Computer vision jobs in Vestal, New YorkCreate job alerts

WE ARE LOOKING FOR GREAT PEOPLE TO JOIN OUR TEAM- just like you! Our associates have a lot in common. They have great interpersonal skills, enjoy working independently, are self-motivated, and have a relentless drive. Did we mention that while they are working hard, they also like to have fun? We offer flexible hours, competitive pay, and great benefits for both full and part-time associates. If this sounds like a good fit for you, come join our team! The majority of responsibility for the Territory Sales Lead is the supervision and development of the assigned associates to drive sales and meet retailer and client expectations. The Territory Sales Lead will also be responsible for project completion, stocking and maintaining the areas we are responsible for, and store communication. This responsibility is demonstrated by effectively selling and educating customers and store personnel about product lines and other project (s) deemed necessary. The Territory Sales Lead reports directly to the Market Sales Manager. What would you do in this role? DUTIES and RESPONSIBILITIES include but are not limited to the following: Build rapport through daily communication with store associates and management Train, supervise, and develop the skills of Sales Merchandisers, fellow Territory Sales Leads, and seasonal associates Educate customers and store personnel on the features and benefits of our client’s brands and product lines Maintain accuracy and high quality of work in all areas of the store to meet or exceed client expectations Have detailed knowledge of all company policies Communicate successes or potential barriers to the Market Sales Manager Knowledgeable, detailed understanding, and consistent use of all available functions of the handheld device Maintain company, client, and retailer confidentiality REQUIREMENTS and QUALIFICATIONS, including but not limited to the following: Lifting objects and products up to a maximum of 50 lbs. with frequent lifting and/or carrying of objects/products up to 35 lbs, in addition, the ability to lift heavy objects up to 100lbs with assistance from another associate Work performed could be while sitting, standing, or walking Work performed will entail fine manipulation of hands or fingers, bending, twisting, squatting, and climbing, as well as upper and lower body mobility Experience/comfort level with electronics/technical products Independent and self-motivated Must be able to work a flexible schedule, including nights, overnights, and weekends High School diploma or equivalency certification required A valid driver's license is required, as travel to additional locations may be necessary Automobile liability insurance is required to be maintained Computer, printing capability, internet access, and email required Customer service or sales experience required Must be eligible to work in the U.S. A minimum of conversational proficiency in English (both spoken and written) with the ability to communicate with customers and/or coworkers at a conversational level in real-time. Other Duties - Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Rate of Pay $19.50 As an Anderson Merchandisers Associate, you may be eligible for these benefits*. • Flexible work schedules, • 401(k) retirement plan, • Health Insurance – including Dental and Vision, • Telehealth, • Health Savings Account, • Accident Insurance, • Critical Illness Insurance, • Life Insurance, • Long Term Care, • Short Term Disability, • Long Term Disability, • Associate Assistance Fund, • Anderson Cares Natural Disaster Fund, • Associate Savings Plan, • Anderson Cares Fund, • Paid Time Off, • Discounts - Cell Phone, Vehicle, Pet Insurance, • Training & Career Development *All benefits subject to eligibility per company policy. IND-123

Job Description C.H. Thompson is currently seeking a motivated Plating Line Operator to join our team. As a Plating Line Operator you will play a crucial role in maintaining quality, safety, and productivity through a hands-on approach. Specifically, the role focuses on setting up, operating and tending to plating tanks. Additionally, this role offers a fantastic opportunity to work directly with our Leadership Team, with a clear path for career advancement and professional growth. About Us: C.H. Thompson is a premier one-stop-shop for all of your finishing needs. Our continuous focus on improving quality and increasing productivity has made CH Thompson Finishing a leader in the industry. We offer several services including anodizing, painting, powder coating, intricate masking and silk screening, allowing us to provide multiple finishes on individual parts. We service a multitude of industries including; aerospace, agricultural, automotive, computer, electronics, household, industrial, medical and military. Our customer base ranges from small privately owned machine shops to top Fortune 500 companies such as Lockheed Martin, General Dynamics and BAE Systems. We are also proud to be ISO 9001:2015, AS9100D and NADCAP certified! Position Overview • Machine Operation:, • Setup, operate, and/or tend plating tanks., • Immerse parts in plating tanks for specified times based on customer specifications., • Adjust controls to regulate flow of current and voltage supplied to system in order to control plating process., • Observe gauges to ensure that machines are operating properly; make adjustments or stop machines when problems occur., • Rack and un-rack parts., • Perform equipment maintenance including cleaning tanks and housekeeping., • Quality Control:, • Visual Inspection/Defect Identification: Inspect plates parts for defects, such as air bubbles, flaking, or uneven coverage., • Adherence to Specifications: Verify that the product aligns with work instructions and customer requirements., • Collaboration:, • Team Communication: Coordinate with other production team members to ensure smooth workflow during preceding and subsequent processes., • Feedback Loop: Provide feedback to Supervisor on challenges or improvements to enhance efficiency., • Safety and Compliance:, • Personal Protective Equipment (PPE): Wear appropriate PPE (gloves, safety glasses) to protect against chemicals and sharp edges., • Work Area Safety: Maintain a safe work environment, especially when handling chemicals., • Other:, • Other duties as assigned by the Supervisor. Qualifications: • Education:, • High School Diploma or Equivalent is preferred., • Experience:, • Relevant experience in metal finishing, manufacturing, or a related field is preferred., • Skills & Competencies:, • Attention to Detail: Must be able to multitask while maintaining detail and accuracy., • Communication: Excellent written and verbal communicator., • Problem-Solving: Ability to identify issues and recommend solutions., • Technical Skills: Basic math and computer skills, ability to use specialized testing tools and machinery., • Physical Requirements:, • Standing: The ability to stand for extended periods of time is crucial., • Lifting: Must be able to lift up to 50 pounds., • Mobility: The role requires the ability to bend, stoop, push, pull and reach., • Quality Standards: Ensure all products and parts meet stringent quality standards. Shift Hours: • Monday – Thursday 6:30am – 3:30pm, Friday 6:30am-12:30pm Total Compensation Package: • Wage, • $18.00 - $21.00 per hour, • Compensation depends on the selected candidate's experience., • Benefits - We recognize the value of a comprehensive benefits package and work vigorously to ensure our package meets the needs of our employees and their families. Eligible employees can elect and participate in variety of benefits including:, • Paid Holidays, • Paid Vacation / Sick Time, • 401 (k) Retirement Plan with Company Match, • Medical, Dental & Vision Insurance, • Employee Assistance Program (EAP), • Health Savings Account (HSA), • Company Paid Life Insurance, • Voluntary Insurance Benefits including Disability Insurance, Accident Insurance, Cancer Insurance, Critical Illness Insurance, Hospital Indemnity Insurance and Life Insurance, • Free Fountain Soda Machine On-site! C.H. Thompson is an Equal Opportunity Employer. We provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description Triple Cities Metal Finishing is currently seeking a motivated Plating Line Operator to join our team. As a Plating Line Operator you will play a crucial role in maintaining quality, safety, and productivity through a hands-on approach. Specifically, the role focuses on setting up, operating and tending to plating tanks. Additionally, this role offers a fantastic opportunity to work directly with our Leadership Team, with a clear path for career advancement and professional growth. About Us: Triple Cities Metal Finishing provides a wide variety of surface finishing options to a multitude of industries including aerospace, agricultural, automotive, computer, electronics, household, industrial, medical, military, construction, and office parts. We are ISO 9001:2015, AS9100D & NADCAP Certified! Since 1945, TCMF has made innovative, as well as necessary changes in the way we conduct everyday business. From advanced surface preparation to highly technical finishing processes, we can handle the smallest pieces to large parts over 30 feet long. Our three shifts of skilled professionals in our 125,000 square foot facility have made us the vendor of choice for metal finishing for Northeastern United States. Whether it is electroplating, electroless plating, wet paint, or powder coat, we finish it right the first time! Position Overview • Machine Operation:, • Setup, operate, and/or tend plating tanks., • Perform regular chemical additions to maintain optimal plating solution concentrations and ensure consistent quality of plated products, • Immerse parts in plating tanks for specified times based on customer specifications., • Adjust controls to regulate flow of current and voltage supplied to system in order to control plating process., • Observe gauges to ensure that machines are operating properly; make adjustments or stop machines when problems occur., • Rack and un-rack parts., • Perform equipment maintenance including cleaning tanks and housekeeping., • Quality Control:, • Visual Inspection/Defect Identification: Inspect plates parts for defects, such as air bubbles, flaking, or uneven coverage., • Adherence to Specifications: Verify that the product aligns with work instructions and customer requirements., • Collaboration:, • Team Communication: Coordinate with other production team members to ensure smooth workflow during preceding and subsequent processes., • Feedback Loop: Provide feedback to Supervisor on challenges or improvements to enhance efficiency., • Safety and Compliance:, • Personal Protective Equipment (PPE): Wear appropriate PPE (gloves, safety glasses) to protect against chemicals and sharp edges., • Work Area Safety: Maintain a safe work environment, especially when handling chemicals., • Other:, • Other duties as assigned by the Supervisor. Qualifications: • Education:, • High School Diploma or Equivalent is preferred., • Experience:, • Relevant experience in metal finishing, manufacturing, or a related field is preferred., • Skills & Competencies:, • Attention to Detail: Must be able to multitask while maintaining detail and accuracy., • Communication: Excellent written and verbal communicator., • Problem-Solving: Ability to identify issues and recommend solutions., • Technical Skills: Basic math and computer skills, ability to use specialized testing tools and machinery., • Physical Requirements:, • Standing: The ability to stand for extended periods of time is crucial., • Lifting: Must be able to lift up to 50 pounds., • Mobility: The role requires the ability to bend, stoop, push, pull and reach., • Quality Standards: Ensure all products and parts meet stringent quality standards. Shift Hours: • Monday – Friday 7:00am-3:30pm Total Compensation Package: • Wage, • $17.00 - $20.50 per hour, • Compensation depends on the selected candidate's experience., • Benefits - We recognize the value of a comprehensive benefits package and work vigorously to ensure our package meets the needs of our employees and their families. Eligible employees can elect and participate in variety of benefits including:, • Paid Holidays, • Paid Vacation / Sick Time, • 401 (k) Retirement Plan with Company Match, • Medical, Dental & Vision Insurance, • Employee Assistance Program (EAP), • Health Savings Account (HSA), • Company Paid Life Insurance, • Voluntary Insurance Benefits including Disability Insurance, Accident Insurance, Cancer Insurance, Critical Illness Insurance, Hospital Indemnity Insurance and Life Insurance, • Free Fountain Soda Machine On-site! Triple Cities Metal Finishing is an Equal Opportunity Employer. We provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description Triple Cities Metal Finishing is currently seeking a Water Treatment Operator to join our 1st shift team. As a Water Treatment Operator, you will be responsible for the day-to-day operations and maintenance of the water treatment plant. This includes monitoring and adjusting treatment processes, ensuring compliance with safety and environmental regulations, and maintaining equipment to ensure the delivery of safe and clean water. About Us: Triple Cities Metal Finishing provides a wide variety of surface finishing options to a multitude of industries including aerospace, agricultural, automotive, computer, electronics, household, industrial, medical, military, construction, and office parts. We are ISO 9001:2015, AS9100D & NADCAP Certified! Since 1945, TCMF has made innovative, as well as necessary changes in the way we conduct everyday business. From advanced surface preparation to highly technical finishing processes, we can handle the smallest pieces to large parts over 30 feet long. Our three shifts of skilled professionals in our 125,000 square foot facility have made us the vendor of choice for metal finishing for Northeastern United States. Whether it is electroplating, electroless plating, wet paint, or powder coat, we finish it right the first time! Position Overview • Monitor Operations: Oversee the operation of the water treatment plant, including monitoring gauges, flowmeters, charts, and system control computers., • Conduct Water Analysis: Perform water analysis tests such as hardness, alkalinity, pH, turbidity, and chlorine residual to ensure water quality., • Adjust Chemical Dosages: Determine and adjust chemical feed rates to maintain proper treatment levels, • Maintain Equipment: Conduct routine preventive maintenance on plant equipment, including pumps, piping, and filtration systems, • Respond to Alarms: Quickly and effectively respond to alarms and issues with systems and equipment, • Record Data: Accurately record data regarding treatment plant operations and distribution system pressures, tank levels, and flow rates, • Compliance: Ensure that plant operations comply with local, state, and federal regulations, • Safety: Follow all safety protocols and procedures to maintain a safe working environment. Qualifications: • Communication Skills: Strong verbal and written communication skills., • Physical Requirements: Ability to lift and move heavy equipment., • Technical Skills:, • Strong understanding of electrical systems and plumbing., • Water treatment background is preferred., • Strong mechanical aptitude and troubleshooting abilities., • Experience with PVC, CPVC, and black steel pipe is preferred. Shift: • Monday – Friday 7:00am-3:30pm Total Compensation Package: • Wage, • $18.50/hour, • Compensation depends on the selected candidate's experience., • Benefits - We recognize the value of a comprehensive benefits package and work vigorously to ensure our package meets the needs of our employees and their families. Eligible employees can elect and participate in variety of benefits including:, • Paid Holidays, • Paid Vacation / Sick Time, • 401 (k) Retirement Plan with Company Match, • Medical, Dental & Vision Insurance, • Employee Assistance Program (EAP), • Health Savings Account (HSA), • Company Paid Life Insurance, • Voluntary Insurance Benefits including Disability Insurance, Accident Insurance, Cancer Insurance, Critical Illness Insurance, Hospital Indemnity Insurance and Life Insurance, • Free Fountain Soda Machine On-site! Triple Cities Metal Finishing is an Equal Opportunity Employer. We provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws

Job Description Are you ready to shape the future of IT? Join Integris, where integrity meets innovation, and people come first. At Integris, we don’t just offer jobs, we offer purpose. As a nationally recognized Best Places to Work and a leader in future-ready managed services, we’re redefining how businesses experience IT. Our mission is bold: to empower clients and employees alike through secure, strategic, and scalable technology solutions. We’re looking for talent that thrives in a culture of clarity, trust, and relentless execution, individuals who believe that IT is not just support, but a strategic advantage. If you’re passionate about innovation, driven by impact, and ready to grow with a company that puts People First, you’ll find your place here. Job Summary The role of the Integris Systems Technician (ST) is responsible for providing frontline technical support for single end-user level issues, encompassing personal computer, printer, and Windows application matters. The Systems Technician serves as the initial point of contact for client technical assistance, managing inquiries received through email or the client portal. The ST may execute their responsibilities from the service desk or the field. Job Responsibilities • Manage service intake via email and the client portal., • Conduct basic troubleshooting for non-complex issues within single-user system environments., • Document troubleshooting activities accurately within the ticketing system., • Support Professional Services with client onsite deployment as needed., • Adhere to established client support documentation. Job Qualifications Education/Certification Requirements: • Possession of A+ and/or O365 Fundamentals or obtainment of A+ and/or O365 Fundamental or equivalent on-the-job experience., • High School Diploma/GED or equivalent qualification. Experience Requirements: • Preferably, a minimum of 1 year of service-related experience., • Basic infrastructure and troubleshooting skills., • Valid driver's license required. At Integris, we value our team members and offer comprehensive benefits, including: • Medical, Dental, and Vision Insurance, • 401K Retirement Plan, • Minimum 4 Weeks of Paid Time Off (PTO), • Birthday PTO, • Paid Holidays, • Paid Time Off for Volunteering, • Short-Term and Long-Term Disability Insurance, • Life Insurance, • Supplemental Insurance, • Employee Assistance Program Join us in transforming IT services for small and midsize businesses across regulated industries. Be part of a team that’s scaling nationally, investing in vertical expertise, and building for better. Integris is an equal opportunity employer, committed to diversity and inclusion. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, gender, pregnancy, sexual orientation, gender identity, age, familial status, disability, genetic information, or any other protected class under applicable federal, state, and local laws. #LI-Hybrid

