Ear jobs in Deer Park, New YorkCreate job alerts

Job Description Position Summary: Blends raw material in a batch process, maintaining an orderly and clean facility in compliance with state and federal regulations and completing all paperwork associated with these tasks. Position Scope: • Daily production volume is based on the product scheduled, which is determined by inventory volume and product demand. Position Responsibility: • Retrieves the raw material batch, which has been reserved from storage room., • Following the batch record the Blender will process the raw material based on the step by step batch instructions. The raw material will be handled differently based on the batch record, e.g. screened, Fitz Mill, etc. Puts raw material into the blender, which is timed based on the batch instructions. Runs blenders depending upon the batch size, e.g., 3cu, 10cu, 30cu, 50cu or 75 cu. After the blending is complete, they discharge blend into totes or clean drum., • Weighs whole totes or drum and puts weight on the paperwork., • Quality will verify the weight., • Move totes or drum into the storage area by using a hand jack, electric jack or forklift., • Must properly care for and maintain equipment during use and storage of the equipment, • The operator performs lock out / tag out procedures., • Physical Lifting required in the form of plastic and metal drums, totes, equipment, etc. Ladder climbing and forklift operation to retrieve stock. The lifting can be between 25-30Kg and/or roll drums weighting 80 kilos which occurs 25% of the day., • Must wear Personal Protective Equipment – a respirator, ear plugs, hair net, beard cover and uniform., • Overtime may be required based on production volumes, • Cross training will be conducted as time permits to increase knowledge of other production positions., • Satisfactory completion of appropriate corporate training as related to the position and/or department., • Assures compliance by following Food and Drug Administration's Good Manufacturing Practices as well as other regulatory standards as required by the department., • Contributes to overall achievement by accomplishing related tasks and demonstrating characteristics that exemplify team building and support., • The above is not intended to be an all-inclusive list of responsibilities. Other activities may be assigned as required by management. QUALIFICATIONS Experience and Skills: • Prior knowledge in a manufacturing environment with the ability to read a batch record and cGMP experience., • Ability to understand basic metrics system., • Ability to stay focused on extreme detail., • Highly motivated individual., • Must be able to lift bags up to 30 Kilos and roll drum up to 80 kilos – 25% of the day. Education and Certifications: • High School Diploma or Equivalent, preferred

