Control system lead engineer jobs in Edison, New JerseyCreate job alerts

Job DescriptionDescriptionCME Associates is seeking a Senior Mechanical Engineer to join our growing team in East Brunswick, NJ. In this role, you will oversee the design and implementation of mechanical systems, including HVAC, plumbing, and fire protection, across a wide range of projects such as county and municipal facilities, schools, water treatment plants, wastewater treatment plants, and other infrastructure developments. This is an opportunity to step into a high-impact leadership role, working closely with clients while mentoring a team of junior engineers and helping drive projects from design through construction. If you enjoy hands-on engineering work, solving complex infrastructure challenges, and guiding younger engineers, this role offers both technical depth and leadership opportunity. What You’ll Work On Projects span a range of public and institutional facilities, including HVAC system upgrades, fire protection and plumbing systems, and mechanical improvements for schools, municipal buildings, and infrastructure facilities. You’ll help bring several active projects across the finish line while also contributing to new designs and future initiatives, working closely with clients, contractors, and multidisciplinary engineering teams. ResponsibilitiesMechanical System Design • Conduct feasibility studies to evaluate project requirements, technical constraints, and cost implications., • Lead the design of HVAC, plumbing, and fire protection systems, • Perform system sizing, load calculations, and equipment selection, • Prepare drawings, specifications, and construction documentsProject Leadership, • Manage multiple projects at various stages of completion, • Coordinate closely with architects, civil engineers, and electrical engineers, • Serve as a key technical contact for clients and project partnersConstruction & Implementation, • Review shop drawings, equipment submittals, and contractor documentation, • Conduct site visits and inspections to evaluate system conditions, • Support commissioning, troubleshooting, and final system performanceTeam Mentorship, • Provide technical guidance to junior mechanical engineers, • Bachelor’s degree in Mechanical Engineering or related field, • 10+ years of mechanical engineering experience, • Strong experience designing HVAC systems, • Experience with plumbing and fire protection systems, • Experience working on municipal, institutional, or infrastructure projects, • Ability to manage multiple projects and coordinate with clients and contractorsPreferred, • Professional Engineer (PE) license (NJ preferred), • Experience with AutoCAD or Revit, • Knowledge of ASHRAE and NFPA codes

Job Description Are you a precision-focused construction pro with a keen eye for detail and the persuasive chops of a top-tier salesperson? We're not just looking for an estimator; we're seeking a dynamic deal-closer—a Sales Estimator to be the architect of our profitable growth. This is a high-impact, professional role where your technical expertise in complex estimating meets your ability to forge lasting customer relationships and secure high-value sales. If you're ready to use your deep estimating experience to master project specifications, drive technical sales, and directly impact our bottom line, join our team! Your Mission: Estimating & Sales Execution You will serve as the crucial link between project scope and profitable execution, utilizing a powerful combination of technical mastery and commercial savvy. 1. Strategic Project Analysis & Bidding: • Decipher the Blueprint: Conduct an exhaustive study, evaluation, and understanding of complex job plans, construction specifications, and technical scope documents., • The Precision Take-Off: Lead the charge in preparing meticulous take-offs and estimates by researching all contracts, job specifications, and schematic drawings. Your estimates will be the foundation for project success, accounting for material, labor, logistics, and ensuring alignment with company profit policies., • Secure the Win: Prepare the final, compelling quote and deploy your sales acumen to aggressively secure the sale, transforming estimates into awarded contracts., • Public Sector Scout: Proactively research and identify public bid opportunities for lucrative government and municipal projects., • Doubt Destroyer: Submit any necessary Requests for Information (RFIs) to the job owner to ensure absolute clarity and a risk-free quote. 