Electrical field jobs in Poughkeepsie, New YorkCreate job alerts

Job Description Hudson River Housing improves lives and communities through housing with compassion and development with vision. We are dedicated to building strong, sustainable communities by developing and preserving quality affordable housing and helping families and individuals obtain and maintain housing through education, advocacy and support services. We are a committed group of people from all backgrounds who care deeply about our community and want to make it a better place. Position: Maintenance Technician General Description: The Maintenance Technician responsible for routine plumbing, carpentry, masonry, electrical, HVAC and construction for all HRH owned properties. Will also be responsible for basic service to equipment as needed. Principal Duties: • Provide routine maintenance and repairs for all buildings, grounds and equipment as indicated above., • While performing daily tasks, if any repairs are observed they should be reported to the Facilities Supervisor., • Expected to leave a job upon completion or at the end of a work day as “broom clean”., • Proper housekeeping must be maintained in the workshop and storage areas., • Pickup equipment and/or supplies, as needed., • As maintenance supplies need to be replenished shortages should be reported to the Facilities Supervisor.., • Power tools and equipment must be locked and secured in designated storage areas when not in use., • Perform work assignments in accordance with all safety requirements. Protective Equipment must be worn as applicable., • Provide snow shoveling, plowing, sanding and salting as required for all sites. On-call availability for emergency repairs and related situations, such as snow removal is required. (Nights and Weekends). Experience: Education/Knowledge/Experience: Proven experience for a minimum of 5 years in the building maintenance field including plumbing, carpentry, masonry, HVAC and electrical, Must have a good understanding of basic construction and general small equipment repair skills. Required Behaviors: Ability to work independently but also able to function as part of a team. Must have a good attention to detail, able to follow directions and have a sense of pride in completed work. Must be dependable and able to maintain an openness to a rotating daily work schedule. Must also have a high energy level, able to stand for long periods of time, be able to lift at least 70 pounds, go up and down stairs while carrying things, work in extreme temperatures outdoors and able to climb a ladder. Salary: $25.00 - $27.00 Location: Poughkeepsie, NY Immediate Supervisor: Director of Facilities Equity is a core value at Hudson River Housing. We believe in promoting a culture that decenters bias, celebrates difference, enhances equitable communication, and nurtures relationship building. It is important to us that community members have access to stable means of economic growth. We are continually committed to hiring from within our community including applicants with lived experience that can inform and strengthen our work. Hudson River Housing is dedicated to maintaining a work environment that is free from harassment and discrimination on the basis of age, race, creed, color, national origin (including ancestry), religion, gender or sex, gender identity or expression, sexual orientation, pregnancy (including childbirth and related medical conditions), alienage or citizenship status (unless required by law), disability, reproductive health decision making (including, but not limited to, the decision to use or access a particular drug, device, or medical service), marital status, partnership status, caregiver status, domestic violence victim status, familial status, military status, unemployment status, genetic information (including genetic characteristics), or any other protected status under federal, state, or local laws. Hudson River Housing is dedicated to the fulfillment of this policy with respect to all aspects of employment, including, but not limited to, recruiting, hiring, placement, transfer, training, promotion, compensation, termination, and all other terms, conditions, and privileges of employment.

Job Description Kia Retailers are offering skilled and experienced military Veterans with the opportunity to begin an inspiring career as a Kia Certified Service Technician. To support this Kia Retailer initiative, Kia America, Inc. has established the Kia Veterans Technician Apprenticeship Program (VTAP). Job Description • Diagnose, maintain, and repair Kia vehicles including engine, transmission, steering, suspension, brakes, HVAC, and electrical components, • Complete repair orders and warranty request orders in accordance with established Kia and Retailer policies and procedures, • Test drive vehicles, and analyze, diagnose, and repair components and systems using Kia diagnostic strategies, special equipment, and tools KUS and ERS make no warranties (expressed or implied) or guarantees of employment to any individual seeking to participate in the Kia Veteran Technician Apprenticeship Program (VTAP). All employment decisions are at the discretion of the specific Kia Retailer to which an employment application is made, conditional upon meeting eligibility, skill, and experience requirements to participate in VTAP. Requirements Qualifications • Honorable Discharge, • Valid Drivers License from any state, • Experience in a technical / mechanical field is required Kia VTAP Apprenticeship Highlights: • Full-time employment with a participating Kia Retailer, • A program designed specifically for Veterans facilitated by Veterans!, • Participation in a one-year competency-based GI Bill approved apprenticeship leading to Kia Service Technician certification, • Access to all tools, equipment, vehicles, and training needed to complete the apprenticeship and certification process Pay: $20.00+ per hour Benefits: • Dental insurance, • Health insurance, • Paid time off Schedule: • Day shift