Job Description Triple Cities Metal Finishing is currently seeking an Assistant Manager for our Paint & Powdercoat Department. As an Assistant Manager you will drive production flow and material coordination, directly impacting our throughput and ensuring we hit our on-time delivery targets every time. Additionally, this role offers a fantastic opportunity to work directly with our Leadership Team, with a clear path for career advancement and professional growth. About Us: Triple Cities Metal Finishing provides a wide variety of surface finishing options to a multitude of industries including aerospace, agricultural, automotive, computer, electronics, household, industrial, medical, military, construction, and office parts. We are ISO 9001:2015, AS9100D & NADCAP Certified! Since 1945, TCMF has made innovative, as well as necessary changes in the way we conduct everyday business. From advanced surface preparation to highly technical finishing processes, we can handle the smallest pieces to large parts over 30 feet long. Our three shifts of skilled professionals in our 125,000 square foot facility have made us the vendor of choice for metal finishing for Northeastern United States. Whether it is electroplating, electroless plating, wet paint, or powder coat, we finish it right the first time! Position Overview Leadership and Supervision: • Lead and manage the Paint & Powdercoat team, ensuring they remain on task with high performance and adherence to safety and quality standards., • Provide training and development opportunities for team members to enhance their skills and knowledge. Operational Efficiency: • Distribute production schedules or work orders to departments., • Monitor production schedules to ensure job targets are met., • Identify and implement process improvements to enhance efficiency and productivity., • Help to keep employees on task and promote increased throughput by assisting with racking, prepping, inspecting, material handling, and by gathering proper paperwork and materials needed., • Identify and resolve any issues or inefficiencies in the Paint & Powdercoat Process such as incorrect paperwork - communicate with engineering and the quality team on changes needed or missing documentation., • Work closely with other departments to ensure seamless workflow and continuous improvement., • Implement and maintain quality control procedures to ensure all products meet industry standards and customer specifications. Process & Supply Management: • Oversee the Paint & Powdercoat processes, ensuring they are carried out efficiently and effectively., • Ensure all team members have the necessary supplies and tools to complete their jobs efficiently and plan ahead to ensure there are no gaps in production and/or down time., • Monitor inventory levels and coordinate with the procurement team to replenish supplies as needed. Work Order Management: • Review and interpret detailed work order instructions to guide the team in accurately painting parts according to specifications., • Ensure work orders are followed meticulously to maintain high-quality standards. Customer Service: • Assist with shipping coordination (matching paperwork, working with drivers, obtaining BOLs), • Respond to customer inquiries Safety: • Maintain a clean and organized work area to promote safety and efficiency., • Ensure adherence to all safety protocols and use of required personal protective equipment (PPE). Qualifications • Experience:, • Previous experience in production or manufacturing supervisory role preferred., • Skills:, • Clear and concise communication skills, both verbal and written, to effectively convey information and/or ideas professionally across all levels of the organization., • Ability to create and maintain positive and professional relationships at all levels of the organization., • Strong attention to detail, • Strong analytical skills, • Ability to problem-solve issues to their root cause and work to implement corrective action., • Excellent organization skills., • Proven experience leading successful teams in a manufacturing or industrial environment. Education Requirements • High school diploma or GED Preferred Total Compensation Package: • Wage, • $62,500 - $70,000 per year., • Compensation depends on the selected candidate's experience., • Benefits - We recognize the value of a comprehensive benefits package and work vigorously to ensure our package meets the needs of our employees and their families. Eligible employees can elect and participate in variety of benefits including:, • Paid Holidays, • Paid Vacation / Sick Time, • 401 (k) Retirement Plan with Company Match, • Medical, Dental & Vision Insurance, • Employee Assistance Program (EAP), • Health Savings Account (HSA), • Company Paid Life Insurance, • Voluntary Insurance Benefits including Disability Insurance, Accident Insurance, Cancer Insurance, Critical Illness Insurance, Hospital Indemnity Insurance and Life Insurance, • Free Fountain Soda Machine On-site! Triple Cities Metal Finishing is an Equal Opportunity Employer. We provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job DescriptionJob Title: Shipping and Receiving Specialist – 1st Shift Job Description The Shipping and Receiving Specialist ensures that all outgoing and incoming products are accurately documented, safely handled, and delivered on time to meet customer requirements. This role combines computer-based coordination and documentation with hands-on warehouse activities to support a high-volume manufacturing operation. The specialist plays a key role in maintaining inventory accuracy, supporting supply chain processes, and delivering high-quality service to internal and external customers. Responsibilities • Coordinate all products scheduled to ship within specified timeframes, ensuring they are properly documented, packaged, and safely secured for transport., • Prepare and manage shipping documentation, including bills of lading, packing slips, and other required forms, ensuring accuracy and compliance with customer requirements., • Verify quantities and confirm that all customer specifications for transport and packaging are met prior to shipment., • Confirm shipments in the computer system, update order status, and maintain accurate backorder records., • Prepare detailed delivery lists for trucks and ensure all outbound loads are organized and ready for on-time dispatch., • Consult daily with supervisors and managers to understand shipping and receiving priorities and ensure on-time delivery and high levels of customer satisfaction., • Ensure all required documents and forms are available and complete when reviewing and processing backorders., • Inspect and receive incoming materials and products from subcontractors, vendors, and platers, checking for accuracy, quality, and conformity to requirements., • Handle all rejected parts from subcontractors, vendors, and platers, and coordinate with the Quality Engineering department to obtain approval and disposition for all non-conforming items., • Enter accurate receiving data into the computer network and maintain up-to-date records of incoming materials., • Perform physical counts of parts and materials as required, both prior to shipping and upon receipt from subcontractors, vendors, and platers., • Support general warehouse activities such as labeling, picking, packaging, wrapping pallets, moving skids, and maintaining a clean and orderly work area., • Use material handling equipment, including forklifts and pallet jacks, to move products safely and efficiently within the facility., • Maintain a strong focus on attention to detail throughout all shipping and receiving operations to prevent errors and ensure data accuracy., • Collaborate effectively with team members and other departments to support smooth workflow and continuous improvement in shipping and receiving processes.Essential Skills, • Proven experience in shipping and receiving operations, including labeling, warehouse inventory, packaging, and picking., • Strong computer literacy with the ability to work extensively (approximately 80% of the time) on computers for data entry, documentation, and communication., • Proficiency with Microsoft Office Suite, including Excel, and the ability to manage emails and other electronic documentation., • Ability to perform physical tasks (approximately 20% of the time), such as wrapping pallets, moving skids, sweeping floors, and lifting UPS and FedEx boxes., • High level of attention to detail in all aspects of shipping and receiving to ensure accurate documentation, counts, and compliance with customer requirements., • Demonstrated physical stamina, with the ability to remain on your feet for the majority of the shift., • Experience working in a warehouse environment, including handling inventory and packaging activities., • Forklift experience, with the ability to obtain on-site licensing as required., • Ability to regularly lift 30–40 lbs and handle materials safely., • Strong problem-solving skills to address issues related to shipments, inventory discrepancies, and non-conforming materials., • Detail-oriented mindset with a focus on accuracy and quality., • Ability to work effectively as part of a team and contribute to a collaborative work environment., • Experience or exposure to supply chain management processes is highly beneficial.Additional Skills & Qualifications, • Experience with material handling equipment such as forklifts and pallet jacks., • Familiarity with manufacturing or industrial environments, including exposure to heavy equipment and related noise levels., • Comfort working with interactive diagrams and written instructions to follow standardized processes., • Background or interest in supply chain management and logistics., • Strong communication skills to work closely with supervisors, managers, and cross-functional teams., • Willingness to participate in on-the-job training and coaching to develop skills and advance within the organization.Why Work Here? You will join a rapidly growing organization that offers meaningful opportunities for advancement and professional development. The company provides paid holidays, paid time off, and sick time, supporting a healthy work-life balance. Employees benefit from a well-maintained facility with excellent lighting, interactive diagrams, and clear instructions in every department to support success on the job. The organization plays a leading role in a nationally recognized battery power technology hub, working closely with local partners to drive innovation and economic growth in the Binghamton area. The company is actively involved in the community and is committed to keeping manufacturing strong in the region. You will work with an approachable training and coaching staff who are genuinely invested in your growth and success. The culture emphasizes treating all employees like family, whether they join directly or through an agency, and regularly recognizes team members through appreciation events such as picnics, catered lunches, and access to an advanced, self-service cafeteria. Work Environment This role is based in a manufacturing facility in Binghamton, NY, operating on a 1st shift schedule from 6:00 a.m. to 2:30 p.m. The environment includes exposure to heavy equipment, machinery, and corresponding noise levels typical of a production setting. The position requires frequent walking, standing, bending, squatting, and continuous movement throughout the shift. Employees must be able to lift up to 50 lbs as needed and regularly handle loads in the 30–40 lb range. The facility is well maintained with excellent lighting and organized work areas, supporting safe and efficient operations. You will use computers extensively for data entry and documentation, as well as material handling equipment such as forklifts and pallet jacks for moving products and materials around the warehouse and production areas. Job Type & Location This is a Contract to Hire position based out of Binghamton, NY. Pay and Benefits The pay range for this position is $20.00 - $22.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Binghamton,NY. Application Deadline This position is anticipated to close on May 28, 2026. About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Take your mechanical skills on the road — and be the person customers rely on. Also searching: diesel mechanic, heavy equipment mechanic, field service technician, used equipment mechanic $27 – $37/hour + Up to $8,000 Sign-On Bonus Hourly pay — you’re paid for every hour worked (not flat rate) Schedule: Monday–Friday, 8:00 AM – 4:30 PM (with overtime opportunities as needed) At Thompson & Johnson Equipment, our mechanics don’t sit in a shop all day — they’re out in the field solving problems, helping customers, and making a real impact. We’re looking for an experienced Forklift Mechanic / Technician to join our team in the Binghamton area. This is a road position, meaning you’ll work independently, travel locally, and take ownership of your day. What You’ll Do • Diagnose, troubleshoot, and repair forklifts and material handling equipment (electric, gas, and diesel), • Perform planned maintenance and safety inspections, • Use computer-based diagnostics and OEM resources to identify and resolve issues, • Manage and maintain your service van inventory, • Communicate directly with customers to explain repairs and recommend solutions, • Complete work orders accurately and on time, • Deliver quality work — fix it right the first time, • BE A HERO What Makes This Role Different • Road-based work – no shop environment, • Variety – different customers and challenges every day, • Local travel – serving the Binghamton and surrounding region, • Consistent weekday schedule — home most nights, • Hourly pay structure — no flat rate pressure What You Bring • Minimum of 2 years of mechanical training and or experience (forklifts, heavy equipment, automotive, diesel, etc.), • Strong troubleshooting and diagnosing skills across hydraulic, electrical, and mechanical systems, • Ability to work independently with minimal supervision, • Solid communication and customer service skills, • Valid driver’s license with a clean driving record, • Willingness to work overtime as reasonably needed What We Offer • $27 – $37/hour based on experience (hourly — no flat rate), • Up to $8,000 sign-on bonus, • Company-provided service van, tablet, phone, uniforms, • Paid training + OEM certifications Benefits that actually make a difference: • Medical insurance as low as $5/week + FREE vision, • Dental, life, and supplemental coverage such as LTD, STD, Specified Disease like Cancer, Heart, Stroke and Kidney insurance, • 401(k) with 50% company match (up to 5%), • Generous PTO + holidays (extra for Veterans) Additional perks: • $500 annual tool allowance, • $600 annual well-being reimbursement, • $200 annual gym membership, • $100 annual boot allowance, • $100 annual company clothing allowance Why Thompson & Johnson? We’re a third-generation, family-owned company serving Upstate NY with a reputation for taking care of both our customers and our employees. • Average employee tenure: 10+ years, • Voted a Best Places to Work company by our employees (8 years running), • A culture built on teamwork, respect, and doing things the right way This is a place where mechanics build long-term careers and get promoted into service writers, lead techs, mentors, coaches, trainers, managers — not just punch a clock. Work Environment This is a hands-on, physical role requiring lifting, climbing, and working indoors and outdoors in all seasons. Prerequisites Profile assessment, physical (including eye, hearing and lead test) and drug testing for illegal substances. Apply Today If you’re an experienced mechanic who takes pride in your work and enjoys solving problems independently — we’d love to talk! Thompson & Johnson is an Equal Opportunity/Affirmative Action Employer, (M/F/D/V) All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

Job Description Location: BINGHAMTON, NY Salary: $85,000 - $90,000 At over 300 college & universities around the country, Chartwells Higher Education is re-inventing the on-campus dining experience. We are challenging the norm and setting new standards by investing in high-tech, food-infused social spaces that bring people together to promote meaningful relationships and interactions. We are food-forward difference makers, bound together by a desire to feed hungry minds and prepare students for success. We are seeking hungry, humble and smart associates who are looking to join and grow with a diverse organization. We invite you to start your career journey with us and look forward to hearing from you. Job Summary As Controller for one of our multi-faceted client locations, the successful candidate should possess savvy business skills, be a highly motivated professional, with proven ability to establish excellent working relationships with various team members. Additional responsibilities include but not limited to the following: Key Responsibilities: • Responsible for all cash handling procedures, • Perform reconciliation and analysis for several balance sheet accounts, • Analyze financial results for both internal and external use, • Track and maintain monthly P/L and balance sheet activity, • Develop forecasts and budgets, identifying risks and opportunities, • Review of general ledger and balance sheet, • Resolving various accounting/reconciliation issues, • Financial reports: monthly, quarterly and annual reports, including but not limited to monthly and fiscal close, internal and external audit reporting, report preparation and distribution, • Maintain inventory and cost control procedures, • Payroll and Human Resources administration, • Performs related duties and special projects as assigned Preferred Qualifications: • Bachelor’s degree in Accounting preferred, or equivalent professional experience, • A minimum of 5 years’ experience with revenue control, financial reporting and cash handling responsibilities, at least 3 years in a similar capacity, • Accounting experience in foodservice or retail industry required, foodservice operations experience a plus, • Experience with sales analysis and reporting, • Adept at planning, organizing and controlling complex processes as well as analyzing moderately complex financial information, • Excellent verbal and written communication skills, • Skilled at managing multiple priorities and relationships, • Computer skills: proficient in Microsoft Office with a concentration in Excel. POS experience a plus, • Strong analytical and organizational skills Apply to Chartwells Higher Education today! Chartwells Higher Education is a member of Compass Group USA Click here to Learn More about the Compass Story Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. Applications are accepted on an ongoing basis. Chartwells Higher Ed maintains a drug-free workplace. Associates at Chartwells Higher Ed are offered many fantastic benefits. • Medical, • Dental, • Vision, • Life Insurance/ AD, • Disability Insurance, • Retirement Plan, • Paid Time Off, • Holiday Time Off (varies by site/state), • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs), • Paid Parental Leave, • Personal Leave Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. https://www.compass-usa.com/wp-content/uploads/2023/08/2023WageTransparencyChartwellsHED.pdf Certain positions may require Florida Level 2 background screening. Details: https://info.flclearinghouse.com/ Req ID: 1531026 Chartwells HE KRISTINA MCCARTHY [[req_classification]]

Job Description Triple Cities Metal Finishing is currently seeking a Production Racker to join our team. As a Production Racker you will play a crucial role in maintaining quality, safety, and productivity through a hands-on approach. Specifically, the role focuses on reading a work order to racking and unracking before and after subsequent processes such as anodize or paint, as well as packaging parts for shipment. Additionally, this role offers a fantastic opportunity to work directly with our skilled Painters & Powder coaters, with a clear path for career advancement and professional growth. About Us: Triple Cities Metal Finishing provides a wide variety of surface finishing options to a multitude of industries including aerospace, agricultural, automotive, computer, electronics, household, industrial, medical, military, construction, and office parts. We are ISO 9001:2015, AS9100D & NADCAP Certified! Since 1945, TCMF has made innovative, as well as necessary changes in the way we conduct everyday business. From advanced surface preparation to highly technical finishing processes, we can handle the smallest pieces to large parts over 30 feet long. Our three shifts of skilled professionals in our 125,000 square foot facility have made us the vendor of choice for metal finishing for Northeastern United States. Whether it is electroplating, electroless plating, wet paint, or powder coat, we finish it right the first time! Position Overview • Racking and Unracking Parts:, • Reading work orders to determine how to place or hang metal parts on racks or hooks to prepare them for various finishing processes, such as plating, anodizing, powder coat or wet paint., • Racking items strategically to maximize coating coverage and minimize waste., • Distributing items evenly on the rack to maintain stability during transport and coating., • Unracking parts after processing., • Efficiency and Productivity:, • Keeping up in a fast-paced environment by ensuring that the painters & powder coaters have parts racked and ready for processing continuously without delay., • Prioritizing items based on production schedules and deadlines., • Filling racks efficiently without compromising coating quality., • Quality Control:, • Inspect parts before and after the finishing process to ensure they meet quality standards and reporting any defects or non-conformances to supervisors., • Packaging:, • Package completed parts by following customer specifications, prints and guidelines to ensure proper packing of parts., • Job Monitoring:, • Utilize computer system to track job progress and scan in and out of jobs., • Collaboration:, • Team Communication: Coordinate with painters, anodize operators, or other production team members to ensure smooth workflow during subsequent processes., • Feedback Loop: Provide feedback on racking challenges or improvements to enhance efficiency., • Safety and Compliance:, • Personal Protective Equipment (PPE): Wear appropriate PPE (gloves, safety glasses) to protect against chemicals and sharp edges., • Work Area Safety: Maintain a safe work environment, especially when handling chemicals or using cutting tools. Qualifications: • Education:, • High School Diploma or Equivalent is preferred., • Skills & Competencies:, • Attention to Detail: Keen eye for detail and accuracy., • Communication: Clear communication is essential for reporting findings and collaborating with production teams., • Problem-Solving: Ability to identify issues and recommend solutions., • Technical Skills: Basic math and computer skills, ability to use specialized testing tools and machinery., • Physical Requirements: Ability to stand for extended periods, as well as lift up to 50lbs, bend, push, pull, reach and twist for 8-10 hours a day., • Quality Standards: Ensure all products and parts meet stringent quality standards. Shift Hours: • 3rd Shift: Sunday– Thursday 10:00pm-6:30am Total Compensation Package: • Wage, • $16.50+ per hour + $2/hour shift differential!, • Compensation depends on the selected candidate's experience., • Benefits - We recognize the value of a comprehensive benefits package and work vigorously to ensure our package meets the needs of our employees and their families. Eligible employees can elect and participate in variety of benefits including:, • Paid Holidays, • Paid Vacation / Sick Time, • 401 (k) Retirement Plan with Company Match, • Medical, Dental & Vision Insurance, • Employee Assistance Program (EAP), • Health Savings Account (HSA), • Company Paid Life Insurance, • Voluntary Insurance Benefits including Disability Insurance, Accident Insurance, Cancer Insurance, Critical Illness Insurance, Hospital Indemnity Insurance and Life Insurance, • Free Fountain Soda Machine On-site! Triple Cities Metal Finishing is an Equal Opportunity Employer. We provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description Triple Cities Metal Finishing is currently seeking a Production Racker to join our team. As a Production Racker you will play a crucial role in maintaining quality, safety, and productivity through a hands-on approach. Specifically, the role focuses on reading a work order to racking and unracking before and after subsequent processes such as anodize or paint, as well as packaging parts for shipment. Additionally, this role offers a fantastic opportunity to work directly with our skilled Painters & Powder coaters, with a clear path for career advancement and professional growth. About Us: Triple Cities Metal Finishing provides a wide variety of surface finishing options to a multitude of industries including aerospace, agricultural, automotive, computer, electronics, household, industrial, medical, military, construction, and office parts. We are ISO 9001:2015, AS9100D & NADCAP Certified! Since 1945, TCMF has made innovative, as well as necessary changes in the way we conduct everyday business. From advanced surface preparation to highly technical finishing processes, we can handle the smallest pieces to large parts over 30 feet long. Our three shifts of skilled professionals in our 125,000 square foot facility have made us the vendor of choice for metal finishing for Northeastern United States. Whether it is electroplating, electroless plating, wet paint, or powder coat, we finish it right the first time! Position Overview • Racking and Unracking Parts:, • Reading work orders to determine how to place or hang metal parts on racks or hooks to prepare them for various finishing processes, such as plating, anodizing, powder coat or wet paint., • Racking items strategically to maximize coating coverage and minimize waste., • Distributing items evenly on the rack to maintain stability during transport and coating., • Unracking parts after processing., • Efficiency and Productivity:, • Keeping up in a fast-paced environment by ensuring that the painters & powder coaters have parts racked and ready for processing continuously without delay., • Prioritizing items based on production schedules and deadlines., • Filling racks efficiently without compromising coating quality., • Quality Control:, • Inspect parts before and after the finishing process to ensure they meet quality standards and reporting any defects or non-conformances to supervisors., • Packaging:, • Package completed parts by following customer specifications, prints and guidelines to ensure proper packing of parts., • Job Monitoring:, • Utilize computer system to track job progress and scan in and out of jobs., • Collaboration:, • Team Communication: Coordinate with painters, anodize operators, or other production team members to ensure smooth workflow during subsequent processes., • Feedback Loop: Provide feedback on racking challenges or improvements to enhance efficiency., • Safety and Compliance:, • Personal Protective Equipment (PPE): Wear appropriate PPE (gloves, safety glasses) to protect against chemicals and sharp edges., • Work Area Safety: Maintain a safe work environment, especially when handling chemicals or using cutting tools. Qualifications: • Education:, • High School Diploma or Equivalent is preferred., • Skills & Competencies:, • Attention to Detail: Keen eye for detail and accuracy., • Communication: Clear communication is essential for reporting findings and collaborating with production teams., • Problem-Solving: Ability to identify issues and recommend solutions., • Technical Skills: Basic math and computer skills, ability to use specialized testing tools and machinery., • Physical Requirements: Ability to stand for extended periods, as well as lift up to 50lbs, bend, push, pull, reach and twist for 8-10 hours a day., • Quality Standards: Ensure all products and parts meet stringent quality standards. Shift Hours: • 1st Shift: Monday – Friday 6:00am-2:30pm Total Compensation Package: • Wage, • $16.50+ per hour, • Compensation depends on the selected candidate's experience., • Benefits - We recognize the value of a comprehensive benefits package and work vigorously to ensure our package meets the needs of our employees and their families. Eligible employees can elect and participate in variety of benefits including:, • Paid Holidays, • Paid Vacation / Sick Time, • 401 (k) Retirement Plan with Company Match, • Medical, Dental & Vision Insurance, • Employee Assistance Program (EAP), • Health Savings Account (HSA), • Company Paid Life Insurance, • Voluntary Insurance Benefits including Disability Insurance, Accident Insurance, Cancer Insurance, Critical Illness Insurance, Hospital Indemnity Insurance and Life Insurance, • Free Fountain Soda Machine On-site! Triple Cities Metal Finishing is an Equal Opportunity Employer. We provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job DescriptionDescription: GENERAL JOB DESCRIPTION The Shipping Associate is responsible for picking, packing, and shipping customer orders while supporting production operations as needed. This position plays an important role in ensuring both production and shipping activities are completed accurately, safely, and on schedule. The role requires flexibility to work across departments based on business needs and production priorities. PRIMARY DUTIES AND RESPONSIBILITIES Shipping Duties -Pick, pack, and prepare finished goods for shipment according to work instructions and customer requirements. -Create packing lists and export documentation as needed. -Verify shipment accuracy, including product, quantities, labeling, and documentation. -Maintain organized shipping and staging areas. Production Duties -Assist with packaging and labeling operations in a production environment. -Operate production equipment and machinery according to training and SOPs. -Conduct quality inspections to verify products meet company specifications and standards. -Follow standard operating procedures, quality guidelines, and workplace safety requirements. SECONDARY DUTIES AND RESPONSIBILITIES -Cross-train and work in other departments as needed. -Communicate production or shipping issues to supervisors. -Maintain a clean and organized work area following 5S principles. -Work overtime as needed to meet customer delivery schedules. Requirements: QUALIFICATIONS FOR THE JOB Education: -High School diploma or GED. Experience: -Two to three years of experience in shipping, receiving, or manufacturing preferred. KNOWLEDGE, SKILLS, ABILITIES AND COMPETENCIES 1.A high level of flexibility with job functions and ability to accept change. 2.Ability to research, analyze and problem solve. 3.Good communication skills, written and verbal. 4.Ability to read and understand documents and procedures. 5.Ability to work independently using good judgement and problem-solving skills. 6.Ability to work well with others in a fast-paced environment. 7.Demonstrated ability to use basic math skills. 8.Must be conscientious and have a high level of attention to detail. 9.Good organizational and time management skills 10.Basic computer skills, MS Word, Excel and Outlook 11.Works with a sense of urgency 12.Ability to learn new programs. 13.Ability to remain calm in stressful situations. 14.Able to work overtime as needed to ensure on time delivery. Monday – Friday | 8:00 am – 4:30 pm | $17 - $19 per hour | Binghamton, NY TeamWorld, Inc. offers a competitive benefits package including health, dental, and vision insurance, paid time off, paid holidays, 401(k) with company match, and additional voluntary benefits.

