Electrical supervisor jobs in Hauppauge, New YorkCreate job alerts

Description: Northeast Aero Compressor and PG Aerotech are seeking an experienced Facilities Technician II to help maintain the safe, compliant, and efficient operation of our 55,000 square foot FAA Part 145 certificated repair station and MRO facility in Hauppauge, NY. This is a mid-level, hands-on role for a technician who has moved beyond entry-level building maintenance and is ready to take on greater ownership of preventive maintenance programs, more complex mechanical and electrical troubleshooting, and vendor coordination — while continuing to perform daily hands-on repair and upkeep work. The Facilities Technician II reports to the Production Manager and works closely with them to keep all building systems, ground support equipment, and industrial machinery running reliably. Requirements: • Perform routine and corrective maintenance on HVAC, electrical, plumbing, lighting, and overhead door systems, escalating only the most complex issues to the Facilities Supervisor, • Execute scheduled Preventive Maintenance (PM) tasks and help maintain accurate maintenance logs, service records, and equipment histories in compliance with repair station requirements, • Diagnose and troubleshoot mechanical, electrical, and pneumatic/hydraulic issues on industrial equipment and aviation ground support equipment, • Assist in coordinating third-party vendors and contractors for specialized inspections, certifications, and repairs, • Perform general building maintenance including carpentry, painting, minor structural repairs, and groundskeeping/snow removal as needed, • Conduct routine facility and safety inspections, identify hazards or worn components, and proactively address or report them, • Support the cleanliness and organization of the facility, including production floor, offices, break rooms, restrooms, and grounds, • Help ensure fire and life-safety systems are functioning correctly and are tested/documented on schedule, • Operate company vehicles and material handling equipment (e.g., forklift) to move tools, parts, and supplies between areas or job sites, • Maintain compliance with FAA Part 145 repair station requirements, OSHA regulations, EPA standards, and applicable building codes, • Respond to maintenance requests from building occupants and prioritize/resolve issues promptly Experience and Skills • 2–5 years of experience in building/facilities maintenance, industrial maintenance, or a related mechanical/electrical trade; aviation, manufacturing, or regulated-facility experience preferred, • Working knowledge of HVAC, electrical, and plumbing systems, with demonstrated ability to independently troubleshoot and repair common issues, • Some exposure to industrial equipment such as compressed air systems, generators, or pneumatic/hydraulic equipment preferred, • Comfortable using hand and power tools safely and effectively, with strong mechanical aptitude and problem-solving skills, • Ability to work independently on assigned tasks while collaborating with the Facilities Supervisor on larger projects, • Strong communication and customer service skills when responding to occupant requests, • Ability to pass a pre-employment and random drug and alcohol screening as well as a background check Physical Requirements • Ability to lift at least 50 pounds, • Comfortable working at heights on ladders and lifts, and in confined spaces, outdoor environments, and varying temperatures, • Manual dexterity and ability to constantly manipulate small to medium components, • Ability to stand, walk, bend, and climb stairs for extended periods, • Frequent use of hand tools, power tools, and cleaning/lubricating/painting chemicals Education / Licenses / Certifications • High school diploma or GED required; trade school training or an associate degree in a mechanical, electrical, or facilities-related discipline preferred, • Valid state driver's license with a clean driving record required, • Forklift certification preferred, or ability to obtain within 30 days of hire, • OSHA 10-Hour (or higher) General Industry certification preferred, or willingness to obtain Compensation and Benefits • Full-time, hourly position: $28–$34 per hour, commensurate with experience, skills, and certifications, • This range reflects a mid-level role positioned between our entry-level Facilities Technician/Driver and our Facilities Supervisor, based on current Long Island / Hauppauge, NY market data for facilities and building maintenance technicians, • Medical, dental, vision, and life insurance options, • 401(k) with 100% match on the first 4%, • Paid holidays, vacation, and sick/personal leave accrued from date of hire, • Training/education budget, gym reimbursement, complimentary drinks, company events, and philanthropy opportunities Compensation details: 28-34 Hourly Wage PIdeb52e964200-37820-41065392

