge Commercial or LV switching Knowledge Facility knowledge understand Hvac and systems. HSE Knowledge City & Guilds or equivalent in an Engineering, Electrician qualifications SMSTMS / IOSH / NEBOSH certification desirable Manager or supervisory experience of contractors for both remedial service and maintenance, Competent operator of Permit to Work systems Computer literate, familiar with MS Office Applications, including Microsoft Project and capable of becoming competent user of bespoke databases Experience of having worked in a similar role within a large diverse organisation and have a proven track record of success in delivering and monitoring EHS activities Ideally, experience of working in a continuous improvement culture. BMS Controls Experience / HVAC Experience Understanding not limited to PRVs , Pumps, Critical Environment Cooling Knowledge of emergency response/standby/call out activities and protocols Understand the monitoring of utilities and environmental programmes TPBN1_UKTJ

81375 - Quality Engineer Join Our Team as a Quality Engineer! Are you passionate about quality management and looking for an exciting opportunity to make a difference? We are seeking a talented Quality Engineer to join our team at UK Power Networks Services in the Heathrow/Central London Area office. About the Role: As a Quality Engineer, you will play a crucial role in ensuring compliance with ISO 9001: 2015 standards in our electrical infrastructure construction projects. You will provide expert quality management advice, conduct audits, and support project managers in maintaining high-quality standards. What We Offer: Competitive salary of £54,166, plus car and a 3% bonus. 25 days of annual leave plus bank holidays. Additional benefits including Reservist Leave, Personal Pension Plan, Tenancy Loan Deposit Scheme, and more. Tax-efficient benefits such as Cycle to Work, Home & Tech, and Green Car Leasing Schemes. Occupational Health support, discounted gym membership, and Employee Assistance Programme.Key Responsibilities: Provide quality management advice to ensure compliance with ISO 9001: 2015. Conduct quality management system audits and produce audit reports. Develop and implement quality management system inductions, training, and communication materials. Monitor compliance with client and project requirements, including conducting external audit.About You: HNC qualification in Quality Management, Construction, Project Management, or Technical/Engineering. Practitioner member of the Chartered Quality Institute with an aspiration to gain Chartered status. Experience in quality management systems within the construction industry. Trained QMS Auditor/Internal QMS Auditor with experience in auditing to ISO 9001: 2015. Excellent communication, presentation, planning, and decision-making skills. About Us: UK Power Networks Services is a national provider of power distribution and distributed energy solutions. We work in various sectors, including transport, defence, manufacturing, and industrial, and we are growing rapidly. Join us and be part of this exciting change. Close Date: 10/02/2026 Apply Now: If you are ready to take on this challenging and rewarding role, apply now visa our careers website and become a part of our dynamic team! For more information and to view the full job description please click apply! If you have any queries in connection to this vacancy or your application, please contact us at quoting the vacancy reference number and a member of the team will get in touch with you as soon as possible

