Trabajos controls engineer en Linden, New JerseyCrear alertas

Job DescriptionHiring for Facilities Maintenance Technician - Building Engineer in Newark, NJ paying up to $34 per hour : Direct Placement Job Description The Facilities Maintenance Technician will be responsible for the daily maintenance and repair of airport building facilities. This includes work on elevators, conveyor systems, mechanical systems, lighting systems, communication/radio systems, air handling/HVAC units, fire systems, plumbing systems, and more. Technicians may also work with PLC electronic systems, computer controls, and steel frame structures. Responsibilities • Perform maintenance and repair tasks on various airport building facilities including elevators, conveyor systems, and HVAC units., • Work with communication and radio systems, fire systems, and plumbing systems., • Engage in high and low voltage electrical repairs, including installation and repair of 110/220/480 volt single and multiphase electrical circuitry., • Read and follow wiring schematics for industrial wiring tasks., • Thorough knowledge of general building maintenance with an emphasis on electrical systems., • Experience in electrical troubleshooting including AC & DC circuits and high voltage (480) repairs., • Experience in industrial maintenance, electrical maintenance, and preventive maintenance., • Ability to read and follow wiring schematics., • Experience in electronics diagnostics and troubleshooting., • Valid, clean, applicable state driver's license., • Journeyman electrical license is a plus., • Experience in related building equipment and trades such as plumbing, steam fitting, and conveyors., • Possession of personal tools required., • Ability to climb and work from ladders, and walk for extended periods., • Moderate lifting capability. Enjoy a $10,000 sign-on bonus with half paid after 30 days and the other half after 12 months. Benefit from yearly pay increases, reaching up to $60.00 an hour after 8 years. Experience extremely competitive benefits. Work Environment The work environment includes both indoor and outdoor settings at airport terminals. Be prepared to work on a flexible schedule that covers all shifts, including weekends and holidays. Schedules are bid and awarded based on seniority. Job Type & Location This is a Permanent position based out of Newark, NJ. Pay and Benefits The pay range for this position is $71802.00 - $71802.00/yr. We offer competitive benefits: medical, dental, vision, life, accident & disability, employee assistance program, commuter, paid holidays, paid time off, 401(k), pension and flight privileges (subject to the respective collective bargaining agreement). See attached SOP. Workplace Type This is a fully onsite position in Newark,NJ. Application Deadline This position is anticipated to close on Apr 30, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

The Senior Automation Controls Engineer is an experienced individual contributor responsible for the design, development, implementation, and support of PLC‑based automation and machine vision systems used in high‑volume manufacturing. This position reports to the Manager – Automation and Cont

Job Description As part of a team you will design and supervise the manufacturing of control and monitoring systems for Commercial and Naval Ships. You will work to produce equipment drawings , electrical wiring diagrams,cable interconnection drawings and interface designs. Assist in the functional design of HMI, PLC architecture, networks and communication interfaces.Perform Factory acceptance test of the finished system to both customer and regulatory societies. Support commissioning and sea trials from the office but at times visiting the ship.Finally provide technical advice and assistance to sales, and service personnel. Company DescriptionWe are a 47 yr old technology company. We manufacture automation for ships. We have offices in NJ and Seattle Washington. We design our own cards write our own software .We provide top pay and benefits. Our products sail the seven seas so it's never boring! The White House just announced a new office of shipbuilding be a part of it.We are a 47 yr old technology company. We manufacture automation for ships. We have offices in NJ\r\nand Seattle Washington. We design our own cards write our own software .We provide top pay and benefits. Our products sail the seven seas so it's never boring! The White House just announced a new office of shipbuilding be a part of it.