NOTE: This position must be performed in Washington, DC so relocation to Washington, DC will be required. Recruitment Incentive: Applicants may be eligible for a $75,000 recruitment incentive in accordance with regulatory requirements. Click apply to view full details and eligibility of this recruitment incentive. At their core, those who join the Secret Service are courageous, intelligent, strong and determined. A diverse team capable of balancing our investigative mission and fulfilling our protective legacy. Proven to be worthy of trust and confidence. Be tomorrow's Secret Service. Duties During the course of their careers, Secret Service Police carry out assignments in protection. Duties include: • Providing protection for The White House Complex, The Vice President's Residence, The Main Treasury Building and Annex, and foreign diplomatic missions and embassies in the Washington, D.C. area., • Traveling in support of the Presidential, Vice Presidential, and foreign heads of state/government missions., • U.S. citizenship is required., • Possess a current valid U.S. driver's license., • Must be at least 21 years old at the time of application and under 40 at referral. Exceptions may apply for those with current or prior service in federal law enforcement positions covered by special retirement provisions. The Secret Service has determined that age is essential to the performance of this position., • Carry and use a firearm. Maintaining firearm proficiency is also mandatory., • Possess uncorrected visual acuity of no worse than 20/100 binocular. Possess corrected visual acuity of 20/20 or better in each eye., • Hearing loss, as measured by an audiometer, must not exceed 25 decibels (A.S.A. or equivalent I.S.O.) in either ear in the 500, 1000, and 2000 Hz ranges. Applicants must be able to hear the whispered voice at 15 feet with each ear without the use of a hearing aid., • Submit to a drug test prior to your appointment and random drug testing while you occupy the position., • Complete 12 weeks of intensive training at the Federal Law Enforcement Training Center (FLETC) in Glynco, GA or Artesia, NM and 17 weeks of specialized training at the James J. Rowley Training Center in Laurel, MD., • Certify that you have registered with the Selective Service System or are exempt from having to do so, if you are a male applicant born after December 31, 1959.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency ("RF") components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards ("PCB"s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at Summary: To perform assigned assembly operations using all applicable occupational skills, with an absolute minimum of supervision and with an extremely high degree of competence. Essential Duties & Responsibilities: \n • Performs complex and intricate wiring and assembly operations to production standards.\n, • Records, maintains and researches/retrieves data via paper or computer, as applicable.\n, • Moves assigned electro-mechanical hardware through production to its next corresponding operation when required.\n, • Works from complicated drawings, operation sheets, assembly procedures, material specifications and processes, sketches, verbal instructions, etc.\n, • Capable of conducting continuity checks.\n, • Capable of being certified for all assigned tasks within the scope of this job description and the applicable occupational skills.\n, • Satisfactorily demonstrates the ability to fulfill the required technical qualifications of the job by taking an applicable practical demonstration.\n, • Minimum of 1-4 years directly related experience, or IPC Certification\n, • High school diploma or equivalent\n, • Rarely lifting over 25 lbs. of weight\n #LI-MP1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered. Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $39,099 - $58,649 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency ("RF") components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards ("PCB"s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at Summary Provides basic engineering support to the production area to maintain optimum levels of productivity in terms of cycle times and quality. Assists in coordinating the introduction of new assembly processes on to the production floor by preparing operation sheets that describe specific production tasks. Assists design engineers throughout the design process from concept to prototype in order to ensure that maximum production efficiency. Essential Duties \n Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered. Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $68,004 - $113,340 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency ("RF") components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards ("PCB"s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at Summary: To perform assigned machining operations using all applicable occupational skills with an absolute minimum of supervision and with an extremely high degree of competence. Essential Duties & Responsibilities: \n • Performs complex and intricate machine and assembly operations to production standards.\n, • Produces simple sketches describing order of machining operations, when required.\n, • Sets up, programs and operates automatic, semi-automatic and manual machine equipment including milling, lathe, punch press, drill press, grinders, shears, saws and related equipment necessary for the maching and manufacture of chassis, racks, consoles, brackets, terminal boards, printed circuit boards, panels, welding, sheet metal, repair rework, etc.\n, • Records and maintains data, as required.\n, • Works from complicated drawings, operation sheets, assembly procedures, material specifications and processes, sketches, verbal instructions, etc.\n, • Knowledge of applicable Company and military specifications.\n, • Capable of being certified to Company standards.\n, • Works to extremely close tolerances with all types of machine tools.\n, • Thorough knowledge of required shop mathematics.\n, • Reads and interprets complex blueprints.\n, • Determines type of machines and required sequences of operations.\n, • Capable of drilling, pinning, riveting and assembly operations.\n, • Sets up and runs operations on all types of machines and equipment.\n, • Proficient in meeting all Company quality Standards required for job function.\n, • Complies with all Company Safety Regulations and maintains a clean, non-hazardous work environment.\n, • Capable of performing job tasks in accordance with all related Company Standard Operating Procedures (SOPs).\n, • Complies with all related Company policies and procedures.\n\n Skills: \n • Minimum of 6 years directly related experience\n, • Able to use a variety of precision measuring instruments\n, • Experience with sheet metal & aluminum repairs\n, • Welding experience helpful\n, • Experience with hand tools\n, • High School diploma or equivalent.\n\n #LI-KR1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered. Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $0 - $0 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency ("RF") components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards ("PCB"s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at Summary: The Buyer role prepares RFQs, negotiates quotes and purchases assigned items in a professional and competent manner. Essential Duties & Responsibilities: \n • Processes assigned requisitions by selection of suppliers, obtains and evaluates quotations, negotiates, develops source justifications, price justifications, initiates procurement action and makes commitments within delegated authority\n, • Prepares data for generation of the purchase order\n, • Develops new sources of supply and maintains source files\n, • Attends assigned meetings\n, • Expedites purchase orders if required\n, • Performs other duties as required\n\n Skills: \n • Bachelor's degree from a four-year college or university\n, • 3-5 years related experience and/or training; or equivalent combination of education and experience\n, • Knowledge of PC's and software, including Microsoft Excel, Word and Outlook\n, • Ability to interact with varying levels of management, subordinates, co-workers and customers as needed\n, • Experience working in an MRP environment\n, • Knowledge of Oracle a plus\n\n #LI-PG1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered. Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $67,265 - $112,109 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

