Electrical supervisor jobs in Torrance, CaliforniaCreate job alerts

Job Description We are currently seeking a maintenance technician to join our team! This ideal candidate will be responsible for performing routine maintenance of shopping centers primarily in west Los Angeles and the Southbay. The maintenance will consist of painting, cleaning, removing graffiti, moving furniture, power washing as needed, climbing up onto roofs to trouble shoot roof leaks or issues as directed as well as responding to trip hazards and removing or dealing with illegal dumping or damage caused by patrons and or vandalism. Required skill sets are significant experience with painting, drywall and light electrical and plumbing with a minimum of 15 years of experience in these trades as we want this employee to handle simple tenant improvements. The candidate will also be required to drive to properties in the company portfolio directed by the supervisor to ensure that the properties are clean, free of debris, graffiti or report any vandalism. Please indicate your city of residence as we will give preference to candidates who live in west LA, Southbay, southern San Fernando Valley or west of the 605 freeway. This candidate must have a valid California driver's license and liability auto insurance. The company will pay a mileage reimbursement for the use of employee’s vehicle to go to sites in addition to the daily commute to Redondo Beach. The candidate will be punctual, reliable and be able to communicate effectively with other staff members, commercial tenants and outside vendors. This candidate should be able to multitask and prioritize work and any issues effectively. The position will require the technician to be stationed and begin the workday at our Redondo Shores shopping center in Redondo Beach. The candidate should also possess general computer skills as it will require that an electronic timecard be completed and access and response to emails will be fundamental in this role. This role is a full-time Monday - Friday position although, as with all employees, will be expected to answer any after hour emergency calls and direct them to the appropriate parties or the supervisor. This is a non-exempt position so is eligible for overtime. Company DescriptionHaagen Company, headquartered in Los Angeles, California is the successor to the Alexander Haagen Development Company, which during the late 1980s and 1990s was Southern California’s largest retail developer. In its 50-year history, Haagen Company has been, and is responsible for, the development of more than 16 million square feet of retail space. Many of Haagen’s projects, which include more than 140 neighborhood, community, promotional and regional centers, feature a blending of high-end and off-price retail shops, family-style restaurants and entertainment in a quality retail environmentHaagen Company, headquartered in Los Angeles, California is the successor to the Alexander Haagen Development Company, which during the late 1980s and 1990s was Southern California’s largest retail developer. In its 50-year history, Haagen Company has been, and is responsible for, the development of more than 16 million square feet of retail space. Many of Haagen’s projects, which include more than 140 neighborhood, community, promotional and regional centers, feature a blending of high-end and off-price retail shops, family-style restaurants and entertainment in a quality retail environment

Maintenance Technician (Beverage Experience Desired) - Up tp $37 per hour / 1st shift This Jobot Job is hosted by: Gabriel Ozuna Are you a fit? Easy Apply now by clicking the "Quick Apply" buttonand sending us your resume. Salary: $35 - $37 per hour A bit about us: We are a leading producer, packager and distributor of high quality, great tasting, health-focused beverages. We continue to experience significant growth and are looking to expand our maintenance & engineering team by adding an experienced Maintenance Technician. Why join us? We value our people as much we value our products. When you put your people first, you can't lose. We strive to provide our employees with a great work environment, we offer industry leading pay & benefits. The future is bright here, come join us on this amazing journey! Job Details Resolves day-to-day technical problems on the production lines. Inspect, test, diagnose, repair, and maintains production equipment, machinery, or instruments to ensure that it functions reliably and complies with process specifications. Complete preventive maintenance work orders as assigned and recommend revisions to improve reliability Communicates machine improvement suggestions, equipment requiring maintenance, training opportunities, or operational/safety concerns to the supervisor when appropriate. Utilizes the CMMS to create, manage, and document all work; Reviews the written quality of Maintenance Work Orders to ensure explanations are complete and accurate. Compiles shift information to lead shift “pass down” meetings. Works with Maintenance Manager, Operations Manager, and Director of Engineering to drive Root Cause Failure Analysis. Responsible for the organization of tools & parts; Orders non-stocked parts for the team; arrange for material and equipment to accommodate unforeseen/unscheduled conditions. Responsible for quality, duration, and thoroughness of all work under jurisdiction. Qualifications & Requirements 5 years of manufacturing maintenance experience 2 years of experience in Food, Beverage, or other consumer packaged goods. Preferred experience working on Krones bottling lines. Mechanical/Electrical experience maintaining production equipment in a continuous production environment. Preferred experience with Industrial Electrical Wiring, Mechanical/Electrical Devices, Circuits, Robotics, PLC, and computer controlled. Ability to read and understand standard operating procedures, operation manuals, manufacturer’s instructions, and/or engineering specifications Know, understand and be compliant with Confined Space Entry procedure, NFPA 70E, and Lockout procedure is essential Experience with Krones bottling lines Experience with packaging/high-speed production (e.g., bottling, consumer products, etc.). Experience with basic electrical systems (e.g., starters, fuses, contacts, relays). Experience with compressors/ammonia systems (e.g., refrigeration systems). Experience with conveyors (air cylinders, diverters, sensors, motor/speed controls). Experience with electrical systems (installation, frequency drive, troubleshooting) Experience with electronics (e.g., level probes, flow meters, drives/VFDs, etc.). Experience with gearing and gear boxes (rebuilds, ordering parts, machining parts). Experience with hydraulic systems (high pressure cylinders, pumps, valves, troubleshooting). Experience with kinematics (e.g., line speed/sprocket size ratios, etc.). Experience with PLC (e.g., industrial maintenance, computer control systems, etc.). Experience with pneumatics (solenoids, cylinders, motor brakes, reading, troubleshooting). Experience with pneumatics/air compression (e.g., valves, cylinders, etc.). Experience with preventative maintenance (computerized preventative charts/data). Experience with pumps (e.g., troubleshooting, replacing seals/motors, understanding specs). Experience with schematics (e.g., electrical blueprints with switches, starters, maps, relays). Experience with SERVO (e.g., intelligent/robotic motors, in-coders, etc.) Experience with troubleshooting (e.g., diagnostics, problem solving, etc.). Interested in hearing more? Easy Apply now by clicking the "Quick Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description Maintenance Technician Reports To: Maintenance & Reliability Supervisor Summary: The Maintenance Technician assists with preventative maintenance on all production and packaging equipment in a safe and efficient manner. Works with Maintenance Team, QA Team, and Plant Manager to ensure facility and equipment are serviced and available with least amount of downtime. Responsible for performing highly diversified duties to install, troubleshoot, repair and maintain production and facility equipment according to safety, predictive and productive maintenance systems and processes to support the achievement of the site's business goals and objectives. Core Competencies: • Time Management, • Customer Focus, • Communication, • Operating Equipment, • Teamwork, • Quality Orientation, • Problem Solving, • Accountability and Dependability, • Planning and Organizing, • Mathematical Reasoning Core Values: Demonstrate and uphold Core Values in interactions with internal and external partners: • ENGAGEMENT - Displays enthusiasm for job duties and participates in the attainment and advancement of organizational goals and interests., • INNOVATION - Displays the ability to think outside the box in order to develop creative and new solutions or products that meet current and future needs., • PROFESSIONALISM - Displays the behaviors and competencies that are expected of the position and the organization., • RESPECT - Displays an appreciation of different opinions, roles, experiences and backgrounds, follows the chain of command. Job Duties: • Performs mechanical and preventative maintenance work on all production and packaging equipment as per preventative maintenance manuals., • Maintains records of repairs, parts inventory, modifications of equipment, programs or settings., • Assists with setup and/or movement of equipment during change-overs or expansion., • Maintains tools and maintenance shop in a safe, clean and organized manner., • Provides emergency/unscheduled repairs of equipment and performs scheduled maintenance repairs of equipment., • Performs mechanical jobs including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting and repair of machines., • Reads and interprets equipment manuals and work orders to perform required maintenance and service., • Diagnoses problems, replaces or repairs parts, tests and adjusts., • Performs a variety of general plumbing maintenance, electrical and carpentry functions as needed to support maintenance department within parameters of skills and training., • Uses a variety of hand and power tools, electric meters and material handling equipment in performing duties., • Comply with safety regulations and maintains clean and orderly work areas., • Performs all other duties as assigned or needed. Requirements: • High school diploma/GED, completion of a mechanical trade strongly preferred., • Experience as a production or industrial mechanic technician, preferably maintaining high-speed packaging and processing equipment within the food industry., • Electrical troubleshooting knowledge on multiple voltages and can read electrical prints., • Highly motivated and able to work independently and as a team player., • Ability to comprehend and communicate detailed instructions orally and in writing., • Ability to multi-task and establish priorities., • Ability to maintain organization of maintenance schedules and files in a changing environment., • Exhibit initiative, responsibility, flexibility and leadership., • Knowledge of local, provincial and federal workplace compliance regulations, ordinances and legislation., • Strong communication and problem-solving skills., • Possess a valid driver's license., • Excellent time management and project management skills., • High level of sound and independent judgment and reasoning., • Highly flexible, with solid interpersonal skills that allow one to work effectively in a diverse working environment., • Able to work well under pressure., • Strong attention to detail., • Knowledge of Good Manufacturing Practices (GMP), preferably in a food manufacturing facility., • Highly punctual. Work Conditions / Physical Demands: • Physical ability to lift up to 50lbs, • Work is performed in a combination of environments, including meat production room with temperatures of -1 to +4 degrees Celsius., • Safety equipment is required, e.g., steel-toed safety boots, safety glasses/goggles, hearing protection, etc., • Overtime as required., • Repetitive tasks within a fast-paced environment Compensation & Benefits • Pay: $27.00per hour, • Retirement: 401(k) company contribution, • Health & Wellness: 100% company-paid Medical, Dental, Vision, Basic Life Insurance, and Short/Long Term Disability benefits Why Join Greenstone Meats • Work with well-established, trusted brands across both retail and foodservice channels., • Join a strong, value-driven organization that treats employees, customers, and partners with respect and integrity., • Take on an exciting leadership opportunity to build, lead, and develop a high-performing marketing team aligned to the company’s strategic and commercial objectives., • Competitive, market-based compensation, complemented by generous benefits and pension package., • A wide range of company perks within a flexible, hybrid work environment that supports work-life balance. For information about the company, go to Only qualified candidates will be contacted for an interview. Greenstone Meats is an equal opportunity employer and considers qualified applicants for employment without regard to sex, race, color, religion, ethnic or national origin, gender, sexual orientation, gender identity or expression, age, pregnancy, leave status, disability, veteran status, genetic information and/or any other characteristic or status protected by national, federal, state or local law. Greenstone Meats is committed to providing an accessible and barrier-free environment. Accommodations are available on request for candidates throughout the selection process. Please contact Human Resources if accommodation is required.