Job Description Join a fast-growing MEP consulting firm in Central New Jersey that’s making serious moves across commercial, healthcare, and institutional projects. We’re looking for an Electrical MEP Engineer with 3+ years of experience who’s ready to step into a hands-on role supporting power distribution, lighting design, and coordination with multidisciplinary teams. What You’ll Do: • Design electrical systems including power distribution, lighting, and low-voltage systems, • Perform load calculations, panel schedules, and equipment sizing, • Collaborate with MEP teams, architects, and clients to deliver coordinated designs, • 3+ years of electrical MEP design experience, • Proficiency in Revit and AutoCAD, • Working knowledge of NEC and industry standards, • Exposure to diverse, high-impact projects, • Clear path for growth into Project Engineer/Manager roles, • Flexible hybrid schedule + strong compensation package #midsenior #CivilMEP #li-hybrid Company DescriptionLibertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move! Hundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month. Established in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on: Information Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.Libertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move!\n\nHundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month.\n\nEstablished in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on:\n\nInformation Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.

Job Description Hazen and Sawyer is seeking an HVAC Engineer for our Iselin, NJ office. As part of our HVAC/Plumbing team the selected candidate can expect to work closely with more experienced HVAC Engineers to perform HVAC and Plumbing designs for some of the nation's most challenging and rewarding projects. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK., • A flexible hybrid work schedule supports today's busy professionals.Key Responsibilities: This role focuses on municipal water and wastewater projects including planning, preliminary and final designs, and providing engineering services for projects in construction. The candidate should enjoy working within a team environment, and seek to develop HVAC and Plumbing design skills. Required Qualifications: • Bachelors of Science degree in Mechanical Engineering (preferred)., • Ability to communicate well both orally and in writing., • A minimum of (3) years of experience performing heating, ventilating, cooling, and plumbing design for municipal, commercial or industrial facilities., • A PE license is preferred, or the candidate must have plans of obtaining their PE., • Experience with Revit and other CAD skills is preferred., • Relevant areas of experience includes:, • Application of various types of heating, ventilation, air conditioning, and hydronic piping systems, • Heating and cooling load calculations, • HVAC controls systems and building/facility management systems, • ASME B31.1 Power Piping or ASME B3.9 Building Services Piping designs, • International Mechanical Code, Plumbing Code and Fire Code, • Performance of detailed HVAC and hydraulic pressure drop calculations, • Performance of Plumbing pipe sizing and fixture count analysis, • SMANCA Duct Construction Standards, • NFPA 820 HVAC designs, • Hot water boiler and chilled water system design It is preferable to have experience in the HVAC systems related to water and wastewater facilities, although relevant experience in municipal, industrial or commercial buildings and facilities is acceptable. What We Offer: • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job Description Who we are: Formic is on a mission to reshape American manufacturing by making automation accessible to every factory. As labor constraints rise, costs increase, and global competition intensifies, automation is no longer optional for manufacturers that want to stay competitive. We deliver automation through a Robotics-as-a-Service model that combines industrial robotics, proprietary software, and full-service support into a single, integrated solution. By removing the traditional barriers of cost, complexity, and risk, we enable manufacturers to deploy automation quickly and realize measurable gains in throughput, safety, and operational efficiency without large upfront capital investment. Backed by leading investors including Lux Capital, Initialized Capital, Blackhorn Ventures, and Mitsubishi HC Capital North America, Formic is scaling rapidly and building the foundation for a new era of high-performance, Made in America production. About the team: The Fleet Operations Team drives uptime and operational performance across Formic's growing fleet of deployed robotic systems. Working inside live manufacturing environments, the team diagnoses issues, restores production, and continuously improves system reliability at scale. Fleet Operations operates at the intersection of robotics, controls, and real-world factory execution, ensuring Formic's automation delivers consistent, measurable performance across diverse industrial applications. About the role: As a Robotics Field Service Engineer, you are the front line of technical ownership across Formic's deployed robotic cells. You will diagnose failures, restore systems to production, perform preventative and corrective maintenance, and represent Formic directly within customer facilities. This is a hands-on, high-accountability role in uptime-critical environments. Success requires strong troubleshooting discipline, calm execution during production interruptions, and structured documentation. Your work directly impacts