Geotechnical jobs in Hoboken, New JerseyCreate job alerts

Overview Remedial Construction Services, L.P. is an environmental remediation, geotechnical construction, and civil construction contractor founded in 1989. We are a national leader in environmental remediation services, including soil remediation, soil stabilization and solidification, landfill cap and cell construction, permeable reactive barriers, deep soil mixing, biopolymer trenches, slurry walls and demolition of hazardous waste sites. Construction Laborers are responsible for performing tasks involving and related to physical labor onsite for environmental remediation, civil, geotechnical and demolition construction projects. Responsibilities Observe and comply with all company and specific site safety and project policies Supply input to Job Safety Analysis (JSA) and frequent improvements or changes to the Job Safety Analysis Plan (JSAP) Dig ditches or trenches, backfill excavations, compact and level earth to grade specifications, using picks, shovels, pneumatic tampers and rakes Clean, remove and prepare materials used on site to eliminate possible hazards Control traffic passing near, in and around work zones; signal equipment operators to facilitate alignment, movement and adjustment of machinery, equipment and materials Measure, mark and record openings and distances to layout areas where construction work will be performed Observe and comply with all company and specific site safety procedures and project policies, and maintain the construction site in strict accordance with OSHA guidelines Communicate professionally and respectfully with others by all means possible (visual or radio contact) including interpreting hand signals to determine where materials are to be placed or loaded May perform a variety of manual tasks for extended periods of time, including lifting, positioning and securing materials during installation Responsible for care and custody of tools being used, including daily cleaning and maintenance May perform other miscellaneous duties as assigned Qualifications Previous experience working in construction Must be able to travel as required over extended periods of time Must be able to operate construction tools by hand Must be able to preform the duties of a labor while using different levels of PPE and respiratory equipment, when necessary. Must be able to perform the duties of a laborer while working in all outdoor weather conditions Must have the ability to read, write and understand math and English to respond to customer requests and follow instructions Ability to lift up to 50 pounds regularly, climb, operate motorized vehicles and equipment, work in confined spaces, at heights and around heavy equipment required Must be able to work in a construction environment with potential exposure to dust, noise, waste, toxic and infectious materials and in possible inclement weather Education/Experience: High School diploma or equivalent required 40-Hour HAZWOPER training required for positions at most job sites (or current 8 Hour HAZWOPER refresher course) and MSHA certification preferred Previous construction industry experience preferred Recon is an Equal Opportunity Employer. We encourage qualified women, minorities, veterans, individuals with disabilities, and others to apply. Equal Employment Opportunity

Overview RECON has successfully completed over 6,000 environmental remediation, geotechnical and mine reclamation projects across North America since 1989. Our team of dedicated employees, financial strength, and large fleet of equipment empower RECON to deliver world class solutions for the complex environmental problems. The Site Engineer position supports field activities and assists Project Managers and Superintendents. They assist with project planning and tracking; material tracking and pricing; and project cost reporting, typically supporting one medium to large-size project. Site Engineers learns the fundamentals of Geotechnical Construction and field technical services. This is a field/project-based leadership position that is focused on site operations. The ideal candidate will be located on the East Coast of the United States and will spend most of their time on project sites throughout the Eastern region. Responsibilities Assists in managing the project schedule, supervises Quality Control (QC) and ensures compliance with QC requirements Coordinates Third Party QC services, implements RECON’s three phase QC program and prepares Daily Production Logs Track materials; perform QC on materials ordered and received Responsible for planning, scheduling, conducting, and coordinating the technical and management aspects of projects, prepares monthly project status reports and change orders Budget monitoring and trend tracking Observes and complies with all company specific site safety programs, assists the Site Safety Officer with accident/incident investigations, finds the root cause and suggests improvements Works independently and conducts tasks with limited supervision Qualifications Bachelor’s Degree in Civil Engineering, Construction Management, or similar type degree required Four years of engineering experience or similar trade; Construction field experience preferred Experience with surveying or CAD Experience using a GPS unit to layout and check working grades Experience demonstrating progressive increase in financial/supervisory accountability and authority Excellent written and verbal communication skills Knowledge of Microsoft Office products such as Word, Excel, and Project Must be self-motivated and able to work effectively with little or no direct supervision Must possess multi-tasking skills Additional Information Salary Range: $70,000.00 - $85,000.00 per year Actual salary will be based on a variety of factors including relevant internal and external experience, knowledge, skills, scope of job, geographical location or other factors permitted by law Benefits: 401(k) + matching Health, Dental, Vision insurance Life insurance Paid time off (PTO) Holiday Pay RECON is a Keller Company and offers a variety of employee benefits including competitive compensation; medical, dental and vision insurance; company paid vacation, sick leave, company paid holidays; 401K retirement plan with 6% company match, a casual dress code and work environment, and much more. Recon is an Equal Opportunity Employer. We encourage qualified women, minorities, veterans, individuals with disabilities, and others to apply.

Job Description Currently we are looking for Mechanical Inspectors for immediate Building & Infrastructure Projects Location: Greater New York City Metropolitan Area (Project Location Varies) Status: Part Time as Needed Duration: Extended Client: Varies Compensation: $45hr - $55/hr Based on Certification & Experience Mechanical Inspector Role Overview The Mechanical Inspector provides specialized inspection, verification, and testing oversight for mechanical and HVAC systems on Building & Infrastructure projects throughout the Greater New York City Metropolitan Area. This role supports both Quality Control (QC) and Quality Assurance (QA) programs in accordance with 1 RCNY §101-06, Chapter 17 of the NYC Building Code, the International Building Code (IBC), and applicable Mechanical Code and Energy Code requirements, as required by each project. The Mechanical Systems Inspector is responsible for verifying that mechanical systems, equipment, and associated components are installed in strict conformance with approved design documents, shop drawings, specifications, manufacturer requirements, and code provisions. Systems may include HVAC equipment, ductwork, piping, boilers, chillers, air handling units, exhaust systems, controls, and energy-related components. This role requires maintaining an active on-site presence during installation, testing, and commissioning activities, including witnessing functional performance testing, pressure testing, system start-ups, and test-and-balance (TAB) activities. The inspector coordinates closely with contractors, construction managers, commissioning agents, testing firms, and client representatives to ensure all required inspections and tests are performed at the appropriate stages of work. The Mechanical Systems Inspector plays a critical role in ensuring system performance, code compliance, life-safety coordination, energy efficiency, and operational readiness, proactively identifying non-conforming conditions, documenting deficiencies, issuing Non-Conformance Reports (NCRs), and verifying corrective actions and re-testing. • Work responsibilities may include but are not limited to the following:, • Inspection of HVAC equipment installation, supports, and clearances, • Verification of ductwork, piping, insulation, and labelling, • Inspection of boilers, chillers, pumps, and mechanical room installations, • Verification of fire/smoke dampers and coordination with fire protection systems, • Oversight of controls, sensors, and system integration, • Work hours may include early mornings, evenings, weekends, or night shifts depending on project requirements and concrete placement schedules., • Reporting & Documentation Requires you to:, • Prepare and submit daily inspection and test reports within required timeframe., • Utilize client or company reporting platforms as require, • Maintain organized and auditable inspection records Requirements • A minimum of 3 years of experience inspecting construction work in the city of NY, varied in Size and complexity. Projects may include commercial high-rise buildings, residential towers, transportation infrastructure, utilities, institutional facilities, and public-sector construction., • Familiarity with 101-06 and Chapter 17 of the NYC building code and the International Building Code., • Holds OSHA 10 or OSHA 30 Certification taken within the last 5 years., • Well versed in all aspects of construction and QA/QC responsibilities, • Familiarity with applicable Soils & Geotechnical Systems, • Training and/or knowledge in fall protection, scaffolding and ladders, & work-zone safety, • High School Diploma or Equivalent, • Physical Abilities applicable to construction projects in the City of New York and the ability to work outdoors in varying weather conditions and navigate active construction sites, including climbing ladders, scaffolding, and walking uneven surfaces., • Currently holds certification as in one or more of the following:, • AABC Test and Balance Technician Certification, • Bachelors Degree in Mechanical Engineering (accredited institution or equivalent), • ICC Certification as a Residential Mechanical Inspector, • ICC Certification as a Commercial Mechanical Inspector, • ICC Certification as a Commercial Building Inspector, • ICC Certification as a Residential Building Inspector, • NEBB Air Balancer Certification, • NYC Licensed Class A and B Oil Burner Equipment Installer, • NYC Licensed Master Plumber In this roll you will: • Implement the quality assurance measures on varying construction projects., • Review and submit all required documentation in accordance with project specifications, • Continually monitor work-in-progress, • Issue Non-Conformance Reports (NCR) where necessary., • Conduct inspections/tests as appropriate and as required, • Coordinate all work with the General Contractor or CM, • Notify the contractor if there are deviations to the Contract documents (including Contract Design Documents), • Document all RFIs; field coordination, issues and their resolution; deficiencies; corrective action; re-tests/inspections; deviations from the Contract Documents (including Design Drawings), • Take a proactive approach to quality workmanship and work-in-progress, • Ensure components meet project specifications, • Practice safety in accordance with applicable and site-specific standards Qualified professionals will also have: • Ability to communicate with colleagues and clients of all levels, • Experience working with Microsoft Office Suite, • Ability to read and understand construction drawings & specifications, • Reliable means of transportation & valid driver’s license, • Willingness to learn, • Works well with a team and individually, • Familiarity with construction industry codes, • Mathematical Knowledge - Using mathematics to solve problems., • Installation Oversight - Installing equipment, machines, to meet specifications., • Equipment Selection Oversight - Determining tools and equipment needed to do a job., • Ability to provide inspection reports in a timely manor, • Willingness to obtain additional certifications, • Works well with a team and individually MISTRAS Group, Inc. is committed to equal employment opportunity. Employment decisions including initial hiring and all matters involving the terms and conditions of employment will be made without regard to any protected class under applicable law. If hired, the employment relationship is “At-Will,” which means that employment can be terminated at any time, and for any reason, at the option of either the Company or the employee. Please direct questions about these policies to a MISTRAS Group, Inc. Human Resources representative. By submitting & signing , I hereby understand and agree to the terms and conditions of employment as outlined above. I certify that the responses and information provided in this application (including any other supporting documentation such as a cover letter, resume, or transcript) are true and accurate to the best of my knowledge. I understand that misrepresenting or omitting information requested is cause for dismissal at any time, without notice. I hereby give the Company permission to contact schools, previous employers (unless otherwise indicated), references, and others disclosed in my application. Note to Applicants: Smoking is prohibited in all indoor areas of the Company. Employees may use designated smoking areas (if established) in accordance with applicable state and local law. Rhode Island Applicants: The Company is subject to Chapters 29-38 of Title 28 of the General Laws of Rhode Island, and is therefore covered by the state’s workers’ compensation law. Initial (if applicable): Massachusetts Applicants: I understand that it is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Initial (if applicable): Maryland Applicants: I UNDERSTAND THAT UNDER MARYLAND LAW, AN EMPLOYER MAY NOT REQUIRE OR DEMAND, AS A CONDITION OF EMPLOYMENT, PROSPECTIVE EMPLOYMENT OR CONTINUED EMPLOYMENT, THAT ANY INDIVIDUAL SUBMIT TO OR TAKE A POLYGRAPH OR SIMILAR TEST. AN EMPLOYER WHO VIOLATES THIS LAW IS GUILTY OF A MISDEMEANOR AND SUBJECT TO A FINE NOT EXCEEDING $100. Mistras Group, Inc. is an Equal Opportunity Employer/Veterans/Disabled:

Job DescriptionDescription: KS Engineers, P.C. (KSE) is a mid-size engineering and construction management firm ranking in the ENR Top 500 for design and ENR Top 100 for construction management. We are headquartered in Newark, NJ, with regional offices in New York City and Newburgh, NY; Philadelphia and Pittsburgh, PA; Mount Laurel and Mount Arlington, NJ; and Rocky Hill, CT. The firm provides engineering, construction management, and land surveying services to both public and private sector clients. KSE offers a full range of employee benefits, including medical, dental and vision insurances, a 401(k) plan, paid time off, Flexible Spending Accounts (FSAs), long- and short-term disabilities, and term life insurance. KS Engineers, P.C. is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Position: Senior Inspector – NJ DCA Reports to: Department Manager and/or Project Manager General Qualities: • Qualified NJ DCA Certified Special Inspector to support inspection services on construction projects throughout New Jersey., • This role is responsible for ensuring that all work complies with applicable codes, standards, and project specifications, while maintaining the highest levels of safety and quality., • 3–9 years of relevant inspection experience Technical Duties & Responsibilities: • Perform field inspections in accordance with NJ DCA regulations, project specifications, and applicable building codes, • Inspect construction activities including structural steel, welding, concrete, masonry, and fireproofing, • Verify compliance with approved plans, submittals, and contract documents, • Identify and report non-conforming work and coordinate corrective actions, • Prepare and submit detailed daily inspection reports and documentation, • Coordinate with contractors, engineers, and project stakeholders to ensure quality and compliance, • Bachelor’s degree in civil, Structural, or Geotechnical Engineering (preferred), • Structural Welding, • Structural Steel & Bolting, • Reinforced Concrete, • Structural Masonry, • Spray-Applied Fireproofing, • NJ DCA Special Inspector – Concrete Placement, • NJ DCA Special Inspector – Prestressed Concrete, • NJ DCA Special Inspector – Soils, • Nuclear Gauge Safety Certification (U.S. Department of Transportation), • OSHA 30 Certification Physical Requirement: • Ability to pass a physical exam for full mobility, • Capable of lifting and/or moving up to 50lbs carrying, and transporting equipment, samples, and materials, • Comfortable navigating active construction sites, including ladders, scaffolding, and uneven terrain, • Willingness to work in varying site conditions and project environments KS Engineers, P.C. is an EOE/AA/VEV/Disabled Employer. KSE will not discriminate based on race, color, religion, creed, sex, national origin, marital status, age, disability, veteran status, citizenship status, or other status protected by law.

Job Description The MTA’s Second Avenue Subway project is a $7.7B expansion that will extend the Q Line from 96th Street into East Harlem, adding three new ADA-accessible stations at 106th, 116th, and 125th Streets. This long-awaited project will restore rapid transit access to a community underserved for decades, ease overcrowding on the Lexington Avenue line, and cut commute times—delivering a transformative impact for East Harlem residents and the city as a whole. This position will support the $2B design-build contract for Phase 2 that includes two tunnels that will allow the development of two new subway stations in New York. Led by Connect Plus Partners, a joint venture between FCC Construction and Halmar International, the project brings together extensive experience in large-scale infrastructure, complex tunneling, and urban transit construction. POSITION SUMMARY The Construction Quality Engineer (CQE) is responsible for implementation of the Quality Plan and oversight of all quality issues, ensuring that all aspects of the tunnel meet the required contractual, technical, quality and regulatory standards focusing on quality assurance and control throughout the construction process. He must ensure compliance with the Construction Quality Management Plan (CQMP), Inspection and Test Plans (ITPs), released-for-construction (RFC) drawings and applicable standards. This position must operate independently from production and supervision teams to maintain objectivity and integrity in quality program processes. RESPONSIBILITIES • Develop and implement quality assurance plans ensuring that all construction activities comply with project specifications and standards. This includes preparing method statements, inspection and test plans, and quality management policies and procedures., • Evaluate and document the quality of tunnel construction performed by the construction team, suppliers, and/or subcontractors, ensuring compliance with project requirements, RFC and As-Built drawings, and specifications., • Review and assess the quality of material used in construction, ensuring they meet the required specifications. This involves conducting inspections and tests on materials before they are used on-site., • Maintain comprehensive QA/QC documentation, including certificates, calibration records, test results and non-compliance reports. Ensure that all documentation is accurate and readily available for audits and inspections., • Verify that equipment used in the construction process is fit for purposes, properly calibrated, and maintained as required., • Identify and report non-compliant construction work or supplied products upon discovery and monitor the disposition of non-conformances., • Control the further processing, delivery, installation, or use of non-compliant construction work or supplied products until the issues are corrected, controlled, or removed., • Coordinate and notify all quality activities as indicated in the ITPs with Quality team, and other relevant parties, including contracting authorities, utilities, and governmental authorities., • Coordinate with subcontractors and the client and ensure ITP Witness/Hold points implementation as per contract and technical specification requirements., • Ensure that inspections and tests are performed according to approved ITPs, and that all quality records and documents are complete, accurate, and meet applicable requirements., • Review test packages and relevant documentation prior to conducting inspections and testing., • Works closely with construction teams, project managers and subcontractors to ensure quality standards are met. This includes providing feedback and guidance on quality-related issues and facilitating training in the quality management system., • Perform regular audits and inspections to monitor compliance with quality standards and identify areas for improvement. Generate reports on quality trends and non-conformances issues, proposing corrective actions as necessary., • Organize quality toolbox talks and lessons learned and maintain documentation of such. Prepare and maintain quality records related to their assigned portion of work., • Perform other duties as requested by the Construction Quality Manager and the project’s Quality Manager. EDUCATION AND QUALIFICATIONS • Degree in civil engineering, construction management, geotechnical engineering or similar industry., • A minimum of 15 years of experience in heavy civil projects, tunnel, transit, infrastructure or similar projects in scale and complexity., • Demonstrated relevant experience in full-time Quality Assurance and/or Quality Control management and with design-build contracts., • Current certification in Quality Management from the American Society for Quality (ASQ) or the American Society of Civil Engineers or equivalent experience or education is preferable., • Certification and/or training in quality control inspection and testing, particularly in transit construction projects., • Certification and/or documented training in construction quality assurance and quality control., • Familiarity with ISO 9001:2015 principles in quality systems and quality program implementation. WORK ENVIRONMENT • Work is primarily performed at active construction sites, including underground and surface environments., • Must be able to stand, walk, and climb for extended periods; navigate uneven ground, scaffolding, and ladders; and work around heavy equipment., • Exposure to noise, dust, vibration, confined spaces, and varying weather conditions is common., • Requires regular use of personal protective equipment (PPE), including hard hats, safety boots, high-visibility clothing, and eye/ear protection., • Ability to perform site inspections, monitor field activities, and respond quickly to safety or operational issues in physically demanding conditions., • Flexibility to work extended hours, nights, weekends, and rotating shifts as project demands require., • Occasional office-based work is required for reviewing documents, preparing reports, and coordinating with project management teams. FCC is dedicated to creating an inclusive workplace where diversity is valued and respected. As an Affirmative Action/Equal Opportunity Employer, we do not discriminate against any applicant for employment or employee because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, genetics, creed, veteran status, military status, or any other characteristic protected under Federal, State, or local laws. Reasonable accommodations will be provided to qualified individuals with disabilities in accordance with applicable law. If you need a reasonable accommodation during the interview process, please contact our HR team.

