Trabajos validation engineer en LeicesterCrear alertas

Become part of a winning team at our UK Centre of Excellence and a Government strategic facility. As the successful candidate, you will be responsible for delivering an automation installation of high quality for project testing through the requirement capture, design, installation, commissioning, test programme delivery and service support. Identify and propose improvements in processes, tools, and system solutions, rolling out improvements when agreed with leadership team. The role is a full time, on-site role and will require both hands on and office based activities ensuring the delivery of solutions that are safe, cost effective and on time. This role involves work for customers who manage critical infrastructure; based on customer requirements it will be necessary to carry out background checks and suitability assessments (e.g. UK Security Clearance (SC)) as part of the hiring process. This position requires the successful candidate to work onsite throughout the week (expectations: 5 days per week). Roles and Responsibilities: The Automation Engineer will be responsible for every part of the project delivery lifecycle including: • Requirement capture and detailed design of the automation system, ensuring it is maintainable, extensible, reliable, efficient and consistent with company standards., • Integration of the software and hardware components into one application., • Verification / validation of the system complete with hardware including with the power system under test., • Liaise with the other teams and disciplines within the company and customers and suppliers at all levels to facilitate the design and produce requirements and other system documents., • Provide maintenance, fault finding, diagnosis, repair, and upgrades / development as required., • Perform factory acceptance testing and commissioning work to the company's quality procedures., • Participate in Design reviews., • Assist in other areas of the business as required. Qualifications / Requirements: • Degree in engineering, computer science, or related field., • This role involves work for customers who manage critical infrastructure; based on customer requirements it will be necessary to carry out background checks and suitability assessments.This is a sole UK National and holds, or is eligible to obtain, to secure "UK EYE's Only" security clearance., • This position requires the successful candidate to work onsite throughout the week (expectations: 5 days per week). Desired Characteristics The Automation Engineer should have the following skills or experience: • Advanced and demonstrated years of experience of implementing automation systems., • Experience in PLC programming, HMI creation and SCADA configuration., • Proficient in a variety of industrial communication protocols (e.g. Modbus, Profinet, EtherCAT, OPC-UA)., • Familiar with industrial networks and their implementation., • Knowledge of data acquisition systems (DAS) configuration and operation., • Solid understanding of computer programming and software development., • Hands-on hardware troubleshooting and software debugging experience., • Knowledge of electrical circuit operation / design. Knowledge of the following would be advantageous: • Data storage, IT systems., • Power Systems., • Test & Instrumentation., • Data processing and analysis., • Instrument / sensor selection., • Control systems., • Industrial cyber Security, (IEC 62443, Perdue model)., • Substation networking (61850, PRP)., • NI LABView Personal Qualities: • Advanced analytical and problem solving skills., • Good verbal, written communication, and presentation skills., • Excellent attention to detail., • Exceptional organisational skills and experience with project management., • Capable of working as part of a multi-disciplined team., • Ability to prioritise and multi-task on a variety of projects to agreed time scales. About us: GE Vernova’s Power Conversion & Storage business provides electrification systems that are critical to customers’ power and energy needs for their high performance applications. We work with some of the world’s major energy, maritime and industrial organizations, helping to enable a transition to energy efficiency and decarbonization, including through our specialist motors, power electronics systems, electrical drives and control technologies that evolve today’s industrial processes for a cleaner, more productive future. We serve specialized sectors such as energy, marine, industry and all related services. GE’s Power Conversion business, part of GE Vernova, provides electrification systems that are critical to customers’ power and energy needs for their high-performance applications. We work with some of the world’s major energy, maritime and industrial organizations, helping to enable a transition to energy efficiency and decarbonization, including through our specialist motors, drives and control technologies. Our engineers dedicated to Naval get involved in solving exciting challenges through leading the development and delivery of the engineering aspects of our projects. Projects that range from designing, de-risking and delivery of new power / propulsion and energy system solutions alongside digital & automation technologies to our UK and international customers both to surface and submarine systems. Research and development are key to what we do, and you will have the opportunity to influence and play a critical role in the successful execution of programs for future surface ships, submarines and future technology programs along with the growth of a unique world class facility, its optimised operations and the development of new capabilities Relocation Assistance Provided: No

Description Methods is recruiting for a permanent Mid/Senior Data Engineer to join the Data and AI Capability Centre. This role will be mainly remote but require flexibility to travel to client sites, and our offices based in London, Sheffield, and Bristol. You will support complex client engagements where data engineering is used to stabilise business-critical processes, improve reporting confidence and establish repeatable data foundations across enterprise systems. Bringing strong hands-on experience in data profiling, cleansing, mapping, reconciliation and integration across complex business systems, ideally with exposure to procurement, workforce, finance, ERP or source-to-pay data. You should be comfortable working iteratively with architects, process owners and business stakeholders to identify root causes, support tactical fixes, improve reporting confidence, and help establish repeatable data foundations for future transformation. Working on client data foundation engagements that combine discovery, stabilisation and remediation. Typical work will include understanding process and system landscapes, identifying data and reconciliation issues, supporting tactical fixes, and helping clients define the data architecture, reporting and governance foundations needed for longer-term transformation. • Design, build and improve ETL and ELT pipelines that support data ingestion, profiling, reconciliation, cleansing and reporting across enterprise source systems., • Building data catalogues, data flows, interface views and trusted source views, • Design and architect modern data solutions that align with business objectives and technical requirements, supporting current-state and target-state data architecture, • Help clients improve confidence in operational, workforce, procurement and financial reporting through timely, accurate and reconcilable data., • Build highly scalable and performant data solutions leveraging cloud platforms and open-source software, • Develop data models to handle enterprise-level analytical needs, • Optimise large-scale data processing systems for performance and cost-efficiency, • Implement robust data quality frameworks and monitoring solutions, • Evaluate new technologies to enhance our data engineering capabilities, • Collaborate with stakeholders to translate business requirements into technical specifications, • Present technical solutions to leadership and non-technical stakeholders, • Contribute to the development of the Methods Analytics Engineering Practice by participating in our internal community of practice, • Enable business leaders to make informed decisions with confidence through timely, accurate data insights, • Establish reusable engineering standards, patterns and documentation that support quality, maintainability and repeatable Data Foundations delivery across future engagements., • Drive adoption of modern data architectures and platforms, • Deliver seamless data solutions that enhance user experience, • Elevate the technical capabilities of the entire data engineering team, • Help cultivate a data-driven culture within the organisation, • Establish technical standards and patterns that ensure quality and maintainability Requirements • Experience working with data from Ariba, Workday, SAP S/4HANA or comparable procurement, workforce, timesheet, finance, supplier invoice or locally maintained spreadsheet sources., • Hands-on experience profiling data quality issues, defining cleansing rules, mapping data between systems, validating reconciliation outputs and documenting exceptions for business review., • Ability to work iteratively with architects, process owners, finance, procurement, workforce and operational stakeholders to turn ambiguous business issues into clear data analysis, engineering actions and controlled tactical fixes., • Understanding of data ownership, stewardship, lineage, metadata, controls and data quality monitoring, with the ability to produce documentation that can be reused as part of an enduring data governance model., • Experience implementing and advocating for test-driven development methodologies in data pipeline workflows, including unit testing, integration testing, and data quality validation frameworks, • Proven experience leading technical aspects of data projects, • Strong data architecture and modelling skills with the ability to design scalable data solutions, • Deep understanding of data warehouse design principles and methodologies, • Advanced knowledge of optimisation techniques for large-scale data processing, • Strong proficiency in SQL and Python for handling complex data problems, • Hands-on experience with Apache Spark (PySpark or Spark SQL), • Experience with the Azure data stack, • Knowledge of workflow orchestration tools like Azure Data Factory or Apache Airflow, • Experience with containerisation technologies like Docker, • Proficiency in dimensional modelling techniques, • Experience with CI/CD pipelines for data solutions, • Strong communication skills for translating complex technical concepts, • Experience designing and implementing data mesh or data fabric architectures, • Knowledge of cost optimisation strategies for cloud data platforms, • Experience with data quality frameworks and implementation, • Experience with data visualisation tools like Power BI or Apache Superset, • Experience with other cloud data platforms like AWS, GCP or Oracle, • Experience with modern unified data platforms like Databricks or Microsoft Fabric, • Experience with Kubernetes for container orchestration, • Understanding of streaming technologies (Apache Kafka, event-based architectures), • Experience with high-performance, large-scale data systems UKSV (United Kingdom Security Vetting) clearance is required for this role, with Security Check (SC) as the minimum standard, either already held or with a willingness to undergo the process. Some roles/projects may require Developed Vetting (DV) clearance; while not mandatory, a willingness to obtain DV clearance would be beneficial. As part of the onboarding process candidates will be asked to complete a Baseline Personnel Security Standard (BPSS); details of the evidence required to apply may be found on the government website _. If you are unable to meet this and any associated criteria, then your employment may be delayed, or rejected. Details of this will be discussed with you at interview. Benefits Methods is passionate about its people; we want our colleagues to develop the things they are good at and enjoy. By joining us you can expect • Autonomy to develop and grow your skills and experience, • Be part of exciting project work that is making a difference in society, • Strong, inspiring and thought-provoking leadership, • A supportive and collaborative environment Development – access to LinkedIn Learning, a management development programme, and training Wellness – 24/7 confidential employee assistance programme Flexible Working – including home working and part time Social – office parties, breakfast Tuesdays, monthly pizza Thursdays, Thirsty Thursdays, and commitment to charitable causes Time Off – 25 days of annual leave a year, plus bank holidays, with the option to buy extra days each year Volunteering – 2 paid days per year to volunteer in our local communities or within a charity organisation Pension – Salary Exchange Scheme with 4% employer contribution and 5% employee contribution Discretionary Company Bonus – based on company and individual performance Life Assurance – of 4 times base salary Private Medical Insurance – which is non-contributory (spouse and dependants included) Worldwide Travel Insurance – which is non-contributory (spouse and dependants included) Enhanced Maternity and Paternity Pay Travel – season ticket loan, cycle to work scheme

