Electrical field jobs in Garden City, New YorkCreate job alerts

Job Description Are you mechanically inclined with maintenance experience, and looking for a long term career with opportunities for hands on learning and growth? Our Pump & Motor Repair Shop is now hiring for our field mechanic team. Mechanic Responsibilities Include : • Assess machinery to accurately diagnose and repair issues, • Liaise with clients to determine their requirements and communicate defects or problems, • Provide routine inspections of equipment and inform clients of any issues, • Keep an accurate log of all work performed, • Install replacement bearings, seals, shafts, and gaskets, • Replace and wire electric motors, • Adhere to company work safety policies, • Complete jobs both in our shop and at job sites, • Respond to work orders for troubleshooting, repair and feedback to Supervisor, • Mechanic will be responsible to make emergency repairs within area of knowledge and responsibility, • Familiarity with hand tools, power tools, disassembly, multimeter, etc. Mechanic Qualifications : • Competent with the use of hand tools, i.e. jigsaw, drills, wrenches, screwdrivers, • Maintenance experience relating to HVAC, plumbing, and/or electrical, • Ability to follow company processes, procedures, and policies, • Ability to work well both independently and on a team, have a can-do attitude, and be willing to learn, • Excellent time management skills and ability to multi-task and prioritize work, • Strong organizational and planning skills in a fast-paced environment, • Attention to detail and problem solving skills, • Valid and clean NYS Driver's License to operate company vehicles (sprinter van) Maintenance Technician Physical Requirements : • Ability to stand for prolonged periods of time, • Ability to lift 50 pounds, • Ability to work on elevated platforms, • Ability to climb ladders, • This position may require standing, stooping, bending, kneeling, crouching and/or reaching, • You may be exposed to dust, loud noises, and hot and cold conditions Location: On-Site in Garden City Park & Field Work Pay: $18 - $25/hour Schedule: Full-Time. Monday - Friday, 7 AM - 3:30 PM with overtime opportunities. Benefits: Health insurance (medical, dental, vision), EAP, PTO, paid holidays, 401K, ESOP (Employee Stock Ownership Plan) We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Mission QSAC is a New York City and Long Island based nonprofit that supports children and adults with autism, together with their families, in achieving greater independence, realizing their future potential, and contributing to their communities in a meaningful way by offering person-centered services. QSAC pursues this mission through direct services that provide a supportive and individualized setting for children and adults with autism to improve their communication, socialization, academic and functional skills. Job Summary If you are a skilled and handy maintenance worker who demonstrates safety, dedication and follow-through then we would like to talk to you! QSAC is looking for a skilled and seasoned maintenance worker who has hands-on experience in maintenance trades that include, but are not limited to carpentry, plumbing, electrical, general woodworking, various repairs, wall installation, painting and minor internal construction. The Maintenance office is based in Jamaica, Queens, but travel to other locations is required. Vehicle will be provided for travel to programs. Salary - $21.00 - $24.00 an hour Responsibilities include, but are not limited to: Maintenance • Complete projects including plumbing, carpentry, moving furniture, deliveries, construction, painting and general repairs in an efficient and timely manner, • Complete work orders efficiently the first time - follow logical steps like patching after painting after laying carpet, • Maintain cleanliness throughout facilities, performing cleaning duties as assigned, • Review work orders after heading to work site to ensure all materials and tools are available, • Demonstrate safety and care of equipment and supplies to protect from damage and theft, • May be required to cover general cleaning and custodial tasks, • Prioritize work to complete time sensitive issues first, • Complete work orders efficiently the first time - follow logical steps like patching after painting after laying carpet., • Utilize troubleshooting skills to determine best way to fix problems and communicate delays or emergency reassignments to supervisor, • Identify problems in the facility and inform supervisor, as soon as they are discovered, • May be required to work independently in the field and remain focused on assigned tasks and priorities, • Ability to safely lift 50 lb. items and equipment required, • High school diploma/GED, preferred, • Must have 2-3 years’ general maintenance experience in carpentry, electrical, plumbing, general woodworking, various repairs, wall installation, painting and minor internal construction skills, • Must have valid Driver's License with excellent driving history, • Requires the ability to read, write and communicate effectively with others in English language Benefits Our benefits go beyond health and retirement. You will be joining a passionate community of professionals and staff who support each other in a challenging and rewarding work culture. • Competitive salary, • Medical, Dental and Vision Insurance have very low out of pocket costs (for FT staff), • Generous Paid Time Off policy (for full time staff) Start with 20+ days annually, • Group Life Insurance and Long Term Disability (for FT staff), • Flexible Spending Accounts (for FT staff), • Pre-Tax Commuter Benefits, • 403(b) Retirement with Employer Discretionary Match (for FT staff), • Opportunities for career advancement QSAC is an Equal Opportunity Employer (EOE) Mission-Oriented. Results-Driven. Collaborative. Passionate. We Are QSAC. To easily apply: please send resume to

Job Description Overview Opportunity: Maintenance Technician Perform preventative and repair maintenance work to ensure the hotel is maintained according to established quality and sustainability standards while treating guests in a warm and friendly manner. Overnight shifts available. Your Growth Path Engineer - Engineering Supervisor - Chief Engineer Your Focus • Assist with preventative maintenance and complete work orders related to replacing and repairing ceiling tiles, sheet-rock and wallpaper., • Install or repair sheetrock and other wall coverings., • Paint designated areas and items., • Replace basic electrical fixtures, light switches, receptacles, light bulbs and fixtures., • Perform minor plumbing functions., • Focus on guest satisfaction scores and work toward increasing departmental and overall guest satisfaction., • Follow Service Recovery Guidelines., • Maintain the curb appeal including but not limited to snow removal, lawn care, gardening and trash removal., • Follow sustainability guidelines and practices related to HHM’s EarthView program., • Practice safe work habits, wear protective safety equipment and comply with MSDS and OSHA standards., • High School diploma and Trade school course work in related field preferred., • Work schedule varies and may include working on holidays and weekends and alternate shifts. People Are Our Capability – Hearts That Serve – Only Excellence – Stay Nimble - Own It

Job Description General Summary Operates, maintains and repairs an operational engineering plant which provides a facility with such services as heat, air-conditioning, steam, and emergency power. Performs preventative and corrective maintenance on plant equipment. Operates one or more boilers, chillers, generators and associated equipment to produce steam, chilled water and electrical power for the facility. Essential Duties and Responsibilities • Observes and interprets reading on gauges and meters which register various aspects of boiler operations and the Central Energy Plant (CEP) Operations., • Adjusting controls to ensure safe and efficient operations of the plant that meets the demands for the utilities provided., • Logs the various aspects of the system’s operation, keeping the boilers, chillers, machinery and other system equipment in good working order., • Maintains the log, in which various aspects of plant operations are recorded., • Required to be skilled in the repair of rotating machinery, steam systems, compressed gases and water treatment systems, (i.e., clean, oil, repair or assist in repairs to plant equipment)., • Must be fully knowledgeable of the required actions in the event of the loss of any of the regularly supplied utilities services., • Treatment of cooling tower and boiler water with chemicals and analyze the water for such things as acidity, conductivity, hardness, biological growth and alkalinity., • Maintain the general cleanliness and appearance of the Plant., • Must be knowledgeable in troubleshooting, disassembling, tube cleaning and reassembling of industrial sized boilers and chillers., • Assists others as part of the maintenance team as required and performs other duties assigned according to personal qualifications., • Excellent oral and written communication skills., • Knowledge of computer software programs to include Word, Excel, Power Point and Outlook required., • Experience with a Facility Computerized Maintenance Management System software (CMMS) highly desired., • High School Graduate, technical or trade school certificate in related field desired., • Previous experience in operating and maintaining industrial sized boilers, chillers and associated equipment., • Must be able to lift 50 lbs., squat, bend, stoop and kneel for short periods, climb a ladder, stand for long periods of time, constant arm extensions. We maintain a drug-free workplace and perform pre-employment substance abuse testing. CBRE Government and Defense is thrilled at the opportunity for you to apply to one of our roles. The rate for this position is $49.94. This position may also be eligible for a wide range of benefits based on applicable bargaining unit agreements. This description is not intended to be an “all inclusive” list of the accountabilities of the job described. Rather, it describes the general nature of the job. In addition, some aspects of this job may change over time, according to business needs, and these changes may not be recorded immediately. The requirements stated represent the minimum levels of knowledge, skills and/or abilities to qualify and satisfactorily perform this job. THIS DOCUMENT SHOULD NOT BE CONSTRUED AS CREATING A CONTRACT OF EMPLOYMENT BETWEEN CBRE GOVERNMENT & DEFENSE SERVICES AND ANY OF ITS EMPLOYEES OR OTHERWISE ALTERING AN EMPLOYEE’S AT WILL EMPLOYMENT RELATIONSHIP WITH CBRE GOVERNMENT & DEFENSE SERVICES.

Job DescriptionLead Fleet Mechanic Automotive and Machinery Location: Hempstead, NY (In-person, on-site at main facility; field work as needed across Long Island and NYC service areas) Employment Type: Full-Time, Non-Exempt (Hourly) Schedule: 40 hours per week standard (typically Monday through Friday, shop hours); overtime at time-and-a-half as needed for peak seasons, emergencies, or high demand Compensation: $35 to $45 per hour (based on experience, certifications, and skills) Join a stable, family-owned business with more than 65 years of trusted service in the irrigation and landscaping industry. With a fleet of about 80 vehicles and pieces of equipment (service trucks, light-duty vehicles, trailers, small engines, skid steers, loaders, pumps, and irrigation machinery), you will keep operations running smoothly for a team of 90 to 95 people. This hands-on lead position includes preventive maintenance, diagnostics, repairs, and the opportunity to perform in-house New York State vehicle inspections once the facility becomes a licensed inspection station. Key Responsibilities • Perform preventive maintenance, diagnostics, and repairs on a mixed fleet of gasoline and diesel trucks, vans, trailers, small engines, and landscaping/construction machinery., • Troubleshoot and fix mechanical, electrical, hydraulic, and drivetrain problems in both shop and field settings (including job-site repairs during busy seasons)., • Conduct independent diagnostics using scan tools, multimeters, pressure gauges, and OEM software., • Handle major repairs such as engine rebuilds, transmission work, hydraulic overhauls, and component replacements when required., • Prioritize and manage multiple breakdowns efficiently in a fast-paced, high-volume environment., • Keep accurate repair records, track parts inventory, and document work for compliance and efficiency., • Perform (or prepare to perform) New York State annual safety and emissions inspections on company vehicles once the facility is licensed as an inspection station., • Work independently with minimal supervision while coordinating with operations teams., • Maintain strict safety standards and company protocols on every job., • Be available for overtime, emergency field repairs, and peak-season demands.Required Qualifications, • 5 or more years (10 or more years preferred) of hands-on experience as an automotive, fleet, or machinery mechanic., • Proven expertise with gasoline and diesel engines, hydraulic systems, electrical diagnostics (including CAN bus where applicable), and drivetrain repairs., • Valid New York State driver's license (clean record preferred)., • New York State Certified Motor Vehicle Inspector (Group 1/Safety Inspector) certification required (or ability and willingness to obtain promptly; company supports the process to become a licensed private fleet inspection station for internal efficiency)., • Strong problem-solving and diagnostic skills (real troubleshooting, not just parts swapping)., • Physical ability to lift heavy objects, work in varying outdoor conditions, and perform field repairs., • Reliable, punctual, safety-conscious, and organized with good communication skills for clear reporting.Preferred Qualifications, • Experience with heavy equipment, construction machinery, skid steers/loaders, small engines, trucks/light vehicles, or irrigation-related equipment., • ASE certifications, CDL, welding/fabrication skills, or major component rebuild experience., • Familiarity with fleet maintenance in service industries (landscaping, irrigation, construction)., • Comfort working on both vehicles and specialized machinery.What We Offer, • Hourly pay of $35 to $45 based on experience, certifications, and skills., • Overtime at time-and-a-half during peak seasons, emergencies, or busy periods., • Employer-sponsored health insurance (partial contribution), dental (employee-paid), 401(k) with partial match, paid time off, and potential tool allowances or other perks., • Stable, year-round work in a long-standing family-owned business with a strong reputation., • Opportunity to grow into a lead role in a supportive, collaborative environment.If you have the technical skills, leadership mindset, and drive to keep a large fleet and field teams moving reliably, apply today. This is a chance to make a direct impact in a respected, growing operation.

Job Description Lead Fleet Mechanic - Automotive and Machinery Location: Hempstead, NY (In-person, on-site at main facility; field work as needed across Long Island and NYC service areas) Employment Type: Full-Time, Non-Exempt (Hourly) Schedule: 40 hours per week standard (typically Monday through Friday, shop hours); overtime at time-and-a-half as needed for peak seasons, emergencies, or high demand Compensation: $35 to $45 per hour (based on experience, certifications, and skills) Join a stable, family-owned business with more than 65 years of trusted service in the irrigation and landscaping industry. With a fleet of about 80 vehicles and pieces of equipment (service trucks, light-duty vehicles, trailers, small engines, skid steers, loaders, pumps, and irrigation machinery), you will keep operations running smoothly for a team of 90 to 95 people. This hands-on lead position includes preventive maintenance, diagnostics, repairs, and the opportunity to perform in-house New York State vehicle inspections once the facility becomes a licensed inspection station. Key Responsibilities • Perform preventive maintenance, diagnostics, and repairs on a mixed fleet of gasoline and diesel trucks, vans, trailers, small engines, and landscaping/construction machinery., • Troubleshoot and fix mechanical, electrical, hydraulic, and drivetrain problems in both shop and field settings (including job-site repairs during busy seasons)., • Conduct independent diagnostics using scan tools, multimeters, pressure gauges, and OEM software., • Handle major repairs such as engine rebuilds, transmission work, hydraulic overhauls, and component replacements when required., • Prioritize and manage multiple breakdowns efficiently in a fast-paced, high-volume environment., • Keep accurate repair records, track parts inventory, and document work for compliance and efficiency., • Perform (or prepare to perform) New York State annual safety and emissions inspections on company vehicles once the facility is licensed as an inspection station., • Work independently with minimal supervision while coordinating with operations teams., • Maintain strict safety standards and company protocols on every job., • 5 or more years (10 or more years preferred) of hands-on experience as an automotive, fleet, or machinery mechanic., • Proven expertise with gasoline and diesel engines, hydraulic systems, electrical diagnostics (including CAN bus where applicable), and drivetrain repairs., • Valid New York State driver's license (clean record preferred)., • New York State Certified Motor Vehicle Inspector (Group 1/Safety Inspector) certification required (or ability and willingness to obtain promptly; company supports the process to become a licensed private fleet inspection station for internal efficiency)., • Strong problem-solving and diagnostic skills (real troubleshooting, not just parts swapping)., • Physical ability to lift heavy objects, work in varying outdoor conditions, and perform field repairs., • Experience with heavy equipment, construction machinery, skid steers/loaders, small engines, trucks/light vehicles, or irrigation-related equipment., • ASE certifications, CDL, welding/fabrication skills, or major component rebuild experience., • Familiarity with fleet maintenance in service industries (landscaping, irrigation, construction)., • Hourly pay of $35 to $45 based on experience, certifications, and skills., • Overtime at time-and-a-half during peak seasons, emergencies, or busy periods., • Employer-sponsored health insurance (partial contribution), dental (employee-paid), 401(k) with partial match, paid time off, and potential tool allowances or other perks., • Stable, year-round work in a long-standing family-owned business with a strong reputation., • Opportunity to grow into a lead role in a supportive, collaborative environment.

