Trabajos construction helper en Jersey City, New JerseyCrear alertas

Job DescriptionBenefits: • Paid time off, • Profit sharing We are looking for a qualified plumbing mechanic with 6+ years previous plumbing experience. Established since 1990s, family owned, NYC Plumbing Contractor, based in Manhattan for high end projects. This is a great opportunity for a Plumbing Mechanic and Helper to find a long-term home with a contractor that knows how to treat and compensate our employees. Requirements: • New York City apartment buildings experience., • At least 6+ years experience jobbing and alteration mechanic work for mechanic., • Valid and clean NYS Divers License., • Thorough knowledge of N.Y.C. Plumbing Codes., • Able to read construction blue prints. Experience with both Commercial/Residential work.Additional Requirements:, • At least two past work references that can be verified., • Able to pass drug screen, • Speak, read and write English., • Have a clean driver's licensePay rate will be based on experience and qualifications. Compensation and Benefits: • We offer Top Pay, benefits, Immediate start and more for qualified candidate that meet the above requirements.Job Type: Full-time

Job DescriptionHaddad Plumbing and Heating Inc. is seeking a HVAC Helper to join our team. The HVAC Helper will support the HVAC department by preforming Plumbing and HVAC work and assisting Plumbing / HVAC mechanics with daily tasks and projects Essential Functions • Assist with the Installation, repair and maintenance of all plumbing systems including but not limited to drainage, waste, vent, gas and flue piping, fixtures, faucets, tub & shower valves and water heaters., • Assist with the Installation, repair and maintenance of all HVAC systems including but not limited to hydronic boilers, steam boilers, hot air furnaces, air conditioning systems, piping, controls and ductwork., • Keep the mechanics vehicle organized, stocked with material and clean., • Review and complete assigned training curriculum., • Have hand tools as required by the company., • Wear PPE as established by the company guidelines, • Any other tasks as assigned managerEducation, Qualities & Skills required, • Must have a OSHA 10 or 30, • Organizational and multitasking abilities, • Active listener with excellent communication skills, • Sound judgment and critical thinking, • Professional behavior and conduct, • Must be able to work well individually and with a team.Compensation Starts at $17 Hourly with no experience Benefits Include: • Medical Insurance, • Dental Insurance, • Vision Insurance, • 401(k) Plan with Company Match, • Paid Time Off (PTO), • Paid Holidays, • Paid Vacation, • Opportunities for Career Growth and AdvancementPosition Type and Expected Hours of Work This is a full-time position, Monday – Friday 7:00 am – 3:30 pm and Saturdays as needed per job. About Haddad Plumbing and Heating Inc.: Haddad Plumbing and Heating Inc. is a Commercial Plumbing and HVAC company dedicated to: Providing premier workmanship and consistent delivery of reliable plumbing, heating and HVAC systems. We deliver expertise and professionalism in a competitive marketplace, using innovative techniques and tools to enhance productivity and efficiency, and meet crucial deadlines. Our ultimate goal is deliver better cost returns that will deliver greater value. When Haddad Plumbing & Heating Inc. is awarded a new construction project, our managers apply their expertise to present a comprehensive proposal that meets all requirements. Our in-house drafters then create technical designs and plans to be used by construction engineers. Project managers work closely with the general contractor and team of supervisors to ensure that the project remains on schedule without sacrificing quality work. Finally, our team of project managers with plumbing and HVAC supervisors coordinate when and how plumbing and HVAC systems are synergized and implemented. With all projects, our goal is to earn our clients’ trust to be their plumbing and HVAC contractor of choice, now and in the future. Our success is measured by achieving our clients’ vision and objectives for the project, but going above and beyond their expectations as guided by our core values. Here at Haddad Plumbing and Heating Inc., we earn this privilege with our clients by providing best-in-class service, value, and quality in every project. Powered by JazzHR Axof5ZUwGq

Job Description Join a well-established electrical contracting company that has been growing since 2000. The Electrical Helper will assist electrical mechanics on commercial new construction and residential renovation projects, with opportunities for rapid advancement based on performance. The company offers 10 paid holidays, life insurance, a matching 401(k), a monthly transportation allowance, and paid time off. Responsibilities • Assist electrical mechanics on commercial new construction projects., • Support electrical work during residential renovations, • Follow safety requirements and maintain safety compliance. Required Qualifications • Minimum 2 years of experience working with an electrical construction company., • Helpers must have their own tools., • Electrical Helpers must have a valid NYC SST card.\nCompany Description Great positive culture. Office is conveniently located near the number 1 train and W. 238th Street Station, however, you will seldom have to report to the office and instead report right to the jobsite. Benefits include 10 paid holidays and a transportation allowance. Great positive culture.\nOffice is conveniently located near the number 1 train and W. 238th Street Station, however, you will seldom have to report to the office and instead report right to the jobsite.\nBenefits include 10 paid holidays and a transportation allowance.