2. Product & Process Command: • Technical Guru: Maintain a deep, up-to-date knowledge of the company's products, services, and technical capabilities, including materials, specifications, functionality, and assembly requirements., • Estimation Integrity: Rigorously document all estimating logic, technical details, and analysis using MS Excel or industry-standard estimating software., • Continuous Insight: Monitor overall sales and product trends to quantify the value and market position of various product lines. 3. Sales, Customer Focus & Account Leadership: • Relationship Architect: Establish personal rapport with direct decision-makers and their technical staff within customer, contractor, and government agencies., • High-Touch Service: Serve as the primary point of contact, expertly responding to customer inquiries, issues, and complaints to ensure complete, raving satisfaction. Proactively manage product returns, replacements, and project scope changes., • Key Account Steward: Manage key account relationships with surgical precision to maximize retention of existing business and aggressively pursue new business opportunities., • Bid Agility: Quickly revise bid documents to accurately reflect any changes in project scope, materials, or technical requirements. 4. Interdepartmental Synergy: • Procurement Partner: Collaborate closely with the Purchasing team for the most efficient and cost-effective procurement of required materials, considering vendor performance, competitive pricing, and critical product certifications., • Logistics & Finance Coordinator: Seamlessly coordinate with internal Warehouse and Accounting departments to ensure accurate inventory levels, timely delivery schedules, and smooth payment processing. What You Bring: The Winning Profile • Elite Construction Estimating Experience: At least four to six years of successful, hands-on experience in construction, manufacturing, or a related technical estimating position with direct exposure to complex projects., • Degree of Distinction: Bachelor’s Degree in Construction Management, Engineering, Manufacturing, or a related technical field is highly preferred., • Sales & Service Power: A minimum of two years of successful experience in sales and customer service within a commercial B2B or B2G sales model., • Estimating & Pricing Mastery: Expert, demonstrable knowledge of construction estimation methodologies, quotation protocol, and advanced pricing strategies., • Blueprint Proficiency: Exceptional ability to read, comprehend, and interpret detailed specifications and trade drawings to fully understand the complete spectrum of job requirements., • Independent Drive: Proven capacity to develop and optimize personal procedures and processes for efficiently managing and completing high-volume work assignments., • Technical Toolkit: Advanced proficiency with MS Office applications (especially Excel for complex calculations) and strong familiarity with CRM software. Intelligent Traffic Supply Products, LLC (ITSP) is the leading specialized provider for modernizing New Jersey's roadways. We don't just supply traffic equipment—we engineer and deliver the precision components that form the backbone of Intelligent Transportation Systems (ITS) across the state. We specialize in the expert assembly and distribution of custom-built, high-specification traffic control solutions for a rapidly expanding base of municipal clients. Our comprehensive suite of products is crucial for building safer, smarter, and more efficient urban environments. It includes: At ITSP, we are dedicated to building the future of New Jersey's traffic flow, one smart solution at a time.Intelligent Traffic Supply Products, LLC\r\n\r\nIntelligent Traffic Supply Products, LLC (ITSP) is the leading specialized provider for modernizing New Jersey's roadways.\r\n\r\nWe don't just supply traffic equipment—we engineer and deliver the precision components that form the backbone of Intelligent Transportation Systems (ITS) across the state. We specialize in the expert assembly and distribution of custom-built, high-specification traffic control solutions for a rapidly expanding base of municipal clients.\r\n\r\nOur comprehensive suite of products is crucial for building safer, smarter, and more efficient urban environments. It includes:\r\n\r\n* Advanced Control Systems: Cubic ITS signal controllers and sophisticated system communications equipment.\r\n* Infrastructure Components: Traffic signal assemblies, durable traffic poles, and assorted hardware and software.\r\n* Detection & Safety: Cutting-edge pedestrian and vehicle detection technology, and complete pedestrian crosswalk systems.\r\n\r\nAt ITSP, we are dedicated to building the future of New Jersey's traffic flow, one smart solution at a time.

