Trabajos commercial hvac en Linden, New JerseyCrear alertas

Job DescriptionJob Summary Under the direction of the Superintendent or General Foreman, the Mechanic is responsible for repairing and maintaining buses and other fleet vehicles to ensure safe and reliable operation. Key Responsibilities: • Perform testing, repair, installation, and maintenance on diesel engines, transmissions, HVAC, electrical systems, brake systems, suspension, steering, and electronic components., • Remove, inspect, repair, and replace defective parts and vehicle components., • Rebuild diesel engines and replace engines and transmissions as required., • Diagnose mechanical and electrical issues using appropriate diagnostic tools., • Perform repairs using hand tools, power tools, welding equipment, and measuring instruments., • Adjust diesel engine components such as valves, timing, and injectors., • Inspect and maintain brake systems, bearings, axles, wheel bearings, and air brake components., • Perform preventive maintenance including oil changes, filter replacements, tire replacements, and light repairs., • Determine equipment serviceability and ensure vehicles meet operational standards., • Follow safety procedures and maintain compliance with workplace regulations. Qualifications: • High School Diploma or GED., • Minimum 3 years of mechanical experience, preferably with diesel engines., • ASE certification is a plus., • Valid driver's license with the ability to obtain the required commercial license and endorsements., • Ability to pass background screening and physical examination., • Good driving record., • Ability to work first or second shift with overtime as needed.

Job Description Allegiance Isuzu Trucks of Mountainside, New Jersey is seeking Military Veterans with mechanical experience who are interested in beginning a rewarding career as an Isuzu Service Technician. This opportunity is part of the Isuzu Veterans Apprenticeship Program (IVAP), a U.S. Department of Labor and GI Bill®-approved Registered Apprenticeship program designed to help qualified Veterans transition into the commercial truck industry. Through IVAP, participants may gain hands-on dealership experience while working toward successful completion of apprenticeship and certification requirements. IVAP connects qualified applicants with participating Isuzu dealerships seeking skilled technical talent. Qualified applicants receive recruiting support, technical screening, dealership referral assistance, and guidance through the Registered Apprenticeship and GI Bill® benefits process, where eligible. What You Will Do As an Isuzu Service Technician Apprentice, you may support dealership service operations by assisting with the inspection, diagnosis, maintenance, and repair of Isuzu commercial vehicles. This may include working alongside dealership service teams, participating in on-the-job learning, and completing program-related apprenticeship requirements. Ideal candidates may have experience in one or more of the following areas: • Wheeled vehicle maintenance, • Diesel mechanics, • Heavy equipment maintenance, • Automotive repair, • Aircraft maintenance, • Generator maintenance, • Fleet maintenance, • Military maintenance supervision Requirements • Transitioning Service Member or U.S. Military Veteran status, • 3–5 years of military or civilian technician work experience, • Honorable military discharge or Commander’s Statement of Service, • Hands-on experience with diesel, automotive, heavy equipment, aircraft, generator, fleet maintenance, or related mechanical systems, • Ability to provide work references, • Clean driving record, as attested by the applicant, • Ability to complete the IVAP technical assessment, • Ability to pass applicable dealership background, driving record, or drug screening requirements Preferred qualifications include: • Diesel engine maintenance or repair experience, • Experience with commercial trucks, fleet vehicles, or heavy equipment, • Familiarity with diagnostic tools, hand tools, and shop equipment, • Experience working with electrical, braking, suspension, HVAC, or driveline systems, • ASE certifications, technical school training, or military maintenance training, • Strong troubleshooting, communication, and teamwork skills Benefits Isuzu IVAP Apprenticeship Highlights • Potential full-time employment with a participating Isuzu dealership, • Program designed specifically to support Transitioning Service Members and U.S. Military Veterans, • Participation in a U.S. Department of Labor and GI Bill®-approved Registered Apprenticeship program, where eligible, • Eligible Veterans may apply for and receive GI Bill® benefits during the apprenticeship, where eligible, • Access to tools, equipment, vehicles, and training needed to complete apprenticeship and certification requirements, as provided through the participating dealership and IVAP program structure, • Opportunity to apply military mechanical experience toward a civilian Isuzu Service Technician career, • Recruiting support, technical screening, dealership referral assistance, and apprenticeship process guidance Hiring decisions, wages, employee benefits, employment offers, and employment conditions are determined by the participating Isuzu dealership. Applicants are applying for employment with a participating Isuzu dealership and not with Isuzu Commercial Truck of America, Inc. or Educational Resource Systems, Inc. GI Bill® is a registered trademark of the U.S. Department of Veterans Affairs (VA). Use of the term does not imply endorsement, affiliation, or approval by VA.

Job DescriptionSummary: Haddad Plumbing and Heating Inc. is seeking an experienced Warehouse Associate to join our team at our headquarters in Newark, New Jersey. The Warehouse Associate will perform an array of functions that may include receiving and processing incoming stock and materials, picking and filling orders from stock, packing and shipping orders, or managing, organizing and retrieving stock in the warehouse. Responsibilities: • Loading and unloading delivery trucks and vendor shipments quickly, safely, and accurately, • Receiving, processing, and organizing incoming plumbing and HVAC merchandise, • Storing materials in designated locations to maintain an efficient layout, • Picking, packing, and preparing orders and parts for our commercial projects, • Conducting regular inventory checks to ensure accuracy, • Collaborating with management to flag and resolve any stock or order discrepancies, • Any other tasks assigned by managerWhat We Are Looking For:, • Industry Knowledge: Minimum 1 year of warehouse/stocking experience, with specific experience in Plumbing or HVAC supply required, • Physical Capability: Ability to safely lift and move up to 50 pounds, and comfortably handle the repetitive loading/unloading of freight, • Detail-Oriented: Proficient in reading numerical data, verifying packing slips against shipments, and following instructions accurately, • Team Player: Strong collaboration skills and a commitment to maintaining warehouse safety protocolsCompensation: $18.00 - $20.00 / Opportunity for Overtime Weekly • After 40 Hours Overtime Rate: $28.50 - $30.00, • Protanal to Earn: $988.00 – $1,040.00 Gross Per WeekPosition Type:, • Full-TimeSchedule:, • Monday – Saturday, 7:00 AM – 3:30 PMOur Benefits Package Includes:, • Health & Wellness: Comprehensive Medical, Dental, and Vision insurance., • Retirement: 401(k) plan with a company match to help you build your future., • Paid Time Off: Generous Paid Time Off (PTO), paid vacation days, and paid holidays., • Growth: Real opportunities for career advancement within our growing company.Sign-On Bonus Details:, • We reward reliability and hard work right from the start with a $500 Sign-On Bonus split across two milestone payouts based on clear performance goals:, • First Payout ($250 at 30 Days): Awarded for consistent on-time attendance (7:00 AM sharp) and completing introductory training on our plumbing/HVAC inventory layout., • Second Payout ($250 at 90 Days): Awarded for maintaining a safe, incident-free work record and demonstrating independent, accurate order-picking.Why Join Haddad Plumbing & Heating? At Haddad, we are a leading commercial plumbing and HVAC contractor trusted with major new construction projects across New Jersey. We owe our success to our hardworking team, and we believe in paying them well for their hard work. Because our schedule includes a mandatory Saturday shift, you receive 8 hours of potential overtime (Time-and-a-Half) every single week. When you join us, you get major financial stability, a powerhouse benefits package, and a clear path to advance your career. Powered by JazzHR 7PtgsZcBLj

Job Description About VCI VCI Emergency Vehicle Specialists is the Northeast’s leading supplier and service provider of ambulances. For more than 40 years, VCI has served fire departments, EMS agencies, municipalities, hospitals, and private medical transport organizations. VCI is a Ford Qualified Vehicle Modifier (QVM) certified remount facility and supports customers through ambulance sales, remounting, service, repair, body work, graphics, parts, and mobile service. Position summary The Senior Ambulance Remount Technician performs the skilled mechanical, electrical, fabrication, and systems-integration work required to remove an ambulance module from its existing chassis, refurbish or modify it as needed, and install it safely on a new chassis. The successful candidate is a versatile craftsperson who can read schematics, diagnose 12-volt electrical systems, fabricate precise solutions, and take personal ownership of quality, safety, and schedule. What you will do • Complete ambulance remount projects from initial teardown through final inspection and delivery., • Inspect and document the incoming unit; identify damage, wear, corrosion, fit-up issues, and scope changes before and during teardown., • Safely disconnect, lift, remove, position, align, and secure ambulance modules using approved fixtures, lifting equipment, mounting methods, and torque requirements., • Prepare and modify new chassis and existing modules, including body mounts, brackets, steps, bumpers, cab-to-module interfaces, trim, seals, and related structural components., • Fabricate and install components using measurement, layout, cutting, drilling, grinding, fastening, and welding techniques appropriate to steel and aluminum., • Install, route, terminate, test, and troubleshoot 12-volt DC and 120-volt AC circuits, wiring harnesses, multiplex controls, warning systems, scene lighting, shore-power systems, and vehicle accessories., • Integrate and test module systems such as HVAC, oxygen and suction plumbing, cabinetry, seating, doors, latches, windows, lighting, and safety equipment, as assigned., • Diagnose fitment, electrical, mechanical, and finish-quality problems; develop sound repairs instead of passing defects downstream., • Perform functional testing, leak checks, quality inspections, punch-list corrections, and road-test support before release., • Follow applicable OEM instructions, Ford QVM requirements, federal vehicle safety requirements, and VCI quality and safety procedures., • Accurately record labor, parts, inspection results, and work completed; communicate delays, material needs, and scope concerns early., • Maintain a clean, organized, and safe work area and help less-experienced technicians improve their skills., • All other duties as assignedRequired qualifications, • At least 3 years of hands-on experience in ambulance remounting, emergency-vehicle upfitting, specialty-vehicle manufacturing, truck-body installation, fleet repair, or a closely related trade., • Demonstrated ability to diagnose and repair 12-volt DC electrical systems using wiring diagrams, a digital multimeter, test lights, and systematic troubleshooting methods., • Strong mechanical aptitude and experience with precision measurement, drilling, fastening, sealing, fit-up, and component installation., • Working fabrication skills; ability to safely use common metalworking and power tools. Welding capability is strongly preferred for senior-level candidates., • Ability to read and follow drawings, electrical schematics, work instructions, build specifications, and quality checklists., • A consistent record of safe work, reliable attendance, careful workmanship, and personal accountability., • Valid driver’s license and the ability to safely operate company and customer vehicles., • High school diploma or equivalent; relevant trade-school, military, or apprenticeship training is valued.Highly preferred, • Direct experience completing Type I, Type III, or medium-duty ambulance remounts., • Experience with ambulance multiplex systems, warning-light systems, HVAC, shore power, oxygen/suction systems, or Ford commercial chassis., • Aluminum and/or steel MIG or TIG welding experience., • Emergency Vehicle Technician (EVT), ASE, HVAC/refrigerant, OEM, welding, or related certifications., • Experience with Ford QVM processes, NFPA 1917, CAAS Ground Vehicle Standards, or structured vehicle quality-control systems., • Ability to lead a work cell, mentor teammates, or independently own a remount through completion.How success will be measured, • Safe work with full adherence to lifting, electrical, fabrication, and shop procedures., • Quality at the source: work passes inspection with minimal defects, rework, or comeback repairs., • Productivity against planned labor hours and committed delivery dates., • Accurate work-order documentation, parts accountability, and timely escalation of issues., • Team contribution, reliability, and care for customer vehicles and company equipment.Physical and work requirements This is a hands-on shop role. The employee must be able to stand, bend, kneel, climb, reach, and work in and around vehicle interiors for extended periods; safely use ladders, lifts, hoists, welding and fabrication equipment, hand tools, and power tools; and lift or move up to 50 pounds independently and heavier components with assistance or mechanical equipment. Appropriate personal protective equipment is required. Reasonable accommodations will be considered in accordance with applicable law. Compensation, benefits, and relocation COMPENSATION PACKAGE Hourly pay: $24–$55, based on directly relevant skills and experience. Overtime: Due to strong customer demand and a growing backlog, overtime is expected to remain available for the foreseeable future. Benefits: Medical, dental, vision, 401(k), paid time off, and paid holidays. Relocation: Assistance is available for highly qualified candidates and may include travel, temporary lodging, and moving reimbursement, subject to a written offer, successful completion of applicable background checks, and company policy. Equal employment opportunity VCI Emergency Vehicle Specialists is an equal opportunity employer. Employment decisions are made without unlawful discrimination on the basis of any status protected by applicable federal, state, or local law. This description summarizes the role’s primary responsibilities and is not intended to list every duty. Responsibilities may change based on business needs.

Job DescriptionHVAC/R Service Manager HVAC/R Service Managers oversee daily area operations, lead field teams, and ensure Helios consistently meets customer expectations and service-level agreements (SLAs). This is a hands-on leadership role that requires a strong presence in the field, working directly with technicians and Field Supervisors to support service calls, resolve technical challenges, improve performance, and maintain high standards of service quality and safety. In addition to field responsibilities, the Service Manager oversees administrative functions, including reporting, scheduling coordination, performance management, documentation, and operational planning. The Service Manager reports to the Regional Director of Operations and manages Field Supervisors and Service Technicians, with team size varying by state. What Sets Helios Apart Health benefits start DAY ONE, including an employee-only ZERO-cost option 401(k) with company match Generous PTO policy in addition to paid holidays Career growth opportunities and a promote-from-within culture Incentive, bonus, and employee recognition programs Company vehicle, fuel card, smartphone, and uniforms Continuing education and professional development through Helios University What Helios Needs From You Field Leadership and Technician Support Maintain a consistent presence in the field, regularly visiting job sites and working alongside technicians to understand operational challenges and support service delivery. Conduct field visits, ride-alongs, and job-site observations to evaluate technician performance, reinforce service standards, and identify opportunities for improvement. Provide hands-on technical guidance and assist technicians with troubleshooting complex HVAC/R systems, diagnosing problems, and resolving service issues. Coach, mentor, and develop Field Supervisors and Technicians to improve technical capabilities, productivity, professionalism, and customer satisfaction. Ensure technicians follow company procedures, safety requirements, and established quality standards. Assist with escalated customer concerns and challenging service calls to ensure timely, effective resolution. Team Management and Development Lead, supervise, and hold Field Supervisors and Technicians accountable for performance, productivity, attendance, and compliance with company expectations. Maintain clear and consistent communication across field teams, dispatch, customers, and leadership. Participate in recruiting, interviewing, hiring, onboarding, and training field personnel. Identify skill gaps and training needs, coordinate appropriate development opportunities, and support ongoing technician growth. Foster a culture of accountability, teamwork, professionalism, and continuous improvement. Administrative and Operational Responsibilities Complete required administrative duties, including service reports, performance documentation, operational reporting, and employee records. Coordinate with dispatch and field personnel to support scheduling, workload distribution, service coverage, and timely completion of customer work. Monitor service-level agreements, response times, work-order completion, technician productivity, and overall service performance. Review service documentation and ensure accurate, timely completion of work orders and required system updates. Manage or oversee the availability and appropriate use of parts, tools, equipment, safety supplies, and company vehicles. Assist with inventory control, purchasing coordination, and resource planning to minimize downtime and maintain operational efficiency. Partner with the Regional Director of Operations to review performance metrics, address operational gaps, and execute improvement plans. Balance time in the field with administrative responsibilities to ensure both technicians and the overall operation receive the support needed to succeed. What Sets You Apart 5+ years of hands-on HVAC/R field experience. Previous experience in HVAC/R service management or field leadership. Universal EPA certification. Valid driver's license and ability to travel regularly to job sites and customer locations within the assigned area. Advanced knowledge of air conditioning, refrigeration, heating systems, troubleshooting, and service practices. Demonstrated ability to diagnose technical issues, guide technicians, and resolve complex field challenges. Strong leadership, coaching, communication, and interpersonal skills. Ability to manage competing priorities and balance field responsibilities with administrative and operational demands. Basic computer proficiency, including the use of an iPad, smartphone, and service-management systems for communication, reporting, and documentation. Strong organizational skills, attention to detail, and a commitment to safety, quality, and customer satisfaction. Compensation Helios determines compensation based on labor market conditions across several U.S. geographic markets. The base salary for this position ranges from $95,000 to $105,000 annually. Compensation is determined by factors including geographic location, job-related knowledge, skills, and experience. Equal Employment Opportunity Helios is an equal opportunity employer. The company provides equal employment opportunities to qualified individuals without regard to race, color, creed, religion, sex, national origin, age, disability, medical condition, genetic characteristics, veteran status, citizenship, ancestry, marital status, gender, or any other characteristic protected by applicable federal, state, or local law. This policy applies to all terms, conditions, and privileges of employment. #LI-JM3

Job Description At PEARCE, we've got a career for you! Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit http://www.pearce-services.com. Your Impact Pearce is seeking Experienced HVAC Technicians to join our team for servicing and repairing commercial HVAC equipment on telecom shelters located on Cell Tower sites. This is a fast-paced and rewarding job that is best suited for individuals who are responsible, self-directed, highly motivated, willing to travel, and looking to learn and grow in the Telecom industry. This is a regional position. Candidates should reside 60 miles of the East Rutherford, New Jersey area. Core Responsibilities • Maintaining cooling systems – diagnosing, troubleshooting, repairing, or installing and replacing components of entire systems., • Conducting performance checks and regular maintenance on HVAC equipment., • Performing additional maintenance or upgrades to out-of-season HVAC equipment., • Responding to service calls in a timely manner, including emergency call out services., • Timely and accurate completion of daily work reports., • Operate and maintain a motor vehicle safely and legally per the PEARCE Employee Handbook and insurance requirements. Specific duties may vary or evolve over time based on business and client needs. Core Experience • Must be Level 2 or Universal EPA Certified (Required)., • 3+ years of experience with HVAC maintenance (commercial preferred)., • Basic knowledge of electronic, mechanical, and electrical components including refrigeration systems is preferred., • Must be able to communicate effectively both verbally and by email. Physical/Work Environment At Pearce safety is our number one concern. Candidates must be able to comply with OSHAFCC/FAA/EPA Standards. • Candidates should reside 60 miles of the East Rutherford, New Jersey area., • Must be available for after-hours and weekend call outs on occasion., • Extensive daily travel in an independent work structure., • Occasional overnights required-company pays all travel costs and provides per diem., • Driving to remote work sites as needed., • Be exposed to ambient temperatures while working outdoors., • Lift and move equipment as needed (up to 50 pounds)., • Will be required to pass a Department of Transportation (DOT) physical. Compensation: $30.00-$40.00 hourly/DOE At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range $30—$40 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Learn more about us at www.Pearce-Services.com!