Your initial post of duty will be determined at the time of the final job offer and will be based on the operational needs of the U.S. Secret Service. Recruitment Incentive: Applicants may be eligible for a $40,000 recruitment incentive in accordance with regulatory requirements. Click apply for complete details on the recruitment incentive details and eligibility. At their core, those who join the Secret Service are courageous, intelligent, strong and determined. A diverse team capable of balancing our investigative mission and fulfilling our protective legacy. Proven to be worthy of trust and confidence. Be tomorrow's Secret Service. During the course of their careers, special agents carry out assignments in both investigations and protection and may be assigned to multiple duty stations throughout the U.S. and abroad. Duties include: • Providing protection for various protectees., • Conducting criminal investigations pertaining to financial obligations of the United States. Requirements • U.S. citizenship is required, • Possess a current valid driver's license, • Carry and use a firearm. Maintaining firearm proficiency is mandatory., • Must be at least 21 years old at the time of application and under 40 at referral. Exceptions may apply for those with current or prior service in federal law enforcement positions covered by special retirement provisions. The Secret Service has determined that age is essential to the performance of this position., • You must obtain a Top Secret Clearance and retain it during your career., • Possess uncorrected visual acuity of no worse than 20/100 binocular, possess corrected visual acuity of 20/20 or better in each eye., • Hearing loss, as measured by an audiometer, must not exceed 25 decibels (A.S.A. or equivalent I.S.O.) in either ear in the 500,1000 and 2000Hz ranges., • Submit to a drug test prior to your appointment and random drug testing while you occupy the position., • Complete 13 weeks of intensive training at the Federal Law Enforcement Training Center(FLETC) in Glynco, GA and 18 weeks of specialized training at the James J. Rowley Training Center in Laurel, MD., • Sign a mobility agreement stating your willingness to accept assignments anywhere within the United States and overseas., • Certify that you have registered with the Selective Service System or are exempt from having to do so, if you are a male applicant born after December 31, 1959.