Job DescriptionCompany Description BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletising, packaging, sortation and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description General Responsibility Are you a seasoned engineering professional with a passion for automation and innovation? As a Senior Controls Engineer at BEUMER Group, you will lead the design, development, and implementation of advanced control systems for high-speed sortation and conveyors-based material handling solutions. This strategic and hands-on role requires deep technical expertise, leadership capabilities, and a collaborative mindset to drive excellence in fulfilment automation. Responsibilities • Lead the design and programming of machine controls for BEUMER high-speed sortation systems., • Architect scalable and modular PLC and HMI solutions tailored to customer specifications., • Oversee hardware selection, I/O mapping, and control logic development across multiple platforms., • Collaborate cross-functionally with electrical, mechanical, and software engineering teams., • Mentor junior engineers and provide technical leadership throughout project lifecycles., • Conduct system emulation and validation testing to ensure performance and reliability., • Manage on-site commissioning and troubleshoot complex system behaviors., • Develop and maintain comprehensive documentation, standards, and training materials., • Drive continuous improvement initiatives and contribute to R&D efforts. Requirements/Skills and Abilities: Education & Experience: • Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering, or related field., • 10+ years of experience in controls engineering, preferably in the material handling or automation industry., • Advanced proficiency in programming Allen-Bradley and/or Siemens PLCs., • Expertise in SCADA systems, especially Ignition platform development and integration., • Strong understanding of industrial communication protocols and industrial networks (Ethernet/IP, Profibus, ProfiNet etc.), • Experience with safety systems, motion control, and robotic integration is a plus., • Excellent communication and leadership skills., • Strong analytical and problem-solving abilities., • Ability to manage multiple priorities and mentor team members., • Willingness to travel nationally and internationally up to 30% for project execution. Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees. • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most!, • Performance-Based Bonus: Eligibility to participate in our Target Agreement Plan for bonus potential.

Job Description Senior Controls Engineer – Machine Control & SCADA Somerset, NJ| Full-Time Are you a hands-on controls engineer who loves making high-speed machines run smarter, faster, and more reliably? We’re looking for a Senior Controls Engineer to own development and support of machine control systems for high-speed sorters, with additional work in packaging, palletizing/robotics, and material handling systems. What You’ll Do • Design, program, and maintain PLC-based machine control systems (high-speed sortation + packaging/palletizing)., • Lead development and enhancement of core control technologies, including documentation and training., • Program and commission Allen-Bradley and Siemens PLCs; prepare, test, and troubleshoot PLC hardware., • Develop and integrate SCADA systems, especially using Ignition by Inductive Automation., • Turn customer requirements and electrical drawings into robust control logic and system architectures., • Collaborate with R&D, engineering, PM, sales, and customer service teams globally., • Bachelor’s or Master’s in Controls Engineering or related field (or equivalent experience)., • 10+ years of relevant experience in machine control / industrial automation., • Deep expertise in Allen-Bradley and Siemens PLCs; experience with other PLCs is a plus., • Strong background in advanced control concepts and applied math for controls., • Proven experience with SCADA development, ideally Ignition (design, implementation, maintenance)., • Able to independently tackle complex controls challenges and own solutions from concept through commissioning., • Willingness to travel up to ~40% nationally and internationally. Company DescriptionWe care about the success of each member of out team! We strive for long lasting partnerships where you can grow and expand your career.We care about the success of each member of out team! We strive for long lasting partnerships where you can grow and expand your career.