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Health insurance Please do not call the office regarding this position. All applications must go through Indeed. About Us Lightning Mechanical is a trusted HVAC contractor serving New Jersey and the greater Tri-State area since 2005. We specialize in commercial, industrial, and multi-tenant HVAC services. Our expertise spans repair, maintenance, installation, and custom sheet metal fabrication. We provide factory-trained service, installation, and maintenance for Daikin VRV and Applied systems, along with many other VRF manufacturers — setting us apart as a leader in the region. We are positioned for continued growth and are seeking a senior-level Estimator who can play a critical role in driving profitability and ensuring accurate project forecasting. Position Summary The Senior HVAC Estimator will be a key contributor to Lightning Mechanical’s growth strategy. This individual will be responsible not only for preparing accurate bids but also for shaping the company’s estimating processes, guiding project selection, and contributing to overall business development strategy. This is a high-impact role suited for a seasoned professional with the expertise to influence margins and secure profitable work for a growing company. Responsibilities • Lead the full estimating process for commercial and industrial HVAC projects, from review of specs/drawings to final bid submission., • Develop detailed cost breakdowns including labor, equipment, subcontractors, and materials., • Partner with leadership to evaluate project opportunities, ensuring bids align with strategic growth objectives., • Provide value engineering solutions to keep bids competitive without compromising quality., • Build and maintain strong vendor and subcontractor networks to secure competitive pricing., • Standardize and improve estimating procedures and tools to drive efficiency and consistency., • Support business development by providing pricing insights and participating in client-facing discussions as needed., • Assist with AIA billing and project documentation as required. Qualifications • Minimum 10 years of experience in HVAC estimating, with a proven track record in commercial and industrial projects., • Strong understanding of HVAC systems, equipment, and construction practices., • Familiarity with AIA billing processes (preferred)., • Demonstrated ability to influence project selection and contribute to profitability strategies., • Proficiency in estimating software and Microsoft Office Suite., • Excellent communication and negotiation skills, with the ability to work cross-functionally with leadership, PMs, and clients., • Highly organized, detail-oriented, and comfortable working in a fast-paced environment. Compensation & Benefits • Competitive salary: $110,000 – $150,000 per year, commensurate with experience., • Health, dental, and vision insurance options., • 401(k) retirement plan., • Paid time off and holidays., • Career growth opportunities in a company on track for continued expansion.

Job Description Service Technician – Direct Residential Thermal Diagnostics, Technical System Maintenance, and Customer Care Job Overview • Company: Uncle Mike's Home Service LLC., • Salary/Pay Rate: $25.00 to $35.00 per hour (Plus Performance Bonuses and Incentive Pay)., • Location: Lincroft, NJ., • Job/Employment Type: Full-Time., • Schedule: Monday to Friday (With weekend availability as needed)., • Mandatory Licences & Certifications: Valid Driver's License and EPA 608 Certification. The Opportunity You will serve as a premier residential specialist, executing critical thermal diagnostics and equipment maintenance across a high-density consumer market. This role provides the operational autonomy to manage your daily dispatch schedule while serving as the authoritative technical consultant for local homeowners. You will directly drive regional client retention and brand trust, backed by a stable firm that combines small-business heart with enterprise benefits. How You Will Make An Impact • Perform advanced physical diagnostics, mechanical repairs, and custom preventative maintenance on residential HVAC units., • Communicate technical malfunctions and structural repair paths clearly to property owners to build absolute trust., • Conduct microscopic component assessments and capture exact airflow, refrigeration, and electrical performance readings., • Execute seasonal technical tune-ups and complex diagnostic service evaluations across diverse heating and cooling configurations., • Catalog comprehensive field service findings, technical recommendations, and part requirements within the corporate database., • Manage, inventory, and secure company-issued testing instrumentation, trade tools, and your assigned service vehicle., • Enforce rigorous environmental safety protocols, handling chemical refrigerants strictly according to regulatory frameworks. Required Qualifications & Experience • Minimum of 3 years of verified field experience specializing in residential HVAC service and mechanical systems., • Active, non-expired EPA 608 Certification necessary to handle and recover regulated consumer refrigerants., • Valid driver’s license maintained in good standing to accommodate responsive residential territory travel., • Proven troubleshooting capabilities with the capacity to isolate intricate electrical and mechanical system failures independently., • Advanced personal communication skills and a meticulous, clean demeanor while operating inside client residences. Preferred Qualifications & Experience • Completed technical degree in HVAC-R technology, mechanical engineering, or a recognized vocational apprenticeship., • Hands-on familiarity with modern high-efficiency heat pumps, ductless mini-split arrays, and smart control interfaces., • Completed safety milestones including an active OSHA 10 card or specialized residential gas safety credentials. Compensation & Benefits • Competitive hourly compensation ranging from $25.00 to $35.00 scaled to residential mechanical troubleshooting mastery., • Robust financial incentives including immediate access to performance bonuses, incentive pay, and corporate referral rewards., • Stable financial infrastructure featuring a dependable weekly pay cycle and a comprehensive retirement savings program., • Elite health protection architecture including premium medical, dental, vision insurance, and a Health Savings Account., • Full group safety allocations covering flexible life insurance policies, disability protection options, and wellness programs., • Substantial paid leave benefits encompassing traditional vacation allotments, observed holidays, sick leave, and parental leave., • Provided corporate service vehicle, commercial gas privileges, complete field uniforms, and required protective safety equipment., • Fully funded technical professional development, ongoing product certifications, and interactive employee reward contests. About Us Uncle Mike's Home Service LLC is a premier residential mechanical contractor specializing in high-performance heating, ventilation, and air conditioning solutions. We maintain a family-oriented workplace culture built upon technical craftsmanship, clear communications, and uncompromised client care. Our leadership treats workforce satisfaction as a central pillar, providing our technicians with modern diagnostic tools, steady year-round hours, and an engaging environment. Uncle Mike's Home Service LLC is an Equal Opportunity Employer and does not discriminate on the basis of race, color, religion, sex (including pregnancy, gender expression, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or any other status protected by law or regulations. It is our intention that all qualified applicants be given equal opportunity and that selection decisions be based on job-related factors.

Job Description Job Description Job Title: Controls Technician/ Electrician Company Information Our company was established in 1984 as an HVAC service company. We have grown into one of the largest mechanical contractors in NJ servicing large commercial and industrial buildings consisting of chiller plants, built-up penthouses and large HVAC equipment. We believe all customer interactions should be executed with the highest level of professionalism, excellence and competency at all levels of the organization. Minimum Requirements Experienced controls technician with a minimum of 5 years experience with a strong background in installation, commissioning, troubleshooting, repairing and maintaining building automation control systems and devices. Applicant must be able to follow wiring diagrams and engineering specifications to install and troubleshoot. Responsibilities: • Low voltage wiring, installation, termination of building automation controllers and end-devices., • Testing, commissioning and calibration of sensors, valves, dampers, etc., • Troubleshooting and programming of VFD’s., • Programming of application specific controls such as VAV boxes and fan coils., • Installation of MSTP and IP networks., • Be part of the on-call rotation, • Provide onsite installation and repair of controls systems Experience preferred in the following: • Tridium Jace, • Johnson FX, • BACnet IP, MSTP networks, • RTU, Chiller Plants, Boilers VAV boxes sequence of operations, • Microsoft Visio Required skills and strengths: • Valid drivers license, • HVAC building automation knowledge, • Must be able to perform the physical requirement of the job, • Basic computer skills of Excel, Word, and Outlook., • Five years experience with the installation and troubleshooting of building automations systems, • Communication skills (oral and writing), • Able to read wiring diagrams and engineers drawings, • Able to work in a fast-paced environment, • Able to multi-task and focus amid distractions, • Good listener and a team player, • Detail oriented, • Organized, flexible and follow directions, • Able to work overtime when needed, • Work independently Job Type: Full-time

Job Description Position Overview We are currently seeking a skilled HVAC Technician with strong commercial experience to join our growing team. In this role, you will be responsible for the installation, maintenance, troubleshooting, and repair of heating, ventilation, air conditioning, and refrigeration systems in commercial buildings. The ideal candidate is reliable, safety-focused, and has hands-on experience with a variety of HVAC systems used in office buildings, retail spaces, schools, and other commercial facilities. Key Responsibilities Install, inspect, and repair commercial HVAC systems, including rooftop units, split systems, chillers, boilers, VAV systems, and ductwork. Perform preventative maintenance tasks according to established schedules and equipment specifications. Diagnose and troubleshoot mechanical and electrical issues in HVAC systems. Ensure all work complies with local, state, and federal codes, as well as company and safety standards. Maintain accurate service records, work orders, and equipment documentation. Communicate effectively with clients, supervisors, and other team members regarding service updates and repair recommendations. Assist in startup and commissioning of new systems and equipment. Respond to emergency service calls in a timely and professional manner. Maintain tools, equipment, and company vehicles in safe and proper working condition. Qualifications High school diploma or GED required; technical or trade school certification in HVAC is preferred. 3+ years of experience as an HVAC technician in commercial environments. EPA Section 608 Certification required. Valid driver's license with a clean driving record. Strong knowledge of HVAC systems, controls, refrigeration cycles, and associated components. Ability to read and interpret blueprints, technical diagrams, and service manuals. Familiarity with digital HVAC tools and software is a plus. Excellent troubleshooting skills and attention to detail. Ability to work independently and as part of a team in a fast-paced environment. Must be able to lift up to 50 lbs, work at heights, and in confined spaces when needed. Benefits Competitive hourly wage based on experience Health, dental, and vision insurance 401(k) with company match Paid time off and holidays Opportunities for training, certifications, and career advancement Company vehicle and tools provided (where applicable)

Job DescriptionBenefits: • Competitive salary, • Free uniforms, • Paid time off We are looking for a skilled and experienced technician to join our team! HVAC/R Technicians install, maintain, repair and overhaul various types of equipment, including refrigeration systems, heating and cooling systems, and commercial kitchen equipment. A team player who is comfortable working independently, loves the feeling of a job well done, and takes pride in completing customer jobs with efficiency. A positive attitude is a must! Responsibilities: • Perform preventative maintenance, corrective maintenance and installation of refrigeration, heating, air conditioning, and ventilation and plumbing applications., • Install, maintain, and repair package units, split systems, boilers and other mechanical equipment., • Install, repair, and maintain light commercial rooftop units, boilers, controls, and other mechanical equipment., • Maintain all ventilation systems including preventative maintenance tasks and rebuilding of equipment when need., • Perform repairs and installation on HVAC/R equipment and commercial kitchen equipment for residential and commercial customers., • Perform maintenance and repair of HVAC/R equipment for commercial and residential applications including commercial refrigeration equipment., • Demonstrate strong knowledge of refrigeration systems, walk in refrigeration/freezer units and some experience on centrifugal and rotary screw compressor chillers., • Validate laboratory air flows to meet OSHA safety requirements., • Conduct a wide range of repairs in accord with OSHA regulations., • Plumb and connect all necessary PVC piping to drain condensation from the evaporative coil., • solder, pipe-fitting, blue print reading, climbing ladders, digging ditches, preparing pipes and fittings, cleaning, • Work on motor controls, pneumatic controls, chillers, high pressure steam, pumps, valves, piping, etc., • Service residential and commercial plumbing equipment., • Perform minor electrical and plumbing repairs., • Replace and repair malfunctioned/defective HVAC equipment, troubleshoot electrical components and wiring. Qualifications: • Past experience as an HVAC service technician, • Refrigeration experience, • Valid Drivers License, • EPA Certification, • Experience with operation and maintenance of chillers, heat pumps, air handlers, and geothermal systems, • Ability to climb ladders, crawl, and lift 40 pounds, • Ability to work after hours, over weekends and on public holidays with short or no notice, • Ability to work in confined spaces, • Excellent written, verbal and interpersonal skills, • Reliable mode of transportation

Job Description Job Title: Commercial HVAC Service Technician Job Location: Edison NJ Operating Company: Energy Transfer Solutions Pay Transparency: $35 to $55 Hourly FLSA Status: Non-Exempt Sign on bonus offered About: Under the guidance of the Service General Manager, the Commercial HVAC Service Technician plays a key role in delivering top-tier service to our customers by expertly installing, servicing, and starting up a wide range of HVAC systems. From first-time installations to diagnosing and repairing complex issues, you’ll be the go-to problem solver our customers count on. Energy Transfer Solutions - A member of the AIR Control Concepts family. Overview: Energy Transfer Solutions is your trusted partner for innovative HVAC solutions. Since 2003, we’ve provided premier equipment, parts, controls, and services to commercial and industrial clients across PA, NJ, and DE. Our expert team delivers tailored solutions, from system design to turnkey installations, ensuring optimal performance and efficiency. With a focus on quality, integrity, and customer success, ETS is committed to enhancing your building's comfort, reliability, and value. Check out our website: Specialty HVAC Solutions, Parts & Services | ETS HVAC Essential Duties and Responsibilities: • Service, Troubleshooting & Optimization – Diagnose and resolve issues on a variety of commercial HVAC systems. Perform preventative maintenance and fine-tune system performance for energy efficiency and reliability., • Customer Relationship Management – Build and maintain strong client relationships by addressing service concerns, recommending improvements, and delivering high-quality communication and support., • Communication & Documentation – Coordinate with internal teams to ensure efficient scheduling and follow-up. Accurately complete service reports, work orders, and related documentation in a timely manner., • Training & Mentorship – Stay up to date through ongoing technical training. Serve as a resource and occasional mentor to junior technicians in the field., • Safety & Compliance – Follow all safety guidelines and regulatory requirements as outlined by OSHA, the company, and customer sites., • Emergency Response – Participate in the on-call rotation to provide after-hours support for urgent service needs., • Other Duties as Assigned – Contribute to the team and company by stepping in where neededExperience & Requirements:, • Minimum 3–5 years of commercial HVAC service experience with systems such as VRF, rooftop units, and packaged equipment., • OEM-specific training or certifications preferred., • Skilled in diagnostics, troubleshooting, and interpreting service manuals and schematics., • Strong communication and customer service skills with a professional, team-focused mindset., • Valid driver’s license with clean driving record;, • Physically capable of lifting heavy equipment, climbing ladders, and working in various field conditions, including rooftops and tight spaces., • Willingness to participate in an on-call rotation for emergency service coverage. Benefits: We offer a competitive and comprehensive benefits package, including: • Health & Wellness – Medical, dental, vision, and life insurance coverage to support your well-being., • Financial Security – 401(k) retirement plan with company match and short/long-term disability coverage., • Work-Life Balance – Paid time off (PTO), paid holidays, and an employee assistance program (EAP)., • Professional Development – Ongoing training opportunities and support for continuing education., • Company Perks – Uniforms, vehicle and phone (as applicable), and a supportive team environment that values your expertise. Equal Employment Opportunity Statement Energy Transfer Solutions is an Equal Opportunity Employer. We are committed to providing equal employment opportunities to all qualified applicants and employees without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other characteristic protected by applicable federal, state, or local law. Work Authorization and Visa Sponsorship Applicants must be legally authorized to work in the United States. At this time, Energy Transfer Solutions does not provide employment-based visa sponsorship for this position, either now or in the future. Powered by JazzHR scvfbdiHrL

