Low voltage jobs in Elizabeth, New JerseyCreate job alerts

Company Description Uncommon Schools is a nonprofit network of high-performing public charter schools dedicated to providing an exceptional K-12 education in economically disadvantaged communities. Operating in Boston, Camden, New York City, Newark, and Rochester, we are committed to closing the college completion gap and preparing every student for college and beyond. Our students consistently exceed national benchmarks, reflecting our dedication to their success. We invest deeply in our educators, offering weekly coaching, feedback, and professional development to ensure excellence in teaching and leadership. Join us to work hard, do good, and make a lasting difference! Job Description • Conduct regular inspections of building systems including electrical, plumbing, HVAC, general cleanliness and condition of facility, • Inspect general cleanliness and condition of facility; report and address any deficiencies, • Diagnose mechanical and electrical malfunctions and make recommendations for repair, • Perform plumbing repairs including but not limited to replacing flush-o-meters, metering cartridges, water fountain filters, sink faucets, and the like, • Undertake minor electrical repairs, including low-voltage PA, LAN cabling, change light fixtures, switches, outlets, and ballasts, • Repair and install doors, door closers, and locks, • Prepare and paint walls and woodwork; perform other types of refinishing, • Build, repair, and install counters, cabinets, benches, partitions, floors, doors, and trim, • Conduct spot repairs of VCT flooring and rubber treads, • Perform regularly scheduled maintenance on building systems, • Provide estimates of materials required, • Carefully track expenditures against budgeted allowances ensuring no exceedances, • Establish and maintain effective relationships with school personnel and vendors, • Identify situations that require escalation or elevation to supervisor or manager for guidance or to request additional support, • Perform general maintenance and repair tasks as needed, under direction of on-site facilities manager, • Ensure that work sites and conditions are safe, • Perform assignments to ensure all schools can safely open and function, • Respond to emergency situations and perform vital repairs or act as a point person during a facility emergency regardless of the day or hour, • Work collaboratively with other school employees during emergency operations, • Consistently use the work order system, ensuring that all work performed onsite is documented correctly and updated in a timely manner; ensure work orders are completed and detailed accurately, • Track, document, and maintain all PM inspections and reports for each site, • Maintain an adequate supply of parts used for repairs, and request needed supplies through the established procedures, • Be available to oversee snow removal vendors, • Ensure safe-keeping of company property, and report immediately to managers any damage or vandalism to facilities or theft of equipment, • Protect confidentiality of records and information gained as part of exercising professional duties, • Serve as a role model for students and staff by demonstrating a positive attitudes appropriate attire and grooming, and a dedicated work ethic, • Participate in in-service and workshop programs and meetings as required, • Display ethical and professional behavior in working with students, parents, school personnel, and outside agencies associated with the school, • Adhere to federal statutes and regulations, New Jersey school law, State Board of Education rules and regulations, Uncommon Schools policies and procedures, and contractual obligations, • Perform any duties and responsibilities that are within the scope of employment as assigned by managers and not otherwise prohibited by law or regulation, • 5-6 years of professional experience with 3-4 years of directly related experience, • Exhibit working knowledge of:, • low pressure steam boilers, one and two pipe steam systems, condensate return lines, condensate return pumps, • chillers, 2- and 4-pipe chilled water HVAC systems, and chilled water pumps, • cooling tower operations, cooling tower water circulation pumps, and make-up water controls, • electrical systems including three phase, single phase, and low voltage, • elevator operations and safety requirements, • water treatment laws and practices for boilers, chillers, and cooling towers, • commercial plumbing systems including storm, waste water, sanitary wastewater, hot potable water recirculation systems, cold water supply, and potable water booster pumps, • roofing, masonry, building envelope components and waterproofing Our people are what make us Uncommon. We offer competitive compensation and comprehensive benefits that support the personal health, wellness, and finances of our staff and their families. Our compensation philosophy values equity & fairness and attracting & retaining top talent. Compensation Compensation for this role is between $32/hr to $37/hr. Typically, new hires who fully meet all qualifications listed in the job description will start at $32/hr. Starting compensation below this reflects candidates with less experience or qualifications. Offers near the top end of the range are reserved for candidates who significantly exceed the qualifications, bringing extensive experience and specialized expertise beyond what is listed. Benefits • Comprehensive health, dental, and vision insurance plans + pre-tax flexible spending (FSA), dependent care (DCFSA), and health saving accounts (HSA), • Paid leave of absence options (parental, medical, disability, etc.), • Mental health and counseling support + wellness benefits At Uncommon, we believe that a supportive and welcoming environment helps our students, staff, and community thrive. We are dedicated to building a team that brings a wide range of perspectives and experiences, reflective of the communities we serve---with over 70% of our staff identifying as people of color. Our organization values respect and open dialogue on important topics that shape our school culture. As an equal opportunity employer, Uncommon provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. We also ensure that individuals with disabilities receive all privileges and benefits associated with employment and are provided reasonable accommodations for the interview process and to perform core job functions. If you would like to request an accommodation, please email .