Job Description Job Title: Plumber Mechanic Job Description The Plumber Foreman oversees commercial plumbing installations and piping systems, ensuring safe, efficient, and high-quality work across multiple project sites. This role combines hands-on installation of water, waste, steam, and gas piping with leadership responsibilities for a small team of plumbing mechanics. Responsibilities • Install, run, and maintain sewer and waste lines, ensuring proper layout, alignment, and connection to risers and main lines., • Install and maintain gas lines, including plumbing gas lines, water lines, and main lines in commercial environments., • Fabricate, assemble, and install waste, water, steam, and gas piping systems using appropriate materials and fittings., • Work with no-hub cast iron piping systems, including risers and fittings, ensuring proper assembly and secure connections., • Assemble and install pumps, valves, pipe fittings, and plumbing fixtures in accordance with project specifications and codes., • Install branch lines, shower bodies, and other related plumbing components to support building systems and fixtures., • Perform brazing and soldering on copper and other piping materials for plumbing lines, sewer lines, and drain lines., • Interpret drawings, plans, and specifications to plan piping runs, risers, and fixture locations accurately., • Ensure all work complies with applicable codes, safety regulations, and company standards, including OSHA requirements., • Coordinate with other trades and site personnel to maintain workflow and meet project schedules., • Inspect completed work for quality, functionality, and adherence to specifications, making adjustments or repairs as needed., • Maintain tools, equipment, and work areas in a clean, safe, and organized condition., • Support a culture of safety by enforcing safe work practices and proper use of required certifications on site. Essential Skills • 810 years of experience as a plumbing mechanic in commercial plumbing environments., • Strong proficiency in installing and working with copper piping, including brazing and soldering., • Extensive experience with cast iron and no-hub piping systems, including risers and fittings., • Ability to install and run plumbing systems including sewer lines, drain lines, gas lines, water lines, and main lines., • Hands-on experience assembling and installing pumps, valves, pipe fittings, and plumbing fixtures., • Demonstrated ability to install branch lines and shower bodies in accordance with project requirements., • Commercial plumbing experience, including piping layout, installation, and troubleshooting., • Ability to oversee and coordinate a team of up to five helper mechanics on piping and plumbing tasks., • Valid OSHA 30 certification., • Valid Site Safety Training (SST) 10-hour certification., • Plumbing SST certification., • Ability to work safely and effectively with waste, water, steam, and gas piping systems. Additional Skills & Qualifications • F60 and G60 certifications (with F60 or G60 considered a strong plus)., • Experience working with large mechanical contractors or on complex, high-profile projects., • Strong understanding of relevant plumbing codes and safety standards., • Ability to read and interpret technical drawings and specifications., • Effective communication and leadership skills for guiding and mentoring team members., • Strong problem-solving skills and attention to detail in diagnosing and resolving plumbing issues. Why Work Here? You will join a well-established mechanical contractor recognized for delivering major projects across New York City. The role offers the opportunity to work on high-profile, complex builds while providing long-term stability and room for professional growth. You will be part of a team that values craftsmanship, safety, and continuous development, with clear pathways to advance your skills and responsibilities over time. Job Type & Location This is a Contract to Hire position based out of Brooklyn, NY. Pay and Benefits The pay range for this position is $30.00 - $38.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Job Type & Location This is a Contract to Hire position based out of Brooklyn, NY. Application Deadline This position is anticipated to close on Oct 26, 2026. Workplace Type This is a fully onsite position in Brooklyn,NY. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Job Title: Plumber Mechanic Job Description The Plumber Foreman oversees commercial plumbing installations and piping systems, ensuring safe, efficient, and high-quality work across multiple project sites. This role combines hands-on installation of water, waste, steam, and gas piping with leadership responsibilities for a small team of plumbing mechanics. Responsibilities • Install, run, and maintain sewer and waste lines, ensuring proper layout, alignment, and connection to risers and main lines., • Install and maintain gas lines, including plumbing gas lines, water lines, and main lines in commercial environments., • Fabricate, assemble, and install waste, water, steam, and gas piping systems using appropriate materials and fittings., • Work with no-hub cast iron piping systems, including risers and fittings, ensuring proper assembly and secure connections., • Assemble and install pumps, valves, pipe fittings, and plumbing fixtures in accordance with project specifications and codes., • Install branch lines, shower bodies, and other related plumbing components to support building systems and fixtures., • Perform brazing and soldering on copper and other piping materials for plumbing lines, sewer lines, and drain lines., • Interpret drawings, plans, and specifications to plan piping runs, risers, and fixture locations accurately., • Ensure all work complies with applicable codes, safety regulations, and company standards, including OSHA requirements., • Coordinate with other trades and site personnel to maintain workflow and meet