Job DescriptionDescription: Become the Best Part of PMP Management! PMP is seeking a motivated, detailed, communicative, and personable professional to join our team as an Maintenance Technician, New Horizons South Bay. Who We Are Property Management Professionals LLC. (PMP) is an industry leading Association management firm providing extraordinary services to common interest developments throughout Southern California, Arizona, Utah, Texas and Colorado. PMP delivers a boutique-style level of service only a local management partner can, with the depth and breadth of support and training only seen at much larger management firms. PMP is one of the fastest growing management firms in each of our respective submarkets, which provides our team members’ a unique opportunity to develop and grow their careers. Our people-centric culture attracts and retains the industry’s top talent and has served as one of our competitive advantages, driving our growth and success over the past decade and a half. To learn more about PMP and our unique company culture, we invite you to visit our social media platforms below: Instagram/pmpmanage facebook/pmpmanage linkedin/company/pmpmanagement Who We’re Looking For PMP is looking for energetic, passionate, personable, and detail-oriented professionals to join our growing team. The right candidate will embrace change, celebrate innovation, and have an unwavering passion for providing extraordinary customer service to our valuable clients. Position Description: The Maintenance Technician, under the direction of the Maintenance Supervisor is responsible for providing on-site facility maintenance services and coordinating the on-going property care with approved vendors. The ideal candidate will possess strong communication skills, a passion providing extraordinary customer service, and a positive demeanor. Duties & Responsibilities: • Inspects buildings and other structures to determine functional systems and detect malfunctions, safety hazards and needed repair making notes and recommendations using a pre-established check sheet., • Performs minor electrical maintenance to include but not be limited to replacement or repair of fixtures (e.g. wall switches and outlets, incandescent and fluorescent bulbs and tubes, ballast, sockets, fuses, minor appliances, cords, etc.) using appropriate hand, power and specialty tools., • Performs minor plumbing maintenance (e.g. replacement or repair of leaks in drains and faucets, unclogging of drains, trenching and laying new lines, replacing drain hoses on washers and similar devices, etc.)., • Performs minor painting, carpentry and masonry work (e.g. preparing surfaces and using brush, sprayer, or roller to apply paints, stains, and varnishes, hanging doors, fitting locks and handles, etc.)., • Maintain an inventory supply suitable to accomplish the goals and tasks required each day., • Work directly with the management company, on-site staff, vendors, and the Board of Directors, providing the support and guidance necessary for them to meet their operational obligations and fiduciary duties., • Provide extraordinary service to all residents, addressing all matters timely., • Other duties as assigned. Required Qualifications: • Proven experience as a maintenance technician, • Basic understanding of electrical, hydraulic and other systems, • Finishing skills with drywall, carpentry, and light plumbing, • Knowledge of general maintenance processes and methods, • Working knowledge of tools, common appliances and devices, • Manual dexterity and problem-solving skills, • Good physical condition and strength with a willingness to work overtime, • High school diploma or equivalent; Certificate in HVAC, building maintenance or relevant field is a plus, • Extraordinary customer service skills, • An honest, responsible, optimistic and enjoyable demeanor Requirements and Demands – Common Physical / Mental Activities • Standing, walking, sitting, reading, stopping, climbing ladders, crawling in/through low spaces, • Hand and finger dexterity, clear speech, hearing/listening, reading and writing, • Clerical, basic math and analytical skills, judgment, problem-solving and decision-making, • Heavy lifting and moving, computer and related equipment, heavy equipment Environmental / Atmospheric Conditions • Inside and outside work, • Work outside on building roof and landings, • Hot and cold weather Machines, Tools, Equipment and Work Aids • All mechanical and electrical equipment, tools and ladders to be provided by the Cameo Woods Homeowners’ Association., • All equipment, supplies, etc. to be delivered to Cameo Woods Homeowners’ Association via courier service., • Use of owner vehicle, equipment, supplies, computer, phone, etc. is not required or permitted. Requirements: Shift: Monday to Friday Hours: 7:00 am - 3:30pm

Job Description We are a property management company that has been providing unsurpassed property management services to a large and diversified portfolio of properties in California, Texas, and Louisiana for over 30 years. We believe that our associates are our greatest asset, which is why we are dedicated to providing excellent benefits, competitive pay, amazing perks and advancement opportunities Join us in the rewarding career of providing “The Home You Deserve, Service you Trust.” *Email or call us for employment opportunities GENERAL PURPOSE OF JOB The Mulit-Site Maintenance Technician supports the overall maintenance operations of the assigned properties by performing corrective, preventative, emergency, and cosmetic repairs, as well as completing make-ready units. This role ensures the physical asset is maintained in a safe, functional, and visually appealing condition consistent with company standards and operational objectives. DUTIES, RESPONSIBILITIES AND KEY ACCOUNTABILITIES The following duties are essential to the successful performance of this position. This list is not exhaustive and may be supplemented as necessary to meet operational needs. 1. Preventative & Routine Maintenance Performs ongoing maintenance and repairs to preserve property integrity, including: • Electrical and plumbing systems, • HVAC systems (A/C and heating), • Boilers (gas and electric), • Water irrigation systems, • Interior and exterior lighting, • Gas fixtures and appliances (when applicable), • Security systems and fire protection equipment, • Pool and pool equipment, • Grounds maintenance and detailing 2. Corrective & Emergency Repairs Diagnoses and performs repairs to maintain safe and functional property conditions, including: • Roofing, gutters, fasteners, • Ceiling leaks and walls, • Stairs, gates, fences, patios, railings, • Doors, locks, cabinets, windows, sliding glass doors, • Tile, carpet, flooring, • Fireplaces and ceiling fans, • P.O. boxes and locking systems 3. Unit Turns & Make-Ready Process • Completes make-ready units in accordance with quality standards, • Prepares units for occupancy within required timelines, • Coordinates with management regarding readiness status 4. Inventory, Tools & Shop Management • Maintains clean, organized, and safe maintenance shop, • Ensures adequate inventory of parts and supplies, • Properly stores and maintains tools and equipment, • Reports major repair needs prior to expenditures 5. Customer Service & Professional Conduct • Provides professional and courteous service to residents, • Maintains professional appearance at all times, • Communicates effectively with management and residents, • Supports team members and property operations 6. On-Call & Additional Assignments • Participates in on-call rotation, • Responds to after-hours emergencies as required, • Completes special projects assigned by Lead Maintenance, Property Manager, or Regional Maintenance Supervisor 7. Other Projects and Duties • Complete additional projects assigned by the Senior Leadership or Regional Supervisor as the business needs may arise. 8. Key Accountabilities • Timely completion of assigned work orders and service requests, • Completion of make-ready units within established turn-time standards, • Proper reporting of major repairs prior to cost expenditure, • Participation in on-call rotation and emergency response, • Maintenance of safe and organized shop and work areas, • Compliance with safety policies and company procedures CAREER PROGRESSION Maintenance Technician roles may progress based on performance, certifications, and demonstrated leadership: • Maintenance Technician I (Entry Level), • Maintenance Technician II (Intermediate), • Maintenance Technician III (Advanced), • Lead Maintenance Technician POSITION REQUIREMENTS Core Competencies • Technical Proficiency - Demonstrates working knowledge of building systems and performs repairs accurately and safely., • Problem Solving - Identifies root causes of maintenance issues and implements effective, lasting solutions., • Time Management - Prioritizes work orders and tasks efficiently to meet deadlines., • Attention to Detail - Ensures repairs and make-ready units meet quality standards without oversight., • Customer Service Orientation - Maintains professional and courteous interactions with residents and team members., • Communication Skills - Clearly communicates repair needs, project updates, and concerns to management., • Safety Awareness - Adheres to OSHA standards and company safety procedures at all times., • Team Collaboration - Works cooperatively with maintenance and management teams to support property goals. EDUCATION and/or EXPERIENCE • High School Diploma or GED equivalent required, • 1–3 years of maintenance experience required, • HVAC Certification preferred, • Valid Driver’s License required COMPUTER, TECHNICAL & EQUIPMENT SKILLS • Basic Microsoft Office proficiency, • Ability to safely operate high-powered maintenance tools and equipment, • Working knowledge of building systems, HVAC, plumbing, and electrical systems WORK ENVIRONMENT This job entails moderate noise and clear vision. The frequency of exposure to work environment conditions is as follows • Close vision (clear vision at 20 inches or less) – Viewing Computer Screen, • Wet or humid conditions (non-weather): none, • Work near moving mechanical parts: 1/3 – 2/3, • Work in high, precarious places: under 1/3, • Fumes or airborne particles: under 1/3, • Toxic or caustic chemicals: under 1/3, • Outdoor weather conditions: over 2/3, • Extreme cold (non-weather): under 1/3, • Extreme heat (non-weather): under 1/3, • Risk of electrical shock: under 1/3, • Risk of Radiation: none, • Work with explosives: none, • Vibration: none PHYSICAL DEMANDS The frequency to physical demands are listed below: • Stand: over 2/3, • Sit: under 1/3, • Walk : over 2/3, • Use hands to finger, handle, or feel: over 2/3, • Reach with hands and arms: over 2/3, • Climb or balance: 1/3 to 2/3, • Stoop, kneel, crouch, or crawl: over 2/3, • Talk or hear: over 2/3 LIFTING OR FORCE EXERTED The frequency to lifting or force exerted are listed below: • Up to 10 pounds: over 2/3, • Up to 25 pounds: 1/3 to 2/3, • Up to 50 pounds: under 1/3, • Up to 100 pounds: none. Associates are required to request for assistance in carrying heavier items, especially over 100 pounds

Job DescriptionThe Non union Helper supports a building or a facility by doing things like changing light bulbs, cleaning spills, emptying trash and light mechanical maintenance. They will also do regular housekeeping to keep areas clean and safe. The Maintenance staff will report safety hazards and larger maintenance problems to a supervisor. They will also keep track and report on supplies inventory. The Maintenance staff must be flexible and willing to complete all tasks that are assigned. Pay: $30 hourly The pay listed is the Salary or Hourly range for this position. Any specific offer will vary based on the successful applicant’s education, experience, skills, abilities, geographic location, and alignment with market data. Shift: Monday thru Friday, 9 to 6 PM. Benefit Information:ABM offers a comprehensive benefits package. For information about ABM’s benefits, visit ABM Employee Benefits \u007C Front Line Team Members \u007C (Programa de Beneficios de ABM) Hours: Weekdays and includes weekend MAJOR DUTIES AND RESPONSIBILITIESRepair and maintenance of restroom and breakroom plumbing fixtures.Clearing drains by means of plunger and hand-held auger. General labor, such as carrying, stacking, organizing materials used in and around the job site.Debris and trash removal not part of janitorial contract or scope of work. Repairs and cleaning of HVAC registers, radiators return grills.Minor repairs of furniture.Maintaining and/or replacing door hardware. Repair / replacement of venetian blinds.Maintenance painting in mechanical and electrical rooms.Touch up painting in building common areas.Touch up painting in tenant spaces when authorized by property management. General cleaning in mechanical spaces.General cleaning of exterior entry spaces using vacuum, mop, broom, steam cleaner / high pressure sprayer, and other types of cleaning devices or equipment.Cleaning and painting of non-operating mechanical equipment which has been shut down, locked out and tagged by a Journeyman Engineer in accordance with ABM Lockout / Tagout Program.Miscellaneous handyman work requiring the limited use of hand tools.Cleaning roof drains, air vents, registers and radiators. Replacing lamps and cleaning light fixtures.Ballast replacement per ABM Lockout / Tagout polices.Replacing ceiling tiles. Floor tile replacement. Replacing air filters. Cleaning of engineering shop areas.Replacing fire extinguishers.Hanging framed objects not requiring the use of power tools other than cordless drill/drivers.MINIMUM REQUIREMENTSExperience that is commensurate with the specific facility for the position of Maintenance AttendantAbility to read and interpret blueprintsComputer skillsBasic building automation systems knowledgeCertification meeting OSHA ACM awareness training requirements is a PLUS We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description At Senra Systems, we believe that the future of manufacturing lies not in automation, but in configuration. We supercharge electrical wire harness manufacturing through software configuration, transforming skilled assembly tasks into high-throughput production lines. We enable customers to design what they want, when they want it and deliver harness builds at record-breaking speed. As an early member of the supply chain team, the Receiving Specialist will play a key role in supporting company growth and operational success. This position operates in a fast-paced environment and works closely with engineers, technicians, and supply chain team members to support receiving, inventory control, and material flow across the factory. Responsibilities • Receive, inspect, and process incoming materials and components., • Ensure accuracy of part number, manufacturer and required documentation is delivered from the vendor including certificate of conformance and required quality documentations., • Act as technical POC and go-to troubleshooter for the Receiving operation., • Partner with Lead and Supervisor to author, streamline, and implement receiving operations., • Ensure accurate material flow from receiving to inventory and kitting areas., • Track and record components such as wire, cable, connectors, and consumables through the receiving and kitting process., • Enter and scan material data, including supplier, distributor, date received, and other required fields., • Audit inventory levels throughout the facility to maintain accuracy and organization., • Conduct weekly cycle count on parts planned for kitting to maintain accurate inventory levels, • High school diploma or equivalent, plus 4+ years of experience in supply chain, inventory management, or a related field; or an associate degree in supply chain, engineering, or a similar discipline., • Experience in an inventory environment including both receiving and put away operations., • Proficiency with Excel, SharePoint, and ERP systems., • Strong critical thinking, troubleshooting, and communication skills required., • Experience working in a fast-paced environment such as construction, food service, or manufacturing., • Ability to manage multiple tasks simultaneously., • Strong teamwork mindset and pride in quality work., • Experience working with avionics components., • Experience handling wire harnesses, connectors, cables, wires, and consumable materials., • Experience coordinating shipments with multiple distributors., • Experience reviewing and auditing multiple bills of materials before production., • Compensation will be based on experience, qualifications, and other job-related factors., • Hourly Range: $28-35, • Unmatched opportunities to drive impact on a friendly and mission-driven team, • Own a piece of the pie with equity participation!, • Comprehensive medical, dental, vision, life and long-term disability coverage, • Flexible Spending Account (FSA) and Dependent Spending Account (DSA) for health-related expenses, • 20 vacation days per year and 12 company holidays for rest and relaxation, • a 401(k) plan to set yourself up for retirement, • Choose a record you love, and we'll add it to our growing vinyl collection!, • $50/month DoorDash credit – lunch is on us!, • Up to $100/month reimbursement for gym memberships, • Fully stocked kitchen with snacks and beverages, • Regular team-building events, lunches, and the occasional breakfast burrito!, • Bright, open office with communal spaces for collaboration and free parking ITAR REQUIREMENTS: • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Pay range$1—$10 USD