Achieving our goals starts with supporting yours. Grow your career, access top-tier health and wellness benefits, build lasting connections with your team and our customers, and travel the world using our extensive route network. Come join us to create what’s next. Let’s define tomorrow, together. At United, we have some of the best aircraft in the world. Our Technical Operations team is full of aircraft maintenance technicians, engineers, planners, ground equipment and facilities professionals, and supply chain teams that help make sure they’re well taken care of and ready to get our customers to their desired destinations. If you’re ready to work on our planes, join our Tech Ops experts and help keep our fleet in tip-top shape. The sign-on bonus is exclusively for external candidates, internal applicants are not eligible to receive the sign-on incentive. • Requires a thorough knowledge of general building maintenance with emphasis on electrical solving, including AC & DC circuits, high voltage (480), high amperage and some 400 cycle equipment, • Requires experience in industrial wiring and the ability to read and follow wiring schematics and work without supervision, • Journeyman electrical license a plus, • Requires the ability to make low and high voltage repairs to all building electrical equipment, • This includes solving, installation and repair of 110/220/480 volt single and multiphase electrical circuitry and devices, • You should also have some experience in related building equipment and trades, such as air handling units, plumbing and steam fitting, fire systems and conveyors, • Facilities Technicians must be able to work around the clock shifts, including weekends and holidays, in the outdoors in all weather conditions, • Schedules are bid and awarded according to seniority, • Facilities Technicians are represented by the International Brotherhood of Teamsters (IBT), • Salary increases will be administered according to the current IBT/United contract, • New employees are required to join the union within ninety (90) days of employment, • Twenty Four months experience required in at least three of the following areas:, • Electrical (including 480 volt, 3 phase), • Structural (including steel frame construction), • HVAC (including building management systems), • Mechanical (including conveyors), • Plumbing, • PLC electronic/computer controls, • Must have completed high school diploma, GED or equivalent, • Ability to maintain and repair all building disciplines, heavy mechanical and welding, • Work may be indoors or outside or in elevated areas anywhere on airport, • Must be able to climb and work from ladders, and/or walk for extended periods, • Moderate lifting, • Must possess sufficient tooling to perform required tasks, • Computer experience for input and retrieval of data, • Qualified candidates must be immediately available for full time employment, • Must possess a valid, clean, applicable state driver's license What will help you propel from the pack: • Electronics diagnostics and troubleshooting The starting rate for this role is $34.52. This is also a bonus eligible position (i.e. profit sharing). We offer competitive benefits: medical, dental, vision, life, accident & disability, employee assistance program, commuter, paid holidays, paid time off, 401(k), pension and flight privileges (subject to the respective collective bargaining agreement). United Airlines is an Equal Opportunity Employer. We recruit, employ, train, compensate, and promote without regard to race, color, religion, national origin, gender identity, sexual orientation, disability, age, veteran status, or any other protected category under applicable law. We provide reasonable accommodations for applicants and employees with disabilities. To request an accommodation, contact ___

Job Description Job Title: Facilities Maintenance Technician - Building Engineer Location: Newark. NJ Pay: $34/hr Type of Placement: Direct Hire Shift: Must be open to start Job Description The Facilities Maintenance Technician will be responsible for the daily maintenance and repair of building facilities. This includes work on elevators, conveyor systems, mechanical systems, lighting systems, communication/radio systems, air handling/HVAC units, fire systems, plumbing systems, and more. Technicians may also work with PLC electronic systems, computer controls, and steel frame structures. Responsibilities • Perform maintenance and repair tasks on various building facilities including elevators, conveyor systems, and HVAC units., • Work with communication and radio systems, fire systems, and plumbing systems., • Engage in high and low voltage electrical repairs, including installation and repair of 110/220/480 volt single and multiphase electrical circuitry., • Read and follow wiring schematics for industrial wiring tasks., • Thorough knowledge of general building maintenance with an emphasis on electrical systems., • Experience in electrical troubleshooting including AC & DC circuits and high voltage (480) repairs., • Experience in industrial maintenance, electrical maintenance, and preventive maintenance., • Ability to read and follow wiring schematics., • Experience in electronics diagnostics and troubleshooting., • Valid, clean, applicable state driver's license. Enjoy a $10,000 sign-on bonus with half paid after 30 days and the other half after 12 months. Benefit from yearly pay increases, reaching up to $60.00 an hour after 8 years. Experience extremely competitive benefits. Work Environment The work environment includes both indoor and outdoor settings at airport terminals. Be prepared to work on a flexible schedule that covers all shifts, including weekends and holidays. Schedules are bid and awarded based on seniority. Job Type & Location This is a Permanent position based out of Newark, NJ. Pay and Benefits The pay range for this position is $71802.00 - $71802.00/yr. We offer competitive benefits: medical, dental, vision, life, accident & disability, employee assistance program, commuter, paid holidays, paid time off, 401(k), pension and flight privileges (subject to the respective collective bargaining agreement). See attached SOP. Workplace Type This is a fully onsite position in Newark,NJ. Application Deadline This position is anticipated to close on May 12, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Outside Sales Representative – Commercial Security & Low Voltage Territory: Northern & Central New Jersey (Hybrid) Compensation: $150K–$200K+ Total Earnings | $50K–$75K+ Base + Commission Overview A growing provider of commercial security and low-voltage solutions is seeking an experienced Outside Sales Representative to lead business development efforts across Northern and Central New Jersey. This individual will be responsible for identifying, developing, and closing new business opportunities within the commercial market. This is a high-impact, territory ownership role, offering the opportunity to build a book of business in a market with strong demand and high-margin solutions. The ideal candidate brings prior experience in commercial security or low-voltage sales and is comfortable engaging with decision-makers across a range of industries. Position Summary The Outside Sales Representative will manage the full sales cycle, from prospecting through close, while delivering consultative solutions tailored to client needs. This role involves working closely with internal technical and project teams to ensure successful implementation and long-term client satisfaction. Key Responsibilities • Identify and prospect new business opportunities within commercial markets, • Develop and maintain relationships with business owners, property managers, contractors, and key decision-makers, • Conduct on-site consultations to assess client needs and recommend tailored security and low-voltage solutions, • Prepare and present proposals, quotes, and contracts, • Manage the full sales cycle from initial outreach through deal closure, • Collaborate with internal project and technical teams to ensure seamless execution, • Maintain accurate records of sales activity, pipeline, and client interactions within CRM systems, • Consistently meet or exceed monthly and annual sales targets Solutions Sold • Access Control Systems: Card readers, biometric systems, key fob access, cloud-based platforms, • CCTV & Video Surveillance: IP cameras, video management software, remote monitoring, AI analytics, • Burglar & Intrusion Systems: Motion detection, glass break sensors, perimeter security, monitoring services, • Fire Alarm Systems: Detection, notification, monitoring, and compliance solutions Qualifications • 2+ years of B2B sales experience, ideally within commercial security, low-voltage, or related technology solutions, • Hands-on experience selling commercial (not residential) security solutions strongly preferred, • Working knowledge of CCTV, access control systems, alarm systems, and related infrastructure, • Experience with bidding processes and proposal development, • Strong consultative sales, communication, and negotiation skills, • Self-motivated with the ability to manage a territory independently, • Proficiency with CRM platforms (e.g., Salesforce, HubSpot) and Microsoft Office, • Valid driver’s license and ability to travel throughout the territory Compensation & Incentives • Base Salary: $50K–$75K+ (flexible based on experience; up to ~$80K for highly experienced candidates), • Total Compensation:Year 1: Mid-$100Ks, • Long-Term: $200K+ earning potential, • Monthly commissions with high-margin offerings Benefits • 401(k) with company match, • Medical, dental, and vision insurance, • Company-paid short- and long-term disability, • Life and AD&D insurance, • Pre-tax health and dependent care accounts, • Paid time off and holidays, • Tuition reimbursement Work Environment • Hybrid structure: Primarily field-based with work-from-home flexibility, • Minimal office requirement (approximately 1–2 days per month), • Travel throughout Northern and Central New Jersey Why This Opportunity • This role offers the chance to take ownership of a defined territory in a growing division with strong internal support and high-margin solutions. With limited internal competition and significant earning potential, this is an ideal opportunity for a driven sales professional looking to scale their income and impact within the commercial security space.