EnerSys Advanced Systems (EAS) is a specialized division of EnerSys—a global leader in stored energy solutions for industrial applications. EAS focuses on cutting-edge energy solutions for the aerospace, defense, and medical industries. As we continue to grow, we're looking for individuals who share a passion for these industries and want to be part of an innovative, dynamic team. Certain positions at EnerSys Advanced Systems require access to information or technology that is subject to the International Traffic in Arms Regulations (ITAR) and other U.S. government security regulations. Candidates for these positions should be a "U.S. Person" under ITAR (U.S. citizen, lawful permanent resident, or a refugee/asylee) and/or otherwise comply with ITAR requirements for access rights to be considered for a position. What We Offer: • Generous Time Off – 3+ weeks of paid time off, plus 11 paid holidays, • Comprehensive Benefits – Medical, dental, and vision coverage for employees and dependents at a discounted rate, • Financial & Career Growth – Life insurance, short-term disability, educational reimbursement, flexible spending accounts, and an employee stock purchase plan, • 401(k) Matching – 100% match at a 6% contribution level, • Innovative Culture – We value excellence, teamwork, and long-term relationships with stakeholders, colleagues, and customers. Through innovative technology and ongoing training, we invest in our employees' skills and career development. At EAS, we don't just build batteries – we power systems and devices that protect not only individual citizens but communities across the world. If you're excited about working in an innovative, fast-paced, high-tech environment, where your contributions make a real impact, we'd love to hear from you! Compensation Range: $17.00-$18.00 Learn More About EAS Job Purpose The Assembler II at Bren-Tronics, part of EnerSys and manufacture of advanced power solutions, will be responsible for assembling electronics components accurately according to specifications and quality requirements. Essential Duties and Responsibilities • Assemble/solder batteries, chargers, and accessories by hand, hand tools, simple automatic tools, and automated machines following supervisor's directions and work instructions., • Perform multiple computer-based functional tests or use electrical meter or other simple equipment to obtain functional test readout at the same time., • Precisely apply RTV, epoxy and glue at specified area, apply labels or stamp at specified area on products, and perform meshing and taping on products., • Assemble connector assemblies by crimping medium wires to socket/lug., • Performs various types of soldering including surface mount, thru-hole, and hand-soldering at a proficient level., • Accurately operate automated machines., • Maintain assigned equipment and report damaged equipment; contact supervisor/line leader if supplies are needed., • Clean and inspect assembles and/or sub-assemblies in conformance to manufacturing quality standards and initial products as required., • Performs other related duties as assigned. Qualifications • High School Diploma, • 1+ Experience in Assembling or related work, • Good Hand/Eye Coordination for handling and assembling parts with precision., • Able to work in the production floor and comfortable to encounter electrical and mechanical components. General Job Requirements • Must be able to lift up to 50 pounds/23 kilos on a daily continuous basis. Anything heavier will be done with the assistance of a mechanical device or with the assistance of another employee., • Must be able to frequently bend; twist; reach; stoop; kneel or crouch., • Must be able to stand for long periods of time, • Employees are responsible for wearing the required Personal Protective Equipment in the proper manner at all times., • This position requires working in a plant/warehouse environment. Therefore, expect varying working conditions. EnerSys provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description We are seeking a skilled and detail-oriented Coil Fabricator to join our manufacturing team. In this role, you will be responsible for fabricating, assembling, and testing induction coils used in industrial heating applications. The ideal candidate has a strong mechanical aptitude, experience working with copper tubing, and the ability to interpret technical drawings and specifications. Fabricate induction heating coils using copper tubing, fittings, and specialized components. Key Responsibilities • Form and bend copper tubing by hand and with basic tube-forming tools to match coil geometries specified on engineering drawings., • Wind copper tubing into single- and multi-turn induction coils per drawing dimensions and turn counts., • Read and interpret basic mechanical drawings, work orders, and bills of material (BOM)., • Fit and assemble coil formers, insulation, and mounting hardware as called out on the drawing., • Perform basic dimensional checks and visual inspection of completed coils; flag deviations to supervisor., • Maintain a clean, organized, and safe workstation in accordance with UPT shop practices and ISO 9001 procedures., • Accurately record time, quantities, and work order status in the shop tracking system., • Follow all safety procedures related to torches, compressed gas, hand and power tools, and PPE use.Qualifications, • Mechanical aptitude and experience working in a manufacturing, machining, HVAC, or metal‑fabrication environment, • Ability to read and understand technical drawings and mechanical schematics., • Experience with hand and power tools (tube benders, torches, grinders, drill presses, measurement tools)., • Mechanically inclined with good hand-eye coordination and manual dexterity., • Comfortable working with hand tools; willingness to learn tube bending, winding, and brazing techniques., • Warehouse experience including forklift operation certification is highly desirable., • Familiarity with manufacturing processes, safety procedures, and quality control standards., • Ability to stand, lift, bend, and perform repetitive tasks for extended periods., • Reliable, punctual, and able to work independently or in a team environmentPreferred (Not Required), • Prior experience in metal fabrication, electrical, HVAC/refrigeration, plumbing, or similar hands-on trade., • Exposure to soldering, brazing, or welding., • Experience in a manufacturing or machine shop environment.

Job Description FLSA STATUS: Salary/Exempt DEPARTMENT: Research and Development SUPERVISOR: Engineering Manager DIRECT REPORTS: No Position Summary Power Connector, LLC is entering a new and exciting phase of growth and opportunity filled with innovative and progressive thinking and strategizing. In December 2021, Power Connector was acquired by the Trexon Global network. With this historic transition comes the need to enhance and grow the company through restructuring, reorganization, modernization, optimization, and business development. We, at Power Connector, are responsible for revolutionizing the company and securing and expanding its global connection. Power Connector's Design Engineer is critical in contributing to the fundamental changes that are transforming Power Connector. This position is instrumental in enhancing and strengthening our design capabilities to enable the growth and development of the business by driving innovation and improvements via New Product Introduction and connector design iterations and enhancements. This position's primary focus is to contribute and execute on the team's strategic plans for design innovation and product line sustainability and expansion. Power Connector's Design Engineer is a dynamic, adaptable, open-minded problem solver with exceptional technical and analytical skills. This position plays a key role in sustaining and enhancing our current capabilities and output through strategic planning and engineering to increase efficiency and productivity in all design engineering disciplines. This position enjoys the inherent challenges of sustaining and growing a business by optimizing engineering processes and introducing new approaches to design in a diverse and dynamic organization. This position has a strong influence on the fundamental principles guiding design structure and functionality and works closely with the General Manager to realize the company's true designing potential. Minimum Qualifications Education: • Bachelor's of Science in engineering or related field Experience: • 3-5 years of experience of design engineering or related field, • 2-5 years of electrical connector design experience Knowledge: • Ability to create 3D Computer-aided design (CAD) models and drawings, • Ability to read drawings, specifications, test procedures, etc., • Fundamental mathematical and physical principles, • Proficient in MS Office, • Geometric Dimensioning and Tolerancing (GD&T) Skills: • Good oral and written communication and presentation skills, • Great interpersonal skills, • Excellent organizational skills, • Results-oriented with strong analytical skills, • Ability to work well independently and part of a team, • Ability to motivate team members in a creative and effective manner, • Ability to work effectively under stressful and dynamic environments Job Responsibilities • Assist with research and development, new product introduction, and production deployment., • Create CAD models, drawings, specification sheets, and prototypes for new and existing products utilizing Solidworks., • Modify existing products to improve efficiency and performance., • Design for manufacturability., • Research materials and production costs to determine manufacturing requirements., • Ensure product designs conform to customer and government specifications., • Test designs to ensure they meet safety, usability, and environmental impact standards., • Analyze data from tests and identify opportunities for improvement., • Collaborate with engineering, sales, procurement, and production teams., • Present designs and prototypes to customers and colleagues., • Create BOMs and routings for new products, legacy products, and engineering changes as necessary., • Develop and manage costing analysis as necessary during product development and deployment., • Create part numbers, assign classification, build product structure and Bill of Materials, generate routings, assign standard labor times, etc. for all levels of components and assemblies in current MRP system., • Manage and participate in product design reviews to provide input on design and manufacturing requirements, functional requirements, capacity, potential failure modes, etc., • Manage projects, including budgets, schedules, and costs when applicable., • Perform DFMEAs, PFMEAs, and Risk Assessments., • Ensure that the company's designs and designing processes comply with all government laws and regulations., • Review and calculate labor, material, and other production costs along with reviewing schedules and future production requirements to assist management in decision making., • Collaborate with quality team to assure products are being produced to applicable specifications., • Evaluate quality control processes and make recommendations for improvements in quality control., • Devise procedures to inspect and report quality issues., • Assure the reliability and consistency of product manufacturing by checking processes and final output., • Facilitate proactive solutions by collecting and analyzing manufacturing data., • Document and optimize design procedures to ensure replicability and compliance with internal and external standards., • Contribute to internally driven and customer-driven Root Cause Corrective Actions and failure analysis., • Assist in the preparation for quality audits., • Any additional tasks necessary to execute on the team's strategy for design sustainability, improvement, and optimization. Other responsibilities, initiatives and ad-hoc projects as required. Physical Requirements The physical demands described here are representative of those that must be met to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit for prolonged periods of time, working at a computer, stand, bend, twist, and lift up to 25 lbs. The noise level in the work environment is usually low to moderate.