Job Description We are currently hiring a Jr. Structural Engineer to join our Building Engineering Division in our Poughkeepsie, NY office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Structural Discipline provides structural engineering services with emphasis on new design, repair, and rehabilitation of constructed works, as well as investigation and performance evaluation. This position will work closely under the supervision of a Senior Structural Engineer to develop concepts, strategies, designs, drawings, specifications and reports. Individual must be able to work independently, as well as part of multi-discipline teams. Candidates will work on an interesting variety of project types including K-12 and higher education, municipal, health care, industrial, commercial, and other unique projects. This role can accelerate your career goals through immediate opportunities to lead in a creative friendly environment, and comes with a competitive starting salary, incentive compensation, and a comprehensive benefit package. Salary Range: $62,000 - $69,500 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Duties • Determine structural loading criteria, perform complex design calculations, and prepare structural specifications., • Perform field investigations and document findings., • Work closely with other engineering and architectural disciplines., • Produce construction documents using Revit (BIM)., • Qualified candidates must have a Bachelor of Science degree in Civil Engineering with structural coursework., • Engineering in Training Certificate (E.I.T.) required., • Master of Science degree in Structural Engineering is preferred., • 0 to 5 years of experience with concrete, steel, masonry, and/or wood design is required. Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description We are currently hiring a Senior Plumbing and Fire Protection Engineer in our Building Engineering division at our Poughkeepsie, NY office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Senior Plumbing and Fire Protection Engineer will work with clients to provide plumbing, and fire protection designs, studies and technical support as required to fulfill project requirements. Typical projects will involve field work, design, and construction administration services. A successful candidate will be able to work well in a team, provide leadership to Jr Engineers, and be capable of developing new business. This position offers the opportunity to transition into a leadership role for the office. Duties: • Supervise plumbing and fire protection engineering staff to develop concepts, strategies, construction documents and engineering reports for new buildings and renovation projects., • Ability to provide mechanical leadership for both large multi-discipline design projects including plumbing, process piping systems, and fire protection design., • Responsible for code review of plumbing and fire protection systems., • Responsible for plumbing and fire protection design related to corrections, higher education, laboratory, medical, and other typical market sectors., • Ability to complete fire protection hydraulic calculations using industry software programs., • Interact directly with clients technically by completing analysis of design options, cost benefit comparisons, and communicating results to assist owner in decision making process., • Responsible for directing plumbing and fire protection project team to meet project goals and maintain quality work product., • Manage the mechanical project financial performance and schedule., • Client and Business Development., • Proposal writing to initiate new business., • Minimum of 10 years of experience with a professional A/E services firm is preferred, • Bachelor’s degree in Mechanical Engineering is preferred, • Strong writing, organizational and communications skills, • Ability to work under pressure, and multi-task efficiently, • New York Professional Engineer’s License is a preferred Salary Range: $90,000 - $120,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description We are currently hiring a Mechanical Engineer in our Building Engineering Division at our Poughkeepsie, NY office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Mechanical Engineer will work with engineers as part of a project team to provide HVAC, plumbing, and fire protection designs, studies and technical support as required to fulfill project requirements. Typical projects will involve field work, design, and construction administration services. A successful candidate will be able to work well in a team to develop concepts, strategies, designs, drawings, specifications and reports for Building and Renovation projects. Responsibilities • System selection and calculations for design purposes, • Conduct field work to document existing conditions, • Work with Jr Engineers to develop drawings with building modeling software, • Work independently and as part of a team to complete project designs, • 4 – 6 years of experience working at an A/E consulting firm is preferred, • Bachelor’s degree in mechanical engineering is preferred., • Well rounded experience in HVAC, plumbing, and fire protection, • Experience with Revit or AutoCAD is preferred., • Field experience is preferred, • New York State Professional Engineer’s license is a plus. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description Full-time | Professional Locations: Clifton Park, Cohoes, East Syracuse, Monroe, New Windsor, Poughkeepsie, Staten Island, Syracuse, Wappingers Falls, NY Why Join Rezolut? At Rezolut, we’re redefining diagnostic imaging services across the Northeast. We focus on delivering exceptional Mammography care, leveraging advanced technology and a patient-first mindset. If you are a GE or Hologic Mammography expert looking for hands-on work, career growth, and the ability to make a real impact, this is your opportunity.What You’ll Do • Lead service, maintenance, and repair of GE and Hologic Mammography systems, ensuring the highest standards of performance., • Perform preventive maintenance, calibrations, quality control (QC), and quality assurance (QA) according to OEM specifications., • Troubleshoot complex mechanical, electromechanical, and electronic issues on Mammography equipment., • Maintain accurate service records and communicate effectively with customers, ensuring rapid resolution of issues., • Collaborate with team members while operating independently in the field., • Travel regularly to customer sites throughout the Northeast.What We’re Looking For, • Strong hands-on experience servicing GE and Hologic Mammography equipment (minimum 2+ years)., • Associate’s degree, OEM Radiology, Electrical, or Technology training preferred., • Proficient with computer tools (MS Word, Excel, PowerPoint, Outlook)., • Excellent problem-solving, analytical, and communication skills., • Self-motivated, adaptable, and able to thrive in a fast-paced environment., • Valid driver’s license with a clean record.Nice to Have, • Experience with other imaging modalities (Ultrasound, MRI, CT, X-ray) and OEM brands such as GE and Hologic., • Customer-focused service experience in a healthcare environment.What We Offer, • PTO accrual from day one (Full-Time), • 6 Observed Holidays, • Medical, Dental, Vision, Life, and voluntary insurance options, • 401(k) Retirement Plan, • Employee Assistance ProgramJoin us and be a key part of a team that delivers excellence in Mammography imaging across the Northeast.