Job Description PVEDI is seeking a Staff Environmental Engineer who will work under the direction and supervision of senior staff. This position entails travel to job sites and working outside of the office setting conducting site and subsurface characterization for environmental and/or monitoring contractor's environmental activities during construction as well as some associated office-related work. This is a full-time position located in our New York City, NY office.The ideal candidate, after an appropriate duration of employment with the Firm, would be considered for advancement with additional responsibilities. Accountabilities : • Perform site reconnaissance to observe existing conditions, assess site access for subsurface explorations, and identify important site features., • Monitor subsurface exploration activities (e.g., test borings, geoprobes, and test pits) to collect soil, bedrock, groundwater, and other pertinent information for project design., • Conduct soil and groundwater sampling in accordance with applicable ASTM standards, company standard procedures, and other industry standard guidelines., • Conduct routine data collection, synthesis, and analysis using approved procedures appropriate for their discipline., • Compile, reduce, analyze, manage, and report field, instrumentation, geological, and/or environmental data using spreadsheets and other tools., • Conduct on-site monitoring/ engineering observation of contractor environmental and geotechnical related construction activities., • Use various environmental and geotechnical instrumentation and equipment during field work., • Perform historical site review and review applicable regulations, as appropriate., • Preparation of written reports, proposals, cost estimates, and other client deliverables, including Phase I and Phase II ESAs., • Assist the project management team throughout the project lifecycle, including cost estimating, scheduling, subcontracting, resource allocation, project planning, task delegation, and financial management. Minimum Skills and Requirements:, • B.S. degree in Environmental Engineering, Geology, or other related discipline. M.S. degree welcomed., • 2+ years of professional services consulting experience that includes execution of Phase I/Phase II environmental assessments, evaluation of environmental data, and presentation of technical solutions in a variety of written and oral formats., • Strong technical writing skills of regulatory submittals., • Has or will apply for initial professional certification in their core discipline, where applicable, such as EIT or FE, or FG or PG., • Excellent problem-solving skills;, • Experience with remedial design support including engineering drawing, drafting, and calculations for subsurface remediation., • Direct experience with NYSDEC Brownfield Cleanup Program and NYC Voluntary Cleanup program projects., • OSHA 40-hr. HAZWOPER and OSHA 30-hr. Construction Site Safety training required. PVEDI provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, PVEDI complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. PVEDI expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status.

Job DescriptionSalary: $63,000 - 91,500 Annual Base Salary DOE About mcfa: We are a professional services firm in the Architecture/Engineering/Construction (AEC) industry serving public and private sector clients in the Mid-Atlantic region. Our services include Strategy, Planning, Program Management & Construction Management. Our goal is to help every employee design a fulfilling career through alignment of their individual passions/skills with the vision of the organization. Our mission is "Inspiring People and Places through Project Leadership and Project Development." How you'll get to contribute: We are seeking a dedicated and skilled Construction Inspector for soil testing inspections and future road and bridge inspection projects. Our ideal candidate will be a highly motivated & qualified individual, with experience in quality assurance and quality control testing of materials related to soils and aggregates in the field. Candidate should have a solid understanding of civil engineering principles with a geotechnical focus, and a desire to work on multi-disciplinary projects. In this role, you will be responsible for overseeing and inspecting various highway and/or bridge construction projects across New Jersey, ensuring that all work is completed in accordance with established standards, specifications, and regulations. This role will also involve office engineer duties as outlined below. Work schedule varies according to job assignments and/or contractors' schedule, to include night work, weekends, and holidays. This job requires travel to various job sites. What you'll do: • Material quality services are completed through field operations in all the major material disciplines as directed (soils, aggregate, metals, structures, asphalt, concrete coatings, and paints)., • Observe field work to ensure workmanship and materials meet standards., • Inspect soil boring operations -- roadway borings, retaining wall borings, bridge borings., • Soil identification., • Prepare field boring logs in accordance with NJ Turnpike procedures., • Install wells and record monitoring well data., • Enter data for Test calculations., • Maintain project records., • Ability to document daily inspections and various other reports., • Provide daily inspections of highway and/or bridge construction projects and inspect related work materials to ensure compliance with design specifications, safety standards, and state regulations., • Prepare detailed reports on inspection findings, including recommendations for corrective actions when necessary., • Monitor and document the progress of construction activities, identifying any deviations from the planned schedule or specifications., • Communicate with prime and other subcontractors., • Coordinate with project team members, engineers, and contractors to address and resolve any issues that arise during construction., • Ensure that the contracted drilling firm carries out its work in accordance with contract specification., • Review and interpret construction plans, blueprints, and specifications to ensure accurate implementation on-site., • Assist in the development and implementation of quality control procedures., • Attend meetings and conferences as needed., • Travel to various project sites. Who you are: • Bachelor's degree in Civil Engineering, Construction Engineering, Geological Engineering, Structural Engineering, or related field., • Familiar with ASTM and AASHTO standards for testing and inspections., • Strong knowledge of construction methods, materials, and legal regulations., • Excellent communication and interpersonal skills., • Ability to read and interpret engineering drawings and specifications., • Proficient in Microsoft Office and project/construction management software., • Valid driver's license, consistent means of transportation to/from project sites, and willingness to travel to various project sites within New Jersey., • 2+ years of experience in construction inspection, with a focus on transportation infrastructure projects and/or soil testing., • Familiarity with Bentley gINT software., • Certifications/Trainings, • OSHA 30, • American Concrete Institute (ACI) - Soil Inspector, Concrete, • International Code Council (ICC) - Soil Inspector, Masonry steel, Bolting, Welding, Post installed anchors, • TR1 Special Inspections, • New Jersey DCA Certified, • NICET I certification in Highway Construction Inspection or Construction Materials Testing Soils., • Professional Engineer (P.E.) license., • NJSAT and TCC/TCP Certifications. What's in it for you: Annual Paid Time Off: • Sick Leave: 5 Days (40 Hours), • Vacation: 15 Days (120 Hours), • Following your first full quarter worked, you will qualify for a profit-share bonus that is distributed at the end of each quarter if company targets are hit., • Incoming Growth Units: 10, • Eligible to participate in mcfa's family medical, dental and vision coverage; plan access begins on the first day of employment., • mcfa contributes up to 75% shared cost, not to exceed $700 per month., • Company paid life insurance plan (up to $100,000 per employee)., • You are eligible to participate in Company retirement plan (401k) on first day of employment with mcfa. mcfa Core Values (LEADS): • Love (each other, mission, work), • Entrepreneurial (spirit of innovation), • Accountability (to ourselves, our clients, each other), • Delight (customers and teammates), • Stretch (individual and collective growth mindset) mcfa is an Equal Employment Opportunity Employer. mcfa does not discriminate against any applicant or employee with regard to hiring, tenure of employment, promotion, transfer, selection for training, or any other terms or conditions of employment because of race, color, religion, sex, age, sexual orientation, disability, gender identity or national origin, status as a Vietnam-era or special disabled veteran in accordance with applicable federal law, or on any ground protected by state or local law in each area in which mcfa maintains facilities. #ZR Company DescriptionCompany Overview: We are an entrepreneurial firm focused on strategic planning, project development, program management, and construction management. We are a dedicated team of professionals, committed to delivering innovative solutions to our clients by inspiring people and places. We believe that our approach to grow, empower, and deploy Project Leadership is our differentiator in the client and talent marketplace. We have been steadily growing and establishing ourselves as an entrepreneurial leader in the industry. As we continue to expand, we are seeking a highly capable and experienced Director of Construction Management to join our senior leadership team and play a crucial role in directing our construction project and program success. Our core values drive how we hire, fire, train, incentivize and reward. They steer our company’s growth and serve as the common ground we seek in professional relationships with our clients and team members. mcfa core values: Extreme Ownership, Intentional Creativity, Fun, Teamwork, White-Glove Customer Experience, Growth-focused, Entrepreneurial Spirit.Company Overview: We are an entrepreneurial firm focused on strategic planning, project development, program management, and construction management. We are a dedicated team of professionals, committed to delivering innovative solutions to our clients by inspiring people and places. We believe that our approach to grow, empower, and deploy Project Leadership is our differentiator in the client and talent marketplace. We have been steadily growing and establishing ourselves as an entrepreneurial leader in the industry. As we continue to expand, we are seeking a highly capable and experienced Director of Construction Management to join our senior leadership team and play a crucial role in directing our construction project and program success. \r\n\r\nOur core values drive how we hire, fire, train, incentivize and reward. They steer our company’s growth and serve as the common ground we seek in professional relationships with our clients and team members. mcfa core values: Extreme Ownership, Intentional Creativity, Fun, Teamwork, White-Glove Customer Experience, Growth-focused, Entrepreneurial Spirit.

Job DescriptionMatrix New World Engineering, a part of True Environmental and its partner firms, have united their strengths to establish the nation's premier environmental and engineering services consulting firm. This powerhouse organization offers an extensive range of services aimed at revolutionizing the built environment and preserving the natural one. Its diverse expertise encompasses environmental remediation, urban planning, engineering iconic coastal and marine structures, developing sustainable energy sources, and pioneering resource extraction methods. Explore further at and True-Environmental.com to discover the full scope of our capabilities. Matrix New World is currently seeking a Marine and Coastal Engineer for the New York/New Jersey metro area. Matrix is a growing full-service environmental services and engineering firm offering unmatched expertise in delivering some of the nation's most exciting and complex infrastructure, resiliency, and sustainability projects, including such projects as FiDi Coastal Resiliency, Blue Highways, and Bush Terminal Pier 6 Redevelopment. As an Associate Engineer, you will be responsible for performing the inspection, design, and/or analysis of marine and coastal structures. You will perform engineering calculations, prepare contract drawings, specifications, and permitting applications. Base Annual Salary Range: $70,000 - $90,000 What you'll do: • Perform inspection, design, rehabilitation, permitting, and/or construction oversight for bulkheads, piers, marine terminals, fendering and mooring systems, ferry landings, living shorelines, stone revetments, and other port-related infrastructure., • Prepare engineering deliverables including contract drawings, specifications, 3D models, cost estimates, permit applications, inspection reports, calculation packages, and operations manuals., • Perform structural, coastal, and geotechnical engineering design of concrete, steel, timber and masonry structures using applicable codes and standards under the supervision of a professional engineer., • Perform above water and underwater survey/imaging/mapping of berths and marine structures., • Perform above water inspection of marine structures.Minimum Qualifications:, • BS in civil, structural, geotechnical, or coastal engineering, • Excellent written and verbal communication skills, • 0 to 2 years of structural, coastal or geotechnical engineering experience.Preferred Qualifications, • MS in civil, structural, geotechnical, or coastal engineeringAll qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

Job Description Currently we are looking for Concrete Inspectors for immediate Building & Infrastructure Projects Location: Greater New York City Metropolitan Area (Project Location Varies) Status: Part Time as Needed Duration: Extended Client: Varies Compensation: $25hr - $35/hr Based on Certification & Experience Concrete Inspector Role Overview The Concrete Inspector is responsible for providing independent inspection and testing services for Building & Infrastructure projects throughout the Greater New York City Metropolitan Area. This role supports both Quality Control (QC) and Quality Assurance (QA) programs in accordance with NYC Building Code Chapter 17, 1 RCNY §101-06, and the International Building Code (IBC), as applicable to each project. Inspectors will verify that concrete materials, placement, reinforcement, curing, and associated construction activities conform to approved contract documents, design drawings, specifications, and applicable codes and standards. The position requires a strong understanding of concrete construction means and methods, inspection protocols, and regulatory requirements unique to New York City. This role involves maintaining an on-site presence during active construction operations, coordinating closely with contractors, construction managers, special inspectors, and client representatives to ensure all required inspections and tests are performed at the appropriate stages of work. Inspectors are expected to proactively identify non-conforming conditions, clearly document findings, and communicate issues in real time to minimize rework, delays, and compliance risks. The Concrete Inspector will be responsible for witnessing and documenting all required testing activities, preparing accurate daily inspection and test reports, maintaining deficiency and Non-Conformance Report (NCR) logs, and verifying corrective actions and re-inspections. This position plays a critical role in ensuring structural integrity, life safety compliance, and overall project quality. • Work responsibilities may include but are not limited to the following:, • Inspection of reinforcing steel placement, embedments, anchors, and formwork, • Observation of concrete placement, consolidation, finishing, and curing, • Sampling and testing of fresh concrete (slump, air, temperature, cylinders), • Verification of mix designs, batch tickets, and delivery times, • Observation of hot and cold weather concreting procedures, • Work hours may include early mornings, evenings, weekends, or night shifts depending on project requirements and concrete placement schedules., • Reporting & Documentation Requires you to:, • Prepare and submit daily inspection and test reports within required timeframe., • Utilize client or company reporting platforms as require, • Maintain organized and auditable inspection records Requirements • A minimum of 3 years of experience inspecting construction work in the city of NY, varied in Size and complexity. Projects may include commercial high-rise buildings, residential towers, transportation infrastructure, utilities, institutional facilities, and public-sector construction., • Familiarity with 101-06 and Chapter 17 of the NYC building code and the International Building Code., • Holds OSHA 10 or OSHA 30 Certification taken within the last 5 years., • Well versed in all aspects of construction and QA/QC responsibilities, • Familiarity with applicable Soils & Geotechnical Systems, • Training and/or knowledge in fall protection, scaffolding and ladders, & work-zone safety, • High School Diploma or Equivalent, • Physical Abilities applicable to construction projects in the City of New York and the ability to work outdoors in varying weather conditions and navigate active construction sites, including climbing ladders, scaffolding, and walking uneven surfaces., • Currently holds certification as in one or more of the following:, • ACI Level 1 Concrete Testing Technician, • ACI Certification as Concrete Construction Special Inspector (ACICCSI), • ACI Certification as an Associate Concrete Construction Special Inspector (ACI-ACCSI), • ICC Certification as Concrete Special Inspector (ICCCSI), • ICC Certification as Prestressed Concrete Special Inspector In this roll you will: • Implement the quality assurance measures on varying construction projects., • Review and submit all required documentation in accordance with project specifications, • Continually monitor work-in-progress, • Issue Non-Conformance Reports (NCR) where necessary., • Conduct inspections/tests as appropriate and as required, • Coordinate all work with the General Contractor or CM, • Notify the contractor if there are deviations to the Contract documents (including Contract Design Documents), • Document all RFIs; field coordination, issues and their resolution; deficiencies; corrective action; re-tests/inspections; deviations from the Contract Documents (including Design Drawings), • Take a proactive approach to quality workmanship and work-in-progress, • Ensure components meet project specifications, • Practice safety in accordance with applicable and site-specific standards Qualified professionals will also have: • Ability to communicate with colleagues and clients of all levels, • Experience working with Microsoft Office Suite, • Ability to read and understand construction drawings & specifications, • Reliable means of transportation & valid driver’s license, • Willingness to learn, • Works well with a team and individually, • Familiarity with construction industry codes, • Mathematical Knowledge - Using mathematics to solve problems., • Installation Oversight - Installing equipment, machines, to meet specifications., • Equipment Selection Oversight - Determining tools and equipment needed to do a job., • Ability to provide inspection reports in a timely manor, • Willingness to obtain additional certifications, • Works well with a team and individually MISTRAS Group, Inc. is committed to equal employment opportunity. Employment decisions including initial hiring and all matters involving the terms and conditions of employment will be made without regard to any protected class under applicable law. If hired, the employment relationship is “At-Will,” which means that employment can be terminated at any time, and for any reason, at the option of either the Company or the employee. Please direct questions about these policies to a MISTRAS Group, Inc. Human Resources representative. By submitting & signing , I hereby understand and agree to the terms and conditions of employment as outlined above. I certify that the responses and information provided in this application (including any other supporting documentation such as a cover letter, resume, or transcript) are true and accurate to the best of my knowledge. I understand that misrepresenting or omitting information requested is cause for dismissal at any time, without notice. I hereby give the Company permission to contact schools, previous employers (unless otherwise indicated), references, and others disclosed in my application. Note to Applicants: Smoking is prohibited in all indoor areas of the Company. Employees may use designated smoking areas (if established) in accordance with applicable state and local law. Rhode Island Applicants: The Company is subject to Chapters 29-38 of Title 28 of the General Laws of Rhode Island, and is therefore covered by the state’s workers’ compensation law. Initial (if applicable): Massachusetts Applicants: I understand that it is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Initial (if applicable): Maryland Applicants: I UNDERSTAND THAT UNDER MARYLAND LAW, AN EMPLOYER MAY NOT REQUIRE OR DEMAND, AS A CONDITION OF EMPLOYMENT, PROSPECTIVE EMPLOYMENT OR CONTINUED EMPLOYMENT, THAT ANY INDIVIDUAL SUBMIT TO OR TAKE A POLYGRAPH OR SIMILAR TEST. AN EMPLOYER WHO VIOLATES THIS LAW IS GUILTY OF A MISDEMEANOR AND SUBJECT TO A FINE NOT EXCEEDING $100. Mistras Group, Inc. is an Equal Opportunity Employer/Veterans/Disabled:

Job Description Currently we are looking for Professional Engineer Field Inspectors for immediate Building & Infrastructure Projects Location: Greater New York City Metropolitan Area (Project Location Varies) Status: Part Time as Needed Duration: Extended Client: Varies Compensation: $55hr - $70/hr Based on Certification & Experience Professional Engineer Field Inspector Role Overview The Professional Engineer (PE) Field Inspector provides advanced inspection, verification, and technical oversight services for Building & Infrastructure projects throughout the Greater New York City Metropolitan Area. This role supports both Quality Control (QC) and Quality Assurance (QA) programs in accordance with 1 RCNY §101-06, Chapter 17 of the NYC Building Code, and the International Building Code (IBC), as applicable to each project. This position is responsible for verifying that construction activities, materials, installations, and systems conform to approved design documents, specifications, code requirements, and project standards. The PE Field Inspector serves as a senior technical presence on site, providing engineering judgment where required and supporting compliance-driven decision-making on complex or high-risk work elements. The role requires maintaining an active on-site presence during construction operations, witnessing required inspections and testing, and coordinating closely with contractors, construction managers, special inspectors, laboratories, and client representatives. The PE Field Inspector is expected to proactively identify deviations from contract documents, document non-conforming work, issue Non-Conformance Reports (NCRs) as necessary, and verify the implementation and effectiveness of corrective actions. This position plays a critical role in ensuring structural integrity, life-safety compliance, constructability alignment, and regulatory adherence, particularly on projects involving complex systems, specialty construction, or heightened oversight requirements. • Work responsibilities may include but are not limited to the following:, • Review and verification of complex or delegated design elements, • Oversight of specialty inspections and testing programs, • Engineering evaluation of non-conforming work and proposed corrective actions, • Field verification of structural, civil, MEP, and specialty systems, • Coordination with design engineers for field clarifications and RFIs, • Work hours may include early mornings, evenings, weekends, or night shifts depending on project requirements and concrete placement schedules., • Reporting & Documentation Requires you to:, • Prepare and submit daily inspection and test reports within required timeframe., • Utilize client or company reporting platforms as require, • Maintain organized and auditable inspection records Requirements • A minimum of 3 years of experience inspecting construction work in the city of NY, varied in Size and complexity. Projects may include commercial high-rise buildings, residential towers, transportation infrastructure, utilities, institutional facilities, and public-sector construction., • Familiarity with 101-06 and Chapter 17 of the NYC building code and the International Building Code., • Holds OSHA 10 or OSHA 30 Certification taken within the last 5 years., • Well versed in all aspects of construction and QA/QC responsibilities, • Familiarity with applicable Soils & Geotechnical Systems, • Training and/or knowledge in fall protection, scaffolding and ladders, & work-zone safety, • High School Diploma or Equivalent, • Physical Abilities applicable to construction projects in the City of New York and the ability to work outdoors in varying weather conditions and navigate active construction sites, including climbing ladders, scaffolding, and walking uneven surfaces., • Currently holds certification as in one of the following: § Structural § Civil § Marine § Mechanical § Electrical § Fire Protection In this roll you will: • Implement the quality assurance measures on varying construction projects., • Review and submit all required documentation in accordance with project specifications, • Continually monitor work-in-progress, • Issue Non-Conformance Reports (NCR) where necessary., • Conduct inspections/tests as appropriate and as required, • Coordinate all work with the General Contractor or CM, • Notify the contractor if there are deviations to the Contract documents (including Contract Design Documents), • Document all RFIs; field coordination, issues and their resolution; deficiencies; corrective action; re-tests/inspections; deviations from the Contract Documents (including Design Drawings), • Take a proactive approach to quality workmanship and work-in-progress, • Ensure components meet project specifications, • Practice safety in accordance with applicable and site-specific standards Qualified professionals will also have: • Ability to communicate with colleagues and clients of all levels, • Experience working with Microsoft Office Suite, • Ability to read and understand construction drawings & specifications, • Reliable means of transportation & valid driver’s license, • Willingness to learn, • Works well with a team and individually, • Familiarity with construction industry codes, • Mathematical Knowledge - Using mathematics to solve problems., • Installation Oversight - Installing equipment, machines, to meet specifications., • Equipment Selection Oversight - Determining tools and equipment needed to do a job., • Ability to provide inspection reports in a timely manor, • Willingness to obtain additional certifications, • Works well with a team and individually MISTRAS Group, Inc. is committed to equal employment opportunity. Employment decisions including initial hiring and all matters involving the terms and conditions of employment will be made without regard to any protected class under applicable law. If hired, the employment relationship is “At-Will,” which means that employment can be terminated at any time, and for any reason, at the option of either the Company or the employee. Please direct questions about these policies to a MISTRAS Group, Inc. Human Resources representative. By submitting & signing , I hereby understand and agree to the terms and conditions of employment as outlined above. I certify that the responses and information provided in this application (including any other supporting documentation such as a cover letter, resume, or transcript) are true and accurate to the best of my knowledge. I understand that misrepresenting or omitting information requested is cause for dismissal at any time, without notice. I hereby give the Company permission to contact schools, previous employers (unless otherwise indicated), references, and others disclosed in my application. Note to Applicants: Smoking is prohibited in all indoor areas of the Company. Employees may use designated smoking areas (if established) in accordance with applicable state and local law. Rhode Island Applicants: The Company is subject to Chapters 29-38 of Title 28 of the General Laws of Rhode Island, and is therefore covered by the state’s workers’ compensation law. Initial (if applicable): Massachusetts Applicants: I understand that it is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Initial (if applicable): Maryland Applicants: I UNDERSTAND THAT UNDER MARYLAND LAW, AN EMPLOYER MAY NOT REQUIRE OR DEMAND, AS A CONDITION OF EMPLOYMENT, PROSPECTIVE EMPLOYMENT OR CONTINUED EMPLOYMENT, THAT ANY INDIVIDUAL SUBMIT TO OR TAKE A POLYGRAPH OR SIMILAR TEST. AN EMPLOYER WHO VIOLATES THIS LAW IS GUILTY OF A MISDEMEANOR AND SUBJECT TO A FINE NOT EXCEEDING $100. Mistras Group, Inc. is an Equal Opportunity Employer/Veterans/Disabled:

Job DescriptionSalary: $45-$60/hour Job Title: Civil Engineer Position Summary Pay Rate - $45-$60/hour Adidev is seeking a motivated and detail-oriented Civil Engineer to plan, design, and oversee a wide range of infrastructure and civil works projects including transportation systems, bridges, buildings, site development, utilities, and water/wastewater facilities. This role blends office-based design and analysis with hands-on field oversight, offering the opportunity to see projects through from concept to completion while ensuring quality, safety, sustainability, and regulatory compliance. You will collaborate with multidisciplinary engineering teams, public agencies, and contractors to deliver reliable infrastructure that serves communities and supports long-term growth. About Adidev Adidev Technologies is an engineering and professional services firm supporting infrastructure, construction, public works, and information technology projects across the United States. We hire and support both Civil Engineering and IT professionals, including Mobile Developers and Machine Learning Engineers, and partner with municipalities, transportation authorities, utilities, and leading private-sector organizations to deliver high-quality, practical solutions. Our teams have supported projects and initiatives for public agencies and industry leaders, including state Departments of Transportation (DOTs), municipal public works agencies, and technology-driven organizations such as Delta, Google, Apple, Spotify, US Bank, and FedEx, as well as major engineering and construction firms. Adidev delivers innovative, data-driven solutions that modernize infrastructure, improve efficiency, and strengthen the communities our clients serve. We focus on practical, field-tested solutions and pride ourselves on collaboration, technical excellence, and delivering projects that make a measurable impact. Key Responsibilities -Review survey reports, maps, plans, and technical data to support infrastructure design -Perform engineering calculations (structural, geotechnical, hydraulic, and transportation) -Prepare drawings, plans, and specifications using CAD/BIM and engineering tools -Develop cost estimates, schedules, and project budgets -Obtain permits and ensure compliance with federal, state, and local regulations -Conduct site visits to monitor construction progress and ensure adherence to design specifications -Coordinate with contractors, inspectors, agencies, and stakeholders -Identify risks, resolve field issues, and recommend engineering improvements -Maintain documentation including reports, design changes, and inspections -Support projects from concept development through construction and closeout -Pursue and/or maintain professional licensure (PE preferred) Qualifications / Skills -Bachelors degree in Civil Engineering or related field (Masters preferred for some roles) -Strong foundation in one or more disciplines: structural, transportation, geotechnical, water resources, or environmental engineering -Proficiency with AutoCAD, Civil 3D, BIM, or similar engineering software -Understanding of codes, standards, permitting processes, and regulatory requirements -Strong analytical and problem-solving abilities -Effective written and verbal communication skills -Comfortable working both in office and field environments -Project coordination, budgeting, and scheduling experience -Interest in sustainable, resilient, and community-focused infrastructure design -EIT or PE licensure (preferred or in progress) Working Conditions -Combination of office and field work -Site visits and outdoor work required -Full-time schedule with occasional extended hours based on project needs -Travel or relocation may be required depending on assignments -Perks and Benefits -Competitive salary based on experience and market value -Paid relocation assistance -Flexible and hybrid work options when project schedules allow -Professional development and continuing education support -Licensing and certification reimbursement -Regular performance and salary reviews -Opportunity to work on meaningful infrastructure projects that directly impact communities Ready to Build the Future? If youre passionate about designing and delivering infrastructure that improves everyday life, wed love to hear from you. Submit your resume along with examples of projects youre proud of. Join Adidev and help shape stronger, smarter communities through engineering excellence.

Job Description At Brightcore Energy, we specialize in turn-key solutions that simplify the clean energy journey for large commercial and industrial clients. Whether it's cutting-edge geothermal systems, solar, energy storage, or smart building technologies, we bring expertise, innovation, and a seamless approach to every phase of a project – from planning and design to implementation and ongoing support – thereby streamlining project timelines, reducing costs, and eliminating scope gaps. Summary/Primary Role: This role is responsible for preparing accurate and competitive cost estimates for geothermal and mechanical construction projects. This role analyzes drawings, specifications, and subsurface data to develop detailed pricing for ground source heat pump systems, piping, drilling coordination, and associated mechanical scopes. The estimator works closely with preconstruction, engineering, and operations teams to support successful project pursuit and execution. Principal Duties & Responsibilities: (Management may amend or assign duties and responsibilities to this job at any time) • Prepare detailed cost estimates for mechanical systems, including labor, materials, equipment, and subcontracted work., • Analyze blueprints, specifications, and scopes of work to develop accurate cost estimates for labor, materials, equipment, and subcontractors related to mechanical systems, including HVAC, plumbing, and piping, in support of geothermal and energy infrastructure projects., • Coordinate pricing and scope alignment with mechanical, electrical, and plumbing (MEP) contractors, specialty vendors, and suppliers., • Participate in pre-bid meetings, site walks, and subcontractor audits as needed. Estimated travel requirement: up to 25%., • Ideally has strong HVAC, plumbing, or piping backgrounds with the ability to provide support to onboard into geothermal-related work., • Thorough knowledge of piping, plumbing and mechanical system operations., • Estimating, budget, cost control, scheduling, and management of multiple bids., • Solid understanding of wide variety of HVAC equipment and materials., • Review construction drawings, specifications, geotechnical reports, and RFP/RFQ documents., • Perform quantity takeoffs for piping, heat pumps, mechanical equipment, and related components., • Analyze historical cost data and market conditions to ensure competitive pricing., • Participate in pre-bid meetings, site visits, and scope reviews., • Identify risks, value engineering opportunities, and constructability considerations., • Collaborate with project managers and engineers to ensure smooth handoff from estimate to execution., • Maintain estimating databases, templates, and cost libraries., • Assist with post-bid reviews and cost variance analysis., • Bachelor's degree in Mechanical Engineering, Construction Management, or related field (or equivalent experience)., • 3–7+ years of mechanical estimating experience, preferably in geothermal or HVAC., • Strong understanding of mechanical systems, piping, and HVAC equipment., • Ability to read and interpret construction drawings and specifications., • Proficiency in estimating software, CAD drawings and Microsoft Excel., • Strong analytical, organizational, and communication skills. This position does not have supervisory responsibility. Expected Hours of Work: An Employee is expected to work a minimum of forty (40) hours per week. Non-exempt employees are eligible for overtime pay in accordance with applicable wage and hour laws, while exempt employees may be required to work additional hours as necessary to fulfill their job responsibilities. Overtime requirements will be determined based on the operational needs of the organization. The salary range and/or hourly rate listed is a good faith determination of potential base compensation that may be offered to a successful applicant for this position at the time of this job advertisement and may be modified in the future. When determining an employee's base salary and/or rate, several factors may be considered as applicable (e.g., location, specialty, years of relevant experience, education, credentials, and internal equity). Brightcore also offers a comprehensive set of benefits to compliment the base salary. The base annual salary range for this position is $100,000-$130,000 and is eligible for an annual performance-based bonus. Travel Requirements: • Travel required up to 75% to work/project sites in the greater Northeast Region (but not limited to) of the United States., • Work site setting. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Brightcore Energy is committed to a safe workplace free of drugs and alcohol. All Brightcore Energy positions require a pre-employment background check that includes prior employment verifications, a criminal history check, and a pre-employment drug screen. In accordance with DOT regulations (49 CFR § 40.25), Brightcore Energy is required to obtain prior drug and alcohol testing records for applicants/employees intending to perform safety-sensitive duties for covered Department of Transportation positions. If an applicant/employee refuses to provide written consent for Brightcore Energy to obtain these records, the individual will not be permitted to perform safety-sensitive functions. Office/Remote/Field Work: We offer a variety of structured work arrangements, including remote, hybrid, and field-based assignments, aligned with organizational needs and role-specific requirements. Work arrangements are role-dependent, with guidelines established based on position requirements and business needs. This policy is subject to change at Brightcore's discretion. Brightcore Health Benefits Overview: Brightcore offers a full slate of medical, dental, and vision benefits including options to enroll in a Flexible Spending Account (FSA) and a Health Savings Account (HSA). 401k Plan: Brightcore currently offers both traditional and Roth 401k plans with a dollar-for-dollar match of up to 3% of contributions and $0.50 on the next 2% for a total potential match of 4% annually. Other Benefits & Perks: • PTO, • Financial Wellness Benefits, • Benefit Concierge Program through Health Advocate, • EAP - Employee Assistance Program, • Disability, Life, & AD&D Benefits Brightcore Energy is an Equal Opportunity Employer, providing equal employment and advancement opportunities to all individuals. We recruit, hire and promote into all job levels the most qualified applicants without regard to race, color, creed, national origin, religion, sex (including pregnancy), parental status, age, disability, genetic information, citizenship status, veteran status, gender identity or expression, transgender status, sexual orientation, marital, family or partnership status, political affiliation or activities, military service, domestic violence victim status, sexual or reproductive health decisions, caregiver status, traits historically associated with race, including but not limited to hair texture and protective hairstyles or any other status protected under applicable federal, state and local laws. Brightcore Energy is committed to providing equal employment opportunities to all aspects of employment, including job assignment and compensation. We respect the laws enforced by the EEOC and are dedicated to going above and beyond in fostering diversity across our company. This job description provides a general overview of the expectations and basic duties of the job and is not a comprehensive list of all duties and responsibilities. Brightcore Energy will assign additional duties and tasks that it deems necessary to meet the requirements of the position. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description About us! Vanderweil Engineers is a top-ranked national engineering firm specializing in Power, MEP/FP and technology systems for a wide range of market sectors. In our 75th year in operation with a staff of 500+ located across nine offices, we are proud to be one of the leading independently owned engineering firms in the country. If you are looking for an opportunity to break away from your silo to grow your career while working on high profile projects, we are looking for you. Take a leadership role and help shape the future of our growing Power Delivery Group. Join us to do the best work of your career as a Lead Substation Structural Engineer with our growing Power Group team at our headquarters in Boston, MA (Seaport District) or New York, NY, or Philadelphia, PA (hybrid schedule). What You will Achieve: With our continued growth in the Transmission & Distribution sector, we are seeking a Lead Substation Structural Engineer. Work on critical infrastructure projects and contribute to the structural integrity of high-voltage substations nationwide. Our Power Group provides full-service engineering and design solutions for utility, institutional, and commercial clients across the U.S., with a strong focus on reliability, sustainability, and innovation. We offer clear paths for professional growth, leadership development, and the opportunity to directly impact our success as we expand into new markets and technologies. Some of your responsibilities include the following: • Lead the structural engineering and design of both transmission and distribution substations, including new builds, expansions, and retrofits., • Perform and review structural analysis and design using software such as RISA-3D, STAAD.Pro, L-Pile, RAM Structural System, CSI SAFE, or MathCAD., • Develop and oversee the production of structural construction documents, including detailed specifications, plans, and calculations for steel, concrete, and foundation systems., • Evaluate existing structures for loading capacity, retrofit needs, and compliance with current codes., • Coordinate with geotechnical teams for interpretation and application of soil data into foundation design., • Support and lead field investigations, constructability reviews, and site assessments., • Review and approve delegated design work from subconsultants or junior engineers, ensuring compliance with engineering best practices and project requirements., • Mentor and provide technical leadership to junior engineers, designers, and drafters. Essential Skills & Requirements: • 8+ years of structural engineering experience,, • 5+ years in substation structural design for transmission and/or distribution facilities., • Bachelor’s degree in Civil Engineering, • PE license, • Designing and analyzing steel structures, equipment foundations, site civil systems for substations., • Proficient with structural software like STAAD.Pro, RISA-3D, RAM Structural System, L-Pile, CSI SAFE, MFAD, or MathCAD. Our Flexible & Hybrid Work Culture: We know that work/life integration is important to our employees. Our hybrid work style (up to 2 days remote per week) allows team members to have flexibility while building their skills through in-person exposure to industry experts. Our wellness programs prioritize our team members’ physical and behavioral health. We are an equal opportunity employer committed to diversity in the workplace. This position has a salary range of $110,000 to $160,000 and is commensurate on years of experience, licensure, skill sets, location, and education. Reach out to us to discuss total rewards and compensation package.