project schedules., • Inspect completed work for quality, functionality, and adherence to specifications, making adjustments or repairs as needed., • Maintain tools, equipment, and work areas in a clean, safe, and organized condition., • Support a culture of safety by enforcing safe work practices and proper use of required certifications on site. Essential Skills • 810 years of experience as a plumbing mechanic in commercial plumbing environments., • Strong proficiency in installing and working with copper piping, including brazing and soldering., • Extensive experience with cast iron and no-hub piping systems, including risers and fittings., • Ability to install and run plumbing systems including sewer lines, drain lines, gas lines, water lines, and main lines., • Hands-on experience assembling and installing pumps, valves, pipe fittings, and plumbing fixtures., • Demonstrated ability to install branch lines and shower bodies in accordance with project requirements., • Commercial plumbing experience, including piping layout, installation, and troubleshooting., • Ability to oversee and coordinate a team of up to five helper mechanics on piping and plumbing tasks., • Valid OSHA 30 certification., • Valid Site Safety Training (SST) 10-hour certification., • Plumbing SST certification., • Ability to work safely and effectively with waste, water, steam, and gas piping systems. Additional Skills & Qualifications • F60 and G60 certifications (with F60 or G60 considered a strong plus)., • Experience working with large mechanical contractors or on complex, high-profile projects., • Strong understanding of relevant plumbing codes and safety standards., • Ability to read and interpret technical drawings and specifications., • Effective communication and leadership skills for guiding and mentoring team members., • Strong problem-solving skills and attention to detail in diagnosing and resolving plumbing issues. Why Work Here? You will join a well-established mechanical contractor recognized for delivering major projects across New York City. The role offers the opportunity to work on high-profile, complex builds while providing long-term stability and room for professional growth. You will be part of a team that values craftsmanship, safety, and continuous development, with clear pathways to advance your skills and responsibilities over time. Job Type & Location This is a Contract to Hire position based out of Brooklyn, NY. Pay and Benefits The pay range for this position is $30.00 - $38.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Job Type & Location This is a Contract to Hire position based out of Brooklyn, NY. Application Deadline This position is anticipated to close on Oct 30, 2026. Workplace Type This is a fully onsite position in Brooklyn,NY. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Work alongside an experienced mechanic. Build practical skills. Learn the service side of the trade. We're looking for a dependable Plumbing & Heating Helper / Apprentice who is ready to work, takes direction well, and wants to develop their skills through hands-on experience. You’ll assist a Service Mechanic with daily service calls, repairs, and installations while learning how to troubleshoot problems, care for customers’ property, and keep work moving safely and efficiently. Have construction plumbing experience and want to transition into service? We welcome that background. What You’ll Do • Assist with the installation, maintenance, modification, and repair of plumbing and heating systems., • Help identify leaks, clogs, and other system issues under your mechanic’s supervision., • Support repairs and replacement of piping, fixtures, valves, and related equipment., • Assist with digging, pipe fitting, and the safe use of tools and machinery as directed., • Prepare, carry, and set up tools, equipment, and materials for service calls., • Keep the service vehicle organized and stocked with supplies needed for the day., • Protect customers’ property and maintain clean, organized work areas throughout each visit., • Follow your mechanic’s instructions, communicate progress, and ask questions when guidance is needed., • Follow safety procedures and promptly report hazards or concerns., • Perform other related duties as assigned. What You Bring: • Valid 40-Hour SST card., • F60 and/or G60 a plus, • Basic knowledge of plumbing tools, materials, and fittings., • Willingness to learn service plumbing and heating, accept feedback, and apply what you're taught., • Dependable attendance, punctuality, and clear communication., • Ability to stay focused, follow instructions, and complete assigned tasks within the direction provided., • A professional, respectful attitude toward customers, coworkers, and their property., • Ability to work under pressure while maintaining safe work practices and quality service., • Willingness and availability to work extended hours and overtime as needed, especially during peak season (winter months)., • Valid driver's license with a clean driving record for the past five years, a plus. Physical Requirements: • Ability to safely lift and carry up to 50 lbs. Team lifting or mechanical assistance is required for loads exceeding 50 lbs, • Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA and other federal, state and local standards, including meeting qualitative and/or quantitative productivity standards. The Right Fit You show up ready to work, pay attention, and take pride in doing things correctly. You understand that preparing tools, organizing materials, and cleaning up are essential parts of the job. You ask questions, take initiative within your assigned responsibilities, and want to keep improving. Ready to build your skills and career with P.H. Works? \nCompany Description We are a well-established and rapidly growing licensed plumbing and heating company. We are a well-established and rapidly growing licensed plumbing and heating company.