Job Description General Responsibilities: Perform a variety of inspections on materials, precision machined components and electrical-mechanical assemblies to ensure compliance with requirements. Use a wide assortment of measuring instruments including hand tools and gauges, vision system equipment. Prepare quality documentation for final shipments per customer requirements. Specific Duties: • Ability to use inspection gauging and equipment to ensure conformance to all visual and dimensional drawing requirements. Gauging includes but not limited to; calipers, micrometers bore mics, depth, pin, thread and snap gauging. Operate equipment such as; profilometer, optical comparator, Keyence visual measurement system, height gauge, microscope, smart scope, etc., • Perform incoming and receiving inspection to specified requirements., • Perform inspection of finished details and assemblies to specified requirements., • Enter inspection results into a variety of data collection tools and databases., • Inspection of Soldered and brazed assemblies. Candidate requires internal certification for solder inspection., • Keep accurate records and maintain quality documentation., • Perform inventory movement transactions in the ERP system and ensure traceability of product., • Understand the non-conforming material process to ensure control of material., • Work and communicate with Quality, Supplier Quality, Engineering, and Manufacturing in a clear professional manner., • Write clear material rejection reports that contain problem statements, dimensions, and data., • Retrieve test data from databases and assemble documentation packages to ship with the product., • Use of ERP System in order to retrieve quality requirements and perform tasks related to moving product in system., • Perform tasks as assigned by the Inspection department Supervisor or Quality Manager., • Support the Company Quality Policy, • Generate FAI documentation to supply to customers with shipments as needed. Qualifications: Required Skills • Ability to read, and use micrometers, calipers, heigh gage and other measuring instruments, • Ability to read, and understand engineering drawings and related technical documents, • Working knowledge of Geometric Dimensioning and Tolerance (GD&T) principles and their application, • Basic Statistical Process Control and Statistical Fundamentals, • Experienced with ERP systems, • Strong planning and organizational skills, • Detail oriented, • Good interpersonal skills, • Strong verbal and written communication skills, • Strong math skills, • Visual Acuity mandatory (ability to visually identify color variations and capsule / tablet irregularities), • Flexible availability with regards to shift assignments when necessary, • Competent Microsoft Windows-Office and EXCEL applications Physical Requirements • Ability to lift, push or pull packages of up to 40 lbs., • Ability to work standing for long periods. Desired Skills • Basic Statistical Process Control and Statistical Fundamentals, • Minimum 3 years in a precision manufacturing or machining environment, • Experience with computer software like; Statistical Software, Access, advanced Excel Education and Experience: • Minimum education is High School Diploma, • Associates or higher in Technical Discipline/Trade preferred, • Minimum 3 years in a precision manufacturing or machining environment Compensation: $20.00 - $30.00 per hour based on experience GW Lisk is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Job Description WHO WE ARE Dejana Truck & Utility Equipment is a division of Douglas Dynamics, North America’s premier manufacturer and up-fitter of work truck attachments and equipment. Our belief is that our employees and culture are just as important to the company as serving our customers. We place a high value on building a team and working environment where individuals can succeed professionally and personally. As a team member at Douglas Dynamics, you can expect to make a difference through your work, to have a direct impact on the achievement of a very meaningful mission to serve our customers, to advance your career, and to have room for fun and fulfillment in your daily life. Our focus on integrity, teamwork, and high performance creates an ideal work environment for every one of our employees. We offer competitive salaries, benefits, and opportunities for personal and professional growth. Discover our opportunities and come see all the ways you can do more at Douglas Dynamics. We would love to have you join our team, where we offer top notch benefits, multiple avenues for advancement and a great working environment. HOW YOU WILL CONTRIBUTE Wiring Technicians work on up-fitting a wide range of truck and utility equipment, spanning from Vans to Class 8/9 Trucks. They should have experience in assembling and installing equipment and products in accordance with standard operating procedures. • Read, interpret, and follow basic blueprints, diagrams, engineering drawings, specifications, bill of materials, and other written instructions or procedures to accurately assemble/install equipment and products., • Perform quality work checks to ensure the product meets quality standards., • Perform all necessary documentation in a timely manner., • Confer with supervisor regarding quality or procedure problems., • Perform all work in accordance with established safety procedures., • Maintain a clean and safe work area., • Always work in a safe manner., • Be self-starting with basic vehicle electrical knowledge., • Learn/follow established company electrical guidelines., • Be proficient at troubleshooting simple electrical installations. An individual in this position must be able to successfully perform the essential duties and responsibilities listed above. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. The above list reflects the general details necessary to describe the principle and essential functions of the position and shall not be construed as the only duties that may be assigned for the position. WHAT WE OFFER YOU • Hourly rates ranging from $18.00/hr - $27.00/hr., • Compensation will be based on experience., • A fulfilling career with the ability to contribute to an Industry leader., • A comprehensive suite of benefits., • Competitive salary commensurate with experience., • A generous 401k match., • Profit sharing for all full-time employees. WHAT THIS ROLE NEEDS • Basic mechanical aptitude., • Knowledge and experience of 12-volt electrical diagnostics and wiring., • Ability to work independently with little supervision., • Attention to detail with the ability to follow verbal directions and written instructions., • A team-player with a good work ethic (courteous, flexible punctual and professional)., • A level-headed, detail-oriented and safety contentious individual., • Dejana Truck and Utility Equipment is a proud sponsor of GEDWorks, a company sponsored program to help any employee (or their family member) earn their GED as they work for us. Education & Experience • High School Diploma or Equivalent., • 1 year or less of work-related experience or education., • Knowledge and experience of installing electrical equipment. WORK ENVIRONMENT • Majority of the time will be spent sitting, standing, and walking on hard surfaces, for prolonged periods of time., • Substantial amount of pushing, pulling, and lifting of objects up to 50 lbs., • Mechanical, installation, and hand-eye coordination skills., • This job is predominantly indoors in a shop/manufacturing setting and will occur in the production area. Although the position is indoors there will be varying temperatures between different areas., • Will encounter a substantial amount of varying background noise. Employment Requirements Dejana Truck and Utility Equipment uses E-Verify for I-9 processing and all candidates must be eligible to work in the US. All positions require background checks and driver positions also require mvr/drug/alcohol testing before and/or during employment. If you agree and you wish to apply for a position, please continue with your submission. Thank you for your interest. Equal Opportunity Employer As an Equal Opportunity Employer, Douglas Dynamics, LLC does not discriminate against qualified applicants in hiring based on race, color, sex, age, sexual orientation, gender identity, national origin, disability, or any other characteristic protected by law.