fleet performance, customer satisfaction, and long-term system reliability. In this role you will: • Perform preventative, corrective, and predictive maintenance on robotic manufacturing cells, • Respond to remote and on-site escalations, diagnose root causes, and restore systems quickly, • Provide hands-on technical support to customer operators and maintenance teams, • Log service activity, asset updates, and spare part requirements in CMMS systems, • Coordinate field scheduling and support with customers, vendors, and internal stakeholders, • Monitor system performance remotely using Formic dashboards and fleet tools, • Document service work, root cause analysis, and follow-up actions with clarity and precision, • Identify recurring failure patterns and escalate systemic risks for broader improvement, • Build professional, trusted relationships with plant managers and site personnel, • Operate with strict adherence to safety standards, including LOTO and industrial compliance, • Participate in RCA sessions, audits, and continuous improvement initiatives, • 3+ years of hands-on field service experience supporting robotic or industrial automation systems, • Strong troubleshooting skills across electrical, mechanical, PLC, or robotic control systems, • Ability to read electrical schematics, wiring diagrams, and pneumatic drawings, • Experience using CMMS platforms to track and report maintenance activity, • Comfortable with local travel up to 80% and overnight travel up to 50%, • Clear written and verbal communicator capable of producing structured service documentation, • Experience with 6-axis robot brands such as Fanuc, KUKA, Yaskawa, ABB, or Universal Robots, • Familiarity with palletizing, case packing, pick-and-place, or conveyor systems, • Experience in food, beverage, packaging, CPG, or other high-speed manufacturing environments, • Prior customer-facing field experience, • Equity in Formic: Participate in our stock option program and share in the success of a fast-growing start-up backed by leading global investors, • Competitive & Uncapped Commission Structure: Designed to reward performance and impact in commission-eligible roles, • Comprehensive Healthcare Coverage: Medical, dental, and vision insurance through Blue Cross Blue Shield and Unum, with 99% of employee premiums covered and 75% coverage for dependents, with optional buy-up plans available, • Additional Insurance Benefits: FSA and DCFSA, life insurance, short-term disability, and long-term disability through Unum, all 100% employer-paid, • Employee Assistance Program (EAP): Fully funded by Formic, offering support when you need it most, • Paid Parental Leave Program: Up to 12 weeks of paid parental leave, • Company-sponsored 401(k): Invest in your future with our company-facilitated retirement savings plan, • Home Office Stipend: A one-time allowance for fully remote and hybrid employees to support an at-home or on-the-road work setup, • Monthly Cell Phone Reimbursement: Monthly stipend toward personal phone and internet expenses Final offers are customized based on experience, geographic location, market considerations, and a candidate's preferred balance of cash and equity. Our goal is to attract and reward top talent who will have significant impact, and we are open to thoughtful discussions to align on the right structure. Compensation Range:$29—$44 USD What we look for: We're building this company from the ground up, and every person we hire has an outsized impact on our culture, performance, and trajectory. While each team member brings unique strengths and perspectives, we look for people who align with our Operating Principles and embody them in action. If this sounds like you, Formic may be the right place for you! • Fearless Optimism: You make bold bets and default optimistic. You believe in the mission, aren't paralyzed by risk, and fear inaction more than failure. You see ambiguity as opportunity and bring energy to building what doesn't yet exist., • Create the Magic: You absorb complexity so customers don't have to. Whether your customer is external or internal, you focus on delivering experiences that are clear, fast, value-added, and outcome-driven. You don't say "not my job." You make things work., • Today, Not Tomorrow: You have a bias to action. You close the loop. You take extreme ownership. You understand that speed compounds, and you don't confuse activity with results., • Seek Truth: You think from first principles. You value data over ego and strong opinions loosely held. You're willing to challenge assumptions, including your own, in pursuit of the best answer., • Made of Rubber: You are resolute and adaptable. When things break or priorities shift, you rebound stronger. You treat setbacks as learning moments and move forward with grit. Formic is an equal opportunity employer. We do not discriminate on the basis of race, color, religion or religious creed, sexual orientation, gender, gender identity, marital status, family or parental status, disability, military or veteran status, or any other basis protected by law. All employment decisions are based on a person's merit, business needs, and role requirements. If you require further accommodations or have questions regarding accessibility of our roles, please reach out to . AI Use: At Formic, fairness and transparency are at the heart of our hiring process. We use AI-powered tools in some interviews to help our teams evaluate candidate responses, but all final hiring decisions are made by humans. You can learn more about how AI is used in our recruitment process by reviewing our AI Hiring Disclosure linked here.