Job DescriptionPower-Flo Technologies is seeking a motivated individual to join our team as an HVAC Controls Technician. We are a two location temperature controls distributor specializing in providing engineering, materials, and startup assistance for temperature control systems. We are looking for someone to work independently in the field to startup, service, and support these systems in coordination with our in-house engineering team. What Will Make You Successful in This Role? • Experience and certification with programming either Johnson FX controllers (CCT) (preferred), Honeywell Spyder, and/or Niagara AX/N4 (any brand)., • Experience with ACAD, or similar CAD software., • Knowledge of industry-standard communication protocols such as BACnet MSTP, BACnet IP, Niagara, JCI N2, Modbus, Lon, Etc., • Niagara N4 certification., • 3 years of building automation experience required., • Strong understanding of commercial HVAC systems operations., • Ability to read mechanical prints and schematics., • Ability to work independently and in a team setting., • Basic knowledge regarding use of a PC (Microsoft Word, Excel, Outlook)., • Competent with the use of electrical test equipment, i.e., Multi meter, shop tools, hand tools, pneumatic tools., • Mechanical aptitude required., • The ability to troubleshoot basic electric and electronic circuitry including reading and interpreting electrical and electronic diagrams., • Valid and clean NYS Driver's License to operate company vehicles., • Ability to Stand for 8 Hours, • Ability to lift 50 pounds, • Ability to work on elevated platforms, • Ability to climb ladders, • This position may require standing, stooping, bending, kneeling, crouching and/or reaching Salary Range: $60,000 – $100,000/year Benefits • Health Insurance (medical, dental, vision), • PTO Program and Paid Holidays, • 401K, • EAP, • ESOP (Employee Stock Ownership Plan) We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description We are Universe Home Services, a proud local business serving homeowners across Nassau and Suffolk counties with expert HVAC, Plumbing and Electrical solutions. Located in Farmingdale. Now Hiring: Full Time Residential HVAC Maintenance Technician. The HVAC Maintenance Technician is responsible for performing routine maintenance, inspections, seasonal tune-ups on residential heating and cooling systems. The goal is to ensure systems are operating efficiently, safely, and reliably while providing excellent customer service. Key Responsibilities: • Perform seasonal maintenance and tune-ups on HVAC systems, including cleaning, inspecting, and testing equipment., • Diagnose system issues and troubleshoot mechanical and electrical problems., • Check system components such as thermostats, electrical connections, condensate drains, motors, filters, and refrigerant levels., • Identify potential issues and recommend repairs or replacements when necessary., • Maintain accurate records of all maintenance activities, inspections, and customer interactions., • Follow company safety procedures and adhere to all local, state, and federal HVAC codes., • Communicate clearly and professionally with customers about findings, recommendations, and system performance., • Ensure all tools, equipment, and vehicles are properly maintained and organized., • High school diploma or equivalent (technical training preferred)., • Minimum of 3 years of experience in HVAC maintenance or related field., • Valid driver's license with a clean driving record., • Strong knowledge of HVAC systems, components, and maintenance procedures., • Excellent communication and customer service skills., • Ability to work independently and manage time effectively. We offer a competitive salary plus a great benefits package including: • Medical, Dental, and Vision., • 401(k) Match, • PTO and paid holidays, • STD, LTD, Life, and AD&D insurance., • Referral program Who We are: Universe Home Services has been in business for 70 years (and counting), helping homeowners with their HVAC, Plumbing and Electrical needs. We are consistently growing in terms of services, employees, and customers and with that growth we have maintained valued employees for over 20 years! Universe Home Services is an equal opportunity employer. We bring unique talents together to build something special.

Job Description We are Universe Home Services, a proud local business serving homeowners across Nassau and Suffolk counties with expert HVAC, Plumbing and Electrical solutions. Located in Farmingdale. Now Hiring: Full Time Residential HVAC Service Technician. All shifts: 8:00am - 4:00pm & 2:00pm - 10:00pm. Monday - Friday - Weekends and Nights available! You will take the lead in troubleshooting and repair efforts, identifying and diagnosing HVAC issues on residential units. Handles warranty services efficiently and responds promptly to perform emergency repairs. What you Will do: • Perform start-ups of newly installed HVAC Systems., • Troubleshoot system issues and diagnose problems., • Perform minor repairs and component replacements., • Handle warranty work and callbacks professionally and efficiently., • Ensure all systems operate safely and according to manufacturer specifications., • Maintain accurate service records and documentation., • Communicate findings and recommendations clearly to customers and management., • Diagnose and repair HVAC units., • Perform HVAC service, repairs, and maintenance for residential clients., • Provides on the best solution for the customer., • Collaborate with the team to ensure projects are completed efficiently., • Maintain communication with dispatch, your manager, parts, and installation teams., • 3-5 years of experience in related field., • High School Diploma or equivalent, • Valid Driver's license., • Knowledge of HVAC codes and proper application; knowledge of proper electrical and HVAC safety., • Must have strong math skills., • Knowledge of Gas systems and appliances., • Ability to work independently and as part of a team, • Ability to develop heating, ventilating, and air conditioning system modification plans., • Performs preventive maintenance on Gas heating systems, and associated equipment., • Ability to explain technical information to customers., • Ability to effectively communicate information and respond to customer questions., • Strong listening and communication skills., • Teamwork oriented., • Ability to thrive in a fast-paced, customer-focused work environment. We offer a competitive salary plus a great benefits package including: • Medical, Dental, and Vision., • 401(k) Match, • PTO and paid holidays, • STD, LTD, Life, and AD&D insurance., • Referral program Who We are: Universe Home Services has been in business for 70 years (and counting), helping homeowners with their HVAC, Plumbing and Electrical needs. We are consistently growing in terms of services, employees, and customers. Universe Home Services is an equal opportunity employer. We bring unique talents together to build something special.

Job DescriptionExperienced Reefer Technician (Carrier & Thermo King) Relocation Assistance Available Up to $5,000 Miami, FL Were looking for a skilled and dependable Reefer Technician to join our team. If you take pride in your work, enjoy solving complex mechanical issues, and want to be part of a company that values professionalism and teamwork, this is a great opportunity to grow your career. What Youll Do • Diagnose, troubleshoot, maintain, and repair Carrier and Thermo King refrigeration units and APUs, • Perform diesel engine preventative maintenance, including:, • Fuel system diagnostics, • Cooling system diagnostics, • Mechanical coupling systems, • Work both in-shop and in a mobile service environment, • Collaborate with service writers, leadership, parts teams, drivers, vendors, and customers to ensure top-level service, • Accurately complete and submit all required paperwork in a timely manner, • Follow all company safety standards and procedures, • Support additional shop or field needs as assignedWhat Were Looking For, • Minimum 2+ years of experience working on Carrier and/or Thermo King reefers, • EPA 608/609 Certification, • Strong ability to read and interpret electrical and refrigeration schematics, • Willingness to participate in rotating night/weekend on-call schedule, • Must have your own set of basic tools, • Ability to lift and work in both shop and mobile environments without restrictions, • Valid drivers licenseWhat We Offer, • Relocation Assistance Up to $5,000, • Company-provided service vehicle + gas card, • Comprehensive medical, dental, and vision coverage, • 401(k) with company match, • Paid time off + paid holidays, • A supportive, team-oriented environment where your skills are valuedWeve built a workplace where people take pride in what they do and support each other to succeed. If youre someone who believes in doing the job right the first time and delivering great service to customers, wed like to connect.

Job DescriptionBenefits: • Company car, • Flexible schedule, • Free uniforms, • Training & development Experienced HVAC Service Technician (Residential/Light Commercial) $35$55/hr + OT | Take-Home Van | Steady Work Gold Star Mechanical is hiring an experienced HVAC Service Tech. Were looking for someone who can diagnose and repair systems efficiently, communicate clearly with customers, and take ownership of the job. What Youll Do • Diagnose and repair residential and light commercial HVAC systems, • Perform maintenance and troubleshoot: electrical, airflow, refrigerant, controls, • Communicate findings and options clearly to office, • Keep clean notes and photos in work orders, • Maintain safe, professional work practices What Were Looking For • 3+ years HVAC field experience (service-focused), • Strong diagnostic ability (not just parts-changing), • Valid drivers license + clean driving record, • Professional, reliable, and customer-friendlyNice to Have, • Experience with mini-splits/VRF, rooftop units, boilers, controls, • Soldering/brazing experience, • Install experience a plusLocation / Service Area, • Based in: Nassau County, NY, • Typical service area: Long Island/Queens/Brooklyn

Company Overview: MaxSolar is a leading provider of Operations & Maintenance (O&M), Asset Management and Technical Services for solar photovoltaic and battery storage systems in the commercial marketplace. As a comprehensive services provider, MaxSolar supports client needs throughout the entire project life cycle. Our programs ensure that system owners receive the maximum energy, environmental, and financial benefits from their assets. Position Overview: The Field Technician is required to troubleshoot and resolve solar PV and battery storage system issues, including emergency repairs/corrective maintenance, design change requirements, and equipment modifications/upgrades. Position will also be responsible for Preventative Maintenance activities to support system performance of O&M portfolio, as well as, QA/QC inspections, system commissioning and pre-con site assessments. Responsibilities: As a Solar Technician/Electrician within the Operations and Maintenance team, you will play a critical role in ensuring the safe, efficient, and reliable performance of solar energy systems. Key responsibilities include: • Performing routine maintenance, inspections, and system checks on solar equipment to ensure optimal performance., • Operating, maintaining, troubleshooting, and repairing equipment issues identified during inspections or daily operations., • Conducting electrical testing, measurements, and diagnostics to identify and resolve electrical issues., • Utilizing a basic understanding of system monitoring platforms to review and analyze performance data, identify trends, and flag potential concerns., • Preparing formal documentation of all field activities, task procedures, and maintenance actions., • Adhering to all safety protocols, company policies, and industry standards., • Providing technical guidance and support to junior technicians as needed., • Demonstrating strong attention to detail in all aspects of work., • Assisting with QA/QC activities, commissioning of new solar installations, and site assessments., • Managing preventive maintenance tasks and deliverables, including independently performing basic electrical tasks., • Conducting advanced testing and troubleshooting, including work on electrically live devices when required and permitted., • Performing lockout/tagout (LOTO) procedures in accordance with established guidelines and safely releasing systems for troubleshooting., • Executing work instructions for both electrical and mechanical repairs on on-site equipment., • Working within distribution-level systems up to 600 VAC and within PV array limits up to 1000 VDC., • Applying low-voltage test equipment, including conducting pre- and post-use inspections, safely connecting instruments, and interpreting test results. Qualifications: • Associates Degree in Engineering or equivalent Technical Certification/Training, • Licensed Electrician and NABCEP certification preferred., • Valid Driver’s license with clean record., • One (1) year minimum experience installing/maintaining commercial scale battery storage systems preferred., • Ability to work remotely and independently., • Project management/field operations management experience preferred., • Previous experience working with power electronic conversion equipment., • Experience with metering and test equipment., • Experience with centralized DAS/SCADA/EMS control systems., • Working knowledge of Commercial Power Plant Operations., • Ability to read electrical/mechanical drawings, equipment manuals and technical specifications., • Familiarity with CMMS based work order/ticketing systems and mobile reporting tools., • Working knowledge of NEC and local building codes and OSHA safety standards (OSHA 30 preferred)., • Ability to efficiently troubleshoot system failures., • Proficient with the use of the Microsoft Office Suite (Word, Excel, PowerPoint, Outlook)., • Must be willing and able to climb ladders, stairs and work on rooftops., • Ability to work in extreme weather conditions. Benefits: • Competitive salary and performance-based incentives, • Health, dental, and vision insurance, • Retirement savings plan, • Opportunities for professional development and career advancement

