Electrical field jobs in Newburgh, New YorkCreate job alerts

Job Description General Summary A maintenance technician performs general maintenance and repair of equipment and buildings. This requires practical skills and knowledge (not proficiency) in such trades as: painting, plumbing and electrical work. Essential Duties and Responsibilities • General Maintenance and repairs of installed equipment and systems to include all aspects of plumbing, compressed gas systems, pumps, compressors, blowers, fans and electrical motors., • Performs or assist in the performance of the following: rebuilding pumps and compressors, replacing bearings and seals, repair or replace plumbing systems or components, install treaded or sweated pipe segments, repair or replace refrigeration components, and perform maintenance of installed irrigation systems., • Perform preventative maintenance as assigned., • Maintains the general cleanliness and appearance of assigned spaces, assist others as part of the maintenance team as required and perform other duties assigned according to personal qualifications. Knowledge, Experience and Skill Requirements • Minimum of three (3) years’ experience in healthcare facilities, • Excellent oral and written communication skills., • Knowledge of computer software programs to include Word, Excel, Power Point and Outlook required., • Experience with a Facility Computerized Maintenance Management System software (CMMS) highly desired., • High School Graduate, technical or trade school certificates in related field desired. Work Environment • Must be able to lift 50 lbs., squat, bend, stoop and kneel for short periods, climb a ladder, stand for long periods of time, constant arm extensions., • Occasional exposure to elements such as heat, cold, noise, dust, dirt, chemicals, but none to the point of being disagreeable. May involve minor safety hazards where likely result would be cuts, bruises, etc., • Must be able to pass a local background check and have the ability to obtain and maintain NAC/LAC clearance after hire. Disclaimer CBRE Government and Defense is thrilled at the opportunity for you to apply to one of our roles. The minimum pay rate for this position is $36.42. This position may also be eligible for a wide range of competitive benefits that can include but not limited to: medical, well-being, financial planning and short-term incentives benefits. This description is not intended to be an “all inclusive” list of the accountabilities of the job described. Rather, it describes the general nature of the job. In addition, some aspects of this job may change over time, according to business needs, and these changes may not be recorded immediately. The requirements stated represent the minimum levels of knowledge, skills and/or abilities to qualify and satisfactorily perform this job. THIS DOCUMENT SHOULD NOT BE CONSTRUED AS CREATING A CONTRACT OF EMPLOYMENT BETWEEN CBRE GOVERNMENT & DEFENSE SERVICES AND ANY OF ITS EMPLOYEES OR OTHERWISE ALTERING AN EMPLOYEE’S AT WILL EMPLOYMENT RELATIONSHIP WITH CBRE GOVERNMENT & DEFENSE SERVICES.

This is a position for candidates within an hour of Fishkill, NY. Duravant’s Life Cycle Services division requires all Field Service Technicians to travel to customer sites to perform total equipment lifecycle management services. This includes installations, preventative maintenance, start-up/commissioning, troubleshooting issues, and provide upgrades/modernizations. Duravant Field Service Technician: • Conduct field service calls at customer sites to provide installation, commissioning, emergency repair, technical support, preventive maintenance, audits, retrofits and training services., • Perform mechanical, electrical, troubleshooting for PLC programs and servo drive configuration., • Achieve service delivery goals including response time, first time fix and customer satisfaction rates., • Responsible for timely and accurate documentation of all service activities., • Provide equipment reliability feedback to quality engineering and collaborate on improvements., • Participate in cross-training and cross-functional teams with other Duravant operating companies. Duravant Field Service Technician Competencies: If you hold any of these qualifications please apply. • Degree of knowledge and experience of mechanical, hydraulic, electrical, and pneumatic components., • Ability to interpret complex technical information involving mechanics and electronics, including schematics and mechanical engineering documentation., • Knowledge of AB CompactLogix and various other PLCs knowledge/experience in operation, troubleshooting, and modifications., • AB PanelView and various types of HMI programming and troubleshooting., • Variable Frequency Drive (VFD) parameter configuration and programming., • Depth-full understanding of Servo drive motor systems and configuration. Duravant Field Service Technician Job Requirements: • High School Diploma or equivalent required., • Associate or bachelor’s degree in Mechatronics is desired., • EE, EET, EECS or Industrial Electronics degree is a plus, • 2+ years of experience in the maintenance, installation and troubleshooting of large capital equipment required., • Strong mechanical and electrical background required., • Solid understanding and programming of PLCs is a plus., • Must have a valid driver's license, valid passport, and a good driving record., • Travel extensively, up to 80% this can be regionally, nationally, or internationally Duravant Field Service Technician benefits: • Overtime available, • Time and half on weekends, • Shared company-paid premium health benefits with buy-up options., • Health Savings Account (HSA) options, • Company-paid telemedicine program., • Company paid Long-term Disability Plan and Basic Life and AD&D., • 401(k) employer matching plan., • Company discount program for you and your family (e.g., concerts, sporting events, health and wellness, travel, gifts and more!)., • Employee Assistance Program (EAP) that assists with guidance on childcare, financial planning, pet care and more.

About Us We are a fast-growing Ready-to-Eat (RTE) food manufacturing facility dedicated to producing safe, high-quality products that meet the highest standards of USDA, FDA, and third-party regulatory compliance. Food safety is at the core of everything we do. We pride ourselves on a culture of accountability, continuous improvement, and operational excellence especially within a high-risk RTE environment. About the Opportunity Cafe Spice is seeking a Maintenance Manager Processing & Facilities to lead and oversee both production equipment and facility infrastructure within our fast-paced, USDA and FDA regulated food manufacturing environment. This is a critical leadership role responsible for ensuring the reliability, safety, and performance of all processing equipment and plant utilities, while driving operational efficiency and minimizing downtime. What You’ll Do • Lead and manage maintenance operations across processing, packaging, and facility systems, • Oversee equipment including kettles, conveyors, tray sealers, filling lines, chillers, ovens, and automation systems, • Manage facility infrastructure including HVAC, boilers, refrigeration, electrical systems, fire protection, and utilities, • Develop and execute preventive and predictive maintenance programs to maximize uptime and asset life, • Troubleshoot complex mechanical, electrical, pneumatic, hydraulic, and automation systems, • Ensure compliance with USDA, FDA, HACCP, GMP, OSHA, and all safety/regulatory requirements, • Partner cross-functionally with Production, FSQA, Sanitation, and Operations teams, • Utilize Fiix CMMS and ERP systems to manage work orders, maintenance schedules, asset tracking, and reporting, • Lead capital projects, equipment upgrades, and continuous improvement initiatives, • Manage budgets, vendor relationships, and procurement of parts and services, • Oversee emergency response and ensure operational continuity across the plant, • Build and develop a high-performing maintenance team focused on safety, accountability, and performance What You Bring • Bachelor’s degree in Mechanical Engineering, Facilities Management, Industrial Technology, or related field (or equivalent experience), • 5+ years of maintenance leadership experience in a food manufacturing or industrial environment, • Strong technical expertise in:, • Food processing & packaging equipment, • HVAC, boilers, refrigeration systems (ammonia/Freon), compressed air, wastewater systems, • Electrical and mechanical systems, • Experience with CMMS and ERP systems, • Knowledge of PLCs and industrial automation is a strong plus, • Proven ability to lead teams, manage budgets, and drive cross-functional collaboration, • Strong understanding of regulatory compliance and food safety standards Why Join Cafe Spice? • Be part of a growing, innovative food manufacturing company, • Play a key leadership role in driving operational excellence, • Opportunity to lead both equipment and facility strategy in one integrated role, • Collaborative, fast-paced environment with strong leadership support

