Industrial safety jobs in Westfield, NJ - Page 2Create job alerts

Aries Clean Technologies builds, owns, and operates sustainable, industrial-scale waste disposal facilities serving municipal biosolids clients. Our technology recovers the energy in biosolids waste while destroying harmful “forever chemicals” such as per- and polyfluoroalkyl substances (PFAS), resulting in greener, healthier communities. Our mission is to lead the way in sustainable waste management by leveraging our proprietary gasification technology to convert biosolids into renewable energy and valuable byproducts. Our purpose is clear: To provide innovative, environmentally friendly solutions that address the challenges of biosolids waste disposal. We aim to create a positive impact on the environment and the communities we serve by reducing pollution, promoting sustainability, enhancing public health, and supporting economic growth. Today, Aries Clean Technologies is poised to make a lasting impact. With our first commercial scale biosolids gasification facility in Linden, NJ, we are on track to open three additional plants within the next four years. Our continued growth and innovation reflect our unwavering commitment to creating a cleaner, healthier future for all. Job Description Aries Clean Technologies has constructed and commissioned an integrated domestic biosolids gasification facility at its site in Linden, NJ. The plant consists of four plant unit operating systems, i.e., a biosolids drying plant, a fluidized bed gasifier, heat generation and recovery plant and an emission control unit. Aries is seeking to hire a Maintenance Technician reporting directly to the Maintenance Manager. The position will be responsible for installing, calibrating, repairing, adjusting, inspecting, and performing preventative maintenance on plant equipment. Tasks are performed in accordance with established policies and procedures under the general supervision of the Maintenance Manager. Position may require occasional travel for training and support of other company projects. Key Responsibilities and Important Duties • Execute plant equipment lock-out, tag-out policy and procedures to the highest level of safety standards., • Troubleshoot, maintain, and repair mechanical equipment such as: conveyors, fans, pumps, valves, dampers, hydraulic and pneumatic devices, and plant support equipment., • Install, modify, and upgrade mechanical equipment, • Perform greasing, oil changes and oil sampling., • Perform cleaning of various plant equipment as required., • Participate in Continuous Improvement projects, • Assist with or conduct Root Cause Analysis of failed equipment., • Act as a point of contact for third-party maintenance performed by contractors ensuring adequate task performance and job closeout., • Assist with the development or modification of job plans for both preventative and corrective maintenance work., • Read and understand job plans, manuals, schematics and P&IDs., • Ensure adequate controls of plant inventors associated with spare parts and plant tools., • Coordinate the stopping and starting of equipment as required for repairs and adjustments, • Ensure plant equipment operates within design parameters while complying with strict HSE rules and regulations as well as company policies and procedures., • Perform record keeping functions such required., • Able to operate typical equipment associated with the operation and maintenance of a process facility, including mobile equipment, power tools, etc., • Contribute to an effective maintenance team by supporting planning and following a maintenance schedule., • Coordinating with other onsite personnel for overall plant health and maintenance support., • Perform maintenance duties as required to maintain or restore plant operation, adjusting schedules as needed to attain target maintenance schedule metrics., • Contribute to the development and updating of maintenance procedures and training manuals based on plant knowledge and experiences., • Build and maintain positive working relationships with co-workers, LRSA employees and the public using principles of good customer service., • Possess the ability to clearly speak, understand, and write in English to communicate effectively in both verbal and written contexts., • Attend and participate in all assigned training and safety meetings., • Maintain tools, machinery, and work areas, keeping them clean and operational. Job Requirements • Minimum high school diploma or GED. Process Plant Technology Degree or Vocational Maintenance Degree preferred., • 5+ years working experience in operating facilities or related industries with one or more of the following processes: solids handling and solids processing, power generation, wastewater treatment, materials drying, gas processing., • Prior troubleshooting and repair experience with mechanical systems in an industrial environment., • Ability to work weekends, overtime, or holidays as needed., • Knowledge of reading and interpreting P&IDs, • Excellent communication skills., • Works well with others and is a team player., • Excellent innovative problem-solving skills, • Ability to recognize and resolve unusual, inefficient or dangerous operating conditions through good maintenance practices., • Knowledge of plant environmental regulations and compliance requirements., • Ability to think holistically and creatively to introduce unique solutions to problems., • Ability to operate aerial lifts, scissor lifts and/or other related equipment required for support of routine maintenance tasks., • Skilled in rotating equipment troubleshooting and repair, • Experience with basic operation of plant equipment (e.g., process pumps, motors, belt drives, gearboxes, valves and compressors). Working Conditions and Personal Attributes • Safety conscious attitude; knowledgeable in appropriate use of personal protective equipment (PPE), • Must be able to function well in a fast-paced environment under demanding deadlines and changing priorities and conditions., • Ability to cover odd shifts and work overtime as required by upset conditions or planned downtime., • Ability to work in an outdoor plant environment and around operating equipment., • Ability to climb equipment ladders to access elevated platforms in a vertical plant., • Comfortable with prolonged periods standing and walking., • Ability to multi-task, maintain flexibility and work independently with minimal supervision., • Capable of lifting objects weighing up to 50 pounds, • Effective written/verbal communication, • Able to stoop, kneel, crouch, or crawl., • Assertive self-starter who takes initiative, is versatile, and possesses a service-oriented mentality, • Self-motivated to accomplish the individual and company goals and objectives, • Required to use personal protective equipment as required by site or regulatory policy and procedure., • Collaborative team member (e.g. ability to contribute as a team member through a positive “can-do” attitude)., • Occasional operation of mobile equipment (aerial lift, scissor lift, etc.), • Willing to work shift work. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. The contents of this description are not intended to be construed as an exhaustive list of all responsibilities, duties, skills required of personnel so classified. It is the policy of this organization to provide equal employment opportunities to all qualified applicants without regard to race, creed, color, national origin, sex, age, disability, marital status, sexual orientation, gender identity, genetic information, citizenship status, religious preference, or veteran status in all phases of the employment process and in compliance with applicable federal, state, and local laws and regulations.