The Shift Engineer forms part of the Technical team service provided under the contract. This Role falls part of the FM Operations based in BP Sunbury static based. Operating Hours will be a shift 0800 till 1830 spread over a shift pattern 4 days on 4 days off ,This will include call out. - DAYS ONLY SHIFT This role offers the opportunity to provide efficient and effective control of work services, supporting projects, operational activities, and small works across the BP portfolio. Primarily site-based, the position also includes the potential to provide local support to other BP site, central London location, based on skill set and operational requirements. Training and professional development will be a key part of the role and overall package, with a focus on further upskilling in areas such as Authorised Person (AP) responsibilities, isolations, and other key disciplines. Key objectives of the role: The role will provide support in the coordination, planning and monitoring of sub-contract works including monitoring, auditing, and enforcement of the Control of Work requirements. The role is responsible for the safe execution, agreed quality and timely completion of sub-contract work and to ensure that the Client & JLL requirements are adhered to at all times. Support with out of contracted hours works and manage contractors and own work load Accordingly in accordance and support from the Engineering Management Team. Ability to fault find LV / ELV control systems including monitoring and fault diagnostics on power quality. Isolation of Plant and management of System including Controls and pump sets. Will need to be IT literature as they will be required to work in real time on a tablet. Manage data collection and systems to pull information and make changes. To be able to install and maintain new plant and equipment when required, ensure that plant faults and defects are swiftly rectified. Ensure that suitable spares are available to carry out both maintenance and reactive works and to establish estimated timescales to carry out remedial works The individual should have good understanding of HVAC systems and fundamentals, including the ability to be able to operate the equipment at its full potential. This includes basic controls knowledge with the ability to diagnose and repair any non-gas related issues. Manage time on Projects to suite deadlines and complete assigned tasks as stipulated by Technical Services / Project managers. Will be expected to have acquired elements of other skills which enable them to work flexibly across trades React to breakdown maintenance requests within the required SLAs. Ability to self-perform maintenance tasks. Good understanding of an IT environment and Data systems Previous Thermographic understanding preferred but not essential Technical awareness of computer room/call centre/trader operations and experience of power, UPS, CPS, distribution, cooling etc. Understanding of modular UPS systems including full understanding and experience of functional switching and scheduled switching. Capability of producing switching programmes. Ability to maintain Dali lighting systems, including re-addressing and software changes (Software training to be provided) Experience working with building management systems including fault finding and operator use. Experience with VAV systems, FCU systems, passive and active chilled water circuits and chilled beams. Understanding of power generation, G59, auto changer systems. Or equivalent Experience and understanding of HVAC systems. Ability to test and diagnose power quality issues including harmonic distortion using onsite power analysers Able to apply a risk focused maintenance approach and operations of plant and systems in data centres/critical environments Provide emergency response OOH on site to manage the site BCP, Escalate urgent issues identified through to the Technical Services Manager. Respond to work interruptions, outages or emergencies consistent with the SLA. Responsibility for ensuring all critical related engineering maintenance documentation & records are kept updated and conform Industry Standards Ensure maintenance tasks are completed within agreed timescales. Liaise with Clients representatives with respect to maintenance & repair tasks. Advise the Facilities Management Team of changes in critical environment requirements Must be willing to work over & above contractual hours. Undertake site surveys & produce Works Requests, Method Statements & Risk Assessments for planned works. Undertake Upgrade & Install small works. Control and supervise contractors when required. To ensure all PPMs and Critical Facility PPMs are carried out to schedule and also ensure completion of all reactive Helpdesk Requests ensuring closing and completion in line with SLAs Ensure maintenance is carried out in line with JLL H&S procedures, using the permit to work system where applicable and action improvements identified during the building and workplace inspections and reviews Monitor and analyse environmental conditions, review the loading and working conditions of critical equipment regularly Fully understand the operational protocols associated with alarm conditions and auxiliary back-up system capabilities Complete an incident report for all abnormal incidents affecting systems availability (draft prepared within 24 business hours of an incident). Determine the root cause and action items required to restore availability and prevent a recurrence. Review and submit to the Engineering Manager ensuring all actions are documented reviewed and completed Entering relevant quotes and remedial works onto the in-house team to be managed correctly Maintain L8 compliance and onsite water treatment systems Continually communicate building issues to end users. Carryout fault finding on start-delta motors including VFDs and Soft Start controls / contactors Assist and enhance service delivery through best practice and the effective use of site systems and equipment. Understanding of a CDM/ Permit to work process with experience of working on previous electrical install projects. Working alongside the EMEA Control of Works and SAP Knowledge of domestic and commercial LTHW systems, pressure vessels buffer vessels and valve operation. Maintain pumps sumps and tanks including float values sensors KNOWLEDGE, SKILLS & QUALIFICATIONS REQUIRED Building Services Knowledge Minimum of 5 yrs experience with a Recognised Apprenticeship and Qualifications to undertake the role in higher Education L2 Minimum Mechanical/ Electrical / HVAC Knowledge Commercial or LV switching Knowledge Facility knowledge understand Hvac and systems. HSE Knowledge City & Guilds or equivalent in an Engineering, Electrician qualifications SMSTMS / IOSH / NEBOSH certification desirable Manager or supervisory experience of contractors for both remedial service and maintenance, Competent operator of Permit to Work systems Computer literate, familiar with MS Office Applications, including Microsoft Project and capable of becoming competent user of bespoke databases Experience of having worked in a similar role within a large diverse organisation and have a proven track record of success in delivering and monitoring EHS activities Ideally, experience of working in a continuous improvement culture. BMS Controls Experience / HVAC Experience Understanding not limited to PRVs , Pumps, Critical Environment Cooling Knowledge of emergency response/standby/call out activities and protocols Understand the monitoring of utilities and environmental programmes TPBN1_UKTJ