Job Description Essential HVAC Installer Duties & Responsibilities The primary function is the installation of new or replacement HVAC systems (furnaces, air conditioners, heat pumps, air handlers, etc.) in residential or commercial settings. * System Installation: Installing heating, cooling, and ventilation equipment according to manufacturer specifications and company requirements. * Ductwork: Fabricating and installing sheet metal and flex duct systems, vents, and air distribution components. * Piping & Wiring: Installing copper refrigerant lines (including brazing and soldering), properly connecting gas lines, and wiring both low and high voltage to the equipment. * Blueprint Reading: Interpreting blueprints, schematics, and technical diagrams to plan system layouts and complete installations correctly. * Performance Testing: Performing system start-ups and testing performance, checking refrigerant levels, airflow, and calibrating thermostats. * Compliance: Ensuring all installations comply with local, state, and federal codes, including proper safety procedures and refrigerant handling regulations. * Customer Interaction: Explaining the system operation and maintenance to the customer and ensuring a high level of satisfaction. * Logistics: Pre-measuring jobs to determine material needs, verifying, loading, and stocking company vehicles with equipment and parts. ✨ Key Skills and Qualifications Required Skills & Qualifications Technical: • Proficiency with hand and power tools, • Strong mechanical aptitude and problem-solving skills, • Physical ability to lift heavy equipment (up to 50-100 lbs), • Comfort working in confined spaces (attics, crawl spaces) and on roofs/ladders, • Valid NJ driver's license, • Must have 4 years of experience, • Excellent customer service and communication skills, • High level of attention to detail and commitment to safety, • Ability to work independently and as part of a team We value our team and are committed to supporting your long-term financial well-being. Following one year of continuous employment with our company, you will become eligible for enhanced benefits.

JOB SUMMARY: The E&I QA/QC Inspector is responsible for ensuring that all electrical and instrumentation installations, materials, and testing activities comply with project specifications, applicable codes, standards, and quality requirements. This role supports construction activities through inspection, verification, documentation, and coordination with project teams to ensure safe, reliable, and compliant systems. TYPICAL RESPONSIBILITIES: Inspection & Verification • Perform inspections of electrical and instrumentation installations including:, • Cable tray, conduit, and cable pulling, • Terminations and splicing, • Grounding and bonding systems, • Instruments (pressure, temperature, flow, level devices), • Control panels, junction boxes, and marshalling cabinets, • Witness and document testing activities including:, • Insulation resistance (megger) testing, • Continuity checks, • Loop checks and functional testing, • Calibration verification of instruments, • Prepare and maintain:, • Inspection Test Plans (ITPs), • Quality checklists and inspection reports, • Non-Conformance Reports (NCRs) and punch lists, • Verify material receipt and compliance with specifications:, • Check certifications (MTRs, calibration certificates), • Ensure compliance with:, • Project specifications and client standards, • Industry codes (e.g., NEC, IEC, NFPA), • Work closely with:, • Construction teams, • Engineering and design teams, • Commissioning and startup teams, • Identify and document quality issues, • Track corrective actions and verify closure of NCRs QUALIFICATIONS: Education • High school diploma or equivalent required, • 5+ years of E&I inspection experience in industrial construction (oil & gas, petrochemical, power, or renewables), • NICET (Electrical or Instrumentation), • OSHA 10/30, • Electrical license KNOWLEDGE & SKILLS: • Strong understanding of:, • Electrical systems (low/medium voltage), • Instrumentation and control systems, • P&IDs, loop diagrams, and wiring schematics, • Familiarity with QA/QC processes, ITPs, and turnover documentation, • Ability to read and interpret technical drawings and specifications, • Strong attention to detail and documentation accuracy, • Proficient in QA/QC software and reporting tools WORK ENVIRONMENT: • Field-based role on active construction sites

Job DescriptionJob Title: Electrical Design Engineer – Power Distribution (Switchboards & Panelboards) Job Location: Kearny, NJ In-Office, Hybrid or Remote: On-site Working Hours: Full-time Languages: English required What the Client Offers: * Salary: USD $110,000 – $130,000 * Comprehensive benefits package * Paid time off + 10 company holidays * Tuition reimbursement * 401(k) with strong employer contribution * Stable, growth-oriented environment within a specialized engineering sector * Relocation support available for the right candidate About the Client: Inner Circle Agency is hiring on behalf of a well-established engineering and manufacturing organization specializing in power distribution and electrical infrastructure. The company supports critical industries including energy, telecommunications, and industrial systems, delivering high-performance, safety-compliant solutions. Role Overview: Our client is seeking a detail-oriented Electrical Design Engineer to design low voltage switchboards and panelboards. This role is based in the Kearny, NJ area, with relocation support available for the right candidate. You will play a key role in developing complex electrical systems and collaborating with cross-functional teams to bring designs from concept to production. Key Responsibilities: * Design low voltage switchboards and panelboards in compliance with applicable standards and regulations * Create 3D sheet metal components and flat patterns * Develop complex 3D assemblies with large multi-component BOMs * Produce wiring diagrams including PLCs, relays, breakers, and power systems * Generate 2D drawings including layouts, single-line diagrams, and front views * Collaborate with engineering, manufacturing, and vendors to ensure accurate execution * Translate client requirements into practical and efficient design solutions Qualifications:Required: * Bachelor’s degree in Mechanical or Electrical Engineering (or related field) * 3 to 5 years of experience in an electro-mechanical or similar environment * Strong proficiency in 2D and 3D CAD software (Autodesk preferred) * Solid understanding of electrical systems and design principles * Strong communication and collaboration skills Preferred: * Experience with UL standards (UL891, UL67, UL508A, UL1558) * Familiarity with the National Electrical Code (NEC) * Experience sizing conductors and overcurrent protection devices (OCPDs) * Knowledge of control circuits and electrical logic

Job Description • Maintenance services: Servicing existing POS systems., • Performing cable system maintenance, • Proficiency with low-voltage cabling (Cat5e/Cat6), networking fundamentals, and POS hardware., • Physical Ability: Ability to lift heavy equipment, climb ladders, and work in confined spaces., • Point-of-Sale installation: Installing and testing new POS systems for a variety of retail industries including hospitality, restaurants, grocery stores, fashion stores, service-based businesses and more., • POS troubleshooting & repair: Diagnosing and providing solutions to issues within existing POS devices or equipment.