Job Description AMEC Electric is seeking responsible, dedicated and reliable journeyman electricians to bring their talents to work with us. Are you looking for a career with an established company? Are you willing to do whatever it takes to bring your career to the next level and join our team? Responsibilities: • High quality new installations of conduit, cable tray, wiring and equipment., • Efficient and safe service and repair of existing electrical equipment., • Neat appearance., • Good customer manner., • Able to work independently and with a team., • Must have a minimum of 4 years practical electrical field experience., • Knowledgeable of NEC codes and industry standards, • Understanding of NFPA 70E, • Trained, skilled and resourceful and able to use all tools and equipment., • Strong problem solving and critical thinking skills, • Strong understanding of electrical installation "means and methods"., • Valid Drivers LicenseCompany DescriptionCommercial and Industrial Electrical Contractor serving Central and Northern NJCommercial and Industrial Electrical Contractor serving Central and Northern NJ

Job Description • We have an opening for full time MECHANIC I positions., • Location: L'Oreal - 30 Terminal Avenue, Clark, NJ 07066. Note: online applications accepted only., • Schedule: Full time schedule; Monday through Friday. Hours may vary. More details upon interview., • Requirement: Prior building maintenance systems experience and low pressure boiler license are preferred., • Pay Range: $25.00 per hour to $35.00 per hour. ESFM is the corporate Integrated Facilities Management (IFM) division of Compass Group USA and a Keystone member of the International WELL Building Institute (IWBI). We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1430067. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: Rooted in hospitality, ESFM elevates the workplace experience as the single source of innovative FM solutions that ensure a safe, healthy, and sustainable environment. ESFM’s clients include many household names from Life Science, Technology, Oil & Gas and Manufacturing markets. ESFM self-performs 80% of all IFM solutions provided to clients. Their portfolio of service categories includes Environment, Health & Safety, Facilities Maintenance & Engineering, Sustainability, Janitorial & Industrial Cleaning, Laboratory Support and Workplace solutions. This self-performance model creates a consistent hospitality experience for clients, resulting in higher engagement and productivity from their employees. In 2020, ESFM (formerly Eurest Services) won the George Graves Award for Facility Management Achievement from the International Facilities Management Association (IFMA). Job Summary Summary: Operates and maintains all equipment, including HVAC systems, high-pressure boilers, generators and steam equipment. Reads and records information from meters and gauges at specified intervals to verify operating conditions. Essential Duties and Responsibilities: • Provides quality customer service by providing one-on-one attention to detail., • Responds to dispatch calls for machine repairs using company vehicle., • Calls on existing customers to determine adequacy of service; listens to and resolves service complaints., • Visually inspects and listens to machines to identify causes of malfunctions; dismantles machines to gain access to problem area., • Inspects parts to detect wear, misalignment or other problems; removes and replaces worn or defective parts; repairs broken parts; realigns and adjusts components; tests machine operation following repair., • Reviews inventory and orders parts; ships and receives machines and equipment; maintains equipment inventory., • Sets up and operates mechanical equipment and small hand tools (e.g., drills, grinders welding torches) for machine and equipment repair., • Maintains clean and safe work environment; performs job safely., • Consistently demonstrates support of the department by striving for excellence., • Contributes to the team; exhibits professionalism with customers, fellow employees and others., • Performs other duties as assigned. Qualifications: Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here for paid time off benefits information. About Compass Group: Achieving leadership in the foodservice and facility management industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. ESFM maintains a drug-free workplace. ESFM