This Jobot Job is hosted by: Christie Bauer Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $90,000 - $170,000 per year A bit about us: We are a growing electrical contractor looking for an Estimator. Why join us? Competitive Pay Benefits PTO Paid Holiday and more! Job Details Job Details: We are currently seeking a highly motivated and experienced Estimator for our dynamic team. This role offers the opportunity to work on diverse and challenging projects while utilizing your expertise in the electrical engineering field. With your experience in the commercial construction sector, you will play a vital role in the preparation and submission of electrical estimates. As an integral part of our team, you will have the opportunity to work closely with our project managers and other professionals to ensure the successful completion of our projects. Responsibilities: • Prepare detailed and accurate electrical estimates for commercial construction projects., • Perform electrical take-offs and develop comprehensive bid packages., • Utilize your knowledge of the National Electric Code (NEC) to ensure compliance in all projects., • Manage change orders and communicate any changes or potential risks to the project manager promptly., • Participate in project management activities, including planning, scheduling, and monitoring of projects., • Collaborate with the project management team to ensure that projects are completed on time and within budget., • Regularly review and update estimates, taking into account any changes in materials, labor, or other factors., • Bachelor's degree in Electrical Engineering or a related field preferred., • A minimum of 2 years of experience in electrical estimating for commercial construction projects., • Proficient in NEC and other relevant codes and regulations., • Experience in project management and familiarity with project management tools and software., • Strong knowledge of electrical systems, materials, and the latest industry trends., • Proficient in electrical take-off and bid preparation., • Experience managing change orders and communicating changes effectively. If you are a seasoned Electrical Estimator with a passion for excellence and a knack for details, we would love to hear from you. This is a fantastic opportunity to contribute to a growing company while advancing your career in the engineering industry. Apply today and let's build the future together! Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Total Talent Solutions Now hiring HVAC Technician - Direct Hire Location Elmont, NY Pay Rate: $33.00 - $38.00 per hour Monday-Friday, 8:00 AM - 4:30 PM (flexibility required) Join Staffmark and discover a HVAC Technician position where your work matters and your contributions are truly appreciated. Looking for a HVAC Technician job where you're more than just a number on a clipboard? Here's the deal: we're hiring dependable team members who keep everything running - and we know the work doesn't happen without you. The day begins. You step in with purpose. Here's what it takes to succeed with us. • 5+ years of commercial HVAC and general maintenance experience, • EPA Universal Certification required, • Valid driver's license and clean driving record, • Strong knowledge of HVAC systems, electrical, and building maintenance, • Lift up to 50 lbs regularly; work in indoor/outdoor environments, • Perform preventive maintenance, troubleshooting, and repair of commercial HVAC systems (package units, split systems, boilers), • Diagnose and service mechanical, electrical, and control systems, • Inspect and repair components such as compressors, motors, belts, and electrical circuits, • Handle refrigerant systems in compliance with EPA standards, • Complete minor plumbing, electrical, and carpentry repairs, • Use mobile technology to manage work orders, service reports, and inspections, • Medical, dental, and vision coverage, • Health Savings Account (HSA) and Flexible Spending Accounts (FSA), • 401(k) Retirement Savings Plan, • Life and disability insurance, • Employee Assistance Program (EAP) Join a Team That Works for You At Staffmark, we're more than just a staffing company-we're your career partner. As part of RGF Staffing and Recruit Group, anHR powerhouse behind big names like Indeed and Glassdoor, we've got the muscle and the know-how to get you where you want to go. With more than half a century of experience and a track record of putting hundreds of thousands of people to work every year, we've got your back. Whether you're looking to level up, switch gears, or just get to work fast, we make it happen. Join us and experience the advantage of working with a trusted name in recruiting-because your success is our success. The base pay range listed reflects what we reasonably expect to offer for this role. Actual pay may vary based on location, experience, and performance. Depending on the position, benefits may include medical, dental, and vision coverage; retirement and savings plans; paid holidays and time off; supplemental insurance; and additional wellness or incentive programs. At Staffmark, we connect hardworking people with great companies, creating opportunities that make a lasting impact. Staffmark is an equal opportunity employer. Allapplicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other legally protected status. Staffmark offers reasonable accommodations for qualified individuals with disabilities; contact your local branch for inquiries. Staffmark is an E-Verify employer. See our Privacy Notice for Candidates and Employees/Contractors at . By applying, you consent to receive AI-generated and non-AI-generated calls, texts, or emails from Staffmark Group, its affiliates, and partners. Frequency varies and message/data rates may apply. Reply STOP to cancel or HELP for help.

Job DescriptionGreetings from Donato Technologies Inc. We have an immediate opening with my client. If you are looking for a new project, please send me a copy of your updated resumes Electrical Testing TechnicianLocation: Nassau County, NY (Remote with fieldwork as required) Employment Type: Full-Time About the Role We are seeking a highly skilled NETA III Electrical Testing Technician to join a leading electrical testing and maintenance services provider. The ideal candidate will have extensive hands-on experience with high, medium, and low-voltage systems, ensuring the safe and reliable performance of electrical equipment across a variety of client sites. This role is best suited for professionals who excel in technical diagnostics, field testing, and team leadership, while adhering to industry standards and safety protocols. Key Responsibilities • Electrical Testing & Diagnostics, • Perform advanced testing on electrical equipment including circuit breakers, transformers, switchgear, motors, PTs, CTs, and cables., • Utilize specialized testing equipment such as Doble power factor test sets, low resistance ohmmeters, VLF test sets, insulation resistance testers, CT ratio/saturation devices, DC hi-pot testers, TTR instruments, and primary/secondary injection tools., • Troubleshooting & Repairs, • Identify, analyze, and resolve electrical issues using schematics, manuals, wiring diagrams, and engineering input., • Recommend and oversee repairs or replacements to ensure optimal system performance., • Maintenance & Compliance, • Inspect, clean, and maintain electrical equipment in compliance with industry and NETA standards., • Conduct risk assessments and enforce OSHA and company safety protocols., • Project Management & Leadership, • Oversee field service projects, ensuring on-time and within-scope delivery., • Mentor junior technicians and support their technical growth., • Collaborate with engineers, project managers, and clients to align project execution with client needs., • Documentation & Reporting, • Maintain accurate records of test results, inspections, and service activities., • Prepare detailed reports to ensure client transparency and compliance. Qualifications • Associates or Bachelors degree in Electrical Engineering, Electrical Technology, or related field (or equivalent military/field experience)., • NETA Level III Certification (required); NETA Level IV preferred., • 57+ years of electrical testing and maintenance experience (480V750kV)., • Strong knowledge of switchgear, transformers, motors, PTs, CTs, and protective relays., • Proficiency in interpreting electrical drawings, schematics, and wiring diagrams., • Proven leadership skills with ability to mentor junior staff., • Excellent communication and report-writing skills., • Physical ability to climb ladders, work in field conditions, stand for long periods, and lift up to 70 lbs., • Valid drivers license with clean record., • Ability to pass pre-employment drug screen, background check, and physical/respiratory fit test., • Flexibility to work overtime when required. Compensation & Benefits • Competitive salary based on experience., • Medical and dental insurance., • 401(k) retirement plan., • Paid vacation, sick leave, and holidays., • Participation in Employee Stock Ownership Plan (ESOP)., • Career development, training, and growth opportunities. Pre-Employment Screening All candidates must pass a background check, drug screen, and may be required to complete a physical/respiratory fit test prior to employment. Jennifer Sampson Technical Recruiter ....................................................... DONATO TECHNOLOGIES, INC 12100 Ford Rd, #306, Dallas, TX 75234 Direct : (469)-342-0401 Email: Web:

Job Description Position Description: Seeking a motivated, intelligent and hard-working individual to Develop and maintain quality and regulatory compliance in Genadynes' processes. Individual will ensure compliance with ISO 13485 and MDSAP requirements are maintained. Specific Responsibilities : Ensure the quality and processes are practiced and maintained. Compile documents required for audits. Create and maintain product technical files. Initiate corrective and preventive actions for non-conformities. Maintain/calibrate the accuracy of all testing equipment. Conduct risk assessments of medical devices and processes. Maintaining the effectiveness of quality control system and non-conforming materials control system. Discuss and solve quality problems with vendors. Investigate problems and make improvement on current processes. Develop/design effective test methods. Facilitate software design and development for medical devices. Performance testing and reporting on software, hardware and the compatibility for all accessories. Perform risk assessments for medical devices and accessories. Development and prototyping of new products with existing or new vendors. Abilities: Familiar with FDA CFR 820, ISO 134850, SOPs regulations. Extreme attention to details. Ability to think outside the box with excellent problem solving abilities. Excellent interpersonal, communication, and writing skills. Highly organized. Excellent computational skills. Knowledge of European regulations is a plus. Knowledge of common medical materials (silicone, polyurethane, etc.) Knowledge of electrical circuits and basic programming. Knowledge of C/C++ is a plus. Maintain MDD/MDR EN ISO Experiences: Regulatory compliance. Quality management. Cross functional team management. Quality assurance Requirements: Bachelor degree in mechanical, electrical, material, biomedical engineering or relative field. (Master degree preferred.) Benefits: Medical, Dental, Vision, PTO, 401K, Legal Services, FSA, Life Insurance Salary Range: $68,000 - $72,000/Annual Powered by JazzHR oSPuR7OKHc

Job Description Job Title: Field Inspector Company: de Bruin Engineering, PC Location: 1400 Old Country Road, Suite 106, Westbury, NY 11590 Job Type: Full-time About Us: de Bruin Engineering is a leading construction management and civil engineering consulting firm specializing in delivering innovative design and project management solutions for public and private sector clients. We are currently seeking a dedicated and technically capable Field Inspector to join our growing construction management team. This role plays an essential part in ensuring the successful execution of infrastructure projects through on-site inspection, documentation, and quality assurance, with a focus on wastewater treatment plant and related utility infrastructure projects. Job Summary: The Field Inspector will oversee daily on-site construction activities, provide field monitoring and documentation, and support the project team in maintaining compliance with project specifications, safety protocols, and regulatory requirements. The Field Inspector will also perform routine inspections, track field conditions, assist with contractor coordination, and contribute to quality assurance efforts across all phases of construction. The ideal candidate will possess significant experience working on wastewater treatment plant rehabilitation, upgrade, and utility infrastructure projects, including work performed in active treatment facilities with minimal disruption to ongoing operations. Clear communication, strong attention to detail, and effective collaboration with contractors, inspectors, engineers, and operations staff are critical. Key Responsibilities: · Monitor and inspect construction activities to verify contractor compliance with contract documents, and applicable codes and standards. · Prepare daily reports, photographs, field measurements, and material logs. · Identify field issues or discrepancies, communicate observations to the project team, and assist in coordinating timely resolution. · Support coordination by tracking progress and providing field-based feedback to project managers and resident engineers. · Maintain organized and accurate project documentation using digital project management and document control systems. · Coordinate with contractors, third-party inspectors, regulatory agencies, and facility/operations staff to support QA/QC activities and minimize impacts to ongoing plant operations. · Inspect mechanical, electrical, piping, structural, and civil construction activities associated with wastewater treatment facilities, pump stations, force mains, and related infrastructure improvements. · Monitor contractor compliance with environmental, safety, and operational requirements associated with active wastewater treatment facilities. · Assist with project closeout activities, including punch list development, verification of completed work, and collection of as-builts, warranties, and other closeout materials. Requirements: · Minimum of 10 years of construction inspection experience on wastewater treatment plant, water treatment plant, utility, and/or heavy civil infrastructure projects. · Strong familiarity with construction methods, equipment, materials, and inspection standards used in wastewater treatment and municipal infrastructure projects. · Experience working within active wastewater treatment facilities and coordinating construction activities around ongoing plant operations. · Ability to read and interpret construction drawings, specifications, and related documents. · Strong written and verbal communication skills. · Proficiency in Microsoft Office and ability to learn project management software. · Valid driver’s license and ability to travel to various project sites as required. Preferred Qualifications: · OSHA 10-Hour or 30-Hour certification. · Experience with municipal, state, or public agency infrastructure construction projects. · Bachelor’s degree in Construction Management, Civil Engineering, or related field; technical or construction-related training preferred. · Experience with Nassau or Suffolk County Wastewater Treatment work. Why Join Us? · Work on high-profile, technically challenging public infrastructure projects. · Join a collaborative, experienced, and mission-driven team. · Competitive salary and comprehensive benefits package. · Opportunities for training, professional certifications, and career advancement. How to Apply: Please submit your resume and cover letter with "Field Inspector Application" in the subject line

Job DescriptionSalary: 90,000-120,000 NKSFB, LLCis the largest business management firm in the country, with more than 650 employees working from seven offices in the Los Angeles and New York City area. We work alongside the worlds top artists in music, film, and television, as well as athletes, executives, entrepreneurs, and other high achievers, offering a sophisticated range of concierge-style services to meet their lifestyle management needs. Job Title:Senior Tax Accountant Reports To:Tax Manager FLSA Status:Exempt Department:Tax Your Role:The Tax team in Garden City is hiring a Senior Tax Preparer to join our dynamic group of tax professionals.This selected candidate is influential in the process of preparing tax returns and assisting clients with various tax matters. The Senior Tax Preparer gathers and reviews client tax documents to prepare necessary individual, partnership, estate, corporate, and/or trust tax returns. The ideal candidate has a solid understanding of common tax rules, tax compliance, and tax regulations. This person is also knowledgeable in tax accounting principles. You are a confident and professional communicator, with exceptional time management and organizational skills. The selected candidate will be expected to perform the following duties: What will you do? • Preparation of federal and multi-state income tax returns., • Partner closely with high-net-worth individuals, large family groups, and family offices to handle tax work papers for their businesses, investments and estate planning entities., • Prepare tax accounting adjustments and financial statements for individuals, corporations, partnerships, trusts, and estates., • Prepare personal, corporate, partnership, and estate/trust tax returnsof varying complexity., • Prepare payroll tax returns for state and federal reporting., • Understand client tax issues and situations and assist with tax research., • Identify and recommend tax strategies that better position a clients understanding of tax law., • Correspondence with tax authorities, and/or IRS inquiries. Draft responses to governmental queries, notes, or mandates., • Assistother team members with accounting responsibilities, as necessary., • Uphold the firm's code of ethics and business conduct. What Do you Need to Succeed: • Competency in Microsoft applications including Word,Excel and Outlook., • Self-motivated with excellentorganization skills., • Strong verbal and written communication skillsa must., • Attention to detail and ability to multi-task is amust., • Strong organizational and problem-solving skills., • Exceptional interpersonal skills., • Friendly and professional demeanor., • Ability to work well with a team and pitch in when needed. Education and Experience Requirements: • High School diplomarequired., • Bachelor's degreein Accounting, Finance, or related field from an accredited institution preferred., • 2+ years of experience working within a corporate tax department is preferred., • 2+ years of experience preparing complex tax packages., • Experience working with tax preparation software such as BNA and CCH Axcess., • Licensed CPA or Enrolled Agent preferred. Physical Demands and Work Environment: • Standing, walking, crouching, and regular lifting up to 15 pounds., • Frequent use of hands and reaching with hands and arms., • Regularly talking, hearing, seeing, and sitting., • Moderate to loud noise level., • Risk of electrical shock. Salary Range: The salary range for this role is $90,000 - $120,000 and represents the firms good faith and reasonable estimate of the range of possible compensation at the time of posting. Actual compensation will be dependent upon a number of factors, including but not limited to, the candidates relevant experience, qualifications, and location. What We Offer:NKSFB offersa great variety of benefits and perks to our employees. Some of these include: • Medical, Dental and Vision coverage, • Flexible Spending Account, • Basic Life and AD&D, • Voluntary Life and AD&D, • Long Term Disability, • Voluntary Critical Illness and Cancer, Hospital Indemnity and Accident Coverage, • Genetic Screening and Cancer Support, • Pet Insurance, • Accrue 15 PTO days annually, • 401k, Match andProfit Sharing Plan, • 10 Paid Holidays and 1 Floating Holiday The job duties listed are typical examples of work performed by positions in this job classifications and are not designed to contain or be interpreted as a comprehensive inventory of all duties, tasks and responsibilities. Employees may also perform other duties as assigned. NKSFB, LLCis an Equal Opportunity Employer and is committed to diversity and inclusion. If youre a qualified candidate with a disability and you need a reasonable accommodation in order to apply for this position, please contact us . We collect your personal information when you apply for employment at NKSFB, LLC. To learn more about our data privacy practices, please view ourEmployee Privacy Policy. #ZR