Job Description Job Title: Box Truck Driver / Furniture Installer Job Description This role combines professional box truck driving with hands-on furniture installation for commercial, event, and trade show clients. You will safely operate a 26 ft. box truck, deliver and install a wide variety of furniture according to detailed floorplans, and provide courteous, high-quality service that ensures each space is fully and accurately set up. Responsibilities • Safely operate a 26 ft. box truck in full compliance with DOT regulations., • Deliver, install, and pick up furniture for residential, commercial, event, and trade show locations., • Follow floorplans and setup instructions to place and assemble furniture accurately., • Protect products during transport by properly securing loads and maintaining an organized truck., • Complete all required paperwork, including delivery documents and pre- and post-trip vehicle inspections., • Assist with warehouse activities, including loading, unloading, shipping, and receiving as needed., • Lead and direct helpers during deliveries to ensure efficient work and excellent customer service., • Use basic tools such as cordless drills and screwdrivers to assemble furniture and related items., • Perform physically demanding tasks, including lifting up to 75 lbs., climbing stairs, bending, and staying active throughout the day., • Set up apartments from start to finish, including assembling beds and placing household items such as kitchenware according to company standards., • Maintain a professional, courteous attitude with clients and represent the company positively at all times., • Support warehouse operations during slower delivery periods by helping with general labor tasks., • Keep vehicles clean, organized, and in good working condition, promptly reporting any issues. Essential Skills • Proven driving experience with a 26 ft. box truck., • Valid drivers license and clean driving record., • Ability to pass a DOT physical and pre-employment drug test., • Strong customer service skills with a professional and courteous demeanor., • Ability to lift up to 75 lbs., climb stairs, bend, and remain physically active for extended periods., • Comfort with physical work, including carrying furniture up and down steps and assembling basic furniture pieces., • Basic tool knowledge, including use of cordless drills, screwdrivers, and similar hand tools., • Attention to detail when following floorplans and setting up apartments completely, from furniture to household items., • Reliability in following schedules and procedures for deliveries, installations, and inspections. Additional Skills & Qualifications • Experience as a box truck driver, delivery driver, mover, or furniture installer., • in general labor, loading, and unloading in a warehouse or delivery environment., • Ability to lead and coordinate the work of a helper during deliveries., • Comfort working in both on-site delivery settings and warehouse operations as needed., • Strong organizational skills to keep vehicles and equipment orderly., • Willingness to work flexible schedules based on delivery volume and client needs. Why Work Here? You join a stable, growth-oriented company with a long track record of success and a team culture that feels like family. The organization offers competitive compensation, a driver sign-on bonus paid out over the first year, and an excellent benefits package that includes medical, dental, vision, life insurance, paid vacation, PTO, and a 401(k) plan. You receive a company phone, frequent overtime opportunities, and access to travel assignments with hotel accommodations and a daily food allowance. The company invests in your well-being through a wellness program and recognizes your commitment with anniversary award gifts. With an ambitious multi-year plan to significantly grow, you benefit from strong long-term career and advancement opportunities. Work Environment You report daily to a warehouse facility in Secaucus, NJ and are paid from the time you arrive at the warehouse until you return at the end of your shift. The role requires flexibility in scheduling, with hours that may vary based on delivery needs. Drivers work with a dedicated helper on each route and use hand trucks, carts, and dollies to assist with loading, unloading, and deliveries. You actively participate in loading and unloading your truck at the warehouse and, during weeks with fewer deliveries, you support warehouse operations through general labor tasks. The environment is physically demanding and hands-on, involving regular lifting, carrying, climbing stairs, and furniture assembly, all supported by appropriate tools and equipment. Job Type & Location This is a Permanent position based out of Secaucus, NJ. Pay and Benefits The pay range for this position is $52000.00 - $52000.00/yr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Competitive pay: Up to $25/ hour $2,500 sign on driver bonus (paid out quarterly over 12 months) Excellent benefits package: medical, dental, vision, life insurance Paid vacation, PTO, 401K, and more Company phone provided LOTS of overtime!!!! A team that feels more like family Growth opportunities with a company thats been thriving for decades 5 year company plan to double in size- alot of growth Will offer travel gigs where they will put them in a hotel and give them an allowance of $65 to spend on food Offer wellness program Anniversary award program with gifts Job Type & Location This is a Permanent position based out of Secaucus, NJ. Application Deadline This position is anticipated to close on Oct 23, 2026. Workplace Type This is a fully onsite position in Secaucus,NJ. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionDescription:G-Net Construction is hiring a full-time Facility Maintenance Helper to support commercial facility maintenance, repair, and service work across NYC. This is a hands-on field position for someone who is reliable, willing to learn, and able to assist with day-to-day maintenance tasks in occupied commercial and institutional buildings. This role is best suited for someone who lives on Staten Island, has a valid driver’s license, communicates well, follows direction, works neatly, and wants to grow within a structured construction and facility maintenance company. Our maintenance work includes preventive maintenance, corrective repairs, emergency facility response support, plumbing and building systems assistance, drywall and painting support, electrical service call support, interior repairs, tenant space repairs, and general facility support. Responsibilities: • Assist maintenance technicians, carpenters, plumbers, electricians, painters, and other trades as needed., • Help with preventive maintenance, corrective repairs, and general facility service calls., • Load, unload, organize, and deliver tools, materials, and equipment., • Assist with drywall, painting, flooring, doors, hardware, ceiling, signage, cabinetry, and general interior repairs., • Assist with basic plumbing, drain cleaning, water heater, and building system support under supervision., • Assist with exterior and site-related maintenance support as directed., • Help set up work areas, protect occupied spaces, and maintain clean job site conditions., • Perform daily cleanup and keep tools, materials, vehicles, and work areas organized., • Follow directions from supervisors, lead mechanics, and office staff., • Communicate clearly regarding job status, materials needed, and field conditions. Required Qualifications: • Must live on Staten Island., • Must have a valid driver’s license., • Must be able to work on the books., • OSHA-40 required for NYC field work., • Must be reliable, punctual, and willing to learn., • Must communicate clearly and follow direction from supervisors., • Must work neatly and keep job sites organized., • Must be physically able to lift, carry, move materials, climb ladders, and perform field work., • Must have basic hand tools, including at minimum a tape measure, hammer, utility knife, tool belt, and basic hand tool set. Preferred Qualifications: • Prior construction, maintenance, laborer, helper, or handyman experience is a plus., • Basic carpentry, painting, drywall, plumbing, electrical, or repair experience is a plus., • Experience working in commercial, school, healthcare, nonprofit, senior care, or occupied buildings is a plus., • Ability to drive a company vehicle when needed is a plus., • Basic blueprint or work order reading is a plus. Growth Opportunity:This position offers room to grow for someone who is dependable, communicates well, takes pride in clean work, and wants to develop practical construction and facility maintenance skills. Motivated employees may have the opportunity to grow into higher-level maintenance, trade helper, mechanic, or lead roles over time. How to Apply:Please apply through our Field Positions page: https://www.gnetconstruction.com/field-positions/ Include your resume, desired hourly rate, years of experience, certifications, and examples of relevant construction, maintenance, repair, or facility service experience. Qualified candidates will be contacted for an in-person interview.

