Controls engineer jobs in Seattle, WashingtonCreate job alerts

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. At Boeing, we are all innovators on a mission to connect, protect, explore and inspire. From the seabed to outer space, you’ll learn and grow, contributing to work that shapes the world. Find your future with us! Boeing Test and Evaluation (BT&E) is seeking a Instrumentation Technician C to join our teams in either Tukwila, WA or Seattle, WA. In this role, you will work with blueprints, schematics, technical manuals and bulletins, National Bureau of Standards, manufacturers’ specifications, oral and written instructions. You will be installing instrumentation, primarily strain gauges and thermocouples on all models of Boeing aircraft civilian, military and space. Position Responsibilities: * Receive work assignment from team leader or supervisor and obtain necessary materials and equipment * Obtain appropriate engineering drawings and test documents, as required, for assignment if drawings, sketches, and documents are not with work assignment * Fabricate wire or fiber optic bundles used to connect various types of test and computer equipment together or test sensing equipment used to monitor and measure, for the purpose of collecting and storing data during test * Set up and perform qualification test, bench test, or automatic test as required per work assignment, test document, test equipment manuals, and/or engineering instructions * Install fiber optic strain gages, thermocouples, accelerometers, and strain gages by soldering, bonding, spot welding, or using mechanical fastening devices * Use a scissor or boom lift to access areas for instrumentation installation this work is performed both inside hangars and outside on airfields * Perform modification of test equipment to meet engineering configuration, as required * Select proper hand, power, and/or bench tools needed to perform required operation, such as screwdrivers, pliers, torque wrenches, crimpers, cable tools, band saw, drill press, and sander, as required * Use shop tools and any test equipment required to complete work assignment * Write tie-ins, and maintain records such as work log for areas/equipment as required * Devise and/or build shop aids and work around methods as necessary to test/troubleshoot systems * Handle and protect components and assemblies such as static sensitive equipment in accordance with shop procedures and drawing requirements * Handle and dispose of hazardous materials (ketone, naphtha, alcohol, epoxy, acids) in approved manner (in accordance with Safety Data Sheets) using personal protective equipment as required * Pack electronic equipment for travel as required per drawing and Boeing applicable specifications * Check work after completion of each operation to be sure job is per drawing or other instructions * Put completed job or reworked job up for inspection as required * Contact team leader/supervisor/engineer/planner when assistance is needed (e.g. if there is questions about drawings or paperwork, if drawings and paperwork do not match, or when any other problem arises) * Maintain personal and tool certifications, as required * Comply with applicable tool control policies * Effectively accomplishing the tasks, duties and responsibilities of this job requires at least these attributes * Ability to use precision measuring tools and test equipment and interpret results * Knowledge of routing, clamping, tying, connecting and terminating wires and/or wire bundles in electrical systems and assemblies, per the appropriate electrical codes * Knowledge of aircraft electrical and mechanical systems * Ability to calculate and apply advanced mathematics * Know and interpret data from a coordinate system to identify multiple axis and dimensional references (3-D) * Ability to set up and operate floor mounted hydraulic and/or mechanical operated equipment * Ability to demonstrate entry level competency in operation of PIT (Power Industrial Trucks), in a safe manner as required * Ability to safely operate various types of hand tools and/or hand-held power tools as required * Effectively communicate information * Knowledge of basic electricity and electrical systems * Operate various types of test equipment, perform testing and interpret results, as required * Knowledge of proper use, handling, and disposal of hazardous materials/chemicals, oils, coolants, and lubricants per government regulations and Boeing procedures * Travel up to 10% of the time, both domestically and internationally. The following Physical Demands may be requirements of this job: Frequent (3-6 Hrs.) * Carrying less than 10 pounds; Climbing/balancing (stairs, ladders, poles, scaffold); Finger manipulation (keyboarding, other); Flexion/Extension (head bent down, head bent back); Handling (holding, grasping); Lifting less than 10 pounds; Reaching (overhead); Rotation of head/neck; Sitting; Standing; Walking Occasional (1-3 Hrs.) * Bending at the waist; Carrying 10-35 pounds; Twisting at the waist; Use of low impact vibratory tools (drilling/sanding); Lying down (back, side, front); Operating of foot controls; Pushing/pulling 10-35 pounds; Pushing/pulling less than 10 pounds; Kneeling; Lifting 10-35 pounds; Crawling; Crouching (squatting) The following Chemicals/Materials may be requirements of this job: Frequent (3-6 Hrs.) * Metals (aluminum, brass, iron, Monel, nickel, steel); Plastics (acrylic, fiberglass, graphite, resins); Sealants (latex, polysulfide, silicon); Solvents (acetone, turpentine, MEK, MPK, Isopropho); Adhesives (epoxy, acrylonitrile, organic rubber) Occasional (1-3 Hrs.) * Alkalis (acid neutralizers, strong detergents); Liquid Coatings (etching mask, lacquer, penetrant d); Acids (boric, muriatic, nitric, hydrochloric) The following Environmental Conditions may be requirements of this job: Continuous (6-8 Hrs.) * Noise (constant or intermittent sounds or pitch) Frequent (3-6 Hrs.) * Nonionizing Radiation (sub-radio frequency, radio); Elevated Platforms (wings, lifts, cranes, ladders); Extreme Heat (ovens and furnaces) Occasional (1-3 Hrs.) * Atmospheric Conditions (fumes, noxious odors, dust); Confined Spaces; Welding Equipment (Arc/Cutting, Flux-Cored, Gas-Me) The following Personal Protective Equipment may be requirements of this job: Continuous (6-8 Hrs.) * Face/Eye Protection (safety glasses, goggles); Fall Protection (safety belts, harnesses, lifeline); Protective Footwear (steel-toed shoes, rubber boot) Frequent (3-6 Hrs.) * Protective Headwear (welding helmets, hard hats); Hand/Arm Protection (gloves, arm protectors); Hearing Protection (ear inserts, canal caps, earmuff) This position is expected to be 100% onsite. The selected candidate will be required to work onsite at the listed location. This position must meet export control compliance requirements. To meet export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.15 is required. “U.S. Person” includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Basic Qualifications (Required Skills/Experience): * 1+ year of experience reading and interpreting wire harness diagrams and installation schematics * 1+ year of experience in electrical (wire shop) fabrication and required processes Preferred Qualifications (Desired Skills/Experience): * 3+ years of strain gaging experience * 3+ years of experience in Aircraft Electrical systems * Certification(s) in: Electrical (Crimping, Bond and Ground); Mechanical (Fork lift, Hand truck, Pressure/vacuum); or Safety (Electrical, Egress, Explosives) Shift: This position is for 1st shift or 2nd shift. This position may require travel up to 10% of the time, both domestically and internationally. Union: This is an hourly position governed by the International Association of Machinist (IAM-751) Collective Bargaining agreement. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will be considered as this job is not installed in QTTP. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range: $27.32/hour - $57.88/hour Applications for this position will be accepted until Oct. 17, 2025 Export Control Requirements: This position must meet export control compliance requirements. To meet export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.15 is required. “U.S. Person” includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Additional InformationOvernight Job Number25160826 Job CategoryEngineering & Facilities LocationSheraton Grand Seattle, 1400 6th Ave, Seattle, Washington, United States, 98101___ ScheduleFull Time Located Remotely?N Position Type Non-Management Pay Range: $33.64-$35.64 per hour POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display proficiency in any one of the following categories, above average skills in two more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Display basic ability to repair or replace PVC copper pipe (including soldering). Troubleshoot and perform basic repair on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related duties. Assist with surface preparation and painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Use the Lockout/Tagout system before performing any maintenance work. Display working knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform mid-level troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers (e.g., Engineer I). Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Experience in general maintenance, exterior and interior surface preparation, and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver’s License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. All positions offer a 401(k) plan, stock purchase plan, discounts at Marriott properties, commuter benefits, employee assistance plan, and childcare discounts. Benefits are subject to terms and conditions, which may include rules regarding eligibility, enrollment, waiting period, contribution, benefit limits, election changes, benefit exclusions, and others. Click ___ to learn more. Full-time positions also offer coverage for medical, dental, vision, health care flexible spending account, dependent care flexible spending account, life insurance, disability insurance, accident insurance, adoption expense reimbursements, paid parental leave and educational assistance. Washington Applicants Only: Employees will accrue paid sick leave, 0.04359 PTO balance for every hour worked and be eligible to receive a minimum of 7 holidays annually. When you join the Sheraton family, you become a member of its global community. We’ve been a place to gather and connect since 1937. At Sheraton, associates create a sense of belonging in more than 400 communities around the world. We invite, we welcome, and we connect guests through engaging experiences and thoughtful service. If you’re a team player who is excited to deliver a meaningful guest experience, we encourage you to explore your next career opportunity with Sheraton. Join us on our mission to be ‘The World’s Gathering Place’. In joining Sheraton Hotels & Resorts, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.

Additional InformationOvernight Job Number25160826 Job CategoryEngineering & Facilities LocationSheraton Grand Seattle, 1400 6th Ave, Seattle, Washington, United States, 98101___ ScheduleFull Time Located Remotely?N Position Type Non-Management Pay Range: $33.64-$35.64 per hour POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display proficiency in any one of the following categories, above average skills in two more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Display basic ability to repair or replace PVC copper pipe (including soldering). Troubleshoot and perform basic repair on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related duties. Assist with surface preparation and painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Use the Lockout/Tagout system before performing any maintenance work. Display working knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform mid-level troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers (e.g., Engineer I). Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Experience in general maintenance, exterior and interior surface preparation, and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver’s License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. All positions offer a 401(k) plan, stock purchase plan, discounts at Marriott properties, commuter benefits, employee assistance plan, and childcare discounts. Benefits are subject to terms and conditions, which may include rules regarding eligibility, enrollment, waiting period, contribution, benefit limits, election changes, benefit exclusions, and others. Click ___ to learn more. Full-time positions also offer coverage for medical, dental, vision, health care flexible spending account, dependent care flexible spending account, life insurance, disability insurance, accident insurance, adoption expense reimbursements, paid parental leave and educational assistance. Washington Applicants Only: Employees will accrue paid sick leave, 0.04359 PTO balance for every hour worked and be eligible to receive a minimum of 7 holidays annually. When you join the Sheraton family, you become a member of its global community. We’ve been a place to gather and connect since 1937. At Sheraton, associates create a sense of belonging in more than 400 communities around the world. We invite, we welcome, and we connect guests through engaging experiences and thoughtful service. If you’re a team player who is excited to deliver a meaningful guest experience, we encourage you to explore your next career opportunity with Sheraton. Join us on our mission to be ‘The World’s Gathering Place’. In joining Sheraton Hotels & Resorts, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.

Additional InformationOvernight Job Number25160826 Job CategoryEngineering & Facilities LocationSheraton Grand Seattle, 1400 6th Ave, Seattle, Washington, United States, 98101___ ScheduleFull Time Located Remotely?N Position Type Non-Management Pay Range: $33.64-$35.64 per hour POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display proficiency in any one of the following categories, above average skills in two more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Display basic ability to repair or replace PVC copper pipe (including soldering). Troubleshoot and perform basic repair on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related duties. Assist with surface preparation and painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Use the Lockout/Tagout system before performing any maintenance work. Display working knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform mid-level troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers (e.g., Engineer I). Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Experience in general maintenance, exterior and interior surface preparation, and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver’s License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. All positions offer a 401(k) plan, stock purchase plan, discounts at Marriott properties, commuter benefits, employee assistance plan, and childcare discounts. Benefits are subject to terms and conditions, which may include rules regarding eligibility, enrollment, waiting period, contribution, benefit limits, election changes, benefit exclusions, and others. Click ___ to learn more. Full-time positions also offer coverage for medical, dental, vision, health care flexible spending account, dependent care flexible spending account, life insurance, disability insurance, accident insurance, adoption expense reimbursements, paid parental leave and educational assistance. Washington Applicants Only: Employees will accrue paid sick leave, 0.04359 PTO balance for every hour worked and be eligible to receive a minimum of 7 holidays annually. When you join the Sheraton family, you become a member of its global community. We’ve been a place to gather and connect since 1937. At Sheraton, associates create a sense of belonging in more than 400 communities around the world. We invite, we welcome, and we connect guests through engaging experiences and thoughtful service. If you’re a team player who is excited to deliver a meaningful guest experience, we encourage you to explore your next career opportunity with Sheraton. Join us on our mission to be ‘The World’s Gathering Place’. In joining Sheraton Hotels & Resorts, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.

Additional InformationOvernight Job Number25160826 Job CategoryEngineering & Facilities LocationSheraton Grand Seattle, 1400 6th Ave, Seattle, Washington, United States, 98101___ ScheduleFull Time Located Remotely?N Position Type Non-Management Pay Range: $33.64-$35.64 per hour POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display proficiency in any one of the following categories, above average skills in two more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Display basic ability to repair or replace PVC copper pipe (including soldering). Troubleshoot and perform basic repair on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related duties. Assist with surface preparation and painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Use the Lockout/Tagout system before performing any maintenance work. Display working knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform mid-level troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers (e.g., Engineer I). Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Experience in general maintenance, exterior and interior surface preparation, and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver’s License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. All positions offer a 401(k) plan, stock purchase plan, discounts at Marriott properties, commuter benefits, employee assistance plan, and childcare discounts. Benefits are subject to terms and conditions, which may include rules regarding eligibility, enrollment, waiting period, contribution, benefit limits, election changes, benefit exclusions, and others. Click ___ to learn more. Full-time positions also offer coverage for medical, dental, vision, health care flexible spending account, dependent care flexible spending account, life insurance, disability insurance, accident insurance, adoption expense reimbursements, paid parental leave and educational assistance. Washington Applicants Only: Employees will accrue paid sick leave, 0.04359 PTO balance for every hour worked and be eligible to receive a minimum of 7 holidays annually. When you join the Sheraton family, you become a member of its global community. We’ve been a place to gather and connect since 1937. At Sheraton, associates create a sense of belonging in more than 400 communities around the world. We invite, we welcome, and we connect guests through engaging experiences and thoughtful service. If you’re a team player who is excited to deliver a meaningful guest experience, we encourage you to explore your next career opportunity with Sheraton. Join us on our mission to be ‘The World’s Gathering Place’. In joining Sheraton Hotels & Resorts, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.

Description: ___When you think of manufacturing wood products, do you think of technology and innovation? Our highly automated, state-of-the-art mills require top-level engineering and industrial applications to keep operations running smoothly while maintaining safety at the forefront of everything we do. We believe trees are a remarkable resource that can, and should, be managed responsibly to make a range of products that meet human needs, while also providing recreation, wildlife habitat, and other important ecosystem benefits. For more than a century, we’ve been building our reputation as a leader in sustainable wood products. In this role, you will work collaboratively with our team of talented engineers and mill leadership to improve Weyerhaeuser’s wood product manufacturing and Timberlands operations and provide engineering safety support for various new development efforts. The Safety Engineer is a corporate level position; meeting needs across the company’s 34 Wood Products manufacturing and Timberlands facilities in the US and Canada. Work location is flexible, open for discussion and will likely be a hybrid model blending in-office, remote, and travel. This role is a fully remote work-from-home position, provided you are currently based (or are planning to move to) one of the following states: Alabama, Arkansas, Arizona, California, Florida, Georgia, Idaho, Louisiana, Maine, Michigan, Mississippi, North Carolina, Oklahoma, Oregon, Pennsylvania, South Carolina, Texas, Utah, Virginia, Washington, Montana, West Virginia. This position works closely with the company Safety and Engineering functions and business operations to eliminate Serious Injuries and Fatalities and ensure regulatory compliance. The Safety Engineer will reduce injury risk through engineering design and controls while maximizing human and process performance. This position resides in the Engineering department with a dotted line to corporate Health and Safety. The safety engineer is responsible to: • Contribute to building a safety culture that enables our technical engineering and operational functions to develop safe and compliant processes, systems and solutions to reduce risk and eliminate injuries focusing on engineering controls., • Collaborate with internal and external stakeholders to identify engineering solutions to eliminate or reduce risk., • Apply knowledge of regulatory safety requirements and safety consensus standards in the US and Canada related to machine and equipment safety including fall protection and forestry operations. b. Machine guarding c. Controlling hazardous energy on machinery, robotics and automated systems d. Reviewing and approving acquisition of, and modifications to equipment e. Support safety-in-design related to production, fire prevention and life safety, combustible dust, electrical safety, ergonomics, forestry, industrial hygiene and environmental initiatives • Develop, implement, and maintain a prevention through design (PtD) company standard, • Work with capital project and engineering managers to provide design review and input on the front end of large projects. Assist with criteria for contractor construction safety requirements and controls., • Apply engineering design to produce solutions that meet specified safety and related operational needs including internally designed and fabricated equipment to meet standards, or source third-party resources as needed., • Serve as a company fall protection Competent Person, • Serve as the company automation safety and robotics safety subject matter expert., • Coordinate activities and advise the Wood Products Energy Safety Team, the Wood Products Electrical Safety Team and Innovation special projects., • Develop next-generation manufacturing concepts and technology roadmap, including new technology benchmarking, evaluation, and deployment to align with company safety strategy & initiatives., • Identify, formulate, and solve complex safety-related engineering problems by applying engineering, science, and mathematical principles., • Communicate effectively with a range of audiences, both orally and in writing., • Develop and use collaborative relationships to facilitate the accomplishment of work goals., • Organize, manage, and track multiple detailed tasks and assignments with frequently changing priorities in a fast-paced work environment., • Develop and implement rigorous quality assurance protocols and testing procedures to ensure the reliability and effectiveness of safety around future automation equipment, conducting risk assessments, failure mode analyses, and validation tests., • Demonstrate a high level of understanding and application ability of both basic and advanced safety process control concepts and technologies., • Advise operations on consultants for safety engineering projects., • Review specifications, technical documentation, and design changes for impacts to safety systems using advanced risk assessment techniques., • Develop and implement rigorous quality assurance protocols and validation procedures to ensure the reliability and effectiveness of engineered safety systems by conducting risk assessments, failure mode analyses, and validation tests. Qualifications:, • Degree in a related engineering discipline (safety, mechanical, industrial, civil/structural) engineer degree preferred with, • Professional Engineer status (required) plus Certified Safety Professional (CSP) certification (ideal at hire or must strive to obtain within 2 years)., • Minimum of 5 years’ industrial experience, preferably in manufacturing. Compensation: This role is eligible for our annual merit-increase program, and we are targeting a salary range of $114,466 to $171,836 based on your level of skills, qualifications, and experience. You will also be eligible for our Annual Incentive Program, which offers a cash bonus targeting 20% of base pay. Potential plan funding may range from zero to two times that target. Benefits: When you join our team, you and your family will be covered by our comprehensive health benefits plan, which includes medical, dental, vision, and basic life insurance. We also support personal volunteerism, sponsor a host of diversity networks, promote mentoring, and provide training and development opportunities to help you chart your path to a fulfilling career. Retirement: Employees can enroll in our company’s 401k plan, which includes a paid company match in addition to our annual contribution equal to 5% of your base salary. Paid Time Off or Vacation: We provide eligible employees who are scheduled to work 25 hours or more per week with paid vacation for up to 3 weeks to use during your first year of employment. In addition, after being employed for six months, eligible employees begin to accrue vacation for future use. We also recognize eleven paid holidays per year, providing a total of 88 hours along with paid parental leave for all full-time employees. About Weyerhaeuser: We sustainably manage forests and manufacture products that make the world a better place. We’re serious about safety, driven to achieve excellence, and proud of what we do. With multiple business lines in locations across North America, we offer a range of exciting career opportunities for smart, talented people who are passionate about making a difference. We know you have a choice in your career. We want you to choose us. About Wood Products: We’ve been delivering quality building products and solutions to our customers for more than 100 years. From builders and dealers to specifiers and homeowners, we offer exceptional product performance and unparalleled support. For more than a century, we’ve been building our reputation as a leader in sustainable wood products. Weyerhaeuser is an equal opportunity employer. Inclusion is one of our five core values and we strive to maintain a culture where all our people feel a sense of belonging, opportunity and shared purpose. We are committed to recruiting a diverse workforce and supporting an equitable and inclusive environment that inspires people of all backgrounds to join, stay and thrive with our team.

Job Description The Maintenance Technician ensures the integrity of building systems by performing routine maintenance and minor repairs while supporting the efficient operation of equipment. This role provides hands-on support for general maintenance tasks under the supervision of the Chief Engineer or Assistant Chief Engineer. Essential Duties and Responsibilities: • Perform repairs in restroom facilities, including toilets and soap dispensers; clear drains using plungers and handheld augers., • Conduct general labor tasks, such as carrying, stacking, and sorting materials; debris removal., • Safely use employer-provided vehicles to travel for parts and supplies, adhering to all traffic laws., • Maintain and/or replace door hardware; handle minor furniture repairs and floor maintenance; and conduct basic painting tasks in equipment rooms; and perform general cleaning in mechanical spaces., • Perform maintenance tasks as assigned; conduct cleaning and inspections of engineering areas, mechanical spaces, and equipment., • Replace lamps, air filters, ceiling tiles, and fire extinguishers., • Follow safety protocols and use PPE for all tasks; ensure compliance with OSHA, NEC, NFC, NFPA regulations at all properties; promote safe working environments by reporting hazards; participate in safety audits., • Communicate verbally and in writing with teammates, leadership team, vendors, tenants, and client employees in a professional manner, keeping the appropriate customer(s) informed/updated as needed., • Interact with tenants, engineers, and contractors while carrying out maintenance tasks., • Follow safety protocols and use PPE for all tasks; ensure compliance with OSHA, NEC, NFC, NFPA regulations at all properties; promote safe working environments by reporting hazards and participating in safety audits., • HS Diploma or GED required, • Technical or vocational training, and/or 1-2 years of on-the-job training in one or more of the following areas: HVAC, electrical, mechanical, process controls, or plumbing, • Basic working knowledge of laptop and phone applications for work order and facility operation systems as well as basic skills with Microsoft Outlook, • Possess engineering and trade licenses required according to local, state, or national requirements, • Familiar with fire/life safety equipment/procedures, • Proven track record of delivering excellent internal and external customer service; ability to successfully interact/communicate with tenants/vendors/contractors as well as teammates and leadership team, • Familiarity with blueprints and code requirements, • Ability to work after hours, weekends, holidays, and during emergency situations as necessary to meet the needs of the client, • Possess competent knowledge of use and care of tools, • Ability to read and write English in order to understand manuals and procedures, and write reports. Ability to stand, walk, climb ladders, and lift up to 50 pounds; perform physically demanding tasks such as stooping, crouching, and kneeling. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position is 100% in-office. The role requires working in office during standard business hours. Remote work or telecommuting is not an option for this position. #IND123 Pay Range$28—$28 USD About Lincoln Property Company Lincoln Property Company ("Lincoln") is one of the largest private real estate firms in the United States. Offering a fully integrated platform of real estate services and innovative solutions to owners, investors, lenders and occupiers, Lincoln supports the entire real estate lifecycle across asset types, including office, multifamily, life science, retail, industrial, data center, production studio, healthcare, government, universities, and mixed-use properties, throughout the United States, United Kingdom, and Europe. Lincoln's combined management and leasing portfolio on behalf of institutional clients includes more than 680 million square feet of commercial space. For more information, visit: . All job offers are contingent on completion of a background check and proof of eligibility to work in the United States. By submitting your information or resume in response to this opportunity, you acknowledge that your personal information will be handled in accordance with Lincoln Property Company's privacy policy. Lincoln Property Company does not accept unsolicited resumes from third-party recruiters unless they were contractually engaged by Lincoln Property Company to provide candidates for a specified opening. Any such employment agency, person or entity that submits an unsolicited resume does so with the acknowledgement and agreement that Lincoln Property Company will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. At this time, we are not working with any agencies. Company DescriptionAbout Lincoln Property Company Lincoln Property Company (“Lincoln”) is one of the largest private real estate firms in the United States. Offering a fully integrated platform of real estate services and innovative solutions to owners, investors, lenders and occupiers, Lincoln supports the entire real estate lifecycle across asset types, including office, life science, retail, industrial, data center, production studio, healthcare, government, universities, and mixed-used properties, throughout the United States, United Kingdom, and Europe. Lincoln’s combined management and leasing portfolio on behalf of institutional clients includes more than 510 million square feet of commercial space. In addition to providing third-party real estate services, Lincoln has completed over 150 million square feet of development since its inception in 1965 and has another $20 billion currently under construction or in the pipeline. For more information, visit: Lincoln Property Company\r\n Lincoln Property Company (“Lincoln”) is one of the largest private real estate firms in the United States. Offering a fully integrated platform of real estate services and innovative solutions to owners, investors, lenders and occupiers, Lincoln supports the entire real estate lifecycle across asset types, including office, life science, retail, industrial, data center, production studio, healthcare, government, universities, and mixed-used properties, throughout the United States, United Kingdom, and Europe. Lincoln’s combined management and leasing portfolio on behalf of institutional clients includes more than 510 million square feet of commercial space. In addition to providing third-party real estate services, Lincoln has completed over 150 million square feet of development since its inception in 1965 and has another $20 billion currently under construction or in the pipeline. For more information, visit: .

