Trabajos low voltage en Westfield, New JerseyCrear alertas

Sysco is Now Hiring Diesel Fleet Techs Lvl. III in Northampton, PA! \nEarn $28.17 - $42.21 per Hour* Plus a $600 Annual Tool Allowance \nComprehensive Benefits Package \n\n We offer our colleagues the opportunity to grow personally and professionally, to contribute to the success of a dynamic organization, and serve others in a manner that exceeds their expectations. We’re looking for talented, hard-working individuals to join our team. Come grow with us and let us show you why Sysco is at the heart of food and service. \n\n Benefits: \n\n\n\t • Earn $28.17 - $42.21 per hour*\n\t, • $600 annual tool allowance\n\t, • Annual boot allowance\n\t, • Paid vacation and holidays\n\t, • Ongoing job skills and leadership development training\n\t, • Career growth opportunities – we promote from within!\n\t, • Comprehensive healthcare benefits\n\t, • Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet\n\t, • Perform FAI/CVI (annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies (includes all state-required inspections and frequencies)\n\t, • Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, refrigeration units (reefer), lift-gates, light-duty vehicles, and any other company-owned equipment\n\t, • Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment\n\t, • Perform preventive maintenance, diagnosis and repair to refrigeration units (reefer)\n\t, • Address all Driver Vehicle Inspection Report write ups timely, and efficiently\n\t, • Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems\n\t, • Follow procedures including documenting all work performed on work orders\n\t, • Mentor, teach and share expertise with Fleet Technician I and II to aid in their development to positions of greater responsibility\n\t, • May perform moderate supervisory roles when Fleet Manager or Fleet Supervisors are not accessible\n\t, • Proficient in electrical meter testing\n\t, • Knowledge of controls and electrical systems (DC, low-voltage)\n\t, • Electric motor knowledge (DC)\n\t, • Education\n\t\n\t\t, • High school diploma or GED\n\t\t, • Current and valid driver's license (CDL preferred, not required)\n\t\n\t\n\t, • Experience\n\t\n\t\t, • Medium / Heavy Duty truck technical training\n\t\t, • 2-year school and 4 years of experience OR 5 years of experience in fleet maintenance and repair\n\t\n\t\n\t, • Certifications, Licenses, and Registrations\n\t\n\t\t, • Annual Inspector Certification knowledge, skills, and abilities\n\t\t, • Brake Inspector Certification knowledge, skills, and abilities\n\t\t, • ASE certifications; automotive or medium/heavy duty trucks\n\t\t

Project Manager II 🏭 Manufacturer of Custom Low Voltage Switchgear 📍 Full-time, On-site: Union, New Jersey 💰 Salary Commensurate with Experience -- The Company & Opportunity Our client is a third-generation family-owned, US manufacturer with a 75-year legacy of power system engineering excellence. They take pride in being a long standing pillar of the power distribution industry, and their current chapter is the most exciting yet. Under new leadership that stepped in five years ago, the organization has transformed into a high-growth industry leader, outcompeting global giants through speed, flexibility, and engineering excellence. The organization has recently expanded to a national footprint to meet record-breaking demand across data centers, healthcare, and renewable energy. They've recently acquired a second state-of-the-art production facility as part of a broader strategic initiative to expand capabilities and build the systems of the company's future. Here, you will work in a fast-paced environment alongside industry veterans on critical electrical infrastructure products - critical to grid resilience - while having a direct impact on the production floor. The Role This is a high-impact role for a technically grounded Project Manager who wants to be at the center of a rapidly scaling operation. You'll serve as the primary liaison for complex, engineered-to-order projects, bridging the gap between customers, engineering design, manufacturing, and final delivery. Reporting to the Project Manager Supervisor, you'll ensure every customer project is executed to order, on time, and within budget. Primary Responsibilities • Project Leadership: Plan and direct all activities for designated engineering projects, ensuring goals are accomplished within the prescribed timeframe and quality standards., • Technical Interpretation: Evaluate customer specifications and drawings to create accurate bills of materials (BOM)., • Design & Submittal Review: Review engineering submittals for technical and contractual accuracy and oversee the initial design of electrical distribution equipment., • Cross-Functional Synergy: Collaborate daily with sales, engineering, and manufacturing teams to move projects through the production lifecycle., • Customer Advocacy: Provide direct post-sales support, managing change orders, resolving site-level challenges, and coordinating final deliveries. Who We’re Looking For Must Have: • Industry Experience: 5+ years of experience within the power distribution technology sector, ideally with low- or medium-voltage switchgear, UL 891 switchboards, UL 67 panelboards, circuit breakers, transfer switches, PDUs, etc., • Technical Foundation: Bachelor’s degree in Electrical or Mechanical Engineering, • Compliance Mastery: Working knowledge of relevant UL standards (UL891, UL1558, UL67, UL50 or UL50E)., • PMP Preferred, not required Note: This is a full time onsite role in Union, New Jersey, to ensure tight coordination with local engineering and manufacturing teams.