Company Overview ImmunityBio, Inc. (NASDAQ: IBRX) is a commercial-stage biotechnology company developing cell and immunotherapy products that are designed to help strengthen each patient's natural immune system, potentially enabling it to outsmart the disease and eliminate cancerous or infected cells. We envision a day when we no longer fear cancer, but can conquer it, thanks to the biological wonder that is the human immune system. Our scientists are working to develop novel therapies that harness that inherent power by amplifying both branches of the immune system, attacking cancerous or infected cells today while building immunological memory for tomorrow. The goal: to reprogram the patient's immune system and treat the host rather than just the disease. Why ImmunityBio? • ImmunityBio is developing cutting-edge technology with the goal to transform the lives of patients with cancer and develop next-generation therapies and vaccines that complement, harness and amplify the immune system to defeat cancers and infectious diseases., • Opportunity to join a publicly traded biopharmaceutical company with headquarters in Southern California., • Work with a collaborative team with the ability to work across different areas of the company., • Ability to join a growing company with professional development opportunities. Position Summary The Supervisor, Facilities Maintenance will supervise and direct the facilities maintenance, calibration and metrology team; and manage the maintenance, preventive/corrective maintenance and upkeep of manufacturing and production assets for multiple locations. The role will participate in cross functional teams to ensure ImmunityBio's expectations and standards are maintained. Essential Functions • Oversee and ensure all locations are maintained up to GMP standards and make recommendations for improving the maintenance, calibration, and safe use of equipment at multiple sites., • Lead, coach, train and evaluate the performance of team members while directing the maintenance and calibration of facilities assets at multiple locations. Establish work schedules for the maintenance, metrology and calibration team., • Interface with Senior Leadership and other stakeholders to plan and coordinate facilities preventative and corrective maintenance and provide progress reporting documents and briefing as required., • Liaise with and oversee contractors' performance and take action to ensure compliance with all company standards and maintenance and calibration requirements, including sanitation, safety, quality, scheduling, productivity and budget. Ensure compliance with all required permits., • Oversee, lead and perform preventive and corrective maintenance of critical plant equipment on a regular basis, to include, but not limited to, Manufacturing, Filling, Sterilization Equipment and electrical control systems as responsibility assigned to Manufacturing Maintenance in both cGMP and non-cGMP areas., • Lead and delegate repairs and replacement of mechanical, electrical and controls components of Manufacturing, Sterilization and Packaging Equipment., • Develop strategic plans for facility equipment maintenance, upgrades and acquisitions inclusive of participating in budgeting, cost estimation, and procurement processes., • Collaborate with architects, contractors, and vendors on facility projects as needed., • Troubleshoot, diagnose, and repair critical equipment including but not limited to plant equipment, filtration systems, centripetal equipment, pumps, sterilization, filling packaging equipment and electrical controls to include, but not limited to, indicators, electrical distribution, variable frequency drives, electric motors and electrical control systems., • Prepare maintenance reports, detail and document work order status., • Prepare metrics reports, for facilities calibrations and metrology KPI., • Lead engineering projects including but not limited to equipment installation, commissioning, and validation process. Ability to assist within the engineering group in equipment failure root cause analysis with prompt resolution., • Create, maintain and adhere to Standard Operational Procedures (SOP), work plans, maintenance data templates, and drawing redlines as necessary., • Oversee the maintenance of measurement data for the Measurement Data Template (MDT) and maintain metrics for reporting., • Maintain documents in VEEVA., • Ensure workplan templates are generated within computerized maintenance management system (CMMS) and resolves problems proactively as needed. Mentor and train new and junior team members., • Lead and attend required training and meetings. Maintains training records for the team., • Lead and participate in audits and regulatory inspections., • Perform and delegate other special projects and duties as assigned. Education & Experience • Bachelor's degree in Engineering, Facilities Management, or a related field with 7+ years of Process GMP, Mechanical experience required; or, • 8+ years of Process GMP, Mechanical experience with a Maintenance Certificate or Utilities Certificate required; or, • High School Diploma with 10+ years of Process GMP, Mechanical experience required., • 5+ years working experience of Computerized Maintenance Management Systems (CMMS) required., • 3+ years' experience working in an FDA regulated environment required., • Experience with and working knowledge of facilities equipment and preventive maintenance programs required., • Critical Utility Systems (WFI, PUW, HVAC, waste neutralization, electrical generators, process utilities, etc.) required, • Supervisory and/or budget management experience preferred., • Experience in a Pharma-Biotech manufacturing environment strongly preferred. Knowledge, Skills, & Abilities • Self-starter with the ability to work with minimum supervision., • Excellent Instrumentation and mechanical skills and knowledge of maintenance principles., • Ability to work in a fast-paced environment and maintain a high level of customer service., • Hands-on execution of maintenance of process equipment, utility equipment, and facilities, • Working knowledge of cGMPs, OSHA compliance, HVAC systems and cleanrooms, automated pharmaceutical processing and plant equipment., • Follow and comply with EPA, OSHA, and NFPA regulations and with SOPs and cGMP policies., • Ability to troubleshoot, diagnose, and repair of critical equipment including but not limited to:, • plant equipment, filtration systems, centripetal equipment, pumps, sterilization, filling packaging equipment and electrical controls to include, but not limited to, indicators, electrical distribution, variable frequency drives, electric motors and electrical control systems., • Excellent written and verbal communication skills to effectively convey information in face-to-face and in group settings., • Excellent teamwork and cooperation skills., • Ability to lead a team and navigate the team through complex situations., • Ability to understand and comprehend oral and written instructions., • Able to work independently and make sound judgments regarding safety, work methods and tools, • Ability to multi-task and exercise good judgment., • Proficient at understanding and writing reports and work instructions., • Ability to understand the advanced process and control theory of a Critical or Major system., • Able to demonstrate and maintain a positive attitude even during challenging tasks., • Ability to verify mechanical and electrical drawings for accuracy as well as read wiring diagrams, blueprints and P&ID drawings., • Able to understand and perform analog, digital, frequency, and time calibration of electronic systems and components. Working Environment / Physical Environment • This position works on-site., • Local travel required between ImmunityBio sites., • Exposure to onsite in-lab environment., • Must be able to don and wear Personal Protective Equipment (PPE) as required., • Available to work off hours (weekends, holidays, after hours) to support company objectives., • Ability to work in a standing position for long periods of time (up to 8 hours)., • Lifting, standing, climbing, bending, grasping, sitting, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position., • Must be able to frequently lift up to 35 pounds and occasionally lift/move 50 pounds. This position is eligible for a discretionary bonus and equity award. The annual base pay range for this position is below. The specific rate will depend on the successful candidate's qualifications, prior experience as well as geographic location. $126,000 (entry-level qualifications) to $140,000 (highly experienced) annually OR The application window is anticipated to close on 60 days from when it is posted or sooner if the position is filled or closed. ImmunityBio employees are as valuable as the people we serve. We have built a resource of robust benefit offerings to best support the total wellbeing of our team members and their families. Our competitive total rewards benefits package, for eligible employees, include: Medical, Dental and Vision Plan Options * Health and Financial Wellness Programs * Employer Assistance Program (EAP) * Company Paid and Voluntary Life/AD&D, Short-Term and Long-Term Disability * Healthcare and Dependent Care Flexible Spending Accounts * 401(k) Retirement Plan with Company Match * 529 Education Savings Program * Voluntary Legal Services, Identity Theft Protection, Pet Insurance and Employee Discounts, Rewards and Perks * Paid Time Off (PTO) includes: 11 Holidays * Exempt Employees are eligible for Unlimited PTO * Non-Exempt Employees are eligible for 10 Vacation Days, 56 Hours of Health Pay, 2 Personal Days and 1 Cultural Day * We are committed to providing you with the tools and resources you need to optimize your Health and Wellness. At ImmunityBio, we are an equal opportunity employer dedicated to diversity in the workplace. Our policy is to provide equal employment opportunities to all qualified persons without regard to race, gender, color, disability, national origin, age, religion, union affiliation, sexual orientation, veteran status, citizenship, gender identity and/or expression, or other status protected by law.