Job Description Electro-Mechanical Barrier Systems Technician (High-Security ACP Barriers, Delta Wedges & Booth Controls) Location: Upstate NY Employment Type: Full-Time Clearance/Access: Ability to obtain base access; background check required Travel: Travel is a must — regular travel throughout DC, MD, VA, PA, and NY Industry: Federal Facilities / Security Infrastructure / O&M Position Overview We are seeking an experienced Electro-Mechanical Barrier Systems Technician to support, troubleshoot, and repair high-security Access Control Point (ACP) equipment including wedge barriers, pop-up barriers, sliding gates, bollards, guard booths, and all related control panels. The ideal candidate has strong experience with Delta Scientific, B&B ARMR, or similar crash-rated barrier systems used in federal and high-security environments. This role requires deep knowledge of electrical control systems, hydraulic assemblies, PLC/relay logic, sensor packages, and access control device integration. The technician must be capable of working independently in the field, responding to urgent service requests, performing routine maintenance, and delivering high-quality repairs. This position requires extensive travel across DC, MD, VA, PA, and NY for emergency service calls, scheduled PMs, and project support. Key Responsibilities Barrier & ACP Equipment Support • Inspect, troubleshoot, and repair:, • Delta Scientific wedge barriers, bollards, barricades, • ACP booth control systems and safety interlocks, • Crash-rated wedge and pop-up barriers, • Sliding and swinging gate actuators, • Hydraulic power units (HPUs), pumps, cylinders, valves, • Diagnose issues involving:, • Limit switches, relays, and proximity sensors, • Loop detectors, photo-eye sensors, and safety devices, • Hydraulic leaks, pressure problems, actuator failures, • Open and troubleshoot 24V / 120V control panels efficiently and safely., • Diagnose faults involving:, • PLCs, relay logic, I/O modules, • Power supplies, fusing, surge suppression, • Timer relays, contactors, and transformers, • Access control integration (card readers, crash bars, intercoms), • Read and interpret:, • Electrical schematics, • Wiring diagrams, • Hydraulic circuit schematics, • Perform scheduled PM on wedge barriers, bollards, booth controls, and HPUs., • Appropriately lubricate, adjust, and test all moving and hydraulic components., • Create clear service reports, document part usage, and note long-term recommendations., • 3+ years experience in electro-mechanical, controls, or barrier system troubleshooting., • Strong proficiency in diagnosing hydraulic systems, pumps, valves, and cylinders., • Ability to read and interpret electrical and hydraulic schematics., • Capable of working outdoors in secure and high-traffic ACP environments., • Skilled in using diagnostic tools including multimeters and pressure gauges., • Must be able to travel frequently — travel is mandatory across DC, MD, VA, PA, NY., • Experience with Delta Scientific, B&B ARMR, Nasatka, or other crash-rated barrier systems., • Familiarity with PLCs (Allen-Bradley, Siemens LOGO, IDEC, or similar)., • Experience with government, DoD, or federal secure-site work., • Competitive compensation based on experience, • Travel reimbursement & per diem, • Training on advanced barrier and control systems, • Advancement opportunities in a high-demand specialty, • Work supporting mission-critical federal security operations

Job DescriptionDescription: Job Type Full-time West Point, New York Minimum Requirements: Education: Minimum 4 Year Degree - Bachelor of Science in Mechanical Engineering Actual Field Construction Experience: 10+ years of working in building construction. Direct Hourly Salary: $70/hr. - $80/hr. dependent on education, experience level, skillset and benefit package selected, rates will vary. Daily PPE: Wear standard OSHA hard hat, safety glasses, safety shoes every day during site inspections and oversight services. Position Location: West Point, New York Computer Knowledge: Familiarity with USACE Resident Management System (RMS) software database, Procore, ProjNet, Suretrak, or Ebuilder. Government uses software products such as Excel, Word, Adobe PDFs, Microsoft Projects, and Primavera Scheduling Software, AutoCAD. Program Knowledge: Familiarity USACE EM 385-1-1 and Unified Facilities Criteria (UFC) Requirements & Criteria is a plus. Previous Employment Exposure: US Army, NAVFAC, DOD installations a plus Work Duration: Fulltime. The typical workweek is five (5) days a week, eight (8) hours per day, work in the field 80% of the time, while providing 20% of the time daily reporting to Owner project management team and record management file repository. During field work, PPE must be worn 100% of the time. Day-To-Day Construction Knowledge: Responsible for providing any or all the following representative services over the course of their assignment(s) related to: Mechanical, Electrical, Plumbing, Fire Protection: prepare daily QA reports during mechanical walkdown inspections, perform site surveys, collect existing condition data in the field, documenting QA inspections and observe QC tests, ensure daily Punch Lists are maintained and items are closed out in a timely manner, monitor testing and Inspection 3rd Party Agency activities, interpret construction drawings & specifications, observe and document construction activities with photographs and videos, observe Health and Safety plan conformance, including any lead or asbestos abatement, review and comment on Contractor daily QC reports, prepare meeting minutes, monitor supply chain and procurement deliverables, observe and document startup, turnover and commissioning activities. Other Daily Position Qualifications: • Must possess good written skills for daily inspection reports, and other correspondence between Owner and contractor., • Must possess good oral skills for leadership role and public speaking at meetings, • Must support CLIENT in various other construction related functions such as planning, procurement, estimating, and schedule forecasting., • Must possess good organizational skills for tracking construction management documents (including but not limited to: Project Photographs, Technical Submittals, Contractor and Vendor Shop Drawings, Risk Register, Request for Information, etc.), • Must provide Owner Oversight via walk-downs, QA inspections, generation of open & punch list items, and closeout activities like as-built reviews, O&M reviews, and warranty reviews., • Must function as a liaison between Owner and contractors, assist with resolving conflicts and identifying solutions, • Must perform tasks as quality inspector to maintain conformance with specifications. Crawford Consulting Services, an equal opportunity employer, is a woman-owned small business that provides full-service construction consulting services for commercial, federal government agencies, and private sector organizations on a worldwide basis. We build dynamic teams dedicated to excellence and the pursuit of success. At Crawford, we offer a competitive benefits package including health, dental, and vision insurance, flexible spending plan, life insurance, short/long-term disability, and 401K savings plan with company match. Employment is contingent upon successful completion of a background check. Requirements:

Job DescriptionDescription: Construction Management Staff at West Point, NY. Education: 4 Year Accredited Degree in Construction Management with 10+ years of QA and Construction Management Required Training (must be current): 40hr - HAZWOPER Training/Hazardous Materials1hr - OSHA Competent Person for Excavation, Trenching, and Shoring Training40hr - Radiological/Radiation Protection Training30hr - OSHA 30 Security: Candidate must pass a CLIENT background check to secure proper site clearance and photo ID security badge. Computer Knowledge: USACE Record Management System Software systems currently used at Microsoft Office suite of products (Excel, Word, Adobe) Software products such as Excel, Word, Adobe PDFs, Microsoft Projects, and Primavera Scheduling Software, Revit, and AutoCAD. Program Knowledge: USACE CQM Certified USACE Unified Facility Code, IBC Code, Uniform Compliance Code (UCC), Familiarity with USACE Three Phase Quality Control Process (1st – Preparatory Phase - Prepare by reviewing all documents and requirements, 2nd – Initial Phase - Ensure initial kickoff work is compliant, then 3rd - Followup Phase as independent verification). USACE EM 385-1-1, Unified Facilities Criteria (UFC) Requirements, Uniform Construction Code (UCC), ASCE Standards, & IBC as well as other regulatory requirements or new building codes. Previous Employment Exposure: FEMA, US Army, NAVFAC, DOD, DOE, National Guard installations a plus Work Duration: Fulltime. Normal business hours shall encompass the period of 0700 through 1630, Monday through Friday, except Federal holidays. Work in the field 80% of the time performing Quality Assurance Inspections and Oversight on behalf of the Owner, while providing 20% of the time preparing daily reports, photograph downloading, review of construction related documents (submittals, RFIs, shop drawings) and report out to onsite project management team with any actionable items. Based on work demand, overtime may be necessary and would occur on occasional weekends and during the daytime. Overtime should not exceed 15% of the total hours. Day-To-Day Construction Activities / Knowledge: The Contractor will be assisting in Charrette process, schematic reviews, design reviews and campus master planning efforts. Contractor will be reviewing A/E designs for compliance with USMA Master Plan, DPW's Engineering Planning Standard (EPS), and all other federal and state regulations and codes, including USDOI standards for historic preservation and SHPO consultation. Develop pre-final (or draft) Requests for Proposals (RFPs). The Contractor shall incorporate the scope of work, as-built drawings, sketches, and other appropriate documents provided from the USACE assigned Project Manager in the development of the RFP for user requested changed. Submit comments citing specific deficiencies and referencing correct information upon review of technical submittals from an installation perspective. Deficiencies shall include but are not limited to design flaws, incorrect citations, grammar, calculation errors, incorrect / missing procedures, and compliance to the construction contract and the relevant codes including federal and state regulations and West Point standards. Submit reports documenting compliance inspections. Inspections shall be performed to ensure compliance with installation requirements, applicable federal, state, and local regulations. Reports shall include but not limited to descriptions of observed tests, defects in structure, envelope, concrete, mechanical, electrical, plumbing, fire protection, fire alarm, and site work. Responsible for providing any or all the following representative services over the course of their assignment(s) related to Site / Civil construction: prepare daily QA reports and submit to Owner at the end of shift, take progress photos of installation work, perform site surveys to avoid potential conflicts, collect existing measurement data in the field, documenting QA inspections performed as each observation, and observe Contractor QC testing, ensure daily punch lists are maintained and items are closed out in a timely manner, monitor testing and Inspection 3rd Party Agency activities and Commissioning Agents, interpret construction drawings & specifications, observe Health and Safety plan conformance, review Contractor daily QC reports for compliance with contract documents, prepare meeting minutes as necessary, monitor supply chain and procurement equipment and material deliverables, observe and document startup, turnover and commissioning activities. • Sound understanding of the overall supervision of construction operations. Sound understanding of engineering concepts, principles, and practices applicable to construction., • In conjunction with the Engineering Technician (ET), review Activity Hazard Analyses (AHAs) and ensure these are discussed by the construction contractor and their respective subcontractors prior to beginning each work activity or when a new work crew is to perform the work in accordance with the three phases of QC., • Capable of communicating at multiple levels of authority to obtain decisive action from all affected parties, including the Construction Contractor (Contractor), Supported Commands, and other Agencies., • Reviews pre-final contract drawings and specifications (including technical RFPs) with respect to constructability and compatibility with actual field conditions., • Participate in pre-award contract meetings, such as Functional Analysis Concept Development (FACDs) meetings and constructability reviews., • Coordinating post-award contract meetings, such as post-award kickoff meetings (as applicable), preconstruction conferences, partnering meetings, schedule acceptance meeting, design review meetings (as applicable and final inspections., • Review of contractor administrative submittals, such as schedules, environmental plan; design (as applicable) and construction quality control plan; health and safety plan; and accident prevention plan and shop drawings., • Visit construction sites to monitor progress and solicit input from the Engineering Technician/Quality Assurance (ET/QA) representatives, review CQC reports and attend QC meetings., • Must possess good written skills for daily inspection reports, and other correspondence between Owner and contractor., • Must possess good oral skills for leadership role and public speaking at meetings., • Must support CLIENT in various other construction related functions such as planning, procurement, estimating, and schedule forecasting., • Must possess good organizational skills for tracking construction management documents (including but not limited to: Project Photographs, Technical Submittals, Contractor and Vendor Shop Drawings, Risk Register, Request for Information, etc.)., • Must provide Owner Oversight via walk-downs, QA inspections, generation of open & punch list items, and closeout activities like as-built reviews, O&M reviews, and warranty reviews., • Must function as a liaison between Owner and contractors, assist with resolving conflicts and identifying solutions., • Must perform tasks as quality inspector to maintain conformance with specifications.

