Geotechnical jobs in New York, New YorkCreate job alerts

Overview Remedial Construction Services, L.P. is an environmental remediation, geotechnical construction, and civil construction contractor founded in 1989. We are a national leader in environmental remediation services, including soil remediation, soil stabilization and solidification, landfill cap and cell construction, permeable reactive barriers, deep soil mixing, biopolymer trenches, slurry walls and demolition of hazardous waste sites. Construction Laborers are responsible for performing tasks involving and related to physical labor onsite for environmental remediation, civil, geotechnical and demolition construction projects. Responsibilities Observe and comply with all company and specific site safety and project policies Supply input to Job Safety Analysis (JSA) and frequent improvements or changes to the Job Safety Analysis Plan (JSAP) Dig ditches or trenches, backfill excavations, compact and level earth to grade specifications, using picks, shovels, pneumatic tampers and rakes Clean, remove and prepare materials used on site to eliminate possible hazards Control traffic passing near, in and around work zones; signal equipment operators to facilitate alignment, movement and adjustment of machinery, equipment and materials Measure, mark and record openings and distances to layout areas where construction work will be performed Observe and comply with all company and specific site safety procedures and project policies, and maintain the construction site in strict accordance with OSHA guidelines Communicate professionally and respectfully with others by all means possible (visual or radio contact) including interpreting hand signals to determine where materials are to be placed or loaded May perform a variety of manual tasks for extended periods of time, including lifting, positioning and securing materials during installation Responsible for care and custody of tools being used, including daily cleaning and maintenance May perform other miscellaneous duties as assigned Qualifications Previous experience working in construction Must be able to travel as required over extended periods of time Must be able to operate construction tools by hand Must be able to preform the duties of a labor while using different levels of PPE and respiratory equipment, when necessary. Must be able to perform the duties of a laborer while working in all outdoor weather conditions Must have the ability to read, write and understand math and English to respond to customer requests and follow instructions Ability to lift up to 50 pounds regularly, climb, operate motorized vehicles and equipment, work in confined spaces, at heights and around heavy equipment required Must be able to work in a construction environment with potential exposure to dust, noise, waste, toxic and infectious materials and in possible inclement weather Education/Experience: High School diploma or equivalent required 40-Hour HAZWOPER training required for positions at most job sites (or current 8 Hour HAZWOPER refresher course) and MSHA certification preferred Previous construction industry experience preferred Recon is an Equal Opportunity Employer. We encourage qualified women, minorities, veterans, individuals with disabilities, and others to apply. Equal Employment Opportunity

Overview Remedial Construction Services, L.P. is an environmental remediation, geotechnical construction, and civil construction contractor founded in 1989. We are a national leader in environmental remediation services, including soil remediation, soil stabilization and solidification, landfill cap and cell construction, permeable reactive barriers, deep soil mixing, biopolymer trenches, slurry walls and demolition of hazardous waste sites. The Heavy Equipment Operator I- Articulated Truck Driver will safely operate heavy construction equipment to include articulated trucks for earthwork construction projects. May include operating multiple types of heavy equipment such as fuel and water trucks, front-end loaders, track loaders, rubber tire loaders, backhoes, excavators, hoe rams, bulldozers, scrapers, compactors, or skid steers onsite to excavate, move, grade and stabilize materials in a safe and efficient manner. RECON holds safety as a core value, and the Operator I must always be focused on safe work practices. Responsibilities Observe and comply with all company and specific site safety and project policies Supply input to Job Safety Analysis (JSA) and frequent improvements or changes to Job Safety Analysis Plan (JSAP) Operate heavy construction equipment to include articulated trucks in a safe and appropriate manner to mitigate risk of injury, property damage, and the loss of life in accordance to company policies Perform daily pre-inspection of equipment to ensure it's safe and fit for duty, conduct on-going maintenance checks, and manage the daily custody of construction equipment Conduct constant surveillance of surroundings before and during the operation of all equipment to ensure safe ground and slope conditions; maintain an adequate distance between other equipment, RECON team members and structures in the immediate work area Communicate clearly using radio contact, visible verbal, and nonverbal hand signals to determine where materials should be safely placed, loaded or unloaded Work closely with the Foreman and Superintendent to perform work tasks with the highest level of quality, take direction from more senior level equipment operators on the team to ensure production remains on schedule and all construction work is performed safely May assist in lifting, positioning and securing of materials and work pieces during installation May perform a variety of manual tasks for extended periods of time Responsible for care and custody of equipment being operated, including daily cleaning and maintenance Report all equipment maintenance issues to Superintendent Perform other miscellaneous duties as assigned Qualifications Knowledgeable in OSHA regulations regarding excavation methods and practices May require the ability to read survey stakes for alignment and grading Perform the duties of equipment operator and/or laborer while using different levels of PPE and respiratory equipment, when necessary Perform duties of equipment operator and/or laborer while working in all outdoor weather conditions Must be able to travel over extended periods of time on short notice Must be able to read, write and understand math and English Required to pass skills test prior to operating equipment Must reliably show up on time to work five to seven days a week Additional Information Recon is an Equal Opportunity Employer. We encourage qualified women, minorities, veterans, individuals with disabilities, and others to apply.

Overview Remedial Construction Services, L.P. is an environmental remediation, demolition, geotechnical construction, and civil construction contractor founded in 1989. We are a national leader in environmental remediation services, including soil remediation, soil stabilization and solidification, landfill cap and cell construction, permeable reactive barriers, deep soil mixing, biopolymer trenches, slurry walls, and demolition of hazardous waste sites. Demolition Laborers are responsible for performing on-site physical labor tasks related to demolition, environmental remediation, and civil and geotechnical construction projects. Responsibilities Observe and comply with all company and specific site safety and project policies. Supply input to Job Safety Analysis (JSA) and frequent improvements or changes to the Job Safety Analysis Plan (JSAP). Interior demolition, using hand tools, Sawzall, band saw, burning torches, and pneumatic hammers. Collect and package all waste for disposal, including light bulbs, light ballasts, thermostats, electronic waste, and other universal waste, to eliminate possible hazards. Control traffic passing near, in, and around work zones; signal equipment operators to facilitate alignment, movement, and adjustment of machinery, equipment, and materials. Measure, mark, and record openings and distances to layout areas where construction work will be performed. Observe and comply with all company and specific site safety procedures and project policies, and maintain the construction site in strict accordance with OSHA guidelines. Communicate professionally and respectfully with others by all means possible (visual or radio contact), including interpreting hand signals to determine where materials are to be placed or loaded. May perform a variety of manual tasks for extended periods of time, including lifting, positioning, and securing materials during installation. Responsible for the care and custody of tools being used, including daily cleaning and maintenance. May perform other miscellaneous duties as assigned. Qualifications Previous experience working in construction and demolition Must be able to travel as required over extended periods of time Must be able to operate construction tools by hand Must be able to perform the duties of a laborer while using different levels of PPE and respiratory equipment, when necessary. Must be able to perform the duties of a laborer while working in all outdoor weather conditions Must have the ability to read, write, and understand math and English to respond to customer requests and follow instructions Ability to lift up to 50 pounds regularly, climb, operate motorized vehicles and equipment, work in confined spaces, at heights, and around heavy equipment required Must be able to work in a construction environment with potential exposure to dust, noise, waste, toxic and infectious materials, and in possible inclement weather Education/Experience: High School diploma or equivalent required 40-Hour HAZWOPER training required for positions at most job sites (or current 8 Hour HAZWOPER refresher course), and MSHA certification preferred Previous construction industry experience preferred Recon is an Equal Opportunity Employer. We encourage qualified women, minorities, veterans, individuals with disabilities, and others to apply. Equal Employment Opportunity

Overview RECON has successfully completed over 6,000 environmental remediation, geotechnical and mine reclamation projects across North America since 1989. Our team of dedicated employees, financial strength, and large fleet of equipment empower RECON to deliver world class solutions for the complex environmental problems. The Site Engineer position supports field activities and assists Project Managers and Superintendents. They assist with project planning and tracking; material tracking and pricing; and project cost reporting, typically supporting one medium to large-size project. Site Engineers learns the fundamentals of Geotechnical Construction and field technical services. This is a field/project-based leadership position that is focused on site operations. The ideal candidate will be located on the East Coast of the United States and will spend most of their time on project sites throughout the Eastern region. Responsibilities Assists in managing the project schedule, supervises Quality Control (QC) and ensures compliance with QC requirements Coordinates Third Party QC services, implements RECON’s three phase QC program and prepares Daily Production Logs Track materials; perform QC on materials ordered and received Responsible for planning, scheduling, conducting, and coordinating the technical and management aspects of projects, prepares monthly project status reports and change orders Budget monitoring and trend tracking Observes and complies with all company specific site safety programs, assists the Site Safety Officer with accident/incident investigations, finds the root cause and suggests improvements Works independently and conducts tasks with limited supervision Qualifications Bachelor’s Degree in Civil Engineering, Construction Management, or similar type degree required Four years of engineering experience or similar trade; Construction field experience preferred Experience with surveying or CAD Experience using a GPS unit to layout and check working grades Experience demonstrating progressive increase in financial/supervisory accountability and authority Excellent written and verbal communication skills Knowledge of Microsoft Office products such as Word, Excel, and Project Must be self-motivated and able to work effectively with little or no direct supervision Must possess multi-tasking skills Additional Information Salary Range: $70,000.00 - $85,000.00 per year Actual salary will be based on a variety of factors including relevant internal and external experience, knowledge, skills, scope of job, geographical location or other factors permitted by law Benefits: 401(k) + matching Health, Dental, Vision insurance Life insurance Paid time off (PTO) Holiday Pay RECON is a Keller Company and offers a variety of employee benefits including competitive compensation; medical, dental and vision insurance; company paid vacation, sick leave, company paid holidays; 401K retirement plan with 6% company match, a casual dress code and work environment, and much more. Recon is an Equal Opportunity Employer. We encourage qualified women, minorities, veterans, individuals with disabilities, and others to apply.

Location: NJ / NY Metro Area (Field-Based)AEIS Metallurgy Lab – South Plainfield, NJEmployment Type: Full-Time, ExemptWhy Join AEIS?At AEIS, we do more than inspect — we build confidence in the world around us. Our work supports infrastructure, innovation, and the future of our communities. We value craftsmanship, teamwork, and continuous improvement, and we invest in the people who share those values.Here, your career is a path — not a position. AEIS professionals grow into QA Leads, Technical Specialists, and Project Leaders who shape the future of construction quality. Learn more: Growth That MattersAEIS operates a full in-house NDT Technical Training Program covering MT, UT, Hardness testing, and more. Whether you’re building new skills or enhancing your expertise, you’ll find hands-on support, mentorship, and real career mobility.Position Overview — Professional EngineerWe’re seeking a New York/ New Jersey State Licensed Professional Engineer (PE) to serve as (Professional Engineer), P.E. on DOT and heavy civil infrastructure projects. In this leadership role, you will be responsible for developing project-specific Quality Plans, supervising QA/QC activities, and ensuring full adherence to DOT and agency requirements.What You’ll DoQuality Oversight ComplianceDevelop and implement Quality Plans per DOT and agency-specific protocolsMonitor site QA/QC activities including inspection, materials testing, and corrective actionsEnsure compliance with NYSDOT, NYCDOT, NJDOT, NYS Thruway Authority, and similar agency specificationsDocumentation ReportingPrepare inspection reports, progress logs, audit checklists, and quality documentationEnsure contractor submittals and quality procedures meet approval requirementsLead quality audits and agency-facing documentation reviewsTeam Leadership CollaborationSupervise QA/QC staff across field inspection and testing disciplinesCoordinate with client reps, construction managers, and AEIS engineersRepresent AEIS in progress meetings and quality briefingsWhat Were Looking ForMust HavesActive New York / New Jersey State Professional Engineer (PE) License (Mandatory)Minimum 7–10 years of experience in construction quality management for DOT or agency-led infrastructure projectsDirect experience with NYSDOT, NYCDOT, NJDOT, NYS Thruway Authority, or equivalent agencies30-Hour OSHA Construction Safety Training Certification (Mandatory)Strong knowledge of transportation construction codes, standards, AHJ specs and quality proceduresExcellent technical writing, communication, and leadership skillsProficiency in quality management software and digital reporting toolsBonus PointsAdditional licensure in NY/NJ (mandatory) or other statesBackground in inspection disciplines (geotechnical, concrete, asphalt, coatings, etc.)Familiarity with Primavera, HCSS, or project controls softwareSalary Range: $125K - $190K annually. This range is based on national market data and may vary widely by experience and location.Benefits401(k) with company contributionHealth, Dental Vision InsurancePaid Time Off (PTO)Family LeaveProfessional development certification supportEmployee referral bonusesParking and transit benefitsTuition reimbursementCompany sponsored discounts (Verizon)Cross-training internal mentorship opportunitiesReady to Apply?You can email us directly with your resume (PDF) to: :Professional Engineer Application – [Your Name]A member of our hiring team will follow up — including the opportunity to visit our South Plainfield Technical Lab.Equal Opportunity EmployerAEIS is an equal opportunity employer and does not discriminate with respect to any term, condition or privilege of employment based on race, color, religion, sex, sexual orientation, gender identity or expression, age, disability, military or veteran status, marital status, or status of an individual in any group or class protected by applicable federal, state, or local law.Employment AuthorizationApplicants must be authorized to work for any employer in the United States. We are unable to sponsor or take over sponsorship of an employment Visa at this time.

Position Overview: As a key member of the geotechnical design and value-engineering team, you will support subsurface investigations, foundation and excavation design, construction monitoring, and contractor support services across public and private infrastructure projects. You will collaborate closely with senior engineers, geologists, contractors and clients to ensure technically sound, cost-effective, and constructible solutions that align with project goals and regulatory requirements. Key Responsibilities: • Conduct subsurface explorations (soil borings, test pits), evaluate soil and rock mechanics, groundwater conditions, seismic risk and site suitability., • Assist in foundation engineering, support-of-excavation and retaining-structure design for commercial, industrial, retail, residential and public-sector developments., • Provide construction-phase services including QA/QC of earthwork, foundations, retaining systems, dewatering, and shoring; document field conditions and respond to contractor/agency feedback., • Bachelor’s (or Master’s) degree in Civil or Geotechnical Engineering or related discipline., • EIT (Engineer?in?Training) or ability/desire to pursue PE licensure., • Field and office experience in subsurface investigation, foundation/excavation design, and construction monitoring., • Proficiency with engineering software (e.g., AutoCAD, Microsoft Office) and strong written/verbal communication skills.

Job Description Currently we are looking for Mechanical Inspectors for immediate Building & Infrastructure Projects Location: Greater New York City Metropolitan Area (Project Location Varies) Status: Part Time as Needed Duration: Extended Client: Varies Compensation: $45hr - $55/hr Based on Certification & Experience Mechanical Inspector Role Overview The Mechanical Inspector provides specialized inspection, verification, and testing oversight for mechanical and HVAC systems on Building & Infrastructure projects throughout the Greater New York City Metropolitan Area. This role supports both Quality Control (QC) and Quality Assurance (QA) programs in accordance with 1 RCNY §101-06, Chapter 17 of the NYC Building Code, the International Building Code (IBC), and applicable Mechanical Code and Energy Code requirements, as required by each project. The Mechanical Systems Inspector is responsible for verifying that mechanical systems, equipment, and associated components are installed in strict conformance with approved design documents, shop drawings, specifications, manufacturer requirements, and code provisions. Systems may include HVAC equipment, ductwork, piping, boilers, chillers, air handling units, exhaust systems, controls, and energy-related components. This role requires maintaining an active on-site presence during installation, testing, and commissioning activities, including witnessing functional performance testing, pressure testing, system start-ups, and test-and-balance (TAB) activities. The inspector coordinates closely with contractors, construction managers, commissioning agents, testing firms, and client representatives to ensure all required inspections and tests are performed at the appropriate stages of work. The Mechanical Systems Inspector plays a critical role in ensuring system performance, code compliance, life-safety coordination, energy efficiency, and operational readiness, proactively identifying non-conforming conditions, documenting deficiencies, issuing Non-Conformance Reports (NCRs), and verifying corrective actions and re-testing. • Work responsibilities may include but are not limited to the following:, • Inspection of HVAC equipment installation, supports, and clearances, • Verification of ductwork, piping, insulation, and labelling, • Inspection of boilers, chillers, pumps, and mechanical room installations, • Verification of fire/smoke dampers and coordination with fire protection systems, • Oversight of controls, sensors, and system integration, • Work hours may include early mornings, evenings, weekends, or night shifts depending on project requirements and concrete placement schedules., • Reporting & Documentation Requires you to:, • Prepare and submit daily inspection and test reports within required timeframe., • Utilize client or company reporting platforms as require, • Maintain organized and auditable inspection records Requirements • A minimum of 3 years of experience inspecting construction work in the city of NY, varied in Size and complexity. Projects may include commercial high-rise buildings, residential towers, transportation infrastructure, utilities, institutional facilities, and public-sector construction., • Familiarity with 101-06 and Chapter 17 of the NYC building code and the International Building Code., • Holds OSHA 10 or OSHA 30 Certification taken within the last 5 years., • Well versed in all aspects of construction and QA/QC responsibilities, • Familiarity with applicable Soils & Geotechnical Systems, • Training and/or knowledge in fall protection, scaffolding and ladders, & work-zone safety, • High School Diploma or Equivalent, • Physical Abilities applicable to construction projects in the City of New York and the ability to work outdoors in varying weather conditions and navigate active construction sites, including climbing ladders, scaffolding, and walking uneven surfaces., • Currently holds certification as in one or more of the following:, • AABC Test and Balance Technician Certification, • Bachelors Degree in Mechanical Engineering (accredited institution or equivalent), • ICC Certification as a Residential Mechanical Inspector, • ICC Certification as a Commercial Mechanical Inspector, • ICC Certification as a Commercial Building Inspector, • ICC Certification as a Residential Building Inspector, • NEBB Air Balancer Certification, • NYC Licensed Class A and B Oil Burner Equipment Installer, • NYC Licensed Master Plumber In this roll you will: • Implement the quality assurance measures on varying construction projects., • Review and submit all required documentation in accordance with project specifications, • Continually monitor work-in-progress, • Issue Non-Conformance Reports (NCR) where necessary., • Conduct inspections/tests as appropriate and as required, • Coordinate all work with the General Contractor or CM, • Notify the contractor if there are deviations to the Contract documents (including Contract Design Documents), • Document all RFIs; field coordination, issues and their resolution; deficiencies; corrective action; re-tests/inspections; deviations from the Contract Documents (including Design Drawings), • Take a proactive approach to quality workmanship and work-in-progress, • Ensure components meet project specifications, • Practice safety in accordance with applicable and site-specific standards Qualified professionals will also have: • Ability to communicate with colleagues and clients of all levels, • Experience working with Microsoft Office Suite, • Ability to read and understand construction drawings & specifications, • Reliable means of transportation & valid driver’s license, • Willingness to learn, • Works well with a team and individually, • Familiarity with construction industry codes, • Mathematical Knowledge - Using mathematics to solve problems., • Installation Oversight - Installing equipment, machines, to meet specifications., • Equipment Selection Oversight - Determining tools and equipment needed to do a job., • Ability to provide inspection reports in a timely manor, • Willingness to obtain additional certifications, • Works well with a team and individually MISTRAS Group, Inc. is committed to equal employment opportunity. Employment decisions including initial hiring and all matters involving the terms and conditions of employment will be made without regard to any protected class under applicable law. If hired, the employment relationship is “At-Will,” which means that employment can be terminated at any time, and for any reason, at the option of either the Company or the employee. Please direct questions about these policies to a MISTRAS Group, Inc. Human Resources representative. By submitting & signing , I hereby understand and agree to the terms and conditions of employment as outlined above. I certify that the responses and information provided in this application (including any other supporting documentation such as a cover letter, resume, or transcript) are true and accurate to the best of my knowledge. I understand that misrepresenting or omitting information requested is cause for dismissal at any time, without notice. I hereby give the Company permission to contact schools, previous employers (unless otherwise indicated), references, and others disclosed in my application. Note to Applicants: Smoking is prohibited in all indoor areas of the Company. Employees may use designated smoking areas (if established) in accordance with applicable state and local law. Rhode Island Applicants: The Company is subject to Chapters 29-38 of Title 28 of the General Laws of Rhode Island, and is therefore covered by the state’s workers’ compensation law. Initial (if applicable): Massachusetts Applicants: I understand that it is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Initial (if applicable): Maryland Applicants: I UNDERSTAND THAT UNDER MARYLAND LAW, AN EMPLOYER MAY NOT REQUIRE OR DEMAND, AS A CONDITION OF EMPLOYMENT, PROSPECTIVE EMPLOYMENT OR CONTINUED EMPLOYMENT, THAT ANY INDIVIDUAL SUBMIT TO OR TAKE A POLYGRAPH OR SIMILAR TEST. AN EMPLOYER WHO VIOLATES THIS LAW IS GUILTY OF A MISDEMEANOR AND SUBJECT TO A FINE NOT EXCEEDING $100. Mistras Group, Inc. is an Equal Opportunity Employer/Veterans/Disabled:

Geotechnical Superintendent/ Great Benefits/ 401K Match/ Bonuses This Jobot Job is hosted by: Haley Lucas Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $90,000 - $135,000 per year A bit about us: We are currently seeking a dynamic and experienced Superintendent with a strong background in the geotechnical construction industry to join our team. The successful candidate will be responsible for overseeing all drilling operations, including solid stem, casing, down hole hammer, hollow bar, and operating drilling rigs. This role requires exceptional mechanical skills, a deep understanding of geotechnical construction, and the ability to set up drills. This is a permanent position offering a competitive salary and benefits package. Why join us? Comprehensive health insurance (medical, dental, vision, disability, life) Matching 401k Paid time off Parental leave Professional development assistance and training programs Employee referral program Opportunity to be part of a dynamic team Job Details Responsibilities: • Oversee all drilling operations to ensure they are completed in a timely and efficient manner., • Operate and maintain drilling rigs, ensuring they are in good working order and ready for use., • Manage solid stem, casing, down hole hammer, and hollow bar operations., • Implement and enforce safety standards and regulations to maintain a safe work environment., • Train and supervise staff, providing guidance and feedback to improve performance., • Collaborate with project managers and other team members to plan, coordinate, and execute construction projects., • Inspect work to ensure it meets quality standards and adheres to project specifications., • Resolve any issues or delays that may arise during the construction process., • A minimum of 5 years of experience in a superintendent or similar role within the construction industry., • Proven experience in drilling operations, including solid stem, casing, down hole hammer, and hollow bar., • Proficiency in operating drilling rigs and setting up drills., • Strong mechanical skills and a deep understanding of geotechnical construction., • Exceptional leadership and team management skills., • Strong problem-solving abilities and the ability to make decisions quickly., • Excellent communication and interpersonal skills., • A strong commitment to safety and adherence to regulations., • Ability to work under pressure and meet tight deadlines., • Physical stamina and the ability to work in a variety of weather conditions., • A degree in construction management, engineering, or a related field is preferred., • Relevant certifications may be required. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job DescriptionDescription: Report to: This project requires reporting to 102 Main Street, Port Monmouth, New Jersey 07758 every morning at 7am for field work assignment. Field work assignments are directed by USACE PM and Crawford PM. Requirements: Summary Scope: Provide field oversight professional services for USACE District on the following work areas, which include the installation of floodwalls and retaining walls, earthen levees, interior drainage features (swales, ponding areas, drainage, pipes), one pump station and outfall, generator building, road raising and utility relocation, development of permit applications and incidental related work. Essential Functions: Outside work environment consists of observing work activities such as construction installation, material storage, equipment usage, documenting progress with photos, documenting actions in QA daily report, documenting deficiencies, and compliance to codes and standards. Inside work environment consists of reviewing and commenting on contractor deliverables such as QC daily reports, schedule reports, meeting minutes, technical documents, request for information, submittal review, etc. in both hard copy or RMS computer database system. Competencies: Computer skills proficient with Microsoft Office suite of products Word, Excel, Adobe Acrobat, Scheduling software like Primavera P6, and Construction Database software like Procore, RMS, Newforma. Supervisory Responsibility: No supervisory responsibilities, works independently in the field. Reports to USACE Project Manager assigned at site and Crawford Project Manager assigned at Home Office. Work Environment: On a daily basis, the work environment requires a hard hat, eye glass protection, safety vest, gloves, and steel toed work boots for safety at all times. Long sleeve shirts worn around welding and electrical arc operations, otherwise clean short sleeve collared shirts and jeans are appropriate during field construction activities. Physical Demands: While performing professional oversight services, you will encounter uneven terrain, hills, water puddles, ruts, pitfalls, sumps, etc. during the daily walk inspections so watch for slips, trips, and falls. Prepare for heat and sun, by staying hydrated with water and wearing sunscreen lotion. No lifting over 25 lbs. Position Type/Expected Hours of Work: Works Monday – Friday, 6am to 3pm typically, minimum 8 hours per day. No overtime or weekend work is planned by the Client at this time. Travel: Yes, personal vehicle travel while onsite will be required and reimbursed at the Federal mileage rate, provided odometer backup log is acceptable. Required Education and Experience: Bachelor of Science Degree in Civil Engineer with 10+ years of experience with site/civil, geotechnical soils, structural abutments both steel and concrete reinforced. Masters degree in civil Engineer, Geotechnical, Construction Management preferred alternative. Additional Eligibility Qualifications: US Driver’s License Required, OSHA 40/30 Required, and US Passport Preferred. Must have valid personal vehicle insurance and registration every day to gain security access onsite. Work Authorization/Security Clearance: Yes, a Federal Background Security Clearance is required by USACE to obtain a Govt Common Access Card Badge and Govt usage of Secured Network. In addition, Crawford requires a Federal, State, and Local Background as part of its employment along with drug and alcohol testing. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. All employees with disabilities are encouraged to contact the Human Resources Coordinator to review and discuss the essential and nonessential functions of the job. An employee with a disability can evaluate the position in greater detail to determine if she/he may perform the essential functions of the job with or without reasonable accommodation. Crawford does not discriminate in employment on the basis of race, color, religion, sex (including pregnancy and gender identity), national origin, political affiliation, sexual orientation, marital status, disability, genetic information, age, membership in an employee organization, retaliation, parental status, military service, or other non-merit factor.

Job Description PVEDI is seeking a Staff Environmental Engineer who will work under the direction and supervision of senior staff. This position entails travel to job sites and working outside of the office setting conducting site and subsurface characterization for environmental and/or monitoring contractor's environmental activities during construction as well as some associated office-related work. This is a full-time position located in our New York City, NY office.The ideal candidate, after an appropriate duration of employment with the Firm, would be considered for advancement with additional responsibilities. Accountabilities : • Perform site reconnaissance to observe existing conditions, assess site access for subsurface explorations, and identify important site features., • Monitor subsurface exploration activities (e.g., test borings, geoprobes, and test pits) to collect soil, bedrock, groundwater, and other pertinent information for project design., • Conduct soil and groundwater sampling in accordance with applicable ASTM standards, company standard procedures, and other industry standard guidelines., • Conduct routine data collection, synthesis, and analysis using approved procedures appropriate for their discipline., • Compile, reduce, analyze, manage, and report field, instrumentation, geological, and/or environmental data using spreadsheets and other tools., • Conduct on-site monitoring/ engineering observation of contractor environmental and geotechnical related construction activities., • Use various environmental and geotechnical instrumentation and equipment during field work., • Perform historical site review and review applicable regulations, as appropriate., • Preparation of written reports, proposals, cost estimates, and other client deliverables, including Phase I and Phase II ESAs., • Assist the project management team throughout the project lifecycle, including cost estimating, scheduling, subcontracting, resource allocation, project planning, task delegation, and financial management. Minimum Skills and Requirements:, • B.S. degree in Environmental Engineering, Geology, or other related discipline. M.S. degree welcomed., • 2+ years of professional services consulting experience that includes execution of Phase I/Phase II environmental assessments, evaluation of environmental data, and presentation of technical solutions in a variety of written and oral formats., • Strong technical writing skills of regulatory submittals., • Has or will apply for initial professional certification in their core discipline, where applicable, such as EIT or FE, or FG or PG., • Excellent problem-solving skills;, • Experience with remedial design support including engineering drawing, drafting, and calculations for subsurface remediation., • Direct experience with NYSDEC Brownfield Cleanup Program and NYC Voluntary Cleanup program projects., • OSHA 40-hr. HAZWOPER and OSHA 30-hr. Construction Site Safety training required. PVEDI provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, PVEDI complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. PVEDI expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status.

Job Description Currently we are looking for Concrete Inspectors for immediate Building & Infrastructure Projects Location: Greater New York City Metropolitan Area (Project Location Varies) Status: Part Time as Needed Duration: Extended Client: Varies Compensation: $25hr - $35/hr Based on Certification & Experience Concrete Inspector Role Overview The Concrete Inspector is responsible for providing independent inspection and testing services for Building & Infrastructure projects throughout the Greater New York City Metropolitan Area. This role supports both Quality Control (QC) and Quality Assurance (QA) programs in accordance with NYC Building Code Chapter 17, 1 RCNY §101-06, and the International Building Code (IBC), as applicable to each project. Inspectors will verify that concrete materials, placement, reinforcement, curing, and associated construction activities conform to approved contract documents, design drawings, specifications, and applicable codes and standards. The position requires a strong understanding of concrete construction means and methods, inspection protocols, and regulatory requirements unique to New York City. This role involves maintaining an on-site presence during active construction operations, coordinating closely with contractors, construction managers, special inspectors, and client representatives to ensure all required inspections and tests are performed at the appropriate stages of work. Inspectors are expected to proactively identify non-conforming conditions, clearly document findings, and communicate issues in real time to minimize rework, delays, and compliance risks. The Concrete Inspector will be responsible for witnessing and documenting all required testing activities, preparing accurate daily inspection and test reports, maintaining deficiency and Non-Conformance Report (NCR) logs, and verifying corrective actions and re-inspections. This position plays a critical role in ensuring structural integrity, life safety compliance, and overall project quality. • Work responsibilities may include but are not limited to the following:, • Inspection of reinforcing steel placement, embedments, anchors, and formwork, • Observation of concrete placement, consolidation, finishing, and curing, • Sampling and testing of fresh concrete (slump, air, temperature, cylinders), • Verification of mix designs, batch tickets, and delivery times, • Observation of hot and cold weather concreting procedures, • Work hours may include early mornings, evenings, weekends, or night shifts depending on project requirements and concrete placement schedules., • Reporting & Documentation Requires you to:, • Prepare and submit daily inspection and test reports within required timeframe., • Utilize client or company reporting platforms as require, • Maintain organized and auditable inspection records Requirements • A minimum of 3 years of experience inspecting construction work in the city of NY, varied in Size and complexity. Projects may include commercial high-rise buildings, residential towers, transportation infrastructure, utilities, institutional facilities, and public-sector construction., • Familiarity with 101-06 and Chapter 17 of the NYC building code and the International Building Code., • Holds OSHA 10 or OSHA 30 Certification taken within the last 5 years., • Well versed in all aspects of construction and QA/QC responsibilities, • Familiarity with applicable Soils & Geotechnical Systems, • Training and/or knowledge in fall protection, scaffolding and ladders, & work-zone safety, • High School Diploma or Equivalent, • Physical Abilities applicable to construction projects in the City of New York and the ability to work outdoors in varying weather conditions and navigate active construction sites, including climbing ladders, scaffolding, and walking uneven surfaces., • Currently holds certification as in one or more of the following:, • ACI Level 1 Concrete Testing Technician, • ACI Certification as Concrete Construction Special Inspector (ACICCSI), • ACI Certification as an Associate Concrete Construction Special Inspector (ACI-ACCSI), • ICC Certification as Concrete Special Inspector (ICCCSI), • ICC Certification as Prestressed Concrete Special Inspector In this roll you will: • Implement the quality assurance measures on varying construction projects., • Review and submit all required documentation in accordance with project specifications, • Continually monitor work-in-progress, • Issue Non-Conformance Reports (NCR) where necessary., • Conduct inspections/tests as appropriate and as required, • Coordinate all work with the General Contractor or CM, • Notify the contractor if there are deviations to the Contract documents (including Contract Design Documents), • Document all RFIs; field coordination, issues and their resolution; deficiencies; corrective action; re-tests/inspections; deviations from the Contract Documents (including Design Drawings), • Take a proactive approach to quality workmanship and work-in-progress, • Ensure components meet project specifications, • Practice safety in accordance with applicable and site-specific standards Qualified professionals will also have: • Ability to communicate with colleagues and clients of all levels, • Experience working with Microsoft Office Suite, • Ability to read and understand construction drawings & specifications, • Reliable means of transportation & valid driver’s license, • Willingness to learn, • Works well with a team and individually, • Familiarity with construction industry codes, • Mathematical Knowledge - Using mathematics to solve problems., • Installation Oversight - Installing equipment, machines, to meet specifications., • Equipment Selection Oversight - Determining tools and equipment needed to do a job., • Ability to provide inspection reports in a timely manor, • Willingness to obtain additional certifications, • Works well with a team and individually MISTRAS Group, Inc. is committed to equal employment opportunity. Employment decisions including initial hiring and all matters involving the terms and conditions of employment will be made without regard to any protected class under applicable law. If hired, the employment relationship is “At-Will,” which means that employment can be terminated at any time, and for any reason, at the option of either the Company or the employee. Please direct questions about these policies to a MISTRAS Group, Inc. Human Resources representative. By submitting & signing , I hereby understand and agree to the terms and conditions of employment as outlined above. I certify that the responses and information provided in this application (including any other supporting documentation such as a cover letter, resume, or transcript) are true and accurate to the best of my knowledge. I understand that misrepresenting or omitting information requested is cause for dismissal at any time, without notice. I hereby give the Company permission to contact schools, previous employers (unless otherwise indicated), references, and others disclosed in my application. Note to Applicants: Smoking is prohibited in all indoor areas of the Company. Employees may use designated smoking areas (if established) in accordance with applicable state and local law. Rhode Island Applicants: The Company is subject to Chapters 29-38 of Title 28 of the General Laws of Rhode Island, and is therefore covered by the state’s workers’ compensation law. Initial (if applicable): Massachusetts Applicants: I understand that it is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Initial (if applicable): Maryland Applicants: I UNDERSTAND THAT UNDER MARYLAND LAW, AN EMPLOYER MAY NOT REQUIRE OR DEMAND, AS A CONDITION OF EMPLOYMENT, PROSPECTIVE EMPLOYMENT OR CONTINUED EMPLOYMENT, THAT ANY INDIVIDUAL SUBMIT TO OR TAKE A POLYGRAPH OR SIMILAR TEST. AN EMPLOYER WHO VIOLATES THIS LAW IS GUILTY OF A MISDEMEANOR AND SUBJECT TO A FINE NOT EXCEEDING $100. Mistras Group, Inc. is an Equal Opportunity Employer/Veterans/Disabled:

Job DescriptionThe individual will work on a variety of consulting projects related to geotechnical analysis and design. Applicants must be able to work in locations that feature rough terrain typical of construction sites. The primary responsibilities of this role are to provide support to project managers and perform duties as field representative. Typical assignments include carrying out subsurface explorations, performing field tests and collection field data and samples, monitoring constructions sites, compiling data and preparing reports. Requirements: • Bachelor's degree in civil engineering with heavy emphasis on geotechnical engineering coursework (master's in civil engineering/geotechnical engineering preferred)., • 0-2 years of practical geotechnical engineering experience (internship considered)., • E.I.T preferred., • Strong knowledge of Microsoft Office software (Word, Excel, and Outlook)., • Working knowledge of common geotechnical engineering software tools., • Ability to become proficient at using firm's field-testing equipment, including nuclear gauge, and other equipment., • Ability to prepare accurate daily field and boring logs as well as other types of reports and meet required deadlines for completion., • Excellent verbal and written communication skills., • A flexible working style and an ability to work independently and with teams., • Strong analytical and judgment capabilities., • Willingness/ability to travel., • Own Transportation/Valid Driver's License., • Field and Office assignments, as required.We offer employees competitive compensation packages, medical/dental/vision, life insurance, short, and long-term disability, paid holidays, paid time off, and 401k retirement plan with company match. YU & Associates' is an Equal Employment Opportunity employer fully committed to providing equal opportunity in all areas of employment practices. No employee or applicant for employment is discriminated against because of race, creed, color, religion, gender, gender identity or expression, sexual or affectional preference, sexual orientation, sex, ancestry or national origin, citizenship status, age, disability, marital or domestic status, veteran status, atypical hereditary cellular or blood trait, genetic information or testing, or any other legally protected category in all employment decisions. We foster a work environment that’s inclusive as well as diverse, where our employees can be themselves. Every idea and perspective are valued to meet our common goals. YU & Associates is committed to supporting our employees’ well-being by providing benefits that are a valuable part of the compensation package. We partner with our employees to foster a healthy, safe and rewarding lifestyle both at work and at home. The Y&A benefits program for full-time employees include: · Benefits: • Medical-National plan with low out of pocket costs to members., • Dental-National plan., • Vision-National plan with the largest vision network., • Life/AD&D-Benefit available should an employee pass away while employed., • Short-Term Disability-Benefit in the event an employee is unable to work for a short period of time., • Long Term Disability-Benefit in the event an employee is unable to work for an extended period., • Employee Assistance Program-Employee 3rd party support available when needed., • ADP Retirement Plan with company match., • Bonus Program – based on individual and company performance., • Yearly review – based on individual and company performance.Tax Savings Tools:, • Healthcare Reimbursement Accounts-Tax Free benefit to employees., • Flexible Spending Accounts-Tax Deductible benefit for employees., • Dependent Care and Commuter Program-Tax Deductible benefit for employees.Value Adds:, • Will Preparation Powered by JazzHR 8H5JE1nLy3

Job DescriptionDescription: KS Engineers, P.C. (KSE) is a mid-size engineering and construction management firm ranking in the ENR Top 500 for design and ENR Top 100 for construction management. We are headquartered in Newark, NJ, with regional offices in New York City and Newburgh, NY; Philadelphia and Pittsburgh, PA; Mount Laurel and Mount Arlington, NJ; and Rocky Hill, CT. The firm provides engineering, construction management, and land surveying services to both public and private sector clients. KSE offers a full range of employee benefits, including medical, dental and vision insurances, a 401(k) plan, paid time off, Flexible Spending Accounts (FSAs), long- and short-term disabilities, and term life insurance. KS Engineers, P.C. is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Position: Senior Inspector – NJ DCA Reports to: Department Manager and/or Project Manager General Qualities: • Qualified NJ DCA Certified Special Inspector to support inspection services on construction projects throughout New Jersey., • This role is responsible for ensuring that all work complies with applicable codes, standards, and project specifications, while maintaining the highest levels of safety and quality., • 3–9 years of relevant inspection experience Technical Duties & Responsibilities: • Perform field inspections in accordance with NJ DCA regulations, project specifications, and applicable building codes, • Inspect construction activities including structural steel, welding, concrete, masonry, and fireproofing, • Verify compliance with approved plans, submittals, and contract documents, • Identify and report non-conforming work and coordinate corrective actions, • Prepare and submit detailed daily inspection reports and documentation, • Coordinate with contractors, engineers, and project stakeholders to ensure quality and compliance, • Bachelor’s degree in civil, Structural, or Geotechnical Engineering (preferred), • Structural Welding, • Structural Steel & Bolting, • Reinforced Concrete, • Structural Masonry, • Spray-Applied Fireproofing, • NJ DCA Special Inspector – Concrete Placement, • NJ DCA Special Inspector – Prestressed Concrete, • NJ DCA Special Inspector – Soils, • Nuclear Gauge Safety Certification (U.S. Department of Transportation), • OSHA 30 Certification Physical Requirement: • Ability to pass a physical exam for full mobility, • Capable of lifting and/or moving up to 50lbs carrying, and transporting equipment, samples, and materials, • Comfortable navigating active construction sites, including ladders, scaffolding, and uneven terrain, • Willingness to work in varying site conditions and project environments KS Engineers, P.C. is an EOE/AA/VEV/Disabled Employer. KSE will not discriminate based on race, color, religion, creed, sex, national origin, marital status, age, disability, veteran status, citizenship status, or other status protected by law.

