Trabajos generator technician en North Bergen, New JerseyCrear alertas

Job Description Position: Maintenance Technician - Z Hotel NYC Long Island City, NY Job Description: The maintenance position repairs and maintains facility buildings and equipment. He/she repairs include building and room renovation, plumbing, painting, sheetrock work, electrical, and carpentry. This position also may require the completion of custodial work as necessary. To accomplish this job successfully, an individual must be able to perform, with or without reasonable accommodation, each essential function satisfactorily. Reasonable accommodations may be made to help enable qualified individuals with disabilities to perform the essential functions. Required Skills and Requisites: • High School Graduate or General Education Degree (GED): or Work Equivalent, • Experience in Maintenance Engineering and basic carpentry. Responsibilities and Duties: • Maintain timelines and work schedules in accordance with the preventive maintenance program., • Check work orders and night reports for any problems., • Make rounds checking these problem areas and note any information needed or safety concerns in the hotel., • Schedule work in accordance with preventive maintenance program in rooms, coordinating with the Executive Housekeeper and Front Office., • Perform electrical work orders: a) Replace light switches. b) Reset circuit breakers. c) Replace wall plug receptacles. d) Replace fluorescent light ballast. e) Replace the electrical solenoid valve. f) Replace small motors. g) Use test equipment; multimeter, voltage tester, amp probe., • Perform plumbing work orders: a) Unplug sinks, toilets, garbage disposals and drain lines. b) Repair or replace valves, gate, globe, ball, solenoid valves. c) Replace washer, gaskets, vacuum breakers, toilet seals. d) Work with different types of pipe including conduit, copper, black, cast iron and pipe hangers., • Perform Preventive Maintenance work orders: a) Monitor and maintain all laundry and dry cleaning equipment. b) Monitor and maintain all kitchen equipment. c) Maintain guestrooms using Rooms Preventive Maintenance Program Punch List. d) Change air-conditioning filters every month. e) Check HVAC equipment; change filters, belts, bearings and lubricate as necessary. Also check for unusual noise or vibration, adjusting as necessary. f) Change or repair locks as needed. g) Cut and mark keys for guestroom key inventory., • Check and test-run emergency generator weekly., • Perform general maintenance to guestrooms and public areas., • Assist electrician, carpenter, plumber and painter in all phases of repair work., • Assist other engineering personnel as instructed by supervisor in regards to routine and preventive maintenance, • Maintain cleanliness and organization of the work area to include: a) inventories b) requisition (receipt and storage) c) trash removal and clean up, • Maintain the proper use, cleaning, maintenance and storage of all tools. Handle chemicals for designated uses/surfaces., • Ensure security of any assigned keys. At Palette Hotels, we are dedicated to creating and sustaining meaningful hospitality careers for our associates. We support our associates with highly competitive salaries, outstanding health, benefits, extensive training and development programs, promotion within the organization, and a positive team-based culture where people make the difference. Palette Hotels, is an equal opportunity employer with policies prohibiting unlawful discrimination on the basis of any protected classification under applicable local, state and/or federal laws, which can include race, color, creed, sex, national origin, age, veteran status or physical or mental disability unrelated to job requirements. Palette Hotels policies also provide for a drug-free workplace, where the use, possession, or influence of illegal drugs or alcohol while on company time is generally prohibited. An employee's use (or abuse) of legally prescribed medication may also implicate company policy, where it impairs judgment or work performance or otherwise creates workplace safety risks. Palette participates in E-Verify to confirm that you are authorized to work in the U.S. only after a job offer is accepted and Form I-9 is completed. For more information on E-Verify, please visit the Everify website.