Job Description The Member Satisfaction Specialist will work within the Social Care Network (SCN) Team in the Southern Tier region of New York and will have direct responsibility for member satisfaction. This position reports to the Network Operations Manager. Essential Functions: • Oversee and manage SCN member experience, demonstrating proficiency in understanding how social care service delivery is operationalized at the ground level, and how that impacts member satisfaction., • Facilitate the design, development and implementation of the SCN member experience survey to continuously incorporate member feedback and ensure timely and high-quality services are delivered from screening to service completion., • Lead an internal cross-departmental customer experience team, focused on the iterative refinement of data-driven workflows to produce optimal survey delivery which includes multiple delivery channels., • Collaboratively inform, manage and refine member experience dashboards within the survey platform to analyze survey results and demographic data to create action plans focused on improving service quality, accessibility and inclusivity as needed., • Charter, manage and convene an advisory committee/taskforce to support the analysis and review of member experience survey and develop approaches to action feedback (monthly)., • Facilitate performance related discussions, including the creation/development of appropriate performance related tools such as scorecards, performance improvement plans (PIP), etc. (both individually and in collaboration with other key team members) to support continuous improvement and increase service quality., • Manage all applicable vendor and contractual requirements to ensure seamless survey delivery and performance results, as aligned with SCN programmatic requirements., • Complete all performance reporting associated with member satisfaction processes, including member experience, and member complaints. Minimum Requirements: • Education: Bachelor’s degree required or 5 years equivalent experience in customer satisfaction or related field., • Proven experience in leading cross-functional stakeholder teams to develop/execute action plans and drive data-driven performance., • Proficiency in the facilitation, implementation and measurement of continuous improvement strategies, including member satisfaction and experience., • Proficient in planning, prioritization & time management with the ability to work independently with minimal supervision., • Ability to utilize critical thinking skills and propose creative solutions to complex challenges., • Possesses strong professional, organizational and communication skills (written and verbal)., • Experience in facilitating meetings, including in person or via virtual platforms such as zoom., • Demonstrated experience with computer programs such as Microsoft Outlook, Microsoft Office (Word, Excel, PowerPoint, etc.). Preferred Requirements: • Proven experience in creating, developing and management customer/patient satisfaction surveys, including applicable survey platforms (Smartsheet, Qualtrics, Survey Monkey, etc.), • Experience in project management, including applicable certifications (CAPM, PMP, etc.) Work Environment: Care Compass Network utilizes a hybrid work model where employees are able to work remotely from a home office or from the Care Compass office, a non-clinical professional office setting. Local/regional travel required. Benefits: • Outstanding benefits package (medical, dental, vision plus much more!), • 401(k) with match, • Competitive wages, • 14 paid holidays, paid time off (vacation, personal and sick time)

Job DescriptionSalary: $32-33 per hour In partnership with the United States Department of Agriculture (USDA) Natural Resource Conservation Service (NRCS), ELYON International is recruiting Engineering Technicians in New York state. The ELYON Engineering Technician (Civil) will be an integral part of the NRCS Team and provide support for a variety of programs, projects, and special tasks. Work must be completed in accordance with NRCS policies, guides, and the state Field Office Technical Guide (FOTG). The anticipated workload will require working outdoors in the field, in the office, and other business locations and environments. • Duties shall include but not be limited to:, • Assisting agency staff with project planning, documentation and implementation both in the office and in the field. • Inventorying and evaluating potential new project sites to support conservation practice systems. • Assist and complete required engineering surveys to support future designs and construction project layout. • Assisting with development of engineering design calculations, drawings, specifications, cost estimates, asbuilts, etc. • Assist and complete construction inspection of construction projects during construction and report findings to the appointed government representative or responsible NRCS employee. • Evaluate and assist with evaluating construction materials to verify that they meet or exceed specifications this shall occur during construction activities but shall also include going to rock quarries to verify required material size requirements and material quality requirements. • Develop, maintain, and complete construction project job diaries as required., • Communicate daily, or as needed with NRCS employees, the design approver, owner and others on construction projects for progress updates, project coordination, potential problems, substandard construction work, potential needs for contract design, cost, or specification modifications. • Keep track of ongoing quantities for construction projects, and make NRCS employees, the design approver, owner and others aware of potential quantity overruns. • Assisting with non-inherently governmental and non-sponsor paperwork processing and activities • Verify that all construction projects assigned are following the required construction specifications and are following all required permit regulation requirements and keep files that document these activities, including but not limited to manufacturers material specifications, quality of construction work, equipment breakdowns, substandard materials, OSHA construction safety violations, regulatory permit violations, material testing results, communications with contractors, landowners, agency personnel, material providers, regulatory personnel, local unit of government Sponsors, NRCS employees, the design approver, owner, other appointed Construction Inspectors, various county and district employees, and others • Provide documentation that is accurate and complete, this will require the gathering of information, recording of data, establishing and maintaining files, and transmitting the information in the required format to the appropriate personnel. • Contractor employee shall have a working knowledge of AutoCAD Civil 3d 2016, or similar technical and agency software, and the capability to be trained on such technical and agency software to improve skills. Actual experience and formal educational training are desirable when available. • Contractor employee shall with appropriate guidance develop and complete engineering drawings, modify AutoCAD Civil 3d 2016 drawings to the point of completing many standardized NRCS drawings, modify and develop new drawings when needed. The Contractor employee will interpret these and other construction drawings and 9 specifications, explain these interpretations to contractors, landowners, agency personnel, material providers, regulatory personnel, local unit of government Sponsors, NRCS employees, other Construction Inspectors, and various county, district employees and others. • Contractor employee will, after appropriate training and support on agency equipment, be able to independently download survey data, and produce contour maps/drawings when needed. Contractor employee shall be able to analyze data to produce surfaces, profile views and sections views from the surveyed data. • Contractor employee will review and provide comments to NRCS staff on construction drawings and specifications developed by NRCS or others when needed to verify technical adequacy and accuracy of the materials and documents in question. • Contractor employee will have either a working knowledge of or the willingness and capability to be trained on a variety of surveying equipment. Contractor employee shall use and troubleshoot setup problems for various forms of surveying equipment, self levelling levels, total station equipment, data collectors, GPS total stations, etc. Following initial training on agency specific equipment, the contractor employee shall be able to independently operate such equipment and will train others on its use. • The Contractor employee will be expected to independently work with agency specific, TEAMS, SharePoint sites, shared drives and computer systems which may require some initial training. • Communicate effectively both verbally and in writing with appropriate contractors, landowners, agency personnel, material providers, regulatory personnel, local unit of government Sponsors, NRCS employees, other Construction Inspectors, various county and district employees and others as needed on all assigned projects. • Much of this work will be conducted outside in various weather conditions, and in various environments. Much of the work will be conducted in and around water bodies. The Contactor employee may expect to be working in wet conditions, on construction sites with numerous pieces of heavy equipment, along state, county, and city roads where traffic will be ongoing, in agricultural areas where wildlife and livestock will be commonly present, around Confined Animal Feeding Operations (CAFOs) where livestock waste will be commonly present, and often being stored, and along very steep slopes. • Contractor employee will have a working knowledge of OSHA rules and regulations for construction projects, shall follow these rules and regulations, and shall inform others present what the regulations are, and when they are not being followed. Observed violations shall be reported to the appropriate project responsible party, government supervisor or other authorized agency government official. Contractor employee shall be provided all necessary personal protective equipment from the Contractor. • Assists with typing, generating, assembling, reviewing, updating, completing, and distributing reports, paper or digital, for inventory, dam assessment, dam inspection, project inspection, quality reviews, progress, and other reports required by any NRCS Program, initiative, database, task order or policy. • Assist with maintenance, repairs, and inspections of motor vehicles, as needed., • Utilizes a variety of computer hardware and software applications and small office machines, NRCS business tools and locally developed Excel spreadsheets and Access databases to extract information needed to develop reports, maintain schedules, track 10 work progress, and complete assignments. The contractor employee shall demonstrate the use of appropriate language to communicate ideas in words and print based on the audience and situation. • Performs duties in a manner supportive of a safe and healthy work environment, and exercises safety precautions when exposed to dangerous objects, chemicals, extreme temperatures, etc. • Contractor employee will assist with preparing training materials, facilities, and tools for streamlining planning, design and implementation processes as assigned. 2To perform the duties of the position, in addition to driving a privately owned vehicle (POV), the Contractor employee may be required to travel via a Government Owned Vehicle (GOV) to other locations, as needed. The employee of the Contractor shall be allowed to use a GOV to travel from the office to established work location to established satellite offices as allowed by the availability of GOVs. The Contractor employee must serve as an incidental motor vehicle operator. This involves the operation of a motor vehicle on both public and private roads during daylight hours and occasionally after dark. A valid state driver's license is required Desired Education: • Minimum experience shall be 1-year similar job experience., • Minimum education shall be a High School degree or equivalent. Required Skills: • Must possess and maintain a valid state issued drivers license., • Proficient in word processing., • Knowledgeable and experienced in drafting software such as AutoCAD Civil 3D 2016 or later., • Knowledgeable and experienced in operating small office machines such as calculators, fax machines, scanners and copy machines., • Must be skillful in working and communicating with the general public., • Must possess basic telephone and email skills., • All contractor employees must read, write, speak and understand English fluently., • Demonstrates knowledge and support of the Equal Opportunity and Civil Rights policy., • Performs all duties in a manner that consistently demonstrates fairness, cooperation and respect toward co-workers, office visitors and all others in the performance of official business., • Provides technical assistance proportionately without regard to race, color, national origin, sex, religion, age, disability, military or veteran status, sexual orientation, marital or family status, political belief, parental status, or other protected status., • Must be able to pass a Government Security Clearance and background check, • Must be capable of working independently., • Knowledgeable and experienced in general office procedures, such as preparing reports, spreadsheets and filing., • Must be able to utilize Microsoft Outlook for email and calendars and internet browsers such as Internet Explorer, Google Chrome and Microsoft Edge, • Knowledgeable and experienced with: interpreting plans and specifications, preparing project cost estimates, conducting basic surveys, construction inspection, construction site safety., • Knowledgeable and experienced in utilizing a variety of computer hardware and software applications, such as Microsoft Windows, Word, Excel, PowerPoint, TEAMS, Adobe Acrobat Professional. Benefits: • Medical, Dental, Vision, Short Term Disability, Workers Compensation and Life Insurance, • 11 Paid Federal Holidays, • 56 Hours of paid Sick Leave per calendar year, • 80 Hour of Vacation after 1 year of service

Job DescriptionPeoplelink Staffing Solutions is hiring a Quality Technician in partnership with a client in the Endicott, NY area. Preferably with aerospace or geothermal industry experience. Must be proficient in MS Office applications with strong computer skills. Summary 1st Shift: Monday – Friday Pay: $24 - $33 per hour Quality Technician Responsibilities: • Inspect parts, materials, and finished products to confirm they meet required quality standards and specifications., • Use measurement tools such as calipers, micrometers, gauges, and coordinate measuring machines (CMM) to check dimensions and accuracy., • Review and interpret engineering drawings and inspection instructions to understand product requirements., • Document inspection results, measurements, and any quality concerns in reports or internal systems., • Perform inspections on first-run parts, in-process components, and completed products., • Assist in creating and maintaining inspection reports and documentation, including first article inspections., • Identify and report nonconforming materials or products and support investigations to resolve quality issues., • Work with production and management teams to address quality concerns and improve processes., • Verify that suppliers meet company quality and certification requirements., • Assist with internal or external quality audits when needed., • Ensure inspection tools and measuring equipment are functioning properly and calibrated when required., • Support manufacturing initiatives and help identify opportunities to improve efficiency and reduce waste., • Contribute to a culture of continuous improvement and maintain a strong focus on customer satisfaction. Quality Technician Qualifications: • High School Diploma, • Strong computer and data entry skills, with proficiency in Microsoft Office (Outlook, Excel, and Word)., • Prior experience in quality control, manufacturing, or working in a similar environment, • Proficiency in reading and interpreting engineering drawings, geometric dimensioning and tolerancing (GD&T), and inspection standards., • Basic understanding of Quality Management Systems (QMS) and quality control practices., • The ability to troubleshoot issues with CMM equipment, measurement programs, or part quality is critical. Why you should apply…. • Medical insurance -- self and family available, • Dental insurance -- self and family available, • Employee bonus plan, • 401(k) plan w/ discretionary match, • Paid Sick Time Peoplelink Staffing is an Equal Opportunity Employer. We do not discriminate on the basis of race, color, religion, sex (including pregnancy, sexual orientation, and gender identity), national origin, age, disability, genetic information, or any other protected status under federal, state, or local law. We are committed to fostering a diverse and inclusive workplace. #ZIP #IND300 Company DescriptionPeoplelink Staffing Solutions, a leader in the staffing industry for the past 33 years, continues our vision of ‘linking’ communities through employment. Peoplelink’s dedication to the safety, health & well-being of our associates, clients and communities remains to be a #1 priority.Peoplelink Staffing Solutions, a leader in the staffing industry for the past 33 years, continues our vision of ‘linking’ communities through employment. Peoplelink’s dedication to the safety, health & well-being of our associates, clients and communities remains to be a #1 priority.