General Laborer ? Responsible for general duties involving physical handling of product, materials, supplies and equipment.Maintain orderly and clean work area in compliance with Company safety and sanitation requirements.Operate industrial power equipment.Restock and replenish as appropriate.Ensure

Job DescriptionDescription: Security Officer in Kenilworth, NJ Sora Required Introduction Established in 1918, Guardian Service Industries is a 4th generation family-owned Janitorial, Security, Pest Control, and Engineering & Operations staffing corporation. We provide a comprehensive range of essential facility management services to over 1,000 clients across various sectors, inclusive of commercial and government buildings, residential communities, schools, industrial facilities, transportation hubs, and retail outlets throughout the East Coast and New England. The Role: Most/all of the following service tasks are to be completed daily depending on your role. Responsibilities and Skills: • Positively interact with residents, guests, and vendors while assisting with day-to-day requests and resolving complaints, • Communicate with building management and other staff to ensure smooth daily operations, • Log and keep track of both concierge and building keys for resident use or move-in/move outs, • Maintain safety and security of the building, including monitoring security cameras, responding to emergencies and concerns promptly and efficiently, and exercising great judgement including escalating issues immediately, • Handle package deliveries, including logging and distributing, as well as external vendor deliveries, • Maintain accurate and complete shift logs ensuring proper "handover" for successful communication through shift changes, • Conduct patrol of the site interior and perimeter to identify potential security and safety risks or undesirable conditions. Evaluates situations and makes logical decisions on how to proceed and direct work., • Coordinate expedient responses to emergency conditions, including fires, safety hazards and threats to life and/or property in a calm, rational and persuasive manner. Handles undesired conduct, violations of building policy and civil laws as warranted for the security and safety of guests, employees, patrons and property., • Maintain surveillance and reporting of any suspicious persons and/or packages., • Execute a number of comprehensive and integrated security measures and countermeasures, • Must be able to adapt physically and to the changing needs and priorities of the site., • Additional requirements are dependent on each building and location Guardian Service Industries is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to, among other things, race, religion, color, national origin, sex, age, marital status, sexual orientation, gender identity, pregnancy, citizenship, status as a protected veteran, or status as a qualified individual with a disability, or any other characteristic protected by applicable law. Guardian Service Industries is committed to integrity, excellence, and diversity among its employees. Our company participates in E-Verify to confirm employment eligibility. Requirements:

Job Description EPC Services Company, a leading power/utility engineering consultant and construction firm, has immediate openings for full-time Project Managers in Billings, MT. This position is a professional project management position for individuals with strong skills related to the proactive and effective management of the construction for high/medium-voltage power delivery projects. The position of project manager is an essential role in the organization. The project manager provides critical leadership and management in the execution of Engineering, Procurement and Construction of turnkey projects (EPC). Functions include program management for large clients, EPC project schedule management, scope definition and change management, management of structured project communications, project financial controls, bidding/proposal responses, procurement/purchasing, safety management, direction of field construction, general administration, and training/mentoring of assistant project managers. This position reports directly to the branch manager/Senior Project Manager. Assistant project managers may be assigned to work with a Project Manager depending on the program or project requirements. Occasional travel may be required for the monitoring and control of construction projects. Minimum Requirements: Bachelor of Science in Electrical Engineering, Electrical Engineering Technology, or Construction Management and 5+ years' project management experience with complex projects over $5MM, or a combination of education and experience of high-voltage electrical systems; prior experience in electrical design of substations / switchyards a plus. Excellent organizational skills; strong written and verbal communication skills; working knowledge of Microsoft Office software applications including Excel, Word, Outlook, Teams, and SharePoint; experience with Vista (Viewpoint) software a plus. The successful applicant may be subject to client-mandated drug and background checking. Occasional travel/driving is required; therefore, the successful applicant will be subject to EPC Services' auto insurance carrier requirements. Applicants must not require sponsorship for employment visa status (e.g., H-1B visa status) now or in the future. Salary commensurate with experience and education. Benefits include: • Medical, dental and vision insurance, • Flexible spending account, • Health savings account, • Life insurance, • Disability insurance, • 401(k), profit sharing and employee stock ownership plan, • Paid vacation, personal days, and holidays, • Paid Parental Leave An Equal Opportunity Employer Job Posted by ApplicantPro