Optum NY, (formerly Optum Tri-State NY) is seeking an Otolaryngologist (ENT) to join our team in Bethpage, NY. Optum is a clinician-led care organization that is changing the way clinicians work and live. As a member of the Optum Care Delivery team, you’ll be an integral part of our vision to make healthcare better for everyone. At Optum, you’ll have the clinical resources, data and support of a global organization behind you so you can help your patients live healthier lives. We believe you deserve an exceptional career, and will empower you to live your best life at work and at home. Experience the fulfillment of advancing the health of your community with the excitement of contributing new practice ideas and initiatives that could help improve care for millions of patients across the country. Because together, we have the power to make health care better for everyone. Join us and discover how rewarding medicine can be while Caring. Connecting. Growing together. Position Highlights: * Independent practice with a strong affiliation with local tertiary care hospitals that provide a full range of ENT medicine * Offices offer a broad array of state-of-the-art ENT equipment and services * Robust in-house diagnostic testing facility * Full complement of support teams to assist with patient care Responsibilities: * Responsible for diagnosing and treating diseases and injuries of the ear, nose, throat, pharynx, sinuses, larynx, thyroid, oral cavity, salivary glands, and esophagus * Examines patients in clinic and performs surgical procedures as needed * Consult with patients to understand their health concerns and perform specialized tests to diagnose and treat patients * Consult with patient’s primary care physician and other specialists What makes an Optum Care organization different? Be part of a best-in-class employee experience that enables you to practice at the top of your license We believe that better care for clinicians equates to better care for patients? We are influencing change collectively on a national scale while still maintaining the culture and community of our local care organizations? Practice medicine autonomously in an ambulatory setting partnering with primary care, with a sustainable and thriving national health care organization Optum NY/NJ was formed in 2022 by bringing together Riverside Medical Group, CareMount Medical and ProHealth Care. The regional alignment combines resources and services across the care continuum – from preventative medicine to diagnostics to treatment and beyond across New York, New Jersey, and Southern Connecticut. As a Patient Centered Medical Home, Optum NY/NJ can provide patient-focused medical care to the entire family. You will find our team working in local clinics, surgery centers and urgent care centers, within care models focused on managing risk, higher quality outcomes and driving change through collaboration and innovation. Together, we’re making health care work better for everyone. You’ll be rewarded and recognized for your performance in an environment that will challenge you and give you clear direction on what it takes to succeed in your role as well as provide development for other roles you may be interested in. Required Qualifications: * Unrestricted licensure in the state of New York or has New York application in process * Board Certification or board eligibility in Otolaryngology * Active and unrestricted DEA License or ability to obtain prior to start The salary range for this role is $350,500 to $628,000 annually based on full-time employment. Salary Range is defined as total cash compensation at target. The actual range and pay mix of base and bonus is variable based upon experience and metric achievement. Pay is based on several factors including but not limited to local labor markets, education, work experience, certifications, etc. UnitedHealth Group complies with all minimum wage laws as applicable. In addition to your salary, UnitedHealth Group offers benefits such as, a comprehensive benefits package, incentive and recognition programs, equity stock purchase and 401k contribution (all benefits are subject to eligibility requirements). No matter where or when you begin a career with UnitedHealth Group, you’ll find a far-reaching choice of benefits and incentives. OptumCare is an Equal Employment Opportunity employer under applicable law and qualified applicants will receive consideration for employment without regard to race, national origin, religion, age, color, sex, sexual orientation, gender identity, disability, or protected veteran status, or any other characteristic protected by local, state, or federal laws, rules, or regulations. OptumCare is a drug-free workplace. Candidates are required to pass a drug test before beginning employment.

ENT and Allergy Associates, New York & New Jersey's premier ENT and Allergy medical practice, is seeking a dedicated and experienced. ENT and Allergy Associates, LLP is the largest and most comprehensive ear, nose, throat, allergy and audiology practice in the nation with over 60 offices and over 30

With a wide range of services including Adult and Pediatric ENT and Allergy, Voice and Swallowing, Advanced Sinus and Skull Base Surgery, Facial Plastics and Reconstructive Surgery, Treatment of Disorders of the Inner Ear and Dizziness, Asthma-related services, Diagnostic Audiology, Hearing Aid Disp