Job DescriptionBenefits: • 401(k), • Health insurance, • Training & development Please do not call our office regarding this position. DAIKIN HVAC Repair Specialists We are a results-oriented company providing servicing, maintenance, and installation of HVAC systems since 2005. We have an extensive knowledge base with experience in servicing multiple brands and lines of equipment, including boilers, pumps, motors, frequency drives, water towers, and more. Our team is committed to giving you peace of mind by ensuring your investment stays up and running so you can enjoy peace of mind day after day. Lightning Mechanical provides factory-trained service, installation, and maintenance for Daikin VRV and Applied systems, as well as many other VRF manufacturers. Our cross-trained service and installation technicians using factory tools service the New York City metro area, which sets us apart from our competition. Benefits/Perks • Flexible Scheduling, • Competitive Compensation, • Career Advancement OpportunitiesJob Summary: We are looking for a skilled and experienced Commercial HVAC Technician to join our team! In this role, you will install, service, or repair heating and air conditioning systems in commercial establishments. VRV/VRF a PLUS! You have past experience in an HVAC service technician role and hold an EPA certification. A team player who is comfortable working independently, you love the feeling of a job well done and take pride in completing customer jobs with efficiency. A positive attitude is a must! Responsibilities: • Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, or refilling non-toxic refrigerants, • Extensive work with commercial HVAC systems, including chillers, rooftop units, and mechanical systems, • Troubleshoot, calibrate and adjust pilots, thermostats and burners, transformers, controls, relays, heaters, elements, switches and controls on electrical systems, • Use common tools of the HVAC trade in daily work (e.g. multimeter, refrigerant gauges, charging charts, hand tools etc.), • Ability to install, service, and repair water source heat pump systems, • Establish customer rapport to ensure the highest levels of satisfaction, • Ability to layout, fabricate, assemble, install, and maintain refrigerant piping systems, pipe supports, and fixtures in commercial and industrial settings, • Test pipe or tubing joints or connections for leaks, using a pressure gauge or soap-and-water solution, • Test electrical circuits or components for continuity, using electrical test equipment, • Repair or replace defective equipment, components, or wiringQualifications:, • 5-10 years experience as an HVAC service technician, • Valid Drivers License and clean driving record, • EPA Certification, • Experience with operation and maintenance of chillers, heat pumps, air handlers, and geothermal systems, • Ability to climb ladders, crawl, and lift 50 pounds

Job DescriptionHaddad Plumbing and Heating Inc. is seeking a HVAC Service Technician to join our team. The HVAC Service Technician will support the HVAC department by preforming preventative, corrective, and predictive maintenance, troubleshooting and service of commercial and industrial HVAC systems. HVAC Technician performs tests and analysis of data to assure the proper functioning of equipment and provides recommendations as appropriate. Essential Functions • Perform maintenance and service repairs, install new units or replace parts for existing units according to specifications., • Perform preventative maintenance and repair of commercial HVAC equipment as needed., • Inspect equipment and perform diagnostics on equipment to identify potential problems to prevent premature and unexpected breakdowns or callbacks., • Communicate with dispatch to ensure completion of scheduled job., • Responsible for delivery and removal of parts and equipment needed to complete service work., • Generate work orders that address deficiencies in need of correction., • Adhere to safety standards and protocols while performing all job duties., • Uses and maintains appropriate personal protective equipment (PPE) as prescribed by the company.Education, Qualities & Skills Required, • High school diploma or equivalent, • Must have OSHA 10 or 30, • 5 years of HVAC maintenance and repair experience., • Skilled at servicing heating, air conditioning, and ventilation equipment as well as related accessories., • Effective communication skills to communicate with customers and resolve customer issues, complaints, or concerns., • Be familiar with a wide range of equipment and troubleshooting techniques., • Ability to show up to work on time and commitment to performing high quality work, • Valid NJ Driver’s License with a clean driving record.Compensation $20 - $25 Hourly depending on experience Benefits Include: • Medical Insurance, • Dental Insurance, • Vision Insurance, • 401(k) Plan with Company Match, • Paid Time Off (PTO), • Paid Holidays, • Paid Vacation, • Opportunities for Career Growth and AdvancementPosition Type and Expected Hours of Work This is a full-time position, Monday – Friday 7:00 am – 3:30 pm and Saturdays as needed per job. About Haddad Plumbing and Heating Inc.: Haddad Plumbing and Heating Inc. is a Commercial Plumbing and HVAC company dedicated to: Providing premier workmanship and consistent delivery of reliable plumbing, heating and HVAC systems. We deliver expertise and professionalism in a competitive marketplace, using innovative techniques and tools to enhance productivity and efficiency, and meet crucial deadlines. Our ultimate goal is deliver better cost returns that will deliver greater value. When Haddad Plumbing & Heating Inc. is awarded a new construction project, our managers apply their expertise to present a comprehensive proposal that meets all requirements. Our in-house drafters then create technical designs and plans to be used by construction engineers. Project managers work closely with the general contractor and team of supervisors to ensure that the project remains on schedule without sacrificing quality work. Finally, our team of project managers with plumbing and HVAC supervisors coordinate when and how plumbing and HVAC systems are synergized and implemented. With all projects, our goal is to earn our clients’ trust to be their plumbing and HVAC contractor of choice, now and in the future. Our success is measured by achieving our clients’ vision and objectives for the project, but going above and beyond their expectations as guided by our core values. Here at Haddad Plumbing and Heating Inc., we earn this privilege with our clients by providing best-in-class service, value, and quality in every project. Powered by JazzHR HLhJ3GO9Gd

Job DescriptionBenefits: • Competitive salary, • Dental insurance, • Health insurance Benefits/Perks • Flexible Scheduling, • Competitive Compensation, • Career Advancement OpportunitiesJob Summary: We are looking for a skilled and experienced HVAC Technician to join our team! In this role, you will install, service, or repair heating and air conditioning systems in residences or commercial establishments. You have past experience in an HVAC service technician role and hold an EPA certification. A team player who is comfortable working independently, you love the feeling of a job well done and take pride in completing customer jobs with efficiency. A positive attitude is a must! Responsibilities: • Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, or refilling non-toxic refrigerants, • Establish customer rapport to ensure the highest levels of satisfaction, • Test pipe or tubing joints or connections for leaks, using a pressure gauge or soap-and-water solution, • Test electrical circuits or components for continuity, using electrical test equipment, • Repair or replace defective equipment, components, or wiring, • Complete service tickets/reports on each and every job.Qualifications:, • Past experience as an HVAC service technician or comparable education, • Valid Drivers License, • EPA Certification, • Experience with operation and maintenance of boilers, heat pumps, air handlers, and geothermal systems, • Commercial and residential experience preferred, • Ability to climb ladders, crawl, and lift 40 pounds

Job DescriptionHaddad Plumbing and Heating Inc. is seeking a HVAC Helper to join our team. The HVAC Helper will support the HVAC department by preforming Plumbing and HVAC work and assisting Plumbing / HVAC mechanics with daily tasks and projects Essential Functions • Assist with the Installation, repair and maintenance of all plumbing systems including but not limited to drainage, waste, vent, gas and flue piping, fixtures, faucets, tub & shower valves and water heaters., • Assist with the Installation, repair and maintenance of all HVAC systems including but not limited to hydronic boilers, steam boilers, hot air furnaces, air conditioning systems, piping, controls and ductwork., • Keep the mechanics vehicle organized, stocked with material and clean., • Review and complete assigned training curriculum., • Have hand tools as required by the company., • Wear PPE as established by the company guidelines, • Any other tasks as assigned managerEducation, Qualities & Skills required, • Must have a OSHA 10 or 30, • Organizational and multitasking abilities, • Active listener with excellent communication skills, • Sound judgment and critical thinking, • Professional behavior and conduct, • Must be able to work well individually and with a team.Compensation Starts at $17 Hourly with no experience Benefits Include: • Medical Insurance, • Dental Insurance, • Vision Insurance, • 401(k) Plan with Company Match, • Paid Time Off (PTO), • Paid Holidays, • Paid Vacation, • Opportunities for Career Growth and AdvancementPosition Type and Expected Hours of Work This is a full-time position, Monday – Friday 7:00 am – 3:30 pm and Saturdays as needed per job. About Haddad Plumbing and Heating Inc.: Haddad Plumbing and Heating Inc. is a Commercial Plumbing and HVAC company dedicated to: Providing premier workmanship and consistent delivery of reliable plumbing, heating and HVAC systems. We deliver expertise and professionalism in a competitive marketplace, using innovative techniques and tools to enhance productivity and efficiency, and meet crucial deadlines. Our ultimate goal is deliver better cost returns that will deliver greater value. When Haddad Plumbing & Heating Inc. is awarded a new construction project, our managers apply their expertise to present a comprehensive proposal that meets all requirements. Our in-house drafters then create technical designs and plans to be used by construction engineers. Project managers work closely with the general contractor and team of supervisors to ensure that the project remains on schedule without sacrificing quality work. Finally, our team of project managers with plumbing and HVAC supervisors coordinate when and how plumbing and HVAC systems are synergized and implemented. With all projects, our goal is to earn our clients’ trust to be their plumbing and HVAC contractor of choice, now and in the future. Our success is measured by achieving our clients’ vision and objectives for the project, but going above and beyond their expectations as guided by our core values. Here at Haddad Plumbing and Heating Inc., we earn this privilege with our clients by providing best-in-class service, value, and quality in every project. Powered by JazzHR SfXQfMiugy

Job Description Are you a Certified HVAC/Refrigeration Technician looking for a place to build your career - not just another job? We are looking a Journey Level Refrigeration Technician for full-time, year-round commercial service work in and around the Plainfield, NJ area. Looking for the right job is tough. Come join us, and you won't need to look again! We are seeking career-minded techs who are ready to start their last job and enjoy the work/life balance we offer for years to come! With full benefits, paid holiday/sick/vacation time, room for growth, and team that has your back, this is the place for you! Apply now! RESPONSIBILITIES: · Maintain, diagnose, and repair multiple types of refrigeration systems, as well as all mechanical and electrical components related to the equipment (such as self-contained coolers and freezers, single and rack systems, etc.) · Perform minor plumbing repairs on refrigeration equipment, including walk-in drain lines, case drain lines, cooling towers and water-cooled condensers · Inspect plumbing, electrical, and refrigeration systems and identifying specifications that are required · Perform preventative maintenance and repairs for HVAC and Refrigeration · Collaborate directly with grocery store managers and store directors · Quote equipment repairs and recommend replacement when necessary · Maintain proper van stock, tools and safety equipment on work van SKILLS: · Good judgement for use of supplies and materials in refrigeration repairs · Attention to detail and critical analysis for diagnostics and work performed · Professional communication skills · Mechanical aptitude QUALIFICATIONS: · 2+ years prior HVAC/R experience · Be available for ON CALL work as needed · Ability to pass a physical/drug screen/background investigation/ driving abstract as needed BONUS POINTS: · Universal EPA License • Electrical License · 2-3 years of grocery refrigeration / HVAC experience · Related education/certification in HVAC and refrigeration industry It's time you take the first step into your last job! If you're done wasting time in the wrong place, apply now!

Job Description Commercial HVAC Field Service Specialist Picture your workday: you review your first dispatch over coffee, load up your tools, and head to a customer site in New Jersey. By mid-morning, you’re commissioning a rooftop packaged unit. After lunch, you diagnose a humidity control issue on a water-source heat pump. Before you wrap, you fine-tune an energy management sequence and document your findings for the customer. That’s a typical day in this role—hands-on startup and service across commercial heating, cooling, ventilation, humidity control, and energy management systems. What you’ll take on • Start up, commission, and service commercial HVAC systems, including rooftop packaged units and water-source heat pumps., • Troubleshoot and repair issues across air-conditioning, heating, ventilation, humidity control, and energy management applications., • Communicate clearly with customers and internal teams; provide organized service reports and recommendations., • Operate independently in the field while staying dependable, timely, and safety-minded., • Mentor less-experienced technicians and support on-the-job learning. Who you are, • Experienced: 5+ years of commercial HVAC field experience (startup/commissioning included)., • Knowledgeable in commercial A/C and heating, water-source heat pumps, and rooftop packaged HVAC systems., • A self-starter with excellent communication and strong organizational habits; reliably on time., • Equipped with your own hand tools and a clean driving record., • Certified: EPA Universal (required); OSHA 30 preferred. We’re growing our service business in the NJ area and are hiring both seasoned pros and entry-level technicians eager to learn. If you’re early in your career, you’ll have opportunities to develop under mentorship. Where you’ll work Field-based across our New Jersey service territory. Compensation Estimated salary: $35/hour – $55/hour, based on experience and skills, plus benefits.

Job DescriptionCompany Description Uncommon Schools is a nonprofit network of high-performing public charter schools dedicated to providing an exceptional K-12 education in economically disadvantaged communities. Operating in Boston, Camden, New York City, Newark, and Rochester, we are committed to closing the college completion gap and preparing every student for college and beyond. Our students consistently exceed national benchmarks, reflecting our dedication to their success. We invest deeply in our educators, offering weekly coaching, feedback, and professional development to ensure excellence in teaching and leadership. Join us to work hard, do good, and make a lasting difference! Job Description Uncommon Schools is seeking a Senior HVAC Technician (Snr HVAC Tech) to join the charter network’s New Jersey Facilities team. This position provides an opportunity for an experienced HVAC technician with at least seven (7) years' relevant experience to work with a dedicated facilities group, deepen his/her technical skills, and help ensure that Uncommon provides well-maintained, comfortable, and safe educational facilities for our students and staff. Uncommon’s portfolio in New Jersey comprises buildings constructed from the very early 1900s through the early 2020s, operating HVAC systems dating from 1966 to the recent past few years. As ambient comfort is essential to a productive learning and teaching environment, the impact of this individual’s attentiveness will be felt and deeply appreciated across the region. Reporting to the Senior Manager, Facilities Management Team, the Senior HVAC Technician will perform all technical work necessary to inspect, maintain, repair, and modify HVAC system in our buildings. With expertise in HVAC – and to a lesser extent in construction and plumbing – in multi-family, schools, and commercial buildings, the successful candidate will be responsible for conducting minor HVAC projects and managing larger ones and ensuring they are completed on time and within budget. The Snr HVAC Tech will partner with senior Facilities team members and outside consultants on the planning, coordination, and supervision of mechanical construction and repair activities implemented by outside vendors, will ensure project timelines are met and ensure quality control standards are followed, mentor junior staff, and handle all HVAC-related communication with stakeholders. Uncommon values candidates who have the drive and ability to work hard, are highly self-motivated, are eager to take on and implement assignments and projects, and have a strong commitment to customer service and satisfaction. Safe, efficient, healthy, clean, comfortable, and reliable buildings are essential to Uncommon’s mission to deliver an excellent education to our students and a comfortable working environment to our dedicated staff. As a member of the NJ Facilities Team, the Senior HVAC Technician will • maintain current knowledge of the National Standard HVAC Code and other applicable building codes and perform all facets of the HVAC trade in accordance with those codes and in a safe and effective manner, • diagnose problems with HVAC systems, evaluate solutions to remedy issues, and provide sound recommendations to supervisors, • in emergency situations take immediate steps to contain the problem and restore the system to sound working condition, • in emergency situations maintain clear and consistent communication with stakeholders to apprise them of steps being taken to address the issue, • troubleshoot and repair all HVAC type systems currently available in the market, • maintain records of corrective and preventive work assignments received through an automated work order system (currently SchoolDude, soon ZenDesk), • assist onsite Facilities Managers and General Maintenance Workers with work projects or special assignments, • respond to campus emergency calls after hours as needed, • perform other duties as assignedQualifications Required Technical Skills: • Significant journeyman-level HVAC experience along with the trade knowledge to effectively understand and perform all facets of the HVAC trade in accordance with the National Standard Plumbing Code and other applicable codes, • Strong background in commercial heating projects large and small, including hot water boilers and gas furnaces, • Ability to read as-built plans for all buildings in portfolio, • Ability to read and interpret construction drawings, specifications, submittals, cut sheets, layouts, technical manuals, schematic drawings, and other HVAC-related trade documents, • Advanced knowledge of BMS systems and system operations, • Ability to procure replacement parts as needed to make all necessary repairs, • Ability to properly and safely use the tools of the trade and carry out all tasks expected of a Snr. HVAC Technician, • Ability to troubleshoot and repair refrigerant-driven cooling and heating equipment (heat pump systems), • Ability to troubleshoot and repair water-driven heating and cooling equipment, • Ability to troubleshoot and repair water or glycol pump systems, • Ability to troubleshoot and service chillers and cooling towers, • Ability to change filters and belts and clean coils as needed to ensure proper functioning of units, • Ability to troubleshoot and implement recommended repair/replacement of, • gas valves, • economizer motors and dampers, • compressors and contactors, • dampers, • chilled water and hot water pumps, • glycol injection units, • Ability to evacuate and top-off units with refrigerant General Technical Skills • Bachelor’s Degree equivalent or seven plus (7+) years of experience in the HVAC field, • Evidence of progressive responsibility and experience in HVAC field, with four plus (4+) years as head technician, • Ability to handle multiple projects simultaneously, • Familiarity with key building systems (HVAC, electrical, mechanical, plumbing), • Familiarity with OSHA and other Life Safety codes, etc., • Computer skills necessary to operate BMS system, • Facility with Microsoft office suite, • Strong organizational skills, attention to detail, and follow-through, • Ability to communicate effectively verbally and electronically with facilities staff, school staff, and vendors, • Available to work nights and weekends when necessary, • Extreme flexibility, with a strong work ethic and an entrepreneurial spirit to accommodate high level of responsibility and multiple priorities, • New Jersey low pressure black seal boiler, HVAC or other certificate, training, or licenses a plus, • Carry a current EPA card enabling technician to dispense of refrigerants, • Valid driver’s license and vehicle, • Strong capacity to operate independently Physical Requirements The physical requirements outlined below are representative of those that must be met by an employee to successfully perform the essential functions of this position. • Stand or walk for up to two (2) hours at one time, up to eight (8) hours per day, • Sit for fewer than two (2) hours during an eight (8)-hour day, • Lift or carry up to 35 pounds frequently and 100 pounds occasionally, • Lift up to 100 pounds to waist height and up to 35 pounds in a range of motions from floor to overhead, • Frequently use hands for simple grasping, fine manipulation, pushing or pulling, • Occasionally climb stairs or ladders, dig, or pull with forces up to 100 pounds, • Frequently bend, squat, kneel, knee stand, lift overhead, reach overhead, push, or pull, • Work outdoors in a variety of temperatures and environmental conditions, • Possess ability to work at heights, full range of body motions and physical agility, and ability to maintain balance Mission Alignment • Demonstrate a relentless drive to improve the minds and lives of students in and out of school, • Demonstrate a commitment to the schools’ rules, regulations, and safety procedures, • Implement and enhance the school’s systems and culture Create high accountability for oneself as well as for building staff and vendors #ZR Additional Information Our people are what make us Uncommon. We offer competitive compensation and comprehensive benefits that support the personal health, wellness, and finances of our staff and their families. Our compensation philosophy values equity & fairness and attracting & retaining top talent. Compensation Compensation for this role is between $43/hr to $50/hr. Starting pay is determined using various factors including but not limited to relevant professional experience, education, certifications, and tenure with Uncommon Schools. Benefits • Regional staff will have the same holidays and sustainability days as school-based staff in their region, and flexible summer PTO, • Extensive, best-in-class training and development, • Comprehensive health, dental, and vision insurance plans + pre-tax flexible spending (FSA), dependent care (DCFSA), and health saving accounts (HSA), • Financial Planning, • New Jersey Pension program, • Paid leave of absence options (parental, medical, disability, etc.), • Mental health and counseling support + wellness benefits *A detailed list of all benefits is located HERE. At Uncommon, we believe that a supportive and welcoming environment helps our students, staff, and community thrive. We are dedicated to building a team that brings a wide range of perspectives and experiences, reflective of the communities we serve---with over 70% of our staff identifying as people of color. Our organization values respect and open dialogue on important topics that shape our school culture. As an equal opportunity employer, Uncommon provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. We also ensure that individuals with disabilities receive all privileges and benefits associated with employment and are provided reasonable accommodations for the interview process and to perform core job functions. If you would like to request an accommodation, please email recruitment@uncommonschools.org.