Electrical Design Engineer Location: Heathrow Airport, London Contract Role: 6 months + Day Rate: £350 to £425 per day Sector: Aviation / Rail / Pharma / Industrial Automation We are currently recruiting for a specialist electrical and mechanical engineering contractor delivering complex, safety-critical projects across aviation, rail, pharmaceutical, and industrial environments. With a strong presence at Heathrow Airport, The contractor is recognised for its high standards, technical excellence, and ability to deliver live-environment projects with minimal operational disruption. The Role We are seeking an experienced Electrical Design Engineer to support live project delivery at Heathrow Airport. This role requires a hands-on, site-experienced engineer who understands the realities of working in a highly regulated, operational environment. You will be responsible for producing, reviewing, and coordinating electrical designs while working closely with project managers, site teams, and clients to ensure safe, compliant, and buildable solutions. Key Responsibilities Develop electrical designs for live construction projects Support site teams with technical input and design coordination Design and review Low Voltage (LV) systems, including: Lighting Small power Ensure designs comply with BS7671, relevant standards, and Heathrow requirements Liaise with clients, consultants, and stakeholders in live operational environments Participate in site surveys, inspections, and commissioning support Assist with technical problem-solving during construction phases About You Minimum 10 years' experience in electrical engineering or design Strong site-based experience working on live projects Background in Aviation, Rail, Pharmaceutical, or Automation environments Solid experience with Low Voltage systems, lighting, and small power Qualified Electrician background is highly desirable Chartered Engineer status (CIBSE / IET) preferred but not essential Comfortable working in operational, safety-critical environments Strong communication skills with the ability to work collaboratively across teams What's on Offer Long-term contract opportunity working at Heathrow Airport Involvement in complex, high-profile infrastructure projects Competitive day rate Opportunity to work with a respected specialist contractor Apply Now If you are an experienced Electrical Design Engineer with strong site experience and a passion for delivering high-quality work in live environments, we would like to hear from you

Automatic Door Engineer – West London- £32,000 – £42,000 per annum Automatic Door Engineer Benefits: • Door-to-door travel paid, • Company van, phone, fuel card and credit card provided, • Power tools, test meters, full uniform and PPE supplied, • Private healthcare and pension, • Security vetting required due to site nature, • On-call rota: 1 in 5 Automatic Door Engineer Company Overview: Our client is a well-established UK engineering business renowned for delivering specialist systems across multiple sectors. Engineers work in a hands on, technical environment with cutting edge automated solutions, including access control, bespoke door systems, and advanced electrical infrastructure. With a strong focus on quality, innovation, and reliability, every project is tailored to client requirements and supported by dedicated in-house design and manufacturing teams. The business values its people, offering opportunities to develop technical expertise, work on varied projects, and make a real impact on client operations. Automatic Door Engineer Role Overview: This role supports a growing portfolio of commercial contracts, covering service, maintenance, installation, and fault-finding across a wide range of automatic and industrial door systems. • Work split: 60% automatic doors (swing and sliding), 40% shutters, sectional doors, high-speed doors, car park barriers, and access control systems, • Sites: Approximately 70% of the workload concentrated across three main locations, with the remaining 30% across other commercial sites (around 30 active contracts) Automatic Door Engineer Candidate Requirements: • Service, maintenance, installation and fault-finding experience, • You will need to be able to pass a vetting check, • Full UK driving licence or equivalent, • Working knowledge of BS EN 16005, • Experience with GEZE, Dormakaba, Record, and Sesamo systems, • Electrical background preferred but not essential Get Staff acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. Please note that if you have not been contacted within 7 days, your application for this position has been unsuccessful

Are you an experienced engineer looking for an exciting new challenge? Join a dynamic team, maintaining complex systems within the UK’s busiest airport. You’ll be part of a highly technical engineering team responsible for office spaces, simulators and hangars. Some of your main duties will involve: • HVAC Plant, • Cooling & Heating, • Electrical power and lighting systems, • LOTO, • Plumbing/ water systems, • General fabric works What’s On Offer: • Competitive Salary: Up to £44,000 per annum., • Shift Pattern: 4 days on, 4 days off (nights). 18:30 till 06:30., • Holiday: 20 Shift days annual leave., • Development: Potential AP training courses in future., • Pension: Pension scheme available. Ideal Candidate: • Proven experience as a qualified engineer within a critical environment., • Ability to work effectively in a team and independently when required., • Committed to maintaining the highest standards of safety and compliance. This is a fantastic opportunity for a motivated and skilled professional to advance their career within a leading facilities management company. If you're looking for a challenging role with excellent growth potential, apply now to join the team and take the next step in your career! Alternatively, please contact Michal at Invictus on (phone number removed)