Job Description We are seeking a Carpenter Helper to support residential construction, commercial construction, and remodeling and renovation projects. This role assists with material handling, jobsite preparation and cleanup, tool preparation, and the supervised operation of hand and power tools while contributing to a safe, productive, and collaborative worksite. Responsibilities • Handle and organize materials for carpentry projects., • Clean and maintain jobsites throughout project activities., • Prepare, organize, and maintain tools and equipment., • Set up worksites for residential, commercial, remodeling, and renovation projects., • Operate hand and power tools under supervision., • Support carpentry tasks while following blueprints, workplace safety practices, and team direction. Required Qualifications • Basic carpentry knowledge., • Ability to use a tape measure., • Familiarity with hand tools and power tools., • Experience with material handling., • Ability to read blueprints., • Understanding of workplace safety practices., • Strong teamwork and communication skills. Preferred Qualifications • Two or more years of experience in carpentry support.

Job DescriptionDescription: Controlled Combustion is the leading commercial heating contractor in NYC. We serve a variety of industries, including luxury apartments, hospitals, universities, commercial buildings, and more. With over 150 employees, our team is as diverse as the services we offer. We are looking for a Tank Installation and Repair Helper to join our growing field team. This is a hands-on field position for someone who is dependable, safety-conscious, mechanically inclined, and willing to assist with tank installation, tank repair, and related field work at customer locations. The right candidate should be comfortable working with tools, following instructions, maintaining safe work areas, and supporting experienced field personnel with daily job tasks. This position requires current G-60, F-60, and OSHA 30 certifications. A valid driver’s license and welding certification are strongly preferred. Responsibilities • Assist with tank installation, tank repair, and related field service work at customer locations., • Help prepare, organise, and maintain tools, materials, equipment, and work areas., • Assist with loading, unloading, carrying, setting up, and cleaning job-related equipment and materials., • Support experienced field personnel with measuring, fitting, preparation, clean-up, and general job-site tasks., • Assist with fire watch, safety support, and related job-site responsibilities as required., • Use hand tools and field equipment safely and properly., • Follow instructions from supervisors, mechanics, technicians, and other experienced field personnel., • Maintain clean, organised, and safe work areas., • Follow company safety procedures, customer site requirements, and industry best practices., • Communicate professionally with supervisors, co-workers, customers, and building personnel., • Report safety concerns, equipment issues, or job-site concerns to the appropriate supervisor., • Participate in overtime, weekend work, and schedule changes as needed. Benefits • Dental insurance, • Health insurance, • Paid time off, • Vision insurance, • Room for growth, • Overtime opportunities, • Stable year-round work, • Opportunity to gain hands-on field experience with an established commercial heating company Schedule • 8-hour shift, • Monday to Friday, • Overtime, • Weekends as needed Experience Preferred • Tank installation, tank repair, field helper, trade helper, mechanical helper, construction, maintenance, welding, HVAC, plumbing, pipefitting, or related trade experience preferred., • Experience working safely on commercial job sites preferred., • Experience using hand tools and field equipment preferred., • Welding experience is a plus. License / Certification • G-60 Certificate required., • F-60 Certificate required., • OSHA 30 required., • Driver’s License strongly preferred., • Welding certification strongly preferred. Work Location • In person / field work at customer locationsRequirements: Qualifications / Skills • Current G-60, F-60, and OSHA 30 certifications., • Strong work ethic and willingness to perform hands-on field work., • Mechanical ability and comfort working with tools and equipment., • Interest in tank installation, tank repair, welding, and related field work., • Ability to follow instructions carefully and work under the direction of experienced field personnel., • Safety-conscious and able to follow job-site safety requirements., • Reliable, punctual, dependable, and professional., • Able to work as part of a team in a field environment., • Comfortable with physical work, including lifting, carrying, setting up, cleaning, and assisting with equipment and materials., • Strong attention to safety, detail, and proper work procedures., • Good communication skills with supervisors, co-workers, customers, and building personnel., • Willingness to work overtime, weekends, and adjusted schedules as needed. Minimum Education and Work Experience • High school diploma or equivalent preferred., • Prior field, construction, mechanical, maintenance, welding, HVAC, plumbing, pipefitting, tank work, or related trade experience preferred., • Welding certification or welding experience is strongly preferred.

Job DescriptionBenefits: • Competitive salary, • Opportunity for advancement, • Training & development Bath Tune-Up Bloomfield is growing fast, and we’re looking for a reliable, hardworking Helper to support our Lead Bath Installer on bathroom remodeling projects across Essex County. This is hands-on work—ideal for someone who wants steady hours, strong training, and a path into the skilled trades. Role Overview You’ll assist our experienced installers with demolition, prep work, material handling, installation support, and clean-up. You’ll learn modern remodeling techniques, contribute to high-quality projects, and help deliver a 5-star customer experience. Key Responsibilities • Basic Tiling, • Assist with demolition, debris removal, and jobsite prep, • Carry, stage, and organize materials, tools, and equipment, • Support installation of flooring, vanities, fixtures, wall systems, and shower conversions, • Help set up waterproofing, substrates, and basic plumbing/electrical prep (under supervision), • Measure, cut, and prep materials as directed, • Keep jobsite clean, safe, and customer-ready at all times, • Communicate clearly with the Lead Installer and Project Manager, • Follow all safety procedures and company standards, • Represent Bath Tune-Up professionally inside customers’ homes What We’re Looking For • Reliable, punctual, and eager to learn, • Basic knowledge of hand tools and power tools, • Comfortable doing physical work—lifting, bending, carrying, • Positive attitude and ability to follow direction, • Valid driver’s license preferred, • Prior construction, handyman, moving, or labor experience Compensation & Benefits • Opportunities for growth into Installer roles, • Bonus opportunities, • Supportive, non-toxic work environment About Us Bath Tune-Up Bloomfield is a locally owned, fast-growing remodeling company backed by a national brand. We deliver high-quality bathroom transformations with a trained in-house team—no subcontractors. You’ll be part of a company that values craftsmanship, professionalism, and growth.

Job DescriptionHaddad Plumbing and Heating Inc. is seeking a Plumber Helper to join our team. The Plumber Helper will support the Plumbing department by performing Plumbing work and assist Plumber on daily tasks and projects. Essential Functions • Measure, cut, thread and assemble new pipe, placing the assembled pipe in hangers or other supports., • Cut or drill holes in walls or floors to accommodate the passage of pipes., • Assist pipe fitters in the layout, assembly, and installation of piping for air, gas and water systems., • Cut pipe and lift up to fitters., • Fit or assist in fitting valves, couplings, or assemblies to tanks, pumps, or systems using hand tools., • Mount brackets and hangers on walls and ceilings to hold pipes, and set sleeves or inserts to provide support for pipes., • Excavate and grade ditches, and lay and join pipe for water and sewer service, • Disassemble and remove damaged or worn pipe., • Wear PPE as established by the company guidelines, • Any other tasks as assigned manager Required Education and Experience • Must have a OSHA 10 or 30, • Organizational and multitasking abilities, • Active listener with excellent communication skills, • Sound judgment and critical thinking, • Professional behavior and conduct, • Must be able to work well individually and with a team.Compensation Starts at $17 Hourly with no experience Benefits Include: • Medical Insurance, • Dental Insurance, • Vision Insurance, • 401(k) Plan with Company Match, • Paid Time Off (PTO), • Paid Holidays, • Paid Vacation, • Opportunities for Career Growth and AdvancementPosition Type and Expected Hours of Work This is a full-time position Monday – Saturday 7am-3:30pm. Arrangements for flexibility of schedule on Saturday’s will be arranged with Supervisor. About Haddad Plumbing and Heating Inc.: Haddad Plumbing and Heating Inc. is a Commercial Plumbing and HVAC company dedicated to: Providing premier workmanship and consistent delivery of reliable plumbing, heating and HVAC systems. We deliver expertise and professionalism in a competitive marketplace, using innovative techniques and tools to enhance productivity and efficiency, and meet crucial deadlines. Our ultimate goal is deliver better cost returns that will deliver greater value. When Haddad Plumbing & Heating Inc. is awarded a new construction project, our managers apply their expertise to present a comprehensive proposal that meets all requirements. Our in-house drafters then create technical designs and plans to be used by construction engineers. Project managers work closely with the general contractor and team of supervisors to ensure that the project remains on schedule without sacrificing quality work. Finally, our team of project managers with plumbing and HVAC supervisors coordinate when and how plumbing and HVAC systems are synergized and implemented. With all projects, our goal is to earn our clients’ trust to be their plumbing and HVAC contractor of choice, now and in the future. Our success is measured by achieving our clients’ vision and objectives for the project, but going above and beyond their expectations as guided by our core values. Here at Haddad Plumbing and Heating Inc., we earn this privilege with our clients by providing best-in-class service, value, and quality in every project. Powered by JazzHR o9jrOFjo5u

