Controls engineer jobs in Irving, TexasCreate job alerts

Additional Information Job Number25143898 Job CategoryEngineering & Facilities LocationW Dallas, 2440 Victory Park Lane, Dallas, Texas, United States, 75219___ ScheduleFull Time Located Remotely?N Position Type Non-Management POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display thorough knowledge of building systems, emergency response, and building documentation including reading standard blue prints and electrical schematics concerning plumbing and HVAC. Display advanced engineering operations skills and general mechanical ability. Display professional journeyman level expertise in at least three of the following areas with basic skills in the remaining: air conditioning and refrigeration, electrical, plumbing, carpentry and finish skills, mechanical, general building management, pneumatic/electronic systems and controls, and/or energy conservation. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Perform routine inspections of the entire property, noting safety hazards, lack of illumination, down equipment (such as ice makers, fans, extractors, pumps), and take immediate corrective action. Inspect and repair all mechanical equipment including, but not limited to: appliances, HVAC, electrical and plumbing components, diagnose and repair of boilers, pumps and related components. Use the Lockout/Tagout system before performing any maintenance work. Display thorough knowledge of maintenance contracts and vendors. Display advanced knowledge of engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers (e.g., Engineers I, II, and III) as necessary and supervise work in progress and act in a supervisory role in the absence of supervisors and/or management. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers and/or point of sale systems. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent. Certificate in two-year technical diploma program for HVAC/refrigeration. Related Work Experience: Extensive experience and training in general maintenance (advanced repairs), electrical or refrigeration, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. REQUIRED QUALIFICATIONS License or Certification: Valid Driver’s License License or certification in refrigeration or electrical (earned, or currently working towards receiving) Universal Chlorofluorocarbon (CFC) certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. W Hotels’ mission is to Ignite Curiosity, Expand Worlds. We are a place to experience life. We’re here to open doors and open minds. We are constantly inspired by new faces and new experiences. A tuned-in, up-for-anything spirit is at our core and has made us renowned for reinventing the norms of luxury around the globe. Whatever/Whenever is our culture and service philosophy that brings our guests’ passions to life. If you are original, innovative, and always looking towards the future of what’s possible, welcome to W Hotels. In joining W Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.

Additional Information Job Number25152929 Job CategoryEngineering & Facilities LocationThe Westin Irving Convention Center at Las Colinas, 400 W Las Colinas Blvd, Irving, Texas, United States, 75039___ ScheduleFull Time Located Remotely?N Position Type Non-Management POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display thorough knowledge of building systems, emergency response, and building documentation including reading standard blue prints and electrical schematics concerning plumbing and HVAC. Display advanced engineering operations skills and general mechanical ability. Display professional journeyman level expertise in at least three of the following areas with basic skills in the remaining: air conditioning and refrigeration, electrical, plumbing, carpentry and finish skills, mechanical, general building management, pneumatic/electronic systems and controls, and/or energy conservation. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Perform routine inspections of the entire property, noting safety hazards, lack of illumination, down equipment (such as ice makers, fans, extractors, pumps), and take immediate corrective action. Inspect and repair all mechanical equipment including, but not limited to: appliances, HVAC, electrical and plumbing components, diagnose and repair of boilers, pumps and related components. Use the Lockout/Tagout system before performing any maintenance work. Display thorough knowledge of maintenance contracts and vendors. Display advanced knowledge of engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers (e.g., Engineers I, II, and III) as necessary and supervise work in progress and act in a supervisory role in the absence of supervisors and/or management. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers and/or point of sale systems. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent. Certificate in two-year technical diploma program for HVAC/refrigeration. Related Work Experience: Extensive experience and training in general maintenance (advanced repairs), electrical or refrigeration, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. REQUIRED QUALIFICATIONS License or Certification: Valid Driver’s License License or certification in refrigeration or electrical (earned, or currently working towards receiving) Universal Chlorofluorocarbon (CFC) certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. At Westin, we are committed to empowering guests to regain control and enhance their well-being when they need it most while traveling, ensuring they can be the best version of themselves. To achieve the brand mission of becoming the preeminent wellness brand in hospitality, we need passionate and engaged associates to bring the brand’s unique programming to life. We want our associates to embrace their own well-being practices both on and off property. You are the ideal Westin candidate if you are passionate; you are active and take pride in how you maintain your well-being; you are optimistic; you are adventurous. Be where you can do your best work, begin your purpose, belong to an amazing globalteam, and become the best version of you.

Additional Information Job Number25154424 Job CategoryEngineering & Facilities LocationW Dallas, 2440 Victory Park Lane, Dallas, Texas, United States, 75219___ ScheduleFull Time Located Remotely?N Position Type Non-Management POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display advanced ability to read standard blue prints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TV's. Use the Lockout/Tagout system before performing any maintenance work. Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Extensive experience and training in general maintenance, electrical or refrigeration, parts inventory and requisition, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver’s License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. W Hotels’ mission is to Ignite Curiosity, Expand Worlds. We are a place to experience life. We’re here to open doors and open minds. We are constantly inspired by new faces and new experiences. A tuned-in, up-for-anything spirit is at our core and has made us renowned for reinventing the norms of luxury around the globe. Whatever/Whenever is our culture and service philosophy that brings our guests’ passions to life. If you are original, innovative, and always looking towards the future of what’s possible, welcome to W Hotels. In joining W Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.

Additional Information Job Number25154424 Job CategoryEngineering & Facilities LocationW Dallas, 2440 Victory Park Lane, Dallas, Texas, United States, 75219___ ScheduleFull Time Located Remotely?N Position Type Non-Management POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display advanced ability to read standard blue prints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TV's. Use the Lockout/Tagout system before performing any maintenance work. Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Extensive experience and training in general maintenance, electrical or refrigeration, parts inventory and requisition, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver’s License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. W Hotels’ mission is to Ignite Curiosity, Expand Worlds. We are a place to experience life. We’re here to open doors and open minds. We are constantly inspired by new faces and new experiences. A tuned-in, up-for-anything spirit is at our core and has made us renowned for reinventing the norms of luxury around the globe. Whatever/Whenever is our culture and service philosophy that brings our guests’ passions to life. If you are original, innovative, and always looking towards the future of what’s possible, welcome to W Hotels. In joining W Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.

Additional Information Job Number25154424 Job CategoryEngineering & Facilities LocationW Dallas, 2440 Victory Park Lane, Dallas, Texas, United States, 75219___ ScheduleFull Time Located Remotely?N Position Type Non-Management POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display advanced ability to read standard blue prints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TV's. Use the Lockout/Tagout system before performing any maintenance work. Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Extensive experience and training in general maintenance, electrical or refrigeration, parts inventory and requisition, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver’s License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. W Hotels’ mission is to Ignite Curiosity, Expand Worlds. We are a place to experience life. We’re here to open doors and open minds. We are constantly inspired by new faces and new experiences. A tuned-in, up-for-anything spirit is at our core and has made us renowned for reinventing the norms of luxury around the globe. Whatever/Whenever is our culture and service philosophy that brings our guests’ passions to life. If you are original, innovative, and always looking towards the future of what’s possible, welcome to W Hotels. In joining W Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.

Additional Information Job Number25154424 Job CategoryEngineering & Facilities LocationW Dallas, 2440 Victory Park Lane, Dallas, Texas, United States, 75219___ ScheduleFull Time Located Remotely?N Position Type Non-Management POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display advanced ability to read standard blue prints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TV's. Use the Lockout/Tagout system before performing any maintenance work. Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Extensive experience and training in general maintenance, electrical or refrigeration, parts inventory and requisition, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver’s License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. W Hotels’ mission is to Ignite Curiosity, Expand Worlds. We are a place to experience life. We’re here to open doors and open minds. We are constantly inspired by new faces and new experiences. A tuned-in, up-for-anything spirit is at our core and has made us renowned for reinventing the norms of luxury around the globe. Whatever/Whenever is our culture and service philosophy that brings our guests’ passions to life. If you are original, innovative, and always looking towards the future of what’s possible, welcome to W Hotels. In joining W Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.

Additional InformationEvening shift Job Number25163249 Job CategoryEngineering & Facilities LocationDallas Marriott Downtown, 650 North Pearl Street, Dallas, Texas, United States, 75201___ SchedulePart Time Located Remotely?N Position Type Non-Management Pay Range: $21.50-$22.30 per hour POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display advanced ability to read standard blue prints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TV's. Use the Lockout/Tagout system before performing any maintenance work. Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Extensive experience and training in general maintenance, electrical or refrigeration, parts inventory and requisition, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver’s License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. Marriott Hotels strive to elevate the art of hospitality, innovating at every opportunity while keeping the comfort of the oh-so-familiar all around the globe. As a host with Marriott Hotels, you will help keep the promise of “Wonderful Hospitality. Always.” by delivering thoughtful, heartfelt, forward-thinking service that upholds and builds upon this living legacy. With the name that’s synonymous with hospitality the world over, we are proud to welcome you to explore a career with Marriott Hotels. In joining Marriott Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you. JW Marriott is part of Marriott International's luxury portfolio and consists of more than 100 beautiful properties in gateway cities and distinctive resort locations around the world. JW believes our associates come first. Because if you’re happy, our guests will be happy. JW Marriott associates are confident, innovative, genuine, intuitive, and carry on the legacy of the brand’s namesake and company founder, J.Willard Marriott. Our hotels offer a work experience unlike any other, where you’ll be part of a community and enjoy true camaraderie with a diverse group of co-workers. JW creates opportunities for training, development, recognition and most importantly, a place where you can pursue your passions in a luxury environment with a focus on holistic well-being. Treating guests exceptionally starts with the way we take care of our associates. That’s The JW Treatment™. In joining JW Marriott, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.

Job ID: 692453BR Date posted: Aug. 11, 2025 Description: You will be a Cyber Systems Security Engineer in the Program Protection Organization. Our organization oversees all aspects of Anti-Tamper and embedded Cybersecurity across Missiles and Fire Control. We are chartered with providing the skills and innovative technologies to develop, design, produce and sustain secure products across our Lines of Business. What You Will Be Doing As the Cyber Systems Security Engineer you will be responsible for providing embedded System Security Engineering design and implementation in all aspects of System Security Engineering (SSE) process in development of Department of Defense (DoD) Weapon Systems. Your responsibilities will include: • Assessing and mitigating System Security threats/risks throughout the embedded Weapon System development life cycle., • Validating System Security Engineering requirements decomposition, allocation and analysis for embedded Weapon Systems., • Implementing System Security Engineering solutions hardware and software., • Verifying implementation of system security requirements., • Designing, implementing, deploying, and maintaining state of the art System Security architectures and countermeasures to protect and enable innovative new Lockheed Martin Missiles and Fire Control products., • Analyzing weaknesses, vulnerabilities and threats against System Security posture on product designs., • Prototyping and testing System Security countermeasures that defend against cyber-attacks against Lockheed Martin Missiles and Fire Control Weapon System products. *For a level 3, we typically look for a Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education, with 5 years of professional experience; or 3 years of professional experience with a related Masters degree, or equivalent experience/combined education. Why Join Us Do you want to be part of a company culture that empowers employees to think big, lead with a growth mindset, and make the impossible a reality? We provide the resources and give you the flexibility to enable inspiration and focus -if you have the passion and courage to dream big, work hard, and have fun doing what you love then we want to build a better tomorrow with you. We offer flexible work schedules to comprehensive benefits investing in your future and security, Learn more about Lockheed Martin's comprehensive benefits package here. MUST BE A U.S. CITIZEN - The selected candidate must be able to obtain a secret clearance. A company-sponsored interim secret is required to start. #mfccyberhotjobs #MFCnews #MFChotjobs Basic Qualifications: • Experience working within the DoD systems development life-cycle (SDLC)., • Implementing System Security requirements on DoD systems to meet U.S. government compliance requirements., • Experience supporting validation and verification of security requirements on DoD systems., • Experience developing embedded DoD National Security Systems (NSS) requiring Systems Security Engineering implementations is preferred., • Design experience through the DoD systems development life-cycle (SDLC) developing embedded system security solutions for DoD weapon or tactical systems., • Tactical as well as strategic thinking and creative problem solving., • Experience with embedded systems design., • Excellent writing skills and ability to communicate effectively., • Experience with embedded system vulnerability scanning and Software Assurance (SwA) activities., • Strong understanding of System Security Engineering (SSE) principals and process. (NIST SP 800-161)., • Experience in the identification, decomposition, allocation and verification of NIST SP 800-53 Security Controls on DoD systems. As a leading technology innovation company, Lockheed Martin's vast team works with partners around the world to bring proven performance to our customers' toughest challenges. Lockheed Martin has employees based in many states throughout the U.S., and Internationally, with business locations in many nations and territories. Experience Level: Experienced Professional Business Unit: MISSILES AND FIRE CONTROL Relocation Available: Possible Career Area: Cyber Security Engineering Type: Full-Time Shift: First

Job Description The Maintenance Technician ensures the integrity of building systems by performing routine maintenance and minor repairs while supporting the efficient operation of equipment. This role provides hands-on support for general maintenance tasks under the supervision of the Chief Engineer or Assistant Chief Engineer. Essential Duties and Responsibilities: • Perform repairs in restroom facilities, including toilets and soap dispensers; clear drains using plungers and handheld augers., • Conduct general labor tasks, such as carrying, stacking, and sorting materials; debris removal., • Safely use employer-provided vehicles to travel for parts and supplies, adhering to all traffic laws., • Maintain and/or replace door hardware; handle minor furniture repairs and floor maintenance; and conduct basic painting tasks in equipment rooms; and perform general cleaning in mechanical spaces., • Perform maintenance tasks as assigned; conduct cleaning and inspections of engineering areas, mechanical spaces, and equipment., • Replace lamps, air filters, ceiling tiles, and fire extinguishers., • Follow safety protocols and use PPE for all tasks; ensure compliance with OSHA, NEC, NFC, NFPA regulations at all properties; promote safe working environments by reporting hazards; participate in safety audits., • Communicate verbally and in writing with teammates, leadership team, vendors, tenants, and client employees in a professional manner, keeping the appropriate customer(s) informed/updated as needed., • Interact with tenants, engineers, and contractors while carrying out maintenance tasks., • Follow safety protocols and use PPE for all tasks; ensure compliance with OSHA, NEC, NFC, NFPA regulations at all properties; promote safe working environments by reporting hazards and participating in safety audits., • HS Diploma or GED required, • Technical or vocational training, and/or 1-2 years of on-the-job training in one or more of the following areas: HVAC, electrical, mechanical, process controls, or plumbing, • Basic working knowledge of laptop and phone applications for work order and facility operation systems as well as basic skills with Microsoft Outlook, • Possess engineering and trade licenses required according to local, state, or national requirements, • Familiar with fire/life safety equipment/procedures, • Proven track record of delivering excellent internal and external customer service; ability to successfully interact/communicate with tenants/vendors/contractors as well as teammates and leadership team, • Familiarity with blueprints and code requirements, • Ability to work after hours, weekends, holidays, and during emergency situations as necessary to meet the needs of the client, • Possess competent knowledge of use and care of tools, • Ability to read and write English in order to understand manuals and procedures, and write reports. Ability to stand, walk, climb ladders, and lift up to 50 pounds; perform physically demanding tasks such as stooping, crouching, and kneeling. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position is 100% in-office. The role requires working in office during standard business hours. Remote work or telecommuting is not an option for this position. #IND123 About Lincoln Property Company Lincoln Property Company ("Lincoln") is one of the largest private real estate firms in the United States. Offering a fully integrated platform of real estate services and innovative solutions to owners, investors, lenders and occupiers, Lincoln supports the entire real estate lifecycle across asset types, including office, multifamily, life science, retail, industrial, data center, production studio, healthcare, government, universities, and mixed-use properties, throughout the United States, United Kingdom, and Europe. Lincoln's combined management and leasing portfolio on behalf of institutional clients includes more than 680 million square feet of commercial space. For more information, visit: . All job offers are contingent on completion of a background check and proof of eligibility to work in the United States. By submitting your information or resume in response to this opportunity, you acknowledge that your personal information will be handled in accordance with Lincoln Property Company's privacy policy. Lincoln Property Company does not accept unsolicited resumes from third-party recruiters unless they were contractually engaged by Lincoln Property Company to provide candidates for a specified opening. Any such employment agency, person or entity that submits an unsolicited resume does so with the acknowledgement and agreement that Lincoln Property Company will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. At this time, we are not working with any agencies. Company DescriptionAbout Lincoln Property Company Lincoln Property Company (“Lincoln”) is one of the largest private real estate firms in the United States. Offering a fully integrated platform of real estate services and innovative solutions to owners, investors, lenders and occupiers, Lincoln supports the entire real estate lifecycle across asset types, including office, life science, retail, industrial, data center, production studio, healthcare, government, universities, and mixed-used properties, throughout the United States, United Kingdom, and Europe. Lincoln’s combined management and leasing portfolio on behalf of institutional clients includes more than 510 million square feet of commercial space. In addition to providing third-party real estate services, Lincoln has completed over 150 million square feet of development since its inception in 1965 and has another $20 billion currently under construction or in the pipeline. For more information, visit: Lincoln Property Company\r\n Lincoln Property Company (“Lincoln”) is one of the largest private real estate firms in the United States. Offering a fully integrated platform of real estate services and innovative solutions to owners, investors, lenders and occupiers, Lincoln supports the entire real estate lifecycle across asset types, including office, life science, retail, industrial, data center, production studio, healthcare, government, universities, and mixed-used properties, throughout the United States, United Kingdom, and Europe. Lincoln’s combined management and leasing portfolio on behalf of institutional clients includes more than 510 million square feet of commercial space. In addition to providing third-party real estate services, Lincoln has completed over 150 million square feet of development since its inception in 1965 and has another $20 billion currently under construction or in the pipeline. For more information, visit: .