The Shift Engineer forms part of the Technical team service provided under the contract. This Role falls part of the FM Operations based in BP Sunbury static based. Operating Hours will be a shift 0800 till 1830 spread over a shift pattern 4 days on 4 days off ,This will include call out. This role offers the opportunity to provide efficient and effective control of work services, supporting projects, operational activities, and small works across the BP portfolio. Primarily site-based, the position also includes the potential to provide local support to other BP site, central London location, based on skill set and operational requirements. Training and professional development will be a key part of the role and overall package, with a focus on further upskilling in areas such as Authorised Person (AP) responsibilities, isolations, and other key disciplines. Key objectives of the role: -The role will provide support in the coordination, planning and monitoring of sub-contract works including monitoring, auditing, and enforcement of the Control of Work requirements. -The role is responsible for the safe execution, agreed quality and timely completion of sub-contract work and to ensure that the Client & JLL requirements are adhered to at all times. -Support with out of contracted hours works and manage contractors and own work load -Accordingly in accordance and support from the Engineering Management Team. Ability to fault find LV / ELV control systems including monitoring and fault diagnostics on power quality. -Isolation of Plant and management of System including Controls and pump sets. -Will need to be IT literature as they will be required to work in real time on a tablet. -Manage data collection and systems to pull information and make changes. -To be able to install and maintain new plant and equipment when required, ensure that plant faults and defects are swiftly rectified. -Ensure that suitable spares are available to carry out both maintenance and reactive works and to establish estimated timescales to carry out remedial works -Will be expected to have acquired elements of other skills which enable them to work flexibly across trades -React to breakdown maintenance requests within the required SLA’s. -Ability to self-perform maintenance tasks. -Good understanding of an IT environment and Data systems -Previous Thermographic understanding preferred but not essential -Technical awareness of computer room/call centre/trader operations and experience of power, UPS, CPS, distribution, cooling etc. -Understanding of modular UPS systems including full understanding and experience of functional switching and scheduled switching. Capability of producing switching programmes. -Ability to maintain Dali lighting systems, including re-addressing and software changes (Software training to be provided) -Experience working with building management systems including fault finding and operator use. Experience with VAV systems, FCU systems, passive and active chilled water circuits and chilled beams. -Understanding of power generation, G59, auto changer systems. Or equivalent -Experience and understanding of HVAC systems. -Ability to test and diagnose power quality issues including harmonic distortion using onsite power analysers -Able to apply a risk focused maintenance approach and operations of plant and systems in data centres/critical environments -Provide emergency response OOH on site to manage the site BCP, Escalate urgent issues identified through to the Technical Services Manager. Respond to work interruptions, outages or emergencies consistent with the SLA. -Responsibility for ensuring all critical related engineering maintenance documentation & records are kept updated and conform Industry Standards -Ensure maintenance tasks are completed within agreed timescales. -Liaise with Clients representatives with respect to maintenance & repair tasks. -Advise the Facilities Management Team of changes in critical environment requirements -Must be willing to work over & above contractual hours. -Undertake site surveys & produce Works Requests, Method Statements & Risk Assessments for planned works. -Undertake Upgrade & Install small works. Control and supervise contractors when required. -To ensure all PPM’s and Critical Facility PPM’s are carried out to schedule and also ensure completion of all reactive Helpdesk Requests ensuring closing and completion in line with SLA’s -Ensure maintenance is carried out in line with JLL H&S procedures, using the permit to work system where applicable and action improvements identified during the building and workplace inspections and reviews -Monitor and analyse environmental conditions, review the loading and working conditions of critical equipment regularly -Fully understand the operational protocols associated with alarm conditions and auxiliary back-up system capabilities -Complete an incident report for all abnormal incidents affecting systems availability (draft prepared within 24 business hours of an incident). Determine the root cause and action items required to restore availability and prevent a recurrence. -Entering relevant quotes and remedial works onto the in-house team to be managed correctly -Maintain L8 compliance and onsite water treatment systems -Continually communicate building issues to end users. -Carryout fault finding on start-delta motors including VFD’s and Soft Start controls / contactors -Assist and enhance service delivery through best practice and the effective use of site systems and equipment. -Understanding of a CDM/ Permit to work process with experience of working on previous electrical install projects. Working alongside the EMEA Control of Works and SAP -Knowledge of domestic and commercial LTHW systems, pressure vessels buffer vessels and valve operation. -Maintain pumps sumps and tanks including float values sensors KNOWLEDGE, SKILLS & QUALIFICATIONS REQUIRED -Building Services Knowledge -Minimum of 5 yrs experience with a Recognised Apprenticeship and Qualifications to undertake the role in higher Education L2 Minimum -Mechanical/ Electrical / HVAC Knowledge -Commercial or LV switching Knowledge -Facility knowledge understand Hvac and systems. -HSE Knowledge -City & Guilds or equivalent in an Engineering, Electrician qualifications -SMSTMS / IOSH / NEBOSH certification desirable -Manager or supervisory experience of contractors for both remedial service and maintenance, -Competent operator of Permit to Work systems -Computer literate, familiar with MS Office Applications, including Microsoft Project and capable of becoming competent user of bespoke databases -Experience of having worked in a similar role within a large diverse organisation and have a proven track record of success in delivering and monitoring EHS activities -Ideally, experience of working in a continuous improvement culture. -BMS Controls Experience / HVAC Experience -Understanding not limited to PRVs , Pumps, -Critical Environment Cooling -Knowledge of emergency response/standby/call out activities and protocols -Understand the monitoring of utilities and environmental programmes

