Industrial jobs in Saratoga Springs, New YorkCreate job alerts

Clean Harbors in Newburgh, NY is seeking a Class B CDL Driver to operate light and heavy-duty trucks/work equipment at our customer sites; some of the vehicles operated include Vacuum Trailer, roll-off trailers, van trailers, box trucks and high-powered vacuum loaders. This role is responsible for performing driving and non-driving duties on and off customer sites associated with hazardous waste clean-up. TRAVEL / ON CALL / EMERGENCY RESPONSE Hourly Range - $28.00 - $30.00 Please note: All new hires must attend a two-week training academy; travel expenses are paid by the company and per diem is provided. Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Why work for Clean Harbors? • Health and Safety is our #1 priority and we live it 3-6-5!, • Focus on maintaining sustainability and cleaning the Earth, • Recruiting Pay range, • Comprehensive health benefits coverage after 30 days of full-time employment including 401K with Company match, • Own part of the company with our Employee Stock Purchase Plan, • Opportunities for growth and development for all the stages of your career, • Ensure Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and always acting in a safe manner, • Operate commercial trucks and assist field laborers when needed (team atmosphere where everyone helps), • Operate a variety of Class B trucks, • Loading and unloading of trucks, • Ensure customer satisfaction at time of service., • Proper placarding of vehicles to meet Company and DOT requirements/regulations, • Maintain daily logs, time sheets, and various reports, • Follow all local, state (provincial) and federal compliance regulations and rules, • Safely operate vehicles in accordance with U.S. DOT, local, state (provincial) and federal requirements, • Safely observe all corporate operating guidelines and procedures, • Observe all company environmental health and safety operating guidelines, • Performs other duties as assigned, • By position, ability to be on call for emergency response on rotating basis every other week, • Valid Class B CDL, • Ability to operate a manual transmission, • Hazmat and Tanker endorsement required, • Ability to use various mobile devices, • Perform physical functions per job requirements, • Successfully complete a background check, drug test, and physical, by position, • Per OSHA's Respiratory Protection Standard, 29 CFR 1910.34, employees in positions requiring respirators are required to meet facial hair standards. Preferred Qualifications:, • Commercial driver experience, • Hazmat and Tanker endorsement, • Previous Hazmat experience Clean Harbors is a Military & Veteran friendly company. Clean Harbors is committed to complying with applicable pay transparency laws and ensuring fair and equitable compensation. The posted salary range reflects the minimum and maximum target for this role. Final compensation may vary based on factors such as location, experience, skills, and business needs. In addition to the base salary, some roles may be eligible for bonus or incentive compensation and a comprehensive benefits package. *CH

Job Description Join our team! Pay is starting at $25/hr based on experience We're seeking CDL Class A Truck Driver and Operators to support industrial and environmental cleaning operations at various customer sites. This is a hands-on role requiring physical stamina, travel flexibility, and a strong commitment to safety. What You’ll Do: • Truck Driver and Operators will operate tools like water blast guns, vacuum hoses, and more, • Set up and break down equipment at job sites, • Perform manual labor including shoveling and cleaning, • Physically fit and able to work in confined spaces, • CDL Class A Truck Driver and Operators, • Willing to travel and work extended hours if needed, • Full training provided, • Opportunities for travel, • Growth and advancement potential

Job Description JOB FUNCTION: This position is responsible for the operation of tools and equipment in a variety of customer work sites for providing industrial and/or environmental cleaning. ESSENTIAL FUNCTIONS: 1. Strictly adhere to MPW Health and Safety Policies and Procedures., 2. Arrive at branch or jobsite on time, in uniform, properly groomed, mentally alert and physically able to work. Follow branch process for work schedule., 3. Set up jobsite including water blast hose, or vacuum hose, barricade tape and tags., 4. Use equipment such as, water blast gun, water lance, dry vacuum hose (6”and 8”), wet vacuum hose (6” and 8”), shovels, picks, automated tooling, aerial platform lifts and any other equipment needed., 5. Cleans equipment prior to return to MPW branch location., 6. Demonstrate initiative in execution of assigned tasks., 7. Performs other duties as assigned by immediate supervisor. QUALIFICATIONS: 1. Maintain valid ID to ensure access into customer sites., 2. Preferred specific exposure to an equipment or maintenance environment., 3. Experience performing manual labor in an outside setting., 4. Preferred 2-3 years of “hands on” experience with tools or heavy equipment. PHYSICAL REQUIREMENTS: 1. Ability to move up to 50 Lbs., with or without accommodation., 2. Ability to maintain a consistent workload that involves physical manual labor., 3. Ability to maintain alertness and fitness for duty., 4. Ability to position oneself for work conducted in and around confined spaces., 5. Ability to wear respirators in environments that may expose you to chemicals, fumes, etc., 6. Ability to maintain workloads that may include travel to a variety of states for days or weeks, and daily timeframes that could exceed the typical 8-hour shift.

Job Description Arnoff Moving & Storage, a prominent logistics company since 1924 in the Northeast is seeking Warehouse Assistants Join our team! Warehouse Assistant will be responsible to receive/release, inventory, and track and locate items in our warehouses. Requires exceptional physical ability and coordination. Need to be able to lift and move objects to 50 lbs. Strong organizational skills needed. Warehouse assistants may use hand held scanners. . Must be able to work both independently and on a team. Safety is first priority. Must have experience working a fast paced warehouse. Great pay! Responsibilities and Duties Include: · Follows all safety procedures and utilizes good safety practices. · Process, package, and ship e-commerce orders accurately. · Organize stock and maintain inventory by following all SOPs in place. · Load and unload inbound receipts and outbound orders utilizing established methods. · Organize warehouse space as directed by management. · Putaway incoming inventory items using established methods. · Abide by all company safety and hygiene regulations · Must be capable of being trained on and operate powered industrial equipment such as Forklift trucks and electric pallet jacks. · Utilize Mobile scanning equipment and Warehouse Management Systems · Other duties as directed by management. Arnoff Moving and Storage is a 101 year old- family owned company! Come work for Arnoff, where you are not just another number or employee! Superior Benefits Package available including: o Health Insurance -- under $7.00per week! o Dental Insurance o Vision Plan o Life Insurance -- at no cost to you o 401K with Profit Sharing Arnoff is an affirmative action/equal opportunity employer.