Job Description At Brightcore Energy, we specialize in turn-key solutions that simplify the clean energy journey for large commercial and industrial clients. Whether it's cutting-edge geothermal systems, solar, energy storage, or smart building technologies, we bring expertise, innovation, and a seamless approach to every phase of a project – from planning and design to implementation and ongoing support – thereby streamlining project timelines, reducing costs, and eliminating scope gaps. Summary/Primary Role: This role is responsible for preparing accurate and competitive cost estimates for geothermal and mechanical construction projects. This role analyzes drawings, specifications, and subsurface data to develop detailed pricing for ground source heat pump systems, piping, drilling coordination, and associated mechanical scopes. The estimator works closely with preconstruction, engineering, and operations teams to support successful project pursuit and execution. Principal Duties & Responsibilities: (Management may amend or assign duties and responsibilities to this job at any time) • Prepare detailed cost estimates for mechanical systems, including labor, materials, equipment, and subcontracted work., • Analyze blueprints, specifications, and scopes of work to develop accurate cost estimates for labor, materials, equipment, and subcontractors related to mechanical systems, including HVAC, plumbing, and piping, in support of geothermal and energy infrastructure projects., • Coordinate pricing and scope alignment with mechanical, electrical, and plumbing (MEP) contractors, specialty vendors, and suppliers., • Participate in pre-bid meetings, site walks, and subcontractor audits as needed. Estimated travel requirement: up to 25%., • Ideally has strong HVAC, plumbing, or piping backgrounds with the ability to provide support to onboard into geothermal-related work., • Thorough knowledge of piping, plumbing and mechanical system operations., • Estimating, budget, cost control, scheduling, and management of multiple bids., • Solid understanding of wide variety of HVAC equipment and materials., • Review construction drawings, specifications, geotechnical reports, and RFP/RFQ documents., • Perform quantity takeoffs for piping, heat pumps, mechanical equipment, and related components., • Analyze historical cost data and market conditions to ensure competitive pricing., • Participate in pre-bid meetings, site visits, and scope reviews., • Identify risks, value engineering opportunities, and constructability considerations., • Collaborate with project managers and engineers to ensure smooth handoff from estimate to execution., • Maintain estimating databases, templates, and cost libraries., • Assist with post-bid reviews and cost variance analysis., • Bachelor's degree in Mechanical Engineering, Construction Management, or related field (or equivalent experience)., • 3–7+ years of mechanical estimating experience, preferably in geothermal or HVAC., • Strong understanding of mechanical systems, piping, and HVAC equipment., • Ability to read and interpret construction drawings and specifications., • Proficiency in estimating software, CAD drawings and Microsoft Excel., • Strong analytical, organizational, and communication skills. This position does not have supervisory responsibility. Expected Hours of Work: An Employee is expected to work a minimum of forty (40) hours per week. Non-exempt employees are eligible for overtime pay in accordance with applicable wage and hour laws, while exempt employees may be required to work additional hours as necessary to fulfill their job responsibilities. Overtime requirements will be determined based on the operational needs of the organization. The salary range and/or hourly rate listed is a good faith determination of potential base compensation that may be offered to a successful applicant for this position at the time of this job advertisement and may be modified in the future. When determining an employee's base salary and/or rate, several factors may be considered as applicable (e.g., location, specialty, years of relevant experience, education, credentials, and internal equity). Brightcore also offers a comprehensive set of benefits to compliment the base salary. The base annual salary range for this position is $100,000-$130,000 and is eligible for an annual performance-based bonus. Travel Requirements: • Travel required up to 75% to work/project sites in the greater Northeast Region (but not limited to) of the United States., • Work site setting. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Brightcore Energy is committed to a safe workplace free of drugs and alcohol. All Brightcore Energy positions require a pre-employment background check that includes prior employment verifications, a criminal history check, and a pre-employment drug screen. In accordance with DOT regulations (49 CFR § 40.25), Brightcore Energy is required to obtain prior drug and alcohol testing records for applicants/employees intending to perform safety-sensitive duties for covered Department of Transportation positions. If an applicant/employee refuses to provide written consent for Brightcore Energy to obtain these records, the individual will not be permitted to perform safety-sensitive functions. Office/Remote/Field Work: We offer a variety of structured work arrangements, including remote, hybrid, and field-based assignments, aligned with organizational needs and role-specific requirements. Work arrangements are role-dependent, with guidelines established based on position requirements and business needs. This policy is subject to change at Brightcore's discretion. Brightcore Health Benefits Overview: Brightcore offers a full slate of medical, dental, and vision benefits including options to enroll in a Flexible Spending Account (FSA) and a Health Savings Account (HSA). 401k Plan: Brightcore currently offers both traditional and Roth 401k plans with a dollar-for-dollar match of up to 3% of contributions and $0.50 on the next 2% for a total potential match of 4% annually. Other Benefits & Perks: • PTO, • Financial Wellness Benefits, • Benefit Concierge Program through Health Advocate, • EAP - Employee Assistance Program, • Disability, Life, & AD&D Benefits Brightcore Energy is an Equal Opportunity Employer, providing equal employment and advancement opportunities to all individuals. We recruit, hire and promote into all job levels the most qualified applicants without regard to race, color, creed, national origin, religion, sex (including pregnancy), parental status, age, disability, genetic information, citizenship status, veteran status, gender identity or expression, transgender status, sexual orientation, marital, family or partnership status, political affiliation or activities, military service, domestic violence victim status, sexual or reproductive health decisions, caregiver status, traits historically associated with race, including but not limited to hair texture and protective hairstyles or any other status protected under applicable federal, state and local laws. Brightcore Energy is committed to providing equal employment opportunities to all aspects of employment, including job assignment and compensation. We respect the laws enforced by the EEOC and are dedicated to going above and beyond in fostering diversity across our company. This job description provides a general overview of the expectations and basic duties of the job and is not a comprehensive list of all duties and responsibilities. Brightcore Energy will assign additional duties and tasks that it deems necessary to meet the requirements of the position. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job DescriptionSalary: $63,000 - 91,500 Annual Base Salary DOE About mcfa: We are a professional services firm in the Architecture/Engineering/Construction (AEC) industry serving public and private sector clients in the Mid-Atlantic region. Our services include Strategy, Planning, Program Management & Construction Management. Our goal is to help every employee design a fulfilling career through alignment of their individual passions/skills with the vision of the organization. Our mission is "Inspiring People and Places through Project Leadership and Project Development." How you'll get to contribute: We are seeking a dedicated and skilled Construction Inspector for soil testing inspections and future road and bridge inspection projects. Our ideal candidate will be a highly motivated & qualified individual, with experience in quality assurance and quality control testing of materials related to soils and aggregates in the field. Candidate should have a solid understanding of civil engineering principles with a geotechnical focus, and a desire to work on multi-disciplinary projects. In this role, you will be responsible for overseeing and inspecting various highway and/or bridge construction projects across New Jersey, ensuring that all work is completed in accordance with established standards, specifications, and regulations. This role will also involve office engineer duties as outlined below. Work schedule varies according to job assignments and/or contractors' schedule, to include night work, weekends, and holidays. This job requires travel to various job sites. What you'll do: • Material quality services are completed through field operations in all the major material disciplines as directed (soils, aggregate, metals, structures, asphalt, concrete coatings, and paints)., • Observe field work to ensure workmanship and materials meet standards., • Inspect soil boring operations -- roadway borings, retaining wall borings, bridge borings., • Soil identification., • Prepare field boring logs in accordance with NJ Turnpike procedures., • Install wells and record monitoring well data., • Enter data for Test calculations., • Maintain project records., • Ability to document daily inspections and various other reports., • Provide daily inspections of highway and/or bridge construction projects and inspect related work materials to ensure compliance with design specifications, safety standards, and state regulations., • Prepare detailed reports on inspection findings, including recommendations for corrective actions when necessary., • Monitor and document the progress of construction activities, identifying any deviations from the planned schedule or specifications., • Communicate with prime and other subcontractors., • Coordinate with project team members, engineers, and contractors to address and resolve any issues that arise during construction., • Ensure that the contracted drilling firm carries out its work in accordance with contract specification., • Review and interpret construction plans, blueprints, and specifications to ensure accurate implementation on-site., • Assist in the development and implementation of quality control procedures., • Attend meetings and conferences as needed., • Travel to various project sites. Who you are: • Bachelor's degree in Civil Engineering, Construction Engineering, Geological Engineering, Structural Engineering, or related field., • Familiar with ASTM and AASHTO standards for testing and inspections., • Strong knowledge of construction methods, materials, and legal regulations., • Excellent communication and interpersonal skills., • Ability to read and interpret engineering drawings and specifications., • Proficient in Microsoft Office and project/construction management software., • Valid driver's license, consistent means of transportation to/from project sites, and willingness to travel to various project sites within New Jersey., • 2+ years of experience in construction inspection, with a focus on transportation infrastructure projects and/or soil testing., • Familiarity with Bentley gINT software., • Certifications/Trainings, • OSHA 30, • American Concrete Institute (ACI) - Soil Inspector, Concrete, • International Code Council (ICC) - Soil Inspector, Masonry steel, Bolting, Welding, Post installed anchors, • TR1 Special Inspections, • New Jersey DCA Certified, • NICET I certification in Highway Construction Inspection or Construction Materials Testing Soils., • Professional Engineer (P.E.) license., • NJSAT and TCC/TCP Certifications. What's in it for you: Annual Paid Time Off: • Sick Leave: 5 Days (40 Hours), • Vacation: 15 Days (120 Hours), • Following your first full quarter worked, you will qualify for a profit-share bonus that is distributed at the end of each quarter if company targets are hit., • Incoming Growth Units: 10, • Eligible to participate in mcfa's family medical, dental and vision coverage; plan access begins on the first day of employment., • mcfa contributes up to 75% shared cost, not to exceed $700 per month., • Company paid life insurance plan (up to $100,000 per employee)., • You are eligible to participate in Company retirement plan (401k) on first day of employment with mcfa. mcfa Core Values (LEADS): • Love (each other, mission, work), • Entrepreneurial (spirit of innovation), • Accountability (to ourselves, our clients, each other), • Delight (customers and teammates), • Stretch (individual and collective growth mindset) mcfa is an Equal Employment Opportunity Employer. mcfa does not discriminate against any applicant or employee with regard to hiring, tenure of employment, promotion, transfer, selection for training, or any other terms or conditions of employment because of race, color, religion, sex, age, sexual orientation, disability, gender identity or national origin, status as a Vietnam-era or special disabled veteran in accordance with applicable federal law, or on any ground protected by state or local law in each area in which mcfa maintains facilities. #ZR Company DescriptionCompany Overview: We are an entrepreneurial firm focused on strategic planning, project development, program management, and construction management. We are a dedicated team of professionals, committed to delivering innovative solutions to our clients by inspiring people and places. We believe that our approach to grow, empower, and deploy Project Leadership is our differentiator in the client and talent marketplace. We have been steadily growing and establishing ourselves as an entrepreneurial leader in the industry. As we continue to expand, we are seeking a highly capable and experienced Director of Construction Management to join our senior leadership team and play a crucial role in directing our construction project and program success. Our core values drive how we hire, fire, train, incentivize and reward. They steer our company’s growth and serve as the common ground we seek in professional relationships with our clients and team members. mcfa core values: Extreme Ownership, Intentional Creativity, Fun, Teamwork, White-Glove Customer Experience, Growth-focused, Entrepreneurial Spirit.Company Overview: We are an entrepreneurial firm focused on strategic planning, project development, program management, and construction management. We are a dedicated team of professionals, committed to delivering innovative solutions to our clients by inspiring people and places. We believe that our approach to grow, empower, and deploy Project Leadership is our differentiator in the client and talent marketplace. We have been steadily growing and establishing ourselves as an entrepreneurial leader in the industry. As we continue to expand, we are seeking a highly capable and experienced Director of Construction Management to join our senior leadership team and play a crucial role in directing our construction project and program success. \r\n\r\nOur core values drive how we hire, fire, train, incentivize and reward. They steer our company’s growth and serve as the common ground we seek in professional relationships with our clients and team members. mcfa core values: Extreme Ownership, Intentional Creativity, Fun, Teamwork, White-Glove Customer Experience, Growth-focused, Entrepreneurial Spirit.

Job Description The MTA’s Second Avenue Subway project is a $7.7B expansion that will extend the Q Line from 96th Street into East Harlem, adding three new ADA-accessible stations at 106th, 116th, and 125th Streets. This long-awaited project will restore rapid transit access to a community underserved for decades, ease overcrowding on the Lexington Avenue line, and cut commute times—delivering a transformative impact for East Harlem residents and the city as a whole. This position will support the $2B design-build contract for Phase 2 that includes two tunnels that will allow the development of two new subway stations in New York. Led by Connect Plus Partners, a joint venture between FCC Construction and Halmar International, the project brings together extensive experience in large-scale infrastructure, complex tunneling, and urban transit construction. POSITION SUMMARY The Construction Quality Engineer (CQE) is responsible for implementation of the Quality Plan and oversight of all quality issues, ensuring that all aspects of the tunnel meet the required contractual, technical, quality and regulatory standards focusing on quality assurance and control throughout the construction process. He must ensure compliance with the Construction Quality Management Plan (CQMP), Inspection and Test Plans (ITPs), released-for-construction (RFC) drawings and applicable standards. This position must operate independently from production and supervision teams to maintain objectivity and integrity in quality program processes. RESPONSIBILITIES • Develop and implement quality assurance plans ensuring that all construction activities comply with project specifications and standards. This includes preparing method statements, inspection and test plans, and quality management policies and procedures., • Evaluate and document the quality of tunnel construction performed by the construction team, suppliers, and/or subcontractors, ensuring compliance with project requirements, RFC and As-Built drawings, and specifications., • Review and assess the quality of material used in construction, ensuring they meet the required specifications. This involves conducting inspections and tests on materials before they are used on-site., • Maintain comprehensive QA/QC documentation, including certificates, calibration records, test results and non-compliance reports. Ensure that all documentation is accurate and readily available for audits and inspections., • Verify that equipment used in the construction process is fit for purposes, properly calibrated, and maintained as required., • Identify and report non-compliant construction work or supplied products upon discovery and monitor the disposition of non-conformances., • Control the further processing, delivery, installation, or use of non-compliant construction work or supplied products until the issues are corrected, controlled, or removed., • Coordinate and notify all quality activities as indicated in the ITPs with Quality team, and other relevant parties, including contracting authorities, utilities, and governmental authorities., • Coordinate with subcontractors and the client and ensure ITP Witness/Hold points implementation as per contract and technical specification requirements., • Ensure that inspections and tests are performed according to approved ITPs, and that all quality records and documents are complete, accurate, and meet applicable requirements., • Review test packages and relevant documentation prior to conducting inspections and testing., • Works closely with construction teams, project managers and subcontractors to ensure quality standards are met. This includes providing feedback and guidance on quality-related issues and facilitating training in the quality management system., • Perform regular audits and inspections to monitor compliance with quality standards and identify areas for improvement. Generate reports on quality trends and non-conformances issues, proposing corrective actions as necessary., • Organize quality toolbox talks and lessons learned and maintain documentation of such. Prepare and maintain quality records related to their assigned portion of work., • Perform other duties as requested by the Construction Quality Manager and the project’s Quality Manager. EDUCATION AND QUALIFICATIONS • Degree in civil engineering, construction management, geotechnical engineering or similar industry., • A minimum of 15 years of experience in heavy civil projects, tunnel, transit, infrastructure or similar projects in scale and complexity., • Demonstrated relevant experience in full-time Quality Assurance and/or Quality Control management and with design-build contracts., • Current certification in Quality Management from the American Society for Quality (ASQ) or the American Society of Civil Engineers or equivalent experience or education is preferable., • Certification and/or training in quality control inspection and testing, particularly in transit construction projects., • Certification and/or documented training in construction quality assurance and quality control., • Familiarity with ISO 9001:2015 principles in quality systems and quality program implementation. WORK ENVIRONMENT • Work is primarily performed at active construction sites, including underground and surface environments., • Must be able to stand, walk, and climb for extended periods; navigate uneven ground, scaffolding, and ladders; and work around heavy equipment., • Exposure to noise, dust, vibration, confined spaces, and varying weather conditions is common., • Requires regular use of personal protective equipment (PPE), including hard hats, safety boots, high-visibility clothing, and eye/ear protection., • Ability to perform site inspections, monitor field activities, and respond quickly to safety or operational issues in physically demanding conditions., • Flexibility to work extended hours, nights, weekends, and rotating shifts as project demands require., • Occasional office-based work is required for reviewing documents, preparing reports, and coordinating with project management teams. FCC is dedicated to creating an inclusive workplace where diversity is valued and respected. As an Affirmative Action/Equal Opportunity Employer, we do not discriminate against any applicant for employment or employee because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, genetics, creed, veteran status, military status, or any other characteristic protected under Federal, State, or local laws. Reasonable accommodations will be provided to qualified individuals with disabilities in accordance with applicable law. If you need a reasonable accommodation during the interview process, please contact our HR team.

Job Description Currently we are looking for Professional Engineer Field Inspectors for immediate Building & Infrastructure Projects Location: Greater New York City Metropolitan Area (Project Location Varies) Status: Part Time as Needed Duration: Extended Client: Varies Compensation: $55hr - $70/hr Based on Certification & Experience Professional Engineer Field Inspector Role Overview The Professional Engineer (PE) Field Inspector provides advanced inspection, verification, and technical oversight services for Building & Infrastructure projects throughout the Greater New York City Metropolitan Area. This role supports both Quality Control (QC) and Quality Assurance (QA) programs in accordance with 1 RCNY §101-06, Chapter 17 of the NYC Building Code, and the International Building Code (IBC), as applicable to each project. This position is responsible for verifying that construction activities, materials, installations, and systems conform to approved design documents, specifications, code requirements, and project standards. The PE Field Inspector serves as a senior technical presence on site, providing engineering judgment where required and supporting compliance-driven decision-making on complex or high-risk work elements. The role requires maintaining an active on-site presence during construction operations, witnessing required inspections and testing, and coordinating closely with contractors, construction managers, special inspectors, laboratories, and client representatives. The PE Field Inspector is expected to proactively identify deviations from contract documents, document non-conforming work, issue Non-Conformance Reports (NCRs) as necessary, and verify the implementation and effectiveness of corrective actions. This position plays a critical role in ensuring structural integrity, life-safety compliance, constructability alignment, and regulatory adherence, particularly on projects involving complex systems, specialty construction, or heightened oversight requirements. • Work responsibilities may include but are not limited to the following:, • Review and verification of complex or delegated design elements, • Oversight of specialty inspections and testing programs, • Engineering evaluation of non-conforming work and proposed corrective actions, • Field verification of structural, civil, MEP, and specialty systems, • Coordination with design engineers for field clarifications and RFIs, • Work hours may include early mornings, evenings, weekends, or night shifts depending on project requirements and concrete placement schedules., • Reporting & Documentation Requires you to:, • Prepare and submit daily inspection and test reports within required timeframe., • Utilize client or company reporting platforms as require, • Maintain organized and auditable inspection records Requirements • A minimum of 3 years of experience inspecting construction work in the city of NY, varied in Size and complexity. Projects may include commercial high-rise buildings, residential towers, transportation infrastructure, utilities, institutional facilities, and public-sector construction., • Familiarity with 101-06 and Chapter 17 of the NYC building code and the International Building Code., • Holds OSHA 10 or OSHA 30 Certification taken within the last 5 years., • Well versed in all aspects of construction and QA/QC responsibilities, • Familiarity with applicable Soils & Geotechnical Systems, • Training and/or knowledge in fall protection, scaffolding and ladders, & work-zone safety, • High School Diploma or Equivalent, • Physical Abilities applicable to construction projects in the City of New York and the ability to work outdoors in varying weather conditions and navigate active construction sites, including climbing ladders, scaffolding, and walking uneven surfaces., • Currently holds certification as in one of the following: § Structural § Civil § Marine § Mechanical § Electrical § Fire Protection In this roll you will: • Implement the quality assurance measures on varying construction projects., • Review and submit all required documentation in accordance with project specifications, • Continually monitor work-in-progress, • Issue Non-Conformance Reports (NCR) where necessary., • Conduct inspections/tests as appropriate and as required, • Coordinate all work with the General Contractor or CM, • Notify the contractor if there are deviations to the Contract documents (including Contract Design Documents), • Document all RFIs; field coordination, issues and their resolution; deficiencies; corrective action; re-tests/inspections; deviations from the Contract Documents (including Design Drawings), • Take a proactive approach to quality workmanship and work-in-progress, • Ensure components meet project specifications, • Practice safety in accordance with applicable and site-specific standards Qualified professionals will also have: • Ability to communicate with colleagues and clients of all levels, • Experience working with Microsoft Office Suite, • Ability to read and understand construction drawings & specifications, • Reliable means of transportation & valid driver’s license, • Willingness to learn, • Works well with a team and individually, • Familiarity with construction industry codes, • Mathematical Knowledge - Using mathematics to solve problems., • Installation Oversight - Installing equipment, machines, to meet specifications., • Equipment Selection Oversight - Determining tools and equipment needed to do a job., • Ability to provide inspection reports in a timely manor, • Willingness to obtain additional certifications, • Works well with a team and individually MISTRAS Group, Inc. is committed to equal employment opportunity. Employment decisions including initial hiring and all matters involving the terms and conditions of employment will be made without regard to any protected class under applicable law. If hired, the employment relationship is “At-Will,” which means that employment can be terminated at any time, and for any reason, at the option of either the Company or the employee. Please direct questions about these policies to a MISTRAS Group, Inc. Human Resources representative. By submitting & signing , I hereby understand and agree to the terms and conditions of employment as outlined above. I certify that the responses and information provided in this application (including any other supporting documentation such as a cover letter, resume, or transcript) are true and accurate to the best of my knowledge. I understand that misrepresenting or omitting information requested is cause for dismissal at any time, without notice. I hereby give the Company permission to contact schools, previous employers (unless otherwise indicated), references, and others disclosed in my application. Note to Applicants: Smoking is prohibited in all indoor areas of the Company. Employees may use designated smoking areas (if established) in accordance with applicable state and local law. Rhode Island Applicants: The Company is subject to Chapters 29-38 of Title 28 of the General Laws of Rhode Island, and is therefore covered by the state’s workers’ compensation law. Initial (if applicable): Massachusetts Applicants: I understand that it is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Initial (if applicable): Maryland Applicants: I UNDERSTAND THAT UNDER MARYLAND LAW, AN EMPLOYER MAY NOT REQUIRE OR DEMAND, AS A CONDITION OF EMPLOYMENT, PROSPECTIVE EMPLOYMENT OR CONTINUED EMPLOYMENT, THAT ANY INDIVIDUAL SUBMIT TO OR TAKE A POLYGRAPH OR SIMILAR TEST. AN EMPLOYER WHO VIOLATES THIS LAW IS GUILTY OF A MISDEMEANOR AND SUBJECT TO A FINE NOT EXCEEDING $100. Mistras Group, Inc. is an Equal Opportunity Employer/Veterans/Disabled:

Job DescriptionMatrix New World Engineering, a part of True Environmental and its partner firms, have united their strengths to establish the nation's premier environmental and engineering services consulting firm. This powerhouse organization offers an extensive range of services aimed at revolutionizing the built environment and preserving the natural one. Its diverse expertise encompasses environmental remediation, urban planning, engineering iconic coastal and marine structures, developing sustainable energy sources, and pioneering resource extraction methods. Explore further at and True-Environmental.com to discover the full scope of our capabilities. Matrix New World is currently seeking a Marine and Coastal Engineer for the New York/New Jersey metro area. Matrix is a growing full-service environmental services and engineering firm offering unmatched expertise in delivering some of the nation's most exciting and complex infrastructure, resiliency, and sustainability projects, including such projects as FiDi Coastal Resiliency, Blue Highways, and Bush Terminal Pier 6 Redevelopment. As an Associate Engineer, you will be responsible for performing the inspection, design, and/or analysis of marine and coastal structures. You will perform engineering calculations, prepare contract drawings, specifications, and permitting applications. Base Annual Salary Range: $70,000 - $90,000 What you'll do: • Perform inspection, design, rehabilitation, permitting, and/or construction oversight for bulkheads, piers, marine terminals, fendering and mooring systems, ferry landings, living shorelines, stone revetments, and other port-related infrastructure., • Prepare engineering deliverables including contract drawings, specifications, 3D models, cost estimates, permit applications, inspection reports, calculation packages, and operations manuals., • Perform structural, coastal, and geotechnical engineering design of concrete, steel, timber and masonry structures using applicable codes and standards under the supervision of a professional engineer., • Perform above water and underwater survey/imaging/mapping of berths and marine structures., • Perform above water inspection of marine structures.Minimum Qualifications:, • BS in civil, structural, geotechnical, or coastal engineering, • Excellent written and verbal communication skills, • 0 to 2 years of structural, coastal or geotechnical engineering experience.Preferred Qualifications, • MS in civil, structural, geotechnical, or coastal engineeringAll qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

Job DescriptionSalary: $45-$60/hour Job Title: Civil Engineer Position Summary Pay Rate - $45-$60/hour Adidev is seeking a motivated and detail-oriented Civil Engineer to plan, design, and oversee a wide range of infrastructure and civil works projects including transportation systems, bridges, buildings, site development, utilities, and water/wastewater facilities. This role blends office-based design and analysis with hands-on field oversight, offering the opportunity to see projects through from concept to completion while ensuring quality, safety, sustainability, and regulatory compliance. You will collaborate with multidisciplinary engineering teams, public agencies, and contractors to deliver reliable infrastructure that serves communities and supports long-term growth. About Adidev Adidev Technologies is an engineering and professional services firm supporting infrastructure, construction, public works, and information technology projects across the United States. We hire and support both Civil Engineering and IT professionals, including Mobile Developers and Machine Learning Engineers, and partner with municipalities, transportation authorities, utilities, and leading private-sector organizations to deliver high-quality, practical solutions. Our teams have supported projects and initiatives for public agencies and industry leaders, including state Departments of Transportation (DOTs), municipal public works agencies, and technology-driven organizations such as Delta, Google, Apple, Spotify, US Bank, and FedEx, as well as major engineering and construction firms. Adidev delivers innovative, data-driven solutions that modernize infrastructure, improve efficiency, and strengthen the communities our clients serve. We focus on practical, field-tested solutions and pride ourselves on collaboration, technical excellence, and delivering projects that make a measurable impact. Key Responsibilities -Review survey reports, maps, plans, and technical data to support infrastructure design -Perform engineering calculations (structural, geotechnical, hydraulic, and transportation) -Prepare drawings, plans, and specifications using CAD/BIM and engineering tools -Develop cost estimates, schedules, and project budgets -Obtain permits and ensure compliance with federal, state, and local regulations -Conduct site visits to monitor construction progress and ensure adherence to design specifications -Coordinate with contractors, inspectors, agencies, and stakeholders -Identify risks, resolve field issues, and recommend engineering improvements -Maintain documentation including reports, design changes, and inspections -Support projects from concept development through construction and closeout -Pursue and/or maintain professional licensure (PE preferred) Qualifications / Skills -Bachelors degree in Civil Engineering or related field (Masters preferred for some roles) -Strong foundation in one or more disciplines: structural, transportation, geotechnical, water resources, or environmental engineering -Proficiency with AutoCAD, Civil 3D, BIM, or similar engineering software -Understanding of codes, standards, permitting processes, and regulatory requirements -Strong analytical and problem-solving abilities -Effective written and verbal communication skills -Comfortable working both in office and field environments -Project coordination, budgeting, and scheduling experience -Interest in sustainable, resilient, and community-focused infrastructure design -EIT or PE licensure (preferred or in progress) Working Conditions -Combination of office and field work -Site visits and outdoor work required -Full-time schedule with occasional extended hours based on project needs -Travel or relocation may be required depending on assignments -Perks and Benefits -Competitive salary based on experience and market value -Paid relocation assistance -Flexible and hybrid work options when project schedules allow -Professional development and continuing education support -Licensing and certification reimbursement -Regular performance and salary reviews -Opportunity to work on meaningful infrastructure projects that directly impact communities Ready to Build the Future? If youre passionate about designing and delivering infrastructure that improves everyday life, wed love to hear from you. Submit your resume along with examples of projects youre proud of. Join Adidev and help shape stronger, smarter communities through engineering excellence.

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Directs, coordinates, and exercises functional authority for planning, organization, control, integration, and completion of engineering projects within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. Works collaboratively with Principal and the client to solve the client’s problems in all of their interactions. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Manages and performs site investigations, • Evaluates the surface and/or subsurface conditions and provide recommendations, • Plans and implements engineering program, including defining the project philosophy, activities, milestones, and staff requirements per customer requirements, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, bid packages and proposals, • Assigns and oversees project personnel to specific phases or aspects of project such as technical studies, product design, preparation of specifications and technical plans, and product testing, • Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications, • Interfaces with customers to provide project status reports and ensure customer needs are met, • Provides status and progress reports to customer, project team, and management, • Plans schedule of research according to company’s or contracting organization’s timetable, and establishes daily or weekly routines necessary to meet project timetable., • Provides expertise in field of research, • May participate in recruiting activities such as selecting, orienting, and training employees, • Conducts performance evaluation and provides performance feedback, • Counsels, and disciplines employees to reinforces policies and procedures, • Manages employees, provides oversite and direction, • Coaches, mentors, provides training and staff career development, • Performs and reports interim analysis of accumulated data to monitor for the safety purpose, • Develops research plan, designs experiments, outlines research procedures to be followed, and identifies and/or provides training to subordinate personnel to carry out research, • Establishes major design parameters for projects in conjunction with project design team and client, • Reinforces business relationships with existing client and develops new relationships with future clients, • Prepares proposal estimates of time and expenses required to complete a project, • Affixes their Professional Engineers seal on the completed work after verifying work is accurate Qualifications: • Bachelor’s degree in Civil Engineering, a minimum of 8-10 years of experience and 5 years of project management related experience. Previous construction experience is preferred., • Professional Engineer (PE) is required., • Certificates, Licenses, Registrations, • 40-hour OSHA HAZWOPER certification, • Registered Professional Engineer (PE), • Valid Driver’s License and possess reliable transportation to access job sites, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry., • Able to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting. Approximately 10% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $105,000–$150,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description WHO IS HILLIS-CARNES? Hillis-Carnes Engineering Associates (HCEA) is a multi-disciplined ENR Top 500 engineering firm with 20 offices in the mid-Atlantic and Florida. We have demonstrated a history of success for the past 35 years. We are 100% employee-owned ESOP, and our history of success can be attributed to our motivational employee owners. We believe in fostering teamwork, rewarding ambition, and providing opportunities for professional advancement. General Responsibilities Candidate will work with our geotechnical and materials testing/inspections departments and be responsible for a wide variety of projects for public and private sector clients. Duties may include but are not limited to; general geotechnical engineering practice including the preparation of geotechnical reports/calculation, technical support of field staff, review of construction inspection daily field reports, and occasional project site field visits related to the projects you are involved in. This position is currently listed as non-managerial but depending on the qualifications of the applicant could be re-categorized as a Managing Principal. Requirements • Local to the Northern New Jersey region or willing to relocate, • Bachelor and/or Master of Science in Civil Engineering, Geological Engineering, or similar ABET accredited Engineering degree, • 12+ years of progressive experience in the geotechnical engineering consulting industry., • Professional Engineering (P.E.) license in New Jersey or the ability to obtain such license through reciprocity within 3 months of hire date., • Local Northern New Jersey market experience including local industry relationships., • Familiarity with geotechnical software (i.e., tablogs/Tablabs, L-Pile, SLIDE, Settle 3D, MSEW, etc.)., • Strong oral and written communication skills., • Strong business development skills and experience., • Ability to interpret engineering and construction plans/specifications. Hillis-Carnes is an Equal Opportunity Employer/Affirmative Action Employer Minorities and Women are encouraged to apply. Job Posted by ApplicantPro

Job Description Currently we are looking for Soils Inspectors for immediate Building & Infrastructure Projects Location: Greater New York City Metropolitan Area (Project Location Varies) Status: Part Time as Needed Duration: Extended Client: Varies Compensation: $30hr - $40/hr Based on Certification & Experience Soils / Geotechnical Inspector Role Overview The Soils / Geotechnical Inspector provides specialized inspection, testing, and verification services for earthwork, foundations, and geotechnical construction activities on Building & Infrastructure projects throughout the Greater New York City Metropolitan Area. This role supports both Quality Control (QC) and Quality Assurance (QA) programs in accordance with 1 RCNY §101-06, Chapter 17 of the NYC Building Code, the International Building Code (IBC), and applicable geotechnical standards. The Soils / Geotechnical Inspector is responsible for verifying that subsurface construction activities, materials, and installations conform to approved geotechnical reports, design documents, specifications, and code requirements. Typical work includes inspection of site preparation, excavation, subgrade preparation, structural fill placement, compaction, foundations, and soil improvement systems. This position requires an active on-site presence during earthwork and foundation activities, including witnessing required testing, verifying compliance with approved procedures, and coordinating closely with contractors, construction managers, testing laboratories, and design professionals. The inspector will proactively identify non-conforming conditions, document deficiencies, issue Non-Conformance Reports (NCRs), and verify corrective actions and re-testing. The Soils / Geotechnical Inspector plays a critical role in ensuring foundation performance, structural stability, constructability alignment, and long-term project durability, particularly on projects involving complex subsurface conditions or deep foundation systems. • Work responsibilities may include but are not limited to the following:, • Inspection of site preparation, excavation, and subgrade conditions, • Observation of structural fill placement, lift thickness, and compaction, • Perform or Witness Field density testing with a Nuclear Moisture Density Gauge, • Review laboratory test results, • Inspection of shallow and deep foundation elements (spread footings, caissons, piles, micro-piles), • Oversight of soil improvement methods (e.g., ground improvement, grouting, compaction methods), • Work hours may include early mornings, evenings, weekends, or night shifts depending on project requirements and concrete placement schedules., • Reporting & Documentation Requires you to:, • Prepare and submit daily inspection and test reports within required timeframe., • Utilize client or company reporting platforms as require, • Maintain organized and auditable inspection records. Requirements • A minimum of 3 years of experience inspecting construction work in the city of NY, varied in Size and complexity. Projects may include commercial high-rise buildings, residential towers, transportation infrastructure, utilities, institutional facilities, and public-sector construction., • Familiarity with 101-06 and Chapter 17 of the NYC building code and the International Building Code., • Holds OSHA 10 or OSHA 30 Certification taken within the last 5 years., • Well versed in all aspects of construction and QA/QC responsibilities, • Familiarity with applicable Soils & Geotechnical Systems, • Training and/or knowledge in fall protection, scaffolding and ladders, & work-zone safety, • High School Diploma or Equivalent, • Physical Abilities applicable to construction projects in the City of New York and the ability to work outdoors in varying weather conditions and navigate active construction sites, including climbing ladders, scaffolding, and walking uneven surfaces., • Currently holds certification as in one or more of the following:, • Bachelors Degree in Civil Engineering (accredited institution or equivalent), • ICC Certification Soils Special Inspector, • NICET Level I Geotechnical Certification, • NICET Level II Geotechnical Certification, • NICET Level III Geotechnical Certification In this roll you will: • Implement the quality assurance measures on varying construction projects., • Review and submit all required documentation in accordance with project specifications, • Continually monitor work-in-progress, • Issue Non-Conformance Reports (NCR) where necessary., • Conduct inspections/tests as appropriate and as required, • Coordinate all work with the General Contractor or CM, • Notify the contractor if there are deviations to the Contract documents (including Contract Design Documents), • Document all RFIs; field coordination, issues and their resolution; deficiencies; corrective action; re-tests/inspections; deviations from the Contract Documents (including Design Drawings), • Take a proactive approach to quality workmanship and work-in-progress, • Ensure components meet project specifications, • Practice safety in accordance with applicable and site-specific standards Qualified professionals will also have: • Ability to communicate with colleagues and clients of all levels, • Experience working with Microsoft Office Suite, • Ability to read and understand construction drawings & specifications, • Reliable means of transportation & valid driver’s license, • Willingness to learn, • Works well with a team and individually, • Familiarity with construction industry codes, • Mathematical Knowledge - Using mathematics to solve problems., • Installation Oversight - Installing equipment, machines, to meet specifications., • Equipment Selection Oversight - Determining tools and equipment needed to do a job., • Ability to provide inspection reports in a timely manor, • Willingness to obtain additional certifications, • Works well with a team and individually MISTRAS Group, Inc. is committed to equal employment opportunity. Employment decisions including initial hiring and all matters involving the terms and conditions of employment will be made without regard to any protected class under applicable law. If hired, the employment relationship is “At-Will,” which means that employment can be terminated at any time, and for any reason, at the option of either the Company or the employee. Please direct questions about these policies to a MISTRAS Group, Inc. Human Resources representative. By submitting & signing , I hereby understand and agree to the terms and conditions of employment as outlined above. I certify that the responses and information provided in this application (including any other supporting documentation such as a cover letter, resume, or transcript) are true and accurate to the best of my knowledge. I understand that misrepresenting or omitting information requested is cause for dismissal at any time, without notice. I hereby give the Company permission to contact schools, previous employers (unless otherwise indicated), references, and others disclosed in my application. Note to Applicants: Smoking is prohibited in all indoor areas of the Company. Employees may use designated smoking areas (if established) in accordance with applicable state and local law. Rhode Island Applicants: The Company is subject to Chapters 29-38 of Title 28 of the General Laws of Rhode Island, and is therefore covered by the state’s workers’ compensation law. Initial (if applicable): Massachusetts Applicants: I understand that it is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Initial (if applicable): Maryland Applicants: I UNDERSTAND THAT UNDER MARYLAND LAW, AN EMPLOYER MAY NOT REQUIRE OR DEMAND, AS A CONDITION OF EMPLOYMENT, PROSPECTIVE EMPLOYMENT OR CONTINUED EMPLOYMENT, THAT ANY INDIVIDUAL SUBMIT TO OR TAKE A POLYGRAPH OR SIMILAR TEST. AN EMPLOYER WHO VIOLATES THIS LAW IS GUILTY OF A MISDEMEANOR AND SUBJECT TO A FINE NOT EXCEEDING $100. Mistras Group, Inc. is an Equal Opportunity Employer/Veterans/Disabled:

Job Description Senior Geotechnical/Structural Engineer Location: New York, NY (Fashion District) Employment Type: Full-time We are recruiting on purpose for an experienced Senior Geotechnical/Structural Engineer to join our growing team in New York City. This is a high-impact role for a motivated professional eager to lead complex engineering efforts that range from investigation and design to rehabilitation and forensic analysis. You’ll work on diverse infrastructure and structural projects, applying your expertise in both geotechnical and structural engineering to deliver resilient, safe, and efficient solutions. Key Responsibilities As a senior technical leader, your responsibilities will include: • Geotechnical – GEOSLOPE, Slide, Plaxis, LPILE, Settle3D, DeepEX, CIVILTech, • Structural – ETABS, SAP2000, RISA, • Work on challenging, multidisciplinary projects that make a real-world impact, • Be part of a collaborative, mission-driven team, • Grow professionally through mentorship, training, and visibility in the industry, • Flexible, supportive culture with opportunities to lead Ready to build what matters? Apply today and help shape the built environment with innovative, high-integrity engineering. Would you like a version tailored for LinkedIn or Indeed, or formatted as a PDF brochure for outreach campaigns?