Job Description Build Your Career at FCC Construcción With 125 years of experience, the FCC Group's Infrastructure Division is present in 25 countries, and its activities cover all areas of engineering and construction. It is a leader in the execution of transport infrastructure, as well as in residential and non-residential construction. FCC Construcción is currently the fourth-largest construction company in Spain in terms of contract volume and ranks among the top 30 in the world, according to the international magazine ENR (Engineering News-Record). Project Opportunity We are looking for a Field Engineer to join our FCC Team assigned to the MTA’s Second Avenue Subway Project. This position is based in New York, NY, and requires daily presence in the office and/or on construction sites. The MTA’s Second Avenue Subway project is a $7.7B expansion that will extend the Q Line from 96th Street into East Harlem, adding three new ADA-accessible stations at 106th, 116th, and 125th Streets. This long-awaited project will restore rapid transit access to a community underserved for decades, ease overcrowding on the Lexington Avenue line, and cut commute times—delivering a transformative impact for East Harlem residents and the city as a whole. This position will support the $2 billion design-build contract for Phase 2, which includes two tunnels that will enable the development of two new subway stations in New York. Led by Connect Plus Partners, a joint venture between FCC Construction and Halmar International, the project brings together extensive experience in large-scale infrastructure, complex tunneling, and urban transit construction. Position Summary Reports to: Tunnel Superintendent or Cavern Superintendent The Field Engineer supports daily underground construction operations, working directly alongside superintendents and foremen in the field. This role is responsible for coordinating technical activities, tracking construction progress, and ensuring compliance with project specifications, safety standards, and quality requirements. Serving as a key link between design, planning, and execution, the field engineer contributes to the effective delivery of underground works. This is a field-based position that supports the full lifecycle of construction, with engineers assigned by activity zone (tunnel or cavern) across multiple work sites. The Field Engineer’s key responsibilities are: • Support the superintendent in day-to-day construction activities, providing engineering input to ensure design intent and construction means are aligned., • Assist with pre-construction planning, including constructability reviews, site logistics, and early procurement coordination., • Review and interpret construction drawings, specifications, and submittals for use in the field., • Coordinate and track construction progress using activity-level schedules and progress measurement systems., • Participate in and document responses to RFIs, field changes, and non-conformance issues., • Provide support in managing subcontractor interfaces, daily production tracking, and verification of completed quantities., • Monitor geotechnical instrumentation data (settlement points, extensometers, piezometers, etc.) and flag deviations to engineering or geotechnical leads., • Ensure compliance with safety plans, quality assurance protocols, and environmental standards through field inspections and checklists., • Assist with the preparation and maintenance of construction documentation, including as-builts, redlines, test reports, and shift logs., • Coordinate and input field data for schedule updates, productivity tracking, and earned value analysis., • Support the preparation of daily, weekly, and monthly progress reports., • Interface with survey teams, field engineers from other disciplines, and quality control personnel to align work., • Participate in shift turnover meetings and handover documentation for 24/7 operations., • Verify material deliveries and support materials tracking against planned work., • Support installation tracking and compliance for critical systems (e.g., waterproofing, utilities, ventilation, fireproofing)., • Bachelor’s degree in Civil, Mining, Geotechnical Engineering, or related discipline., • 8-10 years of field construction experience and a minimum of 5 years in underground construction., • Ability to read and interpret plans., • Proficiency with geotechnical monitoring systems and reporting tools., • Experience using construction management software (e.g., Procore, e-Builder, or similar)., • Proficiency in Microsoft Office Suite (Excel, Word, Outlook); familiarity with scheduling tools like Primavera P6 is a plus., • Familiarity with geotechnical monitoring systems and instrumentation data review., • Ability to work in confined underground environments with exposure to variable ground conditions and limited access., • Strong written and verbal communication skills; ability to document and report on field conditions clearly., • Demonstrated problem-solving skills and capacity to adapt to real-time construction challenges., • Must be detail-oriented and organized with the ability to prioritize tasks in a dynamic field environment., • Work is primarily at active underground construction sites with exposure to confined spaces, dust, noise, vibration, and variable ground conditions., • Must be able to stand, walk, and climb for extended periods; navigate uneven ground, scaffolding, and ladders; and work around heavy tunneling equipment., • Requires regular use of personal protective equipment (PPE), including hard hats, safety boots, high-visibility clothing, and eye/ear protection as necessary., • Ability to perform site inspections, monitor field activities, and respond quickly to safety or operational issues in physically demanding conditions., • Flexibility to work extended hours, nights, weekends, and rotating shifts as project demands require. FCC is dedicated to creating an inclusive workplace where diversity is valued and respected. As an Affirmative Action/Equal Opportunity Employer, we do not discriminate against any applicant for employment or employee because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, genetics, creed, veteran status, military status, or any other characteristic protected under Federal, State, or local laws. Reasonable accommodations will be provided to qualified individuals with disabilities in accordance with applicable law. If you need a reasonable accommodation during the interview process, please contact our HR team.

Job Description Currently we are looking for Soils Inspectors for immediate Building & Infrastructure Projects Location: Greater New York City Metropolitan Area (Project Location Varies) Status: Part Time as Needed Duration: Extended Client: Varies Compensation: $30hr - $40/hr Based on Certification & Experience Soils / Geotechnical Inspector Role Overview The Soils / Geotechnical Inspector provides specialized inspection, testing, and verification services for earthwork, foundations, and geotechnical construction activities on Building & Infrastructure projects throughout the Greater New York City Metropolitan Area. This role supports both Quality Control (QC) and Quality Assurance (QA) programs in accordance with 1 RCNY §101-06, Chapter 17 of the NYC Building Code, the International Building Code (IBC), and applicable geotechnical standards. The Soils / Geotechnical Inspector is responsible for verifying that subsurface construction activities, materials, and installations conform to approved geotechnical reports, design documents, specifications, and code requirements. Typical work includes inspection of site preparation, excavation, subgrade preparation, structural fill placement, compaction, foundations, and soil improvement systems. This position requires an active on-site presence during earthwork and foundation activities, including witnessing required testing, verifying compliance with approved procedures, and coordinating closely with contractors, construction managers, testing laboratories, and design professionals. The inspector will proactively identify non-conforming conditions, document deficiencies, issue Non-Conformance Reports (NCRs), and verify corrective actions and re-testing. The Soils / Geotechnical Inspector plays a critical role in ensuring foundation performance, structural stability, constructability alignment, and long-term project durability, particularly on projects involving complex subsurface conditions or deep foundation systems. • Work responsibilities may include but are not limited to the following:, • Inspection of site preparation, excavation, and subgrade conditions, • Observation of structural fill placement, lift thickness, and compaction, • Perform or Witness Field density testing with a Nuclear Moisture Density Gauge, • Review laboratory test results, • Inspection of shallow and deep foundation elements (spread footings, caissons, piles, micro-piles), • Oversight of soil improvement methods (e.g., ground improvement, grouting, compaction methods), • Work hours may include early mornings, evenings, weekends, or night shifts depending on project requirements and concrete placement schedules., • Reporting & Documentation Requires you to:, • Prepare and submit daily inspection and test reports within required timeframe., • Utilize client or company reporting platforms as require, • Maintain organized and auditable inspection records. Requirements • A minimum of 3 years of experience inspecting construction work in the city of NY, varied in Size and complexity. Projects may include commercial high-rise buildings, residential towers, transportation infrastructure, utilities, institutional facilities, and public-sector construction., • Familiarity with 101-06 and Chapter 17 of the NYC building code and the International Building Code., • Holds OSHA 10 or OSHA 30 Certification taken within the last 5 years., • Well versed in all aspects of construction and QA/QC responsibilities, • Familiarity with applicable Soils & Geotechnical Systems, • Training and/or knowledge in fall protection, scaffolding and ladders, & work-zone safety, • High School Diploma or Equivalent, • Physical Abilities applicable to construction projects in the City of New York and the ability to work outdoors in varying weather conditions and navigate active construction sites, including climbing ladders, scaffolding, and walking uneven surfaces., • Currently holds certification as in one or more of the following:, • Bachelors Degree in Civil Engineering (accredited institution or equivalent), • ICC Certification Soils Special Inspector, • NICET Level I Geotechnical Certification, • NICET Level II Geotechnical Certification, • NICET Level III Geotechnical Certification In this roll you will: • Implement the quality assurance measures on varying construction projects., • Review and submit all required documentation in accordance with project specifications, • Continually monitor work-in-progress, • Issue Non-Conformance Reports (NCR) where necessary., • Conduct inspections/tests as appropriate and as required, • Coordinate all work with the General Contractor or CM, • Notify the contractor if there are deviations to the Contract documents (including Contract Design Documents), • Document all RFIs; field coordination, issues and their resolution; deficiencies; corrective action; re-tests/inspections; deviations from the Contract Documents (including Design Drawings), • Take a proactive approach to quality workmanship and work-in-progress, • Ensure components meet project specifications, • Practice safety in accordance with applicable and site-specific standards Qualified professionals will also have: • Ability to communicate with colleagues and clients of all levels, • Experience working with Microsoft Office Suite, • Ability to read and understand construction drawings & specifications, • Reliable means of transportation & valid driver’s license, • Willingness to learn, • Works well with a team and individually, • Familiarity with construction industry codes, • Mathematical Knowledge - Using mathematics to solve problems., • Installation Oversight - Installing equipment, machines, to meet specifications., • Equipment Selection Oversight - Determining tools and equipment needed to do a job., • Ability to provide inspection reports in a timely manor, • Willingness to obtain additional certifications, • Works well with a team and individually MISTRAS Group, Inc. is committed to equal employment opportunity. Employment decisions including initial hiring and all matters involving the terms and conditions of employment will be made without regard to any protected class under applicable law. If hired, the employment relationship is “At-Will,” which means that employment can be terminated at any time, and for any reason, at the option of either the Company or the employee. Please direct questions about these policies to a MISTRAS Group, Inc. Human Resources representative. By submitting & signing , I hereby understand and agree to the terms and conditions of employment as outlined above. I certify that the responses and information provided in this application (including any other supporting documentation such as a cover letter, resume, or transcript) are true and accurate to the best of my knowledge. I understand that misrepresenting or omitting information requested is cause for dismissal at any time, without notice. I hereby give the Company permission to contact schools, previous employers (unless otherwise indicated), references, and others disclosed in my application. Note to Applicants: Smoking is prohibited in all indoor areas of the Company. Employees may use designated smoking areas (if established) in accordance with applicable state and local law. Rhode Island Applicants: The Company is subject to Chapters 29-38 of Title 28 of the General Laws of Rhode Island, and is therefore covered by the state’s workers’ compensation law. Initial (if applicable): Massachusetts Applicants: I understand that it is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Initial (if applicable): Maryland Applicants: I UNDERSTAND THAT UNDER MARYLAND LAW, AN EMPLOYER MAY NOT REQUIRE OR DEMAND, AS A CONDITION OF EMPLOYMENT, PROSPECTIVE EMPLOYMENT OR CONTINUED EMPLOYMENT, THAT ANY INDIVIDUAL SUBMIT TO OR TAKE A POLYGRAPH OR SIMILAR TEST. AN EMPLOYER WHO VIOLATES THIS LAW IS GUILTY OF A MISDEMEANOR AND SUBJECT TO A FINE NOT EXCEEDING $100. Mistras Group, Inc. is an Equal Opportunity Employer/Veterans/Disabled:

Job Description Senior Geotechnical/Structural Engineer Location: New York, NY (Fashion District) Employment Type: Full-time We are recruiting on purpose for an experienced Senior Geotechnical/Structural Engineer to join our growing team in New York City. This is a high-impact role for a motivated professional eager to lead complex engineering efforts that range from investigation and design to rehabilitation and forensic analysis. You’ll work on diverse infrastructure and structural projects, applying your expertise in both geotechnical and structural engineering to deliver resilient, safe, and efficient solutions. Key Responsibilities As a senior technical leader, your responsibilities will include: • Geotechnical – GEOSLOPE, Slide, Plaxis, LPILE, Settle3D, DeepEX, CIVILTech, • Structural – ETABS, SAP2000, RISA, • Work on challenging, multidisciplinary projects that make a real-world impact, • Be part of a collaborative, mission-driven team, • Grow professionally through mentorship, training, and visibility in the industry, • Flexible, supportive culture with opportunities to lead Ready to build what matters? Apply today and help shape the built environment with innovative, high-integrity engineering. Would you like a version tailored for LinkedIn or Indeed, or formatted as a PDF brochure for outreach campaigns?

Job DescriptionSalary: $63,000 - 91,500 Annual Base Salary DOE About mcfa: We are a professional services firm in the Architecture/Engineering/Construction (AEC) industry serving public and private sector clients in the Mid-Atlantic region. Our services include Strategy, Planning, Program Management & Construction Management. Our goal is to help every employee design a fulfilling career through alignment of their individual passions/skills with the vision of the organization. Our mission is "Inspiring People and Places through Project Leadership and Project Development." How you'll get to contribute: We are seeking a dedicated and skilled Construction Inspector for soil testing inspections and future road and bridge inspection projects. Our ideal candidate will be a highly motivated & qualified individual, with experience in quality assurance and quality control testing of materials related to soils and aggregates in the field. Candidate should have a solid understanding of civil engineering principles with a geotechnical focus, and a desire to work on multi-disciplinary projects. In this role, you will be responsible for overseeing and inspecting various highway and/or bridge construction projects across New Jersey, ensuring that all work is completed in accordance with established standards, specifications, and regulations. This role will also involve office engineer duties as outlined below. Work schedule varies according to job assignments and/or contractors' schedule, to include night work, weekends, and holidays. This job requires travel to various job sites. What you'll do: • Material quality services are completed through field operations in all the major material disciplines as directed (soils, aggregate, metals, structures, asphalt, concrete coatings, and paints)., • Observe field work to ensure workmanship and materials meet standards., • Inspect soil boring operations -- roadway borings, retaining wall borings, bridge borings., • Soil identification., • Prepare field boring logs in accordance with NJ Turnpike procedures., • Install wells and record monitoring well data., • Enter data for Test calculations., • Maintain project records., • Ability to document daily inspections and various other reports., • Provide daily inspections of highway and/or bridge construction projects and inspect related work materials to ensure compliance with design specifications, safety standards, and state regulations., • Prepare detailed reports on inspection findings, including recommendations for corrective actions when necessary., • Monitor and document the progress of construction activities, identifying any deviations from the planned schedule or specifications., • Communicate with prime and other subcontractors., • Coordinate with project team members, engineers, and contractors to address and resolve any issues that arise during construction., • Ensure that the contracted drilling firm carries out its work in accordance with contract specification., • Review and interpret construction plans, blueprints, and specifications to ensure accurate implementation on-site., • Assist in the development and implementation of quality control procedures., • Attend meetings and conferences as needed., • Travel to various project sites. Who you are: • Bachelor's degree in Civil Engineering, Construction Engineering, Geological Engineering, Structural Engineering, or related field., • Familiar with ASTM and AASHTO standards for testing and inspections., • Strong knowledge of construction methods, materials, and legal regulations., • Excellent communication and interpersonal skills., • Ability to read and interpret engineering drawings and specifications., • Proficient in Microsoft Office and project/construction management software., • Valid driver's license, consistent means of transportation to/from project sites, and willingness to travel to various project sites within New Jersey., • 2+ years of experience in construction inspection, with a focus on transportation infrastructure projects and/or soil testing., • Familiarity with Bentley gINT software., • Certifications/Trainings, • OSHA 30, • American Concrete Institute (ACI) - Soil Inspector, Concrete, • International Code Council (ICC) - Soil Inspector, Masonry steel, Bolting, Welding, Post installed anchors, • TR1 Special Inspections, • New Jersey DCA Certified, • NICET I certification in Highway Construction Inspection or Construction Materials Testing Soils., • Professional Engineer (P.E.) license., • NJSAT and TCC/TCP Certifications. What's in it for you: Annual Paid Time Off: • Sick Leave: 5 Days (40 Hours), • Vacation: 15 Days (120 Hours), • Following your first full quarter worked, you will qualify for a profit-share bonus that is distributed at the end of each quarter if company targets are hit., • Incoming Growth Units: 10, • Eligible to participate in mcfa's family medical, dental and vision coverage; plan access begins on the first day of employment., • mcfa contributes up to 75% shared cost, not to exceed $700 per month., • Company paid life insurance plan (up to $100,000 per employee)., • You are eligible to participate in Company retirement plan (401k) on first day of employment with mcfa. mcfa Core Values (LEADS): • Love (each other, mission, work), • Entrepreneurial (spirit of innovation), • Accountability (to ourselves, our clients, each other), • Delight (customers and teammates), • Stretch (individual and collective growth mindset) mcfa is an Equal Employment Opportunity Employer. mcfa does not discriminate against any applicant or employee with regard to hiring, tenure of employment, promotion, transfer, selection for training, or any other terms or conditions of employment because of race, color, religion, sex, age, sexual orientation, disability, gender identity or national origin, status as a Vietnam-era or special disabled veteran in accordance with applicable federal law, or on any ground protected by state or local law in each area in which mcfa maintains facilities. #ZR

Job DescriptionDescription: KS Engineers (KSE) is a mid-size engineering and surveying firm ranked among the leaders in design services. With seven offices across New York, New Jersey, Pennsylvania, and Connecticut, we have been delivering transportation and public infrastructure design and survey services for more than 35 years. KSE offers a full range of employee benefits, including medical, dental and vision insurances, a 401(k) plan, paid time off, Flexible Spending Accounts (FSAs), long- and short-term disabilities, and term life insurance. KSE is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Position – Special Inspector - ICC Soils Reports to: Manager – Special Inspections Job Summary: A Soils Special Inspector in New York City is responsible for ensuring that earthwork, foundations, and soil compaction comply with the NYC Building Code (Chapter 17) and the project’s specific geotechnical report. This role is a "field-heavy" position that requires high technical accuracy to ensure the structural stability of New York’s high-density developments. The Soils Special Inspector performs mandated third-party inspections and testing of soil conditions, fill placement, and foundation elements. You will verify that the subsurface work matches the approved architectural/engineering plans and the NYC Department of Buildings (DOB) Technical Reports (TR1). Technical Responsibilities: • Site Preparation & Subgrade Inspection: Verify that the site is stripped of organic matter and prepared according to the Geotechnical Report (BC 1704.7.1) before footings or fill are placed., • Fill Placement Monitoring: Oversee the placement of structural fill, ensuring lift thicknesses do not exceed code limits (typically 8–12 inches) and that the material matches specified classifications (BC 1704.7.2)., • In-Place Density Testing: Perform field density tests using a Nuclear Moisture-Density Gauge (Troxler/Humboldt) to ensure soil reaches the required compaction percentage (usually 95% Modified Proctor)., • Foundation Oversight: Inspect excavations for shallow foundations (spread footings) and deep foundations (piles, caissons, or helical piers) to confirm bearing capacity and depth (BC 1704.8/1704.9)., • Reporting: Prepare and submit Daily Field Reports (DFRs). Identify non-conformance issues (NCRs), document them with photos, and verify when they have been corrected and re-tested., • Safety Compliance: Maintain a safe work environment in active excavation zones, adhering to OSHA standards and NYC DOB site safety protocols. Technical Skills: • Ability to read and interpret complex Foundation Plans, Borings Logs, and Geotechnical Reports., • Proficiency in field testing equipment (Sand cone, Nuclear gauge, Dynamic Cone Penetrometer)., • Entry-Level (1-3 years) or Mid-Level (4-9 years) in inspecting construction work in the city of NY, varied in size and complexity., • Bachelor’s Degree in Geotechnical, Civil, or Structural Engineering with 1 year of relevant experience; OR NICET Level 1 Geotechnical Certification with 2 years of relevant experience OR ICC Soils Special Inspector certification with 1 year of relevant experience., • ICC Soils, • Nuclear Gauge Safety Certification (U.S. Dept. of Transportation), • OSHA 30, • Familiarity with soil sampling and testing as per requirements of Chapter 17 of the NYC building code. Professional Development: • Willing to pursue professional development, training, and licensing. Physical requirements: • Handle, inspect, and /or feel materials and/or equipment relevant to the job., • Move around on the jobsite, including ascending or descending on the landscape or usage of scaffolding or on a ladder, and positioning oneself appropriately to assess necessary testing materials and equipment, usually for prolonged periods of time., • Lift and/or move up to 50lbs for some types of monitoring and inspections. Salary range: $28-45 per hour based on experience KS Engineers, P.C. is an EOE/AA/VEV/Disabled Employer. KSE will not discriminate based on race, color, religion, creed, sex, national origin, marital status, age, disability, veteran status, citizenship status, or other status protected by law.