Job DescriptionJob description Electrical Engineer About Espey: Come join us at Espey, where we’re shaping the future. As industry leaders in manufacturing high-quality power conversion solutions, we specialize in serving mission-critical military and rugged industrial sectors for use in the most harsh & severe environments. With over 90 years of experience, Espey is synonymous with innovation and reliability, providing essential power supplies and transformers that ensure the safety of our military personnel. As a publicly traded company on the NYSE (ESP), we're committed to excellence across all facets of our operation, from design and development to testing and manufacturing. Located in the vibrant city of Saratoga Springs, NY, just 30 minutes from the state capital and within easy reach of major metropolitan centers like New York City, Boston, and Montreal, Espey offers a unique opportunity to be part of something extraordinary. If you're ready to shape the future and embark on a fulfilling career adventure, join us at Espey. Let's build together! About the job: Join our innovative engineering team as a Electrical Engineer, where you will design rugged, high-reliability power conversion solutions for military and industrial applications. You’ll play a key role in the design, analysis, and support of advanced AC-DC, DC-DC, and DC-AC systems, with output power levels exceeding 1KW. Our engineers take projects from concept to production, working in close collaboration with cross-functional teams and end customers. Electrical Engineer Key Responsibilities including, but not limited to: • Design and develop high-performance switch-mode power supplies (SMPS) for military and industrial use, • Utilize a range of converter topologies and control methods to optimize efficiency, power density, and reliability, • Conduct detailed circuit simulation, schematic capture, and design reviews using tools such as Altium and PSpice, • Ensure designs meet applicable EMI/EMC, thermal, and environmental requirements (MIL-STD-704, 461, 810), • Package designs for rugged environments including attention to shock, vibration, and thermal management, • Prepare documentation packages including schematics, bills of materials, test plans, and technical reports, • Troubleshoot issues during prototyping, validation, and production phases, • Interface with customers to interpret specifications and define custom solutions, • Lead or contribute to internal project teams and support qualification testing and certification efforts, • Bachelor’s Degree in Electrical Engineering (BSEE) or related field, • Minimum 5 years’ experience in the design and development of power electronics for high-reliability or MIL-spec applications · 8+ years’ experience in the design and development of power electronics • MSEE or advanced technical degree, • Familiarity with MIL-STD design practices (MIL-STD-704, 461, 810), • Experience with environmental and qualification testing, • Experience with magnetic design or transformer-based power systems, • Hands-on experience with thermal and mechanical integration of power systems, • Familiarity with DoD or defense contractor programs and lifecycle documentation, • Demonstrated experience with power levels exceeding 1KW and a strong understanding of SMPS topologies (e.g., full-bridge, push-pull, buck, boost), • Knowledge of EMI/EMC compliance standards, thermal design principles, and ruggedized packaging, • Proficient in power electronics simulation and design tools (PSpice, Altium, etc.), • Strong analytical and troubleshooting skills, • Pay Range: $65-120k, • Four-day work week, • 401(k) and Employee Stock Ownership Plan (ESOP), • Medical, Dental, Vision, & Life Insurance with Employee Assistance Program, • Flexible Spending Account & Health Savings Account, • Tuition Reimbursement Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. Job Type: Full-time Pay: $65 – 120k Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee assistance program, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Retirement plan, • Tuition reimbursement, • Power electronics or industrial electronics: 5 years (Required) Pay: $65,000.00 - $120,000.00 per year Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee assistance program, • Health insurance, • Life insurance, • Paid time off, • Vision insurance Schedule: • 10 hour shift Ability to Commute: • Saratoga Springs, NY 12866 (Preferred) Ability to Relocate: • Saratoga Springs, NY 12866: Relocate before starting work (Preferred) Willingness to travel: • 25% (Preferred) Work Location: In person

Navarro Research and Engineering is recruiting an Industrial Hygienist in West Milton, NY.This position requires an active DOE L Clearance or DOD Equivalent to be considered.Navarro Research & Engineering is an award-winning federal contractor dedicated to partnering with clients to advance clean

This position will be posted for a minimum of 3 days and will remain open until filled or adjusted based on the volume of applicants.Further your career at Ball, a world leader in manufacturing sustainable aluminum packaging.Achieve extraordinary things when you join our team, and make a difference

Job Description Dynamic Call Center Director Opportunity! We seek a strategic and energetic leader to join our client's team. The successful individual will oversee a high-performing contact center that serves as the operational backbone for a network of locations across the country. The Director will ensure exceptional support for existing customers while driving new business by maximizing both inbound inquiries and targeted outbound calling efforts. Essential Responsibilities: • Partner with key stakeholders to develop and implement our contact center strategy and objectives, • Lead day-to-day contact center operations to achieve customer care and sales goal, • Leverage analytics and facts to make staffing decisions and drive new initiatives, • Create and implement new solutions to engage with customers in a way that provides a positive customer experience and drives top-line sales growth, • Lead a team of geographically distributed professionals, • Oversee and train supervisors to ensure that all front-line personnel have the required training and resources to meet customer needs and expectations, • Monitor systems reports and dashboards for case management impact; proactively make adjustments as necessary, • Drive additional initiatives that leverage our contact center as an engine for growth, • Bachelor’s degree in business, finance, or a related field, • 10+ years of job related experience managing call center/contact center operations, with ideally 4 years of multi-site responsibility, • Strong analytical skills and a love of metrics, • Familiarity with best-in-class call center management principles, metrics, and practices., • Dynamic, results-driven leadership, • Experience partnering with business stakeholders across geographies and functions to improve support, • Advanced problem-solving skills to address complex and multi-faceted business problems; strong quantitative orientation., • Familiarity with cloud-based Contact Center systems and solutions, • Excellent organizational skills and ability to manage multiple projects in a fast-paced environment, • Outstanding verbal and written communication skills, • Competitive rate of pay and a generous benefits program, • Salary commensurate with experience, • Medical, Dental, life, vision, short-term disability, and long-term disability insurance program Our team is committed to supporting job seekers with fast onboarding, weekly pay, and long-term growth opportunities. We take care of the paperwork so you can focus on what matters most: your success on the job. Whether you're looking for a flexible schedule or your next big career move, Snelling is here to help.Snelling Staffing Services is a locally managed branch of a nationally recognized staffing firm that’s been connecting talented workers with leading employers since 1951. We specialize in light industrial, clerical, hospitality, and healthcare staffing—offering both temporary and temp-to-hire roles.\r\n\r\nOur team is committed to supporting job seekers with fast onboarding, weekly pay, and long-term growth opportunities. We take care of the paperwork so you can focus on what matters most: your success on the job. Whether you're looking for a flexible schedule or your next big career move, Snelling is here to help.

