Entry level insurance jobs in Edison, New JerseyCreate job alerts

Physical Therapist - Pelvic Floor Specialist Adult Outpatient Therapy The Physical Therapist - Pelvic Floor Specialist will: • Develop proper therapeutic treatment plan of care and anticipated outcome for each patient in accordance with a written and signed Physician's order or prescription, as appropriate to the ages of the patients growth and development through the life cycle factors, • Modify treatment plan based on patient response and/or ineffectiveness as noted in the medical record., • Demonstrate effective teaching skills with patients/family members/caregivers and maintains safety and care of the patient during treatment sessions, • Assist in discharge planning of patients along with other members of the health care team, • Document initial assessments, reassessments and progress notes for each patient in accordance with established department policy and procedures Requirements: • Requires a Bachelor's, Master's degree or DPT, graduate of an entry level masters or doctorate program in Physical Therapy from a college or university accredited by Commission on Accreditation in Physical Therapy Education (CAPTE)., • Requires a current New Jersey State license and registration in Physical Therapy or eligibility., • Previous experience preferred but not necessary. New graduates acceptable., • Requires analytic ability, use of independent judgment and sufficient interpersonal and communication skills for interaction with patients, families, students, peers and other health care professionals., • BLS Certification required, as approved by the American Heart Association. We offer competitive base rates that are determined by many factors, including job-related work experience, internal equity, and industry-specific market data. In addition to base salary, some positions may be eligible for clinical certification pay and shift differentials. The salary range listed for exempt positions reflects full-time compensation and will be prorated based on employment status. Saint Peter's offers a robust benefits program to eligible employees that will support you and your family in working toward achieving and maintaining secure, healthy lives now and into the future. Benefits include medical, dental, and vision insurance; savings accounts, voluntary benefits, wellness programs and discounts, paid life insurance, generous 401(k) match, adoption assistance, back-up daycare, free onsite parking, and recognition rewards. You can take your career to the next level by participating in either a fully paid tuition program or our generous tuition assistance program. Learn more about our benefits by visiting our site at Saint Peter's.

Summary: As a Class A truck driver, you will be responsible for delivering our merchandise to various locations. You will be making multiple stops per day, and will be home daily. You will ensure the safe and timely delivery of all products to our customers' locations, while adhering to transportation regulatory compliance. Work Hours: Monday to Friday from 06:00 AM to 05:00 PM, 1 Saturday(s) a month from 06:00 AM to 01:00 PM Seniority Level: Entry Level Employment Type: Full-time Compensation: This hourly, non-exempt position pays from $23.75 to $26.75 per hour, with overtime compensated at 1.5 times the base rate. New hires usually earn between $59,300 and $76,700 annually, or more, depending on experience, overtime hours, and bonuses. Responsibilities: • Deliver countertop and flooring material safely and efficiently., • Assist in the loading, unloading, and proper securing of cargo., • Skillfully position blocks, ties, straps/chains, and binders for cargo securement., • Maintain a constant state of alertness and operate vehicles safely at all times., • Exhibit patience and a polite demeanor towards fellow road users., • Demonstrate strong verbal and written communication skills., • Adapt to changing conditions, prioritize a customer-centric approach, and uphold a commitment to delivering quality service., • Work independently while maintaining focus., • Valid Class A Driver’s License., • Minimum of 1 year of verifiable driving experience with heavy-duty vehicles., • Comfortable with making local deliveries with multiple stops., • Successful completion of driving test and all DOT pre-employment requirements., • Safety-minded with proficiency in maintaining a legal and accurate logbook., • Capable of understanding and interpreting bill of landing/picking sheets., • Previous experience utilizing an iPad or tablet is preferred., • Generate 137lbs of vertical push/pull force., • Able to lift and transfer 65lbs., • Able to carry at least 30lbs the length of the truck bed., • Able to ascend and descend multiple-rung ladder., • Able to frequently bend, stoop, squat, kneel, and/or crouch., • Able to work at elevated height of 72” above the ground while assembling and disassembling strap, ties, ratchets, nuts, bolts, and other securing or fastening equipment., • Able to work at lowered height of 6” above the ground while assembling and disassembling strap, ties, ratchets, nuts, bolts, and other securing or fastening equipment., • This is a safety-sensitive position. Benefits: MSI offers a comprehensive benefits package that includes: • Referral, Holiday, and Annual Bonuses, • Annual pay increases, • Paid Time Off, • Extended Health Care – Includes Virtual Walk-In Clinic and Paramedicine, • Dental Care, • Vision Care, • Company-paid Life Insurance(Life and AD&D), • Tuition Reimbursement, • Charitable donation matching programs, • Free, company-sponsored 1-on-1 tutoring for children/dependents of MSI employees in grades k-12, including free tutoring for SAT and ACT tests. About MSI: Founded in 1975, MSI is a leading supplier of ___, ___, ___ and ___ surfaces products in North America. Headquartered in Orange, California, MSI also maintains over 50 state-of-the-art showroom and distribution centers across the U.S. and Canada. MSI's product line includes an extensive offering of ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ and ___ imported from over 36 countries on six continents. Over the years, MSI has been the recipient of many prestigious awards including: • Top 5 fastest growing companies - OC Business Journal, • Supplier Diversity Award - Home Depot, • #1 Flooring Distributor multiple years in a row - Floor Covering Weekly, • Top Workplaces Award winner multiple times - Top Workplaces

PURPOSE AND SCOPE: The professional registered nurse Inpatient RN CAP 2 may be an entry level designation into the Clinical Advancement Program (CAP) for new employees who meet the RN CAP 2 criteria or attained through advancement from CAP 1. This position is accountable and responsible for the provision and coordination of clinically competent care including assessment, planning, intervention and evaluation for an assigned group of patients. This may include delegation of appropriate tasks to direct patient care staff including but not limited to RNs, LVN/LPNs and Patient Care Technicians. As a member of the kidney disease health care team, this position participates in decision-making, teaching, leadership functions, and quality improvement activities that enhance patient care outcomes and program operations. PRINCIPAL DUTIES AND RESPONSIBILITIES: All duties and responsibilities are expected to be performed in accordance with Fresenius Kidney Care policy, procedures, standards of nursing practice, applicable contractual service agreements, state and federal regulations. • Performs all essential functions under the direction of the Supervisor and with the guidance from the Educator, Preceptor, or in collaboration with another Registered Nurse., • Performs ongoing, systematic collection and analysis of patient data pre – during – post treatment for assigned patients and documents in the patient medical record, makes adjustments or modifications to treatment plan as indicated and notifies Supervisor, Physician, patient’s primary nurse and others as indicated., • Assesses, collaborates and documents patient/family’s basic learning needs to provide initial and ongoing education to patients and family., • Recognizes aspects and implications of patient status that vary from normal and reports to or collaborates with appropriate health team members for input including but not limited to Supervisor, appropriate physician, and the contracted facility/primary Nurse., • Directs and provides safe effective patient care for assigned patients as prescribed for all modality specific treatment procedures., • Assesses daily assigned patient care needs and collaborates with direct and ancillary patient care staff as needed., • Initiates and coordinates communication with FKC and Non-FKC dialysis providers and appropriate contracted facility personnel as needed to provide continuity of patient care., • Performs the implementation, administration, monitoring, and documentation of patient's response to prescribed intradialytic transfusions, including appropriate notification of adverse reactions to physician and appropriate blood supplier., • Administers medications as prescribed and documents medical justification and effectiveness., • Initiates and assists with emergency response measures., • Serves as a resource, leader, coach, mentor and role model for new and incumbent employees by setting examples of appropriate behavior, work habits and attitudes towards patients, co-workers, Supervisors and the company at the facility and area level., • May be asked to provide specialized nursing care instructions to hospital/facility staff as stipulated contractually., • May be assigned to assist in an Outpatient facility on an as needed basis., • May serve as a Preceptor to new employees., • Required to complete CAP requirements to maintain or advance., • Performs all other duties as assigned by Supervisor. PHYSICAL DEMANDS AND WORKING CONDITIONS: The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • The position provides direct patient care that regularly involves heavy lifting, moving of patients and assisting with ambulation. Equipment aids and/or coworkers may provide assistance., • This position requires frequent, prolonged periods of standing and the employee must be able to bend over., • The employee may occasionally be required to move, with assistance, machines and equipment of up to 200 lbs., and may lift chemical and water solutions of up to 30 lbs. as high as 5 feet., • The work environment is characteristic of a health care facility with air temperature control and moderate noise levels., • May be exposed to infectious and contagious diseases/materials., • May be asked to provide essential functions of this position in other locations with the same physical demands and working conditions as described above., • Day to day work includes desk work, computer work, interaction with patients, facility/hospital staff and physicians., • The position requires travel to training/meeting sites and between assigned facilities., • Position requires participation in on-call rotation, night, weekend, holiday or as defined by individual program needs. SUPERVISION: Assigned oversight of Patient Care Technicians/LPNs/LVNs/RNs as a designated Nurse in Charge, after meeting all the following: • Successful completion of all FKC education and modality specific training requirements., • 6 months experience in acute dialysis as a RN. EDUCATION AND LICENSURE: • Current appropriate state licensure., • Current or successful completion of CPR BLS Certification, • Must meet the practice requirements in all states employed. EXPERIENCE AND REQUIRED SKILLS: • Entry level for RNs with minimum 2 years or more of Nephrology Nursing experience in the last 2 years as a RN., • Acute dialysis experience (preferred). "The rate of pay for this position will depend on the successful candidate’s work location and qualifications, including relevant education, work experience, skills, and competencies. Hourly Rate: $41 - $69 Non-Bonus Eligible Positions: include language below. Benefit Overview: This position offers a comprehensive benefits package including medical, dental, and vision insurance, a 401(k) with company match, paid time off, parental leave. EO/AA Employer: Minorities/Females/Veterans/Disability/Sexual Orientation/Gender Identity Fresenius Medical Care North America maintains a drug-free workplace in accordance with applicable federal and state laws. EOE, disability/veterans

Job Description $3,900 Sign-on Bonus* Sales Representative Power is where hustle meets purpose. It’s where leadership opportunities, life-enhancing benefits, and award-winning culture come together. Why? Because our people are our most important asset. And there’s no better investment than their happiness and growth. Our diverse, inclusive, and military-friendly culture has been recognized by Fortune Magazine as the #13 Best Company to Work for and #1 Best Workplace in Construction in the nation, and made the Military Times’ Best for Vets list. 90% of our sales leaders began their careers in entry-level sales positions, proving that Power is a meritocracy - the harder you work, the further you’ll go. The Sales Role Hiring Immediately - As a full-time sales representative, we’re preparing you to succeed in more than just your current position. You will be trained in all of our products and be able to deliver interactive sales presentations that will teach communication skills, negotiation tactics, strategic planning and problem solving. This role will provide you the foundational education and experience needed for all future career growth. The Responsibilities • Delivery of interactive sales presentations on eco-friendly, green products and services to customers, • Participation in ongoing sales training and coaching camps on a weekly basis, • Highly developed communication skills, • Ability to speak publicly with confidence and poise, • Self-motivated, discipline, and career oriented, • Open-minded with a passion for learning a wide-range of skills that will carry through a variety of career paths, • Naturally outgoing individual who thrives in human interaction, • $3,900 Sign-on bonus*, • Hourly Rate plus uncapped commission and bonuses, • Full medical, dental, life, and disability insurance plans that can be tailored to you and your family’s specific needs, • Subsidized child care and fertility benefits, • Paid parental leave, • Free health screenings & rewards for participation in wellness programs, • A comprehensive 401(k) retirement savings program, matched by Power, • Ample paid vacation and holidays, • An employee-relief fund, • Monthly opportunities for performance-based rewards, such as luxury vacations, high-end electronics, gift cards, and tickets to concerts and events, • Year-round events and activities, including an all expenses-paid music festival in Cancun, Mexico for you and a significant other, • Access to the latest technology, such as laptops, and tablets that will help you reach your sales goals faster and more efficiently, • Year-round volunteer opportunities, • Personal development - We provide books, courses and opportunity to attend leadership conferences, • Veterans encouraged to apply, • Edison, NJ, • Princeton, NJ *Power offers a $3,900 sign-on bonus, which will be paid weekly in $325 increments over the course of twelve weeks of initial training. The full sign-on bonus is contingent on successfully completing the twelve weeks of initial training. Power Home Remodeling Group is an equal opportunity employer, and we are committed to hiring a diverse and talented workforce. If you have a disability or special need that requires accommodation, please submit the accommodation request to Company DescriptionWhat makes Power one of Glassdoor’s Best Places to Work and Fortune’s #13 Best Company to Work For? Is it our unlimited earning potential and opportunities? Our commitment to improve the communities we live and work in? Our award-winning events? While these help boost our success, Power’s X-factor is an unwavering commitment to prioritize customer satisfaction and employee happiness above profit. Not what you expected from a home remodeling company? We didn’t think so. After all, exceeding expectations is what we do best. We’re rapidly expanding across the U.S. and hiring for roles in sales, marketing, tech, operations, and customer service. If you’re looking to join a team of caring, hardworking, and passionate individuals doing what they love, learn more about us below and apply today!What makes Power one of Glassdoor’s Best Places to Work and Fortune’s #13 Best Company to Work For? Is it our unlimited earning potential and opportunities? Our commitment to improve the communities we live and work in? Our award-winning events?\r\n\r\nWhile these help boost our success, Power’s X-factor is an unwavering commitment to prioritize customer satisfaction and employee happiness above profit. Not what you expected from a home remodeling company? We didn’t think so. After all, exceeding expectations is what we do best.\r\n\r\nWe’re rapidly expanding across the U.S. and hiring for roles in sales, marketing, tech, operations, and customer service. If you’re looking to join a team of caring, hardworking, and passionate individuals doing what they love, learn more about us below and apply today!