Job Description Video Test Engineer Broadata Communications, Inc. (BCI) – Torrance, CA On-site Company Overview Broadata Communications, Inc. (BCI) is a privately held California-based corporation. BCI is a leading and innovative company specializing in the development of market-driven products for the transmission of digital multimedia (video, audio, and data) over fiber. Our clients are world leaders in their industries, spanning entertainment, broadcast, medical, professional audio/video, house of worship, education, government, military, and transportation sectors. We are ISO 13485 and ISO 9001 certified, with a strong commitment to quality, innovation, and continuous improvement. Summary We are seeking a detail-oriented, Video Test Engineer. This role focuses on performing integration testing, validation and verification of new and existing products, while developing and maintaining the company’s processes, specifications, and procedures for product development, troubleshooting, and testing. This is a hands-on role in Product Development and Engineering, based in Torrance, CA, and is not a remote or hybrid position. We offer a fast-paced, high impact and stimulating environment with opportunities for professional growth within BCI. Veterans welcome! Key Responsibilities • Develop verification, validation, troubleshooting, and testing for the release and maintenance of BCI and third-party hardware, firmware and software used in high-performance digital multimedia products., • Design, develop and execute product and system test plans to create formal validation and verification, documentation, methods, and processes, design and build fixtures, automated test jigs, scripts, and demo and test systems., • Develop and perform formal validation and verification testing, including interoperability, safety, environmental, accelerated life cycle testing, pursuant to compliance certification to 60601., • Document and analyze test results, including product hardware, firmware, & software verification and validation, using both manual and automated testing as needed., • Conduct product failure resolution by analyzing failure reports, devising, and executing experiments to reproduce one or more failure modes, and systematically localizing root cause(s)., • Generate and review accurate and thorough technical content, including software/firmware requirements, design specifications, and test protocols., • Generate internal and external documentation such as datasheets, user manuals, test methods and processes, etc., • Contribute input to schedules and task breakdowns., • Contribute to organization of common and dedicated lab work benches, storage, mechanical tools, 3D printers, and electronics tools and supplies.Job responsibilities within our organization are dynamic. This may not be a complete list of duties. Other responsibilities and duties may be assigned by your supervisor or upper management. Education and Experience • B.S. in Electrical Engineering or a related field., • 3+ years of experience designing and/or testing of multimedia hardware and systems., • Basic electrical circuit and mechanical design knowledge sufficient for design of test fixtures including basic wiring and computer interfacing., • Experience executing test plans to create formal validation and verification documentation for multimedia hardware, firmware & software products., • Hands-on, demonstrable experience and working knowledge of most or all of the following:, • Experience with printed circuit board assembly and testing, cable harness production, and ESD control., • Multimedia test equipment such as Quantum Data, Audio Precision, PHABRIX, • Standard lab equipment such as oscilloscopes, logic analyzers, signal analyzers, signal generators, spectrum analyzers, etc., • Basic Python to understand and modify complex scripts and write simple scripts, • Experience with bug scrubbing, bug tracking, and bug tracking software, • Building test units, harnesses, and jigs using mechanical and electronic assembly, • Multidisciplinary bring-up and debugging techniques and approaches, • PC (Windows/Linux) and Ethernet network/ IP network setup and configuration, • High speed video interfaces and protocols (composite to 4K60, HDMI/DP/DVI, SDI, SDVOE, streaming, color spaces, standards and temperatures, and timing & synchronization)Skills & Abilities, • Solid Electrical Engineering background with the ability to read, understand, create, and edit multimedia PCB schematics, familiarity with basic FPGA/SoC/processors, memory systems, power subsystems including linear and switching topologies, and serial interfaces., • Strong team player who can work collaboratively with a diverse team to identify root cause of complex system problems, for both internally reported failures as well as customer RMAs, using Ishikawa/fishbone analysis to find effective, practical solutions quickly., • Detail-oriented effective communicator with excellent customer-ready documentation and communication skills and ability to develop, use, and socialize document templates to streamline processes., • Ability to provide completion time estimates for a given set of test requirements., • Ability to be hands-on with soldering, assembly, and testing., • Ability to work with very little supervision, prioritize between multiple tasks, meet aggressive deadlines, and work extended hours (as needed)., • Highly responsible and committed to thrive in an energetic, fast-paced, evolving, high growth environment while adhering to aggressive deadlines, and coordinating cross-functional teams., • Strong self-motivation and attitude for personal career growth, willingness to self-learn, and work in new technology domains.Compensation & Benefits, • Base Salary: $80,000 - $120,000 (depending on experience and qualifications), • Medical, vision and dental insurance, • 401(k) with company match (100% of the first 4% in eligible compensation), • Flexible Spending Account, • 2 weeks paid vacation, • 1 week sick pay, • 10 company holidays aHOCcuPbCi

Job Description Intellisense Systems, Inc. is a privately held company with a proven track record of developing and deploying innovative products that successfully operate in the most extreme environments. We are a fast-growing Southern California technology innovator that solves tough, mission-critical challenges for our customers in the aerospace, defense, and commercial markets. We design, develop, and manufacture advanced products for ground, maritime, and airborne applications. We are looking for an exceptional Principal Scientist to join our Airborne Technologies team. The team works on cutting-edge technologies to translate modern science achievements into practical developments and designs/ implementations for government customers and DoD applications. As part of the team, you will work alongside other experienced scientists and engineers to develop novel, cutting-edge solutions to several challenging problems. From creating experiments and prototyping implementations to designing new electro-optics/infrared (EO/IR) systems, you will contribute to transitioning your developments to software and hardware implementations and test your integrated solutions in accordance with project objectives, requirements, and schedules. This is a part-time position 24 hours per week onsite in Torrance, CA. Responsibilities: Technical Design & Development: • Formulate new solutions and write proposals to solve customer problems and lead those projects in a wide area of technological developments., • Design, develop, and implement novel Low SWaP-C devices/systems and applications., • Utilize advanced modeling and simulation tools to characterize and validate test results of designed systems/devices/components and other processing algorithm/systems developments to contribute to R&D programs., • Apply your experience and deep understanding of developing designs or prototypes that incorporate hardware (optical, electronics, mechanical) and software (preferably image processing and machine learning) components, • Work with government and non-government representatives to ensure the system integration and fielding requirements are understood and addressed., • Mentor and train junior colleagues, providing guidance and support to resolve technical challenges effectively, • Work closely with a multidisciplinary team of scientists and engineers to resolve issues related to the system, hardware, and software development., • Independently lead the writing and preparation of compelling bids and proposals, leveraging technical expertise to enhance win rates., • Lead and execute projects as a Principal Investigator (PI) or as a Program Manager (PM), ensuring adherence to timelines, budgets, and quality standards., • As a PI/PM oversee project planning, scheduling, resource allocation, and coordination of project activities., • PhD in Physics, Applied Physics, Solid State Physics, Electrical Engineering or related field, • 12+ years’ experience in sensor development, AL/ML., • Must demonstrate proficiency and knowledge in design, test, evaluation, and analysis of algorithms/ hardware prototypes., • Proven technical leadership skills: Identifies problems, anticipates challenges, and actively devises appropriate solutions., • Must be able to successfully contribute and lead multiple programs simultaneously, achieving required results on time and within budget, • Ability to present technical concepts and designs to Senior Management and customers., • Must have excellent technical writing, verbal communication, and presentation skills., • Takes initiative and exercises independent judgment in setting & executing goals., • Ability to plan and collaborate on work assignments with internal groups, collaborators and vendors., • Ability to make optimal trade-offs in own goals and resources (staff and budget) to help the company achieve its goals. Proactive and anticipates challenges., • US Citizenship is required Please note: Job responsibilities within our organization are dynamic. This may not be a complete list of duties. Other responsibilities and duties may be assigned by your supervisor or upper management at any time. Pay Range: $77-84hr. (However, base salary for this position will vary based on your skills, qualifications, and experience) The unique culture at Intellisense offers the entrepreneurial spirit of a smaller company with the support and expertise of a larger organization. We are looking for individuals that have a wide breadth of experience while also being subject matter experts in their respective field. With an immediate 40-hours of paid time off and 100% 401(k) matching up to 4% of your annual salary without a vesting period, we recognize that employees are our greatest resource and that finding the right individuals will make our company even better. If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please contact us by phone at 424-319-7813 or by email at Unless otherwise stated in the requirements section of an individual job listing, our positions require U.S. Citizenship, U.S. Permanent Residency, or other status as a U.S. Person as defined by 8 USC 1324b(a)(3). Intellisense Systems, Inc is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, veteran status, genetic data, or other legally protected status. 26020 Powered by JazzHR afyUD91pHb

Job DescriptionIntellisense Systems, Inc. is a privately held company with a proven track record of developing and deploying innovative products that successfully operate in the most extreme environments. We are a fast-growing Southern California technology innovator that solves tough, mission-critical challenges for our customers in the aerospace, defense, and commercial markets. We design, develop, and manufacture advanced products for airborne, ground, maritime, and emerging market applications. We are seeking a Director, Business Development. This is an excellent opportunity for an energetic “hands-on, get-it-done” individual to contribute to the development of business of the highest importance to the future growth of the Corporation. The Director, Business Development will report to the Corporate Vice President, Business Development and be responsible for all aspects of the business development/capture lifecycle, from opportunity creation/ identification through to award, including customer relationship, opportunity identification, proposal generation and overall customer satisfaction. The successful candidate will be an experienced professional that drives business growth across the Corporation focusing on a military service branch and associated Tier 1 system integrators. The successful candidate will present a proven track record of action management of technically complex programs and engineering tasks, which are essential skills for developing business utilizing cutting edge technologies. The candidate must quickly assume leadership responsibility for capturing large military programs as well as their eventual successful transition to program execution. This is an on-site role located in Torrance, CA. As Director, Business Development, Your Responsibilities Are: • Identification and capture of new business including Small Business Innovation Research transition with focus on year over year revenue growth., • Actively participate in the identification and process of potential business opportunities to align with Intellisense growth strategy., • Support strategic, long-range planning, market analysis and forecast data for DoD sector. Demonstrate a history of Identification and capture of new military and defense business opportunities, including relevant Small Business Innovation Research with focus on year over year revenue growth., • Lead capture and proposal team activities with a focus on customer requirements and budget, competitive intelligence and price-to-win analyses., • Conduct customer engagements and customer call planning with the purpose of establishing critical trust with senior leaders of assigned military service(s) and Primes., • Identification of strategic alliances, teammates and partners for key pursuit opportunities., • Participate in relevant trade shows, industry days and seminars to stay abreast of customer strategies, goals and objectives., • Lead capture and proposal writing activities with a focus on customer requirements, program management planning and budget, competitive intelligence and price-to-win analyses – how we win and why us., • Identify and pursue opportunities for Foreign Military Sales or DCS of existing products in compliance with current ITAR and US Export restrictions., • Will be required to travel up to 50%., • A minimum of an Engineering bachelor's degree in electrical engineering, computer science, or similar with 7+ years' experience in engineering., • 5+ years’ experience in Business Development with demonstrated results. Program management experience for avionics programs/systems., • Practical understanding of technology transitioning, product/market development, and marketing/product planning for US military applications., • Knowledge of conducting and directing competitive product analysis using market research techniques and a solid technical understanding of service/agency needs and requirements., • Must have superior proposal development/writing and basic contracting/negotiation skills., • Strong leadership skills, excellent communication (presentation, written, and verbal), and relationship building skills. Good problem-solving ability to work with a diverse work force., • Relevant experience in Mergers and Acquisitions (M&A) a plus., • Business degree is a plus., • Experience with AF and/or NAVAIR Programs and Platforms, • Former pilot is a plus, • Advanced degree is a plus, • The freedom to take risks, to innovate, and to be rewarded., • The ability to deliver products that are continually recognized as industry disruptors. $150,000-$215,000 + quarterly bonus However, base salary for this position will vary based on your skills, qualifications, and experience. Benefits: • 4 Weeks PTO a year (including 40 hours of PTO your first day), • 10 paid holidays, • 401(k) with 100% employer matching up to 4% of salary (no vesting period), • Multiple options for Medical, Vision, Dental Insurance plans, • Health Savings Accounts, • Flexible Spending Accounts, • Tuition Assistance (30% of Tuition with a minimum qualifying grade), • 100% Paid Employee Assistance Program (EAP), • 100% Paid Basic Life and AD&D Insurance, • 100% Paid Workers Compensation Insurance With an immediate 40-hours of paid time off and 100% 401(k) matching up to 4% of your annual salary without a vesting period, we recognize that employees are our greatest resource and that finding the right individuals will make our company even better. If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please contact us by phone at 424-319-7813 or by email at Unless otherwise stated in the requirements section of an individual job listing, our positions require U.S. Citizenship, U.S. Permanent Residency, or other status as a U.S. Person as defined by 8 USC 1324b(a)(3). Intellisense Systems, Inc is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, veteran status, genetic data, or other legally protected status. ZU 25023-A Powered by JazzHR ArmNUJ4zKC