Job DescriptionElectrical Engineer – Autonomous Weapons & Drone Systems Onsite | Great Neck, NY Full-Time | U.S. Citizenship or ITAR Eligibility Required Be part of a mission-driven team redefining autonomous defense. Wild West Systems builds next-generation drones and munitions for America and her allies - fast, affordable, and superior by design. As an Electrical Engineer, you'll help design, prototype, and deploy electronics for autonomous systems that change how the battlefield operates. ???????? About Wild West Systems Wild West Systems is a defense technology startup breaking conventions in autonomous edge defense through modular, AI-powered weapon platforms - designed, built, and launched in the USA. We arm the future warfighter with precision, affordability, and swagger. If you thrive on speed, grit, and purpose - welcome to the frontier. Why This Role Matters As an Electrical Engineer at Wild West Systems, you'll design the electronic backbone of our drone and munitions platforms - taking concepts from whiteboard to field-ready systems. You'll work directly with seasoned engineers across hardware, software, and mechanics to bring ideas into reality. You'll be part of a small, fast team where every design, every wire, and every test matters. What You'll Do • Electrical Design: Develop electronic systems from schematic to PCB layout and production release (Altium preferred)., • Prototype & Test: Support bring-up and validation of boards, including signal integrity checks, power testing, and troubleshooting., • Power Systems: Design and manage battery management, voltage regulation, and power distribution systems., • Integration: Collaborate with mechanical, propulsion, and firmware teams to ensure seamless system function., • Documentation: Produce detailed schematics, BOMs, and test procedures for builds., • Continuous Improvement: Participate in design reviews, trade studies, and field tests to refine performance and reliability., • B.S. in Electrical or Electronics Engineering (or related field), • 2–4 years of hands-on experience designing and testing electronic hardware, • Experience with PCB design tools (Altium strongly preferred), • Solid foundation in analog/digital circuits, grounding, and power integrity, • Comfortable with lab tools - oscilloscopes, logic analyzers, soldering equipment, • Familiar with embedded hardware (MCUs, sensors, CAN/SPI/I²C/UART comms), • Thrives in high-speed, hands-on, high-ownership environments, • Experience in defense, aerospace, or robotics hardware design, • Knowledge of military standards (MIL-STD-461, MIL-STD-810), • Exposure to motor drives, ignition systems, RF, or wireless links, • Familiarity with DFM/DFA and rugged design principles, • IPC-related experience (IPC-A-600, CID/CID+), • Experience with field testing or manufacturing support Why You'll Love It Here, • Mission That Matters: Build systems protecting America and her allies., • True Ownership: Small team, direct impact, zero bureaucracy., • Elite Benefits:, • 100% coverage for employee health, dental, and vision, • 90% coverage for spouse/family, • Culture of Action: Fast decisions, real results, no wasted time.Additional Info, • Onsite position based in Great Neck, NY, • Must meet ITAR requirements, • Uses E-Verify for work authorization, • No staffing agencies - direct applicants only

Job Description Efficient Energy Compliance is looking for several qualified professionals dedicated to combating climate change by decarbonizing buildings and providing resilient solutions for new building systems. As a crucial part of our expanding team, this role will be contributing to EEC’s services of commissioning, retro-commissioning, energy auditing, and resiliency retrofits in the NYC area. We are seeking qualified individuals who will demonstrate the ability to complete the following tasks with the technical and interpersonal skills outlined below: We are seeking a Commissioning Engineer with a strong background in energy efficiency and building systems to join our team. The ideal candidate will be responsible for overseeing the commissioning process of energy-efficient systems and technologies in both new construc Responsibilities • Lead and manage the commissioning process from kickoff through closeout, keeping projects organized, on schedule, and moving forward, • Coordinate closely with ownership, design teams, contractors, and vendors to align scope, resolve issues, and maintain progress, • Conduct site inspections to verify system installations align with design intent, specifications, and energy efficiency goals, • Review submittals and shop drawings to confirm systems are being installed in accordance with project requirements, • Oversee and witness equipment startup, pre-functional checklists, and functional performance testing across all systems, • Perform system testing, diagnostics, and troubleshooting to verify proper operation and identify issues early, • Execute point-to-point verification and sequence of operations testing for HVAC, electrical, lighting controls, and BAS systems, • Maintain commissioning schedules, issue logs, and documentation, actively tracking deficiencies through resolution, • Work directly with GC and MEP trades during construction to support system readiness, coordination, and turnover, • Analyze BAS trends and system performance data to identify inefficiencies and optimize building operations, • Monitor and validate energy performance during commissioning, providing practical recommendations for improvement, • Ensure all commissioning activities align with applicable codes and standards, including NYC Energy Conservation Code (NYCECC), LEED, and ASHRAE guidelines, • Support multiple projects simultaneously while maintaining strong communication, organization, and attention to detail, • Prepare and contribute to preliminary and final commissioning reports, including all testing documentation and system verification, • Coordinate building turnover by supporting O&M documentation, as-builts, and training for facility teams, • Participate in seasonal testing and warranty phase reviews, helping identify and resolve post-occupancy issues Bachelor’s degree in Mechanical Engineering, Electrical Engineering, Energy Management, or a related field. * 5+ years of experience in building systems commissioning, with a focus on energy efficiency and sustainable building practices. * Strong knowledge of energy-efficient technologies, building systems (HVAC, lighting, controls), and renewable energy systems. * Familiarity with commissioning processes for energy-efficient systems, including building automation, HVAC, and lighting systems. * In-depth understanding of energy codes, standards, and certifications (e.g., NYC Energy Conservation Code, LEED, ASHRAE, Title 24). * Experience with energy modeling and system analysis software (e.g., Trane Trace, EnergyPlus, etc.). * Strong troubleshooting, diagnostic, and problem-solving skills. * Excellent communication skills, with the ability to collaborate effectively with project teams, clients, and contractors. * Ability to manage multiple projects and timelines, ensuring completion within scope, budget, and schedule. Preferred Skills: * Certification as a Commissioning Professional (CxA) or LEED Accredited Professional (LEED AP). * Knowledge of New York City’s energy codes and regulatory environment. Ideal Candidate Will Have • Excellent work ethic, • Strong verbal and written communication skills, • Excellent communication and presenter skills, • Attention to detail, • Strong time-management skills, • Strong organizational skills We offer a competitive salary and good benefits package, including healthcare benefits and paid time off. 401K and Aflac & Flexible spending account. Interested candidates, please forward resume with salary requirements. Salary depending on experience. Efficient Energy Compliance LLC is proud to be an equal opportunity employer.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Competitive salary, • Dental insurance, • Health insurance Job Description: Kallidus Technologies, Inc. is looking to fill-in a position for a Field Project Engineer with strong emphasis on coordinating MEP work in commercial and industrial buildings. The position will be responsible for performing a variety of duties, including the following: Field Project Engineer Required Qualifications: * * • 7+ years of Proven MEP construction experience, • 5+ years of being a Safety and QAQC knowledge, • 5+ years of Electrical trade specific knowledge, • 5+ years experience managing schedules and subcontractors, and coordinating with architectural trades, • 5+ years experience working with contracts and exhibits, • 5+ years experience with detailed planning and demonstrated ability to understand plans and specsQualifications: Qualified individual will have successfully executed minimum 5 projects in the range of $5 million to $20 million Must have Enigneering degree with 5+ years experience & OSHA 30 Hr Training Must be able to read Blue Print & Specifications Must have Industrial or Federal or Public work experience CAD proficiency must Computer Skills: email, Microsoft word, excel, RFI Excellent verbal and written communication skills All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, or national origin.

Job Description Hazen and Sawyer is seeking a Construction Inspector to support the construction of water and wastewater treatment facilities and infrastructure located in the greater NYC Metro area and Springfield, MA. The selected candidate will inform the CM team by observing and reporting on construction activities, effectively coordinating and collaborating with the project team members, and providing documentation and inspection activities for various water and wastewater facilities and infrastructure. Responsibilities include: • Review and interpret project drawings, specifications and work plans to verify contractor compliance;, • Conduct on-site observation, monitoring, inspection, and evaluation of construction activities;, • Verify and track work in accordance with approved shop drawing submittals;, • Observe contractor performance and compliance with safety requirements;, • Prepare daily reports, verify material quantities, Time and Material (T&M) records and review contractor pay applications;, • Monitor construction contractor’s adherence to project schedule and sequence of activities related to daily field observations;, • Maintain project redline and as-built drawings;, • Coordinate and communicate effectively with the CM Project team, multi-discipline engineering teams, contractors and third-party inspection/testing firms;, • Assist and coordinate with project start-up, testing checkout and training activities;, • Minimum 5 years of construction / construction observation experience;, • Familiarity with construction methods typical of civil, structural, mechanical and/or electrical engineering work;, • Excellent verbal, written, and interpersonal skills, organizational and problem-solving skills;, • Experience working on and collaborating with multidisciplinary teams, • Willing to travel and stay local to projects in the NYC Metro area as needed., • Proficiency with Microsoft Office Suite, Microsoft Project and related PC software packages used on construction projects, • Experience in municipal water and wastewater or similar industry construction inspection preferred

Job DescriptionFST Technical Services Commissioning (Cx) division is one of the leading Cx firms in the country. We partner with clients for quality assurance in the design, construction, and post-acceptance phases of building projects. We ensure that equipment in mechanical, electrical, plumbing, and associated systems are designed, installed, and functionally tested to meet the clients requirements and design intent. We have extensive experience working on healthcare facility projects, ensuring that critical systems operate reliably and efficiently to support patient care and safety. For this position of Commissioning Field Engineer II on offer includes an excellent salary and benefits package. About the Job: A Field Engineer II reports directly to his or her Team Leader and to the team’s Project Engineers, and is directly responsible for the execution of field and office assignments as directed. Essential Functions Field Engineer must have general knowledge of the following topics: Refrigeration, HVAC, Steam management and distribution systems, pumps, fans, motors, chillers, boilers, air ventilation balancing systems, BMS systems and VAV. Field Engineer holds the following responsibilities: • Site Inspections and reports., • Equipment Testing., • Submittal Review and preparation of comments, • Document and Specification reviews and updates, • Create and execute commissioning checklists for the respective equipment and systems as directed by the team leader, • Collection and tabulation of field data using FST testing equipment, • Preparation and writing of reports., • Proper use of FST test equipment including maintenance, cleaning and reporting damages to their respective Team Leader, • Assist in executing performance test requirements., • Individual Time and Expense management., • Any special projects as requiredRequirements: • Bachelor’s Degree in Mechanical/ Electrical Engineering, minimum 1-3 years of experience., • Must be a self-starter and capable of working independently or in a team environment., • Must possess a strong desire to learn and participate in the company developmental training program, • Trade Professional affiliation, a plus., • Proficiency with Microsoft products (Word, Excel, Power Point, etc.)Technical writing skills a plus, • Strong ability to work in changing environment and adapt to varying working environments., • Must be able to lift at least 30 pounds and climbing ladders Pay range $75k-$90k based on experience. FST Technical does not offer employment-based visa sponsorship for this position. Applicants must be legally authorized to work in the United States without the need for employer sponsorship now or in the future. Powered by JazzHR Kbs1DJDIMm

Job DescriptionHello A&O Safety Pros, Job Title: Field Safety Manager Transmission Line Construction Location: Northern Minnesota Hours: 50-60 Hours per Week Per Diem: $215 / day (7 days) Vehicle and Fuel Card Provided Start Date: Immediate Duration: 12-15 month contract with potential for extension Job Overview: Alpha & Omega Safety Services is seeking a Safety Manager for a long term Transmission Construction Project in Minnesota. This role is crucial for ensuring compliance with safety regulations, implementing safety programs, and maintaining a safe work environment on-site. Qualifications: Experience in Transmission and Distribution safety Minimum OSHA 510 Strong knowledge of OSHA regulations and safety compliance in construction Ability to lead safety meetings, conduct site inspections, and enforce safety policies Benefits & Compensation: Per Diem: $215 / day (7 days) Vehicle Allowance: Truck and Fuel Card Provided Contract Duration: 12-15 months with the potential for extension Overtime Pay: Time and a half after 40 hours