About the Company: At Lincoln Electric Products Co. Inc., We Specialize In The Design, Manufacture, And Distribution Of Custom Equipment Tailored To Meet The Specific Applications And Requirements Of Our Customers. Our Product Range Includes: • Panelboards: Up to 2000A, • Service and Distribution Switchboards: Up to 8000A, • Generator Connection Boxes, • Generator Output Switchboards, • Single and Double-Ended Substations, • We pride ourselves on delivering high-quality, custom-designed solutions that address the unique needs of our clients across various industries. Position Summary Lincoln Electric Products Co. Inc. is seeking a highly motivated and experienced Assembly Manager to join our team in Union, NJ. This individual will play a critical role in overseeing the daily operations of the assembly department, driving efficiency, and ensuring the seamless execution of organizational goals. The Assembly Manager will work collaboratively across departments to enhance productivity, implement process improvements, and contribute to the overall success of the business. While this role primarily operates Monday through Friday, occasional Saturday work may be required based on business demands. This full-time, exempt position reports directly to the Director of Operations and involves a hands-on approach. Working Conditions: Office/Shop Environment Primary Job Function: • The Low-Voltage Switchboard Assembly Manager oversees the factory's production (including EV) and assembly of low-voltage switchgear systems., • This includes managing operations and personnel involved in the assembly process to ensure efficient production, high-quality output, and timely delivery., • The role demands strong leadership, operational expertise, and a focus on continuous improvement in a unionized manufacturing environment. Key Job Responsibilities: • Production Planning: The Assembly Manager is responsible for developing production plans, scheduling work activities, and ensuring the availability of necessary resources, such as materials, tools, and equipment, to meet production targets., • Quality Control: They are responsible for implementing quality control measures and ensuring that all assembled switchgear systems meet the required standards and specifications. This includes conducting regular inspections, tests, and audits to identify and address any quality issues., • Process Improvement: The Assembly Manager continually looks for opportunities to improve the assembly process, optimize workflow, and enhance productivity. They may collaborate with engineering teams to implement process enhancements, introduce automation, or streamline operations., • Team Management: This role involves leading and supervising a team of assembly technicians and operators. The Assembly Manager provides guidance, training, and support to ensure that employees perform their tasks effectively and efficiently., • Safety and Compliance: They are responsible for enforcing safety protocols and ensuring compliance with relevant industry regulations and standards. This includes maintaining a safe work environment, conducting safety training, and addressing any safety concerns or incidents., • Inventory Management: The Assembly Manager oversees inventory levels, ensures the availability of required components and materials, and helps manage stock control to avoid shortages or excesses., • Collaboration and Communication: They collaborate with other departments, such as engineering, procurement, and quality assurance, to coordinate activities and address any cross-functional issues. Effective communication with stakeholders, such as customers and suppliers, is also essential., • Performance Monitoring and Reporting: The Assembly Manager tracks production performance, monitors key performance indicators (KPIs), and prepares regular reports to evaluate productivity, quality, and other relevant metrics. They analyze data and provide recommendations for improvement., • Experience working in a union shop and familiarity with union labor laws should be preferred. Job Requirements: • 3-5+ years of working experience in custom metal fabrication electrical equipment in an industrial setting., • Ability to read blueprints, bill of material (BOM’s), schematics, diagrams, and technical orders to determine best methods and sequences of product assembly., • An effective leader who can help level load the factory and can plan a lookout for 3-4 weeks so that the company’s overhead expenses for overtime in the shop stay within budget., • Should be a Team Player and an Inclusive Leader., • Knowledge about hand tools and measuring devices., • Knowledge about EV products., • Knowledge of Low Voltage or Medium Voltage Switchgear or components., • Should have a particularly good understanding of Operational Excellence process improvements., • A bachelor’s degree in engineering., • Certification in Six Sigma or other process improvement methodologies is preferred.