Job Description POSITION SUMMARY: Engaged in variety of electrical test on magnetic parts, subassemblies, final verification of electrical requirements, and to ensure unit functions in accordance to drawing electrical specifications or to determine cause of unit failure. POSITION RESPONSIBILITIES: • Review manufacturing traveler instructions for electrical requirement., • Test single and three phase transformers and inductors in accordance with test specifications., • Ensure that all electrical measuring equipment such as digital voltmeter, frequency meter, Inductance Bridge, digital ohmmeter, auto-multiple tester, etc. are calibrated., • Ensure that each part conforms to drawing electrical requirements., • Perform pre-pot electrical verification prior to encapsulation parts., • Perform quality conformance inspection for all completed parts to verify conformance to specification., • Initiate a non-conformance report each time a part is found non-conformance to the requirement., • Maintain and clean areas around test equipment., • Lead daily testing of transformers and controls., • Ensure ongoing adherence to internal and external standards., • Troubleshoot and diagnose problems., • Utilize PC and necessary hand calculations to prepare files and forms for transformer test and draft Certified Test Reports., • Prepare detailed test plans for scheduled transformers based on input from the customer specification, test specification, nameplate, control drawings, standards, equipment instruction manuals and work instructions., • Interface with engineering as necessary for clarifications or to obtain additional information. Represent the test department in a professional manner., • Maintain & Repair test equipment as necessary. Ensure equipment is calibrated and schedule upcoming calibrations. Monitor condition of test equipment and test fixtures., • Recognize opportunities for improvement and take action., • Ensure engineering changes are acted upon as required and communicate non-conformances via quality assurance department., • Provide work leadership and train test technicians. Teach equipment setup, connections, principles of operation, maintenance, and diagnostics. This position has no supervisory responsibilities. MINIMUM REQUIREMENTS: High school diploma or general education degree (GED) six months of related experience or training or an equivalent combination of education and experience. • Must have the basic knowledge of transformer construction, testing and troubleshooting, • Must have the basic knowledge how to use various type of test equipment such digital multi-meter, ohmmeter, volt meter, wattmeters, megohmmeter, oscillators and power amplifiers., • Must be able to perform each essential duty satisfactorily., • Must have the mental and visual ability to read and interpret documents such as work instructions, schematic diagram, safety rules, operating and maintenance instructions and procedures manuals., • Must have the knowledge of basic electricity both alternating and direct current., • Must have the mental ability to perform basic mathematic., • Must have the physical ability to move parts weighing 25 pounds., • Ability to communicate effectively, work effectively in a team environment., • Ability to apply common sense understanding to carry out instructions furnished in written or oral This position is in contact with supervisor, production manager, and human resources. PHYSICAL EFFORT: This position may occasionally be required to lift up to 25 pounds. Must be able to remain in a stationary position 50%. Position needs to move about around the test area, and throughout production plant. The person in this position frequently communicates with Supervisor and production manager who have inquiries; therefore person must be able to exchange accurate information in these situations. The person will require the ability to read materials including safety policies and procedures. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. SAFETY: • Must have the physical ability to perform this job safely without endangering the health or safety of self or others., • Employees are required to wear Personal Protective Equipment (PPE) such as clothing, gloves, goggles, or other garments or equipment to protect the employee’s body from injury or infection., • Determines appropriate action beyond guidelines; Reports potentially unsafe conditions of equipment., • Ensure compliance with Magnetika employee health and wellbeing programs., • Inspect equipment, manufacturing area and safety equipment to find and correct potential hazards., • Ensure compliance with environmental and Occupational Safety and Health Administration (OSHA) regulations. Works throughout the premises as needed. Work environment may have noise levels ranging from medium to quiet. The environment for this position varies from clean, climate controlled to manufacturing. This job description portrays in general terms the type and level(s) of work performed and is not intended to be all-inclusive or to represent specific duties of any one incumbent. The knowledge, skills and abilities may be acquired through a combination of formal schooling, self-education, prior experience, or on-the-job training. The company reserves the rights to modify, supplement, delete, or augment the duties and responsibilities specified in the position description, in the company’s sole and absolute discretion. Duties other than those expressly specified may be assigned from time to time. Monday - Thursday 7:00 am - 3:30 pm, Friday 6:00 am - 2:30 pm

Job DescriptionIntellisense Systems, Inc. is a privately held company with a proven track record of developing and deploying innovative products that successfully operate in the most extreme environments. We are a fast-growing Southern California technology innovator that solves tough, mission-critical challenges for our customers in the aerospace, defense, and commercial markets. We design, develop, and manufacture advanced products for ground, maritime, and airborne applications. We are seeking an exceptional Senior Research Scientist with a strong EE/RF background to join the Advanced Systems Team in our Airborne Systems Department. The Advanced Systems Team works on advancing cutting-edge technology for integration into advanced systems and platforms. Their research and development effort is focused on products that leverage a combination of sophisticated algorithms onto embedded electronics including but not limited to RFICs, RFSoCs, SDRs, micro-controllers, and single board computers. We are a lean team that specializes in advancing concepts from proposed solution to technology production. You will work alongside other experienced scientists and engineers to develop novel, cutting-edge solutions to several challenging problems. Understanding and experience with RF systems such as radar and/or communications and the requisite systems design, implementation and application, signal and digital signal processing (algorithms and hardware) are desired. This is a hands-on research and development position. Responsibilities: • Write proposals such as SBIR/BAA etc., • Lead the creation of new concept/architecture design, development, and implementation activities related to RF sensing and processing components/systems development including simulation and modeling, prototyping, and testing., • Apply experience in the use of RF design, programming, modeling/simulation tools to help develop new technologies., • Work alongside engineering and research teams in researching, selecting, evaluating, and/or developing component/system and packaging with specific applications in mind., • Lead/provide technical write-ups related to system, hardware, and software development for bids and proposals., • PhD in Applied/Experimental Physics, RF Engineering, Electrical/Electronics Engineering, Computer Engineering, or related field., • 5-8+ years’ experience in RF and communication components/system design, development, laboratory and field prototyping and implementation for RF applications (including years of post-doctoral study.), • Experience using Ansys and microwave office, • Experience in radar algorithm development: Doppler processing, SAR, target classification, and AI/ML, • Good knowledge of analog and digital RF and communication systems and protocols., • Experience in developing hardware and prototyping, • Ability to contribute to development, analysis and troubleshooting of component/system performance., • Desire to design experiments, assemble test setups, perform tests, analyze results, relate the results to goals/theory/predictions and make conclusions relevant to development., • Ability to manage multiple programs simultaneously, achieving required results on time and on budget., • Ability to present technical concepts and designs to Senior Management and customers in clear and succinct form., • Excellent technical writing, verbal communication, and presentation skills to prepare technical proposals and documentation., • Familiarity with electronics and wireless communication (including mesh network) systems and devices, • Experience in cellular protocols, 5G stacks, and backhaul integration, • Experience in writing proposals, • Project planning and execution, • The freedom to take risks, to innovate, and to be rewarded, • Partner with trusting leadership that approaches tasks and requests with urgency $130,000-$180,000 However, base salary for this position will vary based on your skills, qualifications, and experience. Benefits: • 4 Weeks PTO a year (including 40 hours of PTO your first day), • 10 paid holidays, • 401(k) with 100% employer matching up to 4% of salary (no vesting period), • Multiple options for Medical, Vision, Dental Insurance plans, • Health Savings Accounts, • Flexible Spending Accounts, • Tuition Assistance (30% of Tuition with a minimum qualifying grade), • 100% Paid Employee Assistance Program (EAP), • 100% Paid Basic Life and AD&D Insurance, • 100% Paid Workers Compensation Insurance, • Voluntary Life Insurance The unique culture at Intellisense offers the entrepreneurial spirit of a smaller company with the support and expertise of a larger organization. We are looking for individuals that have a wide breadth of experience while also being subject matter experts in their respective field. With an immediate 40-hours of paid time off and 100% 401(k) matching up to 4% of your annual salary without a vesting period, we recognize that employees are our greatest resource and that finding the right individuals will make our company even better. If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please contact us by phone at 424-319-7813 or by email at Unless otherwise stated in the requirements section of an individual job listing, our positions require U.S. Citizenship, U.S. Permanent Residency, or other status as a U.S. Person as defined by 8 USC 1324b(a)(3). Intellisense Systems, Inc is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, veteran status, genetic data, or other legally protected status. WW 26012 Powered by JazzHR WWluxD1IMe

Job DescriptionIntellisense Systems, Inc. is a privately held company with a proven track record of developing and deploying innovative products that successfully operate in the most extreme environments. We are a fast-growing Southern California technology innovator that solves tough, mission-critical challenges for our customers in the aerospace, defense, and commercial markets. We design, develop, and manufacture advanced products for ground, maritime, and airborne applications. We are seeking an exceptional Senior Research Scientist with a strong EE/RF background to join the Advanced Systems Team in our Airborne Systems Department. The Advanced Systems Team works on advancing cutting-edge technology for integration into advanced systems and platforms. Their research and development effort is focused on products that leverage a combination of sophisticated algorithms onto embedded electronics including but not limited to RFICs, RFSoCs, SDRs, micro-controllers, and single board computers. We are a lean team that specializes in advancing concepts from proposed solution to technology production. You will work alongside other experienced scientists and engineers to develop novel, cutting-edge solutions to several challenging problems. Understanding and experience with RF systems such as radar and/or communications and the requisite systems design, implementation and application, signal and digital signal processing (algorithms and hardware) are desired. This is a hands-on research and development position. Responsibilities: • Write proposals such as SBIR/BAA etc., • Lead the creation of new concept/architecture design, development, and implementation activities related to RF sensing and processing components/systems development including simulation and modeling, prototyping, and testing., • Apply experience in the use of RF design, programming, modeling/simulation tools to help develop new technologies., • Work alongside engineering and research teams in researching, selecting, evaluating, and/or developing component/system and packaging with specific applications in mind., • Lead/provide technical write-ups related to system, hardware, and software development for bids and proposals., • PhD in Applied/Experimental Physics, RF Engineering, Electrical/Electronics Engineering, Computer Engineering, or related field., • 5-8+ years’ experience in RF and communication components/system design, development, laboratory and field prototyping and implementation for RF applications (including years of post-doctoral study.), • Experience using Ansys and microwave office, • Experience in radar algorithm development: Doppler processing, SAR, target classification, and AI/ML, • Good knowledge of analog and digital RF and communication systems and protocols., • Experience in developing hardware and prototyping, • Ability to contribute to development, analysis and troubleshooting of component/system performance., • Desire to design experiments, assemble test setups, perform tests, analyze results, relate the results to goals/theory/predictions and make conclusions relevant to development., • Ability to manage multiple programs simultaneously, achieving required results on time and on budget., • Ability to present technical concepts and designs to Senior Management and customers in clear and succinct form., • Excellent technical writing, verbal communication, and presentation skills to prepare technical proposals and documentation., • Familiarity with electronics and wireless communication (including mesh network) systems and devices, • Experience in cellular protocols, 5G stacks, and backhaul integration, • Experience in writing proposals, • Project planning and execution, • The freedom to take risks, to innovate, and to be rewarded, • Partner with trusting leadership that approaches tasks and requests with urgency $130,000-$180,000 However, base salary for this position will vary based on your skills, qualifications, and experience. Benefits: • 4 Weeks PTO a year (including 40 hours of PTO your first day), • 10 paid holidays, • 401(k) with 100% employer matching up to 4% of salary (no vesting period), • Multiple options for Medical, Vision, Dental Insurance plans, • Health Savings Accounts, • Flexible Spending Accounts, • Tuition Assistance (30% of Tuition with a minimum qualifying grade), • 100% Paid Employee Assistance Program (EAP), • 100% Paid Basic Life and AD&D Insurance, • 100% Paid Workers Compensation Insurance, • Voluntary Life Insurance The unique culture at Intellisense offers the entrepreneurial spirit of a smaller company with the support and expertise of a larger organization. We are looking for individuals that have a wide breadth of experience while also being subject matter experts in their respective field. With an immediate 40-hours of paid time off and 100% 401(k) matching up to 4% of your annual salary without a vesting period, we recognize that employees are our greatest resource and that finding the right individuals will make our company even better. If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please contact us by phone at 424-319-7813 or by email at Unless otherwise stated in the requirements section of an individual job listing, our positions require U.S. Citizenship, U.S. Permanent Residency, or other status as a U.S. Person as defined by 8 USC 1324b(a)(3). Intellisense Systems, Inc is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, veteran status, genetic data, or other legally protected status. WW 26012 Powered by JazzHR 2tGFoYcSvk