Job Description Geotechnical department is looking for a candidate to support our growing team in the New York southern tier area (not New York City). This employee may be an entry level up to an associate level. Salary is negotiable based on prior experience and may be a wider range than listed based on discussions with supervisor and division director. Duties: • Perform geotechnical field services, which may include subsurface exploration layouts, drilling and test pit inspections, geophysical surveys, and construction monitoring., • Perform visual classification and laboratory testing of soil samples collected during the subsurface investigation., • Prepare subsurface exploration logs for use in geotechnical evaluations and reports., • B.S degree in civil engineering or related field., • 0 - 3 years of progressive experience in the geotechnical field., • Prior experience in a geotechnical laboratory is preferred but not required., • Engineer in Training (EIT) is preferred but not required., • Driver's license required., • Position will require out of town field work based on workload (approximately 40%), • Position will require ability to lift 50 pounds., • Effective verbal and written communication skills., • Possess a high capacity for self-motivation., • Ability to apply engineering principles to a variety of geotechnical projects. Salary Range: $60,000 - $75,000 The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Paid Parental Leave, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description Build Your Career at FCC Construction Inc. With 125 years of experience, the FCC Group's Infrastructure Division is present in 25 countries, and its activities cover all areas of engineering and construction. It is a leader in the execution of transport infrastructure, as well as in residential and non-residential construction. FCC Construcción is currently the fourth-largest construction company in Spain in terms of contract volume and ranks among the top 30 in the world, according to the international magazine ENR (Engineering News-Record). Project Opportunity We are looking for a Instrumentation & Monitoring Engineer to join our FCC Team assigned to the MTA’s Second Avenue Subway Project. This position is based in New York, NY, and requires daily presence in the office and/or on construction sites. The MTA’s Second Avenue Subway project is a $7.7B expansion that will extend the Q Line from 96th Street into East Harlem, adding three new ADA-accessible stations at 106th, 116th, and 125th Streets. This long-awaited project will restore rapid transit access to a community underserved for decades, ease overcrowding on the Lexington Avenue line, and cut commute times—delivering a transformative impact for East Harlem residents and the city as a whole. This position will support the $2 billion design-build contract for Phase 2, which includes two tunnels that will enable the development of two new subway stations in New York. Led by Connect Plus Partners, a joint venture between FCC Construction and Halmar International, the project brings together extensive experience in large-scale infrastructure, complex tunneling, and urban transit construction. POSITION SUMMARY Reports to: Technical Director The Instrumentation & Monitoring Engineer is responsible for coordinating the installation, management, and monitoring of instrumentation systems used to assess the behavior of ground conditions, adjacent buildings, and structures impacted by tunneling and shaft construction. The Instrumentation & Monitoring Engineer’s key responsibilities are: • Coordinate the installation and monitoring of instrumentation systems in accordance with contract requirements and design specifications, • Manage instrumentation activities in collaboration with subcontractors, third-party consultants, and internal teams, • Coordinate closely with Construction and Survey teams to ensure timely and accurate monitoring aligned with project schedules, • Ensure all instrumentation data is collected, validated, and reported per contract requirements, including baseline and weekly reporting, • Serve as Project Administrator for iSite, ensuring all instrumentation assets are properly logged, monitoring data is consistently uploaded/maintained, and trigger levels, alarms, and notifications are configured and functioning, • Develop and maintain the Response Action Plan (RAP), including alarm thresholds and response protocols, • Coordinate updates to the Geotechnical Instrumentation Plan with subcontractors, • Attend and support Excavation Support (RES) meetings, ensuring monitoring data is current and available, • Analyze instrumentation data and collaborate with site teams to assess structural behavior and risk, • Participate in coordination meetings with client representatives, including MTA and consultants, • Bachelor’s degree in Civil Engineering, Geotechnical Engineering, or related field preferred, • Minimum 5 years of experience (8+ years preferred) in heavy civil infrastructure projects, • Required experience in urban construction environments (tunneling, underground, or similar complex projects), • Experience with instrumentation and monitoring systems for geotechnical or structural applications, • Familiarity with web-based monitoring/data systems (e.g., iSite) strongly preferred, • Proficiency in Microsoft Office (Word, Excel), • Experience with CAD and ProjectWise is a plus, • Experience on similar large-scale urban infrastructure projects, • Ability to work extended hours or weekends as needed based on project demands, • Ability to sit for extended periods while working at a computer and reviewing technical data and reports, • Ability to occasionally stand, walk, and navigate active construction sites, including uneven terrain, confined spaces, and varying elevations, • Ability to climb ladders, stairs, and access shafts or underground work areas as required, • Visual acuity to read detailed plans, instrumentation data, and computer screens, • Ability to wear required Personal Protective Equipment (PPE), including hard hat, safety vest, safety glasses, and steel-toe boots when in the field FCC is dedicated to creating an inclusive workplace where diversity is valued and respected. As an Affirmative Action/Equal Opportunity Employer, we do not discriminate against any applicant for employment or employee because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, genetics, creed, veteran status, military status, or any other characteristic protected under Federal, State, or local laws. Reasonable accommodation will be provided to qualified individuals with disabilities in accordance with applicable law.

Job Description Position Title: Structural Project Engineer (Licensed NY PE) About Us PVEDI is a national, multidisciplinary architecture and engineering firm providing comprehensive services across diverse industries and market sectors. We bring together creative and detail-oriented specialists to deliver high-value, personalized solutions to complex design challenges. With 7 offices across 5 states and a team of 175+ professionals, we combine the responsive culture of a small firm with the robust resources and expertise of a large company. Our integrated services include civil engineering, land planning, surveying, environmental consulting, structures design, building envelope consulting, MEP, forensics and inspection, compliance reporting, architectural design, interior design, landscape architecture, and planning—particularly for commercial, leisure, hospitality, residential, and planning projects. The Opportunity We are seeking a talented and motivated Professional Engineer (PE) with expertise in structural design and analysis to join our growing team in New York. This position offers a primarily technical role with clear pathways for advancement into project leadership for candidates with interest in career development. Role and Responsibilities This dynamic position spans from detailed structural engineering to potential project oversight, tailored to your skills and career aspirations: Core Technical / Engineering Duties • Perform structural design and analysis (steel, concrete, timber, masonry, etc.) for buildings, infrastructure, and industrial/process support structures, • Prepare calculation packages, technical specifications, and design documentation, • Produce construction drawings, details, specifications, and design deliverables, • Review and coordinate structural submittals, respond to RFIs, issue addenda, and review shop drawings, • Conduct site visits for periodic observation, construction administration, and verification of field conditions, • Perform structural assessments, retrofit/rehabilitation/repair designs, and forensic investigations, • Conduct structural peer review or QA/QC checks (self-check, or for junior staff), • Assist or lead project scope definition, scheduling, resource planning, and budgeting, • Act as client technical liaison, attend client meetings, present design decisions, • Coordinate internal engineering resources, delegate tasks, and mentor less experienced engineers, • Participate in proposals, estimates, technical write-ups, and business development, • Professional Engineer (PE) license in New York (required), • Bachelor's degree in Civil or Structural Engineering (Master's degree strongly preferred), • 5-8+ years of proven experience in structural engineering design, calculations, drawings, and analysis in a consulting/design office environment, • Advanced proficiency with structural analysis and design software, • Experience with Revit or similar modeling software is highly desirable, • Strong technical writing skills for reports, memos, and calculations, • Excellent verbal and written communication abilities with cross-disciplinary collaboration skills, • Self-driven, detail-oriented, organized approach with ability to manage multiple tasks under deadlines This position is based in our New York, NY office (10018). Sign-on bonus eligible PVEDI provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, PVEDI complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. PVEDI expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status.

Job DescriptionSalary: $63,000 - 91,500 Annual Base Salary DOE About mcfa: We are a professional services firm in the Architecture/Engineering/Construction (AEC) industry serving public and private sector clients in the Mid-Atlantic region. Our services include Strategy, Planning, Program Management & Construction Management. Our goal is to help every employee design a fulfilling career through alignment of their individual passions/skills with the vision of the organization. Our mission is "Inspiring People and Places through Project Leadership and Project Development." How you'll get to contribute: We are seeking a dedicated and skilled Construction Inspector for soil testing inspections and future road and bridge inspection projects. Our ideal candidate will be a highly motivated & qualified individual, with experience in quality assurance and quality control testing of materials related to soils and aggregates in the field. Candidate should have a solid understanding of civil engineering principles with a geotechnical focus, and a desire to work on multi-disciplinary projects. In this role, you will be responsible for overseeing and inspecting various highway and/or bridge construction projects across New Jersey, ensuring that all work is completed in accordance with established standards, specifications, and regulations. This role will also involve office engineer duties as outlined below. Work schedule varies according to job assignments and/or contractors' schedule, to include night work, weekends, and holidays. This job requires travel to various job sites. What you'll do: • Material quality services are completed through field operations in all the major material disciplines as directed (soils, aggregate, metals, structures, asphalt, concrete coatings, and paints)., • Observe field work to ensure workmanship and materials meet standards., • Inspect soil boring operations -- roadway borings, retaining wall borings, bridge borings., • Soil identification., • Prepare field boring logs in accordance with NJ Turnpike procedures., • Install wells and record monitoring well data., • Enter data for Test calculations., • Maintain project records., • Ability to document daily inspections and various other reports., • Provide daily inspections of highway and/or bridge construction projects and inspect related work materials to ensure compliance with design specifications, safety standards, and state regulations., • Prepare detailed reports on inspection findings, including recommendations for corrective actions when necessary., • Monitor and document the progress of construction activities, identifying any deviations from the planned schedule or specifications., • Communicate with prime and other subcontractors., • Coordinate with project team members, engineers, and contractors to address and resolve any issues that arise during construction., • Ensure that the contracted drilling firm carries out its work in accordance with contract specification., • Review and interpret construction plans, blueprints, and specifications to ensure accurate implementation on-site., • Assist in the development and implementation of quality control procedures., • Attend meetings and conferences as needed., • Travel to various project sites. Who you are: • Bachelor's degree in Civil Engineering, Construction Engineering, Geological Engineering, Structural Engineering, or related field., • Familiar with ASTM and AASHTO standards for testing and inspections., • Strong knowledge of construction methods, materials, and legal regulations., • Excellent communication and interpersonal skills., • Ability to read and interpret engineering drawings and specifications., • Proficient in Microsoft Office and project/construction management software., • Valid driver's license, consistent means of transportation to/from project sites, and willingness to travel to various project sites within New Jersey., • 2+ years of experience in construction inspection, with a focus on transportation infrastructure projects and/or soil testing., • Familiarity with Bentley gINT software., • Certifications/Trainings, • OSHA 30, • American Concrete Institute (ACI) - Soil Inspector, Concrete, • International Code Council (ICC) - Soil Inspector, Masonry steel, Bolting, Welding, Post installed anchors, • TR1 Special Inspections, • New Jersey DCA Certified, • NICET I certification in Highway Construction Inspection or Construction Materials Testing Soils., • Professional Engineer (P.E.) license., • NJSAT and TCC/TCP Certifications. What's in it for you: Annual Paid Time Off: • Sick Leave: 5 Days (40 Hours), • Vacation: 15 Days (120 Hours), • Following your first full quarter worked, you will qualify for a profit-share bonus that is distributed at the end of each quarter if company targets are hit., • Incoming Growth Units: 10, • Eligible to participate in mcfa's family medical, dental and vision coverage; plan access begins on the first day of employment., • mcfa contributes up to 75% shared cost, not to exceed $700 per month., • Company paid life insurance plan (up to $100,000 per employee)., • You are eligible to participate in Company retirement plan (401k) on first day of employment with mcfa. mcfa Core Values (LEADS): • Love (each other, mission, work), • Entrepreneurial (spirit of innovation), • Accountability (to ourselves, our clients, each other), • Delight (customers and teammates), • Stretch (individual and collective growth mindset) mcfa is an Equal Employment Opportunity Employer. mcfa does not discriminate against any applicant or employee with regard to hiring, tenure of employment, promotion, transfer, selection for training, or any other terms or conditions of employment because of race, color, religion, sex, age, sexual orientation, disability, gender identity or national origin, status as a Vietnam-era or special disabled veteran in accordance with applicable federal law, or on any ground protected by state or local law in each area in which mcfa maintains facilities. #ZR

Job Description Build Your Career at FCC Construcción With 125 years of experience, the FCC Group's Infrastructure Division is present in 25 countries, and its activities cover all areas of engineering and construction. It is a leader in the execution of transport infrastructure, as well as in residential and non-residential construction. FCC Construcción is currently the fourth-largest construction company in Spain in terms of contract volume and ranks among the top 30 in the world, according to the international magazine ENR (Engineering News-Record). Project Opportunity We are looking for a Field Engineer to join our FCC Team assigned to the MTA’s Second Avenue Subway Project. This position is based in New York, NY, and requires daily presence in the office and/or on construction sites. The MTA’s Second Avenue Subway project is a $7.7B expansion that will extend the Q Line from 96th Street into East Harlem, adding three new ADA-accessible stations at 106th, 116th, and 125th Streets. This long-awaited project will restore rapid transit access to a community underserved for decades, ease overcrowding on the Lexington Avenue line, and cut commute times—delivering a transformative impact for East Harlem residents and the city as a whole. This position will support the $2 billion design-build contract for Phase 2, which includes two tunnels that will enable the development of two new subway stations in New York. Led by Connect Plus Partners, a joint venture between FCC Construction and Halmar International, the project brings together extensive experience in large-scale infrastructure, complex tunneling, and urban transit construction. Position Summary Reports to: Tunnel Superintendent or Cavern Superintendent The Field Engineer supports daily underground construction operations, working directly alongside superintendents and foremen in the field. This role is responsible for coordinating technical activities, tracking construction progress, and ensuring compliance with project specifications, safety standards, and quality requirements. Serving as a key link between design, planning, and execution, the field engineer contributes to the effective delivery of underground works. This is a field-based position that supports the full lifecycle of construction, with engineers assigned by activity zone (tunnel or cavern) across multiple work sites. The Field Engineer’s key responsibilities are: • Support the superintendent in day-to-day construction activities, providing engineering input to ensure design intent and construction means are aligned., • Assist with pre-construction planning, including constructability reviews, site logistics, and early procurement coordination., • Review and interpret construction drawings, specifications, and submittals for use in the field., • Coordinate and track construction progress using activity-level schedules and progress measurement systems., • Participate in and document responses to RFIs, field changes, and non-conformance issues., • Provide support in managing subcontractor interfaces, daily production tracking, and verification of completed quantities., • Monitor geotechnical instrumentation data (settlement points, extensometers, piezometers, etc.) and flag deviations to engineering or geotechnical leads., • Ensure compliance with safety plans, quality assurance protocols, and environmental standards through field inspections and checklists., • Assist with the preparation and maintenance of construction documentation, including as-builts, redlines, test reports, and shift logs., • Coordinate and input field data for schedule updates, productivity tracking, and earned value analysis., • Support the preparation of daily, weekly, and monthly progress reports., • Interface with survey teams, field engineers from other disciplines, and quality control personnel to align work., • Participate in shift turnover meetings and handover documentation for 24/7 operations., • Verify material deliveries and support materials tracking against planned work., • Support installation tracking and compliance for critical systems (e.g., waterproofing, utilities, ventilation, fireproofing)., • Bachelor’s degree in Civil, Mining, Geotechnical Engineering, or related discipline., • 8-10 years of field construction experience and a minimum of 5 years in underground construction., • Ability to read and interpret plans., • Proficiency with geotechnical monitoring systems and reporting tools., • Experience using construction management software (e.g., Procore, e-Builder, or similar)., • Proficiency in Microsoft Office Suite (Excel, Word, Outlook); familiarity with scheduling tools like Primavera P6 is a plus., • Familiarity with geotechnical monitoring systems and instrumentation data review., • Ability to work in confined underground environments with exposure to variable ground conditions and limited access., • Strong written and verbal communication skills; ability to document and report on field conditions clearly., • Demonstrated problem-solving skills and capacity to adapt to real-time construction challenges., • Must be detail-oriented and organized with the ability to prioritize tasks in a dynamic field environment., • Work is primarily at active underground construction sites with exposure to confined spaces, dust, noise, vibration, and variable ground conditions., • Must be able to stand, walk, and climb for extended periods; navigate uneven ground, scaffolding, and ladders; and work around heavy tunneling equipment., • Requires regular use of personal protective equipment (PPE), including hard hats, safety boots, high-visibility clothing, and eye/ear protection as necessary., • Ability to perform site inspections, monitor field activities, and respond quickly to safety or operational issues in physically demanding conditions., • Flexibility to work extended hours, nights, weekends, and rotating shifts as project demands require. FCC is dedicated to creating an inclusive workplace where diversity is valued and respected. As an Affirmative Action/Equal Opportunity Employer, we do not discriminate against any applicant for employment or employee because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, genetics, creed, veteran status, military status, or any other characteristic protected under Federal, State, or local laws. Reasonable accommodations will be provided to qualified individuals with disabilities in accordance with applicable law. If you need a reasonable accommodation during the interview process, please contact our HR team.

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Directs, coordinates, and exercises functional authority for planning, organization, control, integration, and completion of engineering project within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. This is a transitional position for someone with the required field experience and/or education to gain project engineering experience in a supervised manner prior to advancing into Project Engineer role. Essential Duties and Responsibilities include the following. Other duties may be assigned. · Designs major portions of an assigned project · Solves complex problems and calculations, using engineering formulas and skills · Evaluates research by others and writes reports · Assists the Project Engineer in the preparation of proposal estimates of time and expenses required to complete the project · Assists the Project Engineer in scheduling staffing requirements for field projects · Assists the Project Engineer in supervising and instructing, as needed, the responsibilities of field personnel on projects assigned to them · Plans and implements engineering programs, including defining the project philosophy, activities, milestones, and staff requirements, per customer requirements · Develops and maintains a schedule and budget for the assigned engineering project · Provides reports on the status of project milestones and adjusts schedules accordingly · Controls expenditures within limitations of project budget · Identifies project staffing requirements and coordinates staffing with supporting organization managers · Coordinates preparation and delivery of project deliverables, design documents, and bid packages · Assigns and oversees project personnel to specific phases or aspects of project such as technical studies, product design, preparation of specifications and technical plans, and product testing · Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications · Coordinates activities concerned with technical developments, scheduling, and resolving engineering design and test problems · Directs integration of technical activities · Evaluates and presents changes for design, specifications, drawing releases, reports, etc. to the Project Engineer and /or Project manager for approval · Prepares interim and completion project reports · Interfaces with customers to provide project status reports and ensure customer needs are met · Provides status and progress reports to customer, project team, and management · Reviews project proposal or plan to determine time frame, funding limitations, procedures for accomplishing project, staffing requirements, and allotment of available resources to various phases of project · Supervises field work and performs field work when needed · Establishes work plan and staffing for each phase of project and arranges for recruitment or assignment of project personnel · Confers with project staff to outline workplan and to assign duties, responsibilities, and scope of authority · Directs and coordinates activities of project personnel to ensure project progresses on schedule and within prescribed budget · Supervises project personnel and oversees their daily activities to ensure it is correct and complete · Reviews status reports prepared by project personnel and modifies schedules or plans as required · Prepares project reports for management, client, or others · Confers with project personnel to provide technical advice and to resolve problems · Coordinates project activities with government regulatory or other governmental agencies · Identifies the potential for new projects and seeks opportunities to promote the company’s services on an ongoing basis · Travels 25% of the time which may be out of state Supervisory Responsibilities This job has some supervisory responsibilities. Qualifications - To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to review and understand plans, specs, and reports including site, grading, utility, foundation, details, structural, drawings, architectural, grading, federal, state and local regulations. Education and/or Experience A minimum of 5-8 years of field and/or related experience where a PE license counts towards that related experience, a bachelor’s degree in a related field, and demonstrates ability to meet the requirements of the job as set forth in this description. Previous construction experience is preferred. Professional Engineer (PE) license is preferred or have the ability to become licensed within 6 months of being in this position. Certificates, Licenses, Registrations 40-hour OSHA HAZWOPER certification Registered Professional Engineer (PE) preferred or have the ability to become licensed within 6 months of being in this position Valid Driver’s License and possess reliable transportation to access job sites Language Skills Proficient in communicating both verbal and written in the English language. Proficient in communicating both verbal and written in the English language. Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to write speeches and articles for publication that conform to prescribed style and format. Ability to effectively present information to top management, public groups, and/or boards of directors. Mathematical Skills Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Computer Skills Proficient or familiarity with AutoCAD, Autodesk Civil 3D, NitroPro, GSLOPE, KeyWall, Rocscience, MS Word, Excel, Adobe. Tools/Equipment Position requires ability to use tools such as a lump hammer, shovel, hand auger, Nuclear Density Gauge. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting. Approximately 25% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $90,000–$120,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description Geotechnical Project Engineer/Manager to join its collaborative team in New York City, White Plains, or Melville, Long Island. This position offers a hybrid work schedule. This individual will serve a key function in providing geotechnical engineering expertise through geotechnical analysis and design, and efforts that support management of projects, supervision of staff engineers, and interfacing with clients. In this role, you will have the opportunity to partner cross-functionally on both small-scale and large-scale geotechnical projects primarily in office, residential, and retail\warehouse markets. Job Responsibilities • Perform complex analyses, structural design of pile elements and underpinning systems, and special engineering inspections;, • Prepare technical documents and manages the preparation of the proposals, reports, construction documents, and construction-related correspondence associated with the projects managed;, • Supervise field investigations, and conventional earthwork and foundation construction activities;, • Perform and manage multiple projects and tasks within specific budgets, schedules, and deadlines. Plans, schedules and develops task and project budgets. Prepare progress reports, draft change orders, draft invoices, and project billings;, • Bachelor's degree in Civil or Geotechnical Engineering; Master's degree with Geotechnical emphasis;, • Professional Engineer licensure;, • 6+ years of related Geotechnical experience;, • 3+ years of field experience with geotechnical investigations and construction observation experience including: mass grading, deep foundations, subgrade for footings, ground improvement, and excavation support including tieback installation and testing;, • Proven experience in preparing technical reports, specifications, construction plans, and geotechnical recommendations; writing proposals; running/coordinating projects; managing clients; managing billings; and reviewing the work of staff and mentoring staff;, • Strong understanding of codes and other regulatory requirements;, • Knowledge of quantitative/technical analyses and related software;, • Possess an entrepreneurial and professional demeanor, as well as strong written, verbal, and presentation communication skills;, • Desire and ability to seek out new business opportunities and develop additional clients while maintaining project workload;, • Ability to coach and assist with the management of staff;, • Demonstrated ability to work with staff, clients, and regulatory agencies;, • A collaborative team player with excellent interpersonal and social skills; and, • Possess reliable transportation for client meetings and job site visits and a valid driver's license in good standing.