Job Description About Mantis We help organizations improve how their buildings perform by bringing together energy, facility operations, and sustainability into one connected approach. At Mantis, our teams work across the full lifecycle of a facility—from planning and design to field execution and long-term asset management—across commercial and industrial portfolios, data centers, and complex mechanical systems. Our work spans four core areas: Building Controls, Energy Efficiency, Energy Advisory, and Facility Management—covering HVAC/mechanical optimization, BMS/BAS and EPMS controls, lighting system upgrades, energy brokerage, roofing and building envelope assessments, construction management, and more. Whether you’re in sales, engineering, construction/project management, field operations, corporate, or technology, you’ll play a role in delivering these solutions and helping clients improve facility performance. Summary BMS Service Technician II diagnoses and resolves complex system issues in building management systems across commercial and mission-critical environments. This role ensures systems run reliably by completing service work from start to finish, reducing repeat issues, and maintaining consistent service quality. This role requires overnight travel for service projects.Responsibilities • Independently troubleshoot, service, and commission BMS systems in mission-critical environments., • Diagnose and resolve hardware, software, and networked control system issues., • Execute service tickets from assignment through full resolution within SLA timelines., • Perform system upgrades, backups, restores, and configuration changes., • Execute commissioning and startup activities, including validation of system performance., • Install and configure control system components, including sensors, controllers, and panels., • Read and interpret control drawings to identify issues and implement solutions.Minimum Qualifications, • 3-5+ years of BMS, building automation, or HVAC controls experience, • Proficiency with Tridium Niagara (N4) or equivalent controls systems, • Strong troubleshooting capability across control systems (hardware, software, and networked systems)Working Conditions/Physical Requirements Work environment:, • Field-based role across commercial buildings, active construction sites, and mission-critical facilities. Physical requirements:, • Standing, walking, climbing ladders, and working in mechanical spaces, • Lifting tools and equipment (up to ~50 lbs.), • Working in confined or high-access environments as needed Schedule expectations:, • Standard work hours with on-call rotation and emergency response requirements, • Travel required based on service and project needs Disclaimers This position description describes the general nature and level of work expected for this role. It is not intended to be a complete list of all duties, responsibilities, or qualifications. Responsibilities may change based on business needs, client demands, system changes, or economic conditions. Employees are expected to perform other job-related duties as assigned. Base Salary Note: Employees are held accountable for all duties of this job. This job description is not intended to be an exhaustive list of all duties, responsibilities, or qualifications associated with the position. What else can we offer you? We offer a fantastic lineup of benefits, including Medical, Dental, Vision, FSA, HSA, 401k Matching, Paid Vacation, Paid Sick, Paid Holidays, Paid Parental Leave, Paid Short Term & Long Term Disability, Tuition Reimbursement, and a flexible hybrid work schedule (for office-based employees). Working at Mantis also brings tremendous professional development opportunities that allow you to make a real impact on both the company and your career! Not sure you meet every single requirement? Studies show that women and individuals from underrepresented groups often hesitate to apply unless they check every box. At Mantis, we’re committed to building an inclusive and equitable team—so if this role excites you, we’d love to hear from you, even if your experience doesn’t match every single qualification. Mantis Innovation is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Job Title: Service Technician Job Type: Full-time Company Information Our company was established in 1984 as an HVAC service company. We have grown into one of the largest mechanical contractors in NJ servicing large commercial and industrial buildings consisting of chiller plants, built-up penthouses, and large HVAC equipment. We believe all customer interactions should be executed with the highest level of professionalism, excellence, and competency at all levels of the organization. We are looking for highly motivated, self-starter with ability to work with minimal supervision to join our growing team of HVAC professionals. Signing Bonus Based on Experience Qualifications: Minimum of 5 Years Experience • EPA Certified • Clean Driver's License This position is responsible for diagnosing & repairing HVAC system's, with accuracy and to the customer’s satisfaction. This position has working conditions that expose you to various weather conditions and require you to work outside normal working hours including evening, weekends, and holidays. Responsibilities Service technician is responsible for diagnosing and repairing HVAC systems, on time and to the customer’s satisfaction. This position has working conditions that expose you to various weather conditions and require you to work outside normal working hours including evening, weekends, and holidays, when necessary. · Maintain and repair heating, air conditioning, and ventilation systems consisting of various mechanical, duct, and piping systems. · Identify maintenance risks on equipment. · Diagnose electrical and mechanical faults for HVAC systems. · Clean, adjust and repair systems, and perform preventative maintenance. · Perform emergency repairs promptly and efficiently. · Site preparation & clean-up · Maintain a clean truck and job site. · Ensure compliance with code standards and system specifications. · Maintain regular attendance and willingness to work OT and weekends. · Work as a professional with clients, co-workers, and subcontractors Required skills and strengths: · A valid driver's license and a clean driving record · Proficient in reading schematics, wiring diagrams, and work plans. · Union Employee Preferred · Experience as an HVAC Service Technician · Ability to work staggered schedule · Must be able to perform the physical requirement of the job · Strong customer service and communication skills · Able to work in a fast-paced environment · Able to multi-task and focus amid distractions · Good listener and a team player · Detail oriented · Organized, flexible and follow directions · Hard-working and motivated Minimum Requirements · Must be able to lift a minimum of 75 lbs. · Must be able to climb ladders. · Must be able to endure walking, squatting, bending, balancing, climbing, kneeling, crawling and prolonged standing. · Ability to advise customers of potential issues and suggest upgrades to improve efficiency and indoor air quality products. · Follow instructions from supervisor and complete in a timely manner. · Work cooperatively with others. Work independently with little direction. · Interact with clients to ensure satisfaction.

Job Description Cooling Tower Service Technician - HVAC - Base Salary to 34.00/hour - Mountainside, NJ • Our client, an established commercial and industrial HVAC service provider, is seeking a Cooling Tower Service Technician to join their team in Mountainside, NJ., • This position focuses on preventive maintenance, mechanical troubleshooting, equipment repairs, and component replacements for commercial and industrial cooling towers and related mechanical systems. Candidates with experience in commercial HVAC service, industrial maintenance, mechanical equipment repair, or related field-service work are encouraged to apply., • The Cooling Tower Service Technician will perform routine maintenance and repairs with limited supervision while assisting senior technicians with cooling tower installations, equipment upgrades, and more complex mechanical service projects. Specialized manufacturer training will be provided. Responsibilities: • Perform preventive maintenance on commercial and industrial cooling towers, including cleaning, lubrication, oil changes, inspections, and mechanical adjustments., • Troubleshoot and diagnose mechanical issues involving pumps, electric motors, bearings, belts, pulleys, fans, valves, and piping systems., • Perform routine mechanical repairs, equipment servicing, and component replacements with limited supervision., • Assist with cooling tower installations, equipment upgrades, motor replacements, gearbox replacements, and major mechanical repairs according to manufacturer specifications., • Inspect mechanical equipment for wear, damage, vibration, component failures, and recommended corrective actions., • Assist senior technicians with advanced troubleshooting, mechanical equipment replacement, and complex field-service projects., • Support field-service crews during equipment repairs, installations, and multi-day maintenance projects., • Document preventive maintenance activities, service findings, equipment conditions, completed repairs, and recommended corrective actions., • Communicate equipment conditions, service findings, and project progress to supervisors and management., • Maintain service trucks, tools, mechanical equipment, and work areas., • Follow company safety procedures, applicable regulations, and equipment manufacturer requirements. Qualifications: • 2+ years of hands-on experience in commercial HVAC, mechanical service, industrial maintenance, field service, or a related skilled trade., • Experience performing preventive maintenance, mechanical troubleshooting, and routine equipment repairs with limited supervision., • Working knowledge of mechanical components, including pumps, motors, bearings, belts, pulleys, fans, valves, and piping systems., • Experience servicing commercial or industrial HVAC equipment, cooling towers, or related mechanical systems., • Experience identifying mechanical equipment failures and determining appropriate repair procedures., • High school diploma or GED with relevant technical training or trade experience., • Ability to read and interpret technical manuals, maintenance instructions, and safety documentation., • Basic computer skills, including Microsoft Word, Excel, and Outlook., • OSHA 30 certification or ability to obtain certification in accordance with company requirements., • Ability to perform job-related physical tasks, including traversing active work sites, working outdoors in varying weather conditions, accessing elevated structures, and using personnel lifts with appropriate safety equipment and training. Compensation: • Base salary (paid hourly) in the 30.00 - 34.00/hour range, • 100% employer-paid health insurance, • Profit sharing, • Annual bonus, • Overtime opportunities, • Paid time off (PTO), • Typical Monday–Friday schedule, • Potential rotating weekend approximately once per month, • Prevailing wage on applicable union projects #INDALL

Annual Salary: $60,000-65,000k plus commission The pay listed is the salary range for this position. Any specific offer will vary based on the successful applicant’s education, experience, skills, abilities, geographic location, and alignment with market data. You may be eligible to participate in a Company incentive or bonus program. Shift: Typical hours are Monday-Friday, 8:00am-5:00pm and Emergencies and Weekends as needed. Territory: This Area Manager position is 100% travel within area of State of New Jersey for site visits at banking facilities between various locations and emergencies (as needed). Benefit Information: ABM offers a comprehensive benefits package. For information about ABM’s benefits, visit _. Position Summary: The Area Manager is responsible for the day-to-day operation and administrative activities to ensure conformance to contract requirements. Develops and implements cost control measures and level of service standards to ensure compliance with customer specifications / contract requirements for assigned building. Oversees inspections, quality control measures, and the inventory control of equipment and supplies for the assigned building. This Area Manager position is 100% travel within area of the state of New Jersey for site visits at banking facilities between various locations and emergencies (as needed). • Ensure that services are performed as contracted and at the intended profit margins., • Troubleshoot potential problems and concerns., • Manage the company’s quality control monitoring and safety programs at the assigned buildings., • Conduct quality of service inspections at assigned buildings., • Attempt to increase revenue by ensuring the Supervisors are looking for ways to provide additional or periodic services to the customers., • Ensure compliance with company policies and procedures and all federal, state, and local government regulations., • Ensure that all paperwork, including terminations, labor variance action plans, and operational model is complete and accurate and is submitted to the district/hub in a timely manner., • Analyze and manage, in a proactive manner, both the financial and the operational performance of the assigned buildings., • Ensure that payroll is accurate and submitted to the appropriate payroll personnel in a timely manner and, when applicable, correct any payroll discrepancies., • Manages and provides leadership to Supervisors, and Lead personnel assigned to the buildings., • Responsible for the overall direction, coordination, and evaluation of personnel within the assigned building. Carry out supervisory responsibilities in accordance with the company’s policies and applicable laws., • Responsibilities include directing work; appraising performance; rewarding and disciplining employees; addressing complaints, resolving problems, and terminating employees., • Associates degree is preferred or equivalent experience is required., • Minimum of three (3) years of supervisory experience in a janitorial service oriented environment., • Experience in cost estimating/pricing work., • Have a working knowledge of OSHA safety regulations and chemical handling/storage procedures., • Must be able to write reports and business correspondence and effectively present information and respond to questions from managers and customers., • Must have a valid State issued driver’s license 100% travel within area of the state of New Jersey for site visits at banking facilities between various locations and emergencies (as needed). About Us ABM (NYSE: ABM) is one of the world’s largest providers of facility services and solutions. A driving force for a cleaner, healthier, and more sustainable world, ABM provides essential services and forward-looking performance solutions that improve the spaces and places that matter most. From curbside to rooftop, ABM’s comprehensive services include janitorial, engineering, parking, electrical and lighting, energy and electric vehicle charging infrastructure, HVAC and mechanical, landscape and turf, and mission critical solutions. ABM serves a wide range of industries – from commercial office buildings to universities, airports, hospitals, data centers, manufacturing plants and distribution centers, entertainment venues and more. Founded in 1909, ABM serves over 20,000 clients, with annualized revenue approaching $8 billion and more than 100,000 team members in 350+ offices throughout the United States, United Kingdom, Republic of Ireland, and other international locations. For more information, visit http://www.abm.com. ABM is proud to be an Equal Opportunity Employer qualified applicants without regard race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected factor under federal, state, or local law. ABM is committed to working with and providing reasonable accommodation to individuals with disabilities. If you have a disability and need assistance in completing the employment application, please call 888-328-8606. We will provide you with assistance and make a determination on your request for reasonable accommodation on a case-by-case basis. ABM participates in the U.S. Department of Homeland Security E-Verify program. E-Verify is an internet-based system used to electronically confirm employment eligibility. ABM is a military-friendly company proudly employing thousands of men and women who have served in the U.S. military. With ABM, you’ll have access to a world-class training program and ample opportunities to use the skills you developed while serving our country. Whether you’re looking for a frontline or professional position, you can find post-military career opportunities across ABM. ABM directs all applicants to apply at http://www.abm.com/ ABM does not accept unsolicited resumes.

Job Description HVAC Service Manager Highly respected Mechanical Contractor in Middlesex County seeks Service Manager: • 5+ years of HVAC Construction & Service experience, • Act as technical source for team, • Client interaction skills, • Select and order equipment, purchasing, • Dispatch, • Schedule labor and assist with payroll, • Assist with sales and estimates, • Service planning, • Invoicing, • Commercial and large retail project background desired Please send resume to Tony Gallagher, Liberty Personnel: #MechanicalGC #midsenior \nCompany Description Libertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move! Hundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month. Established in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on: Information Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists. Libertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move!\n\nHundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month.\n\nEstablished in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on:\n\nInformation Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.