Job Description The Carbon Robotics LaserWeeder™ leverages advanced robotics, computer vision, AI/deep learning, and lasers to eliminate weeds with sub-millimeter accuracy—all without herbicides. This innovative solution reduces environmental impact, promotes soil health, and helps farmers address labor shortages and rising costs. Designed in Seattle and built at our cutting-edge manufacturing facility in Richland, Washington, the LaserWeeder is setting a new standard for automated weed control. With $157 million in funding from prominent investors such as BOND, NVentures (NVIDIA's venture arm), Anthos Capital, Fuse Venture Capital, Ignition Partners, Revolution, Sozo Ventures, and Voyager Capital, Carbon Robotics is driving innovation. As a no-nonsense team with a bias for action, we take pride in executing our ideas. Whether it's designing transformative technology or visiting farms to ensure our products are reliable and safe, we do whatever it takes to deliver for our customers. Working here means tackling big problems with big impact. You'll find opportunities to grow professionally, solve complex challenges, and make meaningful contributions to a mission that matters. At Carbon Robotics, we trust our team to act independently and make practical, real-world decisions. Join us as we innovate, execute, and build the future of farming together. YouTube | X | Instagram | LinkedIn | News As a Sr. Electrical Engineer, Electric Motor Controls at Carbon Robotics, you will lead the design of high-power motor control systems for our diesel-electric platform. You'll architect traction motor drives, and optimize power management between the diesel generator and electric drive motors. From developing robust control algorithms to field testing on working farms, you'll do whatever it takes - which might include going to the farm - to ensure our customers have reliable and safe products. What you'll do: • Collaborate with our Mechanical Powertrain engineers to define and select core off the shelf and semi-custom components including diesel engine, generator, ECUs, start/standby batteries, and more for our upcoming projects., • Design high-power motor control systems for traction drives, linear actuation, and other industrial motion needs., • Develop control strategies for power management between diesel generator and multiple motor loads, • Design/integrate inverters and motor controllers capable of handling 100+ kW traction motors, • Create torque vectoring and traction control algorithms for optimal field performance, • Integrate motor control systems with vehicle CAN bus networks and tractor control units, • Collaborate with Mechanical Engineers on the development of thermal management systems for high-power motor drives operating in harsh agricultural environments, • Validate motor control performance under real farming conditions including heavy loads and variable terrain, • Produce high quality documentation to be used in a multidisciplinary engineering setting, • 5-15 years experience with high-power motor control systems (50kW+) in automotive or heavy equipment, • High proficiency in CAD, wiring, and PCB layout tools., • Expertise in traction motor control, regenerative braking, and hybrid powertrain systems, • Experience with high-voltage DC systems (400-800V) and associated safety protocols, • Proficiency in automotive communication protocols (CAN, J1939) and vehicle integration, • Strong background in power electronics for high-current motor drives and thermal management, • Experience with diesel-electric or hybrid vehicle architectures and power flow optimization, • Knowledge of automotive/agricultural durability requirements and validation testing procedures, • Desired to have a functional safety standards (ISO 26262, ISO 25119) for agricultural vehicles, • Highly desired to have past experience as a Responsible Engineer or IPT lead., • Willingness to travel ~10% of the time to support products in the production & field environments with a demonstrated ability to work directly with internal and external stakeholders/customers Passion for building teams capable of solving uniquely interesting problems. Innovation while disrupting the market is what we do. Profiled in WSJ and Forbes, Carbon Robotics is poised to become the next billion dollar company in the rapidly growing worldwide Ag-Tech industry. We offer competitive compensation and benefits to our full time US based* employees, including: • Competitive salaries, • Pre-IPO Stock Options, • Generous Benefits:, • Fully-paid medical, dental, and vision insurance premiums for you and all dependents, • Choice of PPO or HDHP/HSA, • Virtual Care - Doctor on Demand, • Employee Assistance Program, • Mental Health HRA, • Restricted Healthcare Travel support, • Menopause Support, • Life Insurance, • Long Term Disability, • Flexible PTO, • 401(k) plan, • Pet Insurance, • Commuter Benefits Carbon Robotics is building a culture of diversity and inclusion for all. We welcome everyone's voice and believe in open and transparent communication. We believe the best products, services, and companies are built by strong teams that include a diversity of backgrounds, perspectives, ideas, and experiences. We are committed to supporting and enabling growth and opportunity for every employee at every level. This is the foundation to which we will build a truly unique environment. We are equally committed to equal employment opportunity, and it is foundational to how we recruit and hire our talented team. Employment is determined based upon capabilities and qualifications without discrimination on the basis of race, creed, color, religion, sex, gender identification and expression, marital status, military status or status as an honorably discharge/veteran, pregnancy (including potential pregnancy, pregnancy-related conditions, and childbearing), sexual orientation, age (40 and over), national origin, ancestry, citizenship or immigration status, physical, mental, or sensory disability , HIV/AIDS or hepatitis C status, genetic information, status as an actual or perceived victim of domestic violence, sexual assault, or stalking, or any other protected class as established by law. #talentacquisition #laserweeding #laserweeder #weedcontrol #agtech #agtechnology #farmtech #robotics #lasers #lasersandrobots #missiondriven #AI #startup #wearehiring #computervision #machinelearning #carbonrobotics

Job Description The Carbon Robotics LaserWeeder™ leverages advanced robotics, computer vision, AI/deep learning, and lasers to eliminate weeds with sub-millimeter accuracy—all without herbicides. This innovative solution reduces environmental impact, promotes soil health, and helps farmers address labor shortages and rising costs. Designed in Seattle and built at our cutting-edge manufacturing facility in Richland, Washington, the LaserWeeder is setting a new standard for automated weed control. With $157 million in funding from prominent investors such as BOND, NVentures (NVIDIA's venture arm), Anthos Capital, Fuse Venture Capital, Ignition Partners, Revolution, Sozo Ventures, and Voyager Capital, Carbon Robotics is driving innovation. As a no-nonsense team with a bias for action, we take pride in executing our ideas. Whether it's designing transformative technology or visiting farms to ensure our products are reliable and safe, we do whatever it takes to deliver for our customers. Working here means tackling big problems with big impact. You'll find opportunities to grow professionally, solve complex challenges, and make meaningful contributions to a mission that matters. At Carbon Robotics, we trust our team to act independently and make practical, real-world decisions. Join us as we innovate, execute, and build the future of farming together. YouTube | X | Instagram | LinkedIn | News As Senior Electrical Engineer at Carbon Robotics, you will be a key part of the team that designs and lays out electrical power distribution systems, PCBs, control systems, and more. Not only will you architect and do detailed designs for the systems you own but you will also test and support them through production and post sales. You'll do whatever it takes - which might include going to the farm - to ensure our customers have reliable and safe products. What you'll do: • Design and integrate complete electrical systems including PCBs, control panels, power distribution, and wiring harnesses for revolutionary products, • Lead trade studies and define electrical system architectures, taking into consideration a wide variety of stakeholders, for electrical systems spanning embedded systems, industrial controls, and power systems., • Own systems from cradle to grave including component level and integrated testing, introduction to production, and post sale support., • Design and validate a variety of high and low voltage systems including 240V AC 3-phase power distribution systems and 24V DC control circuits, • Create system schematics, PCB layouts, industrial panel designs, and harness routing documentation using CAD and analytical modeling tools, • Partner with mechanical and software teams to ensure seamless integration of electrical subsystems into production hardware, • Drive technical decisions through project planning, task delegation, and cross-functional problem solving, • Support contract manufacturers and provide technical guidance for production of electrical assemblies, • 8-15 years experience designing complex electrical systems spanning embedded, power, and industrial applications, • Proficiency in Altium (v18+) for PCB design and Capital Harness or similar for wiring design, • Experience with high and low voltage systems, industrial controls, and safety systems (per SAE, ISO, IPC standards), • Strong background in both digital (microcontrollers, high-speed signals) and analog/power electronics, • Extensive experience designing for harsh outdoor environments and protecting against mechanical, thermal, corrosion and ESD damage., • Experience with SOLIDWORKS Electrical and mechanical integration workflows, • Hands-on hardware debugging skills and experience with automated test equipment design, • Knowledge of PLCs, industrial communication protocols, and sensor integration, • Experience managing electrical aspects of projects through contract manufacturing, • Past experience developing electrical systems for automotive, agricultural, or aerospace vehicles is highly desired. Passion for building teams capable of solving uniquely interesting problems. Innovation while disrupting the market is what we do. Profiled in WSJ and Forbes, Carbon Robotics is poised to become the next billion dollar company in the rapidly growing worldwide Ag-Tech industry. We offer competitive compensation and benefits to our full time US based* employees, including: • Competitive salaries, • Pre-IPO Stock Options, • Generous Benefits:, • Fully-paid medical, dental, and vision insurance premiums for you and all dependents, • Choice of PPO or HDHP/HSA, • Virtual Care - Doctor on Demand, • Employee Assistance Program, • Mental Health HRA, • Restricted Healthcare Travel support, • Menopause Support, • Life Insurance, • Long Term Disability, • Flexible PTO, • 401(k) plan, • Pet Insurance, • Commuter Benefits Carbon Robotics is building a culture of diversity and inclusion for all. We welcome everyone's voice and believe in open and transparent communication. We believe the best products, services, and companies are built by strong teams that include a diversity of backgrounds, perspectives, ideas, and experiences. We are committed to supporting and enabling growth and opportunity for every employee at every level. This is the foundation to which we will build a truly unique environment. We are equally committed to equal employment opportunity, and it is foundational to how we recruit and hire our talented team. Employment is determined based upon capabilities and qualifications without discrimination on the basis of race, creed, color, religion, sex, gender identification and expression, marital status, military status or status as an honorably discharge/veteran, pregnancy (including potential pregnancy, pregnancy-related conditions, and childbearing), sexual orientation, age (40 and over), national origin, ancestry, citizenship or immigration status, physical, mental, or sensory disability , HIV/AIDS or hepatitis C status, genetic information, status as an actual or perceived victim of domestic violence, sexual assault, or stalking, or any other protected class as established by law. #talentacquisition #laserweeding #laserweeder #weedcontrol #agtech #agtechnology #farmtech #robotics #lasers #lasersandrobots #missiondriven #AI #startup #wearehiring #computervision #machinelearning #carbonrobotics

Job Description Controls Field Service Technician - Seattle, WA Our client is a Engineering Design and Commissioning Company that has a national footprint and specializes in MEP / Controls and Critical Facilities Design. They provide design, commissioning, consulting and management expertise in the Critical Facilities Space. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. A fully competent Controls Field Technician - Applies an intensive and diversified knowledge of complete Controls and Building automation systems platforms such as EPMS (Electrical and Power Monitoring Systems), BAS Systems (Building Automation Systems), or BMS System (Building Monitor Systems) in a data center or industrial environment - testing and operations. Responsible for programming, integration, implementation commissioning, maintaining and providing emergency support on critical controls systems at customers' sites within their respective regional area. They will troubleshoot, install, and make upgrades to existing automation systems for power and cooling systems in a live, mission-critical environment. They will assist in complete startup, commissioning, and validation procedures of these systems. They will collaborate with the Electrical and Mechanical Engineering / Design teams, Software Development teams, Project Managers, Construction Contractors, Equipment Vendors, Field Techs and Site Operations teams to ensure the reliability, proper operations, acceptance of new and modified installations, automations and software solutions. Applies an intensive and diversified knowledge of complete BMS, BAS, EPMS - coding, testing and operations. Responsibilities: • Direct and monitor subcontractors (onsite and offsite) including scheduling, resource management and coordination of construction and start-up services as needed. Construction trades generally include various electrical, mechanical and equipment suppliers., • Install and wire BAS controllers and field devices including low voltage cable terminations, • Installation Coordination of BAS / HVAC Controls Systems, • Plan site activities for your team including organize job site materials, logistics, inventory, tools storage and security / access, • Lead installation teams on daily and weekly meetings, • Support the development and execution of additional services through change orders, • Cutover panels and systems in retrofit projects, • Develop and Implement Methods of Procedure (MOPs) for site activities, • Provide input to project team on developing RFIs, estimating and takeoffs for proposals, • Performs commissioning focused design reviews, prepares commissioning test procedures and reports, coordinates and oversees on-site testing, Startup, Commissioning and Closeout of BAS / HVAC Controls Systems, • Assist software lead with pre-functional and functional testing, • Execute troubleshooting of BAS systems including corrective actions, • Participate in commissioning efforts with external stakeholders, • Analyze system operation, work with project team to demonstrate system operation and verify consistency with the contracted scope of work, • Perform QA / QC of BAS and integrated systems using BAS software tools, • Provide installation inspections and other closeout duties to ensure customer acceptance, • Provide markups for shop drawings to document as-built conditions, • Communicate regularly with subcontractors, project managers, clients and commissioning agents on project progress, • Document and track issues and out of scope efforts, • Autonomous in day-to-day work with being given high level instruction on projects or assignments, • Discuss with technical support problems related to maintenance or operation of equipment, • Attend project bid walks, engineering surveys, BAS audits, etc, • QA/QC peer reviews for projects which candidate is not the engineer, • Optimize workflow and deliverables by developing templates, standards, automations, etc., • Communicate regularly with internal and external stakeholders, subcontractors, project managers, AEs and commissioning agents on project progress, • Needs to be located in Pacific Northwest, • Open to traveling to job sites in the region - 75% of the time, • Critical Facilities / Data Center experience a must, • Experience with Distech Controls and Tridium Niagara BAS Platforms highly preferred, • Preferably 3-8+ years experience with BMS /BAS Controls, • Experience with any of the following systems (JCI, Metasys, Siemens, Honeywell, Automated Logic) a plus, • PLC / ALC Experience, • Experience with critical HVAC equipment (Chillers, Air Handlers, CRAC / CRAH units, Boilers, etc.), • Requires knowledge of equipment manufacturer's specifications, • Ability to interpret AE construction drawings, BAS shop drawings, manufacturers wiring diagrams, standards documentation, submittals and product data sheets, • Ability to follow company and site safety requirements, • Must be able to complete Field Service Reports and Assignments accurately and within a timely manner, • Analyze and prepare documents, reports and correspondence, • Candidate must be willing to work nights & weekends when necessary, • MS Office Suite (Excel, Word, Outlook, PowerPoint, Teams), • Previous experience in the Military / Military veterans in all branches that have experience with Electrical / Mechanical is a huge plus (Navy nukes- EMN, ETN, MMNs, Seabees, Army - Power Generation, Air Force – Power Production, Generator Techs, Maritime, Coast Guard, etc.), • Requires excellent verbal, written communication skills & customer relation skills, • Ability to work independently and resourceful with good initiatives, • Client facing experience and at times serve as primary point of client contact on various projects, • Ability to successfully work independently; Self Starter and should prioritize well, • Proactive, resourceful, delegator and a multitasker After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job DescriptionAbout Flexport: At Flexport, we believe global trade can move the human race forward. That's why it's our mission to make global commerce so easy there will be more of it. We're shaping the future of a $10T industry with solutions powered by innovative technology and exceptional people. Today, companies of all sizes—from emerging brands to Fortune 500s—use Flexport technology to move more than $19B of merchandise across 112 countries a year. The recent global supply chain crisis has put Flexport center stage as we continue to play a pivotal role in how goods move around the world. We are proud to have the support of the best investors in the game who believe in our mission, solutions and people. Ready to tackle global challenges that impact business, society, and the environment? Come join us. The Opportunity We are seeking a highly skilled Senior Enterprise Security Engineer to lead the design, implementation, and optimization of our organization's enterprise security architecture. In this role, you will be responsible for safeguarding our systems, services, and data by identifying vulnerabilities, developing robust security solutions, and ensuring compliance with industry standards. The ideal candidate is a strategic thinker and hands-on expert who can operate across multiple disciplines of security. You will: • Evangelize security within the organization., • Improve and maintain SIEM, EDR, and log management tools., • Develop and fine-tune threat detection rules and incident response playbooks., • Conduct application reviews and build compensating security controls., • Serve as an escalation point for security incidents and investigations., • Automate security tasks and monitoring using scripting and modern tools., • Collaborate with internal IT and engineering stakeholders to address security issues and remediate vulnerabilities., • Lead architectural reviews and threat modeling for enterprise applications and platforms., • Ensure alignment with regulatory frameworks., • Conduct risk assessments and support audit and compliance initiatives.You should have:, • Excellence in problem-solving, strategic thinking, and collaboration with cross-functional teams., • 5+ years of security engineering experience supporting SaaS, IaaS, and enterprise solutions., • Strong interpersonal and communications skills., • Experience building security tools in languages such as JavaScript, Python, or Ruby., • Expertise in endpoint protection, network security, IDS/IPS, and cloud security., • Strong proficiency in scripting (Python, Bash, PowerShell) and automation tools., • Hands-on experience with Endpoint Detection and Response, Data Detection and Response, SIEM, Advance Email Security, and Identity Threat Protection., • Solid understanding of modern security protocols, encryption, and authentication standards (SAML, OAuth, TLS, etc.)., • Bachelor's degree in Computer Science, Information Security (or equivalent experience)., • CISSP, GIAC, OSCP, CEH, or similar industry certifications. #LI-onsite The range displayed on each job posting reflects the minimum and maximum target for new hire salaries for the position in the posting's respective region. Our salary ranges are determined by role, level, and location. Within the range displayed, individual pay is determined by work location and additional factors, including job-related skills, experience, and relevant education and / or training. The US base salary range for this position (this does not include bonus, equity and benefits):$115,200—$144,000 USDCommitment to Equal Opportunity At Flexport, our ability to fulfill our mission of making global commerce easy and accessible relies on having a diverse, dedicated and engaged workforce. All qualified applicants will receive consideration for employment regardless of race, color, religion, sex, national origin, age, physical and mental disability, health status, marital and family status, sexual orientation, gender identity and expression, military and veteran status, and any other characteristic protected by applicable law. Global Data Privacy Notice for Job Candidates and Applicants Depending on your location, the General Data Protection Regulation (GDPR) and California Consumer Privacy Act (CCPA) may regulate the way we manage the data of job applicants. By submitting your application, you are agreeing to our use and processing of your data as required. Please see our Privacy Notice available at for additional information.