Job DescriptionJob Title: Senior Electrical Design Engineer (Switchboards / UL891) – Relocation Available Job Location: Kearny, New Jersey (NJ) In-Office, Hybrid or Remote: On-site Working Hours: Full-time Languages: English required What the Client Offers: * Salary: USD $120,000 – $140,000 * Comprehensive benefits package * Paid time off + 10 company holidays * Tuition reimbursement program * Strong 401(k) employer contribution * Long-term growth and leadership opportunities * Relocation support available for the right candidate About the Client: Inner Circle Agency is hiring on behalf of a well-established engineering and manufacturing organization specializing in advanced electrical infrastructure solutions. The company supports large-scale projects across industries such as energy, telecommunications, and industrial systems, with a strong reputation for quality, innovation, and technical excellence. Role Overview: Our client is seeking a Senior Electrical Design Engineer to lead the design of low voltage switchboards and panelboards. This role is ideal for someone with strong technical expertise who also enjoys mentoring junior team members and contributing to complex, high-impact engineering projects. Key Responsibilities: * Design low voltage switchboards and panelboards in compliance with industry standards * Develop detailed 3D sheet metal components and large-scale assemblies (150+ BOM items) * Create wiring diagrams including PLCs, relays, breakers, and control components * Produce and interpret technical drawings including one-line diagrams, layouts, and front views * Collaborate with manufacturing, engineering teams, and external vendors to ensure design accuracy * Support the full design lifecycle, ensuring adherence to internal standards and processes * Mentor and guide junior engineers as needed Qualifications: Required: * Bachelor’s degree in Electrical or Mechanical Engineering (or related field) * 4–8 years of experience in switchboard or panelboard design (UL891 or equivalent environment) * Strong proficiency in 2D and 3D CAD software (Autodesk preferred) * Solid understanding of electrical systems and components * Excellent communication skills and ability to work cross-functionally Preferred: * Experience with UL891, UL67, UL508A, or UL1558 standards * Familiarity with the National Electrical Code (NEC) * Experience sizing conductors and overcurrent protection devices (OCPDs) * Knowledge of control circuits and electrical logic systems

Job Description Job Summary The Switchboard Engineer I is responsible for Designing Low Voltage Switchboards and Panelboards. This role requires great attention to detail and a self-starting mentality. All products must be designed using applicable safety standards & regulations (National Electrical Code, Underwriters Laboratories, etc.). Primary Job Responsibilities • Design 3D Sheet Metal Parts With Flat Patterns, • Complete 3D Assemblies (150+ Item BOM), • Create Wiring Diagrams Using PLCs, Breaker Accessories, Relays, Contactors, Power Supplies etc., • Create & Understand 2D Front View, One-Line/Single-Line & Layout Drawings Using CAD Software, • Ensure Clear Communication Between Engineering, Manufacturing & Other Key Stakeholders, • Work In A Team Environment to Analyze Requirements From Clients & Develop Design Solutions, • Bachelor’s Degree of Science in Mechanical or Electrical Engineering or Similar, • 2-5 Years Of Work Experience (Electro-Mechanical Industry Preferred), • Proficiency In 2D & 3D CAD Software (AutoDesk Suite preferred), • Proficient With Microsoft Office Products, • Experience With UL891, UL67, UL508A or UL1558, • Experience Reading/Understanding National Electric Code, • Experience Sizing Conductors & OCPDs Raycap, Inc. has decades of experience creating products that protect and support the world’s most valuable assets from power and lightning surges. We focus on 5 Core Values of Customer Focus, Talent, Excellence, Innovation and Integrity, and those values show in everything we do. We also believe it is very important to invest in our employees, and we are proud to offer: • A very competitive benefit package, • Paid Time Off, • 10 company paid holidays, • Tuition Reimbursement, • A generous 401(k) employer contribution Raycap is an Equal Opportunity / Affirmative Action Employer. All qualified applicants receive consideration for employment without regard to age, disability, race, color, national origin, sex, marital status, sexual orientation, religion, creed, veteran or military status, or other protected status. We participate in E-verify for all employment verifications. Drug-free workplace