Job Description A qualified technician typically earns between $75K - $200K. Pay is hourly, plus commission. As an experienced HVAC technician, you will perform maintenance, service, part replacements, & give estimates for repairs. Ability to evaluate customer’s homes for opportunities and inform clients about best options to meet their needs is required. Key attributes for this position include troubleshooting, being a team player, honesty, integrity and doing a great job for our customers. Work Hours: Mon- Fri 8am start time. End time & work hours will vary based upon scheduling needs and seasonal demand including some after hours and weekends. Pay Scale: Ranges between $75K and $200K depending on experience and performance, plus benefits. When you become part of the Bill Leary AC & Heating team, we offer: • Great Benefits - Medical / Dental / Vision Coverage, • Competitive Salary, • Commission – no caps on earning, • Earning Incentives, • Excellent Training Programs, • PTO, • Simple IRA, • Company vehicle, cell phone and iPad for on duty activities, • No out of pocket for fuel. Position Requirements: • HVAC experience, • 5+ years sales experience, • Goal orientated with a strong desire to succeed, • Strong sales skills, • Strong interpersonal & communication, listening skills, • Professional appearance, • Ability to use iPad and smart phone, • Valid driver's license, • Insurable by company insurance carrier, • Mandatory drug testing and background check prior to hire.\nCompany Description Bill Leary Air Conditioning & Heating is a family owned and operated business. The year 2026 marks our 37th year serving Middlesex County and the surrounding areas of Central New Jersey, Monmouth County, Somerset County, and Union County. We provide all levels of residential and commercial heating and air conditioning sales, design, engineering, installation, service, repair, and maintenance. Bill Leary Air Conditioning & Heating is fully insured, bonded, licensed and certified by the State of New Jersey Department of Building and Construction to work on their projects and the New Jersey Economic Development Authority to work on their public schools. We keep up-to-date with the most current codes, laws, and utility rebate procedures. Our firm has been selected and approved by The State of New Jersey Department of Building & Construction to perform work on jobs up to $15,000,000. Our completed and current jobs include: Universities Public Schools Municipal Buildings Police Stations And many other large and small commercial jobs Bill Leary Air Conditioning & Heating is a family owned and operated business. The year 2026 marks our 37th year serving Middlesex County and the surrounding areas of Central New Jersey, Monmouth County, Somerset County, and Union County.\n\nWe provide all levels of residential and commercial heating and air conditioning sales, design, engineering, installation, service, repair, and maintenance.\n\nBill Leary Air Conditioning & Heating is fully insured, bonded, licensed and certified by the State of New Jersey Department of Building and Construction to work on their projects and the New Jersey Economic Development Authority to work on their public schools. \n\nWe keep up-to-date with the most current codes, laws, and utility rebate procedures.\n\nOur firm has been selected and approved by The State of New Jersey Department of Building & Construction to perform work on jobs up to $15,000,000. Our completed and current jobs include:\n\nUniversities\nPublic Schools\nMunicipal Buildings\nPolice Stations\nAnd many other large and small commercial jobs

Job Description Our client is a ommercial and industrial boiler contractor serving building owners, property managers, hospitals, universities, manufacturers, and process facilities across New Jersey and the greater New York metropolitan area. Our work spans new boiler and boiler room installations, code repairs and alterations to pressure-retaining equipment, burner and controls retrofits, preventive maintenance agreements, emergency service, and efficiency upgrade projects. We are seeking a General Manager to take full operational and financial ownership of the business. This is a true P&L role. You will run service, construction, and shop operations day to day, own the numbers that ownership sees every month, protect and advance our code certifications, and build a durable leadership culture in a trade where skilled labor is scarce and loyalty is earned rather than bought. The right person is equal parts operator, financial thinker, and people leader — comfortable in a boiler room at 2 a.m. and in front of a spreadsheet the next morning. This role exists to professionalize how the business runs without breaking what already works. You will inherit experienced field technicians and long-standing customer relationships. Your job is to raise margin, tighten execution, and modernize systems while keeping the crew intact and the phone answered. Core Responsibilities Profit & Loss Ownership You own the P&L outright — top line, gross margin, overhead, and net. You will be accountable for annual budgeting, monthly forecasting, and the variance conversations that follow when actuals miss plan. • Build and defend the annual operating budget across every revenue line: service labor, preventive maintenance agreements, projects and retrofits, parts and equipment sales, rental, and shop work., • Own gross margin by division and by job. Understand where margin is made and where it leaks — mispriced service calls, unbilled work, warranty rework, unmanaged overtime, change orders never captured., • Manage work-in-progress and percentage-of-completion reporting on project work, including over/under billings, cost-to-complete accuracy, and backlog quality., • Drive cash performance: billing velocity, DSO, retainage recovery, unbilled revenue, and vendor terms., • Approve pricing, quoting standards, labor rates, and markup structures; make the call on which work is worth chasing and which is not. Financial Reporting & Analysis Produce the monthly financial package that ownership relies on to make decisions. This is not accounting support work — you are expected to build the reporting, interpret it, and act on it. • Assemble and present a monthly package including P&L with budget variance, gross margin by revenue line, backlog and WIP schedules, cash flow and aging, and KPI dashboards with commentary on what moved and why., • Build the operating metrics that run the business: technician billable utilization and labor efficiency rates, revenue per technician, first-time fix rate, callback percentage, average service ticket, quote-to-close conversion, PM agreement renewal and attachment rates, and overtime as a percentage of field labor., • Prepare capital request business cases for fleet, tooling, shop capacity, and headcount, with payback and return expectations stated plainly., • Develop customer-facing financial proposals for capital projects — installed cost, projected fuel and efficiency savings, simple payback and lifecycle cost, and applicable utility incentive and rebate capture. Operations, Code Compliance & the R Stamp Program You are the executive owner of our quality and code program. You are not expected to personally perform inspections or weld, but you are expected to understand what our certifications require and to make sure the organization never puts them at risk. • Maintain the integrity of the company’s National Board R Certificate of Authorization: enforce the Quality Control Manual in daily practice, support the designated QC Manager, manage the relationship with our Authorized Inspection Agency, and lead preparation for triennial National Board review and renewal audits., • Ensure repairs and alterations to pressure-retaining items are performed and documented to NBIC (NB-23) requirements, including R-1 and R-2 form execution, proper nameplate and stamping practice, and complete traceability of materials and welder qualifications., • Govern the welding program: ASME Section IX WPS, PQR, and welder performance qualification currency; continuity logs; and NDE coordination with third-party testing partners., • Apply ASME Section I, Section IV, and Section VIII Division 1 requirements appropriately across power boilers, heating boilers, and pressure vessels., • Enforce ASME CSD-1 controls and safety device requirements and NFPA 85 combustion safety practice on automatically fired equipment., • Own field execution across service dispatch, project scheduling, manpower planning, procurement and equipment lead times, subcontractor management, fleet, and shop throughput., • Own safety outcomes and the metrics that follow the company into every bid: TRIR, DART, and Experience Modification Rate. Lockout/tagout, confined space entry for boiler and vessel work, hot work, and respiratory protection are non-negotiable disciplines. Team Leadership & Change Management The technical problems in this business are solvable. The people problems are the hard part, and they are the reason this role exists. We are looking for high emotional intelligence — someone who reads a room, hears what a technician is actually saying under a complaint, and can hold a hard line without humiliating anyone. • Lead a multi-disciplinary team spanning field service technicians, boilermakers and welders, project managers, estimators, dispatch, and administrative staff., • Introduce process, measurement, and accountability into an environment that has historically run on relationships and tribal knowledge — and do it in a sequence the team can absorb. Sequencing and communication matter more than the changes themselves., • Build the succession bench: recruit, develop, and retain technicians in a labor market where the experienced boiler mechanic pool is shrinking and every competitor is fishing in the same pond. Own the apprenticeship and mentoring pipeline., • Set clear performance expectations, run consistent one-on-ones and reviews, coach the willing, and move decisively on the unwilling., • Serve as the escalation point for customer conflict, jobsite disputes, and internal friction — de-escalating without conceding margin. Commercial Growth & Customer Retention • Grow recurring revenue through preventive maintenance agreements and full-coverage service contracts; improve renewal rates and expand scope within existing accounts., • Support estimating and bid strategy on larger installations and retrofits; sit at the table on the accounts that matter., • Position the company on efficiency-driven work — burner and controls upgrades, condensing economizers, boiler plant optimization, fuel conversions, and decarbonization retrofits — where regulatory pressure is generating demand., • Maintain relationships with OEMs, distributors, engineering firms, mechanical contractors, and property management groups. Requirements Required Qualifications • Ten or more years of progressive operations leadership in commercial or industrial boiler, mechanical HVAC, power generation, or process piping contracting, including at least five years with direct P&L accountability., • Demonstrated experience operating inside an R Stamp certified organization — you have lived under a Quality Control Manual, worked alongside an Authorized Inspector, and been through a National Board review., • Working command of ASME Boiler and Pressure Vessel Code and the National Board Inspection Code as they apply to repair, alteration, and new installation., • Track record of improving gross margin and operating income in a service-and-project business, with specific numbers you can speak to., • Proven ability to build financial reporting from operational data and present it credibly to an owner, board, or private equity sponsor., • Experience leading fifteen or more employees across field and office functions, including hiring, development, and performance management., • Fluency with service management and ERP platforms and the discipline to make a team actually use them., • Bachelor’s degree in engineering, construction management, business, or a related field — or an equivalent combination of trade credentials and operating experience., • Valid driver’s license and willingness to be present in the field and at customer sites throughout the NJ/NY territory. Preferred Qualifications • Direct experience managing or holding responsibility for an R Stamp quality program, including manual authorship or revision and audit preparation., • Additional ASME certifications in the organization’s scope, such as S, U, PP, or A stamps, and National Board VR experience., • Prior background as a boiler technician, boilermaker, welder, or field service engineer before moving into management., • Experience with combustion analysis, boiler efficiency testing, stack loss and thermal efficiency measurement, O2 trim, turndown optimization, and heat recovery., • Union contract administration experience in the NJ/NY market., • Formal change management, Lean, or continuous improvement training., • Experience integrating an acquired business or standing up new systems and processes post-acquisition. Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Short Term & Long Term Disability, • Compensation: $100,000 - 150,000 base salary + bonues and car allowance

Job Description Job Summary: We are seeking a skilled and dependable HVAC Service Technician to maintain, diagnose and repair residential and/or commercial heating, ventilation, and air conditioning systems. The ideal candidate has strong troubleshooting skills, customer service experience, and a commitment to quality workmanship. Key Responsibilities: Diagnose and repair HVAC systems, including air conditioners, furnaces, heat pumps, and ventilation systems Perform routine maintenance on residential and commercial HVAC equipment Install new HVAC systems and retrofit existing systems when needed Test and calibrate HVAC systems for proper functionality Interpret wiring diagrams and technical manuals Communicate effectively with customers to explain repairs, options, and system care Complete work orders, service reports, and maintain accurate records Comply with all local HVAC codes, safety regulations, and company policies Maintain tools and inventory in service vehicle Participate in on-call rotation and respond to after-hours service requests Qualifications: High school diploma or GED required HVAC certification or diploma from technical school (EPA 608 certification required) 2+ years of field experience preferred Valid driver’s license with clean driving record Strong diagnostic and mechanical skills Familiarity with HVAC tools, gauges, and diagnostic equipment Good communication and customer service skills Ability to work independently and as part of a team Physical Requirements: Ability to lift up to 50 lbs and work in confined spaces, attics, crawlspaces, or rooftops Comfortable working in varying weather conditions Standing, bending, kneeling, and climbing ladders for extended periods Benefits: (if applicable) Competitive pay + overtime Paid time off and holidays Commission 401(k) plan Ongoing training and certification support Company vehicle and uniform provided

Job Description Lightning Mechanical LLC is seeking an experienced Commercial HVAC Service Technician to join our team in Maplewood, New Jersey. We provide commercial and industrial HVAC service, maintenance, repair, replacement, and installation throughout New Jersey and the New York metropolitan area. Our technicians work on a wide range of equipment, including VRV and VRF systems, rooftop units, split systems, heat pumps, boilers, pumps, motors, cooling towers, ventilation systems, controls, and related mechanical equipment. Lightning Mechanical also provides factory-trained service for Daikin VRV and Applied systems and supports many other major HVAC manufacturers. Responsibilities: • Diagnose and repair commercial HVAC equipment, • Perform preventive maintenance and equipment inspections, • Troubleshoot electrical, mechanical, refrigerant, and control-system issues, • Service VRV and VRF systems, rooftop units, split systems, heat pumps, boilers, pumps, motors, and cooling towers, • Replace compressors, motors, controls, valves, sensors, and other components, • Perform refrigerant recovery, evacuation, charging, and leak testing, • Complete service reports clearly and accurately, • Communicate findings, repair recommendations, and equipment conditions to customers and office staff, • Identify root causes instead of only addressing immediate symptoms, • Maintain company tools, vehicles, parts, and equipment, • Follow company safety procedures and applicable codes, • Participate in the on-call rotation for emergency service, • Travel to customer locations throughout New Jersey and the New York metropolitan area Qualifications: • At least 5 years of commercial HVAC service experience preferred, • Strong troubleshooting and diagnostic ability, • Experience working on commercial HVAC equipment and controls, • Knowledge of refrigeration cycles, electrical systems, airflow, hydronic systems, and mechanical components, • EPA Section 608 certification required, • Valid driver’s license and acceptable driving record, • Ability to work independently and complete service documentation accurately, • Ability to lift equipment, climb ladders, work on rooftops, and perform the physical duties of the position, • Strong communication and customer-service skills, • Daikin VRV, VRF, chiller, boiler, controls, or manufacturer training is strongly preferred, • Factory training and additional HVAC certifications are a plus What We Offer: • Full-time, year-round employment, • Competitive compensation based on experience, • Medical, dental, vision, retirement, life insurance, and paid time off, if applicable to this position, • Company vehicle and service tools, if applicable, • Ongoing technical and manufacturer training, • Opportunity to work on advanced commercial systems and mission-critical facilities, • Established company with in-house service, installation, piping, and sheet-metal capabilities, • Opportunity for advancement based on performance and technical ability Lightning Mechanical serves commercial properties, medical facilities, data centers, multi-tenant buildings, and other complex environments. Our technicians are supported by experienced office and field teams, specialized diagnostic equipment, and access to parts and factory resources. Lightning Mechanical LLC is an equal opportunity employer. For the one-line company pitch, keep the same one already entered because it applies to both jobs. \nCompany Description Lightning Mechanical LLC is an established commercial HVAC contractor based in Maplewood, New Jersey. We provide service, maintenance, repair, replacement, and installation for commercial and industrial HVAC systems throughout New Jersey and the New York metropolitan area. Our work includes VRV and VRF systems, boilers, pumps, cooling towers, ductwork, piping, controls, and in-house sheet metal fabrication. We serve commercial properties, medical facilities, data centers, multi-tenant buildings, and other mission-critical environments. Lightning Mechanical LLC is an established commercial HVAC contractor based in Maplewood, New Jersey. We provide service, maintenance, repair, replacement, and installation for commercial and industrial HVAC systems throughout New Jersey and the New York metropolitan area. Our work includes VRV and VRF systems, boilers, pumps, cooling towers, ductwork, piping, controls, and in-house sheet metal fabrication. We serve commercial properties, medical facilities, data centers, multi-tenant buildings, and other mission-critical environments.

Job Description Bill Leary Air Conditioning and Heating, Metuchen, NJ Job Title: Residential Installer Position Summary: We have Full time positions available. Pay is hourly plus commission. As an experienced HVAC tech you will perform installations of a variety of heating and air conditioning systems. Key attributes for this position include being a team player with honesty, integrity and motivation to do a great job for our customers. Work Hours: Start time is 7am-8am Monday - Friday. Work hours will vary based upon scheduling needs and seasonal demand including some after hours and possible weekends. Pay Scale: Ranges between $75K and $150K depending on experience and performance, plus benefits. When you become part of the Bill Leary AC & Heating team, we offer: • Great Benefits - Medical / Dental / Vision Coverage, • Competitive Salary, • Commission – no caps on earning, • Earning Incentives, • Excellent Training Programs, • PTO, • Simple IRA, • Company vehicle, cell phone and iPad for on duty activities, • No out of pocket for fuel. Position Requirements: • HVAC install experience, • 5+ years install experience, • Strong technical experience, • Goal orientated with a strong desire to succeed, • Professional appearance, • Ability to use iPad and smart phone, • Valid driver's license, • Insurable by company insurance carrier, • Mandatory background check prior to hire. Job Type: Full Time \nCompany Description Bill Leary Air Conditioning & Heating is a family owned and operated business. The year 2026 marks our 37th year serving Middlesex County and the surrounding areas of Central New Jersey, Monmouth County, Somerset County, and Union County. We provide all levels of residential and commercial heating and air conditioning sales, design, engineering, installation, service, repair, and maintenance. Bill Leary Air Conditioning & Heating is fully insured, bonded, licensed and certified by the State of New Jersey Department of Building and Construction to work on their projects and the New Jersey Economic Development Authority to work on their public schools. We keep up-to-date with the most current codes, laws, and utility rebate procedures. Our firm has been selected and approved by The State of New Jersey Department of Building & Construction to perform work on jobs up to $15,000,000. Our completed and current jobs include: Universities Public Schools Municipal Buildings Police Stations And many other large and small commercial jobs Bill Leary Air Conditioning & Heating is a family owned and operated business. The year 2026 marks our 37th year serving Middlesex County and the surrounding areas of Central New Jersey, Monmouth County, Somerset County, and Union County.\n\nWe provide all levels of residential and commercial heating and air conditioning sales, design, engineering, installation, service, repair, and maintenance.\n\nBill Leary Air Conditioning & Heating is fully insured, bonded, licensed and certified by the State of New Jersey Department of Building and Construction to work on their projects and the New Jersey Economic Development Authority to work on their public schools. \n\nWe keep up-to-date with the most current codes, laws, and utility rebate procedures.\n\nOur firm has been selected and approved by The State of New Jersey Department of Building & Construction to perform work on jobs up to $15,000,000. Our completed and current jobs include:\n\nUniversities\nPublic Schools\nMunicipal Buildings\nPolice Stations\nAnd many other large and small commercial jobs