About Diversified: Diversified is a global leader in audio visual and media innovation, recognized for designing and building the world's most experiential environments. Our award-winning team specializes in delivering solutions for the most complex, large-scale and immersive installations. Serving a global clientele that includes major media organizations and retailers, sports and live performance venues, corporate enterprises, and government agencies, Diversified partners with clients to create spaces that bring people together and keep them coming back. What to Expect: At Diversified, we're on a mission to create a world without boundaries, where technology enables all people to connect and experience the moments that matter, wherever they choose to be. With clients spanning the globe and an exciting pipeline of projects across industries, Diversified offers more than just a job. We offer a career path with the flexibility to grow personally and professionally, wherever your ambitions take you. As a Diversified associate, you'll dive headfirst into big, complex, and rewarding projects that push the boundaries of what's possible. Plus, you'll enjoy a flexible work environment, competitive compensation and benefits, and a culture that celebrates diversity and inclusion. IF YOU CAN DREAM IT, YOU CAN DO IT AT DIVERSIFIED. How You'll Contribute: The Installation Superintendent is responsible for performing a wide variety of installation duties on technology projects for our clients. This position is the key field position for on-site direction of work and the actual work that gets done in our clients' buildings. The Installation Superintendent needs to coordinate closely with project management, building contractors and others to manage all on-site installation activity. This position is a combination of Senior Install Tech and On-site Project Manager focused on the installation activity on the job site. This position does not directly manage personnel, (direct reports) but does manage the installation projects and ensures the installation occurs on time with no interruptions. This position is key in working with project managers and installation staff to resolve roadblocks for successful completion. This position is also responsible for ensuring the highest quality of installation work. Although this position can do some actual install work it is mostly focused on the site management functions listed. Covers the territory of NY and NJ What You'll Do: • Leads and delegates tasks to multiple install crews, subcontractors and union trades. Will be required to regularly lead a team on large projects, • Oversee all field operations and report progress, status and issues to project manager, • Supervises the physical installation of a wide variety of technology into a wide variety of locations, • Maintains all quality control on jobsite, checking all work from employees, subcontractors and union trades. Managing any discrepancies in our standards, • Able to read and understand functional design drawings and cable riser diagrams, • Provide a consistent level of technical performance as well as flexibility in work schedule. This position requires periodic overtime, weekends and may require overtime for extended periods to meet deadlines, • Able to complete assignments in accordance with or better than established task durations as well as estimate task durations to meet assigned deadlines. Provides daily feedback to Project Manager, • Able to build and wire custom panels from engineering drawings, • Advanced Fiber optic cable handling, installation termination and testing, • Provide training and assistance to on-site install techs, • Responsible for tracking and maintaining toolkits, job material boxes, company vehicles and materials inventories. Keep clean, orderly and well documented, • Responsible for tracking and maintaining their personal licenses, certifications and qualifications. (Some states have specific requirement in this area), • Maintain daily record of time worked on specific projects for timesheet entry. Maintain an activity log and a personnel log for skills to report on recommended improvements. Complexity: This level of technician will be responsible for performing tasks on clients' jobsites with no supervision. This position is responsible for the coordination with clients, contractors and subcontractors. This position will be the key and only field superintendent in many situations and will be responsible for delegating work, monitoring others work and communicating with key stakeholders on behalf of the PM. Requires maintaining quality control on all field work. This position requires the highest level of technical and people skills along with great communication skills. Decision Making Authority: This position is often alone on the job sites and requires making good judgement about decisions that need to be made. In general, the project manager and a site supervisor are available to answer questions, but this position is very independent and will be looked upon to make many onsite decisions on behalf of the PM. This position requires good diplomacy inworking with our clients and other key stakeholders on the job sites. Physical Demands: The physical demands described here are representative of those that may be met by an employee. The employee may be exposed to construction site conditions on a regular basis. Employee will be responsible for their safety while on job sites and to comply with all safety regulations in place by the GC. Use of PPE is usually required on job sites. The employee can typically spend at least 60% of their time on their feet and be required to be mobile around the construction site. The employee must have the ability to occasionally climb ladders, use stairs and lift and/or move materials up to 40 pounds in construction areas. The individual is regularly required to use keyboards, test equipment and controls required for SI installation projects. Specific vision abilities required for this job include close vision, distance vision, peripheral vision and depth vision. When not on construction sites, the employee will experience normal office conditions and be required to use office equipment such as computers, peripherals, etc. Travel: Frequent travel by car and occasional airplane trips are required. Employee must possess a valid driver's license in their state of residence. Employee will be required to use their own vehicle and will be reimbursed for mileage at the current corporate rate. Local travel to job sites (within a 2-hour driving distance each way) will make up 70-90% usually but remote travel can be up to 30% of the job at times. 