Job Description Are you ready to turn your passion for helping others into a rewarding career adventure? As a Relocation Specialist, you'll be at the heart of our mission to support senior citizens as they embark on a new chapter of their lives. This is a great opportunity for retirees, stay-at-home parents, or college students who like to make extra cash while helping others but don’t require a consistent schedule. Work hours are project-based, offering variability with the potential to transition into full-time employment based on business needs and your availability. Part-time employees may work from 10 hours to 30+ hours per week. No specific experience necessary. Join our innovative and hands-on team to give peace of mind to local families. Day to Day Responsibilities: Sorting and Downsizing: Assist clients by sorting through their belongings, following their guidance on what to organize, keep, donate, sell, or discard. Approach the process with sensitivity and empathy, respecting the sentimental value of items while helping to streamline their possessions for their new living environment. Organization and Space Optimization: Maximize space and functionality in the clients’ new residences. Implement in-home storage solutions and systems tailored to their needs, ensuring easy access to essential items and promoting a safe and comfortable living environment. Packing and Unpacking: Safely and securely pack clients' belongings for transportation, using Caring Transitions’ approved appropriate materials and techniques to protect fragile or valuable items. Upon arrival at their new residence, unpack items with care, arranging them thoughtfully to create a welcoming and functional living space with the end goal for our clients to be Day One Living. Assisting with Auctions: Sorting, decluttering, cleaning and displaying the contents of each estate. Create and price our well-organized, eye-catching displays. Tasks include setup of all equipment – including tables, risers, lighting and other display equipment. Learn to price common household items and finish through the project by working the estate sale days to sell the contents in the home. Assist with the breakdown of equipment at the end of the sale. Client Communication: Maintain open and transparent communication with your team lead and clients as needed throughout the relocation process. Address any concerns or questions promptly, and offer reassurance and support to alleviate anxieties. Provide a compassionate presence and lend a listening ear to their concerns and needs. Benefits • Starting pay of $18-20/hr depending on experience ($17/hr for training with increase to base rate once full work initiated), • 401K and matching after trial period, • Opportunities for growth, • Flexible scheduling– no two weeks are the same, • Supportive management, • Passionate about Caring Transitions' mission and values, • Showcase outstanding customer service skills, • Display excellent prioritization, organization, and attention to detail, • Motivated to get to know and support the older members of your community, • Thrive in a fast-paced environment that requires multitasking; if every day of work was the same, you would be bored, • Work independently and engage productively with others, • Maintain a professional, compassionate, and empathetic attitude, • Reliable and punctual, • Hold a High School diploma or equivalent, • Valid drivers’ license and reliable transportation to job sites throughout Long Island, • Frequent walking, standing, climbing and/or lifting, • Must be able to stand, bend, kneel repeatedly for long periods of time, • Willing to work in dirty and/or cluttered environments Caring Transitions of Dix Hills is proud to offer relocation services (including packing/unpacking), downsizing, decluttering, estate sales and auctions, home cleanouts and more! Our specialty is working with seniors in our community and their families. Our goal is to respectfully and compassionately support those who are transitioning through various life stages, providing peace of mind and assistance with a smooth process so that they can focus on what’s next. Powered by JazzHR iCAZlmALe0

New York Eye and Ear Infirmary of Mount Sinai is ranked No. Newsweek's "The World's Best Smart Hospitals" ranks The Mount Sinai Hospital as No. Serves as a liaison with all levels of Mount Sinai Medical Center to ensure efficient delivery of non-financial services to practices of participating physi

New York Eye and Ear Infirmary of Mount Sinai is ranked No. The Mount Sinai Health System is committed to fostering an environment where everyone can contribute to excellence. When you join us, you become part of Mount Sinai's unparalleled legacy of achievement, education, and innovation as we work

With a wide range of services including Adult and Pediatric ENT and Allergy, Voice and Swallowing, Advanced Sinus and Skull Base Surgery, Facial Plastics and Reconstructive Surgery, Treatment of Disorders of the Inner Ear and Dizziness, Asthma-related services, Diagnostic Audiology, Hearing Aid Disp