Job Description $3,900 Sign-on Bonus* Entry-Level Sales Representative Power is where hustle meets purpose. It’s where leadership opportunities, life-enhancing benefits, and award-winning culture come together. Why? Because our people are our most important asset. And there’s no better investment than their happiness and growth. Our diverse, inclusive, and military-friendly culture has been recognized by Fortune Magazine as the #13 Best Company to Work for and #1 Best Workplace in Construction in the nation, and made the Military Times’ Best for Vets list. 90% of our sales leaders began their careers in entry-level sales positions, proving that Power is a meritocracy - the harder you work, the further you’ll go. The Sales Role Hiring Immediately - As a full-time sales representative, we’re preparing you to succeed in more than just your current position. You will be trained in all of our products and be able to deliver interactive sales presentations that will teach communication skills, negotiation tactics, strategic planning and problem solving. This role will provide you the foundational education and experience needed for all future career growth. The Responsibilities • Delivery of interactive sales presentations on eco-friendly, green products and services to customers, • Participation in ongoing sales training and coaching camps on a weekly basis, • Highly developed communication skills, • Ability to speak publicly with confidence and poise, • Self-motivated, discipline, and career oriented, • Open-minded with a passion for learning a wide-range of skills that will carry through a variety of career paths, • Naturally outgoing individual who thrives in human interaction, • $3,900 Sign-on bonus*, • Hourly Rate plus uncapped commission and bonuses, • Full medical, dental, life, and disability insurance plans that can be tailored to you and your family’s specific needs, • Subsidized child care and fertility benefits, • Paid parental leave, • Free health screenings & rewards for participation in wellness programs, • A comprehensive 401(k) retirement savings program, matched by Power, • Ample paid vacation and holidays, • An employee-relief fund, • Monthly opportunities for performance-based rewards, such as luxury vacations, high-end electronics, gift cards, and tickets to concerts and events, • Year-round events and activities, including an all expenses-paid music festival in Cancun, Mexico for you and a significant other, • Access to the latest technology, such as laptops, and tablets that will help you reach your sales goals faster and more efficiently, • Year-round volunteer opportunities, • Personal development - We provide books, courses and opportunity to attend leadership conferences, • Veterans encouraged to apply, • Edison, NJ, • Princeton, NJ *Power offers a $3,900 sign-on bonus, which will be paid weekly in $325 increments over the course of twelve weeks of initial training. The full sign-on bonus is contingent on successfully completing the twelve weeks of initial training. Power Home Remodeling Group is an equal opportunity employer, and we are committed to hiring a diverse and talented workforce. If you have a disability or special need that requires accommodation, please submit the accommodation request to Company DescriptionWhat makes Power one of Glassdoor’s Best Places to Work and Fortune’s #13 Best Company to Work For? Is it our unlimited earning potential and opportunities? Our commitment to improve the communities we live and work in? Our award-winning events? While these help boost our success, Power’s X-factor is an unwavering commitment to prioritize customer satisfaction and employee happiness above profit. Not what you expected from a home remodeling company? We didn’t think so. After all, exceeding expectations is what we do best. We’re rapidly expanding across the U.S. and hiring for roles in sales, marketing, tech, operations, and customer service. If you’re looking to join a team of caring, hardworking, and passionate individuals doing what they love, learn more about us below and apply today!What makes Power one of Glassdoor’s Best Places to Work and Fortune’s #13 Best Company to Work For? Is it our unlimited earning potential and opportunities? Our commitment to improve the communities we live and work in? Our award-winning events?\r\n\r\nWhile these help boost our success, Power’s X-factor is an unwavering commitment to prioritize customer satisfaction and employee happiness above profit. Not what you expected from a home remodeling company? We didn’t think so. After all, exceeding expectations is what we do best.\r\n\r\nWe’re rapidly expanding across the U.S. and hiring for roles in sales, marketing, tech, operations, and customer service. If you’re looking to join a team of caring, hardworking, and passionate individuals doing what they love, learn more about us below and apply today!

Diesel Mechanic Full-time New Brunswick, NJ Compensation: Starting $21.86 Based on Experience Join Our Team! Who We Are: Coach USA, a leader in ground transportation is actively seeking a skilled and dedicated Diesel Mechanic to join our dynamic team in New Brunswick, NJ. Positioned in the bustling heart of our operations, our fleet service center is the backbone of our success, ensuring our extensive range of commercial vehicles and equipment are running at peak performance. If you're passionate about keeping buses running smoothly and ensuring passenger safety, we want you on board! The Role: Our Diesel Mechanics play a vital role, where gears meet grit, and power meets precision. Armed with an arsenal of tools and a mind sharp with diagnostic prowess, they are the unsung heroes who keep the wheels of progress spinning. • Diagnose and Repair: Utilize diagnostic tools to identify issues with mechanical, electrical, and other breakdowns and failures, performing necessary repairs., • Diesel Engines: Removal, installation, disassembly, and reconditioning of components of diesel engines., • Preventative Maintenance: Conduct routine and preventative maintenance according to manufacturers' specifications to ensure vehicle reliability and longevity., • Quality Assurance: Uphold our commitment to excellence by ensuring all repairs and maintenance work meets or exceeds industry standards. Complete test drives to make sure all repaired vehicles run correctly and safely., • Detail Oriented: Write detailed inspection reports and repair plans. Maintain electronic maintenance logs., • Safety and Cleanliness: Adhere to all workplace safety policies and procedures, while maintaining a clean and safe work environment. Why join with Us? • Work close to home with no rotating shifts., • Competitive Experience Based Pay, • Rewards & Benefits: Enjoy paid holidays, vacation, PTO, a comprehensive benefits package (including medical, dental, vision, short term disability, life insurance, 401K), plus a tool and boot allowance., • Wear It Proud: Uniforms provided to get you in the professional spirit., • Growth & Development Opportunities: Your career journey is important. We support your growth with training, opportunities to advance and obtaining a CDL. What Sets You Apart: • Experienced Professionals: You have a solid background in diesel mechanics, with specific experience working on Cummins and Detroit engines. ASE Diesel Certification or associate degree in diesel technology is highly regarded but not mandatory., • Problem Solvers: You are adept at troubleshooting and enjoy the challenge of finding and implementing solutions to mechanical issues. Computer diagnostic skills a plus, but training is provided., • Team Players: Ability to work in all weather conditions, including outdoors. Willingness to work weekends and holidays, as needed., • Experience Counts: Have the necessary toolkit to carry out maintenance duties independently. Experience in the Motor Coach Industry preferred., • Safety Champion: Adhere to and champion safety standards to ensure a secure workplace for everyone. Don't miss this opportunity to shift your career into overdrive with a team that values the hard work and dedication of its diesel mechanics. At Coach USA, you're not just repairing buses; you're ensuring that our community stays connected, efficiently and safely. To learn more about your next big career change! APPLY NOW! Coach USA is an Equal Employment Opportunity employer. In compliance with Federal and State equal employment opportunity laws, qualified applicants are considered for all positions without regard to race, color, religion, national origin, sex (including gender identity, sexual orientation, and pregnancy), age, genetic information, disability, veteran status, or other protected class. ©"lube", "mechanically inclined", "mechanic", "Mechanic apprentice", "auto mechanic", technical", "entry level mechanic"©

Summary: The Merchandising Manager (Buyer) is responsible for planning, sourcing, negotiating, and managing the procurement of regionally managed products to support business goals. This role focuses on building and optimizing supplier relationships, ensuring cost-effective purchasing solutions, and maintaining a steady flow of high-quality products. The ideal candidate will excel in analyzing market trends, driving operational efficiency, and delivering results that align with the company’s strategic objectives. Responsibilities: • Select products based on market trends, performance, supplier reliability, and consumer demand., • Manage the product life cycle, understanding consumer preferences and competitive dynamics., • Provide product and pricing recommendations to regional store teams, ensuring an effective balance of volume and margin., • Continuously assess and select vendors based on quality, reliability, cost competitiveness, and market expertise., • Negotiate pricing, order quantities, discounts, and terms with suppliers based on demand, promotions, and market conditions., • Foster strong vendor relationships by addressing issues related to invoicing, product quality, or delivery., • Develop and implement ordering policies, lead-time strategies, and cost-optimization initiatives., • Plan and process daily requisitions and purchase orders to meet store demand, expediting orders as required., • Conduct data analysis to interpret financial performance, track category performance, and identify key business indicators., • Implement category reviews and performance improvement plans to enhance procurement and sales effectiveness., • Collaborate with internal stakeholders to align procurement strategies with business goals., • Monitor market trends and consumer behavior to identify opportunities for product development and competitive advantage., • Participate in trade shows, supplier visits, and market research to maintain a competitive edge., • Merchandising Manager will be responsible for conducting routine visits to all stores in the East Coast region. This includes ensuring proper product placement, managing inventory levels, overseeing promotional displays, and maintaining store standards. Regular store visits will be essential to monitor compliance with merchandising strategies and resolve any operational issues., • Perform other duties as assigned by management. Qualifications: • A Bachelor’s degree in Business, Merchandising, Marketing, or a related field is preferred., • 4 to 7 years of experience in purchasing, supply chain management, or retail merchandising is required; entry-level roles may be available for candidates with relevant education or internships., • Bilingual in English and Mandarin is preferred., • Familiarity with Asian grocery products, cultural preferences, and market trends is a plus., • Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint), • Strong negotiation skills for securing optimal contracts and pricing with suppliers., • Proficient in analyzing sales data and market trends to inform purchasing decisions and optimize inventory., • Experienced in building and maintaining vendor relationships to ensure product quality and timely delivery., • Excellent verbal and written communication skills for effective collaboration with suppliers and internal teams., • Proven ability to manage multiple projects concurrently, ensuring timely execution of purchasing and merchandising strategies., • Authorized to work in the United States without sponsorship. Physical Requirements: • Prolonged periods sitting at a desk and working on a computer, • This job may require standing or walking for extended periods of time, lifting up to 50 pounds, and performing repetitive motions. Position Details: • Employment Type: Full Time, • Location: 561 U.S. Rte 1 , Edison, NJ 088178 Benefits: • Medical, Dental, Vision, and Life Insurance., • 401 (k) Retirement Saving Plan with 4% Company Match., • Long-Term Services Award., • Employee Discount., • Paid Time Off. Compensation: The pay range for this job starts at $65,000 - $75,000 per year. This is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) the responsibilities of the job, your education, skills, qualifications, experience, and location. Beware of Job Scams: We prioritize applicant safety at TAWA Services, Inc. Please exercise caution during your job search. Be wary of unsolicited offers, requests for personal information or upfront payments, poorly written job descriptions, unrealistic promises, and unprofessional communication. Research employers, verify job postings, and trust your instincts. Report any suspicious activity. For helpful guidance on identifying job scams, visit this link provided by the Indeed website: Disclaimer: Our goal is to be a recognized leader in the industry while providing a great workplace for employees. Please note the job descriptions are intended to describe the general nature and level of work being performed by people assigned to the position. They do not cover all the details of skills, duties, or responsibilities required for the positions. Thus, they are not to be construed as an exhaustive list of all skills, duties, and responsibilities required for personnel. All personnel may be required to perform duties outside of their normal responsibilities as instructed by management. Skills, duties and responsibilities may change at any time with or without notice. We are an E.E.O. employer.