Job DescriptionDescriptionFood Service Director Full-Time Positions Available. Apply Today! Nursing Home, Senior Living, Hospital, or Healthcare Required! Retention & Longevity Bonuses Available: We reward loyalty and long-term commitment with additiona bonus compensation based on years of service. • $2,500 - After 6 months of service, • $2,900 - After 9 months of service, • $2,500 - After 12 months of service We will provide sanitation certification if you are not already Serve Safe Certified. We are seeking an experienced Food Service Director for our Skilled Long-Term Care Facility in Endicott, NY area to oversee our dining operations and ensure exceptional food service delivery. The ideal candidate will have a strong background in food service healthcare management. Food Service Director Key Duties • Schedule and assign staff, prepare, and process department payroll and new hire paperwork., • Ensure the food service operates within established budgetary guidelines., • Ordering and purchasing., • Knowledge of local, State, Federal regulations, and survey inspection process., • Train, supervise, and evaluate dietary staff, ensuring adherence to food safety and sanitation standards, as well as regulatory compliance., • Oversee the overall sanitation and cleaning of the kitchen, storage and dining areas, and equipment., • Performs other job-related duties. Food Service Director Qualifications • Current ServSafe certification or we will provide upon hire., • Certified Food Manager preferred. Certified Dietary Manager (CDM) certification a plus., • Minimum 2-3 years managing the food service department in long term care facility, hospital, or healthcare setting strongly preferred., • Strong knowledge of large scale and therapeutic food preparation., • Solid leadership and supervisory skills., • Proficiency in basic computer skills, Outlook Email, Microsoft Office, Meal Tracker, OnCare, and Meal Tracker. Food Service Director Benefits • Health, Dental and Vision Insurance, • Patriot Preventive Care - Your Wellness Guardian, • Paid Time Off and Paid Holidays, • Uniform Shirts Provided, • Direct Deposit, • 401K, • Education Reimbursement - $250 Annually, • Paid Orientation and Training, • Opportunities for career advancement#HP123

Job DescriptionDescription: The Risk Advisor, Large Commercial Lines, is responsible for generating new business and expanding client relationships within the property & casualty commercial marketplace. This role focuses on identifying and cultivating large, complex accounts, delivering strategic risk solutions, and partnering with internal resources to provide a superior client experience. The Risk Advisor drives revenue growth through proactive prospecting, strong market expertise, and a consultative sales approach tailored to sophisticated commercial clients. Responsibilities & What You’ll Be Doing • Build and manage a pipeline of large commercial prospects through proactive outreach, networking, and market engagement to achieve sales goals., • Develop tailored risk strategies and insurance solutions for complex commercial clients., • Collect detailed risk and underwriting information including survey data and loss history., • Lead the sales process from prospecting to close, including presentations, proposals, and negotiation., • Strengthen relationships with carriers and underwriting partners to secure competitive program options., • Participation in Sales Team Meetings, workshops, and events expected., • Maintain complete, accurate, and timely CRM entries to ensure full visibility and accountability throughout the sales process., • Collaborate with internal teams, carrier marketing, service, risk management, claims, and specialty practices, etc. to deliver an exceptional client experience., • Develop cross lead opportunities for other products within Smith Brothers., • Maintain strong knowledge of market trends, industry risks, and coverage innovations within large commercial P&C., • Stay informed and help resolve any client issues when needed., • Expand and retain a profitable book of business through ongoing client relationship management., • Actively participate in renewal strategy and client review meetings to support strong retention and ensure clients remain protected, satisfied, and committed year over year., • Represent the agency at industry events, associations, and networking opportunities to drive brand presence and lead generation., • Build and maintain strong relationships with all stakeholders., • Stay current on industry trends, products, and regulatory changes., • Engage in ongoing professional development through internal and external learning and training., • Ensure compliance with agency processes, confidentiality standards, and quality metrics., • Use technology and AI for efficiency, client experience, and culture., • Work on projects and other work as assigned., • Demonstrate alignment with our purpose, values, and culture. Qualifications, Knowledge, Skills, & Abilities, You’ll Bring • 3 - 5+ years of large P & C insurance experience in a sales focused role, preferably at independent agency., • Bachelor’s degree in business, finance, risk management, or related field preferred; high school diploma or equivalent required., • Active Property & Casualty Insurance license in good standing., • Prior experience in prospecting, building a pipeline, and closing new business., • Experience working with carriers, underwriting, carrier marketing, coverage placement, and service teams., • Knowledge of risk management, insurance products, market dynamics, and consultative sales processes., • Ability to meet goals and objectives., • Strong analytical skills and structured problem solving approach., • Excellent communication, collaboration, interpersonal, and conflict resolution skills., • Strong organization and time management skills., • Ability to influence across levels and build trust with diverse stakeholders., • Ability to handle multiple priorities and work efficiently in a fast paced environment., • Flexibility to adapt to evolving marketplace., • Strong MS Office skills., • Proficient with agency management systems, CRMs, carrier portals, and sales enablement tools., • Proficient with AI and ability to learn new/future technologies and tools., • Commitment to continuous learning and professional development., • Self-motivated, strong work ethic, adaptable, stress tolerance to overcome hurdles., • Team player who consistently defaults to good. General Working Conditions • Dynamic environment with frequent communication via in person, video, and phone., • Offsite client, network, and prospect meetings require non-standard normal working hours – expect evening events and travel as normal course of business., • Ability to view computer monitors for extended periods of time., • Culture rooted in collaboration, integrity, trust, respect, creativity, and fun. Why Smith Brothers Insurance We are a team of professionals who seek to consistently deliver our Be Sure brand promise, contribute to our organization being a great place to work, and work together to be a sustainably relevant company. When you work with Smith Brothers you can be sure our core values, collaborative culture, and expertise will reinforce your decision to partner with us. Our standard of excellence is the internal foundation for treating everyone based on our core values of trust, respect, creativity, and fun – leading to individual fulfillment through group achievement. Smith Brothers Insurance LLC offers competitive salaries and comprehensive benefits and programs including Health, Dental, Vision, Short and Long-term Disability, Life, Long Term Care and 401K with employer match, employee assistance program, licensing and continuing education reimbursement, travel and expense allowance, internal & external meetings, and learning and development opportunities. For more information about our company please visit us at: www.smithbrothersusa.com. Requirements:

Job Description C.H. Thompson is currently seeking a Racker / Sandblaster to join our team. As a Racker / Sandblaster you will play a crucial role in maintaining quality, safety, and productivity through a hands-on approach. Specifically, the role focuses on cleaning, smoothing, and preparing surfaces and reading a work order to rack and unrack parts in preparation for subsequent processes such as anodize, paint or powder coat. Additionally, this role offers a fantastic opportunity to work directly with our Leadership Team, with a clear path for career advancement and professional growth. About Us: C.H. Thompson is a premier one-stop-shop for all of your finishing needs. Our continuous focus on improving quality and increasing productivity has made CH Thompson Finishing a leader in the industry. We offer several services including anodizing, painting, powder coating, intricate masking and silk screening, allowing us to provide multiple finishes on individual parts. We service a multitude of industries including; aerospace, agricultural, automotive, computer, electronics, household, industrial, medical and military. Our customer base ranges from small privately owned machine shops to top Fortune 500 companies such as Lockheed Martin, General Dynamics and BAE Systems. We are also proud to be ISO 9001:2015, AS9100D and NADCAP certified! Position Overview • Sandblasting:, • Remove dirt, paint, grease, rust, and other materials from surfaces using sandblasting equipment., • Autobody:, • Perform autobody work, such as filling, sanding, and priming surfaces., • Racking and Unracking Parts:, • Reading work orders to determine how to place or hang metal parts on racks or hooks to prepare them for various finishing processes, such as plating, anodizing, powder coat or wet paint., • Racking items strategically to maximize coating coverage and minimize waste., • Distributing items evenly on the rack to maintain stability during transport and coating., • Unracking parts after processing., • Efficiency and Productivity:, • Prioritizing items based on production schedules and deadlines., • Quality Control:, • Inspect parts before and after the finishing process to ensure they meet quality standards and reporting any defects or non-conformances to supervisors., • Job Monitoring:, • Utilize computer system to track job progress and scan in and out of jobs., • Collaboration:, • Team Communication: Coordinate with painters, line operators, or other production team members to ensure smooth workflow during subsequent processes., • Safety and Compliance:, • Personal Protective Equipment (PPE): Wear appropriate PPE (gloves, safety glasses) as required for each task to protect against hazards., • Work Area Safety: Maintain a safe work environment, especially when handling chemicals or using cutting tools. Qualifications: • Education:, • High School Diploma or Equivalent is preferred., • Experience:, • Relevant experience in sandblasting is preferred., • Knowledge of surface preparation techniques and autobody work., • Skills & Competencies:, • Attention to Detail: Keen eye for detail and accuracy., • Communication: Clear communication is essential for reporting findings and collaborating with production teams., • Problem-Solving: Ability to identify issues and recommend solutions., • Technical Skills: Basic math and computer skills, ability to use specialized testing tools and machinery., • Physical Requirements: Ability to stand for extended periods, as well as lift up to 50lbs, bend, push, pull, reach and twist for 8-10 hours a day., • Quality Standards: Ensure all products and parts meet stringent quality standards. Shift Hours: • Monday – Thursday 6:30am-3:30pm, • Friday 6:30am-12:30pm Total Compensation Package: • Wage, • $17.50 - $19.50 per hour., • Compensation depends on the selected candidate's experience., • Benefits - We recognize the value of a comprehensive benefits package and work vigorously to ensure our package meets the needs of our employees and their families. Eligible employees can elect and participate in variety of benefits including:, • Paid Holidays, • Paid Vacation / Sick Time, • 401 (k) Retirement Plan with Company Match, • Medical, Dental & Vision Insurance, • Employee Assistance Program (EAP), • Health Savings Account (HSA), • Company Paid Life Insurance, • Voluntary Insurance Benefits including Disability Insurance, Accident Insurance, Cancer Insurance, Critical Illness Insurance, Hospital Indemnity Insurance and Life Insurance, • Free Fountain Soda Machine On-site! C.H. Thompson is an Equal Opportunity Employer. We provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description Triple Cities Metal Finishing is currently seeking a motivated individual to join our maintenance team in an entry-level capacity. This dual-purpose role focuses on maintaining the mechanical integrity of our metal finishing equipment while managing the critical water treatment processes necessary for environmental compliance. This position requires a "hands-on" approach, with a significant portion of the workday spent on the production floor. About Us: Triple Cities Metal Finishing provides a wide variety of surface finishing options to a multitude of industries including aerospace, agricultural, automotive, computer, electronics, household, industrial, medical, military, construction, and office parts. We are ISO 9001:2015, AS9100D & NADCAP Certified! Since 1945, TCMF has made innovative, as well as necessary changes in the way we conduct everyday business. From advanced surface preparation to highly technical finishing processes, we can handle the smallest pieces to large parts over 30 feet long. Our three shifts of skilled professionals in our 125,000 square foot facility have made us the vendor of choice for metal finishing for Northeastern United States. Whether it is electroplating, electroless plating, wet paint, or powder coat, we finish it right the first time! Position Overview • Water Treatment Operations, • System Monitoring: Perform daily inspections of the wastewater treatment system to ensure all pumps, filters, and chemical feeds are functioning correctly., • Testing & Analysis: Conduct routine water sampling and testing (pH levels, metal concentrations, and chemical residuals) to maintain compliance with local and federal environmental regulations., • Chemical Management: Safely handle, mix, and replenish treatment chemicals. Maintain accurate logs of chemical usage and inventory levels., • Sludge Management: Operate filter presses and manage the collection and labeling of hazardous waste containers in accordance with regulatory standards., • Facility & Equipment Maintenance, • Preventative Maintenance (PM): Execute scheduled PM tasks on plating lines, including cleaning tanks, inspecting heaters, and lubricating moving parts., • General Repairs: Assist senior maintenance staff with basic plumbing, electrical troubleshooting, and mechanical repairs of pumps, valves, and ventilation systems., • Safety Compliance: Identify and report workplace hazards such as pinch points, chemical leaks, or faulty equipment. Adhere strictly to Lockout/Tagout (LOTO) procedures., • ERP Integration: Utilize the company's ERP system to log completed work orders and track parts usage. Qualifications: • Communication Skills: Strong verbal and written communication skills., • Physical Requirements: Ability to lift up to 75 pounds, bend, kneel, and climb as needed., • Technical Skills:, • Strong understanding of plumbing systems., • Strong mechanical aptitude and troubleshooting abilities. Shift: • Monday – Friday 7:00am-3:30pm Total Compensation Package: • Wage, • $17.50-$18.50/hour, • Compensation depends on the selected candidate's experience., • Benefits - We recognize the value of a comprehensive benefits package and work vigorously to ensure our package meets the needs of our employees and their families. Eligible employees can elect and participate in variety of benefits including:, • Paid Holidays, • Paid Vacation / Sick Time, • 401 (k) Retirement Plan with Company Match, • Medical, Dental & Vision Insurance, • Employee Assistance Program (EAP), • Health Savings Account (HSA), • Company Paid Life Insurance, • Voluntary Insurance Benefits including Disability Insurance, Accident Insurance, Cancer Insurance, Critical Illness Insurance, Hospital Indemnity Insurance and Life Insurance, • Free Fountain Soda Machine On-site! Triple Cities Metal Finishing is an Equal Opportunity Employer. We provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description C.H. Thompson is currently seeking a Production Inspector to join our team. As a Production Inspector you will play a crucial role in maintaining quality, safety, and productivity through a hands-on approach. Specifically, the role focuses on unmasking (removing protective materials) and performing touch-up paint work. About Us: C.H. Thompson is a premier one-stop-shop for all of your finishing needs. Our continuous focus on improving quality and increasing productivity has made CH Thompson Finishing a leader in the industry. We offer several services including anodizing, painting, powder coating, intricate masking and silk screening, allowing us to provide multiple finishes on individual parts. We service a multitude of industries including; aerospace, agricultural, automotive, computer, electronics, household, industrial, medical and military. Our customer base ranges from small privately owned machine shops to top Fortune 500 companies such as Lockheed Martin, General Dynamics and BAE Systems. We are also proud to be ISO 9001:2015, AS9100D and NADCAP certified! Position Overview • Unmasking: Carefully remove masking materials (such as tape, latex and plugs) from parts after painting., • Inspection: Inspect unmasked areas for any defects or imperfections., • Touch-Up Paint: Apply touch-up paint to correct minor defects (scratches, chips, etc.) in painted finishes. Ensure color matching and consistency., • Quality Assurance: Inspect parts thoroughly for adherence to quality standards. Document inspection results, including any rework or corrections needed., • Collaboration: Coordinate and communicate with the Supervisor to address any issues found during inspection., • Safety and Compliance: Maintain a clean and safe work environment and follow all safety guidelines and protocols. Qualifications: • Education:, • High School Diploma or Equivalent is preferred., • Experience:, • Relevant experience in metal finishing, manufacturing, or a related field is preferred., • Quality Control Experience: Familiarity with quality control processes and standards., • Skills & Competencies:, • Attention to Detail: Keen eye for detail and accuracy., • Communication: Clear communication is essential for reporting findings and collaborating with production teams., • Problem-Solving: Ability to identify issues and recommend solutions., • Technical Skills: Basic math and computer skills, ability to use specialized testing tools and machinery., • Physical Requirements: Ability to stand for extended periods and read technical documents and blueprints., • Quality Standards: Ensure all products and parts meet stringent quality standards. Shift Hours: • Monday - Thursday 6:30am - 3:30pm, Friday 6:30am-12:30pm Total Compensation Package: • Wage, • $17.50+ per hour, • Compensation depends on the selected candidate's experience., • Benefits - We recognize the value of a comprehensive benefits package and work vigorously to ensure our package meets the needs of our employees and their families. Eligible employees can elect and participate in variety of benefits including:, • Paid Holidays, • Paid Vacation / Sick Time, • 401 (k) Retirement Plan with Company Match, • Medical, Dental & Vision Insurance, • Employee Assistance Program (EAP), • Health Savings Account (HSA), • Company Paid Life Insurance, • Voluntary Insurance Benefits including Disability Insurance, Accident Insurance, Cancer Insurance, Critical Illness Insurance, Hospital Indemnity Insurance and Life Insurance, • Free Fountain Soda Machine On-site! C.H. Thompson is an Equal Opportunity Employer. We provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description JOB SUMMARY/OBJECTIVE: The Technician, NPI Engineering 1 will be responsible for building new Cable & Harness products under the guidance of the Engineering Group. Capable of understanding schematics, figuring out dimensions and performing all required manufacturing operations. Must learn how to write a process as you are building a new product to establish Manufacturing production process. To excel in this key role, you must be able communicate clearly. KNOWLEDGE/SKILLS: • Manufacturing experience with technical insight on specific equipment or processes., • Ability to follow verbal instructions and general manufacturing designs/drawings/diagrams., • Computer skills and use of computer programs/software specific to the manufacturing process., • Understands processes and procedures and can recognize non-conformance or problems., • Blueprint Reading Course preferred., • May include other duties as assigned and/or special projects. QUALIFICATIONS - EDUCATION/EXPERIENCE: • Experience with building Cable Assemblies., • Certifications is preferred., • Basic reading, writing and math skills with min high school diploma or equivalent., • IPC 610 / 620 certifications and familiar with ISO 9000 standards., • Typically requires 0-2 years of prior manufacturing and hands-on experience., • Intuitive Software Experience., • Familiar with Computer software with Microsoft Office., • Communicates effectively, both verbally and in writing., • Must be able to work with direction in a team environment., • Perform basic navigation through Customer prints, wiring diagrams and customer supplied documentation to build new products., • Understanding Requirements, Notes & Specs called out on drawings., • Knowledge of tools & many operations., • Ability of taking pictures with approved camera to assist with process writing., • Ability to evaluate and make recommendations on process/product issues., • Ability to Troubleshoot any problems., • Ability to perform required preventative maintenance with direction from engineering., • Accountable for individual results., • Receives detail instructions on all work., • Provides work direction and training to others as requested., • Work within a team environment., • Adaptable and flexible to changing demands and work schedules/assignments., • Knowledge and participation in the 5S Program., • Adheres to established safety practices and quality system requirements. WORK AUTHORIZATION/SECURITY CLEARANCE: • No special clearances required. HOURS: • FULL-TIME WORK PERKS: This company is proud to offer comprehensive benefits options that includes: • Health, Dental, & Vision Insurance, • Life Insurance, • PTO & Paid Holiday, • Long & Short Disability, • 401K, • Exceptional growth opportunity WORK LOCATION: • In person i3/SureScan is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, national origin, age, sex, religion, disability, sexual orientation, marital status, veteran status, gender identity or expression, or any other basis protected by local, state, or federal law. This policy applies regarding all aspects of one’s employment, including hiring, transfer, promotion, compensation, eligibility for benefits, and termination.