Job DescriptionSalary: $165,000-$185,000 TheDirector of Manufacturing is accountable for building and leading a high-performing operations team that consistently delivers on safety, quality, delivery, and cost. Joining the organization's Leadership Team and reporting to the CEO, this role drives critical daily execution, sets the long-term manufacturing direction and translates growth goals into scalable capacity. The Director leads TPS-driven continuous improvement to increase throughput, reduce waste, strengthen material flow, and elevate first-pass yield, while partnering closely with Engineering, Sales, and Finance on demand/capacity planning, DFM/NPI readiness, and budgeting/resource decisions. Recently recognized as the fastest growing manufacturer in New York State and the most innovative company in New Yorks Capital Region, G&G Industrial Lighting is a manufacturer of industrial LED lighting products based in Malta, NY. Through relentless innovation and by doing business in alignment with our core values, G&G has grown to become the leading supplier of harsh environment lighting and lighting controls. G&G locally manufactures purpose-built products for the car wash, food processing, mass transit, and industrial markets. Who will I report to? CEO Who will report to me? Production Supervisor, Project Manager, Warehouse Supervisor, Sr. Manufacturing Engineer, Procurement Manager, Continuous Improvement Specialist Salary: $165,000-$185,000 What roles am I accountable for? LMA (Leadership, Management and Accountability) (25%) • Contribute as a key member of the senior leadership team, • Provide leadership and strategic direction to direct reports, fostering a high performing culture aligned with G&Gs core values, • Set clear performance expectations and KPIs, conducting regular reviews and providing coaching to ensure individual and team success, • Lead Operations L10s, 1:1s and quarterly planning to drive clarity and alignment, • Build a strong safety culture rooted in proactive behaviors and continuous improvement, • Partner with Finance and HR on operational budgeting, staffing and resource planning, • Develop and communicate the long term manufacturing vision that supports company growth and product strategy, • Lead TPS driven continuous improvements through hands on participation to reduce waste and increase throughput, • Guide major operations initiatives including single piece flow, MRP and SMT implementation, • Ensure the production schedule supports Sales demand and uses manpower efficiently, • Oversee and strengthen demand and capacity planning activities, • Provide strategic oversight of the process quality function and the quality management system, • Partner with Engineering to ensure new products are designed for manufacturability and transition smoothly into production, • Oversee the adoption of tools, technologies and automation that enhance operational performance, • Ensure warehouse and inventory processes operate efficiently, safely and accurately through strong systems and accountability, • Provide leadership of the organizations supply chain strategy and execution including planning, purchasing and vendor management, • Strengthen critical supplier partner relationships and optimize supplier performance using data, scorecards and business reviews, • Identify and drive cost-out opportunities across the supply chain (strategic sourcing, supplier negotiations, value analysis/value engineering, and freight/logistics optimization) to reduce total landed cost while maintaining quality and delivery performance., • Improve upon planning and purchasing processes to ensure material availability, inventory optimization and accuracy, • Improve forecasting, safety stock strategy and replenishment methods in partnership with Sales and Finance Key Measurables • On time production completion and delivery, • First pass yield and overall defect rate, • Safety performance including incident rate and near miss reporting, • Labor productivity and throughput per team member, • Inventory accuracy and inventory turns, • Vendor performance including lead time, cost stability and vendor quality, • Budget performance including labor cost, overtime and cost of quality, • Progress on TPS and continuous improvement initiatives, • Engagement and retention across the operations team How do we show up every day? Positive Attitude • Intentional and dedicated to excellence in all that we do. What will I need to succeed? • Must align with our Core Values, • 5+ years experience as a Director of Manufacturing or similar, • Experience leading operations teams through high growth, • Experience as a lead decision maker in identifying and implementing manufacturing processes, • Toyota Production Systems or lean manufacturing experience, • Strong analytical, innovative and critical thinking skills, • Desire to be part of a hardworking, collaborative, fun and values driven team, • Proven track record of clear communication with senior leadership and cross functional partners, • Data driven methodology for decision making using KPIs and metrics, • Ability to effectively lead and motivate teams across a variety of functional roles

Job Description Navarro Research and Engineering is recruiting an Industrial Hygienist in West Milton, NY. This position requires an active DOE L Clearance or DOD Equivalent to be considered. Navarro Research & Engineering is an award-winning federal contractor dedicated to partnering with clients to advance clean energy and deliver effective solutions for complex challenges in the nuclear and environmental fields. Joining Navarro means being a part of an exceptional team committed to quality and safety while also looking for innovative strategies to create value for the client’s success. Headquartered in Oak Ridge, Tennessee, Navarro has active programs in place across the nation for DOE/NNSA, NASA, and the Department of Defense. The Naval Nuclear Laboratory develops advanced naval nuclear propulsion technology for the safety and reliability of our Navy's submarine and aircraft fleet. Our company is looking for an Industrial Hygienist to join our team. The industrial hygienist will conduct and document industrial hygiene exposure assessments as part of a comprehensive industrial hygiene assessment of site processes. Assessments include the performance of field surveillances, conducting workforce interviews, reviewing established procedures, reviewing industrial hygiene data, performing industrial hygiene sampling and interpret the results of that sampling. Efforts will include sampling for potential hazards such as asbestos, silica, volatile organic compounds, welding fumes, noise dosimetry, and area noise measurements. In addition, the industrial hygienist will assist with general industrial hygiene work for the site. The individual must use professional judgment while assisting with industrial hygiene exposure judgments. Requirements This position requires an active DOE L Clearance or DOD Equivalent to be considered. Bachelor of Science or bachelor's degree in a related field from an accredited college or university. Demonstrated experience within industrial hygiene including sampling and calibration of industrial hygiene equipment. Demonstrated strong interpersonal, teaming skills, and the ability to coordinate multi-discipline teams. Strong written and verbal communication skills. Upon reporting must have full mobility, be able to walk on uneven surfaces, climb up and down ladders, work in an industrial environment, and have unrestricted access to a nuclear facility. Desired Knowledge, Skills, and Abilities ABIH Certification (CIH), but not necessary. Experience with nuclear or heavy construction or chemical processes or other industrial process facilities. Good working knowledge and experience with Microsoft Office. Familiarity with the industrial hygiene exposure assessment process. Knowledge of industrial hygiene sampling techniques. Knowledge of industrial safety and health requirements. Due to the nature of the government contract requirements and/or clearances requirements, US citizenship is required. Navarro is an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, race, religion, color, national origin, age, disability, veteran’s status or any classification protected by applicable state or local law. Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation & Public Holidays), • Short Term & Long Term Disability Compensation Salary Range $90,000- $140,000