Summary: The Category Buyer- Perishable is responsible for planning, sourcing, negotiating, and managing the procurement of regionally managed products to support business goals. This role focuses on building and optimizing supplier relationships, ensuring cost-effective purchasing solutions, and maintaining a steady flow of high-quality products. The ideal candidate will excel in analyzing market trends, driving operational efficiency, and delivering results that align with the company’s strategic objectives. Responsibilities: • Select products based on market trends, performance, supplier reliability, and consumer demand., • Manage the product life cycle, understanding consumer preferences and competitive dynamics., • Provide product and pricing recommendations to regional store teams, ensuring an effective balance of volume and margin., • Continuously assess and select vendors based on quality, reliability, cost competitiveness, and market expertise., • Negotiate pricing, order quantities, discounts, and terms with suppliers based on demand, promotions, and market conditions., • Foster strong vendor relationships by addressing issues related to invoicing, product quality, or delivery., • Develop and implement ordering policies, lead-time strategies, and cost-optimization initiatives., • Plan and process daily requisitions and purchase orders to meet store demand, expediting orders as required., • Conduct data analysis to interpret financial performance, track category performance, and identify key business indicators., • Implement category reviews and performance improvement plans to enhance procurement and sales effectiveness., • Collaborate with internal stakeholders to align procurement strategies with business goals., • Monitor market trends and consumer behavior to identify opportunities for product development and competitive advantage., • Participate in trade shows, supplier visits, and market research to maintain a competitive edge., • Merchandising Manager will be responsible for conducting routine visits to all stores in the East Coast region. This includes ensuring proper product placement, managing inventory levels, overseeing promotional displays, and maintaining store standards. Regular store visits will be essential to monitor compliance with merchandising strategies and resolve any operational issues., • Perform other duties as assigned by management. Qualifications: • A Bachelor’s degree in Business, Merchandising, Marketing, or a related field is preferred., • 4 to 7 years of experience in purchasing, supply chain management, or retail merchandising is required; entry-level roles may be available for candidates with relevant education or internships., • Bilingual in English and Mandarin is preferred., • Familiarity with Asian grocery products, cultural preferences, and market trends is a plus., • Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint), • Strong negotiation skills for securing optimal contracts and pricing with suppliers., • Proficient in analyzing sales data and market trends to inform purchasing decisions and optimize inventory., • Experienced in building and maintaining vendor relationships to ensure product quality and timely delivery., • Excellent verbal and written communication skills for effective collaboration with suppliers and internal teams., • Proven ability to manage multiple projects concurrently, ensuring timely execution of purchasing and merchandising strategies., • Authorized to work in the United States without sponsorship. Physical Requirements: • Prolonged periods sitting at a desk and working on a computer, • This job may require standing or walking for extended periods of time, lifting up to 50 pounds, and performing repetitive motions. Position Details: • Employment Type: Full Time, • Location: 561 U.S. Rte 1 , Edison, NJ 088178 Benefits: • Medical, Dental, Vision, and Life Insurance., • 401 (k) Retirement Saving Plan with 4% Company Match., • Long-Term Services Award., • Employee Discount., • Paid Time Off. Compensation: The pay range for this job starts at $65,000 - $75,000 per year. This is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) the responsibilities of the job, your education, skills, qualifications, experience, and location. Beware of Job Scams: We prioritize applicant safety at TAWA Services, Inc. Please exercise caution during your job search. Be wary of unsolicited offers, requests for personal information or upfront payments, poorly written job descriptions, unrealistic promises, and unprofessional communication. Research employers, verify job postings, and trust your instincts. Report any suspicious activity. For helpful guidance on identifying job scams, visit this link provided by the Indeed website: Disclaimer: Our goal is to be a recognized leader in the industry while providing a great workplace for employees. Please note the job descriptions are intended to describe the general nature and level of work being performed by people assigned to the position. They do not cover all the details of skills, duties, or responsibilities required for the positions. Thus, they are not to be construed as an exhaustive list of all skills, duties, and responsibilities required for personnel. All personnel may be required to perform duties outside of their normal responsibilities as instructed by management. Skills, duties and responsibilities may change at any time with or without notice. We are an E.E.O. employer.

Job DescriptionCompany Description Global supply chain management is what we do, and at the heart of Expeditors you will find professionalism, leadership, and a friendly environment, all of which foster an innovative, customer service-based approach to logistics. Expeditors is a global logistics company headquartered in Seattle, Washington. As a Fortune 500 company, we employ over 19,000 trained professionals in a worldwide network of over 350+ locations across six continents. Expeditors satisfies the increasingly sophisticated needs of international trade through customized solutions and seamless, integrated information systems. Our Mission is to recruit, train, and retain the very best logistics and technical experts the world over. We love to promote from within - more than 50 percent of our employees have been at Expeditors for five years or more. Our high retention rate is influenced by a unique compensation program for positions that are more than just jobs - they're chances to grow, do what you love and build a career with us! Job Description Duties and Responsibilities • Ensure smooth and timely customs process flow, • Ensure accurate and timely data entry into our operational system, • Track and Trace Custom files and reporting, • Ensure accurate and timely client billing, • Understand all the elements of the import and export customs Desk Level Operating Procedure and correctly interpret this information to fulfill our customer´s instructions and expectations., • Transfer customs declaration information from documents, or other sources into the customs entry system to allow for the build of a valid customs declaration, • Assist with verification of customs declaration information and the submission of such to the customs authority • Daily execution of workflow and department metrics., • Build and maintain strong relationships with customers and governmental Customs organizations., • Timely completion of items on learning plan(s) and Personal development plan. Systems: • Embrace and utilize productivity tools, • Be open to implementing new system changes and enhancements., • Be involved and suggest system/process improvements. Culture: • Bachelor's degree, • Professional oral and written communication skills in English, • Demonstrate exceptional customer service skills, • Organizational skills, • Needs analysis skills, • Problem solving skills, • Strong Microsoft Office skills (Word, Excel etc.) Additional Information Expeditors offers excellent benefits: • Paid Vacation, Holiday, Sick Time, • Health Plan: Medical, • Life Insurance, • Employee Stock Purchase Plan, • Training and Personnel Development Program, • Growth opportunities within the company, • Employee Referral Program Bonus, • Salary range: $48,000 - $51,000

Job Description Hiring Company Overview Tri-State Light & Energy (TSLE) is an energy efficiency consulting and implementation contracting firm with a 40-year history in customer service and energy cost saving delivery. TSLE is a Minority Based Enterprise (MBE) for multiple states and has a major focus on providing support for DEI and Diversity initiatives. Regionally, TSLE delivers Direct Install Programs, Engineered Solutions Programs, Energy Savings Improvement Programs, and Engineering Services for Municipal, Commercial and Industrial Clients. TSLE is consistently recognized and awarded for being a small business champion that marries innovative technology with small company personalization and service. We are growing and looking to hire dedicated, industry-qualified candidates at all experience levels to grow with our company. Section Title: Job Description Job Description We are seeking a dedicated and detail-oriented Energy Engineer to join our team in New Brunswick, New Jersey. The ideal candidate will be responsible for conducting energy audits, data collection and entry, feasibility studies, engineering assessments, and providing program-related support activities. This crucial role also involves conducting on-site inspections, design support, reviewing technical documents, and participating in construction management. The Energy Engineer will play a vital role in ensuring our projects realize their energy savings and meet all regulatory standards. Section Title: Job Responsibilities Job Responsibilities • Perform onsite inspections, including detailed data collection and performance testing., • Prepare site investigation, preliminary design, and due diligence reports, including review of ordinances, utility service research, outside agency regulations, and onsite visits to establish comprehensive development guidelines., • Provide thorough education to end users regarding energy efficiency; field and answer related questions., • As a subject matter expert, be responsible for project coordination with the client, other consultants, contractors, and the project team to prepare a comprehensive site plan application., • Ensure technical aspects of work are performed following applicable regulations or project plans., • Investigate problems in construction or renovation projects., • Provide technical assistance to customers, contractors, and other stakeholders, including support with energy savings calculations and meeting program requirements., • Support and promote relationships with industry and solution partners to maximize project implementation, promote efficiency, and educate customers while sustaining a robust program pipeline., • Prepare written correspondence to outside agencies, clients, contractors, etc., • Perform site visits to verify the appropriate installation of recommended measures., • Monitor new products and technologies related to this industry for ongoing and future projects., • Stay informed about energy issues and industry trends through regular technical reading and participation in local and national professional organizations., • Provide thorough education to end users regarding energy efficiency, field and answer related questions., • Perform other duties as assigned. Section Title: Qualifications Qualifications Bachelor’s or master’s in engineering (Mechanical, Electrical, Energy). Other engineering disciplines will be considered. • Demonstrated interest in energy efficiency is must., • A minimum of 1 year of relevant engineering or fieldwork experience required; 2 to 5 years are preferred., • Must reside in New Jersey., • Demonstrated knowledge of Lighting and Lighting Controls, HVAC Equipment, Building Management System (BMS) and Building Envelope Components., • Demonstrated experience with energy codes and standards (IECC, ASHRAE, etc.) and Energy Star components., • Knowledge of ASHRAE level energy auditing, • Must be able to lead and perform on-site and virtual audits and customer site visits in various environments, including commercial, industrial, school, and government facilities., • Strong project management skills with the ability to set priorities, collect and document project requirements, successfully handle multiple projects simultaneously, and meet deadlines in a fast-paced environment., • Ability to maintain and operate personal and/or company vehicles with a valid driver’s license., • Must be willing and able to travel within the tri-state area; some overnight travel may be required., • Strong customer service capability focusing on proactively identifying customer needs and managing customer expectations., • Excellent written and verbal communication skills., • Self-starter who can work independently or within a team environment., • Exceptional organizational, time-management, and planning skills. Section Title: Professional Skills Professional Skills • Familiar with the use of AutoCAD to assist in the production of site plan drawings., • Knowledge of eQuest, EnergyPlus or Open Studio software is a plus., • Proficient in using Microsoft Software including Word, Excel, Outlook, and Project and other management software. Section Title: Physical Abilities Physical Abilities The physical demands described here represent those that an employee must meet to perform the essential functions of this job successfully. • While performing the duties of this job, the employee is occasionally required to stand; sit, walk, climb, balance, stoop, kneel, crouch or crawl; use hands to finger, grasp, or feel objects; reach with hands and arms; push or pull; talk and hear; use repetitive motions., • The employee is frequently required to lift and/or move up to 20 pounds and occasionally lift and/or move up to 25 pounds., • The employee must have visual acuity to perform activities such as preparing and analyzing data and figures, transcribing, viewing a computer terminal, and extensive reading and visual inspections of site plans. Section Title: Work Environment Work Environment While performing the duties of this job, the employee is subject to the following work environment: • The employee is subject to both inside and outside environmental conditions., • The employee is subject to hazards such as proximity to moving mechanical parts, moving vehicles, and electrical current. Section Title: Equal Employment Opportunity (EEO) Equal Employment Opportunity (EEO) TSLE is an equal-opportunity employer committed to diversity and inclusion in the workplace. TSLE prohibits discrimination and harassment of any kind based on age, race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, age, marital status, gender, gender identity or expression, veteran status, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. TSLE makes hiring decisions based solely on qualifications, merit, and business needs at the time. Please read through our EEO Policy for more information. TSLE is committed to working with and providing reasonable accommodation to applicants with physical and mental disabilities. TSLE is a drug-free workplace. Section Title: Screening Screening TSLE makes offers of employment contingent upon (1) successful completion of a routine background investigation and reference check, (2) drug testing, and (3) Act 34 Child Abuse clearance. Section Title: Benefits Benefits • Medical, vision, and dental insurance., • 401(k) and company match after 1st year anniversary., • Company-provided life insurance., • Health Savings Account (HSA)., • Education reimbursement program with management approval., • Annual paid time off., • Observance of 8 Federal Holidays. Section Title: Work Schedule Work Schedule • Monday through Friday, 8:00 a.m. to 5:00 p.m., • 40-hour work week., • Occasional weekends., • On-call requirement. Section Title: Compensation Compensation • Salary Range: Minimum $85K + commensurate with experience.

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Company parties, • Competitive salary, • Free food & snacks, • Health insurance Ideal candidate should possess the following: • Relevant experience in the industry (preferred at least a couple of years of work experience)., • Interest in concrete, steel, and foundation design, as well as Mechanical means and Methods for construction., • Experience with working with a team in a fast-paced environment and handle multiple projects and deadlines at once., • Working independently with little to no supervision while also providing communication internally with peers as well as external communication with clients. Additionally, Interested candidates should have experience with drafting software (AUTOCAD 2d/3d), Structural analysis software, (RISA preferred) , Solid Modeling software (Inventor), math programs, etc. Familiarity with structural steel design codes (LRFD / ASD), Wind / Seismic Codes, and or NYC Building Codes would be a bonus. Company Overview Patuxent Engineering, LLC provides construction engineering and support services in the high-rise building industries and heavy construction industry. Our services include temporary structures, shores, SOE, Existing Structure Stability evaluations, as well as material and personnel vertical transportation solutions, worker access solutions, heavy equipment applications as well as means and methods. Please attach a cover letter, resume, and list your salary requirements when responding with contact information.