Job Description Triple Cities Metal Finishing is currently seeking a Powder Coater to join our 3rd shift team. As a Powder Coater, you will be responsible for applying high-quality powder coatings to a variety of metal parts and products, ensuring a durable and aesthetically pleasing finish. You will play a crucial role in our manufacturing process, contributing to the overall quality and appearance of our goods. About Us: Triple Cities Metal Finishing provides a wide variety of surface finishing options to a multitude of industries including aerospace, agricultural, automotive, computer, electronics, household, industrial, medical, military, construction, and office parts. We are ISO 9001:2015, AS9100D & NADCAP Certified! Since 1945, TCMF has made innovative, as well as necessary changes in the way we conduct everyday business. From advanced surface preparation to highly technical finishing processes, we can handle the smallest pieces to large parts over 30 feet long. Our three shifts of skilled professionals in our 125,000 square foot facility have made us the vendor of choice for metal finishing for Northeastern United States. Whether it is electroplating, electroless plating, wet paint, or powder coat, we finish it right the first time! Position Overview • Prepare parts for the powder coating process by cleaning, degreasing, sanding, and masking as necessary., • Set up and operate powder coating equipment, including spray guns, booths, and ovens, ensuring optimal performance., • Select appropriate powder coatings according to job specifications, color charts, and customer requirements., • Load and unload parts onto coating lines or racks, ensuring proper spacing and orientation for even coating., • Apply powder coatings evenly and efficiently, maintaining consistent thickness and coverage to meet quality standards., • Monitor the coating process, adjusting equipment settings as needed to achieve the desired finish and adhesion., • Cure coated parts in an oven at specified temperatures and times, ensuring proper adhesion and durability of the finish., • Inspect finished parts for defects such as runs, drips, thin spots, or contamination, and perform touch-ups or rework as required., • Troubleshoot equipment malfunctions and perform basic maintenance to ensure efficient operation., • Maintain a clean and organized work area, including the powder coating booth and equipment, adhering to safety regulations., • Follow all safety procedures and wear appropriate personal protective equipment (PPE) at all times., • Maintain records of coated parts, colors used, and any issues encountered., • Collaborate with other team members to ensure efficient workflow and meet production deadlines. Qualifications: • Communication Skills: Strong verbal and written communication skills., • Physical Requirements: Ability to lift and move heavy equipment., • Technical Skills:, • Previous experience as a Powder Coater is preferred., • Knowledge of powder coating techniques, materials, and equipment., • Ability to read and interpret work orders and specifications., • Strong attention to detail and a commitment to quality. Shift: • 3rd Shift: Sunday – Thursday 10:00pm-6:30am Total Compensation Package: • Wage, • $18.00/hour plus a 2nd shift differential., • Compensation depends on the selected candidate's experience., • Benefits - We recognize the value of a comprehensive benefits package and work vigorously to ensure our package meets the needs of our employees and their families. Eligible employees can elect and participate in variety of benefits including:, • Paid Holidays, • Paid Vacation / Sick Time, • 401 (k) Retirement Plan with Company Match, • Medical, Dental & Vision Insurance, • Employee Assistance Program (EAP), • Health Savings Account (HSA), • Company Paid Life Insurance, • Voluntary Insurance Benefits including Disability Insurance, Accident Insurance, Cancer Insurance, Critical Illness Insurance, Hospital Indemnity Insurance and Life Insurance, • Free Fountain Soda Machine On-site! Triple Cities Metal Finishing is an Equal Opportunity Employer. We provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description The Network Performance Specialist – HRSN Screening / Navigation / Care Management will work within the Social Care Network (SCN) Team in the Southern Tier region of New York and will be responsible for managing successful participation and performance of HRSN Screening / Navigation / Care Management services by participating organizations. As a local subject matter expert in this field, this role will integrate continuous improvement in program design, execution and monitoring by helping to identify best practices, promote workflow enhancements, and host stakeholder communications with contracted organizations. This position reports to the Screening & Referral Navigation Manager Essential Functions: • Serves as a regional expert of the 1115 waiver health-related social need (HRSN) screening, navigation, and care management services, working to ensure eligible services are delivered in a timely manner across the Southern Tier region, and provides recommendations that improve enhanced service delivery across a network of community-based organizations (CBOs)., • Maintains enhanced knowledge of the Social Care Navigator roles and responsibilities. Develops and deploys materials for hiring, onboarding, and training to support Social Care Navigators across the Southern Tier region and ensures that navigators are aware of programmatic requirements and best practices to ensure they meet and can maintain the defined readiness criteria., • Seamlessly utilizes the Care Compass Unite Us system in support of social care navigation service delivery (screening, navigation, enhanced care management, and referrals), providing recommendations for system enhancements and consistently integrating continuous improvement., • Maintains a strong understanding of NYS DOH screening, navigation and care management requirements. As needed, supports the development of communications to ensure network participants are aware of requirements and leading practices. Leverages local and national CBO expertise to share best practices for HRSN social care navigation services., • Develop and maintain an urban and rural outreach strategy for HRSN screening, navigation and HRSN care management services., • Directly supports local CBOs to build sustainable capacity and provides tailored support in this area as needed. Regularly coordinates and collects feedback from social care navigators, garnering input on the salient challenges and barriers they are facing and collaborates around productive solutions. Creates and executes timely action plans for identified gaps or deficiencies in this area as needed., • Responsible for managing social care navigator performance, including metric attainment. Provides performance reports (scorecards) to organizations providing social care navigation services in the SCN, utilizing data analysis techniques to convey opportunities for remediation and influence needed workflow changes. As necessary, facilitate training on network/CBO performance improvement and performance monitoring. MINIMUM REQUIREMENTS: • Education: Bachelor’s degree required and at least 3-5 years’ experience managing projects., • Experience with either screening, navigation, or case management activities, ideally with low-income or Medicaid individuals., • Ability to work in a high pace environment and with the ambiguity & change that comes with a new program., • Consistently utilizes critical thinking skills to resolve issues/challenges in workflows, generate process maps, and manages program performance., • Ability to convey complex or technical information in a manner that others can understand, and ability to understand and interpret complex information from others., • Results-driven and client-focused., • Skilled with personal computer programs such as Microsoft Outlook, Microsoft Office (Word, Excel PowerPoint, etc.), • Facilitation of meetings either in person or via virtual platforms such as Zoom. WORK ENVIRONMENT: Care Compass Network utilizes a hybrid work model where employees are able to work remotely from a home office or from the CCN office, a non-clinical professional office setting. There may be some travel required for partner and/or network meetings. BENEFITS: • Outstanding benefits package (medical, dental and vision, plus much more!), • 401(k) with match, • Competitive wages, • 14 paid holidays, paid time off (vacation, personal and sick time)

Job DescriptionDescription: The Account Executive, Medicare, is responsible for the sales and ongoing service of Medicare business in accordance with CMS and carrier guidelines. This role manages a book of business that includes an assigned portfolio upon hire and grows the book through new sales, referrals, and retention efforts. The Account Executive serves as a trusted advisor to clients, guiding plan options, enrollment, renewals, and ongoing support while ensuring compliance, accuracy, and an excellent client experience Responsibilities & What You’ll Be Doing • Manage a book of clients, including an assigned portfolio and new self-produced business., • Successfully meet established annual sales and retention goals., • Drive sales growth through outreach, referrals, rounding, cross-sell efforts, and lead follow-up., • Manage full client lifecycle, including quoting, cost analysis, proposals, enrollment, changes, renewals, and service., • Educate clients on plan options, networks, prescriptions, subsidies, and key enrollment deadlines., • Support service needs, i.e., billing, ID cards, escalations, coverage verification, and basic claims help., • Provide health provider network and pharmacy formulary support for book of business., • Conduct Medicare sales presentations and educational presentations for internal and external groups., • Maintain accurate, compliant documentation and activity within CRM/agency systems., • Partner with carriers and internal teams to resolve issues and ensure timely follow-through., • Track and manage pipeline activity, including quoting, conversions, retention, and revenue goals., • Deliver a strong client experience through responsive communication and proactive renewals., • Stay current on product changes, carrier requirements, compliance updates, and market trends., • Follow department and agency defined processes, procedures, and workflows., • Utilize the agency management system for daily activities, documentation, and assigned tasks., • Participate in internal training sessions as well as carrier system training., • Review, update, and help develop processes and workflows as needed., • Ensure compliance with agency processes, confidentiality standards, and quality metrics., • Work on projects and other work as assigned., • Engage in ongoing professional development through internal learning and training., • Effectively use MS Office, standard office applications, and other technologies., • Skillfully use AI tools (Copilot, ChatGPT, etc.) to aid work and efficiency., • Work effectively with all team members, provide backup support, and contribute to team collaboration., • Demonstrate alignment with our purpose, values, and culture. Qualifications, Knowledge, Skills, & Abilities, You’ll Bring • 2+ years of Medicare insurance experience in sales position desired., • Life & Health license in good standing and willing to become licensed per state requirements., • CMS registered agent in good standing and willingness to maintain., • AHIP and carrier certification in good standing., • College Degree preferred. High school diploma or equivalent (GED) required., • Professional designation is a plus., • Must obtain/maintain annual Medicare certifications., • Experienced in Medicare sales and service with proven record of building and servicing book of business., • Deep knowledge and experience in navigating constantly changing CMS rules and procedures., • Ability to handle high pace during Annual Enrollment Period(s)., • Ability to create opportunities and close business outside of AEP windows., • Strong consultative selling skills with the ability to simplify and recommend appropriate coverage options., • Excellent service skills, delivering support with empathy, professionalism, and a client-first approach., • Ability to manage high-volume workflows while balancing sales and service priorities., • Strong attention to detail and accuracy in applications, documentation, and compliance requirements., • Strong communication skills with the ability to build trust quickly and explain coverage confidently., • Organized and self-directed, able to prioritize, meet deadlines, and maintain consistent pipeline activity., • Team-oriented, collaborative, accountable, and willing to share knowledge and best practices., • Growth mindset with commitment to continuous learning, product knowledge, and improving sales/service effectiveness., • Stay relevant/ahead on industry insights and familiarity with the Medicare marketplace., • Ability to manage multiple priorities in a fast-paced environment., • Flexibility and willingness to take on additional work and projects assigned., • Ensure compliance with agency processes, confidentiality standards, and quality metrics., • Strong MS Office skills, experience with agency management systems, and carrier platforms., • Proficient with AI tools, AI assisted workflows, and ability to learn new/future technologies and tools., • Committed to continuous learning and professional development., • Self-motivated, strong work ethic, adaptable, stress tolerance to overcome hurdles., • Team player who consistently defaults to good. General Working Conditions • Fast paced environment with significant telephone and in person interactions., • Some travel and non-standard working hours may be required., • Ability to view computer monitors for extended periods of time., • Culture rooted in collaboration, integrity, trust, respect, creativity, and fun., • Flexible Work Environment. About Smith Brothers Smith Brothers Insurance has been in business for over 50 years, as an independently operated, Top 100 National Broker, focused on our purpose of Helping Others. We are multi-disciplined with expertise in Commercial Lines, Personal Lines, Employee Benefits, Surety, Group Retirement Plans including 401(k) and 403(b) Plans, Risk Management, and Financial Services. We offer competitive salaries and comprehensive benefits package, including health, dental, vision, short-term and long-term disability, life, long-term care, 401(k) with employer match, employee assistance program, licensing and continuing education reimbursement, paid time off, paid holidays, flexibility, and more. Learn more at www.smithbrothersusa.com. This job description is only a summary of the typical functions of the job, not an exhaustive or comprehensive list of all possible responsibilities, tasks, and duties. Duties, responsibilities, and activities may change at any time with or without notice, based on business needs. This description does not constitute a contract of employment, and we reserve the right to revise the job description and/or require other tasks to be performed as circumstances change.Requirements:

Job Description No experience? No problem! No experience required! Our experienced team members will train you! Triple Cities Metal Finishing is currently seeking a skilled and dependable Production Laborer to join our dynamic team and support our production operations. About Us Triple Cities Metal Finishing provides a wide variety of surface finishing options to a multitude of industries including aerospace, agricultural, automotive, computer, electronics, household, industrial, medical, military, construction, and office parts. We are ISO 9001:2015, AS9100D & NADCAP Certified! Since 1945, TCMF has made innovative, as well as necessary changes in the way we conduct everyday business. From advanced surface preparation to highly technical finishing processes, we can handle the smallest pieces to large parts over 30 feet long. Our three shifts of skilled professionals in our 125,000 square foot facility have made us the vendor of choice for metal finishing for Northeastern United States. Whether it is electroplating, electroless plating, wet paint, or powder coat, we finish it right the first time! Position Overview Responsibilities May Include: • Assist with setting up, operating, and monitoring machinery and chemical tanks., • Prepare and transport materials to and from the production line, ensuring that the Line Operator has everything needed for continuous operation., • Inspect products during and after the finishing process to ensure they meet quality standards and reporting any defects or issues., • Prepare parts for various processes by following customer specifications to clean, rack, and/or sand., • Unrack and inspect parts for defects and remove masking materials if needed after processing., • Package parts after processing for shipment to customers., • Utilize computer system to track job progress and scan in and out of jobs, • Verify the accurate process is performed per the customers specifications, • Complete work orders and requests in a timely fashion., • Operate, maintain and clean manufacturing equipment and work area., • Adhere to all company policies and procedures. Qualifications • This is an entry-level position; no previous experience is required. Some manufacturing or related experience is a plus but not required! Shift Hours • 1st Shift: Monday-Friday 7:00am-3:30pm Total Compensation Package • Wage, • Starting at $16.50/hour and up, • Paid Weekly!, • Benefits - We recognize the value of a comprehensive benefits package and work vigorously to ensure our package meets the needs of our employees and their families. Eligible employees can elect and participate in variety of benefits including:, • Paid Holidays, • Paid Vacation / Sick Time, • 401 (k) Retirement Plan with Company Match, • Medical, Dental & Vision Insurance, • Employee Assistance Program (EAP), • Health Savings Account (HSA), • Company Paid Life Insurance, • Voluntary Insurance Benefits including Disability Insurance, Accident Insurance, Cancer Insurance, Critical Illness Insurance, Hospital Indemnity Insurance and Life Insurance, • Free Fountain Soda Machine On-site! Triple Cities Metal Finishing is an Equal Opportunity Employer. We provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description C.H. Thompson is currently seeking a skilled Quality Control Technician to support and strengthen our Quality Department. This role is approximately 75% hands-on, production floor work and 25% computer-based/desk work. The position works closely with production, inspection, and management teams to ensure compliance with customer specifications, drive corrective actions, and improve process control. Responsibilities include hands-on inspection and troubleshooting, as well as documentation (CARC logs, FAIs), customer communication, and technical quality support. About Us: C.H. Thompson is a premier one-stop-shop for all of your finishing needs. Our continuous focus on improving quality and increasing productivity has made CH Thompson Finishing a leader in the industry. We offer several services including anodizing, painting, powder coating, intricate masking and silk screening, allowing us to provide multiple finishes on individual parts. We service a multitude of industries including; aerospace, agricultural, automotive, computer, electronics, household, industrial, medical and military. Our customer base ranges from small privately owned machine shops to top Fortune 500 companies such as Lockheed Martin, General Dynamics and BAE Systems. We are also proud to be ISO 9001:2015, AS9100D and NADCAP certified! Position Overview Responsibilities May Include: • Quality Documentation, CARC & Corrective Actions, • Complete CARC Logs, FAI documentation, and related quality records, • Lead and/or support corrective action processes, including issue identification, root cause analysis, and implementation tracking, • Ensure all documentation is accurate, complete, and compliant with customer and internal requirements, • Cross-check job requirements, specifications, and internal processes to ensure full compliance, • Inspection & Hands-On Quality Support, • Perform first piece, in-process, and final inspections of parts and materials, • Assist with first-piece masking verification and set up validation, • Use measurement tools (calipers, gauges, micrometers, rulers, etc.) to verify conformance, • Technical Review & Problem Solving, • Read and interpret blueprints, technical drawings, and customer specifications, • Identify non-conformances, investigate root causes, and drive corrective actions through completion, • Troubleshoot coating, masking, and finishing issues in collaboration with production teams, • Communication & Customer Support, • Communicate inspection findings and quality concerns with production teams in real time, • Provide clarification on masking requirements and specification interpretation when needed, • Support customer communication regarding quality concerns, technical requirements, and compliance questions, • Process Improvement & R&D Support, • Assist with testing and evaluation of coating or paint-related issues, • Support development and refinement of quality procedures and controls, • Help identify opportunities for improvement in inspection methods and production processes, • Team Support & Flexibility, • Jump in to assist inspectors and production staff during high workload or bottlenecks, • Collaborate closely with management on daily priorities and workload balancing Qualifications: • Experience with first article inspection, spec interpretation/compliance, and former QC background preferred, • Strong attention to detail and commitment to accuracy, • Ability to read and interpret blueprints and technical specifications, • Experience using measurement and inspection tools (calipers, gauges, etc.), • Strong communication skills and ability to work cross-functionally, • Comfortable working in a fast-paced manufacturing environment, • Ability to stand for extended periods and work hands-on in production areas, • Strong critical thinking and problem-solving skills Shift Hours: • Monday - Thursday 6:30am - 3:30pm, Friday 6:30am-12:30pm Total Compensation Package: • Wage, • $18.00 - $23.00 per hour., • Compensation depends on the selected candidate's experience., • Benefits - We recognize the value of a comprehensive benefits package and work vigorously to ensure our package meets the needs of our employees and their families. Eligible employees can elect and participate in variety of benefits including:, • Paid Holidays, • Paid Vacation / Sick Time, • 401 (k) Retirement Plan with Company Match, • Medical, Dental & Vision Insurance, • Employee Assistance Program (EAP), • Health Savings Account (HSA), • Company Paid Life Insurance, • Voluntary Insurance Benefits including Disability Insurance, Accident Insurance, Cancer Insurance, Critical Illness Insurance, Hospital Indemnity Insurance and Life Insurance, • Free Fountain Soda Machine On-site! C.H. Thompson is an Equal Opportunity Employer. We provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job DescriptionDescriptionFood Service Director Full-Time Positions Available. Apply Today! Nursing Home, Senior Living, Hospital, or Healthcare Required! Retention & Longevity Bonuses Available: We reward loyalty and long-term commitment with additiona bonus compensation based on years of service. • $2,500 - After 6 months of service, • $2,900 - After 9 months of service, • $2,500 - After 12 months of service We will provide sanitation certification if you are not already Serve Safe Certified. We are seeking an experienced Food Service Director for our Skilled Long-Term Care Facility in Binghamton, NY area to oversee our dining operations and ensure exceptional food service delivery. The ideal candidate will have a strong background in food service healthcare management. Food Service Director Key Duties • Schedule and assign staff, prepare, and process department payroll and new hire paperwork., • Ensure the food service operates within established budgetary guidelines., • Ordering and purchasing., • Knowledge of local, State, Federal regulations, and survey inspection process., • Train, supervise, and evaluate dietary staff, ensuring adherence to food safety and sanitation standards, as well as regulatory compliance., • Oversee the overall sanitation and cleaning of the kitchen, storage and dining areas, and equipment., • Performs other job-related duties. Food Service Director Qualifications • Current ServSafe certification or we will provide upon hire., • Certified Food Manager preferred. Certified Dietary Manager (CDM) certification a plus., • Minimum 2-3 years managing the food service department in long term care facility, hospital, or healthcare setting strongly preferred., • Strong knowledge of large scale and therapeutic food preparation., • Solid leadership and supervisory skills., • Proficiency in basic computer skills, Outlook Email, Microsoft Office, Meal Tracker, OnCare, and Meal Tracker. Food Service Director Benefits • Health, Dental and Vision Insurance, • Patriot Preventive Care - Your Wellness Guardian, • Paid Time Off and Paid Holidays, • Uniform Shirts Provided, • Direct Deposit, • 401K, • Education Reimbursement - $250 Annually, • Paid Orientation and Training, • Opportunities for career advancement

Job Description Salary: $70,000 - $75,000 At over 300 college & universities around the country, Chartwells Higher Education is re-inventing the on-campus dining experience. We are challenging the norm and setting new standards by investing in high-tech, food-infused social spaces that bring people together to promote meaningful relationships and interactions. We are food-forward difference makers, bound together by a desire to feed hungry minds and prepare students for success. We are seeking hungry, humble and smart associates who are looking to join and grow with a diverse organization. We invite you to start your career journey with us and look forward to hearing from you. Job Summary As a Sous Chef I, you are responsible for assisting with the overall success of the food program and overseeing culinary functions. The position entails assisting in all phases of planning, ordering, inventory, and food preparation. This includes adhering to the client’s culture and guidelines, the Health Department’s regulations, and the company’s standards and expectations of food quality, freshness and presentation. The Sous Chef I also motivates, trains, develops, and directs the back of house associates preparing and cooking foods to accomplish the objectives of the operation to the satisfaction of the customers, clients, and management. Essential Duties and Responsibilities: • Assists in coordinating and participating in the preparation and cooking of various food items., • Assists with planning and creating menus., • Rolls out new culinary programs in conjunction with the marketing and culinary team., • Assists with managing cost controls and controlling expenditure., • Performs other duties as assigned. Qualifications: • 5 years of related culinary experience including 1 year at the management level., • Experience in restaurants, hotels, corporate dining, education, military, health care, and/or related food service operations., • Knowledge of food and industry trends with a focus on quality, production, sanitation, safety, food cost controls, and presentation., • Ability to set up and distribute production sheets., • Supervisory, leadership, training, management, and coaching skills., • ServSafe or Department of Health Certification is preferred., • Computer skills and knowledge of MS Office products including Excel., • Associate’s degree in Culinary Arts is preferred. Apply to Chartwells Higher Education today! Chartwells Higher Education is a member of Compass Group USA Click here to Learn More about the Compass Story Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. Applications are accepted on an ongoing basis. Chartwells Higher Ed maintains a drug-free workplace. Associates at Chartwells Higher Ed are offered many fantastic benefits. • Medical, • Dental, • Vision, • Life Insurance/ AD, • Disability Insurance, • Retirement Plan, • Paid Time Off, • Holiday Time Off (varies by site/state), • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs), • Paid Parental Leave, • Personal Leave Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. https://www.compass-usa.com/wp-content/uploads/2023/08/2023WageTransparencyChartwellsHED.pdf Certain positions may require Florida Level 2 background screening. Details: https://info.flclearinghouse.com/ Req ID: 1515199 Chartwells HE KRISTINA MCCARTHY [[req_classification]]