Job Description EPC Services Company, a leading power/utility engineering consultant and construction firm, has immediate openings for full-time Senior Project Managers in our Madison, WI office. Consideration for a remote-work arrangement will be based on a candidate's level of industry experience in Project Management. This position is a senior professional project management role for individuals with advanced skills related to the strategic planning and management of the construction for electrical power, communications, and industrial facilities, including civil, structural, and mechanical disciplines. A senior project manager is a key resource to general and executive managers in providing insight and counsel on high-level business management decisions. Senior Project Managers are an essential role in the organization. It provides critical leadership and management in the execution of Engineering, Procurement, and Construction turnkey projects (EPC). Its functions include program management for large clients, general project management, project financial, bidding, safety, field support, general administration, and training/mentoring of Project Managers and Assistant Project Managers. This position typically reports directly to the Branch Manager however, they may be reporting to the General Manager, Vice President, or President directly depending on the client and the project that they are managing. Assistant Project Managers and Project Managers may be assigned to work with a Senior Project Manager depending on the program or project requirements. Occasional travel may is required for the monitoring and control of construction projects. Minimum Requirements: Bachelor of Science in Electrical Engineering, Electrical Engineering Technology, or Construction Management and a minimum of 10 years' project management experience with complex projects in transmission line or substation construction or a combination of education and experience of high-voltage electrical systems; prior experience in electrical design of substations / switchyards a plus. Excellent organizational skills; effective written and verbal communication skills. Proficiency with Microsoft Excel including basic spreadsheet structure, formatting, conditional formatting, shortcuts, basic formulas and keyboard navigation controls; experience with Vista (Viewpoint) software a plus. The successful applicant must possess the ability to pass all Company and client-mandated drug and background checking. Occasional travel/driving is required; therefore, the successful applicant will be subject to EPC Services' auto insurance carrier requirements. Applicants must not require sponsorship for employment visa status (e.g., H-1B visa status) now or in the future. Salary commensurate with experience and education. Benefits include: • Medical, dental and vision insurance, • Flexible spending account, • Health savings account, • Life insurance, • Disability insurance, • 401(k), profit sharing and employee stock ownership plan, • Paid vacation, personal days, and holidays, • Paid Parental Leave An Equal Opportunity Employer Job Posted by ApplicantPro

Job DescriptionDescription: About Us: Approved Fire Protection Co. is New Jersey's oldest family-owned, full-service fire protection and safety equipment company. Our services include fire extinguishers, alarm systems, suppression systems, SCBA, gas detection, carbon dioxide, oxygen, sprinkler systems, and so much more. Approved Fire Protection’s mission is to supply life safety products and service to the industrial, commercial, pharmaceutical, and municipal companies in New Jersey and near surrounding areas. Job Summary: Approved Fire Protection is looking for a full- time experienced Service Technician for Fire Sprinkler Systems. This is a great opportunity for someone who can handle working on all types of piping networks including sprinklers and suppression systems. Knowledgeable with various fire suppression systems such as dry, wet, pre-action & deluge systems, fire pumps, jockey pumps, standpipes, hose stations, fire hydrants and backflow preventers. Candidate should be mechanically inclined and possess the ability to diagnose and repair any reported problems. Essential Duties and Responsibilities: • Perform installations, repairs, testing and inspections of wet/dry/pre-action sprinkler systems., • Follow Safety procedures and guidelines., • Ability to lift, carry and move pipes, valves and other equipment that can weight approximately 20 to 100 pounds., • Ability to show up to work and appointments in a timely manner., • Must be able to use ladders and use lifts., • Repair Sprinkler Systems: Groove pipe, thread pipe, replace valves, heads., • Generate correctly and legibly inspection certificates and related paperwork., • General Knowledge of NFPA 25 and NFPA 13., • Develop positive and ongoing relationships with customers to ensure satisfaction., • Provide lists for fabrication and coordinate between the trades., • Must be able to participate in emergency call rotation.Requirements: Preferred Qualifications: • Prior experience in the fire protection industry; primarily sprinkler & suppression, • Ability to inspect, install and service all types of fire sprinkler systems., • Ability to read and understand blueprints., • Strong written and verbal communication skills., • Ability to be proactive in communicating and working with other departments., • Current possession of (or will obtain) a NICET certification., • Ability to pass a pre-employment background and random drug tests., • Enjoys working in a team environment., • Field experience with at least 2-4 years hands on experience in Sprinkler Inspection/Repair, • Current possession of (or will obtain) a DOT HAZMAT endorsed driver’s license., • Current possession of (or will obtain) a NICET level I or II certification., • Valid driver's license and excellent driving record., • Must be willing to travel throughout NJ as required to project field locations., • Language: English Benefits: • Medical, • HSA, • Dental, • Vision, • 401k with company contribution, • Aflac, • Life Insurance, • Long term disability, • Long Term Care Insurance, • Summer Hours Program, • Profit Sharing, • Mileage Reimbursement, • PTO