Job Description We are looking to hire a Sheet Metal and Damper Repair Mechanic Helper to join our team! Your main responsibilities will be to assist lead installing various types of dampers including fire, smoke, and fire/smoke damper, installing duct access doors, and other various sheet metal modifications. Overview A Sheet Metal and Damper Repair Mechanic Helper is responsible for assisting the lead technician in completing inspections on, making repairs to, and installing new fire/smoke dampers in compliance with the National Fire Protection Agency (NPFA) NPFA 90A, NFPA 80, & NFPA 105 standards and in accordance with the Absolute Facilities Group (AFG) Training Methods and Procedures Manual. This position works in all aspects of fire, smoke, and combination dampers within mostly indoor climates, above ceilings, and inside ductwork, working on systems designed and tested as a component of the life safety assemblies. Most of the work takes place primarily in a healthcare setting such as hospitals, clinics, and nursing homes. Role and Responsibilities • MUST show up on time, follow safety and cleanliness protocols, and regulations per the jobsite foreman/manager., • Assist with and perform inspections and repairs on fire/smoke dampers in compliance with the NPFA 90A, NFPA 80, & NFPA 105 standards and in accordance with AFG’s Training Methods and Procedures Manual., • Installing new fire/smoke dampers, installing sheet metal access doors, and other ductwork related modifications., • Misc. maintenance work including minor masonry repairs, fire stopping, cleaning, etc., as needed., • Maintaining jobsite inventory of supplies, site tools and equipment., • Provide accurate and complete documentation of prior conditions and work performed for customer reporting using phone/tablet., • Maintain professional and timely communication with customers and AFG management. Job Requirements • Good verbal and written communication skills., • Must be self-motivated and possess the ability to perform work throughout a facility self-directed which includes communication with customers and staff., • Maintain a professional appearance which includes consistent on-time arrival at job sites., • Administer proper infectious control measures as per hospital requirements when performing inspections and repairs., • Demonstrate ability to read, follow, and label Life Safety Plans/Drawings., • Capable of aligning work schedule with the on-site need for tools and materials, which includes unloading and loading of these materials and tools, and any other necessary equipment., • Some knowledge of computer software preferred (Microsoft Word & Excel, Email, and Adobe Acrobat), • Efficient with smartphones, tablets, computers, and chosen applications for daily reporting., • 20% out-of-town travel required (30+ miles). Additional Requirements • Valid driver license with an acceptable driving record., • Preferred construction experience with basic tools. Physical Demands and Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • 8:00am – 4:00pm regular work hours at jobsites throughout NYC, • The employee is regularly required to stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs & ladders; balance; stoop, kneel, crouch or crawl; talk and hear., • Associate is required to spend 50% or more of inspection and repair time climbing and using various ladders to access dampers., • Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus., • Must be able to lift and/or move up to 40 pounds independently., • Working extended hours which includes evenings and weekends (compensation provided)., • Paid Holidays & Paid Time Off (vacation, sick, personal), • 401k with Employer Matching up to 5%\nCompany Description We specialize in Operation, Inspections, Repairs, and Renovations of Healthcare Facilities in the NYC area. We specialize in Operation, Inspections, Repairs, and Renovations of Healthcare Facilities in the NYC area.

Job Description Laborer / Carpenter Helper needed for basic tasks. Loading and unloading material Light Demo work Site clean up Setting up protection on site Must be able to work night shift if needed. e-mail work history. Looking for candidates that have a desire to work safely. OSHA 30 / SST card required

Flat Bed- Newark, NJ- POWER ONLY CDL Class A Owner Operator - Flatbed Independent Contract Carrier Opportunity $5,000 Sign-on Bonus Grow Your Business with Consistent Delivery Opportunities RAS Logistics is seeking experienced CDL Class A Owner Operators / Independent Contract Carriers to provide flatbed delivery services for a major home improvement retailer. If you own and operate your own transportation business and are looking for consistent opportunities with an established logistics company, we want to hear from you. This opportunity is ideal for professional motor carriers with flatbed experience who value safety, customer service, and dependable work. What the Opportunity Offers Consistent delivery opportunities Routes available up to 6 days per week Competitive contracted rates Weekly settlements Driver-only routes — no helper required Opportunities to grow your business with RAS Logistics Truck discount affiliate program Established customer and delivery network What You'll Be Doing As an Independent Contract Carrier, you will provide professional transportation and delivery services for building and home improvement products. Services may include: Transporting building and home improvement materials using flatbed equipment Completing scheduled deliveries to customer locations and job sites Properly securing freight in accordance with applicable DOT requirements Conducting required pre-trip and post-trip inspections Maintaining required transportation and delivery documentation Communicating professionally with dispatch, warehouse teams, and customers Providing safe, dependable, and customer-focused delivery service Operating a trailer-mounted forklift/Moffett when applicable Carrier Requirements Independent Contract Carriers must: Operate as a legal business entity Have or be able to obtain their own Interstate Motor Carrier Authority Maintain required USDOT and MC authority Provide required Certificates of Insurance, including applicable: Auto Liability General Liability Umbrella/Excess Liability Cargo Workers' Compensation or Occupational Accident/Workers Injury coverage, as applicable Provide their own tractor/power unit Tandem-axle day cab preferred Have a qualified CDL Class A driver Meet applicable DOT and safety requirements Successfully complete required background and qualification processes Maintain strong customer service and communication standards Preferred Experience Flatbed delivery experience Building materials or home improvement delivery experience Moffett / truck-mounted forklift experience Experience securing oversized, building-material, or construction-related freight Familiarity with customer and job-site deliveries Ready to Put Your Truck to Work? Bring your truck. Run your business. Grow with RAS Logistics. We're looking for dependable Owner Operators and Independent Contract Carriers who are ready to build a long-term business relationship with RAS Logistics. Apply today to learn more about available routes, contracted rates, equipment requirements, and onboarding.