Job Description We are seeking a proactive and detail-oriented Cybersecurity Engineer to join our growing security team. In this role, you will be responsible for designing, implementing, and maintaining technical security controls across our cloud infrastructure. You will play a critical role in helping the organization meet and maintain compliance with SOC 2, HIPAA, and PCI DSS, while building scalable defenses that support our DevOps and engineering workflows. Responsibilities • Required:, • 5+ years in cybersecurity engineering, cloud security, or DevSecOps., • Deep experience with AWS security services (IAM, KMS, VPC, Config, GuardDuty, etc.)., • Strong proficiency with Terraform and Infrastructure as Code best practices., • Experience with Sumo Logic or equivalent log management tools., • Familiarity with securing CI/CD and development workflows in GitHub., • Demonstrated knowledge and practical experience implementing and maintaining compliance for SOC 2, HIPAA, and PCI DSS., • Strong understanding of vulnerability management, threat detection, and response., • Nice to Have:, • Experience with Kubernetes security (EKS, container scanning)., • Experience writing security policies or helping with control mapping., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Work From Home, • Stock Option Plan

Job DescriptionWe are Fresh. Together let’s build the future. With partners and clients, we practice strategy, design, development, and engineering to harness the power of technology and create what's next. Our cross-disciplinary approach blends human ingenuity and technology, empowering us to meet uncertainty with confidence. What got us to today won’t get us to tomorrow, so we test our assumptions and always strive for growth. From the products we build to the partners we collaborate with, we believe people make the difference. And we do so as a workforce representative of the communities we serve, understanding that a diverse workforce strengthens our organization. We value diversity and support a positive and welcoming environment where all of our employees can thrive. Why join Fresh? Fresh Consulting is a fast-paced, design-led, software development and hardware engineering company, offering end-to-end services to help companies innovate. We bring together amazing UX Designers, sophisticated developers, digital strategists, and top-notch engineers to help companies create fresh experiences that connect humans, systems, and machines. We've been growing fast and need someone to help us continue to manage the delivery of high quality work in a fast-paced environment. See more at freshconsulting.com. What we need: In this role, you will combine your passion and enthusiasm for robotics, open-source software and hardware technologies. You will work alongside Fresh customers and partners to build solutions, identify industry wide technical trends and help guide strategic technical decision making for the Fresh robotics team. The ideal candidate will have extensive experience with robotics engineering, controls theory, robot simulation, Robotic Operation System and Software development on edge. Excellent business and communication skills are a must to develop and define key business questions and to build data sets that answer open questions. You should be able to work well with clients to understand the business requirements and relevant solution paths. Your responsibilities will include, but are not limited to: • Lead technical engagements with partners and customers. This includes participating in pre-sales on-site visits, understanding customer requirements, creating consulting proposals and creating packaged Robotics service offerings., • Mentor and guide the Fresh Robotics team, mapping individual goals into company efforts and align them with current technology roadmaps, • Integrate architectures and solutions into a cohesive product roadmap in partnership with Product Management, identifying risks and leading project success, • Ensure that features and deliverables meet and exceed quality requirements across products, • Define, analyze and review software requirements to meet defined and anticipated customer needs and system quality and performance standards., • Design software architecture and interfaces and implement functionality, typically using a model-based approach., • BS/MS in controls engineering, robotics, computer science, or relevant fields., • 5-10 years professional experience in robotics and robotics applications, with 3+ years developing controls software, • Has experience with control systems development including but not limited to:, • Classical and modern control theory, • Feedback control, state estimation and system identification, • Modeling, simulation and analysis of complex dynamical systems and sensors, • Sensor fusion (e.g. IMU, GPS, LIDAR, RADAR), • Implementation of control algorithms on hardware systems., • Extensive experience in C++/Python programming, software design and architecture, and a history of having successfully driven projects to completion., • Strong understanding of design patterns and Object Oriented Programming (OOP) - concurrency and real-time programming, • Experience developing, simulating, and deploying solutions on mobile robots and robotic arms., • Excellent understanding of ROS (Robot Operating System), including ROS2 Control and MoveIt., • Experience developing software in a Linux environment., • Strong oral and written communication skills. Equal employment opportunity: All qualified persons will be considered for employment without regard to race, color, religion, sex, national origin, age, marital status, familial status, gender identity, sexual orientation, disability for which a reasonable accommodation can be made or any other status protected by law. Assistance will be gladly provided upon request for any applicant with sensory or non-sensory disabilities. *Fresh Consulting is an E-Verify participating company See Fresh in action Powered by JazzHR revYtZmg9K

Job Description Immigration / Work Authorization Notice: At this time, iSpot does not provide visa sponsorship or immigration support for this role. Applicants must already be authorized to work in the United States on a full-time, permanent basis without the need for current or future sponsorship. iSpot competes for the best talent. Our compensation packages consist of salary and equity in one of Seattle's hottest start-ups, as well as other standard benefits. Most importantly, we provide a really interesting working experience, and the chance to contribute to the success of something great. Position Overview: We are seeking an experienced and highly skilled Senior Data Infrastructure Engineer to lead and manage our MySQL and Snowflake database platforms, with additional support for Amazon Redshift. In this role, you will be responsible for the maintenance, administration, upgrades and migration of the databases to support high-performance, scalable, and secure data solutions. You will play a strategic and hands-on role in scaling our data infrastructure, optimizing performance, and ensuring the reliability and security of our mission-critical systems. You will collaborate with cross-functional teams to ensure database systems meet the needs of the organization and maintain optimal performance and reliability. Key Responsibilities: • Database Design and Architecture:., • Develop and enforce database standards, best practices, and security protocols., • Performance Tuning and Optimization:, • Monitor and analyze database performance, identifying bottlenecks and implementing solutions to improve efficiency., • Perform query optimization and tuning for complex workloads., • Manage database caching, indexing, and resource allocation., • Data Management and Integration:, • Collaborate with data engineering teams to ensure seamless integration between data sources, warehouses, and applications., • Manage data lifecycle policies, including archiving and purging., • Access, Maintenance and Operations:, • Administer and optimize environments including user access, roles, resource monitors, and cost controls., • Implement and manage backup and recovery strategies wherever needed and applicable, • Implement robust backup and disaster recovery strategies, • Ensure database systems are highly available and resilient, including configuring replication and clustering as needed., • Perform routine maintenance tasks such as patching, upgrades, and storage management., • Automate database operations using scripts and tools, • Monitoring and Security:, • Implement monitoring solutions to proactively detect and resolve database issues., • Ensure compliance with data security policies and regulatory requirements., • Manage access controls, encryption, and auditing for database environments., • Collaboration and Leadership:, • Provide guidance and mentorship to junior team members., • Collaborate with software developers, data engineers, and analysts to align database solutions with business needs., • Participate in capacity planning, budgeting, and strategic decision-making for database technologies., • Snowflake specific responsibilities:, • Collaborate with data engineers and analytics teams to support ELT/ETL pipelines, • Education: Bachelor's degree in Computer Science, Information Technology, or related field. Equivalent experience will also be considered., • Experience: Minimum 7+ years of experience managing databases, with at least 3 years specializing in MySQL, Snowflake and Redshift Spectrum., • Skills and Knowledge:, • Proficiency in database administration, including replication, clustering, and high availability., • Expertise in MySQL, Snowflake, Amazon Redshift and Redshift Spectrum, including query tuning, partitioning, and data lake integration., • Strong understanding of SQL and database internals, including storage engines and query execution plans., • Experience with data pipeline tools (e.g., Apache Airflow, AWS Glue)., • Knowledge of monitoring tools (e.g., CloudWatch, Prometheus) and scripting languages (e.g., Python, Bash)., • AWS certifications (e.g., AWS Certified Solutions Architect, AWS Certified Database Specialty)., • Experience with big data technologies such as Hadoop, Hive, or Spark., • Familiarity with DevOps practices, including both infrastructure as code (Terraform) and CI/CD pipelines for database deployments and managing users, • Excellent problem-solving and analytical skills., • Strong communication and collaboration abilities. Target cash compensation range: $136,100.00 - $174,210.00 USD Annually We are committed to providing competitive, market-informed compensation. The cash compensation above includes base salary, variable commission for employees in eligible roles, and annual bonus targets for eligible roles. In addition to cash compensation, all full time iSpotters are eligible to participate in iSpot's equity plan to receive stock options. Non-exempt roles will also be eligible for (pre-approved) overtime pay. Individual compensation packages are influenced by different factors unique to each candidate, including their skills, experience, qualifications and other job-related reasons. For more information on total rewards package, go HERE Hybrid & Flexible Workplace Policy iSpot supports a hybrid and flexible workplace. Depending on location and work responsibilities, employees may be designated as full-time or part-time office-based or a fully remote employee. A hybrid work schedule indicates that you work in the office some days and work from home other days. The best hybrid workplaces allow for flexibility while also encouraging consistency. Those local or living in surrounding areas to one of our offices (Bellevue, WA; El Segundo, CA; New York, NY) will work a hybrid schedule, coming into their local office 1-3 days a week. While those in a role, not office-based and located further away from our offices, will work a fully remote schedule. If you have questions regarding exact details of our hybrid & flexible workplace policy, please let your recruiter know and they will discuss with you further. #LI-Remote If you don't feel you met every single requirement for the role, don't rule yourself out. Please apply anyway! iSpot is an equal opportunity employer. All applicants will receive consideration for employment without regard to race, ethnicity, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. If you need assistance and/or a reasonable accommodation due to a disability during the application or the recruiting process, please contact our HR team. California Residents applying for positions at iSpot can access our California Consumer Privacy Act here.

Job DescriptionField Service Engineer Field Application Engineer Everett, WA 20% - 25% Travel $80K - $110K + Overtime Pay Position Overview Aerospace equipment manufacturer looking to hire a Field Service Technician! The Field Application Engineer will be part of the post-sales team and is responsible for the installation, maintenance, and repair of our machinery and associated control systems at our client locations. The ideal candidate will have a strong technical background and the ability to troubleshoot complex mechanical and electrical issues in a field environment. Our machinery is very niche, but the core technical skills required is 5-axis CNC machining with FANUC controls. Key Responsibilities • Execute programming tasks to implement solutions, perform calibrations, and carry out adjustment procedures., • Diagnose and resolve technical issues encountered during equipment commissioning and throughout the time period our clients use our equipment, • Troubleshoot and resolve technical issues related to Siemens and Fanuc controls., • Provide training and support to customers on the operation of their machinery., • Document service activities and maintain accurate records of repairs and maintenance performed., • 5+ years of experience installing, troubleshooting, calibrating, and/or programming 5-Axis CNC machines, • Experience with Fanuc control system, • Experience with Siemens AND Fanuc control systems preferred, • Experience with PLC programming and troubleshooting., • Ability to read and interpret technical drawings and manuals., • Excellent problem-solving skills and attention to detail. Benefits • Vacation/PTO, • Medical, • Dental, • Vision, • 401k, • Gas/mileage reimbursement, • All out of state travel paid for • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 07/21/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job Description Impinj is a leading RAIN RFID provider and Internet of Things pioneer. We're inventing ways to connect every thing to the Internet — including retail apparel, retail general merchandise, healthcare items, automobile parts, airline baggage, food and much more. With more than 100 billion items connected to date, and multiple Fortune 500 enterprises around the world using our platform, we solve for a better understanding of our world. If it's a thing, we're working to connect it. Join Impinj and help us realize our vision of a boundless IoT— connecting trillions of everyday items to the Internet. Team Overview: We are seeking a Data Engineer with deep experience in managing and processing high-volume IoT data to enable the cloud-based training of machine learning models that power real-time inference on edge devices. In this role, you will architect and maintain cloud-based data infrastructure and pipelines that support ML workflows for training, validation, and deployment of machine learning models optimized for deployment in edge environments. This is a multi-functional role requiring close collaboration with ML engineers, systems engineers, cloud architects, and embedded systems teams to deliver high-quality, efficient, and scalable data solutions that power intelligent behavior on resource-constrained devices such as fixed and handheld RFID readers. What You Will Do: • Design data workflows to support model training, evaluation, and retraining cycles for deployment on edge devices, • Work closely with ML engineers to align data formats, labeling standards, feature extraction for edge-compatible models, and feedback loops for model improvement, • Architect and maintain scalable data pipelines to ingest, process, store, and access large volumes of structured and semi-structured RFID time-series data from edge networks, • Develop automated systems for data versioning, labeling, augmentation, and quality assurance, • Establish and maintain data APIs and interfaces to query, consume, and update datasets, • Manage large datasets using distributed storage and compute frameworks (e.g., Apache Spark, Hadoop, or Dask), • Ensure data security, compliance, and consistency across the full data lifecycle, • Drive improvements in data performance and reliability, especially for low-latency ML inference use cases, • Implement robust ETL/ELT workflows for preparing data for cloud-based ML model training and evaluation, • Collaborate and coordinate with large scale data collection projects, • Monitor and optimize data pipelines for performance, reliability, and cost across edge-to-cloud infrastructure, • Optimize data flow and compute for performance, cost, and latency in hybrid edge-cloud environmentsWhat You Will Bring:, • Bachelor's degree in Data Engineering, Electrical Engineering or a related field and 8 years of related experience, or equivalent combination of education and experience, • 8+ years of experience in data engineering working with Machine Learning pipelines, • Deep understanding of data pipeline design, ETL/ELT processes, automated workflow orchestration (e.g. Apache Airflow), • Strong programming skills in Python (especially for data workflows), with experience building scalable, maintainable pipelines. (e.g. Pandas, numpy), • Strong experience with structured and unstructured databases (SQL, MongoDB, DuckDB), • Strong understanding of cloud infrastructure (AWS, Azure, or GCP), especially cloud storage, compute, and ML tools (e.g., SageMaker, Vertex AI, Azure ML), • Experience with data lake/data warehouse technologies (e.g., S3 + Glue, BigQuery, Snowflake, Delta Lake), • Knowledge of machine learning model lifecycles, including training, validation, and deployment, • Understanding of data versioning, feature engineering, and ML lifecycle management, • Understanding of machine learning data needs, including labeling, versioning, and model-ready dataset preparation The typical base pay range for this role across the US is $129,000 - $200,000. Individual base pay depends on various factors such as complexity and responsibility of role, job duties, requirements, and relevant experience and skills. Both market wage data and the mid-point of the pay range is reviewed and used as the starting point for all new hire offers. Offers are made within the base pay range applicable at the time. At Impinj certain roles are eligible for additional rewards, including merit increases, annual bonus and stock. These awards are allocated based on individual performance. In addition, certain roles also have the opportunity to earn sales incentives based on revenue or utilization, depending on the terms of the plan and the employee's role. US based employees have access to healthcare benefits; a 401(k) plan and company match among others. For a more comprehensive list of US employment benefits, click here. US Export Controls: This position has access to technologies or data subject to U.S. export control regulations. Under these laws, the release or transfer of export-controlled items or information to individuals who are not classified as "U.S. persons" (as defined by Immigration & Nationality Act) may require prior authorization from the U.S. government. We may require additional documentation related to national identity to determine whether an export compliance license is required for any export-controlled items. This information is requested solely for the purpose of complying with U.S. export control laws and will not be used for other purposes. Learn more about export compliance here. Why work at Impinj: Know you're making a difference. Competitive benefits. Support for remote work or a desk with a view. Weekly Q&A sessions with our executive team. Impinj provides an environment that fosters openness and innovation and is developing technology that delivers a positive impact on the world. Collaboration and teamwork are highly valued, and accomplishments are duly celebrated. We have an open paid time-off policy paired with a respect for work/life balance. Our headquarters is located in Seattle with spectacular views of the Olympics, Lake Union, and Mt Baker, which can be enjoyed from our rooftop deck. Our Brazilian site is in Porto Alegre, Rio Grande do Sul state, at "Tecnopuc," a technology park that offers a very nice workplace for the development of groundbreaking technologies. Impinj is committed to creating a diverse and inclusive work environment and welcomes applicants from all backgrounds. We are an equal opportunity employer and do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.

Job Description Impinj is a leading RAIN RFID provider and Internet of Things pioneer. We're inventing ways to connect every thing to the Internet — including retail apparel, retail general merchandise, healthcare items, automobile parts, airline baggage, food and much more. With more than 100 billion items connected to date, and multiple Fortune 500 enterprises around the world using our platform, we solve for a better understanding of our world. If it's a thing, we're working to connect it. Join Impinj and help us realize our vision of a boundless IoT— connecting trillions of everyday items to the Internet. Team Overview: Our fast paced, highly collaborative IT team is seeking an experienced and collaborative Senior Systems Engineer to join our growing team. We are looking for someone who possesses a wide array of skills and have experience across multiple technology disciplines, including network, storage, server, disaster recovery, directory services, identity management, security, scripting for automation to deliver business value. What You Will Do: • Monitoring and maintaining our growing AWS and Linux production and development environments, • Organize and execute our modern infrastructure strategy, solve difficult problems, help build technical acumen and knowledge transfer across the team, and ensure our infrastructure operations are secure, predictable, and scalable, • Design, deploy, and manage servers, storage solutions, and network infrastructure, • Monitor system performance and troubleshoot issues to ensure high availability and reliability, • Ensure data integrity and availability through regular testing, • Actively mentor less experienced engineers and provide thoughtful, constructive feedback, • Solve complex puzzles and provide excellent customer service, • Execute project tasks that drive our growth strategy, • Advocate for best practices in maintaining system security and providing great customer service, • Embody our culture and values, including fostering an inclusive team cultureWhat You Will Bring:, • Bachelor's degree in Computer Science, Information Technology, or a related field, • Minimum of 7 years of experience in Linux systems engineering or a similar role, • Proven experience with server virtualization, storage systems, and network infrastructure, • Expert skills in managing and maintaining Linux systems (RHEL and Ubuntu LTS), • Expert skills in automation using scripting languages (e.g., PowerShell, Bash,, • Strong written and verbal communication in English, • Advanced Configuration Management using Ansible and Terraform to enforce standards, • Experience with the creation and deployment of system images in an enterprise environment, • Certification as Red Hat Certified System Administrator or CompTIA Linux+, • Certifications such as AWS Certified Solutions Architect, Azure Administrator (AZ-800, AZ-801), Cisco Certified Network Professional (CCNP), or VMware Certified Professional (VCP), • Strong knowledge of Windows server operating systems, architecture, and domain administration (DNS, DHCP, NPS and CA) The typical base pay range for this role is $115,000- $190,000. Individual base pay depends on various factors such as complexity and responsibility of the role, job duties, requirements and relevant experience and skills. Impinj reviews market wage data and uses the midpoint of the pay range as the starting point for offers. Impinj makes offers within the base pay range applicable at the time. At Impinj certain roles are eligible for additional rewards, including merit increases, annual bonuses and stock. These awards are allocated based on individual performance. In addition, certain roles have the opportunity to earn sales incentives based on revenue or utilization, depending on the terms of the plan and the employee's role. US based employees have access to healthcare benefits, a 401(k) plan and company match among others. For a more comprehensive list of US employment benefits, click here. US Export Controls: This position has access to technologies or data subject to U.S. export control regulations. Under these laws, the release or transfer of export-controlled items or information to individuals who are not classified as "U.S. persons" (as defined by Immigration & Nationality Act) may require prior authorization from the U.S. government. We may require additional documentation related to national identity to determine whether an export compliance license is required for any export-controlled items. This information is requested solely for the purpose of complying with U.S. export control laws and will not be used for other purposes. Learn more about export compliance here. Why work at Impinj: Know you're making a difference. Competitive benefits. Support for remote work or a desk with a view. Weekly Q&A sessions with our executive team. Impinj provides an environment that fosters openness and innovation and is developing technology that delivers a positive impact on the world. Collaboration and teamwork are highly valued, and accomplishments are duly celebrated. We have an open paid time-off policy paired with a respect for work/life balance. Our headquarters is located in Seattle with spectacular views of the Olympics, Lake Union, and Mt Baker, which can be enjoyed from our rooftop deck. Our Brazilian site is in Porto Alegre, Rio Grande do Sul state, at "Tecnopuc," a technology park that offers a very nice workplace for the development of groundbreaking technologies. Impinj is committed to creating a diverse and inclusive work environment and welcomes applicants from all backgrounds. We are an equal opportunity employer and do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.

Job Description Impinj is a leading RAIN RFID provider and Internet of Things pioneer. We're inventing ways to connect every thing to the Internet — including retail apparel, retail general merchandise, healthcare items, automobile parts, airline baggage, food and much more. With more than 100 billion items connected to date, and multiple Fortune 500 enterprises around the world using our platform, we solve for a better understanding of our world. If it's a thing, we're working to connect it. Join Impinj and help us realize our vision of a boundless IoT— connecting trillions of everyday items to the Internet. Team Overview: We are looking for experienced semiconductor Test Engineer to join the Impinj Product and Test Engineering team to work on the next generation of End-point and Reader IC's. They will use their expertise in test methodology and knowledge of test hardware to create, deploy, and maintain test solutions running on production ATE. These solutions will enable characterization, qualification, and production for Impinj's End-point and Reader IC's. What You Will Do: • Complete test programs throughout all phases of the design process, • Implement test plans, specifications, and procedures in accordance with quality assurance program requirements, • Release test programs and hardware on the ATE (Automated Testing Equipment) for characterization and production testing of silicon devices, • Update and optimize silicon test programs from test requirement documentation, • Purchase ATE hardware for NPI and production, including Load Board, probe card, and interface, • Analyze large data sets using JMP, SQL, Matlab and review results with test and design engineering teams, • Qualify new test hardware and software for release in a production environment, • Contribute to cost reduction efforts such as yield improvement, test time reduction, and test elimination, • Collaborate with Impinj's overseas teams to transfer products into high-volume testing, • Investigate production yield issues and product returns to determine root cause and implement corrective actionsWhat You Will Bring:, • Bachelor's degree in electrical engineering, computer engineering, or similar discipline with 5+ years of experience, • Product engineering experience with familiarity in ATE coverage, margin, and binning, • Direct experience with wafer or die ATE testing, NI/Emerson TestStand, and Semiconductor Test System (STS) is preferred, • The ability to perform conducted RF measurements including S-parameters, AM/PM, compression, noise figure, harmonics/spurious emission, phase noise, switching speed, bit error rate, adjacent channel power, and group delay, • Strong analytical, planning, and organizational skills The typical base pay range for this role across the US is $111,200 - $166,800. Individual base pay depends on various factors such as complexity and responsibility of role, job duties, requirements, and relevant experience and skills. Both market wage data and the mid-point of the pay range is reviewed and used as the starting point for all new hire offers. Offers are made within the base pay range applicable at the time. At Impinj certain roles are eligible for additional rewards, including merit increases, annual bonus and stock. These awards are allocated based on individual performance. In addition, certain roles also have the opportunity to earn sales incentives based on revenue or utilization, depending on the terms of the plan and the employee's role. US based employees have access to healthcare benefits; a 401(k) plan and company match among others. For a more comprehensive list of US employment benefits, click here. US Export Controls: This position has access to technologies or data subject to U.S. export control regulations. Under these laws, the release or transfer of export-controlled items or information to individuals who are not classified as "U.S. persons" (as defined by Immigration & Nationality Act) may require prior authorization from the U.S. government. We may require additional documentation related to national identity to determine whether an export compliance license is required for any export-controlled items. This information is requested solely for the purpose of complying with U.S. export control laws and will not be used for other purposes. Learn more about export compliance here. Why work at Impinj: Know you're making a difference. Competitive benefits. Support for remote work or a desk with a view. Weekly Q&A sessions with our executive team. Impinj provides an environment that fosters openness and innovation and is developing technology that delivers a positive impact on the world. Collaboration and teamwork are highly valued, and accomplishments are duly celebrated. We have an open paid time-off policy paired with a respect for work/life balance. Our headquarters is located in Seattle with spectacular views of the Olympics, Lake Union, and Mt Baker, which can be enjoyed from our rooftop deck. Our Brazilian site is in Porto Alegre, Rio Grande do Sul state, at "Tecnopuc," a technology park that offers a very nice workplace for the development of groundbreaking technologies. Impinj is committed to creating a diverse and inclusive work environment and welcomes applicants from all backgrounds. We are an equal opportunity employer and do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.