Job Description Job Summary: Attalon is seeking a Senior Principal Electrical Engineer to lead the design of complex system circuit boards required in challenging products for the Aerospace and Defense industry. Responsible for both system level and detailed circuit design, modeling, and simulation for laser-based products. Circuit designs will include laser diodes, photodetectors, modulator drivers, TIAs, temperature controllers, clock sources and FPGAs, multilayer and matched RF signals with high isolation. Provide technical leadership to less experienced electrical engineers across the organization. Primary Duties & Responsibilities: • Drive the electrical architecture of system circuit boards to meet customer specifications., • Lead the design of high-density multi-layer PCBAs from initial concept to completion., • Execute circuit designs that utilize a high degree of E/O and O/E functions., • Create schematic drawings/BOMs and monitor PCB layouts., • Perform electrical simulations and power analysis., • Support customer reviews required to pass design development gates., • Execute the integration of electronics, FPGAs and software/firmware supporting all phases of testing., • Develop test specifications and bring up work instructions for designs, • Work with circuit layout subcontractors and board population subcontractors, • Collaborate with cross-functional teams consisting of optical, mechanical and system engineers., • Participates in writing proposals, providing cost and schedule estimates in support of new business., • Provide technical advice to less experienced electrical engineers., • Oversee work assignments across a small team of hardware engineers. Education & Experience: • Bachelor’s degree in electrical/electronic engineering with 15+ years of circuit design experience or Master’s degree with 12+ years’ experience, or Ph.D. with 9+ years’ experience Skills: • Proven expertise in designing high density multi-layer PCBAs., • Strong RF fundamentals and analog circuit design skills required., • Strong background in circuit theory, control loops, high-speed DACs/ADCs, and mixed-signal design., • Design experience with switching power supplies, TEC controllers, laser diode drivers and photodetectors strongly desired., • Experience with programmable logic devices and control system circuit design., • Background in RF signal processing and/or optical fiber system design., • Experience with RF circuit board design for isolation with high-speed small signals and decoupling of high-speed digital lines for A/D and D/A circuits., • Mixed Signal and matched 50/100 ohm microstrip and strip line design practice., • Experience managing noise, jitter, crosstalk, signal integrity on PCB designs., • Knowledge of circuit board thermal and EMI management., • Use of schematic capture tools (Altium, Orcad) and simulators, • Familiar with PCB layout browsers (Altium, PADS, Xpedition)., • Experience with government defense design processes., • Self-motivated, responsible, team player with leadership experience. Equal Opportunity Employer Statement Attalon, Inc. is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. Export Control Compliance This role involves access to technology, materials, software, or hardware subject to U.S. export control laws. Therefore, to be considered, candidates must be classified as a “U.S. Person” under applicable regulations or be eligible for authorization under a U.S. government export license.

Job DescriptionCompany Description BEUMER has operated in the North American market for more than 40 years and has completed over 160 airport baggage handling projects; with fully integrated design and manufacturing systems in the United States. We are a family owned intra-logistics leader where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description The Mechanical Project Engineer is a hands-on individual with the maturity and experience to drive engineering projects from start to finish. This position requires good technical, organizational and communication skills to develop material handling systems. An ideal candidate will have previous mechanical design experience broadened by recent system projects in the material handling industry. The Mechanical Project Engineer reports directly to the Mechanical Engineering Manager. In addition, he/she will work closely with Sales, Project Management, Purchasing and installation personnel on a daily basis. Primary Responsibilities: • Assist Sales in the creation of equipment proposals by providing engineering analysis and design expertise., • Assist Project Managers with system commissioning and field support., • Evaluate and understands project requirements to plan execution of components design and select system components., • Evaluate manufacturing feasibility, estimate cost, and assess maintenance requirements of a variety of material handling systems., • Design systems layout and specific components on 2D and 3D CAD equipment and software Our products could include steel structures, sheet metal parts, mechanisms and other Beumer products. Optimize for cost, functionality and manufacturability, • Write specifications, user’s manuals, and enter other data to fully document engineering designs., • Coordinate, and monitor all aspects of production, including selection of manufacturing methods, fabrication. Assist procurement with parts ordering and supplier selection., • Ability to coordinate the efforts between different fields of engineering, purchasing, project management and site integration, • Maintain accurate records and prepare a variety of meeting notes, letters and technical reports that are clear and concise, • Ability to successfully define technical scope of work for the purchase of sub-systems or components, • Ability to make technical decisions for optimum end results, • Ability to present technical solutions for both internal and external stake holders, • Be able to take lead on multiple logistic projects at the same time. Requirements / Skills / Abilities: • A Bachelor Degree in Mechanical Engineering and related field or equivalent experience, • 6 to 10 years of hands-on experience in a manufacturing and project engineering settings. Preferred experience in design of automated machines and material handling capital equipment, • Prefers a broad background in various machine