10% remote travel is required on a regular basis. Occasional travel by airplane for out-of-town projects is required. Safety: • Maintain and wear appropriate PPE as the job and tasks require it., • Ensure hazards are addressed and rectified in a timely manner. What You'll Bring: Education/Certifications: • High school or equivalent experience, • AVIXA CTS Certification is preferred, • AVIXA CTS-I Certification is highly encouraged, • OSHA 30 & SST Certificate required., • NYC OSHA30 preferred, • 5+ years as an installation technician or related industry experience, • Must have a valid driver's license and adhere to our insurance requirements, • Familiarity with a wide range of audio, video and networking equipment, • Knowledgeable of low voltage electrical concepts, • Possess advanced AV installation skills, • Good verbal communication skills and good customer service skills, • Ability to diagnose, troubleshoot and resolve technical problems, • Core Hours: Monday-Friday with flexibility for early mornings, evenings, and weekends if needed What We Offer: Along with competitive compensation, you will be eligible for the following benefits: • Multiple medical plan options to suit your family's needs, • Dental (including orthodontic coverage) and vision plans, • Company paid Basic Life, AD&D, Short-Term and Long-Term Disability Insurance, and Employee Assistance Plan (EAP), • Healthcare and Dependent Care Flexible Spending Accounts (FSA), • 401k with Employer Match, • Paid Time Off and Paid Holidays, • Voluntary Benefits: Critical Illness, Hospital Indemnity, Accident Insurance, Pet Insurance, Homeowners and Auto Insurance, Supplemental Term and Dependent Life and AD&D, and Legal Services, • Commuter Benefits Diversified is an equal opportunity employer committed to fostering an inclusive and diverse workplace. All aspects of employment will be based on job requirements, individual qualifications, merit, performance, and business need. We do not discriminate based on race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, or any other protected characteristic under applicable law. We believe in fair and equitable hiring practices and strive to create an environment where all individuals feel valued and empowered. If you require a reasonable accommodation to participate in the application or interview process due to a disability, please contact so we can assist you. Our compensation ranges reflect the cost of labor across several US geographic markets. The pay details below range from our lowest geographic market up to our highest geographic market. Pay is based on several factors including market location and may vary depending on job-related knowledge, skills and experience depending on the position offered, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits.

About Diversified: Diversified is a global leader in audio visual and media innovation, recognized for designing and building the world's most experiential environments. Our award-winning team specializes in delivering solutions for the most complex, large-scale and immersive installations. Serving a global clientele that includes major media organizations and retailers, sports and live performance venues, corporate enterprises, and government agencies, Diversified partners with clients to create spaces that bring people together and keep them coming back. What to Expect: At Diversified, we're on a mission to create a world without boundaries, where technology enables all people to connect and experience the moments that matter, wherever they choose to be. With clients spanning the globe and an exciting pipeline of projects across industries, Diversified offers more than just a job. We offer a career path with the flexibility to grow personally and professionally, wherever your ambitions take you. As a Diversified associate, you'll dive headfirst into big, complex, and rewarding projects that push the boundaries of what's possible. Plus, you'll enjoy a flexible work environment, competitive compensation and benefits, and a culture that celebrates diversity and inclusion. IF YOU CAN DREAM IT, YOU CAN DO IT AT DIVERSIFIED. How You'll Contribute: Senior Project manager (SPM) is responsible for the scope, schedule, cost, quality and client satisfaction of a project throughout its entire lifecycle, from Initiating through Closing phases. However, the SPM depends on the help of other people to perform most of the actual activities of the project. A senior project manager's role is primarily focused around written and verbal communication to all project stakeholders. The SPM is responsible for overseeing, and performing project management functions on all M&E projects, budgets and scopes. The PM will act as the person responsible on their assigned projects and have direct control over all project activities. ___What You'll Do: Primary Duties and Responsibilities: • Daily activities include project communications, scheduling, task lists for technicians, managing deliverables from engineering, CAD and Programming and overseeing the completion of projects. The PM isresponsible for completing systems integration projects on time, on budget and achieving high customer satisfaction from our customers. The majority of this employee's time will be spent managing projects and communicating with all project stakeholders. This person will be helping to constantly improve the established Diversified processes., • As the primary interface to the client, the project manager develops a strong long-term relationship. He manages the client relationship, including expectations, communications and satisfaction., • Coordinates and communicates., • Provides clear leadership and ownership for the project within Diversified, including accurate and timely verbal and written communication and follow up., • Coordinates all activities associated with the timely, accurate and on-budget completion of the project, including engaging stakeholders, delegating responsibilities clearly and running client and internal project meetings., • Provides support and assistance to team members as needed in order help them be successful and get the job