Job Description Impinj is a leading RAIN RFID provider and Internet of Things pioneer. We're inventing ways to connect every thing to the Internet — including retail apparel, retail general merchandise, healthcare items, automobile parts, airline baggage, food and much more. With more than 100 billion items connected to date, and multiple Fortune 500 enterprises around the world using our platform, we solve for a better understanding of our world. If it's a thing, we're working to connect it. Join Impinj and help us realize our vision of a boundless IoT— connecting trillions of everyday items to the Internet. Team Overview: Impinj is seeking a Principal Machine Learning Engineer specializing in Applied Algorithms to join our Platform Engineering team. This role will work closely with an interdisciplinary team that researches and develops innovative RAIN RFID solutions at massive scale. In this position, you will work in collaboration with our Platform Software, Hardware, and Systems Engineering teams to design and develop experimental RAIN RFID algorithms and model our Platform Solutions, which are foundations of our enterprise engagements. The Platform Engineering team works closely with our Enterprise customers and outside partners to drive optimizations in tool-building development and deployment of RAIN RFID solutions. Our platform of tags, readers and gateways, and software is what allows us to give a digital identity to billions of everyday items. If you have a passion for using technology to spectacularly change the way companies run their business, this is the role for you. What you will do: • Leverage your Machine Learning and Algorithms development to research, develop and deploy RAIN solution algorithms to address our enterprise customer needs, • Pioneer new RAIN RFID applications that help customers solve real world problems across different use cases and industries, • Collaborate with multi-functional partners, such as our Software, Hardware and System Engineering teams and Go-to-Market team to design effective machine learning solutions, • Collaborate with outside partners and customers to develop and deploy novel RAIN RFID solutions based on the Impinj platform, • Create metrics and configure A/B testing to evaluate model performance offline and online to advise and convey our impacts to technical and non-technical collaborators, • Staying up-to-date with the latest machine learning research and techniques, and incorporating them into your work as appropriate, • Create proof of concept demonstrations for customers and partners to show potential uses of our RAIN RFID platform, • Leverage the insights derived from data coming from enterprise customer deployments to assess and improve system performance and build system behavior models, • Document the algorithm development process and communicate results effectively to team members and key stakeholders. This includes writing technical reports, creating visualizations, and presenting findings., • Redefine raw data into a high-quality, structured format, including data cleaning, correcting errors, handling missing values, integrating data from multiple sources, creating new engineered features, and scaling variables to enhance model performance and ensure accurate, reliable predictions., • Operate with a hybrid working environment with a few days of the week working from our Lab in North Beacon Hill and/or our office in South Lake Union with the rest of the time working from homeWhat you will bring:, • Bachelor's degree in Computer Science or related technical field, • At least 15 years of experience building end-to-end machine learning products, from data gathering, to model training and tuning, to deploying to production and monitoring its performance., • Algorithm design: implementation of machine learning algorithms and models, customization of traditional and state of the art models to fit specific problems, performance optimization through hyperparameter tuning, and evaluation of scalability, paying specialattention to efficient implementations, rigorous testing, and iterative refining models based on performance metrics and feedback., • Advanced Programming Skills: Proficiency in languages such as Python, R, C++, along with experience in machine learning libraries and frameworks like TensorFlow, PyTorch, and scikit-learn, • Advanced understanding of linear algebra, calculus, probability, and statistics aided to the development and analysis of machine learning models. This includes knowledge of matrix operations, differentiation and integration, probability distributions, and statistical inference, enabling the creation of robust algorithms and accurate predictions from complex data set., • Demonstrated experience in version control systems like Git for tracking changes and collaborating on code., • Good understanding of the software development lifecycle, structured project management, collaborative coding practices (such as code reviews and pair programming), and continuous enhancement of code quality., • Experience with algorithm optimization, parallel processing, and efficient data structures to ensure scalable, high-performance applications., • Experience in leading multi-functional projects and teams of SW, FW and Data Engineers and possibly external partners or customer teams. Strong communication skills to convey complex technical concepts to the teammates and to non-technical stakeholders and leadership abilities to guide and mentor teams. Compensation & Benefits: The benefits listed below may vary depending on the nature of your employment with Impinj and the country where you work. The typical base pay range for this role across the US is $168,000 - $267,000. Individual base pay depends on various factors such as complexity and responsibility of role, job duties, requirements, and relevant experience and skills. Both market wage data and the mid-point of the pay range is reviewed and used as the starting point for all new hire offers. Offers are made within the base pay range applicable at the time. At Impinj certain roles are eligible for additional rewards, including merit increases, annual bonus and stock. These awards are allocated based on individual performance. In addition, certain roles also have the opportunity to earn sales incentives based on revenue or utilization, depending on the terms of the plan and the employee's role. US based employees have access to healthcare benefits; a 401(k) plan and company match among others. For a more comprehensive list of US employment benefits, click here. US Export Controls: This position has access to technologies or data subject to U.S. export control regulations. Under these laws, the release or transfer of export-controlled items or information to individuals who are not classified as "U.S. persons" (as defined by Immigration & Nationality Act) may require prior authorization from the U.S. government. We may require additional documentation related to national identity to determine whether an export compliance license is required for any export-controlled items. This information is requested solely for the purpose of complying with U.S. export control laws and will not be used for other purposes. Learn more about export compliance here. Why work at Impinj: Know you're making a difference. Competitive benefits. Support for remote work or a desk with a view. Weekly Q&A sessions with our executive team. Impinj provides an environment that fosters openness and innovation and is developing technology that delivers a positive impact on the world. Collaboration and teamwork are highly valued, and accomplishments are duly celebrated. We have an open paid time-off policy paired with a respect for work/life balance. Our headquarters is located in Seattle with spectacular views of the Olympics, Lake Union, and Mt Baker, which can be enjoyed from our rooftop deck. Our Brazilian site is in Porto Alegre, Rio Grande do Sul state, at "Tecnopuc," a technology park that offers a very nice workplace for the development of groundbreaking technologies. Impinj is committed to creating a diverse and inclusive work environment and welcomes applicants from all backgrounds. We are an equal opportunity employer and do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.

Job Description Impinj is a leading RAIN RFID provider and Internet of Things pioneer. We're inventing ways to connect every thing to the Internet — including retail apparel, retail general merchandise, healthcare items, automobile parts, airline baggage, food and much more. With more than 100 billion items connected to date, and multiple Fortune 500 enterprises around the world using our platform, we solve for a better understanding of our world. If it's a thing, we're working to connect it. Join Impinj and help us realize our vision of a boundless IoT— connecting trillions of everyday items to the Internet. Team Overview: We are looking for experienced semiconductor/ RF hardware Test Engineer to join the Impinj Product and Test Engineering team to work on the next generation of End-point and Reader IC's. They will use their expertise in test methodology and knowledge of test hardware to create, deploy, and maintain test solutions running on production ATE. These solutions will enable characterization, qualification, and production for Impinj's End-point and Reader IC's. What You Will Do: • Lead and implement the development of test programs and hardware on the ATE (Automated Testing Equipment) for characterizing and testing silicon products, • Optimize yield, test time, multi-site count, and parallel test efficiency to ensure outstanding performance, • Develop RF wafer-level tests in a large-volume production test environment, • Reduce and analyze large data sets using JMP, SQL, Matlab, and other tools, • Analyze data sets across time and products, presenting recommendations to the design team, • Serve as the first point of contact for failure analysis, identifying issues related to setup, code, artifacts, silicon, logic/physical blocks, and more, • Develop and implement design requirements, test plans, specifications, and procedures in accordance with quality assurance program requirements, • Collaborate with Process, Analog, and Digital IC design teams to define and develop characterization, qualification, and production test programs, • Apply troubleshooting skills to debug and resolve measurement-related issuesWhat You Will Bring:, • Bachelor's or Master's degree (or equivalent experience) in Electrical Engineering with 15+ years of industry experience testing silicon products on ATE in a production environment, • Proficiency in writing test programs in C# and experience with NI/Emerson test executive (TestStand) and STS (Semiconductor Test Software), • Hands-on experience writing, debugging, and optimizing test programs and hardware (probe card, load boards, and cable) for silicon products, • Strong knowledge of the NI STS T2 and T4 tester architectures, • Experience with statistical process control methodologies and software, • Direct experience in leading a team of test and product engineers, • Experience working with local and offshore OSATs, • Experience with Accretech UF3000 and FP 3000 or equivalent 300mm prober operation, • Knowledge of die packaging technologies and board-level testing, including the NI PXI Station test architecture, • Demonstrated project management, teamwork, mentorship, and leadership skills necessary for successful project completion, • Excellent documentation, organizational, and communication skills, • Experience working with products that have RF, NVM, or high-speed communications The typical base pay range for this role across the US is $179,900 - $269,600. Individual base pay depends on various factors such as complexity and responsibility of role, job duties, requirements, and relevant experience and skills. Both market wage data and the mid-point of the pay range is reviewed and used as the starting point for all new hire offers. Offers are made within the base pay range applicable at the time. At Impinj certain roles are eligible for additional rewards, including merit increases, annual bonus and stock. These awards are allocated based on individual performance. In addition, certain roles also have the opportunity to earn sales incentives based on revenue or utilization, depending on the terms of the plan and the employee's role. US based employees have access to healthcare benefits; a 401(k) plan and company match among others. For a more comprehensive list of US employment benefits, click here. US Export Controls: This position has access to technologies or data subject to U.S. export control regulations. Under these laws, the release or transfer of export-controlled items or information to individuals who are not classified as "U.S. persons" (as defined by Immigration & Nationality Act) may require prior authorization from the U.S. government. We may require additional documentation related to national identity to determine whether an export compliance license is required for any export-controlled items. This information is requested solely for the purpose of complying with U.S. export control laws and will not be used for other purposes. Learn more about export compliance here. Why work at Impinj: Know you're making a difference. Competitive benefits. Support for remote work or a desk with a view. Weekly Q&A sessions with our executive team. Impinj provides an environment that fosters openness and innovation and is developing technology that delivers a positive impact on the world. Collaboration and teamwork are highly valued, and accomplishments are duly celebrated. We have an open paid time-off policy paired with a respect for work/life balance. Our headquarters is located in Seattle with spectacular views of the Olympics, Lake Union, and Mt Baker, which can be enjoyed from our rooftop deck. Our Brazilian site is in Porto Alegre, Rio Grande do Sul state, at "Tecnopuc," a technology park that offers a very nice workplace for the development of groundbreaking technologies. Impinj is committed to creating a diverse and inclusive work environment and welcomes applicants from all backgrounds. We are an equal opportunity employer and do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.

Job Description Impinj is a leading RAIN RFID provider and Internet of Things pioneer. We're inventing ways to connect every thing to the Internet — including retail apparel, retail general merchandise, healthcare items, automobile parts, airline baggage, food and much more. With more than 100 billion items connected to date, and multiple Fortune 500 enterprises around the world using our platform, we solve for a better understanding of our world. If it's a thing, we're working to connect it. Join Impinj and help us realize our vision of a boundless IoT— connecting trillions of everyday items to the Internet. Team Overview: We are looking for experienced semiconductor Test Engineer to join the Impinj Product and Test Engineering team to work on the next generation of End-point and Reader IC's. They will use their expertise in test methodology and knowledge of test hardware to create, deploy, and maintain test solutions running on production ATE. These solutions will enable characterization, qualification, and production for Impinj's End-point and Reader IC's. What You Will Do: • Lead and implement the development of test programs and hardware on the ATE (Automated Testing Equipment) for characterizing and testing silicon products, • Optimize yield, test time, multi-site count, and parallel test efficiency to ensure outstanding performance, • Develop RF wafer-level tests in a large-volume production test environment, • Reduce and analyze large data sets using JMP, SQL, Matlab, and other tools, • Analyze data sets across time and products, presenting recommendations to the design team, • Serve as the first point of contact for failure analysis, identifying issues related to setup, code, artifacts, silicon, logic/physical blocks, and more, • Develop and implement design requirements, test plans, specifications, and procedures in accordance with quality assurance program requirements, • Collaborate with Process, Analog, and Digital IC design teams to define and develop characterization, qualification, and production test programs, • Apply troubleshooting skills to debug and resolve measurement-related issuesWhat You Will Bring:, • Bachelor's or Master's degree (or equivalent experience) in Electrical Engineering with 15+ years of industry experience testing silicon products on ATE in a production environment, • Proficiency in writing test programs in C# and experience with NI/Emerson test executive (TestStand) and STS (Semiconductor Test Software), • Hands-on experience writing, debugging, and optimizing test programs and hardware (probe card, load boards, and cable) for silicon products, • Strong knowledge of the NI STS T2 and T4 tester architectures, • Experience with statistical process control methodologies and software, • Direct experience in leading a team of test and product engineers, • Experience working with local and offshore OSATs, • Experience with Accretech UF3000 and FP 3000 or equivalent 300mm prober operation, • Knowledge of die packaging technologies and board-level testing, including the NI PXI Station test architecture, • Demonstrated project management, teamwork, mentorship, and leadership skills necessary for successful project completion, • Excellent documentation, organizational, and communication skills, • Experience working with products that have RF, NVM, or high-speed communications The typical base pay range for this role across the US is $179,900 - $269,600. Individual base pay depends on various factors such as complexity and responsibility of role, job duties, requirements, and relevant experience and skills. Both market wage data and the mid-point of the pay range is reviewed and used as the starting point for all new hire offers. Offers are made within the base pay range applicable at the time. At Impinj certain roles are eligible for additional rewards, including merit increases, annual bonus and stock. These awards are allocated based on individual performance. In addition, certain roles also have the opportunity to earn sales incentives based on revenue or utilization, depending on the terms of the plan and the employee's role. US based employees have access to healthcare benefits; a 401(k) plan and company match among others. For a more comprehensive list of US employment benefits, click here. US Export Controls: This position has access to technologies or data subject to U.S. export control regulations. Under these laws, the release or transfer of export-controlled items or information to individuals who are not classified as "U.S. persons" (as defined by Immigration & Nationality Act) may require prior authorization from the U.S. government. We may require additional documentation related to national identity to determine whether an export compliance license is required for any export-controlled items. This information is requested solely for the purpose of complying with U.S. export control laws and will not be used for other purposes. Learn more about export compliance here. Why work at Impinj: Know you're making a difference. Competitive benefits. Support for remote work or a desk with a view. Weekly Q&A sessions with our executive team. Impinj provides an environment that fosters openness and innovation and is developing technology that delivers a positive impact on the world. Collaboration and teamwork are highly valued, and accomplishments are duly celebrated. We have an open paid time-off policy paired with a respect for work/life balance. Our headquarters is located in Seattle with spectacular views of the Olympics, Lake Union, and Mt Baker, which can be enjoyed from our rooftop deck. Our Brazilian site is in Porto Alegre, Rio Grande do Sul state, at "Tecnopuc," a technology park that offers a very nice workplace for the development of groundbreaking technologies. Impinj is committed to creating a diverse and inclusive work environment and welcomes applicants from all backgrounds. We are an equal opportunity employer and do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.

Job Description Impinj is a leading RAIN RFID provider and Internet of Things pioneer. We're inventing ways to connect every thing to the Internet — including retail apparel, retail general merchandise, healthcare items, automobile parts, airline baggage, food and much more. With more than 100 billion items connected to date, and multiple Fortune 500 enterprises around the world using our platform, we solve for a better understanding of our world. If it's a thing, we're working to connect it. Join Impinj and help us realize our vision of a boundless IoT— connecting trillions of everyday items to the Internet. Team Overview: We are looking for experienced semiconductor/RF hardware Test Engineer to join the Impinj Product and Test Engineering team to work on the next generation of End-point and Reader IC's. They will use their expertise in test methodology and knowledge of test hardware to create, deploy, and maintain test solutions running on production ATE. These solutions will enable characterization, qualification, and production for Impinj's End-point and Reader IC's. What You Will Do: • Complete test programs throughout all phases of the design process, • Implement test plans, specifications, and procedures in accordance with quality assurance program requirements, • Release test programs and hardware on the ATE (Automated Testing Equipment) for characterization and production testing of silicon devices, • Update and optimize silicon test programs from test requirement documentation, • Purchase ATE hardware for NPI and production, including Load Board, probe card, and interface, • Analyze large data sets using JMP, SQL, Matlab and review results with test and design engineering teams, • Qualify new test hardware and software for release in a production environment, • Contribute to cost reduction efforts such as yield improvement, test time reduction, and test elimination, • Collaborate with Impinj's overseas teams to transfer products into high-volume testing, • Investigate production yield issues and product returns to determine root cause and implement corrective actionsWhat You Will Bring:, • Bachelor's degree in electrical engineering, computer engineering, or similar discipline with 5+ years of experience, • Product engineering experience with familiarity in ATE coverage, margin, and binning, • Direct experience with wafer or die ATE testing, NI/Emerson TestStand, and Semiconductor Test System (STS) is preferred, • The ability to perform conducted RF measurements including S-parameters, AM/PM, compression, noise figure, harmonics/spurious emission, phase noise, switching speed, bit error rate, adjacent channel power, and group delay, • Strong analytical, planning, and organizational skills The typical base pay range for this role across the US is $111,200 - $166,800. Individual base pay depends on various factors such as complexity and responsibility of role, job duties, requirements, and relevant experience and skills. Both market wage data and the mid-point of the pay range is reviewed and used as the starting point for all new hire offers. Offers are made within the base pay range applicable at the time. At Impinj certain roles are eligible for additional rewards, including merit increases, annual bonus and stock. These awards are allocated based on individual performance. In addition, certain roles also have the opportunity to earn sales incentives based on revenue or utilization, depending on the terms of the plan and the employee's role. US based employees have access to healthcare benefits; a 401(k) plan and company match among others. For a more comprehensive list of US employment benefits, click here. US Export Controls: This position has access to technologies or data subject to U.S. export control regulations. Under these laws, the release or transfer of export-controlled items or information to individuals who are not classified as "U.S. persons" (as defined by Immigration & Nationality Act) may require prior authorization from the U.S. government. We may require additional documentation related to national identity to determine whether an export compliance license is required for any export-controlled items. This information is requested solely for the purpose of complying with U.S. export control laws and will not be used for other purposes. Learn more about export compliance here. Why work at Impinj: Know you're making a difference. Competitive benefits. Support for remote work or a desk with a view. Weekly Q&A sessions with our executive team. Impinj provides an environment that fosters openness and innovation and is developing technology that delivers a positive impact on the world. Collaboration and teamwork are highly valued, and accomplishments are duly celebrated. We have an open paid time-off policy paired with a respect for work/life balance. Our headquarters is located in Seattle with spectacular views of the Olympics, Lake Union, and Mt Baker, which can be enjoyed from our rooftop deck. Our Brazilian site is in Porto Alegre, Rio Grande do Sul state, at "Tecnopuc," a technology park that offers a very nice workplace for the development of groundbreaking technologies. Impinj is committed to creating a diverse and inclusive work environment and welcomes applicants from all backgrounds. We are an equal opportunity employer and do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.

Job Description At MacDonald-Miller Facility Solutions (“MacMiller”) as the Northwest’s leading mechanical contracting firm, we design, deliver and service HVAC, plumbing and automation system solutions for commercial buildings. With our over one thousand employees across 10 offices, there is a breadth and variety of work to keep you engaged and inspired. We enjoy a well-respected history of exceeding our customers’ expectations and . Our clients trust their toughest projects with our integrated teams, including: • New construction – Engineering, fabrication and install of mechanical systems for new projects following lean construction practices, • Special projects – Retrofits and mechanical repairs for existing buildings for new efficiencies, • Service - scheduled preventative maintenance ensuring tenant comfort, and 24/7 emergency response, • Building performance – Control systems, fault detection, energy services and remote monitoring, • Diverse players, one team, a common vision. Collaboration is our foundation and critical to the success of the company. Every team member is valued and brings a diversity of strengths to help us meet our common vision., • We are dedicated to personal and professional excellence. We execute with distinction by doing the right thing and following through on our commitments., • Everyone deserves a safe workplace. Safety is more than hardhats and boots, it’s an attitude and the environment we create. Every day, everyone goes home to their families., • We are proud to be part of MacDonald-Miller. We actively seek to build relationships and know each other as individuals. Together we create an environment that is welcoming, caring, and trusting., • We are committed to continuous, . Innovation is how we stay an industry leader. We always strive to challenge and better ourselves. Controls Engineer: This is where you come in. We’re looking for a Controls Engineer who will… • Read, analyze, and interpret plans, submittals, mechanical specifications, contract documents, and control drawings., • Perform hardware engineering, software engineering, and network-level commissioning for Building Automation Systems on both new construction and existing system retrofit projects., • Interpret project financials, and apply value engineering concepts to understand cost impacts., • Utilize existing practices and develop new processes to ensure cost-effective controls engineering, while consistently delivering excellent customer service and ensuring all work complies with state, local, and federal regulations., • Effectively communicate and present information to management, customers, and field operations teams. Your Background: What kind of person will thrive in this role? You should have… • Proficiency in Microsoft Office products, including Windows, Word, and Excel., • A Bachelor’s degree in Engineering or Industrial Automation & Controls (Mechanical or Electrical preferred), or an equivalent qualification from a two-year college or technical school., • 3-5 years of experience with AutoCAD, AutoCAD MEP, or similar design tools., • Experience with the installation and operation of commercial HVAC systems., • A hard worker with a strong work ethic., • Continuously learning to stay ahead of industry standards and evolving technologies., • Empowering yourself to learn and solve challenges independently. If you require constant guidance or a micro-managing boss, this may not be the right fit for you., • Thriving in a lean, results-driven environment where you’ll be expected to do more, take on more, and achieve more each year. Compensation: $80,000 to $105,000 Annually MacDonald-Miller Facility Solutions presently provides employee coverage for: • Medical, dental, vision for employees (coverage available for dependents for shared premium)., • 401k retirement plan including Company matching., • Vacation and Sick Compensation (PTO), and Holiday Pay!, • Disability income protection including short term and long-term disability., • Employee and dependent life insurance., • Wellness Program. Our Seattle HQ office (17930 International Blvd, SeaTac, WA 98188) has easy access to the SeaTac International Airport, ample secured parking, and newly renovated office facilities - not to mention great views! Neighborhood amenities include an onsite deli, restaurants, and convenient freeway/airport access. Interested in learning more? If you’re ready for an adventure and are interested in being considered for this role, click apply to start the conversation! Or if you know someone who currently works at MacDonald-Miller, reach out to them to get introduced to the team! MacDonald-Miller Facility Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job Description Title: Senior Electrical Engineer Location: Miami, New York, Los Angeles, Omaha. The Company will provide initial onboarding training in Omaha. Accommodation and food are paid for during the training in Omaha. A candidate willing to relocate to Omaha will obtain reimbursement for relocation expenses. Company: Schnackel Engineers, Inc. Key Responsibilities: • Coordinate with the client, the MEP/FP/IT design teams, and other consultants to ensure the design is consistent with the client’s vision, to identify and resolve areas of conflict, to ensure a fully coordinated interdisciplinary design, and to ensure the design schedule is maintained., • Participate in meetings and conference calls when necessary., • Use AutoCAD/Revit and other software to create electrical construction document packages which plans include electrical distribution equipment, devices, equipment connections, luminaires, controls, fire alarm initiating devices and notification appliances, all associated circuitry, appropriate schedules and details, one line / riser diagrams, and construction specifications., • Perform all required calculations to support design decisions, including load calculations, short-circuit calculations, and photometric calculations., • Coordinate with equipment vendors and manufacturer’s representatives for the selection and specification of appropriate equipment., • In possession of an ABET-accredited degree in Architectural Engineering with an emphasis on Electrical Engineering with a focus on power systems., • 3-5 or more years of electrical design experience with an MEP/FP engineering consultant., • In possession of Engineer-Intern (EI) credentials in Electrical Engineering., • Able and willing to obtain, Professional Engineer (PE) credentials in Electrical Engineering or with a PE diploma, • Exceptional communication and organization skills, including prioritizing tasks and multitasking., • Advanced proficiency with NFPA 70 (National Electrical Code) and NFPA 72 (National Fire Alarm & Signaling Code)., • Ability to work independently and efficiently upon receiving necessary direction and information., • Experience designing lighting and lighting control systems, laying out and circuiting receptacles, designing connections to mechanical equipment and other equipment specified by the architects, designing emergency power systems, developing panel schedules, designing one-line / riser diagrams, and designing fire alarm systems. Why Join Schnackel Engineers, Inc? • To be part of a mid-sized company that values quality, efficiency, and clear communication. Compensation and benefits • Competitive market-level salary, • Medical, dental, and vision insurance, • Ten PTO days, • Nine paid holidays, • Sick pay, • W-2 employment, • 401K matching contribution offering, • Voluntary HSA account, • Biweekly salary, • Quarterly bonuses subject to the performance of the team, • Education assistance, • Life insurance policy offerings (voluntary), • Disability insurance, • Additional voluntary insurance policy options