Job DescriptionPosition Description: We are looking for an experienced Lead HVAC Technician to serve as our team's primary technical expert. In this role, you will handle advanced diagnostics and Service while providing guidance to junior technicians. This is a leadership-focused position ideal for a high-level field professional ready to move into a supervisory or senior-tier role. Key Responsibilities Technical Leadership: Diagnose, troubleshoot, and repair complex light commercial, Commercial and VRF HVAC systems, including hydronic, Water Cooled, and VRF systems. Team Mentorship: Supervise and train junior technicians and helpers on-site, ensuring work meets high standards of professionalism and safety. Customer Experience: Communicate clearly with clients, explaining technical issues and providing repair vs. replacement options. Operational Excellence: Maintain an organized company truck, manage inventory for critical spare parts, and ensure compliance with OSHA and EPA regulations. Required Qualifications Experience: Minimum 5+ years of hands-on HVAC service technician. Leadership: At least 2 years of experience in a crew lead or supervisory capacity. Certifications: Valid EPA Universal Certification (required) and state-level HVAC license. Knowledge: Advanced understanding of electrical, gas, refrigeration systems, and local building codes. Driving: Valid drivers license with a clean driving record. Preferred Qualifications Experience with Building Automation Systems (BAS) or smart home controls. NATE Certification or specialized boiler/hydronics training. Compensation & Benefits Pay: $35.00 $45.00 per hour (based on experience), plus performance-based bonuses. Tools & Equipment: Company-provided take-home truck, fuel card, high-end tools, and uniforms. 638 Union Package: Comprehensive health, dental, and vision insurance. Time Off: Paid vacation, sick leave, and holidays. $35.00 - $45.00 Hourly

Job Description Position Title: BMET I- East Meadow, NY Salary: $28.00- $30,00/hr Other Forms of Compensation: Join Intelas, a Compass Healthcare company. Intelas, a Compass Healthcare company, delivers smarter asset management by blending expert service teams with intelligent, data-driven strategies that help hospitals improve uptime, simplify oversight, and make more informed capital decisions. Our programs support 100% regulatory compliance and drives 98% equipment uptime—so clinicians can focus on care, not equipment issues. We support nearly 4,500 healthcare sites nationwide—from large, campus-based acute care hospitals to system-integrated outpatient clinics. With more than 1.15 million medical devices managed, we provide the clarity and consistency needed in today’s rapidly evolving healthcare environment. Join Intelas—where your career thrives, your potential is unleashed, and your work directly supports patient care. Whether you're just starting out or are a seasoned professional, our people-first approach ensures opportunities for continuous growth, development, and fulfillment. Explore more at intelashealth.com. Job Summary Key Responsibilities: • Performs planned maintenance and electrical safety inspections on a broad range of patient care and selected support equipment in compliance with established standards., • Manages all assigned equipment and schedules service., • Performs pre-acceptance inspections and develop PM procedures on equipment; maintains files on procedures and manuals., • Ensures test equipment is working properly and calibrated within established intervals., • Responds expeditiously to calls from clinical departments to evaluate and rectify valid operator complaints and concerns., • Researches and initiates orders for repair parts, working within established budget parameters., • Maintains purchase order log and validate invoices for payment (field service personnel only)., • Provides informal training to equipment users and Crothall Services Group staff as requested or when circumstances dictate., • Makes recommendations to the Department Manager regarding service strategies on equipment; keeps supervisor informed of activities, needs and problems., • Participates in the Quality Improvement / Risk Management program by gaining an understanding of the issues and concerns of customers and making recommendations for improvement., • Maintains an orderly and functional work environment., • Provides emergency on-call responsibilities as needed., • Documents all significant asset related actions in compliance with department practices., • Participates in department meetings., • Collaborates with fellow technical personnel in department meetings to ensure they are kept abreast of technical updates and/or device related problems. Preferred Qualifications: • Associates degree in electronics/biomedical equipment technology, military training or equivalent experience, • 1-3 years servicing clinical/patient care equipment in a hospital environment, • For field service positions requiring travel, valid driver’s license is required, • Ability to work independently with some supervision, • Good communication and strong customer service skills, • Good organization and time management skills, • Working knowledge of computer applications pertaining to tracking service histories and producing reports on assets, • Good trouble-shooting skills, • Ability and willingness to serve "on-call" duty as required, • Strong work ethic and ability to work as a member of a team Apply to Intelas today! Intelas is a member of Compass Group USA Click here to Learn More about the Compass Story Associates at Intelas are offered many fantastic benefits. • Medical, • Dental, • Vision, • Life Insurance/ AD, • Disability Insurance, • Retirement Plan, • Flexible Time Off, • Holiday Time Off (varies by site/state), • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs), • Paid Parental Leave, • Personal Leave Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here for paid time off benefits information. Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. We encourage applicants with a criminal history (and driving history) to apply. Certain positions may require Florida Level 2 background screening. Details: Applications are accepted on an ongoing basis. Intelas maintains a drug-free workplace. Req ID: 1531923 Intelas ASHLEY VAVROCK [[req_classification]]

Job Description Sr. BIM Electrical Engineer Queens County, NY $130K–$180K + Possible Relocation Assistance Why this role stands out: • Lead BIM-driven electrical engineering projects across commercial, industrial, institutional, and mission-critical facilities, • High-impact leadership role blending electrical engineering, BIM coordination, and construction execution, • Opportunity to mentor engineers and BIM technicians while shaping internal engineering standards, • Exposure to large-scale design-build and electrical construction projects, • Lead electrical engineering design and BIM coordination throughout the full project lifecycle, • Build and maintain advanced Revit models for power systems, lighting, telecom, grounding, and fire alarm systems, • Perform electrical calculations including arc flash, voltage drop, fault current, and load analysis, • Coordinate closely with architectural, structural, and MEP teams using BIM workflows, • Support RFIs, submittals, budgeting, scheduling, and technical troubleshooting during construction, • Conduct site inspections and ensure field installations align with engineered designs, • Lead BIM coordination meetings, clash detection reviews, and technical walkthroughs, • Bachelor’s degree in Electrical Engineering or related field, • 6+ years of electrical engineering experience within construction or design-build environments, • Advanced Revit proficiency for electrical systems modeling and BIM coordination, • Strong knowledge of NEC, NFPA, and local electrical codes, • Experience with electrical calculations, technical drawings, and multidisciplinary coordination, • Familiarity with AutoCAD, Navisworks, Revizto, Bluebeam, BIM 360/ACC, or Procore preferred, • NYC project experience strongly preferred, • Leadership experience managing teams or mentoring technical staff

Job DescriptionSenior Electrical Engineer - NYC - Engineering firms, MEP Contractors and Service-based industrial companies Overview We are currently supporting clients seeking Senior Electrical Engineers to support complex infrastructure projects across the NYC and Long Island market. This role focuses on leading the design and delivery of electrical systems for large-scale, multidisciplinary projects. The ideal candidate brings deep technical expertise, strong leadership capabilities, and experience working with public agencies and infrastructure clients. Key Responsibilities Technical Leadership & Design • Lead the design and specification of electrical systems for complex infrastructure projects, including:, • Medium and low voltage power distribution, • Lighting and control systems, • Traction power and substations (rail/transit), • Communications, SCADA, and control systems, • Fire life safety and emergency power systems, • ITS, signal power, and roadway electrical systems, • Prepare and review design drawings, calculations, reports, and technical specifications, • Perform system studies including load flow, short circuit, grounding, and protection coordination, • Ensure all designs meet applicable codes, standards, and agency requirements, • Evaluate and implement innovative and sustainable electrical design solutionsProject Leadership & Coordination, • Serve as discipline lead for electrical scope on complex, multi-disciplinary infrastructure projects, • Coordinate closely with civil, structural, mechanical, and systems engineering teams, • Support project planning including schedules, budgets, staffing, and risk mitigation, • Participate in design reviews, constructability reviews, and value engineering efforts, • Maintain high-quality control standards across all deliverablesClient & Stakeholder Engagement, • Interface with public agencies, utilities, contractors, and project stakeholders, • Present technical solutions and design concepts to both technical and non-technical audiences, • Support proposal development, including scope definition, fee development, and technical narrativesMentorship & Team Development, • Mentor and guide junior and mid-level engineers, • Perform technical reviews and provide feedback to ensure quality and consistency, • Contribute to internal standards, best practices, and continuous improvement initiativesTechnical Skills, • Power distribution and substation design (MV/LV systems), • Traction power and rail system electrical infrastructure, • Electrical system analysis (load flow, fault analysis, protection coordination), • SCADA, communications, and control systems, • Fire life safety and emergency power design, • Strong knowledge of industry codes and standards (NEC, NFPA, IEEE, AASHTO, etc.)Core Competencies, • Strong leadership and project ownership capabilities, • Excellent problem-solving and analytical skills, • Ability to manage multiple large-scale projects simultaneously, • Strong communication skills across technical teams and stakeholders, • Detail-oriented with a focus on safety, quality, and complianceQualifications, • Bachelor's degree in Electrical Engineering (required), • Professional Engineer (PE) license (required), • 15+ years of progressive experience in electrical engineering within transportation or infrastructure projects, • Demonstrated experience supporting large, complex projects such as:, • Transit and rail systems, • Highways, bridges, and tunnels, • Airports or major public infrastructureAdditional Details, • Hybrid office/field environment supporting major infrastructure projects, • Opportunity to work on high-impact public sector initiatives, • Competitive compensation and leadership growth opportunityIn accordance with New York salary transparency requirements, the anticipated annual base salary range for positions is: $175k-$225k annually. Actual compensation will be based on experience, qualifications, and demonstrated project leadership background. Search managed by: Danielle Morris - danielle.morris@ LHH.com Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply Pay Details: $175,000.00 to $225,000.00 per year Search managed by: Danielle Morris Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Ready to grow your career with a company building the future of heating and cooling? At Elm Air, we deliver high-quality residential HVAC solutions, leading the shift toward sustainable, high-efficiency systems that serve customers and the climate. If you want steady, year-round HVAC work with 40 hours guaranteed and no winter layoffs, this is where your skills turn into long-term stability. What’s in It for You? * Hourly pay between $20 and $65 per hour based on experience and demonstrated capabilities * Commission opportunities for enrolling customers in Elm Air Membership Plans * Guaranteed 40 hours per week * No winter layoffs with consistent year-round work * Health, dental, and vision insurance available on day one * 401(k) available after 90 days of service * Company vehicle for field service work * Opportunity to expand your skills in installation, diagnostics, and repair * Full-time, stable employment with growth potential Why You’ll Love It Here * Leadership that values technicians and supports your development * A team-driven culture focused on professionalism and customer satisfaction * Diverse work across residential and light commercial properties throughout Long Island * Clear expectations, steady workflow, and strong operational support * The opportunity to sharpen your expertise in ducted and ductless systems, boilers, plumbing connections, and high-efficiency HVAC equipment * A company committed to maintaining high standards of comfort, safety, and service Your New Role As an HVAC Service Technician with Elm Air Conditioning LLC serving Long Island, you will: * Install, maintain, diagnose, and repair HVAC systems, including central air conditioning units, heat pumps, ductless mini splits, water heaters, and boilers * Perform HVAC service calls, troubleshooting, and system repairs across residential and commercial properties * Install ductwork, piping, and related HVAC components * Read and interpret schematics, HVAC design plans, wiring diagrams, and technical manuals * Perform preventative maintenance inspections to ensure system efficiency and safety * Troubleshoot electrical components using meters and diagnostic tools * Complete plumbing connections related to HVAC systems, including pipe fittings and drainage * Operate a company vehicle safely while transporting equipment and materials * Document service activities accurately and communicate clearly with customers about repairs and system recommendations * Maintain a professional job site and represent the company with integrity Hiring Expectations: Apply today, complete a quick phone screening, and get ready for an interview with our team to discuss your goals and experience. * Experience as an HVAC service technician or in a related mechanical field * Strong mechanical knowledge, including boilers and general HVAC system repair * Ability to troubleshoot electrical, mechanical, and system performance issues * Familiarity with HVAC schematics and design principles * Experience with plumbing, brazing, and boiler operation is preferred * A construction, trades, or property maintenance background is a plus * Valid driver’s license with a clean driving record * Strong communication skills and ability to manage multiple priorities * High school diploma or GED equivalency * Authorized to work in the United States Elm Air Conditioning LLC is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment regardless of race, color, religion, gender, gender identity, sexual orientation, national origin, genetics, disability, age, or veteran status. #yellow