Job Description North Jersey Isuzu Trucks of Fairview, New Jersey is seeking Military Veterans with mechanical experience who are interested in beginning a rewarding career as an Isuzu Service Technician. This opportunity is part of the Isuzu Veterans Apprenticeship Program (IVAP), a U.S. Department of Labor and GI Bill®-approved Registered Apprenticeship program designed to help qualified Veterans transition into the commercial truck industry. Through IVAP, participants may gain hands-on dealership experience while working toward successful completion of apprenticeship and certification requirements. IVAP connects qualified applicants with participating Isuzu dealerships seeking skilled technical talent. Qualified applicants receive recruiting support, technical screening, dealership referral assistance, and guidance through the Registered Apprenticeship and GI Bill® benefits process, where eligible. What You Will Do As an Isuzu Service Technician Apprentice, you may support dealership service operations by assisting with the inspection, diagnosis, maintenance, and repair of Isuzu commercial vehicles. This may include working alongside dealership service teams, participating in on-the-job learning, and completing program-related apprenticeship requirements. Ideal candidates may have experience in one or more of the following areas: • Wheeled vehicle maintenance, • Diesel mechanics, • Heavy equipment maintenance, • Automotive repair, • Aircraft maintenance, • Generator maintenance, • Fleet maintenance, • Military maintenance supervision Requirements • Transitioning Service Member or U.S. Military Veteran status, • 3–5 years of military or civilian technician work experience, • Honorable military discharge or Commander’s Statement of Service, • Hands-on experience with diesel, automotive, heavy equipment, aircraft, generator, fleet maintenance, or related mechanical systems, • Ability to provide work references, • Clean driving record, as attested by the applicant, • Ability to complete the IVAP technical assessment, • Ability to pass applicable dealership background, driving record, or drug screening requirements Preferred qualifications include: • Diesel engine maintenance or repair experience, • Experience with commercial trucks, fleet vehicles, or heavy equipment, • Familiarity with diagnostic tools, hand tools, and shop equipment, • Experience working with electrical, braking, suspension, HVAC, or driveline systems, • ASE certifications, technical school training, or military maintenance training, • Strong troubleshooting, communication, and teamwork skills Benefits Isuzu IVAP Apprenticeship Highlights • Potential full-time employment with a participating Isuzu dealership, • Program designed specifically to support Transitioning Service Members and U.S. Military Veterans, • Participation in a U.S. Department of Labor and GI Bill®-approved Registered Apprenticeship program, where eligible, • Eligible Veterans may apply for and receive GI Bill® benefits during the apprenticeship, where eligible, • Access to tools, equipment, vehicles, and training needed to complete apprenticeship and certification requirements, as provided through the participating dealership and IVAP program structure, • Opportunity to apply military mechanical experience toward a civilian Isuzu Service Technician career, • Recruiting support, technical screening, dealership referral assistance, and apprenticeship process guidance Hiring decisions, wages, employee benefits, employment offers, and employment conditions are determined by the participating Isuzu dealership. Applicants are applying for employment with a participating Isuzu dealership and not with Isuzu Commercial Truck of America, Inc. or Educational Resource Systems, Inc. GI Bill® is a registered trademark of the U.S. Department of Veterans Affairs (VA). Use of the term does not imply endorsement, affiliation, or approval by VA.