Job Description Associate Test Engineer Broadata Communications, Inc. (BCI) – Torrance, CA On-site Company Overview Broadata Communications, Inc. (BCI) is a privately held California-based corporation. BCI is a leading and innovative company specializing in the development of market-driven products for the transmission of digital multimedia (video, audio, and data) over fiber. Our clients are world leaders in their industries, spanning entertainment, broadcast, medical, professional audio/video, house of worship, education, government, military, and transportation sectors. We are ISO 13485 and ISO 9001 certified, with a strong commitment to quality, innovation, and continuous improvement. Summary We are seeking a detail-oriented Associate Test Engineer. This role focuses on performing integration testing, validation and verification of new and existing products, while developing and maintaining the company’s processes, specifications, and procedures for product development, troubleshooting, and testing. This is a hands-on role based in Torrance, CA, and is not a remote or hybrid position. We offer a fast-paced, high impact and stimulating environment with opportunities for professional growth within BCI. Veterans welcome! Key Responsibilities • Assist with the development verification, validation, troubleshooting, and testing for the release and maintenance of BCI and third-party hardware, firmware and software used in high-performance digital multimedia products., • Assist with the design, develop and execute product and system test plans to create formal validation and verification, documentation, methods, and processes, design and build fixtures, automated test jigs, scripts, and demo and test systems., • Assist with the development and perform formal validation and verification testing, including interoperability, safety, environmental, accelerated life cycle testing, pursuant to compliance certification to 60601., • Document and analyze test results, including product hardware, firmware, & software verification and validation, using both manual and automated testing as needed., • Conduct product failure resolution by analyzing failure reports, devising, and executing experiments to reproduce one or more failure modes, and systematically localizing root cause(s)., • Generate and review accurate and thorough technical content, including software/firmware requirements, design specifications, and test protocols., • Generate internal and external documentation such as datasheets, user manuals, test methods and processes, etc., • Contribute input to schedules and task breakdowns., • Contribute to organization of common and dedicated lab work benches, storage, mechanical tools, 3D printers, and electronics tools and supplies.Job responsibilities within our organization are dynamic. This may not be a complete list of duties. Other responsibilities and duties may be assigned by your supervisor or upper management. Education & Experience • B.S. in Electrical Engineering or a related field., • 1-3 years of experience designing and/or testing multimedia hardware and systems., • Basic electrical circuit and mechanical design knowledge sufficient for design of test fixtures including basic wiring and computer interfacing., • Experience executing test plans to create formal validation and verification documentation for multimedia hardware, firmware & software products., • Hands-on, demonstrable experience and working knowledge of most or all of the following:, • Experience with printed circuit board assembly and testing, cable harness production, and ESD control., • Multimedia test equipment such as Quantum Data, Audio Precision, PHABRIX, • Standard lab equipment such as oscilloscopes, logic analyzers, signal analyzers, signal generators, spectrum analyzers, etc., • Basic Python to understand and modify complex scripts and write simple scripts, • Experience with bug scrubbing, bug tracking, and bug tracking software, • Building test units, harnesses, and jigs using mechanical and electronic assembly, • Multidisciplinary bring-up and debugging techniques and approaches, • PC (Windows/Linux) and Ethernet network/ IP network setup and configuration, • High speed video interfaces and protocols (composite to 4K60, HDMI/DP/DVI, SDI, SDVOE, streaming, color spaces, standards and temperatures, and timing & synchronization)Skills & Abilities, • Solid Electrical Engineering background with the ability to read, understand, create, and edit multimedia PCB schematics, familiarity with basic FPGA/SoC/processors, memory systems, power subsystems including linear and switching topologies, and serial interfaces., • Strong team player who can work collaboratively with a diverse team to identify root cause of complex system problems, for both internally reported failures as well as customer RMAs, using Ishikawa/fishbone analysis to find effective, practical solutions quickly., • Detail-oriented effective communicator with excellent customer-ready documentation and communication skills and ability to develop, use, and socialize document templates to streamline processes., • Ability to provide completion time estimates for a given set of test requirements., • Ability to be hands-on with soldering, assembly, and testing., • Ability to work with very little supervision, prioritize between multiple tasks, meet aggressive deadlines, and work extended hours (as needed)., • Highly responsible and committed to thrive in an energetic, fast-paced, evolving, high growth environment while adhering to aggressive deadlines, and coordinating cross-functional teams., • Strong self-motivation and attitude for personal career growth, willingness to self-learn, and work in new technology domains.Compensation & Benefits, • Salary: $75,000 - $100,000 annual base salary (based on experience and qualification), • Medical, vision and dental insurance, • 401(k) with company match (100% of the first 4% in eligible compensation), • Flexible Spending Account, • 2 weeks paid vacation, • 1 Week sick pay, • 10 company holidays x3DjWSrEU6

Be visionary Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. Job Description Teledyne Relays (a business unit of Teledyne Defense Electronics, LLC) is a manufacturer of Electromechanical Relays, Solid State Relays, Power Controllers, RF COAX Switches and RF Matrix switching systems. The primary manufacturing facilities are located in the United States. We are a vertically orientated manufacturing and design company with major operations in Southern California. Teledyne Relays' mission, vision, and value statements have never really changed in principle since 1963. Dedication to every employee and client's success; Innovation that matters - for our company and for the world; Trust and personal responsibility in all relationships - Teledyne Relays is EveryWhereYouLook! This is a full-time on-site Quality Inspector role located in Hawthorne, CA. The Quality Inspector will be responsible for conducting quality control and assurance checks, managing quality processes, performing inspections, and utilizing analytical skills to ensure product integrity. Essential Functions: • Interpreting technical drawings and specifications to ensure piece parts and products meet drawing requirements\n, • Utilizing work instructions to collect data, Complete inspection reports, history logs, rejection reports and associated paperwork\n\n, • Receiving, In-process & Final inspections for compliance to drawing/ requirements.\n, • Must have good eye-hand coordination/dexterity to assemble small parts (plug relays into equipment for testing).\n, • Must be able to work with small parts, work well with a microscope and be able to use hand tools (tweezers, pin vise) and equipment as instructed.\n, • Must have good oral and written communications skills to keep Lead/Supervisor informed of progress or issues, and for documentation.\n\n Basic Qualifications: • Requires a High School Diploma or equivalent (GED) and a minimum of 6 years of prior relevant experience or 2 years post Secondary/Associates Degree with a minimum of 2 years of prior related experience. Must have basic computer skills to make daily data entries.\n Preferred Additional Skills: \n • Intermediate understanding of GD&T. \n, • Proficiency in using precision measurement tools. \n, • Experience in inspection or testing of electrical, electromechanical or mechanical product.\n, • Knowledge of aerospace manufacturing processes and materials.\n, • Attention to detail and accuracy in documentation. \n, • Completing first article inspections (FAIs) per AS9102.\n, • Ability to work in a fast-paced environment and meet deadlines. \n, • Strong problem-solving and ability to create manual approaches to measuring.\n Due to the type of work at the facility and certain access restrictions, successful applicants must be a "US Person" (US Citizens, US Nationals, lawful permanent residents, asylees or refugees). Salary Range: $44,500.00-$59,300.000 Pay Transparency The anticipated salary range listed for this role is only an estimate. Actual compensation for successful candidates is carefully determined based on several factors including, but not limited to, location, education/training, work experience, key skills, and type of position. Teledyne conducts background checks on qualified applicants who receive a conditional offer of employment in accordance with applicable laws, regulations and ordinances. Background checks may include, but are not limited to, education verification, employment history and verification, criminal convictions, Motor Vehicle Report (MVR & driving history), reference check, credit checks/credit history and drug testing. All qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws.