Job Description Pharmaceutical Sales Representative (Entry level or experienced) We are currently looking to add excellent sales individuals to our professional Pharmaceutical Sales Rep team. We are a privately held company and offers a great corporate culture that includes award-winning support, continued professional development, excellent compensation, and innovative products that are in high demand. In a world where talented candidates have choices - choose to work somewhere where you will be appreciated! We are actively seeking experienced or entry level pharmaceutical sales rep professionals with recent industry sales experience as well as entry level candidates. We are looking for candidates for our pharmaceutical sales representative opportunities who are passionate, have a positive attitude, and take ownership in all that they do. If that describes you, we should talk! Pharmaceutical Sales Rep Position Summary: Each one of our Pharmaceutical Sales Representatives is accountable and responsible for her/his territory achieving or surpassing sales goals on a monthly basis. The Pharmaceutical Sales Representative is a full-time position that includes a competitive compensation, lucrative quarterly incentive commissions based on sales results, innovative products to sell and potential for growth. Pharmaceutical Sales Rep Essential Functions: • Takes ownership and demonstrates the ability to drive monthly sales results through superior selling skills., • Above average interpersonal, platform, and written communication skills., • Proven ability to observe and identify market opportunities and challenges and subsequently develop, plan, implement, and follow through with action plans to positively influence opportunities and challenges., • Develop and maintain superior relationships with key decision makers and influencers within physician offices., • Consistently exhibits a high level of proficiency and expertise in discussing and demonstrating the company’s products, as well as the related disease state(s) and competitive products., • Must pose the ability to work effectively in a team environment while positive, open communication and collaboration with coworkers and counterparts is exercised., • Completes all administrative duties in a timely fashion and works within the specified budget., • Consistently executes all field sales activities with a high degree of professionalism in accordance with established promotional guidelines. Requirements Our Pharmaceutical Sales Rep Requirements: • Related sales experience is a plus!, • MUST be able to sell “clinically” – able to discuss products and complex disease state(s)., • Documented successful sales track record – must have “brag book” to show in the interview., • Excellent communication skills – verbal and written., • Ability to execute a sales and marketing plan., • Ability to manage a territory budget and function in a fast-paced emerging company environment., • Computer and data base analysis proficiency related to operation of territory. Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Training & Development The next step is yours. Apply today for one of our Pharmaceutical Sales Rep opportunities. Interviews start next week.

Job Description JOB SUMMARY/OBJECTIVE: The Quality Inspector 1 will be responsible for performance of delegated duties. To excel in this key role, you must be able communicate clearly. KNOWLEDGE/SKILLS: • Ability to use a microscope with reticle or dazor to inspect components., • Ability to measure product attributes using micrometers, calipers and tape measure., • Ability to read and understand Blueprint / Drawings., • Performs operations as defined by specifications., • Achieve IPC-620 certification., • Achieve productivity standards., • Achieve quality targets., • Is accountable for individual results., • Adheres to established safety practices, environmental management, and quality systems requirement., • May include other duties as assigned and/or special projects. QUALIFICATIONS - EDUCATION/EXPERIENCE: • Ability to follow written manufacturing instructions and general specifications., • Computer skills and use of computer programs., • Understands and effectively utilize desktop applications and manufacturing systems as required., • Demonstrates the knowledge of inspection techniques and product attributes. EDUCATION & EXPERIENCE: • High school or equivalent., • Basic reading, writing and math skills., • Communicate effectively, both verbally and in writing., • Typically requires 1 year of prior manufacturing experience., • IPC-1620 certification a plus but not require. WORK AUTHORIZATION/SECURITY CLEARANCE: • No special clearances required. ADVANTAGES OF WORKING FULL-TIME: • Health, Dental, & Vision Insurance, • Life Insurance, • PTO & Paid Holiday, • Long & Short Disability, • 401K MUST BE ABLE TO COMMUTE: • Binghamton, NY (Required) WORK LOCATION: • In person I3/SureScan is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, national origin, age, sex, religion, disability, sexual orientation, marital status, veteran status, gender identity or expression, or any other basis protected by local, state, or federal law. This policy applies regarding all aspects of one’s employment, including hiring, transfer, promotion, compensation, eligibility for benefits, and termination.

Job DescriptionCompany Description Tomra of North America is an International Recycling Company that is looking to hire full time warehouse employees in Vestal, NY. First shift $18.00/hr 7:00am start Job Description Our warehouse associates play a critical role in meeting our daily business demands. Warehouse associates are responsible for unloading trailers, processing the used beverage containers, and reloading trailers for delivery to customers. The position is labor intensive and aided by the use of pallet jacks and forklifts. REWARDS: • Full benefits package including medical, dental, and vision, • 401k with company match, • A variety of career advancement opportunities across multiple locations, • 3+ weeks of Paid Time Off in first year of employment, including immediate accrual, • A positive work environment with a focus on safety and teamworkQualifications, • Must pass pre-employment screening and physical., • Forklift experience but we will train the right person, • Ability to stand, lift, bend, kneel, twist, for duration of an eight-hour shift, • Ability to work with limited supervision, • Ability to work occasional overtime on weekends to meet business demands, • Not afraid to work hard and get dirty, • Previous warehouse experience, • Basic computer/math skill Additional Information All your information will be kept confidential according to EEO guidelines. #veswhs

Job Description CH. Thompson is currently seeking a motivated Maintenance Technician to join our team! As a Maintenance Technician, you will be a vital part of our team, ensuring the smooth operation of our facility through various maintenance tasks. Additionally, this role offers a fantastic opportunity to work directly with our Master Maintenance Technicians, with a clear path for career advancement and professional growth. About Us C.H. Thompson is a premier one-stop-shop for all of your finishing needs. Our continuous focus on improving quality and increasing productivity has made CH Thompson Finishing a leader in the industry. We offer several services including anodizing, painting, powder coating, intricate masking and silk screening, allowing us to provide multiple finishes on individual parts. We service a multitude of industries including; aerospace, agricultural, automotive, computer, electronics, household, industrial, medical and military. Our customer base ranges from small privately owned machine shops to top Fortune 500 companies such as Lockheed Martin, General Dynamics and BAE Systems. We are also proud to be ISO 9001:2015, AS9100D and NADCAP certified! Position Overview • Electrical Maintenance: Perform all minor & major electrical maintenance tasks using appropriate tools. Work with systems ranging from 110v single-phase to 480-volt 3-phase., • Plumbing Maintenance: Conduct minor & major plumbing repairs such as fixing leaks, unclogging drains, trenching, and replacing hoses., • Industrial Machinery: Repair, install, and adjust industrial machinery to ensure optimal performance., • Troubleshooting: Diagnose and repair defective equipment promptly and efficiently., • Work Orders: Swiftly respond to work order requests, ensuring minimal downtime., • General Maintenance: Perform a variety of maintenance tasks to support the overall function and safety of our facility. Qualifications • Communication Skills: Strong verbal and written communication skills., • Physical Requirements: Ability to push up to 75 pounds, bend, kneel, and climb as needed., • Technical Skills:, • Strong understanding of electrical systems and plumbing., • Strong mechanical aptitude and troubleshooting abilities., • Experience with PVC, CPVC, and black steel pipe is preferred. Shift Hours • Monday – Thursday 6:30am-3:30pm, Friday 6:30am-12:30pm Total Compensation Package • Wage, • $20.50 - $27.00 per hour, • Compensation depends on the selected candidate's experience., • Benefits - We recognize the value of a comprehensive benefits package and work vigorously to ensure our package meets the needs of our employees and their families. Eligible employees can elect and participate in variety of benefits including:, • Paid Holidays, • Paid Vacation / Sick Time, • 401 (k) Retirement Plan with Company Match, • Medical, Dental & Vision Insurance, • Employee Assistance Program (EAP), • Health Savings Account (HSA), • Company Paid Life Insurance, • Voluntary Insurance Benefits including Disability Insurance, Accident Insurance, Cancer Insurance, Critical Illness Insurance, Hospital Indemnity Insurance and Life Insurance, • Free Fountain Soda Machine On-site! C.H. Thompson is an Equal Opportunity Employer. We provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description C.H. Thompson is currently seeking a highly organized and customer-focused Customer Service Representative to manage front-line communication with our customers. This role is responsible for answering phones, responding to emails, and assisting customers at our shipping/receiving office window. The ideal candidate will be proactive, detail-oriented, and able to manage multiple priorities in a fast-paced environment. About Us: C.H. Thompson is a premier one-stop-shop for all of your finishing needs. Our continuous focus on improving quality and increasing productivity has made CH Thompson Finishing a leader in the industry. We offer several services including anodizing, painting, powder coating, intricate masking and silk screening, allowing us to provide multiple finishes on individual parts. We service a multitude of industries including; aerospace, agricultural, automotive, computer, electronics, household, industrial, medical and military. Our customer base ranges from small privately owned machine shops to top Fortune 500 companies such as Lockheed Martin, General Dynamics and BAE Systems. We are also proud to be ISO 9001:2015, AS9100D and NADCAP certified! Position Overview Customer Communication & Support • Answer incoming phone calls and respond to customer emails in a timely, professional, and courteous manner., • Greet and assist customers at the shipping/receiving office window, ensuring a positive in-person experience., • Serve as the primary liaison for all customer correspondence, ensuring customers receive prompt and accurate information., • Address customer complaints and issues, resolving standard inquiries independently or escalating complex issues to the appropriate team members in a timely manner., • Document customer interactions, questions, and requests; ensure proper follow-up and resolution., • Develop strong relationships with key customers, ensuring their needs are met promptly., • Collaborate with sales, production, and quality control teams to ensure all aspects of the customer experience, from order entry to fulfillment, are seamless and efficient. Order Management & Coordination • Assist with order entry, ensuring accuracy of customer data, product details, and delivery requirements., • Monitor order status and coordinate with production, shipping, and management teams to ensure timely fulfillment., • Communicate expected ship dates, delivery statuses, and any changes or delays to customers proactively. On-Time Delivery & Internal Collaboration • Track upcoming due dates and customer promise dates; proactively notify internal teams to ensure commitments are met., • Escalate issues to the appropriate department or management when delays or concerns arise., • Work closely with management to address customer questions, concerns, and complaints in a timely and professional manner. Shipping & Receiving Oversight • Oversee daily shipping and receiving activities to ensure efficient flow of materials and finished goods., • Prepare shipping documentation (packing slips, labels, BOLs, etc.) and ensure accuracy of outbound shipments., • Verify incoming shipments against purchase orders; ensure materials are entered into systems accurately and routed appropriately., • Maintain shipping/receiving records and ensure documentation is organized and accessible. General Administrative Responsibilities • Maintain a clean, organized, and professional customer-facing area at the shipping/receiving window., • Support continuous improvement efforts to enhance customer experience and internal processes., • Perform other duties as assigned to support customer satisfaction and operational efficiency. Qualifications: • Attention to Detail: Keen eye for detail and accuracy., • Ability to Multi-task: Must be able to multi-task and work efficiently in a fast-paced environment., • Organization: Exceptional organizational skills - able to prioritize tasks, manage competing deadlines, and maintain accurate documentation., • Communication: Strong verbal and written communication skills, excellent communication and interpersonal abilities. Positive attitude and a proactive approach to problem-solving., • Problem-Solving: Ability to identify issues and recommend solutions in a professional way. Strong conflict resolution skills. Ability to work under pressure and handle challenging situations. Shift: • Monday-Thursday 6:30am-3:30pm, • Fridays 6:30am – 12:30pm Total Compensation Package: • Wage, • $23.00 - $28.00 per hour., • Compensation depends on the selected candidate's experience., • Benefits - We recognize the value of a comprehensive benefits package and work vigorously to ensure our package meets the needs of our employees and their families. Eligible employees can elect and participate in variety of benefits including:, • Paid Holidays, • PTO Time, • 401 (k) Retirement Plan with Company Match, • Medical, Dental & Vision Insurance, • Employee Assistance Program (EAP), • Health Savings Account (HSA), • Company Paid Life Insurance, • Voluntary Insurance Benefits including Disability Insurance, Accident Insurance, Cancer Insurance, Critical Illness Insurance, Hospital Indemnity Insurance and Life Insurance, • Free Fountain Soda Machine On-site! C.H. Thompson is an Equal Opportunity Employer. We provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job DescriptionDescription: Member Onboarding and Relationship Specialist Department: Lending Services Reports to: AVP of Credit Solutions Classification: Non-exempt, Full-Time, In-Person Effective: May 2026 Overview: The Member Onboarding & Relationship Specialist is responsible for converting newly acquired indirect lending relationships into engaged, multi-product GHS members and for protecting the existing membership base from attrition. This role serves as the primary point of relationship development for members who join GHS through the indirect auto lending channel — currently the single largest source of new memberships — and is accountable for moving those members from a transactional loan relationship into full credit union engagement. The role also owns proactive outreach to dormant and at-risk members, with a clear mandate to reengage relationships before they lapse and to retain members who show signals of leaving. Success in this position is measured in member depth, member retention, and the conversion of single-service relationships into long-term, multi-product GHS memberships. Essential Functions and Responsibilities: • Indirect member outreach: Conduct structured outbound contact with members acquired through the indirect auto lending channel within 7 days of loan funding. Welcome the new member to GHS, explain the full range of credit union products beyond the indirect loan, and actively position checking accounts, debit cards, online and mobile banking, credit cards, and additional lending products. A successful conversion is defined as the indirect member adopting at least one additional GHS product., • New member onboarding: Conduct outbound onboarding calls to all newly opened GHS memberships as a core daily function. Welcome each new member, confirm understanding of opened products, identify additional needs, and cross-sell GHS products and services such as new checking accounts, loan products, credit cards, debit cards, and online/mobile banking. Outreach activity supports GHS annual business goals as established by the CEO., • Dormant member reengagement: Work an assigned list of dormant members on a cadence defined by the manager with the goal of reactivating the relationship. A successful reengagement is defined as the member completing a qualifying transaction or adopting a new product following contact. Maintain accurate records of all outreach attempts, member responses, and outcomes., • At-risk member retention: Identify members who exhibit at-risk signals — including account closure requests, declining transaction activity, withdrawal of direct deposit, or sustained balance decline — and conduct retention outreach with the goal of preserving the relationship. Document the reason members give for considering departure and escalate systemic themes to the supervisor., • Outbound calling campaigns: Execute defined outbound calling campaigns to grow products per member, including referral follow-up, post-event outreach, and member development initiatives as assigned. Each campaign has a stated objective, target audience, and success metric., • CRM documentation: Document all member outreach, contact attempts, conversations, and outcomes in the credit union's designated CRM or call tracking system on the same business day. Maintain a current pipeline of active member opportunities and provide activity reporting as required., • Member service support: Assist members with inquiries relating to, but not limited to, opening and closing accounts, product inquiries and credit union service in support of member accounts, IRA administration, CDs, transactions involving multiple savings bonds, and deceased member accounts., • Problem resolution: Resolve problems or discrepancies concerning member accounts. If needed, refer them to appropriate staff., • This role is structured as a phone-based outbound development position. Branch opening/closing, Member Service Representative phone queue coverage, and Loan Officer support are not standing functions; participation in these activities is by exception only and not part of routine workload., • Perform other duties as assigned. Performance Measurement: Performance is measured against CRM documentation standards, demonstrated professional standards, and goals established by the supervisor and credit union leadership. • CRM accuracy: 100% of member outreach documented in the credit union's designated CRM or call tracking system on the same business day., • Achievement of personal, team and business goals as established., • Adherence and compliance with credit union procedures and policies. This includes but is not limited to the Internal Controls Policy, Bank Secrecy Act, OFAC and other credit union, state and federal procedures, policies and regulations., • Prompt, friendly, personal and professional service to members and teammates., • Accuracy of work product, transactions and information., • Complete assigned training, product knowledge, cross training and sales techniques, and other development activities as assigned., • Teamwork with the Member Service team and other departments., • Maintain high level of confidentiality regarding credit union staff and member information., • Responsiveness to internal and external correspondence and inquiries. Follow through. Ownership and accountability., • Maintain a professional work environment and businesslike appearance. Experience: Minimum two years of demonstrated outbound sales, business development, member or customer relationship development, or call center sales experience required. Financial services or credit union experience strongly preferred. Direct experience converting prospects or single-service customers into multi-product relationships is a significant advantage. Prior teller, cashier, or transactional service-only experience without an outbound sales component is not sufficient for this role. Education: A high school education or GED is required plus the required experience. An Associate Degree is preferred. Interpersonal: This position requires sustained contact with members and prospective members and demands professionalism, courtesy, finesse, tact and diplomacy. The role requires a demonstrated ability to build rapport quickly over the phone, identify member needs through effective questioning, and influence purchase and adoption decisions without high-pressure tactics. Must demonstrate clear verbal and written communication. Other Skills: Must be able to operate standard office equipment and efficiently use and navigate a computer. Must be able to type and key data utilizing the Microsoft Office Suite and software unique to the credit union. Experience with CRM or call tracking software strongly preferred. This role requires the ability to navigate multiple systems and document conversations in real time while speaking with the member on the phone. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of the position, the employee is regularly required to stand or sit, use hands and arms to reach, and hands and fingers to feel. The employee is regularly required to talk, hear and communicate with members. The employee periodically stands, walks, reaches, stoops, kneels, crouches or squats and uses the stairs. Employees must regularly lift and/or move up to 10 pounds. Periodically lift and/or move 20 lbs. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Work Environment Employees are required to contribute to a positive work environment and demonstrate the credit union brand of "The Relationship of a Lifetime" by demonstrating GHS Service Standards of customer focus with positivity, personal ownership and accountability, clear and positive communication and responsiveness. Collaboration, consistency, and respect, trust and demonstration of integrity are some of the professional behaviors regularly required. This job description is intended to be a guide and may not be all encompassing or may amend/modify as business needs change. GHS is an equal opportunity employer. At GHS, we are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy (including childbirth, lactation and related medical conditions), national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information (including characteristics and testing), military and veteran status, and any other characteristic protected by applicable law. GHS believes that diversity and inclusion among our teammates is critical to our success and we seek to recruit, develop and retain the most talented people from a diverse candidate pool. Requirements:

We're building a world of health around every individual - shaping a more connected, convenient and compassionate health experience. At CVS Health, you'll be surrounded by passionate colleagues who care deeply, innovate with purpose, hold ourselves accountable and prioritize safety and quality in everything we do. Join us and be part of something bigger - helping to simplify health care one person, one family and one community at a time. Position Summary A Shift Supervisor is a key leader supporting the CVS Store Management team in driving store execution and performance while building consumer loyalty to CVS/pharmacy through a focus on excellent customer service. When there is no manager or Operations Supervisor onsite, the Shift Supervisor leads the store staff, ensures that store operations run smoothly, and is responsible for ensuring the completion of all opening and closing procedures. Management Work effectively with store management and store crews Supervise the store's crew through assigning, directing and following up of all activities Effectively communicate information both to and from store management and crews Customer Service Assist customers with their questions, problems and complaints Promote CVS customer service culture. (Greet, offer help, and thank) Handle all customer relations issues in accordance with company policy and promote a positive shopping experience for all CVS customers Maintain customer/patient confidentiality Merchandise/Presentation Price merchandise Stock shelves Execute the displays, sign and inventory of weekly, promotional, and seasonal merchandise Execute the display and maintenance of off-shelf merchandise Reset departments following POGs Required Qualifications Deductive reasoning ability, analytical skills and computer skills. Advanced communication skills and supervision skills Ability to work a flexible schedule, including some early morning, overnight and weekend shifts, to work overtime as needed, and to respond to urgent issues at the store when they arise Preferred Qualifications • Experience as a retail supervisor Education High School diploma or equivalent preferred but not required. Anticipated Weekly Hours 20 Time Type Part time Pay Range $18.00 - $27.00 This pay range represents the base hourly rate or base annual full-time salary for all positions in the job grade within which this position falls. The actual base salary offer will depend on a variety of factors including experience, education, geography and other relevant factors. Our people fuel our future. Our teams reflect the customers, patients, members and communities we serve and we are committed to fostering a workplace where every colleague feels valued and that they belong. Great benefits for great people We take pride in offering a comprehensive and competitive mix of pay and benefits that reflects our commitment to our colleagues and their families. This part-time position is eligible for a range of benefits and programs that support the physical, emotional, and financial well-being of colleagues. Depending on hours worked and eligibility, the benefits for this position include dental, vision, wellness resources, employee discounts, access to certain voluntary benefits, and other programs. Additional details about available benefits are provided during the application process and on Benefits Moments (https://learn.bswift.com/cvshealth-mainland) . We anticipate the application window for this opening will close on: 07/20/2026 Qualified applicants with arrest or conviction records will be considered for employment in accordance with all federal, state and local laws. CVS Health is an equal opportunity/affirmative action employer, including Disability/Protected Veteran - committed to diversity in the workplace.

Job Description Salary: 65,000 - 75,000 / year based on experience Other Forms of Compensation: Flexible Paid Time Off, Benefits, 401K, Training Pay Grade: 12 Morrison Healthcare, a Compass Healthcare company, is a leader in healthcare food and nutrition services company, serving more than 1,000 hospitals and healthcare systems across the country. With more than 31,000 associates nationwide, Morrison uses the Power of Food to create personalized dining experiences for patients and in their cafés to advance the healing and healthful missions of its clients. Morrison has been serving some of the nation’s largest health systems for more than 70 years, and it leverages culinary, nutritional, and operational expertise to provide consistency and transform the healthcare experience. Since 2012, Morrison has been recognized as one of Modern Healthcare’s Best Places to Work and Training Magazine has named it a Top 125/APEX Award Training Organization. Morrison has more than 1,600 registered dietitians and 1,200 executive chefs, and serves more than 600M meals annually. Job Summary The Retail Manager role is an exciting opportunity for an energetic and entrepreneurial leader who is always looking for better, more efficient ways to operate. This position is responsible for the successful operation of retail and cafeteria services within Food & Nutrition Services. The Retail Manager oversees daily operations, staff leadership, financial performance, and customer satisfaction while supporting a high‑quality dining experience in a healthcare setting. Retail Managers perform a wide range of responsibilities, including planning and supervising special functions, maintaining cash controls and payroll records, and recruiting, training, and developing hourly team members. This role also plays a key part in fostering positive public relations and ensuring resources are used safely and efficiently. Key Responsibilities • Oversee daily administrative and operational functions, • Manage all aspects of staff leadership, including hiring, training, scheduling, and coaching, • Direct financial performance including budgeting, forecasting, and financial reporting, • Monitor marketplace trends to enhance retail offerings, • Manage cost controls and oversee expenditures for the account, • Ensure compliance with sanitation, safety, and food safety standards, • Purchase, manage, and control inventory, • Lead the rollout of new culinary programs in collaboration with company culinary and marketing teams, • Serve as the primary liaison with the client and internal stakeholdersPreferred Qualifications, • Culinary degree preferred, or Associate degree with related experience, • Three or more years of supervisory experience in foodservice operations, • Prior leadership experience in healthcare, senior living, retirement, or similar environments strongly preferred, • Strong knowledge of retail, food, and catering trends with emphasis on quality, production, sanitation, food cost controls, and presentation, • Proven leadership, management, and coaching skills, • Strong written and verbal communication skills, • Financial, budgetary, accounting, and analytical abilities, • Proficiency with Microsoft Office, email, internet, and relevant computer systems, • ServSafe® Certification required This role supports a 300+ bed medical center, overseeing four retail outlets, generating over $3 million in annual revenue, and leading a team of 23 FTEs. Apply to Morrison Healthcare today! Morrison Healthcare is a member of Compass Group USA Click here to Learn More about the Compass Story Associates at Morrison Healthcare are offered many fantastic benefits. • Medical, • Dental, • Vision, • Life Insurance/ AD, • Disability Insurance, • Retirement Plan, • Flexible Time Off, • Paid Parental Leave, • Holiday Time Off (varies by site/state), • Personal Leave, • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. https://www.compass-usa.com/wp-content/uploads/2023/08/2023WageTransparencyMorrisonHealthcare.pdf Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. We encourage applicants with a criminal history (and driving history) to apply. Certain positions may require Florida Level 2 background screening. Details: https://info.flclearinghouse.com/ Applications are accepted on an ongoing basis. Morrison Healthcare maintains a drug-free workplace. Req ID: 1532243 Morrison Healthcare AMY S MILLER [[req_classification]]

Job Description Triple Cities Metal Finishing is currently seeking an Assistant Manager for our Paint & Powdercoat Department. As an Assistant Manager you will drive production flow and material coordination, directly impacting our throughput and ensuring we hit our on-time delivery targets every time. Additionally, this role offers a fantastic opportunity to work directly with our Leadership Team, with a clear path for career advancement and professional growth. About Us: Triple Cities Metal Finishing provides a wide variety of surface finishing options to a multitude of industries including aerospace, agricultural, automotive, computer, electronics, household, industrial, medical, military, construction, and office parts. We are ISO 9001:2015, AS9100D & NADCAP Certified! Since 1945, TCMF has made innovative, as well as necessary changes in the way we conduct everyday business. From advanced surface preparation to highly technical finishing processes, we can handle the smallest pieces to large parts over 30 feet long. Our three shifts of skilled professionals in our 125,000 square foot facility have made us the vendor of choice for metal finishing for Northeastern United States. Whether it is electroplating, electroless plating, wet paint, or powder coat, we finish it right the first time! Position Overview Leadership and Supervision: • Lead and manage the Paint & Powdercoat team, ensuring they remain on task with high performance and adherence to safety and quality standards., • Provide training and development opportunities for team members to enhance their skills and knowledge. Operational Efficiency: • Distribute production schedules or work orders to departments., • Monitor production schedules to ensure job targets are met., • Identify and implement process improvements to enhance efficiency and productivity., • Help to keep employees on task and promote increased throughput by assisting with racking, prepping, inspecting, material handling, and by gathering proper paperwork and materials needed., • Identify and resolve any issues or inefficiencies in the Paint & Powdercoat Process such as incorrect paperwork - communicate with engineering and the quality team on changes needed or missing documentation., • Work closely with other departments to ensure seamless workflow and continuous improvement., • Implement and maintain quality control procedures to ensure all products meet industry standards and customer specifications. Process & Supply Management: • Oversee the Paint & Powdercoat processes, ensuring they are carried out efficiently and effectively., • Ensure all team members have the necessary supplies and tools to complete their jobs efficiently and plan ahead to ensure there are no gaps in production and/or down time., • Monitor inventory levels and coordinate with the procurement team to replenish supplies as needed. Work Order Management: • Review and interpret detailed work order instructions to guide the team in accurately painting parts according to specifications., • Ensure work orders are followed meticulously to maintain high-quality standards. Customer Service: • Assist with shipping coordination (matching paperwork, working with drivers, obtaining BOLs), • Respond to customer inquiries Safety: • Maintain a clean and organized work area to promote safety and efficiency., • Ensure adherence to all safety protocols and use of required personal protective equipment (PPE). Qualifications • Experience:, • Previous experience in production or manufacturing supervisory role preferred., • Skills:, • Clear and concise communication skills, both verbal and written, to effectively convey information and/or ideas professionally across all levels of the organization., • Ability to create and maintain positive and professional relationships at all levels of the organization., • Strong attention to detail, • Strong analytical skills, • Ability to problem-solve issues to their root cause and work to implement corrective action., • Excellent organization skills., • Proven experience leading successful teams in a manufacturing or industrial environment. Education Requirements • High school diploma or GED Preferred Total Compensation Package: • Wage, • $62,500 - $70,000 per year., • Compensation depends on the selected candidate's experience., • Benefits - We recognize the value of a comprehensive benefits package and work vigorously to ensure our package meets the needs of our employees and their families. Eligible employees can elect and participate in variety of benefits including:, • Paid Holidays, • Paid Vacation / Sick Time, • 401 (k) Retirement Plan with Company Match, • Medical, Dental & Vision Insurance, • Employee Assistance Program (EAP), • Health Savings Account (HSA), • Company Paid Life Insurance, • Voluntary Insurance Benefits including Disability Insurance, Accident Insurance, Cancer Insurance, Critical Illness Insurance, Hospital Indemnity Insurance and Life Insurance, • Free Fountain Soda Machine On-site! Triple Cities Metal Finishing is an Equal Opportunity Employer. We provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description Monroe Tractor is a well-known and respected construction equipment and agricultural equipment dealer with over 70 years of experience servicing the northeastern US. With 18 locations throughout New York, Pennsylvania, Vermont, Connecticut, and Massachusetts, we pride ourselves on providing best-in-class sales and support to over 15,000 hardworking customers. Since our founding in 1951, the industries we serve have been transformed by the technologies, equipment, and capabilities undreamed of decades ago. But the people we serve haven't changed, and neither have we. We're still a family-owned business! We're looking for a skilled Road Service Technician with a strong background in heavy equipment. In this role, you'll provide professional, safe, and efficient support for our branch while on the road, handling everything from routine maintenance to complex diesel engine repairs for customers. Qualifications • Prior experience in heavy construction equipment or agriculture equipment is preferred., • Strong independent work ethic but also able to work collaboratively with a team., • Excellent customer service skills; a builder of relationships., • Clear and concise communications., • A strong sense of urgency, focusing on time., • Computer skills., • Valid Drivers License and clean driving record is required., • Ability to independently lift between 50-75 pounds. Responsibilities • Provide technical service to equipment., • Read job orders., • Observe and listen to equipment in operation to resolve malfunction issues and execute work procedures effectively., • Follow checklists to ensure all critical parts are examined., • Examine protective guards, loose bolts, and specified safety devices on trucks, and adjust as needed., • Test-drive vehicles to ensure that they run smoothly., • Tag all warranty parts and return them to the warranty clerk., • Attend training classes and keep tabs on factory technical bulletins., • Develop and maintain positive relationships with customers to increase overall customer happiness., • Properly complete the service and/or repairs assigned by the supervisor., • Complete all work according to the applicable safety requirements and published procedures., • Participate in, and utilize to the best of one's abilities, technical training as assigned by management., • Maintain your designated workspace in an organized and clean manner., • Ensure guest vehicles are returned as clean as they were before being serviced., • Show the utmost courtesy to all guests, visitors, and dealership personnel., • Make every effort to achieve the production objectives set by management., • Adhere to the manufacturer's policies and procedures as they relate to labor operations, time, and repair order documentation when performing warranty repairs and torque specifications., • Any other duties as outlined by the Service Manager and, or management. Technician Benefits • Annual Tool/Shoe Allowance., • Uniforms provided., • Discounts on products and services., • Continued education, manufacturer hands-on and web-based training. Benefits • Medical, Dental & Vision Insurance, • Health Savings Account (Employer + Employee Contributions), • Accident & Disease Insurance, • 401K Plan + Match, • Competitive Paid time off Policy, • Short/Long Term Disability, • Annual Reviews Monroe Tractor is proud to be an Equal Opportunity Employer and values diversity in the workplace. We encourage candidates from all backgrounds to apply and join a team where your work makes a difference every day. Pay is commensurate with the applicant's experience, as it relates to the position. Pay Transparency$20—$39 USD

Job Description At PEARCE, we've got a career for you! Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit http://www.pearce-services.com. Your Impact: Are you a skilled and highly motivated Generator Technician who is looking to learn and grow in a fast-paced, challenging job in the Telecom industry? If so, Pearce has a career for you! Our Generator Technicians service and repair commercial generators on cell phone towers in your region. This role is a great match for independent, self-starters who are willing to travel. Core Responsibilities: • Maintaining generators, diagnosing and repairing problems, installing and replacing components or entire systems, and performing additional maintenance or upgrades on out-of-season equipment, • Conducting performance checks and regular maintenance on generators to ensure proper readiness, reading and following blueprints or other design specifications to install or repair, • Install fuel and water supply lines, pumps, electrical wiring and controls, and other components, and test for proper operation, • Be responsible for responding promptly/timely to Power/Generator alarms; have the ability to be on call 24/7 if necessary and respond promptly in answering assigned phone and email, • Perform work with the awareness of all potential hazards connected with the installation and maintenance of power supply equipment, switching gear, and other equipment, including but not limited to falls, electric shock, falling objects, and traffic; use safety equipment and utilize safety practices; attend and participate in all designated safety and training meetings Specific duties may vary or evolve over time based on business and client needs. Core Experience: • Two or more years of experience with generator maintenance is preferred and a minimum of one year of intense work-related experience with generator and electrical maintenance-related software, hardware, and processes, • Thorough knowledge of generator installations, maintenance, and repair of Generators; knowledge of electronic, mechanical, and electrical components; moderate computer skills, • Basic knowledge of pertinent FCC/FAA/EPA/OSHA regulations Physical/Work Environment: At Pearce safety is our number one concern. Candidates must be able to comply with OSHA Standards. • This position requires lifting over 50 pounds, stooping, bending, kneeling, squatting, climbing, and standing for long periods of time, • Must have the ability to inspect and/or troubleshoot equipment/alarms effectively, both visually and audibly, • Must be willing and able to drive long distances, workday, evening, or night hours; overtime, emergency callouts, weekends, and holidays as required; must assume 24-hour on-call duty when assigned and be gone from home for extended periods of time, • Must be able to pass a DOT physical At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range$30—$40 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Learn more about us at www.Pearce-Services.com!

Job DescriptionDescription: Are you a skilled surveyor with a passion for precision and a knack for problem-solving? Fisher Associates is seeking a dynamic Project Surveyor to join our team! In this role, you’ll be at the heart of our projects, ensuring that our land surveying services are not only accurate but also aligned with our high standards. You’ll play a vital role in bridging the gap between different disciplines within our project teams, ensuring that every project runs smoothly from start to finish. If you’re ready to make a big impact on exciting and diverse projects, we want to hear from you! Why Fisher Associates? At Fisher Associates, we believe in cultivating our gifts to create a legacy of infrastructure that improves the quality of life. Our work shapes communities, enhances sustainability, and creates meaningful connections that last for generations. • Be Heard, Be Valued – We foster an inclusive culture where leadership welcomes your ideas and feedback., • Collaborate & Innovate – Work with a highly skilled, multidisciplinary team on diverse and impactful projects., • Career Growth – Advance with clearly defined career paths, tuition assistance, and ongoing training., • Work-Life Balance – Enjoy a flexible hybrid schedule, optional half-day Fridays, and generous PTO., • Competitive Benefits – We offer a robust benefits package including immediate 401(k) enrollment with annual company contributions, comprehensive health insurance options and company-paid life and long-term disability insurance., • Give Back & Grow – Volunteer with local nonprofits through our Community Impact Committee and develop professionally with Fisher Minds—just a couple of the many ways you can get involved to engage, connect, and thrive with us! Join us in shaping the future—where your work truly makes a difference. Who We Are: Fisher Associates, P.E., L.S., L.A., D.P.C, is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. All services are delivered through the firm’s signature “Clientship” philosophy, which emphasizes not only customized, innovative quality solutions but also an exceptional client experience driven by clear communication, deep expertise, and proactive client advocacy. Salary Range: $83,200 - $91,520 annually Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Essential Functions: • Supervises survey technicians, field crews, and CADD technicians on the project team., • Performs routine and complex survey calculations and control adjustments., • Performs, assigns, or assists with records research., • Performs, assigns, or assists with CADD drafting assignments., • Analyzes boundary evidence and parcel/ROW records to determine property boundaries and Rights of Way., • Determines and documents property boundaries, easements, and land ownership details to ensure compliance with legal regulations., • Creates detailed topographic maps and surveys to provide essential data for project planning and design., • Maintains positive client relationships, understanding project requirements, and facilitating all deliverables to ensure an outstanding customer experience using Clientship Philosophy., • Provides QA/QC on survey work completed for all sectors., • Act as a mentor to those less experienced members of the project team.Requirements: Education & Experience • Associate or Bachelor's degree in surveying, geomatics, civil engineering, or a related field., • Experience in surveying software and equipment, including AutoCAD, GPS, total stations, and data collectors., • Previous experience in land surveying, • Professional Survey License required. Knowledge, Skills & Abilities • Must be knowledgeable in all aspects of Land Surveying, including boundary determinations, control adjustments, topographic surveying/mapping, NYSDOT Standards and Procedures, and ALTA requirements., • Proficiency in AutoCAD Civil 3D and MicroStation preferred., • Uphold professional performance standards aligned with the company’s Mission, Vision, and Core Values., • Build and maintain strong client relationships in adherence to the Fisher Clientship philosophy., • Demonstrate high-quality work and a commitment to continuous improvement., • Collaborate effectively across all levels, fostering respect, trust, and active listening in all interactions., • Take ownership of responsibilities and outcomes with integrity, honesty, and transparency., • Exhibit a proactive, self-motivated attitude with a strong desire to learn and grow., • Apply critical thinking and problem-solving skills while demonstrating sound judgment., • Communicate professionally and effectively in both written and verbal formats., • Manage projects, time, and tasks efficiently in a fast-paced environment., • Maintain strong attention to detail while adapting to changing priorities., • Accept and respond positively to feedback., • Proficient in Microsoft Office Suite, including Outlook, Word, and Excel. Physical Demands & Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Ability to stand and walk for long periods of time and distance., • Prolonged periods sitting at a desk and working on a computer., • Must be able to lift up to 50 pounds at a time., • Traveling on an occasional basis to project sites located throughout New York, • Must be able to access and navigate construction sites and job areas, • Ability to transverse uneven grounds, • Environmental Conditions: Office environment, field environment, construction site environment; exposure to dust, noise, grease, smoke, fumes, gases, heat, cold, and inclement weather conditions when working in the field. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. Fisher Associates does not discriminate in hiring or employment on the basis of age, race, creed, color, national origin (including ancestry), religion, gender or sex, sexual orientation (including transgender status, gender identity or expression), pregnancy (including childbirth, lactation, and related medical conditions), disability, reproductive health decision making (including, but not limited to, the decision to use or access a particular drug, device, or medical service), marital status, partnership status, caregiver status, domestic violence victim status, familial status, military status, unemployment status, genetic information (including genetic characteristics), citizenship or immigration status, or any other protected status under federal, state, or local laws.