Job Description Frank's Isuzu Truck of Lyndhurst, New Jersey is seeking Military Veterans with mechanical experience who are interested in beginning a rewarding career as an Isuzu Service Technician. This opportunity is part of the Isuzu Veterans Apprenticeship Program (IVAP), a U.S. Department of Labor and GI Bill®-approved Registered Apprenticeship program designed to help qualified Veterans transition into the commercial truck industry. Through IVAP, participants may gain hands-on dealership experience while working toward successful completion of apprenticeship and certification requirements. IVAP connects qualified applicants with participating Isuzu dealerships seeking skilled technical talent. Qualified applicants receive recruiting support, technical screening, dealership referral assistance, and guidance through the Registered Apprenticeship and GI Bill® benefits process, where eligible. What You Will Do As an Isuzu Service Technician Apprentice, you may support dealership service operations by assisting with the inspection, diagnosis, maintenance, and repair of Isuzu commercial vehicles. This may include working alongside dealership service teams, participating in on-the-job learning, and completing program-related apprenticeship requirements. Ideal candidates may have experience in one or more of the following areas: • Wheeled vehicle maintenance, • Diesel mechanics, • Heavy equipment maintenance, • Automotive repair, • Aircraft maintenance, • Generator maintenance, • Fleet maintenance, • Military maintenance supervision Requirements • Transitioning Service Member or U.S. Military Veteran status, • 3–5 years of military or civilian technician work experience, • Honorable military discharge or Commander’s Statement of Service, • Hands-on experience with diesel, automotive, heavy equipment, aircraft, generator, fleet maintenance, or related mechanical systems, • Ability to provide work references, • Clean driving record, as attested by the applicant, • Ability to complete the IVAP technical assessment, • Ability to pass applicable dealership background, driving record, or drug screening requirements Preferred qualifications include: • Diesel engine maintenance or repair experience, • Experience with commercial trucks, fleet vehicles, or heavy equipment, • Familiarity with diagnostic tools, hand tools, and shop equipment, • Experience working with electrical, braking, suspension, HVAC, or driveline systems, • ASE certifications, technical school training, or military maintenance training, • Strong troubleshooting, communication, and teamwork skills Benefits Isuzu IVAP Apprenticeship Highlights • Potential full-time employment with a participating Isuzu dealership, • Program designed specifically to support Transitioning Service Members and U.S. Military Veterans, • Participation in a U.S. Department of Labor and GI Bill®-approved Registered Apprenticeship program, where eligible, • Eligible Veterans may apply for and receive GI Bill® benefits during the apprenticeship, where eligible, • Access to tools, equipment, vehicles, and training needed to complete apprenticeship and certification requirements, as provided through the participating dealership and IVAP program structure, • Opportunity to apply military mechanical experience toward a civilian Isuzu Service Technician career, • Recruiting support, technical screening, dealership referral assistance, and apprenticeship process guidance Hiring decisions, wages, employee benefits, employment offers, and employment conditions are determined by the participating Isuzu dealership. Applicants are applying for employment with a participating Isuzu dealership and not with Isuzu Commercial Truck of America, Inc. or Educational Resource Systems, Inc. GI Bill® is a registered trademark of the U.S. Department of Veterans Affairs (VA). Use of the term does not imply endorsement, affiliation, or approval by VA.