Job Description Full-time | Professional Locations: Clifton Park, Cohoes, East Syracuse, Monroe, New Windsor, Poughkeepsie, Staten Island, Syracuse, Wappingers Falls, NY About Rezolut Rezolut is a national emerging platform of diagnostic medical imaging services, focused on delivering high-quality patient care with innovative technology. We provide fixed-site and mobile outpatient imaging services, positioning ourselves as leaders in radiology across all modalities.Position Overview Rezolut is seeking a Medical Imaging Equipment Engineer to service, maintain, and repair Siemens Mammography, MR, and Ultrasound systems across our network in the Northeast. While Siemens certification is required, experience servicing other diagnostic imaging modalities—such as GE and Hologic—is highly valued. This position requires travel and offers training, career growth, competitive pay, PTO, and benefits.Primary Responsibilities • Troubleshoot, install, maintain, and repair Siemens Mammography, MRI, and Ultrasound systems., • Service additional diagnostic imaging equipment from GE, Hologic, or other OEMs, as needed., • Complete preventive maintenance, modifications, setup, calibration, QC, and QA per OEM specifications., • Maintain service records, daily customer communications, and follow-up to ensure resolution., • Maintain tools, test equipment, and ensure proper calibration., • Work collaboratively with internal teams while also operating independently in the field., • Lift, carry, and transport tools and equipment as required., • Adhere to HIPAA, OSHA, FDA, and other regulatory requirements., • Establish and maintain professional relationships with customers and peers.Required Education & Experience, • Siemens certification for diagnostic imaging systems is required., • Associate's degree or equivalent technical training; OEM Radiology, Electrical, or Technology experience preferred., • Minimum 2+ years of experience servicing diagnostic imaging equipment, including Siemens systems., • Experience with mechanical, electromechanical, and electronic diagnostic imaging systems., • Proficiency with MS Word, PowerPoint, Excel, and Outlook., • Excellent analytical, communication, and problem-solving skills., • Ability to work independently in a fast-paced environment with changing priorities., • Valid driver’s license and clean driving record., • Must be able to travel regularly.Preferred Experience, • Hands-on experience with other OEM imaging systems: GE, Hologic, etc., • Customer-focused service experience in medical imaging environments.Benefits, • PTO accrual from day one (Full-Time), • 6 Observed Holidays, • Medical, Dental, Vision, Life, and voluntary insurance options, • 401(k) Retirement Plan, • Employee Assistance ProgramJob Type: Full-time