Job Description Foth is a 100% member-owned science and engineering consulting firm headquartered in Wisconsin, with over 85 years of success. Our 750 members across 32 locations are dedicated to solving our clients’ toughest science and engineering challenges. Consistently ranked by Engineering News Record in the top 150 firms, we offer a values-based, collaborative, and flexible work environment with professional growth opportunities. If you thrive working alongside a smart and caring team, Foth may be the place for you. Join our team and experience the Foth difference that contributes to our impressive 92+% member retention rate! Learn more at foth.com/careers. Foth is seeking a Lead Waterfront Engineer/Project Manager to support and grow our Ports, Harbors, and Waterfront practice in New York City. This role will serve as a technical and project delivery leader on waterfront and marine infrastructure projects across the United States, including the Atlantic, Gulf and Pacific coasts as well as the Great Lakes while playing a key role in expanding Foth’s presence in the NYC market. The successful candidate will lead the planning, design, and delivery of waterfront, marine, and coastal infrastructure projects nationwide, including ports and terminals, piers, wharves, bulkheads, berthing and mooring systems, and shoreline protection systems. While the role offers exposure to projects across multiple regions of the country, the position will be anchored in New York City, with a strong emphasis on local market growth, client development, and office establishment. This position will work closely with Foth’s existing NYC-based waterfront engineer to help establish strengthen local client relationships, and support project delivery nationally. Key Responsibilities: Technical Leadership & Engineering • Serve as technical lead and engineer-of-record for waterfront, marine, and coastal structural engineering projects nationwide, • Lead the planning, analysis, and design of marine structures including piers, wharves, dolphins, bulkheads, seawalls, revetments, and related infrastructure, • Perform and oversee coastal analysis, load development, structural modeling, and engineering calculations, • Develop, review, and oversee construction documents, including plans, specifications, and technical reports, • Maintain working knowledge of regulations and codes affecting waterfront infrastructure, with familiarity of NYC, NY State, and Northeast permitting environments, • Proactively identify and help implement new design tools, analysis methods, and execution technologies relevant to marine and waterfront engineering Project Management & Delivery • Serve as Project Manager on select projects, responsible for scope, schedule, budget, and quality, • Support and manage projects across multiple regions, including the Northeast, Southeast, California, and Midwest, • Coordinate with internal multidisciplinary teams including coastal, geotechnical, civil, environmental, and construction services, • Develop project work plans, staffing plans, schedules, and budgets in collaboration with discipline leads, • Monitor project performance, financials, and risks throughout project execution, • Support construction-phase services including shop drawing review, RFIs, inspections, and on-site construction support NYC Market Growth • Support Foth’s strategic effort to grow in the New York City area, working closely with existing NYC-based staff and firm leadership, • Help grow Foth’s waterfront and marine presence in the NYC and greater NY–NJ metropolitan region, while leveraging experience from national projects, • Assist with local and national business development efforts, including identifying opportunities, supporting pursuits, and developing proposals, • Build and maintain relationships with public agencies, port authorities, terminal operators, industrial clients, and private developers, • Represent Foth at industry events, client meetings, and professional organizations in the NYC region and nationally as appropriate Leadership, Mentorship & Collaboration • Mentor and develop junior and mid-level engineers within the waterfront/marine structural discipline, • Support development of standard work practices, design guides, and technical resources for the discipline, • Collaborate with Foth’s Technical Competency Leaders to strengthen firmwide technical excellence, • Lead and participate in technical and client-facing presentations for both national and local audiencesRequired Qualifications:, • Bachelor’s Degree in Civil, Ocean, or Structural Engineering, • Minimum of 10 years of engineering experience, with a background in structural, coastal, mechanical, or environmental engineering, including at least 7 years focused specifically on structural engineering in feasibility, design, and/or construction management, • Experience with developing construction documents including plans and specifications, • Professional Engineer License (or ability to obtain within 12 months)Preferred Qualifications:, • Master’s Degree in Civil or Structural Engineering, • 15+ years of experience with an engineering consulting firm, with emphasis on waterfront, marine, coastal, or port infrastructure, • Experience serving in Project Manager or Task Manager roles on multi-disciplinary projects, • Professional experience with regulatory frameworks across the Northeast, Southeast, Midwest, and/or West Coast, • Existing professional relationships with port authorities, public agencies, or waterfront clients Colorado Residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information. Notice to Third Party Recruiters/Agencies: Foth does not accept unsolicited resumes from third party recruiting firms. Absent a signed recruiting agreement coordinated through Foth, Foth reserves the right to pursue and hire candidates without financial obligation to third party recruiters or agencies. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Currently we are looking for Fire Protection Inspectors for immediate Building & Infrastructure Projects Location: Greater New York City Metropolitan Area (Project Location Varies) Status: Part Time as Needed Duration: Extended Client: Varies Compensation: $25hr - $40/hr Based on Certification & Experience Fire Protection Inspector Role Overview The Fire Protection Inspector provides specialized inspection and verification services for fire and life-safety systems on Building & Infrastructure projects throughout the Greater New York City Metropolitan Area. This role supports both Quality Control (QC) and Quality Assurance (QA) programs in accordance with 1 RCNY §101-06, Chapter 17 of the NYC Building Code, the International Building Code (IBC), and applicable NFPA standards, as required by each project. The Fire Protection Inspector is responsible for verifying that fire protection systems and fire-resistive construction are installed in strict conformance with approved design documents, shop drawings, specifications, code requirements, and manufacturer instructions. Systems may include, but are not limited to, sprinkler and standpipe systems, fire suppression piping, spray-applied fireproofing, firestopping, fire dampers, and related life-safety components. This role requires an active on-site presence during installation and testing activities, including witnessing required inspections, hydrostatic tests, acceptance testing, and special inspections. The inspector will coordinate closely with contractors, construction managers, testing laboratories, special inspection agencies, and client representatives to ensure all fire protection work meets regulatory and project-specific requirements. The Fire Protection Inspector plays a critical role in life-safety compliance, proactively identifying non-conforming conditions, documenting deficiencies, issuing Non-Conformance Reports (NCRs) where required, and verifying corrective actions and re-inspections. Clear documentation, timely communication, and strict adherence to code requirements are essential to the success of this role. • Work responsibilities may include but are not limited to the following:, • Inspection of fire suppression piping, hangers, seismic bracing, and supports, • Inspection of spray-applied fire-resistive materials (SFRM) and intumescent coatings, • Verification of firestopping systems and through-penetration fire assemblies, • Witnessing hydrostatic, flush, and acceptance tests for water-based systems, • Review of approved shop drawings, material submittals, and test reports, • Work hours may include early mornings, evenings, weekends, or night shifts depending on project requirements and concrete placement schedules., • Reporting & Documentation Requires you to:, • Prepare and submit daily inspection and test reports within required timeframe., • Utilize client or company reporting platforms as require, • A minimum of 3 years of experience inspecting construction work in the city of NY, varied in Size and complexity. Projects may include commercial high-rise buildings, residential towers, transportation infrastructure, utilities, institutional facilities, and public-sector construction., • Familiarity with 101-06 and Chapter 17 of the NYC building code and the International Building Code., • Holds OSHA 10 or OSHA 30 Certification taken within the last 5 years., • Well versed in all aspects of construction and QA/QC responsibilities, • Familiarity with applicable Soils & Geotechnical Systems, • Training and/or knowledge in fall protection, scaffolding and ladders, & work-zone safety, • High School Diploma or Equivalent, • Physical Abilities applicable to construction projects in the City of New York and the ability to work outdoors in varying weather conditions and navigate active construction sites, including climbing ladders, scaffolding, and walking uneven surfaces., • Currently holds certification as in one or more of the following:, • Bachelors Degree in Architecture (accredited institution or equivalent), • Bachelors Degree in Engineering (accredited institution or equivalent), • ICC Certification as a Spray Applied Fireproofing Special Inspector, • NICET Level II Certification in Fire Protection – Inspection and Testing of Water based Systems, • NYC Licensed Class A or Class B Master Fire Suppression Piping Contractor License In this roll you will: • Implement the quality assurance measures on varying construction projects., • Review and submit all required documentation in accordance with project specifications, • Continually monitor work-in-progress, • Issue Non-Conformance Reports (NCR) where necessary., • Conduct inspections/tests as appropriate and as required, • Coordinate all work with the General Contractor or CM, • Notify the contractor if there are deviations to the Contract documents (including Contract Design Documents), • Document all RFIs; field coordination, issues and their resolution; deficiencies; corrective action; re-tests/inspections; deviations from the Contract Documents (including Design Drawings), • Take a proactive approach to quality workmanship and work-in-progress, • Ensure components meet project specifications, • Practice safety in accordance with applicable and site-specific standards Qualified professionals will also have: • Ability to communicate with colleagues and clients of all levels, • Experience working with Microsoft Office Suite, • Ability to read and understand construction drawings & specifications, • Reliable means of transportation & valid driver’s license, • Willingness to learn, • Works well with a team and individually, • Familiarity with construction industry codes, • Mathematical Knowledge - Using mathematics to solve problems., • Installation Oversight - Installing equipment, machines, to meet specifications., • Equipment Selection Oversight - Determining tools and equipment needed to do a job., • Ability to provide inspection reports in a timely manor, • Willingness to obtain additional certifications, • Works well with a team and individually MISTRAS Group, Inc. is committed to equal employment opportunity. Employment decisions including initial hiring and all matters involving the terms and conditions of employment will be made without regard to any protected class under applicable law. If hired, the employment relationship is “At-Will,” which means that employment can be terminated at any time, and for any reason, at the option of either the Company or the employee. Please direct questions about these policies to a MISTRAS Group, Inc. Human Resources representative. By submitting & signing , I hereby understand and agree to the terms and conditions of employment as outlined above. I certify that the responses and information provided in this application (including any other supporting documentation such as a cover letter, resume, or transcript) are true and accurate to the best of my knowledge. I understand that misrepresenting or omitting information requested is cause for dismissal at any time, without notice. I hereby give the Company permission to contact schools, previous employers (unless otherwise indicated), references, and others disclosed in my application. Note to Applicants: Smoking is prohibited in all indoor areas of the Company. Employees may use designated smoking areas (if established) in accordance with applicable state and local law. Rhode Island Applicants: The Company is subject to Chapters 29-38 of Title 28 of the General Laws of Rhode Island, and is therefore covered by the state’s workers’ compensation law. Initial (if applicable): Massachusetts Applicants: I understand that it is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Initial (if applicable): Maryland Applicants: I UNDERSTAND THAT UNDER MARYLAND LAW, AN EMPLOYER MAY NOT REQUIRE OR DEMAND, AS A CONDITION OF EMPLOYMENT, PROSPECTIVE EMPLOYMENT OR CONTINUED EMPLOYMENT, THAT ANY INDIVIDUAL SUBMIT TO OR TAKE A POLYGRAPH OR SIMILAR TEST. AN EMPLOYER WHO VIOLATES THIS LAW IS GUILTY OF A MISDEMEANOR AND SUBJECT TO A FINE NOT EXCEEDING $100. Mistras Group, Inc. is an Equal Opportunity Employer/Veterans/Disabled:

Job Description Location: Greater New York City Metropolitan Area (Project Location Varies) Status: Part Time as Needed Duration: Extended Client: Varies Compensation: $32.50hr - $42.50/hr Based on Certification & Experience Masonry Inspector Role Overview The Masonry Inspector provides specialized inspection and verification services for masonry construction on Building & Infrastructure projects throughout the Greater New York City Metropolitan Area. This role supports both Quality Control (QC) and Quality Assurance (QA) programs in accordance with 1 RCNY §101-06, Chapter 17 of the NYC Building Code, the International Building Code (IBC), and applicable masonry standards. The Masonry Inspector is responsible for verifying that masonry materials, reinforcement, placement, construction methods, and workmanship conform to approved contract documents, structural drawings, specifications, and code requirements. This includes inspection of reinforced and unreinforced masonry systems used in load-bearing and non-load-bearing applications. This position requires an active on-site presence during masonry construction activities, including observation of reinforcing steel placement, grout placement, masonry unit installation, and associated testing. The inspector coordinates closely with contractors, construction managers, special inspectors, testing laboratories, and client representatives to ensure inspections and tests are performed at the appropriate stages of work. The Masonry Inspector plays a critical role in ensuring structural integrity, durability, and code compliance, proactively identifying non-conforming conditions, documenting deficiencies, issuing Non-Conformance Reports (NCRs) where required, and verifying corrective actions and re-inspections. • Work responsibilities may include but are not limited to the following:, • Inspection of CMU, brick, stone, and architectural masonry installations, • Verification of reinforcing steel size, placement, spacing, and anchorage, • Observation of grout placement, consolidation, and curing, • Verification of masonry unit type, mortar, grout, and material certifications, • Inspection of anchors, embeds, lintels, and bond beams, • Work hours may include early mornings, evenings, weekends, or night shifts depending on project requirements and concrete placement schedules., • Reporting & Documentation Requires you to:, • Prepare and submit daily inspection and test reports within required timeframe., • Utilize client or company reporting platforms as require, • Maintain organized and auditable inspection records Requirements • A minimum of 3 years of experience inspecting construction work in the city of NY, varied in Size and complexity. Projects may include commercial high-rise buildings, residential towers, transportation infrastructure, utilities, institutional facilities, and public-sector construction., • Familiarity with 101-06 and Chapter 17 of the NYC building code and the International Building Code., • Holds OSHA 10 or OSHA 30 Certification taken within the last 5 years., • Well versed in all aspects of construction and QA/QC responsibilities, • Familiarity with applicable Soils & Geotechnical Systems, • Training and/or knowledge in fall protection, scaffolding and ladders, & work-zone safety, • High School Diploma or Equivalent, • Physical Abilities applicable to construction projects in the City of New York and the ability to work outdoors in varying weather conditions and navigate active construction sites, including climbing ladders, scaffolding, and walking uneven surfaces., • Currently holds certification as in one or more of the following:, • ICC Certification as a Structural Masonry Special Inspector In this roll you will: • Implement the quality assurance measures on varying construction projects., • Review and submit all required documentation in accordance with project specifications, • Continually monitor work-in-progress, • Issue Non-Conformance Reports (NCR) where necessary., • Conduct inspections/tests as appropriate and as required, • Coordinate all work with the General Contractor or CM, • Notify the contractor if there are deviations to the Contract documents (including Contract Design Documents), • Document all RFIs; field coordination, issues and their resolution; deficiencies; corrective action; re-tests/inspections; deviations from the Contract Documents (including Design Drawings), • Take a proactive approach to quality workmanship and work-in-progress, • Ensure components meet project specifications, • Practice safety in accordance with applicable and site-specific standards Qualified professionals will also have: • Ability to communicate with colleagues and clients of all levels, • Experience working with Microsoft Office Suite, • Ability to read and understand construction drawings & specifications, • Reliable means of transportation & valid driver’s license, • Willingness to learn, • Works well with a team and individually, • Familiarity with construction industry codes, • Mathematical Knowledge - Using mathematics to solve problems., • Installation Oversight - Installing equipment, machines, to meet specifications., • Equipment Selection Oversight - Determining tools and equipment needed to do a job., • Ability to provide inspection reports in a timely manor, • Willingness to obtain additional certifications, • Works well with a team and individually MISTRAS Group, Inc. is committed to equal employment opportunity. Employment decisions including initial hiring and all matters involving the terms and conditions of employment will be made without regard to any protected class under applicable law. If hired, the employment relationship is “At-Will,” which means that employment can be terminated at any time, and for any reason, at the option of either the Company or the employee. Please direct questions about these policies to a MISTRAS Group, Inc. Human Resources representative. By submitting & signing , I hereby understand and agree to the terms and conditions of employment as outlined above. I certify that the responses and information provided in this application (including any other supporting documentation such as a cover letter, resume, or transcript) are true and accurate to the best of my knowledge. I understand that misrepresenting or omitting information requested is cause for dismissal at any time, without notice. I hereby give the Company permission to contact schools, previous employers (unless otherwise indicated), references, and others disclosed in my application. Note to Applicants: Smoking is prohibited in all indoor areas of the Company. Employees may use designated smoking areas (if established) in accordance with applicable state and local law. Rhode Island Applicants: The Company is subject to Chapters 29-38 of Title 28 of the General Laws of Rhode Island, and is therefore covered by the state’s workers’ compensation law. Initial (if applicable): Massachusetts Applicants: I understand that it is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Initial (if applicable): Maryland Applicants: I UNDERSTAND THAT UNDER MARYLAND LAW, AN EMPLOYER MAY NOT REQUIRE OR DEMAND, AS A CONDITION OF EMPLOYMENT, PROSPECTIVE EMPLOYMENT OR CONTINUED EMPLOYMENT, THAT ANY INDIVIDUAL SUBMIT TO OR TAKE A POLYGRAPH OR SIMILAR TEST. AN EMPLOYER WHO VIOLATES THIS LAW IS GUILTY OF A MISDEMEANOR AND SUBJECT TO A FINE NOT EXCEEDING $100. Mistras Group, Inc. is an Equal Opportunity Employer/Veterans/Disabled:

Job Description About the Role The Engineering group at AKRF is seeking a Geotechnical Engineer to be based out of New York City. The potential candidate will have the opportunity to work in an environment of encouragement and collaboration to help AKRF shape the future of our communities. Job Responsibilities: • Providing geotechnical oversight and logging of geotechnical explorations (borings, test pits, CPTs);, • Developing laboratory and field testing programs;, • Preparing engineering reports, including the evaluation of collected field and laboratory results, preparation of figures and drawings;, • Preparing engineering analyses for slope stability, settlement and consolidation estimates, deep foundation design (compressive, uplift, and lateral capacities), mat foundation design, ground surcharging, and ground improvement techniques (soil grouting, ground freezing, etc.), and soil liquefaction;, • Management of multiple projects (prior project management skills a plus);, • Working knowledge and related field experience regarding foundation-related construction in urban areas;, • 8-12 years’ experience, • Bachelor’s degree in civil engineering (a master’s degree with a concentration in Geotechnical Engineering is a plus)., • Engineer-In-Training Certificate, • NYS PE licensure preferred, PE licensure in other states will be required to obtain NYS licensure within 6 months of hire., • Required to travel to work sites in New York City, Long Island, the Hudson Valley, Connecticut and New Jersey, with work being performed Monday through Friday with the possibility of occasional overtime, evening, and weekend work., • OSHA 10-hr or 40-hour HAZWOPER training a plus. Compensation will range from $120k to $150K, and commensurate with experience. Why Work at AKRF Founded in 1981, AKRF is an award-winning consulting firm with 400 planners, engineers, designers, economists, ecologists, geologists, historians, archaeologists, acousticians, and many other types of professionals guided by the belief that to be original is to be transformative. Professionals join and remain at AKRF for our corporate-casual environment that values flexible work schedules and locations, and balances award-winning projects with social impact initiatives, charitable giving, and plenty of fun and games. We foster a diverse, equitable, and inclusive environment where employees are respected and valued in honor of their identities; we strive to deliver on this promise every day. Our cookie exchanges and ice cream socials are quite the treat. What We Offer We provide employees with a benefit package that reflects our respect for your workplace contributions, professional goals, and personal priorities. The benefits program at AKRF includes: • Medical, Dental, Vision insurance, • Vacation and Sick time, • Flexible work schedules and locations, • 401(k) retirement plan with employer matching, • Additional Voluntary Life Insurance, • Short- and Long-Term Disability, • Stock Ownership, • Tuition Reimbursement, • Training and professional development courses, • Opportunities for community outreach through internal networks, • Charitable donation match AKRF enforces a policy of equal employment opportunity in our daily operations. The firm has a demonstrated history of hiring, training, developing, promoting and retaining minority group members and women. All employment-related decisions are based solely on relevant criteria and without regard to race, color, religion, age, sex, pregnancy, national origin, age, physical or mental disability, marital status, sexual orientation, sexual identity, caregiver status, military/veteran status or citizenship status, or any other character

Job DescriptionAbout Us Solar Landscape is the leading commercial rooftop solar developer in the U.S. Only 4% of commercial rooftops host solar today — we’re changing that, fast. Commercial rooftop solar is the fastest, smartest way to build new clean power — delivering megawatts of generation in months, not years, and powering America’s energy and future right where it’s needed most. By turning rooftops into local power plants, we’re reshaping how — and how fast — energy gets built in the U.S. Recognized as the #1 Distributed Generation Developer by New Project Media, the #1 National Commercial Rooftop Solar Developer by Solar Power World, and winner of the U.S. Department of Energy’s Grand Prize for Clean Energy, Solar Landscape is defining the future of energy generation in America. Headquartered in Asbury Park, New Jersey, Solar Landscape has offices in Chicago, Baltimore, and New York City and operates in over a dozen states nationwide. We move fast, solve hard problems, and take our work seriously — but never ourselves. We value clear thinking, accountability, and execution. At the same time, we’re collaborative by default, and believe the best work happens when people enjoy working together. Our team is made up of smart, grounded people who show up for each other — whether that’s troubleshooting a system design or catching up over lunch. If you’re looking to do meaningful work in a high-performance environment — and be part of the team reshaping how energy gets built in the U.S. — we’d love to meet you. About The Role We are seeking a Solar Project Engineer to join our dynamic team and contribute to the development and execution of high-quality solar energy projects. As a Project Engineer at Solar Landscape, you will be responsible for hands-on design and overseeing external consultant design development of Solar Photovoltaic systems. This is an excellent opportunity for an engineering professional passionate about renewable energy and innovative solutions. Responsibilities • Deliver design and problem-solving services that support project schedules to the assigned project teams., • Plan and lead the design development effort for all assigned project teams., • Support Design team as part of initial training process and where needed thereafter., • Oversee/Design/Support commercial and grid supplied Solar Photovoltaic systems., • Prepare technical drawings, specifications of PV systems to ensure that installation and operations conform to standards and customer requirements., • Conduct detailed site evaluations., • Coordinate with structural, electrical, geotechnical, and civil Professional Engineers during design process to assure the design meets technical and code requirements. Manage professional engineer review process to obtain PE stamps on drawing packages., • Provide technical support to Commercial Sales and Finance for the development of technical proposals and customer presentations., • Participate in meetings and technical presentations to customers, investors, and PV technical community., • Provide engineering/technical input and direction to site evaluation, interconnect agreements and other associated tasks., • Work with appropriate electric utilities to prepare and process interconnection paperwork., • Review specifications for purchases of materials or equipment., • Identify appropriate equipment for use in PV systems and perform technical qualification of vendors., • Support Project Management and construction team with ongoing technical support, RFI’s, and As-builts., • Review of other design engineers’ work during design phase., • Lead cross-functional design reviews., • Develop necessary customer deliverables such as concept module layouts, single line diagrams, equipment or material specifications, engineering validation, 3-D renderings, and photo simulations., • Assist with Request for Proposal (RFP) reviews, technical writing, and response coordination.Qualifications, • Bachelor’s degree in Engineering (Electrical, Mechanical, Structural, or Civil preferred)., • 2+ years of experience in solar., • Proficiency in AutoCAD and MS Office Suite., • Experience in electrical, mechanical, structural, or civil engineering design., • Strong organizational, analytical, and problem-solving skills with the ability to manage priorities effectively., • Excellent verbal and written communication skills., • Ability to work independently and collaboratively in a fast-paced environment., • Acute attention to detail and strong judgment in decision-making., • Demonstrated ability to plan, organize, and execute projects effectively.Salary will vary depending on your location and job-related skills and experience. This is an incentive-based position with the potential to earn more. For part-time roles, your compensation will be adjusted to reflect your hours.Benefits and Perks We offer competitive compensation and benefits designed to support you inside and outside of work: · Training / Professional development opportunities · 401(k) with 4% company match· Summer Fridays· Flexible remote/hybrid work options· Paid parental leave· Team lunches, events, and stocked kitchens· Modern, collaborative office spaces in Asbury Park, New York City, Boston, Chicago, and Baltimore· Medical, dental, and vision coverage· Company-paid life and long-term disability insurance We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionAbout the Role As a Project Engineer on our Engineering team, you'll play a central role in advancing solar and distributed generation projects from early development through construction-ready design. Working closely with our Development, Construction, and third-party engineering teams, you'll own the technical work that turns a project concept into a permitted, optimized, buildable system—driving accuracy, efficiency, and value at every stage. What You'll Own • Site Due Diligence – Coordinate and oversee environmental analysis, surveys, and geotechnical investigations; bid, negotiate, and manage contracts for third-party diligence work on active development projects., • Engineering Design – Review site data and produce civil, electrical, and structural design drawings using AutoCAD and Virto, independently or in collaboration with external engineers of record., • System Optimization – Iterate designs to identify the optimal equipment, layout, and system configuration that maximizes specific yield and overall project value., • Energy Modeling – Develop detailed energy models in PVSyst, incorporating 3D shading scenes, soiling calculations, site-specific losses, and carefully selected weather data., • Permitting & Construction Drawings – Oversee the development of permit and construction-level drawings across all disciplines, ensuring code compliance, AHJ and utility conformance, and alignment with Madison technical specifications., • Education – Bachelor's degree in Engineering or equivalent experience; Electrical Engineering preferred, though Mechanical, Civil, and Energy Engineering backgrounds have also been successful in this role., • Experience – 3+ years designing and permitting photovoltaic construction projects, or comparable transferable experience in a related field., • Technical Skills – Proficiency in AutoCAD and PVSyst (or equivalent energy modeling tools); familiarity with Procore or similar project management platforms., • Design Judgment – Ability to translate site due diligence findings into optimized, code-compliant designs across civil, electrical, and structural disciplines., • Mindset – Highly organized, detail-oriented, and self-directed; comfortable managing multiple projects simultaneously and working efficiently within defined budgets and schedules., • Collaboration – Strong communicator who can lead technical meetings with clients, engineers, regulators, and consultants and hold third parties accountable to quality and timelines.Benefits, • PTO and company holidays, • Medical, dental, vision, • Employer-paid short-term disability, long-term disability, life insurance, • 401(k) and company match, • Professional development stipend, • Strong culture of collaboration, performance, and personal growth$115,000 - $145,000 a yearThe actual salary offered may vary depending on job-related factors including, but not limited to knowledge, skills, experience and location.How We WorkAt Madison Energy Infrastructure, we believe in the power of clean energy infrastructure to drive real impact—for our customers, our partners, and the communities we serve. We've quickly emerged as a preeminent developer, investor, and operator of distributed generation, helping organizations across sectors meet their energy goals with certainty, speed, and trust. Our robust portfolio consists of over half a gigawatt of clean energy infrastructure projects across more than 25 states.We're building a team that thrives on ownership and ambition. As we expand into direct, end-to-end services for Fortune 500 companies, public entities, and nonprofits alike, we rely on collaborative thinkers who bring structure to complexity, energy to execution, and curiosity to every challenge.Our environment is fast-paced and outcome-oriented—but grounded in the belief that how we work together matters as much as what we deliver. If you're excited to shape the future of clean energy and be part of a high-performance, high-integrity team, we'd love to meet you.Madison Energy Infrastructure is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.

Bachelor's degree in Construction Management, Civil Engineering, or related field (preferred).Proven experience with secant piles, caissons, soldier pile and lagging systems, and steel bracing (walers, struts, rakers).Strong understanding of geotechnical principles, soil classifications, and site lo

Job Description Company Description Geotechnical Engineering Services, P.C. (GES) is a leader in geotechnical engineering, serving the New York City Metropolitan Area and other locations including New Jersey, Connecticut, Pennsylvania, Virginia, and Florida. With over 20 years of experience, GES has earned a reputation for reliability and excellence in consulting services for projects ranging from residential developments to complex infrastructures like the Second Avenue Subway. The company works with high-profile clients such as the New York City School Construction Authority, Con Edison, and Verizon. GES provides tailored solutions through subsurface investigations, geotechnical recommendations, detailed reporting, and construction inspections, ensuring quality, safety, and timely project completion. Role Description This is a full-time hybrid role for a Geotechnical Engineer based in the New York City Metropolitan Area, with a mix of on-site and remote work. Applicants should be flexible to work on occasional weekends if the site requires it. Typical duties include: • Preparation of Daily Field Reports, • Design of Support of Excavation and Underpinning and of AutoCAD Drafting of SOE Drawings, • Analysis of Retaining Walls, including site visits, calculations, sketches, and reports concerning the safety of existing retaining walls., • Perform special inspection of piles, support of excavation, underpinning, excavation and backfilling etc., • Collaborate with design teams, engineers, and clients to address project-specific needs is an integral part of the role., • Drafting of Geotechnical Investigation reports, • Inspection of geotechnical borings, dynamic cone penetrometer probes, and test pits., • Foundation Design, including piles, SOE walls, retaining walls., • Knowledge and experience in Site Investigation and subsurface data collection, • Strong understanding of Soil Mechanics and Geotechnical Engineering principles, • Expertise in Engineering Geology and its application in construction projects, • Proficiency in Foundation Design practices for various project scales, • Strong analytical, problem-solving, and communication skills, • Bachelor's degree in Geotechnical Engineering, Civil Engineering, or related field; advanced degree is a plus, • Experience with soil analysis software and geotechnical design tools, • Ability to work in both field and office environments, with a willingness to travel locally, • Professional Engineer (PE) license or working towards obtaining the PE is a plus Job Type: Full-time Benefits: • 401(k), • Dental insurance, • Health insurance, • Paid time off, • Vision insurance Pay: $75,000.00 - $95,000.00 per year Work Location: Multiple locations Company DescriptionGeotechnical Engineering Services, P.C. (GES) is a leader in geotechnical engineering, serving the New York City Metropolitan Area and other locations including New Jersey, Connecticut, Pennsylvania, Virginia, and Florida. With over 20 years of experience, GES has earned a reputation for reliability and excellence in consulting services for projects ranging from residential developments to complex infrastructures like the Second Avenue Subway. The company works with high-profile clients such as the New York City School Construction Authority, Con Edison, and Verizon. GES provides tailored solutions through subsurface investigations, geotechnical recommendations, detailed reporting, and construction inspections, ensuring quality, safety, and timely project completion.Geotechnical Engineering Services, P.C. (GES) is a leader in geotechnical engineering, serving the New York City Metropolitan Area and other locations including New Jersey, Connecticut, Pennsylvania, Virginia, and Florida. With over 20 years of experience, GES has earned a reputation for reliability and excellence in consulting services for projects ranging from residential developments to complex infrastructures like the Second Avenue Subway. The company works with high-profile clients such as the New York City School Construction Authority, Con Edison, and Verizon. GES provides tailored solutions through subsurface investigations, geotechnical recommendations, detailed reporting, and construction inspections, ensuring quality, safety, and timely project completion.

Job Description Geotechnical department is looking for a candidate to support our growing team in the New York southern tier area (not New York City). This employee may be an entry level up to an associate level. Salary is negotiable based on prior experience and may be a wider range than listed based on discussions with supervisor and division director. Duties: • Perform geotechnical field services, which may include subsurface exploration layouts, drilling and test pit inspections, geophysical surveys, and construction monitoring., • Perform visual classification and laboratory testing of soil samples collected during the subsurface investigation., • Prepare subsurface exploration logs for use in geotechnical evaluations and reports., • B.S degree in civil engineering or related field., • 0 - 3 years of progressive experience in the geotechnical field., • Prior experience in a geotechnical laboratory is preferred but not required., • Engineer in Training (EIT) is preferred but not required., • Driver's license required., • Position will require out of town field work based on workload (approximately 40%), • Position will require ability to lift 50 pounds., • Effective verbal and written communication skills., • Possess a high capacity for self-motivation., • Ability to apply engineering principles to a variety of geotechnical projects. Salary Range: $60,000 - $75,000 The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Paid Parental Leave, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description Geotechnical Project Engineer/Manager to join its collaborative team in New York City, White Plains, or Melville, Long Island. This position offers a hybrid work schedule. This individual will serve a key function in providing geotechnical engineering expertise through geotechnical analysis and design, and efforts that support management of projects, supervision of staff engineers, and interfacing with clients. In this role, you will have the opportunity to partner cross-functionally on both small-scale and large-scale geotechnical projects primarily in office, residential, and retail\warehouse markets. Job Responsibilities • Perform complex analyses, structural design of pile elements and underpinning systems, and special engineering inspections;, • Prepare technical documents and manages the preparation of the proposals, reports, construction documents, and construction-related correspondence associated with the projects managed;, • Supervise field investigations, and conventional earthwork and foundation construction activities;, • Perform and manage multiple projects and tasks within specific budgets, schedules, and deadlines. Plans, schedules and develops task and project budgets. Prepare progress reports, draft change orders, draft invoices, and project billings;, • Bachelor's degree in Civil or Geotechnical Engineering; Master's degree with Geotechnical emphasis;, • Professional Engineer licensure;, • 6+ years of related Geotechnical experience;, • 3+ years of field experience with geotechnical investigations and construction observation experience including: mass grading, deep foundations, subgrade for footings, ground improvement, and excavation support including tieback installation and testing;, • Proven experience in preparing technical reports, specifications, construction plans, and geotechnical recommendations; writing proposals; running/coordinating projects; managing clients; managing billings; and reviewing the work of staff and mentoring staff;, • Strong understanding of codes and other regulatory requirements;, • Knowledge of quantitative/technical analyses and related software;, • Possess an entrepreneurial and professional demeanor, as well as strong written, verbal, and presentation communication skills;, • Desire and ability to seek out new business opportunities and develop additional clients while maintaining project workload;, • Ability to coach and assist with the management of staff;, • Demonstrated ability to work with staff, clients, and regulatory agencies;, • A collaborative team player with excellent interpersonal and social skills; and, • Possess reliable transportation for client meetings and job site visits and a valid driver's license in good standing.