Location(s): Compton, CA, US, 90222 Function: Manufacturing Audience: Hourly Work Arrangement: On Site Requisition ID: 68483 Job Title: Instrumentation Technician Department: Compton Maintenance Department PURPOSE OF THE JOB Instrumentation Technician coordinates and executes maintenance electrical functions safely in the facility to ensure that plant equipment and services perform at maximum levels while minimizing unscheduled interruption of the plant operation. Additionally, this individual is also responsible for training, coaching, teaching and counseling otherson electrical maintenance procedures and best practices. Strong skills in planning, organizing, knowledge of programmable logic controllers, electrical systems, and process control systems is required. This position reports to the plant Maintenance Supervisor. The base salary for this position is $56.74/hourly. We also offer a substantial benefits package including insurance (medical/dental/vision/life/disability/supplemental offerings), 401k (company contribution regardless of employee participation - plus match), paid time off (vacation, standard holidays), Employee Assistance Services, Stock Purchase Program - and more. JOB RESPONSIBILITIES Safety • Lives the Owens Corning Safety Stand and meets all safety requirements. Safety is a condition of employment., • Follows the plant safety process and ensures that good safety habits are instilled in the maintenance team., • Maintains an awareness of all safety issues within area of responsibility, and responds with appropriate urgency to correct safety issues identified., • Designs program safety into the electrical systems., • Partners with key stakeholders on capital projects to understand and educate others on the safety of equipment, • Ensures operation of machinery and electrical equipment by completing preventive maintenance requirements on drives, backup power systems, motors, pneumatic tools, conveyor systems, and other electrical related systems; following diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications, • Maintains electrical control software in support of programming for the facility, • Programs HMIs, PLCs, Servos, and other electrical systems, • Makes timely and appropriate decisions when an emergency or breakdown occurs so that production interruption is minimized, • For equipment or processes where maintenance costs are high, where reliability is low, or where chronic problems exist, performs additional analysis to identify appropriate maintenance practices (e.g., Root Cause Failure Analysis, Failure Modes and Effects Analysis, Reliability-centered maintenance analysis)., • Diagnoses electrical problems and determines how to correct them, checking schematics, repair manuals, and parts catalogs as necessary, • Uses PLC, computer interfaces for troubleshooting as needed, • Uses the manufacturing communications network effectively, • Proactively makes suggestions/proposals to strive for continuous improvement of plant performance., • Demonstrates flexibility to perform various job roles within the maintenance department as assigned., • Responds to emergency maintenance service requests accordingly, • Instructs maintenance team members on proper electrical installation and repair techniques as appropriate, • Coordinates contract electrical installations or repairs in the facility, • Inspects electrical work in progress to ensure correct labor utilization and evaluate electrical training requirements, • Provides direction for downtime and shop work for electrical activities with respect to work requests, downtime lists and assigned projects, • Trains, coaches, and counsels otherson electrical maintenance procedures, required trainings and best practices, • Recommends to the Maintenance Leader training and development of others in support of plant electrical power and control equipment, • Maintains technical knowledge by attending educational workshops; reviewing technical publications; establishing professional and intercompany networks, • Accountable for keeping the Maintenance Leader appraised of electrical equipment conditions so that situations of major significance can be planned for to avoid major production downtime, • Prepares electrical maintenance reports by collecting, analyzing, and summarizing information and trends, • Coordinates and executes maintenance electrical functions in the facility so the plant equipment and services perform at maximum levels and minimize unscheduled interruption of the plant operation, • Provides technical information to support planned electrical preventive maintenance to minimize production downtime, • Tracks electrical maintenance costs and failures, • Specifies electricalparts, supplies, and equipment from catalogs and suppliers, or obtains them from storerooms, • Defines electrical spare parts needs, such that inventories are maintained at appropriate levels, • Plans and lays out repair work, using diagrams, drawings, maintenance manuals, and schematic diagrams, • For planned new equipment purchases and installations where no maintenance history exists, applies maintenance and repair "best practices" to assure maximum reliability, • Designs and installs electrical and process control systems, • Proactively assesses and identifies obsolete parts on critical equipment and identifies optimal solutions to correct issues. JOB REQUIREMENTS EDUCATION AND EXPERIENCE • Two year Associates degree in technical related field preferred; Associates degree in electrical technology is a plus, • 3 years or more of relevant industrial electrical maintenance experience preferred, • Must be 18 years or older, • Must be a US citizen or have the right to work in the US, • Must be drug and alcohol free KNOWLEDGE, SKILLS & ABILITIES • Must read, write, and speak English, • Must understand verbal and written instructions, • Must possess strong communication and organizational skills, • Must multi-task, • Must have strong internal and external customer service skills, • Must secure and maintain job related qualifications and certifications as required by the nature of this position, • Programmable Logic Controllers: PLC components, I/O Systems, instructions, PLC programming, communication protocols, drivers, power supplies, expansion/retrofits, and system development (Allen Bradley Suite preferred), • Electrical Systems: servos, variable frequency drives, measuring systems, DC circuits, batteries, transformers, AC circuits, DC equipment/controls, three-phase systems, wiring, DC shunt motors, control relays, across-the-line starters, limit switches, electronic switching and electrical energy and power relationships, • Process Control Systems: speed and rotation sensors, human machine interfaces, control loop operations, data transmission, PID controller/loop tuning, final control elements, process modeling, instrumentation, measurement level detectors, and transducers, • Electrical Maintenance: voltmeters, ammeters, wattmeters, digital meters; schematics and symbols; short circuits, reversible motors, current probes, and relays, • Safety: First aid for shock victims, National Electrical Code, static electricity, grounding, double-insulated tools, National Fire Protection Association (NFPA) - 70e, and hazardous electrical locations, • Electronics: Analog and digital devices, • Mechanical Systems: Pneumatic control systems, air-piloted valves, and hydraulics Skills: • Troubleshooting/Equipment Selection: Determine causes of operating errors and determine appropriate course of action, • Complex Problem Solving: Identify complex problems and reviewing related information to develop and evaluate options and implement solutions, • Systems Analysis: Determine how a system should work and how changes in conditions, operations, and the environment will affect outcomes, • Installation: Install equipment, machines, wiring, or programs to meet specifications, • Equipment Maintenance: Performing routine and preventative maintenance on equipment, • Decision Making:Gather, analyze and interpret information to understand problems and identifyand opportunities; draw conclusions and generates alternatives; chooses a course of action based on facts; and ensures buy-in and understanding of the resulting decisions, • Self-Knowledge: Demonstrate a strong self-awareness of one's strengths, development needs and the impact of one's own behavior on others; and consistently takes action to be better, • Teamwork: Work effectively and cooperatively with others; establishes and maintains good working relationships, • Persistence: Persistence in dealing with obstacles, • Stress Tolerance: Accepting criticism and dealing calmly and effectively with high stress situations, • Independence:Guiding oneself with little or no supervision, and depending on oneself to get things done, • Mathematical Reasoning: To choose the right mathematical methods or formulas to solve a problem, • Adaptability: Being open to change and to considerable variety in the workplace ADDITIONAL REQUIRED TRAINING • All annual safety and role specific training, as required by the nature of this position ESSENTIAL PHYSICAL REQUIREMENTS • Stand for extended, prolonged periods, • Work overtime as needed, • Meet the physical demands of the work environment This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, and abilities. This document does not create an employment contract, implied or otherwise, other than an "at will" relationship. Background Check:Owens Corning is a Fair Chance employer and will consider all qualified applicants, including those with criminal histories. Except as otherwise permissible under applicable laws, you will not be asked to provide information about a conviction history unless you receive a conditional offer of employment. We will make a written individualized assessment of whether your conviction history has a direct or adverse relationship with the specific duties of the job, and will also consider potential mitigating factors, including, but not limited to, evidence and extent of rehabilitation, recency of the offense(s), and age at the time of the offense(s). If asked to provide information about a conviction history, any convictions or court records which are exempted by a valid court order do not have to be disclosed. About Owens Corning Owens Corning is a residential and commercial building products leader committed to building a sustainable future through material innovation. Our products provide durable, sustainable, energy-efficient solutions that leverage our unique capabilities and market-leading positions to help our customers win and grow. We are global in scope, human in scale with more than 25,000 employees in 31 countries dedicated to generating value for our customers and shareholders and making a difference in the communities where we work and live. Founded in 1938 and based in Toledo, Ohio, USA, Owens Corning posted 2024 sales of $11.0 billion. For more information, visit . Owens Corning is an equal opportunity employer. Except in limited circumstances such as formal apprenticeship programs, Owens Corning does not employ anyone under the age of 18. Nearest Major Market: Los Angeles

In the absence of the Maintenance Supervisor, the Maintenance Manager will assume plant responsibility under the leadership and guidance of the Plant Manager. Five to ten years' experience in plant machinery and equipment maintenance, including preventive maintenance programs, electrical, mechanical

The Electrical Supervisor is an important role and directly impacts the foundation of the Hawthorne site. Knowledge of electrical safe work practices – NFPA 70-E Electrical Safety Standard. Supervisor, Electrical: $110,000.

Supervisor, Avionics Manufacturing Department: Avionics Employment Type: Full Time Location: Redondo Beach Reporting To: Alexander Hsing Compensation: $115,000 - $155,000 / year Description As the Avionics Manufacturing Supervisor at Impulse, you will hire, manage, and mentor avionics manufacturing technicians to support avionics hardware builds for Impulse's vehicles. You will support manufacturing hardware ranging from PCB assembly (staking, conformal coating, underfill, soldering), harnessing, star trackers, batteries, mechanical assembly, and hardware integration. You will work directly with leaders and individual contributors in other disciplines. You will have the opportunity to contribute to all aspects of avionics development. Responsibilities • Hire and mentor avionics manufacturing technicians, • Provide production coordination by driving manufacturing schedule and providing day-to-day support for the production floor, resolving build issues, updating work instructions, and improving yields, • Collaborate with design engineers, manufacturing engineers and quality teams to ensure manufacturability, DFM/DFA compliance, and long-term reliability, • Set daily and weekly production targets, backed by performance metrics, • Develop, document, and optimize manufacturing processes for avionics., • Establish and maintain high technical standards through specifications and training, • High school diploma, or equivalency certificate, • 5+ years professional experience manufacturing electrical and optical hardware, • Demonstrated experience building, managing and developing a manufacturing team, • Experience with the production of PCB assemblies., • Bachelor's degree in Mechanical Engineering, Electrical Engineering, Aerospace Engineering or related field, • Experience managing a non-exempt workforce, • 5+ years of demonstrated experience manufacturing for space environments beyond LEO, • Experience in a startup or agile development environment Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionDescription Applies research theories, principles, statistics, and models when conducting experiments and research activities. Summarizes research results and communicates findings to internal and external bodies. Assesses the scope of research projects and ensures projects are on time and within budget. Develops technical documentation for all projects and institutional knowledge. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Researches and analyzes data such as specifications, and industry standards to determine feasibility of application, • Develops and carries out test plans, supervises process trials internally or at outside laboratories., • Designs or develops new products, systems, and test procedures., • Evaluate equipment and processes to ensure compliance with safety and environmental regulations, • Prepares requirement and procedural documentation as required., • Devises new processes, or refines existing ones, to optimize the manufacturing process, • Works with engineering and shop personnel in fabrication of prototype products and development of methods and procedures for testing products., • Report immediately all suspicious and hazardous conditions to a supervisor., • Understand and observe all safety guidelines and assure quality and safety by complying with all appropriate CB policies and procedures., • Assist in maintaining clean, orderly and hazard-free work areas., • Able to work with minimal supervision, be a self-starter and be detail oriented., • Other duties as assigned. Qualifications To perform this job successfully, an individual must be able to demonstrate the following competencies: • Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations., • Ability to write reports, business correspondence, test plans, and procedure manuals., • Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the public., • Ability to apply advanced mathematical concepts such as exponents, logarithms, quadratic equations, and permutations., • Ability to apply mathematical operations to such tasks as frequency distribution, determination of test reliability and validity, analysis of variance, correlation techniques, sampling theory, and factor analysis., • Ability to define problems, collect data, establish facts, and draw valid conclusions., • Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables., • Ability to write and read English EDUCATION AND/OR EXPERIENCE: • Bachelor’s in Science in Engineering, or closely related field., • Five years prior experience in a related field, industry, or work environment is required., • Skills and experience to develop test procedures., • Experience in developing product requirements and documentation., • Experience in coatings synthesis, characterization, and application testing., • This is not a supervisory position. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of this job, the employee is frequently required to stand; use hands to finger, handle, or feel; and reach with hands and arms., • Occasionally required to walk and sit., • Required to work with various chemicals, adhesives, and composites., • Must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds., • Work primarily performed in a standard office environment. If in manufacturing areas, requires protective eyewear and/or hearing protection. WORK ENVIRONMENT: • While performing the duties of this job, the employee may be exposed to moving mechanical parts., • Occasionally exposed to fumes or airborne particles, toxic or caustic chemicals, and risk of electrical shock., • Travel as required.