Job DescriptionSalary: $25-27/hour Woods Machinery is seeking an Entry Level Heavy Equipment Mechanic to join our dynamic team. In this role, within our rental department, you will help ensure the optimal performance and reliability of the machinery we rent to customers. The ideal candidate will bring a strong mechanical aptitude, eagerness to learn, and a commitment to safety and quality workmanship. Key Responsibilities: • Perform routine preventive maintenance on rental fleet equipment, including oil changes, filter replacements, fluid checks, and inspections., • Complete pre-delivery and post-delivery inspections to ensure equipment is safe, clean, and ready to rent., • Accurately document all maintenance and repair activities and maintain detailed service records., • Support dealer operations by moving, staging, loading, and unloading equipment as needed., • Assist customers with equipment operation and maintenance basics, including proper tie-down points and safety guidelines., • Provide occasional customer support by explaining equipment functions or offering maintenance recommendations., • Promptly report potential equipment issues or safety concerns to management., • Consistently complete tasks within estimated hours., • Maintain a clean, organized, and safe work environment in both the shop and yard., • Perform other duties and special projects as assigned. Benefits: • Hourly pay + overtime opportunities, • Career growth and advancement opportunities within Woods Machinery, • Health, vision & dental insurance, • Tool reimbursement program, • Paid time-off (vacation and personal days), • 401K Retirement Plan with company matching, • Company supplied uniforms, • Company monthly lunch, • Discounts offered on products sold by the company, • Referral bonus Requirements: • 1+ years of mechanical experience (automotive, diesel, agricultural, or construction equipment preferred); willing to train candidates with strong mechanical aptitude, • Basic knowledge of diesel engines, hydraulics, and electrical systems (technical training certificates preferred), • Ability to perform routine maintenance tasks such as oil changes, filter replacements, fluid checks, and inspections, • Strong problem-solving skills, attention to detail, and organizational proficiency, • Ability to work both independently and as part of a team in a dynamic, fast-paced environment, • Strong commitment to safety and adherence to industry regulations, • Excellent communication skills for interacting with coworkers and customers, • Must possess standard tools required for equipment repairs, • Physically able to lift 50+ pounds and work in indoor/outdoor settings, exposed to varying weather conditions (heat, cold, rain, dust, dirt, noise), • Willingness to work overtime as business needs arise About Us: Woods Machinery is a second-generation family owned business providing equipment sales, rentals, and product support since 1984. We are an industry leading company dedicated to providing exceptional products and support to our customers. We take pride in our commitment to quality, customer satisfaction, and collaborative team environment. Please visit to learn more about us, our products, and services.

Job DescriptionSummary: As an integral part of our project delivery team, the Junior Project Manager supports the Senior Project Manager and cross-functional teams to ensure smooth execution of construction, automation, and service projects. This entry-level role is perfect for someone beginning their project management journey—organized, curious, and ready to grow. Through hands-on experience and mentorship, the Junior PM will gain practical skills across all phases of a project, from launch to completion. Qualifications • 2+ year of experience in construction, HVAC, estimating, or project coordination preferred, • Desire to learn project management methodologies in a fast-paced, collaborative setting, • Strong communication, organizational, and people skills, • Keen attention to detail paired with effective time management, • Proficiency in Microsoft Office Suite (Outlook, Word, Excel, Teams), • Experience with project tracking tools (e.g., Smartsheet, Microsoft Project) is beneficial, • Familiarity with Timberline Sage 300 CRE a bonus, not required, • High school diploma/GED required; degree in a related field is a plus, • Dependable and self-motivated with a growth mindset, • Open to feedback and willing to evolve with team and company processes, • Collaborate with the Senior Project Manager to plan, coordinate, and oversee project progress, • Participate in kickoff meetings and assist in documenting scopes, milestones, and requirements, • Support interdepartmental communication to keep construction, automation, and service activities aligned, • Coordinate with vendors for material procurement and ensure timely deliveries, • Assist in managing and organizing essential project documentation, including:, • RFIs, submittals, change orders, and O&M manuals, • Track and update project metrics such as:, • Design revisions, • Permit status, • Equipment orders, • Labor and installation schedules, • Budget forecasts, • Contribute to bi-weekly WIP (Work in Progress) meetings with status updates, • Join site visits with the Senior PM to observe work and learn best practices for quality assurance, • Maintain clear, structured digital and paper files for each project, • Foster strong relationships with clients, subcontractors, and internal teams through consistent communication, • Follow company safety protocols and OSHA guidelines Employee Benefits Package We’re committed to supporting our team members with a well-rounded, competitive benefits package that promotes health, financial wellness, and work-life balance: • Industry-Leading Compensation — Salary commensurate with experience and market standards, • Generous Time Off — Paid vacation, sick leave, and holidays to recharge and rest, • Health Coverage — Contributory healthcare plans tailored for your needs, • Dental Insurance — 100% employer-paid for a healthier smile, • Vision Plan — Coverage to help you see clearly and comfortably, • 401(k) Retirement Program — With company matching to boost your future savings, • Flexible Spending Account (FSA) — Pre-tax options for eligible healthcare expenses

Job DescriptionCompany Description AbbVie's mission is to discover and deliver innovative medicines and solutions that solve serious health issues today and address the medical challenges of tomorrow. We strive to have a remarkable impact on people's lives across several key therapeutic areas – immunology, oncology, neuroscience, and eye care – and products and services in our Allergan Aesthetics portfolio. For more information about AbbVie, please visit us at . Follow @abbvie on X, Facebook, Instagram, YouTube, LinkedIn and Tik Tok. Job Description This role is field-based and candidates should live within a reasonable distance from the primary city. Talent will be hired at a level commensurate with experience. This geography covers Edison, East Linden, East Brunswick, Bridgewater, Somerset and surrounding areas. Execute brand strategy and tactics in field, sales performance, effectively manage assigned territory and targeted accounts, build strong customer relationships and customer needs solving capability to maximize short and long term sales performance placing the patient into the center of any efforts and operating within AbbVie’s business code of conduct, policies and all applicable laws and regulations. Responsibilities • Deliver sales performance, brand KPIs, financial targets, marketing objectives, etc. in order to meet or exceed on those objectives., • Create pre-call plan using SMART objectives and execute post-call evaluation in order to continuously improve sales performance. Effectively handle objections, misunderstandings, concerns and consistently gain logical and reasonable calls to action in order to close on every sales call., • Proactively and continuously aspire to serve customer needs, customer expectations and challenges in order to build trusted customer relationships and to achieve win-win agreements between AbbVie and customers., • Develop and execute a call plan that achieves set call metrics and optimizes coverage and frequency to key customers in order to maximize access and sales opportunities, • Continuously build understanding on customer needs and expectations, territory market landscape, competitors, market segments/dynamics, accounts, disease, product, clinical and sales expertise and share this market intelligence information with in-field team, brand team and sales manager to achieve alignment, to anticipate environmental changes and challenges and to optimize brand strategy and its execution., • Differentiate AbbVie’s value proposition with health providers assigned and identify, develop and maintain disease state experts and speakers/advocates in order to maximize brand performance.Qualifications, • Bachelor’s degree in health, sciences, pharmacy or business-related field preferred or relevant and equivalent industry experience required, • Relevant and equivalent industry experience required in lieu of a bachelor’s degree is at least five (5) years of experience with three (3) or more years of experience within the pharmaceutical/health/science industry preferred and a high school diploma/GED required, • Proven track record of success in selling and solid presentation skills. Proactively identifies customer style / behavior and adapts quickly all aspects of selling approach. Provides impact with ideas for the larger organization and anticipates and responds to changes., • Influences others & is viewed as a credible and respected role model and resource among peers. Builds collaborative partnership with district colleagues and matrix team, etc. Leads by example; consistently displays positive behaviors and peer coaching through changing and challenging environments., • Documented success in leadership and support role of increased responsibility at the district, region and/or organizational levels. Understands and leverages findings to develop sales strategies., • Preferred: Proven track record of success in sales performance within respective therapeutic areas. Commercial pharmaceutical industry experiences such as physician/account based selling, training, managed health care or marketing preferred. English language proficiency verbally and in writing (for all non-English speaking countries)., • An essential requirement of your position is to satisfy all applicable health care industry representative (HCIR) credentialing requirements to gain and maintain entry into facilities and organizations that are in your assigned territory. You must also be in good standing and/or eligible to obtain these credentials. External: Specialty Physicians in Therapeutic brand area, pharmacists, nurses, others depending on brand plan. Internal: In-field team members, Sales Management (i.e. DSM), Marketing Management, Training, Customer Excellence, & Brand Plan stakeholders. Additional Information Applicable only to applicants applying to a position in any location with pay disclosure requirements under state or local law: * The compensation range described below is the range of possible base pay compensation that the Company believes in good faith it will pay for this role at the time ofthis posting based on the job grade for this position. Individual compensation paid within this range will depend on many factors including geographic location,and we may ultimately pay more or less than the posted range. This range may be modified in the future. * We offer a comprehensive package of benefits including paid time off (vacation, holidays, sick), medical/dental/vision insurance and 401(k) to eligible employees. * This job is eligible to participate in our short-term incentive programs. * This job is eligible to participate in our long-term incentive programs Note: No amount of pay is considered to be wages or compensation until such amount is earned, vested, and determinable. The amount and availability of anybonus, commission, incentive, benefits, or any other form of compensation and benefits that are allocable to a particular employee remains in the Company's soleand absolute discretion unless and until paid and may be modified at the Company’s sole and absolute discretion, consistent with applicable law. AbbVie is an equal opportunity employer and is committed to operating with integrity, driving innovation, transforming lives and serving our community. Equal Opportunity Employer/Veterans/Disabled. US & Puerto Rico only - to learn more, visit US & Puerto Rico applicants seeking a reasonable accommodation, click here to learn more:

Job Description Job Description Date 7/2025 Location 1300 Airport Road, North Brunswick NJ Title Associate, QA Operation Support Department Quality Assurance Reports to Manager, QA Operations FLSA (Exempt or Non-Exempt Exempt Role Overview This position is one of high regulatory responsibility that provides direct quality oversight for the cGMP production of Dietary Supplements and nutraceuticals. This position will help ensure compliance to SOPs, batch records, master manufacturing records, and to 21 CFR Part 111 and 117. Areas of Responsibility Level 1 - Associate, QA Operations Support Summary of the Role: Entry-level position in the QA department focused on supporting sampling and/or dispensing activities under supervision. Intended for fresh graduates or new entrants to the pharmaceutical QA function. ???? Key Responsibilities: • Assist with material sampling and dispensing under guidance., • Support line clearance and hygiene compliance checks., • Label and transport sampled materials as per SOPs., • Maintain basic records and area cleanliness., • Learn cGMP and SOP requirements. Level 2 – Associate, QA Operations Support ???? Summary of the Role: Responsible for performing QA-related sampling and/or releasing , dispensing activities in compliance with SOPs and regulatory requirements. Ensures proper documentation and real-time quality assurance during material handling. ???? Key Responsibilities: • Execute material sampling , releasing , dispensing as per approved procedures as needed., • Perform line clearance and ensure area readiness., • Label materials correctly and ensure segregation of sampled vs. un-sampled., • Maintain logbooks, records, and data entries accurately., • Report deviations or incidents to the coordinator promptly. Level 3 – Associate, QA Operations Support ???? Summary of the Role: Mid-level QA role with responsibility for overseeing sampling and dispensing operations. Ensures compliance, accuracy, and efficiency of all QA activities in the function. ???? Key Responsibilities: • Supervise and coordinate QA sampling releasing , dispensing as per approved procedures as needed., • Review documentation completed by associates., • Ensure timely and compliant execution of sampling plans., • Conduct training and mentoring for junior staff., • Support audits, investigations, and CAPA implementation., • Performs issuance of batch cards of Manufacturing, Coating and Packaging., • Collects samples from on floor production for further testing and retention., • Distributes testing samples to In-house Analytical , Elemental and Microbiology Labs, • Prepares In process Labels for production ,and QA samples to be provided along with the Batch Records Other Responsibilities Including Safety: • Works in a safe and responsible manner in order to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements. Education & Qualification: Level 1 – Associate, QA Operations Support • B.Sc. / B.Pharm. or equivalent in a science-related field., • Relevant QA experience working within a GMP and/or with GCP regulations. Level 2 – Associate, QA Operations Support • B.Sc. / B.Pharm. (required), • 1–3 years of experience in QA or related area preferred working within a GMP and/or with GCP regulations. Level 3 – Associate, QA Operations Support • B.Sc. / B.Pharm. (minimum); M.Sc. / M.Pharm. preferred, • 3–6 years of relevant QA experience working within a GMP and/or with GCP regulations. Certifications, Licenses, Credentials: • N/A Skills & Ability Level 1 – Associate, QA Operations Support • Willingness to learn and follow instructions., • Basic understanding of GMP (preferred)., • Good observational and documentation skills., • Teamwork and adaptability. Level 2 – Associate, QA Operations Support • Working knowledge of cGMP and SOPs., • Attention to detail and strong documentation habits., • Familiarity with quality systems (e.g., logbooks, traceability)., • Communication and coordination abilities Level 3 – Associate, QA Operations Support • Strong knowledge of cGMP and quality systems., • Leadership and team management skills., • Effective communication and problem-solving., • Ability to handle audits, deviations, and cross-functional coordination., • Good documentation and review capabilities. Physical Requirements (lifting, etc.): • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool., • Must be able wear all PPE including lab coat, face mask, booties, gloves, safety glasses. Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employee can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. shift schedule 1st shift: 7:00 AM - 3:30 PM, 2nd shift: 3:00 PM - 11:30 PM and 3rd shift: 11:00 PM - 7:30 AM