Job Description Join a Family That’s Built to Last — and Grow. Mason Technologies has been a trusted leader in the low voltage industry for over 23 years and will continue to be for the next 150. If you're looking to join one of the most progressive and rapidly growing companies in the field, you're in the right place. With multi-year contracts and an ever-expanding portfolio of major projects, Mason offers unmatched stability and career potential. Tired of feeling stagnant in your current role? At Mason, we value experience, reward talent, and invest in our people. As we enter a new phase of unprecedented growth, we're seeking highly skilled AV service technicians to grow with us. Please Note: All applicants must have a reliable vehicle and possess a valid SST card (Site Safety Training) at the time of application. You will be required to upload a clear photo of your SST card along with your resume to be considered. Best-in-Class Benefits We believe in investing in our people and providing a comprehensive benefits package that supports you both on and off the job. • Medical, Dental & Vision Insurance, • 401(k) with Company Matching, • Paid Time Off (PTO) including holidays, vacation, sick, and personal time, • Union Affiliation, • Unlimited Opportunities for Growth and Career Advancement, • Competitive Compensation, • Ongoing Training and Professional Development, • Stable, Long-Term Career Opportunities Position Overview Mason Technologies is seeking an experienced AV / Overhead Paging Systems Service Technician to join our growing service team. This position is ideal for a technician with a strong background in commercial audio, overhead paging, intercom, and voice communication systems, particularly in hospitals, healthcare facilities, schools, commercial buildings, and other large institutional environments. The primary focus of this position is service, troubleshooting, repair, and maintenance of existing overhead paging and commercial audio systems. The ideal candidate will be comfortable responding to service calls, diagnosing system issues, tracing and testing cabling, troubleshooting amplifiers and controllers, repairing or replacing speakers and field devices, and identifying the source of audio or paging failures. Experience with Valcom, Rauland, Dukane, Bogen, AtlasIED, Algo, and other commercial paging and audio manufacturers is highly valued. This is a hands-on field service position. Candidates should be able to independently troubleshoot both the physical wiring and electronic equipment that make up a paging system. Experience servicing hospital or healthcare paging systems is strongly preferred. Responsibilities • Respond to service calls involving overhead paging, commercial audio, intercom, and voice communication systems, • Diagnose and troubleshoot paging system failures, including dead zones, low audio, distorted audio, intermittent paging, communication failures, and speaker issues, • Troubleshoot and service paging amplifiers, controllers, zone modules, power supplies, microphones, speakers, and related equipment, • Trace, test, and troubleshoot low-voltage audio and paging cabling, • Troubleshoot individual paging zones and identify faults within system infrastructure, • Install, replace, terminate, and repair ceiling speakers, wall speakers, horns, volume controls, microphones, and other paging devices, • Troubleshoot and service analog and IP-based paging systems, • Work with centralized and zoned overhead paging systems, • Diagnose issues involving audio distribution, amplifiers, speaker circuits, and zone control, • Perform point-to-point testing and use test equipment to isolate system faults, • Read and interpret audio system drawings, riser diagrams, schematics, wiring diagrams, and equipment documentation, • Perform equipment replacement, upgrades, and minor system modifications as required, • Assist with system commissioning, testing, and troubleshooting during installations and upgrades, • Document service findings, repairs, equipment replacements, and recommendations, • Communicate effectively with customers, facility personnel, Project Managers, and other technicians, • Work in active hospital and healthcare environments while following facility-specific procedures and requirements, • Maintain a clean, organized, and safe work environment, • Follow all company and job-site safety requirements, • Travel between customer and project sites throughout the Tri-State Area as required Qualifications • 4+ years of hands-on commercial AV, audio, paging, or low-voltage service experience preferred, • Strong hands-on experience with overhead paging and commercial audio systems, • Hospital, healthcare, institutional, or large commercial paging system experience strongly preferred, • Experience troubleshooting existing systems rather than solely performing new installations, • Experience with manufacturers such as Valcom, Rauland, Dukane, Bogen, AtlasIED, Algo, or comparable paging/audio systems, • Experience troubleshooting:, • Paging Amplifiers, • Zone Controllers / Zone Modules, • Ceiling and Wall Speakers, • Paging Horns, • Volume Controls, • Microphones, • Audio Distribution Equipment, • Power Supplies, • Analog and IP Paging Systems, • Ability to trace and troubleshoot low-voltage audio and paging wiring, • Ability to use a multimeter, tone generator, cable tester, and other electrical/audio test equipment, • Ability to read and understand audio drawings, riser diagrams, schematics, wiring diagrams, and system documentation, • Basic understanding of audio signal flow, impedance, speaker circuits, amplifiers, and distributed audio systems, • Strong troubleshooting and diagnostic skills, • Ability to work independently and respond professionally to customer service calls, • Strong communication skills and customer-service orientation, • OSHA and SST certifications required, • Reliable personal vehicle required, • Ability and willingness to travel to multiple customer and project sites throughout the Tri-State Area, • Ability to work safely on ladders, lifts, and in active commercial environments, • Must be able to pass a pre-employment background check and drug screening To Apply: Please complete the application form and attach both your resume and a clear photo of your physical SST card to be considered. Salary: $35.00–$50.00 per hour Job Type: Full-time, Field-based, On-Call