Job DescriptionField Service Engineer Field Service Engineer Dallas, TX (20% - 25% Travel) $70K - $100K + Overtime Pay Position Overview Aerospace equipment manufacturer looking to hire a Field Service Technician! The Field Service Technician will be part of the post-sales team and is responsible for the installation, maintenance, and repair of our machinery and associated control systems at our client locations. The ideal candidate will have a strong technical background and the ability to troubleshoot complex mechanical and electrical issues in a field environment. Our machinery is very niche, but the core technical skills required is 5-axis CNC machining with FANUC controls. Key Responsibilities • Execute programming tasks to implement solutions, perform calibrations, and carry out adjustment procedures., • Diagnose and resolve technical issues encountered during equipment commissioning and throughout the time period our clients use our equipment, • Troubleshoot and resolve technical issues related to Siemens and Fanuc controls., • Provide training and support to customers on the operation of their machinery., • Document service activities and maintain accurate records of repairs and maintenance performed., • 5+ years of experience installing, troubleshooting, calibrating, and/or programming 5-Axis CNC machines, • Experience with Fanuc control system, • Experience with Siemens AND Fanuc control systems preferred, • Experience with PLC programming and troubleshooting., • Ability to read and interpret technical drawings and manuals., • Excellent problem-solving skills and attention to detail. Benefits • Vacation/PTO, • Medical, • Dental, • Vision, • 401k, • Gas/mileage reimbursement, • All out of state travel paid for • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 07/24/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job Description • Please note that this is for an upcoming position. We are, however, accepting applications for this anticipated need. If you are interested in joining The Building People, we encourage you to APPLY TODAY! The Building People, LLC, has a position open for a full-time Senior Building Controls Technician to provide services related to the expansion, upgrade or replacement of building automation hardware and software for smart building infrastructure. The position will work independently to meet project requirements with limited supervision. The programmer will be responsible for programming, configuring, and testing of Direct Digital Control (DDC) building automation and control systems. Responsibilities/Duties • Design and engineer control system hardware and software programming based on project plans, specifications, and other contract documents, • Ability to program projects with various levels of complexity, • Capable of performing network troubleshooting, database troubleshooting and repair programming, • Collaborates with the engineering team on the system configuration, network and software requirements, graphics, programming, and sequences of operations, • Develop and configure the sequence of operations, programming, graphics, database, network, and integrations into third party systems, • Maintains accurate and thorough project documentation and redlines, • Provides owner training as required by the project, • Executes system commissioning and functional testing, • Assist in installation of control hardware, • Startup and commission new hardware installations, • Provide project management assistance on projects as required, interfacing directly to customers, • Supervise sub-contractors and suppliers as needed Required Skills * Excellent verbal and written communication skills * Proficient in Microsoft Office Suite or related software * Programming skills * Strong analytical skills * Strong interactive and communication skills * Strong troubleshooting skills * Experience with electronics and basic electrical circuits * Thorough understanding of and ability to use appropriate tools * Excellent customer service and ability to work well with others * Knowledge of DDC Control Theory and Applications as related to HVAC equipment * Strong knowledge of common DDC communications protocols such as but not limited to BACnet, LON, Modbus, etc. Required Experience/Education * At least 3 years of experience with programming, startup and commissioning of control systems * Niagara N4 certification * Experience with multiple manufacturers of controls a plus * Technical knowledge with installation of controls equipment and ancillary devices Physical Requirements * Physically able to climb overhead or crawl under spaces to complete jobs. * Must be willing to work at heights. * Must be able to lift up to 35 pounds at times.

Job Description PHASOR Engineering Inc. is a dynamic Alberta based company specializing in engineering, design, and testing / commissioning of medium to high voltage electrical facilities. Focused on providing the most cost-effective and efficient solutions to power system engineering, we are involved in a diverse range of projects from preliminary engineering through to the commissioning and startup. We are currently seeking a highly motivated and experienced Electrical Engineering Technologist, PSE, or Engineer to join our field services team on a full time basis. If you are an excellent communicator and skilled problem-solver with strong attention to detail, we offer a dynamic work environment where you will be continuously challenged in all aspects of the testing and commissioning process. Responsibilities: • Manage and lead a commissioning crew of workers., • Testing and commissioning of MV/HV power system protection & control schemes in the utility, power generation, and oil & gas industry., • Read and interpret drawings and troubleshoot / resolve technical issues., • Train/develop employees to ensure highest performance standards are met., • Report preparation and submission., • Assist with generation of commissioning startup procedures or work instructions., • Ensure compliance with all safety practices as per corporate, client, and industry standards., • The successful candidate should possess a Bachelor’s Degree in Electrical Engineering, Power Systems Electrician Journeyman Ticket, or an Electrical Engineering Technologist Diploma from a recognized institute., • Eligible for registration with APEGGA , ASET, or similar., • Comprehensive understanding of key principles of electrical power system protection and controls including SCADA, relay protection, metering, equipment functionals, and telecom networks., • Minimum 5+ years of proven experience in the medium voltage and/or high voltage utility substations and power generation industry with experience in a supervisory role leading and running projects in greenfield and brownfield substations., • Relay testing of microprocessor-based protection IED’s (SEL, ABB, Siemens, GE, etc.) with fully automated test equipment (Omicron CMC356) and test data management., • Experienced in high voltage primary equipment testing and commissioning involving power transformers, reactors, circuit breakers, CT’s, PT’s, surge arrestors, disconnect switches, cap and reactor Banks, etc., • Testing and commissioning as per NETA/IEEE/IEC standards., • Strong understanding of CSA Z462 safety standards., • Strong interpersonal and communication skills and an extreme attention to detail are essential., • Knowledge of the Microsoft office software suite of programs coupled with strong computer skills., • Excellent organizational skills and ability to manage a wide variety of issues simultaneously., • Strong analytical, risk assessment and problem solving skills., • NETA Testing Certification an asset., • Must be legally able to work in Canada, VISA Sponsorship is not available for this position., • Valid driver’s license with clean driving record., • Typical out of town working shifts are (but not limited to) 10/4, 14/7, 14/14, 21/7, 21/14., • Working hours are generally from 7am - 5:30pm at 10hrs/day., • Daily work hours and shifts are subject to change based on project requirements, applicants must be flexible to accommodate these changes when required. Phasor Engineering Inc. offers a competitive compensation and benefits package and excellent opportunities for growth and advancement. We are an Equal Opportunity Employer committed to a diverse workforce. While we appreciate all applications we receive and the applicant's interest in our company, only those who are selected for an interview will be contacted. Other names for these roles include: Commissioning Technologist, Commissioning Engineer, Commissioning Lead, Commissioning Specialist, Commissioning Manager, Field Service Specialist, Field Service Technologist/Technician, Protection and Control Technologist/Technician, Protection and Control Specialist, Protection and Control Testing Engineer, Relay Technologist/Technician, Power System Technician, Power System Electrician, PSE, Electrical Engineering Technologist Benefits • Dental care, • Disability insurance, • Employee assistance program, • Extended health care, • Life insurance, • On-site gym, • On-site parking, • Paid time off, • RRSP match, • Vision care, • Wellness program

Job Description Required • 10+ years in cybersecurity with 5+ years in cloud security and Microsoft Purview. Education in leu of experience will be considered., • Deep expertise in Azure security architecture, Conditional Access, Microsoft 365 Compliance Center and Microsoft Purview suite of tools with an emphasis on Information Protection and DLP., • Proven experience implementing enterprise-grade DLP and Information Protection policies. Preferred • Bachelor's degree in information technology, cybersecurity, information assurance or similar., • Certifications: CISSP, CISM, Microsoft Certified: Information Protection Administrator Associate, Azure Security Engineer Associate., • Experience with scripting (PowerShell, KQL) and automation of security controls., • Familiarity with eDiscovery. Responsibilities: • Soft Title: Principal Cloud Security Engineer, • Location: Budapest preferred, but also considering US (Irving, TX)., • Office Arrangement: Hybrid Secure Azure Configuration • Regularly evaluate, recommend and implement Azure security policies that protect from cyber-attack as well as ensure changes to Azure are consistent with company policy., • Assist with the implementation and maintenance of Azure Conditional Access Policies, including device compliance and risk-based sign-in controls., • Assist with the configuration of Azure AD (Entra ID) for identity protection, hybrid join scenarios, and secure access to cloud resources., • Microsoft Purview & Data Protection, • Architect and manage Purview tools including Information Protection, DLP, and Data Security Posture Management., • Configure and maintains sensitivity labels, trainable classifiers, and oversharing assessments for SharePoint and Exchange., • Serve as the Subject Matter Expert (SME) for data protection initiatives. Security Operations & Incident Response • Provide SME support to the Security Operations (SecOps) Team when evaluating cloud/Azure security-related events., • Coordinate and support the SecOps team or 3rd party vendors for high-priority incident response and investigations., • Assist the SecOps team in the development and maintenance of cloud/Azure related playbooks for detecting and responding to cyber-attacks. Governance & Compliance • Align cloud/Azure security controls with company policies and standards., • Ensure compliance with ISO 27001, NIST CSF, GDPR, and other global regulations., • Support audits and assessments. Training & Enablement • Deliver training on secure cloud practices and Purview usage to technical teams and business units., • Mentor junior engineers and serve as a subject matter expert for cloud data protection.

Job DescriptionDescription: Who We Are: We are a full-service commercial real estate firm serving Austin, San Antonio, Dallas, and Houston with 30 years of experience developing, managing, and investing in commercial real estate. This 360-degree perspective gives us the expertise to maximize investment value while navigating through any real estate challenge. Backed by the best staff in the industry, our mission is to build trusting relationships with our clients through proven results, professional integrity, and exceptional service. Purpose / Summary of Position: The Mobile Engineer is an essential role at HPI. The Mobile Engineer is responsible for the operation, inspection, and preventive maintenance of various facility systems including HVAC, mechanical, electrical, and plumbing. Responsible for the maintenance and operation of all building equipment to ensure the operation of equipment is within design capabilities and to achieve proper environmental conditions prescribed by the building management. Priority functions / Responsibilities: • Acknowledge and respond to service requests by diagnosing and performing minor and routine maintenance/repair in a timely and professional manner. Strive to complete all service requests daily and accurately documented, including parts, in work order system., • Ensure the performance of equipment with preventive maintenance as prescribed by manufacturer's recommendations and specifications., • Responsible for all housekeeping functions and maintaining the professional appearances of equipment and maintenance spaces., • Review building operations, preventive maintenance, training, energy management and equipment status on a frequent basis., • Responsible for maintaining the building lighting system, including element and ballast repairs or replacements., • Other duties may include but not limited to moving furniture, fixtures and office partitions repairing locks, doors, hinges, furniture, and other miscellaneous items. The repair and painting of all types of surfaces, indoors and out., • The monthly inspection of fire extinguishers and/or other life/safe inspections. Various building maintenance duties as assigned by the property management., • Operation, maintenance, and repair of sanitary sewer systems, including sump pumps, basins, toilets, urinals, and piping., • Maintenance and repair of trash compactors, including electrical and hydraulic systems., • Maintenance and repair of kitchen equipment., • Complete or oversee the completion of preventative maintenance as assigned. Maintain accurate records within preventative maintenance system., • 3-5 years related experience and/or training or equivalent combination of education and experience, • Required to furnish current, valid driver’s license and proof of insurance, meeting minimum state of Texas requirement. If required to use own vehicle, remain compliant with applicable vehicular regulations including valid insurance and follow all company driving and safety requirements and procedures for transportation between properties, if individual has multiple property responsibilities. If using company vehicle, must remain insurable through the company’s carrier while employed, in addition to meeting personal vehicle requirement. Must inform HR of any change in driving status throughout employment and provide updated copies of license and certificates upon renewal., • Keep updated and adhere to Company policies, standard operating procedures, Work Order and Preventative Maintenance System, Uniform Policies, Safety Handbook, etc., • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. However, individual must have the ability to lift 100 lbs. necessary for installation and removal of equipment., • While performing the duties of this job, the employee is most of the time outside in all weather conditions. The employee is regularly required to walk, talk, and/or hear. The employee is frequently required to stand; use hands to finger, handle or feel objects, tools, or controls; and stoop, kneel, crouch or crawl. The employee is occasionally required to sit and reach with their hands and arms., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus., • Perform effective emergency maintenance (after hours) as required., • High School diploma or GED equivalent required., • Basic skills with Microsoft Office Outlook., • Excellent written and verbal communication skills. Strong organizational and analytical skills. Ability to provide efficient, timely, reliable, and courteous service to customers., • Abilities to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals., • Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form., • Abilities to read, analyze and interpret general business periodicals, professional journals, blueprints, schematics, technical procedures, or governmental regulations. Ability to write repairs, business correspondence and procedure manuals. The employee should also be able to effectively present information and respond to questions from groups of managers, clients, customers, and the general public., • Exercise independent judgment within general policy guidelines., • EPA 608 Certification required within six months., • Will be “on call” rotation with other team members. Must carry work phone and be prepared to work and service requests, including emergencies while on call, will be on call rotation with one or more others, required to learn and cover other properties accordingly., • Positive feedback from internal and external customer is a requirement of this role. Our values of passion, teamwork, and a Texas-sized competitive spirit are what make our team the best in the industry. We take pride in our homegrown culture that encourages opportunities for professional and personal growth. If you share these values and are looking to work for the leading commercial real estate firm in Texas, you have come to the right place. We invest into our employees and offer exceptional benefits like: • Health, dental and vision insurance, • 401k with a safe harbor company match, • PTO and paid company holidays, • Paid life insurance

Job Description Electrical Power Systems Studies Engineer - Dallas, TX / City near a major airport! Our client is a leader in Critical Facilities Engineering Design and Commissioning that has a national footprint and specializes in MEP and Controls. They provide design, commissioning, consulting and management expertise in the Critical Facilities Space. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. This challenging and unique role will have the opportunity to partner with all levels of engineering and design staff to develop power studies for projects once design has been completed. Design projects are primarily focused around critical power systems for new data centers and expansions to existing data centers in the hyperscale / colocation markets. They will have experience and in-depth knowledge of Electrical Power Distribution System design and installation. This person will work as part of the Engineering Team and interact closely with organizational leadership to complete Power Systems Studies. Working and communicating with internal team and clients effectively while following company's guidelines with company's goals, objectives and values in mind. Responsibilities: • Autonomous in day-to-day work with being given high level instruction on projects or assignments, • Execute and lead design teams and designs of complex scope, and coordinate activities of other personnel as needed, • Mentor engineers and assist with training and development to create a learning and growing environment, • Lead Power Systems Studies focused in the mission critical data center industry, • Independently perform Power System Studies for mission critical data center projects, • Evaluate Equipment: Assess equipment capabilities, ratings, and conditions (transformers, circuit breakers, capacitors, etc.); Determine if Equipment meets system requirements, • Lead efforts: proposal development, training / mentoring, and development of standards / automations to improve deliverables, • Conduct Power Systems Studies and produce reports along with final deliverables including breaker settings tables, TCC's, and arc flash labels, • Load Flow Studies: Analyze current and future system load to ensure power delivery without overloading components, • Short Circuit Analysis: Evaluate potential fault conditions to determine the system's response and ensure that equipment ratings are not exceeded., • Protection Coordination: Study the settings of protective devices such as relays, circuit breakers, and fuses to ensure they coordinate correctly and provide optimal protection., • Arc Flash Analysis: Conduct studies to determine potential arc flash hazards, calculate incident energy, and recommend safety practices and protective equipment., • Transient Stability Analysis: Evaluate the power system's ability to maintain synchronism after large disturbances, such as faults or sudden changes in load, motor starting, etc., • Develop proposals including project scope, schedule and budget, • Effective time management of project design team including forecasting resources and resource coordination, • Identify potential project scope changes; aid in development of strategies to minimize impact and changes from estimated costs and project deadlines, • QA/QC peer reviews for projects which candidate is not the engineer, • 8-15 year's Electrical Engineering experience, • Bachelor's Degree in Electrical Engineering or similar engineering degree, • Licensed PE / EIT a Plus, • Possess advanced knowledge of electrical topologies associated with mission critical facilities, • Experience designing electrical power systems for complex data center/mission critical facilities, • Experience with Protective Devices: relays, circuit breakers, and fuses with knowledge of how they function, what versions and device settings, • Understand ratings, capabilities, and conditions of various power system equipment, • SME of industry and safety standards related to power systems, with emphasis related to arc flash hazards and other safety-related matters, • Understand effects and requirements of connecting new generation or loads to existing systems, • Power system simulation software with one of the following: ETAP, PSS/E, SKM, Easy Power, • MS Office Suite (Excel, Word, Outlook, PowerPoint, Teams), • Skilled at reviewing design drawings and equipment submittals, • Perform code analysis including selection of equipment, wiring, etc. to meet code requirements, • Conduct code analysis and possess advanced knowledge of electrical codes, • Analyze and prepare documents, reports and correspondence, • Client facing experience and at times serve as primary point of client contact on various projects, • Ability to successfully work independently; Self Starter and should prioritize well, • Effective communicator - both oral and written form (tech and non-tech), • Proactive, resourceful, and a multitasker, • Exceptional organizational skills with an attention to detail, • Skilled in completing assignments accurately and in a timely manner, • Previous experience in the Military / Military Veterans a huge plus!, • Experience with Electrical / Mechanical: Navy nukes - EMN, ETN, MMNs, Seabees, Army - Power Generation, Air Force – Power Production, Generator Techs, Maritime, Coast Guard, Army National Guard, etc. After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description ob description: Position Overview: As a Senior Controls Engineer at TIGERFLOW, you will play a vital role in the design, programming, and support of our advanced packaged pump systems. From concept to completion, you’ll be involved in every stage of the project lifecycle, working closely with sales, production, mechanical, and electrical engineering teams. Your expertise will shape the development of PLCs and HMIs for custom applications, ensuring seamless integration and optimal performance. Duties and Responsibilities: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. · Write and develop code for Programmable Logic Controllers (PLCs) from manufacturers like Schneider, Eaton, and Allen-Bradley. · Create software for Human Machine Interfaces (HMIs) such as Schneider, Red Lion, and Delta. · Configure and program Variable Frequency Drives (VFDs). · Develop solutions that incorporate motors, pumps, valves, and instrumentation into cohesive systems. · Provide technical support to customers and representatives with varying expertise levels. · Conduct site visits for system startups, installations, and troubleshooting. · Maintain precise documentation for control system designs, configurations, and programming. · Serve as a mentor by leading junior engineers and designers · Drive continuous improvement initiatives in control system design and execution Minimum Qualifications: To perform this job successfully, an individual shall have at minimum the qualifications below. · Bachelor’s degree in Electrical Engineering, Computer Engineering, Mechatronics, Automation, or a related field. · Strong understanding of electrical principles, power distribution, and control system calculations. · Experience with controller programming languages (Ladder Logic, Structured Text, and Sequential Function Chart). Preferred Qualifications: To below is a list of preferred qualifications to perform this job successfully. · Familiarity with IEC 61131-3 programming standards. · Understanding of UL 508A control panel standards. · Experience navigating NFPA 70 (NEC) · Proficiency with CAD software, such as Autodesk AutoCAD, or EPLAN. · Knowledge of standard programming languages like VBA, .NET, SQL, or Python.