Job DescriptionSalary: $35-$45 p/h - Based on experience Come join a team that has been in business for over 39 years! We take great pride in our exceptional reputation in the commercial HVAC industry built on the quality of our work and the dedication of our loyal employees. We offer a comprehensive benefits package, competitive salaries, and company-sponsored events throughout the year. Our leadership team is transparent about the direction of the company and our goals, so every team member understands where were headed. We invest in our people and training, and were looking for individuals who think outside the box and want to grow with us. If this sounds like you, keep reading! POSITION SUMMARY: Critical thinker and self-starter, willing to go the extra mile and stay committed to educating themselves in our constantly changing field. Candidates should have extensive experience with pipefitting techniques for grooved, copper, PVC, threaded and black piping. Candidates should also be comfortable working with little supervision and possess a strong work ethic and team mindset Requirements and Qualifications: • Minimum 5 years of Commercial Pipefitter field experience(We are not seeking entry-level applications with only schooling experience or those with residential experience only), • Grooved Piping, • Threaded Piping, • Copper Piping (Sweat, Pro-Press, Brazed), • PVC Piping, • Black Pipe Piping, • Welded Pipe -experience is a plus, • Refrigerant piping (brazing) - experience is a plus, • Certification through the Environmental Protection Agency to handle refrigerants is a plus (Universal or Type I & Type II, 410A), • High School diploma or GED equivalent, • Knowledge of hand cutting tools, electric saws, and electrical and gas equipment., • Safety-minded and knowledge of OSHA & NFPA safety regulations., • Current valid drivers license for operating motor vehicles in the state of New Jersey, • Must be punctual, dependable and adhere to a daily schedule with multiple appointments in different locations, • Must be available for seasonal overtime during the summer and winter months, • Must have professional appearance, basic writing and computer skills, customer service skills, • Must have strong installation skills with ability to think outside of the box, • Experience with commercial HVAC/R is a plus:, • Split Systems, Package Units, Ductless Systems, Heat Pumps, Cooling Towers, Boilers, PTAC units, VAVs, Chillers, etc., • Candidate should reside in the NJ area to be considered Duties and Responsibilities: • Travel to project locations, often multiple daily, as required, • Install HVAC/R equipment to ensure proper operation in accordance with established procedures and according to code., • Perform other duties as required to maintain equipment and follow all company and customer safety policies and procedures., • Maintain all site locations for safety and cleanliness before, during and after services are provided. Working Conditions: Pushing, pulling, and lifting various types of equipment. Walking, standing, and stooping for extended periods of time. Climbing and working from ladders and staging while carrying equipment that may weigh up to 75 lbs. Working at difficult angles to perform repairs. Working in all types of weather conditions. May be exposed to dust, noise, heat, cold, lubricants, and chemicals during the course of work. The above statements are intended to describe the general nature and level of the work being performed by people assigned this job. They are not an exhaustive list of all duties, responsibilities, knowledge, skills and abilities associated with the job. Job Type: Full-time and project location based, 7AM - 3:30PM Daily We are a drug free company and require all employees to pass a drug test prior to beginning employment Company Benefits: • Competitive Industry Salary based on experience and training, • Paid Vacation Days, • Paid Sick Days, • Paid Holidays, • Health Care (contributory), • Dental Plan (employer paid), • Vision Insurance, • 401K Matching, • Pretax Flexible spending account (FSA), • Cell Phone, • Company Issued Uniforms, • Company Issued EZ-pass, • Technician Training (In-House & School Based), • Company Vehicle if eligible, • Employee Referral Program, • Overtime available, • Company Events

Job DescriptionSalary: $27.00/hr Are you looking for an exciting new career or a fresh start? Tired of working the same boring job? Weve got just the change you're looking for, something new, a career path with stability! Gerhart is seeking an Billing Coordinator to execute company invoicing, by increasing the flow of processing, and efficiency. This role will have a focus on reviewing completed Work Orders, resolve and address invoice related issues and questions, assist with generating company invoicing when needed, and providing administrative support at a high level. The successful candidate demonstrates a high level of initiative and self-motivation, takes ownership of tasks and drives them to completion, and is a self-starter with a strong sense of responsibility and follow-through. Key Responsibilities, include but are not limited to: • Review completed Work Orders obtaining necessary information to ensure accuracy and prompt billing., • Maintain required company software systems with invoice status information, new customer data based on information provided., • Provide miscellaneous administrative support to Business Unit Manager., • Support administrative functions during team members absences., • Execute additional duties and responsibilities as assigned. Qualifications: • Good communications skills both written and verbal., • Background in Accounting is preferred., • Minimum of 5 years experience in similar position or A.S. degree in related fields., • Apply effective time management skills to meet deadlines, optimize productivity, and ensure efficiencies of all daily tasks., • Ability to handle multiple tasks simultaneously while maintaining attention to detail, accuracy, and minimal errors., • Maintain a well-organized workflow and filing system., • Self-starter and motivated to work independently., • Computer proficiency skills including Excel, Word, and order entry systems., • Problem-solving mindset with a focus on creating positive customer outcomes. Want to hear more about what we have to offer at Gerhart? We are a diverse company providing systems integrations, field service and turn-key installations of Process Automation Systems, Industrial Weighing Equipment, and Process Instrumentation. We are seeking highly motivated candidates to join our team of talented employees and contribute to our continued success and growth. Gerhart is a well-established company with over 90 years experience in the industry! Join our company where our people and excellence are essential to our culture. Gerhart Benefits package includes: • Benefits package: various medical options including 100% employer covered benefits, dental, and vision plans, • Paid Time off, • Life Insurance, • Matching 401k

Job Description Our mission is to provide financial security and peace of mind through our insurance, annuity, and investment solutions. We act with integrity and humanity in all our interactions with our policy owners, business partners, and one another. Grounded in both confidence and humility, we serve as stewards for the long term. We are here for good, reflecting both the permanence of New York Life and our commitment to do the right thing in business and society. Everything we do has one overriding purpose: to be there when our policy owners need us. Are you a driven self-starter with strong principles who is interested in making a positive difference in the lives of others? We are looking for you! New York Life is growing its team by hiring a financial service professional who can offer our wealth of financial products and services to clients who are striving to establish strong financial foundations and achieve their monetary goals for a bright future. Training, Support, and Professional Development: New York Life offers a comprehensive three-year training program, marketing support, as well as prospecting and technical assistance. Our programs give you the ability to work with highly successful, established agents and managers who assist you in developing a clientele. New York Life provides the resources and ongoing support you would expect from a Fortune 100 company. About New York Life: New York Life is among the strongest and most respected financial companies in the world. New York Life has received the highest financial strength ratings currently awarded to any U.S. life insurer by each of the four major rating companies: A.M. Best (A++), Standard & Poor’s (AA+), Moody’s Investors Service (Aaa), and Fitch (AAA)¹. For 65 consecutive years, we have led the Million Dollar Round Table with more members than any other insurance or financial institution in the world². New York Life has been recognized as one of the “World’s Most Admired Companies” by Fortune Magazine for 2019. Financial Service Professionals offer investment advisory services through Eagle Strategies LLC, a Registered Investment Adviser. Registered Representatives offer securities through NYLIFE Securities LLC (member FINRA/SIPC), A Licensed Insurance Agency - Equal Opportunity Employer M/F/D/V 1-Full-time agents and their dependents are immediately eligible for medical, dental, vision, long-term disability, and group term life insurance. New York Life reserves the right to amend or terminate any benefit plans, in whole or in part, at any time. 2- Source: Individual Third Party Ratings Reports as of 7/30/18. 3- MDRT (Million Dollar Round Table) is recognized throughout the industry as the standard of excellence in life insurance sales performance. SOURCE: MDRT as of 7/1/2019 4- Based on revenue as reported by “Fortune 500 ranked within Industries, Insurance: Life, Health (Mutual),” Fortune magazine, 6/1/19. For methodology, please see Compensation: $65,000 - $125,000 yearly Responsibilities: • Collect and organize each client’s financial information using a CRM to determine financial status, financial goals, cash flow, and financial expectations, • Employ a research-based approach to providing financial advice and strategies based on educational meetings and/or seminars centered on client risk tolerance and financial goals, • Create customized financial plans using the products and services we offer based on each client’s potential life and financial needs, • Assist clients with decisions related to life insurance, mutual funds, savings plans, and other financial products and services, • Identify, seek out, and generate prospects continuously using social media or other marketing tools and create strong relationships with new clients as their trusted advisorQualifications:, • Must have effective relationship management skills, • Ability to successfully network to prospect new potential clients is a must, • Uncompromising integrity and the ability to effectively communicate complex programs and ideas is requiredAbout Company New York Life is among the strongest and most respected financial companies in the world. New York Life has received the highest financial strength ratings currently awarded to any U.S. life insurer by each of the four major rating companies: A.M. Best (A++), Standard & Poor’s (AA+), Moody’s Investors Service (Aaa), and Fitch (AAA)¹. For 65 consecutive years, we have led the Million Dollar Round Table with more members than any other insurance or financial institution in the world². New York Life has been recognized as one of the “World’s Most Admired Companies” by Fortune Magazine for 2019.

Job DescriptionJob Description We are seeking a motivated and driven Life Insurance Agent to join our team in the Financial Services industry. As a Life Insurance Agent, you will be responsible for selling life insurance policies, providing excellent customer service, and maintaining client relationships. The ideal candidate should be a licensed life insurance agent with strong sales skills and a self-starter attitude. Responsibilities: • Sell life insurance policies to potential clients, • Provide accurate and up-to-date information on various insurance products, • Develop and maintain client relationships, • Utilize CRM system to manage client information and sales process, • Meet sales targets and goals RequirementsRequirements: • 0-1 years of experience in the insurance industry, • Licensed life insurance agent, • Strong sales and customer service skills, • Computer knowledge, • Self-driven and motivated individual, • Excellent communication and interpersonal skills Pay Range: $68,000-$112,000 If you meet the above requirements and are looking to kick-start your career in the insurance industry, we encourage you to apply for this exciting opportunity. Benefits • Benefits as UNCAPPED potential and flexibility., • 100% Remote/100% Commission/1099, • Qualifying candidates will receive rewards such as all inclusive vacation trips. Provided Insurance Options for Qualifying Candidates are: • Dental, • Vision, • Health, • Life