Select how often (in days) to receive an alert: We are seeking a proactive and detail-oriented R&D Test Engineer to join our Research & Development team. The core purpose of this role is to plan, execute, and continuously improve testing on R&D instruments and sub-systems, ensuring performance is understood, evidenced, and communicated clearly back to the engineering teams. You will work hands-on with development instruments, collaborating closely with R&D Engineers and R&D Technicians to diagnose issues, propose practical solutions, and drive learning through structured experimentation. The ideal candidate is confident running tests independently, rigorous in data capture, and comfortable translating results into actionable feedback for design and systems teams. • Plan and execute test activities on R&D instruments, modules, and assemblies, including functional, performance, reliability/life, and verification testing. Plan timing and feeding back into project planning., • Author, maintain, and follow test procedures (test methods, setups, acceptance criteria, and reporting formats) to ensure repeatable, auditable results., • Build and validate test setups (fixtures, rigs, software tools, instrumentation) and ensure test equipment is suitable and controlled (e.g., calibration status where applicable)., • Record, analyse, and interpret data using appropriate methods (spreadsheets, structured logs, basic statistics/plots), ensuring traceability from test objective → evidence → conclusion., • Communicate findings clearly through test reports, presentations, and engineering updates, highlighting pass/fail status, trends, risks, and recommended next actions., • Problem-solve alongside R&D technicians and engineers: triage failures, isolate root causes (or most-likely causes), run investigative experiments, and feed learning back into design changes or process updates., • Support coordination of test schedules with instrument availability, build activities, and engineering priorities to meet project deadlines; escalat blockers and propose practical workarounds., • Drive continuous improvement in test efficiency, robustness, and knowledge capture (templates, checklists, standard setups, lessons learned)., • Promote safe working and good laboratory practice, ensuring risk awareness and adherence to relevant internal policies and procedures., • Demonstrated ability to write clear test procedures and execute them with discipline and repeatability., • Strong attention to detail with a structured approach to data capture, version control of results, and reporting., • Practical problem-solving mindset: able to break down ambiguous technical issues into testable hypotheses and next steps., • Confident communicator — able to present results to engineering audiences and translate technical outcomes into decisions/recommendations., • Comfortable working hands-on with precision assemblies and instruments in a dynamic R&D environment, balancing pace with rigour., • Degree/HND (or equivalent experience) in Mechanical Engineering, Electrical/Electronic Engineering, Mechatronics, Physics, or a related discipline., • Experience in test engineering / validation / verification of complex equipment (instruments, automation, precision mechanisms, measurement systems, or similar)., • Experience producing test reports and communicating outcomes to stakeholders., • Experience in precision engineering, metrology, optics, lasers, interferometers, motion systems, or ultra-high-accuracy instrumentation environments., • Familiarity with structured problem-solving tools (e.g., 5-Why, Ishikawa, basic FMEA concepts) and good experimental practice (DOE-lite thinking)., • Basic experience with CAD software, preferably Solidworks and PDM systems like Solidworks Manage/Windchill or similar., • Basic knowledge of fiber handling and DFB laser systems., • Ability to create small utilities/macros/scripts for test automation or data processing (e.g., Excel automation, Python, LabVIEW, MATLAB) — depending on what you use internally., • Test planning and execution – ability to run structured tests on complex systems, • Understanding of mechanical and/or electrical systems, • Use of test equipment and instrumentation (setup, operation, validation), • Reading and interpreting technical documentation (drawings, schematics, work instructions), • Data collection and analysis (capturing results clearly and consistently), • Basic understanding of system performance and validation principles, • Familiarity with calibration and measurement practices (where applicable to metrology), • Mechanical / Electrical assembly (desirable) Established in 1886, Taylor Hobson is the world leader in surface and form metrology and developed the firstRoundnessandSurface Finishmeasuring instruments. We providecontactandnon-contact measurement solutionsfor the most demanding applications on a global basis, with a worldwide infrastructure to support our clients; we are a truly global ultra-precision metrology company. We are pioneers, continually developing ourproductsto meet the ever-increasing demands of next generation technologies, particularly inOptics, Bearings, Space, Defence, Aerospace, Automotive, Medical and Renewable Energytechnologies. Taylor Hobson is part of the Ultra Precision Technologies Division ofAMETEK, Inc. which is a leading global manufacturer of electronic instruments and electromechanical devices. Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. AMETEK, Inc. is a leading global provider of industrial technology solutions servinga diverse set of attractive niche markets with annual sales over $7.5billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers’ most complex challenges. We employ 22,000 colleagues, in 35countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual,Inclusion, Teamwork, and Social Responsibility. AMETEKisa component of the S&P 500. Visit careers for more information. #J-18808-Ljbffr

Embedded Software Test Engineer page is loaded## Embedded Software Test Engineerremote type: Onsitelocations: Leicester, UKtime type: Full timeposted on: Posted Todayjob requisition id: JR100781Druck is a global leader in high‑precision pressure sensing technology. Our products operate in safety‑critical environments across aerospace, industrial, and energy sectors. We pride ourselves on delivering high‑integrity, high‑reliability solutions for customers around the world.We are now expanding our aerospace software capability and are seeking an Embedded Software Test Engineer to support the verification and validation of safety‑critical embedded software developed to DO‑178C Level A.Role OverviewIn this role, you will be a key contributor to the software verification and validation lifecycle, ensuring our embedded systems meet the highest aerospace safety and quality standards. You will work closely with software, and hardware engineers to design, execute, and document verification activities in line with regulatory and customer requirements.Key ResponsibilitiesSoftware Verification Activities Develop and execute test plans, test procedures, and test cases to support DO‑178C qualification. Ensure all tests provide clear traceability to high‑ and low‑level requirements. Perform unit, integration, hardware‑in‑the‑loop (HIL), and system‑level testing of embedded software. Conduct debugging, problem investigation, and defect reporting, working closely with the software development team.* Produce clear and accurate test reports, evidence packages, and certification documentation.Compliance & Quality Perform verification activities aligned with DO‑178C, DO‑330, and the company quality management system (AS9100). Participate in reviews of requirements, architecture, and code to assess testability and completeness.* Support structural coverage activities (including MC/DC) where required.Technical Contribution Interpret hardware datasheets, microcontroller documentation, and interface specifications to develop robust and realistic test scenarios. Work with embedded toolchains, debuggers, simulators, and automated test environments as needed.* Contribute to the continuous improvement of test processes, tools, and templates.Required Skills & ExperienceEssential Proven experience in software verification and validation in an aerospace or safety‑critical environment. Hands‑on experience applying DO‑178B/C practices, ideally to Level‑A. Strong understanding of embedded systems and experience testing microcontroller‑based software and low‑level communication protocols. Ability to understand and assess C source code for testability (coding not required, but comprehension is). Ability to interpret hardware documentation and interface specifications. Must hold a British passport or have the right to work in the UK.Desirable Experience with structural coverage (e.g., MC/DC using Parasoft ideally, but LDRA, VectorCAST, Cantata, etc. is also acceptable). Familiarity with requirements and configuration management tools (e.g., DOORS, GitHub). Experience with HIL/PIL test setups. Knowledge of tool qualification under DO‑330.What You’ll Gain Opportunity to work on cutting‑edge aerospace technology. Growth in DO‑178C expertise and exposure to high‑integrity engineering practices. A collaborative team environment with experienced engineers. Competitive salary and comprehensive benefits.Join UsIf you’re passionate about embedded systems, software testing, and high‑integrity engineering, we invite you to apply and grow your career with a globally respected engineering organisation. #J-18808-Ljbffr

We areseeking an R&D Assoc Process Engineer to lead process deployment projects across Europe Foods. This role will support key priorities, including: • Scoping, installation and commissioning of new non-centreline equipment, and defining and executing product validation plans to ensure successful commercialisation., • Process and equipment risk assessments to evaluate capability against target product designs., • Make vs. buy process mapping to build and maintain a comprehensive understanding of process technologies, equipment assets and manufacturing capabilities across the region., • Capacity boost projects., • Deployment of technologies under the PepsiCo Positive (Pep+) Decarbonisation Agenda. The role spans multiple brands across both Snacks and Grains categories and involves working with a broad range of manufacturing process technologies. • Lead process and equipment risk assessments to evaluate the capability of new technologies to deliver target product designs and support investment decisions., • Drive the development, testing, qualification, and commercialization of process systems and equipment using internal and external resources., • Lead pilot plant and manufacturing scale-up trials, including data collection, analysis, and timely communication of results, conclusions, and recommendations., • Partner with Food Safety and Quality teams to ensure process systems consistently deliver safe, high-quality, and stable products., • Design and execute Design of Experiments (DOE) to screen, model, validate, and optimise pilot and commercial process performance while ensuring statistical robustness., • Develop and maintain a Europe Foods process knowledge map, capturing equipment, process capabilities, site assets, technology platforms, and manufacturing expertise., • Identify capability, knowledge, or system gaps and recommend corrective actions, including process improvements, coaching, training, and capability-building initiatives., • Contribute to continuous improvement workstreams that enhance business processes, increase efficiency, strengthen knowledge sharing, and support team development through coaching and best-practice implementation., • Collaborate effectively across R&D, Supply Chain, Engineering, MOS, Quality, Food Safety, Procurement, and external partners to deliver business objectives., • BSc, MSc, or PhD in Chemical Engineering, Mechanical Engineering, Food Engineering, Food Science, or a related discipline., • Minimum of 3-4 years' experience in process engineering or product/process development within the Food & Beverage industry. Other relevant backgrounds or experience will be considered., • Strong analytical skills with the ability to interpret complex data, apply statistical methods, and translate findings into actionable recommendations., • Demonstrated experience developing, scaling, and commercialising new products, processes, or equipment in cross-functional environments., • Proven ability to influence stakeholders, manage competing priorities, and perform effectively in fast-paced and dynamic environments., • Experience working within a Technical Stage-Gate development framework is preferred., • Ability and willingness to travel across Europe and internationally (approximately 25-30%). #J-18808-Ljbffr