Job Description Triad Service Center is seeking a qualified Field Technician for service and repair of light industrial equipment in the Elizabeth, NJ area. Equipment that is commonly worked on are floor scrubbers, sweepers, handicapped carts, checkout lanes, paint shakers and other commercial customer equipment found in large retail / industrial locations. Technicians will also install, and service grease containment units used in conjunction with deep fryers. This position would utilize a company vehicle regionally and therefore require a valid, good standing driver’s license. The position would be primarily Monday-Friday, averaging 40 hours a week. Vehicle, laptop, cell phone, PAID TRAINING provided. Starting Pay Range: $20-$27. Our Technicians Typical Duties, Tasks, and Responsibilities: • Have Strong mechanical aptitude with the ability to diagnose, repair and complete both service calls and scheduled PMs on light industrial equipment is essential for our mechanics., • Successfully provide customer service by performing on-location preventative maintenance and repairs on customer equipment by performing job duties., • Visually inspects, tests, and listens to machines and equipment to locate causes of malfunctions. As well as dismantles machine parts to detect wear, misalignment, or other problems., • Installs new or repaired parts; clean and lubricates shafts, bearings, gears, belts, and other parts of machinery., • Staying organized by scheduling repairs and PM’s in similar locations on the same day, as time and location permits. Record keeping and reporting of work orders, parts, supplies ordering, and a daily agenda., • Travel can be up to an average of 300 miles per day, • The associate must regularly lift and/or move up to 10 to 50 pounds and frequently lift and/or move up to 100 pounds., • Frequent exposure to moving mechanical parts, risk of electrical shock, fumes or airborne particles, and toxic or caustic chemicals., • Typically, Monday through Friday. Weekends and after hour work is possible provided customer is willing to pay emergency rates. On call status ends at 11 am EST on weekends and holidays, • Safety and Security – Observes safety and security procedures; reports potentially unsafe conditions; uses equipment and materials properly, • Medical, Dental, and Vision Coverage, • Flexible Spending Account – Medical and Dependent Care, • 401K Plan with Company Match, • Company Paid Life Insurance & Voluntary Life Insurance Options, • Company Paid Short-Term Disability Benefits & Voluntary Long-Term Disability Benefits, • Paid Holidays and Paid Time Off Find out more: Powered by JazzHR ghOF4vx4rs

Job Description Operators will be responsible for the following: • Follow safety regulations and use personal protective equipment, • Follow Supervisor's Instructions, • Operators will use powered mechanical punch presses to pierce, form and blank component parts, as well as other duties as assigned., • Maintain production quality, production rates and a clean work area, • Hours are 7:30 AM to 4 PM M-F

Job DescriptionWe are seeking Shop Foreman to join our team! You will manage and maintain our machine a repair shop. Responsibilities: Manage jobs and employees. • Repair, install, and adjust industrial machinery and pipeline distribution systems, • Troubleshoot and repair defective equipment, • Perform routine preventative maintenance, • Respond to work order requests in a timely fashion, • Adhere to all safety policies and proceduresQualifications: SHOP FOREMAN EXPERIENCE REQUIRED PUMP MECHANIC EXPERINCE PREFERRED • Previous experience in machinery or other related fields, • Strong mechanical aptitude and troubleshooting skills, • Familiarity with industrial tools and equipment, • Ability to handle physical workload