Flat Bed- Newark, NJ- POWER ONLY CDL Class A Owner Operator - Flatbed Independent Contract Carrier Opportunity $5,000 Sign-on Bonus Grow Your Business with Consistent Delivery Opportunities RAS Logistics is seeking experienced CDL Class A Owner Operators / Independent Contract Carriers to provide flatbed delivery services for a major home improvement retailer. If you own and operate your own transportation business and are looking for consistent opportunities with an established logistics company, we want to hear from you. This opportunity is ideal for professional motor carriers with flatbed experience who value safety, customer service, and dependable work. What the Opportunity Offers Consistent delivery opportunities Routes available up to 6 days per week Competitive contracted rates Weekly settlements Driver-only routes — no helper required Opportunities to grow your business with RAS Logistics Truck discount affiliate program Established customer and delivery network What You'll Be Doing As an Independent Contract Carrier, you will provide professional transportation and delivery services for building and home improvement products. Services may include: Transporting building and home improvement materials using flatbed equipment Completing scheduled deliveries to customer locations and job sites Properly securing freight in accordance with applicable DOT requirements Conducting required pre-trip and post-trip inspections Maintaining required transportation and delivery documentation Communicating professionally with dispatch, warehouse teams, and customers Providing safe, dependable, and customer-focused delivery service Operating a trailer-mounted forklift/Moffett when applicable Carrier Requirements Independent Contract Carriers must: Operate as a legal business entity Have or be able to obtain their own Interstate Motor Carrier Authority Maintain required USDOT and MC authority Provide required Certificates of Insurance, including applicable: Auto Liability General Liability Umbrella/Excess Liability Cargo Workers' Compensation or Occupational Accident/Workers Injury coverage, as applicable Provide their own tractor/power unit Tandem-axle day cab preferred Have a qualified CDL Class A driver Meet applicable DOT and safety requirements Successfully complete required background and qualification processes Maintain strong customer service and communication standards Preferred Experience Flatbed delivery experience Building materials or home improvement delivery experience Moffett / truck-mounted forklift experience Experience securing oversized, building-material, or construction-related freight Familiarity with customer and job-site deliveries Ready to Put Your Truck to Work? Bring your truck. Run your business. Grow with RAS Logistics. We're looking for dependable Owner Operators and Independent Contract Carriers who are ready to build a long-term business relationship with RAS Logistics. Apply today to learn more about available routes, contracted rates, equipment requirements, and onboarding.

Precision Elevator Corp. - Brooklyn, NY Salary Range $25.00 - $30.00 Hourly Level Entry Position Type Full Time Job Shift Any Travel Percentage Road Warrior Category Construction Precision Elevator is part of American Elevator Group (AEG), the largest independent elevator service company in North America, consisting of a collection of well-established elevator service companies operating throughout the United States. Backed by Arcline Investment Management, AEG has a significant footprint in the elevator industry and is rapidly growing. Due to growth, we are looking for a Construction Helper to work out of the Brooklyn, NY area. As an Elevator Helper you will be responsible for assisting the Mechanic on maintenance jobs, keeping the tools and job site organized, running parts and materials, and maintaining tools, equipment and components to ensure safe work practices. Responsibilities: • Assist the Mechanic with the service of elevators., • Transport tools, equipment, and materials to and from work sites., • Hold, position, and secure parts during installation or repair tasks., • Clean machine parts, rails, and cables as instructed., • Follow safety protocols and guidelines to ensure a safe work environment., • Help with troubleshooting and diagnosing mechanical and electrical issues., • Maintain a clean and organized work environment at job sites., • Performs other duties as assigned., • Minimum of 2 years' relevant experience., • Must possess a High School diploma or equivalent, • Previous knowledge and experience with either hydraulics, electrical, engines or HVAC is a must., • Previous elevator experience or technical military training is highly preferred., • Strong attention to detail., • Physical ability to lift heavy equipment and work in confined spaces., • Valid driver's license and must be able to drive a cargo van. Work Environment & Hazards: • The Elevator Helper will work in a variety of settings, including commercial buildings, hospitals, airports, and residential complexes., • The job may involve working at heights or in confined spaces., • Hazards may include electrical shock, falls, and exposure to hazardous chemicals. Special Physical Demands: • The Elevator Helper must be able to lift heavy equipment up to fifty pounds (50lbs) or more, climb ladders, and work in confined spaces., • The job may require standing for prolonged periods of time and working in awkward position. Work Contact Group: • Moderate contact with internal departments, regulatory agencies, customers, contractors, and management. We are proud to offer a comprehensive benefits package designed to support the health, well-being, and professional growth of our team. Benefits include competitive salary, 90% employer covered health insurance, dental, and vision insurance, alongside various employer sponsored benefits. Highly competitive 401(k) safe harbor match which is 100% vested upon plan entry, generous paid time off, flexible work arrangements, professional development opportunities with tuition reimbursement, and more! American Elevator Group (AEG) invests in our people through company-sponsored Certified Elevator Technician (CET) training. Obtaining this certification empowers our employees to expand their expertise and build long-term careers in the elevator industry. AEG is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, national origin, ancestry, sex, sexual orientation, gender identity or expression, religion, age, pregnancy, disability, work-related injury, covered veteran status, political ideology, marital status, or any other factor that the law protects from employment discrimination.