Perform multiple computer-based functional tests or use electrical meter or other simple equipment to obtain functional test readout at the same time. Maintain assigned equipment and report damaged equipment; contact supervisor/line leader if supplies are needed. Able to work in the production floor

The Electrical and Instrument Supervisor oversees electrical and instrumentation maintenance activities within a power generation environment. The Electrical and Instrument Supervisor directly supervises non-exempt maintenance personnel and serves as the primary point of contact with Operations for

Job Description WHO WE ARE Dejana Truck & Utility Equipment is a division of Douglas Dynamics, North America’s premier manufacturer and up-fitter of work truck attachments and equipment. Our belief is that our employees and culture are just as important to the company as serving our customers. We place a high value on building a team and working environment where individuals can succeed professionally and personally. As a team member at Douglas Dynamics, you can expect to make a difference through your work, to have a direct impact on the achievement of a very meaningful mission to serve our customers, to advance your career, and to have room for fun and fulfillment in your daily life. Our focus on integrity, teamwork, and high performance creates an ideal work environment for every one of our employees. We offer competitive salaries, benefits, and opportunities for personal and professional growth. Discover our opportunities and come see all the ways you can do more at Douglas Dynamics. We would love to have you join our team, where we offer top notch benefits, multiple avenues for advancement and a great working environment. HOW YOU WILL CONTRIBUTE You will be responsible for performing the upfit of trucks, as well as fabricate, repair, maintain and install steel items and equipment. The assembly must be completed according to the goals set by the Production Manager. You will do this by: • Assembling basic equipment and products under close supervision and in accordance with standard operating procedures., • Reading, interpreting and following basic blueprints, diagrams, engineering drawings, specifications, bill of materials, and other written instructions or procedures to accurately assemble equipment and products., • Meeting production schedule deadlines as designated by the Production Manager., • Performing quality work checks to ensure the product meets quality standards., • Identifying product defects and documenting them., • Performing all necessary documentation in a timely manner., • Conferring with supervisor regarding quality or procedure problems., • Reworking and/or repairing assembled equipment and products according to engineering specification changes., • Performing all work in accordance with quality standards and established safety procedures., • Maintaining a clean and safe work area. WHAT WE OFFER YOU • Hourly rates ranging from $19.00/hr - $27.00/hr., • Compensation will be based on experience., • On the job training., • Opportunities for advancement., • A fulfilling career with the ability to contribute to an Industry leader., • A comprehensive suite of benefits., • A generous 401k match., • Profit sharing for all full-time employees., • Dejana Truck and Utility Equipment is a proud sponsor of GEDWorks, a company sponsored program to help any employee (or their family member) earn their GED as they work for us. WHAT THIS ROLE NEEDS • Must be able to maintain a high level of accuracy and attention to detail while working in a fast-paced environment with frequent interruptions., • Ability to follow written and verbal instructions, exercise sound judgment in resolving routine issues, and effectively manage multiple priorities simultaneously., • Must be able to communicate professionally and effectively with supervisors, coworkers, and employees, both verbally and in writing, including by telephone, email, and other business communication methods., • Ability to retain and execute multiple assignments while following oral and written instructions., • Strong organizational skills, attention to detail, and the ability to work independently while meeting production and manufacturing deadlines., • Knowledge and experience with 12-volt electrical wiring systems., • Mechanical and/or electrical aptitude with the ability to troubleshoot and resolve routine equipment-related issues., • Knowledge of MIG welding techniques and equipment preferred., • Must provide and maintain personal hand tools required to perform assigned duties., • Ability to safely operate hand tools, power tools, and related shop equipment., • Good vision for inspecting work, identifying defects, and performing detailed assembly and installation tasks. Education & Experience: • High School Diploma or Equivalent., • Three-year related experience (preferred but not mandatory) in a manufacturing environment or technical school., • Truck fitting experience is a plus. WORK ENVIRONMENT Most of the workday is spent standing and walking on concrete floors. Frequent bending, kneeling, reaching, pushing, pulling, and lifting are required. The ability to regularly lift and carry up to 50 pounds is required. Must be able to safely use hand tools and power tools and perform work requiring good hand-eye coordination and manual dexterity. Must be able to stand, walk, and move around the production area for extended periods of time. Good vision and hearing are required to safely perform work and communicate with coworkers. This position works indoors in a manufacturing and warehouse environment. Work is performed in production and installation areas and may require both sitting and standing throughout the day. Temperatures may vary throughout the facility depending on the work area. Exposure to noise, dust, and other conditions commonly found in a manufacturing environment should be expected. Employment Requirements Dejana Truck and Utility Equipment uses E-Verify for I-9 processing and all candidates must be eligible to work in the US. All positions require background checks and driver positions also require mvr/drug/alcohol testing before and/or during employment. If you agree and you wish to apply for a position, please continue with your submission. Thank you for your interest. Equal Opportunity Employer As an Equal Opportunity Employer, Douglas Dynamics, LLC does not discriminate against qualified applicants in hiring based on race, color, sex, age, sexual orientation, gender identity, national origin, disability, or any other characteristic protected by law.