Job Description Build Your Career at FCC Construction Inc. With 125 years of experience, the FCC Group's Infrastructure Division is present in 25 countries, and its activities cover all areas of engineering and construction. It is a leader in the execution of transport infrastructure, as well as in residential and non-residential construction. FCC Construcción is currently the fourth-largest construction company in Spain in terms of contract volume and ranks among the top 30 in the world, according to the international magazine ENR (Engineering News-Record). Project Opportunity We are looking for a Instrumentation & Monitoring Engineer to join our FCC Team assigned to the MTA’s Second Avenue Subway Project. This position is based in New York, NY, and requires daily presence in the office and/or on construction sites. The MTA’s Second Avenue Subway project is a $7.7B expansion that will extend the Q Line from 96th Street into East Harlem, adding three new ADA-accessible stations at 106th, 116th, and 125th Streets. This long-awaited project will restore rapid transit access to a community underserved for decades, ease overcrowding on the Lexington Avenue line, and cut commute times—delivering a transformative impact for East Harlem residents and the city as a whole. This position will support the $2 billion design-build contract for Phase 2, which includes two tunnels that will enable the development of two new subway stations in New York. Led by Connect Plus Partners, a joint venture between FCC Construction and Halmar International, the project brings together extensive experience in large-scale infrastructure, complex tunneling, and urban transit construction. POSITION SUMMARY Reports to: Technical Director The Instrumentation & Monitoring Engineer is responsible for coordinating the installation, management, and monitoring of instrumentation systems used to assess the behavior of ground conditions, adjacent buildings, and structures impacted by tunneling and shaft construction. The Instrumentation & Monitoring Engineer’s key responsibilities are: • Coordinate the installation and monitoring of instrumentation systems in accordance with contract requirements and design specifications, • Manage instrumentation activities in collaboration with subcontractors, third-party consultants, and internal teams, • Coordinate closely with Construction and Survey teams to ensure timely and accurate monitoring aligned with project schedules, • Ensure all instrumentation data is collected, validated, and reported per contract requirements, including baseline and weekly reporting, • Serve as Project Administrator for iSite, ensuring all instrumentation assets are properly logged, monitoring data is consistently uploaded/maintained, and trigger levels, alarms, and notifications are configured and functioning, • Develop and maintain the Response Action Plan (RAP), including alarm thresholds and response protocols, • Coordinate updates to the Geotechnical Instrumentation Plan with subcontractors, • Attend and support Excavation Support (RES) meetings, ensuring monitoring data is current and available, • Analyze instrumentation data and collaborate with site teams to assess structural behavior and risk, • Participate in coordination meetings with client representatives, including MTA and consultants, • Bachelor’s degree in Civil Engineering, Geotechnical Engineering, or related field preferred, • Minimum 5 years of experience (8+ years preferred) in heavy civil infrastructure projects, • Required experience in urban construction environments (tunneling, underground, or similar complex projects), • Experience with instrumentation and monitoring systems for geotechnical or structural applications, • Familiarity with web-based monitoring/data systems (e.g., iSite) strongly preferred, • Proficiency in Microsoft Office (Word, Excel), • Experience with CAD and ProjectWise is a plus, • Experience on similar large-scale urban infrastructure projects, • Ability to work extended hours or weekends as needed based on project demands, • Ability to sit for extended periods while working at a computer and reviewing technical data and reports, • Ability to occasionally stand, walk, and navigate active construction sites, including uneven terrain, confined spaces, and varying elevations, • Ability to climb ladders, stairs, and access shafts or underground work areas as required, • Visual acuity to read detailed plans, instrumentation data, and computer screens, • Ability to wear required Personal Protective Equipment (PPE), including hard hat, safety vest, safety glasses, and steel-toe boots when in the field FCC is dedicated to creating an inclusive workplace where diversity is valued and respected. As an Affirmative Action/Equal Opportunity Employer, we do not discriminate against any applicant for employment or employee because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, genetics, creed, veteran status, military status, or any other characteristic protected under Federal, State, or local laws. Reasonable accommodation will be provided to qualified individuals with disabilities in accordance with applicable law.

Job Description Position Title: Structural Project Engineer (Licensed NY PE) About Us PVEDI is a national, multidisciplinary architecture and engineering firm providing comprehensive services across diverse industries and market sectors. We bring together creative and detail-oriented specialists to deliver high-value, personalized solutions to complex design challenges. With 7 offices across 5 states and a team of 175+ professionals, we combine the responsive culture of a small firm with the robust resources and expertise of a large company. Our integrated services include civil engineering, land planning, surveying, environmental consulting, structures design, building envelope consulting, MEP, forensics and inspection, compliance reporting, architectural design, interior design, landscape architecture, and planning—particularly for commercial, leisure, hospitality, residential, and planning projects. The Opportunity We are seeking a talented and motivated Professional Engineer (PE) with expertise in structural design and analysis to join our growing team in New York. This position offers a primarily technical role with clear pathways for advancement into project leadership for candidates with interest in career development. Role and Responsibilities This dynamic position spans from detailed structural engineering to potential project oversight, tailored to your skills and career aspirations: Core Technical / Engineering Duties • Perform structural design and analysis (steel, concrete, timber, masonry, etc.) for buildings, infrastructure, and industrial/process support structures, • Prepare calculation packages, technical specifications, and design documentation, • Produce construction drawings, details, specifications, and design deliverables, • Review and coordinate structural submittals, respond to RFIs, issue addenda, and review shop drawings, • Conduct site visits for periodic observation, construction administration, and verification of field conditions, • Perform structural assessments, retrofit/rehabilitation/repair designs, and forensic investigations, • Conduct structural peer review or QA/QC checks (self-check, or for junior staff), • Assist or lead project scope definition, scheduling, resource planning, and budgeting, • Act as client technical liaison, attend client meetings, present design decisions, • Coordinate internal engineering resources, delegate tasks, and mentor less experienced engineers, • Participate in proposals, estimates, technical write-ups, and business development, • Professional Engineer (PE) license in New York (required), • Bachelor's degree in Civil or Structural Engineering (Master's degree strongly preferred), • 5-8+ years of proven experience in structural engineering design, calculations, drawings, and analysis in a consulting/design office environment, • Advanced proficiency with structural analysis and design software, • Experience with Revit or similar modeling software is highly desirable, • Strong technical writing skills for reports, memos, and calculations, • Excellent verbal and written communication abilities with cross-disciplinary collaboration skills, • Self-driven, detail-oriented, organized approach with ability to manage multiple tasks under deadlines This position is based in our New York, NY office (10018). Sign-on bonus eligible PVEDI provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, PVEDI complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. PVEDI expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status.

Job Description About the Company & Project Our client is a leading global Consultancy renowned for delivering high-profile, complex, iconic, large-scale capital projects. We are currently seeking a dedicated and accomplished Geotechnical Engineer for the Hudson Tunnel Project (HTP). This is a once in a lifetime opportunity to contribute to this landmark project that is poised to deliver transformative impacts across economic, transportation, and environmental sustainability. The busiest rail connection between New York, New Jersey, and the Northeast Corridor, the Hudson Tunnel Project will improve capacity, reliability, and resiliency of commuter and intercity rail transit serving 800,000 daily passengers from Washington, D.C. to New York and New England. This is a milestone project that is slated to receive nearly $12 billion in federal funding, the largest investment in a mass transit project in modern history. As a Geotechnical Engineer on the project, you will play a pivotal role in the delivery of this significant project. This is a fantastic opportunity to be part of a mission that aligns with our clients purpose: to create responsible places that bring transformative impact to their people, communities, and societies. Responsibilities The Geotechnical Engineer will support the Surface Alignment Contract and will work on design and construction of complex structures including foundations, retaining structures, underpinning, support of excavation systems, embankments and culverts in soft ground conditions for this contract. • Support and oversee geotechnical subsurface investigations, including in‑situ testing, boring logs, field records, and development of geotechnical subsurface profiles and ground characterization., • Provide field and site supervision for geotechnical construction activities, including deep and shallow foundations, excavation, ground improvement, compaction, and geotechnical instrumentation and monitoring., • Monitor, document, and report daily geotechnical and foundation construction activities, preparing accurate daily field reports and supporting construction compliance., • Assist with geotechnical and foundation design for underground structures in soil and rock, including drilled shafts, driven piles, micropiles, excavation support systems, and slope stability and seepage analyses., • Perform and review advanced geotechnical analyses, including numerical modeling, liquefaction assessments, seismic site classification, and evaluation of excavation and ground improvement systems using industry-standard software., • Assist in the preparation, review, and coordination of Geotechnical Data Reports, Geotechnical Baseline Reports, design calculations, technical memoranda, and engineering reports., • Bachelor's degree in Civil Engineering; a Master's degree with a geotechnical focus is advantageous., • Strong academic foundation in geotechnical engineering, including soil and rock mechanics, laboratory and field testing, and construction practices, • Approximately 5–10 years of progressive experience in geotechnical engineering, with preference for work performed in the New Jersey / New York City region., • Engineer‑in‑Training (EIT) credential required; Professional Engineer licensure in New Jersey, or the ability to obtain licensure, is strongly preferred., • Working knowledge of industry‑standard geotechnical analysis and design software for foundations, excavation support, and slope stability (e.g., LPILE, GROUP, FB‑MultiPier, Slope‑W, Seep‑W, DeepEx, PLAXIS, Settle3D, or similar tools)., • Familiarity with commonly referenced geotechnical design manuals, guidelines, and technical publications.

Job Description Geotechnical Project Engineer/Manager to join its collaborative team in New York City, White Plains, or Melville, Long Island. This individual will serve a key function in providing geotechnical engineering expertise through geotechnical analysis and design, and efforts that support management of projects, supervision of staff engineers, and interfacing with clients. In this role, you will have the opportunity to partner cross-functionally on both small-scale and large-scale geotechnical projects primarily in office, residential, and retail\warehouse markets. Job Responsibilities • Perform complex analyses, structural design of pile elements and underpinning systems, and special engineering inspections;, • Prepare technical documents and manages the preparation of the proposals, reports, construction documents, and construction-related correspondence associated with the projects managed;, • Supervise field investigations, and conventional earthwork and foundation construction activities;, • Perform and manage multiple projects and tasks within specific budgets, schedules, and deadlines. Plans, schedules and develops task and project budgets. Prepare progress reports, draft change orders, draft invoices, and project billings;, • Bachelor's degree in Civil or Geotechnical Engineering; Master's degree with Geotechnical emphasis;, • Professional Engineer licensure;, • 6+ years of related Geotechnical experience;, • 3+ years of field experience with geotechnical investigations and construction observation experience including: mass grading, deep foundations, subgrade for footings, ground improvement, and excavation support including tieback installation and testing;, • Proven experience in preparing technical reports, specifications, construction plans, and geotechnical recommendations; writing proposals; running/coordinating projects; managing clients; managing billings; and reviewing the work of staff and mentoring staff;, • Strong understanding of codes and other regulatory requirements;, • Knowledge of quantitative/technical analyses and related software;, • Possess an entrepreneurial and professional demeanor, as well as strong written, verbal, and presentation communication skills;, • Desire and ability to seek out new business opportunities and develop additional clients while maintaining project workload;, • Ability to coach and assist with the management of staff;, • Demonstrated ability to work with staff, clients, and regulatory agencies;, • A collaborative team player with excellent interpersonal and social skills; and, • Possess reliable transportation for client meetings and job site visits and a valid driver's license in good standing.

Job DescriptionJob Title: Civil Engineer Please book a time to meet with me: Job Description This role involves working as a Civil Project Engineer, collaborating across various segments including Environmental, Civil, Geotechnical, and Architecture. The position focuses on site civil and land development projects, encompassing the design of site layouts, grading, stormwater management, utilities, soil erosion, sediment control measures, landscaping, lighting, and project management. Responsibilities also include zoning and land development permitting, field inspection, hydraulic and hydrologic design and analysis, site plan drafting, environmental impact assessment, and preparation of project documents. Responsibilities • Design site layouts and grading plans., • Manage stormwater and drainage design projects., • Develop utilities and soil erosion and sediment control measures., • Coordinate landscaping and lighting plans., • Oversee project management tasks, including zoning and land development permitting., • Conduct field inspections and collaborate on hydraulic and hydrologic design and analysis., • Draft site plans and conduct environmental impact assessments., • Minimum of 3 years experience with stormwater management, site and grading design, zoning, and site plan permitting., • Proficiency in AutoCAD with at least 3 years of experience., • Experience in land surveying and development projects for at least 3 years., • At least 2 years of experience using Civil 3D for site civil projects., • Experience with Hydrocad is a plus., • EIT certification is advantageous., • Experience with Carlson is beneficial. The work environment offers a very open and collaborative office space with remote flexibility depending on the position. There is constant communication with team members, fostering a supportive and team-oriented atmosphere. The company is known for its competitive salary, quarterly performance-based bonuses, end-of-year bonuses, and opportunities for upward mobility and career growth. They provide great mentorship, invest in their employees, and offer travel reimbursement. The firm specializes in site/civil/traffic engineering consulting, permitting, expediting, construction administration, landscape architecture, and planning across various regions, including the northeast, mid-Atlantic, south, and Midwest. Job Type & Location This is a Permanent position based out of New York, NY. Pay and Benefits The pay range for this position is $70000.00 - $130000.00/yr. Medical Plans (via Aetna): PPO Plus: Lower deductible ($600 individual / $1,200 family), copays for office visits, and prescription coverage. HDHP with HSA: Higher deductible ($1,900 individual / $3,800 family), but includes a Health Savings Account (HSA) with tax advantages. Dental: Delta Dental Plan. Vision: VSP Vision Plan. Telemedicine: Available through Aetna and MyAdvocate. Mental Health: Inpatient and outpatient services covered. Additional Coverage: Critical illness, accident, hospital indemnity, and identity protection insurance 401(k) Profit Sharing Plan: Available immediately upon hire. Vesting: Details not specified, but typically phased over several years. Stock Purchase Plan: Available after 90 days. Profit Sharing Trust Retirement Plan: Available within one year, depending on hire date Health Care FSA Dependent Care FSA Limited Purpose FSA (for HSA participants) Health Savings Account (HSA): Available with HDHP plans Vacation & Sick Pay Holidays Birth & Bonding Leave Jury Duty & Funeral Pay Workplace Type This is a fully onsite position in New York,NY. Application Deadline This position is anticipated to close on May 8, 2026. Diversity, Equity & Inclusion At Actalent, diversity and inclusion are a bridge towards the equity and success of our people. DE&I is embedded into our culture through: • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.

Pursuing a Bachelor's Degree in Civil Engineering at a College/University, or pursuing a degree in a related field with relevance to Civil Engineering, ideally with goal of pursuing a career in Geotechnical Engineering. Geotechnical engineering (residential and/or commercial/industrial/office site d

Geotechnical Engineering Field Technician. This is a great opportunity for individuals looking to build a career inconstruction observation, geotechnical consulting, or environmental field services. High school diploma/GED required; Associate’s or Bachelor’s degree in Civil or Geotechnical Engi

We are seeking an experienced Engineering Geologist to provide expert geological and geotechnical support for transportation infrastructure projects across New Jersey and New York. Valid New York State Professional Engineering or Professional Geologist license.

Geotechnical or Environmental Engineering. Geotechnical, Environmental & Monitoring (GEM) Department.

Our Transportation practice includes the following groups: Bridge and Structural Engineering, Civil Engineering, Resident Engineering and Inspection, Bridge Inspection, and Geotechnical Engineering. This role will see the candidate involved in various phases of structural bridge inspection projects

Urgently Hiring for Geotechnical Field Technician Roles in Little Ferry, NJ.

Job Description POSITION SUMMARY Reports to: Cavern General Manager The Cavern Superintendent is responsible for overseeing daily field operations for the excavation, support, waterproofing, and structural work associated with large underground caverns, including station boxes, crossovers, and ventilation shafts. Working closely with field crews, subcontractors, engineers, and support staff, the Superintendent ensures that construction activities are executed safely, efficiently, and in compliance with design specifications and project schedules. This is a field-based leadership role that requires deep experience in underground construction techniques, with a strong focus on safety, productivity, and quality in challenging subsurface environments. The Cavern Superintendent’s key responsibilities are: • Supervise day-to-day underground activities for cavern excavation, initial support, waterproofing, and structural concrete installation., • Coordinate excavation sequences in accordance with the approved excavation and support design., • Ensure proper installation of rock bolts, lattice girders, shotcrete, and other support systems as per design requirements., • Oversee subcontractor operations and ensure alignment with construction plans, quality standards, and safety regulations., • Monitor production rates, daily progress, and manpower utilization; adjust work plans and resources to optimize performance., • Enforce site safety protocols and lead daily toolbox talks, hazard assessments, and inspections., • Collaborate with field engineers, geotechnical staff, and surveyors to interpret ground conditions and adjust excavation or support strategies as needed., • Assist with implementation of ground stabilization and grouting operations in coordination with design team and geotechnical personnel., • Supervise placement of waterproofing membranes and related materials to ensure continuity and compliance., • Coordinate installation of formwork, rebar, and placement of cast-in-place concrete for final lining and cavern structures., • Monitor and interpret instrumentation data and respond to deviations from expected values., • Maintain accurate field documentation including daily reports, timesheets, shift logs, and material tracking., • Communicate with the Cavern General Manager regarding field progress, issues, delays, or design concerns., • Support quality assurance efforts through field inspections and oversight of material testing and workmanship., • Participate in shift handovers and provide clear guidance for 24/7 operations., • Coordinate logistics in confined underground environments, including muck handling, ventilation, utilities, and material deliveries., • Identify and help resolve field conflicts, constructability issues, or discrepancies between design and field conditions., • Ensure that all fieldwork complies with environmental and regulatory requirements., • Bachelor’s degree in civil engineering, mining engineering, construction management preferred, or equivalent field experience., • Minimum of 15 years of experience in underground construction, with at least 10 years in cavern or large-span excavation., • Strong leadership and coordination skills., • Experience managing crews in complex underground environments., • Strong technical knowledge of cavern excavation methods (e.g., heading-and-bench, full face), initial support systems, and structural concrete., • Familiarity with ground support installation, waterproofing systems, and final lining techniques., • Proficiency in reading and interpreting underground construction drawings and specifications., • Experience in deep excavation and mined cavern environments with variable geology., • Ability to lead crews in confined and hazardous underground conditions., • Strong communication skills and ability to coordinate with multidisciplinary field teams., • Problem-solving mindset with the ability to respond to changing site conditions., • Must be highly organized and capable of maintaining accurate field records., • Willingness to work extended hours, rotating shifts, weekends, and holidays as required., • Work is primarily performed at active construction sites, including underground and surface environments., • Must be able to stand, walk, and climb for extended periods; navigate uneven ground, scaffolding, and ladders; and work around heavy equipment., • Exposure to noise, dust, vibration, confined spaces, and varying weather conditions is common., • Requires regular use of personal protective equipment (PPE), including hard hats, safety boots, high-visibility clothing, and eye/ear protection., • Ability to perform site inspections, monitor field activities, and respond quickly to safety or operational issues in physically demanding conditions., • Flexibility to work extended hours, nights, weekends, and rotating shifts as project demands require. FCC is dedicated to creating an inclusive workplace where diversity is valued and respected. As an Affirmative Action/Equal Opportunity Employer, we do not discriminate against any applicant for employment or employee because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, genetics, creed, veteran status, military status, or any other characteristic protected under Federal, State, or local laws. Reasonable accommodation will be provided to qualified individuals with disabilities in accordance with applicable law.