Job Description Hi, we're Nuts.com! Nuts.com is a self-funded, profitable, rapidly growing multi-channel DTC specialty food and wellness company with over 550 people on our team. We're changing the landscape of snacking on nuts, dried fruit, chocolate and more! We planted our roots in Newark, New Jersey during the Great Depression, selling premium nuts on Mulberry Street's open-air market. We've come quite a long way since then, taking our multi-generational family business online in 1999. Even after 96 years, we continue to pride ourselves in expertly sourcing the highest quality foods and treating our customers like family. What's our team like? We're driven, collaborative and entrepreneurial. Energy and passion power our business and we look for candidates who share in that excitement to help us continue to build something special. The role: The Maintenance & Reliability Manager is responsible for ensuring equipment reliability, maximizing asset uptime, and leading the day-to-day maintenance operations at our food manufacturing, warehousing, and distribution site. This role will develop and execute preventive and predictive maintenance programs while supervising and developing a team of maintenance technicians, ensuring a safe, efficient, and compliant operation aligned with our food safety and operational excellence objectives. What you'll do: Maintenance Management • Plan, schedule, and supervise daily maintenance activities, ensuring timely completion of reactive and preventive maintenance work., • Assign, train, and develop a team of 4 maintenance technicians, fostering a culture of safety, food safety, and continuous improvement., • Manage and optimize parts inventory, maintenance spend, and vendor/contractor relationships., • Ensure maintenance activities comply with OSHA, GMP, SQF, and company safety and food safety standards., • Develop, implement, and refine preventive and predictive maintenance programs., • Analyze equipment performance data to identify and resolve chronic issues., • Lead root cause analysis (RCA) and failure mode & effects analysis (FMEA) on equipment failures., • Develop and track maintenance KPIs (MTBF, PM compliance, downtime, etc)., • Partner with production and FSQA teams to support operational and food safety objectives., • Lead small capital projects focused on equipment upgrades, reliability improvements, and automation., • Maintain accurate documentation, including equipment records, work orders, and spare parts inventories., • Ensure compliance with all OSHA, GMP, SQF, and company safety standards., • Lead and participate in safety audits and initiatives related to equipment and maintenance activities., • Support the EHS team in identifying engineering controls to reduce risk. What you'll bring: • Bachelor's degree in Mechanical, Electrical, Industrial Engineering, or related field; or equivalent experience., • 5+ years of experience in reliability, maintenance engineering, or similar roles within food manufacturing, distribution, or a related industry., • Supervisory or team lead experience preferred., • Experience with CMMS systems and maintenance planning., • Familiarity with predictive maintenance technologies (vibration analysis, thermography, oil analysis), • Knowledge of root cause analysis and continuous improvement methodologies (Lean, Six Sigma), • Strong problem-solving, analytical, and communication skills., • Commitment to safety and food safety in a manufacturing environment., • Strong financial acumen and experience managing operational budgets and capital investments., • A high-growth and rewarding role in a foundationally strong and rapidly evolving business, • Annual Salary Range: $115,000-$130,000 plus annual bonus, • Excellent benefits including a 401K Match, • Paid Maternity, Adoption and Paternity leave, • And all the Nuts.com snacks your heart desires + a 40% employee discount EEO STATEMENT Nuts.com is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard of actual or perceived race, color, creed, religion, national origin, ancestry, citizenship status, immigration status, age, sex or gender (including pregnancy), gender identity or expression (including transgender status), sexual orientation, marital status, veteran status, physical or mental disability, genetic information, or any other characteristic protected by applicable federal, state, or local laws. Applicants with disabilities who require assistance or accommodation during the application or interview process should reach out to us at .