Job DescriptionLocation: Residence Inn by Marriott - Redondo BeachJOB SUMMARY Under general direction, the Engineering Supervisor oversees the daily operation and maintenance of hotel facilities, ensuring all mechanical, electrical, and safety systems function efficiently. This role leads a team of engineers and technicians, coordinates repairs and preventative maintenance, and ensures compliance with safety and brand standards. ESSENTIAL JOB FUNCTIONS • Interacts with guests in a professional and courteous manner; promptly addresses any questions or concerns they may have and follows up to ensure guest satisfaction., • Schedules, trains and directs work of Engineering/Maintenance technicians; assigns daily tasks and ensures work is completed efficiently and safely., • Oversees and assists with repairs to mechanical systems, guest room issues, or emergency maintenance situations., • Oversees work ticket process in Quore., • Conducts routine inspections of plumbing, electrical and mechanical systems, and elevators., • Oversees preventive maintenance programs in Quore to minimize equipment downtime and extend asset life., • Maintains accurate logs of maintenance activities, inspections, and repairs., • Ensures all systems and operations meet local building codes, health and safety regulations, and brand standards., • Works with outside contractors or service providers when specialized repairs or upgrades are needed., • Ensures all fire and safety inspections are completed and any discrepancies are corrected., • Supports leadership in maintaining adequate inventory of tools and supplies, including conducting tool inventories, monitoring stock levels, and placing orders with approved vendors as needed., • Maintains working spaces in safe and clean condition., • Attendance is a key component of this position., • Maintains a professional appearance in accordance with Company standards; wears the appropriate uniform or attire., • Maintains open and effective communication with team members and management., • Attends and participates in team meetings., • Adheres to established safety and emergency procedures and protocols, this includes Company, federal, and state specific regulations and guidelines., • Completes all required Company training/compliance courses as assigned., • Adheres to Company standards and maintains compliance with all policies and procedures., • Performs other related duties and responsibilities as assigned.EDUCATION, • High school diploma or equivalent.EXPERIENCE Specific supervisory duties include, but are not limited to the following: • Assigns, monitors, and reviews work., • Orientates and trains., • Creates department work schedules., • Ability to adjust effectively to evolving work environments and shifting customer (internal/external) requirements., • Able to maintain a positive and professional working environment., • Fosters a culture of excellence., • Able to work effectively in a culturally diverse environment and support diversity and inclusion within the organization., • Proficient in time management; the ability to effectively organize and manage multiple priorities., • Recognizes an emergency situation and takes appropriate action., • Emotional intelligence and interpersonal skills, with the ability to build strong working relationships with team members at all levels., • Skilled in building and motivating a team, fostering a collaborative environment and inspiring high performance., • Analytical and problem-solving skills., • Strong focus on accuracy and precision., • Ability to work scheduled shifts, follow all timekeeping policies, and comply with federal, state, and local labor regulations, including those related to meal and rest breaks, • Performs well with frequent interruptions and/or distractions., • Ability to interpret and create policies, procedures, and manuals., • Able to communicate appropriately and effectively with all levels of management and external stakeholders., • Ability to effectively listen, understand, and resolve challenges and concerns from management, team members, and/or customers (internal/external)., • Knowledge of key industry trends, best practices, regulations, and the current industry landscape., • Able to engage diplomatically and effectively with third party operators and owners, empathizing, and reacting appropriately to partner feedback and helping resolve issues where necessary., • Basic math skills., • Basic knowledge of Google Docs/Microsoft Word., • Basic knowledge of Google Sheets/Microsoft Excel. The Essential Job Functions, Physical Requirements, and Work Environment characteristics outlined are intended to reflect the requirements needed to perform the essential functions of this role effectively. Management retains the authority to modify, adjust, or revoke job duties and responsibilities as needed, and to make reasonable accommodations to enable qualified team members to fulfill the essential functions of their roles. The Company is an Equal Employment Opportunity (EEO) employer and is committed to providing a work environment free from discrimination and harassment. All employment decisions are made based on merit, qualifications, and business needs without regard to race, color, religion, sex, national origin, age, disability, sexual orientation, gender identity, or any other protected status/characteristic in accordance with applicable federal, state, and local laws. Job Posted by ApplicantPro

Job DescriptionIntellisense Systems, Inc. is a privately held company with a proven track record of developing and deploying innovative products that successfully operate in the most extreme environments. We are a fast-growing Southern California technology innovator that solves tough, mission-critical challenges for our customers in the aerospace, defense, and commercial markets. We design, develop, and manufacture advanced products for ground, maritime, and airborne applications. We are seeking an exceptional Electronics Assembler II for our Operations Department. The successful candidate will have advanced electronics and mechanical manufacturing experience and will be proficient in soldering, mechanical assembly, and epoxy potting. The successful candidate will be responsible for assembly of an advanced electro-mechanical product to AS9100 standards. This is an on-site role located in Torrance, CA. Responsibilities: • Perform precision hand soldering of electronic components (SMT, through-hole, and harnessing) in accordance with IPC-A-610 and J-STD-001 standards., • Assemble complex electro-mechanical systems, including PCB assemblies, cable harnesses, and subassemblies, using detailed drawings, schematics, and work instructions., • Support prototype builds by interpreting engineering documentation, identifying issues, and providing feedback to improve manufacturability., • Execute production assembly and in-process inspection to ensure compliance with quality standards and customer requirements., • Perform epoxy potting, bonding, and conformal coating processes as required., • Maintain accurate material control, traceability, and inventory records in compliance with AS9100 procedures., • Collaborate cross-functionally with Engineering, Quality Assurance, and Purchasing to resolve technical issues, material discrepancies, and ensure on-time delivery., • Interface with other departments to support material validation, workmanship standards, and part conformance., • Train and mentor team members on soldering techniques, workmanship standards, and best practices., • Identify assembly issues, nonconformances, and opportunities for process improvement; escalate as needed., • Maintain ESD compliance and proper handling of sensitive and optical components., • Ensure a clean, organized, and safe work environment in accordance with company standards., • Associate degree in Electronics with 4-5 years of experience or vocational training with 6-8 years of experience, • 6-8 years in high-tech manufacturing/production environment, • Experience with printed circuit board assembly, electrical harness production, ESD control, and handling optical components are a plus., • Good soldering skills (SMT, through-hole, and harnessing)., • Good understanding of soldering work standards (IPC-A-610/J-STD-001)., • Must be capable of following assembly procedures and drawings to perform mechanical system integration, as well as follow test procedures to perform functional testing. Technical Skills • Strong soldering capability (SMT, through-hole, fine-pitch, and harnessing)., • Solid understanding of IPC-A-610 and J-STD-001 standards (current certification preferred)., • Ability to read and interpret engineering drawings, schematics, BOMs, and work instructions., • Experience performing functional testing and following detailed test procedures., • Strong communication skills with the ability to work cross-functionally., • Ability to work independently with minimal supervision on complex tasks., • Strong sense of ownership, accountability, and quality focus., • Ability to meet deadlines in a fast-paced, high-reliability manufacturing environment., • Excellent technical report writing skills Please note: Job responsibilities within our organization are dynamic. This may not be a complete list of duties. Other responsibilities and duties may be assigned by your supervisor or upper management at any time. Pay Range: $30-36hr. Base salary for this position will vary based on your skills, qualifications, and experience. Benefits: • 4 Weeks PTO a year (including 40 hours of PTO your first day), • 10 paid holidays, • 401(k) with 100% employer matching up to 4% of salary (no vesting period), • Multiple options for Medical, Vision, Dental Insurance plans, • Health Savings Accounts, • Flexible Spending Accounts, • Tuition Assistance (30% of Tuition with a minimum qualifying grade), • 100% Paid Employee Assistance Program (EAP), • 100% Paid Basic Life and AD&D Insurance, • 100% Paid Workers Compensation Insurance, • Voluntary Life Insurance The unique culture at Intellisense offers the entrepreneurial spirit of a smaller company with the support and expertise of a larger organization. We are looking for individuals that have a wide breadth of experience while also being subject matter experts in their respective field. With an immediate 40-hours of paid time off and 100% 401(k) matching up to 4% of your annual salary without a vesting period, we recognize that employees are our greatest resource and that finding the right individuals will make our company even better. If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please contact us by phone at 424-319-7813 or by email at Unless otherwise stated in the requirements section of an individual job listing, our positions require U.S. Citizenship, U.S. Permanent Residency, or other status as a U.S. Person as defined by 8 USC 1324b(a)(3). Intellisense Systems, Inc is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, veteran status, genetic data, or other legally protected status. Powered by JazzHR 1t7YXJtsfa

Sares Regis Group is seeking an experienced Maintenance Supervisor for our beautiful 77-unit community, Tribeca Urban! This is an excellent opportunity in a beautiful location for someone looking to grow their career in the property management industry!. The Maintenance Supervisor is responsible for

Coordinate and attend meetings with clients and other stakeholders to review to review schedule and progress Coordinate with Construction Manager, Field Superintendent, General Foreman, Foremen and Project Manager, to provide schedule and progress updates About You: Qualifications Possess a minimum

ImageFIRST - - Responsibilities: Responsible for the installation, maintenance, troubleshooting, and repair of facility machinery; Perform preventative and predictive maintenance on facility machinery; Troubleshoot and repair facility machinery; Program PLC's; Provide on-the-job training to new emp

Trillium Staffing - - Responsibilities: Install 3-phase electrical panels; Pull and terminate wire; Install and run PVC conduit for EV charging systems; Assist with outdoor and underground electrical installations; Install underground and outdoor EV charging systems.

Knowledge of electrical wiring practices and logic controllers is advantageous. Utilize measuring instruments such as calipers and ohmmeters to verify dimensions and electrical properties. Perform electrical wiring tasks, including connecting logic controllers and other electronic devices.

CCL Industries - - Responsibilities: Perform maintenance and repair of plant equipment during night shifts to maximize production quantity and quality, and support company objectives.

Staff Management SMX - - Responsibilities: Troubleshoots and diagnoses all maintenance failures; Uses assembly drawings, P&IDs and manuals to tune equipment for operation, uses electrical (VFDs, SCRs, motor starters) and logic (PLC, SLC) principles to solve equipment problems; Trains new Associates

Under general supervision, installs, maintains and repairs a variety of electrical systems and equipment; works on heating and air conditioning systems; performs related duties as required.

Construction Project Manager – Water/Wastewater.LOA (for travel roles) + comprehensive benefits.Multiple office locations across CA, CO, and ID.Construction Project Managers (PMs and Sr.These roles are available in two primary formats:.Supporting regional and local projects out of one of our estab

ONLY ON CONTRACT W2, NO C2C/1099 ***.Location: Torrence, CA (4 Days onsite and 1 Day remote)-.Oversee the entire Product lifecycle from project initiation to feature delivery.Requirements, specifications, solutions, design, develop, test, and deploy.Manage post-deployment phases and project closure.

Electrical Construction Project Engineer. Are you ready to take the next step in your electrical construction career? As a Project Engineer, you’ll play a key role in delivering complex and meaningful projects across commercial, institutional, and industrial sectors. Review electrical drawings and

Chemical Guys is a fast-growing brand at the intersection of automotive care, creativity, and community.Born in Southern California, we've built a company that brings car culture together with design, innovation, and lifestyle — creating products that people are proud to use and even prouder to sh

Provides courteous, professional back office support to our patients, physicians and staff.Providence caregivers are not simply valued - they're invaluable.Join our team at Providence Saint John's Medical Foundation and thrive in our culture of patient-focused, whole-person care built on understandi

A top-performing, billion-dollar general contractor and key partner of Foster Lawson are seeking an experienced Project Manager to join their team in the San Francisco Bay Area.This would be a great opportunity to play a key role in delivering large-scale construction projects.Offering a strong comp

We need an Electrical Engineer who can own a wide surface area of electromechanical hardware. Perform electrical simulations (SPICE, MATLAB/Simulink) to optimize performance before you build. BS or MS in Electrical Engineering, Power Electronics, or related field.

DMF is looking for a recent Electrical Engineering graduate with a passion for electronics and circuit design to join our new product development team. Support the Electrical Engineering team in the design and qualification of compact LED drivers incorporating switch mode power supplies and associat

Report any issues or defects to the production lead/supervisor immediately.

By nurturing a culture where everyone experiences a deep sense of belonging and equity of opportunity, we will uphold our vision to “unleash human and business potential.We commit to being an anti-ism workplace and embedding diversity, equity, and inclusion throughout our business.Project Manager

InnoActive Group are leaders in providing project management and technology advisory primarily in public agencies and Fortune 500 entities.InnoActive Group has managed various construction and technology projects ranging in size from small projects to multi-billion-dollar capital programs.We are see

The ideal candidate will be responsible for planning, coordinating, and implementing projects within the decided-upon budget, timeline, and scope.They will also effectively monitor and present project updates to relevant stakeholders, clients, or project team members.Update relevant stakeholders or

Sports Research has an exciting opportunity for a highly organized, results-driven, and process-minded.This role is critical in ensuring marketing and creative projects are delivered on time, on budget, and with excellence—serving as the connective tissue across internal teams (Marketing, Creative