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview: Thea Energy is looking for an experienced, highly motivated Electrical Engineer to join its rapidly growing team. The Electrical Engineer will work collaboratively across a cross-functional engineering team to help develop Thea Energy’s core planar coil stellarator fusion technologies. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. These roles will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems. Key Responsibility Areas: • Design, construct, and operate power supplies and control systems for high-temperature superconducting magnets and plasma heating systems (ECRH)., • Specify, design, develop, fabricate, and commission bespoke electronic systems, encompassing low-signal analog and digital equipment, capable of operating in high-stress industrial environments including high magnetic field, vacuum, and cryogenic temperatures., • Provide comprehensive specifications and facilitate the procurement of commercial off-the-shelf electronic products., • Actively engage in discussions to define requirements for the systems to be designed., • Provide full-cycle project support, from design to operation, including prototyping and testing of samples., • Collaborate and communicate effectively with engineering, physics/science, project management, and procurement groups., • Generate and revise work packages, including electrical drawings and technical specifications., • Manage critical procurement contracts and coordinate with vendors for electrical system design, procurement, and commissioning., • Select and implement industry standards (IEEE, ANSI, IEC, etc.) for use in prototyping projects and the future fusion power plant ecosystem., • Maintain a detailed project schedule, oversee the delivery of externally furnished documentation and equipment, and coordinate subcontractors. Ideal Experience & Skillsets:, • MS, or PhD in Electrical Engineering or related fields., • 5+ years of experience in the design and implementation of electrical and electronic systems in an industrial and/or scientific environment., • Technical proficiency in multiple areas of electrical engineering, including a subset of the following: power conversion, medium voltage distribution, switchgears, protective relaying, low voltage process-industrial facility design, instrumentation, and control., • Experience using PCB design software (Altium)., • Experience using CAD software (AutoCad, Solidworks)., • Experience in designing front-end analog electronics (differential amplifiers, trans-impedance amplifiers, precise and fast voltage comparators)., • Experience in the design and implementation of power electronics components: PWM converters (GaN/SiC/MOSFETs/IGBTs.), DCL-capacitors, high-frequency transformers, and inductors., • Experience using simulation software (PSpice, PLECS, MATLAB, Simulink)., • Nice to have experience with designing DSP- and MCU-based embedded control systems., • Experience in the integration of software and hardware in a high voltage, high current environment would be beneficial., • Experience in pulsed power systems; electrical and mechanical transient analysis and/or design implications in complex power systems., • Demonstrated ability to manage system installation within a complex project. Ability to interface with contractors, vendors, and designers., • Excellent written and verbal communication skills, ability to conduct design reviews, and organize/present material to both expert and non-technical audiences., • Ability to take initiative, work independently, and as part of a team., • Comfortable working to aggressive deadlinesCompany Benefits:, • Salary range $130,000-$150,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Job Description Electrical Project Manager Location: New Jersey Compensation: $95,000 – $120,000 (based on experience) Employment Type: Full-time About Our Client Our client is a well-established electrical contracting firm with over 30 years in business, proudly serving the New Jersey region. Known for their honest, dependable service, they provide complete electrical contracting solutions, including installation and maintenance of electrical, communication, fire alarm, and security systems. With a reputation for tackling projects of all sizes and complexities, they have built strong industry partnerships and resources that ensure project success—whether it’s new construction, modernization, restoration, or ongoing maintenance contracts. Position Overview We are seeking a highly motivated and detail-oriented Electrical Project Manager with proven experience managing large-scale commercial projects involving both low voltage and high voltage systems. The ideal candidate will have the leadership skills to oversee multiple projects, coordinate effectively with clients and subcontractors, and ensure all work is delivered safely, on time, and within budget. Key Responsibilities • Manage all phases of large-scale commercial electrical projects from planning to closeout., • Oversee project schedules, budgets, manpower, materials, and equipment., • Coordinate with engineers, subcontractors, vendors, and clients to ensure smooth project execution., • Review and interpret electrical drawings, specifications, and contracts., • Lead project meetings and provide clear communication regarding progress, issues, and solutions., • Ensure compliance with safety standards, electrical codes, and company policies., • Monitor change orders, RFIs, and submittals throughout the project lifecycle., • Deliver high-quality service and maintain strong client relationships. Qualifications • 5+ years of experience as a Project Manager in commercial electrical contracting., • Strong background in both low voltage and high voltage systems., • Proven ability to manage large-scale commercial projects (new construction, modernization, or restoration)., • Excellent communication, leadership, and organizational skills., • Strong knowledge of project management software and electrical systems., • Ability to work independently and as part of a team in a fast-paced environment., • Valid driver’s license and reliable transportation required. Compensation & Benefits • Competitive salary: $95,000 – $120,000, commensurate with experience., • Comprehensive benefits package (medical, retirement, PTO)., • Opportunities for long-term career growth with a trusted and established firm. EQUAL EMPLOYMENT OPPORTUNITIES NorthPoint Staffing, LLC provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all employment terms and conditions, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. CONFIDENTIALITY The content of this message is confidential. If you have received it by mistake, please inform us by email by replying to this message and then delete the message. It is forbidden to copy, forward, or reveal the contents of this message to anyone. The integrity and security of this email cannot be guaranteed over the Internet.

Key Responsibilities for Low Voltage Systems and Audio/Visual Technicians Instructors. Teach and provide hands-on training in Low Voltage, Telco, Networking, and Audio Video Systems in our fully equipped facility. Key Requirements for Low Voltage Systems and Audio/Visual Technicians Instructors.

Position Title Business Development Manager: LV Power Distribution—Healthcare Vertical (Remote - Southeast Region) Location Southeastern Remote About the Role Siemens is looking for a Business Development Manager focused on the Healthcare market. This person will report to the National Healthcar

Knowledge of telephone systems and IP phone systems. Lincoln Tech is hiring Low Voltage Systems and Audio/Visual Technicians to become inspiring instructors in our Electrical and Electronic Systems program! If you're passionate about educating and inspiring future professionals, we want to hear from

Installation, troubleshooting, repair, and termination of Cat 5e, 6, coax, and fiber.Experience with video & security systems, including running video/audio cabling, DVR system setup & troubleshooting is a major plus.Experience with running phone lines, punch down blocks, & line/extension troublesho

