Validation engineer jobs in PlymouthCreate job alerts

Purpose of the Role: A major project at Thales working within the Maritime Autonomous & Remote Systems Team (MMCM) require a keen and motivated Engineer skilled in IVVQ (ITEA). The MMCM Project is a complex system-of-systems incorporating Platform, SONAR/Sensors, Command and Control (C2), payload deployment, autonomy and communications. An experienced IVVQ engineer is needed to deliver the subsystem IVVQ strategies and associated acceptance & test plans to ensure successful overall system-level IVVQ. You will operate across the subsystem teams and work closely with the engineering leads, including industrial partners external to Thales. On occasions there will also be a requirement to work with the Project team based in France (Brest), as well as supporting activities at offsite locations in the UK. For this role you MUST have or be able to obtain UK Security Clearances (SC). The role may involve some travel to our sister-sites in the UK and France and suppliers facilities. Principal Relationships: Internal • System Engineering Manager, • System IVVQ Manager, • Subsystem Engineering team (UK/Fr), • Systems Engineers, • Software Engineers, • Hardware Engineers, • IVVQ Engineers, • QA External • Industrial Partners, • Customer Community Key Responsibilities and Tasks: • You will be responsible to the USV IVVQ Lead for delivering the subsystem’s IVVQ strategy, plan and schedule through close-working with the Systems, Software and Hardware engineering teams., • You will be responsible for the production of all subsystem test documentation and conduct of associated test activities covering both the Hardware and Software entities within each subsystem., • You will be responsible for the collation and presentation of test Verification and Validation evidence, captured during test activities, to enable design sell off and/or Customer Acceptance of the entities to be delivered., • You will be expected to liaise and support the Systems, Software and Hardware teams in the conduct and resolution of investigations into outstanding issues prior to delivery., • You will be able to Integrate and test all hardware and software Sub-Systems as fitted to the Unmanned Surface Vessel., • You will be expected to liaise with the USV Systems Engineering Manager and the IVVQ Manager for the overarching system. To achieve this you will be proficient in fault diagnosing and rectification as required, as well as recording Defects for further action within the companies Fault Recording and Analysis tools. Key performance Indicators against Responsibilities and Tasks • Time – Ensure tasks are completed efficiently within agreed timescales as determined by the IVVQ Manager. Timesheets are to be submitted weekly and hours booked for the week are reported to the line manger to assist in the monitoring of the teams finances in accordance with the Work Package Agreement (WPA) obligations., • Cost – Ensure tasks are completed to agreed budgets as laid down within the teams WPA., • Quality – All activities are documented before a task is completed and where appropriate Problem Reports are raised and significant issues reported to the Line manager., • Safety - Ensure you have read and understand the specific Risk Assessments available within each working environment. Skills Essential • Demonstrable experience in the production of detailed Integration, Test and Acceptance strategies & plans for complex systems (system of systems), • Knowledge of System engineering lifecycles, • Solid understanding / knowledge of the IVVQ/ITEA process, • A logical, methodical and thorough manner, having an eye for detail and a wiliness to investigate and document findings., • Excellent communication and interpersonal skills with the ability to communicate technical issues to team members, Design Authorities and varying levels of senior management., • Ability to work under pressure, either independently (where appropriate) or under supervision of the designated lead engineer., • Experience in the generation of test documentation (specifically writing specification and test reports), • Knowledge of electrical / electronic engineering., • Knowledge of electro-mechanical systems., • Proficient in Microsoft Office Suite for producing, modifying or reviewing technical documents, reports, plans and spread sheets., • Basic planning Desirable • Knowledge of Autonomous and/or Remotely operated platforms/systems, • Knowledge of Command Control, Communications and Computer Information systems (C4IS)., • Basic knowledge of SONAR., • Knowledge of Installation, Testing and Commissioning of SONAR and/or C4IS systems (Ideal), • Experience of working to (or writing) technical requirements, • Knowledge of Software engineering, • Knowledge of RF comms, • Knowledge of IT networking, • Knowledge of marine platforms (electro-mechanical), • Knowledge of a process for Software release and configuration control, • Experience of working in Naval Dockyards., • A working knowledge of the DOORS requirements management tool and its application to IVVQ, • Experience of estimating IVVQ activities Values & Behaviours: • Focus on Customers., • Committed to meeting deadlines, • Be open and honest with a high degree of integrity, • Flexible disposition (with regard to working patterns), • Work well within a team., • Be innovative and strive for continued process improvement. Financial / Budgetary Responsibility: • You will be responsible for reporting and working within specified budgets and timescales as directed by the System Engineering Manager. Desirable Qualifications and Certification: Required • Technical Degree/HNC/D or equivalent, • Two years or greater experience in a test background, • Full UK Driving License., • UK Security Clearances (SC) or able to achieve Desirable • Maritime and Coastguard Medical Certification