Job DescriptionDescription: The Slate River Systems’ Senior Controls Systems Engineer will design and implement MHE controls systems. These systems vary in complexity and scope and may include, but are not limited to: Pallet Conveyor, Case Conveyor, Sortation, ASRS and AGVs control, and may interface with Warehouse Control Systems (WCS), Robot Control Systems (RCS), Traffic Management Programs, Supervisory Control and Data Acquisition systems (SCADA). DUTIES AND RESPONSIBILITIES: • Develop standard controls hardware offerings as listed below but not limited to Standard Electrical Drawing Sets; Control Cabinets; Field Enclosures; Scanners, Scales, Profilers; Vision systems; Industrial Ethernet and Machine Communications; and Power Distribution., • Assist Project Engineering with Pre-Sales Support; Lead Hardware and Software Tech reviews; Hardware Design, PLC Software, SCADA Design and Emulation; Field Commissioning; and Final Acceptance. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Requirements: QUALIFICATIONS – EDUCATION AND/OR TRAINING: • Bachelor’s degree in electrical, or related field with industry experience in controls engineering. EXPERIENCE: • 5+ Years of controls engineering experience directly related to material handling (Case/Poly Conveyor, Sortation Systems, Pallet Conveyor, AGVs, ASRS), • Must have experience with communication to WCS systems, • Experience with Emulation packages such as Emulate3D, • Experience with Industrial Ethernet Applications, • Experience with Power distribution, FLA Calculations, and Efficiency Calculations, • Experience working with cross disciplinary project teams, • Experience with Designing Control Systems and hardware following NFPA and UL, • Experience with Safety Standard such as ISO13849 GENERAL SKILLS: • Ability to travel at least 50% of the time., • Proficient in AutoDesk applications, mainly AutoCAD., • Demonstrable strong expertise with PLC programing in Rockwell Studio 5000 and the ability to work with other PLC platforms such as CodeSys and Siemens.

Job DescriptionDescription: Controls and Integrations Engineer Remote National Travel Required – 90 – 100% travel Candidates within a 1 Hour Radius of any International Airports through the continental United States of Americaare encouraged to apply and will be seriously considered Join Reiser as a Controls and Integration Engineer and Make an Impact! Are you passionate about technical problem-solving and providing exceptional customer service? Join a team with over 60 years of success in the food equipment industry, recognized globally for quality, innovation, and unmatched customer support. Reiser is the trusted name for food manufacturers, delivering better, smarter solutions in food processing and packaging. We take great pride in providing the resources our customers need to ensure their success. Our team of talented and passionate professionals works hard, embraces challenges, and is wholeheartedly dedicated to the success of our customers. This customer-centric focus has led to extraordinary growth, and we are now seeking an experienced Controls and Integrations Engineer to support our Service and Development teams. Our Vision • Robert Reiser & Co. will serve the food industry and other selected markets by selling and supporting equipment that provides solutions to customer needs., • Every customer contact will result in an improved relationship with that customer., • We will continuously strive to strengthen our supplier partnerships., • We will encourage our fellow employees to reach their potential. Our Controls and Integration Engineers play a pivotal role in delivering customized food processing and packaging solutions for all types of food manufacturers across the country. In this position you will be interfacing directly with sales, engineering, development and our customers, travelling to their facilities across the United States, and troubleshooting electrical and control systems. You will work on developing new equipment and applications with our Canton-based development and engineering teams. If you're passionate about automation, thrive on solving real-world challenges, and enjoy working closely with customers, this role offers the chance to make a real impact. The person in this role will drive innovation and system integration and play a crucial part of working with high-speed bakery production lines. They will primarily be working with Allen Bradley and helping migrate standard offerings based on a Sigmatek processor then to Allen Bradley specifically for bakery. At Reiser, our mission is to support our sales and service teams, take care of our customers and meet and exceed expectations. We value creativity, collaboration, and technical excellence, and we’re looking for someone who shares that mindset. Job Duties may include but are not limited to: Essential Functions • Work closely with Reiser Engineering, Service, and our customers to understand and troubleshoot systems., • Work with the Reiser Development team on R&D projects and develop solutions within a team-based environment., • Understand how to electrically integrate our equipment into our customer’s manufacturing lines including power requirements, digital signal handshakes, Ethernet interconnects, and PLC programming., • Generate required documentation including manuals, and procedures on new projects., • Train our technicians and customers in the proper use, maintenance, and repair of the electrical and controls systems of our equipment., • Learn and understand how our supplier’s equipment control systems work., • Creative Problem Solver – Able to think quickly and adapt when faced with unexpected challenges in the field, • Strong Understanding of Network Topology – Able to design, interpret, and troubleshoot industrial networks, • Service-Minded Approach – Com – Comfortable with frequent travel, customer-facing environments, and remote troubleshooting, • Experienced Road Warrior – Comfortable with frequent travel, customer-facing environments, and remote troubleshooting, • PLC Configuration & Integration – Upload, download, and configure programs to/from Allen-Bradley PLCs, • Ladder Logic Proficiency – Read, interpret, and modify ladder logic to enhance or troubleshoot machine performance, • Custom PLC Programming – Tailor and adapt PLC code to meet specific customer or application requirements, • Industrial Network Integration – Seamlessly connect production line equipment into existing plant-level architectures, • Ethernet/IP Troubleshooting – Diagnose and resolve issues within existing Ethernet/IP network environmentsRequirements:, • Minimum of 3 years of electrical controls and integration experience., • A bachelor’s degree in electrical engineering or equivalent experience, • Knowledge of processing equipment., • Experience troubleshooting PLC’s (Allen Bradley Preferred), motor controllers, servo controllers, safety devices. Programming required., • Proficient experience interpreting and understanding US and European electrical schematics with AutoCAD and Draftsight., • Ability to communicate effectively with technical and non-technical people via reports, emails and verbal communication., • Strong curiosity and desire to learn new things., • Previous experience with an equipment manufacturer - food industry experience is highly desirable.

Job DescriptionDescription: Davenergy Solutions is a rapidly growing, profitable company, headquartered in San Diego, CA. Our employees are the key to maintaining our competitive edge. To attract and retain the best industry talent Davenergy Solutions shares its success with its employees and is committed to providing a professional work environment where learning, growth and recognition are highly valued. If you are seeking an opportunity to work in a progressive organization that will offer you diversified challenges and an excellent opportunity for advancement, please review our current employment opportunities. For more information about Davenergy Solutions and open positions please visit our website at . We are seeking a full-time Construction Manager/Mechanical Engineer Plumbing (CM/MP) at the Dallas VA Medical Center in Dallas, Texas. This project phase constructs approximately 166,000 gross square feet (GSF) of space for a new 30-bed Long-Term Spinal Cord Injury (LTSCI) unit with associated clinical and administrative support spaces at the VA North Texas Health Care System in Dallas, Texas. Construction of the new LTSCI includes renovation of a portion of the existing Acute Care Spinal Cord Injury Building to join and integrate with the new LTSCI. Construction also includes modification and realignment of the campus loop road, utility upgrades, and associated site improvements. Position Description • Conducts portions of daily inspections of site work, building construction work; documents discrepancies, code violations, improper materials, or techniques in the application of materials, substandard or poor-quality workmanship; monitors schedules on various aspects of ongoing daily activities to identify and mitigate project slippage and coordinate project phasing., • Maintain accurate and complete files relating to the Construction Management (CM) services on the project that the Government may inspect at any time., • Reviews contractor's submittals and RFIs; maintains accurate and complete job files including as-built drawings and specifications; identifies progress delays and recommends appropriate corrective measures to the lead engineer toward mitigating delays and maintaining the progress schedule., • Submit daily, weekly, and monthly reports indicating work completed, work in progress with estimated completion dates, work scheduled and outstanding work., • Utilize computerized management system applications, processing requests for information, preparing draft contract modification documents for the senior resident engineer’s use, etc.; maintaining an inventory of materials, supplies and equipment and monitoring the quantity of materials used in the general administration and conduct of office operations.Requirements:, • Knowledge of all aspects of commercial hospital mechanical construction including but not limited to underground mechanical installation, medical gas systems, domestic water systems, chilled water systems, and steam systems., • Knowledge and design experience of plumbing systems (equipment sizing, water heating systems, chilled water systems), low Heating Ventilation and Air Conditioning (HVAC) systems, testing and balancing, operations, piping, sheet metal duct systems, and control systems including direct digital controls., • Ability to provide cost estimates and take-offs for the mechanical contract modifications., • Ability to determine compliance of workmanship, materials, equipment and installed work with contract requirements and industry standards., • Working knowledge and understanding of building, safety, and environmental codes., • Working knowledge of environmental, civil, safety, architectural and structural fields., • The Construction Manager/Mechanical Engineer Plumbing (CM/MP) shall be able to quickly understand and master the requirements of the local state and federal jurisdictions and the requirements of each in relation to this project., • Experience in the resolution of unforeseen site and design conditions/problems and propose cost effective technical solutions., • Experience conducting inspections and inventories of such structures to identify and note deficiencies, problems, or the general physical condition of such structures., • Must have six (6) years of experience practicing mechanical engineering., • Must have six (6) years of experience inspecting mechanical construction., • Ability to utilize a variety of software programs to monitor, update, and produce work products by applying knowledge of computer literacy., • The CM-MP shall be a licensed professional with a degree in Mechanical Engineering with Specialization in Plumbing from an accredited institution of higher learning. The individual shall have a minimum of six (6) years of experience in both design and construction of plumbing & water systems., • Ability to utilize a variety of software programs to monitor, update, and produce work products by applying knowledge of computer literacy., • 401(k), • Bi-Weekly 401(k) Company Contribution (3% of Salary), • Annual Profit-Sharing contribution to 401(k), • 10 Paid Federal Holidays, • Health Insurance, • Dental Insurance, • Vision Insurance, • Accident Coverage, • Short Term Disability, • Long Term Disability, • Term Life Insurance, • Medical Bridge, • Critical Illness

Job Description Union Technologies is reindustrializing America’s defense manufacturing base with a first-of-its-kind Factories-as-a-Stockpile™ model, integrating advanced robotics, manufacturing, and software into sovereign factory systems at scale. Headquartered in Dallas, Texas, UNION is dedicated to restoring America’s industrial strength and guaranteeing deterrence for the century ahead. We recently emerged from stealth with $50M in funding led by top-tier venture investors and strategic partners. Read more in our Press Release We are seeking a Senior / Lead Electrical Engineer to design, integrate, and improve the electrical‑controls backbone of our next‑generation manufacturing lines. You will own system architecture—from concept and specification through commissioning and continuous improvement—ensuring every robot, drive, and sensor operates in concert with our production goals. Key Responsibilities: Controls Architecture & Strategy • Define the multi‑year controls roadmap—hardware standards, network topologies, and safety objectives—aligned with business growth., • Establish best‑practice design guidelines for panels, wiring, and device selection. System Design & Specification • Lead the electrical design of robotic cells, automated test rigs, and high‑speed material‑handling equipment., • Produce single‑line diagrams, panel layouts, and BOMs; oversee contractor and vendor deliverables., • Select PLCs, safety relays/PLCs, drives, vision systems, and field instrumentation. Integration & Commissioning • Coordinate cross‑functional teams to bring new lines from dry‑fit through full‑rate production., • Plan and execute FAT/SAT, system validation, and hand‑off to operations., • Troubleshoot controls and power issues to ensure seamless ramp‑up. Data & Connectivity • Collaborate with OT/IT teams to ensure reliable network communication (EtherNet/IP, Profinet, OPC UA) and accurate data capture for OEE and predictive‑maintenance dashboards. Project Leadership • Manage $1 M–$10 M automation projects: scope, schedule, budget, and risk., • Present project status and KPIs to executive leadership and stakeholders. Safety & Compliance • Own electrical and functional‑safety standards—NFPA 70/70E, ISO 13849, IEC 62061—and perform risk assessments and validations., • Ensure UL / CE and ANSI/RIA compliance for all automated equipment. Continuous Improvement • Drive OEE gains by identifying cycle‑time constraints, power‑quality issues, and reliability gaps., • Implement energy‑efficiency and condition‑monitoring initiatives. Technical Mentorship • Guide a team of engineers and technicians; review designs, share best practices, and foster a culture of disciplined engineering. Minimum Qualifications: * B.S. in Electrical, Controls, or Mechatronics Engineering (M.S. a plus). * 10+ years in industrial automation / controls, with 5+ years leading complex projects. * Demonstrated success delivering multiple high‑throughput automation cells or lines—from concept through sustained production. * Strong knowledge of PLC/HMI hardware families, robotics platforms (Fanuc prefered), industrial networks, and functional‑safety standards. * Proven ability to translate technical issues into clear business impact for executive stakeholders. Preferred / Bonus Skills: * Experience in defense, aerospace, or other regulated manufacturing environments (ITAR, AS9100). * Familiarity with collaborative robots, AMRs/AGVs, machine‑vision inspection, or edge‑analytics solutions. * PMP or Six Sigma certification and experience with Lean manufacturing principles. #LI-UNION #ZR Join the mission. We'll handle the move. Exceptional talent shouldn't be bound by geography. If you're ready to relocate to Dallas, TX and join us in reindustrializing America’s defense backbone, we'll make it easy—and for those who move quickly, additional incentives may be available. Compensation Range: $115K - $232K

Job DescriptionPosition Overview: We are seeking an on‑site liaison across Reno and Austin, tightly connected to the Dallas plant. You will own fast containment, MRB/GP12 execution, and closed‑loop feedback that drives zero escapes on CTQ. You must read and interpret engineering drawings with GD&T (a.k.a. GN&D) and clearly communicate issues and risks with both customer and internal engineering. Responsibilities: · Customer‑site presence — Reno (≈50%)o Lead on‑site containment (stop/hold/segregate), build suspect lists, coordinate rework/returns.o Run MRB & GP12 for AOI‑flagged parts: image pull‑up, objective‑evidence review (e.g., continuity logs), pass/fail decisions; no ship without evidence.o Perform LPAs, line walks, verify corrective actions; maintain daily scorecards (DPPM, escape rate, time‑to‑containment).o Serve as the day‑to‑day voice to customer SQ/production; deliver concise, data‑first updates and recovery plans.· Customer‑site support — Austin (≈10%)o Support trials/builds/audits; collect early signals (fit‑up, assembly, electrical continuity) and escalate with annotated prints.o Align on change points and readiness with customer teams; feed learnings back to Dallas.· Factory support — Dallas (≈40%)o Close the loop with stamping/assembly/test/pack to prevent recurrence; align control plans, CTQs, and measurement methods.o Convert customer feedback into structured 8D/5Why/Is–Is Not; drive sustainable corrective actions.o Support AOI parameter tuning, continuity‑gate/“release‑code” processes, and eMRB/evidence capture (images, logs, sign‑offs).o Systems, data & communicationso Maintain SN‑level traceability: AOI images, MRB/GP12 decisions, objective measurements (e.g., continuity), and release codes.o Publish daily “Reno/Austin → Dallas” briefs (in English; Chinese summaries preferred): top defects, hotspots, escapes, ETA to clean‑point, risks/asks.o Escalate early with quantified impact and interim mitigations.o 30/60/90‑Day Outcomes· Day 1–14 (Dallas training): Complete Quality & Engineering onboarding; align CTQs, prints/GD&T, AOI rules, MRB/GP12 checklists; gain system access (eMRB/MES).· 30 days: Stand up GP12 lane & MRB checklist at Reno; enable image pull‑up + decision logging; agree SLAs (<2h to containment, <24h to suspect list).· 60 days: Zero CTQ escapes; ≥30% faster MRB re‑review cycle; live AOI–MRB–GP12 dashboard; first closed 8Ds with verified effectiveness.· 90 days: ≥50% reduction in repeat defects; release‑code gate active at ship points; PFMEA/control plan matched to actual risks. Qualifications: · 3–7 years in Supplier Quality / Resident Engineering / Manufacturing Quality (automotive or high‑volume preferred).· Able to read and interpret engineering drawings with GD&T (GN&D)—feature controls (position/profile/flatness), datums, and basic stack‑ups; can communicate deviations clearly with design/manufacturing engineering using annotated markups.· Hands‑on with MRB, GP12/containment, AOI image review, defect mapping, and customer‑side interactions.· Proficient in 8D/5Why, SPC, control plans, PFMEA; comfortable creating measurement plans from prints.· Strong data skills (Excel/Sheets; bonus: Power BI/Tableau or basic Python for trend analysis).· Excellent cross‑functional and customer‑facing communication; decisive under time pressure.· Language: English required; Mandarin Chinese speaking preferred (ability to summarize daily updates in both languages is a plus).· Able to travel routinely between Reno, Dallas, and Austin Preferred: · Experience in metal stamping/busbar/assembly; exposure to electrical/continuity checks and AOI tuning.· Prior resident engineer role at an OEM/customer site.· MES/QMS/eMRB experience and evidence‑based release processes; ability to draft bilingual work instructions. Work Environment & Schedule · Primarily on customer production floors and quality labs (PPE required).· Day shift with flexibility for off‑shift/weekend coverage during excursions, builds, or audits. What Success Looks Like · Zero CTQ escapes to the customer.· < 2 hours to containment; < 24 hours to a verified suspect list on any event.· Measurable reduction in MRB/GP12 rework via robust 8D closures and parameter/control‑plan updates.· Trust built with the customer through proactive, transparent, bilingual communication. Location & Travel: ~50% on‑site at the customer’s Reno, NV factory; ~40% at our Dallas, TX factory; ~10% at the customer’s Austin, TX site. Routine travel between sites; occasional off‑shift/weekend support during ramps. Onboarding: First 2 weeks full‑time in Dallas for Quality & Engineering training (process, CTQs, AOI, MRB/GP12, eMRB/evidence capture).