Job Description At PEARCE, we've got a career for you! Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit http://www.pearce-services.com. Your Impact: Are you a skilled and highly motivated Generator Technician who is looking to learn and grow in a fast-paced, challenging job in the Telecom industry? If so, Pearce has a career for you! Our Generator Technicians service and repair commercial generators on cell phone towers in your region. This role is a great match for independent, self-starters who are willing to travel. Core Responsibilities: • Maintaining generators, diagnosing and repairing problems, installing and replacing components or entire systems, and performing additional maintenance or upgrades on out-of-season equipment, • Conducting performance checks and regular maintenance on generators to ensure proper readiness, reading and following blueprints or other design specifications to install or repair, • Install fuel and water supply lines, pumps, electrical wiring and controls, and other components, and test for proper operation, • Be responsible for responding promptly/timely to Power/Generator alarms; have the ability to be on call 24/7 if necessary and respond promptly in answering assigned phone and email, • Perform work with the awareness of all potential hazards connected with the installation and maintenance of power supply equipment, switching gear, and other equipment, including but not limited to falls, electric shock, falling objects, and traffic; use safety equipment and utilize safety practices; attend and participate in all designated safety and training meetings Specific duties may vary or evolve over time based on business and client needs. Core Experience: • Two or more years of experience with generator maintenance is preferred and a minimum of one year of intense work-related experience with generator and electrical maintenance-related software, hardware, and processes, • Thorough knowledge of generator installations, maintenance, and repair of Generators; knowledge of electronic, mechanical, and electrical components; moderate computer skills, • Basic knowledge of pertinent FCC/FAA/EPA/OSHA regulations Physical/Work Environment: At Pearce safety is our number one concern. Candidates must be able to comply with OSHA Standards. • This position requires lifting over 50 pounds, stooping, bending, kneeling, squatting, climbing, and standing for long periods of time, • Must have the ability to inspect and/or troubleshoot equipment/alarms effectively, both visually and audibly, • Must be willing and able to drive long distances, workday, evening, or night hours; overtime, emergency callouts, weekends, and holidays as required; must assume 24-hour on-call duty when assigned and be gone from home for extended periods of time, • Must be able to pass a DOT physical At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range $30—$40 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Learn more about us at www.Pearce-Services.com!

Job Description The Powerhouse Generator Technicians responsibilities include but are not limited to the following major items. Primary Job Tasks Responsibilities: • Responsible for accurate record keeping related to the maintenance, testing and rebuilding of the generator sets as well as related emissions control devices., • Perform equipment PM maintenance as required based on the manufacture’s O/M manual., • Rebuild the generator set engines to factory specifications when required as per the manufacture’s O/M manual., • Perform load bank testing annually on the required engines for NESHAP Rice emissions testing requirements, • Keep an overall eye on powerhouse generators and related operating equipment. Address any issues in a timely manner., • Advise Chief Engineer and Assistant Chief Engineer of any issues as they arise., • Maintain a clean and safe work area., • Respond to any emergencies as needed., • Additional duties at the discretion of the General Manager and Chief Engineer. Qualifications: • 5+ years’ experience working on generators and engines, • Ability to read electrical schematics and blueprints, • Proficiency in using meters, analyzers and test equipment, • Working knowledge of load bank testing Preferred Requirements: • Experience in using all tools required to perform the work, • Ability to communicate and work well with others