Job DescriptionDescription: Position Summary Lincoln Electric Products Co. Inc. is seeking a highly motivated and experienced Operations Manager to join our team in Union, NJ. This individual will play a critical role in overseeing the daily operations of the assembly department, driving efficiency, and ensuring the seamless execution of organizational goals. The Operations Manager will work collaboratively across departments to enhance productivity, implement process improvements, and contribute to the overall success of the business. While this role primarily operates Monday through Friday, occasional Saturday work may be required based on business demands. This full-time, exempt position reports directly to Director of Operations and involves a hands-on approach. Working Conditions: Office/Shop Environment Primary Job Function: · The Low-Voltage Switchboard Assembly Operations Manager oversees the factory's production and assembly of low-voltage switchgear systems. · This includes managing operations and personnel involved in the assembly process to ensure efficient production, high-quality output, and timely delivery. · The role demands strong leadership, operational expertise, and a focus on continuous improvement in a unionized manufacturing environment. Key Job Responsibilities: • Production Planning: The Operations Manager is responsible for developing production plans, scheduling work activities, and ensuring the availability of necessary resources, such as materials, tools, and equipment, to meet production targets., • Quality Control: They are responsible for implementing quality control measures and ensuring that all assembled switchgear systems meet the required standards and specifications. This includes conducting regular inspections, tests, and audits to identify and address any quality issues., • Process Improvement: The Operations Manager continually looks for opportunities to improve the assembly process, optimize workflow, and enhance productivity. They may collaborate with engineering teams to implement process enhancements, introduce automation, or streamline operations., • Team Management: This role involves leading and supervising a team of assembly technicians and operators. The Operations Manager provides guidance, training, and support to ensure that employees perform their tasks effectively and efficiently., • Safety and Compliance: They are responsible for enforcing safety protocols and ensuring compliance with relevant industry regulations and standards. This includes maintaining a safe work environment, conducting safety training, and addressing any safety concerns or incidents., • Inventory Management: The Operations Manager oversees inventory levels, ensures the availability of required components and materials, and helps manage stock control to avoid shortages or excesses., • Collaboration and Communication: They collaborate with other departments, such as engineering, procurement, and quality assurance, to coordinate activities and address any cross-functional issues. Effective communication with stakeholders, such as customers and suppliers, is also essential., • Performance Monitoring and Reporting: The Operations Manager tracks production performance, monitors key performance indicators (KPIs), and prepares regular reports to evaluate productivity, quality, and other relevant metrics. They analyze data and provide recommendations for improvement., • Experience working in a union shop and familiarity with union labor laws should be preferred. Requirements: Job Requirements: · 3-5+ years of working experience in custom metal fabrication electrical equipment in an industrial setting. · Ability to read blueprints, bill of material (BOM’s), schematics, diagrams, and technical orders to determine best methods and sequences of product assembly. · An effective leader who can help level load the factory and has the ability to plan a lookout for 3-4 weeks so that the company’s overhead expenses for overtime in the shop stay within budget. · Should be a Team Player and an Inclusive Leader. · Knowledge about hand tools and measuring devices. · Knowledge of Low Voltage or Medium Voltage Switchgear or components. · Should have a very good understanding of Operational Excellence process improvements. · Ability to work in a loud environment. Education: • A bachelor’s degree in engineering., • Certification in Six Sigma or other process improvement methodologies is preferred.

Job Description General Manager Flexline, Kenilworth NJ Who are we Founded in 1888 in Baltimore, TIPCO Technologies has been at the forefront of innovation and industry leadership for over a century. Today, with locations across the U.S., we’re proud to offer more than just jobs—we cultivate careers. At TIPCO, we champion growth, promotion, and opportunity. If you’re ready to thrive in a forward-thinking, stable, and growth-oriented environment, we want you on our team! Why Join TIPCO? We’re more than a company—we’re a legacy of innovation and a future built on bold ideas. Be part of a culture where your ideas matter, your contributions are valued, and your career can flourish. What you’ll do We are seeking a proven, dynamic General Manager to lead a strategically critical division focused on specialty assembly manufacturing and product distribution within a leading digital service provider, offering fluid conveyance solutions that empower industries to achieve their full potential. This individual will assume full P&L responsibility and drive performance across all functions—including operations, sales & marketing, sourcing, and engineering—while ensuring world-class customer satisfaction, profitability, and growth. This role requires a hands-on leader with a strong sense of ownership, a strategic mindset, and the ability to thrive in a fast-paced, precision-driven environment. A Day in the Life • Bachelor’s degree in engineering, Business, or a related field (or equivalent experience)., • Minimum 10 years of progressive leadership experience in Sales, Engineering, Operations, or Marketing, preferably within industry or aerospace or a related precision manufacturing environment., • At least 5 years of General Management experience, ideally in a mid-market or growth-stage company., • Demonstrated ability to thrive in a fast-paced, high-pressure environment requiring high attention to detail., • Proven strategic thinker with a strong bias for action and results., • Inspirational leadership style with a track record of developing high-performance teams., • Strong communication, financial acumen, and cross-functional collaboration skills., • Physical ability to lift, push, and pull up to 150 lbs. and perform tasks requiring manual dexterity., • Ability to travel within required branch locations. Our Environment • The noise level in the work environment is usually moderate., • While performing the duties of this job, the employee is regularly required to sit. The employee is frequently required to talk or hear. The employee is occasionally required to stand; walk and reach with hands and arms. The employee must occasionally lift and/or move up to 80 pounds. Specific vision abilities required by this job include close vision and ability to adjust focus. Perks and Benefits • Health, Medical, Dental, • 401k, • Company Bonus Structure, • Life insurance, • Pet Insurance, • EAP