Job Description • We are hiring immediately for full time MICROMARKET ROUTE DRIVER positions., • Location: Canteen - 425 Raritan Center Parkway, Edison, NJ 08837. Note: online applications accepted only., • Schedule: Full time; Monday through Friday, hours may vary. Some weekends required. More details upon interview., • Requirement: No prior experience is required., • Fixed Pay Rate: $23.00 per hour. *Internal Employee Referral Bonus Available The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: About Canteen: Canteen brings break time to everyone. We combine food, service, and experience backed by industry-leading technology to help companies create a better workplace and connect their employees. Canteen’s solutions include markets, office coffee and snacks, unattended retail, and culinary. Our people are at the heart of everything we do. Their dedication, collaboration, and passion fuel our growth. Interested in joining our team? You bring the enthusiasm, customer service, and commitment; we’ll supply the opportunity and innovation. Together, we’ll continue to transform our industry. Come for the job, stay for the career. We are Canteen. Job Summary Summary: The Route Driver drives a company vehicle over an established route to deliver products or render services and fills and maintains micro market and related equipment. The Route Driver is the face of the company and must project a professional and positive image of Canteen at all times while maintaining and building excellent client and customer relationships. This position has excellent advancement opportunities, providing employees with the foundation needed for entry level management opportunities. Essential Duties and Responsibilities: • Maintain proper inventory levels and product distribution for micro market., • Provide client and customer satisfaction in every aspect of job performance., • Display a clear understanding of company policies and ability to administer as needed., • Performs routine cleaning and sanitation of micro market and other related equipment., • Conducts minor service and adjustments on markets. When necessary reports defective equipment to designated maintenance repair service operators or technician dispatcher., • Prior to beginning each day’s route, ensure that truck is properly loaded with all product required to properly service all scheduled markets following outlined operational procedures., • Informs regular clients and customers of new products or services, listens to and resolves service complaints., • Sets up merchandise and sales promotion displays or issues sales promotion materials to customers., • Accountable for all receipt of goods, invoices, delivery tickets, cash received or collected and product., • Conducts inventory reconciliation in accordance with District procedures., • Keep company vehicle clean and organized at all times; preform pre & post trip vehicle inspections., • Perform all job functions in a safe and professional manner., • Performs other duties as assigned. Qualifications: • 3 years driving experience required, • Preferred 1-2 years’ experience in a customer service position, or a minimum of 1 year of related experience, • Valid Non-CDL Class C driver’s license (unless otherwise indicated by state), ensuring safe operation of company vehicles in accordance with traffic laws and conditions., • Must be able to lift 50 lbs. on a consistent basis, • Ability to operate or willingness to learn material handling equipment (box truck, handcarts, etc.), • Able to work independently, responsible for route, work unsupervised 98% of the work day In addition to competitive compensation and excellent benefits, successful employees in this position enjoy: • Comprehensive training, • Advancement opportunities, • Working in a fast paced environment, • Working independently, • Providing excellent customer service to established customers Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs). Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Maryland, Washington State, or to be performed Remotely, click here for information on additional company-provided time off benefits. About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. Canteen maintains a drug-free workplace. Req ID:1463048 Canteen

Job Description World Class Medicine. Purpose-Driven Partnership. Veritas Veterinary Partners offer exciting career opportunities in state-of-the-art facilities across the U.S. Our hospitals, open 24/7/365 and staffed by board-certified specialists, create a collaborative environment where you can work alongside like-minded, caring professionals. If you're passionate about veterinary medicine, this is your chance to thrive in a dynamic, high-quality setting. At Veritas Veterinary Partners, our mission is to build a network of trust and opportunity for veterinary professionals nationwide. We specialize in supporting Specialty and Emergency care hospitals, aligning with your unique goals and medical standards. Veritas, founded by Thomas Scavelli, DVM, DACVS, is dedicated to recruiting top-tier talent and fostering collaboration within our community. With a focus on exceptional care, we bring together highly trained veterinarians, technicians, and teammates committed to our patients' well-being. We believe in Truth in Medicine and Trust in Partnerships, ensuring we always provide the highest standard of care. Come join us and make a meaningful impact on the community you serve. Garden State Veterinary Services is excited to announce we are hiring Veterinary Client Services - Overnight to support our busy hospital. If you enjoy being a part of a team of compassionate, dedicated staff members committed to helping animals, then we want to hear from you! Schedule: Friday - Monday, 12am - 9:30am or Friday - Tuesday, 12am - 8:30am The Veterinary Client Services - Front Desk is one of the most important positions in our emergency/specialty practice as you are on the front lines, there to greet each client who walks in the door, setting the stage for a positive client experience. Our CSRs are ambassadors of GSVS and will be responsible for checking clients in and out of the hospital, booking appointments, taking payments, and fielding busy phone lines. This position requires experience in a fast-paced customer facing role, and while veterinary experience is preferred, we would happily train and invest in the right candidate. About GSVS: We are a multispecialty practice with boarded specialists in cardiology, internal medicine, surgery, radiology, and critical care. Our clients and patients also have access to ophthalmology, oncology, radiation oncology, neurology, dermatology, and radioactive iodine treatment via our affiliated practice in Eatontown, NJ. Why GSVS: We are not your typical veterinary hospital! We know the winning recipe to maintain the care and compassion that our patients depend upon us for, is to create a safe and supportive space for you to put your skills to use, develop new skills, and be a part of our highly collaborative, fun, and friendly team! We are proud of our company culture and positive staff engagement within a fast paced, learning environment; and our associate employment longevity is proof of our commitment to take care of one another, and provide the highest standard of care to the patients we serve. About you: • Experience with customer service and veterinary required, • Strong customer background preferred, • Excellent communication skills are expected as you will often act as a liaison between the clients and the clinical staff, • Ability to answer multiple phone lines, • Data entry and attention to detail, • Comfort with taking deposits and discussing financial questions with clients, • Empathy and compassion for our clients, • Ability to be discreet and professional when appropriate, • Ability to work in a highly collaborative environment and commitment to develop long-term relationships with colleagues, clients, and community, • Positive outlook and ability to work well in a collaborative environment GSVS is proud to offer the following benefits: • Competitive salary based on your level of experience, • Health, dental, and vision insurance, with HSA option- some plans paid 100%, • Maternity/Paternity leave, • Retirement Plan - 401K with employer match, • Employee Referral Bonus, • Paid Time off, • Mental health support with Talkspace, • Uniforms provided Veritas Veterinary Partners is an equal opportunity employer. In accordance with the requirements of all applicable federal, state and local laws, we welcome and encourage diversity in the workplace regardless of race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Applicants must be authorized to work in the U.S. All current positions require the ability to speak, read, and write English proficiently. Additional fluency in other languages is preferred but not required. For CA applicants please visit our Privacy Policy

Job Description General Purpose of Position: Reporting to the Customer Service Manager, the CSR will be a self-motivated individual with strong organizational skills, detail-oriented and be able to work in a fast-paced office environment as an individual or with their team. This role supports the Sales Operation and acts as a liaison between Sales and all divisions that are responsible for fulfilling the Work Orders (WO), including Planning, Production, Accounting, and Shipping. The CSR should possess strong communication skills and enjoy interacting with a diverse group of people. If you are a motivated individual with a passion for providing excellent customer service, we would love to hear from you. Please apply with your resume and cover letter detailing your relevant experience. Job Duties and Responsibilities: • Responsible for creating a Work Order (WO) for each purchase order (PO) received via email, fax, or phone., • Will utilize all resources available to generate, manage, and track all WO’s and accounts as well as ensure accuracy of WO, by using SalesPad software, equipment manuals, price sheets, equipment training and /or utilizing sales staff., • Processing orders with a sense of urgency for rapid shipment., • Will work collectively with other departments to collect and communicate, both to sales team and/or dealer/customer, information related to WO fulfillment, such as Estimated Shipping Date (ESD), availability and other information., • Work closely with Accounting to ensure product can be released and there are no credit holds., • Interact and respond to assigned salespeople and their respective dealers, by phone and/or email within their service level., • Respond to general inquiries regarding Company equipment and parts., • Will effectively use Microsoft Office Suite – Word, Excel, and Outlook to review, document, and provide reports as needed to department manager or sales manager., • Other duties as assigned by management., • Proficiency in Microsoft Office Suite, including Excel, Outlook, and Word, • Experience working with CRM and ERP systems, such as SalesPad, Great Plains, or similar CRM software platforms preferred., • Excellent organizational and interpersonal skills combined with strong drive to participate in a positive work environment., • Possess excellent reading, writing and verbal communication skills., • Strong attention to detail and accuracy., • Excellent organizational and time management skills., • Must possess excellent soft skills required to deliver a best in class customer service experience, including but not limited to effective listening, using empathy when needed, having a sense of urgency, being respectful, willing to help, etc., • Demonstrated ability to deliver exceptional customer service through empathy, responsiveness, and follow through., • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off, • Vision insurance, • Life Insurance Job Type: Full-time Pay: $19.00/hour Expected hours: 40 per week Shift: • 8 Hour Shift, • Day Shift *TAKARA BELMONT USA, INC. IS A DRUG-FREE WORKPLACE. Company DescriptionManufacturing CompanyManufacturing Company

Job Description Doyle Security Services is seeking to hire full-time UNARMED SECURITY OFFICERS in Edison, NJ. This position ensures that our clients and their facilities are secure. Our security officers are trained for a number of different posts and length of work. PAY RATE: $16.75 per hour SHIFT AVAILABLE: • Saturday-Tuesday 11PM to 7AM, • Paid Time Off ( PTO), • Medical Plan, • Vision Plan, • Dental Plan, • 401 K, • Life Insurance, • Career Development Opportunities MINIMUM QUALIFICATIONS AT ENTRY • Must be at least 18 years of age, • Must have a valid NJ Guard License, • 1-3 Years Retail Security Experience A Plus, • Must be available to work weekends, • Must be able to stand for long periods of time, • Must have exceptional Customer Service Skills, • Must be able to verbally de-escalate situations, • Reliable transportation, • Must be able to understand the English language and communicate it effectively in both the verbal and written form ABOUT DOYLE SECURITY SERVICES Doyle Security Services (DSS) is a leading provider of customized security solutions and investigative services. Our team focuses on protecting our clients' people, property, and peace of mind. We are committed to professionalism and integrity, and we strive to positively impact our nation, communities, and stakeholders. We differentiate ourselves by attracting the best people, offering innovative solutions, and fostering long-term partnerships. Being employee-centered, we work hard each and every day to provide our employees with the best work environment in the industry. Doyle Security Services, Inc. is committed to providing exceptional services and solutions to our clients and need your extraordinary work ethic to do so! EOE/Minorities/Females/Vet/Disability Doyle Security Services is an Equal Opportunity Employer committed to hiring a diverse workforce. Job Posted by ApplicantPro

Job Description At Redefine Healthcare, we believe in providing all patients with the highest quality of care and compassion. With our dedicated team of Neurosurgeons, Interventional Pain Management Specialists, Orthopedists, Psychiatrists, Physical Therapists, and Chiropractors, we pride ourselves on specializing in continuity of care for our patients. We are excited to add Vascular to our growing list of specialties. Redefine Healthcare is looking for a dedicated, full -time Medical Assistant to join our expanding team of healthcare professionals in our Oakhurst, Toms River, and East Brunswick Offices. The Medical Assistant will support patient care by documenting patient histories, assisting with in-office procedures, and responding to patient inquiries. They will also manage order entries, ePrescribing, and other administrative tasks, working closely with healthcare providers in a multi-specialty setting. We are looking for candidates who are motivated, compassionate, and are looking to advance their career in a community that is always growing. Job Title: Medical Assistant Pay Rate: $21-25/ hour depending on specialty and experience Hours: 40 hours per week Job Type: Full-time Benefits: Paid time off, sick time, health insurance (medical, dental, vision, accident, and critical illness), life insurance, 401(k) with Company match, yearly bonus Job Title Duties (not limited to): • Preparation of documentation required for patient appointments., • Use of EHR (documenting patient history, vitals, test results, exam findings, plans as instructed by provider)., • Order entry and submission (ePrescribing, labs and imaging studies, interventional procedures, etc.), • Assist with in-office injections., • Assist with casting, splinting, and suturing., • Respond to patient calls and inquiries., • Respond to pharmacy refill inquiries., • Any and all other tasks as directed by providers. Minimum Level of Education or Experience Required: • Certified Medical Assistant with a minimum of 2 years’ experience., • Must be bilingual in English and Spanish, • Solid working knowledge of EHR systems; Athena knowledge a plus., • Strong written and oral communication skills., • Ability to work in a team setting.