At Elecnor Hawkeye, we prioritize our employees by fostering a collaborative, dynamic environment that enables them to reach their full potential. As a leading company in engineering, construction, and infrastructure, we provide solutions for electrical transmission, substations, gas pipelines, and solar facilities. Our goal is to build essential energy infrastructure while supporting the transition to cleaner energy sources. We have established a strong reputation for delivering affordable and safe services, and we remain committed to ensuring customer satisfaction, protecting the environment, and completing projects on time and within budget. We consistently seek ways to enhance our operations, support ongoing growth, and expand our services across the Northeastern and Mid-Atlantic regions and beyond. The Executive Assistant at Elecnor USA plays a crucial role in supporting the organization's leadership by providing high-level support to the Executive Department in a dynamic, rapidly growing environment. This position serves as a trusted partner, necessitating sound judgment, the ability to anticipate needs beyond standard administrative tasks, proactive execution, and a deep understanding of both operational details and executive priorities. The Executive Assistant will work closely with other executive assistants and corporate teams in Spain, requiring exceptional communication skills in both English and Spanish, as well as the ability to manage multiple time zones. This role also involves leveraging artificial intelligence (AI) tools to enhance efficiency by generating high-quality reports and preparing executive-level communications for quarterly board meetings, monthly leadership retreats, client events, and industry conferences. As the Executive Assistant, you must have a strong presence and the ability to maintain confidentiality while fostering positive relationships across all departments and with external vendors and contractors. Responsibilities • Oversee projects by managing priorities and following up on open items to ensure that all deadlines and requirements are met., • Track and follow up on action items, decisions, and deliverables across all meetings and events, • Ensure timely execution of approvals (contracts, requisitions), • Prepare comprehensive meeting materials, including presentations, reports, briefings, slide decks, financial summaries, agendas, and pre-reads, • Plan and execute quarterly board meetings, including venue selection, catering, board packet preparation, A/V setup, and post-meeting action item tracking., • Organize monthly leadership off-sites and closing meetings across finance and operations teams, managing all logistics such as venue booking, transportation, catering, agenda compilation, metrics reporting, and decision follow-up., • Coordinate all logistics for executive meetings, including venues, itineraries, catering, and audio/visual requirements., • Attend internal meetings to capture notes and track action items., • Collaborate with communications and marketing to coordinate corporate outings, industry conferences, and client relations events, including logistics, registrations, and booth materials., • Manage annual corporate golf outings from start to finish, including course selection, registrations, branded materials, tee time coordination, and sponsor communications., • Plan and execute client networking events, from venue research and invitation management to day-of logistics and post-event communications., • Support executive attendance at industry conferences and trade shows, handling registration, travel arrangements, booth logistics, client dinners, and expense reconciliation., • Reconcile and submit expense reports., • Input payroll for executives and direct reports, • Maintain corporate memberships, donations, and key records., • Manage vendor relationships and ensure timely communication with internal and external stakeholders., • Manage complex, frequently changing calendars and travel arrangements for executives and their direct reports., • Leverage AI tools and MS Office (especially Excel) to drive efficiency and optimize workflows, • Performs other duties as assigned Qualifications • A Bachelor's degree in Business Management, Communications, Administrative Management, or a related field is required., • A minimum of 7 years of experience supporting C-suite executives or equivalent executive-level administrative experience is required., • The ability to independently manage projects, handle complex calendars, and arrange detailed travel plans is essential., • Excellent skills in organizing materials for executive meetings to ensure timely follow-up on important action items and approvals are necessary., • Strong organizational skills and a detail-oriented, process-driven approach are critical., • A proactive problem-solver who can anticipate needs and make sound decisions in challenging situations is required., • Good communication skills are important, as interaction with senior leaders is necessary to manage expectations., • Diligent and approachable, with a proactive attitude toward engaging internal and external stakeholders, are vital., • Discretion and professionalism in handling confidential information are essential., • Advanced proficiency in Microsoft Office, particularly Excel, is required., • Knowledge of AI productivity tools to enhance efficiency and support strategic business goals is necessary., • The candidate should be assertive and resilient, able to thrive in high-pressure, fast-paced environments., • The capacity to manage multiple competing priorities with composure is essential., • Fluency in Spanish is preferred. Work Environment & Hazards • Standard office environment with minimal travel requirements., • This role is in-person and may involve occasional work beyond standard business hours to meet leadership needs. Special Physical Demands • Primarily sedentary role requiring prolonged periods of sitting at a desk and working on a computer., • May occasionally lift or move up to 15 pounds (e.g., event materials, supplies). Work Contact Group • Regular interaction with C-suite executives, all internal departments, external stakeholders, and Board members., • Requires high EQ, diplomacy, and strict confidentiality. Elecnor Hawkeye provides a comprehensive benefits package designed to ensure both your physical health and financial security, as well as that of your dependents. Some of the benefits we offer include robust health insurance options, retirement plans, and wellness programs designed to enhance your overall well-being. At Elecnor Hawkeye, we prioritize our employees' health and financial future while helping them achieve these important goals. Elecnor Hawkeye USA is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, national origin, ancestry, sex, sexual orientation, gender identity or expression, religion, age, pregnancy, disability, work-related injury, covered veteran status, political ideology, marital status, or any other factor that the law protects from employment discrimination.

Job DescriptionAt Power-Flo Technologies, you’ll be part of a team that designs and delivers complete switchgear solutions. We are looking for you to join our collaborative team as an Electrical Design Engineer. This is a full-time, on-site role. Primary Function: Responsible for design of electrical panels and schematics to meet customer requirements. Provide panel jobs quotes and estimates. Act as project management on panel jobs. Assist with customer technical support. Post-sales support on core products. Design Engineer Essential Responsibilities • Review engineered contract drawings and specifications for the design of electrical control panels, • Design and layout of electrical panels using AutoCAD Electrical, • Ensure that all panels are being designed and constructed to UL Standards, • Creating Bill of Materials for the sales engineer team, • Create testing procedures for specific projects to be used by shop personnel, • Determine parameters to program variable frequency drives and soft starters, • Provide technical support on the products we manufacture Design Engineer Necessary Qualifications • 3 years+ experience in the design of electrical systems required, • Ability to use AutoCAD for electrical design work., • Hold a degree in the engineering field., • Must have a valid and clean driver's license to travel to job sites and other branches as needed. Design Engineer Physical Requirements • Some Minor Lifting and Moving of Parts and Equipment Salary commensurate with experience in the design of electrical systems (Range from $70,000 - $145,000 annually) Benefits Package • Medical, Dental, Vision, • PTO Program and Paid Holidays, • 401K, • EAP, • ESOP (Employee Stock Ownership Plan) We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Senior Electrical Estimator Location: Queens, NY (Ozone Park) Schedule: Full-Time What’s in it for you: • High-impact role on complex, large-scale electrical construction projects, • Opportunity to influence preconstruction strategy and bid success, • Exposure to commercial, industrial, and institutional projects, • Leadership opportunity with mentorship responsibilities Responsibilities: • Lead preparation of comprehensive cost estimates for electrical construction projects, • Analyze drawings, specifications, and project documents to define scope and identify risks, • Perform detailed quantity takeoffs for power, lighting, low-voltage, and specialty systems, • Develop pricing models covering labor, materials, equipment, and subcontractor scope, • Solicit, review, and level vendor and subcontractor proposals, • Identify cost optimization and value engineering opportunities, • Evaluate risks and incorporate contingencies into estimates, • Prepare and present bid packages for internal and client review, • Collaborate with project managers, engineers, and clients during preconstruction, • Maintain estimating databases and historical cost records, • Support handoff to operations, ensuring clarity of scope and assumptions, • 5+ years of electrical estimating experience in a contracting environment, • Strong knowledge of electrical systems, codes, and construction practices, • Experience estimating large-scale or complex projects, • Proficiency with estimating software (e.g., Accubid, ConEst, or similar), • Ability to read and interpret construction drawings and specifications, • Experience with labor productivity, unit costs, and material pricing, • Strong analytical, organizational, and communication skills, • Bachelor’s degree in Electrical Engineering, Construction Management, or related field, • Experience in design-build or design-assist environments, • Familiarity with BIM and digital takeoff tools, • Experience with vendor and subcontractor negotiations, • Leadership or mentorship experience, • Background working with large general contractors (heavy civil experience a plus)

We're seeking a Mechanical Technician who's ready to put your skills to work on projects that matter - and build a career with a company that's building North America. Job Title: Mechanical Technician | Req ID: 16206 | HR Contact: Kara Elizabeth O'ROURKE| Location: Ravena Cement Plant NY COMPANY OVERVIEW \n Amrize is building North America. From bridges and railways to data centers, schools, offices and homes, our solutions are inside the buildings and infrastructure that connect people and advance how we live. And we invite you to come and build with us. \n As the partner of choice for professional builders, we offer advanced branded solutions from foundation to rooftop. Wherever our customers are, whatever their job, we're ready to deliver. Our 19,000 colleagues work across 1,000 sites supported by an unparalleled distribution network. Infrastructure, commercial and residential, new build, repair and refurbishment: We're in every construction market. \n Amrize listed on the New York Stock Exchange and the SIX Swiss Exchange on June 23, 2025, following our spinoff as an independent company. Join us and build your ambition. \n ABOUT THE ROLE \n To work as part of a team to ensure the continuous operation of the cement plant and associated facilities in order to maximize operational efficiency in an environment of continuous learning and improvement; to maintain, troubleshoot and repair plant equipment in accordance with plant needs within MSHA, and AMRIZE safety guidelines. \n WHAT YOU'LL ACCOMPLISH \n\n • Perform all work according to MSHA and plant health and safety procedures and policies, put safety first in everything you do.\n, • Perform mechanical maintenance work to ensure safe, continuous and efficient operations. Fabrication, assembly, welding, and cutting following safe and accepted maintenance practices to maintain high equipment reliability.\n, • Dismantles, repairs, and reassembles equipment using an array of mechanical tools and equipment, not limited to, but including, wrenches, pneumatic tools, cutting and welding equipment, an array of workshop equipment, rigging equipment, etc. \n, • May be asked to serve as a member of a Continuous Improvement Group to identify opportunities for improvement.\n, • Troubleshoot potential concerns required to achieve and maintain maximum productivity. \n, • Report maintenance problems to the appropriate supervisor and participate in the development of corrective and preventative maintenance plans.\n, • Perform preventive/proactive inspections and document findings as directed by the maintenance supervisor and continuous improvement groups.\n, • Exercise good housekeeping practices at all times.\n, • Safely operate mobile equipment as required.\n Additional Requirements: \n Successful candidates must adhere to all safety protocols and proper use of Amrize approved Personal Protection Equipment ("PPE"), including but not limited to respirators. Employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit test. PHYSICAL DEMANDS \n The Physical demands described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. \n\n • While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel. \n, • The employee frequently is required to stand; walk; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; talk or hear and taste or smell. \n, • The employee will frequently be required to walk on rocky, irregular surfaces that may be muddy and in reduced lighting conditions. \n, • The employee is occasionally required to sit. \n, • The employee must frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 100 pounds. \n, • While performing the duties of this job the employee is regularly exposed to moving mechanical parts. \n, • The employee is frequently exposed to high, precarious places; fumes or airborne particles; water related hazards; outside weather conditions; and extreme heat. \n, • The employee is occasionally exposed to wet and/or humid conditions, proximity to electrical equipment, and vibration. \n, • The noise level in the work environment is usually moderate but occasionally loud.\n Amrize is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. \n We thank all applicants for their interest; however, only those selected for an interview will be contacted. BUILDING INCLUSIVE WORKSPACES At Amrize, there is endless opportunity for you to play your part. Whether you're in a technical, managerial, or frontline role, you can shape a career that works for you. We're seeking builders, creative thinkers and innovators. Come put your expertise to work while developing the knowledge and skills to drive your career forward. With us you'll have the chance to build your ambition! Amrize North America Inc. takes pride in our hiring processes and our commitment that all qualified applicants will receive consideration for employment without regard to age, race, color, ethnicity, religion, creed, national origin, ancestry, gender, gender identity, gender expression, sex, sexual orientation, marital status, pregnancy, parental status, genetic information, citizenship, physical or mental disability, past, current, or prospective service in the uniformed services, or any other characteristic protected by applicable federal, state or local law. Amrize North America Inc, and its respective subsidiaries are Equal Opportunity Employers, deciding all employment on the basis of qualification, merit and business need. Amrize Canada Inc. is committed to the principles of employment equity and encourages the applications from women, visible minorities, and persons with disabilities. Amrize North America Inc. participates in E-Verify and will provide the federal government with your I-9 information to confirm that you are authorized to work in the United States. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request accommodation in order to apply for a position with us, please email . This email address should only be used for accommodations and not general inquiries or resume submittals. In Ontario, our organization/business is committed to fulfilling our requirements under the Accessibility for Ontarians with Disabilities Act. Under the Act, accommodations are available on request for candidates taking part in all aspects of the selection process. While we sincerely appreciate all applications, only candidates selected for an interview will be contacted. PROTECT YOURSELF FROM RECRUITMENT FRAUD The only way to apply for a position at Amrize is through our official Careers website. Be cautious of unsolicited offers or requests for information from other sources. Learn how to protect yourself from recruitment fraud here: Fraudulent Job Offers Policy

Job ID: 723910BR Date posted: Apr. 20, 2026 Description:WHAT WE'RE DOING At Lockheed Martin, we engineer innovative solutions to deliver resilient systems, products, and services across evolving cyber threats. As risks to our hardware, software, and supply chains continue to rise, our customers require advanced solutions to mitigate growing vulnerabilities and ensure our systems can operate in cyber contested environments. Strong resiliency-focused engineering is essential to protecting Rotary and Mission Systems (RMS) platform/weapon systems from increasingly sophisticated cyber threats. THE WORK Lockheed Martin RMS is seeking a Systems Engineer responsible for advancing the development of digital twin architectures for the U.S Navy's strategic navigation submarine programs. In this role you will collaborate with cross functional teams to create a scalable virtual replica that supports Agile development, early/advanced integration and testing, design validation, predictive maintenance, troubleshooting using lab and field data, performance optimization, and lifecycle management. You will define the overall digital twin architecture, including data ingestion pipelines, simulation models and engines, analytics layers, and visualization frameworks and then validate the functionality against lab and field data. You will produce detailed design documents and be expected to conduct training sessions and workshops for internal and external stakeholders. WHY JOIN US Your Health, Your Wealth, Your Life Joining Lockheed Martin means becoming part of a team that's making a significant impact in the field of engineering. When you choose to work with us, you'll enjoy: Our flexible schedules, competitive pay and comprehensive benefits enable you to live a healthy, fulfilling life at and outside of work. Basic Qualifications: • Bachelor's degree from an accredited college in a related discipline such as Electrical/Mechanical Engineering, Computer Science, Mathematics or Physics, • Applicable technical experience on digital twin or model based systems engineering (MBSE) projects., • Proficiency with simulation tools (e.g. Simulink) and scripting languages (Python, MATLAB, C++/C), • Teamwork: Ability to work collaboratively on an Agile team with both local and geographically distributed teammates including subcontractors, technical agents and customers, • Excellent demonstrated interpersonal and time management skillsets, • Advanced degree from an accredited college in a related discipline such as Electrical/Mechanical Engineering, Computer Science, Mathematics or Physics, • Experience with MBSE tools, • Knowledge of Python, Pytorch, ONNX, and general AI/ML tools and libraries, • Familiarity with coding in C and C++, • Proficient working within both Windows and Unix/Linux environment, • Basic understanding of time-domain (Kalman, Least-Squares, etc) and frequency-domain filtering (Low-Pass, High-Pass, Band-Pass, Notch, etc), • Familiarity with Position, Navigation, and Timing with and without GPS, • Familiarity with Inertial Navigation algorithms, • Familiarity with Estimation and Guidance algorithms The base range for this position in New York is $101,654 - $160,620. Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays. The wage range and benefits summary is a general guideline and is governed by the applicable collective bargaining agreement when extending an offer. Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics. The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration. At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility. If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications. Experience Level: Hourly/Non-Exempt Business Unit: RMS Relocation Available: Possible Career Area: Systems Engineering: Models and Simulations Type: Full-Time Shift: First