Job Description🚀 Join the Future of Commerce with Whatnot! Whatnot is the largest live shopping platform in North America and Europe to buy, sell, and discover the things you love. We’re re-defining e-commerce by blending community, shopping, and entertainment into a community just for you. As a remote co-located team, we’re inspired by innovation and anchored in our values. With hubs in the US, UK, Germany, Ireland, and Poland, we’re building the future of online marketplaces –together. From fashion, beauty, and electronics to collectibles like trading cards, comic books, and even live plants, our live auctions have something for everyone. And we’re just getting started! As one of the fastest growing marketplaces, we’re looking for bold, forward-thinking problem solvers across all functional areas. Check out the latest Whatnot updates on our news and engineering blogs and join us as we enable anyone to turn their passion into a business, and bring people together through commerce. 💻 Role You will work in cross-functional, multidisciplinary teams, allowing you to directly shape the security and integrity of our user account systems. Your goal will be to minimize risk and potential abuse by ensuring robust authentication, authorization, and access controls across our environment. You will empower other teams to move fast without compromising user trust by delivering secure-by-default infrastructure, scalable permissioning systems, and reliable storage for sensitive user data. Your designs, code, and ideas will contribute to solving some of the most complex technical challenges we face today and help define future engineering initiatives. Some sample projects you might work on are: * Authentication * Authorization * Permissions * Access control systems across the environment * Building a secure storage for PII user data Team members in this role are required to be within commuting distance of our San Francisco, Los Angeles, Seattle, or New York hubs. 👋 You Curious about who thrives at Whatnot? We’ve found that embodying a low ego, growth mindset, and high-impact drive goes a long way here. As our next Software Engineer, you should have 5+ years of infrastructure engineering experience, building scalable systems that can handle millions of users, plus: * Experience with large distributed systems handling substantial traffic * Previous experience at a hyper-growth startup. You’re a self-starter who can hit the ground running with little direction. * Self-driven with result-oriented mindset * Excellent communication and writing skills. * Exceptional coding skills and the ability to ship new products lightning-fast. We primarily use Python, Elixir, JavaScript, but previous knowledge of each is not required. * Knowledge in areas like cryptography, networking, authentication, and authorization is crucial. * Experience in implementing security measures such as encryption, access controls, data minimization, and regular audits to safeguard PII. * Nice to have a prior experience in a public cloud environment (AWS, GCP) using Kubernetes, Docker, and/or Terraform. * Nice to have a startup experience at high-growth companies. 🎁 Benefits * Generous Holiday and Time off Policy * Health Insurance options including Medical, Dental, Vision * Work From Home Support * Home office setup allowance * Monthly allowance for cell phone and internet * Care benefits * Monthly allowance for wellness * Annual allowance towards Childcare * Lifetime benefit for family planning, such as adoption or fertility expenses * Retirement; 401k offering for Traditional and Roth accounts in the US (employer match up to 4% of base salary) and Pension plans internationally * Monthly allowance to dogfood the app * All Whatnauts are expected to develop a deep understanding of our product. We're passionate about building the best user experience, and all employees are expected to use Whatnot as both a buyer and a seller as part of their job (our dogfooding budget makes this fun and easy!). * Parental Leave * 16 weeks of paid parental leave + one month gradual return to work *company leave allowances run concurrently with country leave requirements which take precedence. Please find our Whatnot Candidate Privacy Notice here. 💛 EOE Whatnot is proud to be an Equal Opportunity Employer. We value diversity, and we do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, parental status, disability status, or any other status protected by local law. We believe that our work is better and our company culture is improved when we encourage, support, and respect the different skills and experiences represented within our workforce. Compensation Range: $230K - $260K

Job Description The Carbon Robotics LaserWeeder™ leverages advanced robotics, computer vision, AI/deep learning, and lasers to eliminate weeds with sub-millimeter accuracy—all without herbicides. This innovative solution reduces environmental impact, promotes soil health, and helps farmers address labor shortages and rising costs. Designed in Seattle and built at our cutting-edge manufacturing facility in Richland, Washington, the LaserWeeder is setting a new standard for automated weed control. With $157 million in funding from prominent investors such as BOND, NVentures (NVIDIA's venture arm), Anthos Capital, Fuse Venture Capital, Ignition Partners, Revolution, Sozo Ventures, and Voyager Capital, Carbon Robotics is driving innovation. As a no-nonsense team with a bias for action, we take pride in executing our ideas. Whether it's designing transformative technology or visiting farms to ensure our products are reliable and safe, we do whatever it takes to deliver for our customers. Working here means tackling big problems with big impact. You'll find opportunities to grow professionally, solve complex challenges, and make meaningful contributions to a mission that matters. At Carbon Robotics, we trust our team to act independently and make practical, real-world decisions. Join us as we innovate, execute, and build the future of farming together. YouTube | X | Instagram | LinkedIn | News As a Sr. Software Engineer, Embedded Systems at Carbon Robotics you will work alongside your software, mechanical and electrical peers to build AI and robotics products. You will play a crucial role in designing, developing, and maintaining embedded software systems for various electronic devices. You will work closely with hardware engineers and other cross-functional teams to ensure seamless integration of software and hardware components. You'll do whatever it takes - which might include going to the farm - to ensure our customers have reliable and safe products. What you'll do: • Partner with Engineering teams to build firmware on embedded systems for LaserWeeding solution and future products., • Develop and troubleshoot firmware running on various microcontroller platforms., • Help design and establish the manufacturing and validation methods for PCBs and related sub-components., • Investigate control problems at the lowest level and learn how to properly tune them., • Worked as a Software Engineer with embedded systems in C for 5+ years., • Solid experience with designing and implementing reliable, consistent, and fast motor control systems., • Knowledge of scripting languages such as Python or Shell scripting., • Strong understanding of embedded systems architecture, including microcontrollers, sensors, and communication interfaces (e.g., UART, SPI, I2C)., • Experience with real-time operating systems (RTOS) such as Zephyr or FreeRTOS., • Proficiency in debugging tools, such as JTAG, oscilloscopes, and logic analyzers., • Familiarity with software development tools and version control systems (e.g., Git, SVN)., • Effective verbal and written communication skills and a desire to work in multidisciplinary teams, • BS+ in Computer Science, Computer Engineering or related field Carbon Robotics follows equitable hiring practices. Flexibility in our hiring process allows hiring of talent at levels different from what are posted. The compensation range outlined is based on a target budgeted base salary. Individual base pay depends on various factors such as relevant experience and skill, Interview assessments and responsibility of role, job duties/requirements. Offers are determined using our equitable hiring practices. Carbon Robotics offers additional compensation in the form of benefits premiums, pre-IPO stock options and On Target Earning commissions for appropriate positions. Base pay ranges are reviewed each year. We are committed to the principle of pay equity – paying employees equitably for similar work. Offers are dependent on someone experience and may be outside of the published range when appropriate. If your skills are above the posted range... Apply! We want to hear from you! Carbon Robotics' base salary pay range:$180,000—$200,000 USD Why would you join Carbon Robotics? Passion for building teams capable of solving uniquely interesting problems. Innovation while disrupting the market is what we do. Profiled in WSJ and Forbes, Carbon Robotics is poised to become the next billion dollar company in the rapidly growing worldwide Ag-Tech industry. We offer competitive compensation and benefits to our full time US based* employees, including: • Competitive salaries, • Pre-IPO Stock Options, • Generous Benefits:, • Fully-paid medical, dental, and vision insurance premiums for you and all dependents, • Choice of PPO or HDHP/HSA, • Virtual Care - Doctor on Demand, • Employee Assistance Program, • Mental Health HRA, • Restricted Healthcare Travel support, • Menopause Support, • Life Insurance, • Long Term Disability, • Flexible PTO, • 401(k) plan, • Pet Insurance, • Commuter Benefits Carbon Robotics is building a culture of diversity and inclusion for all. We welcome everyone's voice and believe in open and transparent communication. We believe the best products, services, and companies are built by strong teams that include a diversity of backgrounds, perspectives, ideas, and experiences. We are committed to supporting and enabling growth and opportunity for every employee at every level. This is the foundation to which we will build a truly unique environment. We are equally committed to equal employment opportunity, and it is foundational to how we recruit and hire our talented team. Employment is determined based upon capabilities and qualifications without discrimination on the basis of race, creed, color, religion, sex, gender identification and expression, marital status, military status or status as an honorably discharge/veteran, pregnancy (including potential pregnancy, pregnancy-related conditions, and childbearing), sexual orientation, age (40 and over), national origin, ancestry, citizenship or immigration status, physical, mental, or sensory disability , HIV/AIDS or hepatitis C status, genetic information, status as an actual or perceived victim of domestic violence, sexual assault, or stalking, or any other protected class as established by law. #talentacquisition #laserweeding #laserweeder #weedcontrol #agtech #agtechnology #farmtech #robotics #lasers #lasersandrobots #missiondriven #AI #startup #wearehiring #computervision #machinelearning #carbonrobotics

Job Description The Carbon Robotics LaserWeeder™ leverages advanced robotics, computer vision, AI/deep learning, and lasers to eliminate weeds with sub-millimeter accuracy—all without herbicides. This innovative solution reduces environmental impact, promotes soil health, and helps farmers address labor shortages and rising costs. Designed in Seattle and built at our cutting-edge manufacturing facility in Richland, Washington, the LaserWeeder is setting a new standard for automated weed control. With $157 million in funding from prominent investors such as BOND, NVentures (NVIDIA's venture arm), Anthos Capital, Fuse Venture Capital, Ignition Partners, Revolution, Sozo Ventures, and Voyager Capital, Carbon Robotics is driving innovation. As a no-nonsense team with a bias for action, we take pride in executing our ideas. Whether it's designing transformative technology or visiting farms to ensure our products are reliable and safe, we do whatever it takes to deliver for our customers. Working here means tackling big problems with big impact. You'll find opportunities to grow professionally, solve complex challenges, and make meaningful contributions to a mission that matters. At Carbon Robotics, we trust our team to act independently and make practical, real-world decisions. Join us as we innovate, execute, and build the future of farming together. YouTube | X | Instagram | LinkedIn | News As Sr. Electrical Engineer, Vehicle Power Distribution at Carbon Robotics, you will architect, design, test, and deliver the complete electrical power system for our diesel-electric tractor platform. You'll design high-voltage distribution networks, battery management systems, and safety interlocks that seamlessly integrate diesel generation with electric propulsion. From developing robust power architectures to validating performance in harsh farm environments, you'll do whatever it takes - which might include going to the farm - to ensure our customers have reliable and safe products. What you'll do: • Design high-voltage (400-800V DC) and low-voltage (12/24V) power distribution architectures for diesel-electric platforms, • Develop power management strategies to optimize energy flow between diesel generator and vehicle loads, • Create electrical distribution systems including bus bars, contactors, fuses, and circuit protection for vehicle-scale power, • Implement safety systems including ground fault detection, isolation monitoring, and emergency shutdown circuits, • Integrate power distribution with vehicle CAN networks for real-time monitoring and diagnostics, • Develop wiring harnesses rated for high-current automotive applications with proper shielding and routing, • 8-15 years experience designing vehicle power distribution systems for EVs, hybrids, or heavy, high voltage equipment, • Expert proficiency in Capital Harness (or similar) for wiring design as well as analytical design optimization tools, • Expertise in high-voltage DC systems design, isolation requirements, and safety standards (ECE R100, ISO 6469), • Proficiency in automotive wiring standards, connector systems, and harness design for high-power applications, • Deep understanding of circuit protection devices (contactors, fuses, solid state power controls/relays, pre-charge circuits, pyro-fuses) for vehicle applications, • Experience with thermal analysis and cooling system integration for power electronics, • Knowledge of agricultural/automotive equipment requirements including IP67 sealing, thermal environments, vibration resistance, and EMC compliance, • Familiarity with J1939 protocols and agricultural ISOBUS standards, • Understanding of manufacturing processes, component selection, and cost optimization, • Desired proficiency with Altium Designer (v18+), • Willingness to travel ~10% of the time to support products in the production & field environments with a demonstrated ability to work directly with internal and external stakeholders/customers Passion for building teams capable of solving uniquely interesting problems. Innovation while disrupting the market is what we do. Profiled in WSJ and Forbes, Carbon Robotics is poised to become the next billion dollar company in the rapidly growing worldwide Ag-Tech industry. We offer competitive compensation and benefits to our full time US based* employees, including: • Competitive salaries, • Pre-IPO Stock Options, • Generous Benefits:, • Fully-paid medical, dental, and vision insurance premiums for you and all dependents, • Choice of PPO or HDHP/HSA, • Virtual Care - Doctor on Demand, • Employee Assistance Program, • Mental Health HRA, • Restricted Healthcare Travel support, • Menopause Support, • Life Insurance, • Long Term Disability, • Flexible PTO, • 401(k) plan, • Pet Insurance, • Commuter Benefits Carbon Robotics is building a culture of diversity and inclusion for all. We welcome everyone's voice and believe in open and transparent communication. We believe the best products, services, and companies are built by strong teams that include a diversity of backgrounds, perspectives, ideas, and experiences. We are committed to supporting and enabling growth and opportunity for every employee at every level. This is the foundation to which we will build a truly unique environment. We are equally committed to equal employment opportunity, and it is foundational to how we recruit and hire our talented team. Employment is determined based upon capabilities and qualifications without discrimination on the basis of race, creed, color, religion, sex, gender identification and expression, marital status, military status or status as an honorably discharge/veteran, pregnancy (including potential pregnancy, pregnancy-related conditions, and childbearing), sexual orientation, age (40 and over), national origin, ancestry, citizenship or immigration status, physical, mental, or sensory disability , HIV/AIDS or hepatitis C status, genetic information, status as an actual or perceived victim of domestic violence, sexual assault, or stalking, or any other protected class as established by law. #talentacquisition #laserweeding #laserweeder #weedcontrol #agtech #agtechnology #farmtech #robotics #lasers #lasersandrobots #missiondriven #AI #startup #wearehiring #computervision #machinelearning #carbonrobotics

Job Description At Sage Bionetworks, we believe in the power of open science and interdisciplinary collaboration to create a new vision of human health. We strive for actionable biomedical insights through the responsible sharing and reuse of data, all guided by our deep scientific expertise and diligent governance controls. We're a dynamic, adaptable team, and at Sage, we highly value individuals who can flexibly navigate various roles and functions. Diversity in experiences, backgrounds, and identities is essential for our rich culture of learning and collaboration. Our partnerships, both within Sage and with external communities, are founded on principles of trust, transparency, and a commitment to growth. Together, we are leaving a lasting imprint on the fields of science and medicine. We are hiring a Backend Software Engineer to join our technology team at Sage Bionetworks. Our engineers build the secure, scalable, and high-performance services that power open and collaborative science. From Synapse.org to our research portals and other applications in the Sage ecosystem, the tools you create will enable researchers and communities worldwide to share data, generate insights, and accelerate biomedical discoveries. Job Summary: As a Principal Backend Research Software Engineer, you will leverage your expertise to lead the design, prototyping, and development of core infrastructure and user-facing features across Sage Bionetworks’ platforms. Working with full autonomy, you’ll drive architectural decisions that ensure our systems are secure, scalable, and extensible, while directly influencing product functionality and user experience. You’ll also have the opportunity to explore emerging technologies in cloud services, data science, and AI/ML, shaping the future of our platforms in support of open science and accelerating biomedical discovery. Key Responsibilities: * Software Development: Lead the development of cutting-edge applications using programming languages and tools to create functional and efficient software. * Requirement Analysis: Analyze user requirements to develop robust and efficient software solutions. * Testing and Debugging: Lead and oversee unit, integration, and debugging tests to ensure software quality. * Collaboration: Collaborate closely with product managers, designers, and QA teams to ensure software meets user requirements. * Maintenance: Oversee the updating and maintenance of existing software to enhance functionality and fix issues. * Documentation: Document the software development process, including code and technical specifications. * Tool Development: Lead and innovate the development of tools for data tracking, scalability, and reproducibility in scientific collaborations. * Product Improvement: Collaborate with scientists and developers to drive improvements in products like Synapse and other integrations. * Technical Documentation: Provide comprehensive technical documentation to support users and developers. * Community Engagement: Participate and lead in external groups and communities to stay informed on best practices. * Code Reviews: Conduct and lead code reviews, providing strategic feedback to improve code quality. * Tool Reliability: Use advanced packages and frameworks to build reliable tools for biomedical data interaction. * Lifecycle Participation: Participate in and lead the software development life cycle, including requirements analysis and design. * Mentorship: Mentor and develop junior developers by performing code reviews and setting coding standards. * Technology Trends: Stay aware of technological trends and advancements, recommending strategic product enhancements. We’d Love to Hear from You If You: * A BS or MS in Computer Science, Bioinformatics, Software Engineering, or a related field, or equivalent training. * 8+ years of professional software development experience. * Strong Java programming skills, plus experience with another modern backend language (e.g., Python, TypeScript/Node.js) and a willingness to learn. * Experience building, deploying, and supporting software in production environments. * Expertise with collaborative development and version control systems (e.g., Git). * Practical experience with software development lifecycles and agile methodologies. * Familiarity with software development tools such as IDEs (Eclipse), Jira, Maven, GitHub, etc. * Commitment to test-driven development, continuous integration (CI), continuous deployment (CD), and rapid, automated release cycles. * Strong verbal, written, and organizational skills, with the ability to multitask and thrive in a dynamic environment. * Curiosity to explore new tools and frameworks and contribute ideas that advance our technology. * Interest in AI/ML-driven applications, data science workflows, or large-scale data platforms. * Passion for open science and building technology that supports global research communities. * Working knowledge of SQL and relational databases. * Comfortable working in cloud-based IT or HPC/cluster environments. * Experience working with biomedical data (genomic, imaging, or clinical). * Expert experience with containerization technologies (Docker, Singularity). Preferred but Not Required: * Experience with cloud-native development and orchestration tools such as Kubernetes. * Familiarity with modern backend frameworks like Spring Boot, FastAPI, or Node.js/Express. * Knowledge of infrastructure-as-code tools (Terraform, AWS CDK, CloudFormation). * Experience building scientific, data-driven, or scholarly products. * Comfort applying agile/iterative practices to research-driven projects. Job Functions and Physical Requirements The following cognitive and physical activities outline the essential functions required for successful job performance. Reasonable accommodations may be provided to enable individuals with disabilities to fulfill these functions. Physical Demands * Extended periods of sitting at a desk and using a computer. * Repeated wrist, hand, and finger movements. * Requires clear vision for tasks like data analysis, transcribing, computer use, and reading. * Occasionally lifting or moving objects weighing up to 10 pounds. Cognitive Demands * Able to work effectively under deadlines. * Strong problem-solving and analytical skills. * Attention to detail and accuracy. * Flexibility to adapt to changing environments, priorities and multitask. Additional Requirements * Travel is required a minimum of two times per year for on-site events in Seattle, WA. * Effective verbal and written communication skills. * Works well in a team and maintains professionalism. * Follows company policies, procedures, and relevant laws and regulations. Note: This list is not exhaustive and may be subject to modification as job duties evolve. About Us Sage Bionetworks is a nonprofit biomedical research organization that was founded in Seattle in 2009. We focus on advancing human health through open science practices and radical collaboration, with a view to breaking down existing silos in science and technology. Through our work, we guide responsible data sharing and reuse, benchmark scientific methods and results, and empower participants to be active partners in research. We are a bold team of scientists, engineers, product developers, governance specialists and business experts, working to bring data and communities together in unique ways that accelerate medical progress. As a growing organization, Sage is supported through a dynamic portfolio of competitive research grants, commercial partnerships, and philanthropic contributions. Sage Bionetworks is pleased to offer a comprehensive benefit package, competitive to both commercial and not-for-profit life science organizations. The plan includes: health, dental, vision, life, AD&D and long term disability benefits; paid time off; a retirement plan; flexible spending accounts; a shared incentives plan, voluntary long term care insurance, and other voluntary products. Additional information can found here: Benefits – Sage Bionetworks. At Sage Bionetworks, we implement equitable workplace strategies to guarantee fair compensation. Actual compensation is determined based on current market data, experience, and internal pay parity. This position is classified as a Sage Principal, Advisory level position, with a hiring salary range of $124,900 to $169,230. New hires typically receive an offer between the minimum and midpoint of the range, although higher offers may be considered based on experience and market conditions. We have a distributed workforce and support remote and/or on-site hybrid work arrangements within the United States. All interviews will be conducted virtually unless otherwise communicated. At Sage Bionetworks, we uphold equal employment opportunities for all employees and applicants without bias to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, marital status, or veteran status. We strictly prohibit discrimination and harassment based on these protected categories, in compliance with federal and state equal employment opportunity laws.