Job DescriptionSalary: $60,000-$80,000/year The Test Technician is an integral member of the G&G engineering team. Reporting to the VP of Engineering, this team member executes hands on engineering lab activities and is the first line of technical support for our customers. As part of a small, tight knit team, you will see the full product life cycle from new product testing to long term field reliability. This role calls for a strong excellent technical troubleshooting skills, a passion for hands on problem solving, and customer service orientation. Recently recognized as the fastest growing manufacturer in New York State and the most innovative company in New Yorks Capital Region, G&G Industrial Lighting is a manufacturer of industrial LED lighting products based in Malta, NY. Through relentless innovation and by doing business in alignment with our core values, G&G has grown to become the leading supplier of harsh environment lighting and lighting controls. G&G locally manufactures purpose-built products for the car wash, food processing, mass transit, and industrial markets. Who will I report to? VP of Engineering Salary: $60,000-$80,000/year Location: In-person - Ballston Spa, NY What am I accountable for? 1. Product Testing (40%) • Collaborate with engineering to develop and execute test plans for new and existing products., • Document test results by recording data and generating clear reports., • Communicate insights and feedback from testing to improve the design process. 2. Failure Analysis & Reliability (25%) • Lead the internal field return analysis process, including teardown, root cause determination, and documentation of findings., • Maintain accurate records of product returns and communicate trends and critical issues to engineering., • Support occasional customer site visits to audit field reliability and assist with complex troubleshooting. 3. Technical Customer and Product Support (25%) • Serve as one of the first points of contact for inbound technical support as a part time basis by phone and email, performing basic troubleshooting and escalating complex issues to the Lead Product Engineer., • Manage the warranty and returns (RMA) process by entering claims, coordinating hardware returns, and providing timely status updates., • Configure control systems to meet the needs of customers., • Coordinate with the Product Support Specialist to ensure coverage during peak periods. 4. Lab and Equipment Management (10%) • Maintain engineering lab facilities and ensure all test equipment is in good working order with appropriate calibrations., • Assist in planning test schedules based on project priorities and equipment availability., • Continuously improve engineering lab spaces to be efficient, organized, and safe. Key Measurables • Product teardown backlog., • On time completion of validation plans and clear reporting of results., • Percentage of assigned tasks or projects completed on schedule., • Support ticket first response time How do we show up every day? Positive Attitude • We approach our work with intention. We take pride in doing things right the first time. We lead with quality in everything we do. What will I need to succeed? • Must align with our Core Values, • 3+ years of experience in product testing, validation, or technical support ORan associate's degree in engineering, engineering technology, or a related technical field., • Basic knowledge of electrical and mechanical concepts., • Customer focused mindset with excellent written and verbal communication skills., • Proven hands on experience with strong knowledge of electrical and mechanical concepts., • Ability to thrive in a fast paced, hands on environment., • Proficiency with Microsoft Excel., • A Gets it Done attitude resourceful, adaptable, and able to drive projects to completion without constant oversight.

Job DescriptionSalary: $60,000-$80,000/year Are you an electrician or electrical technician looking for a new direction? If you love hands on problem solving but are ready to step out of the field and into a clean, well equipped engineering lab, this role might be the perfect next chapter. G&G is looking for someone with real world electrical experience whos excited to apply their skills to product testing, troubleshooting, and technical support as part of our engineering team. The Electrical Test Technician is an integral member of the G&G engineering team. Reporting to the VP of Engineering, this team member executes hands on electrical, mechanical, thermal, and chemical testing. As part of a small, tight knit team, you will see the full product life cycle from new product testing to long term field reliability. This role calls for a strong excellent technical troubleshooting skills, a passion for hands on problem solving, and customer service orientation. Recently recognized as the fastest growing manufacturer in New York State and the most innovative company in New Yorks Capital Region, G&G Industrial Lighting is a manufacturer of industrial LED lighting products based in Malta, NY. Through relentless innovation and by doing business in alignment with our core values, G&G has grown to become the leading supplier of harsh environment lighting and lighting controls. G&G locally manufactures purpose-built products for the car wash, food processing, mass transit, and industrial markets. Who will I report to? VP of Engineering Salary: $60,000-$80,000/year Location: In-person - Ballston Spa, NY What am I accountable for? 1. Product Testing (40%) • Collaborate with engineering to develop and execute test plans for new and existing products (electrical, mechanical, thermal, and chemical testing)., • Document test results by recording data and generating clear reports., • Communicate insights and feedback from testing to improve the design process. 2. Failure Analysis & Reliability (25%) • Lead the internal field return analysis process, including teardown, root cause determination, and documentation of findings., • Maintain accurate records of product returns and communicate trends and critical issues to engineering., • Support occasional customer site visits to audit field reliability and assist with complex troubleshooting. 3. Technical Customer and Product Support (25%) • Serve as one of the first points of contact for inbound technical support as a part time basis by phone and email, performing basic troubleshooting and escalating complex issues to the Lead Product Engineer., • Manage the warranty and returns (RMA) process by entering claims, coordinating hardware returns, and providing timely status updates., • Configure control systems to meet the needs of customers., • Coordinate with the Product Support Specialist to ensure coverage during peak periods. 4. Lab and Equipment Management (10%) • Maintain engineering lab facilities and ensure all test equipment is in good working order with appropriate calibrations., • Assist in planning test schedules based on project priorities and equipment availability., • Continuously improve engineering lab spaces to be efficient, organized, and safe. Key Measurables • Product teardown backlog., • On time completion of validation plans and clear reporting of results., • Percentage of assigned tasks or projects completed on schedule., • Support ticket first response time How do we show up every day? Positive Attitude • We approach our work with intention. We take pride in doing things right the first time. We lead with quality in everything we do. What will I need to succeed? • Must align with our Core Values, • Hands on electrical or technical experience such as electrical trades, product testing, validation, or technical support OR an associate's degree in engineering, engineering technology, or a related technical field., • Basic knowledge of electrical and mechanical concepts., • Customer focused mindset with excellent written and verbal communication skills., • Proven hands on experience with strong knowledge of electrical and mechanical concepts., • Ability to thrive in a fast paced, hands on environment., • Proficiency with Microsoft Excel., • A Gets it Done attitude resourceful, adaptable, and able to drive projects to completion without constant oversight.