Job DescriptionBenefits: • Medical, dental, and vision insurance., • Retirement plan., • HSA, FSA, and disability., • Paid time off and holidays., • Fleet vehicle. We are Energy Systems, the leader in industrial power solution sales, service, and rentals. With an ongoing tradition of providing excellent products and outstanding service for our customers, Energy Systems is one of the longest existing Generac Industrial Distributors in the United States. We are a full-service distributor of Generac equipment and solutions providing sales, service and rentals. What you’ll do: • Perform mechanical, electrical, troubleshooting, preventative maintenance and repair of generators during normal working hours and after hours., • Detect faulty operations, defective material and report them and any other unusual situations to the service manager in a timely manner., • Stays current on NFPA and State regulations for EPSS., • Travel around local area for service calls, on-call rotation with 50% travel (25% overnight). What you’ll bring: • High School Diploma or equivalent., • 4 years servicing and troubleshooting emergency power supply systems (EPSS)., • Working knowledge of mechanical design, AC and DC circuitry, power generation, wiring schematics, and connection diagrams., • Advanced knowledge of Engine maintenance and troubleshooting of natural gas or diesel fuel systems., • Valid driver's license. Bring your generator experience—Kohler, CAT, Cummins, Katolight, or Briggs & Stratton. Physical Demands:While performing the duties of this job, the employee is regularly required to stand. The employee frequently is required to use hands to manipulate objects, tools, or controls; and talk and hear. The employee is regularly required to walk; stoop; crouch; bend and reach above shoulders. The employee must frequently lift and/or move up to 50 pounds unassisted and up to 100 pounds with assistance, waist high, up to 10 feet away. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to discern color. The employee must comply with the assigned location PPE requirements including but not limited to safety glasses, hearing protection, appropriate gloves, clothing, and shields for required tasks and closed toed or safety shoes as required by facility safety policies. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Job Description We are seeking an experienced A Level Generator Field Service Technician in the New York City area, supporting all five boroughs, for our Power Generation Client!! Pay starts at $46/hr and goes up with experience, plus a $500/month housing stipend for metro NY techs, overtime, and full benefits. Day shift, Monday to Friday, plus an on-call rotation for emergency service. OSHA 30 is provided if you don't already have it. Are you the person for the job? If you can troubleshoot paralleling switchgear, transfer switches, and megawatt class gen sets, you are in demand right now, and the pay reflects it. What you will do: • Diagnose, repair, and commission diesel and gas generator sets from small standby units through 2MW and larger, • Troubleshoot paralleling switchgear, automatic transfer switches, and generator controls, • Run startups, load bank testing, and site acceptance on new installations, • Keep accurate service records and get critical sites back online fast What we are looking for: • 7+ years on industrial generators, or heavy-duty diesel with strong electrical controls depth, • Comfortable inside switchgear and control panels, reading prints and schematics, • Factory training on Kohler, Cummins, Cat, MTU, or Generac, EGSA certification a plus, • Clean driving record, your own hand tools, willing to carry an on-call rotation Why apply through LaTrae: • We place generator and critical power techs all day, so we know these employers and these roles, • A direct line to hiring managers, faster than applying cold, • Always free to you, the employer pays our fee, • Confidential, your current employer never knows you are looking Generator Technician, Generator Field Service Technician, Generator Service Technician, Power Generation Technician, Standby Power, Emergency Power, Critical Power, Backup Power, Diesel Generator, Natural Gas Generator, Genset, Gen Set, Switchgear, Paralleling Switchgear, Automatic Transfer Switch, ATS, Load Bank, Load Bank Testing, Commissioning, Startup Technician, EGSA, EGSA Certified, Kohler, Cummins, Onan, PowerCommand, Caterpillar, Cat, MTU, Detroit Diesel, Generac, Woodward, Deep Sea Electronics, DSE, ComAp, Basler, UPS Technician, Critical Facilities, Critical Environment Technician, Data Center Technician, Prime Power, 12P, 91D, Marine Generator, Diesel Mechanic, Diesel Technician, Diesel Tech, Industrial Maintenance, Maintenance Electrician, Electrician, Apprentice, Universal Technical Institute, UTI, Lincoln Tech, WyoTech, Military Technician, Veteran, OSHA 30, SST, Site Safety Training, Manhattan, Brooklyn, Queens, Bronx, Staten Island, Long Island City, Westchester, Yonkers, New Rochelle, White Plains, Hudson Valley, Jersey City, Hoboken Job Type: Full-time Benefits: • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insurance, • 401(k), • Housing stipend, • OSHA 30 training provided Schedule: • 8 hour shift, • 10 hour shift, • Day shift, • Monday to Friday, • On call, • Overtime, • Weekends as needed