Join Amrize as a Quality Assurance Technician I CEM and help construct what's next. If you're ready to put your skills to work on projects that matter - and build a career with a company that's building North America - we want to hear from you! ABOUT THE ROLE To obtain and monitor, by chemical and physical tests, representative samples from Production Department of raw materials, feed, clinker and cement, and advise them of adjustments to insure a quality product with a minimum of variations. WHAT YOU'LL ACCOMPLISH \n\n • Train and direct material handlers on regular or specialized sampling or take samples when necessary.\n, • Analyze raw mix with X-ray, wet or physical analysis and instruct Raw Grind on change, and assist in solving any problems.\n, • Monitor clinker production with X-ray or wet analysis and insure quality clinker used in cement production.\n, • Monitor cement production with X-ray, wet or physical analyses and oversee adjustments to proportions, admixtures, fineness and air content, assist in solving any problems.\n, • Record accurately and timely, data for use by management and other departments.\n, • Perform complete ASTM chemical and physical test on daily composite samples to insure product meets strict plant standards.\n, • Perform periodic calibration and preventive maintenance checks on all equipment and maintain chemical solutions.\n, • Ensure by proper test that all cement leaving the plant meets specifications.\n, • Examine raw materials in regard to variations or potential use.\n, • Run proficiency samples against other labs.\n, • Apply and record first aid to injured employees and maintain first aid room\n, • Take inventories of gypsum and admixtures.\n, • Train new employees to understand cement specification and be quality conscious.\n, • Perform microscopic evaluation of cement and clinker.\n, • Run heat content on calorimeter.\n, • Explain procedures or results to non-lab personnel.\n, • Evaluate data and inform Production and Quality Control Supervisor when running outside of parameters.\n, • Participates in team meetings.\n, • Applies skills and performs work in other positions as assigned.\n, • Demonstrate a commitment to communicating, improving and adhering to health, safety and environmental policies in all work environments and areas. Promote a culture of safety and exhibit these behaviors. \n\n WHAT WE'RE LOOKING FOR \n Required Education: Associates/Technical Degree Additional Education Preferred: Bachelor's/Undergraduate Degree Field of Study Preferred: Engineering or chemistry Required Work Experience: At least one year experience in industrial laboratory situation Required Computer and Software Skills: General Computer proficiency Travel Requirements: Some local travel Additional Requirements: \n\n • While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel. The employee frequently is required to stand; walk; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; talk or hear. The employee will frequently be required to walk on rocky, irregular surfaces that may be muddy and in reduced lighting conditions. The employee is occasionally required to sit. The employee must frequently shovel for 3 minutes with an 8 lb. shovel, frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distant vision, color vision, peripheral vision, depth perception, and ability to adjust focus.\n, • While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to high, precarious places; fumes or airborne particles, confined space, outside weather conditions, low lighting, artificial lighting, and explosives. The employee is regularly exposed to wet and/or humid conditions, proximity to electrical equipment, and vibration. The noise level in the work environment is usually moderate and occasionally loud.\n, • Successful candidates must adhere to all safety protocols and proper use of Amrize approved Personal Protection Equipment ("PPE"), including but not limited to respirators. Employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit tests.\n\n WHAT WE OFFER \n\n • Competitive salary\n, • Retirement Savings: Choose from 401(k) pre-tax and/or Roth after-tax savings\n, • Employee Stock Purchase Plan\n, • Medical, Dental, Disability and Life Insurance\n, • Holistic Health & Well-being programs\n, • Health Savings Accounts (HSAs) & Flexible Spending Accounts (FSAs) for health and dependent care\n, • Vision and other Voluntary benefits and discounts\n, • Paid time off & paid holidays\n, • Paid Parental Leave (maternity & paternity)\n, • Educational Assistance Program\n, • Dress for your day\n BUILDING INCLUSIVE WORKSPACES At Amrize, there is endless opportunity for you to play your part. Whether you're in a technical, managerial, or frontline role, you can shape a career that works for you. We're seeking builders, creative thinkers and innovators. Come put your expertise to work while developing the knowledge and skills to drive your career forward. With us you'll have the chance to build your ambition! Amrize North America Inc. takes pride in our hiring processes and our commitment that all qualified applicants will receive consideration for employment without regard to age, race, color, ethnicity, religion, creed, national origin, ancestry, gender, gender identity, gender expression, sex, sexual orientation, marital status, pregnancy, parental status, genetic information, citizenship, physical or mental disability, past, current, or prospective service in the uniformed services, or any other characteristic protected by applicable federal, state or local law. Amrize North America Inc, and its respective subsidiaries are Equal Opportunity Employers, deciding all employment on the basis of qualification, merit and business need. Amrize Canada Inc. is committed to the principles of employment equity and encourages the applications from women, visible minorities, and persons with disabilities. Amrize North America Inc. participates in E-Verify and will provide the federal government with your I-9 information to confirm that you are authorized to work in the United States. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request accommodation in order to apply for a position with us, please email . This email address should only be used for accommodations and not general inquiries or resume submittals. In Ontario, our organization/business is committed to fulfilling our requirements under the Accessibility for Ontarians with Disabilities Act. Under the Act, accommodations are available on request for candidates taking part in all aspects of the selection process. While we sincerely appreciate all applications, only candidates selected for an interview will be contacted. PROTECT YOURSELF FROM RECRUITMENT FRAUD The only way to apply for a position at Amrize is through our official Careers website. Be cautious of unsolicited offers or requests for information from other sources. Learn how to protect yourself from recruitment fraud here: Fraudulent Job Offers Policy

The Field Service Engineer provides field service engineering and technical assistance to customers in areas of installation, startup, maintenance & repair, training, and modification of equipment. This role is based out of Dallas, TX with 70% travel. Compensation will be based on experience and qualifications and will be discussed during the interview process. The salary range for this role is $105,000- $120,000 annually and offers a competitive benefits package. #LI-KR Every day at Hubbell is different and you'll contribute in many ways. On any given day, you'll make a difference by: • Performing installation and commissioning of power quality and energy meters at customer sites, ensuring that it functions correctly and meets the operational standards specified., • Performing routine maintenance and diagnosing problems with equipment. Assist in repairing or replacing faulty parts and ensuring that the equipment is operational again in a timely manner., • Providing remote & on-site technical support to customers, troubleshooting issues as they arise, and resolving them directly or advising them on the necessary steps to fix them., • Training customers in the use of EIG equipment safely and effectively, often providing hands-on training and detailed operational manuals., • B.S. in Electrical Engineering, or Diploma in Electrical Engineering (required), • Minimum three years of relevant experience (required), • Good understanding of industry standard communication protocols with an emphasis on Modbus, IEC 61850, DNP and BACnet., • Knowledge of software, integration and automation, industrial controls, PLCs, and industry SCADA practices is an asset., • Strong understanding of the power systems, metering applications industry practices and electrical equipment being serviced., • Excellent analytical skills to diagnose issues and determine the best way to fix them. Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently. The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses. We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe. Hubbell Utility Solutions Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications. HUS provides the critical components that allow the grid to reliably transmit and distribute energy, as well as the communications and controls technologies to make the grid smarter and more flexible. Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class. The above summary of position responsibilities and requirements is not intended, and should not be construed, to be an exhaustive list of duties, skills, efforts, physical requirements, or working conditions associated with the position. It is intended to be an accurate reflection of those principal position elements essential for making decisions related to position performance, employee development, and compensation.

The Embedded Firmware Test Engineer coordinates the activities of a group of Lab Technicians engaging in the testing of wiring devices and components thereof and works independently to oversee the tests and ensure tests are being completed. The Test Engineer designs, develops, modifies and evaluates electronic parts, components or integrated circuitry for electronic equipment, or other hardware systems and/or electrical engineering applications. #LI-CH1 Every day at Hubbell is different and you'll contribute in many ways. On any given day, you'll make a difference by: • Assisting with the scheduling of lab assignments and equipment maintenance to achieve efficient utilization of the Test Lab facilities., • Supporting certification agency representatives in the inspection and testing of wiring devices and their associated products., • Assisting with the design and devising of test procedures for new products, including the designing of any related test apparatus., • Reviewing and substantiating data, measurements and calculations to the satisfaction of both internal and outside agency representatives., • Setting up using standard procedures with Lab Techs to conduct testing of wiring devices and enclosures etc., • Training new Lab Technicians., • Setting up and operating all components in the high-power electrical test circuits. This includes components such as step-down transformer and its secondary taps, resistive and inductive load banks, secondary protective systems, and endurance machinery. Bachelor's Degree in Electrical Engineering or a related field (required) 3-6 years of experience in test and measurement environment (required) Ability to read complex blueprints and schematics to troubleshoot and repair Test Lab equipment. Working knowledge of applicable requirements of regulatory bodies such as U.L., CSA and the National Electrical Code. Experience with test and measurement equipment and methodologies for electrical systems Hubbell Incorporated Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently. The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses. We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe. Hubbell Utility Solutions Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications. HUS provides the critical components that allow the grid to reliably transmit and distribute energy, as well as the communications and controls technologies to make the grid smarter and more flexible. Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class. The above summary of position responsibilities and requirements is not intended, and should not be construed, to be an exhaustive list of duties, skills, efforts, physical requirements, or working conditions associated with the position. It is intended to be an accurate reflection of those principal position elements essential for making decisions related to position performance, employee development, and compensation.

The Manufacturing Engineer must have the ability to analyze problems and processes and offer solutions or work with senior engineers to implement solutions. Experience working with electronics, computers, automotive or robotics or similar technology field required. Compensation will be based on experience and qualifications and will be discussed during the interview process. The salary range for this role is $105,000 - $120,000 annually and offers a competitive benefits package. #LI-KR1 Every day at Hubbell is different and you'll contribute in many ways. On any given day, you'll make a difference by: • Assists in planning and designing processes for an electronics manufacturing facility ., • Maximizes efficiency by analyzing layout of equipment, workflow, assembly methods, and work force utilization in an electronic environment., • Daily tasks will involve working hand in hand with production in an Electronic Metering Production Department, • Determines the parts, equipment, and tools needed to achieve manufacturing goals according to product specifications., • Generates, reviews and updates work instructions and procedures as necessary to improve cycle times, cost and quality., • Works on projects/matters of limited complexity in a support role with other departments to assist in cost reduction and cycle time improvement., • Assists engineering with Prototype builds and creates all necessary documentation to transition product to production., • Assist production with ERP system (Netsuite/SAP) as necessary to ensure inventory and work orders are properly processed., • Bachelor's degree in manufacturing engineering/Mechanical Engineering or similar technical area., • 3-5 years' Experience in an electronics manufacturing environment where electrical testing of Printed Circuit boards and/or finished goods is performed, • Lean Six Sigma/5s Tools a Plus., • Experience with wiring, cable assemblies, PCB's, soldering and mechanical assembly of electronics strongly recommended., • Netsuite experience a plus, or ability to learn new software to assist production Hubbell Incorporated Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently. The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses. We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe. Hubbell Utility Solutions Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications. HUS provides the critical components that allow the grid to reliably transmit and distribute energy, as well as the communications and controls technologies to make the grid smarter and more flexible. Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class. The above summary of position responsibilities and requirements is not intended, and should not be construed, to be an exhaustive list of duties, skills, efforts, physical requirements, or working conditions associated with the position. It is intended to be an accurate reflection of those principal position elements essential for making decisions related to position performance, employee development, and compensation.

The Sustaining Engineer is responsible for leading and managing the design, development, and implementation of electronic and embedded systems. This role involves utilizing extensive expertise and leadership skills, driving innovation, ensuring compliance with industry standards, and providing mentorship to junior team members, contributing to the success and advancement of complex engineering projects within Hubbell. The Sustaining Engineer may also review vendor capability to support product development. Compensation will be based on experience and qualifications and will be discussed during the interview process. The salary range for this role is $130,000 - $140,000 annually and offers a competitive benefits package. #LI-KR1 Every day at Hubbell is different and you'll contribute in many ways. On any given day, you'll make a difference by: • Participating in the development of multiple products simultaneously. Taking on a lead role for selected development projects, managing the NPD process from design definition through design capture and verification to the hand-off to production., • Leading and participating in project reviews and in requirement gathering meetings with sales/marketing and systems engineering groups., • Being responsible for design flow from architecture through prototype testing and production documentation. This includes circuit design, component selection and evaluation, hardware verification and validation of new products., • Performing final design reviews on all circuits and board designs, including mechanical aspects, needed to be released for prototyping and for production., • Guiding creation of hardware bring-up and production test procedures and of plans to test/validate new designs. Assisting with the design verification and validation to ensure that the completed design meets the requirements., • Performing product sustaining activities for addressing hardware related field issues as needed. Bachelor of Science in Electrical or Computer Engineering, Computer Science, or equivalent degree (required) Proficiency with a proven track record in working with designs utilizing microprocessors, microcontrollers, digital signal processors, field-programmable gate arrays, high-speed A/D-D/A conversion, and power conversion (required) 6-10 years of embedded hardware design experience on industrial products Proficiency in CAD software and other relevant tools for electrical design, analysis, and simulation (required) Experience with test equipment and measurement methodologies for electrical systems Understanding design verification/validation and regulatory compliance testing (UL, CSA, FCC). Experience with C/C++ and Python preferred. Hubbell Incorporated Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently. The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses. We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe. Hubbell Utility Solutions Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications. HUS provides the critical components that allow the grid to reliably transmit and distribute energy, as well as the communications and controls technologies to make the grid smarter and more flexible. Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class. The above summary of position responsibilities and requirements is not intended, and should not be construed, to be an exhaustive list of duties, skills, efforts, physical requirements, or working conditions associated with the position. It is intended to be an accurate reflection of those principal position elements essential for making decisions related to position performance, employee development, and compensation.