Job DescriptionJob Summary: Instrument and Controls Engineer:The Instrument and Controls Technician is involved with the successful daily operation of the oil refining facility, and the modification and alteration of the plants automated control and power systems to accommodate business needs and ensure high plant availability. This requires close collaboration with other employees and management staff to ensure safe work and to set or re-set job priorities. Documentation, as required to document changes in plant physical or logic changes, and documentation to meet our goals of safety first, quality work and compliance with our customers’ requirements and concerns. Qualifications: Instrument and Controls Engineer: • High School Diploma or GED with at least 10 years I&E (I&C) experience in a chemical, food, pharmaceutical manufacturing environment. Familiarity with PLC based controls systems such as GE or Allen Bradley in a manufacturing environment., • Ability to analyze and interpret technical problems related to instrumentation or PLC logic., • Ability to read and understand company policies and procedures, technical datasheets or literature, P&IDs, electrical drawings (One-line drawings, loop drawings, control circuits, etc), • Ability to effectively present information either verbally or via written document (e-mail, MS Word/Excel, CMMS, etc) and respond to questions from groups of managers, co-workers, customers, and the general work force., • Ability to work with and apply mathematical concepts to practical situations., • Preferred: New Jersey Licensed Electrician (or working towards license), • Preferred: ISA Certification (Certified Control System Technician, Certified Industrial Electrician, Certified Instrument Technician)Duties & Responsibilities: Instrument and Controls Engineer:, • Monitor, repair, maintain and troubleshoot all field instrumentation, electrical equipment and controls systems including plant safety systems and plant power systems., • Install, loop check, maintain and troubleshooting process control systems comprised of transmitters, controllers, and valves operating in a PLC system., • Calibrate, monitor, repair, maintain, label and document all field instruments such as transmitters, controllers, valves, PLCs, plant safety systems, plant power systems, utility systems (HVAC), pH and conductivity meters, • Install, maintain, and troubleshoot electrical distribution and protection circuits up to 480VAC., • Fabricate and install rigid and flexible conduit, and run power and control wiring based on electrical code requirements, • Properly select, install and wire 120V-480V motors, single phase to three phase based on needs, • Strong working knowledge of National Electrical Code (NFPA 70), • Evaluate current instrumentation technology for process equipment and make recommendations for improvements., • Ensure all work orders are completed, documented and closed out in the site CMMS system, as per procedure., • Provide on-call support during assigned weeks to ensure 24/7 coverage, • Provide practical solutions to operations/ controls problems., • Scope, estimate and execute small capital / maintenance projects along with maintenance manager/ project director/ operations, etc., • Train other employees considering their needs and company needs., • Oversee the work by contractors as required on site to ensure safe and quality performance.