Job Description About us! Vanderweil Engineers is a top-ranked national engineering firm specializing in Power, MEP/FP and technology systems for a wide range of market sectors. In our 75th year in operation with a staff of 500+ located across nine offices, we are proud to be one of the leading independently owned engineering firms in the country. If you are looking for an opportunity to break away from your silo to grow your career while working on high profile projects, we are looking for you. Take a leadership role and help shape the future of our growing Power Delivery Group. Join us to do the best work of your career as a Lead Substation Structural Engineer with our growing Power Group team at our headquarters in Boston, MA (Seaport District) or New York, NY, or Philadelphia, PA (hybrid schedule). What You will Achieve: With our continued growth in the Transmission & Distribution sector, we are seeking a Lead Substation Structural Engineer. Work on critical infrastructure projects and contribute to the structural integrity of high-voltage substations nationwide. Our Power Group provides full-service engineering and design solutions for utility, institutional, and commercial clients across the U.S., with a strong focus on reliability, sustainability, and innovation. We offer clear paths for professional growth, leadership development, and the opportunity to directly impact our success as we expand into new markets and technologies. Some of your responsibilities include the following: • Lead the structural engineering and design of both transmission and distribution substations, including new builds, expansions, and retrofits., • Perform and review structural analysis and design using software such as RISA-3D, STAAD.Pro, L-Pile, RAM Structural System, CSI SAFE, or MathCAD., • Develop and oversee the production of structural construction documents, including detailed specifications, plans, and calculations for steel, concrete, and foundation systems., • Evaluate existing structures for loading capacity, retrofit needs, and compliance with current codes., • Coordinate with geotechnical teams for interpretation and application of soil data into foundation design., • Support and lead field investigations, constructability reviews, and site assessments., • Review and approve delegated design work from subconsultants or junior engineers, ensuring compliance with engineering best practices and project requirements., • Mentor and provide technical leadership to junior engineers, designers, and drafters. Essential Skills & Requirements: • 8+ years of structural engineering experience,, • 5+ years in substation structural design for transmission and/or distribution facilities., • Bachelor’s degree in Civil Engineering, • PE license, • Designing and analyzing steel structures, equipment foundations, site civil systems for substations., • Proficient with structural software like STAAD.Pro, RISA-3D, RAM Structural System, L-Pile, CSI SAFE, MFAD, or MathCAD. Our Flexible & Hybrid Work Culture: We know that work/life integration is important to our employees. Our hybrid work style (up to 2 days remote per week) allows team members to have flexibility while building their skills through in-person exposure to industry experts. Our wellness programs prioritize our team members’ physical and behavioral health. We are an equal opportunity employer committed to diversity in the workplace. This position has a salary range of $110,000 to $160,000 and is commensurate on years of experience, licensure, skill sets, location, and education. Reach out to us to discuss total rewards and compensation package.

Job Description Civil Engineer (Transportation/Rail/Bridge) Location: Woodbridge, New Jersey Employment Type: Full-Time | On-Site Salary Range: $100,000 – $150,000 annually Industry: Transportation | Rail | Bridge | Infrastructure About Garg Consulting Services, Inc. Garg Consulting Services, Inc. (Garg) is a leading multidisciplinary engineering and construction management firm specializing in transportation infrastructure, roadway design, and DOT projects throughout the Northeast. We are currently seeking an experienced Civil Engineer (Transportation/Rail/Bridge) to join our growing team in Woodbridge, NJ. Position Overview The Civil Engineer will support the planning, design, and construction of complex transportation infrastructure projects, including roadway, rail, tunnel, and bridge facilities. This role is ideal for a transportation civil engineer with hands-on experience supporting DOT, rail, and large-scale infrastructure programs from design through construction. This role offers hands-on technical responsibility and collaboration with multidisciplinary teams on high-profile transportation initiatives. Key Responsibilities • Support the planning, design, and construction delivery of transportation infrastructure projects, including rail, tunnel, bridge, and ancillary facilities, • Perform civil engineering design and technical support for rail corridors, tunnel structures, bridges, concrete structures, and supporting transportation infrastructure, • Assist with engineering tasks across multiple work packages, supporting efficient execution of large, multi-disciplinary transportation projects, • Prepare, review, and coordinate design documents, calculations, and technical reports in compliance with NJDOT, AASHTO, FRA, and applicable regulations, • Collaborate with structural, rail, tunnel, geotechnical, and construction teams to support integrated design and constructability, • Provide construction phase engineering support, including RFIs, shop drawing reviews, contractor coordination, and field support, • Participate in site visits and field inspections to verify compliance with design intent, contract documents, and safety requirements, • Coordinate with transportation agencies, contractors, inspectors, and stakeholders to resolve design and construction issues, • Assist with project schedules, budgets, documentation, and quality control activities, • Promote safety standards, QA/QC procedures, and continuous improvement practices across all infrastructure projectsRequired Qualifications, • Bachelor's degree in civil engineering from an ABET-accredited program, • 5–8 years of professional civil engineering experience in transportation, rail, tunnel, bridge, or large-scale infrastructure projects, • Engineer-in-Training (EIT) certification required, • Professional Engineer (PE) license preferred, • Experience supporting rail infrastructure, tunnel construction, bridge projects, or complex transportation programs, • Working knowledge of NJDOT, AASHTO, FRA, and applicable federal and state design standards, • Proficiency with AutoCAD Civil 3D and related civil engineering design software, • Experience working with state DOTs, rail agencies, or major transportation authorities preferred, • Strong technical, analytical, and problem-solving skills, • Excellent written and verbal communication skills, • Ability to work effectively in multidisciplinary teamsCompensation & Benefits, • Competitive Salary: $100,000 – $150,000 annually (based on experience), • Medical, Dental & Vision Insurance, • 401(k) Retirement Plan with Company Match, • Paid Time Off & Paid Holidays, • Performance-Based Bonuses, • Professional Development & Licensing Support, • Wellness perk; gym membership reimbursement Equal Opportunity Employer Garg is an Equal Opportunity Employer. Employment decisions are based on merit, qualifications, performance, and capabilities, and are made in compliance with applicable federal, state, and local laws.

Job Description Currently we are looking for Fire Protection Inspectors for immediate Building & Infrastructure Projects Location: Greater New York City Metropolitan Area (Project Location Varies) Status: Part Time as Needed Duration: Extended Client: Varies Compensation: $25hr - $40/hr Based on Certification & Experience Fire Protection Inspector Role Overview The Fire Protection Inspector provides specialized inspection and verification services for fire and life-safety systems on Building & Infrastructure projects throughout the Greater New York City Metropolitan Area. This role supports both Quality Control (QC) and Quality Assurance (QA) programs in accordance with 1 RCNY §101-06, Chapter 17 of the NYC Building Code, the International Building Code (IBC), and applicable NFPA standards, as required by each project. The Fire Protection Inspector is responsible for verifying that fire protection systems and fire-resistive construction are installed in strict conformance with approved design documents, shop drawings, specifications, code requirements, and manufacturer instructions. Systems may include, but are not limited to, sprinkler and standpipe systems, fire suppression piping, spray-applied fireproofing, firestopping, fire dampers, and related life-safety components. This role requires an active on-site presence during installation and testing activities, including witnessing required inspections, hydrostatic tests, acceptance testing, and special inspections. The inspector will coordinate closely with contractors, construction managers, testing laboratories, special inspection agencies, and client representatives to ensure all fire protection work meets regulatory and project-specific requirements. The Fire Protection Inspector plays a critical role in life-safety compliance, proactively identifying non-conforming conditions, documenting deficiencies, issuing Non-Conformance Reports (NCRs) where required, and verifying corrective actions and re-inspections. Clear documentation, timely communication, and strict adherence to code requirements are essential to the success of this role. • Work responsibilities may include but are not limited to the following:, • Inspection of fire suppression piping, hangers, seismic bracing, and supports, • Inspection of spray-applied fire-resistive materials (SFRM) and intumescent coatings, • Verification of firestopping systems and through-penetration fire assemblies, • Witnessing hydrostatic, flush, and acceptance tests for water-based systems, • Review of approved shop drawings, material submittals, and test reports, • Work hours may include early mornings, evenings, weekends, or night shifts depending on project requirements and concrete placement schedules., • Reporting & Documentation Requires you to:, • Prepare and submit daily inspection and test reports within required timeframe., • Utilize client or company reporting platforms as require, • A minimum of 3 years of experience inspecting construction work in the city of NY, varied in Size and complexity. Projects may include commercial high-rise buildings, residential towers, transportation infrastructure, utilities, institutional facilities, and public-sector construction., • Familiarity with 101-06 and Chapter 17 of the NYC building code and the International Building Code., • Holds OSHA 10 or OSHA 30 Certification taken within the last 5 years., • Well versed in all aspects of construction and QA/QC responsibilities, • Familiarity with applicable Soils & Geotechnical Systems, • Training and/or knowledge in fall protection, scaffolding and ladders, & work-zone safety, • High School Diploma or Equivalent, • Physical Abilities applicable to construction projects in the City of New York and the ability to work outdoors in varying weather conditions and navigate active construction sites, including climbing ladders, scaffolding, and walking uneven surfaces., • Currently holds certification as in one or more of the following:, • Bachelors Degree in Architecture (accredited institution or equivalent), • Bachelors Degree in Engineering (accredited institution or equivalent), • ICC Certification as a Spray Applied Fireproofing Special Inspector, • NICET Level II Certification in Fire Protection – Inspection and Testing of Water based Systems, • NYC Licensed Class A or Class B Master Fire Suppression Piping Contractor License In this roll you will: • Implement the quality assurance measures on varying construction projects., • Review and submit all required documentation in accordance with project specifications, • Continually monitor work-in-progress, • Issue Non-Conformance Reports (NCR) where necessary., • Conduct inspections/tests as appropriate and as required, • Coordinate all work with the General Contractor or CM, • Notify the contractor if there are deviations to the Contract documents (including Contract Design Documents), • Document all RFIs; field coordination, issues and their resolution; deficiencies; corrective action; re-tests/inspections; deviations from the Contract Documents (including Design Drawings), • Take a proactive approach to quality workmanship and work-in-progress, • Ensure components meet project specifications, • Practice safety in accordance with applicable and site-specific standards Qualified professionals will also have: • Ability to communicate with colleagues and clients of all levels, • Experience working with Microsoft Office Suite, • Ability to read and understand construction drawings & specifications, • Reliable means of transportation & valid driver’s license, • Willingness to learn, • Works well with a team and individually, • Familiarity with construction industry codes, • Mathematical Knowledge - Using mathematics to solve problems., • Installation Oversight - Installing equipment, machines, to meet specifications., • Equipment Selection Oversight - Determining tools and equipment needed to do a job., • Ability to provide inspection reports in a timely manor, • Willingness to obtain additional certifications, • Works well with a team and individually MISTRAS Group, Inc. is committed to equal employment opportunity. Employment decisions including initial hiring and all matters involving the terms and conditions of employment will be made without regard to any protected class under applicable law. If hired, the employment relationship is “At-Will,” which means that employment can be terminated at any time, and for any reason, at the option of either the Company or the employee. Please direct questions about these policies to a MISTRAS Group, Inc. Human Resources representative. By submitting & signing , I hereby understand and agree to the terms and conditions of employment as outlined above. I certify that the responses and information provided in this application (including any other supporting documentation such as a cover letter, resume, or transcript) are true and accurate to the best of my knowledge. I understand that misrepresenting or omitting information requested is cause for dismissal at any time, without notice. I hereby give the Company permission to contact schools, previous employers (unless otherwise indicated), references, and others disclosed in my application. Note to Applicants: Smoking is prohibited in all indoor areas of the Company. Employees may use designated smoking areas (if established) in accordance with applicable state and local law. Rhode Island Applicants: The Company is subject to Chapters 29-38 of Title 28 of the General Laws of Rhode Island, and is therefore covered by the state’s workers’ compensation law. Initial (if applicable): Massachusetts Applicants: I understand that it is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Initial (if applicable): Maryland Applicants: I UNDERSTAND THAT UNDER MARYLAND LAW, AN EMPLOYER MAY NOT REQUIRE OR DEMAND, AS A CONDITION OF EMPLOYMENT, PROSPECTIVE EMPLOYMENT OR CONTINUED EMPLOYMENT, THAT ANY INDIVIDUAL SUBMIT TO OR TAKE A POLYGRAPH OR SIMILAR TEST. AN EMPLOYER WHO VIOLATES THIS LAW IS GUILTY OF A MISDEMEANOR AND SUBJECT TO A FINE NOT EXCEEDING $100. Mistras Group, Inc. is an Equal Opportunity Employer/Veterans/Disabled:

Job Description Location: Greater New York City Metropolitan Area (Project Location Varies) Status: Part Time as Needed Duration: Extended Client: Varies Compensation: $32.50hr - $42.50/hr Based on Certification & Experience Masonry Inspector Role Overview The Masonry Inspector provides specialized inspection and verification services for masonry construction on Building & Infrastructure projects throughout the Greater New York City Metropolitan Area. This role supports both Quality Control (QC) and Quality Assurance (QA) programs in accordance with 1 RCNY §101-06, Chapter 17 of the NYC Building Code, the International Building Code (IBC), and applicable masonry standards. The Masonry Inspector is responsible for verifying that masonry materials, reinforcement, placement, construction methods, and workmanship conform to approved contract documents, structural drawings, specifications, and code requirements. This includes inspection of reinforced and unreinforced masonry systems used in load-bearing and non-load-bearing applications. This position requires an active on-site presence during masonry construction activities, including observation of reinforcing steel placement, grout placement, masonry unit installation, and associated testing. The inspector coordinates closely with contractors, construction managers, special inspectors, testing laboratories, and client representatives to ensure inspections and tests are performed at the appropriate stages of work. The Masonry Inspector plays a critical role in ensuring structural integrity, durability, and code compliance, proactively identifying non-conforming conditions, documenting deficiencies, issuing Non-Conformance Reports (NCRs) where required, and verifying corrective actions and re-inspections. • Work responsibilities may include but are not limited to the following:, • Inspection of CMU, brick, stone, and architectural masonry installations, • Verification of reinforcing steel size, placement, spacing, and anchorage, • Observation of grout placement, consolidation, and curing, • Verification of masonry unit type, mortar, grout, and material certifications, • Inspection of anchors, embeds, lintels, and bond beams, • Work hours may include early mornings, evenings, weekends, or night shifts depending on project requirements and concrete placement schedules., • Reporting & Documentation Requires you to:, • Prepare and submit daily inspection and test reports within required timeframe., • Utilize client or company reporting platforms as require, • Maintain organized and auditable inspection records Requirements • A minimum of 3 years of experience inspecting construction work in the city of NY, varied in Size and complexity. Projects may include commercial high-rise buildings, residential towers, transportation infrastructure, utilities, institutional facilities, and public-sector construction., • Familiarity with 101-06 and Chapter 17 of the NYC building code and the International Building Code., • Holds OSHA 10 or OSHA 30 Certification taken within the last 5 years., • Well versed in all aspects of construction and QA/QC responsibilities, • Familiarity with applicable Soils & Geotechnical Systems, • Training and/or knowledge in fall protection, scaffolding and ladders, & work-zone safety, • High School Diploma or Equivalent, • Physical Abilities applicable to construction projects in the City of New York and the ability to work outdoors in varying weather conditions and navigate active construction sites, including climbing ladders, scaffolding, and walking uneven surfaces., • Currently holds certification as in one or more of the following:, • ICC Certification as a Structural Masonry Special Inspector In this roll you will: • Implement the quality assurance measures on varying construction projects., • Review and submit all required documentation in accordance with project specifications, • Continually monitor work-in-progress, • Issue Non-Conformance Reports (NCR) where necessary., • Conduct inspections/tests as appropriate and as required, • Coordinate all work with the General Contractor or CM, • Notify the contractor if there are deviations to the Contract documents (including Contract Design Documents), • Document all RFIs; field coordination, issues and their resolution; deficiencies; corrective action; re-tests/inspections; deviations from the Contract Documents (including Design Drawings), • Take a proactive approach to quality workmanship and work-in-progress, • Ensure components meet project specifications, • Practice safety in accordance with applicable and site-specific standards Qualified professionals will also have: • Ability to communicate with colleagues and clients of all levels, • Experience working with Microsoft Office Suite, • Ability to read and understand construction drawings & specifications, • Reliable means of transportation & valid driver’s license, • Willingness to learn, • Works well with a team and individually, • Familiarity with construction industry codes, • Mathematical Knowledge - Using mathematics to solve problems., • Installation Oversight - Installing equipment, machines, to meet specifications., • Equipment Selection Oversight - Determining tools and equipment needed to do a job., • Ability to provide inspection reports in a timely manor, • Willingness to obtain additional certifications, • Works well with a team and individually MISTRAS Group, Inc. is committed to equal employment opportunity. Employment decisions including initial hiring and all matters involving the terms and conditions of employment will be made without regard to any protected class under applicable law. If hired, the employment relationship is “At-Will,” which means that employment can be terminated at any time, and for any reason, at the option of either the Company or the employee. Please direct questions about these policies to a MISTRAS Group, Inc. Human Resources representative. By submitting & signing , I hereby understand and agree to the terms and conditions of employment as outlined above. I certify that the responses and information provided in this application (including any other supporting documentation such as a cover letter, resume, or transcript) are true and accurate to the best of my knowledge. I understand that misrepresenting or omitting information requested is cause for dismissal at any time, without notice. I hereby give the Company permission to contact schools, previous employers (unless otherwise indicated), references, and others disclosed in my application. Note to Applicants: Smoking is prohibited in all indoor areas of the Company. Employees may use designated smoking areas (if established) in accordance with applicable state and local law. Rhode Island Applicants: The Company is subject to Chapters 29-38 of Title 28 of the General Laws of Rhode Island, and is therefore covered by the state’s workers’ compensation law. Initial (if applicable): Massachusetts Applicants: I understand that it is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Initial (if applicable): Maryland Applicants: I UNDERSTAND THAT UNDER MARYLAND LAW, AN EMPLOYER MAY NOT REQUIRE OR DEMAND, AS A CONDITION OF EMPLOYMENT, PROSPECTIVE EMPLOYMENT OR CONTINUED EMPLOYMENT, THAT ANY INDIVIDUAL SUBMIT TO OR TAKE A POLYGRAPH OR SIMILAR TEST. AN EMPLOYER WHO VIOLATES THIS LAW IS GUILTY OF A MISDEMEANOR AND SUBJECT TO A FINE NOT EXCEEDING $100. Mistras Group, Inc. is an Equal Opportunity Employer/Veterans/Disabled:

Job DescriptionDescription: KS Engineers (KSE) is a mid-size engineering and surveying firm ranked among the leaders in design services. With seven offices across New York, New Jersey, Pennsylvania, and Connecticut, we have been delivering transportation and public infrastructure design and survey services for more than 35 years. KSE offers a full range of employee benefits, including medical, dental and vision insurances, a 401(k) plan, paid time off, Flexible Spending Accounts (FSAs), long- and short-term disabilities, and term life insurance. KSE is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Position – Special Inspector - ICC Soils Reports to: Manager – Special Inspections Job Summary: A Soils Special Inspector in New York City is responsible for ensuring that earthwork, foundations, and soil compaction comply with the NYC Building Code (Chapter 17) and the project’s specific geotechnical report. This role is a "field-heavy" position that requires high technical accuracy to ensure the structural stability of New York’s high-density developments. The Soils Special Inspector performs mandated third-party inspections and testing of soil conditions, fill placement, and foundation elements. You will verify that the subsurface work matches the approved architectural/engineering plans and the NYC Department of Buildings (DOB) Technical Reports (TR1). Technical Responsibilities: • Site Preparation & Subgrade Inspection: Verify that the site is stripped of organic matter and prepared according to the Geotechnical Report (BC 1704.7.1) before footings or fill are placed., • Fill Placement Monitoring: Oversee the placement of structural fill, ensuring lift thicknesses do not exceed code limits (typically 8–12 inches) and that the material matches specified classifications (BC 1704.7.2)., • In-Place Density Testing: Perform field density tests using a Nuclear Moisture-Density Gauge (Troxler/Humboldt) to ensure soil reaches the required compaction percentage (usually 95% Modified Proctor)., • Foundation Oversight: Inspect excavations for shallow foundations (spread footings) and deep foundations (piles, caissons, or helical piers) to confirm bearing capacity and depth (BC 1704.8/1704.9)., • Reporting: Prepare and submit Daily Field Reports (DFRs). Identify non-conformance issues (NCRs), document them with photos, and verify when they have been corrected and re-tested., • Safety Compliance: Maintain a safe work environment in active excavation zones, adhering to OSHA standards and NYC DOB site safety protocols. Technical Skills: • Ability to read and interpret complex Foundation Plans, Borings Logs, and Geotechnical Reports., • Proficiency in field testing equipment (Sand cone, Nuclear gauge, Dynamic Cone Penetrometer)., • Entry-Level (1-3 years) or Mid-Level (4-9 years) in inspecting construction work in the city of NY, varied in size and complexity., • Bachelor’s Degree in Geotechnical, Civil, or Structural Engineering with 1 year of relevant experience; OR NICET Level 1 Geotechnical Certification with 2 years of relevant experience OR ICC Soils Special Inspector certification with 1 year of relevant experience., • ICC Soils, • Nuclear Gauge Safety Certification (U.S. Dept. of Transportation), • OSHA 30, • Familiarity with soil sampling and testing as per requirements of Chapter 17 of the NYC building code. Professional Development: • Willing to pursue professional development, training, and licensing. Physical requirements: • Handle, inspect, and /or feel materials and/or equipment relevant to the job., • Move around on the jobsite, including ascending or descending on the landscape or usage of scaffolding or on a ladder, and positioning oneself appropriately to assess necessary testing materials and equipment, usually for prolonged periods of time., • Lift and/or move up to 50lbs for some types of monitoring and inspections. Salary range: $28-45 per hour based on experience KS Engineers, P.C. is an EOE/AA/VEV/Disabled Employer. KSE will not discriminate based on race, color, religion, creed, sex, national origin, marital status, age, disability, veteran status, citizenship status, or other status protected by law.