Role - Commissioning Engineer Location - Plymouth ( Hybrid ) My client is seeking a hands-on Commissioning Engineer with strong technical expertise to support delivery across complex engineering projects within a high-spec, cleanroom-based manufacturing environment. This role is ideally suited to someone with a solid commissioning background who is looking to develop into a managerial position over time. The focus is on practical system commissioning, integration, and technical problem-solving, ensuring systems are fully tested, optimised, and ready for handover in a controlled production setting. You will play a key role in the final stages of project delivery, working closely with engineering teams, contractors, and stakeholders to ensure seamless system start-up and transition to operations. Key Responsibilities • Carry out and support hands-on commissioning activities across HVAC systems, cleanroom environments, utilities, and process systems, • Execute commissioning plans, including system testing, fault finding, and optimisation, • Support system integration and performance testing to ensure operational readiness, • Act as a technical problem solver, identifying and resolving issues during commissioning and start-up phases, • Work closely with multidisciplinary teams including engineering, automation, construction, and validation, • Assist in the development and completion of commissioning documentation (procedures, test scripts, reports), • Support the transition of systems from construction through to commissioning and final handover, • Contribute to coordination of commissioning activities and timelines, with exposure to project delivery responsibilities, • Interface with automation and control systems (BMS, PLC, SCADA) during commissioning activities, • Ensure adherence to health, safety, and quality standards, particularly within regulated or controlled environments Requirements • Proven experience in a Commissioning Engineer / C&I / HVAC commissioning role within cleanroom or controlled environments, • Strong hands-on commissioning capability ideally someone who understands how to commission systems end-to-end, • Experience working within pharmaceutical or similar regulated environments (clean air tech, life sciences, or equivalent preferred), • Knowledge of HVAC systems, cleanrooms, and utilities (e.g. black utilities, process gases), • Exposure to automation systems (BMS, PLC, SCADA) is advantageous, • Experience contributing to commissioning documentation and technical reporting, • Strong technical problem-solving ability during system start-up and integration, • Motivated to develop into a leadership/managerial role over time, • Excellent communication and team collaboration skills Looking forward to hearing back from you!

Elevations Design & Projects division are seeking a skilled and innovative Design Engineer to join a key client of ours engineering team in Plymouth. This role is responsible for designing, developing, and supporting the production of new and existing products, while ensuring technical excellence and alignment with industry standards. The successful candidate will play a pivotal role throughout the product lifecycle, from concept through to production support. Design Engineer Key Responsibilities * Lead the design and development of new products, guiding projects from initial specification through to production release. * Collaborate with cross-functional teams and stakeholders to deliver high-quality design outcomes. * Maintain and update 3D models and engineering drawings; ensure correct version control and document management. * Design and procure jigs, fixtures, and production tooling; provide comprehensive production engineering support. * Prepare and manage technical documentation including design specs, proposals, risk assessments, test plans, and manuals. * Perform mechanical analysis and validation of designs to ensure compliance with standards and regulations. * Support production operations by troubleshooting design-related issues and driving continuous improvement initiatives. * Provide technical support to sales and marketing teams, including product presentations and field demonstrations. * Liaise with customers, suppliers, and partner companies as needed to support engineering activities. * Assist in cost estimation, project planning, and tracking budget variance. * Contribute to departmental process improvements using PDCA and other continuous improvement methodologies. * Ensure all work is performed in line with company procedures and quality standards. Design Engineer Qualifications & Experience * Degree in Mechanical Engineering or a related field (BEng or equivalent). * Prior experience in the railway or another regulated industry is advantageous. Key Skills & Competencies * Proficient in 3D CAD modelling and drafting (Solid Edge / Teamcenter preferred; training can be provided). * Strong design and problem-solving skills with a practical, hands-on approach. * Excellent communication skills—able to produce and present clear technical documentation and lead design reviews. * Collaborative mindset with the ability to build effective relationships across departments and with external partners. * Sound understanding of mechanical engineering principles, including best practices such as peer reviews. * Competency in mechanical analysis and customer-facing technical documentation. * Familiarity with PDCA and other continuous improvement tools. * Knowledge of welded fabrication and cast component design is highly desirable. * Experience with composite materials and/or electrical principles is a plus.