Job Description At PEARCE, we've got a career for you! Join the nation's leading independent service provider for critical telecommunication and renewable energy infrastructure. We are the premier independent service provider for our nation's critical infrastructure. With over 2,500 team members nationwide, Pearce delivers comprehensive engineering, maintenance, repair, and repowering solutions, ensuring the seamless operation of our nation's wireless and wireline telecom, commercial and utility-scale solar and wind projects, EV charging stations, as well as large-scale power generation, critical power and energy storage assets. Your Impact Pearce is seeking Experienced HVAC Technicians to join our team for servicing and repairing commercial HVAC package units on Cell Tower Sites. This is a fast-paced and rewarding job that is best suited for individuals who are responsible, self-directed, highly motivated, willing to travel, and looking to learn and grow in the Telecom industry. This is a regional position. Candidates should reside in the Poughkeepsie, New York area. Core Responsibilities • Maintaining commercial package cooling systems on Cell Phone Towers – diagnosing, troubleshooting, repairing, or installing and replacing components of entire systems., • Conducting performance checks and regular maintenance on HVAC equipment., • Performing additional maintenance or upgrades to out-of-season HVAC equipment., • Responding to service calls in a timely manner, including emergency call out services., • Timely and accurate completion of daily work reports. Core Experience • Must be Level 2 or Universal EPA Certified (Required)., • 3+ years of experience with HVAC maintenance (commercial preferred)., • Basic knowledge of electronic, mechanical, and electrical components including refrigeration systems is preferred. At Pearce safety is our number one concern. Candidates must be able to comply with OSHAFCC/FAA/EPA Standards. • Candidates should reside in the Poughkeepsie, New York area., • Must be available for after-hours and weekend call outs on occasion., • Extensive daily travel in an independent work structure., • Occasional overnights required-company pays all travel costs and provides per diem., • Driving to remote work sites as needed., • Be exposed to ambient temperatures while working outdoors., • Lift and move equipment as needed (up to 50 pounds). At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range$30—$38 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. At PEARCE, we are an equal opportunity employer dedicated to cultivating an inclusive environment that empowers employees to excel and make a meaningful impact, providing a dynamic space for field technicians, service specialists, and corporate professionals to flourish and propel their careers forward within our nationwide presence and expansive service offerings. Learn more about us at !

Are you a skilled salesperson with electrical knowledge looking for a high-earning opportunity? We are seeking a Senior Sales Representative to handle field sales for plumbing jobs in Los Angeles.This is a commission-based role with 5% commission per sale, no service call fee, and a steady flow of h

Candidates seeking an Officer position in this community must have a bachelor’s degree from a regionally accredited institution in a technical field, preferably in one of the following fields: Information Systems, Electrical Engineering, Computer Engineering, Information Operations, Computer Scien