Job Description Do you often provide ideas that are outside the box? Do you find yourself re-imagining what is possible and push the envelope to set a new standard? If so, we want you to join our team! As a Sr. Solar & Battery Storage Project Developer at Centrica Business Solutions, you will assist in the development of solar and solar and storage projects across North America. The Solar & Battery Storage Project Developer will work closely with business development, management, engineering, project management, and construction staff to identify, assess and structure technical and financial solutions for customers' renewable and energy efficiency needs. The Solar Developer will lead the project through Pre-Construction due diligence to contract. The Solar & Battery Storage Project Developer possesses a strong technical aptitude and the communication and business acumen to translate customer needs into technical guidelines. Open to flexible work schedules working fully remote or hybrid but must be able to travel occasionally. Preferably looking for someone to be near the following locations: • Mid Atlantic region, • Northeast We promote a FlexFirst approach which empowers our employees to take ownership of their work and maintain a positive work/life balance. Our Solar & Battery Storage Project Developers contribute to the team by: • Act as technical lead for the team of Developers in the region, • Creating and managing cashflow models to capture all revenue streams specific to solar and storage projects., • Assisting in management of incentive program enrollment for all projects, track timelines to ensure completion within target deadlines, and submit final documentation to secure program funding., • Coordinating with the project development team and with the financing partner, communicating project updates and milestones achieved, providing transparency, and assisting in document sharing., • Overseeing and/or performing the Helioscope design and budgeting of projects., • Auditing sites as needed for PV solar installation suitability, environmental limitations, structural limitations, etc., • Developing professional quality proposal content for technically complex, multi-site PV solar and battery storage systems (BESS) installations., • Managing 3rd party vendor relationships and Scope of Work/proposals. (i.e. Electrical and Structural partners) ., • Developing proposals, reports and presentations in collaboration with the Solar Analyst., • Networking within the industry. The core components of success are (i.e. must haves): • Bachelor’s degree in mechanical or electrical engineering, Business, or a related field. OR Bachelor’s in Distributed Energy/Generation., • 6+ years of work experience in the solar industry and or Engineering and Operations., • Experience in commercial and industrial Solar projects is required with demonstration of full life cycle project experience from concept to performance. A clear set of completed solar projects that have been screened, audited, designed, installed, interconnected and commissioned with Permission to Operate., • Experience in renewable financial modeling: demonstrated ability to maintain Excel based energy modeling., • Understanding of construction of solar PV and BESS projects., • Helioscope modeling skills (preferred), • Good technical skills relating to Behind the Meter interconnection, inverters, racking, and overall system design for solar PV projects ranging from 100kW to 5MW DC., • Past experience and an up-to-date knowledge of best practices as they relate to solar and storage projects (preferred), • Valid Driver’s License; Travel required with employee’s automobile. Our Team and Culture: We offer a culture filled with collaboration, passion, reliability, trustworthiness and more! We don’t just talk the talk but we actually walk to walk here and can show this through our employee feedback – check it our yourself to see what employees are saying: • High level of employee engagement, • Trust in leadership, • Senior leaders listen and act, • Wellbeing, • Employees feeling valued, • Strong focus in health and safety, • Strategy & direction What we do: Digitalization and climate change mean organizations need to be more energy efficient and resilient to limit their impact on the environment while maintaining control of their energy spend. At Centrica Business Solutions, we deliver integrated energy solutions that balance profitability and sustainability. By bringing together the right combination of technologies and approaches, we help organizations get the most value from their energy and energy infrastructure, helping them solve their energy challenges and harness new opportunities in a changing world. As an Energy Service Company (ESCO), our broad portfolio includes: • Energy Efficiency Solutions, • Solar and Energy Storage, • Electric vehicle and battery storage solutions Our benefits and perks: At Centrica Business Solutions, we ensure you are supported and valued. To help do this, we offer a competitive compensation and benefits package. Some of our benefits & perks include: • Medical/Dental/Vision Insurance, • HSA, with company match, • FSA/DCA, • Paid Time Off, • 401(k), with company match, • Life Insurance, • Accident Insurance, • Employee Wellness Program, • Fitness Reward Program, • Employee Training and Development Opportunities, • Casual attire with professional and fun work environments, • Flexible/hybrid work opportunities, • Fungineering (We Engineer the Fun!) The US base salary range for this full-time position is $130,000-$160,000 + bonus + benefits. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, and relevant education or training. Your recruiter can share more about the specific salary range for your preferred location and expectations during the hiring process. Please note that the compensation details listed in US role postings reflect the base salary only, and do not include bonus, commission, or benefits. Centrica Business Solutions is an Equal Opportunity Employer and as such, does not discriminate in its hiring or employment practices.

Job DescriptionJob Title: Electrical Assembler Job Description We are seeking a skilled Electrical Assembler who will be responsible for assembling electrical components by reading and interpreting schematics and blueprints. This position requires precision and the ability to work with small tools and fine motor skills. Responsibilities • Read and comprehend schematics and blueprints to assemble electrical components., • Use fine tools, including hand tools, power tools, micrometers, and calipers, to assemble products., • Work at the beginning of the assembly process, ensuring quality over quantity., • Complete basic training and receive peer assessments on all work., • Operate mechanical torque wrenches and conduct inspections to ensure quality standards are met., • Train on the FCSD line with the goal of advancing to the level 1 SCI Line after mastering work orders.Essential Skills, • Ability to read schematics and blueprints., • Proficient in using hand tools and power tools., • Ability to use mechanical torque wrenches., • Strong fine motor skills for working with small tools., • Mechanical aptitude and the ability to work with electronics.Additional Skills & Qualifications, • High school diploma or equivalent., • Experience in electrical assembly, inspection, and crimping., • Ability to work with microscopes and conduct general production tasks., • Physical ability to bend and move hands, arms, and elbows throughout the day.Why Work Here? Join one of the largest train electronic manufacturers in the world, where your skills contribute to projects across every rail system in the USA. Benefit from a very clean and organized work environment, with job security from current railroad contracts and warranties ensuring employment until 2050. This is an opportunity for a long-term career where you can grow and potentially retire. Work Environment Work in a very clean and organized industrial environment, specializing in the design and manufacture of auxiliary power converters and on-board systems for railways. The position operates on a Monday to Friday schedule, from 7:00 am to 3:30 pm. The dress code includes steel-toed boots and work pants, with layered clothing recommended for colder months. Be prepared to occasionally go outside if safety protocols require it. Job Type & Location This is a Contract to Hire position based out of BALLSTON SPA, NY. Pay and Benefits The pay range for this position is $21.00 - $21.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in BALLSTON SPA,NY. Application Deadline This position is anticipated to close on Dec 15, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Martin Brower is now hiring Local CDL-A Drivers in Gansevoort, NY! \nStart at $31.67 per Hour - $10,000 Sign-On Bonus* \nLocal Routes, Home Daily - Excellent Benefits \n\n Martin Brower is a global supply chain leader that provides smart, sustainable solutions for customers across 18 countries. We are dedicated to creating an outstanding work environment for our team of 12,500+ employees, who combine our expertise with the latest technologies to deliver unmatched value for our customers. \n\n Our brand promise is simple, but bold: \nWe make it easier to run great restaurants. \n\n Top Pay & Benefits: \n\n\n\t • Local deliveries – home daily\n\t, • Start at $31.67 per hour, increase to $35.46 after 6 months\n\t, • Weekly pay\n\t, • Average $88,000 to $120,000 annually\n\t, • $10,000 sign-on bonus for drivers with 1 year of verifiable CDL-A experience*\n\t, • Benefits from day 1\n\t, • Medical, Dental and Vision insurance\n\t, • 401(k) with company match\n\t, • The primary duty of the CDL Class A Driver entails the safe and professional operation of a commercial motor vehicle, company equipment, and the courteous delivery of products to our valued customers.\n\t, • The CDL Class A Driver is responsible for unloading and delivering products to our local customers and are responsible for pre-trip and post-trip inspections of equipment and vehicle\n\t, • The CDL Class A Driver will securely operate Powered Industrial Trucks (PIT) and/or Material Handling Equipment (MHE) such as an electric pallet jack and/or hand truck\n\t, • Must be at least 21 years old \n\t, • Valid CDL-A\n\t, • Have at least 1 year of Class A commercial driving experience or equivalent driving experience in the military \n\t, • Must be able to push, pull, lift and climb\n\t, • Must be able to lift products from 25 pounds to 50 pounds on a regular basis and up to 170 pounds\n\t, • High School Diploma or General Education Degree \n\t