TQR are working exclusively with a global Manufacturer based at their Plymouth site to recruit an experienced Process Engineer at their Plymouth site. As a key member of the Engineering function, the successful candidate will support safe, reliable, and efficient operation of the sites moulding and extrusion processes and associated equipment. The role combines technical problem solving with process optimisation, driving quality, repeatability, and productivity through robust process control, standardisation, and technical support. You will Work closely with Production, Maintenance, and Quality, and will lead technical initiatives that enhance first-time yield, reduce cycle time, minimise scrap by strengthening mould performance, improve process capability (CP/CPk) and advancing machine-setting practices. Key Responsibilities: Develop, document, and optimise moulding process parameters to achieve consistent quality and performance. Lead troubleshooting of process-related issues on moulding machines, tooling and auxiliary equipment, ensuring rapid root-cause identification and sustainable corrective actions. Support the introduction, commissioning, and validation of new moulds and tooling, ensuring correct set-up, safe handover, and adherence to the tooling commissioning process. Champion the use of scientific moulding techniques and data-driven decision making to enhance process robustness. Collaborate with Maintenance and the CI Lead to drive TPM activities focused on process capability and equipment uptime. Implement and support SMED activities to reduce changeover times and increase flexibility. Support the development and maintenance of process documentation (SOPs, setup sheets, validation reports). Provide technical training and coaching to setters and operators to build process understanding and ownership. Participate in trials, automation integration and continuous improvement projects that enhance quality, throughput, or cost efficiency. Support engineering change management and ensure process alignment with Quality and Validation standards. Promote a culture of right-first-time performance, teamwork, and continuous improvement. Essential Experience & Candidate Attributes Required: A minimum of a HNC (or equivalent) in a relevant engineering discipline. In the absence of this qualification a time served Process / Manufacturing Engineer may also be considered. Proven experience in moulding or extrusion process engineering (rubber, silicone, or plastic moulding environment). Strong understanding of moulding principles, tooling design, and machine control systems. Hands-on experience with process optimisation, validation, and troubleshooting techniques. Knowledge of TPM, SMED, Lean/CI principles and Six Sigma. Data-driven approach to problem-solving, comfortable using SPC, capability studies, and DOE where applicable. Effective communicator and team player, able to influence across departments and work collaboratively with production and maintenance teams. Methodical, safety-conscious, and resilient under pressure. This is a day shift position working Monday to Thursday 08:30 to 17:00 and Fridays 08:30 to 14:30. Please note, out client does not hold a skilled worker visa sponsorship licence, therefore it is essential that candidates must have the immediate right to work in the UK. If you are an experienced Process Engineer from a moulding background and are looking for a new challenge, please submit an up to date CV by using the apply button below. By applying for this position, you confirm that you consent to the processing of your personal data in accordance with the General Data Protection Regulation (GDPR) for the purposes of recruitment, employment and working finding service. TPBN1_UKTJ

TQR are working exclusively with a global Manufacturer based at their Plymouth site to recruit an experienced Process Engineer at their Plymouth site. As a key member of the Engineering function, the successful candidate will support safe, reliable, and efficient operation of the site’s moulding and extrusion processes and associated equipment. The role combines technical problem solving with process optimisation, driving quality, repeatability, and productivity through robust process control, standardisation, and technical support. You will Work closely with Production, Maintenance, and Quality, and will lead technical initiatives that enhance first-time yield, reduce cycle time, minimise scrap by strengthening mould performance, improve process capability (CP/CPk) and advancing machine-setting practices. Key Responsibilities: • Develop, document, and optimise moulding process parameters to achieve consistent quality and performance., • Lead troubleshooting of process-related issues on moulding machines, tooling and auxiliary equipment, ensuring rapid root-cause identification and sustainable corrective actions., • Support the introduction, commissioning, and validation of new moulds and tooling, ensuring correct set-up, safe handover, and adherence to the tooling commissioning process., • Champion the use of scientific moulding techniques and data-driven decision making to enhance process robustness., • Collaborate with Maintenance and the CI Lead to drive TPM activities focused on process capability and equipment uptime., • Implement and support SMED activities to reduce changeover times and increase flexibility., • Support the development and maintenance of process documentation (SOPs, setup sheets, validation reports)., • Provide technical training and coaching to setters and operators to build process understanding and ownership., • Participate in trials, automation integration and continuous improvement projects that enhance quality, throughput, or cost efficiency., • Support engineering change management and ensure process alignment with Quality and Validation standards., • Promote a culture of right-first-time performance, teamwork, and continuous improvement. Essential Experience & Candidate Attributes Required: • A minimum of a HNC (or equivalent) in a relevant engineering discipline. In the absence of this qualification a time served Process / Manufacturing Engineer may also be considered., • Proven experience in moulding or extrusion process engineering (rubber, silicone, or plastic moulding environment)., • Strong understanding of moulding principles, tooling design, and machine control systems., • Hands-on experience with process optimisation, validation, and troubleshooting techniques., • Knowledge of TPM, SMED, Lean/CI principles and Six Sigma., • Data-driven approach to problem-solving, comfortable using SPC, capability studies, and DOE where applicable., • Effective communicator and team player, able to influence across departments and work collaboratively with production and maintenance teams., • Methodical, safety-conscious, and resilient under pressure. This is a day shift position working Monday to Thursday 08:30 to 17:00 and Friday’s 08:30 to 14:30. Please note, out client does not hold a skilled worker visa sponsorship licence, therefore it is essential that candidates must have the immediate right to work in the UK. If you are an experienced Process Engineer from a moulding background and are looking for a new challenge, please submit an up to date CV by using the ‘apply’ button below. By applying for this position, you confirm that you consent to the processing of your personal data in accordance with the General Data Protection Regulation (GDPR) for the purposes of recruitment, employment and working finding service