Job Description Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufactures of precision machined parts in the United States. Our mission is to help manufacturers maintain a competitive advantage in the world economy by improving productivity. Summary of Responsibility: A Field Service Technician is a key member of the Customer Support Department and is primarily responsible for the installation, preventive maintenance, solving and repair of Computer Numerically Controlled (CNC) Lathe, Milling and Multi-Functional Machining Centers. We are seeking customer focused professionals who have a positive attitude, a high interest in learning and great Customer service skills. This opportunity is an above average platform for technical advancement and compensation growth. What You Will Contribute: The CNC Field Service Technician must have or be willing to learn through training on the job and classroom an understanding of mechanical drawings, electrical/pneumatic/hydraulic schematics, PLC ladder diagrams and testing equipment required to effectively diagnose and resolve issues with electrical/mechanical components, as well as electro-mechanical and machine control systems. • Daily travel from home to Customer facilities with occasional overnight hotel stays required when servicing remote Customer locations within the designated coverage territory or when participating in remote training programs., • Demonstrating a willingness to help others and be a team member, • Install, commission, calibrate, maintain, tackle, diagnose, and repair CNC equipment and accessory CNC equipment at customer facilities. Service calls also include operator training, networking between systems, software applications, preventive maintenance, major assembly replacements and alignments, overhauls/refurbishments, upgrades/retrofits, and un-installation services., • Provide a direct communication link between the Customer and the Service Group of the Robert E. Morris Company., • Provide voice of Customer feedback., • Through service and Customer relationships, build brand dedication., • Conduct travel and work in a safe manner, constantly learning new technology and soft skills., • Apply machine tool manuals, technical documents, as well as internal and external authorities to optimally diagnose and resolve CNC equipment issues., • Proficient verbal and written communication and Customer relation skills., • Able to interact and effectively communicate in person and over the phone with customer and co-workers., • Present a professional image., • Must be adaptable to changes and able to deal with change, delays, or general work-related issues., • Basic digital literacy and shown understanding of MS Word, Excel, and Outlook., • Must have, and/or be willing/capable of being trained to develop, electro-mechanical skills (motors, drives, transformers etc.)., • Knowledge of machine tool manufacture, installation, operation, maintenance & repair and/or a broad shop background – is a plus., • Basic mechanical and logical solving skills are a must. What’s in it for You: • We take great pride in our employees and offer a variety of benefits that allow our employees to be successful inside and outside of work:Competitive starting salary, • Market competitive comprehensive health benefits including a zero premium medical plan offering, vision, dental, and company paid life insurance, • 3+ Weeks’ Vacation to Start, • 10 Company Paid Holidays, • 401(k) retirement plan with company contributionTuition reimbursement, • Employee appreciation events and perksEmployee Assistance Program Mental and Physical Requirements: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Must be highly mobile, able to access all areas of the premises., • Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities, and projects., • Ability to sit for prolonged period of times., • Able to perform bending, twisting, stooping, reaching, and lifting of moderate to heavyweight material up to 50 lbs. with assistance from equipment or other employees., • Ability to frequently use hands and arms., • Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus. Requisition #: 1442B, Poughkeepsie NY

Job Description We are looking for gym equipment installers/technician Responsibilities: *Providing service and customer support during field visits and/or installations *Managing all on site installation, repair, maintenance and test tasks *Diagnosing errors or technical problems and determining proper solutions *Email communications *Must have a valid and clean driver's license Desired skills and experience: *Electrical/electronics knowledge preferred, but not required. *Familiarity with mobile tools and applications *Positive attitude *Be able to work as a team *The ability to travel Benefits: *Daily meal reimbursement *Travel expenses paid *Vacation *Health insurance reimbursement *401k *Bonuses We have part - time, full - time, and seasonal positions available. Starting compensation can range from $16/hour to $25 for those with more of the desired skills. Company DescriptionWe are a full service distributor for the #1 sunbed manufacturer in the world. We install equipment to the biggest franchise fitness centers and other salons in the industry in the northeast. Our goal is to provide outstanding service to our customers in each of our installations.We are a full service distributor for the #1 sunbed manufacturer in the world. We install equipment to the biggest franchise fitness centers and other salons in the industry in the northeast. Our goal is to provide outstanding service to our customers in each of our installations.