Job Description Career Strategy Consultants is seeking a skilled Controls Engineer for a direct-hire opportunity with a leading U.S. manufacturer near Dallas, TX. This position focuses on designing and optimizing systems that improve productivity, quality, and safety in a continuous manufacturing environment. The ideal candidate is both analytical and hands-on, with strong experience in control system design, process automation, and cross-functional project leadership. This is an on-site role and will report directly to the department manager. Key Responsibilities: * Solve complex, highly technical problems related to automation and production efficiency. * Improve and maintain new and existing control processes, optimizing for throughput and quality. * Eliminate waste of time, materials, energy, and other non-value-added resources. * Create documentation such as work instructions, control plans, and process flow/failure analyses. * Troubleshoot and support both new and legacy equipment. * Lead cross-functional teams in achieving process improvement and automation goals. * Develop and implement control systems that enhance safety, quality, and productivity. * Guide technical staff during equipment repair and system upgrades. * Ensure all safety and electrical standards are met and maintained. * Perform additional related duties as assigned. Required Skills & Experience: * Strong problem-solving and solution-oriented mindset. * Experience in a continuous manufacturing environment (extrusion experience preferred). * Project management and technical planning abilities. * Familiarity with AC/DC electrical systems (up to 480 volts). * Proficient with: * Allen Bradley PLCs * RSLogix 5000, Studio 5000 * FactoryTalk View Studio * Ethernet/IP networking * AC drives and motor controls * Experience with AutoCAD Electrical a plus. * Knowledge of NFPA 70E and industrial safety standards preferred. Education & Qualifications: * Bachelor’s degree in Mechanical, Electrical, Mechatronics Engineering or related field preferred. * 5+ years’ experience in industrial engineering, maintenance, or controls. * Candidates without a degree may be considered with 10+ years of relevant experience, including time in an engineering role. #ZR Company DescriptionOur mission is to provide the most professional Human Resources and Staffing services available to assist organizations in meeting their strategic objectives and help individuals reach their personal and professional goals. Our goal is to enhance our client's lives both economically and ethically, by providing services that are value-based. Recruiting services provided by Career Strategy Consultants are conducted by a staff of experienced professionals to meet all of your staffing needs. Our recruiters have worked in a variety of industries, including healthcare, construction, manufacturing (union and non-union), financial services, life sciences, law/paralegal, information technology, and logistics & supply chain. Our group is fully capable of focusing our search locally, nationally, or internationally to source viable candidates to fulfill any hiring need. Please contact us for more information about creating customized staffing, coaching, recruitment, training, and additional HR strategies for your business. Please review our other open positions on our website: mission is to provide the most professional Human Resources and Staffing services available to assist organizations in meeting their strategic objectives and help individuals reach their personal and professional goals. Our goal is to enhance our client's lives both economically and ethically, by providing services that are value-based. Recruiting services provided by Career Strategy Consultants are conducted by a staff of experienced professionals to meet all of your staffing needs. Our recruiters have worked in a variety of industries, including healthcare, construction, manufacturing (union and non-union), financial services, life sciences, law/paralegal, information technology, and logistics & supply chain. Our group is fully capable of focusing our search locally, nationally, or internationally to source viable candidates to fulfill any hiring need.\r\n\r\nPlease contact us for more information about creating customized staffing, coaching, recruitment, training, and additional HR strategies for your business. Please review our other open positions on our website:

Job Description About Us Clayco is a full-service, turnkey real estate development, master planning, architecture, engineering, and construction firm that safely delivers clients across North America the highest quality solutions on time, on budget, and above and beyond expectations. With $7.6 billion in revenue for 2024, Clayco specializes in the "art and science of building," providing fast track, efficient solutions for industrial, commercial, institutional, and residential related building projects. About Clayco Design and Engineering Clayco Design and Engineering (CDE) was created to diversify and grow Clayco's industrial business unit's capabilities with a focus on efficiently delivering robust design-build architectural and engineering solutions. The Clayco Design and Engineering team brings a tremendous amount of engineering expertise to the Clayco enterprise from a wide array of industrial segments such as food & beverage, consumer products, manufacturing, and life-science products. The Role We Want You For We are seeking a Senior EPMS Engineer – Mission Critical to lead the design, development, and implementation of Electrical Power Monitoring Systems (EPMS) for mission-critical projects. This role will focus on developing real-time power monitoring, system integration, data analytics, and advanced reporting solutions for data centers and high-reliability infrastructure. The ideal candidate will have extensive experience with power monitoring software, SCADA integration, communication protocols, and power system analysis. The Specifics of the Role • Design and implement Electrical Power Monitoring Systems (EPMS) for mission-critical facilities, ensuring high reliability and performance., • Develop real-time monitoring and analytics solutions to track power usage, energy efficiency, and system reliability., • Configure and integrate EPMS with SCADA, Building Management Systems (BMS), and Electrical Infrastructure for seamless operation., • Program and troubleshoot EPMS software and hardware components, including power meters, gateways, and data acquisition devices., • Define network architecture for EPMS, ensuring compliance with cybersecurity best practices., • Collaborate with electrical engineers, controls engineers, IT teams, and commissioning specialists to ensure EPMS functionality aligns with project requirements., • Develop custom dashboards, alarms, and reporting tools to enhance operational visibility., • Manage vendor relationships and oversee system deployment, commissioning, and validation., • Provide technical support and training to end users on EPMS operation and maintenance., • Bachelor's degree in Electrical Engineering, Computer Engineering, or a related field., • 10+ years of experience in electrical power monitoring, controls engineering, or automation, with at least 5 years in mission-critical environments (data centers, advanced manufacturing, etc.)., • Expertise in EPMS software platforms (Schneider Electric Power Monitoring Expert, Eaton Foreseer, Siemens EPMS, etc.)., • Strong knowledge of power metering devices, SCADA/HMI interfaces, and communication protocols (Modbus, BACnet, SNMP, OPC, DNP3)., • Experience with electrical distribution systems, load monitoring, and power quality analysis., • Familiarity with NFPA, IEEE, NEC, and industry standards related to power monitoring and electrical system reliability., • Experience with system integration, cybersecurity for EPMS networks, and data visualization tools., • Excellent problem-solving, communication, and leadership skills., • Our clients and projects are nationwide – Travel will be required., • No other builder can offer the collaborative design-build approach that Clayco does., • We work on creative, complex, award-winning, high-profile jobs., • 2024 Best Places to Work – Crain's Chicago Business, St. Louis Business Journal, Los Angeles Business Journal, and Phoenix Business Journal., • 2024 ENR Midwest – Midwest Contractor (#1)., • 2024 ENR Top 100 Design-Build Firms – Design-Build Contractor (Top 5)., • 2024 ENR Top 100 Green Contractors – Green Contractor (Top 5). Benefits • Discretionary Annual Bonus: Subject to company and individual performance., • The salary range for this position considers a wide range of factors in making compensation decisions including but not limited to: Education, qualifications, skills, training, experience, certifications, internal equity, and location. Compensation decisions are dependent on the facts and circumstances of each case.

Job Description Forhyre is seeking a talented individual that will be able to provide security architecture support and interface across the program as needed. This support includes, but is not limited to, cybersecurity solutions, providing technical strategy for solutions, guidance, policy, and implementations. The successful candidate for this position is a highly motivated individual, with a strong IT security background who excels integrating, operating, and deploying security technology and solutions and interacts well with both internal teams and clients. Note: U.S. citizens and those authorized to work in the U.S. are encouraged to apply. We are unable to sponsor at this time. Responsibilities: • Engineer, implement and monitor security measures for the protection of computer systems, networks and information, • Develop and implement security policies and controls to support the Cyber Security framework, • Manage the existing cyber security training program across global, multilingual business, • Assists in ensuring global Information security program meets all industry regulations, standards, and compliance requirements, • Drive adoption of infrastructure security best practices and work with Information Technology teams to ensure security standards are maintained, • Implement technology to proactively scan Information Technology environment for security breaches and suspicious activity, • Continuous improvement in the areas of Information Security technologies, techniques and processes, • Develops and maintains an effective system for the distribution of regular key performance indicator reports and dashboard, • Ability to interpret penetration test results and describe issues and fixes to non-security expert, • Responsible for leading an accurate & comprehensive status reporting to the executive steering committee, • Create and implement SOP/ process improvement initiatives to achieve outcomes that align or exceed the expectations of strategic roadmap Skills & Experience • 8+ years hands-on experience designing or implementing security solutions, including all related documentation and artifacts, • Analytical ability, problem-solving skills, and ability to break down complex problems into actionable steps, • Extensive experience in design and development of enterprise security architectures. Experience must include a wide range of work in creating diagrams and documentation with all components that comprise IT systems including network topology., • Strong knowledge and experience in secure enterprise architecture design, especially with regard to IAM, NDR, EDR, SIEM, AI/ML, and other cybersecurity tools and resultant applications, • Experience selecting effective methods, techniques, and evaluation criteria to achieve desired outcomes, • Previous experience developing architectures, strategies, strategic plans, roadmaps, and technical standards for the federal IT enterprise environment., • Vulnerability Assessment testing and/or Penetration Testing (preferred), • Robotic Process Automation/Intelligent Automation (preferred), • Business case development supporting security technology solutions (preferred), • Additional certifications demonstrating cybersecurity/technical mastery (preferred)

Job Description OEI (O'BRIEN Engineering & Architecture) is looking for a Mechanical Controls Design Engineer to join our team. OEI, a full-service Architecture and Engineering design firm, was founded 38 years ago in Dallas, TX, and serves customers nationwide. We have a robust backlog of vertical and horizontal project types and, across our teams, we serve Federal, Healthcare, Military, and Institutional clients. OEI is honored to be awarded the National Society of American Military Engineers' Robert Flowers Small Business of 2020. A Service-Disabled Veteran Owned Small Business, OEI has a deep backlog of contracting capacity extending well into 2035. So, are you ready to work in a dynamic, challenging, rewarding environment? We invite you to send us your information and let’s visit about how we can team in a way that our best efforts will help build your career, and your best efforts will strengthen OEI and add value to our clients in ways that are measurable, recognized, and appreciated. Key Responsibilities, Requirements, and Misc Of Note: • Building system concepts and documentation process from schematics through construction administration phases., • Experience with central plants, hydronic, steam/ VRF and energy recovery systems., • Working knowledge of building and building system codes (IBC, IECC, IMC, ASHRAE standards and NFPA standards., • Proficient in Revit, building load and energy modeling software (OEI uses Trane Trace 700), Bluebeam, AutoCAD, • Design mechanical systems, air and water side and related controls., • Possess general working knowledge of different mechanical systems; stay up to date on industry advancements including best-practices for applicability., • Supervise the installation of the designed systems and equipment., • Prepare cost estimates, specifications, and design analyses., • Attend client meetings and represent the mechanical interests of the firm., • Bachelor's degree in Mechanical Engineering from an accredited college or university., • 7+ years of experience designing mechanical HVAC systems for commercial buildings, health care and federal projects., • PE License required, LEED accreditation a plus. What makes us unique? • We offer high expertise in a small package, • We are structured to hear, understand, and solve customer problems Benefits: • 401(k) matching, • Dental insurance, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Parental leave, • Professional development assistance, • Referral program, • Retirement plan, • Tuition reimbursement Are you ready to work in a dynamic, challenging, rewarding environment? Let's talk. See how we can partner together in a way that our best efforts will help build your career and your best efforts will strengthen our company in a way that is measurable, recognized, and appreciated. OEI is a Service-Disabled Veteran Owned Small Business (SDVOSB), Texas HUB, and SBE firm. OEI's foundations: teamwork, entrepreneurial mindset (taking ownership of the problem and the solution), continuous improvement, competence, ethical behavior What makes us unique? We offer high expertise in a small package We are structured to hear, understand, and solve customer problems We have a culture of training and employee developmentPrimarily located in North Texas, OEI is a full design services firm with a big company future, and, we are looking for motivated and qualified team players to join us on the journey. We were founded 38 years ago in 1987; today, we serve clients throughout the US and its territories serving on federal, healthcare, military, and institutional projects. We’ve had significant success in winning many large federal contracts, providing a work pipeline that extends well into 2035. We also have a well-established, growing municipal, land development and private practice. OEI is honored as the recipient of the national Society of American Military Engineers' Robert Flowers Small Business of the 2020.\r\n\r\nAre you ready to work in a dynamic, challenging, rewarding environment? Let's talk. See how we can partner together in a way that our best efforts will help build your career and your best efforts will strengthen our company in a way that is measurable, recognized, and appreciated.\r\n\r\nOEI is a Service-Disabled Veteran Owned Small Business (SDVOSB), Texas HUB, and SBE firm.\r\n\r\nOEI's foundations: teamwork, entrepreneurial mindset (taking ownership of the problem and the solution), continuous improvement, competence, ethical behavior\r\n\r\nWhat makes us unique?\r\nWe offer high expertise in a small package\r\nWe are structured to hear, understand, and solve customer problems\r\nWe have a culture of training and employee development

Job Description OEI (O'Brien Engineering & Architecture) is seeking a Senior Electrical Engineer to support facility design projects nationwide, primarily in support of US federal customers (including Veterans Affairs, Army Corps of Engineers, Air Force, Space Force, Homeland Security). OEI has a long, nearly 40-year history and a strong pipeline for growth extending into 2035. • Bachelor's degree in Electrical Engineering or similar from an accredited college or university., • 10+ years of experience designing electrical systems including building automation controls for commercial buildings, health care and federal projects., • Building system concepts and documentation process from schematics through construction administration phases., • Experience with central plants, hydronic, steam/ VRF and energy recovery systems., • Working knowledge of building and building system codes (IBC, IECC, IMC, ASHRAE standards and NFPA standards)., • Proficient in Revit and building load and energy modeling software including SKM, Bluebeam, AutoCAD, • Design support of electrical systems and related controls., • Possess general working knowledge of different electrical systems; stay up to date on industry advancements including best-practices for applicability., • Supervise the installation of the designed systems and equipment., • Prepare cost estimates, specifications, and design analyses., • PE License in a US state required; LEED accreditation a plus., • Medical, vision, dental, • Simple IRA with 3% matching,, • Basic Term Life and Personal Accident Insurance, • Basic Disability Insurance, • Adoption Assistance Program, • Educational Assistance Program, • 9 Paid Holidays in addition to PTOCompany DescriptionPrimarily located in North Texas, OEI is a full design services firm with a big company future, and, we are looking for motivated and qualified team players to join us on the journey. We were founded 38 years ago in 1987; today, we serve clients throughout the US and its territories serving on federal, healthcare, military, and institutional projects. We’ve had significant success in winning many large federal contracts, providing a work pipeline that extends well into 2035. We also have a well-established, growing municipal, land development and private practice. OEI is honored as the recipient of the national Society of American Military Engineers' Robert Flowers Small Business of the 2020. Are you ready to work in a dynamic, challenging, rewarding environment? Let's talk. See how we can partner together in a way that our best efforts will help build your career and your best efforts will strengthen our company in a way that is measurable, recognized, and appreciated. OEI is a Service-Disabled Veteran Owned Small Business (SDVOSB), Texas HUB, and SBE firm. OEI's foundations: teamwork, entrepreneurial mindset (taking ownership of the problem and the solution), continuous improvement, competence, ethical behavior What makes us unique? We offer high expertise in a small package We are structured to hear, understand, and solve customer problems We have a culture of training and employee developmentPrimarily located in North Texas, OEI is a full design services firm with a big company future, and, we are looking for motivated and qualified team players to join us on the journey. We were founded 38 years ago in 1987; today, we serve clients throughout the US and its territories serving on federal, healthcare, military, and institutional projects. We’ve had significant success in winning many large federal contracts, providing a work pipeline that extends well into 2035. We also have a well-established, growing municipal, land development and private practice. OEI is honored as the recipient of the national Society of American Military Engineers' Robert Flowers Small Business of the 2020.\r\n\r\nAre you ready to work in a dynamic, challenging, rewarding environment? Let's talk. See how we can partner together in a way that our best efforts will help build your career and your best efforts will strengthen our company in a way that is measurable, recognized, and appreciated.\r\n\r\nOEI is a Service-Disabled Veteran Owned Small Business (SDVOSB), Texas HUB, and SBE firm.\r\n\r\nOEI's foundations: teamwork, entrepreneurial mindset (taking ownership of the problem and the solution), continuous improvement, competence, ethical behavior\r\n\r\nWhat makes us unique?\r\nWe offer high expertise in a small package\r\nWe are structured to hear, understand, and solve customer problems\r\nWe have a culture of training and employee development