Job Description Large Magnetics Assembly Technician: Come join us at Espey, where we're shaping the future. As industry leaders in manufacturing high-quality power conversion solutions, we specialize in serving mission-critical military and rugged industrial sectors for use in the most harsh & severe environments. With over 90 years of experience, Espey is synonymous with innovation and reliability, providing essential power supplies and transformers that ensure the safety of our military personnel. As a publicly traded company on the NYSE (ESP), we're committed to excellence across all facets of our operation, from design and development to testing and manufacturing. Located in the vibrant city of Saratoga Springs, NY, just 30 minutes from the state capital and within easy reach of major metropolitan centers like New York City, Boston, and Montreal, Espey offers a unique opportunity to be part of something extraordinary. If you're ready to shape the future and embark on a fulfilling career adventure, join us at Espey. Let's build together! About the job: Embark on a new career journey to shape the future as a Large Magnetics Assembler Technician, where you will be part of a team crafting transformers destined for military and industrial products. The Large Magnetics Assembler connects components to assemble transformers and other various fabricated items, as specified by work orders, diagrams, work instructions, or customer layouts. Unlock your operational skills and production finesse by creating products that protect today’s military. Large Magnetics Assembler Key Responsibilities including, but not limited to: • Build transformers and assemblies using drawings, work instructions, and other documentation., • Prepare and assemble wire connections using crimping, tinning, insulating, and other techniques., • Assemble components, subassemblies, or systems using hand and power tools (manual, electric, or pneumatic)., • Set up and build magnetic cores, steel laminations, and wound coils using stacking, banding, and interleaving methods., • Perform disassembly and rework/repair as needed., • Solder, braze, or epoxy components using soldering irons, torches, and appropriate tools., • Use fixtures, jigs, and calibrated measuring tools to ensure assembly accuracy and quality., • Clean and prep work surfaces for soldering, brazing, or applying adhesives., • Hermetically seal units using solder or braze techniques., • Collaborate with engineering and quality teams to support product improvements and compliance., • Enter data into ERP systems and complete documentation accurately., • Identify and report quality, safety, or equipment concerns to supervisors., • Follow SOPs, safety regulations, and quality standards., • Maintain a clean, organized work area and assist in general housekeeping tasks., • Participate in training and continuous improvement efforts., • Support team goals through effective communication and cooperation. Required Qualifications: • High School Diploma or GED equivalent, • Must be 18 years or older, • Must be able to work full time, • While performing the functions of this job, the employee is frequently required to sit, use hands to finger, handle or feel, and lift up to 50 pounds. The employee is occasionally required to stand, walk, reach with hands and arms, stoop, kneel crawl, talk or hear, and lift up to 100 pounds, • Previous experience in a manufacturing or industrial environments, • Previous experience with assembly or fabrication work prescribed by drawings, sketches, work instructions, • Basic mathematic skills including, but not limited to, addition, subtraction, multiplication, division, and determining ratios, • Ability to use measuring tools including a tape measure, caliper, torque wrench & height gage, • Previous technical training or relevant certifications, • Basic mechanical aptitude and willingness to learn new skills, • Ability to follow work instructions and work effectively in a team environment, • Attention to detail and commitment to quality, safety, and site and product security, • Good communication skills and ability to interact professionally with coworkers and supervisors, • Ability to lift and move heavy objects as needed, • Pay Rate $18.79 – $20.21 per hour, • Four –day work week, • Medical, Dental, Vision, & Life insurance with Employee assistance program, • Flexible spending account & Health savings account Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. Must be US Citizen Job Type: Full-time Pay: $18.79 - 20.21 per hour Benefits: • Dental insurance, • Employee assistance program, • Flexible spending account, • Health insurance, • Life insurance, • Paid time off, • Tuition reimbursement