done., • Ensures appropriate and frequent communication between stakeholders. Resolves destructive conflict., • Designs, plans, and coordinates work teams with regard to M&E installation projects., • Assumes ownership of individual projects and assignments., • Establishes and maintains communication with Account Executives, Directors, installation technicians, subcontractors, clients, etc., • Develops and communicates project updates as required., • Provides constant monitoring of labor, equipment and materials budgets., • Provides and/or directs technical and administrative support to project team members., • Develops and maintains all related project schedules., • Performs field verification of prospective work site. Documents all issues with site and keeps everyone informed of potential issues and solutions., • Coordinates all drawings and documentation between all internal and external stakeholders., • Facilitates and directs design reviews to assure proper documentation in the field., • Coordinates all system programming and final checkout of systems. Provides punch-list of remaining tasks after substantial completion., • Contracts with contractors and other trades when necessary., • Monitors status of projects including cost, timing and staffing to ensure timely and accurate completion of projects., • Ensures quality and continuous improvement., • Takes full ownership of project., • Acts as thesingle point of responsibility and accountability for the project., • Ensures schedule performance, quality of solution delivered to client, and client satisfaction., • Manages and reports on the project's financials, including ensuring budget performance and profitability.Ensures timely and correct billings to client., • Demonstrates proactivity, responsiveness, and follow through., • Communicates decision options to stakeholders and manages those decisions., • Manages a complex array of decisions at every point of the project but is rarely the sole decision maker. Physical Working Environment: Physical Demands: • The physical demands described here are representative of those that may be met by an employee., • The employee may be exposed to construction site conditions on a regular basis. Employee will be responsible for their safety while on job sites and to comply with all safety regulations in place by the GC. Use of PPE is usually required on job sites., • The employee can typically spend at least 40% of their time on their feet and be required to mobile around the construction site., • The employee must have the ability to occasionally climb ladders, use stairs and lift and/or move materials up to 20 pounds in construction areas., • The individual is regularly required to use keyboards, test equipment and controls required for SI installation projects. Specific vision abilities required for this job include close vision, distance vision, peripheral vision and depth vision. Frequent travel by car and occasional airplane trips are required. Employee must possess a valid driver's license in their state of residence. Employee will be required to use their own vehicle and will be reimbursed for mileage at the current corporate rate. Local travel to job sites (within a 2 hour driving distance each way) will make up 70-90% usually but remote travel can be up to 30% of the job at times. 10% remote travel is required on a regular basis. What You'll Bring: Education/Certifications: • A PMP certification from the Project Management Institute is desired., • Other relevant certifications may be required or preferred based on the technology focus of the position. Required Skills/Qualifications: • A minimum of 5+ years of experience as a project manager in broadcast / audio visual system installations., • Knowledgeable of low voltage electrical projects., • Strong verbal and written communication skills., • Supervisory and people skills., • The Project Manager shall have the ability and skills to diagnose and resolve complex technical, political, and people related problems., • A project manager typically has these base skills., • Has a high level of both written and verbal communication skills., • Focused on clients and able to understand how they can use technologyfrom Diversified to meet their business needs., • Approachable; works well on teams. Is a natural leader., • Delegates effectively., • Good at setting and managing people's expectations., • Personally organized, manages time well, and sets clear priorities., • Sets an example for preparation, punctuality, and professional appearance., • Excellent at planning., • Forecasts and manages risks., • Problem solver who can remain effective in tense situations. What We Offer: Along with competitive compensation, you will be eligible for the following benefits: • Multiple medical plan options to suit your family's needs, • Dental (including orthodontic coverage) and vision plans, • Company paid Basic Life, AD&D, Short-Term and Long-Term Disability Insurance, and Employee Assistance Plan (EAP), • Healthcare and Dependent Care Flexible Spending Accounts (FSA), • 401k with Employer Match, • Paid Time Off and Paid Holidays, • Voluntary Benefits: Critical Illness, Hospital Indemnity, Accident Insurance, Pet Insurance, Homeowners and Auto Insurance, Supplemental Term and Dependent Life and AD&D, and Legal Services, • Commuter Benefits Diversified is an equal opportunity employer committed to fostering an inclusive and diverse workplace. All aspects of employment will be based on job requirements, individual qualifications, merit, performance, and business need. We do not discriminate based on race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, or any other protected characteristic under applicable law. We believe in fair and equitable hiring practices and strive to create an environment where all individuals feel valued and empowered. If you require a reasonable accommodation to participate in the application or interview process due to a disability, please contact so we can assist you. Our compensation ranges reflect the cost of labor across several US geographic markets. The pay details below range from our lowest geographic market up to our highest geographic market. Pay is based on several factors including market location and may vary depending on job-related knowledge, skills and experience depending on the position offered, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits.