Job Description Job Title: Welder Job Description Join a dynamic manufacturing company specializing in fabricating steel frames and cabinets for server rooms, data centers, and other data storage applications. As a welder, you will be a part of a growing team driven by increasing demands in the data and technology industry. Responsibilities • Perform TIG and MIG welding on stainless steel and aluminum metals., • Execute straight and plug welds to fabricate frames and shelving according to customer specifications., • Read and interpret blueprints for welding projects., • Proficiency in MIG and TIG welding., • Experience working with stainless steel and aluminum., • Ability to read and interpret blueprints., • Experience in assembly and fabrication. Employees are encouraged to work overtime from Monday to Friday, and there are excellent opportunities for career advancement. The company promotes from within and offers a 401k matching program up to 5%, a yearly merit increase of 2%, and an annual bonus following a performance review. Benefits begin the first month after permanent employment, and there is flexibility to transfer to multiple locations or different departments across the country. Work Environment Each welder has their own workspace, toolbox, and Personal Protective Equipment (PPE). Welders are expected to maintain a clean and organized work area. Required attire includes gloves, steel toe boots, eye protection, and ear protection as needed. The facility is very clean with ample space for production and materials, and excellent ventilation, especially over the welding area. This opening is for the 1st shift: 7:00am - 3:30pm. We will call you after you apply! Job Type & Location This is a Contract to Hire position based out of Farmingdale, NY. Pay and Benefits The pay range for this position is $21.50 - $25.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Farmingdale,NY. Application Deadline This position is anticipated to close on Mar 31, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionDescription: Job Title: Manager, Purchasing Cox & Company Inc is seeking a skilled and strategically minded Purchasing Manager to join our growing Aerospace Manufacturing Team. Reporting directly to the Director of Operations, the Purchasing Manager will be responsible for overseeing the procurement of materials, components, and outside processing services necessary for production and the development of new projects. This role plays a critical part in ensuring Cox’s Supply Chain remains efficient, cost-effective, and aligned with the company’s high standards for quality and performance. The ideal candidate will have a strong background in aerospace supply chain management, exceptional negotiation skills, and a proactive approach to vendor management and continuous improvement initiatives. Responsibilities: • Develop and implement purchasing strategies and policies, • Manage the procurement process from start to finish, including sourcing, negotiating, and contracting, • Build and maintain relationships with suppliers and vendors, • Monitor inventory levels and ensure that materials are ordered in a timely manner, • Collaborate with other departments to ensure that purchasing needs are met, • Analyze market trends and identify opportunities for cost savings, • Ensure compliance with all purchasing regulations and policies Requirements: • Bachelor's degree in Business Administration, Supply Chain Management, or related field, • Strong negotiation and communication skills, • Ability to work independently and manage multiple projects simultaneously, • Proficient in Microsoft Office and purchasing software, • Knowledge of purchasing regulations and policies We are an equal opportunity employer and welcome applicants from all backgrounds to apply. If you are a self-starter with a passion for purchasing and a desire to work in a fast-paced environment, we encourage you to apply for this exciting opportunity. Requirements: Duties and Responsibilities • Develop and execute sourcing strategies to meet production and business needs, • Manage vendor selection, negotiation, contract development, and supplier performance, • Support New Product Introduction by working directly with Engineering, including quote material providers and outside processing providers to support new projects, • Collaborate closely with Engineering, Quality, and Production teams to ensure purchased components meet technical specifications and quality standards, • Evaluate and mitigate supply chain risks, including supply disruptions and cost fluctuations, • Maintain compliance with all industry standards and regulations (AS9100, ITAR, customer specific requirements), • Track and report key performance metrics related to supplier performance, quality, cost savings, commodity pricing trends and inflation, • Develop and maintain strong relationships with strategic suppliers and partners, • Support and introduce continuous improvement initiatives across the procurement and supply chain functions, • 10+ years’ experience in managerial role in procurement in the aerospace, defense, or advanced manufacturing industry, • Strong knowledge of aerospace regulatory compliance, including but not limited to AS9100, NADCAP, ITAR, DFARS, EAR, and FAA/EASA, • Excellent negotiation skills, • Experience managing complex supplier relationships and multi-million dollar purchasing budgets, • Baccalaureate in Business Administration or Supply Chain Management, • ISM CPSM certification preferred, • Competitive salary, • Health, dental, and vision insurance, • 401(k) with company match, • Paid time off and holidays, • Opportunities for career growth and development