• Leicester, • Electronic Design Location: Leicester (Hybrid – 4 days onsite) Salary: Up to £70,000 + Benefits We are looking for an experienced Senior Electronic Design Engineer to join a growing engineering team in Leicester. You will be responsible for the design, development, testing and delivery of embedded electronic products, taking projects from initial specification and concept through to validation, certification and production. Working closely with hardware and software engineers, you will contribute to technically challenging product development projects and have the opportunity to work directly with customers and support projects through the full engineering lifecycle. • Design and develop electronic hardware from initial specification through to production., • Produce schematics and PCB designs for mixed-signal electronic systems., • Design and develop analogue and digital circuits, including power supplies, signal conditioning and sensor interfaces., • Work with embedded platforms including microcontrollers, processors, sensors and communication interfaces., • Prototype, test, debug and validate electronic hardware using laboratory equipment., • Support PCB design, bring-up, hardware verification and product qualification., • Consider EMC, DFM and DFT throughout the design process., • Support compliance and environmental testing where required., • Produce technical documentation including design specifications, test procedures and validation reports., • Work closely with embedded software engineers and other technical disciplines., • Communicate technical solutions and project updates with customers and internal stakeholders., • Provide technical guidance and mentoring to less experienced engineers where required., • Degree in Electronics Engineering, Electrical Engineering, Computer Engineering or a similar discipline., • 5+ years' commercial experience in electronic hardware/product design., • Strong understanding of analogue and digital electronics and mixed-signal design., • Proven experience designing electronic hardware from concept through to production., • Strong experience with schematic capture and multi-layer PCB design., • Experience with PCB design tools such as Altium Designer; experience with other industry-standard tools will also be considered., • Hands-on experience with prototype build, hardware bring-up, testing and debugging., • Experience working with MCUs/MPUs, sensors, communication interfaces and embedded systems., • Understanding of EMC, DFM, DFT and product compliance., • Experience working with engineering standards, qualification or compliance testing would be advantageous., • Strong problem-solving skills and the ability to investigate complex hardware issues., • Good communication skills, with the ability to work collaboratively across engineering teams and with customers. #J-18808-Ljbffr

We're looking for a Graduate Commissioning Engineer to joinour Infrastructure team working on projects across Leicestershire. You will be assisting our water team on projects for Severn Trent,Within this role you can enjoy 26 days annual leave, 24/7 Wellbeing Support Programme, and even more benefits/ Locations:Leicestershire Starting Salary: £31,000 per annum Pathway:Permanent, Full-time 2-year programme, leading to assistant level role upon completion with salary potential of CIRCA £38k Starting date:September 2027 We are unable to offer certificates of sponsorship to any candidates in this role. As a Graduate Commissioning Engineer, you'll be an essential part of our engineering team, helping to shape the future of construction across the UK.You'llhave the chance to work in a variety of teams, either on-site where the action happens or in a design-based role, depending on where your interests lie. • Assist in planning, preparing, and executing commissioning activities across various projects., • Support system testing, calibration, and validation according to commissioning plans and procedures., • Review technical documentation, drawings, and specifications to understand system design and performance requirements., • Record and report commissioning data, test results, and system performance outcomes., • Work closely with project engineers, design teams, and contractors to resolve technical issues., • Practical experience: gain valuable hands-on experience in your field., • Skill improvement: develop technical and professional skills., • Networking:build professional relationships and expand your network., • Career insight: gain insights into your chosen industry and potential career paths. We're looking for people due to graduate in 2027, or have recently graduated within the past three years, with a degree in Electrical Engineering or a related field. • A related Degree in electrical Engineering, • You'reexcited about starting a career in construction engineering, • You'reorganized, withgreat timemanagement skills, • You enjoy solving problems and have strong analytical abilities., • Full UK drivers' licence. Making Kier a diverse and inclusive place to work is a high priority for us. We're proud of the steps we've taken so far, but we know we must always do more. Our employees are key in shaping Kier's diversity and inclusion initiatives, and our people have made a huge impact on how we work, by using their experiences to shape our policies.You can see our D&I action plan here. It is important to note that in certain recruitment situations we reserve the right to close adverts early. • October 2026: Initial applications, • November 2026: Application reviews, • January 2027 onwards: In-person assessment centers #J-18808-Ljbffr

The Full Stack Quality Engineer will support the comprehensive testing and assurance of key applications undergoing significant refactoring and migration. You will work directly with client teams and within a large IBM programme to ensure end-to-end validation throughout the migration lifecycle. This includes defining the test approach, producing high-quality test artefacts, building full-stack automation frameworks, and executing tests across UI, API, services, microservices, data, and integration layers. In this senior role, you will design scalable automation solutions, integrate automated tests into CI/CD pipelines, and collaborate with architects, developers, DevOps teams, and stakeholders. You will provide expert guidance on quality engineering practices within a complex, multi-supplier environment and support functional testers by delivering reusable automation assets that accelerate testing efficiency. Responsibilities: • Define test approaches and quality strategies for large application refactoring and migration initiatives, • Build and maintain full-stack automation frameworks covering UI, API, services, microservices, containers, and integrations, • Create test artefacts including test plans, test scenarios, test scripts, and test data models, • Automate end-to-end test execution and integrate tests into CI/CD pipelines for continuous quality checks, • Develop reusable automation assets to support functional and regression testing, • Execute manual and automated tests to validate application behaviour during migration, • Collaborate with developers, architects, and DevOps teams to troubleshoot issues and ensure product readiness, • Analyse defects, perform root cause analysis, and drive continuous quality improvement, • Work effectively within a multi-supplier environment, managing dependencies across teams, • Provide technical leadership, mentoring, and quality guidance within the programme This role is subject to pre-employment screening in line with the UK Government's Baseline Personnel Security Standard (BPSS). An additional range of Personal Security Controls referred to as National Security Vetting (NVS) may apply, this could include meeting the eligibility requirements for The Security Check (SC) or Developed Vetting (DV). • Experience testing systems migrating to AWS, • Experience working in multi-supplier or large enterprise delivery environments, • Experience testing integration points or integration-focused solutions, • Exposure to large-scale refactoring or transformation programmes, • Experience mentoring or supporting other engineers Strong experience designing and implementing automation across UI, API, services, and integration layers • Proficiency in programming languages such as Java, JavaScript/TypeScript, Python,, • or C#, • Hands-on experience with automation tools (Selenium, Playwright, Cypress, RestAssured, Appium, etc.), • Strong understanding of microservices, containers, and distributed architectures, • CI/CD pipeline expertise (GitHub, GitLab, Jenkins, Azure DevOps, etc.), • Knowledge of test modelling, scenario design, and scalable automation patterns, • Strong analytical, debugging, and communication skills, • Proven ability to work confidently with cross-functional teams IBM is committed to creating a diverse environment and is proud to be an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, gender identity or expression, sexual orientation, national origin, caste, genetics, pregnancy, disability, neurodivergence, age, veteran status, or other characteristics. IBM is also committed to compliance with all fair employment practices regarding citizenship and immigration status. At IBM Consulting UK FutureNow, you'll build a career at the forefront of hybrid cloud and AI, working with leading clients across the public and private sectors. You'll collaborate with top industry professionals, gain hands on experience with cutting edge technologies, and deliver solutions that create real business impact. From day one, you'll work on meaningful, high profile programmes that stretch your skills and accelerate your growth. We invest heavily in you--supporting continuous learning, in demand skills development, and long term career progression. You'll thrive in a flexible, inclusive environment that values curiosity, encourages reinvention, and recognises what makes you unique. • Tools and policies to support your work-life balance from flexible working approaches, sabbatical programs, paid paternity leave, maternity leave and an innovative maternity returners scheme, • More traditional benefits, such as 25 days holiday (in addition to public holidays), private medical, dental & optical cover, online shopping discounts, an Employee Assistance Program, life assurance and a group pension plan through salary sacrifice. #J-18808-Ljbffr

A global leader in high-precision technology is looking for an Embedded Software Test Engineer in Leicester. This role requires expertise in software verification and validation for safety-critical environments. You will develop and execute test plans in compliance with DO-178C, ensuring the software meets high aerospace safety standards. Ideal candidates have a strong understanding of embedded systems and experience with related verification tools. Join a collaborative team environment with competitive salary and benefits. #J-18808-Ljbffr