Job Description Job Title: Field Service Technician / Operator Salary: $30/hr-$35/hrLocation: Northern New Jersey / New York City Company Overview:Drive Integration, LLC (DI) is a certified Disadvantaged Business Enterprise (DBE) and Women-Owned Small Business (WOSB) specializing in infrastructure design, network engineering, hardware/software integration, installation, and equipment vending services. We support agencies and businesses with innovative technology solutions and are proud to serve major clients including NJDOT, SEPTA, PennDOT, and others across the Mid-Atlantic region.Position Description:The Field Service Technician will play a key role in maintaining and supporting our clients' technology infrastructure and equipment in the New Jersey/New York City area. This role involves providing onsite and remote technical support, maintaining equipment, and ensuring optimal functionality of network and security devices, camera systems, and traffic monitoring systems. This position will work closely with customers and internal teams to address technical issues and deliver a high level of service. Responsibilities include: • Conducting remote and onsite inspections of enforcement systems (e.g., camera housings, poles, signage)., • Maintaining and troubleshooting network devices, camera systems, access control, and vehicle tag readers., • Performing firmware and configuration updates on network systems., • Incident coordination in ITSM tool, • Documenting maintenance activities and repair solutions., • Collaborating with support teams to ensure systems are fully functional and aligned with customer needs., • Remote technical support for systems users, • Explaining issues and solutions clearly to clients., • Building and maintaining customer relationships., • Performing additional duties as assigned.Requirements:, • Valid driver’s license and clean driving record., • Strong familiarity with hand tools, power tools, generators, low voltage electrical systems, and camera technologies., • Relevant experience in traffic or road construction, or similar fields., • Ability to perform work on roadside structures, operate bucket trucks, and conduct repairs on toll and network systems., • Availability for flexible shifts, including weekends and on-call rotation., • Physical capability to perform tasks that include bending, lifting up to 50 lbs., and working in confined spaces., • Proficiency in MS Word, Outlook, Excel, and Teams., • Knowledge of LAN/WAN fundamentals and troubleshooting experience with Windows and MS Office., • Strong English communication skills, with additional languages (Spanish, French, or German) as a plus. Drive Integration, LLC is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Job Description The Switchboard Engineer II is responsible for Designing Low Voltage Switchboards and Panelboards. This role requires great attention to detail with a preference for self-starting mentality. All products must be designed using applicable safety standards & regulations (National Electric Code, Underwriters, Laboratories, etc). The Engineer will also be responsible for mentoring and leading other team members as needed. Primary Job Responsibilities: • Design 3D sheet metal parts with flat patterns, • Complete 3D Assemblies (150+ Item BOM), • Follow design life cycle states and design standards, • Create wiring diagrams using PLCs, breaker accessories, relays, contractors, power supplies, etc., • Create and understand 2D Front View, One-Line/Single-Line and Layout drawings using CAD Software, • Ensure clear communication between Engineering, Manufacturing and other key stakeholders., • Work in a team environment to analyze requirements from clients and develop design solutions, • Bachelors of Science degree in Mechanical or Electrical Engineering or similar, • 4 - 8 years of professional experience (working for UL891 OEM or Equivalent), • Proficiency in 2D and 3D CAD software (Autodesk Suite preferred), • Proficient with Microsoft Office Products, • Experience with UL891, UL67, UL508A or UL1558, • Experience reading/understanding National Electric Code, • Experience sizing conductors and OCPDs, • Experience with Control Circuits and Logic Who are we: Raycap Inc. creates products that protect and support the world’s most valuable assets. We design and support advanced solutions for telecommunications, industrial, renewable energy, transportation, defense and other applications worldwide. We offer: • A competitive benefit package, • Paid Time Off, • 10 company paid holidays, • Tuition Reimbursement, • A generous 401(k) employer contribution Raycap is an Equal Opportunity / Affirmative Action Employer. All qualified applicants receive consideration for employment without regard to age, disability, race, color, national origin, sex, marital status, sexual orientation, gender identity, religion, creed, veteran or military status, or other protected status. We participate in E-verify for all employment verifications. Drug-free workplace.

Job Description About US Vanderweil Engineers is a top ranked national full-service engineering firm specializing in MEP/FP, and technology services. Working in multiple sectors including Mission Critical Data Centers, Science & Technology, Academic, Healthcare and Commercial buildings. For over 75 years with a staff of 500+ located across nine offices, we are proud to be one of the leading independently owned engineering firms in the country. We offer mentorship, growth and stability in an ever-changing volatile environment. Join us to do the best work of your career as an Electrical Engineer on our growing team in either our Newark, NJ or our Philadelphia, PA office. What You will Achieve We are looking for an Electrical Engineer with 5+ years of experience in electrical consulting Engineering field to join Vanderweil as an Electrical Engineer. You will be involved in: • Work with Sr. Engineers and Project Managers to understand project goals and requirements, • Participate in meetings / discussions with the team members, including the owner, project architect, and other internal and external project disciplines., • Part of project team in designing the building infrastructure, including medium Voltage and Low Voltage electrical service, main electrical distribution equipment, building distribution equipment., • Document design calculations and design path decisions., • Model electrical distribution systems with our analysis software., • Perform electrical load calculations and electrical engineering studies., • Use Revit to model electrical systems is a plus., • 6+ years of related experience, • FE and or PE preferred, • Bachelor’s degree in Engineering, • Revit knowledge is a plus, • Understanding of the NEC, IBC and IECC. We know that work/life integration is important to our employees. Our hybrid work style (up to 2 days remote per week) allows team members to have flexibility while building their skills through in-person exposure to industry experts. We prioritize wellness with programs that support physical and behavioral health, and we’re proud to foster an equitable and inclusive workplace. Learn more about our culture at . The compensation that we expect to pay for this position is commensurate with years of experience, project portfolio, geographic location, professional licensure and education and is expected to range in the $95,000 to $140,000 range.

Job DescriptionWachter's greatest asset is the people who work here. Join the Wachter family and chart your career path! We are seeking experienced Fire Alarm/Intrusion/Burglar Installation Technicians to join our growing team. This role involves installing, troubleshooting, and maintaining fire alarm systems across various commercial and retail locations nationwide. Ideal candidates will have strong technical skills, a commitment to safety, and the flexibility to travel extensively. We seek self-motivated and reliable technicians who can work independently and find solutions to complete the job. Long-term employment with competitive pay and exceptional benefits for qualified candidates. We value relationships and invest in our employees. Why Wachter? • Full-time work, • Competitive Compensation based on experience, • Paid weekly, • Per-Diem paid when overnight travel is required, • Company vehicle provided, in some cases, after initial 2-4 weeks of employment, • Drive time and mileage paid for use of personal vehicle when travel is required, • Paid Vacation and Holidays, • Opportunities for certification and career advancement, • Supportive team environmentBenefits Package- Company Paid!, • Medical, Dental, Prescription & Vision Benefits, • Life, AD&D, and LTD insurance, • Paid Vacation and Holidays, • Company-Matched 401(k) and IRA Retirement Savings.Key Responsibilities:, • Installation, troubleshooting, and maintenance of fire alarm systems infrastructure., • Running low-voltage cabling in commercial buildings, including drilling concrete walls and limited conduit work., • Installing cable support structures such as j-hooks, cable racks, and innerduct., • Conducting tests to ensure all newly installed cable systems and component devices are operational., • Troubleshooting issues with cable networks and fire alarm panels., • Ensuring all installations and repairs comply with NFPA standards, including NFPA 70 and 72., • Collaborating with team members on pre-installation design and planning., • Maintaining accurate and detailed records of all work performed., • Adhering to all required project safety requirements as set forth by Wachter, our customers, or OSHA.Qualifications:, • Proven experience in field installation within security and life safety environments: Fire Alarm and/or Intrusion., • In-depth knowledge of NFPA standards, especially NFPA 70 and 72., • Experience reading blueprints and site maps., • Comfortable working at heights of 20–60 feet using lifts., • Ability to work in cramped spaces and operate BOOM or scissor lifts., • Proficiency with smartphones, computers, email, spreadsheets, and Microsoft Office., • Possession of basic PPE and reliable transportation during the initial training period., • Valid driver’s license with a clean driving record (no DUI/DWI in the last 3 years)., • Availability for extensive travel (2–6 weeks at a time) and flexible shifts including nights and on-call work.Preferred Qualifications:, • Knowledge of cabling infrastructure and conduit installation, • NICET Level 2 certification or State-required licenses., • Ability to identify independent colors and learn color codes.