Job DescriptionAHEAD builds platforms for digital business. By weaving together advances in cloud infrastructure, automation and analytics, and software delivery, we help enterprises deliver on the promise of digital transformation. At AHEAD, we prioritize creating a culture of belonging, where all perspectives and voices are represented, valued, respected, and heard. We create spaces to empower everyone to speak up, make change, and drive the culture at AHEAD. We are an equal opportunity employer, and do not discriminate based on an individual's race, national origin, color, gender, gender identity, gender expression, sexual orientation, religion, age, disability, marital status, or any other protected characteristic under applicable law, whether actual or perceived. We embrace all candidates that will contribute to the diversification and enrichment of ideas and perspectives at AHEAD. The AHEAD Security Specialty Solutions Engineer (SSE) will be focused on security technologies and solutions. The SSE is considered a subject matter expert in this area, with responsibility for selling and designing complex security solutions. The SSE is also considered an organizational thought leader for security within the company. You will work in partnership with sales representatives, practice leaders, and other SSE team members to build a market strategy and assist with account planning for existing and prospective clients. As part of this strategy, you will help sales representatives identify potential security technologies and vendors to partner with for individual clients or in a given region. You will assist with driving this strategy throughout a given campaign. In partnership with other senior and principal SSEs in your practice, you will assist with diagrams, bill of materials, proposal content, and other documentation associated with active security sales campaigns. You will also assist with achieving the proper training and certifications necessary to sell the security solutions we are positioning. Time management and prioritization are essential attributes to be successful. In this capacity, you will work to define security strategies, compare and contrast alternative approaches, and build key relationships, as well as size and configure security products. Positioning and leveraging subject matter experts and other AHEAD consultants is a necessity to scale your effectiveness within accounts. Roles and Responsibilities • Active participation in the AHEAD Security team and related virtual teams., • Be a thought leader within the Solutions Engineering organization, responsible for designing, architecting, and, at times, consulting for AHEAD clients in the security domain., • Build skills, relationships, and industry credibility across many segments to drive product, services, and consulting sales in the security space., • Support the sales teams during engagements by providing advice, solutions, or proposals optimized to meet customer technical and business requirements., • Develop relationships with other Security SSE team members, leaders, and partners in support of sales objectives., • Strategize and execute technical sales calls., • Complete required pre-sales documentation (configurations, pricing, services, presentations, justifications, etc.) quickly and accurately., • Qualify sales opportunities in terms of customer technical requirements, decision-making process, and funding., • Present and market the design and value of proposed AHEAD security solutions and business justifications to customers, prospects, and AHEAD management., • Participate in the mentorship of entry-level team members., • Possess strong, detailed product/technology/industry knowledge in the security domain., • Knowledge of job-associated software and applications. Qualifications, • Experience with any SASE vendor is a significant differentiator, • 3 – 5 years technical experience with security controls in one or more areas such as: Firewalls, IDS/IPS, NTA, NDR, NGAV, EDR, SIEM, Vulnerability Scanning, DLP, Penetration Testing, • Experience in architecture design that brings together and integrates solutions across multiple vendors, • 3 - 5 years acting as a consultant for clients, advising on technical solutions and participating in pre-sales and solution development., • Familiarwith Public Cloud providers: AWS, Azure, GCP, • Ability to grasp new technology concepts quickly and assist others in understanding them as well., • Ability to evaluate new technologies and provide internal training, • Ability to understand customer needs, define requirements, and design solutions, • Ability to develop and present architectural recommendations and implementation/ assessment services, • Expertise with Vendor Configuration Tools Preferred Skills, • Excellent written and verbal communication skills, • Excellent presentation skills, • Strong Technical Aptitude, • Provide technical leadership assuring quality, maximizing team output, • Self-motivated Preferred Certifications, • Industry: CISSP, CISA

Job Description SOKOL GxP Services is seeking a Scientist/Engineer to join our client site in Summit, New Jersey, supporting CAR-T manufacturing and Quality Control operations. This role is integral to driving robust investigation processes, ensuring timely resolution of deviations, and maintaining the highest standards of compliance and product integrity. Key responsibilities include: • Lead manufacturing and Quality Control investigation reports supporting CAR-T operations;, • Execute thorough root cause investigations, including interviewing personnel, hypothesis testing, and interpreting results;, • Author detailed investigation reports and identify corrective and preventive actions (CAPA), verifying their effectiveness;, • Troubleshoot complex problems and lead cross-functional investigation teams to ensure timely closure of reports;, • Conduct investigations (OOS, OOT, environmental monitoring, deviations) using root cause analysis tools;, • Perform GEMBA walks and propose CAPAs, developing comprehensive CAPA plans;, • Assess impact and risk, develop mitigation strategies, and initiate change control documentation;, • Coordinate impact assessments and provide technical support for investigations, CAPAs, and change controls;, • Support audit and inspection responses, including deviation defense, and train new team members;, • Author or review departmental procedures and support manufacturing and QC testing of CAR-T products as needed;, • Apply lean manufacturing and six sigma principles for continuous improvement;, • Bachelor’s degree in Science or Engineering;, • 3+ years of relevant experience in a regulated environment (e.g., GMP/cGMP);, • Experience conducting deviation investigations using root cause analysis tools;, • Experience managing CAPA processes, including defining corrective actions and verifying effectiveness;, • Hands-on experience using TrackWise and Veeva QMS;, • Experience working under global regulatory and cGMP requirements in a life sciences manufacturing or Quality Control context;, • Experience supporting health authority inspections (e.g., FDA) and responding to audit or inspection observations;, • Authorization to work in the United States.Preferred Qualifications:, • Experience initiating and managing change controls, including coordinating impact assessments;, • Experience working in a biopharmaceutical manufacturing facility; Work schedule: 100% on-site. Monday - Friday, regular business hours 6-month contract with possible extension Pay rate: $42.94 - $54.54/hr. Health benefits, holiday pay, and 401(k) program Employee referral bonus program Opportunity to contribute to high-impact projects with a leading biopharma company