Three years of full-time satisfactory experience as a mechanic, journeyperson or helper in the electrical trades, the mechanical trades, or the construction or maintenance of buildings; or.

Overnight Maintenance Technician | Commercial Office, NYC | $34-$36 per hour.Hays Facilities Management are partnered with a leading building owner to hire an Overnight Maintenance Technician.The job duties of the Overnight Maintenance Tech will include, among others:.Oversight of maintenance relate

McElroy, Deutsch, Mulvaney & Carpenter, LLP has nearly 120 attorneys working from 11 offices across 9 states.We deliver comprehensive legal services to individuals, corporations, and public and private organizations, spanning a variety of industries and professional disciplines.McElroy Deutsch is se

This ideal candidate is an expert with strong, hands-on expertise across multiple construction and building systems and the ability to manage routine repairs and custom projects with precision and professionalism. Demonstrated experience as a skilled tradesperson (carpentry, electrical, plumbing, HV

Background in architecture, construction, luxury residential, or related design-focused industries is highly beneficial. Bachelor’s degree in Business, Marketing, Architecture, Construction Management, or a related field, or equivalent experience. The Sales Director is a full-time remote role resp

Pratt Industries - - Responsibilities: Train in corrugating department as machine operator; Operate forklift and other machinery; Read a tape measure and perform basic math; Lift and load materials; Follow safety and operational guidelines.

This ideal candidate is an expert with strong, hands-on expertise across multiple construction and building systems and the ability to manage routine repairs and custom projects with precision and professionalism. Demonstrated experience as a skilled tradesperson (carpentry, electrical, plumbing, HV

Highgate Hotels - 700 8th Avenue - Responsibilities: Paint designated areas; Perform furniture repair; Maintain repair and preventive maintenance records; Repair and finish sheet rock; Repair all types of wall coverings.

This ideal candidate is an expert with strong, hands-on expertise across multiple construction and building systems and the ability to manage routine repairs and custom projects with precision and professionalism. Demonstrated experience as a skilled tradesperson (carpentry, electrical, plumbing, HV

GreyStar - - Responsibilities: Diagnose and repair residents' service requests; Complete make-ready process for vacants and inspections; Manage inventory and reorder supplies; Document service requests and maintenance actions; Maintain grounds, clean areas, and perform painting.

Demonstrated experience as a skilled tradesperson (carpentry, electrical, plumbing, HVAC, and/or general construction). This ideal candidate is an expert with strong, hands-on expertise across multiple construction and building systems and the ability to manage routine repairs and custom projects wi

Aerotek - - Responsibilities: Steel stud framing; Hanging drywall; Installing floor joists; Reading blueprints; Laying track for steel studs.

Our delivery drivers not only make sure the customers' products arrive at their destination at the arranged times and in good condition, but they are the face of our company – building lasting relationships with our customers! As a Driver, Helper Non Formula, you will assist the Driver in every as

Requirements Must have working knowledge of multiple phases of construction Minimum 2 years experience in any or all areas listed 1.

Maintenance Technician Delhi New York (US) Engineering & Technology 40+.As the Maintenance Mechanic, your role is to troubleshoot and maintain all mechanical, electrical, and electronic equipment in the manufacturing facility.This includes working with three-phase electrical systems, PLC automated p

Carpenter Job Duties: Installs foundations, walls, floors, ceilings, and roofs using materials such as: wood, steel, metal, concrete, plastics, and composites of multiple materials.Fits and installs window frames, doors, door frames, door hardware, interior and exterior trim using a carpenter's leve

Want a Maintenance Technician role where you’re respected, highly paid, and get up to a month of paid holidays? JCMLiving is looking for a skilled, hardworking Maintenance Technician to join our team.We don’t just offer a job—we offer a stable, long-term career with a solid management team th

Requirements Must have working knowledge of multiple phases of construction Minimum 2 years experience in any or all areas listed 1.

Meyer Jabara Hotels - 133-36 37th Avenue - Responsibilities: Manage the physical operations of the hotel to ensure the total comfort and satisfaction of hotel guests; Check and perform major repairs to refrigeration, heating, ventilation and air conditioning, plumbing, water treatment, and electrica

Maintenance TechnicianVolunteers of America–Greater New York (VOA–Greater New York) is a leading anti-poverty organization serving neighbors in need across New York City, Northern New Jersey, and Westchester.Through 70+ programs, we support over 35,000 adults and children each year, including in

Martin & Sons, LLC, is a third-generation, family-owned/family-friendly manufacturer & distributor of quality meat & cheese products.With locations in Stevens & Womesldorf, PA.We are committed to the satisfaction, safety, well-being, and professional development of our employees.If you're looking fo

Carpenter - Journeyman Job Duties: • Installing foundations, walls, floors, ceilings, and roofs using materials such as: wood, steel, metal, concrete, plastics, and composites of multiple materials • Fitting and installing window frames, doors, door frames, door hardware, interior and exterior t

Job Description *$1,000 SIGN ON BONUS* Kendal at Hanover is a non-profit Continuing Care Retirement Community, employing over 300 staff members and home to 400 residents.We believe in providing a rich environment for growth and learning in a manner that works for you, including an emphasis on tr

Related Management Company is seeking a Maintenance Technician to handle a range of repairs and preventive maintenance on a multifamily portfolio.You will complete resident work orders, prepare units for renters, and maintain grounds and amenities on-site.The role requires 2 years in general mainten