Job Description Position purpose This position requires the knowledge and skills related to avionics/electronic systems including their function, theory of operation, testing, troubleshooting. Successful candidate will deliver discussion sessions and hold lab exercises associated with specific avionics and electronics courses. Major Responsibilities/Duties/Functions/Tasks • Answer student inquiries through email or a learning management system in an effective manner, • Recommend selection of textbooks and other instructional materials, • Engage in activities that facilitate student achievement of learning outcomes, such as ongoing feedback, and consultation as needed, • Collaborate with appropriate Student Services personnel to address perceived student issues, which may require special attention, • Attend scheduled department meetings, as required, • Hold on-site class instruction and lab exercises on scheduled basis, • Establish and maintain academic and attendance records for student files, • Submit attendance, grades, student evaluations, and all other required documentation and reports per established department procedures and deadlines, • Actively utilize proven student learning and retention techniques acceptable to the college., • Maintain a neat and orderly classroom and lab, • Assist Program Coordinator in development of curriculum related course materials and training aids, • Develop and improve discussion material and lab exercises as needed to maintain currency with technological trends, • Help students in acquiring practical skills related to conducting experiments and standardized testing of avionic systems, interpret results and prepare standard lab reports, • Collect assessment related data, prepare course assessment reports and utilize the results of assessment to improve student learning through the course by incorporating suitable action plan, • Work with the lab technician to perform equipment configuration audit and order supplies as needed, • Hold discussion sessions and conduct lab exercises, • Must be able to comply with program continuous improvement efforts and prepare formal course assessment reports as per the procedures established by the department, • Interact professionally with students, faculty and other employees **Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience Requirements • Master degree in Engineering, Engineering Technology or related field, or a combination of a Master degree with related avionics/electronics work experience. Professional Skills • Good written and verbal communication skills including class discussion using presentation software and classroom technology and equipment demonstration skills., • Knowledge of AC and DC Electronics, Solid State Electronics, Digital Electronics, Basic Wiring, Communication Theory, Navigation Systems, Gyroscopes and Autopilot Systems, Pulse Microwave Systems, and troubleshooting techniques. Knowledge of associated lab test equipment such as Oscilloscope, Multimeter, Function Generator, Frequency Counter, Power Meter and Spectrum Analyzer is a plus., • Familiarity with assessment of student learning outcomes, both course and program levels, according to the standards of Accreditation Board of Engineering and Technology is a plus. Reasoning Ability • Ability to assess the level of achievement of student learning outcomes through a given course, evaluate assessment data to draw inferences about the need for corrective action and prepare and execute any necessary corrective action plan through the course. Work environment and physical functions • This position is located in an office environment. Generally, an employee needs to be able to sit, stand, and navigate within the office area. The office equipment either individually used or shared with a department is the responsibility of all employees. Preferred: • Federal Communication Commission – GROL License, • ASTM NCATT AET Certification, • FAA Airframe and Power Plant License

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Fastenal - 1448 Ferris Place - Responsibilities: Manage and maintain branch inventory; Receive, pick, package, ship, and cycle count inventory; Make local deliveries with company vehicle; Maintain a clean and safe work environment; Perform other duties as needed.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Cardinal Health - - Responsibilities: Follow SOPs to process orders including picking/packing/shipping; Operate material handling equipment; Receive, scan with RF scanner, input data; Maintain inventory and housekeeping.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Aerotek - - Responsibilities: Weigh packages and label them appropriately; Operate sit-down forklift; Inspect packages and shipping containers; Assemble daily orders by shipping location; Maintain records of packages and shipments.

Schwan's Company - - Responsibilities: Move materials using carts, conveyors, pallet jacks; Stack pallets in designated areas; Clean and dispose of scrap materials; Place items in designated containers; Conduct material audits and counts.

Airport Terminal Services - - Responsibilities: lift up to 70lbs per mail handling unit; sort, scan, load/unload USPS mail containers and Airline cans; follow all Safety rules and Regulations; work assigned schedules including weekends and holidays.

One Hour Heating & Air Conditioning - - Responsibilities: Service, repair, and maintenance of residential and light commercial HVAC systems; Troubleshoot HVAC malfunctions and determine repairs; Maintain neat and clean work area and vehicle; Demonstrate safety-conscious attitude on job and while dri

WillScot Corporation - - Responsibilities: Conducting service calls related to HVAC, plumbing and carpentry within the Branch territory; Explaining repairs and services to customers courteously, over the phone and in-person; Maintaining a safe working environment and practicing safe working habits i

Grainger - - Responsibilities: Install and organize inventory systems in customer shops; Label, stock, and optimize maintenance products; Train customers on ordering technology; Travel Monday through Friday to U.