Job Description Summary of Position: The I&E Engineer is responsible for the design, installation, maintenance, and optimization of instrumentation and electrical systems that support oil and gas production operations. This role ensures that all I&E systems function safely, efficiently, and in compliance with regulatory standards. The engineer will collaborate with field operations, project engineers, automation specialists, and third-party contractors to support both brownfield modifications and new capital projects. Primary Job Responsibilities: • Design and oversee the implementation of instrumentation, controls, and electrical systems for oil & gas facilities, including well sites, compression stations, tank batteries, and processing plants., • Lead the development and management of overhead electrical and primary power infrastructure, including power system studies, transformation, pole-line design, load calculations, and utility coordination., • Develop, configure, and troubleshoot control system programming (PLC, SCADA, RTU) to support production optimization and operational reliability., • Support the selection, specification, and integration of field instruments, control systems, MCCs, VFDs, and power distribution equipment., • Develop and review detailed engineering documentation, including P&IDs, cause and effect diagrams, control narratives, loop drawings, wiring diagrams, one-line diagrams, panel layouts, and PLC logic., • Conduct field inspections to validate that I&E and primary power systems are installed per design specifications, functional requirements, and safety codes., • Collaborate with Project Managers and Field Technicians to maintain and optimize facility control systems, communications, and power delivery networks., • Ensure compliance with NEC, IEEE, NESC, API, ISA, and other applicable standards, including hazardous area classifications and electrical safety regulations., • Provide technical leadership for power reliability improvement initiatives, including voltage drop mitigation, fault current analysis, and protective device coordination., • Assist in developing scopes of work, budgets, schedules, and contractor oversight for I&E and power-related projects., • Strong knowledge of field instrumentation, motor control systems, control panel design, and low to medium voltage power distribution., • Working experience with overhead electrical distribution systems and primary power utility coordination., • Proficiency in PLC and SCADA programming (Allen-Bradley, Schneider, Siemens, etc.)., • Ability to read and develop electrical schematics, P&IDs, loop diagrams, and control logic diagrams., • Familiarity with NEC, NESC, NFPA 70E, API 500/505, and hazardous area electrical classification., • Skilled in troubleshooting electrical and control systems in field environments., • Bachelor’s degree in Electrical Engineering, Instrumentation Engineering, or related discipline., • Work Location: Work is performed at both field and office locations., • Schedule: Traditional 40-hour workweek or an alternative schedule of 9-hour workdays Monday through Thursday and 4-hour workdays on Friday, as business needs allow and with manager approval., • Travel required to the Civitas field locations., • Comprehensive healthcare coverage including medical, dental, and vision insurance., • Dental and Vision insurance premiums are at no cost to employees., • Generous 401(k) Retirement Plan with a 6% company match. 100% vest of employer contributions after the first month of employment., • Company paid Life & AD&D insurance., • Voluntary Life, AD&D, Accident, and Critical Illness plans., • Vacation, sick, volunteer, and holiday pay., • Health Saving Accounts (with an employer contribution) and Flexible Spending Accounts., • Fitness and tuition reimbursements., • Opportunity for Short Term and Long-Term Incentives., • Company paid short-term and long-term disability programs., • Paid parental leave., • Volunteer opportunities through The Civitas Community Foundation., • Employee assistance program., • Your choice of paid parking or an RTD EcoPass for Denver-based employees. Please note that the following job posting does not guarantee or promise specific benefits offerings to potential employees. While we strive to provide competitive compensation and benefits packages, the availability and details of these offerings are subject to change and are ultimately determined by company policies and budgetary considerations. We encourage all applicants to review our official employee benefits documentation and engage in discussions with our HR representatives during the interview process to gain a comprehensive understanding of the benefits package available for the position. Physical Requirements: The physical demands described here are representative of those that must be met by this position to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. AMOUNT OF TIME None Under 1/3 1/3 to 2/3 Over 2/3 Stand ☐ ☐ ☐ ☐ Walk ☐ ☐ ☐ ☐ Sit ☐ ☐ ☐ ☐ Use hands & fingers ☐ ☐ ☐ ☐ Reach with hands & arms ☐ ☐ ☐ ☐ Climb or balance (includes ladders) ☐ ☐ ☐ ☐ Bending, kneel, squatting or crawling ☐ ☐ ☐ ☐ Talk or hear ☐ ☐ ☐ ☐ Wear personal protective equipment. (e.g. respirator, fire resistant clothing) ☐ ☐ ☐ ☐ Weight Lifted ☐ Up to 10 lbs. ☐ Up to 25 lbs. ☐ Up to 50 lbs. ☐ Up to 100 lbs. ☐ More than 100 lbs. Work Environment: The work environment characteristics described here are representative of those this position may encounter while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. AMOUNT OF TIME None Under 1/3 1/3 to 2/3 Over 2/3 Work near moving mechanical parts ☐ ☐ ☐ ☐ Work in high, precarious places ☐ ☐ ☐ ☐ Fumes or airborne particles ☐ ☐ ☐ ☐ Toxic or caustic chemicals ☐ ☐ ☐ ☐ Outdoor weather conditions (heat & cold) ☐ ☐ ☐ ☐ Loud Noise (conveyor systems, mechanical equip, etc.) ☐ ☐ ☐ ☐ Note: This job description is intended to convey information essential to understanding the scope of the job and the general nature and level of work performed by job holders within this job. However, this job description is not intended to be an exhaustive list of qualifications, skills, efforts, duties, responsibilities or working conditions associated with the position. Civitas Resources offers of employment take into consideration a candidate’s education, training, and experience, as well as the position's work location, external market, and internal value, including seniority and merit systems, and internal pay alignment when determining the salary level for potential new employees. Civitas Resources is an equal opportunity employer. We value and encourage diversity in our workforce and provide equal employment opportunities to all individuals regardless of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by applicable laws. Base Pay Range: $205,000 - $230,000 Application Deadline: Applications will be reviewed on a rolling basis and this position will remain open until filled. Notice To Third Party Agencies: Civitas does not accept unsolicited resumes from recruiters, employment agencies, or other staffing services. Unsolicited resumes include any resume or hiring document sent to Civitas in the absence of a signed Service Agreement where Civitas has expressly requested recruitment/staffing services specific to the position at hand. Any unsolicited resumes, including those submitted to hiring managers or other business leaders, will become the property of Civitas and Civitas will have the right to hire that candidate without reservation – no fee or other compensation will be owed or paid to the recruiter, employment agency, or other staffing service.

Job Description Start your Warwick Journey and help preserve a beautiful piece of Dallas History! Our Maintenance team is in search of experienced persons to join their team. Our team is focused on keeping our Historic Dallas Landmark in great condition. Expectations include but are not limited to understanding of equipment and systems found in a hotel, routine maintenance of all public spaces, meeting rooms, guest rooms and grounds, and completing repairs and replacement of any equipment necessary. POSITION PURPOSE Maintain the entire hotel facility, including the physical building structure, all mechanical, electrical, HVAC systems, and related equipment in accordance with energy conservation and preventative maintenance programs. Ensure the upkeep of guest areas to maintain an attractive hotel. ESSENTIAL FUNCTIONS Complete work orders and visually assess the safe and efficient maintenance and operation of the physical structure(s) of the hotel, all mechanical, electrical, HVAC systems and any other related equipment. Completion of all routine maintenance on public spaces, meeting rooms, ballrooms, outlets, back of the house spaces, and grounds. Completion of all repairs, replacement, and renovation projects to offices and employee work areas. Adhere to all corporate-required purchasing policies and controls, including, but not limited to, all outside contractor bids, budgets, and schedules. Follow prescribed safety procedures for personnel and equipment by the company and OSHA. Work with the Chief Engineer to maintain effective Energy Management and Preventive Maintenance programs and conduct special training for other operating departments on the safe and efficient use of equipment and energy in the hotel. Inform the General Manager and hotel department heads on a regular basis regarding the specific and overall condition of the building structure(s), related systems, and equipment offering prudent, cost effective proposals for maintaining these systems. Access and input information into a computer and generate reports (if applicable). Regular attendance in conformance with the standards, which may be established from time to time, is essential to the successful performance of this position. Employees with irregular attendance will be subject to disciplinary action, up to and including termination of employment. Due to the cyclical nature of the hospitality industry, employees may be required to work varying schedules to reflect the business needs of the hotel. In addition, attendance at all scheduled training sessions and meetings is required. Upon employment, all employees are required to fully comply with hotel rules and regulations for the safe and effective operation of the hotel facilities. Employees who violate hotel rules and regulations will be subject to disciplinary action, up to and including termination of employment. SUPPORTIVE FUNCTIONS In addition to performance of the essential functions, this position may be required to perform a combination of the following supportive functions, with the percentage of time performing each function to be solely determined by the manager based upon the particular requirements of the hotel: Make necessary repairs and maintenance throughout the hotel. Prepare technical data, bidding, project work, alterations, and repairs for properties. Must have basic knowledge of building codes. Actively train in fire prevention, environmental health and safety and engineering systems. Attend morning walk arounds as required. SPECIFIC JOB KNOWLEDGE, SKILLS AND ABILITIES The individual must possess the following knowledge, skills and abilities and be able to explain and demonstrate that he or she can perform the essential functions of the job, with or without reasonable accommodation, using some other combination of knowledge, skills and abilities: Must be able to speak, read, write and understand the primary language(s) used in the workplace. Must be able to read and write to facilitate the communication process. Most tasks are performed in a team environment with the employee acting as a team leader. There is minimal direct supervision. Knowledge of all types of mechanical equipment such as chillers, boilers, water softeners, and refrigeration equipment is preferred Knowledge of plumbing and electrical systems, maintenance of records of power, water and fuel consumption is preferred Full time employees are eligible for medical, dental and vision insurance in addition to supplemental plans. The hotel provides complimentary meal and parking for al employees. Le Spa by Warwick also offers a 50% discount on all treatments and 30% of products.

Job Description Summary Our client is a leading and established IT Solutions Firm in the Arlington, TX area that is seeking a professional Senior Systems Engineer to join their team. This position will consult, design, and implement IT advanced solutions. This position will also troubleshoot complex problems and mentor junior team members while being on a specific track towards CIO level consultancy. As an IT organization, they work on the latest technology from the top IT solution manufacturers and bring those technologies to solve their clients challenges and help them find strategic direction.If you are seeking to advance your career in a big way, then this just might be the opportunity that you've been seeking. This is truly a unique role for the right person. If you have strong engineering experience and desire to train under the direct mentorship of a CIO and guided interaction with an experienced CEO, this is a great opportunity. Learn more about ROI, risk management, and strategic planning. Stay ahead of the technology curve and keep your skills relevant while sharpening your business acumen. Duties & Responsibilities • Project Management, • System Design, • Working with technology vendors, • Consulting and deployment of server and network solutions., • Client Strategical Plan Development, • Advanced diagnostic and remediation of server and network solutions., • Write clear and concise documentation and instructions., • Ability to manage and prioritize multiple tasks in fast paced environment., • Participate in on-call rotation., • Extensive knowledge of Active Directory and Windows Server Technologies (Windows Server, Exchange, RDS, SQL, IIS ), • Experience with cloud technologies (Azure, O365, AWS, Google, G-Suite ), • Experience with diagnostic, repair and installation of server and network systems., • In-depth working knowledge of virtualization including VMWare, Nutanix, SANS and clustering., • In-depth knowledge of networking technologies including TCP/IP, VLANS, routing, switches, firewalls, DNS, VPN, and VoIP. (Cisco, Fortinet, Sonicwall), • Working knowledge of security policies and NIST controls., • Mastery and certified in one or more of the following:, • Microsoft Servers, Fortinet, Cisco, VMWare, Nutanix, Windows Server, Storage Networking, • Education:Bachelors degree required, • Experience: 5+ Years systems design, administration, installation, and troubleshooting, • Preferred Certifications:, • MCSA Server or MCSE, • Cisco, • Fortinet, • VMWare, • NutanixEmployment Type: Full time Location: Dallas, TX

Job Description Johnstone Supply, North Americas leading wholesale distributor of HVACR equipment, parts, and supplies has a great opportunity for a D365 Data Migration Specialist to join our team. Over the last seven decades Johnstone has grown into the industry leader with over 450 distributor branches and 6 distribution centers throughout North America resulting in over $4 billion in annual sales. We work with some of the largest companies in the world, including Daikin/Goodman, Honeywell, Emerson, Johnson Controls, Google and Fujitsu, to provide contractors with world class products, technical expertise and quality service. As a member of the IT Team, the D365 Data Migration Specialist is a key contributor to the ERP transformation initiative, and will partner closely with system integrators, IT, and business stakeholders to lead the clarification, alignment, and translation of data requirements and sources. This role supports the design and execution of effective data migration strategies from legacy systems to new enterprise platforms, ensuring data integrity, accuracy, and successful deployment. Now is the best time to join Johnstone Supply. The individual selected for this role will join a top industry leader and gain exposure to critical infrastructure supporting a major fully funded ERP transformation, own critical environments, and develop their skills with cutting-edge Microsoft Azure and Dynamics 365 F&O technologies. This position has a hybrid schedule, requiring at least 2-days in the office, and must be based in the Dallas-Fort Worth, Texas metro area. Position responsibilities: • Responsible for translating complex procurement and demand planning requirements into scalable, efficient, and compliant system configurations across core Dynamics 365 Supply Chain Management modules, including Procurement and Sourcing, Product Information Management, Vendor Collaboration, Demand Forecasting, Master Planning, and Inventory Management., • The Data Migration Specialist works closely with the Dynamics 365 ERP implementation team to ensure the accurate and seamless migration of data across key business processes, including Record-to-Report (R2R), Procure-to-Pay (P2P), and Order-to-Cash (O2C), maintaining data integrity and alignment throughout the D365 Finance and Operations environment., • Facilitates and drives collaboration with stakeholders throughout the organization to ensure a comprehensive set of requirements to design and implement configurations, customizations, extensions, and integrations within the Microsoft Dynamics 365 Finance & Operations platform., • Work with business analysts and stakeholders to understand business requirements and translate them into technical specifications and solutions. Engage with a range of users to understand their needs, recommend best practices, perform fit/gap analysis, design solutions, oversee end-user training on the functionality, and deploy solutions in the ERP., • Provide higher level support and troubleshooting for Dynamics 365 F&O modules, resolving issues related to functionality, performance, and integration, that may need specialization to resolve. Strong analytical and troubleshooting skills to resolve complex technical issues., • Collaborate with system implementor, developers, and architects to design robust, scalable, and maintainable solutions based on D365 best practices., • Configure and customize D365 modules to meet business-specific requirements, ensuring adherence to best practices and performance standards., • Bachelor’s degree (B.A./B.S.) from four-year college or university; 10 or more years of related experience and/or training; or equivalent combination of education and experience., • Experience with multi-site warehouse operations, multi-entity supply chain models, and distribution networks—supporting accurate integration with procurement, transportation, and order fulfillment processes., • Preferred certifications include:, • Microsoft Certified: Dynamics 365 Data Analyst Associate or relevant Power Platform certifications., • Certifications in data governance, migration, or ETL tools., • Experience with Data Management Framework (DMF)., • Data migration certifications such as Microsoft Certified: Azure Data Engineer Associate and DAMA Certified Data Management Professional (CDMP)., • At least 5 years of experiencein data migration and systems integration, specializing in planning, executing, and optimizing migrations across ERP, CRM, and business systems. Proven track record managing full-cycle migrations from legacy to modern platforms, ensuring data integrity, accuracy, and successful go-live., • Data Migration Strategy & Planning: Leading end-to-end migrations from legacy ERP, CRM, and custom systems to cloud and on-premise enterprise platforms., • Data Mapping & Transformation: Defining mapping, transformation logic, and cleansing rules for accurate, high-quality migrations., • Data Quality & Validation: Conducting profiling, quality assessments, and post-migration validation to ensure business continuity., • ETL & Integration Tools: Hands-on experience with SSIS, Azure Data Factory, Syniti, MuleSoft, and D365 Data Management Framework; skilled in API-based integrations., • ERP/CRM Platforms: Experience migrating data to SAP, Oracle, Microsoft Dynamics 365, Salesforce, Workday, and NetSuite., • Data Governance & Compliance: Ensuring adherence to security, privacy (GDPR, CCPA), and audit requirements during migrations., • Stakeholder Collaboration: Partnering with IT, business analysts, functional teams, and vendors to align migration plans with business goals., • Testing & Validation: Leading user acceptance testing (UAT), performance testing, and post-migration support to confirm data meets operational standards., • Automation & Optimization: Implementing automated migration processes to improve efficiency and reduce errors., • Ensuring data accuracy and compliance through internal controls, approval workflows, and audit trail configurations ., • Proven ability to support digital transformation initiatives and financial system implementations with a focus on quality, compliance, and operational efficiency., • Strong knowledge of Power Platform, Power BI, and other Microsoft technologies., • Experience with data migration tools and techniques., • Knowledge of procurement controls, supply chain compliance frameworks, and applicable regulatory standards (e.g., SOX for supply chain operations and vendor management)., • Strong organizational skills, with the ability to structure and manage complex sourcing, planning, and replenishment processes, and to prioritize across multiple supply chain initiatives., • Demonstrated ability to manage ambiguity, resolve cross-functional conflicts, and maintain operational continuity during system or process transitions., • Proven track record of taking initiative to identify data quality issues, recommend solutions, and drive results through to resolution., • Ability to work effectively under pressure in tight project timelines, particularly during data validation, cutover, and go-live phases., • Proven ability to take initiative and drive results, especially in identifying and implementing supply planning and procurement improvements aligned with business objectives., • Capable of performing under tight deadlines and high-pressure environments, especially during planning cycles, supplier negotiations, and ERP cutovers., • Ability to collaborate across procurement, planning, finance, operations, and IT teams, as well as with external vendors and partners, to ensure process alignment and data integrity., • Skilled in communicating complex supply chain requirements and system changes to both technical and non-technical stakeholders, including presenting insights and recommendations to leadership., • Safety: Always prioritizes safety, both at work and at home, while ensuring those who work for you work safely., • Customer Focused: Take the perspective of those we serve, anticipate their needs, and responding quickly., • One Team: We win together by collaborating with each other, focusing on the common goal, and leveraging the strengths of the team., • Own It: Take the initiative, act with a sense of urgency and pride, do things right the first time, and always act with integrity. Visit our website for more information about our growing company. EOE & E-Verify Participating Employer. #JSTNP5