Job DescriptionAbout the Role As a Project Engineer on our Engineering team, you'll play a central role in advancing solar and distributed generation projects from early development through construction-ready design. Working closely with our Development, Construction, and third-party engineering teams, you'll own the technical work that turns a project concept into a permitted, optimized, buildable system—driving accuracy, efficiency, and value at every stage. What You'll Own • Site Due Diligence – Coordinate and oversee environmental analysis, surveys, and geotechnical investigations; bid, negotiate, and manage contracts for third-party diligence work on active development projects., • Engineering Design – Review site data and produce civil, electrical, and structural design drawings using AutoCAD and Virto, independently or in collaboration with external engineers of record., • System Optimization – Iterate designs to identify the optimal equipment, layout, and system configuration that maximizes specific yield and overall project value., • Energy Modeling – Develop detailed energy models in PVSyst, incorporating 3D shading scenes, soiling calculations, site-specific losses, and carefully selected weather data., • Permitting & Construction Drawings – Oversee the development of permit and construction-level drawings across all disciplines, ensuring code compliance, AHJ and utility conformance, and alignment with Madison technical specifications., • Education – Bachelor's degree in Engineering or equivalent experience; Electrical Engineering preferred, though Mechanical, Civil, and Energy Engineering backgrounds have also been successful in this role., • Experience – 3+ years designing and permitting photovoltaic construction projects, or comparable transferable experience in a related field., • Technical Skills – Proficiency in AutoCAD and PVSyst (or equivalent energy modeling tools); familiarity with Procore or similar project management platforms., • Design Judgment – Ability to translate site due diligence findings into optimized, code-compliant designs across civil, electrical, and structural disciplines., • Mindset – Highly organized, detail-oriented, and self-directed; comfortable managing multiple projects simultaneously and working efficiently within defined budgets and schedules., • Collaboration – Strong communicator who can lead technical meetings with clients, engineers, regulators, and consultants and hold third parties accountable to quality and timelines.Benefits, • PTO and company holidays, • Medical, dental, vision, • Employer-paid short-term disability, long-term disability, life insurance, • 401(k) and company match, • Professional development stipend, • Strong culture of collaboration, performance, and personal growth$115,000 - $145,000 a yearThe actual salary offered may vary depending on job-related factors including, but not limited to knowledge, skills, experience and location.How We WorkAt Madison Energy Infrastructure, we believe in the power of clean energy infrastructure to drive real impact—for our customers, our partners, and the communities we serve. We've quickly emerged as a preeminent developer, investor, and operator of distributed generation, helping organizations across sectors meet their energy goals with certainty, speed, and trust. Our robust portfolio consists of over half a gigawatt of clean energy infrastructure projects across more than 25 states.We're building a team that thrives on ownership and ambition. As we expand into direct, end-to-end services for Fortune 500 companies, public entities, and nonprofits alike, we rely on collaborative thinkers who bring structure to complexity, energy to execution, and curiosity to every challenge.Our environment is fast-paced and outcome-oriented—but grounded in the belief that how we work together matters as much as what we deliver. If you're excited to shape the future of clean energy and be part of a high-performance, high-integrity team, we'd love to meet you.Madison Energy Infrastructure is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.

Job DescriptionAbout Us Solar Landscape is the leading commercial rooftop solar developer in the U.S. Only 4% of commercial rooftops host solar today — we’re changing that, fast. Commercial rooftop solar is the fastest, smartest way to build new clean power — delivering megawatts of generation in months, not years, and powering America’s energy and future right where it’s needed most. By turning rooftops into local power plants, we’re reshaping how — and how fast — energy gets built in the U.S. Recognized as the #1 Distributed Generation Developer by New Project Media, the #1 National Commercial Rooftop Solar Developer by Solar Power World, and winner of the U.S. Department of Energy’s Grand Prize for Clean Energy, Solar Landscape is defining the future of energy generation in America. Headquartered in Asbury Park, New Jersey, Solar Landscape has offices in Chicago, Baltimore, and New York City and operates in over a dozen states nationwide. We move fast, solve hard problems, and take our work seriously — but never ourselves. We value clear thinking, accountability, and execution. At the same time, we’re collaborative by default, and believe the best work happens when people enjoy working together. Our team is made up of smart, grounded people who show up for each other — whether that’s troubleshooting a system design or catching up over lunch. If you’re looking to do meaningful work in a high-performance environment — and be part of the team reshaping how energy gets built in the U.S. — we’d love to meet you. About The Role We are seeking a Solar Project Engineer to join our dynamic team and contribute to the development and execution of high-quality solar energy projects. As a Project Engineer at Solar Landscape, you will be responsible for hands-on design and overseeing external consultant design development of Solar Photovoltaic systems. This is an excellent opportunity for an engineering professional passionate about renewable energy and innovative solutions. Responsibilities • Deliver design and problem-solving services that support project schedules to the assigned project teams., • Plan and lead the design development effort for all assigned project teams., • Support Design team as part of initial training process and where needed thereafter., • Oversee/Design/Support commercial and grid supplied Solar Photovoltaic systems., • Prepare technical drawings, specifications of PV systems to ensure that installation and operations conform to standards and customer requirements., • Conduct detailed site evaluations., • Coordinate with structural, electrical, geotechnical, and civil Professional Engineers during design process to assure the design meets technical and code requirements. Manage professional engineer review process to obtain PE stamps on drawing packages., • Provide technical support to Commercial Sales and Finance for the development of technical proposals and customer presentations., • Participate in meetings and technical presentations to customers, investors, and PV technical community., • Provide engineering/technical input and direction to site evaluation, interconnect agreements and other associated tasks., • Work with appropriate electric utilities to prepare and process interconnection paperwork., • Review specifications for purchases of materials or equipment., • Identify appropriate equipment for use in PV systems and perform technical qualification of vendors., • Support Project Management and construction team with ongoing technical support, RFI’s, and As-builts., • Review of other design engineers’ work during design phase., • Lead cross-functional design reviews., • Develop necessary customer deliverables such as concept module layouts, single line diagrams, equipment or material specifications, engineering validation, 3-D renderings, and photo simulations., • Assist with Request for Proposal (RFP) reviews, technical writing, and response coordination.Qualifications, • Bachelor’s degree in Engineering (Electrical, Mechanical, Structural, or Civil preferred)., • 2+ years of experience in solar., • Proficiency in AutoCAD and MS Office Suite., • Experience in electrical, mechanical, structural, or civil engineering design., • Strong organizational, analytical, and problem-solving skills with the ability to manage priorities effectively., • Excellent verbal and written communication skills., • Ability to work independently and collaboratively in a fast-paced environment., • Acute attention to detail and strong judgment in decision-making., • Demonstrated ability to plan, organize, and execute projects effectively.Salary will vary depending on your location and job-related skills and experience. This is an incentive-based position with the potential to earn more. For part-time roles, your compensation will be adjusted to reflect your hours.Benefits and Perks We offer competitive compensation and benefits designed to support you inside and outside of work: · Training / Professional development opportunities · 401(k) with 4% company match· Summer Fridays· Flexible remote/hybrid work options· Paid parental leave· Team lunches, events, and stocked kitchens· Modern, collaborative office spaces in Asbury Park, New York City, Boston, Chicago, and Baltimore· Medical, dental, and vision coverage· Company-paid life and long-term disability insurance We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Position Overview Certerra Instrumentation and Monitoring, LLC is seeking a motivated Project Engineer to join our Instrumentation and Monitoring Group based in Ozone Park, New York. The Project Engineer will support and manage geotechnical and structural monitoring programs for complex infrastructure and construction projects. This position involves a combination of field coordination, technical data review, and project management responsibilities related to the installation and monitoring of instrumentation systems used to measure structural movement, vibration, settlement, and subsurface conditions. The ideal candidate will have a strong engineering foundation, excellent organizational skills, and the ability to work in both field and office environments while coordinating with clients, contractors, and internal teams. Responsibilities: • Review contract documents, project specifications, and drawings to develop instrumentation and monitoring plans., • Coordinate and oversee the installation of monitoring instruments including inclinometers, piezometers, vibration monitors, crack gauges, settlement points, and automated monitoring systems., • Review and analyze monitoring data to identify trends and potential construction-related impacts., • Prepare technical reports, monitoring summaries, and project documentation for clients and project stakeholders., • Assist with development of monitoring thresholds, alert systems, and response procedures., • Coordinate with field technicians, subcontractors, and project managers to ensure timely installation and operation of instrumentation systems., • Conduct site visits to verify instrumentation installations and support construction monitoring activities., • Interface with clients, engineers, and contractors to communicate monitoring results and project updates., • Bachelor’s Degree in Civil Engineering, Geotechnical Engineering, Structural Engineering, or related engineering discipline (required)., • Engineer-in-Training (EIT) certification preferred or ability to obtain within a reasonable timeframe., • 2–5 years of experience in construction, geotechnical engineering, structural monitoring, or related field preferred., • Strong analytical and problem-solving skills., • Proficiency in Microsoft Office (Excel, Word) required; experience with AutoCAD or data visualization tools is a plus., • Excellent written and verbal communication skills., • Ability to manage multiple projects and work in a fast-paced construction environment, • Willingness to perform field work and travel to project sites throughout the New York metropolitan area., • Office-based in Ozone Park, NY, with frequent visits to active construction sites throughout the region., • Combination of office engineering tasks and field coordination activities. We are an Equal Opportunity Employer. This Company is dedicated to both the letter and the spirit of the equal opportunity employment laws. All applicants and all employees will be evaluated based on their ability, competence, and performance of the essential functions of their positions. There will be no discrimination based on race, sex, national origin, religion, age 40 and over, disability, sexual orientation, marital status, or any other classification which federal, state, or local laws may protect. In compliance with the Americans with Disabilities Act, we specifically offer equal opportunity for all employees and job applicants who may have a physical or mental disability. Such persons will be hired based on their ability to perform the essential functions of the job in question. Likewise, their work will be evaluated based on their performance of these essential functions. We will offer reasonable accommodation to individuals with disabilities, to the extent that Company resources allow, without undue hardship. As part of our equal employment policy, there will be no wage differentials based on gender, between men and women employed in the same establishment, on jobs that require equal skill, effort, and responsibility, and which are performed under similar working conditions.

Job DescriptionYU & Associates is seeking a Geotechnical Project Manager in our Elmwood Park, New Jersey Office. You will be responsible for planning, scheduling and execute common to complex projects establishing techniques and standards for analysis and design, coordinating with senior level management, performing mathematical calculations, and training subordinates. The candidate will be managing within an integrated multidiscipline environment and be further responsible for reviewing and certifying the work of staff, performance, managing billings, and maintain strong billability. Duties & Responsibilities: • Perform and oversee engineering calculations and design drawings related to geotechnical work., • Focus on public/private development with regulatory permitting expertise in NJ and PA., • Demonstrated ability to supervise and review others work., • Prepare proposals for professional services., • Perform and direct others with geotechnical inspections, site reconnaissance, soil borings, and field investigations., • Review proposed contracts to determine significant parameters, time schedules and mileposts and define the major task areas., • Resolve problems and coordinate the final turnover of the project to the client, as the primary contact with the client throughout the entire project., • Direct the planning and development of the project scope, procedures, and budget., • Ensure contractual commitments are met and the work is being performed according to the client's instructions., • Maintain effective relationships with members of all divisions and departments responsible for performing services in connection with the project., • Control and/or review all project forecasts, schedules, cost estimates and reports. Responsible for quality control over the complete project; maintain project files., • Monitor fees and budgets; report problems to the appropriate department and division managers., • Review and address health & safety concerns on projects assigned., • Work with the accounting department to keep billings and receipts current and accurate., • Perform other duties as assigned.Requirements:, • B.S. degree in Civil Engineering and M.S. degree with geotechnical specialty (preferred)., • Registered Professional Engineer in New Jersey and/or New York., • Possess 10+ years of geotechnical related regional experience., • Demonstrated ability to develop diverse clients and grow a business., • Proven ability to identify, develop and mentor talent., • Effectively manage projects from concept through completion., • Proven leadership and decision-making skills., • Strong attention to detail with excellent analytical and judgment capabilities., • Excellent communication, interpersonal, report writing, and project management skills., • Excellent listening, written and oral communication skills., • Working knowledge of computers and related geotechnical design software., • Possess a valid driver’s license in good standing., • Ability to establish a vision and create an environment for excellence., • Demonstrated record of ethics and high standards.We offer employees competitive compensation packages, medical/dental/vision, life insurance, short, and long-term disability, paid holidays, paid time off, and 401k retirement plan with company match. YU & Associates' is an Equal Employment Opportunity employer fully committed to providing equal opportunity in all areas of employment practices. No employee or applicant for employment is discriminated against because of race, creed, color, religion, gender, gender identity or expression, sexual or affectional preference, sexual orientation, sex, ancestry or national origin, citizenship status, age, disability, marital or domestic status, veteran status, atypical hereditary cellular or blood trait, genetic information or testing, or any other legally protected category in all employment decisions. We foster a work environment that’s inclusive as well as diverse, where our employees can be themselves. Every idea and perspective are valued to meet our common goals. YU & Associates is committed to supporting our employees’ well-being by providing benefits that are a valuable part of the compensation package. We partner with our employees to foster a healthy, safe and rewarding lifestyle both at work and at home. The Y&A benefits program for full-time employees include: · Benefits: • Medical-National plan with low out of pocket costs to members., • Dental-National plan., • Vision-National plan with the largest vision network., • Life/AD&D-Benefit available should an employee pass away while employed., • Short-Term Disability-Benefit in the event an employee is unable to work for a short period of time., • Long Term Disability-Benefit in the event an employee is unable to work for an extended period., • Employee Assistance Program-Employee 3rd party support available when needed., • ADP Retirement Plan with company match., • Bonus Program – based on individual and company performance., • Yearly review – based on individual and company performance.Tax Savings Tools:, • Healthcare Reimbursement Accounts-Tax Free benefit to employees., • Flexible Spending Accounts-Tax Deductible benefit for employees., • Dependent Care and Commuter Program-Tax Deductible benefit for employees.Value Adds:, • Will Preparation Powered by JazzHR PfGlhljg4P

Job DescriptionYU & Associates, Inc., an awarding winning engineering firm located in Elmwood Park, New Jersey is seeking a Supervising Project Engineer to join our team. The successful candidate will manage aspects of important projects including proposal development, budget, project execution, scheduling and client communications. Participates in conducting engineering investigations and planning work by completing well-defined tasks. These tasks may include collection and analysis of data using established procedures, performance of routine calculations, and participation in evaluating the feasibility of alternate solutions. Requirements/Responsibilities • Bachelor's degree in civil engineering (master's preferred) and a Registered Professional Engineer in the State of New York required., • Minimum of 5 years of experience., • Demonstrated ability to manage multi-discipline projects and utilize technical support staff., • Ability to develop and maintain strong relationships with clients, must possess the desire to develop new clients and expand the services of existing clients while maintaining strong billability., • Record and report all work performed, including deviations from approved work plans, contract documents, poor quality of work, unforeseen conditions, unsafe conditions, etc.;, • Interface with Senior Inspector to maintain and track various logs, reports and field records for the designated area of responsibility., • Monitor the contractor’s timely execution and quality of work., • Interact with contractor’s superintendent for on-site resolution of construction issues., • Review and proof contractor submittals and respond to RFIs., • Prepare proposal cost estimates, technical approach and scope of work write-ups., • Perform review of responses to RFPs for project subcontracts, materials and equipment., • Prepare thorough documentation of site activities, monitor project schedules and subcontractor performance and correct issues when needed., • Assist with preparing project reports, correspondence and cost tracking/status., • Provide technical assistance to engineering oversight staff as required.Qualifications, • Experience in managing large field programs as a team leader is a plus., • Geotechnical analytical and design experience., • Technical report writing skills., • Project and safety management., • Field documentation skills., • Excellent reading, writing, and verbal communication skills., • Strong computer skills., • Field and office assignments, as required.We offer employees competitive compensation packages, medical/dental/vision, life insurance, short, and long-term disability, paid holidays, paid time off, and 401k retirement plan with company match. YU & Associates' is an Equal Employment Opportunity employer fully committed to providing equal opportunity in all areas of employment practices. No employee or applicant for employment is discriminated against because of race, creed, color, religion, gender, gender identity or expression, sexual or affectional preference, sexual orientation, sex, ancestry or national origin, citizenship status, age, disability, marital or domestic status, veteran status, atypical hereditary cellular or blood trait, genetic information or testing, or any other legally protected category in all employment decisions. We foster a work environment that’s inclusive as well as diverse, where our employees can be themselves. Every idea and perspective are valued to meet our common goals. YU & Associates is committed to supporting our employees’ well-being by providing benefits that are a valuable part of the compensation package. We partner with our employees to foster a healthy, safe and rewarding lifestyle both at work and at home. The Y&A benefits program for full-time employees include: · Benefits: • Medical-National plan with low out of pocket costs to members., • Dental-National plan., • Vision-National plan with the largest vision network., • Life/AD&D-Benefit available should an employee pass away while employed., • Short-Term Disability-Benefit in the event an employee is unable to work for a short period of time., • Long Term Disability-Benefit in the event an employee is unable to work for an extended period., • Employee Assistance Program-Employee 3rd party support available when needed., • ADP Retirement Plan with company match., • Bonus Program – based on individual and company performance., • Yearly review – based on individual and company performance.Tax Savings Tools:, • Healthcare Reimbursement Accounts-Tax Free benefit to employees., • Flexible Spending Accounts-Tax Deductible benefit for employees., • Dependent Care and Commuter Program-Tax Deductible benefit for employees.Value Adds:, • Will Preparation Powered by JazzHR 1ud1ZGwSEW

Job Description About the Role The Engineering group at AKRF is seeking a Geotechnical Engineer to be based out of New York City. The potential candidate will have the opportunity to work in an environment of encouragement and collaboration to help AKRF shape the future of our communities. Job Responsibilities: • Providing geotechnical oversight and logging of geotechnical explorations (borings, test pits, CPTs);, • Developing laboratory and field testing programs;, • Preparing engineering reports, including the evaluation of collected field and laboratory results, preparation of figures and drawings;, • Preparing engineering analyses for slope stability, settlement and consolidation estimates, deep foundation design (compressive, uplift, and lateral capacities), mat foundation design, ground surcharging, and ground improvement techniques (soil grouting, ground freezing, etc.), and soil liquefaction;, • Management of multiple projects (prior project management skills a plus);, • Working knowledge and related field experience regarding foundation-related construction in urban areas;, • 8-12 years’ experience, • Bachelor’s degree in civil engineering (a master’s degree with a concentration in Geotechnical Engineering is a plus)., • Engineer-In-Training Certificate, • NYS PE licensure preferred, PE licensure in other states will be required to obtain NYS licensure within 6 months of hire., • Required to travel to work sites in New York City, Long Island, the Hudson Valley, Connecticut and New Jersey, with work being performed Monday through Friday with the possibility of occasional overtime, evening, and weekend work., • OSHA 10-hr or 40-hour HAZWOPER training a plus. Compensation will range from $120k to $150K, and commensurate with experience. Why Work at AKRF Founded in 1981, AKRF is an award-winning consulting firm with 400 planners, engineers, designers, economists, ecologists, geologists, historians, archaeologists, acousticians, and many other types of professionals guided by the belief that to be original is to be transformative. Professionals join and remain at AKRF for our corporate-casual environment that values flexible work schedules and locations, and balances award-winning projects with social impact initiatives, charitable giving, and plenty of fun and games. We foster a diverse, equitable, and inclusive environment where employees are respected and valued in honor of their identities; we strive to deliver on this promise every day. Our cookie exchanges and ice cream socials are quite the treat. What We Offer We provide employees with a benefit package that reflects our respect for your workplace contributions, professional goals, and personal priorities. The benefits program at AKRF includes: • Medical, Dental, Vision insurance, • Vacation and Sick time, • Flexible work schedules and locations, • 401(k) retirement plan with employer matching, • Additional Voluntary Life Insurance, • Short- and Long-Term Disability, • Stock Ownership, • Tuition Reimbursement, • Training and professional development courses, • Opportunities for community outreach through internal networks, • Charitable donation match AKRF enforces a policy of equal employment opportunity in our daily operations. The firm has a demonstrated history of hiring, training, developing, promoting and retaining minority group members and women. All employment-related decisions are based solely on relevant criteria and without regard to race, color, religion, age, sex, pregnancy, national origin, age, physical or mental disability, marital status, sexual orientation, sexual identity, caregiver status, military/veteran status or citizenship status, or any other character