Job DescriptionAbout E-J The E-J Group is active in all facets of electrical contracting, bringing experience, expertise, and a national reputation to projects that range in size up to more than $300 million. With over 4,000 employees across 31 offices, E-J delivers full-service electrical solutions for rail systems, transit facilities, office buildings, hospitals, power, renewable energy, clean energy, co-generation facilities, roadway and outdoor specialty work, airports, industrial facilities, data centers, chip plants, universities, sports stadiums, extra high voltage distribution, utility, and gas infrastructure. At E-J, three generations of family expertise have built an organization that combines practical knowledge with modern technological innovation, providing rapid and efficient solutions for today’s lighting, power, energy, and communication needs. E-J has over a 127-year reputation for integrity, quality, and exceptional service in the electrical field. To learn more, visit . Title/Role: Jr. Estimator Division: Hudson Valley Location: Newburgh, NY Reporting to: General Manager Position Summary: E-J’s Junior Estimators are crucial in the pre-construction phase, providing accurate and competitive cost estimates for electrical projects across various industries. Your experience in estimating and pricing will help drive successful project bids to ensure the company’s continued growth and success in the dynamic Long Island market. Roles and Responsibilities: • Review and analyze project plans & drawings, specifications, and other relevant documents to comprehensively understand the scope of work and project requirements, • Assist in preparing detailed and accurate cost estimates for electrical projects, encompassing labor, materials, equipment, subcontractor services, and other associated expenses, • Utilize industry-standard software and tools (McCormick, Bluebeam) to generate estimates, ensuring precision and consistency in the estimation process, • Account for factors such as market conditions, labor rates, and material costs, • Collaborate with the bid team to develop comprehensive bid proposals, ensuring compliance with client requirements and specifications, • Participate in bid meetings/leveling meetings and presentations, providing insights into the estimation process and the rationale behind pricing decisions, • Solicit and evaluate quotes from suppliers and subcontractors to secure competitive pricing for materials and services, • Develop and maintain strong relationships with vendors and subcontractors to get pricing and information back quicker and quality resources, • Stay updated with industry trends, advancements, and regulatory changes that may impact project costs or estimating techniques, • Share insights and best practices with the team to enhance overall estimating capabilitiesQualifications:, • Bachelor’s degree in electrical engineering, construction management, or a related field preferred, • 1-3 years experience preferred, • Knowledge of electrical construction practices, materials, and methodologies, • Familiarity with industry-standard estimating software and tools (McCormick, Bluebeam), • Excellent analytical and mathematical skills with keen attention to detail, • Effective communication and interpersonal abilities to collaborate with internal teams, clients, vendors, and subcontractors, • Highly motivated team player, • Excellent communication skills, • Proficient in MS Office Suite and Outlook softwareAdvantages of Working at E-J:, • Leading Electrical Contracting Organization Nationwide, • Oldest Family-Owned and Operated Electric Contractor since 1899, • Job training and mentorship, • Competitive compensation packages, • Comprehensive benefits, including medical, dental, and 401K plan, • Paid holidays and vacation, • Merit-Based Bonus, • Tuition Reimbursement ProgramSalary Range: $60k-$80k/year The E-J Group is an Equal Employment Opportunity Employer and ensures equal employment opportunity for all persons without discrimination on the basis of race, color, religion, sex, sexual orientation, national origin, age, disability, marital status, citizenship, or any other characteristic protected by law Powered by JazzHR aqH1x8lo7d

Job DescriptionAbout E-J The E-J Group is active in all facets of electrical contracting, bringing experience, expertise, and a national reputation to projects that range in size up to more than $300 million. With over 4,000 employees across 31 offices, E-J delivers full-service electrical solutions for rail systems, transit facilities, office buildings, hospitals, power, renewable energy, clean energy, co-generation facilities, roadway and outdoor specialty work, airports, industrial facilities, data centers, chip plants, universities, sports stadiums, extra high voltage distribution, utility, and gas infrastructure. At E-J, three generations of family expertise have built an organization that combines practical knowledge with modern technological innovation, providing rapid and efficient solutions for today’s lighting, power, energy, and communication needs. E-J has over a 125-year reputation for integrity, quality, and exceptional service in the electrical field. To learn more, visit . Title/Role: Assist. Project Manager Division: Hudson Valley Location: Newburgh, NY Reporting to: General Manager Position Summary: The Assistant Project Manager is responsible for assisting the assigned Project Manager in the planning, management direction, project completion, client satisfaction, and financial outcome of assigned construction projects. Responsibilities: • Provide assistance in the management of various vendors and subcontractors, • Maintain extensive client contact, • Ensure project documentation is compliant with industry and project standards and company policies, • Estimating additional scopes of work, • Ability to assist project team members in using the required software and tools, • Liaise with field supervision, • Layout/design and manage drawings and documents in Procore and other software, • Attend project meetings, • Maintain accurate project documentation, including progress reports, change orders, and project closeout documentsWhat You’ll Do:, • Minimum of 1-3 years of project manager experience required, • Bachelor's degree or equivalent work experience in electrical contracting/engineering space, • Strong organizational & multi-tasking skills with attention to detail, • Practical knowledge of construction, • Strong business acumen in project planning and management, • Excellent written and verbal communication skills, • Proficiency in project management software (ex: Procore) and the Microsoft Suite, • Practical knowledge of construction processes, • Renewables experience a plus but not required, • Ability to travel to jobsites locallyAdvantages of Working at E-J:, • Leading Electrical Contracting Organization Nationwide, • Oldest Family-Owned and Operated Electric Contractor since 1899, • Job training and mentorship, • Competitive compensation packages, • Comprehensive benefits, including medical, dental, and 401K plan, • Paid holidays and vacation, • Merit-Based Bonus, • Tuition Reimbursement ProgramSalary Range: $65k-$80k/year The E-J Group is an Equal Employment Opportunity Employer and ensures equal employment opportunity for all persons without discrimination on the basis of race, color, religion, sex, sexual orientation, national origin, age, disability, marital status, citizenship, or any other characteristic protected by law. Powered by JazzHR dG5L6zAaYk