Job DescriptionDescription: Northeast Aero Compressor and PG Aerotech are seeking an experienced Facilities Technician II to help maintain the safe, compliant, and efficient operation of our 55,000 square foot FAA Part 145 certificated repair station and MRO facility in Hauppauge, NY. This is a mid-level, hands-on role for a technician who has moved beyond entry-level building maintenance and is ready to take on greater ownership of preventive maintenance programs, more complex mechanical and electrical troubleshooting, and vendor coordination — while continuing to perform daily hands-on repair and upkeep work. The Facilities Technician II reports to the Production Manager and works closely with them to keep all building systems, ground support equipment, and industrial machinery running reliably. Requirements: • Perform routine and corrective maintenance on HVAC, electrical, plumbing, lighting, and overhead door systems, escalating only the most complex issues to the Facilities Supervisor, • Execute scheduled Preventive Maintenance (PM) tasks and help maintain accurate maintenance logs, service records, and equipment histories in compliance with repair station requirements, • Diagnose and troubleshoot mechanical, electrical, and pneumatic/hydraulic issues on industrial equipment and aviation ground support equipment, • Assist in coordinating third-party vendors and contractors for specialized inspections, certifications, and repairs, • Perform general building maintenance including carpentry, painting, minor structural repairs, and groundskeeping/snow removal as needed, • Conduct routine facility and safety inspections, identify hazards or worn components, and proactively address or report them, • Support the cleanliness and organization of the facility, including production floor, offices, break rooms, restrooms, and grounds, • Help ensure fire and life-safety systems are functioning correctly and are tested/documented on schedule, • Operate company vehicles and material handling equipment (e.g., forklift) to move tools, parts, and supplies between areas or job sites, • Maintain compliance with FAA Part 145 repair station requirements, OSHA regulations, EPA standards, and applicable building codes, • Respond to maintenance requests from building occupants and prioritize/resolve issues promptly Experience and Skills • 2–5 years of experience in building/facilities maintenance, industrial maintenance, or a related mechanical/electrical trade; aviation, manufacturing, or regulated-facility experience preferred, • Working knowledge of HVAC, electrical, and plumbing systems, with demonstrated ability to independently troubleshoot and repair common issues, • Some exposure to industrial equipment such as compressed air systems, generators, or pneumatic/hydraulic equipment preferred, • Comfortable using hand and power tools safely and effectively, with strong mechanical aptitude and problem-solving skills, • Ability to work independently on assigned tasks while collaborating with the Facilities Supervisor on larger projects, • Strong communication and customer service skills when responding to occupant requests, • Ability to pass a pre-employment and random drug and alcohol screening as well as a background check Physical Requirements • Ability to lift at least 50 pounds, • Comfortable working at heights on ladders and lifts, and in confined spaces, outdoor environments, and varying temperatures, • Manual dexterity and ability to constantly manipulate small to medium components, • Ability to stand, walk, bend, and climb stairs for extended periods, • Frequent use of hand tools, power tools, and cleaning/lubricating/painting chemicals Education / Licenses / Certifications • High school diploma or GED required; trade school training or an associate degree in a mechanical, electrical, or facilities-related discipline preferred, • Valid state driver's license with a clean driving record required, • Forklift certification preferred, or ability to obtain within 30 days of hire, • OSHA 10-Hour (or higher) General Industry certification preferred, or willingness to obtain Compensation and Benefits • Full-time, hourly position: $28–$34 per hour, commensurate with experience, skills, and certifications, • This range reflects a mid-level role positioned between our entry-level Facilities Technician/Driver and our Facilities Supervisor, based on current Long Island / Hauppauge, NY market data for facilities and building maintenance technicians, • Medical, dental, vision, and life insurance options, • 401(k) with 100% match on the first 4%, • Paid holidays, vacation, and sick/personal leave accrued from date of hire, • Training/education budget, gym reimbursement, complimentary drinks, company events, and philanthropy opportunities