Job Description The Switchboard Engineer I is responsible for Designing Low Voltage Switchboards and Panelboards. This role requires great attention to detail with a preference for self-starting mentality. All products must be designed using applicable safety standards & regulations (National Electric Code, Underwriters, Laboratories, etc.) Primary Job Responsibilities: • Design 3D sheet metal parts with flat patterns, • Complete 3D Assemblies (150+ Item BOM), • Create wiring diagrams using PLCs, breaker accessories, relays, contractors, power supplies, etc., • Create and understand 2D Front View, One-Line/Single-Line and Layout drawings using CAD Software, • Ensure clear communication between Engineering, Manufacturing and other key stakeholders., • Work in a team environment to analyze requirements from clients and develop design solutions, • Bachelors of Science degree in Mechanical or Electrical Engineering or similar, • 3 - 5 years of professional experience (Electro-Mechanical industry preferred), • Proficiency in 2D and 3D CAD software (Autodesk Suite preferred), • Proficient with Microsoft Office Products, • Experience with UL891, UL67, UL508A or UL1558, • Experience reading/understanding National Electric Code, • Experience sizing conductors and OCPDs, • Experience with Control Circuits and Logic Who are we: Raycap Inc. creates products that protect and support the world’s most valuable assets. We design and support advanced solutions for telecommunications, industrial, renewable energy, transportation, defense and other applications worldwide. We offer: • A competitive benefit package, • Paid Time Off, • 10 company paid holidays, • Tuition Reimbursement, • A generous 401(k) employer contribution Raycap is an Equal Opportunity / Affirmative Action Employer. All qualified applicants receive consideration for employment without regard to age, disability, race, color, national origin, sex, marital status, sexual orientation, gender identity, religion, creed, veteran or military status, or other protected status. We participate in E-verify for all employment verifications. Drug-free workplace.

Urgently Hiring for Low Voltage Technician Roles in Elizabeth, NJ.

Expand your professional horizons! Join a well-over 20 years established, fast-growing firm and contribute to an open culture of teamwork where creativity and new ideas are not only encouraged, but rewarded.We are seeking a bright, creative, energetic to further expand the reach of our Low Voltage s

Job Description This position is responsible for assembling in-house manufactured parts and vendor-supplied components into sub-assemblies and finished rotating machinery. The role also includes evaluating and repairing returned equipment. Quality, safety, and accuracy are essential to ensure machinery performs reliably and supports company profitability and customer satisfaction. Essential Duties: • Review work orders and pull required parts from inventory., • Verify all parts, finishes, and paint meet quality plans and customer specifications., • Assemble components to ensure proper fit, alignment, and function., • Test assemblies with engineering support and document results., • Follow safety protocols when handling parts ranging from 1 lb. to several tons., • Meet standard assembly times and on-time delivery goals., • Install bearings using hydraulic presses, induction heaters, and hand tools., • Align direct and belt-drive systems., • Set proper bolt torque and clearances., • Uses cranes, hoists, and lifts safely., • High School Diploma or GED, • 3+ years' experience installing bearings for high-speed equipment., • 2+ years' experience installing drive components, belts, and couplings, including performing alignments., • Experience with light wiring for low and high voltage systems (up to 250 HP, 460/3/60)., • Ability to lift and handle components ranging from 1 lb. to several tons (with proper lifting equipment)., • Ability to stand, bend, and reach for extended periods. $46,672 - $ 79,318 Salaries will vary and may be above or below this range commensurate with several factors including experience, education, training, location, and merit. Hosokawa Micron Powder Systems provides equal employment opportunities to applicants and employees without regard to race; color; sex; gender identity; sexual orientation; religious practices and observances; national origin; pregnancy, childbirth, or related medical conditions; status as a protected veteran or spouse/family member of a protected veteran; or disability. Hosokawa Micron Powder Systems is committed to providing reasonable accommodation to, among others, individuals with disabilities and disabled veterans. If you need an accommodation because of a disability to search and apply for a career opportunity with Hosokawa, please send an e-mail to to let us know the nature of your accommodation request and your contact information.

Job Description Company Overview Our client is an IT and Voltage Services provider with expertise in deep niche education, real estate, and construction markets. They lead with integrity and transparency, while offering innovative solutions and excellent customer-focused experience. Job Overview Our client is seeking a highly skilled Senior Low Voltage Foreman to lead and oversee field operations for commercial low voltage projects. This role requires strong hands-on technical expertise across systems such as CCTV, access control, structured cabling, AV, and networking, along with proven leadership experience managing crews in the field. The Senior Foreman is responsible for executing projects safely, efficiently, and in alignment with project specifications, while coordinating with project managers, clients, subcontractors, and internal teams. Location: Newark, NJ Schedule: Full-time – In-person (Flexibility required to meet project demands, including occasional overtime and off-hours work) Salary: $40-$50 (DOE) Benefits: Competitive hourly pay and benefits (health, dental, vision, 401k), PTO and paid holidays, Supportive and team-oriented culture, Opportunity to grow with a rapidly expanding organization. Responsibilities Field Leadership & Execution • Lead, supervise, and mentor field technicians and installers on job sites, • Execute installations of low voltage systems, ensuring adherence to design and specifications, • Collaborate effectively to ensure alignment on schedules, scope, and deliverables, • Coordinate daily field activities, manpower, and material needs, • Install, test, and troubleshoot low voltage systems including CCTV, access control, cabling infrastructure, AV, and networking, • Interpret blueprints, schematics, and technical drawings, • Enforce company safety policies and OSHA regulations on all job sites, • Conduct site safety checks and ensure proper use of tools and equipment, • Track daily work logs, material usage, and field reports, • Assist with as-built documentation and project closeout requirements Experience • 5+ years of hands-on experience in the Low Voltage industry, • Strong expertise in low voltage systems including CCTV, access control, structured cabling, AV, and networking, • Ability to lead, motivate, and manage field teams effectively, • Clear communication with project managers, clients, and team members, • Highly organized with strong attention to detail, • Ability to manage multiple priorities and adapt to changing job site conditions EEO Statement Topaz HR is an Equal Opportunity Employer, and we do not discriminate on the basis of race, color, religion, gender, national origin, age, disability, or any other status protected by applicable law. We value and are committed to creating an inclusive environment for all employees. Please Note: Topaz HR is conducting this search on behalf of one of our clients. The employer's name will be disclosed during the interview process, and all hiring decisions will be made directly by the client. Powered by JazzHR n6mtYYA5NK