Job Description Geotechnical Project Engineer/Manager to join its collaborative team in New York City, White Plains, or Melville, Long Island. This individual will serve a key function in providing geotechnical engineering expertise through geotechnical analysis and design, and efforts that support management of projects, supervision of staff engineers, and interfacing with clients. In this role, you will have the opportunity to partner cross-functionally on both small-scale and large-scale geotechnical projects primarily in office, residential, and retail\warehouse markets. Job Responsibilities • Perform complex analyses, structural design of pile elements and underpinning systems, and special engineering inspections;, • Prepare technical documents and manages the preparation of the proposals, reports, construction documents, and construction-related correspondence associated with the projects managed;, • Supervise field investigations, and conventional earthwork and foundation construction activities;, • Perform and manage multiple projects and tasks within specific budgets, schedules, and deadlines. Plans, schedules and develops task and project budgets. Prepare progress reports, draft change orders, draft invoices, and project billings;, • Bachelor's degree in Civil or Geotechnical Engineering; Master's degree with Geotechnical emphasis;, • Professional Engineer licensure;, • 6+ years of related Geotechnical experience;, • 3+ years of field experience with geotechnical investigations and construction observation experience including: mass grading, deep foundations, subgrade for footings, ground improvement, and excavation support including tieback installation and testing;, • Proven experience in preparing technical reports, specifications, construction plans, and geotechnical recommendations; writing proposals; running/coordinating projects; managing clients; managing billings; and reviewing the work of staff and mentoring staff;, • Strong understanding of codes and other regulatory requirements;, • Knowledge of quantitative/technical analyses and related software;, • Possess an entrepreneurial and professional demeanor, as well as strong written, verbal, and presentation communication skills;, • Desire and ability to seek out new business opportunities and develop additional clients while maintaining project workload;, • Ability to coach and assist with the management of staff;, • Demonstrated ability to work with staff, clients, and regulatory agencies;, • A collaborative team player with excellent interpersonal and social skills; and, • Possess reliable transportation for client meetings and job site visits and a valid driver's license in good standing.

Job Description Join a well-estalbished, fast-growing company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI engages its employees in all aspects of its projects and encourages them to participate in design and project management functions to their full potential. SESI Consulting Engineers has been selected as one of NJBIZ’s 2020 Fifty "FASTEST GROWING" Companies! SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Pine Brook, N.J. SESI has earned an excellent reputation for providing innovative geotechnical, site/civil, and environmental engineering solutions for owners, developers, and the construction industry in the NJ, NY, CT region. SESI is currently expanding to meet the needs of existing clients. We offer a competitive compensation and benefit package to include health, dental, vision insurance, retirement plan, paid time off, tuition reimbursement, professional development assistance, bonus potential, just to name a few. Summary SESI seeks an Assistant Project Engineer to work in its Site/Civil Department. This individual will serve a key function in helping design commercial, residential, mixed-use, and industrial developments. In this role, you will have the opportunity to work in a dynamic, collaborative environment. Essential Duties and Responsibilities include the following. Other duties may be assigned. · Prepare and update various engineering documents such as reports, specifications, plans, construction schedules, cost estimates and design plans for projects using AutoCAD Civil 3D and associated software packages. · Use reports, maps, drawings, engineering plans, tests, and aerial photographs to assess soil composition, terrain, hydrological characteristics, and topographical and geologic data and their impact on the planning and design of projects. · Familiarity with current local, state (New Jersey and New York), and Federal Permitting regulations · Must be willing to work in the field as necessary; · Position requires work Monday through Friday with occasional evenings and weekends; and Performs other duties as requested Supervisory Responsibilities This job has some supervisory responsibilities. Qualifications - To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to review and understand plans, specs, and reports including site, grading, utility, foundation, details, structural, drawings, architectural, grading, federal, state and local regulations. Education and/or Experience · Bachelor of Science in Civil Engineering; · 4-8 years of prior relevant professional experience in site/civil design, including site planning, grading, stormwater management, and erosion control measures; · Excellent written and verbal communication skills; · Proficient in AutoCAD and Civil 3D; · Strong attention to detail with excellent analytical, multitasking, and judgment capabilities; · Reliable transportation to access job sites with a valid driver’s license in good standing; and · Demonstrated ability to follow direction and work in a collaborative team environment Certificates, Licenses, Registrations · FE/EIT certification required; PE desired; · Valid Driver’s License and possess reliable transportation to access job sites Language Skills Proficient in communicating both verbal and written in the English language. Proficient in communicating both verbal and written in the English language. Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to write speeches and articles for publication that conform to prescribed style and format. Ability to effectively present information to top management, public groups, and/or boards of directors. Mathematical Skills Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Computer Skills Proficient or familiarity with AutoCAD, Autodesk Civil 3D, NitroPro, GSLOPE, KeyWall, Rocscience, MS Word, Excel, Adobe. Tools/Equipment Position requires ability to use tools such as a lump hammer, shovel, hand auger, Nuclear Density Gauge. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting. Approximately 25% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Base salary $75,000–$95,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Coordinates the planning, organization, control, integration, and completion of engineering projects within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. This staff position is considered a training position for those with degrees in a related field but with limited to no field experience. Essential Duties and Responsibilities include the following. Other duties may be assigned • Conducts site inspection to monitor progress/conformance to specs and procedures, • May be expected to design portions of a project, • Makes calculations, using engineering formulas and skills, • Instructs drafters how to reduce designs into completed drawings, • Conducts routine geotechnical engineering laboratory checks, • Leads concrete and rebar inspection testing, • Performs research and writes reports, • Prepares samples of unapproved materials for laboratory testing, • Uses computer to run standard programs to solve engineering problems, • Performs routine laboratory tests to determine various design parameters, • Plans and implements engineering programs, including defining the project philosophy, activities, milestones, and staff requirements, per customer requirements, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, and bid packages, • Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications, • Coordinates activities concerned with technical developments, scheduling, and resolving engineering design and test problems, • Prepares interim and completion project reports, • Provides status and progress reports to customer, project team, and management, • Classifies soils according to standard types, • Applies geological knowledge to engineering problems encountered in construction projects, such as dams, tunnels, and large buildings, • Prepares geologic reports and maps, interprets research data, and recommends further study or action, • Conducts or participates in environmental studies and prepares environmental reports, • Directs drilling of exploratory borings and wells, • Oversees installation of monitoring wells in accordance with state and federal requirements, • Collects or supervises collection of soil and groundwater samples for analysis of chemical composition, • Determines direction of groundwater flow based on review of historical records and site specific data, • Determines the nature and extent of contamination in soil and groundwater at environmental sites, • Participates in decision making regarding research priorities and provides information on feasibility of prospective projects, • May lead junior level staff and interns by providing guidance, answering questions and being a resource to them, • May direct tasks, other junior level staff and interns as needed, • Identifies the potential for new projects and seeks opportunities to promote the company’s services on an ongoing basis, • Travels 25% (Site) to 100% (Geotechnical/Environmental) of the time which may be out of state Supervisory Responsibilities: This job has some supervisory responsibilities. Qualifications: • Ability to review and understand plans, specs, and reports including site, grading, utility, foundation, details, structural, drawings, architectural, grading, federal, state and local regulations., • Bachelor’s degree in Civil Engineering with a minimum of 0 to 3 years of Site Civil, Geotechnical or Environmental engineering experience. Previous Internship or construction experience is preferred., • Experience with inspection of compacted fills, footings, ground improvement, deep foundations, retaining walls, utilities, asphalt, concrete, sitework elements., • 40-hour OSHA HAZWOPER certification, • Engineer in Training (EIT) preferred or have the ability to become registered within six months., • ACI/NICET/NJ DCA Special Inspector and Nuclear Densometer certification a plus, • Valid Driver’s License and possess reliable transportation to access job sites, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry., • Able to apply concepts such as fractions, percentages, ratios, and proportions to practical situations., • Proficient or familiarity with AutoCAD, Autodesk Civil 3D, NitroPro, GSLOPE, KeyWall, MS Word, Excel, Adobe. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is frequently required to stand; walk and sit. The employee must frequently lift and/or move up to 50+ pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually moderate to high. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Approximately 25% to 100% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $55,000–$80,000 + overtime, mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Assists in the conduct of civil, environmental, and geotechnical engineering related services, • Performs tasks to make Staff Engineer/Associates more efficient, • Assists with inspection of compacted fills, utilities, asphalt, concrete, sitework elements, • Experiments with new growth strategies and ideas to develop technical skills, • Conducts geotechnical engineering laboratory tests, • Prepares samples of materials for laboratory testing, • Performs research and data entry, • Identifies the potential for new projects and seeks opportunities to promote the company’s services on an ongoing basis, • Must have strong attention to detail with excellent analytical and willing to spend the majority of work hours in the field., • BS in Civil Engineering or related field with a Minimum cumulative GPA 3.0., • Excellent written and verbal communication skills., • Valid Driver's License and possess reliable transportation to access job sites., • Able to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Able to apply concepts of basic algebra and geometry., • Proficient or familiarity with AutoCAD, NitroPro, MS Word, Excel, Adobe. While performing the duties of this Job, the employee is frequently required to stand; walk and sit. The employee must frequently lift and/or move up to 50+ pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually moderate to high. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Approximately 25% to 75% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Hourly Rate: $17/hr. -$21/hr., + overtime & mileage reimbursement.

Job Description Snipebridge, a strategic talent solutions company specializing in connecting exceptional talent to great career opportunities in the Architecture & Planning industry, is seeking a Supervising Engineer -Water Resources. Our client is an ENR Top 500 Design firm focused on geotechnical, environmental, water, ecological, and construction management services that has been delivering exceptional services for more than six decades. Their multidisciplinary team tackles intricate projects in diverse industries such as transportation, energy, infrastructure, and development. The firms long-standing commitment to technical excellence and client satisfaction has fueled their growth and success. They offer a collaborative and dynamic work environment where talented individuals can thrive and contribute to impactful projects. Position Summary This key position demands strong client-facing skills alongside the ability to lead and mentor staff-level engineers. A critical aspect of the role involves partnering with the firms dams/levees/water resources Practice Leaders to actively develop and expand our market footprint within New Jersey, New York, and Pennsylvania. Primary Responsibilities: • Supervising and scheduling geotechnical and structural engineering staff and providing technical direction and oversight., • Senior project management of interdisciplinary teams of geotechnical, structural, hydrologic/hydraulic, and civil engineers; to include, scheduling and supervising project meetings, producing and managing project schedules and budgets., • Managing and reviewing the preparation of construction plans and technical specifications., • Supervising and reviewing dam and/or levee safety inspections., • Providing leadership/mentoring to technical staff., • Managing and tracking budgets, creating project invoicing and Client follow-up, • Communicating effectively and efficiently with team members, clients and contractors., • Interacting with clients and regulatory agencies., • Preparing technical and cost proposals., • Supervising fieldwork including test borings and instrumentation installations and construction monitoring for dam and levee rehabilitation projects., • Providing data analysis, organization, and interpretation in support of dam/levee inspections, evaluations, and rehabilitations projects., • Executing and/or supervising engineering analyses including seepage and slope stability analyses of embankment dams and levees, drainage and filter designs, gravity dam stability analyses., • Writing and/or reviewing field reports, inspection/engineering reports, and permit applications. Education/Skills/Experience: • B.S. in Civil Engineering or related field of practice is required. Master’s Degree with a Geotechnical focus is a plus., • Professional Engineer license in NJ with the ability to obtain PE in NY and PA., • 15 to 20 years of experience in civil – geotechnical engineering, with direct involvement in dam safety inspections, condition assessments, subsurface exploration programs, engineering analyses, dam rehabilitation design, and regulatory permitting., • Experience completing projects with public sector/municipal agencies in New Jersey, New York and Pennsylvania is highly preferred., • Proven experience with design and development of engineering technical specifications, cost estimating and other related bidding documents., • Strong interpersonal skills and ability to speak publicly., • Solid project financial management skills; knowledge of production support systems and personal computer proficiency are all required competencies., • Experience in providing technical and project leadership to staff-level or junior engineers., • A strong background using various geotechnical computer software such as SEEP/W, SLOPE/W, and finite element analysis software such as PLAXIS are preferred., • Knowledgeable of dam and levee safety guidelines utilized by the U.S. Army Corps of Engineers, Bureau of Reclamation, Federal Energy Regulatory Commission, Natural Resource Conservation Service, and other Federal agencies, as well as State Dam Safety agencies. All applicants must be legally authorized to work in the United States without sponsorship and must already possess long-term work authorization.

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Inspects and oversees construction of buildings, dams, utilities, walls, pavement, and other types of construction work to ensure that procedures and materials comply with plans and specifications by performing the following duties. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Conducts pile inspections, inspections of deep dynamic compaction process, • Observes compacted fills (including use of nuclear density gauges), • Observes utility installation, concrete testing and rebar inspection, • Measures distances to verify accuracy of dimensions of structural installations and layouts, • Performs inspections of deep dynamic compaction process, • Verifies levels, alignment, and elevation of installations, • Observes work in progress to ensure that procedures are followed and materials used conform to specifications, • Prepares samples of materials for laboratory testing and performs the tests, • Examines workmanship of finished installations for conformity to standard and approves installation, • Interprets blueprints and specifications for Contractor and discusses deviations from specified construction procedures to ensure compliance with regulations governing construction, • Records quantities of materials received or used during specified periods, • Maintains daily logs of construction and inspection activities and completes daily progress reports, • Prepares sketches of construction installations, • Participates in environmental audits and prepare data summaries, data tables, data mapping and presentation, and preparation of environmental reports, • Follows blueprints, guidelines, and/or diagrams, • Responsible for the operation and maintenance of equipment, • Assists environmental engineers in the development of remediation devices, • Classifies soils according to standard types, • Examines rocks, minerals, and fossil remains to identify and determine sequence of processes affecting development of earth, • Applies knowledge of chemistry, physics, biology, and mathematics to explain these phenomena and to help locate mineral, geothermal, and petroleum deposits and underground water resources, • Applies geological knowledge to engineering problems encountered in construction projects, such as dams, tunnels, and large buildings, • Prepares geologic reports and maps, interprets research data, and recommends further study or action, • Conducts or participates in environmental studies, • Directs drilling of exploratory borings and wells, • Oversees installation of monitoring wells in accordance with state and federal requirements, • Collects or supervises collection of soil and groundwater samples for analysis of chemical composition, • Determines direction of groundwater flow based on review of historical records and site specific data, • Performs environmental soil sampling, • Prepares summary and certification letters and reports, • Conducts pile and deep foundation inspections, • Inspects ground improvement, • Observes borings, test pits, geoprobes and cone penetrometer tests, • Conducts permeability testing and well monitoring, • Prepares project cost estimates, proposals, reports and mentors junior staff, • Works under general supervision with latitude for independent judgment, • Displays moderate skills with high level of proficiency, • Adheres to environmental, construction and OSHA safety policies and procedures to be in compliance with local, state, and federal environmental regulations, • Consults with senior peers on certain projects, • Identifies the potential for new projects and seeks opportunities to promote the company’s services on an ongoing basis This job has some supervisory responsibilities. Qualifications - To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to review and understand plans, specs, and reports including site, grading, utility, foundation, details, structural, drawings, architectural, grading, federal, state and local regulations. Education and/or Experience Preferred Bachelor's degree from four-year college or university; or one to four years related experience and/or training with HS Diploma or GED; or equivalent combination of education and experience. Experience with inspection of compacted fills, footings, ground improvement, deep foundations, retaining walls, utilities, asphalt, concrete, sitework elements. Certificates, Licenses, Registrations 40-hour OSHA HAZWOPER certification ACI/NICET/NJ DCA Special Inspector and Nuclear Densometer certification a plus Valid Driver’s License and possess reliable transportation to access job sites Language Skills Proficient in communicating both verbal and written in the English language. Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to write speeches and articles for publication that conform to prescribed style and format. Ability to effectively present information to top management, public groups, and/or boards of directors. Mathematical Skills Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Computer Skills Proficient or familiarity with AutoCAD, Autodesk Civil 3D, NitroPro, GSLOPE, KeyWall, Rocscience, MS Word, Excel, Adobe Tools/Equipment Position requires ability to use tools such as a lump hammer, shovel, hand auger, Nuclear Density Gauge. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting Approximately 100% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Base salary $50,000–$70,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job DescriptionJob Title: Civil Engineer Please book a time to meet with me: Job Description This role involves working as a Civil Project Engineer, collaborating across various segments including Environmental, Civil, Geotechnical, and Architecture. The position focuses on site civil and land development projects, encompassing the design of site layouts, grading, stormwater management, utilities, soil erosion, sediment control measures, landscaping, lighting, and project management. Responsibilities also include zoning and land development permitting, field inspection, hydraulic and hydrologic design and analysis, site plan drafting, environmental impact assessment, and preparation of project documents. Responsibilities • Design site layouts and grading plans., • Manage stormwater and drainage design projects., • Develop utilities and soil erosion and sediment control measures., • Coordinate landscaping and lighting plans., • Oversee project management tasks, including zoning and land development permitting., • Conduct field inspections and collaborate on hydraulic and hydrologic design and analysis., • Draft site plans and conduct environmental impact assessments., • Minimum of 3 years experience with stormwater management, site and grading design, zoning, and site plan permitting., • Proficiency in AutoCAD with at least 3 years of experience., • Experience in land surveying and development projects for at least 3 years., • At least 2 years of experience using Civil 3D for site civil projects., • Experience with Hydrocad is a plus., • EIT certification is advantageous., • Experience with Carlson is beneficial. The work environment offers a very open and collaborative office space with remote flexibility depending on the position. There is constant communication with team members, fostering a supportive and team-oriented atmosphere. The company is known for its competitive salary, quarterly performance-based bonuses, end-of-year bonuses, and opportunities for upward mobility and career growth. They provide great mentorship, invest in their employees, and offer travel reimbursement. The firm specializes in site/civil/traffic engineering consulting, permitting, expediting, construction administration, landscape architecture, and planning across various regions, including the northeast, mid-Atlantic, south, and Midwest. Job Type & Location This is a Permanent position based out of New York, NY. Pay and Benefits The pay range for this position is $70000.00 - $130000.00/yr. Medical Plans (via Aetna): PPO Plus: Lower deductible ($600 individual / $1,200 family), copays for office visits, and prescription coverage. HDHP with HSA: Higher deductible ($1,900 individual / $3,800 family), but includes a Health Savings Account (HSA) with tax advantages. Dental: Delta Dental Plan. Vision: VSP Vision Plan. Telemedicine: Available through Aetna and MyAdvocate. Mental Health: Inpatient and outpatient services covered. Additional Coverage: Critical illness, accident, hospital indemnity, and identity protection insurance 401(k) Profit Sharing Plan: Available immediately upon hire. Vesting: Details not specified, but typically phased over several years. Stock Purchase Plan: Available after 90 days. Profit Sharing Trust Retirement Plan: Available within one year, depending on hire date Health Care FSA Dependent Care FSA Limited Purpose FSA (for HSA participants) Health Savings Account (HSA): Available with HDHP plans Vacation & Sick Pay Holidays Birth & Bonding Leave Jury Duty & Funeral Pay Workplace Type This is a fully onsite position in New York,NY. Application Deadline This position is anticipated to close on May 8, 2026. Diversity, Equity & Inclusion At Actalent, diversity and inclusion are a bridge towards the equity and success of our people. DE&I is embedded into our culture through: • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.