Job Description Duties • Install heating, ventilation, and air conditioning (HVAC) systems. -Fabricate, layout and install ductwork. • Assist with the installation of new HVAC systems in residential and light commercial settings., • Collaborate with other team members to ensure efficient and timely completion of projects., • Follow safety protocols and adhere to industry standards during all HVAC installations and repairs. ```Qualifications``` • Proven experience as an HVAC technician or installer, • Strong mechanical knowledge and aptitude, • Ability to read and interpret blueprints and technical drawings, • Proficiency in using hand tools, power tools, and testing equipment, • Excellent problem-solving skills and attention to detail, • Ability to work independently or as part of a team. -Must have clean drivers license. Note: This job description is intended to provide a general overview of the position. Duties and responsibilities may be subject to change based on organizational needs and priorities. Job Type: Full-time Benefits: • 401(k) matching, • Company truck, • Dental insurance, • Employee discount, • Flexible schedule, • Fuel card, • Health insurance, • Health savings account, • Paid time off, • Professional development assistance, • Referral program, • Tools provided, • Vision insurance Schedule: • 8 hour shift, • Day shift, • Year round work Supplemental Pay: • Bonus opportunities, • Commission pay, • Overtime pay, • Tips Work Location: In person

Job Description Company Information Our company was established in 1984 as an HVAC service company. We have grown into one of the largest mechanical contractors in NJ servicing large commercial and industrial buildings consisting of chiller plants, built-up penthouses and large HVAC equipment. We believe all customer interactions should be executed with the highest level of professionalism, excellence and competency at all levels of the organization. Job Responsibilities: • Responsible for all deliveries and pickups to various companies, in various locations, • Load and unload trucks, • Deliver parts and material from customer sites, • Pick up parts and materials from customer sites, • Pick up parts and materials from supply houses, • Transport refrigerant tanks to recycling vendor, • Transport scrap to scrap yard Job Requirements/Qualifications: • Minimum high school graduate or equivalent, • Must be able to obtain a DOT Medical Card, • CDL Class B License - a plus, but not necessary, • Valid driver’s license, • Clean driving record, • 1 plus year(s) driver experience, • HVAC knowledge preferred, but not required, • Ability to work early hours, as necessary, • Good communication skills, • Safety conscious, • Team player, • Ability to follow directions, • Ability to deal with all weather conditions, • Ability to lift 50 pounds Salary to Match Experience

Jersey Refrigeration is hiring an experienced HVAC/R Service Technician. We're a growing, well-established mechanical services company serving Newark and the surrounding ~20-mile area, and we're investing in modern tools (ServiceTitan, company vehicles, tablets) to make our techs' jobs easier and more efficient. What You'll Do • Diagnose, repair, and maintain residential and light commercial HVAC/refrigeration systems, • Perform tune-ups, installs, and service calls using ServiceTitan for scheduling and job documentation, • Communicate clearly with customers and represent the company professionally on every call, • Keep your van stocked and organized; document jobs with photos What We're Looking For • Minimum 5 years of hands-on HVAC/R service experience (residential and/or light commercial), • Valid driver's license with a clean-ish driving record, • EPA Universal certification preferred, • You do NOT need to hold your own NJ HVAC license — you'll work under our Master HVACR license, • Reliable, punctual, and takes pride in doing the job right the first time What We Offer • Competitive pay based on experience, plus performance-based incentives, • Company vehicle, tools/equipment provided, • Group health benefits, • Paid time off (12 PTO days + 1 week vacation, front-loaded January 1), • P-Card for material purchases — no more fronting job costs, • Room to grow with an expanding company

Senior Mechanical Engineer US-NJ-Edison Job ID: 2026-3254 of Openings: 1 Category: MEP LiRo-Hill Overview We have an immediate need for a Sr. Mechanical Engineer for our Edison, NJ location. Come join our team! We are looking to build services and capabilities through the growth of our key asset- our staff. Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. You can become part of an organization that has a strong track record and is looking to strengthen relationships and capabilities to continue being a trusted resource for our clients in the public and private sector. We are proud to be known as an “Integrated Construction, Design and Technology Solutions” firm and we have delivered on that label time and again. Recently, Global Infrastructure Solutions Inc. (GISI), the parent company of The LiRo Group and Hill International, Inc. consolidated a portion of the highly experienced staff of both LiRo and Hill in the Northeast to create a larger, more efficient, and cost-effective team to serve clients. LiRo-Hill is a 1100-person firm with offices in NYC, Long Island, Buffalo, Rochester, Boston and Edison, NJ. Responsibilities In this role, you will lead the design and development of HVAC systems for commercial, industrial, municipal, and healthcare facilities. Additional responsibilities will include: • Lead the design and development of HVAC systems for commercial, industrial, municipal and healthcare facilities., • Perform load calculations, energy modeling, and system sizing using industry-standard software., • Prepare detailed mechanical drawings, specifications, details and controls diagrams., • Coordinate with multidisciplinary teams including architects, structural engineers, and other stakeholders., • Conduct site visits, field inspections, and construction administration including review of shop drawings, RFIs etc., • Mentor junior engineers and provide technical guidance., • Perform QA/QC reviews of projects to ensure high standards of quality are maintained., • Ensure compliance with local codes, standards and client requirements., • Interface with clients, attend project meetings, and present technical solutions., • Participate in project sales proposals and interviews., • Conduct site assessments and generate comprehensive technical reports. Qualifications • Bachelor’s degree in Mechanical Engineering, • Professional Engineer (PE) license required, • Minimum of 10 years of relevant experience in HVAC design, • Proficiency in AutoCAD, Revit, Microsoft Excel, Word, Teams and HVAC design software (e.g., Trane Trace, HAP), • Strong knowledge of mechanical codes, energy efficiency standards, and sustainable design practices, • Excellent leadership, mentoring and project management skills, • Strong technical writing and communication skills, • Certifications or Licenses (if required): PE License, NY, NJ We are committed to your success, and we invest in your growth and development to unlock your full potential. • Competitive Total Compensation Package, • Employee- Only Stock Purchase Plan, • Mentoring programs, • Continuing Education Program, • Employee referral bonus, • Volunteer/Industry association opportunities Our Culture: We believe in the power of collaboration. We work hard to build a corporate culture that empowers all our employees to freely share their ideas, know their presence, and contributions are truly valued, fostering a climate where our employees are enabled to maximize their full potential. -We offer a comprehensive benefits package and a positive work environment -Compensation: Minimum: $150,000: $170,000. The range provided is the salary that the Firm in good faith believes at the time of this posting is willing to pay for the advertised position. Exact compensation will be determined on the individual candidates’ qualifications and location. • The selected candidate must be authorized to work in the United States; Visa sponsorship is not available for this role. LiRo-Hill is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, creed, religion, national origin, ancestry, marital status, sex, affectional or sexual orientation, gender identity or expression, or protected veteran status; and will not be discriminated against on the basis of disability. #ID22 #ZR22 Compensation details: 150000-170000 Yearly Salary PI34ee6458bb1b-38003-39462574

Job Description Director of Industrial Sales Everflow Supplies is a growing specialty provider serving the plumbing, HVAC, industrial, mechanical, and fire protection industries across North America. We engineer, source, and deliver dependable product solutions that help our customers succeed — and we pride ourselves on being more than a supplier. We strive to be a trusted partner and an extension of our customers’ teams. Our culture is built around collaboration, accountability, and growth. We move with purpose, think like owners, and believe every team member plays an important role in driving success. As Everflow continues to expand, we’re looking for motivated people who want to grow with us and help build something meaningful. Location: Remote; approximately 50% travel Position Summary: The Director - Industrial Sales is responsible for driving revenue and expanding market share by promoting and selling the manufacturer’s heavy-duty plumbing products, pipes, valves, fittings (PVF), and wholesale distributors in the industrial trade. The role involves high-level technical consultation, relationship management, and strategic contract negotiation. This senior-level role requires a highly motivated sales professional with strong industrial sales experience, technical aptitude, and the ability to build long-term partnerships across multiple channels. The ideal candidate will possess deep knowledge of industrial and commercial plumbing systems, construction project cycles, and distributor relationships within the PVF and industrial supply markets. What You'll Do: • Sales Growth within Industrial Channel, • Expand market share through new account acquisition and growth within existing customer relationships., • Drive specification opportunities with contractors, engineers, plant managers, and industrial end users., • Collaborate with leadership to identify long-term growth opportunities and strategic vertical markets., • Build relationships with decision-makers across industrial, manufacturing, commercial construction, and distribution channels., • Maintain a strong sales pipeline through prospecting, networking, referrals, and industry engagement., • Provide technical guidance on PVF products, plumbing systems, and application-specific solutions., • Interpret customer specifications, local and national plumbing codes, and industrial requirements. What You’ll Bring: Required: • 7+ years of proven outside sales experience in B2B industrial sales, manufacturing, commercial plumbing, or PVF distribution., • Demonstrated success growing industrial territories and managing strategic customer relationships., • Strong understanding of industrial plumbing systems, valves, fittings, piping applications, and related technical products. Preferred: • Experience working with or selling through industrial distributors and organizations, • Experience selling into industrial manufacturing, water treatment, food processing, chemical processing, energy, or commercial construction markets., • Existing relationships within industrial distribution and contractor networks. Why Everflow Supplies: At Everflow, we believe great companies are built by great people. We are committed to creating a culture where employees feel supported, empowered, and connected to the work they do every day. We value people who think like owners, move with urgency, work collaboratively, and follow through on their commitments. As a growing organization, we offer opportunities to learn, contribute, and grow your career alongside a team that is passionate about serving customers and building long-term success together. Our benefits offerings include medical, dental, and vision coverage, paid time off, company-sponsored retirement plans, and additional programs designed to support our employees and their families. Most importantly, we strive to create a workplace where people feel valued, supported, and empowered to succeed. Target Compensation Range: The posted pay range of $110,000.00 - $160,000.00 plus commission, represents the anticipated hiring range for this position. Actual starting salary will depend on geographic location, market conditions, internal equity, relevant experience, education, and job-related qualifications. Most candidates will receive an offer within the salary range applicable to their primary work location. Benefits: Our benefits offerings include medical, dental, and vision coverage, paid time off, company-sponsored retirement plans, and additional programs designed to support our employees and their families. Most importantly, we strive to create a workplace where people feel valued, supported, and empowered to succeed. Speakman is an Equal Opportunity Employer. We are committed to creating an inclusive workplace and consider all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, or any other characteristic protected by applicable federal, state, or local law.

Job DescriptionHaddad Plumbing and Heating Inc. is seeking a Plumber Helper to join our team. The Plumber Helper will support the Plumbing department by performing Plumbing work and assist Plumber on daily tasks and projects. Essential Functions • Measure, cut, thread and assemble new pipe, placing the assembled pipe in hangers or other supports., • Cut or drill holes in walls or floors to accommodate the passage of pipes., • Assist pipe fitters in the layout, assembly, and installation of piping for air, gas and water systems., • Cut pipe and lift up to fitters., • Fit or assist in fitting valves, couplings, or assemblies to tanks, pumps, or systems using hand tools., • Mount brackets and hangers on walls and ceilings to hold pipes, and set sleeves or inserts to provide support for pipes., • Excavate and grade ditches, and lay and join pipe for water and sewer service, • Disassemble and remove damaged or worn pipe., • Wear PPE as established by the company guidelines, • Any other tasks as assigned manager Required Education and Experience • Must have a OSHA 10 or 30, • Organizational and multitasking abilities, • Active listener with excellent communication skills, • Sound judgment and critical thinking, • Professional behavior and conduct, • Must be able to work well individually and with a team.Compensation Starts at $17 Hourly with no experience Benefits Include: • Medical Insurance, • Dental Insurance, • Vision Insurance, • 401(k) Plan with Company Match, • Paid Time Off (PTO), • Paid Holidays, • Paid Vacation, • Opportunities for Career Growth and AdvancementPosition Type and Expected Hours of Work This is a full-time position Monday – Saturday 7am-3:30pm. Arrangements for flexibility of schedule on Saturday’s will be arranged with Supervisor. About Haddad Plumbing and Heating Inc.: Haddad Plumbing and Heating Inc. is a Commercial Plumbing and HVAC company dedicated to: Providing premier workmanship and consistent delivery of reliable plumbing, heating and HVAC systems. We deliver expertise and professionalism in a competitive marketplace, using innovative techniques and tools to enhance productivity and efficiency, and meet crucial deadlines. Our ultimate goal is deliver better cost returns that will deliver greater value. When Haddad Plumbing & Heating Inc. is awarded a new construction project, our managers apply their expertise to present a comprehensive proposal that meets all requirements. Our in-house drafters then create technical designs and plans to be used by construction engineers. Project managers work closely with the general contractor and team of supervisors to ensure that the project remains on schedule without sacrificing quality work. Finally, our team of project managers with plumbing and HVAC supervisors coordinate when and how plumbing and HVAC systems are synergized and implemented. With all projects, our goal is to earn our clients’ trust to be their plumbing and HVAC contractor of choice, now and in the future. Our success is measured by achieving our clients’ vision and objectives for the project, but going above and beyond their expectations as guided by our core values. Here at Haddad Plumbing and Heating Inc., we earn this privilege with our clients by providing best-in-class service, value, and quality in every project. Powered by JazzHR RZEwxh5vCO

Job DescriptionSummary: Haddad Plumbing and Heating Inc. is seeking a Drafter to join our design and project support team. The Drafter will work closely with Project Managers, engineers, and architects to prepare accurate and detailed technical drawings for mechanical construction projects. This role is responsible for converting design concepts, sketches, and specifications into high‑quality 2D and 3D CAD drawings to support construction planning and execution. The ideal candidate will be highly detail‑oriented, technically proficient, and capable of collaborating across disciplines to ensure drawings meet applicable codes, industry standards, and project requirements. Responsibilities: • Create comprehensive 2D shop drawings and coordinated 3D mechanical, plumbing, and ductwork models from architectural and engineering plans., • Utilize AutoCAD MEP and Revit to draft highly accurate spatial layouts for commercial new construction projects., • Run automated clash-detection workflows using Navisworks to flag and resolve spatial conflicts before fabrication., • Collaborate closely with Project Managers and field supervisors to integrate real-world feedback into technical submittals., • Organize and maintain digital drawing logs, project revisions, and BIM coordination files.What We Are Looking For:, • Experience: Minimum 2–3 years of dedicated drafting experience specifically within the plumbing, HVAC, or mechanical trade., • Software Mastery: Proficient in AutoCAD MEP or Revit. Experience with Navisworks or SysQue is a major plus., • Technical Literacy: Ability to read and accurately interpret complex commercial architectural, structural, and MEP engineering blueprints., • Location Fit: Ability to work full-time, on-site at our Newark, NJ headquarters., • Collaboration: Strong English communication skills to sync effectively with project managers and participate in trade coordination updatesCompensation:, • $70,000.00 - $75,000.00 / year (Paid Weekly Baseline: Approx. $1,346.15 - $1,442.31 / week)Position Type:, • Full-TimeSchedule:, • Monday – Friday, 7:00 AM – 5:00 PM Our Benefits Package Includes: • Health & Wellness: Comprehensive Medical, Dental, and Vision insurance., • Retirement: 401(k) plan with a company match to help you build your future., • Paid Time Off: Generous Paid Time Off (PTO), paid vacation days, and paid holidays., • Growth: Real opportunities for career advancement within our growing company.Sign-On Bonus Details:, • We value specialized technical skills from day one. You will earn a $1,500 Sign-On Bonus split across two milestones, • First Payout ($500 at 30 Days): Awarded for mastering our internal layering/modeling standards and successfully setting up your first commercial project model., • Second Payout ($1,000 at 90 Days): Awarded for demonstrating accurate clash-detection adjustments and meeting your initial project submittal deadlines.Why Join Haddad Plumbing & Heating? At Haddad, we are a leading commercial plumbing and HVAC contractor trusted with multi-million dollar new construction projects across New Jersey. Our in-house drafting team doesn't just copy sketches—you create the spatial roadmap that our construction engineers use to build complex modern infrastructure. We invest in high-performance workstations, modern workflows, and our professional staff. When you join us, you get major career stability, a premium corporate benefits package with reliable weekly pay, and a focused, collaborative team environment. Powered by JazzHR gkj9c86SR3

Job DescriptionPlease do not call the office regarding this position. All applications must go through Indeed. About Us Lightning Mechanical has been serving New Jersey and the greater Tri-State area since 2005. We specialize in commercial, industrial, and multi-tenant HVAC services, including repair, maintenance, installation, and in-house sheet metal fabrication. Our team is factory-trained on Daikin VRV and Applied systems, along with many other VRF manufacturers, giving us an edge in delivering dependable service and quality workmanship HVAC Contractor New Jersey_ Rep…. As a growing contractor with a reputation for excellence, we’re looking to bring on the next generation of project management talent. Position Summary We are seeking a motivated Junior HVAC Project Manager to support the execution of commercial and industrial mechanical projects. This is an excellent opportunity for someone with 1–3 years of experience (or strong internship/assistant PM experience) who is eager to grow into a senior-level role. You’ll work closely with senior project managers and company leadership, gaining hands-on exposure to scheduling, budgeting, procurement, and client relations. Responsibilities • Assist in managing HVAC projects from kickoff to closeout under the guidance of senior staff., • Track project schedules, budgets, and progress updates., • Support the preparation of submittals, RFIs, change orders, and project documentation., • Coordinate material and equipment deliveries., • Communicate with subcontractors, vendors, and internal teams to ensure timely execution., • Attend project meetings, document action items, and follow up with stakeholders., • Monitor site safety compliance and quality standards., • Gradually take ownership of smaller projects as skills and experience grow. Qualifications • 1–3 years of experience in HVAC, mechanical contracting, or construction project management., • Familiarity with HVAC systems, terminology, and construction practices., • Strong organizational, communication, and problem-solving skills., • Proficiency with Microsoft Office; exposure to project management software is a plus., • Bachelor’s degree in Mechanical Engineering, Construction Management, or related field (preferred but not required)., • Driven, detail-oriented, and eager to develop into a senior project manager. Compensation & Benefits • Competitive salary: $55,000 – $70,000 per year., • Health, dental, and vision insurance options., • 401(k) retirement plan., • Paid time off and holidays., • Mentorship and career growth opportunities — with a clear path to senior-level project management.