Job Description WHO WE ARE Dejana Truck & Utility Equipment is a division of Douglas Dynamics, North America’s premier manufacturer and up-fitter of work truck attachments and equipment. Our belief is that our employees and culture are just as important to the company as serving our customers. We place a high value on building a team and working environment where individuals can succeed professionally and personally. As a team member at Douglas Dynamics, you can expect to make a difference through your work, to have a direct impact on the achievement of a very meaningful mission to serve our customers, to advance your career, and to have room for fun and fulfillment in your daily life. Our focus on integrity, teamwork, and high performance creates an ideal work environment for every one of our employees. We offer competitive salaries, benefits, and opportunities for personal and professional growth. Discover our opportunities and come see all the ways you can do more at Douglas Dynamics. We would love to have you join our team, where we offer top notch benefits, multiple avenues for advancement and a great working environment. HOW YOU WILL CONTRIBUTE You will be responsible for performing the assembly of trucks and cargo vans. The assembly must be completed according to the goals set by the Branch Manager. You will do this by: • Assembling advanced equipment and products under close supervision and in accordance with standard operating procedures., • Reading, interpreting and following advanced blueprints, diagrams, engineering drawings, specifications, bill of materials, and other written instructions or procedures to accurately assemble equipment and products., • Meeting production schedule deadlines as designated by the Production Manager., • Performing quality work checks to ensure the product meets quality standards., • Identifying product defects and documenting them., • Performing all necessary documentation in a timely manner., • Conferring with supervisor regarding quality or procedure problems., • Reworking and/or repairing assembled equipment and products according to engineering specification changes., • Performing all work in accordance with quality standards and established safety procedures., • Maintaining a clean and safe work area. WHAT WE OFFER YOU • Hourly rates ranging from $23.00/hr - $35.00/hr., • Compensation will be based on experience., • On the job training., • Opportunities for advancement., • A fulfilling career with the ability to contribute to an Industry leader., • A comprehensive suite of benefits., • A generous 401k match., • Profit sharing for all full-time employees., • Dejana Truck and Utility Equipment is a proud sponsor of GEDWorks, a company sponsored program to help any employee (or their family member) earn their GED as they work for us. WHAT THIS ROLE NEEDS • Ability to assemble and install equipment and products under close supervision and in accordance with standard operating procedures., • Ability to read, interpret and follow advanced blueprints, diagrams, engineering drawings, specifications, bill of materials, and other written instructions or procedures to accurately assemble/install equipment and products., • Ability to perform hydraulic, PTO, and auto-electrical installations., • Ability to perform quality work checks to ensure the product meets quality standards., • Ability to follow oral and written instructions while remembering multiple tasks., • Good vision, detail oriented and organized; self-motivated and able to meet manufacturing deadlines in a fast-paced environment., • Advanced mechanical and/or electrical skills., • Must have own tools., • Ability to operate hand and power tools.. Education & Experience: • High School Diploma or Equivalent., • Five-years of related experience in a manufacturing environment or technical school. WORK ENVIRONMENT Most of the workday is spent standing and walking on concrete floors. Frequent bending, kneeling, reaching, pushing, pulling, and lifting are required. The ability to regularly lift and carry up to 50 pounds is required. Must be able to safely use hand tools and power tools and perform work requiring good hand-eye coordination and manual dexterity. Must be able to stand, walk, and move around the production area for extended periods of time. Good vision and hearing are required to safely perform work and communicate with coworkers. This position works indoors in a manufacturing and warehouse environment. Work is performed in production and installation areas and may require both sitting and standing throughout the day. Temperatures may vary throughout the facility depending on the work area. Exposure to noise, dust, and other conditions commonly found in a manufacturing environment should be expected. Employment Requirements Dejana Truck and Utility Equipment uses E-Verify for I-9 processing and all candidates must be eligible to work in the US. All positions require background checks and driver positions also require mvr/drug/alcohol testing before and/or during employment. If you agree and you wish to apply for a position, please continue with your submission. Thank you for your interest. Equal Opportunity Employer As an Equal Opportunity Employer, Douglas Dynamics, LLC does not discriminate against qualified applicants in hiring based on race, color, sex, age, sexual orientation, gender identity, national origin, disability, or any other characteristic protected by law.