Job DescriptionDescription: Azure Cloud Infrastructure Engineer Location Hybrid / Remote (US) Role Overview We are looking for a Cloud Infrastructure & DevOps Engineer to help build, operate, and continuously improve the cloud platforms supporting SaleDock and Celerant retail systems. This role is responsible for managing Azure infrastructure, improving reliability, and developing automation that streamlines provisioning and deployment processes for new ecommerce customers. You will work closely with development and support teams to ensure our production and test environments are secure, scalable, and operationally efficient. Key Responsibilities Cloud Infrastructure & Operations • Build, manage, and maintain Azure cloud infrastructure supporting ecommerce and retail operations., • Administer production and test environments across Linux (and Windows where required)., • Monitor performance, capacity, uptime, and resource consumption across hosted applications., • Create and maintain dashboards and monitoring views to proactively identify issues., • Develop and maintain automation for provisioning, configuration, testing, and deployment., • Maintain CI/CD pipelines for ecommerce environments, including creating pipelines for new customer sites., • Improve and automate manual go-live processes for onboarding new ecommerce customers, including:, • Provisioning web applications, • Configuring custom domains and SSL validation, • Develop internal tooling that enables support teams to monitor, restart, and manage endpoints/services., • Assist with incident response, troubleshooting, and root cause analysis., • Apply operational security best practices across the Azure environment., • Implement hardening, access controls, patching processes, and secure networking., • Ensure infrastructure is compliant with internal standards and industry best practice. Required Skills & Experience • Strong experience managing cloud infrastructure in Microsoft Azure., • Experience with Infrastructure as Code (Terraform, Bicep, ARM, etc.)., • Strong CI/CD pipeline experience (Azure DevOps, GitHub Actions, etc.)., • Experience supporting production workloads and diagnosing performance issues., • Solid understanding of networking concepts (VNets, subnets, routing, firewalls, DNS)., • Comfortable working with Linux administration (and Windows Server where relevant)., • Scripting / automation skills (PowerShell, Bash, Python, etc.)., • Familiarity with monitoring tools (Azure Monitor, Application Insights, Grafana, etc.). Nice to Have • Experience running multi-tenant ecommerce or SaaS platforms., • Experience with scaling strategies, load balancing, and resilience planning., • Understanding of security frameworks and governance in Azure (Defender, Policy, RBAC best practices)., • Experience building internal support tooling or operational dashboards. What Success Looks Like • Production and Test infrastructure with high uptime, security, and incident handling, • Faster and more automated ecommerce customer go-live processes., • Improved monitoring and visualization tooling, • Improved reliability and visibility of production systems., • Clear monitoring dashboards and proactive alerting in place.Requirements: Required Skills & Experience • Strong experience managing cloud infrastructure in Microsoft Azure., • Experience with Infrastructure as Code (Terraform, Bicep, ARM, etc.)., • Strong CI/CD pipeline experience (Azure DevOps, GitHub Actions, etc.)., • Experience supporting production workloads and diagnosing performance issues., • Solid understanding of networking concepts (VNets, subnets, routing, firewalls, DNS)., • Comfortable working with Linux administration (and Windows Server where relevant)., • Scripting / automation skills (PowerShell, Bash, Python, etc.)., • Familiarity with monitoring tools (Azure Monitor, Application Insights, Grafana, etc.).