Job Description Job Description Date 06/2025 Location 1300 Airport Road, New Brunswick, NJ Title Material Handler Department Warehouse Reports to Manager, Warehouse FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Material Handler will perform all functions related to receipt of goods, put-away into warehouse, replenishment of pick areas, manual order processing, order auditing, shipment preparation, pallet building, truck loading and cycle counting inventory. Responsible for transporting goods from one place to another using heavy or tractor-trailer trucks. Load / unload cargo and assist in warehouse operations as needed. All functions may require use of powered industrial trucks, SAP or RF as needed. It’s a floater position between different locations. Areas of Responsibility • Receives product from domestic and overseas vendors, transfers, customer returns, refused shipments, and non-inventory support products., • Performs order fulfillment duties to include reviewing and prioritizing available orders, determining stock requirements and maintaining levels of required inventory, physically picking and packing orders, auditing and verifying picked orders, preparing completed orders for shipping, using SAP and RF as needed., • Performs shipping duties to include: Locating pallets to the dock, performing dock audits, verifying driver information, loading shipments on to trucks, properly filling out and signing BOL, tracking shipments, using SAP and RF as needed., • Transport finished goods and raw materials over land to and from manufacturing plants or retail and distribution centers., • Inspect vehicles for mechanical items and safety issues and perform preventative maintenance., • Report defects, accidents, or violations., • Plan routes and meet delivery schedules. Collect and verify delivery instructions., • Document and log work/rest periods and miles spent driving and retain fuel/toll receipts., • Comply with truck driving rules and regulations (size, weight, route designations, parking, and break periods) as well as with company policies and procedures., • Maneuver trucks into loading or unloading positions, • Responsible for maintaining and storing equipment, keys, refueling the truck, gas, expenses and to notify management of any breakdowns or maintenance issues., • Ensure safety and quality standards are consistently followed., • Responsible for maintaining and storing equipment, keys, refueling the truck, gas, expenses and to notify management of any breakdowns or maintenance issues., • All drivers must be familiar with and perform a daily pre trip and post trip inspection on their truck., • Performs shipping duties to include: Locating pallets to the dock, performing dock audits, verifying driver information, loading shipments on to trucks, properly filling out and signing BOL, packaging slips and verifying documents are matched, tracking shipments, using SAP and RF as needed., • Ensure safety and quality standards are consistently followed, comply with all DOT regulations., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOPs at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Maintain proper gowning and hygiene to ensure integrity of the product as per company policies., • Works extended hours and occasional weekend overtime., • Works in a safe and responsible manner to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements. Education & Qualification: • High school graduate or GED equivalent, • 2+ years in distribution/warehousing, • Proven work experience as a truck driver. Minimum 2+ years’ commercial driving experience or driving a box truck, • Extensive knowledge of applicable truck driving rules and regulations, • Valid truck driving license and no recent moving or driving violations, • Ability to drive long hours and travel regularly, • Extensive knowledge of applicable truck driving rules and regulations, • Adaptability and foresight to handle unexpected situations (traffic, weather conditions etc.), • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards etc., • Mechanically inclined to understand inner workings of equipment., • Demonstrates the ability to read and write basic English in order to be able to understand the industry regulated instruction sheets., • Must have ability to lift heavy items up to 70 pounds. Must be able to load and unload heavy objects in and out of vehicle, requiring upper body strength and physical stamina., • Work is regularly performed in a truck cab with exposure to hot and cold weather and driving conditions influenced by rain and snow. Employees are exposed to environmental odors, noise, and fumes, etc. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 2nd shift: 3:00 PM - 11:00 PM

Job Description Job Description Date 06/25 Location 1300 Airport Road, North Brunswick NJ Title Driver Department Warehouse Reports to Manager, Warehouse FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Truck Driver will be responsible for transporting goods from one place to another using trucks. Load / unload cargo and assist in warehouse operations as needed. All functions may require use of powered industrial trucks. Areas of Responsibility • Receives products from domestic and overseas vendors, transfers, customer returns, refused shipments, and non-inventory support products., • Accurately audits and verifies all incoming quantities for entry into computerized inventory., • Performs on and off-site warehousing duties to include: the initial movement of materials to appropriate locations, effective space utilization, and material retrieval delivery, using powered industrial equipment as needed., • Performs order fulfillment duties to include reviewing and prioritizing available orders, determining stock requirements, and maintaining levels of required inventory, physically picking, and packing orders, auditing, and verifying picked orders, preparing completed orders for shipping., • Transport finished goods and raw materials over land to and from manufacturing plants or retail and distribution centers., • Inspects vehicles for mechanical items and safety issues and perform preventative maintenance., • Plans routes and meet delivery schedules., • Documents and log work/rest periods and miles spent driving and retain fuel/toll receipts., • Complies with truck driving rules and regulations (size, weight, route designations, parking, and break periods) as well as with company policies and procedures., • Maneuvers trucks into loading or unloading positions., • Collects and verifies delivery instructions., • Reports defects, accidents, or violations, • Performs shipping duties to include Locating pallets to the dock, performing dock audits, verifying driver information, loading shipments on to trucks, properly filling out and signing BOL, packaging slips, and verifying documents are matched, tracking shipments., • Ensures safety and quality standards are consistently followed, complying with all DOT regulations., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times., • Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Responsible for maintaining and storing equipment, keys, refueling the truck, gas, expenses and to notify management of any breakdowns or maintenance issues., • All drivers must be familiar with and perform a daily pre trip and post trip inspection on their truck., • Maintains proper gowning and hygiene to ensure integrity of the product as per company policies., • Works extended hours and occasional weekend overtime., • Helps on the floor to assist Material Handlers and drive the forklift both sit down and stand up as needed, • Safety shoes are required to be worn for this position., • Works in a safe and responsible manner to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements. Education & Qualification: • High school graduate or GED equivalent, • 2+ years in distribution/warehousing, • Minimum of one (2) year work experience in nutritionals, supplements, food or pharmaceutical manufacturing industries preferred., • Proven work experience as a truck driver. Minimum 2+ years’ commercial driving experience or driving a box truck., • Must be able to pass a physical exam., • Hands-on experience with electronic equipment and software (GPS, AVL units, CB etc.), • Ability to drive long hours and travel regularly., • Extensive knowledge of applicable truck driving rules and regulations, • No recent moving or driving violations., • Adaptability and foresight to handle unexpected situations (traffic, weather conditions etc.), • Must pass CDL physical exam., • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards etc., • Mechanically inclined to understand the inner workings of equipment., • Demonstrates the ability to read and write basic English in order to be able to understand the industry regulated instruction sheets., • Prior forklift driving and ticketing experience needed., • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift., • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Work is regularly performed inside a manufacturing environment where temperatures can be Low, moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 1st - 7:30am to 4:00pm

Job DescriptionSalary: $35-$45 p/h - Based on experience Come join a team that has been in business for over 39 years! We take great pride in our exceptional reputation in the commercial HVAC industry built on the quality of our work and the dedication of our loyal employees. We offer a comprehensive benefits package, competitive salaries, and company-sponsored events throughout the year. Our leadership team is transparent about the direction of the company and our goals, so every team member understands where were headed. We invest in our people and training, and were looking for individuals who think outside the box and want to grow with us. If this sounds like you, keep reading! POSITION SUMMARY: Critical thinker and self-starter, willing to go the extra mile and stay committed to educating themselves in our constantly changing field. Candidates should have extensive experience with laying out and installing of heating, cooling, ventilation, piping and refrigeration systems. Candidates should also be comfortable working with little to no supervision and possess a strong work ethic and team mindset Requirements and Qualifications: • Minimum 5 years of Commercial HVAC/R installation experience (We are not seeking entry-level applications or those with residential experience only), • Experience Including, but not limited to;, • Split Systems, • Package Units, • Ductless Systems, • Heat Pumps, • Cooling Towers, • Boilers, • PTAC units, • VAVs, • Variable Refrigerant Flow (VRF) systems, • Chillers, • Certification through the Environmental Protection Agency to handle refrigerants required (Universal or Type I & Type II, 410A), • High School diploma or GED equivalent, • Knowledge of hand cutting tools, electric saws, and electrical and gas equipment., • Safety-minded and knowledge of OSHA & NFPA safety regulations., • Current valid drivers license for operating motor vehicles in the state of New Jersey, • Must be punctual, dependable and adhere to a daily schedule with multiple appointments in different locations, • Must be available for seasonal overtime during the summer and winter months, • Must have professional appearance, basic writing and computer skills, customer service skills, • Must have strong installation skills with ability to think outside of the box, • Experience with commercial pipefitting is a plus,, • PVC, Grooved, Threaded, Copper (Sweat, Pro-Press, Brazed), Welded Pipe Working Conditions: Pushing, pulling, and lifting various types of equipment. Walking, standing, and stooping for extended periods of time. Climbing and working from ladders and staging while carrying equipment that may weigh up to 75 lbs. Working at difficult angles to perform repairs. Working in all types of weather conditions. May be exposed to dust, noise, heat, cold, lubricants, and chemicals during the course of work. The above statements are intended to describe the general nature and level of the work being performed by people assigned this job. They are not an exhaustive list of all duties, responsibilities, knowledge, skills and abilities associated with the job. Job Type: Full-time and project location based, 7AM - 3:30PM Daily We are a drug free company and require all employees to pass a drug test prior to beginning employment Company Benefits: • Competitive Industry Salary based on experience and training, • Paid Vacation Days, • Paid Sick Days, • Paid Holidays, • Health Care (contributory), • Dental Plan (employer paid), • Vision Insurance, • 401K Matching, • Pretax Flexible spending account (FSA), • Cell Phone, • Company Issued Uniforms, • Company Issued EZ-pass, • Technician Training (In-House & School Based), • Company Vehicle if eligible, • Employee Referral Program, • Overtime available, • Company Events

Job Description At Mobile Air & Power Rentals, we provide innovative cooling, heating, dehumidification, and power solutions for our customers nationwide. We rent out a vast array of equipment, including portable air conditioners, chillers, heaters, and generators, helping clients save time and money while enhancing their operations and memorable events. We are immediately hiring Service Technicians to join our dynamic team, all levels available starting at Entry Level up to Senior Technicians. Why Mobile Air? Here are some of the perks & rewards: • Full-time positions with overtime and weekend opportunities, • Competitive hourly pay with quarterly bonus opportunities, • Health, Vision, and Dental Insurance, • Life Insurance, • 401k with company match, • Paid time off (vacation, sick days, holidays), • Career development and advancement potential, • As a representative of Mobile Air, you will coordinate the delivery, installation, and servicing of our rental equipment., • Process customer orders received from sales or the branch manager, ensuring timely fulfillment and delivery., • Deliver exceptional customer experiences that foster repeat business., • Install and connect heating equipment to natural gas or propane sources and set up flexible ductwork for temporary applications., • Utilize appropriate PPE and fall protection at all times to ensure safety., • Perform initial equipment startup and necessary service repairs, and retrieve equipment from customer locations upon rental completion., • Conduct equipment reconditioning per established work instructions and document returned items, ensuring proper storage in the branch warehouse., • Experience levels ranging from 0-5 years are welcome., • A high school diploma or GED is required; a 2-year HVAC certificate or Universal Refrigeration Certificate is preferred for higher-level technicians., • Proficiency with Microsoft Office products; familiarity with MRP or rental software is an advantage., • Must pass a DOT physical and drug test to operate company vehicles., • Valid driver’s license with a satisfactory motor vehicle report (MVR)., • Candidates must be willing to undergo a background check prior to employment, • Ability to lift/move up to 50 lbs. using safe lifting practices., • Strong customer service aptitude, effective communication skills, and mechanical knowledge. #LI-Onsite

Job DescriptionSummary: We are representing a commercial HVAC contractor hiring a full-time Service Technician to handle installation, troubleshooting, and repair of HVAC and refrigeration systems across New Jersey. The ideal candidate brings strong mechanical knowledge, excellent problem-solving skills, and is comfortable managing multiple daily service calls independently. This is not an entry-level role—applicants must have solid commercial HVAC experience (not residential-only) and EPA certification. Key Responsibilities: * Perform service, repair, and maintenance on HVAC/R systems across multiple job sites per day * Diagnose issues and conduct performance tests using multimeters, gauges, and specialty tools * Install and repair equipment including split systems, package units, ductless systems, VAVs, PTACs, chillers, and heat pumps * Handle refrigerant recovery and charging per EPA guidelines * Conduct preventative maintenance visits and promote ongoing service contracts to clients * Maintain a clean, organized work area at all times and follow site safety protocols * Document all work and communicate findings clearly with customers and office staff * Participate in emergency on-call service rotation (1x/month with additional pay and overtime) Qualifications: * 3–5 years of commercial HVAC service experience (residential-only background not accepted) * EPA certification required (Universal or Type I & II) * Trade school or technical HVAC program preferred * Skilled in electrical testing, refrigerant diagnostics, control troubleshooting (Distech a plus) * Ability to read electrical schematics and service manuals * Familiarity with commercial units, chillers, compressors, piping, motors, and controls * Must hold a valid NJ driver’s license and have clean driving record * Willing to work overtime during peak seasons and participate in monthly on-call rotation * Punctual, professional, customer-focused, and self-motivated Compensation + Benefits: * Competitive salary based on experience * Health, dental, and vision insurance * 401(k) with matching * PTO including vacation, sick days, and paid holidays * Company vehicle and EZ-Pass (if eligible) * Company-issued uniforms and cell phone * Ongoing training (in-house & school-based) * Drug-free workplace (pre-employment drug test required)