Job Description At Brightcore Energy, we specialize in turn-key solutions that simplify the clean energy journey for large commercial and industrial clients. Whether it's cutting-edge geothermal systems, solar, energy storage, or smart building technologies, we bring expertise, innovation, and a seamless approach to every phase of a project – from planning and design to implementation and ongoing support – thereby streamlining project timelines, reducing costs, and eliminating scope gaps. Summary/Primary Role: This role will have expertise in small engines, gasoline engines, and hydraulic systems to join our team. This role requires a Class A CDL, managerial experience, and the flexibility to work both in the field and at our home shop in Rock Tavern, NY. The ideal candidate will have a strong mechanical background, leadership skills, and a willingness to travel as needed. Principal Duties & Responsibilities: (Management may amend or assign duties and responsibilities to this job at any time) • Diagnose, repair, and maintain diesel and gasoline engines, including small engines and hydraulic systems., • Perform preventive maintenance and troubleshooting on a variety of equipment, ensuring optimal performance., • Operate and maintain service trucks and equipment necessary for field repairs., • Supervise and manage a team of mechanics or field technicians when required., • Ensure compliance with DOT regulations and maintain accurate service records., • Travel to job sites for on-site repairs and field service support., • Work collaboratively with team members to improve workflow and efficiency., • Active CDL A Class strongly required., • Minimum 5 years of hands-on experience in diesel, gasoline, and small engine repair., • Strong knowledge of hydraulic systems, electrical diagnostics, and welding/fabrication is a plus., • Experience in managing a team or leading a shop/field service crew., • Willingness to travel for fieldwork as necessary., • Must reside within 40 miles of Rock Tavern, NY., • Ability to work independently and in a team environment. This position does not have supervisory responsibility. Expected Hours of Work: An Employee is expected to work a minimum of forty (40) hours per week. Non-exempt employees are eligible for overtime pay in accordance with applicable wage and hour laws, while exempt employees may be required to work additional hours as necessary to fulfill their job responsibilities. Overtime requirements will be determined based on the operational needs of the organization. The salary range and/or hourly rate listed is a good faith determination of potential base compensation that may be offered to a successful applicant for this position at the time of this job advertisement and may be modified in the future. When determining an employee's base salary and/or rate, several factors may be considered as applicable (e.g., location, specialty, years of relevant experience, education, credentials, and internal equity). Brightcore also offers a comprehensive set of benefits to compliment the salary. The hourly hiring range for this position is $48.00-$54.00 and there is eligibility for overtime for all hours worked over 40 hours per week. Travel Requirements: • Work site setting. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Brightcore Energy is committed to a safe workplace free of drugs and alcohol. All Brightcore Energy positions require a pre-employment background check that includes prior employment verifications, a criminal history check, and a pre-employment drug screen. In accordance with DOT regulations (49 CFR § 40.25), Brightcore Energy is required to obtain prior drug and alcohol testing records for applicants/employees intending to perform safety-sensitive duties for covered Department of Transportation positions. If an applicant/employee refuses to provide written consent for Brightcore Energy to obtain these records, the individual will not be permitted to perform safety-sensitive functions. Office/Remote/Field Work: We offer a variety of structured work arrangements, including remote, hybrid, and field-based assignments, aligned with organizational needs and role-specific requirements. Work arrangements are role-dependent, with guidelines established based on position requirements and business needs. This policy is subject to change at Brightcore's discretion. Brightcore Health Benefits Overview: Brightcore offers a full slate of medical, dental, and vision benefits including options to enroll in a Flexible Spending Account (FSA) and a Health Savings Account (HSA). 401k Plan: Brightcore currently offers both traditional and Roth 401k plans with a dollar-for-dollar match of up to 3% of contributions and $0.50 on the next 2% for a total potential match of 4% annually. Other Benefits & Perks: • PTO, • Financial Wellness Benefits, • Benefit Concierge Program through Health Advocate, • EAP - Employee Assistance Program, • Disability, Life, & AD&D Benefits Brightcore Energy is an Equal Opportunity Employer, providing equal employment and advancement opportunities to all individuals. We recruit, hire and promote into all job levels the most qualified applicants without regard to race, color, creed, national origin, religion, sex (including pregnancy), parental status, age, disability, genetic information, citizenship status, veteran status, gender identity or expression, transgender status, sexual orientation, marital, family or partnership status, political affiliation or activities, military service, domestic violence victim status, sexual or reproductive health decisions, caregiver status, traits historically associated with race, including but not limited to hair texture and protective hairstyles or any other status protected under applicable federal, state and local laws. Brightcore Energy is committed to providing equal employment opportunities to all aspects of employment, including job assignment and compensation. We respect the laws enforced by the EEOC and are dedicated to going above and beyond in fostering diversity across our company. This job description provides a general overview of the expectations and basic duties of the job and is not a comprehensive list of all duties and responsibilities. Brightcore Energy will assign additional duties and tasks that it deems necessary to meet the requirements of the position. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job DescriptionDescription: Education: Bachelor of Science Civil Engineering - 4 Year Accredited Degree or Construction Management Field Experience: 5-10 years onsite Quality Assurance duties as Owner Oversight. Experienced with site/civil construction projects as well as new and renovated improvement projects. Civil work relating to underground utility installation (power, water, electrical, communications), road construction, stormwater culverts and inlets, drainage ditches, pedestrian, and vehicle bridges, spread foundations, caissons, general vertical building construction, structural reinforcement walls, structural beams, concrete walls, tilt-up construction, roof and gutter inspections, and hardscaping/landscaping. Required Training (must be current): 40hr - HAZWOPER Training/Hazardous Materials1hr - OSHA Competent Person for Excavation, Trenching, and Shoring Training40hr - Radiological/Radiation Protection Training30hr - OSHA 30 Security: Candidate must pass a CLIENT background check to secure proper site clearance and photo ID security badge. Computer Knowledge: Familiarity with USACE Three Phase Quality Control Process (1st – Preparatory Phase - Prepare by reviewing all documents and requirements, 2nd – Initial Phase - Ensure initial kickoff work is compliant, then 3rd - Follow-up Phase as independent verification). Familiarity with USACE Resident Management System (RMS) software database, Procore, ProjNet, Suretrak, or Ebuilder. Software products such as Excel, Word, Adobe PDFs, Microsoft Projects, and Primavera Scheduling Software, Revit, and AutoCAD. Program Policy Knowledge: USACE EM 385-1-1, Unified Facilities Criteria (UFC) Requirements, Uniform Construction Code (UCC), ASCE Standards, & IBC as well as other regulatory requirements or new building codes. Previous Employment Exposure: FEMA, US Army, NAVFAC, DOD, DOE, National Guard installations a plus. Work Shift Durations: 5-7 days a week, 8-10 hours per day, work in the field 80% of the time performing Quality Assurance Inspections and Oversight on behalf of the Owner, while providing 20% of the time preparing daily reports, photograph downloading, review of construction related documents (submittals, RFIs, shop drawings) and report out to onsite project management team with any actionable items. Overtime may occur on limited basis but must be approved in writing by CLIENT prior to start. Day-To-Day Construction Knowledge: Responsible for providing any or all the following representative services over the course of their assignment(s) related to Site / Civil construction: prepare daily QA reports and submit to Owner at the end of shift, take progress photos of installation work, perform site surveys to avoid potential conflicts, collect existing measurement data in the field, documenting QA inspections performed as each observation, and observe Contractor QC testing, ensure daily punch lists are maintained and items are closed out in a timely manner, monitor testing and Inspection 3rd Party Agency activities and Commissioning Agents, interpret construction drawings & specifications, observe Health and Safety plan conformance, review Contractor daily QC reports for compliance with contract documents, prepare meeting minutes as necessary, monitor supply chain and procurement equipment and material deliverables, observe and document startup, turnover and commissioning activities. Other Daily Qualifications: • Must possess good written skills for daily inspection reports, and correspondence between Owner and Contractor., • Must possess good oral skills for leadership role and public speaking at meetings., • Must possess good organizational skills for tracking construction management documents (including but not limited to: Project Photographs, Technical Submittals, Contractor and Vendor Shop Drawings, Risk Register, Request for Information, etc.), • Must provide onsite daily walkdowns, QA inspections, generation of open list items, and closeout activities., • Must function as liaison between Owner and contractors, assist with resolving conflicts and identifying solutions., • Must perform tasks as quality inspector to maintain conformance with specifications. Employment is contingent upon successful completion of a background check. Requirements:

Job Description Job Type: Full-Time Schedule: Monday-Friday Location: 17 Dickson St # 23, Newburgh, NY 12550 Hours: Full-time Pay Range: Starting at 28.00 depending on experience. Come join our team! As a fleet mechanic, you will perform complex operations including engine, electrical, fuel, brake, and exhaust repairs on small and large commercial vehicles. Following OEM and other standards, you will perform thorough preventive maintenance inspections, along with roadside and emergency service repairs, among other duties. Candidates must have accreditation from a school or certification program, proven experience, and be able to pass a background check. Read more to apply! Responsibilities: • Perform thorough, accurate preventative maintenance inspections., • Following schedules, complete all required maintenance operations including lubrication, fluid changes, brake adjustments, and tire rotation., • With direction from the Fleet Maintenance Supervisor, performs unscheduled maintenance as needed., • Performs complex operations including engine, electrical, fuel, brake, and exhaust repairs and field tests. This requires interpreting and working from drawings, specifications, and other technical materials., • Perform emergency roadside services as needed., • Inspection of equipment and diagnose mechanical defects., • Document repairs and parts on work orders completely and accurately, • Maintain tools and workplaces so that conditions are neat and orderly., • Performs other duties as required., • Emergency conditions may require on call service calls, extended hours, or weekend work flexibility., • May, on occasion, be required to drive vans, buses, and vehicles to perform road tests etc. 2+ year(s) experience an automotive mechanic preferred. Accreditation from a school or certification program preferred. Complete all training requirements. Pass Pre employment screenings. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. STA is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants; returning military are strongly encouraged to apply. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or other legally protected status, or any other classification protected by federal, state, or local law.

Job Description Full-Time | On-Site | Newburgh, NY Overview Perreca Electric Co., Inc. is seeking an experienced Electrical Project Manager to prepare estimates, provide preconstruction services, and manage electrical construction projects from award through final close-out for commercial, industrial, and mission-critical projects throughout the Hudson Valley. The ideal candidate will be capable of managing project costs, schedules, field operations, and client relationships while coordinating with clients, engineers, and field teams throughout the project lifecycle. Responsibilities – Preconstruction & Estimating · Prepare electrical budgets and estimates for new opportunities · Perform takeoffs, scope reviews, and value engineering · Work with vendors and subcontractors to obtain accurate pricing · Support bid submissions and preconstruction deliverables · Participate in design coordination with clients, engineers, and design teams · Assist with budgeting, planning, and preconstruction services for design-build/assist and negotiated projects Responsibilities – Project Management · Manage electrical construction projects from $5M to $30M+ · Transition from estimating into full project management upon award · Lead coordination with General Contractors, clients, engineers, other trades, and vendors · Oversee schedules, manpower planning, procurement, and logistics · Manage submittals, RFIs, ASIs, change directives, and design updates · Support field supervisors to maintain productivity, quality, and safety · Champion Perreca’s safety culture on every project · Conduct project meetings and maintain project documentation Responsibilities – Financial & Contract Administration · Build and track project budgets and cost-to-complete updates · Identify, price, and negotiate change orders · Manage billing, invoicing, and project financial reporting · Oversee punch lists, as-builts, O&M manuals, and project close-out documentation Qualifications · 7+ years of electrical construction project management experience · Experience managing commercial, industrial, or mission-critical electrical construction projects valued at $5M–$30M+ · Experience managing union labor and field manpower · Strong ability to read electrical drawings, specifications, and contract documents · Experience preparing budgets and estimates · Experience with preconstruction budgeting, design coordination, and design-build project delivery · Strong communication and client relationship skills · Electrical contractor experience preferred Technical Requirements · Proficient in Microsoft 365, including Outlook, Excel, Word, Teams, and Project · Strong working knowledge of AutoCAD · Experience with Navisworks and Bluebeam · Proficiency in ConEst or similar estimating software · Revit experience is a plus Why Work for Perreca · Serving the Hudson Valley since 1949 · Strong reputation and long-standing client relationships · Hands-on, supportive leadership team · High-profile projects including data centers, industrial facilities, semiconductor, healthcare, and commercial construction · Professional, team-focused culture built on quality, safety, and accountability · Competitive compensation and benefits · A role where your work directly impacts project success and client satisfaction Benefits · Competitive salary ($110,000 – $155,000, based on experience) · Health insurance · 401(k) and Profit Sharing · Paid time off and holidays · Ongoing training and development opportunities Additional Requirements · Ability to report to Perreca’s main office in Newburgh, NY and travel to project sites throughout the Hudson Valley as required · Work Location: In person

Job Description Kia Retailers are offering skilled and experienced military Veterans with the opportunity to begin an inspiring career as a Kia Certified Service Technician. To support this Kia Retailer initiative, Kia America, Inc. has established the Kia Veterans Technician Apprenticeship Program (VTAP). Job Description • Diagnose, maintain, and repair Kia vehicles including engine, transmission, steering, suspension, brakes, HVAC, and electrical components, • Complete repair orders and warranty request orders in accordance with established Kia and Retailer policies and procedures, • Test drive vehicles, and analyze, diagnose, and repair components and systems using Kia diagnostic strategies, special equipment, and tools KUS and ERS make no warranties (expressed or implied) or guarantees of employment to any individual seeking to participate in the Kia Veteran Technician Apprenticeship Program (VTAP). All employment decisions are at the discretion of the specific Kia Retailer to which an employment application is made, conditional upon meeting eligibility, skill, and experience requirements to participate in VTAP. Requirements Qualifications • Honorable Discharge, • Valid Drivers License from any state with a clean driving record, • Experience in a technical / mechanical field is required Kia VTAP Apprenticeship Highlights: • Full-time employment with a participating Kia Retailer, • A program designed specifically for Veterans facilitated by Veterans!, • Participation in a one-year competency-based GI Bill approved apprenticeship leading to Kia Service Technician certification, • Access to all tools, equipment, vehicles, and training needed to complete the apprenticeship and certification process, • Eligible Veterans may apply for and receive a substantial GI Bill© Monthly Housing Allowance (MHA) during their apprenticeship

Job Description We are seeking a motivated Junior Sales Engineer to join our growing Building Automation System team. This role is ideal for someone looking to build a career in HVAC controls, energy management, and smart building technology. Responsibilities • Support sales effort for BAS and HVAC controls projects, • Develop relationships with contractors, facility managers, and end users, • Learn system applications including HVAC controls, integration, and energy solutions Qualifications • Technical aptitude with HVAC, electrical, or mechanical systems, • Strong communication and organizational skills, • Degree or experience in engineering, HVAC, controls, or related field preferred Compensation & Benefits • Salary range: $45,000 - $55,000 based on experience, • Commission opportunities, • Hands-on industry training, • Career growth in a fasr growing smart building industry If you are driven, technically minded, and insterested in building automation technology, we'd like to hear from you.