Building a sustainable tomorrow KierBAM are a Joint Venture (JV) partnership between Kier and BAM Nuttall. We are currently delivering the redevelopment of an area within a Royal Navy dockyard located in Plymouth and we are seeking an experienced BIM Manager who will be a self-starter possessing the drive and knowledge to promote Digital Construction Technologies across the project and take full responsibility for leading the BIM team. Location: Plymouth - 4 days a week as minimum Contract: Permanent Due to the site being within a high Security Naval base, additional security checks will need to be satisfied for this role, with BPSS level security clearance being a requirement, which can take up to 8 weeks to process. Only candidates holding EU, NATO, 5 Eyes, or MISWG member passports and have been a UK resident for the last 5 years can be considered for this role. Making Possible As BIM Manager, you will be responsible for the following: Being able to collaborate and work effectively within a multidiscipline and diverse team, possessing strong communication and interpersonal skills. Able to pick up and drive the BIM narrative in new directions and exploring new ways to bring savings to the Project team. Work alongside the Project Information Manager to produce, manage and control the project BIM brief, programme, and deliverables. Lead and manage Model coordination and validation across the project team and sub-contractors. Proficient in a wide range of model authoring and checking software, including but not limited to Revit, AutoCAD, Solibri, ProjectWise, Synchro. Experience in site data capture systems, site delivery systems and access control (Datascope) would be an advantage. Extensive knowledge of managing task teams within a complex project. Prior experience within a MOD or secure environment a benefit, understanding the function of SALs and NDAs to inform information handling, processing and transmitting. Experienced in implementing ISO19650 parts 1-5. Demonstrable excellence in supporting the delivery of design, construction & commissioning of Major Projects and infrastructure. What do you bring to the role? Monitor the completion of BIM Gateway forms throughout the project lifecycle management (PLM) to fulfil assurance procedures relating to early assessment of design team capability and internal resource considerations. Assist the digital and wider project teams to get the most out of the key design and authoring software used and smooth the way for delivery into federated models. Work with multiple stakeholders to manage and mitigate design risk through the use of federation tools for clash reviews. Seek out and promote the use of technologies that can improve business outcomes. Take a lean approach to identifying project solutions. Authorise the information model for sharing. Identify, develop and provide training in aspects of digital construction and information management practices both to individual BIM team and project team members and to the wider project supply chain. Manage and review the work produced by the digital production team/members (Specialists and Modellers). Support the design teams to develop accurate 3D designs in accordance and compliance with project/client standards. Manage the development of the project information aligned with the contract requirements and BEP. Understand and identify, hardware and software requirements on the project and communicate your findings effectively with the Project Information Manager. Ensure that all parties are using the CDE in the agreed upon manner and as described in the BEP. Capture best practices, workflows, lessons learned and communicate this information within the organization and to team members. Support the high safety and environmental standards expected on a project of this nature in accordance with company and project specific policies and report any inadequacies through the project channels. Whats in it for you? Competitive salary A wide range of family-friendly policies 8 % matched pension contributions Private healthcare Life assurance 26 days holiday 2 wellbeing days 1 volunteering day Personal and professional development BAM Infrastructure is also committed to equality of opportunity in all its employment practices, and to developing policies that support work-life balance. About BAM Building a sustainable tomorrow. Thats our mission and our promise at BAM. Its how we engineer vital infrastructure and construct high-quality buildings as one of the largest construction companies in Europe. We strive to create an environment where everybody feels welcome and valued. Were on an exciting journey to employ the best talent to join us regardless of social background, race, colour, religion, national or ethnic origin, sexual orientation, gender identity or expression, age, disability or other characteristics. The application process BAM is committed to ensuring a fully inclusive recruitment and onboarding process, so if at anytime you feel you may need any reasonable adjustments, do not hesitate to speak with one of our team, and we will do our best to support you. TPBN1_UKTJ