A highly respected engineering and technology business is seeking a Senior Mechanical Engineer to join its Custom Projects Team. This is not a traditional product maintenance or incremental design role. Instead, you'll work on customer-driven engineering projects, developing bespoke solutions and modifications to sophisticated precision instruments for some of the world's most technically demanding applications. Every project is different. Every challenge is unique. We're looking for an engineer who enjoys taking ownership of a problem, developing a creative solution, and delivering it right first time. You’ll be responsible for transforming customer requirements into practical, high-performance engineering solutions, typically delivering projects within development cycles of six months. Working closely with customers, commercial teams, manufacturing, and R&D colleagues, you’ll take projects from concept through design, validation, manufacture, and implementation. Success in this role comes from balancing creativity, engineering rigour, and commercial urgency. • Designing bespoke mechanical solutions to meet specific customer requirements., • Taking ownership of projects from concept through to implementation., • Creating innovative design concepts and evaluating multiple technical approaches., • Performing engineering calculations, tolerance analysis, and FEA where required., • Working closely with manufacturing teams to ensure designs can be delivered efficiently., • Supporting testing, validation, and product introduction activities., • Collaborating with customers to fully understand application requirements and performance expectations., • A Mechanical Engineering degree or equivalent experience., • A proven track record in mechanical product development., • Experience designing precision mechanisms or engineered assemblies., • Strong 3D CAD capability., • Knowledge of manufacturing methods, materials, and assembly processes., • Excellent practical problem-solving skills., • The ability to balance innovation with delivering solutions within demanding timescales., • Enjoys solving customer-specific engineering challenges., • Thinks creatively when standard solutions won’t work., • Has a strong "right first time" mentality., • Takes ownership rather than waiting for direction., • Likes seeing concepts become reality quickly., • Enjoys working at the interface of R&D, manufacturing, and customers., • Motivated by technical achievement rather than people management., • Highly varied project work with no two projects the same., • Opportunity to work on world-class precision engineering products., • Significant technical autonomy and ownership., • Fast-moving development environment where good ideas become reality., • Work on genuinely challenging engineering problems for global customers., • Clear progression opportunities for ambitious engineers. This opportunity would suit an experienced Mechanical Design Engineer, Senior Mechanical Engineer, Product Development Engineer, R&D Engineer, Precision Engineer, or Innovation Engineer looking for a role where creativity, technical excellence, and customer-focused problem solving are valued equally. #J-18808-Ljbffr

Systems Engineer - AerospaceApplyremote type: Onsitelocations: Leicester, UKtime type: Full timeposted on: Posted Todayjob requisition id: JR100776Are you a people person with dynamic customer service orientation, adept at multitasking? Are you a Systems Engineer looking for an interesting and inspiring opportunity?Be part of a successful team! Druck delivers world-class expertise, excellence, and reliability in the toughest environments. Druck’s piezo-resistive pressure sensors, pressure transducers, pressure test and calibration instruments provide our companies high performance, stability, quality, accuracy, and quick response – in any environment.Make a difference to our business You will join the Aerospace Engineering Team, which consists of a multi-disciplinary team of Engineers including Mechanical, Electronic and System engineers. The team develops products to support a growing the Aerospace business through both Custom Product Opportunities (CPO) and New Product Introductions (NPI). The team designs and tests innovative pressure sensors supporting projects from cradle to grave, working closely with all other functions, such as sourcing, advanced manufacturing and quality, as well as with our production facilities.As a Systems Engineer - Aerospace, you will be responsible for: Generating Internal & External product/system documentation. Managing configuration of system/product documentation, documentation standards and procedures. Managing requirements of multiple system/product programs from inception to destruction. Working closely with support functions such a quality, supply chain, supplier base etc. Being Point of Contact for documentation exchange between customers and suppliers. Developing and advancing internal documentation processes, procedures and standards.Fuel your passion To be successful in this role you will: Be Degree or equivalent qualified in an Engineering discipline, preferably in Aerospace, Electrical or Mechanical subjects. Have significant Aerospace Systems development background. Have the ability to interpret Aerospace specifications, standards and drawings. Have knowledge of sector quality management processes such as AS9100, GRESS, APQP. Have knowledge of environmental test requirements such as DO160 & Mil Std 810. Have good knowledge of system verification and validation techniques. Be comfortable working in an environment with high expectations for quality, on-time delivery, and deadlines. Demonstrate excellent communication skills with customers and team members.* Have excellent attention to detail.Work in a way that works for you We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. In this role, we can offer the following flexible working patterns:* Flexibility within the day or week to get the job doneWorking with us Our people are at the heart of what we do. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.Working for you Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect: Contemporary work-life balance policies and wellbeing activities Comprehensive private medical care options Safety net of life insurance and disability programs Tailored financial programs* Additional elected or voluntary benefits### About Crane: DruckThe addition of the Druck brand to our Crane Aerospace & Electronics segement meaningfully strengthens our pressure sensing capabilities across critical applications—including environmental control systems, hydraulics, and engine monitoring. Additionally, Druck expands our presence into ground-based test and calibration equipment, further extending our technological capabilities and market reach. Druck is headquartered in Leicester, England, with significant operations around the world, including facilities in China, France, Hungary, and India. #J-18808-Ljbffr

At IBM Consulting UK FutureNow, you’ll build a career at the forefront of hybrid cloud and AI, working with leading clients across the public and private sectors. You’ll collaborate with top industry professionals, gain hands on experience with cutting edge technologies, and deliver solutions that create real business impact. From day one, you’ll work on meaningful, high profile programmes that stretch your skills and accelerate your growth. We invest heavily in you—supporting continuous learning, in demand skills development, and long term career progression. You’ll thrive in a flexible, inclusive environment that values curiosity, encourages reinvention, and recognises what makes you unique. We offer: • Tools and policies to support your work-life balance from flexible working approaches, sabbatical programs, paid paternity leave, maternity leave and an innovative maternity returners scheme, • More traditional benefits, such as 25 days holiday (in addition to public holidays), private medical, dental & optical cover, online shopping discounts, an Employee Assistance Program, life assurance and a group pension plan through salary sacrifice. We are looking for a Senior Automation Test Engineer to join IBM, supporting our public sector and defence clients. In this role, you will help deliver reliable and efficient automated testing solutions for a range of applications. You will design and develop automated test scripts, support CI/CD integration, and collaborate closely with developers and DevOps teams to enhance product quality and accelerate delivery. You will work with modern automation tools and programming languages to build automated UI, API, and integration tests. If you enjoy solving problems, reducing manual effort through automation, and improving delivery pipelines, we would be interested in hearing from you. • Design, develop, and maintain automated test suites for functional, regression, integration, performance, and API testing., • Build automation frameworks using industry‑standard tools and modern programming languages., • Develop optimized and efficient test scenarios aligned to acceptance criteria, ensuring strong test coverage., • Automate test environment setup, test execution, test data management, and environment validation., • Integrate automated tests into CI/CD pipelines and work with DevOps to support continuous testing., • Contribute to quality engineering practices within Agile, DevOps, and container‑based delivery models., • Monitor automated test execution, troubleshoot issues, and provide clear insights to development teams., • Collaborate with cross‑functional teams to improve product quality, identify risks, and promote automation best practices., • Participate in requirement analysis, sprint planning, and backlog refinement to embed quality from the outset., • Encourage and support adoption of automation tools, frameworks, and best practices across teams., • Ensure Best Practices are followed across SCRUM teams, including Test Estimation, Test Coverage, Test Traceability, Defect Management, Test Evidencing, and Test Closure., • Experience of programming and automation tools such as Java, Python, REST assured, Selenium Grid, Serenity Jenkins, Maven and Postman and be able to understand design to define comprehensive test scenarios., • Ability to maintain detailed documentation of the test framework, tests, test outcomes and defects., • Experience of developing and maintaining automation frameworks for API integration and UI based products, and designing, creating and maintaining automated test scripts., • Deep understanding of software testing principles and experience in an event-driven architecture, with strong analytical skills and the ability to think strategically about test automation., • Strong communication, collaboration, and problem‑solving abilities., • ISTQB Test Automation Engineer, • ISTQB Advanced Level Test Automation Engineer, • Certified Selenium Tester Foundation, • iSQI Certified Agile Tester (CAT) with automation focus, • CP‑SAT (Certified Professional - Selenium Automation Testing), • CSTE (Certified Software Test Engineer), • CAST (Certified Associate in Software Testing) IBM is committed to creating a diverse environment and is proud to be an equal‑opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, gender identity or expression, sexual orientation, national origin, caste, genetics, pregnancy, disability, neurodivergence, age, veteran status, or other characteristics. IBM is also committed to compliance with all fair employment practices regarding citizenship and immigration status. #J-18808-Ljbffr