technologies (control, pneumatic, hydraulic), • Proficient in 2D and 3D modeling CAD design programs, • Ability to analyze and design basic mechanical components by applying knowledge of mechanical engineering, • Ability to specify mechanical, pneumatic and hydraulic components, • Good knowledge of drafting, dimensioning, tolerancing and manufacturing processes, • Excellence in time management; attention to detail and the ability to learn quickly, • Excellence in communication (both verbal and written), • Professional, positive, and have an energetic attitude-excellent interpersonal skills. Self-motivated, trustworthy, and respectful of others, • Ability to travel both domestically and internationally as needed, up to 20%., • Excellent listening skills, • Be able to apply engineering principles and practices to the solution of advanced mechanical engineering problems, • Good Understanding of IBC and OSHA requirements for Material Handling Equipment, • Effective use of project engineering tools, • Expertise of electrical motors, pneumatics, hydraulics and power transmission techniques, • Ability to lead prototype testing efforts of various Material Handling Equipment components and come up with technical solutions Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees. • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most!, • Performance-Based Bonus: Eligibility to participate in our Target Agreement Plan for bonus potential.

Job DescriptionCompany Description BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletising, packaging, sortation and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description BEUMER Group is an international manufacturing leader in intralogistics in the fields of material handling, conveying, loading, palletizing, packaging, sortation, and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description The Project Manager role in the Products line of business is a hands-on position requiring excellent project management, technical, organizational and communication skills. This position is responsible for the planning, management, and execution of the Products segment within North America in the applicable industries such as cement, building materials, alternative fuels and raw materials, consumer goods, and petrochemical industry. Primary Responsibilities • Early engagement with the Sales and engineering team during tendering / sales phase, • Execution of new sales projects from contract signed to handover to customer as well as BEUMER's Customer Support department., • Organizing the projects through the BEUMER Stage Gate model with planning, specifications, design, production, installation/commissioning planning and agreements to execute within the agreed time frame., • Proactive and effective communication with customers, stakeholders, and the project team to ensure transparency, clarity and commitment throughout the project., • Lead a multi-disciplined project team throughout the complete project life cycle in coordination with other entities across BEUMER Group., • Mange key project management processes such as Scope/requirements management, Supply chain management, change management, risk management, etc., • Being proactive, identify, and manage opportunities and risks continuously with the right engagement level of the project stakeholders, manage potential back charges and claims and create essential documentation., • Responsible for the overall project delivery, quality/capacity wise, technically, time frame and financially., • Develop and update project schedule, • Create financial reporting and control the project budget, • Technical clarification with the project engineering team and support to site during installation, commissioning, and final testing., • Compiling report, track project tasks, update monthly status reports, • Coordination and preparation for meetings with customers as well as for internal alignment / reporting, • Follow up on action points and expedite critical activities, • Keep project documents updated and manage changes with the project team, • Support the QSHE department to ensure project health, safety and environmental standards meet or exceed legislated requirements and company policy., • Efficiently close out projects incl. making sure all customer documentation is created and stored and the projects are completely closed in the system., • Min. Bachelor's degree in engineering; mechanical, electrical, software, construction management, or similar technical field. Alternatively, at least 5 years of relevant industrial PM experience., • Project management experience with delivering projects, preferably in the mechatronic/industrial automation industry., • Strong technical background (electrical, mechanical-, marine engineer or similar), • Strong contractual and commercial knowledge and experience to manage projects as per project´s contractual agreement and commercial terms and conditions, • Process oriented and able to implement project management processes based on PMO standards., • Skilled project manager with cross-cultural understanding and good interpersonal, communication and collaboration skills., • Hands-on approach, with the ability to motivate others toward success., • Excellent report writing and presentation skills., • Essential skills include planning and budgeting, project administration, and decision-making / creative problem-solving skills., • Work closely with team members and decision makers to identify, recommend, develop, implement, and support cost-effective project delivery., • Able to interface with all members of the organization in a professional, calm, helpful and courteous manner – including Senior Executive Management, Project Management, engineering, supply chain and external stakeholders., • Strong, independent decision-making ability. Self-starter and possess a strong work ethic with a self-imposed desire to exceed everyday expectations., • Participate in required on-going technical training to be a systems subject matter expert., • Must be willing to travel and work as part of a global team of professionals as required (up to 25 % of the time)., • PMP Certification is required or must obtain PMI/PMP Certification within one year of hire. Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees. • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most!