Job Description C.H. Thompson is currently seeking an Inspection Team Lead to join our team. The Inspection Team Lead is responsible for overseeing daily workflow within the inspection department to ensure production schedules, quality standards, and customer delivery requirements are met. This is a hands-on leadership role requiring strong communication, organization, problem-solving, and team management skills in a fast-paced manufacturing environment. About Us: C.H. Thompson is a premier one-stop shop for all your finishing needs. Our continuous focus on improving quality and increasing productivity has made CH Thompson Finishing a leader in the industry. We offer several services including anodizing, painting, powder coating, intricate masking and silk screening, allowing us to provide multiple finishes on individual parts. We service a multitude of industries including: aerospace, agricultural, automotive, computer, electronics, household, industrial, medical and military. Our customer base ranges from small privately owned machine shops to top Fortune 500 companies such as Lockheed Martin, General Dynamics and BAE Systems. We are also proud to be ISO 9001:2015, AS9100D and NADCAP certified! Position Overview • Lead and support the inspection team in daily operations, • Monitor production schedules and department progress to ensure on-time delivery performance, • Communicate potential delays, manpower concerns, or overtime needs to upper management proactively, • Assist hands-on with departmental tasks including unmasking, touch-up work, inspection support, and other production activities as needed, • Assign and adjust work tasks based on employee strengths, workflow efficiency, and department priorities, • Identify bottlenecks within processes and actively assist the team to maintain production flow, • Ensure employees are following company policies, procedures, quality standards, and work instructions, • Maintain a strong floor presence and provide leadership, accountability, and motivation to the team, • Encourage teamwork, efficiency, and continuous improvement within the department, • Speak up when processes appear inefficient or unclear and work with management to improve operations, • Work closely with Production, Quality, and Customer Service teams to support overall company goals, • Assist in training and developing employees within the department Qualifications: • Education:, • High School Diploma or Equivalent is preferred., • Experience:, • Demonstrated leadership skills preferred (e.g., previous supervisory roles, high school/collegiate sports team captains, or student organization leaders), • Manufacturing or production environment experience strongly preferred but not required, • Skills & Competencies:, • Strong communication and organizational skills, • Ability to thrive in a fast-paced, high-pressure environment, • Strong problem-solving and decision-making abilities, • Self-motivated, dependable, and able to hold employees accountable, • Team-oriented mindset with strong leadership presence, • Willingness to be hands-on and actively involved in department operations, • Ability to multitask and adapt to changing priorities throughout the day Shift Hours: • Monday – Thursday 6:30am – 3:30pm, Friday 6:30am-12:30pm Total Compensation Package: • Wage, • $19.00 - $23.00/ hour, • Compensation depends on the selected candidate's experience., • Benefits - We recognize the value of a comprehensive benefits package and work vigorously to ensure our package meets the needs of our employees and their families. Eligible employees can elect and participate in variety of benefits including:, • Paid Holidays, • Paid Vacation / Sick Time, • 401 (k) Retirement Plan with Company Match, • Medical, Dental & Vision Insurance, • Employee Assistance Program (EAP), • Health Savings Account (HSA), • Company Paid Life Insurance, • Voluntary Insurance Benefits including Disability Insurance, Accident Insurance, Cancer Insurance, Critical Illness Insurance, Hospital Indemnity Insurance and Life Insurance, • Free Fountain Soda Machine On-site! C.H. Thompson is an Equal Opportunity Employer. We provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description Drive Your Career Forward with Fenix Parts About Fenix Parts: Fenix Parts isn’t just a company; it's an essential part of the automotive recycling revolution. As a leading force in the recycling and resale of OEM automotive parts, we have made our mark on the industry for over 25 years. With a robust network expanding across more than 30 locations in the U.S., we are at the forefront of reducing the environmental impact of auto waste. We thrive on innovation, sustainability, and a commitment to excellence. Why Join Fenix? Our team is expanding rapidly to keep pace with our growth and the increasing demand for price-friendly automotive solutions. We are in search of passionate, skilled individuals who are ready to drive their career forward in a dynamic and rewarding environment. If you have a passion for the automotive industry and sustainability, you will find a fulfilling career with us. Position Overview: Route Delivery Driver As a key player on our team, you’ll engage in the safe and professional delivery of OEM automotive parts. Your role is crucial in ensuring the highest standards of customer service and satisfaction while fulfilling our commercial customers automotive parts needs. Key Responsibilities: • Route Management: Handle home-daily delivery routes, planning daily schedules based on customer needs., • Loading and Unloading: Safely load and unload automotive parts, adhering to all safety protocols while preventing freight damage., • Vehicle Maintenance: Perform pre and post-trip maintenance checks on your assigned box truck to ensure optimal safety and vehicle performance., • Customer Interaction: Deliver parts accurately and collect payments, presenting bills and receipts professionally while assisting customers with any need that may arise., • Documentation: Complete and submit all required paperwork neatly and accurately at the end of your route. What We Offer: • Competitive Compensation: Attractive earnings with growth potential., • Benefits: Comprehensive benefits package including health, dental, and vision coverage, plus 401(k) options., • Work-Life Balance: Enjoy a stable day shift schedule from Monday to Friday., • Professional Development: Opportunities for advancement in a growing company., • Inclusive Culture: Proud to be an Equal Opportunity/Affirmative Action employer. Requirements: • Driving Experience: 1+ years in a professional driving role while operating a similar sized vehicle (20-26ft box truck), • Safety: Must have a safe driving record with no more than 1 accident, and no more than 2 moving violations within the past 3 years reflecting on your motor vehicle record., • Physical Capability: Ability to lift 75 lbs and manage high-volume, physical activity during deliveries as we offload automotive parts at each customer location., • Skills: Basic computer skills and the ability to identify various automotive parts., • Certifications: A valid drivers license with no major restrictions. Required Documents To Be Submitted Upon Hire: • Valid drivers’ license., • MVR authorization form., • Valid DOT medical card or the ability to obtain one., • Driver employment application., • Safety performance history report. Special Invitation: Transitioning military professionals are encouraged to apply. Your skills are highly valued here! Ready to Make a Difference? Become part of something bigger and help shape the future of automotive sustainability. Apply today to join our amazing team at Fenix Parts and drive forward your career and our environmental goals. Together, let’s revitalize the way the world views automotive recycling!

Job Description Location: Salary: $70,000 - $75,000 Other Forms of Compensation: At over 300 college & universities around the country, Chartwells Higher Education is re-inventing the on-campus dining experience. We are challenging the norm and setting new standards by investing in high-tech, food-infused social spaces that bring people together to promote meaningful relationships and interactions. We are food-forward difference makers, bound together by a desire to feed hungry minds and prepare students for success. We are seeking hungry, humble and smart associates who are looking to join and grow with a diverse organization. We invite you to start your career journey with us and look forward to hearing from you. Job Summary As an Assistant Director of Dining Services I, you will be responsible for assisting with the day-to-day food service operations of a medium to large volume location. You will manage and lead a team of associates, and will be responsible for talent development, managing client relationships, profitability, and supporting financial goals in an assigned area. Essential Duties and Responsibilities: • Works with the Chef and management team in creating nutritious and top quality food., • Implements new culinary programs in conjunction with the marketing and culinary teams., • Maintains excellent relationships with the client., • Manages, trains, and develops associates., • Performs other duties as assigned. Qualifications: • 1 to 3 years of food service management experience., • Experience in restaurants, hotels, corporate dining, education, military, health care, and/or related food service operations., • Strong leadership and communication skills., • Financial experience and business acumen skills., • Proficient computer skills and knowledge of MS Office products, including Word, Excel, PowerPoint, Outlook, and internet., • Associate’s degree is preferred. Apply to Chartwells Higher Education today! Chartwells Higher Education is a member of Compass Group USA Click here to Learn More about the Compass Story Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. Applications are accepted on an ongoing basis. Chartwells Higher Ed maintains a drug-free workplace. Associates at Chartwells Higher Ed are offered many fantastic benefits. • Medical, • Dental, • Vision, • Life Insurance/ AD, • Disability Insurance, • Retirement Plan, • Paid Time Off, • Holiday Time Off (varies by site/state), • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs), • Paid Parental Leave, • Personal Leave Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. https://www.compass-usa.com/wp-content/uploads/2023/08/2023WageTransparencyChartwellsHED.pdf Certain positions may require Florida Level 2 background screening. Details: https://info.flclearinghouse.com/ Req ID: 1515142 Chartwells HE KRISTINA MCCARTHY [[req_classification]]

Job Description The Network Performance Specialist – Housing, will work within the Social Care Network (SCN) Team in the Southern Tier region of New York and will be responsible for managing successful participation and performance of housing services by participating organizations. As a local subject matter expert in this field, this role will integrate continuous improvement in program design, execution and monitoring by helping to identify best practices, promote workflow enhancements, and host stakeholder communications with contracted organizations. This position reports to the Network Operations Manager. Essential Functions: • Serves as a regional expert of the 1115 waiver health-related social need (HRSN) enhanced housing services, working to ensure eligible services are delivered in a timely manner across the Southern Tier region, and provides recommendations that improve enhanced service delivery across a network of community-based organizations (CBOs)., • Maintains enhanced knowledge of NYS Department of Health (DOH) HRSN housing requirements and maintains a strong understanding of existing housing supports, services, and offerings in the Southern Tier region. Leverage local and national CBO expertise to share best practices for HRSN housing services., • Develops and deploys materials to support hiring, onboarding, and training to support CBOs providing HRSN housing services in the Southern Tier and ensures that network participants are aware of programmatic requirements and best practices to ensure they meet and can maintain the defined readiness criteria., • Seamlessly utilizes the Care Compass Unite Us system in support of housing-related service delivery, providing recommendations for system enhancements., • Directly supports local CBOs to integrate and synergize existing regional housing services with the 1115 waiver enhanced housing services to build sustainable HRSN housing capacity and provides tailored support to CBOs in this area as needed. Regularly coordinates and collects feedback with CBOs and network staff who provide HRSN housing services, garnering input on the salient challenges and barriers they are facing and collaborates around productive solutions. Creates and executes timely action plans for identified gaps or deficiencies in this area as needed., • Responsible for managing social care network performance in the focus area of HRSN housing including but not limited to monthly reviews of performance data, reviewing services provided against outstanding referrals to identify gaps, and challenges with access to HRSN housing services., • Integrates continuous improvement in housing service delivery. As needed, works with the Network Operations Manager to develop performance improvement plans (PIP) or corrective action plans for CBOs to address housing service deficiencies, which may include supplementary training and technical assistance., • Provides performance reports (scorecards) to organizations providing HRSN housing services in the SCN, utilizing data analysis techniques to convey opportunities for remediation and influence needed workflow changes. As necessary, facilitate training on network/CBO performance improvement and performance monitoring. Track and communicate partner performance to internal and external stakeholders to ensure the social care network is meeting expectations. MINIMUM REQUIREMENTS: • Education: Bachelor’s degree required and at least 3-5 years’ experience managing projects., • Experience with either screening, navigation, or case management activities, ideally with low-income or Medicaid individuals., • Ability to work in a high pace environment and with the ambiguity & change that comes with a new program., • Consistently utilizes critical thinking skills to resolve issues/challenges in workflows, generate process maps, and manages program performance., • Ability to convey complex or technical information in a manner that others can understand, and ability to understand and interpret complex information from others., • Results-driven and client-focused, • Skilled with personal computer programs such as Microsoft Outlook, Microsoft Office (Word, Excel PowerPoint, etc.), • Facilitation of meetings either in person or via virtual platforms such as Zoom. WORK ENVIRONMENT: Care Compass Network utilizes a hybrid work model where employees are able to work remotely from a home office or from the CCN office, a non-clinical professional office setting. There may be some travel required for partner and/or network meetings. BENEFITS: • Outstanding benefits package (Medical, Dental and Vision, plus much more!), • 401(k) with match, • Competitive wages, • 14 paid holidays, paid time off (vacation, personal and sick time)

Job Description Location: Binghamton University • We are hiring immediately for an ADMIN ASSISTANT position., • Address: Binghamton University - 4400 Vestal Parkway East, Binghamton, NY 13902. Note: online applications accepted only., • Schedule: Monday–Friday schedule, with occasional evening and weekend work as needed. More details are available upon interview., • Requirement: Must have excellent customer service skills, proficiency in Microsoft applications, and the ability to multitask effectively., • Pay Range: $20.00 per hour to $25.00 per hour. We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1535998. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: http://olivia.paradox.ai/moSkg Application Deadline: applications are accepted ongoing until all openings are filled for this position. If an applicant is declined due to the position being filled, they may still be considered for future opportunities and are always welcome to reapply. Join our campus team where you are valued and empowered to make a difference. Enjoy competitive wages, benefits, and perks like Instapay through the One @Work app. Our careers are filled with purpose and encourage learning, growth, and meaningful impact. Apply today! Job Summary Summary: Responsible for clerical functions and administrative support of food service programs. Essential Duties and Responsibilities: • Answer telephones and direct inquiries in a professional and client centric manner., • Maintain confidential personnel files., • Assist management staff in preparing confidential employment and labor relations documents, including but not limited to proposed disciplinary notices., • Assist with staffing, including finding staff when employees call out on short notice., • Work effectively and maintain good working relationships with co-workers, school personnel, administrators, student's parents and Supervisor., • Complete and maintain accurate and up to date records of students eligible for free and reduced priced lunches if applicable., • Enter weekly cash sales and meal counts using computer., • Perform daily bank deposit reconciliation., • Process vendor invoices for payment - using computer, making sure addition is correct and checking item prices against bid specifications, making sure there is no discrepancy in pricing., • Perform monthly vendor statement reconciliation., • Prepare monthly state claim form for reimbursement., • Assist in preparation of end of month financial reports., • Attend in-service and/or safety meetings as required., • Maintain clean and safe work environment; ability to perform job safely., • Performs other duties as assigned. The Benefits We are always looking for ways to invest in our people both inside and outside of work to help them achieve their full potential. Both full-time and part-time associates are eligible for the following benefits: • Opportunities for Training and Development, • Retirement Plan, • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program In addition, full-time positions also offer the following benefits to associates: • Medical, • Dental, • Vision, • Life Insurance/AD, • Disability Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Maryland, Washington State, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. https://www.compass-usa.com/wp-content/uploads/2023/08/2023WageTransparencyChartwellsHED.pdf Because this position requires you to perform services in an educational facility, there may be periods when the Company does not require you to perform work (such as winter and summer breaks when food service needs decline or cease). Any such periods during which you do not perform work on the Company’s behalf may be unpaid and deemed a temporary layoff. However, depending on business needs, you may be required to work year-round, potentially at a different location during break periods. Business needs may vary from year to year. Our Commitment to Diversity and Inclusion Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Certain positions may require Florida Level 2 background screening. Details: https://info.flclearinghouse.com/ Applications are accepted on an ongoing basis. Chartwells Higher Ed maintains a drug-free workplace.

Job DescriptionBenefits: • Group life insurance, • Simple IRA, • License reimbursement, • Bonus based on performance, • Competitive salary, • Dental insurance, • Flexible schedule, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development, • Vision insurance ABOUT OUR AGENCY: Our agency opened in 2014 and has grown into a team of 10 who are focused on developing professionals and delivering strong service to our customers. Before becoming an agent, I worked for a State Farm agent, which gave me firsthand experience and helped shape the culture I wanted to build in my own office. Im a graduate of Binghamton University, married with two kids, and spend much of my free time coaching football, baseball, and basketball. Being involved with youth sports and staying connected to families in the community is something I truly enjoy. We offer paid time off, health, dental, and vision coverage, life insurance, retirement benefits, advancement opportunities, and performance-based bonuses. We believe in giving our team the tools and support they need to build a strong future. Our culture is ideal for young professionals looking to take their first step into the professional world. We focus on providing the training, structure, and mentorship needed to become successful insurance and financial professionals. If youre motivated, eager to learn, and ready to build a long-term career, this could be a great place to get started and grow. ROLE DESCRIPTION: Kris Yelverton - State Farm Agent is a leading insurance agency dedicated to providing exceptional service to our customers. We are currently seeking a dynamic individual to join our team as a Receptionist - State Farm Agent Team Member. Our ideal candidate is highly organized, detail-oriented, and committed to contributing to a positive and productive workplace. If you thrive in a supportive role and are eager to learn and grow within the insurance industry, we invite you to apply and become a valued member of our team. RESPONSIBILITIES: • Greet customers warmly in person and over the phone, directing them to the appropriate team members., • Manage appointment scheduling and office communications., • Assist in handling incoming inquiries and maintaining customer records., • Engage in conversations with prospective and existing customers, identifying opportunities to offer insurance options., • Provide excellent customer service and follow up on customers needs., • Support the team with various administrative tasks and projects.QUALIFICATIONS:, • Previous experience in a receptionist or customer service role., • Communication and interpersonal skills., • Organizational and multitasking abilities., • Comfortable with engaging in sales conversations., • Basic computer skills, including Microsoft Office and CRM systems.

Real-world expertise is turned into training data, evaluations, and feedback loops that improve how models perform.AI labs and enterprises use micro1 to train models and build reliable AI agents through advanced evaluations and reinforcement learning environments.Experts contribute directly to how A

Data Scientist Job Duties: Formulates and leads guided, multifaceted analytic studies against large volumes of data.Interprets and analyzes data using exploratory mathematic and statistical tech