Job Description Position Summary: The Product Quality Team is a technical quality engineering team responsible for monitoring, understanding, and improving product performance, in addition to owning quality processes within the service organization. The Product Quality Engineer will be technical, hands-on, and customer-focused with an ability to analyze, diagnose and test product quality issues. The successful candidate is accountable, collaborative, has excellent communication and problem-solving skills, and is passionate about delivering world-class products that make healthcare more accessible, simpler, and safer. Major Responsibilities: • Conduct hands-on analyses of returned products to identify root causes of failures, • Develop investigation criteria and test methods to properly diagnose and root cause field failures, • Analyze and trend on product performance data to provide recommendations for product improvements, • Perform Quality trending of Service data and conduct investigations to identify causes of Servicing and Service-related complaint trends, including issues in Servicing workmanship and Out of Box failures., • Review the output of Servicing and related Complaint or Non-Conformance Investigation activities to ensure that the resulting work complies with all regulatory and service requirements, as well as facility, divisional, and corporate objectives for defect prevention and continuous improvement., • Audit and review Complaint Investigations and records of Servicing activities to ensure they are thorough, accurate, self-explanatory, and completed in a timely manner into the complaint handling system., • Analyze service-related PFMEAs and other activities to support pre-market and post-market risk management activities, • Provide ongoing training to Service staff on regulatory requirements associated with complaint investigations and Servicing records, • Foster supplier relationships and support Supplier corrective action requests, • Support Product Transfer teams by aligning quality requirements and processes for new or transferred products, • Plan, develop, and conduct Service Manual and Service work instruction validations (IQ, OQ, PQ), test method validations, and inspection method validations, • Participate in the development and review of engineering change orders that impact servicing activities, • Work with Engineering to design and implement tooling and fixturing required to perform servicing activities and implement error-proofing (Poke-Yoke) in those stations, • Work cross-functionally to support implementation of changes in servicing and inspection procedures to mitigate field failures., • Support CAPAs, Escalations, DCNs, and other engineering projects to address and resolve field quality issues, ensuring timely implementation and compliance with quality standards, • Perform DHR, Service History record, and PFMEA reviews in support of complaint investigations, • Adhere to the letter and spirit of the company's Code of Conduct and all other company policies., • While the above key responsibilities are the main elements of the titled job the Vice President Quality may at times request other tasks deemed to be within their capabilities. Skills and Experience: • Excellent technical report writing skills, • Strong Root Cause Analysis, Design of Experiments, and test method development experience as related to Service activities and complaint or non-conformance investigations, • Experience in leading investigations and trending analysis, leveraging expertise in troubleshooting electro-mechanical systems and engineering custom test fixtures and apparatuses for functional and performance validation, • Ability to manage multiple investigations and projects independently., • A solid understanding of the FDA QSR Quality System Requirements, and the ability to apply the knowledge to comply with goals and objectives., • Strong experience with MS Office Products (Word, Excel, Visio, Project, PowerPoint, Outlook, etc.), • Strong experience with statistical analysis of data., • Experience with Minitab preferred., • Experience with Six Sigma principles preferred., • Excellent oral and written communication skills with the ability to communicate with audiences of varying technical skills, • A strong ability to prepare written technical plans and reports in support of engineering changes, product or process validations, and failure investigations., • Strong focus on meeting customer needs., • Ability to work with cross-functional teams., • Ability to be self-driven and solve complex problems independently., • Demonstrated strong attention to detail and “do it right the first time” attitude Qualifications: • Bachelor's degree in an Engineering discipline (Electrical, Mechanical, Bio-Medical, etc.) or the equivalent work experience, • 3-7 years of related hands-on engineering experience in the medical device industry, or equivalent., • Ability to travel 10-20%, • Strong background in troubleshooting electro-mechanical systems and interpreting electrical schematics and circuit diagrams, • Experience using diagnostic tools such as digital multimeters and oscilloscopes, as well as developing and validating test methods for components including PCBs, motors, pumps, power supplies, and batteries, • Prior experience in implementing new processes and driving improvements., • Experience in a customer focused Service organization is a plus, • Familiarity with ISO14971 and associated Risk Management Processes is a plus, • Knowledge of and/or experience with product decontamination and Blood Borne Pathogen exposure controls is a plus, • Experience in an FDA regulated environment is a plus

Collaborates with the engineering of projects in accordance with engineering best practices, company standards, and in compliance with any and all applicable codes. Professional Mechanical Engineering (PE) license. Technical Services Engineer (TSE) I.