Job Description Attalon is a leading technology partner to the global aerospace and defense industry, specializing in the physics of light and heat. With over 500 employees in the U.S., Attalon engineers critical optical, laser, and coating technologies that enable systems to see farther, target faster, and survive the harshest environments. From high-energy directed laser systems to satellite optics and hypersonic thermal protection, Attalon equips the warfighter with the advantage of precision. Job Summary: Attalon is seeking an embedded software engineer to contribute to the development of advanced laser systems for defense applications. Primary Duties & Responsibilities: Software Architecture and Design: Works as a member of a cross-disciplinary team of systems engineers, optical engineers, electrical engineers, and FPGA engineers to conceptualize a system solution that meets customer requirements. Responsible for architecting, designing, and documenting software for assigned projects. Creates design documentation including Software Requirements Documents, block diagrams, Software Design Documents, and Interface Control Documents. May serve as the lead software engineer on assigned projects. Software Development and Test: Develops software (primarily embedded) to meet the requirements of the system under development. Writes software test plans and tests software at various levels of integration (unit tests, tests on target architecture, test with target electronics). Writes software scripts and tools to support software development and system test. System Integration and Test Support: Develops Software Test Plans and supports integration and test activities from initial board-level bring up through final system test. New Business Development: Participates in writing proposals and providing cost and schedule estimates in support of new business pursuits. Technical Expertise: Subject matter expert with extensive knowledge and expertise in embedded systems and software development. Works independently with general direction to achieve goals and objectives. Exercises judgment in selecting methods, techniques and evaluation criteria for obtaining results. Makes accurate detailed work plans for complex systems/projects; takes the lead in planning and executing software tasks. Education & Experience: • Typically requires a minimum of 9 years of related experience with a Bachelor’s degree; or 7 years and a Master’s degree; or a PhD with 4 years experience; or equivalent experience. Skills: • Must have significant demonstrated experience in architecting and designing software solutions in embedded systems. Must have deep understanding of tradeoffs involved in hardware/software functional partitioning., • Must have a strong understanding of embedded processor platforms and be familiar with microcontrollers, FPGAs and system-on-chip devices. Experience with AMD/Xilinx platforms is preferred., • Must have significant past experience developing software in C and C++, and a strong background in object-oriented programming. Must have strong debugging and troubleshooting skills. Experience developing in one or more of the following are also highly desirable: C#, Python, LabVIEW., • Must have significant experience developing software for real-time operating systems (RTOS) and/or embedded Linux., • Must have strong understanding of embedded hardware devices, chip-to-chip interfaces, and networking protocols., • Must have demonstrated experience working with cross-disciplinary engineering teams to develop and test highly-functional integrated systems., • Experience working with laser systems is desired but not required. Past experience on high-reliability systems for defense and/or space is desired but not required., • Must be able to obtain/maintain a US Government security clearance if one is required to perform the job responsibilities. Equal Opportunity Employer Statement Attalon, Inc. is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. Export Control Compliance This role involves access to technology, materials, software, or hardware subject to U.S. export control laws. Therefore, to be considered, candidates must be classified as a “U.S. Person” under applicable regulations or be eligible for authorization under a U.S. government export license.

Individual must be able to perform design,engineering, and field start up responsibilities for System Integration in the Electrical Controls Industry. Electrical Controls Engineer/Industrial Electrician. Specify wiring and motor controls for 480V systems.