About Diversified: Diversified is a global leader in audio visual and media innovation, recognized for designing and building the world's most experiential environments. Our award-winning team specializes in delivering solutions for the most complex, large-scale and immersive installations. Serving a global clientele that includes major media organizations and retailers, sports and live performance venues, corporate enterprises, and government agencies, Diversified partners with clients to create spaces that bring people together and keep them coming back. What to Expect: At Diversified, we're on a mission to create a world without boundaries, where technology enables all people to connect and experience the moments that matter, wherever they choose to be. With clients spanning the globe and an exciting pipeline of projects across industries, Diversified offers more than just a job. We offer a career path with the flexibility to grow personally and professionally, wherever your ambitions take you. As a Diversified associate, you'll dive headfirst into big, complex, and rewarding projects that push the boundaries of what's possible. Plus, you'll enjoy a flexible work environment, competitive compensation and benefits, and a culture that celebrates diversity and inclusion. IF YOU CAN DREAM IT, YOU CAN DO IT AT DIVERSIFIED. How You'll Contribute: The Project Operations Field Implementation Manager, Canada is responsible for onsite guidance and oversight of multiple specific projects. Oversight of 10- 15+ Diversified Technicians subcontractors at any given time, is responsible for enforcing standards and processes that increase the quality, velocity, and efficiency for the team. This position is the onsite point for customer escalation and the face of Diversified during the implementation phase on key projects. This individual will work with PMO team and Engineering, ensuring Project Operations is aligned with the needs of our clients and the business unit needs. Location: Greater Toronto Area What You'll Do: Primary Duties and Responsibilities: • Act as Site Superintendent on high profile projects, acting as a single point of contact for onsite teams (Field Engineers, Technicians, Subcontractors, etc.); passing and filtering information to the Project Manager., • Assist in addressing performance of onsite resources and associates., • Training - Termination, mechanical, client interface and other aspects of Diversified installation standards., • First point of escalation for Field Issues with the client., • Empowered to defuse and resolve onsite client issues., • Verification and enforcement for onsite performance and productivity standards, providing feedback for reviews and training plans., • Provide onsite support for integration issues., • Assist in development and deployment for Installation processes and standards., • Recommends training for future growth and development of team to ensure best in class., • Provide a consistent level of technical performance as well as flexibility in work schedule. This position requires periodic overtime, weekends and may require overtime for extended periods to meet deadlines., • Able to complete assignments in accordance with or better than established task durations as well as estimate task durations to meet assigned deadlines. Provides daily feedback to Project Manager., • Assist in developing growth plans for both process and operations staff to help ensure long term success., • Helps develop and ensures compliance in Quality Assurance program., • Field implementation and tracking of departmental goals and objectives., • Responsible for site activities related to Safety, Quality Control and QA., • Coordinates activities for service to ensure all systems requiring support are successfully included., • Final verification of preparedness for site activities., • Support fleet and/or delivery of tools and materials for field., • Maintain and track tooling/ test gear., • Site Surveys for projects and sales support., • Verification for commissioning readiness., • Review daily field reports for content and format. Complexity: • Verification and Implementation of standards in how Diversified deploys., • Immediate point of escalation for job sites. Decision Making Authority: • Feedback on Hires/Fires/Reviews., • Removal of personnel from jobsites., • Standard training and enforcement for Contractors., • Timesheet/PTO/Expense Verification. Physical Working Environment: • Ability to visit multiple jobsites in assigned geography., • Must be able to lift 50 lbs. Travel: Frequent travel by car and occasional airplane trips are required. Employee must possess a valid Ontario driver's license. Employees will be required to use their own vehicle and will be reimbursed for mileage at the current corporate rate. Local travel to job sites (within a 2 hour driving distance each way) will make up 70-90% of the time. Occasional travel by airplane for out-of-town projects may be required What You'll Bring: Required Skills/Qualifications • 3+ years' experience as a senior or lead technician, or experience as a site superintendent with another company., • Familiarity with a wide range of audio, video and networking equipment., • High level of experience in