Job Description Under general supervision and reporting to the Senior Director of Quality Operations, The Quality Engineer is responsible for executing and expanding on key initiatives inside of the supplier quality organization, including the execution of various supplier quality engineering related activities such as Compliance, Process and Product Audits, MRB, FAI Witnessing, Review and Sign off, Problem Solving, Corrective and Preventive Actions, Supplier Performance Reporting and other Quality Improvement Activities. Job Responsibilities: • Conducts activities to modify, apply, and maintain quality evaluation, control systems and protocol, • Provides explanations of testing and inspection plans, methods and/or technologies to assure reliability and conformance of products and processes, • Provides analysis and develops recommendations for corrective actions for nonconformities and/or design problems for internally produced products and processes, • Utilizes PPAP core elements (e.g., PFMEA, MSA, Process Flow and Control Plans, etc.) to identify risk in product development and propose risk management solutions, • Provides reviews and ensure requirements are met for work transfer and process change management, • including Resourcing Gate and Production Part Approval Process (PPAP) acceptance, • Reviews process control documentation to ensure it is in compliance with requirements, objectives, and/or contracts, • Develops, modifies, applies, and maintains quality evaluation, control systems and protocols for materials being processed into partially finished or finished products, • Working with product design and specification, devises testing plans, methods, and equipment to assure reliability of product. Collaborates internally to ensure quality standards are in effect, • Develops proactive quality initiative strategies and drives their implementation, • Designs and implements product engineering changes to satisfy quality issues raised by customers, • Responsible for both Program and Product Quality Engineering, • Responsible for development of new inspection technologies or methodologies to assure product conformance, • Strong verbal, written and communication skills, • Project management, time management, problem solving and organization, • Fluent English – reading and writing is required, • Professionalism, integrity, and exceptional attention to detail, • Strong independent decision-making skills; excellent analytical skills and professional judgment, • Establish and maintain effective working relationships, • Fluent English – reading and writing is required, • Pass pre-hire background check including DMV and credit screening, • FAA, EAR, and ITAR standards and regulations, • Engineering Processes, Standard Drawings Conventions, Interpreting Drawing, Specifications, and GD&T, • MS OfficeAdditional requirements, • Bachelor’s degree and 2 years of prior relevant experience OR, in absence of a degree, 6 years of relevant experience required, • Engineering/other technical positions: Bachelor’s degree (typically in Science, Technology,, • Engineering or Mathematics, and a minimum of 2 years of prior relevant experience, • Must be a U.S. citizen BENEFITS: • 12 days paid vacation first year, increasing with service years, • 10 days paid sick time, • 11 paid holidays, • Healthcare insurance available: Medical, dental, vision, STD, LTD, critical illness, life insurance for self and dependents, • Champ Plan Wellness and Health, • Free to employees working minimum 20 hours/week with anticipated $30k/annual earnings, • Participation increases net take home pay $$$ in most instances, • Free wellness initiatives, • Free tele-health, • Free and discounted RX, • Auto enrollment (unless tax elections result in negative impact), • Eligible on the 1st of the month following 30 days of continuous employment, • requires monthly 10-minute wellness activity participation, • 401k retirement savings with match, • Eligible on the first (1st) of the month following 90 days of continuous employment, • 100% match of 1st 3% contribution, • 50% match of next 2% contribution, • IMMEDIATE VESTING, • Company-provided cell phone, laptop, mobile wi-fi (for business use only), • Regular Hourly rate for travel time, • Direct Pay Travel arrangements for flights, hotels and rental cars, • Travel Reimbursements direct deposited with each payroll, • Federal rate Mileage reimbursement (.70/mile 2025) when driving personal vehicles on company business, • Per diem reimbursements for meals and incidentals, • Overnight trips - Up to $75, • Leaving home after 4 pm $40, • Federal rate mileage reimbursement (.70/mile 2025) when driving personal vehicles on company business, • Direct Pay Travel arrangements for flights, hotels and rental cars, • Travel Reimbursements direct deposited with each payroll, • Per diem reimbursements for meals and incidentals, • Overnight trips - Up to $75, • Leaving home after 4 pm $40, • $1500 EMPLOYEE REFERRAL BONUS, • Initial $750 paid upon hire of qualified referred employee (rehires excluded) $33.00-$55.00 per hour eligible for overtime, please note that the salary information is a general guideline only. Trigo ADR considers factors such as (but not limited to) scope and responsibilities of the position, candidate’s work experience, education/training, key skills, internal peer equity, as well as market and business considerations when extending an offer. Company Overview TRIGO ADR Americas is the leader in the Aerospace & Defense Industry providing global Supplier Delivery Assurance, Supplier Development and Quality Management Services. Trigo provides a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Trigo’s team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results. TRIGO ADR Americas is an Equal Opportunity Employer, including disabled and veterans, and may require US Citizenship for employment on certain defense contracts subject to ITAR restrictions. All qualified candidates will receive consideration. Except where otherwise provided by law, selection will be made without regard to, and there will be no discrimination because of race, religion, color, national origin, sex, political affiliations, marital status, non-disqualifying physical or mental disability, age, sexual orientation, gender identity, genetic information, membership or non-membership in an employee organization, or on the basis of personal favoritism or other non-merit factors. . Powered by JazzHR 1DBqODvM0Y

Job Description The Kestra team has over 400 years of experience in the external and internal cardiac medical device markets. The company was founded in 2014 by industry leaders inspired by the opportunity to unite modern wearable technologies with proven device therapies. Kestra’s solutions combine high quality and technical performance with a wearable design that provides the greatest regard for patient comfort and dignity. Innovating versatile new ways to deliver care, Kestra is helping patients and their care teams harmoniously monitor, manage, and protect life. The Senior Supplier Quality Engineer is responsible for working with our development team and external suppliers to deliver high quality, life-saving products; from development, through the life of the product. Manages all aspects of tier one and sub-tier supplier quality activities for assigned suppliers/ commodities; drives quality and process improvement at assigned suppliers/commodities. Assesses, monitors, and ensures the continued adequacy and effectiveness of the quality system for the assigned supplier base. Supports supplier selection, supplier process validation/controls, general supplier development. Reviews and approves inspection sampling plans for selection parts. ESSENTIAL DUTIES • Leads new and existing supplier audits, selection, development, and supports supply chain team strategies, • Participates in design reviews with development teams and suppliers to ensure manufacturable designs and, • definition of critical-to-quality/process/function parameters for critical components/sub-systems, • Manages supplier part/assembly qualifications using PFMEA/AQPQ/PPAP techniques, • Manages supplier process validation plans, and reports using IQ/OQ/PQ validation techniques, • Approves supplier test and inspection plans and procedures to ensure quality at the source, • Maintains supplier key performance indicators (KPIs) to support supplier score cards, and drive, • improvements., • Drives supplier quality MRB dispositions, root cause determination, and 8D corrective actions/supplier, • corrective action requests (SCAR), • Utilizes six-sigma and lean manufacturing techniques to lead continuous improvement of supplier, • performance working with supply chain and development teams, • Acts as supplier primary technical contact working both independently and in teams to support company, • objectives, • Maintains 100% compliance to Kestra Medical Quality Management System, • Responsible for technical project management of supplier Audit, PPAP, SCAR, and other deliverables to meet, • internal deadlines, and achieve objectives COMPETENCIES • Passion: Contagious excitement about the company – sense of urgency. Commitment to continuous, • improvement, • Integrity: Commitment, accountability, and dedication to the highest ethical standards, • Collaboration/Teamwork: Inclusion of Team Member regardless of geography, position, and product or, • service, • Action/Results: High energy, decisive planning, timely execution, • Innovation: Generation of new ideas from original thinking, • Customer Focus: Exceed customer expectations, quality of products, services, and experience always present, • of mind, • Emotional Intelligence: Recognizes, understands, manages one’s own emotions and is able to influence, • others. A critical skill for pressure situations, • Ability to be a self-starter, seek new and better methods, and work with minimum supervision, • Capability to discern relevant facts and in turn, effectively resolve issues by making good decisions, • (compliance, quality, integrity, ethics, and critical thinking ability), • Ability to be flexible in a fast-paced goal-oriented environment, • Demonstrates the understanding of deadlines and time limits, ability to accomplish goals, and the desire to QUALIFICATIONS Education/Experience Required: • Bachelor's degree in electrical engineering or material science, technical science or equivalent combination of, • education and directly relevant experience, • 8+ years’ directly relevant experience, with prior experience in a FDA/cGMP or regulated environment, • Working knowledge of PPAP and IQ/OQ/PQ validation techniques, • Strong written and verbal communication skills, • Direct experience as a Manufacturing Engineer, Test Engineer, or Supplier Quality Engineer with the assigned, • commodities, • High level Excel or other statistical software skills for data analysis, problem solving and reporting, • Deep expertise in high-level quality systems best practices Preferred: • 8+ years of experience in FDA/regulated environment, • Team leadership and project management experience, • Contract manufacturing support/ PCBA manufacturing support, • Experienced with six-sigma and lean manufacturing techniques, • Direct experience working with injection molding, plastic film welding/bonding, over-molded cables, and/or, • Wire harness assembly, • Ability to translate quality improvements to cost savings, • Certified quality auditor SUPERVISORY RESPONSIBILITIES: None WORK ENVIRONMENT: • Indoor open office environment, • Minimal noise volume typical to an office environment, • Extended/overtime hours when needed, • Kestra manufactures and provides life-saving products regulated by the Federal Food and Drug, • Administration and under contract with Medicare. Kestra maintains a drug free workplace and testing is a, • condition of employment. PHYSICAL DEMANDS • Frequent repetitive motions that may include wrists, hands and/or fingers, such as keyboard and mouse, • usage, • Frequent stationary position, often standing or sitting for prolonged periods of time, • Frequent computer use, • Frequent phone and other business machine use, • Occasional lifting required, up to 20 pounds TRAVEL Frequent travel is required, 10-15% OTHER DUTIES: This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the Team Member. Duties, responsibilities, and activities may change or new ones may be assigned at any time with or without notice. Benefits Kestra offers a very competitive benefit package including Medical, Dental, 401K with Match, etc. Pay equity is an important part of Kestra’s Culture. Our compensation ranges are guided by national and local salary surveys and take into consideration experience level and internal equity. Each role is benchmarked based on the job description provided If your qualifications and/or experience level are outside of the posted position, we encourage you to apply as we are growing fast and roles that are coming soon may not be posted. Salary: Annualized at $140,000 - $150,000, plus bonus. Depending on experience. Kestra Medical Technologies is an equal opportunity employer. Kestra Medical Technologies does not discriminate on the basis of race, color, religion, national origin, veteran status, age, sexual orientation, gender identity and/or expression, marital status, disability, physical or mental status or any other characteristic protected by law. We are unable to sponsor or take over sponsorship of employment visas at this time. Applicants must be eligible to work for any employer in the U.S. Kestra manufactures and provides life-saving products regulated by the Federal Food and Drug Administration and under contract with Medicare. Kestra maintains a drug free workplace and testing is a condition of employment.

Job Description Impinj is a leading RAIN RFID provider and Internet of Things pioneer. We're inventing ways to connect every thing to the Internet — including retail apparel, retail general merchandise, healthcare items, automobile parts, airline baggage, food and much more. With more than 100 billion items connected to date, and multiple Fortune 500 enterprises around the world using our platform, we solve for a better understanding of our world. If it's a thing, we're working to connect it. Join Impinj and help us realize our vision of a boundless IoT— connecting trillions of everyday items to the Internet. Team Overview: We are seeking a talented and experienced Staff Analog IC Design Engineer to join our team focused on the development of next-generation RFID tag integrated circuits. In this role, you will contribute to the design and optimization of ultra-low-power analog and mixed-signal circuits used in passive and active RFID systems. What You Will Do: • Own the design of analog and mixed-signal blocks such as rectifiers, regulators, oscillators, ADCs, comparators, and analog front-ends for RFID tags, while understanding system-level analysis and trade-offs in collaboration with digital, RF, and verification teams, • Drive transistor-level design, simulation, layout supervision, and post-layout verification (PEX/LVS/DRC), • Ensure successful silicon implementation by validating analog IP in the lab—owning hands-on debugging, characterization, and issue resolution as needed to confirm that designs meet performance expectations in hardware, • Own and create design reviews and design documentation, and support tape out processes, • Collaborate effectively on designs with peers, leads, and management; communicate effectively and clearly about relevant technical challenges and progressWhat You Will Bring:, • Bachelor's degree in engineering with 8+ years of hands-on experience in analog/mixed-signal IC design, preferably in low-power and energy-harvesting applications; Master's or PhD in engineering preferred, • High Proficient with industry-standard EDA tools (e.g., Cadence Virtuoso, Spectre, LSF, SVN, Siemens Calibre, etc.), • Strong understanding of analog, RF, and mixed-signal IC design and verification fundamentals including transistor theories (e.g. doping, gate oxide thickness, sub-threshold operation, gain, linearity, noise, matching, stability, etc.), • Understanding debug and characterization, and layout-aware IC design., • Effective communication and collaboration skills with peers and management, • Experience with lab equipment (oscilloscope, VNA, etc.) for silicon validation and debug, • Preferred skill in ultra-low-power design techniques, • Familiarity with digital-analog co-design and mixed-signal verification The typical base pay range for this role across the US is $136,000 - $204,000. Individual base pay depends on various factors such as complexity and responsibility of role, job duties, requirements, and relevant experience and skills. Both market wage data and the mid-point of the pay range is reviewed and used as the starting point for all new hire offers. Offers are made within the base pay range applicable at the time. At Impinj certain roles are eligible for additional rewards, including merit increases, annual bonus and stock. These awards are allocated based on individual performance. In addition, certain roles also have the opportunity to earn sales incentives based on revenue or utilization, depending on the terms of the plan and the employee's role. US based employees have access to healthcare benefits; a 401(k) plan and company match among others. For a more comprehensive list of US employment benefits, click here. US Export Controls: This position has access to technologies or data subject to U.S. export control regulations. Under these laws, the release or transfer of export-controlled items or information to individuals who are not classified as "U.S. persons" (as defined by Immigration & Nationality Act) may require prior authorization from the U.S. government. We may require additional documentation related to national identity to determine whether an export compliance license is required for any export-controlled items. This information is requested solely for the purpose of complying with U.S. export control laws and will not be used for other purposes. Learn more about export compliance here. Why work at Impinj: Know you're making a difference. Competitive benefits. Support for remote work or a desk with a view. Weekly Q&A sessions with our executive team. Impinj provides an environment that fosters openness and innovation and is developing technology that delivers a positive impact on the world. Collaboration and teamwork are highly valued, and accomplishments are duly celebrated. We have an open paid time-off policy paired with a respect for work/life balance. Our headquarters is located in Seattle with spectacular views of the Olympics, Lake Union, and Mt Baker, which can be enjoyed from our rooftop deck. Our Brazilian site is in Porto Alegre, Rio Grande do Sul state, at "Tecnopuc," a technology park that offers a very nice workplace for the development of groundbreaking technologies. Impinj is committed to creating a diverse and inclusive work environment and welcomes applicants from all backgrounds. We are an equal opportunity employer and do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.

Job Description Job Title: Senior Software Engineer Department: LocPlatform Custom Revision Date: 9/19/25 FLSA: Exempt Location: Seattle, WA Preferred (Remote – OK) Level: T3 Rate of Pay: $127,000 -$150,000 USD Company Overview: Comtech Telecommunications Corp. is a leading global technology company providing terrestrial and wireless network solutions, next-generation 9-1-1 emergency services, satellite and space communications technologies, and cloud-native capabilities to commercial and government customers around the world. Our unique culture of innovation and employee empowerment unleashes a relentless passion for customer success. With multiple facilities located in technology corridors throughout the United States and around the world, Comtech leverages our global presence, technology leadership, and decades of experience to create the world’s most innovative communications solutions. For more information, please visit . Purpose: This Senior Software Engineer is a highly seasoned individual that works on complex development assignments and delivers solutions qualified for in-network/hosted Telecom product operation. Candidate is expected to have a firm grasp of system administration, network protocols, networking issues and solutions, system monitoring, configuration management, databases and cloud/containerized deployments. Candidates should be able to design solutions to facilitate product operation. The candidate may act as a member of quick-response deployment-support team and will often work under demanding deadlines, operating as a team member as well as independently to resolve complex problems. Candidate will be working in an agile environment where he/she is expected to carry out both development and testing. Responsibilities: • Work with other Design Engineers to plan, design and implement systems in a heterogeneous, distributed computing environment, • Cloud-native design/development of platform software components that include components that involve., • integration, configuration management and deployment automation of various software components for cloud/containerized deployments., • Development of middle-ware components that offer configuration management, monitoring etc. for applications., • VM/container image building., • System administration., • Setting up networking/routes/load balancing gears and troubleshooting network issues System monitoring., • Designing Backup/recovery solutions., • Designing Upgrade/rollback solutions., • Engineering solutions for integrating third-party Databases with high availability., • Provides leadership in enabling and enforcing security controls on VMs, servers, network, and cloud architectures and analyzes security issues and identify fixes based on vulnerability reports., • Implement solutions for high-availability for products to survive in mission-critical environments, • 10-15 years of Cloud-native Development or DevOps experience preferably in telecom industry, • Product development using OpenStack framework facilitating public/private cloud deployments, • Experience working with managed Kubernetes environments such as Amazon Elastic Kubernetes Service (EKS), Azure Kubernetes Service (AKS), • Experience with designing, building, effective management and monitoring of applications that are natively adapted to work in the cloud and on the Kubernetes platform, • Well-versed with Kubernetes control plane, • Design and manage containerized applications using Docker, • Infrastructure and deployment automation via Ansible, • Design and deploy high performance server applications with Node.js, • Unix/Linux (CentOS, Ubuntu, RedHat) system administration skills, • Networking skills with abilities to build, develop, maintain and performance-tune data networks on the systems developed, • Expertise with integrating load balancers/Ingress controllers into the solution, • Database (Postgres) configuration and management, • Well-versed with Message Queues such as Kafka and key-value stores like Redis, • Well-versed at integrating off-the-shelf third-party components and providing reliable and highly available solutions, • Network security and system security experience keeping up with mitigating vulnerabilities/CVEs, • Bash/Bourne shell scripting and standard Unix tools (sed, awk, Expect etc.), • Building, automating, and supporting distributed computing environments., • Agile development, • Familiarity with Managed K8s environments such as Red Hat OpenShift and VMware Tanzu OpenShift and Tanzu environments is a big plus, • AWS cloud development/deployment, • Experience with disaster recovery methods, • Source code management tools such as Perforce, Git, • Atlassian Tools (Jira, Confluence, Fisheye/Crucible), • Packer, • VM Ware deployment, • Python, • Kickstart/PXE Boot/Grub, • CFEngine, • Logical Volume Manager, • YUM Repositories, • SNMP

Job Description The Nuclear Company is the fastest growing startup in the nuclear and energy space creating a never-before-seen fleet-scale approach to building nuclear reactors. Through its design-once, build-many approach and coalition building across communities, regulators, and financial stakeholders, The Nuclear Company is committed to delivering safe and reliable electricity at the lowest cost, while catalyzing the nuclear industry toward rapid development in America and globally. About the role: We are seeking an exceptional and highly experienced Cybersecurity Engineer to join our growing team. This pivotal role will be responsible for designing, implementing, and maintaining advanced cybersecurity defenses across our IT and operational technology (OT) environments, ensuring the robust protection of our critical assets in a highly regulated industry. The Cybersecurity Engineer will serve as a technical leader and subject matter expert in cybersecurity, focusing on securing both corporate IT systems and the specialized operational technology (OT) environments vital to nuclear energy operations. This role will involve strategic planning, hands-on implementation, risk assessment, and ensuring compliance with stringent regulatory requirements. The successful candidate will drive the adoption of best practices, influence architectural decisions, and lead initiatives to strengthen our overall security posture against evolving threats. This role reports into the VP, Software Engineering. Responsibilities: Cybersecurity Architecture & Design: • Lead the design and implementation of secure architectures for both IT and OT systems, including network segmentation, access control, intrusion detection/prevention, and data protection., • Develop and implement security standards, policies, and guidelines tailored to the unique demands of the nuclear energy industry., • Conduct comprehensive cybersecurity risk assessments for IT and OT systems, identifying vulnerabilities and potential threats., • Develop and implement risk mitigation strategies and controls in accordance with industry best practices and regulatory requirements (e.g., NRC, NIST, IEC 62443)., • Contribute to the development and execution of cybersecurity incident response plans, ensuring rapid detection, containment, and recovery from security incidents., • Stay abreast of the latest cybersecurity threats, vulnerabilities, and attack vectors relevant to critical infrastructure and industrial control systems (ICS)., • Ensure strict compliance with all applicable cybersecurity regulations and standards pertinent to the nuclear energy industry (e.g., 10 CFR Part 73, NERC CIP, NIST CSF)., • Prepare for and support regulatory audits and inspections, providing technical expertise and documentation., • Specialize in securing industrial control systems (ICS), SCADA systems, distributed control systems (DCS), and other OT environments., • Implement security solutions that maintain the availability, integrity, and confidentiality of OT systems without disrupting critical operations., • Provide expert technical guidance and mentorship to junior cybersecurity engineers and cross-functional teams., • Lead complex security projects and initiatives, driving them to successful completion., • Bachelor's degree in computer science, Cybersecurity, or a related field. Master's degree preferred., • 7+ years of progressive experience in cybersecurity, with a strong focus on enterprise and operational technology (OT) security., • Minimum of 3+ years of direct experience in the nuclear energy industry or another highly regulated critical infrastructure sector (e.g., oil & gas, utilities, aerospace & defense)., • Deep expertise in cybersecurity frameworks (NIST CSF, ISO 27001), regulatory compliance (e.g., NRC, NERC CIP), and industry standards (e.g., IEC 62443)., • Proven experience in designing and implementing secure network architectures, access controls, and data protection mechanisms for complex environments., • Strong skills in application architecture, secure coding reviews, and threat Modeling., • Familiarity with modern development environments, containers, and CI/CD pipelines., • Deep understanding of cloud-native security challenges and solutions., • Experience with SAST/DAST/SCA- and other security testing tools, Knowledge of networking protocols such as HTTP, DNS, and TCP/IP, experience with Vulns management., • Expertise in cybersecurity principles, technologies, and best practices across IT and OT domains., • Strong understanding of industrial control systems (ICS), SCADA, and critical infrastructure security., • Excellent analytical, problem-solving, and risk assessment abilities., • Exceptional written and verbal communication skills, with the ability to convey complex technical information to diverse audiences., • Strong leadership capabilities with a proven track record of influencing and driving security initiatives., • Relevant certifications (e.g., CISSP, CISM, GICSP, GRID, CCNA Cyber Ops)., • Competitive compensation packages, • 401k with company match, • Medical, dental, vision plans The estimated starting salary range for this role is $135,000 - $175,000 annually less applicable withholdings and deductions, paid on a semi-monthly basis. The actual salary offered may vary based on relevant factors as determined in the Company's discretion, which may include experience, qualifications, tenure, skill set, availability of qualified candidates, geographic location, certifications held, and other criteria deemed pertinent to the particular role. EEO Statement: The Nuclear Company is an equal opportunity employer committed to fostering an environment of inclusion in the workplace. We provide equal employment opportunities to all qualified applicants and employees without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic. We prohibit discrimination in all aspects of employment, including hiring, promotion, demotion, transfer, compensation, and termination.