Job DescriptionDescription: Are you a skilled mechanic or technician looking to take your career to the next level? Kinsley Power Systems is hiring Field Service Technicians to service stand-by generators throughout the Northeast. If you have experience with engines, electrical systems, or heavy equipment—especially in automotive, trucking, marine, or construction—you may already have what it takes to thrive in this role. We offer specialized training to help you transition into the power generation industry and build a long-term, rewarding career. Kinsley Power Systems, a family-owned business, has been a trusted leader in generator service, sales, and rentals for over 60 years. We’re committed to exceeding customer expectations in a workplace that’s both enjoyable and supportive—where your hard work is recognized and your growth is prioritized. Key Responsibilities and Preferred Experience: • Performing preventative maintenance and repairs on standby generator systems (Ranging from 8kW-1mW), • Troubleshooting, diagnostic testing, load-bank testing and start-ups on generators, • Preparing accurate quotes for repairs and completing/submitting work orders, • Previous experience working on residential or industrial generators, • Exceptional communication and customer service skills, • The ability to participate in an on call, rotating schedule, • Must provide your own tools (multi-meter, hand-tools, etc.), • Very safety focused with an OSHA 10 (or the ability to attain one), • Valid DOT Card (or the ability to attain one) and a valid driver’s license Benefits: • Competitive pay and PTO to keep your work-life balance in check, • Full health benefits package (Medical, Dental, Vision, etc.) + 401(k) with match, • Company-paid certifications and specialized training to grow your skills, • Company vehicle and gas card so you’re always ready to roll, • Uniforms provided, plus annual boot and uniform stipends, • Real advancement opportunities—grow your career with a team that wants to see you succeed, • A chance to work alongside some of the best technicians in the industry in a company that feels like family All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or national origin. Requirements:

Job Description Senior Project Manager – Construction About the Company Since 1994, our firm has been a trusted full‑service design-build contractor serving residential and commercial clients throughout the Hudson Valley. We specialize in custom homes, high‑end renovations, commercial construction, and restoration projects. Our reputation is built on craftsmanship, integrity, and long‑standing client relationships. As we continue to grow, we are seeking an experienced Senior Project Manager who is ready to lead complex projects with confidence and precision. Position Overview The Senior Project Manager oversees multiple residential and commercial construction projects from preconstruction through closeout. This role is ideal for a hands‑on leader who excels in budgeting, scheduling, team coordination, and client communication. You will manage a diverse portfolio of work while upholding the highest standards of quality, safety, and client satisfaction. Key Responsibilities • Lead multiple construction projects from concept and estimating through final delivery and closeout., • Manage project budgets, forecasts, schedules, contracts, change orders, and cost controls to ensure profitability and timely completion., • Serve as the primary point of contact for clients, architects, engineers, inspectors, and subcontractors., • Conduct project kickoff meetings, progress meetings, and on‑site coordination to keep all stakeholders aligned., • Review drawings, specifications, and scopes of work to identify risks, constructability issues, and cost‑saving opportunities., • Ensure compliance with building codes, safety regulations, and company quality standards., • Oversee procurement of materials, subcontractors, and long‑lead items to support project schedules., • Mentor and support Project Managers, Superintendents, and field staff to strengthen team performance and professional growth., • Maintain accurate project documentation, including reports, logs, billing schedules, and administrative records., • Minimum of 8 years of construction project management experience., • Proven success managing residential and/or commercial construction projects., • Strong understanding of construction means and methods, sequencing, and scheduling., • Expertise in budgeting, forecasting, and cost control., • Ability to manage multiple stakeholders and maintain strong client relationships., • Proficiency with construction management software and Microsoft Office., • Experience with design‑build project delivery., • Familiarity with construction in the Hudson Valley or New York State., • OSHA certification., • Bachelor’s degree in Construction Management, Engineering, or a related field., • Background working with general contractors., • Hands‑on experience with preconstruction planning and estimating., • Strong experience in both residential and commercial environments., • Proficiency with project scheduling tools and methodologies. This role blends office‑based planning with on‑site project management across residential and commercial job sites throughout the Hudson Valley. You will collaborate closely with leadership, project teams, subcontractors, and design professionals in a supportive, team‑oriented environment. Our culture emphasizes craftsmanship, professionalism, safety, and delivering projects on time and on budget. You will have the opportunity to manage projects from start to finish, not just a single phase. Compensation and benefits are competitive and commensurate with experience. Job Type & Location This is a Contract to Hire position based out of Fishkill, NY. Pay and Benefits The pay range for this position is $150000.00 - $200000.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.

Job DescriptionAbout E-J The E-J Group is active in all facets of electrical contracting, bringing experience, expertise, and a national reputation to projects that range in size up to more than $300 million. With over 4,000 employees across 31 offices, E-J delivers full-service electrical solutions for rail systems, transit facilities, office buildings, hospitals, power, renewable energy, clean energy, co-generation facilities, roadway and outdoor specialty work, airports, industrial facilities, data centers, chip plants, universities, sports stadiums, extra high voltage distribution, utility, and gas infrastructure. At E-J, three generations of family expertise have built an organization that combines practical knowledge with modern technological innovation, providing rapid and efficient solutions for today’s lighting, power, energy, and communication needs. E-J has over a 125-year reputation for integrity, quality, and exceptional service in the electrical field. To learn more, visit . Title/Role: Project Manager Division: Hudson Valley Location: Newburgh, NY Reporting to: Operations Manager Position Summary: We are seeking a skilled and experienced Electrical Project Manager to join our team. The ideal candidate will oversee and coordinate projects, ensuring they are completed on time, within budget, and in compliance with E-J's safety regulations and quality standards. Responsibilities include planning, monitoring progress, and providing updates to stakeholders, clients, and team members. As a Project Manager at E-J, you will collaborate with diverse teams, communicate effectively with clients, subcontractors, and vendors, and play a key role in delivering successful electrical projects for our valued clients. What You’ll Do: • Create and manage project schedules, milestones, and deliverables to ensure timely project completion, • Provide regular project updates to clients and stakeholders, informing them of project status, risks, and milestones, • Liaise with field supervision, • Attend and run project meetings, • Maintain accurate project documentation, including progress reports, change orders, and project closeout documents, • Estimating, • Address any project-related issues, conflicts, or delays promptly and effectively, seeking solutions that maintain project progress, • Develop comprehensive project budgets, monitor costs, and implement cost-saving measures when possible, • Procure and coordinate necessary materials, equipment, and subcontractors for each project, • Identify areas of process improvement and implement best practices to enhance project efficiency and profitabilityQualifications:, • Minimum of 5 years of project manager experience required, • Proficiency in Microsoft Suite in addition to project management software; E-J currently uses Procore, Emque, Riskcast, Toric, and more, • Bachelor's degree or equivalent work experience in the electrical contracting/engineering space, • Strong organizational & multi-tasking skills with attention to detail, • Practical knowledge of construction, • Strong business acumen in project planning and management, • Excellent written and verbal communication skills, • Practical knowledge of construction processesAdvantages of Working at E-J:, • Leading Electrical Contracting Organization Nationwide, • Oldest Family-Owned and Operated Electric Contractor since 1899, • Job training and mentorship, • Competitive compensation packages, • Comprehensive benefits, including medical, dental, and 401K plan, • Paid holidays and vacation, • Merit-Based Bonus, • Tuition Reimbursement ProgramSalary Range: $85k-$115k/year The E-J Group is an Equal Employment Opportunity Employer and ensures equal employment opportunity for all persons without discrimination on the basis of race, color, religion, sex, sexual orientation, national origin, age, disability, marital status, citizenship, or any other characteristic protected by law. Powered by JazzHR iesxbvi2kW