Job Description Job Description Date 06/25 Location 1300 Airport Road, North Brunswick NJ Title Operator, Tablet Coating 1 Department Standard Manufacturing Reports to Supervisor, Production FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Tablet Coating Operator is responsible for the operation and set-up of compression machines in accordance with company standard operating procedures (SOPs) and cGMP regulations to ensure products meet applicable quality standards. This position includes set-up, operation, cleaning, and light mechanical adjustments. The Coating Operator is accountable for overall process performance including safety, quality, shrink, attainment, and efficiency. Operators must be capable of operating multiple like machines at one time and learning to operate a variety of equipment within the manufacturing area. Areas of Responsibility Level 1 • Manufacture Production batches according to Batch Records, SOP’s, and cGMP guidelines to ensure product specifications and tolerances are met., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Check spray nozzles, piping, air pressure and boiler before start of the batch., • Observes machines gauges and equipment calibration status and reports any deviations to production supervisor., • Capable of running the following pieces of equipment/activity, • Accela Coater – 48” & 60”, • Coating medium/solution preparation, • Responsible for proper data entry in all batch record and logbook; and in process check control during coating process., • Perform all related materials handling pertaining to the products being coated., • Checks and verifies weight of tablets received from compression and reports deviations., • Correctly document all steps on batch record., • Adhere to all company policies., • Maintain proper gowning and hygiene to ensure integrity of the product as per cGMP’s and company policies., • Perform cleaning of equipment and processing room and dispose of rejected tablet and powder as per compliance requirements., • Knowledgeable in the relationship between spray rate, and inlet temperature, atomizing pressure, bed temperature, pan speed, and gun to bed distance., • Meets all safety expectations and follows all safety practices., • Works extended hours and occasional weekend overtime., • Manufacture Production batches according to Batch Records, SOP’s, and cGMP guidelines to ensure product specifications and tolerances are met., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Check spray nozzles, piping, air pressure and boiler before start of the batch., • Observes machines gauges and equipment calibration status and reports any deviations to production supervisor., • Capable of running the following pieces of equipment/activity as well as train on new equipment, including troubleshooting equipment and accessories:, • Accela Coater – 48” & 60”, • Coating medium/solution preparation, • Utilizes problem-solving skills to investigate and troubleshoot product issues and recommend solutions for: 1) coating issues such as sticking twinning, orange peel, film peel, blistering, surface edge erosion and over - wetting 2) general issues such as coating pan set up, performance, documentation, and material issues., • Responsible for proper data entry in all batch record and logbook; and in process check control during coating process., • Perform all related materials handling pertaining to the products being coated., • Checks and verifies weight of tablets received from compression and reports deviations., • Assist in the investigation of batch record deviations., • Correctly document all steps on batch record., • Adhere to all company policies., • Maintain proper gowning and hygiene to ensure integrity of the product as per cGMP’s and company policies., • Perform cleaning of equipment and processing room and dispose of rejected tablet and powder as per compliance requirements., • Knowledgeable in the relationship between spray rate, and inlet temperature, atomizing pressure, bed temperature, pan speed, and gun to bed distance., • Meets all safety expectations and follows all safety practices., • Works extended hours and occasional weekend overtime., • Manufacture Production batches according to Batch Records, SOP’s, and cGMP guidelines to ensure product specifications and tolerances are met., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Check spray nozzles, piping, air pressure and boiler before start of the batch., • Observes machines gauges and equipment calibration status and reports any deviations to production supervisor., • Capable of running the following pieces of equipment/activity as well as train on new equipment, including troubleshooting equipment and accessories:, • Accela Coater – 48” & 60”, • Coating medium/solution preparation, • Assist in the revision and creation of department SOP’s., • Utilizes problem-solving skills to investigate and troubleshoot product issues and recommend solutions for: 1) coating issues such as sticking twinning, orange peel, film peel, blistering, surface edge erosion and over - wetting 2) general issues such as coating pan set up, performance, documentation, and material issues., • Responsible for proper data entry in all batch record and logbook; and in process check control during coating process., • Perform all related materials handling pertaining to the products being coated., • Checks and verifies weight of tablets received from compression and reports deviations., • Assist in the investigation of batch record deviations., • Correctly document all steps on batch record., • Adhere to all company policies., • Maintain proper gowning and hygiene to ensure integrity of the product as per cGMP’s and company policies., • Perform cleaning of equipment and processing room and dispose of rejected tablet and powder as per compliance requirements., • Knowledgeable in the relationship between spray rate, and inlet temperature, atomizing pressure, bed temperature, pan speed, and gun to bed distance., • Meets all safety expectations and follows all safety practices., • Works extended hours and occasional weekend overtime., • Works in a safe and responsible manner to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements. Education & Qualification: Level 1 Pay Rate: $21.00 - $25.00 • High school graduate or GED equivalent Pay Rate: $23.00 - $28.00 • High school graduate or GED equivalent, • 2-4 years of experience, • Operate 2 machines at one time, • A clear understanding of the principal coating pan operation. Pay Rate: $28.00 - $38.00 • High school graduate or GED equivalent, • 5+ years of experience, • Operate all machines., • Solution prep, able to coat / troubleshoot the problems for all products., • A thorough understanding of the causes and prevention of common coating problems., • Responsible for training, • N/A Skills & Ability • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards, etc., • Mechanically inclined to understand the inner workings of the equipment., • Demonstrates the ability to read and write basic English to be able to understand the industry-regulated instruction sheets., • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 2nd shift: 3:15 PM - 11:45 PM

Job Description World Class Medicine. Purpose-Driven Partnership. Veritas Veterinary Partners offer exciting career opportunities in state-of-the-art facilities across the U.S. Our hospitals, open 24/7/365 and staffed by board-certified specialists, create a collaborative environment where you can work alongside like-minded, caring professionals. If you're passionate about veterinary medicine, this is your chance to thrive in a dynamic, high-quality setting. At Veritas Veterinary Partners, our mission is to build a network of trust and opportunity for veterinary professionals nationwide. We specialize in supporting Specialty and Emergency care hospitals, aligning with your unique goals and medical standards. Veritas, founded by Thomas Scavelli, DVM, DACVS, is dedicated to recruiting top-tier talent and fostering collaboration within our community. With a focus on exceptional care, we bring together highly trained veterinarians, technicians, and teammates committed to our patients' well-being. We believe in Truth in Medicine and Trust in Partnerships, ensuring we always provide the highest standard of care. Come join us and make a meaningful impact on the community you serve. We are a busy 24/7 veterinary emergency and multi-specialty hospital seeking a friendly, organized, and personable Patient Greeter to join our team. This entry-level role plays a crucial role in creating a welcoming environment and improving patient flow by assisting clients as they arrive. About GSVS: We are a multispecialty practice with boarded specialists in cardiology, internal medicine, surgery, radiology, and critical care. Our clients and patients also have access to ophthalmology, oncology, radiation oncology, neurology, dermatology, and radioactive iodine treatment via our affiliated practice in Eatontown, NJ. Why GSVS: We are not your typical veterinary hospital! We know the winning recipe to maintain the care and compassion that our patients depend upon us for, is to create a safe and supportive space for you to put your skills to use, develop new skills, and be a part of our highly collaborative, fun, and friendly team! We are proud of our company culture and positive staff engagement within a fast paced, learning environment; and our associate employment longevity is proof of our commitment to take care of one another, and provide the highest standard of care to the patients we serve. About you: • Greet clients warmly as they enter the hospital, • Ask basic questions to identify the purpose of the visit (emergency, specialist appointment, etc.), • Provide clients with registration forms and assist with basic instructions for completion, • Add arriving patients to our tracking system or team communication platform, • Notify triage technicians or clinical staff promptly when patients arrive, • Monitor the waiting area to ensure all clients are checked in and forms are collected, • Direct clients to appropriate waiting areas or departments, • Maintain a calm and professional demeanor in a fast-paced environment, • Assist with other light administrative tasks as needed, • No medical background or specialized training required, • Excellent interpersonal and communication skills, • Ability to stay calm and composed under pressure, • Strong organizational skills and attention to detail, • Comfortable using tablets, basic computer and typing proficiency, clipboards, • Sunday - Thursday, 8am - 4:30pm GSVS is proud to offer the following benefits: • Competitive salary based on your level of experience, • Health, dental, and vision insurance, with HSA option- some plans paid 100%, • Maternity/Paternity leave, • Retirement Plan - 401K with employer match, • Employee Referral Bonus, • Paid Time off, • Mental health support with Talkspace, • Uniforms provided For CA applicants please visit our Privacy Policy

Job Description Our marine construction company is seeking an experienced Civil Engineer to join our team and be part of our growing company. We offer several opportunities for advancement especially if you have experience in our line of work. Our portfolio includes numerous high-profile clients, if you are looking to expand and improve your work experience, this position is the perfect fit for you. Our firm primarily constructs commercial projects in and around the New Jersey waterfront, both fresh and saltwater, and constructs foundation structures state wide. The successful candidate will be responsible for overseeing the office and field engineering, e.g. analyze photographs, drawings and maps to assist in planning logistics, create designs that utilize a variety of materials for temporary support structures, templates, formwork and support of excavation. Communicate with team members, customers and vendors to ensure material needs are met on time and on budget, inspect project sites prior to bidding and after to ensure our plans for executing the work will be most efficient. Perform material take off and pricing for bids and work on hand. Track/execute submittals, RFI's, material purchases, extra work orders, etc. Basic requirements for this position include a Bachelor's Degree in Civil engineering, This is an entry level position, construction experience is a plus, a PE license or plans for a PE license is a plus, a working knowledge of AutoCad at a minimum, Excel, Word, Microsoft Office. We offer a competitive compensation package including health insurance and a salary commensurate with your experience. Company DescriptionBird Construction is managed by a team of seasoned professionals. Our passion is building marine structures with integrity, quality and commitment, backed by 53 years of experience. We go the extra mile on every project as client satisfaction is our key core value.Bird Construction is managed by a team of seasoned professionals. Our passion is building marine structures with integrity, quality and commitment, backed by 53 years of experience. We go the extra mile on every project as client satisfaction is our key core value.

The above statements are intended to describe the general nature and level of work being performed by people assigned to this job.

Commission structure: Tiered, based on meeting your monthly sales goal, up to 4% Additional incentive pay: SPIFF item list is updated monthly, earn up to $25+ per eligible item.Comoto Holdings is America's largest and fastest-growing omnichannel platform in the powersports aftermarket-products indus

The above statements are intended to describe the general nature and level of work being performed by people assigned to this job.

Clean and inspect equipment on the lot including checking fluid levels. Health insurance & Prescription plans, if eligible. MetLife auto and home insurance.

The above statements are intended to describe the general nature and level of work being performed by people assigned to this job.

Create, manage, and maintain key relationships with insurance agents, adjusters' other key relationships. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by associates assigned to this classification.

The Route Sales Representative closes sales through face-to-face interaction with customers based within assigned sales territories.They meet with potential and existing customers to present sales proposals and inform them of product benefits and features.The Route Sales Representative will play a k

Customer Service Representative.FASTSIGNS #123201 is hiring for a Customer Service Representative to join our team!.Ongoing Training Opportunities.A Successful FASTSIGNS Customer Service Representative Will:.Be the initial contact with current as well as prospective customers in our FASTSIGNS Center

Those who meet service or hours requirements are also eligible for: 401(k) match; medical/dental/vision; HSA; health care FSA; life insurance; short/long term disability; paid parental leave; paid holidays/vacation/sick; auto/home insurance discounts; scholarship program; adoption assistance. Benefi

Complete and apply training programs to maintain a high level of expertise of their role.

Cashier (Guest Service Expert).Our first Smashburger restaurant opened in 2007 with one single notion in mind; to serve a better burger! Better burgers takes better service, support and teamwork.That's why we treat our team members fairly in a diverse and safe environment.With an average of 10 resta

Implement cluster trainings and store-level events to maximize brand and product exposure in-stores. Drive store level events & market activations to support launches. Must have proof of insurance, current and valid driver's license, and reliable means of transportation.

Financial benefits include 401(k), stock purchase and company-paid life insurance.

We live sneakers, streetwear, and neighborhood culture! All Day! Every Day!.With more than 750 stores in Europe and the USA, SNIPES is one of the leading sneaker and streetwear retailers worldwide.Since opening its first store in Essen, Germany in 1998, SNIPES has been an integral part of street cul

They provide first level escalation for customer issues and assist in the supervision, coaching and training of other front end associates by participating in the training of new cashiers and utilizing all available tools to coach and develop other cashiers.

Benefits include Medical, Dental, Vision, Long/Short Term Disability, Life insurance, 401(k) with a company match.