We are looking for an Engineer to support the development and testing of R&D Prototype stage electromechanical products. The position is hands on, completing product validation and verification tests which include specifying and designing appropriate test procedures, building and setting up test equ

As a Thermatic Technical Service/Validation Engineer you will be responsible for delivering critical ventilation validation and Verifications to HTM 03-01 and other relevant British Standards. Ventilation Service/Validation Engineer. We are looking for a Ventilation Service/Validation Engineer to jo

Expleo are recruiting for a Connected Car Validation Engineer to support our global automotive client, based in Bedfordshire, in their vision to deliver the most distinct and innovative range of road vehicles, all equipped with state-of-the-art technology, for a contract opportunity. Responsibilitie

Understanding of cGMP Clean Rooms, cGMP related utilities maintenance, cGMP equipment engineering & maintenance, Validation, and warehousing for cGMP related materials /product storage. Do you have validation engineering experience working in a GMP Life Science or Healthcare environment? Do you have

Junior Engineer – ValidationLocation: CranfieldPay Rate: £23. Overview We are seeking a motivated Junior Engineer to join a dynamic automotive xsrmqjs validation team specialising in connec.

Be the key interface for overall system validation and alignment on test plans Work with Engineering to improve validation tests and to define criteria for entry into Validation phase. The Rewards and Benefits on Offer: Immediate start available Competitive salary and benefits package Collaborative

Experience contributing to or developing V&V strategies, plans, exit criteria, verification activities or evidence review* Experience developing or improving engineering methods, tools, processes or capability at a departmental level* Strong communication and interpersonal skills, able to influence

A leading technology firm in the United Kingdom is seeking a Senior System Validation Engineer focused on high-speed SerDes technologies. Strong experience in system validation, knowledge of automation tools, and proficiency in programming languages like Python, C#, and C++ are essential.

Senior Verification and Validation (V&V) Engineers play a key role in Rolls‑Royce SMR’s Systems Engineering approach by leading the process of verifying that the power station design meets its requirements. Senior Engineer – Verification & Validation Delivery. This spans not only nuclear engin

Degree, HND, HNC or equivalent experience in Systems Engineering, Software Engineering, Control Systems Engineering or similar field. Principal Systems Verification & Validation Engineer. Principal Verification & Validation Engineer.

A leading chemistry company in the UK is seeking a Composite Mechanical Test Engineer to implement and maintain ISO certifications and conduct mechanical testing of composite materials. The ideal candidate should have a degree in Mechanical Engineering or Materials Science and relevant hands-on expe

A global leader in satellite communications is seeking a talented Senior System Validation Engineer based in the UK. Ideal candidates will have a MSc or BSc in Electrical Engineering, strong experience in system validation, and proficiency in testing and automation programming languages like Python

A consulting firm is seeking an experienced Salesforce QA to lead testing efforts for automation and manual tests.This role involves validating data accuracy, creating test plans, and collaborating closely with product teams to ensure high-quality deliverables.The ideal candidate must have over 10 y

A leading recruitment agency is seeking a Property Engineer to manage vehicle design and functional validation projects. An engineering degree is required for this position.

Candidates should have over 2 years of experience in software engineering or related fields, a Bachelor's degree in Software Engineering or a similar area, and proficiency in languages like Python and Java. Mercor is seeking a Software Engineering Professional for a freelance position focused on val

Do you have validation engineering experience working in a GMP Life Science or Healthcare environment? Do you have expertise in clean rooms and biocontainment? Are you looking for an exciting and unique challenge with a rapidly growing business?. Due to growth, they are now recruiting a Validation E

Recursion is seeking a Data Platform Engineer to join its London office.