Axelon Services Corporation - - Responsibilities: Read and interpret electrical blueprints, schematics, and wiring diagrams; Layout, install, modify, and repair electrical wiring, control panels, transformers, circuit breakers, and other factory equipment; Troubleshoot and diagnose system failures

Kellermeyer Bergensons Services - 600 Washington Avenue - Responsibilities: Clean restrooms and break areas (indoor/outdoor); Sweep, mop, dust, and remove trash; Keep walkways clean and tidy at all times; Clean totes and other items; Perform deep cleaning as needed.

US Postal Service - - Responsibilities: Perform preventive maintenance and repairs on station equipment at the New Jersey facility.

Senior Industrial Maintenance Mechanic - Medico San Bernardino Job Category : Engineering - Department 37 and 38 Requisition Number : SENIO001188 Posted : September 23, 2026 Full-Time On-site Rate : $29 USD per hour Locations Showing 1 location San Bernardino, CA 92407, USA Description Compe

US Postal Service - - Responsibilities: Perform preventive maintenance and repair of USPS equipment.

Thermo Systems is a global control systems integration partner providing automation solutions.The role provides technical support for control system projects and service teams, with travel to client locations for installations, maintenance, or repairs.The ideal candidate has 0–3 years of experienc

Other duties as assigned Qualifications High School diploma or GED Minimum two (2) years field experience at the lead technician level maintaining industrial or commercial HVAC systems and components, in support of an industrial Preventive Maintenance Program.

NYU Langone Health - - Responsibilities: Assist nurses with patient care tasks and maintain safety and comfort on the unit daily; Assist with admission, transfer and discharge procedures; Perform phlebotomy, fingersticks for glucose, and electrocardiograms as assigned; Demonstrate infection prevent

Plant Mechanic to inspect, maintain, test and repair plant equipment and systems, ensuring safety and reliability.Duties include lubrication, alignment, vibration monitoring, and coordination with operations to minimize downtime.You will perform preventative maintenance, plan for outages, manage par

Illinois Tool Works - - Responsibilities: Install and service mechanical and electrical commercial food equipment; Diagnose and repair equipment on-site; Interpret schematic diagrams and service manuals; Perform preventative maintenance and document results; Maintain company assets and safety compl

Firestone - - Responsibilities: Hybrid role serving customers and performing basic vehicle services; Assist with store operations including opening/closing and inventory; Learn and operate store systems; Grow skills toward management opportunities; Balance front and back shop tasks to serve custome

Illinois Tool Works - - Responsibilities: Install basic mechanical commercial food equipment; Diagnose and repair basic mechanical equipment; Perform preventive maintenance; Document service activities; Adhere to safety procedures.

Electrical Testing, LLC seeks an entry-level Electrical Commissioning Technician 3 to assist in testing, maintenance, and installation of electrical equipment under close supervision. You will support more experienced technicians, gain foundational skills, and contribute to safe, compliant field ope

This role is primarily responsible for serving the customer through asses Service Technician, Service Tech, Technician, Sales, Customer Service, Retail Sales, Automotive. The retail Sales and Service Technician (SST) is a unique hybrid role for stores and is intended as a key pipeline for future car

Maryland Energy Advisors (MDEA) is a rapidly growing energy management firm delivering energy efficiency and sustainability programs for utilities and communities across the region.As part of our continued expansion, we are seeking a qualified Home Energy Auditor to support residential energy effici

The Technician Operations team is the live backbone of Meter's deployment engine, ensuring that we deliver critical infrastructure on time, to standard, and with zero friction for our partners and customers. By guiding field technicians in real time, troubleshooting issues as they happen, and buildi

Reporting to the Program Director, the Social Service Technician is responsible for providing thorough assessments and comprehensive case management for community participants who have court involvement in Jersey City Municipal Court.