The Manager I Test Engineering is responsible for overseeing the testing processes and activities within the engineering department. This position involves managing a team of test engineers, developing, and implementing test strategies, and ensuring that products meet quality and performance standards. The Manager I Test Engineering collaborates with cross-functional teams to improve testing methodologies and deliver high-quality products while meeting project timelines and budget constraints. Compensation will be based on experience and qualifications and will be discussed during the interview process. The salary range for this role is $120,000 - $140,000 annually and offers a competitive benefits package. #LI-KR1 • Every day at Hubbell is different and you'll contribute in many ways. On any given day, you'll make a difference by:, • Effectively coaching and professionally developing a team of Test Engineers. Regularly updating training needs and establishing a program to keep the skills of the team current, regular, and effective., • Implementing and maintaining the quality requirements in the manufacturing/repair/testing process., • Ensuring compliance with all safety, environmental and quality practices and procedures as outlined in organizational/departmental guidelines and SOPs as well as applicable federal, state, and local regulations., • Scheduling, assigning, and supervising/constructing work projects assigned to the Model Shop and Test Lab., • Coordinating the construction of stereolithography models to achieve maximum utilization of SLA equipment., • Ensuring the correct and safe building and handling of SLA models., • Designing and supervising the construction of tools, dies, fixtures, jigs, and models used in the Model Shop and Test Lab., • Selecting and scheduling machines and equipment for repairs or overhaul to maintain accuracy and reliability., • Contacting vendors and obtaining competitive prices prior to ordering of tools, materials, or contract services., • Maintaining records and files of test reports, programs for CNC, SLA models, time sheets, work sheets, vacation schedules, and all relevant information to maintain good records. Maintaining inventory of all tools and materials., • Bachelor's Degree in Engineering, Mathematics, Science, or related field (required), • 6-10 years of experience in managing engineering in areas of electronic, machining, structures, composites, finishing, assembly, and testing environment (required), • Experience as a Supervisor or Foreman, • Ability to set up and operate all machine shop equipment including presses, grinders, forming tools, and knowledge of fabrication methods, • A working knowledge of programming, set up, and running of CNC machinery, • Experience in the Stereolithography process. Familiar with electromechanical test lab procedures and equipment Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently. The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses. We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe. Hubbell Utility Solutions Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications. HUS provides the critical components that allow the grid to reliably transmit and distribute energy, as well as the communications and controls technologies to make the grid smarter and more flexible. Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class. The above summary of position responsibilities and requirements is not intended, and should not be construed, to be an exhaustive list of duties, skills, efforts, physical requirements, or working conditions associated with the position. It is intended to be an accurate reflection of those principal position elements essential for making decisions related to position performance, employee development, and compensation.

Job Description Kia Retailers are offering skilled and experienced military Veterans with the opportunity to begin an inspiring career as a Kia Certified Service Technician. To support this Kia Retailer initiative, Kia America, Inc. has established the Kia Veterans Technician Apprenticeship Program (VTAP). Job Description • Diagnose, maintain, and repair Kia vehicles including engine, transmission, steering, suspension, brakes, HVAC, and electrical components, • Complete repair orders and warranty request orders in accordance with established Kia and Retailer policies and procedures, • Test drive vehicles, and analyze, diagnose, and repair components and systems using Kia diagnostic strategies, special equipment, and tools KUS and ERS make no warranties (expressed or implied) or guarantees of employment to any individual seeking to participate in the Kia Veteran Technician Apprenticeship Program (VTAP). All employment decisions are at the discretion of the specific Kia Retailer to which an employment application is made, conditional upon meeting eligibility, skill, and experience requirements to participate in VTAP. Requirements Qualifications • Honorable Discharge, • Valid Drivers License from any state with a clean driving record, • Experience in a technical / mechanical field is required Kia VTAP Apprenticeship Highlights: • Full-time employment with a participating Kia Retailer, • A program designed specifically for Veterans facilitated by Veterans!, • Participation in a one-year competency-based GI Bill approved apprenticeship leading to Kia Service Technician certification, • Access to all tools, equipment, vehicles, and training needed to complete the apprenticeship and certification process, • Eligible Veterans may apply for and receive a substantial GI Bill© Monthly Housing Allowance (MHA) during their apprenticeship

Job Description Location: On-Site in Garden City Park & Field Work Schedule: Full-Time. Monday - Friday, 7 AM - 3:30 PM Pay: $17 - $20/hour Benefits: Health insurance (medical, dental, vision), EAP, PTO, paid holidays, 401K, ESOP (Employee Stock Ownership Plan) Power-Flo Technologies is seeking a Mechanic Helper to join our Pump and Motor Repair Team. What You’ll Do: • Assist mechanics with cleaning, painting, testing, and disassembling AC/DC motors & pumps., • Clean parts, • Maintain the tool areas, • Help troubleshoot & repair pumps, motors, and fans in-shop and on-site., • Use power tools, hand tools, and a multimeter for repairs., • Assist with the replacing & wiring of electric motors at job sites.What You Need:, • Mechanical/technical skills & experience with hand/power tools., • Ability to troubleshoot electrical & mechanical systems., • Basic PC knowledge & strong communication skills., • Valid driver's license (clean for 7 years).Physical Requirements:, • Stand for up to 8 hours, lift 50 lbs, and work on ladders/platforms., • Exposure to dust, loud noise, and temperature changes., • This position may require standing, stooping, bending, kneeling, crouching and/or reaching, • Good hand-eye coordination and fine motor skills may be required for hand tools, power tools, and other machinery Join our team and build your skills in a hands-on environment! About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Power-Flo Technologies is seeking an HVAC Sales Representative. We are a two location temperature controls distributor specializing in providing engineering, materials, and startup assistance for temperature control systems. As the HVAC Sales Representative, you will: • write orders and assist in selling HVAC controls., • Develop and maintain vendor relationships., • Develop and maintain relationships with an assigned customer base, including key accounts, ensuring their satisfaction with our products and services always., • Work with other branch personnel to ensure great customer service from the order to the delivery and beyond., • Schedule outside appointments with existing customers to review applications requirements, and uncover new opportunities, • Assist customers (in person or over the phone) during a sales inquiry, in an effective and efficient manner that encourages return business., • Accurately conducts the sales transactions by appropriately entering the customer order in the system., • Maintains an awareness of all product knowledge, information and promotions. Suggests alternative product when appropriate., • Picks and fills orders when appropriate. Assures that orders leaving the warehouse are checked and accompanied, by the appropriate documentation., • Purchase special order material, for customers, as per company procedure. Expedite open orders., • Process product returns, per company procedure assuring that all documentation is collected., • Continually enhance sales skills and product knowledge to promote a professional image in the field., • Monitor sales trends and product performance results. Necessary Qualifications: • 2+ years of HVAC sales experience required, • HVAC product and vendor knowledge, • Demonstrated ability to communicate clearly and concisely in written and verbal formats, • Strong customer service orientation, • High school diploma or equivalent, as determined by the company, • Must have a valid and clean driver's license to travel to vendors and customers in the LI/NYC area Pay & Benefits: • Wage Commensurate with experience ($60,000 - $80,000 annually), • Medical, dental, and vision, • PTO Program and Paid Holidays, • 401K, • EAP, • ESOP (Employee Stock Ownership Plan), • Commission Potential With over 300 team members across 11 different locations, Power-Flo Technologies is an ever-growing group of companies headquartered in Long Island, NY. Power-Flo Technologies is the premier provider of supplies, services, and solutions to the electrical, industrial, mechanical, and automation industries. With teamwork at the forefront of our vision, we foster opportunities for learning and professional development while providing on-the-job training. Visit for details on the company. We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Kia Retailers are offering skilled and experienced military Veterans with the opportunity to begin an inspiring career as a Kia Certified Service Technician. To support this Kia Retailer initiative, Kia America, Inc. has established the Kia Veterans Technician Apprenticeship Program (VTAP). Job Description • Diagnose, maintain, and repair Kia vehicles including engine, transmission, steering, suspension, brakes, HVAC, and electrical components, • Complete repair orders and warranty request orders in accordance with established Kia and Retailer policies and procedures, • Test drive vehicles, and analyze, diagnose, and repair components and systems using Kia diagnostic strategies, special equipment, and tools KUS and ERS make no warranties (expressed or implied) or guarantees of employment to any individual seeking to participate in the Kia Veteran Technician Apprenticeship Program (VTAP). All employment decisions are at the discretion of the specific Kia Retailer to which an employment application is made, conditional upon meeting eligibility, skill, and experience requirements to participate in VTAP. Requirements Qualifications • Honorable Discharge, • Valid Drivers License from any state with a clean driving record, • Experience in a technical / mechanical field is required Kia VTAP Apprenticeship Highlights: • Full-time employment with a participating Kia Retailer, • A program designed specifically for Veterans facilitated by Veterans!, • Participation in a one-year competency-based GI Bill approved apprenticeship leading to Kia Service Technician certification, • Access to all tools, equipment, vehicles, and training needed to complete the apprenticeship and certification process, • Eligible Veterans may apply for and receive a substantial GI Bill© Monthly Housing Allowance (MHA) during their apprenticeship

Job Description Location: On-Site in Garden City Park & Field Work Schedule: Full-Time. Monday - Friday, 7 AM - 3:30 PM Pay: $17 - $20/hour Benefits: Health insurance (medical, dental, vision), EAP, PTO, paid holidays, 401K, ESOP (Employee Stock Ownership Plan) Power-Flo Technologies is seeking a Laborer to join our Pump and Motor Repair Team. What You’ll Do: • Assist mechanics with cleaning, painting, testing, and disassembling AC/DC motors & pumps., • Clean parts, • Maintain the tool areas, • Help troubleshoot & repair pumps, motors, and fans in-shop and on-site., • Use power tools, hand tools, and a multimeter for repairs., • Assist with the replacing & wiring of electric motors at job sites.What You Need:, • Mechanical/technical skills & experience with hand/power tools., • Ability to troubleshoot electrical & mechanical systems., • Basic PC knowledge & strong communication skills., • Valid driver's license (clean for 7 years).Physical Requirements:, • Stand for up to 8 hours, lift 50 lbs, and work on ladders/platforms., • Exposure to dust, loud noise, and temperature changes., • This position may require standing, stooping, bending, kneeling, crouching and/or reaching, • Good hand-eye coordination and fine motor skills may be required for hand tools, power tools, and other machinery Join our team and build your skills in a hands-on environment! About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Location: On-Site in Garden City Park & Field Work Schedule: Full-Time. Monday - Friday, 7 AM - 3:30 PM Pay: $17 - $20/hour Benefits: Health insurance (medical, dental, vision), EAP, PTO, paid holidays, 401K, ESOP (Employee Stock Ownership Plan) Power-Flo Technologies is seeking a Mechanic Helper to join our Pump and Motor Repair Team. What You’ll Do: • Assist mechanics with cleaning, painting, testing, and disassembling AC/DC motors & pumps., • Clean parts, • Maintain the tool areas, • Help troubleshoot & repair pumps, motors, and fans in-shop and on-site., • Use power tools, hand tools, and a multimeter for repairs., • Assist with the replacing & wiring of electric motors at job sites.What You Need:, • Mechanical/technical skills & experience with hand/power tools., • Ability to troubleshoot electrical & mechanical systems., • Basic PC knowledge & strong communication skills., • Valid driver's license (clean for 7 years).Physical Requirements:, • Stand for up to 8 hours, lift 50 lbs, and work on ladders/platforms., • Exposure to dust, loud noise, and temperature changes., • This position may require standing, stooping, bending, kneeling, crouching and/or reaching, • Good hand-eye coordination and fine motor skills may be required for hand tools, power tools, and other machinery Join our team and build your skills in a hands-on environment! About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description🌟 Be a Part of Something Bigger! 🌟 At Luminator Technology Group, we believe we are Better Together. We always put the Customer First, focus on achieving Results, strive to Be the Best, and foster a culture of Respect & Trust. We are on a mission to innovate and revolutionize global transportation technology. Luminator is a global leader spanning over 85 countries and nearly 1,000 employees worldwide. We’re searching for a Field Service Technician - NICE & NYCT to join our growing Product Support team and play a key role in driving our vision forward. What You’ll Do: As a Field Service Technician, you will be at the heart of our customer success, providing hands-on expertise to maintain, troubleshoot, and repair cutting-edge transit equipment. You’ll: • Maintain and troubleshoot Luminator’s hardware and software., • Handle customer inquiries and provide technical support., • Stay current with company products, installation methods, and safety guidelines., • Perform on-site pre-start-up, start-up, service work, warranty, and training., • Diagnose and resolve technical issues., • Accurately document all work performed, including preventive and corrective maintenance., • Communicate effectively with plant operators, management, vendors, and team members., • Review product prints and specifications., • Participate in projects such as upgrades and new installations., • Ensure products are installed to specifications., • Coordinate with other teams to meet commitments., • Document processes and follow company protocols., • Operate vehicles safely and use field systems appropriately., • Collaborate with the technical team and share information., • Technical Savvy: Proficiency with electrical systems, automotive wiring, voltmeters, and small tools., • Customer Focus: Strong interpersonal skills to handle demanding situations and deliver exceptional service., • Problem-Solving Skills: Ability to diagnose, resolve, and communicate complex technical issues effectively., • Qualifications:, • 2-4 years of technical experience., • High school diploma or equivalent (AS degree and A+ certification preferred)., • Familiarity with tools like MathWorks, AutoCAD, Microsoft Visual Basic, and SCADA software is a plus., • Competitive compensation with career growth potential., • Generous time off: Vacation and sick time, 10 company holidays, and 2 floating holidays., • Educational Assistance Program: Robust reimbursement program for professional growth., • Health and wellness: Medical, dental, and vision coverage plus 401k matching. Luminator Technology Group intends to provide a safe and drug-free work environment for our customers and our employees. As a condition of employment Luminator Technology Group will require a negative drug screen during the pre-employment process due to working on or with federal contracts. It is the policy of Luminator to ensure equal employment opportunity without discrimination or harassment on the basis of race, color, religion, sex, sexual orientation, gender identity or expression, age, disability, marital status, citizenship, national origin, genetic information, or any other characteristic protected by law. Luminator prohibits any such discrimination or harassment. The above described responsibilities and requirements are a general guide for the role you are applying for and are not all inclusive of the job requirements. Luminator Technology Group does not accept staffing agency candidates for our postings. All positions posted are required to be in office unless otherwise posted. Powered by JazzHR NupiwBG7Xi

Experience with robotic or electromechanical operation and maintenance. Maintenance Mechanic (Mechatronics & Robotics Technician). Associates or higher degree from a vocational school or college with a focus in the Mechanical or Electrical field.