Job Description Small Magnetics Assembler Technician Come join us at Espey, where we're shaping the future. As industry leaders in manufacturing high-quality power conversion solutions, we specialize in serving mission-critical military and rugged industrial sectors for use in the most harsh & severe environments. With over 90 years of experience, Espey is synonymous with innovation and reliability, providing essential power supplies and transformers that ensure the safety of our military personnel. As a publicly traded company on the NYSE (ESP), we're committed to excellence across all facets of our operation, from design and development to testing and manufacturing. Located in the vibrant city of Saratoga Springs, NY, just 30 minutes from the state capital and within easy reach of major metropolitan centers like New York City, Boston, and Montreal, Espey offers a unique opportunity to be part of something extraordinary. If you're ready to shape the future and embark on a fulfilling career adventure, join us at Espey. Let's build together! About the job: Embark on a new career journey to shape the future as a Small Magnetics Assembler Technician, where you will be part of a team crafting transformers destined for military and industrial products. The Small Magnetics Assembler connects components to assemble transformers and other various fabricated items, as specified by work orders, diagrams, work instructions, or customer layouts. Unlock your operational skills and production finesse by creating products that protect today’s military. Key Responsibilities – Small Magnetics Assembler: • Wind coils for military and commercial use by following wiring diagrams, work orders, and specifications, • Determine wire type, size, and finished dimensions based on job documentation, • Set up coil-winding machines and adjust wire tension, counters, and forming tools as needed, • Monitor winding process to ensure proper shape, turns, and consistency, • Strip, bend, shape, and tin leads; solder wires to terminals and apply insulation sleeves, • Finalize and clean completed coils before moving to the next production stage, • Accurately complete documentation and input data into ERP system, • Work with engineering to support quality, product improvement, and compliance, • Report quality issues, equipment malfunctions, or safety concerns promptly, • Follow all SOPs, safety regulations, and quality standards, • Maintain a clean, organized workspace and participate in continuous improvement initiatives · High School Diploma or GED equivalent · Must be 18 years or older · Must be able to work full time · While performing the functions of this job, the employee is frequently required to sit for long periods of time, have use of hands to finger with dexterity, handle or feel, reach with hands and arms, and lift up to 25 pounds. The employee is occasionally required to stand, walk, stoop, kneel, crouch or crawl, talk or hear, and lift up to 50 pounds. Close vision, ability to adjust focus, and color vision are all required for this position. · Must be US citizen with ability to secure a US Government security clearance; Applicants must meet eligibility requirements for access to export controlled data. Preferred Qualifications: • Manufacturing or assembly experience using drawings, sketches, or work instructions, • Basic mechanical aptitude and ability to follow written and verbal directions, • Strong communication skills; able to read, write, and present information clearly, • Proficient in basic math, including fractions, decimals, percentages, and interpreting simple graphs, • Problem-solving skills and ability to work with minimal variables in structured situations, • Team-oriented, detail-focused, and committed to quality and safety, • Physically capable of lifting/moving heavy objects, • Flexible with work hours and available for overtime as needed Perks at Espey: · Pay Rate $ 17.52 - $18.83 per hour · IBEW Union Pension Plan · Four –day work week · Medical, Dental, Vision, & Life insurance with Employee assistance program · Flexible spending account & Health savings account · Tuition reimbursement for qualified curriculum An Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. Job Type: Full-time Pay: $17.52 - $18.83 per hour Benefits: • 401(k), • Dental insurance, • Employee assistance program, • Health insurance, • Life insurance, • Paid time off, • Vision insurance Schedule: • 10 hour shift People with a criminal record are encouraged to apply Ability to Commute: • Saratoga Springs, NY 12866 (Required) Ability to Relocate: • Saratoga Springs, NY 12866: Relocate before starting work (Preferred) Work Location: In person

Job DescriptionJob description Job Description: Power Supply Design Engineer About Espey: Come join us at Espey, where we’re shaping the future. As industry leaders in manufacturing high-quality power conversion solutions, we specialize in serving mission-critical military and rugged industrial sectors for use in the most harsh & severe environments. With over 90 years of experience, Espey is synonymous with innovation and reliability, providing essential power supplies and transformers that ensure the safety of our military personnel. As a publicly traded company on the NYSE (ESP), we're committed to excellence across all facets of our operation, from design and development to testing and manufacturing. Located in the vibrant city of Saratoga Springs, NY, just 30 minutes from the state capital and within easy reach of major metropolitan centers like New York City, Boston, and Montreal, Espey offers a unique opportunity to be part of something extraordinary. If you're ready to shape the future and embark on a fulfilling career adventure, join us at Espey. Let's build together! About the job: Join our innovative engineering team as a Electrical Engineer, where you will design rugged, high-reliability power conversion solutions for military and industrial applications. You’ll play a key role in the design, analysis, and support of advanced AC-DC, DC-DC, and DC-AC systems, with output power levels exceeding 1KW. Our engineers take projects from concept to production, working in close collaboration with cross-functional teams and end customers. Electrical Engineer Key Responsibilities including, but not limited to: • Design and develop high-performance switch-mode power supplies (SMPS) for military and industrial use, • Utilize a range of converter topologies and control methods to optimize efficiency, power density, and reliability, • Conduct detailed circuit simulation, schematic capture, and design reviews using tools such as Altium and PSpice, • Ensure designs meet applicable EMI/EMC, thermal, and environmental requirements (MIL-STD-704, 461, 810), • Package designs for rugged environments including attention to shock, vibration, and thermal management, • Prepare documentation packages including schematics, bills of materials, test plans, and technical reports, • Troubleshoot issues during prototyping, validation, and production phases, • Interface with customers to interpret specifications and define custom solutions, • Lead or contribute to internal project teams and support qualification testing and certification efforts, • Bachelor’s Degree in Electrical Engineering (BSEE) or related field, • Minimum 5 years’ experience in the design and development of power electronics for high-reliability or MIL-spec applications · 8+ years’ experience in the design and development of power electronics • MSEE or advanced technical degree, • Familiarity with MIL-STD design practices (MIL-STD-704, 461, 810), • Experience with environmental and qualification testing, • Experience with magnetic design or transformer-based power systems, • Hands-on experience with thermal and mechanical integration of power systems, • Familiarity with DoD or defense contractor programs and lifecycle documentation, • Demonstrated experience with power levels exceeding 1KW and a strong understanding of SMPS topologies (e.g., full-bridge, push-pull, buck, boost), • Knowledge of EMI/EMC compliance standards, thermal design principles, and ruggedized packaging, • Proficient in power electronics simulation and design tools (PSpice, Altium, etc.), • Strong analytical and troubleshooting skills, • Pay Range: $65-160k, • Four-day work week, • 401(k) and Employee Stock Ownership Plan (ESOP), • Medical, Dental, Vision, & Life Insurance with Employee Assistance Program, • Flexible Spending Account & Health Savings Account, • Tuition Reimbursement Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. Job Type: Full-time Pay: $65 – 160k Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee assistance program, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Retirement plan, • Tuition reimbursement, • Power electronics or industrial electronics: 5 years (Required) Pay: $65,000.00 - $160,000.00 per year Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee assistance program, • Health insurance, • Life insurance, • Paid time off, • Vision insurance Schedule: • 10 hour shift Ability to Commute: • Saratoga Springs, NY 12866 (Required) Ability to Relocate: • Saratoga Springs, NY 12866: Relocate before starting work (Required) Work Location: In person