Job Description Overview SP+, a Metropolis company, is an artificial intelligence company for the real world. We use computer vision to enable checkout-free parking experiences. So there’s no fumbling with tickets, machines, apps, or credit cards. You just “drive in and drive out.” We are the largest parking network in America, with over 23,000 employees powering mobility at over 4,000 locations across North America and Europe. Today, we are reinventing parking. Because it’s important, it's everywhere and impacts everyone. Tomorrow, we will power checkout-free experiences anywhere you go to make the everyday experiences of living, working, and playing remarkable - giving us back our most valuable asset, time. Responsibilities Basic Function - This position is involved with facility maintenance duties and customer interface. Previous experience is preferred, but not required in all positions. Individual must be able to perform with minimum supervision. Other duties may include: equipment service and general housekeeping tasks. • Perform all maintenance and cleaning tasks noted in the checklists and as directed by the facility manager/supervisor to ensure that all dirt, dust, litter and debris is removed from all areas of the facility using brooms, mops, brushes and other hand tools., • Walk garage daily to note and correct any maintenance problems., • Sweep and pick up around the entrances and exits to the garage and stairwells as well as clean surface area rails, etc. on all levels, the booth, the office and rest rooms., • Empty all trashcans in the garage, the booth and the office., • Paint any and all areas of the facility as directed by the facility manager/supervisor to ensure that all painted surfaces such as poles, signs, doors, walls, curbs, islands, gates, etc. are properly maintained and look neat and clean., • Replace burned out bulbs., • Apply oil absorbent to oil spills., • Submit requests for repairs or maintenance., • Check conditions of safety items, such as gate arms to ensure clearance bars are secure., • Check ticket spitters and gates daily for proper operations, ticket supply, accuracy of time on clock and general appearance., • Provide ticket and record gate counters to the Manager., • Keep an inventory of janitorial supplies., • Maintain a garage/lot sweep sheet., • Operate automatic sweepers, scrubbers, outdoor equipment such as weed eater, lawnmowers or other electrical tools to repair or construct items, as applicable., • Shovel, plow or blow snow from the entrance or exit ramps and in areas designated by the Facility Manager using shovels, snow blowers and other light duty equipment., • Report any unknown, observed or suspected violations of company policy, safety hazards or any unusual occurrence to the Facility Manager in a timely manner., • Practice the Three Keys to Customer Satisfaction including the Five Customer Service Behaviors to ensure successful customer interactions., • Assist customers within the facility or as directed by the Facility Manager/Supervisor., • Resolve customer complaints independently or with the aid of a supervisor., • Be familiar with all aspects of the operation and cover other duties including cashier, attendant, etc. on an as needed basis., • Maintain a neat and clean appearance and arrive and remain complete uniform before and during scheduled shifts., • Perform other duties as assigned. Qualifications Qualification Requirements: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience: High School Diploma or a combination of experience and education. May require facility maintenance, electrical and or painting experience and or skills training depending on the job assignment and facility. License Requirement: The individual will only be required to have and maintain a valid state-issued driver’s license, with a current address and acceptable driving record, if the individual is expected to be able to drive a company vehicle or drive on company business. Availability to Work: Special shift requirements, if any, will vary depending on a location's hiring needs. If applicable, availability to work 3rd shift and/or week-ends may be a requirement. Oral Communication: Speaks clearly; Listens and gets clarification; Responds well to questions. Written Communication: Writes clearly and informatively; Able to read and interpret written information. Customer Service: Maintains positive attitude. Responds to requests for service and assistance. Adaptability: Adapts to changes in the work environment; Able to deal with change, delays, or unexpected events. Judgment: Exhibits sound and accurate judgment. Professionalism: Reacts well under pressure. Language Ability: Ability to read, write and interpret the English language. Ability to respond to common inquiries or complaints from customers. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands and fingers and to communicate with customers and fellow employees. The employee is frequently required to sit; reach with hands and arms; stand or walk for long periods of time (up to 8 hours). The employee is also frequently required to climb, balance, stoop, kneel, and crouch. In addition, the employee is required to of twist, turn, stretch, and bend on a frequent basis. The employee must be able to lift and move 50 pounds or more regularly. The employee must be able to move in a relatively quick manner. Specific vision abilities required by this job include Close vision, Peripheral vision and Ability to adjust focus. Ability to withstand working with dust, chemicals and other possible irritants and work in extreme weather conditions (rain, snow, cold, heat). Salary Range: $17.00 hr This role is eligible to earn tips in addition to the posted hourly rate. Benefits: Eligible employees will participate in the various benefits plans including medical, dental, vision, flexible spending accounts, long/short term disability, life insurance, accident insurance, 401k and paid time off. SP+ is an equal opportunity employer committed in policy and practice to recruit, hire, train, and promote, in all job classifications, without regard to race, color, ancestry, religion, sex, age, national origin, citizenship status, marital status, sexual orientation, veteran status, gender identity, disability or other classes protected by federal or state law. SP+ does not tolerate harassment or retaliation against any employee or applicant based on these characteristics or because the individual exercised their EEO rights. Right to Work Poster SP+, a Metropolis Company, may utilize an automated employment decision tool (AEDT) to assess or evaluate your candidacy for employment or promotion. AEDTs are used to assist in assessing a candidate’s application relative to the required job qualifications and responsibilities listed in the job posting. As part of this process, SP+ retains data relevant to your candidacy, including personal information, for a period that is reasonably necessary for the use of the tool. If you are hired for the position, your data may become part of your employee records. If you are an applicant to a New York City job posting and wish to request an alternative selection process accommodation or have questions about our data retention policy, please contact Recruit@spplus.com. We are here to assist you.

Job Description Responsibilities include: • Perform routine building maintenance duties, including painting, minor electrical repairs, plumbing, carpentry, and heating and ventilation systems maintenance, • Clean the interior of the building, as well as machinery and equipment, and the exterior of the building, • Ability to do heavy ladder work, • Knowledge of 3-phase electric work & control wiring, • Good Mechanical Skills and being able to identify the correct tool for the job., • Ability to use measuring devices such as micrometer, vernier, multimeter, scale, and tape measure, • Comply with all safety and health regulations, • Keep inventory of maintenance and cleaning supplies and equipment, and report needs to supervisor, • Respond to emergency calls for maintenance and repairs, • Diagnose and troubleshoot issues, • Work with and maintain relationships with contracted vendors Qualifications: • High school diploma or GED, • 2+ years of experience, • Knowledge of HVAC, plumbing, electrical, carpentry, and mechanical systems (including relevant equipment and tools) is a plus, • Ability to stand or walk for extended periods of time; ability to bend, kneel, stoop, and lift or move heavy equipment, • Ability to read and interpret safety rules, operating and maintenance instructions, and other manuals and documents, • Ability to work in a team and follow instructions from supervisors, • May be required to work outside of normal work hours, • Need to be open-minded and eager to learn\nCompany Description Manufacturer of innovative cable trays, power distribution, and enclosures. Customers include leading companies, government organizations, and educational institutions in the US and globally. Manufacturer of innovative cable trays, power distribution, and enclosures. Customers include leading companies, government organizations, and educational institutions in the US and globally.