The Power Systems Engineer will perform day-to-day tasks that include conducting power system studies, analyzing and designing electrical systems, and supporting power generation projects. Proficiency in Power Systems and Power System Studies. HVDC TECH provides world-class consultancy services spec

Based Cumbria, Carlisle, NorthwestJob Title: Service Engineer Power Systems Package: To £45/50K Negot. Synopsis: My Client is seeking a Field Service Engineer from an Electrical / Electronic background responsible for Commissioning, Repair and Service on UPS systems.

Job Title: Consultant Engineer Electrical Engineering Location: Barrow-in-Furness, / Filton we offer a range of hybrid and flexible working arrangements please speak to your recruiter about the options for this particular role Salary: Competitive (Commensurate with skills and experience) What you

Senior Power Systems Engineer - This role has been created to assist in the continuing growth of our clients electrical power network design and consultancy services. Undertaking the design of the small power and lighting required for a substation. Producing Engineering and Design reports for each d

An engineering staffing agency in the UK is seeking a Power System Studies Engineer for a 12-month assignment in Leatherhead. The role involves supporting onshore project studies, including power generation and various electrical analyses. Candidates should have experience with ETAP software and pow

A leading technology firm in the UK is seeking Electrical Design Engineers for control system design, simulation, and testing.

A global engineering firm is seeking a Senior Electrical Design Engineer to work on HV/MV engineering design for energy infrastructure projects. Candidates should have a strong background in electrical engineering and relevant experience, with opportunities for career progression.

A leading engineering firm in the UK is seeking an Electrical Design Engineer to join their established team. This permanent office-based role focuses on LVAC systems and power distribution equipment.

This role involves providing engineering for power subsystems, ensuring integration from design to procurement. A leading aerospace technology firm is seeking a Power System Engineer to join their Avionics Team in the London Area. The ideal candidate will have over 5 years of experience in power ele

A leading engineering firm in the UK is looking for a Cable Systems Engineer to contribute to innovative projects in power transmission infrastructure. You'll design cable systems, conduct site surveys, and work within a supportive team environment that emphasizes growth, diversity, and inclusion. T

A consultancy specialized in Power Electronics is seeking a Power Systems Engineer for a full-time hybrid role in the West Midlands. The position involves conducting power system studies, analyzing electrical systems, and collaborating with diverse teams to support power generation projects. Candida

Candidates must possess a degree in Electrical or Power Systems Engineering and have at least 5 years of experience with PSCAD and DIgSILENT PowerFactory. A leading engineering consultancy in the UK is seeking a Power System Engineer for a remote role.

A leading provider of critical power systems in the United Kingdom is looking for an Electrical Design Engineer to design electrical packages for Gas projects, ensuring compliance with specifications and industry standards. Ideal candidates should have a degree in Electrical Engineering and 2–5 ye

A leading engineering firm in the UK seeks a Senior or Principal Electrical Engineer to execute project work and develop engineering deliverables.