Job Description About the Company Armada is an edge computing startup that provides computing infrastructure to remote areas where connectivity and cloud infrastructure is limited, as well as areas where data needs to be processed locally for real-time analytics and AI at the edge. We're looking to bring on the most brilliant minds to help further our mission of bridging the digital divide with advanced technology infrastructure that can be rapidly deployed anywhere. About the role We are seeking a highly skilled and motivated Senior Security Engineer to join our Edge Team. In this role, you will be responsible for securing our cloud and edge computing environments, with a focus on our Galleon mobile data centers and their integration with our Atlas cloud platform. You will play a crucial role in designing, implementing, and managing security controls across our infrastructure, ensuring the confidentiality, integrity, and availability of our systems and data. Location. This role is office-based at our Bellevue, Washington office. What You'll Do (Key Responsibilities) • Design, implement, and manage security controls across our cloud platforms (AWS, Azure, GCP), Kubernetes environments, and Galleon mobile data centers, ensuring secure deployment practices and platform security for microservices and APIs, • Integrate security components within our CI/CD pipelines, including automated security testing (SAST, DAST, container image scanning), vulnerability scanning, and compliance checks. Ensure that security is embedded throughout the software development lifecycle, • Define and implement security configurations for infrastructure, including Kubernetes, using IaC tools (Terraform, Ansible) to ensure consistent enforcement of security policies, • Monitor and respond to security events, develop and maintain security monitoring tools, and participate in incident response activities, • Architect and implement security solutions that protect our cloud-native, hybrid, and on-premises infrastructure, including our Galleon data centers. Conduct security architecture reviews, threat modeling, and risk assessments to identify and mitigate vulnerabilities, • Partner with engineering teams to integrate security tooling into the SDLC, enabling DevSecOps adoption and fostering a culture of shared security responsibility, • Implement robust perimeter security for Galleon data centers, including physical access controls, intrusion detection systems, and video surveillance, • Design and implement network segmentation within data centers to isolate critical systems and limit the impact of security breaches, • Utilize micro-segmentation techniques to enforce security policies at the workload level, controlling communication between individual applications and services, • Implement data loss prevention (DLP) solutions to prevent sensitive data from leaving the data center environment, • Securely manage and store cryptographic keys used for encryption and authentication within the data center, • Implement robust logging and monitoring systems to track security-related events and detect anomalies, • Regularly conduct vulnerability assessments and penetration testing to identify and remediate security weaknesses, • 7+ years of experience in security engineering, with a focus on cloud-native technologies, distributed systems, and edge computing, including securing Kubernetes environments, • Strong understanding of security best practices across the SDLC, including secure coding principles, threat modeling, and vulnerability management, • Experience securing cloud platforms (AWS, Azure, GCP) and Kubernetes environments, including implementing RBAC, network policies, and container security, • Proficiency in scripting and automation (Python, Bash, Go) for security tooling and infrastructure-as-code (Terraform, Ansible), • Experience with security monitoring, threat detection, and incident response in cloud and containerized environments, • Excellent communication and collaboration skills, with the ability to work effectively with engineering teams and advocate for security best practices For U.S. Based candidates: To ensure fairness and transparency, the starting base salary range for this role for candidates in the U.S. are listed below, varying based on location experience, skills, and qualifications. In addition to base salary, this role will also be offered equity and subsidized benefits (details available upon request). Benefits • Competitive base salary and equity, • Medical, dental, and vision (subsidized cost), • Health savings accounts (HSA), flexible spending accounts (FSA), and dependent care FSAs (DCFSA), • Retirement plan options, including 401(k) and Roth 401(k), • Unlimited paid time off (PTO), • 15 paid company holidays per year #LI-ST1 #LI-Onsite Compensation$128,000—$160,000 USD You're a Great Fit if You're • A go-getter with a growth mindset. You're intellectually curious, have strong business acumen, and actively seek opportunities to build relevant skills and knowledge, • A detail-oriented problem-solver. You can independently gather information, solve problems efficiently, and deliver results with a "get-it-done" attitude, • Thrive in a fast-paced environment. You're energized by an entrepreneurial spirit, capable of working quickly, and excited to contribute to a growing company, • A collaborative team player. You focus on business success and are motivated by team accomplishment vs personal agenda, • Highly organized and results-driven. Strong prioritization skills and a dedicated work ethic are essential for you Equal Opportunity Statement At Armada, we are committed to fostering a work environment where everyone is given equal opportunities to thrive. As an equal opportunity employer, we strictly prohibit discrimination or harassment based on race, color, gender, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other characteristic protected by law. This policy applies to all employment decisions, including hiring, promotions, and compensation. Our hiring is guided by qualifications, merit, and the business needs at the time. Unsolicited Resumes and Candidates Armada does not accept unsolicited resumes or candidate submissions from external agencies or recruiters. All candidates must apply directly through our careers page. Any resumes submitted by agencies without a prior signed agreement will be considered unsolicited and Armada will not be obligated to pay any fees.

Job Description Impinj is a leading RAIN RFID provider and Internet of Things pioneer. We're inventing ways to connect every thing to the Internet — including retail apparel, retail general merchandise, healthcare items, automobile parts, airline baggage, food and much more. With more than 100 billion items connected to date, and multiple Fortune 500 enterprises around the world using our platform, we solve for a better understanding of our world. If it's a thing, we're working to connect it. Join Impinj and help us realize our vision of a boundless IoT— connecting trillions of everyday items to the Internet. Team Overview: We are a leading technology company in the IoT space with a strong focus on leveraging technology to drive operational efficiency and enhance our internal business processes. As we continue to grow, we are seeking a highly skilled and motivated Senior IT Business Systems Engineer to join our team. In this role, you will play a crucial part in supporting and improving our internal business applications, ensuring seamless operations, and optimizing business processes and performance. This role will also collaborate with developers, vendors, and 3rd party support teams. What You Will Do: • Application Programming:, • Lead hands-on technical and operational integration for internal line of business applications (e.g. CRM, ERP, HRMS), including designing and configuring applications, developing implementation plans, triaging and debugging permission issues, • Develop custom scripts and automation tools to extend system functionality and improve performance, • Analyze existing programs and develop logic for new systems, devise logic procedures, prepare flowcharting, perform coding and tests/debugs programs, and prepare systems and programming documentation, • Troubleshoot and resolve complex technical and functional issues, ensuring minimal disruption to business operations, • Maintain system standards and efficiently resolve application-related problems in collaboration with developers, system administrators, and business stakeholders, • System Enhancements & Process Optimization:, • Architect and implement system enhancements and upgrades, translating business requirements into functional specifications and system designs, • Own testing and validation efforts to ensure enhancements meet business requirements and adhere to established quality standards, • Leverage data insights and stakeholder feedback to continuously improve and refine business processes, • Document detailed business process models, including "as-is" and "to-be" states, to guide system enhancements and drive process improvements, • Implementation and Training:, • Author comprehensive documentation of system configurations, business rules, and procedures to ensure accurate knowledge transfer and support continuity, • Develop technical documentation, including user training sessions and onboarding materials, to ensure effective system utilization and increase end-user adoption and proficiency, • Own end-user troubleshooting and serve as an escalation point for complex system issues, • Project Management:, • Lead cross-functional projects of significant impact, managing and executing all phases from planning to implementation, • Serve as a technical lead for enterprise system upgrades, migrations and architecture reviews, • Adapt to shifting priorities and create strategies to mitigate downstream implications to partnersWhat You Will Bring:, • Bachelor's degree in information technology, Computer Science, or a related field (or equivalent work experience), • 8+ years proven experience as a Business Systems Analyst and Administrator or similar role supporting internal line of business applications, such as a CRM, ERP, or HRMS, • 3+ years creating, analyzing, and documenting complex business requirements within finance and operations organizations, • 3+ years supporting applications under SOX compliance, directly owning evidence collection and audit activity, • 2+ year experience in programming languages and scripting such as C#, PowerShell, and/or Python, • 1+ year leveraging a middleware solution, such as Workato or Mulesoft, to facilitate data integrations across business applications, • Experience working within in SDLC (Software Development Life Cycle) methodologies and best practices and familiarity with IT enterprise process standards and regulations (e.g. ITIL, Lean, PCI, SOX), • Experience with system configuration, testing, and troubleshooting, • Excellent analytical, problem-solving, and critical-thinking abilities, • Strong interpersonal and communication skills, with the ability to effectively collaborate with cross-functional teams and stakeholders, • Self-motivated with a strong attention to detail and the ability to work independently, • Proven background collaborating with multi-functional teams such as Finance, Sales & Marketing, and Operations, • Experience supporting D365 F&O, Salesforce, ADP Workforce Now, Concur and/or similar business applications The typical base pay range for this role across the US is $126,100 - $189,200. Individual base pay depends on various factors such as complexity and responsibility of role, job duties, requirements, and relevant experience and skills. Both market wage data and the mid-point of the pay range is reviewed and used as the starting point for all new hire offers. Offers are made within the base pay range applicable at the time. At Impinj certain roles are eligible for additional rewards, including merit increases, annual bonus and stock. These awards are allocated based on individual performance. In addition, certain roles also have the opportunity to earn sales incentives based on revenue or utilization, depending on the terms of the plan and the employee's role. US based employees have access to healthcare benefits; a 401(k) plan and company match among others. For a more comprehensive list of US employment benefits, click here. US Export Controls: This position has access to technologies or data subject to U.S. export control regulations. Under these laws, the release or transfer of export-controlled items or information to individuals who are not classified as "U.S. persons" (as defined by Immigration & Nationality Act) may require prior authorization from the U.S. government. We may require additional documentation related to national identity to determine whether an export compliance license is required for any export-controlled items. This information is requested solely for the purpose of complying with U.S. export control laws and will not be used for other purposes. Learn more about export compliance here. Why work at Impinj: Know you're making a difference. Competitive benefits. Support for remote work or a desk with a view. Weekly Q&A sessions with our executive team. Impinj provides an environment that fosters openness and innovation and is developing technology that delivers a positive impact on the world. Collaboration and teamwork are highly valued, and accomplishments are duly celebrated. We have an open paid time-off policy paired with a respect for work/life balance. Our headquarters is located in Seattle with spectacular views of the Olympics, Lake Union, and Mt Baker, which can be enjoyed from our rooftop deck. Our Brazilian site is in Porto Alegre, Rio Grande do Sul state, at "Tecnopuc," a technology park that offers a very nice workplace for the development of groundbreaking technologies. Impinj is committed to creating a diverse and inclusive work environment and welcomes applicants from all backgrounds. We are an equal opportunity employer and do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.

Job Description Join the ICHS Team! Discover how you can make a difference in people’s lives and help strengthen communities. International Community Health Services (ICHS) is a nationally recognized community health center. For over 50 years, we have provided medical, dental, and wellness care to individuals and families from all regions and all walks of life many of whom face significant barriers to receiving the care they need. We believe that quality health care supports stronger families, healthier communities, and a more just society. At ICHS, we are proud of our team-based approach and the shared commitment that drives our work. We value respect, collaboration, and compassion in everything we do. When you join ICHS, you become part of a mission-driven team that believes everyone deserves the opportunity to thrive. We offer • Competitive salary for the Seattle/Puget Sound region, • “Share the success” bonuses, • Insurance premiums 100% paid by ICHS, • Paid time off accrual up to 200 hours annually with up to 264 hours rollover year to year, • Automatic 4% retirement contribution, • 9 paid holidays a year, including 2 personal holidays The Facilities Engineer - HVAC will coordinate and manage the planning, implementing, and maintenance of the HVAC equipment for ICHS buildings and facilities. The Facilities Engineer will be the ICHS subject matter expert for technical facilities needs, primarily in HVAC systems, and will be a driver of construction and maintenance projects involving HVAC changes. This role will primarily maintain building HVAC filters, change and replace them as required, perform equipment surveys, and be familiar with lock-out tag-out protocols. Education - High school Diploma or GED. Associate degree in relevant Engineering field preferred. Experience - Five (5) years' experience in facilities engineering with thorough understanding of Building Automation Systems, electrical systems, controls, water source heat pumps, VAV systems, boilers, chemical treatment, HVAC, cooling towers, emergency generation equipment, transfer switches and life safety systems. Must have basic understanding of HVAC systems, air filtration, boilers, hot water loop systems. Other Requirement(s) - Ability to travel between ICHS sites as needed. If using personal vehicle to travel, valid Driver's License and Proof of Insurance is required. Preferred HVAC certified

Job DescriptionWe are Fresh. Together let’s build the future. With partners and clients, we practice strategy, design, development, and engineering to harness the power of technology and create what's next. Our cross-disciplinary approach blends human ingenuity and technology, empowering us to meet uncertainty with confidence. What got us to today won’t get us to tomorrow, so we test our assumptions and always strive for growth. From the products we build to the partners we collaborate with, we believe people make the difference. And we do so as a workforce representative of the communities we serve, understanding that a diverse workforce strengthens our organization. We value diversity and support a positive and welcoming environment where all of our employees can thrive. Why join Fresh? Fresh Consulting is a fast-paced, design-led, software development and hardware engineering company, offering end-to-end services to help companies innovate. We bring together amazing UX Designers, sophisticated developers, digital strategists, and top-notch engineers to help companies create fresh experiences that connect humans, systems, and machines. We've been growing fast and need someone to help us continue to manage the delivery of high quality work in a fast-paced environment. See more at freshconsulting.com. What we need: In this role, you will combine your passion and enthusiasm for robotics, open-source software and hardware technologies. You will work alongside Fresh customers and partners to build solutions, identify industry wide technical trends and help guide strategic technical decision making for the Fresh robotics team. The Fresh Consulting hardware and robotics team is working with customers to build and deploy fleets of robots into the field. Join us and help to build new state of the art software for both robots and the hardware backends that support them. We are now looking for a Software Engineer with a focus in computer vision and machine learning pipelines. They will also be responsible for developing and maintaining software solutions, integrating with sensors and componentry, and implementing integrations that meet our customers' needs. If you have a solid background in software engineering, are familiar with Python/C++, and want to be part of a fast-paced and exciting team, we’d love to chat! Daily Responsibilities • Contribute to system design by converting business needs into robust architectures and achievable solutions., • Develop modular, reusable software in Python to automate processes and tests, • Interfacing with sensors, actuators, componentry using Python/C++, • Develop software for integration with internal back-end systems, • Executing robotics software for test automation in linux environments, • BSc in Computer Science, Engineering or relevant field, • Experience as a Software Engineer or similar software engineering role, • Proficient with git and git workflows, • Strong skills in prototyping, debugging, performance optimization, and unit testing, • Proficient with Linux command line and shell scripting, • Good knowledge of Python and/or C++ project packaging and deployment, • Collaborative in an interdisciplinary team environment, • Creative approach to problem solving, analytical skills and engineering fundamentals, • Some knowledge of robotics or hardware/software development process, • Familiarity with SLAM, Path Planning, Optimization, 3D-geometry, controls & dynamics is a plus, • Familiar with containerization technologies such as Docker, • Experience with Confluence/Jira, • Software engineering experience Equal employment opportunity: All qualified persons will be considered for employment without regard to race, color, religion, sex, national origin, age, marital status, familial status, gender identity, sexual orientation, disability for which a reasonable accommodation can be made or any other status protected by law. Assistance will be gladly provided upon request for any applicant with sensory or non-sensory disabilities. *Fresh Consulting is an E-Verify participating company See Fresh in action Powered by JazzHR 1yEzo7VpXU

Job Description Strategic Mission Critical: At Strategic Mission Critical (SMC), we are more than just engineers; we are experts focusing solely on mission critical facilities. Our seasoned leadership team brings together decades of experience, equipping data center providers worldwide with robust, reliable solutions that keep pace with the evolving digital landscape. With a rapidly expanding market and the anticipated increase in demand driven by AI advancements, SMC is at the forefront of industry growth. We offer not just jobs, but career paths that reward innovation and expertise. If you want to work alongside highly skilled professionals with years of mission critical experience, then we want you to be part of a team, a team that works on major projects for top-tier data center providers. Your work will ensure the resilience and efficiency of data infrastructure that millions depend on. Position Opening: SMC is actively looking for a Mid-Level Electrical Engineer to execute electrical design for mission critical projects. Typical project types may include design of greenfield and brownfield data center facilities, design of fit-out packages for hyperscale and enterprise clients of colocation providers, data center campus planning, conceptual designs and feasibility studies, and power systems studies such as Neher-McGrath, short circuit, coordination, and arc flash. This candidate shall be capable of executing basic electrical design projects independently, taking established design criteria through generation of design plans and specifications for permitting and construction. The candidate shall also be capable as serving as a key contributor in part of a larger electrical design team on large and/or complex mission critical projects under the guidance of a senior engineer. The electrical design scope will be a part of a broader project and therefore this candidate should be capable of interfacing with design leads within SMC (mechanical, telecommunications, fire protection, plumbing) as well as externally including architectural, civil, structural, etc. The ideal candidate will be comfortable mentoring recent graduates and junior designers and engineers, reviewing the work of others, and collaborating with senior engineers to implement broad project goals. RESPONSIBILITIES: This candidate will have the opportunity to execute electrical design of various project types while working and coordinating with clients and design leads from all disciplines, as well as serve as the daily lead on smaller projects. This candidate shall have the ability to communicate effectively with co-workers and with clients while being able to meet scheduled project deadlines. Responsibilities include but are not limited to: • Design electrical infrastructure for mission critical buildings and campuses including medium voltage distribution; highly redundant power systems including various redundancy topologies such as distributed and block redundant; on-site generation and UPS backup; typical building systems such as small power, lighting, grounding, and fire alarm., • Coordinate with all internal and external disciplines for required electrical power connections., • Coordinate monitoring system interfaces for electrical equipment with controls and telecommunications engineers., • Be familiar with the basics of electrical power monitoring systems (EPMS)., • Be capable of reviewing and understanding client standards, design criteria, applicable standards, and best practices in order to apply them to a design project., • Understand local and national construction codes and project specifications., • Utilize Autodesk Revit on a daily basis to produce detailed design documents., • Have experience with the use of Microsoft tools such as Word, Power Point, Excel, and Teams., • Meet project deadlines, including working necessary hours to complete major deliverables., • Have the ability to travel when required to project sites (approximately 10-20% travel)., • Have the ability to clearly communicate with others in both written and spoken forms., • Lead junior engineers, designers, and modelers, and coordinate the tasks of small project teams to execute delivery of specific design elements., • Mentor and train junior engineers, designers and modelers to assist in developing electrical design knowledge base., • 4-year degree in electrical engineering or architectural engineering with an electrical focus preferred. 2-year degrees and EET degrees with work experience will be considered., • Minimum 4 years of experience in facility electrical design, particularly using Autodesk Revit for drawing development., • Experience in electrical design for larger industrial and commercial buildings is preferred, with experience in mission critical design a plus., • Experience performing and reviewing power studies such as Neher-McGrath, short circuit, coordination, and arc flash is a plus. Familiarity with these studies is preferred., • Experience working across the entire construction process, from schematic design through construction administration, including review of submittals and shop drawings, and field work such as existing condition surveys, site observations, and punch lists., • Experience leading small electrical design teams and having some client interface experience is preferred., • Experience using construction management tools such as Procore and Autodesk Construction Cloud., • Basic understanding of power monitoring systems for electrical systems is a plus., • Engineer-in-Training (EIT) or Professional Engineer (PE) preferred. COMPENSATION: Base Compensation: $90,000-$225,000 (Actual compensation is subject to variation due to factors such as education, experience, skills and/or location) SMC offers a competitive benefits package, with a 36-hour standard work week, hybrid working arrangement, 13 paid holidays, 100% coverage of medical, health, and dental insurance premiums for our full-time employees, and reimbursement of professional licensing costs. Spouse and family insurance premiums are subsidized by SMC. All full-time employees are additionally eligible for employer-sponsored life and long-term disability insurance as well as participation in our 401(k) plan, with annual safe harbor contribution.

Job DescriptionDescription: This is a fully REMOTE position. Only applicants who currently reside in California, Colorado, Oregon, and Washington State will be considered for this role. 3Si is a software (SaaS) company that helps governments, nonprofits, and philanthropies use data to improve the lives of children. We work with a network of state and city governments to build data systems that help identify and address early childhood service gaps. Founded in 2012, 3Si is a mission driven organization with a collaborative, entrepreneurial, innovative, and fully remote work culture. We are growing and seeking a mission driven Senior DevSecOps Engineer to join our Engineering team. Ideal candidates will bring deep security expertise and thrive in a small, fast-paced SaaS environment and wants to directly shape the company’s secure technology foundation. We’re launching a next-generation platform from the ground up, and this role will be one of our first senior engineering hires. You’ll have broad ownership across application development, DevOps, and infrastructure. If you’re an independent builder who cares about user experience and secure design, this is your chance to shape a platform that matters. As our Senior DevSecOps Engineer, you’ll be at the center of protecting the integrity, reliability, and scalability of our SaaS platform. This role goes beyond managing infrastructure — you’ll embed security into every stage of the software lifecycle, ensuring that innovation moves fast without compromising compliance or trust. From building resilient cloud environments to guiding our teams through SOC 2, NIST, and HIPAA requirements, you’ll shape the systems that safeguard our customers and enable our business to grow securely. This role also requires strong experience in SaaS development operations. The ideal candidate can balance security with building scalable, cost-effective cloud systems, and make clear trade-offs between features, performance, and expenses. Experience with analytical SaaS products is a plus, given our platform’s focus on large-scale data integration and analysis. Requirements: What You Will Do • ·loud Infrastructure & Security:?Design, implement, and manage secure, scalable cloud infrastructure (Azure, AWS, or GCP) in alignment with SOC 2, NIST, and HIPAA requirements., • Infrastructure as Code:?Use Terraform (required) to provision reproducible, compliant environments with reusable modules., • CI/CD & Automation:?Build and maintain automated pipelines using GitHub Actions for testing, deployment, and monitoring with security integrated at every stage (compliance guardrails, vulnerability scanning, etc), • Identify & Access Management: Automate provisioning and governance with Entra/Okta/SCIM, enforce least-privilege access, MFA, and conditional access across tenants., • Security Operations:?Manage encryption keys, vulnerability scanning, logging, monitoring, and incident response., • Monitoring & Incident Response:?Develop observability practices (metrics, logging, alerting) and lead incident management with SIEMs, root cause analysis, and post-mortems., • Compliance Readiness:?Partner with compliance teams to ensure infrastructure, policies, and controls align with regulatory requirements; support audits and certification renewals., • Work cross-functionally with Engineering and Product to embed security and compliance into software development and delivery., • Vendor & Tool Management:?Evaluate, select, and manage third-party tools and vendors that support DevSecOps practices., • Stay current with emerging DevSecOps tools, cloud security frameworks, and compliance regulations; bring forward best practices to strengthen infrastructure security. What You Will Bring • Bachelor’s degree or greater in Computer Science, Information Technology, or related field, • 10+ years’ experience in DevOps, Cloud Engineering, or Security Engineering, with at least 5 years focused on DevSecOps or equivalent security-focused DevOps role., • Proven expertise with cloud environments (Azure required; AWS or GCP also considered)., • Hands-on experience with CI/CD tools (GitHub Actions) and containerization/orchestration (Docker, Kubernetes)., • Deep understanding of Terraform (required), • Strong security background, including identity and access management, network security, encryption, vulnerability management, and incident response., • Experience working in regulated environments with SOC 2, HIPAA, NIST, or FedRAMP compliance frameworks., • Experience building and maintaining SaaS platforms, including multi-tenant cloud architecture, cost optimization, and system reliability., • Familiarity with analytical SaaS products or data-driven applications (e.g., data pipelines, observability, performance tuning) is a strong plus., • Familiarity with compliance automation platforms (Drata, Vanta) and SIEM/logging stacks (Azure Sentinel, Datadog), • Strong problem-solving and troubleshooting skills, with ability to balance security and delivery needs., • Excellent collaboration and communication skills, able to partner with technical and non-technical stakeholders. Why Join 3Si • Build meaningful tools that directly improve early childhood systems across the U.S., • Join a small, nimble team where your decisions have visible impact., • Work in a fully remote culture with flexibility, autonomy, and collaboration at its core. 3Si Perks 3Si offers a professional and fun work environment. We recognize and value our employees and strive to create a supportive environment for our team. Here are some of the "perks" we provide to ensure our employees can thrive: • Competitive compensation with base salary range of $160-200, plus annual bonus plan., • 100% Company sponsored Medical, Dental, Vision, STD, EAP, and voluntary life/ad&d plans., • Paid Time Off starting at 3 weeks per year and 11 paid holidays., • 401k retirement plan + match