Job Description Build Your Career at FCC Construcción With 125 years of experience, the FCC Group's Infrastructure Division is present in 25 countries, and its activities cover all areas of engineering and construction. It is a leader in the execution of transport infrastructure, as well as in residential and non-residential construction. FCC Construcción is currently the fourth-largest construction company in Spain in terms of contract volume and ranks among the top 30 in the world, according to the international magazine ENR (Engineering News-Record). Project Opportunity We are looking for a Tunnel Superintendent to join our FCC Team assigned to the MTA’s Second Avenue Subway Project. This position is based in New York, NY, and requires daily presence in the office and/or on construction sites. The MTA’s Second Avenue Subway project is a $7.7B expansion that will extend the Q Line from 96th Street into East Harlem, adding three new ADA-accessible stations at 106th, 116th, and 125th Streets. This long-awaited project will restore rapid transit access to a community underserved for decades, ease overcrowding on the Lexington Avenue line, and cut commute times—delivering a transformative impact for East Harlem residents and the city as a whole. This position will support the $2 billion design-build contract for Phase 2, which includes two tunnels that will enable the development of two new subway stations in New York. Led by Connect Plus Partners, a joint venture between FCC Construction and Halmar International, the project brings together extensive experience in large-scale infrastructure, complex tunneling, and urban transit construction. Position Summary Reports to: Tunnel General Manager The Tunnel Superintendent is responsible for supervising daily tunneling operations, including excavation, ground support, waterproofing, and final lining, ensuring that all work is executed safely, efficiently, and in accordance with design specifications and the project schedule. This field-based leadership role involves direct coordination with crews, subcontractors, surveyors, engineers, and support personnel in challenging underground conditions. The Tunnel Superintendent is assigned to TBM, SEM, or conventional tunnel excavation zones and plays a central role in delivering high-quality tunnel works on schedule and within budget. The Tunnel Superintendent’s key responsibilities are: • Supervise and coordinate all field activities related to tunnel excavation, initial support, waterproofing, and final lining., • Manage daily construction operations for TBM, SEM, or conventional tunneling methods, ensuring alignment with project requirements., • Direct crews and subcontractors in tasks such as mucking, ventilation setup, ring installation, shotcrete application, rock bolting, and membrane installation., • Monitor ground conditions and interface with geotechnical personnel to adapt excavation and support techniques as needed., • Enforce strict adherence to safety protocols and lead daily toolbox talks, field briefings, and safety inspections., • Coordinate site logistics for material handling, utility relocations, muck disposal, and equipment operations in confined tunnel environments., • Maintain accurate daily reports, shift logs, and quantity tracking; input progress data into project management systems., • Interface with survey, quality control, and engineering teams to verify work alignment, tolerances, and compliance with design drawings., • Support resolution of constructability issues, field clashes, or deviations from the design., • Participate in shift handovers, workforce allocation planning, and schedule coordination with other project areas., • Ensure timely installation and backfilling of instrumentation as required by the monitoring program., • Collaborate with the Tunnel Construction Manager and Tunnel General Manager to address productivity goals, staffing needs, and corrective actions., • Oversee tunnel safety systems including ventilation, gas detection, and emergency egress routes., • Provide direct supervision of the excavation and support of mined tunnel excavations., • Be physically present in the tunnel during each shift to lead tunneling activities., • Responsible for executing mined tunnel excavation, installation of initial support systems, shotcrete application, and grouting operations to ensure safety, quality, and timely completion., • Implement remedial or contingency measures promptly when ground loss, water inflow, or instability occurs or is anticipated., • Ensure compliance with the Tunnel Work Plan and initiate actions when ground movement Threshold Limit Values (TLVs) are approached or exceeded, and when ground loss or instability or water inflow occurs or appears likely to occur., • Maintain thorough record keeping of tunneling activities and field conditions., • Supervise TBM excavation, segmental lining installation, and annulus grouting, and monitor instrumentation data., • Be physically present during each TBM operating shift and oversee all related activities in real time., • Bachelor’s degree in civil engineering, mining engineering, or construction management is preferred, or equivalent field experience., • Minimum of 15 years of progressive experience in tunnel construction, with at least 10 years in a superintendent or senior supervisory role., • Minimum of 10 years of experience in mined tunnel construction using shotcrete and/or rock bolt support in similar ground conditions., • Minimum of 10 years of experience executing pressurized-face TBM tunnels in variable rock, soil, or mixed-face conditions with segmental lining., • Must hold all licenses and permits required by local agencies or applicable authorities., • Proven experience in TBM and/or SEM operations, including ground support installation, waterproofing, and lining systems., • In-depth understanding of underground construction sequencing, cycle times, and productivity tracking., • Demonstrated leadership in managing large field crews in high-risk, confined underground environments., • OSHA 30 or equivalent construction safety certification is required., • Ability to read and interpret complex tunnel design drawings, specifications, and submittals., • Familiarity with quality assurance processes, inspection protocols, and environmental compliance. Job Requirements • Hands-on experience with pressurized-face TBM operations, segmental lining installation, SEM excavation, or conventional drill-and-blast tunneling., • Familiarity with tunnel ground control measures, including grouting, dewatering, and pre-support techniques., • Ability to work in rotating shifts (including nights and weekends) in confined, underground spaces with exposure to dust, noise, and vibration., • Strong written and verbal communication skills with the ability to maintain clear and organized records., • Basic understanding of instrumentation monitoring systems and tunnel safety systems (e.g., gas detection, ventilation monitoring)., • Problem-solving mindset with the ability to respond to real-time field conditions and make decisions under pressure. Physical Demands • Work is primarily at active underground construction sites with exposure to confined spaces, dust, noise, vibration, and variable ground conditions., • Must be able to stand, walk, and climb for extended periods; navigate uneven ground, scaffolding, and ladders; and work around heavy tunneling equipment., • Requires regular use of personal protective equipment (PPE), including hard hats, safety boots, high-visibility clothing, and eye/ear protection as necessary., • Ability to perform site inspections, monitor field activities, and respond quickly to safety or operational issues in physically demanding conditions., • Flexibility to work extended hours, nights, weekends, and rotating shifts as project demands require., • Occasional office-based work is required for reviewing documents, preparing reports, and coordinating with project management teams. Work Environment FCC is dedicated to creating an inclusive workplace where diversity is valued and respected. As an Affirmative Action/Equal Opportunity Employer, we do not discriminate against any applicant for employment or employee because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, genetics, creed, veteran status, military status, or any other characteristic protected under federal, state, or local laws. Reasonable accommodations will be provided to qualified individuals with disabilities in accordance with applicable law. If you need a reasonable accommodation during the interview process, please contact our HR team.

Job Description Superintendent – $100M+ Projects + High-Impact Civil Work + Leadership Growth Lead major excavation, SOE, and foundation projects in a role where your field leadership directly drives execution, safety, and delivery on complex, high-value builds. Step into a position where you’ll oversee critical site operations, manage crews and subcontractors, and bring deep geotechnical and structural understanding to challenging urban construction environments. Responsibilities: • Oversee daily field operations for excavation, SOE, and foundation work, • Coordinate subcontractors, crews, and site logistics to ensure schedule adherence, • Interpret construction drawings, geotechnical reports, and structural plans, • Manage safety, quality, and compliance across all site activities, • Support cost control, budgeting, and change order execution 10+ years of experience in construction project management, with emphasis on excavation, SOE, and foundation work. Proven experience with secant piles, caissons, soldier pile and lagging systems, and steel bracing (walers, struts, rakers). Strong understanding of geotechnical principles, soil classifications, and site logistics. Ability to read and interpret construction drawings, structural and geotechnical reports. Proficient with construction scheduling software (e.g., Primavera P6, MS Project). Experience with cost control, budgeting, and change order management. Excellent leadership, communication, and problem-solving skills. OSHA 30 preferred PMP Certification preferred Deep Foundation Institute (DFI) training or related certifications preferred. Engineering-in-Training (EIT) or PE license (plus) preferred. Skills and Certifications [note: bold skills and certification are required] P.E. License strongly Preferred SOE experience Project experience over 100M Recent GC experience

Job Description Geo-Technology Associates, Inc. (GTA) is hiring a Geotechnical Engineering Field Technician to join our growing team in Little Ferry, NJ! This is a great opportunity for individuals looking to build a career inconstruction observation, geotechnical consulting, or environmental field services. In this hands-on role, you’ll support geologists, engineers, and scientists on a variety of exciting projects across the private, state, and federal sectors. If you enjoy working outdoors, staying active, and learning in the field, we want to hear from you! What You’ll Be Doing: • Perform field and on-site lab testing of soil, concrete, asphalt, and other construction materials, • Conduct moisture and density testing, including nuclear density tests on compacted materials, • Collect and prepare samples for laboratory analysis, • Work directly with experienced professionals in a collaborative, team-focused environment This position involves extended standing, repetitive motions, and various physical tasks such as lifting, crouching, climbing, and kneeling. Full-body movement and mobility are important to safely and effectively perform in the field. GTA will provide you with Personal Protective Equipment, which includes High Visibility Vest, Hard Hat, Gloves, and Safety Glasses. Requirements What You’ll Need: • High school diploma/GED required; Associate’s or Bachelor’s degree in Civil or Geotechnical Engineering a plus!, • Valid driver’s license, clean driving record, and reliable transportation, • Steel-toe boots and readiness for physical work, • Ability to lift up to 60 pounds regularly and occasionally up to 80 pounds (e.g., concrete samples), • Comfortable with outdoor work, physical tasks, and variable site conditions, • Strong work ethic, self-motivated attitude, and team mindset, • NICET and/or ACI certifications are a plus—but we’re happy to train the right candidate Why You’ll Love Working With Us: We believe in taking care of our team—professionally, personally, and everything in between. Here’s what you can look forward to as part of our team: • Competitive Salary with generous Paid Time Off and Paid Holidays to support your work-life balance, • Annual Bonus Potential – your hard work deserves to be rewarded, • Comprehensive Health Coverage – including Medical, Dental, Vision, plus Health Savings and Flexible Spending Accounts, • Peace of Mind – with Company-paid Life Insurance and both Short- and Long-Term Disability Insurance, • Invest in Your Future – through our 401(k) with Company Match, • Education Assistance Program – helping you continue to grow and learn, • Employee Assistance Program – free access to short-term counseling, financial coaching, legal consultations, life coaching, and more, • Peak Health Wellness Plan – personalized nurse consultations, no-cost lab work, and ongoing wellness support, • Stay Connected & Inspired – with free memberships to professional societies, • Professional Development – Seminars, Conventions, Lunch & Learns, Mentoring, and Software Training to help you reach your goals, • Referral Bonuses – bring great people on board and get rewarded, • Recognition That Matters – we celebrate achievements big and small with our Employee Recognition Program, • Team Spirit & Fun – enjoy company picnics, events, and a welcoming, supportive work environment We ensure nondiscrimination and equal employment opportunity in all programs and activities in accordance with Title VI of the Civil Rights Act of 1964, and all revisions and addendums thereof.

The role involves project management, technical leadership, and mentorship within a collaborative environment. The position offers a competitive salary range between $132,380 and $220,630 along with comprehensive benefits.

Responsibilities Project management , including client development, project scoping, assembling and managing appropriate project teams, maintaining project schedules and budgets, and managing client expectations and deliverables Technical leadership , including applying sound engineering judgment

Bachelor of Science degree in Civil Engineering and/or Construction Management with adequate course work experience on Heavy Civil and Structural elements to demonstrate sufficient knowledge of geotechnical principles and practices, soil and rock mechanics and testing, and construction methods (a Ma

Job DescriptionDescription: KSE is a mid-size construction management and engineering firm ranking in the ENR Top 100 for CM and ENR Top 500 for design services. With seven offices across four states (NY, NJ, PA and CT), the firm has been providing transportation and public infrastructure construction services for more than three and half decades. KSE offers a full range of employee benefits, including medical, dental and vision insurances, a 401(k) plan, paid time off, Flexible Spending Accounts (FSAs), long- and short-term disabilities, and term life insurance. KSE is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Position: Geotechnical Field Engineer Reports: Geotechnical Manager Technical Responsibilities: • Perform geotechnical field investigations, explorations, geologic reconnaissance, and site mapping., • Prepare geotechnical field boring logs, soil and rock sampling, and field permeability testing., • Support geotechnical laboratory testing and analysis., • Perform basic engineering calculations, data interpretation, and technical analysis., • Assist in preparing geotechnical reports and project documentation., • Coordinate with subcontractors in the field to complete scope-of-work activities., • Travel to field assignments throughout NJ, NY, PA, and CT; occasional overnight stays may be required., • 0 to 3 years of experience as a Geotechnical Field Engineer., • Bachelor’s degree in civil engineering, Geotechnical Engineering, Geology, or a related field, • Green Infrastructure project experience and permeability testing is a plus, • Previous internship experience a plus., • Engineer-in-Training (EIT) certification – plus., • OSHA 10-hr or 40-hr HAZWOPER training – plus., • Experience with RSLog or gINT– plus., • Previous internship or field experience in geotechnical engineering – plus., • Ability to work independently and as part of a team., • Reliable transportation to travel between job sites and office/lab (mileage, tolls & parking reimbursed). Physical & Work Environment Requirements: • Ability to sit, stand, walk, climb, kneel, crouch, crawl, grasp, reach, push/pull, and perform repetitive motions as needed for field tasks., • Frequently lift and/or move up to 35 lbs. occasionally up to 75 lbs., • Visual acuity required for data analysis, computer use, reading, and site inspections., • Outdoor work performed 50–90% of the time, often on uneven terrain and in varying weather conditions., • Exposure to outdoor elements including insects, plants, animals, and environmental temperatures typical of the region., • Occasional exposure to hazards such as moving mechanical parts, vehicles, electrical systems, heights, scaffolding, or chemicals., • Daily travel ranging from 1 to 3 hours depending on project location; overnight travel may be required. Schedule: • Sites may require commute as long as 1 hour to 3 hours of driving. Sometimes overnight stay for the duration of the project., • The field inspections/visits are dictated by construction schedules and could include early morning or late evening timing at the project site., • Ability and willingness to work alternate hours, to include overnight hours as required by the project specific requirements., • The employee is subject to both inside and outside environmental and climate conditions, • The employee is expected to perform approximately 50 to 90 percent of their work week outdoors with the remaining time in the office. Outdoor work frequently includes walking on uneven surfaces in all types of weather conditions and may have exposure to animals, insects, plants, etc., • The employee is subject to hazards such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to various heat/cold temperatures typical of the region or exposure to chemicals., • Must have a reliable form of transportation to travel between job sites and the office/lab with equipment and/or samples. Miles, tolls, and parking reimbursed. What We Offer: • In-house Safety Training and free PPE to field staff., • Dedicated mentorship program., • Learning and Development initiatives., • Purpose driven opportunity to work on exciting infrastructure and sustainability projects building America., • Inclusive culture celebrating diversity., • Health Insurance Benefits with HSA option., • Disability, Life Insurance, and 401K Retirement Accounts., • Paid Vacation and Sick Time, Paid Holidays., • Tuition Reimbursement., • Career Advancements., • Company Holiday Party, Company Summer Outings, Friday Breakfast, Monthly Heritage Celebration Lunch, Lunch & Learn Programs. Pay Transparency: Base salary is $55,000 to $70,000 per year. Base salary is only one part of KS Engineers total compensation, which includes an annual discretionary bonus. KS Engineers, P.C. is an EOE/AA/VEV/Disabled Employer. KSE will not discriminate based on race, color, religion, creed, sex, national origin, marital status, age, disability, veteran status, citizenship status, or other status protected by law.

Job DescriptionMatrix New World Engineering, a part of True Environmental and its partner firms, have united their strengths to establish the nation's premier environmental and engineering services consulting firm. This powerhouse organization offers an extensive range of services aimed at revolutionizing the built environment and preserving the natural one. Its diverse expertise encompasses environmental remediation, urban planning, engineering iconic coastal and marine structures, developing sustainable energy sources, and pioneering resource extraction methods. Explore further at and True-Environmental.com to discover the full scope of our capabilities. Matrix New World is currently seeking a Senior Marine Structural Project Manager for the New York/New Jersey metro area. Matrix is a growing full-service environmental services and engineering firm offering unmatched expertise in delivering some of the nation's most exciting and complex infrastructure, resiliency, and sustainability projects, including such projects as FiDi Coastal Resiliency, Battery Park City Authority Resiliency, and Bush Terminal Pier 6 Redevelopment. As a Senior Project Manager, you will be responsible for leading engineering staff, projects, and tasks in the marine and coastal engineering field. You will provide engineering, inspection and/or permitting leadership, coordinate with clients, contractors, and other stakeholders, and develop new business and project proposals. The successful candidate will have broad experience that encompasses a wide array of marine, coastal, and waterfront structural/geotechnical engineering projects. This will include inspection, design, rehabilitation, permitting, and/or construction oversight for bulkheads, piers, marine terminals, fendering and mooring systems, ferry landings, living shorelines, stone revetments, and other port-related infrastructure.What you'll do • Oversee project scope, schedule, budget and QA/QC process for marine and coastal projects., • Provide support on multiple and multi-discipline design projects, including analyzing and documenting critical design and permitting elements., • Supervise and mentor staff and is responsible for allocation of manpower., • Coordinate with clients, contractors, outside consultants, government agencies and company staff, including providing technical support/oversight to team members., • Develop new business and assist in the preparation of project proposals., • Serve as a technical expert for internal and external clients., • Participate in marketing and business development initiatives.Minimum Qualifications, • BS or MS in civil, structural, geotechnical, environmental or coastal engineering, • 8 years of directly applicable marine and coastal experience, • This role will require the successful completion of fit for work testing which includes Drug & Alcohol testing Preferred Qualifications, • Professional Engineer (PE) license, • Excellent written and verbal communication skills, • Proficient in MS Office SuiteAll qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.