Job Description About the Company We’re a fast-scaling $10M/year business that places virtual assistants and runs multiple revenue streams: coaching, licensing, subscription, and fulfillment. Funnels are converting. Sales are flowing. Teams are growing. But we’ve outgrown instinct. We’re building for scale — and we need a CFO who can engineer financial clarity without slowing momentum. Financial Tracking is all custom built internally and ready to enter into the next chapter of organization and cohesivness amongst departments and tracking systems. Company's current finance department has no team lead and is an org of 5+ all with 4+ year history at the company. Who This Role is Built For You’re not just a numbers person. You’re a strategic operator with a mind for forecasting, margin growth, and scalable cash flow. You thrive in fast-moving environments and don’t wait around for permission to make things better. Systems will need to be re built and restructured for more efficiency and preparation for a double in growth. In This Role, You Will: * Own all financial planning, budgeting, and forecasting * Build clear, real-time dashboards and reporting for execs and department heads * Lead cash flow management, scenario modeling, and long-term financial planning * Optimize team structure, compensation plans, and spending across departments * Partner with the CEO on growth models for licensing, subscriptions, and coaching * Oversee all finance functions: accounting, controls, tax, and financial systems * Guide equity, profit share, reserve, and investment conversations with full transparency * Ability to run two divisions finances within one core company * Big focus on AR collection * Ability to help lead payroll projections for 500+ foreign employees on track to hit 8,000 employees by end of 2026 What You Bring to the Table * 5+ Years Previous Experience * Preferred past experience with companies of 500+ Employees * Prior Experience working with International Locations * Experience as a financial leader or strategic #2 in a $10M–$50M company * Strong track record of building or revamping finance departments * Fluency in forecasting, modeling, and scenario planning * Background in services, SaaS, coaching, or agency-style businesses * Ability to work closely with sales and marketing leadership (not just ops) * Familiarity with CAC, LTV, ROAS, gross margin, and other key growth metrics * Experience managing bookkeepers, CPAs, controllers, and banking partners * Bonus: You’ve worked inside founder-led, growth-driven teams What Success Looks Like * Clean, accurate, and timely financials * Reliable cash flow forecasting and strategic runway visibility * Strong margin improvement across departments * Smart, scalable hiring tied to revenue milestones * Strategic guidance that enables fast decision-making — and avoids costly ones * A finance function that becomes a competitive edge, not a bottleneck This Role Is Not For You If: * You’ve only worked in traditional finance or legacy orgs * You need months to "ramp up" before contributing * You avoid hard conversations about money, margin, or budgets * You prefer remote work or avoid in-person leadership * You wait to be handed a budget rather than build one What You’re Walking Into * A $10M+ business with working revenue engines, product-market fit, and rapid scale * Multiple business models: recurring, high-ticket, licensing, affiliate * A leadership team that moves fast and wants real-time data, not month-late reports * Full freedom to build your ideal finance department — systems, hires, tech, and reporting * A CEO who sees the CFO as a co-pilot, not a compliance cop Compensation & Benefits * Competitive base salary * Performance-based bonuses * Relocation support if you're the right fit * Full authority to build the finance team and systems as needed Location Requirement This is a full-time, in-office role based in Dallas, TX. Remote or hybrid is not available for this position. Ready to Lead the Financial Strategy of a Rocket Ship? Apply now if you're ready to lead, shape, and scale a high-growth business from the inside. The Variance in Comp comes from our willingness too look at a few different angles for the position. To push into mid tier or higher end of comp, we need to see track record in very specific skill sets in terms of Recurring Revenue Modeling, Companies of 50+ Million in Scale as well handling whole company financials for employees counts of 250+ People with minimal outside assistance.

Job Description We are looking for a DevOps Engineer to help us build functional systems that improve customer experience. The DevOps Engineer will manage development teams and provide experienced oversight to develop our clients critical tools and networking/cloud capabilities. You will have the opportunity to apply DevOps techniques to emerging cloud technology and influencing the next generation of innovative networking while designing the cybersecurity defenses for this emerging environment. As a technical lead, you'll work with the team to meet the most demanding challenges of 21st Century computing and cybersecurity. You will execute and automate operational processes fast, accurately and securely. Responsibilities • Implement integrations requested by customers, • Deploy updates and fixes, • Provide Level 2 technical support, • Build tools to reduce occurrences of errors and improve the customer experience, • Develop software to integrate with internal back-end systems, • Perform root cause analysis for production errors, • Investigate and resolve technical issues, • Develop scripts to automate visualization, • Design procedures for system troubleshooting and maintenance Requirements • Execute software builds & deployments, • Coordinate, manage, and perform production releases, • Coordinate with multiple teams to ensure application environment is working properly, • Automate repetitive tasks including system builds, configuration and application installation processes, • Coordinate escalation of issues/risks and remove impediments, • Initiate infrastructure setup for new and upcoming applications, • Write build scripts and automate the deployments for new applications, • Submit Change/Incident Management Tickets, coordinate & obtain approvals, • Implement standards, processes, & controls for release & deployment activities in DevOps space, • Take ownership and act with high sense of urgency, • Manage AWS cloud adoption initiatives, Deploy applications in AWS Cloud environment, • Participate in planning and implementation of infrastructure on Amazon Web Services (AWS), migrate existing applications to AWS cloud, • 2+ years of experience in DevOps, Configuration and Release Management roles, • Familiarity with artifact repository tools (SVN, Git, Nexus, etc.), software build-tools (Maven, ANT, Shell, Gradle), and continuous integration tools (e.g. Jenkins, AWS Code-Pipeline), • Working experience in Unix environment, basic shell scripting, • Ability to work collaboratively and independently, • Ability to modify or author implementation/back-out plans, best practice documents, and scripts which can be understood and used by others., • AWS Cloud experience a plus

Job Description About Us Clayco is a full-service, turnkey real estate development, master planning, architecture, engineering, and construction firm that safely delivers clients across North America the highest quality solutions on time, on budget, and above and beyond expectations. With $7.6 billion in revenue for 2024, Clayco specializes in the "art and science of building," providing fast track, efficient solutions for industrial, commercial, institutional, and residential related building projects. About Clayco Design and Engineering Clayco Design and Engineering (CDE) was created to diversify and grow Clayco's industrial business unit's capabilities with a focus on efficiently delivering robust design-build architectural and engineering solutions. The Clayco Design and Engineering team brings a tremendous amount of engineering expertise to the Clayco enterprise from a wide array of industrial segments such as food & beverage, consumer products, manufacturing, and life-science products. The Role We Want You For We are seeking a Senior Controls Engineer – Mission Critical to lead the design, development, and implementation of Building Management Systems (BMS), Industrial Control Systems (ICS), and Supervisory Control and Data Acquisition (SCADA) systems for mission-critical projects. The ideal candidate will have extensive experience with automation, PLCs, control network architecture, and system integration in high-reliability environments such as data centers, pharmaceutical plants, and industrial facilities. The Specifics of the Role • Design, program, and commission automation and control systems for mission-critical projects., • Develop PLC, HMI, and SCADA architectures to support complex facility operations., • Integrate Building Management Systems (BMS), Electrical Power Monitoring Systems (EPMS), and Industrial Control Systems (ICS) into mission-critical environments., • Perform network architecture design for control systems, including cybersecurity best practices., • Work closely with electrical, mechanical, and IT teams to ensure seamless system integration., • Conduct system testing, validation, and troubleshooting during commissioning and operational phases., • Manage vendor and subcontractor relationships to ensure control systems meet performance specifications., • Stay current with emerging technologies in automation, IoT, and AI-driven control systems to enhance operational efficiency and resilience., • Bachelor's degree in Electrical Engineering, Computer Engineering, Mechanical Engineering, or a related field., • 10+ years of experience in controls engineering, with at least 5 years in mission-critical environments (data centers, pharma, advanced manufacturing, etc.)., • Expertise in PLC programming (Allen-Bradley, Siemens, Schneider, etc.), SCADA/HMI development (Ignition, Wonderware, Rockwell FactoryTalk, etc.), and network communication protocols (Modbus, BACnet, OPC, etc.)., • Strong knowledge of power monitoring systems (EPMS), industrial automation, and cybersecurity best practices for control systems., • Experience with programming and configuring automation platforms for real-time monitoring and predictive maintenance., • Familiarity with NFPA, ISA, NIST, and industry standards related to automation and control in mission-critical environments., • Excellent problem-solving, leadership, and communication skills., • No other builder can offer the collaborative design-build approach that Clayco does., • We work on creative, complex, award-winning, high-profile jobs., • 2024 Best Places to Work – Crain's Chicago Business, St. Louis Business Journal, Los Angeles Business Journal, and Phoenix Business Journal., • 2024 ENR Midwest – Midwest Contractor (#1)., • 2024 ENR Top 100 Design-Build Firms – Design-Build Contractor (Top 5)., • 2024 ENR Top 100 Green Contractors – Green Contractor (Top 5). Benefits • Discretionary Annual Bonus: Subject to company and individual performance., • Comprehensive Benefits Package Including: Medical, dental and vision plans, 401k, generous PTO and paid company holidays, employee assistance program, flexible spending accounts, life insurance, disability coverage, learning & development programs and more! Compensation • The salary range for this position considers a wide range of factors in making compensation decisions including but not limited to: Education, qualifications, skills, training, experience, certifications, internal equity, and location. Compensation decisions are dependent on the facts and circumstances of each case.

Job DescriptionPOSITION RESPONSIBILITIES Healthpeak is seeking a Real Estate Administrator to assist in directing and coordinating activities of on-site outpatient medical property management. This person will assist in effectively implementing procedures, cost controls and policies; maintain good tenant and client/owner relations; assist property management team in maintaining invoice records and contacting vendors/setting up accounts. Job responsibilities include but are not limited to: • Answer management phones and assist with tenant needs., • Respond to inquiries by providing routine information and or taking and delivering messages., • Receive, distribute, and review all purchase orders, track purchase orders in Workspace, alert management of any problems or unresolved purchase orders, and run monthly reports., • Coordinate special events such as holiday events/parties, welcome lunches, book fairs, blood drives, food drives etc., • Maintain inventory of office supplies and property staff directory., • Monitor outside vendors for compliance of contracts and certificates of insurance., • Assist with preparing and administering service agreements., • Establish and maintain record keeping and filing systems; classifies, sorts and files correspondence for tenant files and other documents., • Responsible for accounts payable, accounts receivable and reporting., • Organize and code invoices., • Assist Chief Engineer with update of electrical analysis worksheet as utility invoices are received., • Responsible for issuing Purchase Orders (POs), tracking, and assigning the POs to invoices as they are processed for payment., • Compiling and reviewing Tenant Billings and other miscellaneous charges., • Provide management team with aged delinquency reports and send delinquency letters.POSITION REQUIREMENTS, • Must have a minimum high school education. Associate’s or Bachelor’s degree preferred., • Minimum of 2 years previous commercial property management experience., • Experience with MRI and Yardi software., • Previous experience in real estate accounting and familiarity with monthly accounting cycle, including an understanding of A/P, A/R, and commercial leases., • Possess professional demeanor and excellent interpersonal and customer service skills., • Have access to reliable transportation and maintain a valid driver's license., • Computer literate and proficient in MS Word, Excel, PowerPoint, Outlook., • Excellent communication skills, both verbal and written. 9h5TkQ59yX

Job Description Job Overview We are seeking an experienced Controls Engineer with Aveva Intouch software experience for field service operations nationwide. The ideal candidate will have extensive experience in industrial automation, control systems implementation, and managing automation projects. Responsibilities • Design, implement, and optimize industrial control systems and automation solutions at customer locations, • Lead project teams in planning, executing, and delivering automation projects, • Program and troubleshoot PLCs, HMIs, and industrial networks, • Develop and maintain control system documentation and specifications, • Perform system upgrades and modifications to existing automation systems, • Commission new control systems and equipment, • Work with customers to define project scope and requirements, • Manage project timelines, resources, and budgets, • Train customer personnel on system operation and maintenance, • Travel to customer sites across the United States Required Qualifications • 2+ years experience in industrial automation and controls, • Proficient in PLC programming (Allen Bradley, Siemens), • Strong understanding of industrial electrical systems, • Valid driver's license and ability to travel extensively Desired Qualification (not required) • Aveva Intouch (Wonderware) or comparable software experience Physical Requirements • Ability to lift and handle equipment up to 50 pounds, • Capable of standing, bending, and working in various positions for extended periods, • Comfortable working in manufacturing environments, • Valid passport for occasional international travel We Offer • Competitive rate based on experience, • Per diem and travel expenses, • Comprehensive benefits package including health, dental, and vision insurance, • 401(k) retirement plan with company match, • Company rental vehicle allowance, • Professional development and certification reimbursement, • Paid training opportunities

Job Description Union Technologies is reindustrializing America’s defense manufacturing base with a first-of-its-kind Factories-as-a-Stockpile™ model, integrating advanced robotics, manufacturing, and software into sovereign factory systems at scale. Headquartered in Dallas, Texas, UNION is dedicated to restoring America’s industrial strength and guaranteeing deterrence for the century ahead. We recently emerged from stealth with $50M in funding led by top-tier venture investors and strategic partners. Read more in our Press Release Job Summary We are seeking a Senior / Lead Automation Engineer to architect, implement, and continuously refine full‑scale automation solutions across our advanced manufacturing operations. You will own the automation roadmap—from concept and capital justification through deployment, ramp, and lifecycle optimization—driving safety, productivity, and quality at enterprise scale. Key Responsibilities: Automation Strategy & Roadmap • Define multi‑year automation vision aligned with business objectives and CapEx plans., • Prioritize high‑impact projects using ROI, risk, and throughput models., • Present strategic proposals to executive leadership and investors. System Design & Integration • Lead end‑to‑end design of robotic cells (e.g., Fanuc, ABB, KUKA) and custom machines for welding, machining, material handling, inspection, and packaging., • Specify PLCs, HMIs, motion control, and safety systems; author URS and functional specs., • Oversee vendor selection, FAT/SAT, and site acceptance. Operational Excellence & Continuous Improvement • Drive OEE, cycle‑time, and yield improvements through data analytics and iterative tuning., • Implement predictive maintenance, IIoT, and machine‑learning initiatives. Compliance & Leadership • Mentor a team of controls engineers, technicians, and external integrators., • Cultivate a culture of disciplined experimentation—“measured power, intelligently applied.”, • Lead by example, - go to the factory floor and show team members how to solve difficult problems by creating solid architecture and writing good code. Minimum Qualifications * B.S. in Electrical, Mechanical, Mechatronics, or Controls Engineering (M.S. preferred). * 10+ years progressive experience in automation, robotics, or advanced manufacturing; 5+ years in a lead or staff‑level role. * Expert in at least one major robot platform (Fanuc, ABB, KUKA, Yaskawa) and one PLC family (Allen‑Bradley, Siemens). * Strong grasp of OT networking (EtherNet/IP, Profinet, OPC UA) and MES/SCADA integration. * Proven leadership of cross‑functional teams and external integrators. * Excellent communication skills—able to translate technical detail into business impact for executives and investors. Preferred / Bonus Skills * Experience in defense or aerospace manufacturing environments (AS9100, ITAR). * Familiarity with metal forging manufacturing, machine vision, or AI‑driven process control. * PMP or equivalent project‑management certification. #LI-UNION Join the mission. We'll handle the move. Exceptional talent shouldn't be bound by geography. If you're ready to relocate to Dallas, TX and join us in reindustrializing America’s defense backbone, we'll make it easy—and for those who move quickly, additional incentives may be available. Compensation Range: $115K - $232K

Job Description Senior Controls Software Engineer to Drive PLC & Robotics Automation - Dallas, TX Are you ready to take your career to the next level by designing innovative software solutions for large-scale automated assembly? We're on the lookout for a dynamic Senior Controls Software Engineer to join our talented team! If you're someone who loves diving into complex challenges and working independently on exciting new projects, this is the perfect opportunity for you. In this role, you won't just be writing code; you'll be crafting seamless automated solutions that are the driving force behind our operations. We value problem-solvers who are eager to make a real impact and contribute to our success. If that sounds like you, we can't wait to welcome you aboard! Why should you apply here? • Successful 25+ year old firm, • Large domestic and global clients, • Factory automation, Robotics, Device Control Systems, • Staff of 25 Engineers in this business unit, 16 Software Engineers, • High employee retention rate, • No-cost medical insurance for employee and family coverage What will you be doing? • Build new software for complex control systems, • Software development for low-level device drivers to application-level, • Work with motion control and robotics, • The language used depends on the project: C, C++, and C#, • New development, customized, and iterative, • Work on Siemens or Allen Bradley PLCs, • Collaborate with various corporate technical teams, including cross-functional, • Works directly with the customer to troubleshoot and solve critical problems within the automation system, • Ensure timely response and resolution to customer issues, • 30 % travel to customer sites domestically, and some travel to Europe What are the minimum qualifications? • Bachelor of Science in Electrical, Computer Engineering, Mechanical, Mathematics, etc., • Senior-level software development skills, full cycle, • Must have designed PLC Systems from scratch, • Must have experience with PLCs (Siemens and Allen Bradley) and HMI, • Must have had experience with hand tuning PID Loops and tuning motors, • Experience with a combination of languages, Ladder Logic, C, C++, and C#, preferably two of the three, • Experience programming software to control devices, • Excellent oral and written communication skills are a must What will make your résumé stand out? • Experience in factory automation or control systems, • Device driver experience, • Self-starter, able to work independently, act and deliver results, and exercise a high level of judgment Location: 100% on-site. Headquarters in Dallas, TX Relocation: Assistance offered Citizenship: U.S. Citizens. If necessary, you may need to get a DOD security clearance Salary: 130k - 150k, Paid Overtime for travel (10k - 20k), 401k matching is 6%. Fully paid medical insurance for employees and dependents