Consultants for Materials, Engineering Mechanics, Instruments & Process Controls, Electrical and Energy), plant and business personnel, and suppliers and contractors to improve process reliability, quality, and safety. Train peers on relevant operational engineering topics. The Process Engineer will

As an Advanced Security Engineer focused on Endpoint Security, you will design, build, and operate security controls that protect Relativity's employee endpoints and the enterprise systems they access.

The Senior Automation Controls Engineer is an experienced individual contributor responsible for the design, development, implementation, and support of PLC‑based automation and machine vision systems used in high‑volume manufacturing. This position reports to the Manager – Automation and Cont

Job DescriptionDescriptionA great place to work and grow, Naik Group is a dynamic, multi-discipline engineering company with offices in New York and New Jersey. Our continued growth in this highly competitive market is evidence of the trust and value clients place in our services’ quality and timeliness. Included in the full range of professional services we offer are Bridge/ Structural Design & Inspection, Highway/Roadway Engineering, Civil/Site Engineering, Traffic Engineering/ITS, Utility Engineering, Construction Management & Inspection, Design Build, Survey, Right of Way, and High Definition 3-D Laser Scanning. Our principals take considerable pride in their approach to the firm’s management, offering services like that of a large organization while demonstrating the personal client and consultant relationship of a small firm. Naik Consulting Group is currently seeking a Senior Construction Manager with proven experience and expertise in Bridge/Rail projects. The Senior Construction Manager will oversee a multidisciplinary team and lead the project through preconstruction to commissioning for a multi-million dollar bridge repair project. Responsibilities • Lead overall construction planning, scheduling, and execution for major bridge and rail projects., • Apply expert level of knowledge of construction means and methods, materials and techniques for bridge repair., • Manage field operations, subcontractors, and project engineering staff to ensure work is completed safely, on time, and within budget., • Oversee coordination with rail agencies, transportation authorities, utility providers, and other stakeholders., • Review design documents, shop drawings, and technical specifications to ensure compliance and constructability., • Implement and enforce safety programs, quality control procedures, and risk-management strategies., • Ensures adherence to contract terms, performance, quality assurance, compliance requirements, and engineering specifications., • Prepare progress reports, cost forecasts, and change-order documentation., • Serve as the primary on-site project leader, maintaining strong communication with clients, consultants, and internal teams., • Establishes work plan and multidisciplinary staffing of the project and arranges for assignment of project personnel., • Mentor junior staff and contribute to long-term workforce development. Qualifications • Bachelor’s degree in Construction Management, Civil Engineering, or related field (Master’s preferred)., • Active New Jersey Professional Engineer (PE) License is required., • 20+ years of construction project management experience with expert level knowledge of bridge and/or rail projects., • Minimum of 7+ years in a supervisory role, • Management of at least three (3) bridge construction or rehabilitation projects and one (1) completed project involving railroad infrastructure within an active railroad environment., • Strong understanding of track work, rail operations, bridge structures, and applicable codes and standards., • Proven track record of delivering multi-million-dollar transportation projects., • Expertise in project scheduling software (e.g., Primavera P6), document controls, and cost management tools., • Exceptional leadership, communication, and problem-solving skills., • Ability to work in a fast-paced environment and manage multiple priorities. BenefitsNaik offers a competitive compensation package including: • Generous sign-on bonus, • Holiday and paid-time-off programs, • 401(k) Plan and Match, • Career Path Development Program (Management & Technical Career Tracks), • Tuition Reimbursement, • Competitive health and dental insurance premiums, • Short-Term Disability/Long-Term Disability, • Life insurance, • Employee Assistant Program (EAP), • Flexible Spending Account, • and MoreNaik is a Drug and Alcohol-Free workplace, an Equal Employment Opportunity employer and E-Verify employer. We are committed to pay transparency and fairness in hiring. This posting complies with the Pay and Benefit Transparency Laws, which requires employers to disclose compensation and benefits information in all job advertisements.