We are seeking a proactive and detail-oriented R&D Test Engineer to join our Research & Development team. The core purpose of this role is to plan, execute, and continuously improve testing on R&D instruments and sub-systems, ensuring performance is understood, evidenced, and communicated clearly back to the engineering teams. You will work hands-on with development instruments, collaborating closely with R&D Engineers and R&D Technicians to diagnose issues, propose practical solutions, and drive learning through structured experimentation. The ideal candidate is confident running tests independently, rigorous in data capture, and comfortable translating results into actionable feedback for design and systems teams. • Plan and execute test activities on R&D instruments, modules, and assemblies, including functional, performance, reliability/life, and verification testing. Plan timing and feeding back into project planning., • Author, maintain, and follow test procedures (test methods, setups, acceptance criteria, and reporting formats) to ensure repeatable, auditable results., • Build and validate test setups (fixtures, rigs, software tools, instrumentation) and ensure test equipment is suitable and controlled (e.g., calibration status where applicable)., • Record, analyse, and interpret data using appropriate methods (spreadsheets, structured logs, basic statistics/plots), ensuring traceability from test objective → evidence → conclusion., • Communicate findings clearly through test reports, presentations, and engineering updates, highlighting pass/fail status, trends, risks, and recommended next actions., • Problem-solve alongside R&D technicians and engineers: triage failures, isolate root causes (or most-likely causes), run investigative experiments, and feed learning back into design changes or process updates., • Support coordination of test schedules with instrument availability, build activities, and engineering priorities to meet project deadlines; elevate blockers and propose practical workarounds., • Drive continuous improvement in test efficiency, robustness, and knowledge capture (templates, checklists, standard setups, lessons learned)., • Promote safe working and good laboratory practice, ensuring risk awareness and adherence to relevant internal policies and procedures., • Demonstrated ability to write clear test procedures and execute them with discipline and repeatability., • Strong attention to detail with a structured approach to data capture, version control of results, and reporting., • Practical problem-solving mindset: able to break down ambiguous technical issues into testable hypotheses and next steps., • Confident communicator — able to present results to engineering audiences and translate technical outcomes into decisions/recommendations., • Comfortable working hands-on with precision assemblies and instruments in a dynamic R&D environment, balancing pace with rigour., • Degree/HND (or equivalent experience) in Mechanical Engineering, Electrical/Electronic Engineering, Mechatronics, Physics, or a related discipline., • Experience in test engineering / validation / verification of complex equipment (instruments, automation, precision mechanisms, measurement systems, or similar)., • Experience producing test reports and communicating outcomes to stakeholders., • Experience in precision engineering, metrology, optics, lasers, interferometers, motion systems, or ultra-high-accuracy instrumentation environments., • Familiarity with structured problem-solving tools (e.g., 5-Why, Ishikawa, basic FMEA concepts) and good experimental practice (DOE-lite thinking)., • Basic experience with CAD software, preferably Solidworks and PDM systems like Solidworks Manage/Windchill or similar., • Basic knowledge of fiber handling and DFB laser systems., • Ability to create small utilities/macros/scripts for test automation or data processing (e.g., Excel automation, Python, LabVIEW, MATLAB) — depending on what you use internally., • Test planning and execution – ability to run structured tests on complex systems, • Understanding of mechanical and/or electrical systems, • Use of test equipment and instrumentation (setup, operation, validation), • Reading and interpreting technical documentation (drawings, schematics, work instructions), • Good computer literacy, • Data collection and analysis (capturing results clearly and consistently), • Basic understanding of system performance and validation principles, • Familiarity with calibration and measurement practices (where applicable to metrology), • Mechanical / Electrical assembly (desirable) Established in 1886, Taylor Hobson is the world leader in surface and form metrology and developed the first Roundness and Surface Finish measuring instruments. We provide contact and non-contact measurement solutions for the most demanding applications on a global basis, with a worldwide infrastructure to support our clients; we are a truly global ultra-precision metrology company. We are pioneers, continually developing our products to meet the ever-increasing demands of next generation technologies, particularly in Optics, Bearings, Space, Defence, Aerospace, Automotive, Medical and Renewable Energy technologies. Taylor Hobson's world leading brands include: Talyrond®, Form Talysurf® PGI, Form Talysurf® i-Series, Surtronic®, LUPHOScan, Formalysurf® PGI Optics, Talyvel®, Autocollimators, Micro-Alignment Telescope and AMECare. Taylor Hobson is part of the Ultra Precision Technologies Division of AMETEK, Inc. which is a leading global manufacturer of electronic instruments and electromechanical devices. Website: www.taylor-hobson.com Currency: GBP Salary Minimum: Market Salary Maximum: Market Incentive: Market Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.5 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers’ most complex challenges. We employ 22,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK is a component of the S&P 500. Visit careers for more information. #J-18808-Ljbffr

Embedded Software Test Engineer page is loaded## Embedded Software Test Engineerremote type: Onsitelocations: Leicester, UKtime type: Full timeposted on: Posted 30+ Days Agojob requisition id: JR100781Druck is a global leader in high‐precision pressure sensing technology. Our products operate in safety‐critical environments across aerospace, industrial, and energy sectors. We pride ourselves on delivering high‐integrity, high‐reliability solutions for customers around the world.We are now expanding our aerospace software capability and are seeking an Embedded Software Test Engineer to support the verification and validation of safety‐critical embedded software developed to DO‐178C Level A.Role OverviewIn this role, you will be a key contributor to the software verification and validation lifecycle, ensuring our embedded systems meet the highest aerospace safety and quality standards. You will work closely with software, and hardware engineers to design, execute, and document verification activities in line with regulatory and customer requirements.Key ResponsibilitiesSoftware Verification Activities Develop and execute test plans, test procedures, and test cases to support DO‐178C qualification. Ensure all tests provide clear traceability to high‐ and low‐level requirements. Perform unit, integration, hardware‐in‐the‐loop (HIL), and system‐level testing of embedded software. Conduct debugging, problem investigation, and defect reporting, working closely with the software development team.* Produce clear and accurate test reports, evidence packages, and certification documentation.Compliance & Quality Perform verification activities aligned with DO‐178C, DO‐330, and the company quality management system (AS9100). Participate in reviews of requirements, architecture, and code to assess testability and completeness.* Support structural coverage activities (including MC/DC) where required.Technical Contribution Interpret hardware datasheets, microcontroller documentation, and interface specifications to develop robust and realistic test scenarios. Work with embedded toolchains, debuggers, simulators, and automated test environments as needed.* Contribute to the continuous improvement of test processes, tools, and templates.Required Skills & ExperienceEssential Proven experience in software verification and validation in an aerospace or safety‐critical environment. Hands‐on experience applying DO‐178B/C practices, ideally to Level‐A. Strong understanding of embedded systems and experience testing microcontroller‐based software and low‐level communication protocols. Ability to understand and assess C source code for testability (coding not required, but comprehension is). Ability to interpret hardware documentation and interface specifications. Must hold a British passport or have the right to work in the UK.Desirable Experience with structural coverage (e.g., MC/DC using Parasoft ideally, but LDRA, VectorCAST, Cantata, etc. is also acceptable). Familiarity with requirements and configuration management tools (e.g., DOORS, GitHub). Experience with HIL/PIL test setups. Knowledge of tool qualification under DO‐330.What You’ll Gain Opportunity to work on cutting‐edge aerospace technology. Growth in DO‐178C expertise and exposure to high‐integrity engineering practices. A collaborative team environment with experienced engineers. Competitive salary and comprehensive benefits.Join UsIf you’re passionate about embedded systems, software testing, and high‐integrity engineering, we invite you to apply and grow your career with a globally respected engineering organisation.remote type: Onsitelocations: Leicester, UKtime type: Full timeposted on: Posted 30+ Days Ago #J-18808-Ljbffr

Would you like a Senior Manufacturing Engineer job based in Loughborough within a multi-million pound company at the forefront of technology? This Senior Manufacturing Engineer job is based in Loughborough but is commutable from Leicestershire, Tamworth, Nottingham, Burton Upon Trent and Long Eaton. The key purpose for the Senior Manufacturing Engineer job in Loughborough is to aid the design, manufacture, build and testing of component handling, assembly and inspection equipment, including characterisation of new process capabilities. The Senior Manufacturing Engineer based in Loughborough will have substantial relevant industrial experience.You will be park of the development and delivery of semi-automated and automated assembly equipment and processes.This will include demonstrable skills in manufacturing, build, testing and validation of solutions within an evolving and progressive industry It is a fantastic opportunity to join a successful and world leading Technology Company with cutting edge products who can offer dynamic, challenging and exciting job opportunities. #J-18808-Ljbffr

You will support documentation generation, requirements management, and cross-functional collaboration to ensure quality and timely delivery.

PepsiCo Deutschland GmbH is seeking an R&D Associate Process Engineer to lead deployment projects across Europe Foods. The role supports scoping, installation and commissioning of new non-centreline equipment and defines product validation plans to ensure successful commercialisation. You will conduct process and equipment risk assessments, drive development and qualification of process systems, lead pilot plant trials, and collaborate with Quality and Food Safety teams to ensure safe, #J-18808-Ljbffr

Temporary Industrial Placement – Electrical/ Electronic Systems When registering to this job board you will be redirected to the online application form. Please ensure that this is completed in full in order that your application can be reviewed. The Original British Motorcycling Company. Temporary Industrial Placement – Electrical/Electronic Systems (DE399) Please note: This position is for Undergraduates looking for a Placement Year within their course for the academic year 2027/28 only. Are you ready to push the boundaries of motorcycle design and performance? Triumph, a revered name in the motorcycle industry, seeking a skilled and passionate Electrical/Electronic systems Engineer on an industrial placement to join our team in Hinckley. The Industrial Placement student will work on tasks ranging from systems specification, Component Specification, Electrical Distribution System Design and test & Validation. The role will develop and test a broad range of skills which may include the design and development of whole vehicle circuit layout and wiring harnesses, specification and requirements definitions of a wide variety of electrical / electronic components and systems, development of test and instrumentation methods and may include practical electronics and embedded software projects. A variety of competitive benefits, including: • An enhanced holiday scheme, • Employee benefits platform, • Favourable life assurance scheme., • Motorcycles, clothing and accessories are available to purchase at a heavily discounted. Duties and Responsibilities: • The role will develop and test a broad range of skills which may include stakeholder reviews, feature definition, system design, hardware specification / circuit analysis, design of HIL Rig interfaces, 2D CAD design work, supplier liaison and practical testing in the workshop., • Undertake an induction programme which will give you the skills required for this role., • You will be required to communicate with external suppliers as well as other departments within the company such as Purchasing, Quality, Assembly and Manufacturing – developing key skills required by industry. Requirements for role: • Proficient in Microsoft packages, • Self-motivated and resilient. Flexible and adaptable. Able to take instruction and work under pressure. Excellent communication skills, clear and concise written and verbal skills., • Only open to university students who are studying an engineering related degree looking for a student placement for the academic year 2027-2028 Full details of the job description and person specification can be found in the downloadable job files. If you are passionate about engineering, eager to learn, and ready to contribute to exciting projects - Join Us for the Ride! Disclaimer: Due to the high volume of applications we receive, we reserve the right to close a vacancy earlier than the advertised date. This is to ensure our teams can manage application levels while maintaining a positive candidate experience. Once a vacancy has closed, we are unable to consider further applications, so please submit your application as soon as possible to avoid disappointment. JBRP1_UKTJ