Job Description Job Title: Contractor – Rust Software Engineer (Long-Term Engagement) Company: FS Studio Location: Remote (U.S. only) Engagement Type: Contract (long-term) Apply link: About FS Studio FS Studio is a forward-thinking software engineering company tackling some of the toughest technical challenges across aerospace, robotics, AI, and embedded systems. We thrive at the intersection of deep engineering rigor and startup agility—helping visionary partners bring bold ideas to life. Position Overview We are seeking a U.S.-based Software Engineer with expertise in C++ and Rust for a long-term contract engagement. This role centers on porting a large real-time embedded Guidance, Navigation, and Control (GNC) codebase from C++ to Rust. You’ll be working on software that directly supports advanced aerospace systems, translating mission-critical functionality into a modern, high-assurance Rust environment. This is a unique opportunity to combine aerospace-grade precision with Rust’s cutting-edge capabilities, all while contributing to software that matters. Responsibilities * Translation & Development * Translate existing C++ source code into Rust with strict adherence to provided architecture and coding standards. * Ensure functional equivalence, determinism, and performance are preserved. * Testing & Verification * Develop and run comprehensive unit tests to validate accuracy and reliability. * Demonstrate compliance with established testing standards and expected results. * Ongoing Support * Provide post-translation maintenance and optimization of the Rust codebase. * Collaborate closely with FS Studio and partner teams to keep the software current, efficient, and robust. Qualifications * Required * Strong proficiency in modern C++ and hands-on Rust development experience. * Background in real-time embedded systems (ideally GNC, aerospace, or robotics). * Proven track record of building standards-compliant, production-grade code. * Solid experience with unit testing and validation of critical software. * Strong math/controls background (linear algebra, dynamics, or control theory a plus). * Excellent problem-solving, communication, and collaboration skills. * MUST be a U.S. Person to meet ITAR compliance. * Must be located in the United States. * No need for visa sponsorship now or in the future to work in the United States. * Preferred * Prior experience in aerospace, defense, or other mission-critical software environments. * Familiarity with safety-critical or flight software development processes. * Contributions to Rust open-source projects or production Rust systems. Inquiries to

Job Description Strategic Mission Critical: At Strategic Mission Critical (SMC), we are more than just engineers; we are experts focusing solely on mission critical facilities. Our seasoned leadership team brings together decades of experience, equipping data center providers worldwide with robust, reliable solutions that keep pace with the evolving digital landscape. With a rapidly expanding market and the anticipated increase in demand driven by AI advancements, SMC is at the forefront of industry growth. We offer not just jobs, but career paths that reward innovation and expertise. If you want to work alongside highly skilled professionals with years of mission critical experience, then we want you to be part of a team, a team that works on major projects for top-tier data center providers. Your work will ensure the resilience and efficiency of data infrastructure that millions depend on. Position Opening: SMC is actively looking for a Senior Level Electrical Engineer to direct and execute electrical design for mission critical projects. Typical project types may include design of greenfield and brownfield data center facilities, design of fit-out packages for hyperscale and enterprise clients of colocation providers, data center campus planning, conceptual designs and feasibility studies, and power systems studies such as Neher-McGrath, short circuit, coordination, and arc flash. This candidate shall be capable of executing electrical design projects independently, beginning with driving concept level discussions and proceeding through generation of design plans and specifications for permitting and construction. The electrical design scope will be a part of a broader project and therefore this candidate will be highly capable of interfacing with design leads within SMC (mechanical, telecommunications, fire protection, plumbing) as well as externally including architectural, civil, structural, etc. The ideal candidate will additionally be involved in growing the electrical expertise within the company, through internal training; development and implementation of design standards; oversight and execution of quality control practices. Responsibilities: This candidate will have the opportunity to direct and execute the electrical design while working and coordinating with clients and design leads from all disciplines. This candidate shall have the ability to communicate effectively with co-workers and with clients while being able to meet scheduled project deadlines. Responsibilities include but are not limited to: • Design electrical infrastructure for mission critical buildings and campuses including campus level medium voltage distribution; highly redundant power systems including various redundancy topologies such as distributed and block redundant; on-site generation and UPS backup; typical building systems such as small power, lighting, grounding, and fire alarm., • Coordinate with all internal and external disciplines for required electrical power connections., • Coordinate monitoring system interfaces for electrical equipment with controls and telecommunications engineers., • Understand and be capable of defining key performance criteria of power monitoring systems (EPMS), including specifications, points lists, and typical network hierarchies., • Review client standards, design criteria, applicable standards, and best practices in order to understand design requirements and apply them., • Understand local and national construction codes and project specifications., • Utilize Autodesk Revit to produce detailed design documents., • Have experience with the use of Microsoft tools such as Word, Power Point, Excel, and Teams., • Meet project deadlines, including working necessary hours to complete major deliverables., • Have the ability to travel when required to project sites (approximately 10-20% travel)., • Have the ability to clearly communicate with others in both written and spoken forms., • Lead other engineers, designers, and modelers, and coordinate the tasks of multiple teams to execute project delivery of several projects simultaneously., • Mentor and train other engineers, designers and modelers to develop electrical design knowledge base., • 4-year degree in electrical engineering or architectural engineering with an electrical focus preferred. 2-year degrees and EET degrees with work experience will be considered., • Minimum 8 years of experience in facility electrical design, particularly using Autodesk Revit for drawing development., • Experience in electrical design for larger industrial and commercial buildings is preferred, with experience in mission critical design a strong plus., • Experience performing and reviewing power studies such as Neher-McGrath, short circuit, coordination, and arc flash is strongly preferred., • Experience working across the entire construction process, from schematic design through construction administration, including review of submittals and shop drawings, and field work such as existing condition surveys, site observations, and punch lists., • Experience leading electrical design teams and interfacing with clients is strongly preferred., • Experience using construction management tools such as Procore and Autodesk Construction Cloud., • Knowledge of controls and monitoring systems for mechanical and electrical systems is a plus. Base Compensation: $125,000-$350,000 (Actual compensation is subject to variation due to factors such as education, experience, skills and/or location) SMC offers a competitive benefits package, with a 36-hour standard work week, hybrid working arrangement, 13 paid holidays, 100% coverage of medical, health, and dental insurance premiums for our full-time employees, and reimbursement of professional licensing costs. Spouse and family insurance premiums are subsidized by SMC. All full-time employees are additionally eligible for employer-sponsored life and long-term disability insurance as well as participation in our 401(k) plan, with annual safe harbor contribution.

Job DescriptionThe Electrical Engineer ideal candidate has significant experience and background in Electrical Engineering / design capable of executing the core responsibilities listed below. Responsibilities: • Support medium scope projects through the detail design and implementation phase. This includes development of BOM generation, electrical control panel phasing plans, Electrical Engineering work plans, and design approval packages, • Supporting Project Engineer during transition from Detailed Design to Final Engineering, • Reviewing and providing Electrical Engineering input to Description of Operation (DOO) & Functional Specification (FSD) documentation, • Providing Electrical Engineering input for implementation plan, • Developing Electrical Engineering work plan to ensure successful project milestone achievements, • Leading Controls Layout review meetings with internal teams and Client. Supporting Project Engineer to achieve design acceptance, • Electrical device layout package, • Control panel fabrication package, • Electrical installation package, • Attending Client meetings as required, • 4-year engineering degree in Electrical Engineering (or similar engineering program) from an accredited college plus 3-5 years of relevant work experience, • Conveyor control process experience (photoeyes, solenoids, variable frequency drive, line scanner, print and apply application), • Advanced collaboration and communication skills (written and verbal communication), • Experience managing Engineering projects requiring collaboration between multiple Engineering work streams, • UL, NEC, NFPA, OSHA design requirements, • 480VAC motor control panel design experience, • Strong comprehension of Profibus, Profinet, Ethernet IP, network design and requirements

Job Description Job Title: Systems Engineer II Location: Seattle, WA, 98109 Duration: 6 Months Job Type: Contract – W2 Work Type: Onsite Note: Please don’t share your resumes if you are on CPT, OPT & H1b Job Description: • In-depth knowledge of & experience deploying and operating Windows and Linux., • Relentless passion for frugality and out-of-the-box engineering., • Strong system troubleshooting skills., • Proficiency and experience in automation via Perl/Python programming and shell scripting., • Good understanding of standard internet protocols (Ethernet, ARP, IP, ICMP, UDP, TCP, SSL, DNS, HTTP, etc.) Demonstrable grasp of security best practices in server configuration, tool development, and access controls., • Experience in building SQL queries., • AWS Experience, preferably with Systems Manager or other DevOps systems. Kindly please share your resumes with or 707-435-3471

Job DescriptionSenior Controls EngineerThis is an exciting role that will be responsible for all things control systems and will be one of the customer-facing experts for the company. This role will be extremely hands-on and will design, program, and troubleshoot control systems, lead on-site migrations, and provide critical technical support to customers. They are headquartered in the Fife, WA area. The company is a small, hands-on team whose mission is to modernize aging control systems in process environments in a variety of industries. If you are an individual who loves to work on a variety of projects and troubleshoot/modify control systems, this role could be for you!Responsibilities: • Provide technical leadership and collaborate with senior engineers on projects, • Design and modify control systems: architecture, networks, PLCs, HMIs, schematics, and panel layouts, • Develop and implement PLC and HMI programs, • Lead on-site control system migrations using company processes, • Diagnose, troubleshoot, and resolve customer system issues onsite and remotely, • Oversee panel design, drafting, and build processes, • Travel to customer sites about one week per month, or roughly 25-30% travel to support troubleshooting, installation, commissioning, and maintenance of customer control systemsQualifications:, • Bachelor's degree in Electrical Engineering or a similar degree is preferred, • Professional certifications in (Rockwell, Siemens, networking/security, etc.) are preferred, • 7+ years of relevant hands-on controls experience in industrial environments is required, • Strong troubleshooting skills across electrical and software systems, • Proficiency in PLC and HMI programming (modern and legacy platforms), • Experience designing industrial control networks, including OT infrastructure, • Collaborative, curious mindset with a drive to learn and improve, • Customer-facing technical experience, including field troubleshooting, is required, • Willingness to travel 25-30% of the time and work flexible schedules as projects requireSalary Range:, • $110,000-150,000+ depending on experience

KGS Group is looking for an Electrical Engineer to join our Bellevue, WA or Granite Bay, CA. About Us We are KGS Group, an employee-owned, multidisciplinary engineering consulting firm serving clients throughout North America. We’re different than traditional engineering firms. We believe a commitment to lasting relationships is just as critical as the expertise applied in our work. To us that means we put our clients and people first. We have the discipline to consistently deliver KGS Quality, never taking the easy way out. We always look closer and dig deeper. And no matter the project, we care enough to do it right. As an employee-owned company, we’re invested in our work and our people. Working with us means you’ll be part of some of the most interesting projects up and down the west coast. With the extensive, wide-ranging expertise within our company, you’ll have countless opportunities to learn and grow. Many of our core clients operate in the hydropower and water management fields. We are growing our U.S. team to continue to provide our industry-leading services to these clients. As we expand our presence on the west coast, we are looking for strong candidates at all levels to join our team! The Role As an Electrical Engineer, you will be responsible for providing engineering inputs integral to both small and large-scale hydro and dam projects. You will lead and mentor teams, support management of production and coordinate delivery of engineering work products often with multi-disciplinary project team members and external stakeholders. You will not only support and help grow the broader engineering team capabilities, but your particular focus will be on continuing the development of our hydropower capabilities and working with key staff in growing the business. You’ll also be involved in supporting project management duties, coordinating with internal and external clients as well as assisting with guiding and mentoring other engineers within the team. In this role you will lead teams conducting technical work for feasibility studies, engineering designs, preparation of construction drawings and specifications, and carrying out inspections for rehabilitation projects for dams and hydroelectric facilities. Your particular focus will be design delivery and mentorship, but you will also be involved in the proposal process. You will be working in a collaborative environment with a great team of engineers, technicians, scientists, and other industry-leading peers. Key Responsibilities • Provide input to those managing and executing multiple projects (small to large) from the proposal stage through to completion, • Establish connections with other departments to support and enhance service delivery, • Work collaboratively with other disciplines and multidisciplinary project teams to execute project deliverables, as well as ensure that quality objectives, schedules, and budgets are met, • Mentor junior staff, • Design modifications to, or entirely new electrical, instrumentation, and controls systems related to dams, control structures, water retaining structures, switchyards and hydroelectric generating stations, • Conduct feasibility studies for proposed designs and assess costs and benefits for alternatives in a systematic and thorough manner., • Manage and execute multiple projects from the proposal stage through to completion; Projects will include a variety of small to large projects involving water resources, flood control and hydroelectric sectors, • Prepare and review reports, • Perform calculations, • Conduct inspections and support project work on site as required, • Edit and prepare design specifications, • Conduct QA/QC reviews and facilitate the KGS’s QA/QC process., • Contribute to the development of the electrical engineering practice at KGS by assisting the electrical design leadership by documenting technical knowledge, improving internal production processes, coordinating and developing internal training content, and other tasks., • Perform other duties as assigned About You To fill the role, we’re looking for an applicant to bring forward a good mix of qualifications and previous experiences. Some highlights should include: • Minimum of a Bachelor of Science (BS) degree in electrical engineering from a recognized university; A post-graduate degree is an asset, • Minimum of 7-15 years of experience in electrical engineering with demonstrated project management skills (tracking budgets and meeting schedules), • Must be registered as a Professional Engineer (P.E.) in Washington, Oregon, or California, as well as eligible for registration as a professional engineer in other states via comity within three months of starting., • Previous consulting experience is preferred but not required., • Excellent verbal and written communication skills, • Candidate must be self-motivated, and able to work independently with minimal supervision, • Must be able to effectively assume a lead role as project engineer and communicate project and technical information with clients, • Demonstrated experience in site investigations, condition assessments, design and construction support are preferred, • Experience with station service distribution (all voltages), medium voltage equipment, fixed bus power distribution systems, Programmable Logic Controller (PLC) automation (for equipment control), generators and transformers including related monitoring systems, communication systems, system grounding, hoists and gate automation and balance of plant systems for hydroelectric stations preferred, but industrial experience will be considered, • Experience with the following would be considered an asset:, • Backup power systems (including Uninterruptible Power Supply (UPS), Direct Current systems and fuel fired backup), • Lighting (including emergency and exit lighting systems), • Fiber and copper structured cable systems, and associated networking equipment, • Distributed Control System (DCS) and PLC Automation, Human Machine Interface (HMI) and Remote Terminal Unit (RTU) integration (including any programming experience), • Protection systems experience, including specifying, setting and verifying (include reference to voltages), • Load flow analysis, system modelling, arc-flash, grounding, and other electrical studies (include reference to software used and any training), • North American Electric Reliability Corporation (NERC)/Critical Infrastructure Protection (CIP) planning, • Physical or cyber security planning or design, • Unit outage planning, • Other renewable energy experience, • Travel to project sites is usually limited but is required depending on project/client requirements. The amount of travel time desired by our employees can usually be accommodated., • Must possess a valid driver’s license and the ability/willingness to undergo security clearance checks, • Have the drive, attitude and commitment to being an active participant in our employee-owned culture is a must The salary range for this position is $120,000 to $155,000 annually. Please note that the salary range mentioned in this job description should serve simply as a guide. The final compensation offered may vary based on a variety of factors, including candidate’s experience, skills, and location. KGS Group is committed to providing a fair, equitable, and competitive package that reflects the value an individual brings to the organization. KGS Group is an employee-owned equal opportunity company offering an excellent compensation and benefits package. KGS Group welcomes and encourages applications from people with disabilities. Upon request, KGS Group will provide reasonable accommodation for disabilities to support participation of candidates in all aspects of the recruitment process.

Position Overview The Rush Companies is looking for an experienced, Project Manager /Sr Project Manager to join the Commercial Construction business who will provide leadership and technical direction for an assigned project. Rush Commercial Construction (RCC), specializes in the construction of: Class A office, medical and dental buildings, retail and multi-residential developments, and tenant improvements. This position reports to the Vice President Commercial Construction. Company The Rush Companies is a diversified real estate organization comprised of seven companies that work together to build and maintain communities. Since 1987, we have built structures and relationships that last, thanks to a commitment to exceed expectations at every turn. We are focused on building an exceptional future together by living our Guiding Principles on a daily basis. At Rush, we believe that if something is worth doing, it’s worth doing right, which is why our team is made up of experienced, creative, problem-solvers who provide solutions our clients can count on. Business Development • Develop strong relationships with consultants, owners, and subcontractors, • Prepare written and oral proposals of all types, • Develop industry ties and participate in organizations, • Introduce yourself to public speaking (Toastmasters, Dale Carnegie, etc.), • Take action on leads. Post to CRM and follow up appropriately, • When projects are underway, initiate work on the next opportunity (be proactive) Estimating and Preconstruction • Able to use Timberline Estimating for take-off quantities, compile estimate content and put together complete estimate, • Ability to develop concept level estimates, DD level estimates and GMP estimates., • Use design decision log to track impact of owner changes on estimates between phases (conceptual, DD and GMP), • Develop appropriate value-oriented options for cost reduction or to make project more constructible, • Accept responsibility for approval of estimates, whether constructed by PM or others, • Compile historical costs from complete projects, • Support subcontractor prequalification process and approve selections, • Drive a competitive but accurate subcontractor bidding process, • Establish appropriate contingency(ies) for each project Organizational Improvement • Volunteer to push company initiatives forward, • Coach, mentor, and trains others, • Organize team for success and clarity around tasks and accountability, • Understand prime contract/ participates in drafting scopes or clarifications, • Draft subcontracts in timely and thorough manner (60-day goal), • Cleans up all pco’s monthly and converts to owner change, • Issues all subcontract co’s within a month of getting approved owner change order, • Makes sure all subs are prequalified, capable to do the work and not overloaded with backlog, • Confirms that plans and specifications are adequate to construct project, • Knowledgeable about dealing with subcontractors that are out of contract compliance, • Firm but fair with subcontractors, reviews proposed co’s, negotiates effectively, • Coaches subs to great performance Project Management Skills • Review and approve all schedules, make sure they are updated monthly at minimum, and develop work arounds when delays, • Understand constraints and durations of schedule activities; confirm subcontractors have reviewed and bought in. Tie contracts to realistic schedules., • Prompt notification if owner is impacting job.Attempt to mitigate delay but protect Rush’s interests, • Lead project OAC and sub meetings (delegate to Supt. as necessary), • Assess personnel performance on projects, communicate appropriately to upper management, • Make sure project is well planned and coordinated. Oversee proper pre-project set up, trade prep meetings. Practice effective close out process. Capture lessons learned on each project, • Confirm that the superintendent is effectively managing resources in the field and handling variable costs such as clean up, dumpsters, hoisting, etc., • Document and correct all QC related issues, • Understand safety rules and promote a safe workplace; be a role model, • Manage timely procurement and submittal process, • Manage timely resolution of RFI’s, ASI’s and CCD’s, • Elevate issues of concern immediately to RCC management, • Issue owner billings accurately and timely, • Accurately process invoice, • Complete project on time, • Prompt responses to action items, owner and consultant issues, manages priorities, • Control third party rentals and work effectively with Sound Tools to optimize profit, • Completes project under budget, full fee, maximizes fee opportunities, • Effectively and accurately manage budget and schedule. Report out to management by 15th of ea/month, • Capable of using all Procore software elements to ensure job outcomes, • Controls cash flow, make sure under billings do not occur, • BS in Construction Management or industry experience equivalent, • Minimum 5 years’ experience as Project Engineer, Superintendent or Project Manager on commercial or multi-family projects, • Special Skills, • Proven written and verbal communication abilities; strong overall management, planning, problem solving and negotiation skills. Delegates work appropriately; proficient using computer applications, specifically Microsoft Office products, Microsoft Project, Procore and Bluebeam. Compensation and Benefits: Compensation: $110,000 - $140,000 (DOE) PTO: 18.5 days per year Paid Holiday: 8 paid company holidays annually. Our team members at The Rush Companies have a strong reputation for exercising integrity, good judgment and sound business practices in our dealings with clients, consultants, subcontractors and suppliers. We are committed to selecting only those individuals who share in our loyalties while also maintaining our standards of quality and safety. For more information about The Rush Companies or the application process, go to:

Job description: We are seeking a highly motivated Powertrain Controls Engineer to join our engineering team. The ideal candidate will be responsible for developing and tuning powertrain control functions, with a focus on drivability, efficiency, and system integration. This role offers an exciting opportunity to contribute to advanced automotive technologies in a dynamic and collaborative environment. Key Responsibilities • Develop and tune control strategies for acceleration and transient response, including gear shifts, transitions, coasting, and engine braking., • Optimize low-speed drivability and maneuverability (light pedal response, grade performance, load sensitivity)., • Support cold start calibration across different fuel blends and altitude conditions., • Implement and refine cruise control and altitude performance strategies (drivability, low speed, acceleration, deceleration)., • Conduct launch (idle governor) tuning for rear axle ratio ranges and transmission variants, collaborating with suppliers., • Calibrate extended idle performance (desorb and soot management)., • Develop PTO gain tuning strategies for customer-specific applications., • Apply torque limiting controls with brake application and powertrain component limits (gear, axle shaft, etc.)., • Bachelor’s or Master’s degree in Mechanical Engineering, Automotive Engineering, or a related field., • Hands-on experience with powertrain control systems and calibration., • Strong understanding of engine, transmission, drivability, and vehicle dynamics., • Proficiency in CAN communication tools, diagnostic communication, and calibration software., • Excellent problem-solving, teamwork, and communication skills.

Title: CAD Technician Duration: 6 month Contract Location: Bellevue, WA - Onsite 5 days Pay: $30-35/hr Job Description: We're looking for an outstanding mechanical engineer drafter who combines superb technical and analytical capabilities with a demonstrated ability to get the right things done quickly and effectively. This person will be responsible for developing warehouse building layouts of material handling equipment and storage using AutoCAD and Revit. The right candidate will be able to work independently with numerous stakeholders and deliver to a high standard. Must Haves: • Proficiency in 2D AutoCAD; 3D CAD experience is a plus., • Bachelor’s degree in mechanical engineering or similar STEM field, • Strong experience with Revit and AutoCAD Revit., • Familiarity with material handling equipment (MHE) and conveyor systems., • Experience with electrical controls, operations, and 3D modeling, • Ability to learn and adapt to new software tools quickly., • Strong problem-solving skills and attention to detail. Plusses: • 3D CAD experience, • Family Modeling Experience, • Hytrol Experience