Job DescriptionCompany Description Doka USA is proud to be Certified™ by Great Place to Work®! We are committed to fostering a supportive work environment where all of our team members can thrive. As one of the world’s leading companies for developing, manufacturing, and distributing formwork solutions for the construction sector, Doka employs more than 9,000 people in over 58 countries and is part of the family-owned Umdasch Group. We Make It Work. Job Description As a Senior Formwork Designer at Doka USA, you will play a pivotal role in the design and development of formwork systems for construction projects. Leveraging your expertise in formwork design principles, structural engineering, and CAD software, you will collaborate with cross-functional teams to deliver efficient and cost-effective formwork solutions that meet project requirements and exceed client expectations. This role will be an in-person role based out of our Kenilworth, NJ, branch and will report to the Engineering Manager. Responsibilities: • Lead the design and development of formwork systems for a wide range of construction projects, including commercial, residential, and industrial structures., • Conduct comprehensive structural analysis to ensure the integrity and safety of designs, considering factors such as load capacity, stability, and material specifications., • Collaborate with project managers, engineers, and clients to understand project requirements, objectives, and constraints., • Utilize CAD software (e.g., AutoCAD, Revit) to create detailed formwork drawings, plans, and schematics, ensuring accuracy and compliance with industry standards and regulations., • Provide technical guidance and support to junior designers and drafters, fostering a collaborative and knowledge-sharing environment within the team., • Stay abreast of industry trends, advancements in formwork technology, and regulatory changes, incorporating best practices into design processes and methodologies., • Participate in project meetings, reviews, and presentations, communicating design concepts, progress updates, and recommendations to stakeholders., • Contribute to continuous improvement initiatives aimed at optimizing design processes, enhancing product quality, and maximizing efficiency.Qualifications, • Bachelor's degree in Civil Engineering, Structural Engineering, or a related field., • Proven experience in formwork design and engineering within the construction industry., • Proficiency in CAD software, such as AutoCAD, Revit, or similar tools., • Strong knowledge of formwork design principles, structural analysis, and building codes., • Excellent problem-solving skills and attention to detail, with a focus on delivering high-quality and innovative solutions., • Effective communication and collaboration skills, with the ability to work cross-functionally and engage with clients and stakeholders., • Prior experience in project management or leadership roles is preferred., • Professional Engineer (PE) certification is a plus. Additional Information In accordance with applicable state and local pay transparency laws, Doka USA Ltd. is committed to providing a clear and equitable compensation structure. The salary range for this position is $80,000 - $90,000 annually, which is based on a variety of factors, including but not limited to, the candidate’s experience, qualifications, skills, and geographic location. This range represents the base pay for the position and does not include potential bonuses, commissions, benefits, or other forms of compensation. Final compensation will be determined at the time of offer and in accordance with internal equity and market data Doka offers terrific career opportunities, competitive compensation, comprehensive benefits including medical, dental, vision, Flexible Spending Account, company paid life insurance, supplemental voluntary term life insurance, 401k retirement plan (Roth and Non-Roth), short-term disability, AFLAC policies, paid time off (sick/personal, vacation, floating holiday and company paid holidays) and an exciting opportunity to join as a member of Doka's team. If working with some of the most impressive construction projects in the US and joining an industry leader excites you, please submit your resume by clicking below. Visit us on-line at for additional information on Doka USA, Ltd. Doka USA, Ltd. is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. If you are interested and have a strong competitive drive, positive attitude, a desire to learn and grow from your experiences, then this is your opportunity to make an immediate difference. Please submit your resume and apply now. External candidates must be authorized to work for any employer in the USA.