Welding Engineer - Manufacturing assembly Welding Engineer - Manufacturing assembly with electrification and injection moulding inputs Coventry Up to £45,000 plus 33 days holiday (including bank holidays), pension, life assurance, employee assistance programme, wellbeing support, and flexible benefits including cycle to work scheme About the Role Unipart Manufacturing is launching a flagship, fast-paced manufacturing project in Coventry, combining high-volume electrification assembly with complex injection moulding inputs. Fully aligned with Unipart's Sector and Growth Strategy and The Unipart Way Forward Plan, this exciting venture will scale rapidly from zero to over 200 team members within a four-month period. We are seeking a technical, hands-on Welding Engineer to lead the development, validation, and process control of critical joining activities across battery module packs, electrification assemblies, and specialised fabrications. Joining at the ground level, you will translate engineering specifications into robust Weld Procedure Specifications (WPS), oversee weld quality testing, and bridge prototype development into volume series manufacturing in a high-impact environment. As part of your key responsibilities you'll focus on: Weld Process Development - Develop, optimise, and validate welding and joining processes (including power beam, TIG, and MIG welding) from concept through to volume series production Specification and Governance - Translate customer engineering requirements into detailed Welding Engineering Specifications, generating Weld Procedure Specifications (WPS) and supporting process validation (PV) schedules Quality Assurance and Testing - Implement destructive and non-destructive weld quality control methods, utilising materials laboratory equipment (optical, metrology, x-ray) to evaluate joint integrity and process capability NPI and Quality Core Tools - Develop and maintain PFMEAs, Control Plans, and designed experiments (DOEs) to support New Product Introduction (NPI) and rapid root-cause problem solving Safety and Regulatory Compliance - Ensure all welding operations adhere strictly to industry standards, internal quality systems, and site Safety, Health & Environmental (SHE) procedures About You We'd love you to have the following skills and experience, but please apply if you think you'd be able to perform well in this role! Welding Engineering Background - Proven experience as a Welding Engineer, Metallurgy Specialist, or Process Engineer within automotive, aerospace, defence, or high-precision manufacturing environments Joining and Materials Expertise - Hands-on experience in power beam welding, TIG/MIG welding, or advanced materials joining, with a solid understanding of metallurgy and weld defect analysis Quality and Lab Testing Knowledge - Familiarity with weld testing frameworks, destructive/non-destructive inspection methods, metrology, and materials laboratory processes Qualifications and Problem Solving - Degree or HND in Materials Science, Metallurgy, Mechanical, or Manufacturing Engineering (or equivalent practical industry experience) with strong data-driven decision-making skills About Unipart We are a supply chain performance improvement partner. We Design, Make, Move, and Improve components in our customers' supply chains, keeping their operations and assets moving and working better, for longer. Through our commitment to continuously driving operational efficiencies, we improve performance - saving time, cost, and carbon. Our ambition is to be the driving force behind efficient, resilient, and sustainable supply chains. Equality, Diversity, and Inclusion We believe that a great workplace is one where you can bring your whole self to work. Our recruitment process is designed to be accessible, inclusive, and based entirely on merit. We define merit through a combination of technical skills and the core behaviours that help our people thrive at Unipart. We welcome applications from everyone, regardless of background or circumstances. We are committed to a policy of equal opportunity that exceeds our statutory obligations under the Equality Act 2010 and subsequent legislation. Whether it's your age, disability, neurodiversity, gender identity, family status, or any other characteristic that makes you ‘you' - it is your talent and potential that we value most. Adjustments for you: We want you to perform at your best. If you require any reasonable adjustments or have specific accessibility needs at any stage of the application or interview process, please let us know. We are here to support you. You may have experience in or be interested in the following: metallurgist, welding specialist, process engineer, joining engineer, materials engineer, weld process engineer, NDT engineer, welding technologist, manufacturing engineer, weld quality engineer JBRP1_UKTJ

Project Engineer. £45,000 - £50,000 • Project Engineer, Commercial Engineer, Development Engineer or similar. Responsible for the design and development of new technical products used in the Automotive, Motorsport, Transport and Defence industries., • Rough salary range of £40,000 - £50,000 dependent on the individual + Wider benefits package., • Working for an SME business – this will be an extremely varied role and will require you to be dynamic, will suit someone who is used to working in a smaller sized business operating at a fast pace in a rapidly changing environment. Are you an experienced Project Engineer looking for a role where you can take ownership of projects, work directly with customers and be involved in a wide variety of engineering challenges? This is an exciting opportunity to join a growing, independent engineering business based in Coalville, working with customers across a diverse range of technically interesting industries. The business operates as an engineering partner to its customers, providing expertise across design, engineering analysis, testing and production engineering. Due to continued growth, they are looking to appoint a Project Engineer who can play an important role in delivering customer projects and contributing to the ongoing development of the business. This Project Engineer job will suit: • A Project Engineer, Commercial Engineer, Development Engineer, Costing Engineer or similar role., • We're looking for a practical and commercially aware engineer who enjoys taking ownership and seeing projects through from start to finish., • You could currently be working as a Project Engineer, Design Engineer, Mechanical Project Engineer, Development Engineer or similar, ideally within an engineering or manufacturing environment., • HNC, HND, BEng, MEng or equivalent engineering qualification, or substantial relevant engineering experience., • Experience with CAD and standard Microsoft Office applications., • A good understanding of design development, manufacture, assembly, verification and engineering change control., • Strong communication and stakeholder management skills. This Project Engineer job will involve: • As Project Engineer, you will take engineering projects from initial customer requirements through design, validation and delivery., • This is a varied position combining technical engineering, project coordination and customer interaction. You'll work alongside engineers, designers, CAD specialists, suppliers and customer teams to ensure projects are delivered effectively, on time and to the required standard., • You will have the opportunity to work across multiple sectors, meaning this is not a role where you'll be working on the same product or project repeatedly. This job is commutable from Coalville, Ashby De La Zouch, Loughborough, Leicester, Kegworth, Castle Donington, Nottingham, Market Bosworth, Hinckley and surrounding areas To apply please contact Danny Turnock at Euro Projects Recruitment Ltd. Visit the Euro Projects Recruitment website to search our latest permanent, contract and interim vacancies. “Please note that if you are not contacted within the next ten days then your application, on this occasion, has not been successful. We thank you for taking the time to apply.” Reference: PR/006721 JBRP1_UKTJ

Job Title: Research Associate in the Digital Validation of Engineered Porous Structures, Loughborough Application Closing Date: Sunday, 11 October 2026 Wolfson School of Mechanical, Electrical and Manufacturing Engineering Full Time, Fixed term for 12 months initially, extendable to 24 months pending funding review Loughborough University is committed to allowing its employees to work dynamically with a combination of working on campus and remotely, where possible Join us and be part of a vibrant research community at Loughborough University. Heres more about the role and what were looking for: Were on the lookout for an individual to support a project that involves the functional modelling of porous structures and foams that have been manufactured using Advanced Manufacturing techniques using metallic, ceramic, polymeric materials or composites. This modelling will inform design decisions for the optimisation of subsequent iterations in the design, manufacture and post-treatment. Functional modelling is the in silico testing (i.e. digital validation) for the assessment of mechanical performance, fluid mechanics properties (e.g., permeability) and chemical reactions, necessary to accelerate the innovation cycle and reduce wastage. The work will include simulation, validation and verification of products and processes, exploring the concepts of Smart testing via in-silico approaches confirmed by ex-silico/experimental results; design of experiments, data harvesting, collation, analysis and interpretation to derive insight and guide engineering design; communicating research results and outputs to a scientific audience as well as the general public. Key Requirements: Experience of deriving experimental designs and protocols in a simulation environment; formal requirements capture Experience of performing simulations that include mechanical behaviours (incl. fatigue) and flow (i.e. CFD). Experience handling 3D volumetric reconstructions and software for analysis Experience with COMSOL Multiphysics or similar simulators/software Excellent communication and interpersonal skills Excellent self-management and organisational skills as well a committed approach to work Willing to work as part of a team and proven performance in a collaborative environment Demonstrated ability to write scientific reports, manuscripts and deliver presentations to a specialist audience. Why should you apply? We are looking for an engineer or scientist who has experience in the use of engineering analysis software, specifically mechanical finite element analysis, computational fluid dynamics and/or Multiphysics software (esp. COMSOL). If this role sound of interest, wed love to hear from you. Informal enquiries should be directed via email to Professor Paul P Conway ( ) or Professor Carmen Torres ( ) For further support with your application, please refer to our application guidance, which includes some top tips to help you when completing your application. We are happy to consider any reasonable adjustments that you feel may support you during the recruitment process. If there are any adjustments that you would like to discuss, please contact ( ). For more information refer to the Job Description and Person Specification. Closing Date: October 11th 2026 Our Benefits At Loughborough, our benefits are designed to support your life inside and outside of work, helping you to thrive and feel valued as part of our community. Examples of our benefits include: Time off - generous holiday allowance, including 14 university closure days and bank holidays, with the option to buy extra through our holiday purchase scheme Where you work access to a range of fantastic facilities with plenty of green space across our 523-acre East Midlands campus, plus an exciting community at our London campus on the Queen Elizabeth Olympic Park Financial wellbeing competitive pay, two excellent pension schemes, and everyday savings opportunities Support for you and your family on-site nursery at our East Midlands campus, flexible and hybrid working options, and a range of family-friendly policies Health and wellbeing discounted gym memberships and access to world-class sporting facilities, including physiotherapy, plus healthcare offers such as eyesight testing and wellbeing support Travel and sustainability - access to our electric vehicle and cycle-to-work schemes, as well as a variety of travel offers to support sustainable commuting Discover more about the full range of rewards and benefits at Loughborough University. Loughborough University is committed to achieving equality and valuing diversity in all aspects of employment and welcomes applications from all sections of the community.