Job DescriptionJob description About Espey: Come join us at Espey, where we're shaping the future. As industry leaders in manufacturing high-quality power conversion solutions, we specialize in serving mission-critical military and rugged industrial sectors for use in the most harsh & severe environments. With over 90 years of experience, Espey is synonymous with innovation and reliability, providing essential power supplies and transformers that ensure the safety of our military personnel. As a publicly traded company on the NYSE (ESP), we're committed to excellence across all facets of our operation, from design and development to testing and manufacturing. Located in the vibrant city of Saratoga Springs, NY, just 30 minutes from the state capital and within easy reach of major metropolitan centers like New York City, Boston, and Montreal, Espey offers a unique opportunity to be part of something extraordinary. If you're ready to shape the future and embark on a fulfilling career adventure, join us at Espey. Let's build together! About the job: Embark on a journey to shape the future as an Espey Transformer Design Engineer, crafting cutting-edge transformers destined for military and industrial products. Dive into this dynamic role where you’ll lead and collaborate on design efforts within a project development cycle that ranges from a few weeks to over a year depending on the product type and project scope. Unlock your engineering prowess, business acumen, and production finesse by designing unique and custom products, and collaborate across functions to watch your design come to life. Key Responsibilities including, but not limited to: · Design transformers ranging from small PCB mount to 5 MVA including medium voltage dry type from 60Hz to medium frequency · Design Inductors and Reactors for low and high frequency applications from 60Hz-500kHz · Support design studies for novel transformer design concepts for high power density applications · Develop new, custom magnetics, lead product estimates, & create design documentation based on customer Statements of Work (SOW) and performance specifications. · Provide start to finish ownership of magnetic components – from specification to design, prototype, testing and manufacturing. · Interface with drafting to develop documentation packages to be used for production builds, creating test procedures, and technical reports · Read & understand customer specification and interpret impact on design · Aid in troubleshooting new and legacy transformer product builds · Lead, participate in, and mentor others with magnetic design efforts, core selection, winding methods, insulation systems, & performance estimates · Work with mechanical engineers to develop design reports, review packages, and test procedures & tactics Required Qualifications: · Bachelor of Science in Electrical Engineering or equivalent field of engineering · Minimum 5 years of experience in transformer and magnetic devices · Must be US citizen with ability to secure a US Government security clearance; Applicants must meet eligibility requirements for access to export controlled data. Preferred Qualifications: · Experience in ruggedized products for Military & heavy industrial magnetics or power electronic applications · Experience with magnetics, transformers, inductors, or MILSPEC products for airborne, ground mobile, or Naval applications · Knowledge of Excel, Solidworks, FEA methods, MATLAB or equivalent software · Demonstrated experience with unique & custom design techniques without overreliance on auto-generated software programs · Experience in designs with BIL requirements up to 15kV class and knowledge of dry type transformers up to 5MVA · Experience with core selection, winding design, conductor selection (Litz/Foil/Solid), loss modeling and loss characterization in inductors and transformers. · Knowledge of ANSI/IEEE standards and experience with military standards such as MIL-E-917 · Writing skills that enable technical reports, test procedures, trade studies, and other technical documentation to be quickly and effectively released to customers. · Comfortable navigating complexity and troubleshooting unique problems; requires critical thinking, innovation, determination & resilience, and cross-functional partnerships · Competencies include project management, team leadership, independence balanced with strong cross-functional collaboration skills, bias for action, creativity, engineering prowess, & strong written and verbal communication skills Perks at Espey: · Pay Range $85,000 - $140,000 depending on depth of skills and experience · Four –day work week · Onsite preferred (Relocation provided); Hybrid work is possible; Remote for highly experienced contributors · 401(k) and Employee Stock Ownership Plan (ESOP) · Medical, Dental, Vision, & Life insurance with Employee assistance program · Flexible spending account & Health savings account · Tuition reimbursement HYBRID work is possible Must be US Citizen An Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Job Type: Full-time Pay: $85,000.00 - $120,000.00 per year Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee assistance program, • Flexible schedule, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Tuition reimbursement, • Vision insurance Schedule: • 10 hour shift Work Location: In person

This position is in our specialized portfolio enterprise where we serve diverse businesses who support unique customers or markets, including animal nutrition and health, bioindustrial, road safety salt, and Cargill joint ventures. Benefits: Medical, Dental, Vision, and Prescription Drug Insurance H

Industrial Housekeepers in Frankfort, NY!.

This position is in our specialized portfolio enterprise where we serve diverse businesses who support unique customers or markets, including animal nutrition and health, bioindustrial, road safety salt, and Cargill joint ventures. Benefits: Medical, Dental, Vision, and Prescription Drug Insurance H

This position is in our specialized portfolio enterprise where we serve diverse businesses who support unique customers or markets, including animal nutrition and health, bioindustrial, road safety salt, and Cargill joint ventures. Benefits: Medical, Dental, Vision, and Prescription Drug Insurance H

This position is in our specialized portfolio enterprise where we serve diverse businesses who support unique customers or markets, including animal nutrition and health, bioindustrial, road safety salt, and Cargill joint ventures. Benefits: Medical, Dental, Vision, and Prescription Drug Insurance H

We are seeking an experienced Dispatch Director to lead and optimize the operations of our field labor, equipment, tools, warehouse, and trucking functions.This role is critical to ensuring seamless daily operations, efficient resource allocation, and strong coordination across multiple departments.

Join Our Team As An Industrial Housekeeper. Industrial Housekeepers in Frankfort, NY! Pay rate: $17.

Hohl Industrial Services is a trusted leader in construction and industrial contracting, providing safe, efficient, and high-quality field services across a range of industries. The Labor Superintendent is responsible for managing all field labor operations for Hohl Industrial Services, including fo

Master's degree in industrial hygiene, occupational health, or similar field of study. Currently qualified as a Certified Industrial Hygienist (CIH) or eligible to sit for the examination within 1 year of start date. Experience with the selection and use of industrial hygiene monitoring equipment as

Field/Shop: Active construction and industrial environments-dirty, noisy, non-climate-controlled, and potentially hazardous.

M - [Maintenance Technician] As an Industrial Maintenance Mechanic at 3M, you'll: Repair and maintain industrial machinery and equipment; Troubleshoot mechanical issues and perform preventative maintenance tasks; Inspect and test machinery to ensure proper functioning; Replace defective parts and ma

Completing preventative, predictive, and reactive industrial maintenance throughout the facility. Minimum of one year of experience with maintenance trades in an industrial environment. This position is in our specialized portfolio enterprise where we serve diverse businesses who support unique cust

Industrial Maintenance Mechanic Job Duties: Ensures operation of machinery and mechanical equipment by completing preventive maintenance requirements on engines, motors, pneumatic tools, conveyor systems, and production machines

At CoolSys, we offer more than just a job—we provide stability, growth, and industry-leading benefits for our employees.No wonder Newsweek named CoolSys one of America’s Greatest Workplaces!.As a large company serving diverse customers, we invest in our team with:.Access to state-of-the-art faci

Hohl Industrial is seeking an experienced Heavy Hauling Class-A Driver.

CDM Smith is seeking an Industrial Client Service Leader with a strong industrial water and wastewater background to help further accelerate the growth of our Industrial business unit by identifying promising new opportunities, winning exciting new projects and growing key client accounts. Industria

Review production schedules, engineering specifications, process flows, and other information to understand methods that are applied and activities that take place in manufacturing and services Figure out how to manufacture parts or products, or deliver services, with maximum efficiency Develop mana