Job DescriptionBenefits: • 401(k), • Health insurance, • Training & development Please do not call our office regarding this position. DAIKIN HVAC Repair Specialists We are a results-oriented company providing servicing, maintenance, and installation of HVAC systems since 2005. We have an extensive knowledge base with experience in servicing multiple brands and lines of equipment, including boilers, pumps, motors, frequency drives, water towers, and more. Our team is committed to giving you peace of mind by ensuring your investment stays up and running so you can enjoy peace of mind day after day. Lightning Mechanical provides factory-trained service, installation, and maintenance for Daikin VRV and Applied systems, as well as many other VRF manufacturers. Our cross-trained service and installation technicians using factory tools service the New York City metro area, which sets us apart from our competition. Benefits/Perks • Flexible Schedule, • Competitive Pay, • Career AdvancementJob Summary We are seeking an experienced HVAC Pipefitter to join our team. In this role, you will build and maintain pipe systems in both residential and commercial settings. You will read blueprints, plan installations, and prepare pipes. The ideal candidate is analytical, with attention to detail and experience with pipes of a variety of materials. VRV/VRF a PLUS! Responsibilities • Review and interpret blueprints to understand project requirements, • Braze/solder copper parts and components using ASME brazing techniques, • Able to install, service, and repair water source heat pump systems, • Installation, repair, and maintenance of refrigeration systems, with particular expertise in handling the intricate network of pipes that carry refrigerants, • Inspect and prepare sites for construction operations, • Assemble and install piping systems such as ductile iron, PVC and steel, copper, • Test system functionality, • Repair any leaks or malfunctions, • Use a variety of hand and power tools, • Work with other construction professionals to complete projects, • Follow all relevant safety guidelinesQualifications, • Previous experience as a HVAC Pipefitter is preferred, • Strong mathematical and problem-solving skills, • Attention to detail, • Knowledge of all relevant health and safety guidelines, • Excellent communication skills, • Ability to meet the physical demands of the position, including lifting heavy objects, • Ability to work overtime when required

Job Description Our client is a boiler, burner, and water heater service company serving commercial and residential customers across northern New Jersey. Our reputation is built on getting a technician to the customer quickly and making sure that technician arrives with the right part on the truck. We are hiring a Service and Inventory Manager to own both halves of that equation. This is a hands-on leadership role that sits between the field and the warehouse. On any given morning you will be dispatching technicians to service calls, walking a technician through a no-heat diagnosis over the phone, pulling parts for the next installation, and placing an order with a supplier before stock runs thin. The person who succeeds here is a heating professional first and an administrator second: someone who knows what a low-water cutoff does, knows which circulator the shop tends to burn through, and knows how to keep a crew organized without micromanaging it. You will directly supervise the field service team and carry full responsibility for the parts and equipment inventory that keeps them productive. It is a role with real authority over scheduling, purchasing, and stocking decisions, and real accountability for response times, first-visit completion rates, and inventory accuracy. KEY RESPONSIBILITIES Team and Service Management You will run daily operations for the service department and act as the primary technical resource for the field. • Direct daily operations for the service technician team, including start-of-day assignments and end-of-day close-out., • Schedule and dispatch repair, maintenance, and installation jobs, balancing emergency calls against planned work., • Serve as the escalation point for technical troubleshooting on boilers, burners, and water heaters, supporting technicians by phone or on site as needed., • Coach and develop technicians on diagnostic technique, workmanship standards, and customer interaction., • Coordinate with customers and office staff on job status, timelines, and follow-up work., • Enforce safety practices and code compliance across all field work. Inventory Control and Procurement You will own the parts and equipment inventory end to end, from stocking levels to what goes on the truck each morning. • Track stock levels of boiler parts, burner components, water heaters, fittings, controls, and tools., • Procure material and equipment for immediate jobs as well as for shelf stock, working with suppliers on pricing, availability, and lead times., • Order replacement parts and equipment and track open orders through to receipt., • Stage and prepare material and equipment for field technicians ahead of scheduled jobs., • Conduct regular physical inventory counts and reconcile against system records., • Prevent stock shortages on high-turn items while reducing waste, obsolescence, and overstock., • Maintain an organized, well-labeled warehouse and shop area. Requirements Required • Working technical knowledge of hydronic and steam heating systems, including boilers, burners, water heaters, controls, and related piping., • Prior experience supervising, leading, or coordinating a field service or trades team., • Demonstrated experience tracking inventory, purchasing parts, or managing stock in a service, distribution, or contracting environment., • Strong interpersonal and communication skills, with the ability to work effectively with technicians, customers, and vendors., • Organized and detail-oriented, able to manage competing priorities in a fast-moving service environment., • Comfortable with scheduling, dispatch, and inventory software, and with basic spreadsheet work., • Valid driver's license and a clean driving record. Preferred • Five or more years in the boiler, burner, HVAC, or plumbing trades, with a background as a service technician., • New Jersey Black Seal low-pressure boiler operator license, HVACR license, or comparable trade certification., • Experience with commercial boiler and burner service in addition to residential work., • Familiarity with northern New Jersey supply houses and manufacturer distribution channels., • Experience establishing min/max stocking levels or reorder points. Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Compensation: $80,000 - 90,000

Job DescriptionCompany Description Uncommon Schools is a nonprofit network of high-performing public charter schools dedicated to providing an exceptional K-12 education in economically disadvantaged communities. Operating in Boston, Camden, New York City, Newark, and Rochester, we are committed to closing the college completion gap and preparing every student for college and beyond. Our students consistently exceed national benchmarks, reflecting our dedication to their success. We invest deeply in our educators, offering weekly coaching, feedback, and professional development to ensure excellence in teaching and leadership. Join us to work hard, do good, and make a lasting difference! Job Description Uncommon Schools is seeking a HVAC Operating Engineer to join the charter network’s New Jersey Facilities team. This position provides an opportunity for an experienced HVAC Operating Engineer with at least seven (7) years' relevant experience to work with a dedicated facilities group, deepen his/her technical skills, and help ensure that Uncommon provides well-maintained, comfortable, and safe educational facilities for our students and staff. Uncommon’s portfolio in New Jersey comprises buildings constructed from the very early 1900s through the early 2020s, operating HVAC systems dating from 1966 to the recent past few years. As ambient comfort is essential to a productive learning and teaching environment, the impact of this individual’s attentiveness will be felt and deeply appreciated across the region. Reporting to the Senior Manager, Facilities Management Team, the HVAC Operating Engineer will perform all technical work necessary to inspect, maintain, repair, and modify HVAC system in our buildings. With expertise in HVAC – and to a lesser extent in construction and plumbing – in multi-family, schools, and commercial buildings, the successful candidate will be responsible for conducting minor HVAC projects and managing larger ones and ensuring they are completed on time and within budget. The HVAC Operating Engineer will partner with senior Facilities team members and outside consultants on the planning, coordination, and supervision of mechanical construction and repair activities implemented by outside vendors, will ensure project timelines are met and ensure quality control standards are followed, mentor junior staff, and handle all HVAC-related communication with stakeholders. Uncommon values candidates who have the drive and ability to work hard, are highly self-motivated, are eager to take on and implement assignments and projects, and have a strong commitment to customer service and satisfaction. Safe, efficient, healthy, clean, comfortable, and reliable buildings are essential to Uncommon’s mission to deliver an excellent education to our students and a comfortable working environment to our dedicated staff. As a member of the NJ Facilities Team, the HVAC Operating Engineer will: • maintain current knowledge of the National Standard HVAC Code and other applicable building codes and perform all facets of the HVAC trade in accordance with those codes and in a safe and effective manner, • diagnose problems with HVAC systems, evaluate solutions to remedy issues, and provide sound recommendations to supervisors, • in emergency situations take immediate steps to contain the problem and restore the system to sound working condition, • in emergency situations maintain clear and consistent communication with stakeholders to apprise them of steps being taken to address the issue, • troubleshoot and repair all HVAC type systems currently available in the market, • maintain records of corrective and preventive work assignments received through an automated work order system (currently SchoolDude, soon ZenDesk), • assist onsite Facilities Managers and General Maintenance Workers with work projects or special assignments, • respond to campus emergency calls after hours as needed, • perform other duties as assignedQualifications Required Technical Skills: • Significant journeyman-level HVAC experience along with the trade knowledge to effectively understand and perform all facets of the HVAC trade in accordance with the National Standard Plumbing Code and other applicable codes, • Strong background in commercial heating projects large and small, including hot water boilers and gas furnaces, • Ability to read as-built plans for all buildings in portfolio, • Ability to read and interpret construction drawings, specifications, submittals, cut sheets, layouts, technical manuals, schematic drawings, and other HVAC-related trade documents, • Advanced knowledge of BMS systems and system operations, • Ability to procure replacement parts as needed to make all necessary repairs, • Ability to properly and safely use the tools of the trade and carry out all tasks expected of a Snr. HVAC Technician, • Ability to troubleshoot and repair refrigerant-driven cooling and heating equipment (heat pump systems), • Ability to troubleshoot and repair water-driven heating and cooling equipment, • Ability to troubleshoot and repair water or glycol pump systems, • Ability to troubleshoot and service chillers and cooling towers, • Ability to change filters and belts and clean coils as needed to ensure proper functioning of units, • Ability to troubleshoot and implement recommended repair/replacement of, • gas valves, • economizer motors and dampers, • compressors and contactors, • dampers, • chilled water and hot water pumps, • glycol injection units, • Ability to evacuate and top-off units with refrigerant General Technical Skills • Bachelor’s Degree equivalent or seven plus (7+) years of experience in the HVAC field, • Evidence of progressive responsibility and experience in HVAC field, with four plus (4+) years as head technician, • Ability to handle multiple projects simultaneously, • Familiarity with key building systems (HVAC, electrical, mechanical, plumbing), • Familiarity with OSHA and other Life Safety codes, etc., • Computer skills necessary to operate BMS system, • Facility with Microsoft office suite, • Strong organizational skills, attention to detail, and follow-through, • Ability to communicate effectively verbally and electronically with facilities staff, school staff, and vendors, • Available to work nights and weekends when necessary, • Extreme flexibility, with a strong work ethic and an entrepreneurial spirit to accommodate high level of responsibility and multiple priorities, • New Jersey low pressure black seal boiler, HVAC or other certificate, training, or licenses a plus, • Carry a current EPA card enabling technician to dispense of refrigerants, • Valid driver’s license and vehicle, • Strong capacity to operate independently Physical Requirements • The physical requirements outlined below are representative of those that must be met by an employee to successfully perform the essential functions of this position., • Stand or walk for up to two (2) hours at one time, up to eight (8) hours per day, • Sit for fewer than two (2) hours during an eight (8)-hour day, • Lift or carry up to 35 pounds frequently and 100 pounds occasionally, • Lift up to 100 pounds to waist height and up to 35 pounds in a range of motions from floor to overhead, • Frequently use hands for simple grasping, fine manipulation, pushing or pulling, • Occasionally climb stairs or ladders, dig, or pull with forces up to 100 pounds, • Frequently bend, squat, kneel, knee stand, lift overhead, reach overhead, push, or pull, • Work outdoors in a variety of temperatures and environmental conditions, • Possess ability to work at heights, full range of body motions and physical agility, and ability to maintain balance Mission Alignment • Demonstrate a relentless drive to improve the minds and lives of students in and out of school, • Demonstrate a commitment to the schools’ rules, regulations, and safety procedures, • Implement and enhance the school’s systems and culture Create high accountability for oneself as well as for building staff and vendors #ZR Additional Information Our people are what make us Uncommon. We offer competitive compensation and comprehensive benefits that support the personal health, wellness, and finances of our staff and their families. Our compensation philosophy values equity & fairness and attracting & retaining top talent. Compensation Compensation for this role is between $43/hr to $50/hr. Starting pay is determined using various factors including but not limited to relevant professional experience, education, certifications, and tenure with Uncommon Schools. Benefits • Regional staff will have the same holidays and sustainability days as school-based staff in their region, and flexible summer PTO, • Extensive, best-in-class training and development, • Comprehensive health, dental, and vision insurance plans + pre-tax flexible spending (FSA), dependent care (DCFSA), and health saving accounts (HSA), • Financial Planning, • New Jersey Pension program, • Paid leave of absence options (parental, medical, disability, etc.), • Mental health and counseling support + wellness benefits *A detailed list of all benefits is located HERE. At Uncommon, we believe that a supportive and welcoming environment helps our students, staff, and community thrive. We are dedicated to building a team that brings a wide range of perspectives and experiences, reflective of the communities we serve---with over 70% of our staff identifying as people of color. Our organization values respect and open dialogue on important topics that shape our school culture. As an equal opportunity employer, Uncommon provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. We also ensure that individuals with disabilities receive all privileges and benefits associated with employment and are provided reasonable accommodations for the interview process and to perform core job functions. If you would like to request an accommodation, please email recruitment@uncommonschools.org.

Job DescriptionHaddad Plumbing and Heating Inc. is seeking a Junior Estimator to join our design and project support team. The Junior Estimator will be Responsible for Taking Off Material, Equipment, and Labor from Drawings Accurately from Company’s Estimating Software. A Detailed Proposal will be Generated after Takeoff is Completed. The Junior Estimator will also Generate Change Orders as needed from Project Managers. Responsibilities: • Review Full Drawing Set and Specifications., • Send Out all Fixtures and Equipment to Vendors for Pricing., • Use Specified Material for the Assembly of the Project., • Prepare Bill of Material., • Prepare Labor Hours from The Estimate. Education, Qualities & Skills required • Minimum 2-year College Degree, • HVAC/Plumbing Estimation Experience Preferable, • Must know how to use MS Office and Possess the Ability to Read and Interpret Blueprints. Compensation: $ 60,000 Annually Benefits Include: • Medical Insurance, • Dental Insurance, • Vision Insurance, • 401(k) Plan with Company Match, • Paid Time Off (PTO), • Paid Holidays, • Paid Vacation, • Opportunities for Career Growth and Advancement Position Type and Expected Hours of Work This is a full-time position. Days and hours of work are Monday through Friday 7:00AM – 5:00PM About Haddad Plumbing and Heating Inc.: Haddad Plumbing and Heating Inc. is a Commercial Plumbing and HVAC company dedicated to: Providing premier workmanship and consistent delivery of reliable plumbing, heating and HVAC systems. We deliver expertise and professionalism in a competitive marketplace, using innovative techniques and tools to enhance productivity and efficiency, and meet crucial deadlines. Our ultimate goal is deliver better cost returns that will deliver greater value. When Haddad Plumbing & Heating Inc. is awarded a new construction project, our managers apply their expertise to present a comprehensive proposal that meets all requirements. Our in-house drafters then create technical designs and plans to be used by construction engineers. Project managers work closely with the general contractor and team of supervisors to ensure that the project remains on schedule without sacrificing quality work. Finally, our team of project managers with plumbing and HVAC supervisors coordinate when and how plumbing and HVAC systems are synergized and implemented. With all projects, our goal is to earn our clients’ trust to be their plumbing and HVAC contractor of choice, now and in the future. Our success is measured by achieving our clients’ vision and objectives for the project, but going above and beyond their expectations as guided by our core values. Here at Haddad Plumbing and Heating Inc., we earn this privilege with our clients by providing best-in-class service, value, and quality in every project. Powered by JazzHR JQHYgxkW8y