construction environments, • Knowledgeable of low voltage electrical concepts., • Possess advanced AV installation skills., • Good verbal communication skills and good customer service skills., • Ability to diagnose, troubleshoot and resolve technical problems., • Preferred candidates hold CTS or CTSI certifications. What We Offer: Along with competitive compensation, you will be eligible for the following benefits: • Medical and dental plan options to suit your family's needs, • Basic Life, AD&D, Short-Term and Long-Term Disability Insurance, • Healthcare and Dependent Care Flexible Spending Accounts (FSA), • Paid Time Off and Paid Holidays, • Commuter Benefits Diversified is an equal opportunity employer committed to fostering an inclusive and diverse workplace. All aspects of employment will be based on job requirements, individual qualifications, merit, performance, and business need. We do not discriminate based on race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, or any other protected characteristic under applicable law. We believe in fair and equitable hiring practices and strive to create an environment where all individuals feel valued and empowered. If you require a reasonable accommodation to participate in the application or interview process due to a disability, please contact so we can assist you. Our compensation ranges reflect the cost of labor across several geographic markets. The pay details below range from our lowest geographic market up to our highest geographic market. Pay is based on several factors including market location and may vary depending on job-related knowledge, skills and experience depending on the position offered, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits.

Job Description Job Description Job Title: Controls Technician/ Electrician Company Information Our company was established in 1984 as an HVAC service company. We have grown into one of the largest mechanical contractors in NJ servicing large commercial and industrial buildings consisting of chiller plants, built-up penthouses and large HVAC equipment. We believe all customer interactions should be executed with the highest level of professionalism, excellence and competency at all levels of the organization. Minimum Requirements Experienced controls technician with a minimum of 5 years experience with a strong background in installation, commissioning, troubleshooting, repairing and maintaining building automation control systems and devices. Applicant must be able to follow wiring diagrams and engineering specifications to install and troubleshoot. Responsibilities: • Low voltage wiring, installation, termination of building automation controllers and end-devices., • Testing, commissioning and calibration of sensors, valves, dampers, etc., • Troubleshooting and programming of VFD’s., • Programming of application specific controls such as VAV boxes and fan coils., • Installation of MSTP and IP networks., • Be part of the on-call rotation, • Tridium Jace, • Johnson FX, • BACnet IP, MSTP networks, • RTU, Chiller Plants, Boilers VAV boxes sequence of operations, • Valid drivers license, • HVAC building automation knowledge, • Must be able to perform the physical requirement of the job, • Basic computer skills of Excel, Word, and Outlook., • Five years experience with the installation and troubleshooting of building automations systems, • Communication skills (oral and writing), • Able to read wiring diagrams and engineers drawings, • Able to work in a fast-paced environment, • Able to multi-task and focus amid distractions, • Good listener and a team player, • Detail oriented, • Organized, flexible and follow directions, • Able to work overtime when needed

About Diversified: Diversified is a global leader in audio visual and media innovation, recognized for designing and building the world's most experiential environments. Our award-winning team specializes in delivering solutions for the most complex, large-scale and immersive installations. Serving a global clientele that includes major media organizations and retailers, sports and live performance venues, corporate enterprises, and government agencies, Diversified partners with clients to create spaces that bring people together and keep them coming back. What to Expect: At Diversified, we're on a mission to create a world without boundaries, where technology enables all people to connect and experience the moments that matter, wherever they choose to be. With clients spanning the globe and an exciting pipeline of projects across industries, Diversified offers more than just a job. We offer a career path with the flexibility to grow personally and professionally, wherever your ambitions take you. As a Diversified associate, you'll dive headfirst into big, complex, and rewarding projects that push the boundaries of what's possible. Plus, you'll enjoy a flexible work environment, competitive compensation and benefits, and a culture that celebrates diversity and inclusion. IF YOU CAN DREAM IT, YOU CAN DO IT AT DIVERSIFIED. How You'll Contribute: A Project Manager (PM) isresponsible for the scope, schedule, cost, quality, and client satisfaction of a project throughout its entire lifecycle, from Initiating