Advanced Engineering Lead Senior Advanced Engineering Lead - Advanced Manufacturing Scale-Up (assembly with electrification and injection moulding inputs) Coventry Up to £70,000 plus car/car allowance, 33 days holiday (including bank holidays), pension, bonus, life assurance, employee assistance programme, wellbeing support, and flexible benefits including cycle to work scheme About the Role Unipart Manufacturing is launching a flagship, fast-paced manufacturing project in Coventry, combining high-volume electrification assembly with complex injection moulding inputs. Fully aligned with Unipart's Sector and Growth Strategy and The Unipart Way Forward Plan, this critical project will scale from zero to over 200 employees within just four months. We are seeking a high-calibre Senior Advanced Engineering Leader (Engineering Manager) with deep technical expertise in electrification and injection moulding assembly. Reporting directly to senior executive leadership, you will drive operational engineering strategy, building a high-performing engineering capability from the ground up. As part of your key responsibilities you'll focus on: Engineering Strategy and NPI - Lead the operational engineering strategy, capital equipment/tooling investments, plant layouts, and NPI processes to ensure fast-paced project delivery Electrification and Moulding Technical Delivery - Direct process control, equipment care (TPM), and engineering solutions across high-volume electrification assembly lines and polymer/injection moulding inputs Quality and QCD Performance - Maintain best-practice tooling and process specifications to hit quality, cost, and delivery (QCD) targets, maintaining zero-defect and right-first-time engineering standards Lean Culture and The Unipart Way - Embed Unipart Way systems, root-cause problem-solving (FMEA), continuous improvement tools, and standardised processes across the engineering team Compliance and Standards - Oversee process control adherence, safety rules, AQAP 2110 / AS9100D, and ISO 14001 / Def Stan 00-056 standards, ensuring full engineering compliance, configuration management, and defense requirements across all production lines Change Management - This is a fast-paced, evolving project where your scope will grow alongside the initiative itself - while core deliverables are clear, flexibility is key - you'll have the opportunity to shape processes, adapt to changing priorities, and directly influence the project's direction as it unfolds About You We'd love you to have the following skills and experience, but please apply if you think you'd be able to perform well in this role! Engineering Leadership - Proven track record managing an engineering department or senior engineering function, ideally within the Defence sector Quality and Systems Background - Defence or Aerospace manufacturing background (MoD / NATO supply chain) with experience operating under AQAP 2110 or AS9100D frameworks Line Validation and Inspection - Experience with First Article Inspection Reports (FAIR / AS9102) and formal defense line-validation processes (AS9145 or Def Stan 05-61) Configuration and Safety Management - Knowledge of Defence Configuration Management standards and Safety Risk Assessment frameworks like Def Stan 00-056 or POEMS (Project Environment and Safety Management System) Qualifications - Undergraduate degree in Engineering (Mechanical, Electrical, or Production), Science, or equivalent demonstrable experience; FMEA/Lean Six Sigma expertise is highly desirable About Unipart We are a supply chain performance improvement partner. We Design, Make, Move, and Improve components in our customers' supply chains, keeping their operations and assets moving and working better, for longer. Through our commitment to continuously driving operational efficiencies, we improve performance - saving time, cost, and carbon. Our ambition is to be the driving force behind efficient, resilient, and sustainable supply chains. Equality, Diversity, and Inclusion We believe that a great workplace is one where you can bring your whole self to work. Our recruitment process is designed to be accessible, inclusive, and based entirely on merit. We define merit through a combination of technical skills and the core behaviours that help our people thrive at Unipart. We welcome applications from everyone, regardless of background or circumstances. We are committed to a policy of equal opportunity that exceeds our statutory obligations under the Equality Act 2010 and subsequent legislation. Whether it's your age, disability, neurodiversity, gender identity, family status, or any other characteristic that makes you ‘you' - it is your talent and potential that we value most. Adjustments for you: We want you to perform at your best. If you require any reasonable adjustments or have specific accessibility needs at any stage of the application or interview process, please let us know. We are here to support you. You may have experience in or be interested in the following: engineering manager, manufacturing engineering manager, process engineering manager, senior engineer, engineering lead, principal engineer, quality engineering manager, production engineering manager, technical manager, NPI engineering manager JBRP1_UKTJ

Overview In this Design Engineer role, you will design and validate drivetrain components and transmission systems for Caterpillar’s wheel loaders, tele handlers, and backhoe loaders. You will work across new product introduction and current programs to deliver reliable, high-performance solutions that meet customer needs. You’ll collaborate with manufacturing, suppliers, and global teams to drive production release and continuous product improvements. This position offers the chance to shape critical driveline technology within a global leader in heavy equipment. Pay / Benefits27 days annual leavebank holidays10% Bonuscontributory pension scheme with employer match up to 10%contributory share scheme with 50% employer matchEmployee Support Networks ResponsibilitiesDefine requirements and propose technical solutions aligned with customer and business needsLead and support design and development of drivetrain components from concept to production releaseCreate detailed designs and support prototype, verification, testing, and validationAssess risks, compare solutions, and balance performance, quality, durability, and costCollaborate with manufacturing, suppliers, purchasers, customers, and global teams to ensure successful outcomesCommunicate technical updates and recommendations to stakeholders and support product improvements and NPI activities Key requirementsTranslation of customer/product requirements into robust engineering solutionsExperience in CAD-enabled design of drivetrain components and assembliesAnalytical thinking to identify root causes and balance performance, quality, durability, costAbility to plan and coordinate multiple engineering activities with minimal supervisionMechanical engineering fundamentals and drivetrain knowledge (transmissions, gears, shafts, bearings, housings, wet clutches, hydraulics)Experience with validation, prototype development, testing, and production launchAnalytical thinkingCross-functional collaborationEffective communicationCAD toolsDrivetrain design and developmentPrototype validation and testing

Storage Engineer | Automation | Remote 6 months initially | £610 per day | Outside IR35 We're looking for an experienced Storage Engineer with strong automation and infrastructure-as-code experience to join a technical team working on the delivery, integration and optimisation of enterprise storage infrastructure. This is a hands-on role where you'll be responsible for automating storage provisioning, supporting integrations into existing environments, and ensuring storage services are fully tested and production-ready. Key Responsibilities Automate the provisioning and configuration of enterprise storage environments. Develop and maintain Terraform-based pipelines to enable efficient and repeatable storage deployment. Build and support self-service workflows for storage provisioning. Integrate storage provisioning processes with internal forms and API-driven workflows. Work closely with storage platform vendors and internal engineering teams to resolve integration and deployment issues. Support the onboarding of storage services into production environments. Troubleshoot connectivity, mounting and storage availability issues across environments. Carry out storage validation and performance testing to establish baseline metrics. Verify that storage flows and mounts operate correctly before and after production deployment. Identify and resolve issues across the storage provisioning and integration lifecycle. Contribute to improving automation, reliability and operational efficiency across the storage environment. Key Skills & Experience Strong commercial experience as a Storage Engineer / Storage Infrastructure Engineer. Hands-on experience with VAST Data or comparable enterprise-scale storage platforms. Strong Terraform experience, particularly developing or integrating Terraform modules and pipelines. Experience automating infrastructure provisioning and deployment processes. Good understanding of storage provisioning, mounts, connectivity and troubleshooting. Experience with API integrations and automated/self-service workflows. Experience testing storage environments and validating performance against baseline metrics. Comfortable working with vendors and internal infrastructure/engineering teams. Strong troubleshooting and problem-solving skills. If this sounds like a fit, APPLY NOW! Storage Engineer | Automation | Remote 6 months initially | £610 per day | Outside IR35 Oscar Associates (UK) Limited is acting as an Employment Business in relation to this vacancy. To understand more about what we do with your data please review our privacy policy in the privacy section of the Oscar website. JBRP1_UKTJ

Senior Electronics Engineer – R&D Location: Leicester Salary: £55,000 – £65,000 + Benefits Job Type: Permanent | Full-Time Sector: Electronics | R&D | Precision Engineering | Manufacturing Are you an experienced Electronics Engineer looking to work on complex, high-value engineered products? Do you enjoy combining electronics design and embedded development with hands-on prototyping and problem solving? Looking for a role where you can influence products throughout the complete development lifecycle? An established global precision engineering manufacturer is looking to recruit a Senior Electronics Engineer to join its R&D team in Leicester. The business designs and manufactures sophisticated, high-value electro-mechanical equipment for customers across a range of advanced technology sectors. This is an excellent opportunity for an experienced Electronics Engineer who wants a varied position combining electronic hardware, embedded firmware, systems engineering and hands-on R&D . The Role As Senior Electronics Engineer, you'll work across the complete product lifecycle – from initial concepts and prototypes through to manufacture, product improvement and ongoing lifecycle support. You'll collaborate closely with Mechanical, Software and Manufacturing Engineers, taking ownership of electronic development and helping resolve complex system-level engineering challenges. Key Responsibilities Design and develop electronic hardware, control systems and embedded firmware for complex electro-mechanical equipment. Carry out schematic capture, PCB design, prototyping, testing and product validation. Develop embedded hardware involving microcontrollers, data acquisition, communications and motor control. Troubleshoot complex electronic and system-level issues, working cross-functionally to develop robust solutions. Support products from R&D through to manufacture, including DFM, documentation and ongoing product development. Skills & Experience 5+ years' experience in electronics design and development within machinery, instrumentation, automation or complex electro-mechanical products. Strong understanding of analogue and digital electronics, schematic capture and PCB design. Experience developing hardware and firmware for microcontrollers, including communications, data acquisition and/or motor control. Practical, hands-on engineering capability covering prototyping, testing, fault finding and PCB rework. HNC, HND or Degree in Electronics/Electrical Engineering, or equivalent experience. Why Apply? £55,000 – £65,000 basic salary plus comprehensive benefits. Work on complex, bespoke, high-value engineering products. Excellent combination of R&D, electronics design and hands-on engineering . Significant technical ownership across the full product lifecycle. Long-term development opportunities within an established global engineering organisation. Apply Today This is an excellent opportunity for a Senior Electronics Engineer, Electronics Design Engineer, Electronics Development Engineer, Hardware Engineer or Embedded Electronics Engineer looking for greater technical variety and ownership. If you enjoy designing electronics, building prototypes and getting hands-on to solve challenging engineering problems , apply today for a confidential discussion. TPBN1_UKTJ