Job DescriptionOverview Are you a Mechanical Superintendent who knows how to run a commercial jobsite safely and on schedule? WRS Mechanical has a field leadership role in the Newark, New Jersey area. Responsibilities • Supervise field crews and foremen installing commercial HVAC, plumbing, piping and sheet metal systems, • Plan daily and weekly work to hit the project schedule and look-ahead, • Run a safety-first jobsite: toolbox talks, JHAs, inspections and OSHA compliance, • Coordinate with general contractors, Project Managers, engineers and other trades, • Manage manpower, equipment and material deliveries, • Track installed quantities, daily reports, RFIs and field changes, • Oversee quality control, inspections, testing, startup and closeout punch listsRequirements, • 5+ years of field supervision on commercial mechanical, HVAC or plumbing projects, • Mechanical subcontractor experience strongly preferred, • Strong blueprint and coordination drawing reading skills, • Working knowledge of Procore, Bluebeam or similar field tools, • OSHA 30 required or able to obtain; journeyman license a plus, • Proven ability to lead crews and work with general contractors and PMsCompensation & Benefits, • Salary: $110,000 - $150,000 per year (USD), • Competitive salary, • Benefits package, • Career growth, • Permanent, full-time positionHow to Apply Interested? Submit your resume today to start the conversation. Keywords: Mechanical Superintendent, mechanical construction, commercial HVAC, plumbing, piping, sheet metal, mechanical contractor, Newark NJ jobs

Job Description At Mobile Air & Power Rentals, we provide innovative cooling, heating, dehumidification, and power solutions for our customers nationwide. We rent out a vast array of equipment, including portable air conditioners, chillers, heaters, and generators, helping clients save time and money while enhancing their operations and memorable events. We are immediately hiring Technical Sales Reps to join our dynamic team. Why Mobile Air? Here are some of the perks & rewards: • Full-time positions, • Take home company vehicle, • Provided technology including phone and computer, • Expense account for business-related costs, • Competitive pay with commissions, • Health, Vision, and Dental Insurance, • Life Insurance, • 401k with company match, • Paid time off (vacation, sick days, holidays), • Career development and advancement potential, • Employee discount programs What you'll do: Lead our market development efforts within one of the largest climate control rental fleets in the nation. This role focuses on building new client relationships and enhancing engagement with existing accounts across various sectors. The ideal candidate is proactive, results-driven, and possesses strong problem-solving skills. Key Responsibilities: • Develop and execute sales strategies to target new markets while maintaining existing client relationships., • Conduct sales calls and presentations to specific customer segments., • Collaborate with teams to provide customized solutions for clients., • Keep accurate records of sales activities, pipeline status, and market trends., • Engage in ongoing training to stay informed about product offerings and industry trends. Requirements: • 3-5+ years of successful outside sales experience, ideally in HVAC or industrial rentals., • Bachelor’s Degree in a related field preferred., • Clean driving record and valid driver's license., • Ability to spend over 90% of time in the field., • Strong understanding of HVAC and electrical systems, with commercial or industrial sales experience preferred., • Familiarity with the construction and engineering processes is a plus., • Knowledge of relevant sectors like Healthcare and Commercial Real Estate is desirable., • Competitive drive, strong organizational skills, and excellent communication abilities. Join our team of dedicated professionals and contribute to the success of our HVAC operations while advancing your career in a fast-paced environment! #LI-Hybrid

Job Description New Product Development Engineer PA NJ DE Tri State Area | Speakman an Everflow Company Everflow Supplies is a growing specialty provider serving the plumbing, HVAC, industrial, mechanical, and fire protection industries across North America. We engineer, source, and deliver dependable product solutions that help our customers succeed. We strive to be a trusted partner and an extension of our customers' teams. Our culture is built around collaboration, accountability, and growth. We move with purpose, think like owners, and believe every team member plays an important role in driving success. As Everflow continues to expand, we are looking for motivated people who want to grow with us and help build something meaningful. Position Summary Speakman is seeking a New Product Development Engineer to take mechanical plumbing products from concept through production. This role combines hands-on mechanical design, materials and manufacturing knowledge, simulation, prototyping, testing, technical documentation, and cross-functional project leadership. You will manage multiple development projects while working closely with Product Management, Marketing, Project Management, Quality, Product Compliance, Sustaining Engineering, Sourcing, Operations, Manufacturing, vendors, and outside testing or certification resources. The ideal candidate is both a strong mechanical engineer and a disciplined project owner who can balance performance, cost, quality, timing, and customer needs. Location and Work Arrangement This search is focused on candidates located in Pennsylvania, New Jersey, or Delaware, with priority given to the Philadelphia and Delaware markets. The team's future office location is still being evaluated, so candidates must be able to support periodic in-person work within the region. This position should not be considered permanently remote. What You Will DoProduct Design and Development • Design and develop mechanical plumbing products, including faucets, showerheads, shower valves, and plumbing fittings, into functional and manufacturable solutions., • Translate product concepts into detailed components and complex assemblies that meet performance, cost, quality, and schedule requirements., • Apply knowledge of materials, manufacturing processes, and design constraints to create products that can be produced reliably and competitively., • Evaluate new technologies, materials, and design approaches that improve performance, reduce cost, or respond to emerging market needs., • Use 3D modeling and simulation tools to optimize product designs and support sound engineering decisions.Prototype Test and Validate, • Plan and obtain prototypes to test fit, function, performance, durability, and manufacturability., • Develop test equipment and protocols that support internal quality requirements and applicable published codes and standards., • Analyze test results, identify root causes, and refine designs until requirements are met., • Support product-related technical investigations with vendors, customers, installation sites, and outside testing or certification resources as needed.Document and Commercialize, • Prepare layouts, drawings, bills of material, engineering specifications, cost studies, and other product documentation for proposals and manufacturing orders., • Maintain accurate engineering-system information and follow applicable ISO quality procedures., • Partner with Sourcing, Quality, Manufacturing, Operations, and Product Management to move designs toward production and commercial readiness., • Communicate project status, decisions, risks, and next steps clearly to technical and nontechnical stakeholders., • Manage multiple concurrent projects and provide support for related NPD, production, and engineering priorities as needed.What Success Looks Like, • First 30 days: Learn the organization, key partners, company policies, SolidWorks, Vault, development processes, gate approvals, and deliverable expectations., • By 60 days: Own a small project or defined workstream, organize the work, meet milestones, and communicate effectively across functions., • By 90 days: Manage at least two design-intensive projects with increasing independence and clear control of schedule, risks, and stakeholder coordination.What You Will Bring, • Current residence in Pennsylvania, New Jersey, or Delaware with the ability to support periodic in-person work in the Philadelphia / Delaware region., • Bachelor's degree in Mechanical Engineering., • At least eight years of relevant experience in manufacturing engineering and new product development, with demonstrated ownership of physical products from concept through production., • Advanced hands-on experience with 3D modeling software, preferably SolidWorks, including detailed components, complex assemblies, drawings, tolerance analysis, and simulation., • Strong knowledge of manufacturing processes, materials, and design constraints, including metals, thermoplastics, rubber, molding, and fabrication., • Experience with prototyping methods, product testing, design validation, and technical problem-solving., • Demonstrated ability to move mechanical products through design, prototype, validation, gate review, manufacturing readiness, and production., • Experience designing or validating products against plumbing codes, published standards, ISO procedures, or closely related regulated-product requirements., • Experience developing prototypes, test protocols, root-cause analyses, and corrective design iterations., • Strong organization, attention to detail, written and verbal communication, and the ability to manage multiple projects with limited supervision., • Ability to work effectively in a fast-paced environment with tight deadlines and shifting priorities., • Willingness to travel periodically to vendors, customer locations, installation sites, and testing resources for project support.Why Speakman an Everflow Company At Speakman, we believe great companies are built by great people. We are committed to creating a culture where employees feel supported, empowered, and connected to the work they do every day. We value people who think like owners, move with urgency, work collaboratively, and follow through on their commitments. As a growing organization, we offer opportunities to learn, contribute, and grow your career alongside a team that is passionate about serving customers and building long-term success together. Target Compensation Range: The anticipated base salary range is $95,000 to $110,000. The role is eligible for an annual bonus under the applicable company plan. Actual starting salary will depend on geographic location, market conditions, internal equity, education, experience, and job-related qualifications. Benefits: Our benefits offerings include medical, dental, and vision coverage, paid time off, company-sponsored retirement plans, and additional programs designed to support employees and their families. Most importantly, we strive to create a workplace where people feel valued, supported, and empowered to succeed. Speakman, an Everflow company, is an Equal Opportunity Employer. We are committed to creating an inclusive workplace and consider all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, or any other characteristic protected by applicable federal, state, or local law.

Job Description Hazen and Sawyer is seeking an HVAC Engineer for our Iselin, NJ office. As part of our HVAC/Plumbing team the selected candidate can expect to work closely with more experienced HVAC Engineers to perform HVAC and Plumbing designs for some of the nation's most challenging and rewarding projects. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK., • A flexible hybrid work schedule supports today's busy professionals.Key Responsibilities: This role focuses on municipal water and wastewater projects including planning, preliminary and final designs, and providing engineering services for projects in construction. The candidate should enjoy working within a team environment, and seek to develop HVAC and Plumbing design skills. Required Qualifications: • Bachelors of Science degree in Mechanical Engineering (preferred)., • Ability to communicate well both orally and in writing., • A minimum of (3) years of experience performing heating, ventilating, cooling, and plumbing design for municipal, commercial or industrial facilities., • A PE license is preferred, or the candidate must have plans of obtaining their PE., • Experience with Revit and other CAD skills is preferred., • Relevant areas of experience includes:, • Application of various types of heating, ventilation, air conditioning, and hydronic piping systems, • Heating and cooling load calculations, • HVAC controls systems and building/facility management systems, • ASME B31.1 Power Piping or ASME B3.9 Building Services Piping designs, • International Mechanical Code, Plumbing Code and Fire Code, • Performance of detailed HVAC and hydraulic pressure drop calculations, • Performance of Plumbing pipe sizing and fixture count analysis, • SMANCA Duct Construction Standards, • NFPA 820 HVAC designs, • Hot water boiler and chilled water system design, • Must be Authorized to work in the US Preferred Qualifications: It is preferable to have experience in the HVAC systems related to water and wastewater facilities, although relevant experience in municipal, industrial or commercial buildings and facilities is acceptable. What We Offer: • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job Description Job Summary: The Director of Maintenance provides strategic and operational leadership for the Authority's maintenance operations, ensuring safe, efficient, and cost-effective maintenance of all HACE properties. Reporting to the Deputy Executive Director, this position oversees maintenance staff, budgets, preventive maintenance, contractor performance, regulatory compliance, and capital planning while working collaboratively with other departments to support quality housing. Responsibilities: • Direct the day-to-day operations of the Maintenance Department while developing department goals, performance standards, and maintenance strategies., • Plan, organize, and oversee preventive, routine, and emergency maintenance programs to ensure safe, efficient, and well-maintained properties., • Develop, administer, and monitor the department operating budget, maintenance inventory, and capital replacement planning while identifying cost-saving opportunities., • Develop and maintain a preventative maintenance program to proactively address potential issues and extend the lifespan of equipment and facilities., • Oversee work order management, quality control, inspections, and NSPIRE readiness to ensure compliance with HUD and applicable federal, state, and local regulations., • Participates in the development of scopes of work, requests for proposals (RFP’s), invitations for bids (IFB’s), and requests for quotations (RFQ’s)., • Oversee work order management, maintenance records, inspections, quality control, and NSPIRE readiness using CMMS and other documentation systems., • Manage the procurement of necessary supplies, tools, and equipment required for maintenance operations, ensuring cost-effective and timely acquisition., • Monitor and manage contractor and vendor performance, including maintenance agreements and service contracts, to ensure compliance and satisfactory results., • Ensure departmental compliance with all applicable HUD, federal, state, and local regulations governing maintenance, workplace safety, and public housing operations. Qualifications: • Valid driver's license and ability to travel between properties as required., • Bachelor's degree in Facilities Management, Construction Management, Engineering, Business Administration, Public Administration, or a related field preferred., • Seven (7) years of progressively responsible maintenance management experience, including at least five (5) years supervising maintenance personnel across multiple residential or commercial properties., • Public housing or affordable housing experience preferred, • Strong knowledge of building systems, including HVAC, plumbing, electrical, and general carpentry., • Familiarity with relevant local, state, and federal regulations governing maintenance operations., • Excellent problem-solving and decision-making skills, with the ability to handle multiple priorities and adapt to changing circumstances., • Effective communication and interpersonal skills to interact with residents, contractors, vendors, and colleagues at all levels., • Ability to enforce existing union agreements at his/her level., • Ability to prepare costs estimates for material and required personnel., • Proficient computer skills, including experience with maintenance management software or computerized maintenance management systems (CMMS).

Duration: 09 Months Contract with Possible Extension Responsibilities: • Provide Multifamily program management oversight over scope, schedule and budget of energy efficiency projects in compliance with the BPU Order and procedures., • Ensure projects meet all program requirements, including project scope and cost effectiveness., • Develop and maintain the processes for implementing energy efficiency projects and programs in accordance with requirements for the Multifamily program, • Interface with associates, vendors, customers and outside consultants to assure the Program rules and requirements are maintained, the projects are cost effective, and the information needed for management and regulatory reporting is accurate and timely., • Perform and oversee program and project QA/QC as required; Apply knowledge in energy savings measures and techniques to program and project oversight., • Need to be familiar with residential and commercial energy efficiency program incentive structures. Manage customer relationships to provide program services with a high level of customer satisfaction. • Coordinate and direct the activities of vendors and contractors., • Review vendor deliverables., • Monitor vendor performance and review/process vendor invoices., • Ensure vendor and employee compliance with safety protocols and practices. Compile and analyze data from various projects / sources to monitor the status of customer projects and report to management. • Projects may include the installation of various energy conservation measures (ECMs) such as HVAC, lighting, motors, energy management systems, etc., as appropriate for the program., • Analyze performance results for management reports; Provide monthly project status forecasts., • Assist with special projects and ad hoc requests as necessary., • During storm restoration efforts, may be required to perform functions outside of routine duties and on a schedule that may be different from normal operations., • Develop and manage the processes for implementing energy efficiency projects and programs in accordance with requirements for BPU approved programs., • Develop and customize a customer’s project proposal to maximize incentives and energy savings by combining commercial & industrial program incentive structures., • Coordinate and direct the activities of business development, trade allies, and vendors. Review vendor deliverables., • Perform project site visits as required, • Must be proficient with working independently while maintaining and applying working knowledge of Standards of Business Controls and meeting management’s expectations for effective internal business controls. Job Specific Qualifications: • Experience processing milestone-based construction payments and forecasting financial spend, • Knowledge of energy efficiency measures, implementation, and cost, • Demonstrated excellent communication skills (oral and written), • Demonstrated proficiency with Microsoft Office (PowerPoint, Excel & MS Word), • Commitment to process improvement and attention to detail, • Able to travel within territory to conduct meetings with customers, perform inspections, and manage relationships with contractor Desired • Vendor management, • Invoicing skills. Education: • B.S. Degree plus 5 years of experience in the space of energy efficiency programs, construction, or related fields. In lieu of a degree, 9 years of experience in the space of energy efficiency programs, construction, or related field About US Tech Solutions: US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit _ US Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, colour, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. AI Statement: By applying, you acknowledge that AI-assisted tools may be used during hiring. IND01

Job Description About Us Air Systems Maintenance, Inc. (ASM) is an established commercial HVAC and mechanical contractor serving New Jersey, New York, and Pennsylvania. Founded in 1964, ASM provides HVAC installation, service, maintenance, and mechanical solutions for commercial and industrial facilities. Position Summary ASM is seeking an experienced Mechanical Estimator with a strong background in commercial HVAC and mechanical contracting. This is a key role for an experienced estimator who can independently manage the estimating process and deliver accurate, competitive, and profitable bids with minimal training. The ideal candidate will have strong knowledge of commercial HVAC systems, mechanical construction, estimating, takeoffs, project costs, and margins, along with established relationships with vendors and subcontractors. This position is fully onsite at Kenilworth, NJ. Key Responsibilities • Prepare accurate estimates, quotes, and bid proposals for commercial HVAC and mechanical projects., • Review drawings, specifications, and bid documents and perform detailed equipment and piping takeoffs., • Conduct site visits, project walk-downs, and bid walks to evaluate scope and field conditions., • Obtain and analyze pricing from vendors, suppliers, and subcontractors., • Develop accurate labor, material, equipment, and subcontractor costs and establish appropriate project margins., • Maintain and leverage strong relationships with vendors, subcontractors, and clients., • Manage multiple bids and ensure proposals are accurate, competitive, and submitted on time., • Follow up on bids and work with management and clients throughout the bidding process., • Identify scope gaps, cost risks, and opportunities for value engineering or cost savings. Qualifications • 7+ years of mechanical/HVAC estimating experience preferred., • Must have experience with a commercial mechanical or HVAC contractor., • Strong understanding of commercial HVAC and mechanical systems, including RTUs, chillers, boilers, piping, pumps, controls, and related equipment., • Proven experience performing accurate mechanical drawing takeoffs for equipment and piping., • Strong understanding of labor, material, subcontractor pricing, project costs, and margins., • Established relationships with mechanical vendors and subcontractors preferred., • Ability to independently manage estimates from initial bid review through submission and follow-up., • Strong attention to detail, organization, communication, and negotiation skills., • Proficiency with Microsoft Office and mechanical estimating/takeoff software., • Field HVAC/mechanical experience is a strong plus. Air Systems Maintenance, Inc. is an Equal Opportunity Employer.