As Product Marketing Specialist, you will utilize your skills and capabilities to design, develop and implement the product marketing, positioning, and go-to-market strategy for our low voltage circuit breakers product lines. Candidates must already have a work authorization that allow them to work

Securitas - - Responsibilities: Monitor and control facility during daily tours; Maintain a daily log of security incidents; Greet and assist visitors in a professional and courteous manner; Ability to stand and walk for extended periods of time; Weekend and holiday availability required.

Metro One Security - 900 South Avenue - Responsibilities: Provide excellent customer service.Watch CCTV camera system and notate accurately in a daily activity report.Observe, survey, and provide reporting on activity at your assigned location.Provide rapid response in critical situations.

Allied Universal - - Responsibilities: Manage access control and monitor entry points; Verify credentials and shipments as required by site guidelines; Respond to incidents, alarms, and critical situations; Conduct regular and random patrols around the location; Deter unauthorized access and report

Andy Frain Services - - Responsibilities: Control of entrances and movement of pedestrian and vehicle traffic.Patrol of buildings and perimeters.Escort of material and personnel.Inspection of security and fire exposures.Complete Daily Activity Reports, Log Book entries, Incident Reports.

Allied Universal - - Responsibilities: Provide customer service to tenants, visitors, and/or property staff by carrying out security-related procedures, site-specific policies, and when appropriate, emergency response activities at a commercial real estate location.Respond to incidents, disturbance

Security Guard] - Competitive Pay Structure ($21-$24 per hour) / Flexible Schedules (FT, PT, and Weekend Only Shifts) / Industry-leading Training / 401(k) Retirement Plan - As an Armed Security Officer at Tactical Response Security, you will: Secure the premises by patrolling regularly and monitorin

CarePoint Health - - Responsibilities: Reports all doors that are left open after hours or unattended offices; Directs visitors, patients, vendors to correct locations; distributes passes; Performs unit/building clock tours daily; Conducts security rounds for safety violations; Monitors cameras / a

Metro One Security - 900 South Avenue - Responsibilities: Monitor CCTV systems and keep accurate daily reports; Observe and report on activities at your location; Respond swiftly in critical situations.

CarePoint Health - - Responsibilities: Reports all doors that are left open after hours or unattended offices; Directs visitors, patients, vendors to correct locations; distributes passes; Performs unit/building clock tours daily; Conducts security rounds for safety violations; Monitors cameras / a

Allied Universal - JobID: 1540611 [Safety Officer / Security Guard] As a Security Officer at Allied Universal, you'll: Ensure the facility is provided with high quality security services to protect people and property; Report safety concerns, security breaches and unusual circumstances both verbally

CarePoint Health - - Responsibilities: Reports all doors that are left open after hours or unattended offices; Directs visitors, patients, vendors to correct locations; distributes passes; Performs unit/building clock tours daily; Conducts security rounds for safety violations; Monitors cameras / a

Allied Universal - JobID: 1540548 [Security Officer] As a Security Guard at Allied Universal, you'll: Be responsible for the Security and Safety of the client's property and personnel; Know all site-specific policies and procedures, and implement emergency response activities as appropriate; Handle

Metro One Security - 2810 Morris Avenue - Responsibilities: Provide excellent customer service; Watch CCTV camera system and notate accurately in a daily activity report; Observe, survey, and provide reporting on activity at your assigned location; Provide rapid response in critical situations.

Allied Universal - JobID: 1539221 [Security Officer] As a Security Guard at Allied Universal, you'll: Be responsible for the Security and Safety of the client's property and personnel; Know all site-specific policies and procedures, and implement emergency response activities as appropriate; Handle

USI) - - Responsibilities: Patrol premises and monitor surveillance equipment and access points.Drive/patrol property including residences, facilities, and parking lots.Investigate and report security breaches, open doors, incidents, and other suspicious activity to the shift supervisor.Enforce all

Allied Universal - - Responsibilities: Provide customer service by carrying out security-related procedures, site-specific policies, and/or appropriate emergency response activities across an educational location.Respond to incidents, disturbances, and/or critical situations in a calm, problem-solv

Securitas - - Responsibilities: Monitor premises and patrol assigned locations; Enforce site regulations and directives; Provide customer service and information to clients' employees and customers; Walk outdoors and stand for extended periods; Maintain a safe and secure environment.

Paragon - - Responsibilities: Controls access to client site or facility through the admittance process; precludes unauthorized access to facilities, and the conversion, theft or intentional destruction of physical assets; Responds to unusual or emergency situations using the appropriate escalation

Securitas - - Responsibilities: Actively monitor the premises; Patrol a variety of locations; Preserve order while enforcing regulations and directives; Provide customer service and information to clients' employees and customers; Support safety and security of client sites.

Security Guard] - Competitive Pay Structure ($16-$20 per hour) / Flexible Schedules (FT, PT, and Weekend Only Shifts) / Industry-leading Training / 401(k) Retirement Plan - As an Unarmed Security Officer at Tactical Response Security, you will: Patrol and monitor designated areas to prevent theft, v

Securitas - - Responsibilities: Check bags and screen guests to ensure overall safety; Control arena access by verifying tickets and credentials; Manage crowd control issues during events; Provide friendly guest services and direction; Ability to respond effectively during emergency or stressful si