You will work closely with R&D and Operational functions to support new product development by applying power systems modelling, signal processing, machine learning and analysis techniques to ensure new and existing products can be fully delivered. Hands‑on experience in power system modelling & d

Electrical, Electronics, Power Systems, Aerospace Engineering. Help plan and conduct validation and verification activities for power systems. At ALTEN, we empower talented engineers to innovate, solve complex challenges, and deliver impactful solutions that build tomorrow’s world—today.

A leading global energy company is looking for an experienced Electrical Engineer - Power Plant based in the UK. The successful candidate will manage third-party and joint venture agreements and conduct performance analyses of cogeneration systems. A Bachelor's Degree in electrical engineering and 1

The role involves providing design and engineering support for power and infrastructure projects. A leading global real estate services provider is seeking an Electrical Engineer in London.

The Power Systems Engineer will perform day-to-day tasks that include conducting power system studies, analyzing and designing electrical systems, and supporting power generation projects. Proficiency in Power Systems and Power System Studies. Strong background in Electrical Engineering and Electric

A leading engineering firm is seeking a Senior/Principal Power System Engineer in the UK to support activities across the power sector. Responsibilities include power system modelling, feasibility studies, and technical reporting. Ideal candidates have a degree in electrical engineering, professiona

In this role, you will be responsible for the maintenance and repairs of power systems, including installations and testing of equipment. A leading engineering recruitment firm is seeking a Field Service Engineer in the Liverpool City Region. Ideal candidates will have experience with switchgear and

Une entreprise de haute technologie au Royaume-Uni recherche un Ingénieur Mécanique pour rejoindre son équipe.Le candidat idéal possède un diplôme en ingénierie mécanique, automobile ou aéronautique, ainsi qu'une expérience prouvée en conception et en gestion de projets techniques.Ce rôl

A leading UK engineering company seeks a Lead Engineer – Electrical Systems to provide technical expertise across the lifecycle of Electrical Systems for their nuclear power project. Key responsibilities include managing contract partners, delivering quality outcomes, and mentoring junior engineer

A leading energy company is seeking a highly skilled Mechanical Design Engineer to join their engineering team in the Liverpool City Region. Candidates should have experience in mechanical or fabrication engineering, preferably in power generation. The position offers an exciting opportunity for tho

The role involves providing power subsystem engineering from design through to integration, including responsibilities in requirements analysis and stakeholder management. Candidates should hold a BSc/MSc and have over 5 years of experience in power systems for the space industry. A leading aerospac

A leading building services consultancy in the UK seeks an Assistant Electrical Engineer specializing in High Voltage systems. This role offers hands-on experience with HV electrical distribution, resilience systems, and opportunities for direct client interaction. Ideal candidates should have a deg

A leading engineering firm in the UK is seeking an experienced commissioning engineer to contribute to complex power supply and rail projects.

A leading renewable energy firm in London is hiring a Grid Connection Engineer to lead engineering activities across utility-scale solar and BESS projects. Candidates should have a degree in Electrical Engineering, strong knowledge of connection processes, and excellent communication skills. This ro

About the job Senior Power Systems Engineer. You will work closely with R&D and Operational functions to support new product development by applying power systems modelling, signal processing, machine learning and analysis techniques to ensure new and existing products can be fully delivered. Deep t

A Degree in Electrical Engineering with Power Systems specialisation. You will be leading and delivering a range of projects within the Power Systems team, bidding and winning work as well as supporting and training team members. The types of work delivered within the Power Systems team currently in

Grid Connection Engineer / Power Systems Engineer (Contract). Experience in grid connection or power systems engineering for utility‑scale solar, BESS, or other generation assets. Degree in Electrical Engineering or Power Systems (Chartered beneficial).

Ideal candidates will hold a degree in Electrical Engineering focused on Power Systems, possess experience in consulting, and be proactive in meeting client needs. A leading engineering and consulting firm in the UK seeks a Power Systems Consultant to lead projects and build client relationships. Th

A leading energy company based in Greater London is seeking a Power System & Product Development Engineer to lead the delivery of smart-grid digital tools and solutions. You will utilize your expertise in power system analysis and product development to directly influence how flexible connections op

Strong technical knowledge of spacecraft electrical power systems, including solar array design, battery technology, and power electronics. Satellite Electrical Power Systems Engineer. You will own the end-to-end power system architecture — from energy generation and storage to power conditioning