Required Combination of Knowledge and Skill Bachelors degree from an accredited college or university in a related technical, engineering or science field; or Masters degree from an accredited college or university in a related technical, engineering or science field. At the conclusion of qualificat

Enlist under the Advanced Electronics and Computer Field program, with final placement into the Electronics Technician or Fire Controlman rating during initial training at Great Lakes, based on performance and Navy needs; maintain AECF eligibility throughout training in order to retain any accelerat

Qualifications 5+ years of construction project management experience Bachelor’s degree in construction management, civil engineering, or a related field preferred Strong leadership, organizational, and communication skills Proficiency with MS Excel and project documentation Detail-oriented with t

Troubleshoot Electrical Issues: Diagnose and resolve electrical problems using specialized tools such as voltmeters and ammeters. Install and Maintain Electrical Systems: Perform installations, maintenance, and repairs of electrical systems, including wiring, outlets, and controls, ensuring complian

If you're seeking to make an impact from the start of your career, spark impressive change, learn new or innovative skills, and most importantly, gain success in a field that rewards ambitious hard workers, a Smart Home Integration opportunity is for you!.

Nesco Resource - - Responsibilities: Perform hand assembly of sub-systems and components; Read, interpret, and follow Standard Operating Procedures (SOPs) and assembly instructions; Operate manual hand tools and power tools for assembly and validation tasks; Use material handling equipment, includi

Leverage our career self-progression plan to move from Field Technician I to Field Technician IV, with 10% increases for each progression level and bonus payments for completing course work. No two days are the same in the field. Field Technicians can also earn an industry recognized certification.

Lead diagnosis and repair of complex mechanical, hydraulic, pneumatic, and limited electrical issues.

Our Industrial Electrician is responsible for installing, programming, troubleshooting, and maintaining automated industrial control systems, bridging electrical wiring with software logic. You will ensure maximum uptime of machinery by diagnosing failures, updating PLC/HMI programs, and repairing e

Diagnose and repair mechanical, hydraulic, pneumatic, and basic electrical issues.

Leverage our career self-progression plan to move from Field Technician I to Field Technician IV, with 10% increases for each progression level and bonus payments for completing course work. Field Technicians can also earn an industry recognized certification. Working Conditions Our Field Technician

M - - Responsibilities: Work with analog and digital AC/DC drive systems and HMIs; Create, read, modify, or update electrical diagrams (PLC logic, P&ID, etc. Operate electrical test equipment (oscilloscopes, digital multimeters, meggers, chart recorders); Improve manufacturing processes by working

Plumbing Service Technician (Residential).Immediate openings! Earn an hourly base plus commission, with strong growth potential for high performers.Looking to pipe up your career with a company that knows how to keep things running smoothly? Folkes Home Services, a trusted name in the Hudson Valley

Key Responsibilities Design and develop electrical schematics using AutoCAD Create power cabinet layouts and specify electrical components Design control systems in accordance with project requirements Maintain and update electrical design documentation and CAD libraries Generate Bills of Material (

Valvoline - - Responsibilities: Perform preventative maintenance tasks on all equipment; Maintains, cleans, stores and safeguards all hand and power tools that are issued; Perform basic electrical tasks such as replacing outlets, light fixtures, light switches, signage lights, outdoor parking lot l

CBRE Government & Defense - 606 Thayer Road - Responsibilities: General maintenance and repairs of installed equipment and systems to include all aspects of plumbing, compressed gas systems, pumps, compressors, blowers, fans and electrical motors; Performs or assists in the performance of the follow

Analyze plant-wide electrical process data to make decisions on equipment maintenance and process improvement activities; Adhere to plant safety and sanitation requirements; complete assigned work safely and efficiently per the Standard Operating Procedures (SOP's).

Project Manager Job Summary: Talent Software Services is in search of a Project Manager for a contract position in Melville, NY.The opportunity will be for eight months with a strong chance for a long-term extension.Primary Responsibilities/Accountabilities: Project Methodology in the creation of th

Specialist, Electrical Engineer (Digital Design). Successful candidate will have a strong Analog & Digital Electrical Engineering background and experience to support critical component shortages and other design activities for L3Harris tactical radio products and accessories. Analyzes electrical re

This is a hands-on opportunity working with a diverse mix of advanced manufacturing equipment, offering strong exposure to electrical systems, automation, and mechanical troubleshooting. Diagnose and repair electrical systems, including high-voltage components. Strong electrical troubleshooting and

From toys to t-shirts, console games, books, and more, our team brings our beloved brands and franchises into the lives of families through products and experiences that can be found worldwide, such as the Disney Store e-commerce platform, Disney Parks, local and international retailers, and Disney

Diagnose and perform mechanical, hydraulic, and electrical repairs on:. Basic electrical and hydraulic troubleshooting skills.

Experience troubleshooting facility systems, including HVAC/R, fire alarms, electrical motors, boilers, RO systems, chilled water systems, plumbing systems, and wiring practices.

Associate, Electrical Engineer (FPGA Verification).

With guidance and direction from supervisors, the Associate Project Manager will lead projects of diverse scope requiring an understanding of current business trends, construction techniques, innovative project delivery methods, thorough knowledge of HVAC, electrical, plumbing, fire protection, core

Senior Project Manager – Construction Management.Long Island, NY (projects across Long Island & NYC).Long Island–based construction management and development firm.Manage project schedules, budgets, and resource planning.Act as the primary liaison for clients, consultants, and key stakeholders.C