Job DescriptionCompany Description CRB is a leading provider of sustainable engineering, architecture, construction and consulting solutions to the global life sciences and food and beverage industries. Our more than 1,100 employees provide best-in-class solutions that drive success and positive change for our clients, our people and our communities. CRB is a privately held company with a rich history of serving clients throughout the world, consistently striving for the highest standard of technical knowledge, creativity and execution. Job Description We are seeking a highly experienced Lead Electrical Engineer to oversee electrical design and engineering execution across diverse and complex projects. This role involves managing discipline-level budgets, directing design workflows, and mentoring engineering teams from entry-level to senior staff. You will collaborate with internal and external stakeholders to ensure seamless integration of electrical systems into the built environment. You will lead the design of power distribution, lighting, grounding/bonding, special systems (e.g., telecom/data, security, fire alarm), and electrical controls. The ideal candidate will demonstrate strong leadership, technical expertise, and project management capabilities. Key Responsibilities • Lead and manage electrical design teams across all project phases—from concept to construction administration., • Develop and oversee electrical system designs that meet code requirements and client specifications., • Coordinate with architects, engineers, construction managers, vendors, and manufacturers., • Prepare and review technical documentation including one-line diagrams, load calculations, specifications, and installation details., • Utilize BIM and CAD tools for modeling and documentation., • Conduct field surveys and resolve non-compliant conditions., • Mentor junior engineers and contribute to internal training programs., • Manage project budgets and schedules for the electrical discipline., • Support proposal development and client engagement efforts., • Drive quality assurance through document reviews and technical verification.Qualifications Minimum Qualifications • Bachelor’s degree in Electrical Engineering, Architectural Engineering, or Engineering Technology (ABET-accredited)., • 10+ years of experience in electrical engineering within the AEC industry., • Experience in GMP manufacturing environments., • Proficiency in Revit, AutoCAD, and Microsoft Office Suite., • Advanced knowledge of electrical codes and standards (NFPA, IESNA, UL, OSHA, IEEE)., • Expertise in electrical system design, calculations, and troubleshooting., • Strong coordination skills across disciplines and with construction partners., • Ability to travel for client meetings, project execution, and training. #LI-HYBRID #LI-JV1 Additional Information All your information will be kept confidential according to EEO guidelines. CRB is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. Employment is contingent on background screening. CRB does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of CRB without a prior written search agreement will be considered unsolicited and the property of CRB. Please, no phone calls or emails. CRB offers a complete and competitive benefit package designed to meet individual and family needs. If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Job Description Who We Are: At Formic, we're on a mission to revolutionize American manufacturing and create more abundance in the world. We believe in continuing the American legacy of innovation by making automation accessible to all manufacturers and increasing their factory productivity by 10x. Built upon deep expertise in robotics and manufacturing, our unique full service automation solutions combine the best automation technology, software, and analysis tools for manufacturers with best in class uptime, support, and maintenance services. We are creating a new era of supercharged efficiency and competitiveness for US manufacturers.As the world faces growing pressure from tariffs, rising costs, and labor shortages, Formic is uniquely positioned as the industry leading solution to overcome these challenges. Fueled by our vision for a re-industrialized domestic supply chain, everything we do is aimed at growing "Made in America" products. And we're growing fast - achieving 7x growth in production hours YoY. Supporting us in our mission, with investments thus far totaling over $60 million, are backers including Lux Capital, Initialized Capital, Blackhorn Ventures, Mitsubishi HC Capital NA, and CEOs and founders of multiple Fortune 50 companies. About the Production Optimization Team: The Production Optimization team is responsible for delivering uptime, performance, and insight across Formic's nationwide fleet of robotic systems. This team is deeply technical and customer-facing—at the intersection of automation engineering, field service, and business impact. The Robotics Field Service Engineer (FSE) plays a critical role in this mission. You will diagnose issues, perform maintenance, monitor systems, and interact with customers to ensure optimal performance. You'll work hands-on with equipment from OEMs like Fanuc, Yaskawa, ABB, Universal Robots, and others across food, packaging, CPG, and logistics environments. What You'll Do: Field Service and Support • Perform preventative, corrective, and predictive maintenance for robotic manufacturing cells, • Respond to alarms or escalations (remote or on-site), diagnosing and resolving issues in accordance with customer ASA (agreed service agreements), • Provide on-site production support and informal training to operators and technicians, • Use CMMS tools (e.g. MaintainX) to log and track all field activity, asset status, and spare parts needs, • Coordinate self, vendors, and partners for in-field support—including scheduling and customer alignment, • Monitor system performance remotely via Formic dashboards (e.g., Grafana), • Generate detailed service reports including issue, RCA (root cause analysis), resolution, and follow-ups, • Feed real-world system and customer insights back into Continuous Improvement and Customer Success teams, • Build trusted, professional relationships with plant managers, operators, and technicians, • Document and escalate feedback from the field to internal stakeholders for commercial or product consideration, • Support site onboarding by identifying key champions and mapping decision-makers, • Collaborate in RCA sessions, site audits, and Continuous Improvement initiatives, • Train and mentor junior field technicians as needed, • Continuously improve technical knowledge (robotics, controls, networking, pneumatics, packaging equipment), • Maintain required safety, Lockout / Tagout (LOTO), and forklift certifications Required: • 3+ years of hands-on field service experience working on robotic or automation equipment, • Practical troubleshooting skills across electrical, mechanical, and PLC/robotic control systems, • Experience reading electrical schematics, wiring diagrams, and pneumatic drawings, • Strong familiarity with safety protocols, especially LOTO, and adherence to GMP or industrial SOPs, • Experience using CMMS tools (MaintainX, UpKeep, FIIX, etc.) to track, schedule, and report maintenance, • Comfortable with local area travel up to 80%, (Formic will provide mileage reimbursement for travel in your personal vehicle), • Overnight travel up to 50% (travel and meal expenses covered by Formic), • Experience with some 6-axis robot brands (e.g. Fanuc, Kuka, Yaskawa, ABB, Universal Robots), • Familiarity with robot palletizing, case packing, pick-and-place, and conveyor systems, • Background in high-speed manufacturing (food, beverage, packaging, CPG), • Comfort operating in customer-facing or account-support roles, • High autonomy and ability to resolve issues without extensive supervision, • Clean and timely documentation of all service work, • Frequent collaboration with Customer Success, Continuous Improvement, and Engineering teams, • Contribution to reducing overall fleet downtime and improving system uptime and customer satisfaction metrics Equity in Formic: Own a meaningful stake in a fast-growing Series A startup, backed by leading global investors * Comprehensive Healthcare Coverage: 99% covered Medical, Dental, and Vision insurance plans, with 75% coverage for dependents, provided by Blue Cross Blue Shield and Guardian * Additional Fully Covered Insurance Benefits: FSA & DCFSA, Life Insurance, Short-Term Disability, and Long-Term Disability through Guardian, all 100% employer-paid * Employee Assistance Program (EAP): Fully funded by Formic and provided via Guardian, offering support when you need it most * Paid Parental Leave: Generous parental leave to support our employees and their growing families * Company-sponsored 401(k): Invest in your future with our company-backed retirement savings plan * Home Office Stipend: A one-time allowance for fully remote employees to set up your ideal at-home or on the road work environment * Monthly Cell-Phone Reimbursement: Monthly stipend toward phone and internet expenses * Flexible Time-Off: Take the time you need, when you need it, supported by our flexible PTO policy * Paid Company Holidays: Celebrate important dates with paid time off Compensation Philosophy Formic's compensation packages - including salaries and equity - are thoughtfully benchmarked against peer companies at a similar growth stage. Equity represents a critical part of our mutual investment: when Formic succeeds, so do you. Final compensation packages are carefully customized based on candidate preference for cash and equity balance, experience, geographic location, and market considerations. Our goal is to attract and reward top talent who will significantly impact our organization. We're open to meaningful discussions about compensation structure to secure exceptional team members. The anticipated base pay range for this position is detailed below. Base Salary Range:$70,000—$120,000 USD What we look for: We're building a company from the ground up, so every single person we hire has a massive impact on our team, culture, and ability to accomplish our mission. While each individual brings their own unique skills and perspectives to Formic, we look for people who share our vision and act in alignment with our Operating Principles. If this sounds like you, Formic could be the place for you! • Fearless Optimism: You share our ambitious vision of what we can accomplish. You're aware of the challenges we will face as a startup doing new things in an old space, but you're energized by the incredible opportunity we have to drive change for our customers, and for the manufacturing industry at large., • Factories First: You have a strong customer focus, no matter who your customer is. You seek to make things easier and better for our customers, even if it makes your job a little harder., • Today, Not Tomorrow: There are always plenty of projects to tackle in a startup, but you prioritize, take accountability for work, and have a bias toward action., • Be Right Often: You don't do things just because that's how they've always been done. You keep looking for ways to improve, seek out feedback along the way, and back your decisions up with data., • Made of Rubber: Just like rubber, when you fall you bounce back up. You know there's going to be a lot of challenge and change in our work ahead but you are adaptable, resilient, and ready to thrive through it all.

Job Description Whether you're a recent grad or a seasoned professional, you can experience meaningful career growth at Rosendin. Enjoy a true sense of ownership as you work with a proven industry leader on some of the most exciting and high-profile projects in the nation. We offer a wide range of job opportunities, competitive compensation, full benefits, an Employee Stock Ownership Plan and more. Why Rosendin?Committed. Innovative. Engaged. If you're looking to take your career to the next level and work with some of the best and brightest in the industry, we want to hear from you. Since our founding over 100+ years ago, Rosendin has been driven to positively impact the communities where we live and work. We are an organization built on integrity and we have a culture that empowers people, embraces diversity, and inspires everyone to do their best. As one of the largest EMPLOYEE-OWNED electrical contractors in the United States, you will have the unique benefit of being a shareholder at a company that is experiencing tremendous growth and success. When our people succeed and fuel our success, we reward them. We'd love to have you as a shareholder! YOUR NEXT OPPORTUNITY: The Senior Engineering Team Lead is an advanced-level engineering management position responsible for overseeing larger or more complex project work and may oversee several Engineering Team Leads on an ongoing basis. The Engineering Senior Team Lead will possess engineering management skills for resource allocation, work flow, work planning, fee estimating and independent QA/QC of Design team work in addition to advanced technical competence. You'll lead, consult and be customer facing. You'll bring your deep knowledge and expertise of Data Center, AI and Mission Critical work and manage a large scope of project work. WHAT YOU'LL DO: * Possess the ability to understand project requirements and develop a design fee for the work requested. * Prepare and oversee work plans for engineering and production resources. * Oversee and evaluate current team and project resource allocation as well as fee disposition * You'll build and train your own staff throughout the region of responsibility. * Oversee Engineering Team Leads, Engineers, Designers and Modeling staff assigned to team or project work. * Communicate with Project Executive (PX) or Division Manager (DM) regarding effort required to accomplish and expected deliverable along with project support.In some cases, this may include developing or overseeing requests for additional services for submittal to the PM team or Owner. * Oversee the Engineering CAC effort in support of the projects assigned to Engineering Team Leads under their supervision. * QAQC of project designs developed Engineering Teams under their supervision. * Technical problem resolution. * Supervise the coordination of the project with city, state, and county officials, and other regulatory agencies. * Perform Value Engineering studies. * The duties and responsibilities are intended to describe the general nature and scope of work being performed by this position. This is not a complete listing and other duties will be assigned based on the position's role within the business unit. COMPETENCIES: * Leadership - Ability to lead technically complex efforts and multiple diverse teams. * Communication - Fluency of communication in oral and written formats with the ability to lead presentations to executive management and customers. * Teamwork - Ability to work collaboratively with a diverse leadership group. WHAT YOU'LL NEED TO BE SUCCESSFUL: * Advanced knowledge of engineering processes and calculations including load calculations, equipment layout, normal and emergency standby distribution, HV/MV distribution, lighting layout, lighting calculations, power and lighting controls, utility coordination, grounding, value engineering, applicable codes, and standards, is required. * Advanced management skills are required, including work planning, resource management, fee development, staff oversight, staff development and advancement planning. * Advanced knowledge of equipment and system testing and commissioning. * The ability to analyze and resolve technically complex engineering problems. * The ability to oversee and review Electrical System Studies such as: Short Circuit, Overcurrent Protection, Arc Flash, Voltage Drop/Droop, and Underground Thermal Calculations. * The ability to develop a complete and accurate sequence of operations for automated systems. * Knowledge of electrical construction techniques and workflow sufficient to understand how design packages will be built. * Proficient in using a computer and Microsoft Office (Outlook, Word, Excel, etc.); Oracle preferred * Ability to prioritize and manage multiple tasks, changing priorities as necessary * Ability to work under time pressure and adapt to changing requirements with a positive attitude * Effective oral and written communication skills as required for the position * Ability to be self-motivated, proactive and an effective team player * Ability to interact effectively and professionally with all levels of employees, both executive management and staff alike, vendors, clients, Trade Partners, and others WHAT YOU BRING TO US: * Bachelor's Degree from an accredited university or college in engineering, architectural engineering, or construction sciences. * Typically requires 10 years of Engineering Experience * Registration as a licensed US-based Professional Engineer (P.E.) is required for this position. * Field experience is strongly recommended. * Education and experience can be a combination of education, training, and relevant experience. TRAVEL: * Up to 25% (Does not include local site visits) WORKING CONDITIONS: * General work environment - sitting for long periods, standing, walking, typing, carrying, pushing, bending. Work is conducted primarily indoors with varying environmental conditions such as fluorescent lighting and air conditioning * Noise level is usually low to medium; it can be loud on the jobsite. * We fully comply with the ADA and applicable state law, including considering reasonable accommodation measures that may enable qualified disabled applicants and employees to perform essential functions. * Occasional lifting of up to 30 lbs. Rosendin is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, pregnancy, age (over 40), or any other categories protected by applicable federal, state, or local law. YOU Matter - Our Benefits * ESOP - Employee Stock Ownership * 401K * Annual bonus program based upon performance, profitability, and achievement * 17 PTO days per year plus 10 paid holidays * Medical, Dental, Vision Insurance * Term Life, AD&D Insurance, and Voluntary Life Insurance * Disability Income Protection Insurance * Pre-tax Flexible Spending Plans (Health and Dependent Care) * Charitable Giving Match with our Rosendin Foundation Our success is rooted in our people. We all come together around long-term vision and a sense of shared ownership. As a group, we do whatever it takes to ensure the success of our business and your career. Rosendin Electric is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Job Description OEI (O'BRIEN Engineering & Architecture) is looking for an Electrical Design Engineer to join our team in design of OEI, a full-service Architecture and Engineering design firm, was founded 38 years ago in Dallas, TX, and serves customers nationwide. We have a robust backlog of vertical and horizontal project types and, across our teams, we serve Federal, Healthcare, Military, and Institutional clients. OEI is honored to be awarded the National Society of American Military Engineers' Robert Flowers Small Business of 2020. A Service-Disabled Veteran Owned Small Business, OEI has a deep backlog of contracting capacity extending well into 2035. So, are you ready to work in a dynamic, challenging, rewarding environment? We invite you to send us your information and let’s visit about how we can team in a way that our best efforts will help build your career, and your best efforts will strengthen OEI and add value to our clients in ways that are measurable, recognized, and appreciated. Key Responsibilities, Requirements, and Misc Of Note: • Building system concepts and documentation process from schematics through construction administration phases., • Experience with central plants, hydronic, steam/ VRF and energy recovery systems., • Working knowledge of building and building system codes (IBC, IECC, IMC, ASHRAE standards and NFPA standards)., • Proficient in Revit and building load and energy modeling software including SKM, Bluebeam, AutoCAD, • Design support of electrical systems and related controls., • Possess general working knowledge of different electrical systems; stay up to date on industry advancements including best-practices for applicability., • Supervise the installation of the designed systems and equipment., • Prepare cost estimates, specifications, and design analyses., • Bachelor's degree in Mechanical Engineering from an accredited college or university., • 4-8+ years of experience designing mechanical HVAC systems for commercial buildings, health care and federal projects., • PE License preferrable (or ability to obtain within six months), LEED accreditation a plus. What makes us unique? • We offer high expertise in a small package, • We are structured to hear, understand, and solve customer problems Benefits: • 401(k) matching, • Dental insurance, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Parental leave, • Professional development assistance, • Referral program, • Retirement plan, • Tuition reimbursement Are you ready to work in a dynamic, challenging, rewarding environment? Let's talk. See how we can partner together in a way that our best efforts will help build your career and your best efforts will strengthen our company in a way that is measurable, recognized, and appreciated. OEI is a Service-Disabled Veteran Owned Small Business (SDVOSB), Texas HUB, and SBE firm. OEI's foundations: teamwork, entrepreneurial mindset (taking ownership of the problem and the solution), continuous improvement, competence, ethical behavior What makes us unique? We offer high expertise in a small package We are structured to hear, understand, and solve customer problems We have a culture of training and employee developmentPrimarily located in North Texas, OEI is a full design services firm with a big company future, and, we are looking for motivated and qualified team players to join us on the journey. We were founded 38 years ago in 1987; today, we serve clients throughout the US and its territories serving on federal, healthcare, military, and institutional projects. We’ve had significant success in winning many large federal contracts, providing a work pipeline that extends well into 2035. We also have a well-established, growing municipal, land development and private practice. OEI is honored as the recipient of the national Society of American Military Engineers' Robert Flowers Small Business of the 2020.\r\n\r\nAre you ready to work in a dynamic, challenging, rewarding environment? Let's talk. See how we can partner together in a way that our best efforts will help build your career and your best efforts will strengthen our company in a way that is measurable, recognized, and appreciated.\r\n\r\nOEI is a Service-Disabled Veteran Owned Small Business (SDVOSB), Texas HUB, and SBE firm.\r\n\r\nOEI's foundations: teamwork, entrepreneurial mindset (taking ownership of the problem and the solution), continuous improvement, competence, ethical behavior\r\n\r\nWhat makes us unique?\r\nWe offer high expertise in a small package\r\nWe are structured to hear, understand, and solve customer problems\r\nWe have a culture of training and employee development

Job Description Job Title: SCADA and Controls Engineer Job Type: Full-Time Job Location: Dallas, TX (Remote) Schedule: The SCADA and Controls Engineer is responsible for supporting reliable and compliant operations by maintaining SCADA and Power Plant Controllers for solar power plants. This includes troubleshooting of any SCADA or Power Plant Controller issues, coordinating with SCADA integrators to implement configuration changes or SCADA upgrades, providing commissioning oversight for new SCADA systems, and working with the OT and Compliance teams to ensure that SCADA systems meet networking cyber security and compliance requirements. Duties/Responsibilities: • Troubleshoot issues with SCADA and Power Plant Controllers., • Coordinate with SCADA integrators to implement changes or SCADA upgrades., • Perform validation and quality control checks for new and existing SCADA systems., • SCADA design and implementation. Experience specifically with Ignition! or GE Cimplicity preferred., • Understanding and familiarity with solar and battery system logic for Power Plant Controller (PCC) functionality including Automatic Voltage Regulation and Frequency Response., • Understanding and familiarity with solar Power Plant Controller functionality including Automatic Voltage Regulation and Frequency Response., • Understanding of power plant operations and situational awareness needs for system operators., • Proficiency with SEL RTAC configuration., • Bachelor's degree in a technical field., • Prolonged periods sitting at a desk and working on a computer., • 401(k) with employer match, • Health Insurance, • Dental Insurance, • Vision Insurance, • Flexible Spending Account, • Health Savings Account, • Short-term and Long-term disability, • Critical illness, • Paid Time Off, • Parental Leave, • Paid Holidays, • Employee assistance program, • Life insurance, • Opportunities for advancement, • Training and Development, • Legal and Identity Theft