HireTalent - - Responsibilities: Perform electronic and electro-mechanical assembly of components, sub-assemblies, and finished products; Follow schematics, blueprints, diagrams, and written/verbal instructions to complete assembly tasks; Execute wiring, cable harnessing, and component installation

North Atlantic Industries is a leading provider of embedded electronic solutions, specializing in rugged embedded computing, power supplies and motion simulation and measurement technologies.Our products and services are used by the military, aerospace, and industrial markets, helping to advance tec

Assemble/solder batteries, chargers, and accessories by hand, hand tools, simple automatic tools, and automated machines following supervisor's directions and work instructions. Perform multiple computer-based functional tests or use electrical meter or other simple equipment to obtain functional te

PrideStaff - - Responsibilities: Perform a variety of electronic or electro-mechanical assembly operations on assemblies or sub-assemblies.Perform wiring, component installation, hand soldering and cable harnessing on assembly units.Make setups and adjustments holding tolerances to blueprint specif

Assemble/solder batteries, chargers, and accessories by hand, hand tools, simple automatic tools, and automated machines following supervisor's directions and work instructions. Perform multiple computer-based functional tests or use electrical meter or other simple equipment to obtain functional te

North Atlantic Industries is a leading provider of embedded electronic solutions, specializing in rugged embedded computing, power supplies and motion simulation and measurement technologies.Our products and services are used by the military, aerospace, and industrial markets, helping to advance tec

Construction Management company seeking an experienced Project Manager to join its rapidly growing 50-year-old company.This Project Manager must plan and supervise a wide range of construction projects from start to finish by organizing and overseeing construction procedures to ensure they are compl

PrideStaff - - Responsibilities: Actively manages their Individual Follow-Up Queue, prioritizing work orders for timely resolution; Orchestrate a seamless workflow by assigning work orders strategically; Build strong vendor relationships to secure crucial updates, quotes, and assets; Secures compet

Construction Management company seeking an experienced Project Manager to join its rapidly growing 50-year-old company.This Project Manager must plan and supervise a wide range of construction projects from start to finish by organizing and overseeing construction procedures to ensure they are compl

Construction Management company seeking an experienced Project Manager to join its rapidly growing 50-year-old company.This Project Manager must plan and supervise a wide range of construction projects from start to finish by organizing and overseeing construction procedures to ensure they are compl

Construction Management company seeking an experienced Senior Project Manager to join its rapidly growing 50-year-old company.This Senior Project Manager must plan and supervise a wide range of construction projects from start to finish by organizing and overseeing construction procedures to ensure

Construction Management company seeking an experienced Senior Project Manager to join its rapidly growing 50-year-old company.This Senior Project Manager must plan and supervise a wide range of construction projects from start to finish by organizing and overseeing construction procedures to ensure

Construction Management company seeking an experienced Senior Project Manager to join its rapidly growing 50-year-old company.This Senior Project Manager must plan and supervise a wide range of construction projects from start to finish by organizing and overseeing construction procedures to ensure

GreyStar - 78 Maison Court - Responsibilities: Complete assigned work orders and preventative maintenance on the property; Perform make-ready repairs and inspections for new move-ins; Track inventory and requisition supplies for maintenance; Maintain grounds and common areas and perform cleaning/pai

Catholic Health - - Responsibilities: Perform plumbing, heating, medical gases operation, maintenance and repair of hospital movable equipment; Conduct building maintenance as required.

Danaher - - Responsibilities: Perform preventive and corrective maintenance on production and facilities equipment; Inspect and maintain building and grounds and life safety systems; Coordinate repairs and maintenance with external vendors; Improve equipment reliability and maintenance processes; M

Northwell Health - 75 North Country Road [Maintenance Technician] As a Maintenance Mechanic at Northwell Health, you'll: Perform a variety of skilled tasks including general repairs and maintenance, installations, renovations, construction work, fabrications, building and equipment repairs; Recogniz

Responsibilities: Install and service on-site nitrogen generation plants and bulk gas systems; Perform periodic preventive maintenance on nitrogen generation equipment; Read blueprints and manufacturer drawings related to bulk delivery sites; Respond to emergencies 24 hours per day; Ensure safety co

Responsible for assisting with the daily operation, maintenance, preventative maintenance and repairs of building plumbing, electrical, HVAC and all other building systems. Must have working knowledge of all building mechanical, electrical, HVAC, plumbing, life safety, and fire protection systems to

Technician, Line Service (ISP FT).The Line Service Technician (LST) is responsible for providing safe, efficient aircraft ground handling services while delivering exceptional customer service to aircraft owners, guests, and flight crews.This role is hands on and operations focused, supporting all a

Central Service Technician - Full Time, Evenings.Patchogue, NY Full-Time/Regular.NYU Langone HospitalSuffolk is a 306-bed medical center, providing care to residents of eastern Long Island.The hospital facility is home to the Knapp Cardiac Care Centeran advanced heart disease diagnostic and treatme

Join our team as an Electronics Assembler, where you'll perform precision disassembly, reassembly, and testing of cutting-edge electronic products using advanced tools and equipment.You'll mentor teammates, troubleshoot using schematics, and ensure Electronics, Assembler, Electronic, Operations, As

Electrical Wiring, schematics, multimeter, CANbus etc. Provide repair and maintenance to medium / heavy duty trucks, and background in hydraulics and electrical. Submit all work/repair orders as required to a supervisor for approval to ensure budgets are maintained and costs of vehicle repairs accur

Our client, a manufacturing conglomerate company, is looking for an assembler level 3p for their East Setauket, NY location.Performs a wide variety of electronic or electro-mechanical assembly operations on assemblies or sub-assemblies.Determines and/or follows methods and sequence of operations in

America Division: Fluid Systems (FSD) Location: USA FLUID SYSTEMS DIV - H Job Family: Manufacturing Job Type: Regular.Participation in Annual Incentive Program.Parker offers competitive benefit programs, including:.Comprehensive coverage for medical, prescription drugs, dental, vision, voluntary opt

Electronic Assembly Technician.As an Electronic Assembly Technician at GE Aerospace, you will independently perform assembly tasks including PC board assembly, soldering, and mechanical assembly, ensuring each step meets quality specifications.You will use various tools and testing equipment, mainta