A leading recruitment firm is seeking a highly skilled Senior Validation Engineer in England.

A leading engineering consultancy is seeking a Mechanical Validation Engineer to join their team in Greater London. You will assist Senior Engineers with HVAC commissioning and validation activities while also developing key technical and health & safety skills.

Senior System Validation Engineer – SerDes Focus. We are seeking a Senior System Validation Engineer with a strong emphasis on. Build and maintain test setups supporting both automated regression and manual validation.

A leading clean energy engineering firm in Hailsham is seeking a Senior Test Engineer to take ownership of complex test and validation activities.

A leading defence technology company in Greater London is seeking a Principal Systems Verification & Validation Engineer. The successful candidate will have over 5 years of relevant experience and will supervise engineers while engaging in multi-disciplined project environments.

A leading utilities engineering firm is seeking a PowerOn Reliance SCADA Engineer for a critical role in Wokingham. The role emphasizes strong hands-on expertise in GE PowerOn Reliance SCADA systems, focusing on testing, configuration, and validation across complex operational environments. Responsi

A leading technology company in the UK is seeking a Senior Validation Engineer to validate high-speed converters and contribute to the next generation of satellite communications. The ideal candidate will have a solid educational background in engineering, with experience in testing telecommunicatio

A leading automotive company is seeking a Measurement Engineer to capture real-world data for future products.

Typically a degree in an engineering discipline or equivalent experience along with being a Chartered Engineer status or working towards it. This work spans not only nuclear engineering but also the broader range of engineering and operational disciplines required to deliver a major infrastructure p

A forward-thinking engineering company in Gaydon is seeking a CFD Engineer to conduct thermal CFD analysis and collaborate with cross-functional teams.

Senior System Validation Engineer. Lead system validation activities across PHY, hardware, and software. MSc or BSc in Electrical Engineering.

Degree, HND, HNC or equivalent experience in Systems Engineering, Software Engineering, Control Systems Engineering or similar field. Applying IVVTQA principles and supporting systems engineering activities across requirements, design, integration, Verification & Validation and acceptance stages. Si

Una empresa internacional de consultoría tecnológica busca un ingeniero de validación para unirse a su equipo en Londres.El candidato ideal debe tener conocimientos sólidos de protocolo CAN y experiencia en el sector de automoción, principalmente en pruebas con ECUs.Se valorará la experiencia

To make an application for the Validation Engineer role or require further information, please contact:. Expleo are recruiting for a Validation Engineer to support our global automotive client, based in Bedfordshire, in their vision to deliver the most distinct and innovative range of road vehicles,

This position focuses on reliability and validation testing to support engineering projects. WhiteCrow Research is seeking a Senior Reliability & Testing Engineer in Mexico City. Candidates should have 3–6 years of experience in testing or engineering project support, a solid understanding of test

A leading defence contractor seeks a Principal Systems Verification & Validation Engineer in Greater London to lead the planning and execution of V&V activities. The ideal candidate will have over 5 years experience in relevant engineering disciplines and the ability to supervise teams.

A clean air services company in Greater London is seeking an experienced LEV / Validation Engineer.

A global automotive consultancy is seeking a Validation Engineer to support a major client in Bedfordshire. This role involves performing end-to-end vehicle validation, ensuring test resources are available, and tracking incident management tickets. Ideal candidates will have experience in connected

A leading utility provider in East Midlands seeks a Principal Engineer to enhance wastewater network performance. The role focuses on hydraulic modelling and risk validation, ensuring compliance with industry standards.

A global technology leader in the Greater Bristol Area is seeking a highly skilled SoC Functional Validation Engineer. This role involves functional validation and bring-up of next-generation SoC platforms featuring advanced ARM processors and interfaces. Applicants should have strong Embedded C ski

A fast-growing technology firm in the UK seeks an AI QA Engineer to support test development and maintain automated test suites.

A leading data provider in the United Kingdom is seeking a Python Developer to own and enhance an internal Python library and data validation system. The role involves close collaboration with data scientists and devops engineers in a rapidly growing business that tracks numerous global companies.

We are seeking a Senior Validation Engineer with a strong focus on converter validation. Reporting to the Chip Validation Team Leader, the Senior Validation Engineer will:. Build test automation for chip and system validation using Python.

A leading technology manufacturer in Cambridge is seeking a Senior Verification & Validation Engineer to own product-level testing and validation for innovative safety-critical electronic products. Responsibilities include developing test strategies, executing verification and validation activities,