Job Description Controls Field Service Technician - Dallas, TX Our client is a Engineering Design and Commissioning Company that has a national footprint and specializes in MEP / Controls and Critical Facilities Design. They provide design, commissioning, consulting and management expertise in the Critical Facilities Space. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. A fully competent Controls Field Technician - Applies an intensive and diversified knowledge of complete Controls and Building automation systems platforms such as EPMS (Electrical and Power Monitoring Systems), BAS Systems (Building Automation Systems), or BMS System (Building Monitor Systems) in a data center or industrial environment - testing and operations. Responsible for programming, integration, implementation commissioning, maintaining and providing emergency support on critical controls systems at customers' sites within their respective regional area. They will troubleshoot, install, and make upgrades to existing automation systems for power and cooling systems in a live, mission-critical environment. They will assist in complete startup, commissioning, and validation procedures of these systems. They will collaborate with the Electrical and Mechanical Engineering / Design teams, Software Development teams, Project Managers, Construction Contractors, Equipment Vendors, Field Techs and Site Operations teams to ensure the reliability, proper operations, acceptance of new and modified installations, automations and software solutions. Applies an intensive and diversified knowledge of complete BMS, BAS, EPMS - coding, testing and operations. Responsibilities: • Direct and monitor subcontractors (onsite and offsite) including scheduling, resource management and coordination of construction and start-up services as needed. Construction trades generally include various electrical, mechanical and equipment suppliers., • Install and wire BAS controllers and field devices including low voltage cable terminations, • Installation Coordination of BAS / HVAC Controls Systems, • Plan site activities for your team including organize job site materials, logistics, inventory, tools storage and security / access, • Lead installation teams on daily and weekly meetings, • Support the development and execution of additional services through change orders, • Cutover panels and systems in retrofit projects, • Develop and Implement Methods of Procedure (MOPs) for site activities, • Provide input to project team on developing RFIs, estimating and takeoffs for proposals, • Performs commissioning focused design reviews, prepares commissioning test procedures and reports, coordinates and oversees on-site testing, Startup, Commissioning and Closeout of BAS / HVAC Controls Systems, • Assist software lead with pre-functional and functional testing, • Execute troubleshooting of BAS systems including corrective actions, • Participate in commissioning efforts with external stakeholders, • Analyze system operation, work with project team to demonstrate system operation and verify consistency with the contracted scope of work, • Perform QA / QC of BAS and integrated systems using BAS software tools, • Provide installation inspections and other closeout duties to ensure customer acceptance, • Provide markups for shop drawings to document as-built conditions, • Communicate regularly with subcontractors, project managers, clients and commissioning agents on project progress, • Document and track issues and out of scope efforts, • Autonomous in day-to-day work with being given high level instruction on projects or assignments, • Discuss with technical support problems related to maintenance or operation of equipment, • Attend project bid walks, engineering surveys, BAS audits, etc, • QA/QC peer reviews for projects which candidate is not the engineer, • Optimize workflow and deliverables by developing templates, standards, automations, etc., • Communicate regularly with internal and external stakeholders, subcontractors, project managers, AEs and commissioning agents on project progress, • Needs to be located in Pacific Northwest, • Open to traveling to job sites in the region - 75% of the time, • Critical Facilities / Data Center experience a must, • Experience with Distech Controls and Tridium Niagara BAS Platforms highly preferred, • Preferably 3-8+ years experience with BMS /BAS Controls, • Experience with any of the following systems (JCI, Metasys, Siemens, Honeywell, Automated Logic) a plus, • PLC / ALC Experience, • Experience with critical HVAC equipment (Chillers, Air Handlers, CRAC / CRAH units, Boilers, etc.), • Requires knowledge of equipment manufacturer's specifications, • Ability to interpret AE construction drawings, BAS shop drawings, manufacturers wiring diagrams, standards documentation, submittals and product data sheets, • Ability to follow company and site safety requirements, • Must be able to complete Field Service Reports and Assignments accurately and within a timely manner, • Analyze and prepare documents, reports and correspondence, • Candidate must be willing to work nights & weekends when necessary, • MS Office Suite (Excel, Word, Outlook, PowerPoint, Teams), • Previous experience in the Military / Military veterans in all branches that have experience with Electrical / Mechanical is a huge plus (Navy nukes- EMN, ETN, MMNs, Seabees, Army - Power Generation, Air Force – Power Production, Generator Techs, Maritime, Coast Guard, etc.), • Requires excellent verbal, written communication skills & customer relation skills, • Ability to work independently and resourceful with good initiatives, • Client facing experience and at times serve as primary point of client contact on various projects, • Ability to successfully work independently; Self Starter and should prioritize well, • Proactive, resourceful, delegator and a multitasker After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description Sr. Director, Information SecurityAspira | IT OperationsAbout Aspira For more than 40 years, Aspira has been the market-leading provider of software and services that help public agencies protect natural and cultural resources while making them accessible for all. Our platform supports everything from campground reservations to hunting licenses, helping millions of people discover, enjoy, and care for the outdoors. We share our client partners’ mission: to steward resources for future generations, create opportunities for genuine enjoyment of the outdoors today, and expand access so more people can experience its benefits. Aspira is transforming its technology and service model to give agencies more capacity and insight—streamlined tools, smarter automation, and better connections with their communities. Our goal is simple: make it easier for our clients to conserve what matters most and for their customers to enjoy it to the fullest. The Ideal Candidate The Director of Information Security is responsible for building and leading Aspira’s global information security program across cloud, on-premises, and hybrid environments. Reporting to the VP of Technology Operations, this leader will manage the Security Analyst, Senior Security Cloud Network Engineer, and Senior Security System & Network Engineer roles. This role offers significant influence in shaping Aspira’s security strategy and close partnership with the VP of Technology Operations and executive team. It requires a hands-on executive technical leader who can both set strategic direction and dive deep into incident response, cloud security, and network defense. The Director will mature Aspira’s monitoring, threat response, and compliance posture while partnering closely with Technology, Product, and Engineering teams. Key Responsibilities Security Strategy & Leadership • Develop and execute Aspira’s enterprise information security strategy, aligned with business goals and regulatory requirements., • Develop and execute Aspira’s information security roadmap, aligned with Tech Ops goals and enterprise strategy., • Lead the design and enforcement of security standards across AWS, Azure integrations, and on-premises systems within the US and abroad, • Provide security risk reporting and metrics to VP Tech Ops and executive leadership, • Manage and mentor the security team (Analyst, Sr. Cloud Security Engineer, Sr. Network Security Engineer)., • Represent security within Aspira’s Technology Operations leadership team., • Oversee cloud security architecture for AWS-native services (VPCs, Transit Gateway, Direct Connect, GuardDuty, WAF, Network Firewall)., • Direct firewall and VPN management across Palo Alto (Panorama), Cisco Meraki, and hybrid environments., • Ensure secure hybrid connectivity across AWS, Azure, and global office sites., • Lead the monitoring and incident response program, integrating AWS CloudWatch, CloudTrail, Security Hub with Rapid7, LogRhythm, and log monitoring pipelines., • Define incident response playbooks and coordinate Tier 2/3 escalations., • Oversee forensic investigations, root cause analysis, and lessons learned after security events., • Ensure compliance with NIST, PCI DSS, CIS Benchmarks, SOC2, and insurer-driven security baselines (e.g., MFA enforcement)., • Drive risk assessments, security audits, and penetration testing., • Own responses to customer/vendor security reviews, insurer security questionnaires, and regulatory audits., • Maintain documentation for policies, controls, and audit reporting., • Lead automation of security operations using Terraform, Ansible, and CloudFormation., • Implement CI/CD security integrations to support DevSecOps practices., • Track KPIs for detection coverage, incident response times, and vulnerability remediation., • Partner with DevOps and engineering to embed DevSecOps practices in the software lifecycle., • Optimize SIEM and log ingestion pipelines to achieve full visibility across servers, endpoints, and laptops.Qualifications, • 8+ years in IT and security, including senior leadership in cloud and network security., • Proven expertise in AWS security services, SIEM platforms (Rapid7/LogRhythm), Palo Alto/Meraki firewalls, and hybrid connectivity., • Proven experience securing AWS-first environments (VPCs, Security Hub, GuardDuty, WAF, Network Firewall) and hybrid global networks., • Strong background in incident response, log analysis, and forensic investigation., • Deep understanding of security frameworks and compliance standards (NIST, PCI DSS, SOC2, CIS)., • Hands-on automation/scripting experience with Terraform, Ansible, Python, or PowerShell., • Certifications are strongly preferred: CISSP, CISM, AWS Security Specialty, PCNSE, CCNP Security.

Job Description DevOps Engineer PURPOSE The Development Operations Engineer will work collaboratively with the Systems Operations team, Applications Development team and Rackspace team, to deploy and operate the systems at Worldwide Express. This position will help automate and streamline the operations and processes and build and maintain tools for deployment, monitoring and operations. ESSENTIAL DUTIES, RESPONSIBILITIES & OUTCOMES: • Build process, procedures, and controls for applications development team around source control., • Partner with project manager and application developers for successful release management., • Support and maintain Jira, Jenkins, Bitbucket and other related software products to assist in source control, migration, and change management., • Perform system administration tasks in Linux and Windows Servers, including maintenance, troubleshooting, configuration, software installation, upgrades, and backup/recovery., • Upgrade systems and processes as required for enhanced functionality and security issue resolution., • Automating operational processes using scripting languages such as Shell/Ruby/Python/Ansible/Puppet/Chef tools., • Develop, implement, and continually improve system and network monitoring and alerting capabilities and procedures., • Manage relations with different teams and at various locations., • Create and maintain technical documentation for CMS, ITSM, Change control, and other system operation process’s. WHAT WE EXPECT FROM YOU: • 3+ years of related experience., • 5+ RHEL systems administration, • Strong experience with DevOps technologies including Source Code Control, Build/Deployment Management, Continuous Integration, and Continuous Delivery., • Experience with developing branching Strategy for GIT and Bitbucket Source Control Management tools., • Strong scripting skills to automate infrastructure monitoring and the deployment of software releases to development, UAT, and production environments. KNOWLEDGE OF • Excellent knowledge of the operating system(s) and automation tools., • Excellent knowledge of source control and migration software., • Knowledge of migrating code, database changes, through the various stages of the development life cycle., • Knowledge of how IT operations are managed., • Knowledge of Cloud technology’s, AWS, AZURE…., and the services they provide. SKILLS AND ABILITIES IN • Ability to handle projects for integration of Bitbucket and Jenkins, specifically in Agile development environment, working closely with various Applications Development teams., • Analytical thinking skills., • Problem solving., • Technical Expertise., • Communication/Collaboration with all levels., • Data management. (tk9nah)

Job Description Summary Our client is a leading and established IT Solutions Firm in the Arlington, TX area that is seeking a professional Senior Systems Engineer to join their team. This position will consult, design, and implement IT advanced solutions. This position will also troubleshoot complex problems and mentor junior team members while being on a specific track towards CIO level consultancy. As an IT organization, they work on the latest technology from the top IT solution manufacturers and bring those technologies to solve their clients’ challenges and help them find strategic direction. If you are seeking to advance your career in a big way, then this just might be the opportunity that you've been seeking. This is truly a unique role for the right person. If you have strong engineering experience and desire to train under the direct mentorship of a CIO and guided interaction with an experienced CEO, this is a great opportunity. Learn more about ROI, risk management, and strategic planning. Stay ahead of the technology curve and keep your skills relevant while sharpening your business acumen. Duties & Responsibilities • Project Management, • System Design, • Working with technology vendors, • Consulting and deployment of server and network solutions., • Client Strategical Plan Development, • Advanced diagnostic and remediation of server and network solutions., • Write clear and concise documentation and instructions., • Ability to manage and prioritize multiple tasks in fast paced environment., • Participate in on-call rotation., • Extensive knowledge of Active Directory and Windows Server Technologies (Windows Server, Exchange, RDS, SQL, IIS …), • Experience with cloud technologies (Azure, O365, AWS, Google, G-Suite …), • Experience with diagnostic, repair and installation of server and network systems., • In-depth working knowledge of virtualization including VMWare, Nutanix, SANS and clustering., • In-depth knowledge of networking technologies including TCP/IP, VLANS, routing, switches, firewalls, DNS, VPN, and VoIP. (Cisco, Fortinet, Sonicwall), • Working knowledge of security policies and NIST controls., • Mastery and certified in one or more of the following:, • Microsoft Servers, Fortinet, Cisco, VMWare, Nutanix, Windows Server, Storage Networking, • Education: Bachelor’s degree required, • Experience: 5+ Years systems design, administration, installation, and troubleshooting, • Preferred Certifications:, • MCSA Server or MCSE, • Cisco, • Fortinet, • VMWare, • Nutanix

Job Description Job Title: Automation Controls Engineer Location Mesquite, TX (Onsite – 5 days/week) Job Type: Full-Time | Direct Hire Salary: $115,000–$140,000/year Benefits: medical, dental, vision insurance Job Description: We’re working with one of the top global manufacturers in their industry to find an experienced Automation Controls Engineer. This role plays a key part in supporting and improving manufacturing automation processes — we’re looking for someone with hands-on experience in a manufacturing or industrial environment. You’ll join a team of 8 engineers, working directly on automation processes within a high-tech manufacturing facility. Your expertise in automated guided vehicles (AGVs), PLCs, and robotics will be critical in maintaining and evolving the plant’s automation systems. Requirements: • 8+ years of experience in controls engineering, automation, or related field, • Strong background with PLC programming and troubleshooting, • Experience with automated guided vehicles (AGVs), • Familiarity with robotic systems in a manufacturing environment, • Previous experience supporting highly automated production lines, • Strong troubleshooting and systems integration skills Addison Group is an Equal Opportunity Employer. Addison Group provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state and local laws. Addison Group complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities. Reasonable accommodation is available for qualified individuals with disabilities, upon request. IND 005-009

Job Description About the job Building Automation Alerton Programmer Located in Dallas, Texas, we are seeking a Building Automation Controls Engineer skilled in designing, programming, and optimizing Alerton building management systems. This position involves creating and implementing network architecture, submittal preparation, programming, troubleshooting, and integrating third-party controllers to expand existing BAS installations. You will support technicians, develop system logic, and ensure efficient and reliable system operations. The role demands a comprehensive understanding of HVAC and mechanical systems, with an emphasis on renovation projects and maintaining distributed control systems for robust functionality. Responsibilities: • Design Alerton BAS systems, including network architecture and submittal preparation., • Develop and write programming for Alerton systems, with a focus on Central Plant applications., • Integrate third-party BACnet-compatible equipment controllers., • Create graphics design and implement as needed., • Provide remote troubleshooting and support to field technicians., • Utilize tools such as AutoCAD, Revit, Visio, and Microsoft Suite for engineering design and documentation., • Work on renovation projects, with some involvement in new construction as needed., • Ensure system designs prioritize distributed control logic within local controllers., • 3-5 years of specific Alerton BAS experience (additional experience welcomed)., • Proficiency in Alerton system programming and design., • Familiarity with AutoCAD, Revit, Visio, and Microsoft Suite tools., • Strong understanding of mechanical systems and HVAC equipment operations., • Experience with various HVAC systems, including:, • Built-up AC units with DX or chilled water cooling, • VAV AHUs, multi-zone AHUs, hydronic systems, and specialty systems, • Terminal unit systems (2-pipe, 4-pipe, VAV boxes, fan coil units, etc.), • Project experience in building types such as K-12, universities, municipal buildings, hospitals, industrial plants, and military bases., • Experience with renovation projects over new construction., • A detailed understanding of HVAC mechanical systems and control logic., • Familiarity with a variety of building types and operational systems., • Strong troubleshooting and technical support skills., • Salary Range: $90,000 - $120,000 annually, based on experience and position level., • Health Coverage: Comprehensive medical, dental, and vision insurance plans., • Retirement Savings: 401(k) plan with company match, helping you secure your financial future., • Life and Disability Insurance: Life insurance and long-term disability coverage to protect you and your family., • Flexible Spending Accounts: Options for healthcare and dependent care, maximizing your tax savings., • Paid Time Off: Generous vacation, sick leave, and holiday schedules to ensure work-life balance., • Employee Assistance Program: Access to resources and support for personal and professional life challenges. Joining our team means being part of a dynamic and forward-thinking company dedicated to innovation in the field of advanced building technology. Our work environment is one where talented industry professionals can thrive and continue to develop their skills through engaging and innovative projects. With our headquarters in Phoenix, Arizona, and additional offices across California, Texas, Nevada, New Jersey, and New York, we provide a diverse and inclusive workplace that values each employee's contributions. We're not just about work; we're about building a community. Our competitive wages, comprehensive benefits package, and commitment to employee well-being reflect our dedication to ensuring our team not only succeeds professionally but is also supported personally. Whether you're looking to advance your career, collaborate on industry-changing projects, or find a stable environment that values your contributions, we offer the perfect platform to connect, grow, and lead. Join us to make a tangible impact in the world of building automation and control systems. Company DescriptionPrime Partners specializes in providing skilled labor on demand as we take pride in finding the best talent for our partnering companies based on specific hiring needs and requirements.Prime Partners specializes in providing skilled labor on demand as we take pride in finding the best talent for our partnering companies based on specific hiring needs and requirements.