In this role you'll do work that matters. You'll be part of a team tackling complex challenges, developing innovative solutions and helping to protect the people and places that depend on us. Whether you're bringing years of experience or looking to take the next step in your career, you'll have the opportunity to work on meaningful projects, collaborate with talented people and develop your skills in an environment where your contribution can make a real difference. Join us and help shape the future of defence, security and aerospace. The Principal Product Security Engineer is a senior technical leader within the Product Security team, acting as the focal point for Information Assurance (IA) and Product Security across the PMS domain within the wider platform programme. Operating within a highly collaborative, multi-disciplinary engineering environment, the role is responsible for defining and delivering security engineering activities in line with the programme Engineering Management Plan and Project Information Assurance Management Plan, ensuring consistency with approved processes, templates and governance. The Principal Engineer leads the development of security artefacts required to achieve system design maturity and contractually agreed readiness, including Security Cases, risk management activities, and support to design assurance and review gates. They work closely with internal engineering teams, transversal Whole Boat Product Security (WBPSec) stakeholders, and external suppliers to ensure coherent and integrated security outcomes across the platform. This is a delivery focused, milestone driven role requiring strong systems engineering awareness, stakeholder influence and the ability to apply pragmatic, risk based security solutions within programme constraints. • Define, agree and deliver Product Security engineering activities in line with the programme Engineering Management Plan, • Ensure all security activities are performed in accordance with approved processes, templates and guidance with deviations appropriately controlled, • Act as the primary Product Security SME for PMS within programme working groups (e.g. PMS SWG), • Lead the development of PMS Interim and Final Security Cases across defined programme phases, • Maintain alignment between system-level security artefacts and Whole Boat IA risk management approaches (WBPSec), • Maintain and manage PMS contributions to the Whole Boat IA Risk Register, • Identify, assess and document IA requirement shortfalls and associated risks, • Manage and coordinate IA Technical Queries (TQs) and formal communications in line with programme processes, • Ensure technical outputs consider security classification and handling constraints (e.g. NNPPI, ITAR), • Operate within defined communication and data management processes (e.g. formal transmittals, controlled repositories, structured workflows), • Plan and manage Product Security activities to meet programme milestones and delivery schedules., • Provide regular reporting into project governance, including:, • Schedule and activity progress, • Risk and opportunity updates, • Key milestone status, • Identify risks to delivery early and support mitigation and recovery planning., • Provide technical leadership and mentoring within the PMS Product Security team., • Support consistency, quality and repeatability across Product Security outputs., • Contribute to continuous improvement of Product Security methods, tooling and practices. The Principal Engineer will be accountable for delivery and support of: • PMS Interim and Final Security Cases (multi-phase delivery)., • Development and maintenance of the PMS IA/Security Risk Register, • Contributions to the Whole Boat IA Risk Register and associated artefacts., • IA inputs to PMS Test, Set-to-Work, and verification strategies., • Management and resolution of supplier IA Technical Queries (TQs)., • Supplier IA/Cyber artefact reviews and assurance outputs., • Inputs to PMS Formal Design Reviews, FDP/FTP Groups, and lifecycle review gates., • PMS IA requirement capture, validation and gap analysis outputs., • Contributions to PMS IA process development and continuous improvement activities., • Monthly project review inputs, including progress, risks, issues and milestone tracking., • Strong understanding of Information Assurance and Product Security within complex engineered systems, • Possesses and understanding of Secure by Design concept versus Security Accreditation process, • Experience within large scale, highly regulated programmes (e.g. defence, maritime, aerospace), • Working knowledge of systems engineering lifecycle and design assurance processes, • Proven experience delivering security cases and managing information risk, • Experience engaging with and assuring supplier deliverables, • Awareness of Whole Boat/ Platform level security integration approaches (desirable), • Awareness and knowledge of the application of HM Government Information Security Standards IS 1 & 2 to complex products, • Awareness and knowledge of the application of ISO 27000 series of Standards to complex products, • Awareness and knowledge of the application of IEC 62443 series of Standards to complex products, • Familiarity with Security Technical Security Testing scoping and test specification #J-18808-Ljbffr

Morson Human Resources Limited is seeking a Test Systems Engineer with expertise in System Integration, Verification & Validation to ensure successful deployment and integration of complex electromechanical systems. The ideal candidate will have strong experience in conducting verification and valid

MBDA is offering an Integration & Missile Validation Engineer undergraduate placement for 2027.

Senior Verification & Validation Engineer (Hardware/Electronic Products). You will also play a key part in mentoring junior engineers and influencing engineering quality across the wider team. Apply today to be considered for the Senior Verification & Validation Engineer position based in Cambridge.

Validation Engineer to lead projects and provide consultancy on clean-room design. Located in Surrey, the ideal candidate will have qualifications in applied biology or biochemical engineering and experience in regulated environments. The role involves executing validation protocols and ensuring com

A specialist employment agency is seeking a V&V Engineer with proven experience in system testing and validation for a luxury vehicle manufacturer. The role involves coordinating vehicle validation events, requiring hands-on knowledge of dynamic and static testing.

A research and consultancy firm is looking for a Process Validation professional to support their thermal processing clients through consultancy, training, and research activities. Responsibilities include managing scientific projects, consultancy services, and developing engineering solutions.

This challenging role requires an engineer experienced in system testing, validation / verification engineering. As the V&V Engineer with a luxury vehicle manufacturer you will contribute to the coordination and delivery of dynamic and static vehicle validation events. Proven experience in system te

SII UK is seeking an Electrical AIT Engineer to support the preparation, integration, validation and testing of complex space systems.

Your key responsibilities will include executing validation plans, supporting validation at customer sites, and collaborating across engineering disciplines to ensure our products meet rigorous standards. Sonardyne is seeking a Software Validation Engineer to ensure the quality and performance of ou

Johnson & Johnson is seeking a Senior Process Engineer to own and optimize manufacturing value streams for medical devices, ensuring safety, compliance, and cost efficiency. You will provide strategic technical leadership and manage complex development and validation projects. You will mentor junior

As we continue to develop increasingly complex integrated systems, we are seeking a Software Validation Engineer to help ensure the quality, reliability, and performance of our products. Working closely with software developers, systems engineers, project managers, and wider stakeholders, you will c

Canopy Simulations Ltd is seeking a Test and Development Engineer to advance the company’s performance simulation software and testing ecosystem. You will own validation, create test suites, and contribute to release quality across Linux, Windows, and real-time systems.

EPM Scientific is seeking a Senior Validation Engineer for a 6+ month contract in Hertfordshire. The successful candidate will lead equipment relocation, qualification, and revalidation, execute IQ/OQ/PQ protocols, and drive packaging and process validation across multiple product lines, ensuring sm

Morson Group in the United Kingdom is seeking a Routing Validation Process team member to support the delivery of high-quality SOIs and production processes within aircraft wing manufacturing.

A leading technology manufacturer in Cambridge is seeking a Senior Verification & Validation Engineer to own product-level testing and validation for innovative safety-critical electronic products. Responsibilities include developing test strategies, executing verification and validation activities,

Expleo Group UK Jobs is recruiting ADAS Test & Validation Engineers to support our automotive client based in Warwickshire on a contract basis. The role focuses on end-to-end vehicle validation for ADAS and connected car features. You will follow established test methods and procedures to ensure rob

Senior Aerospace BWT is seeking a Technical Engineer to analyze, test, qualify and validate aircraft Environmental Control Systems (ECS), ducting and insulation products. The role involves supporting product development activities and ensuring airworthiness throughout the qualification process, with

ResponsibilitiesValidate high-speed SerDes PHYs and perform link bring-up, equalisation and performance testingExecute chip and system validation across Process, Voltage and Temperature (PVT) conditionsUtilise lab equipment (osc

Your work supports cutting-edge space payloads and global connectivity, with opportunities to shape test automation and validation in a high-tech environment. ResponsibilitiesDefine and execute system test strategies for embedded platformsPerform sy

As a validation engineer you will also be performing xdjnayx engineering studies to evaluate new products or components, new machine validations, chang. Our Client is seeking a validation engineer within the Pharmaceutical / Medical Device sector to execute protocols to demonstrate that manufacturin

Where those who love pizza can be their true self.Plus tips - You'll receive tips/Tronc* .Wellbeing Support for you and your family .Referral Bonus of €450 for referring pizza chefs and €1150 for referring managers .Learning and Development Opportunities to invest in you .You’ll be the

BS/BA or experience in the role of Engineer. We are always looking for passionate and talented software developers to join our geographically-distributed engineering team.