through Closing phases for media and entertainment organizations, as well as corporate entities. However, the PM depends on the help of other people to perform most of the actual activities of the project. A project manager's role is primarily focused around written and verbal communication to all project stakeholders. The PM isresponsible for overseeing, and performing project management functions on all projects, budgets and scopes.The PM will act as the responsible person on their assigned projects and have direct control over all project activities. The Project Manager may also mentor other Project Managers with the company. The PM will generally be assigned to large, complex and sensitive projects. This position will be providing direction to a wide range of internal and external personnel. Location: The Greater Toronto area. What You'll Do: Daily activities include project communications, scheduling, task lists for technicians, managing deliverables from engineering, CAD and Programming and overseeing the completion of projects. The PM isresponsible for completing systems integration projects on time, on budget and achieving high customer satisfaction from our customers.The majority of this employee's time will be spent managing projects andcommunicating with all project stakeholders.This person will be held accountable for following and helping to improve the established Diversified processes. As the primary interface to the client, the project manager develops a strong long-term relationship. Managing the client relationship, including expectations, communications and satisfaction. Coordinates and communicates: • Provides clear leadership and ownership for the project within Diversified, including accurate and timely verbal and written communication and follow up., • Coordinates all activities associated with the timely, accurate and on-budget completion of the project, including engaging stakeholders, delegating responsibilities clearly and running client and internal project meetings., • Provides support and assistance to team members as needed in order help them be successful and get the job done., • Ensures appropriate and frequent communication between stakeholders., • Resolved destructive conflict., • Designs, plans, and coordinates work teams with regard to installation projects, • Assumes ownership of individual projects and assignments, • Establishes and maintains communication with Account Executives, Directors, engineers, installation technicians, subcontractors, clients, etc., • Develops and communicates project updates as required., • Provides constant monitoring of labor, equipment and materials budgets., • Provides and/or directs technical and administrative support to project team members. Develops and maintains all related project schedules., • Performs field verification of prospective work site. Documents all issues with site and keeps everyone informed of potential issues and solutions., • Coordinates all drawings and documentation between all internal and external stakeholders. Facilitates and directs design reviews to assure proper documentation in the field. Coordinates all system programming and final checkout of systems. Provides punch-list of remaining tasks after substantial completion., • Contracts with contractors and other trades when necessary., • Monitors status of projects including cost, timing and staffing to ensure timely and accurate completion of projects., • Ensures quality and continuous improvement. Every project is different, and project stakeholders are different. The SPM needs to negotiate a very complex set of variables between system design, site conditions and a widely varying set of expectations with multiple stakeholders.The skill of communicating both verbally and in writing to manage all these variables takes a very high level of awareness, emotional intelligence and people management skills.The SPM is constantly managing the forces of change in every project environment. Balancing schedules, budgets, scope, quality and client satisfaction are a very complex set of variables. Decision Making Authority: • Takes full ownership of project, • Acts as thesingle point of responsibility and accountability for the project., • Ensures schedule performance, quality of solution delivered to client, and client satisfaction., • Manages and reports on the project's financials, including ensuring budget performance and profitability.Ensures timely and correct billings to client., • Demonstrates proactivity, responsiveness, and follow through., • Communicates decision options to stakeholders and manages those decisions. The physical demands described here are representative of those that may be met by an employee.The employee may be exposed to construction site conditions on a regular basis.Employee will be responsible for their safety while on job sites and to comply with all safety regulations in place by the GC. Use of PPE is usually required on job sites.The employee can typically spend at least 40% of their time on their feet and be required to mobile around the construction site.The employee must have the ability to occasionally climb ladders, use stairs and lift and/or move materials up to 20 pounds in construction areas.The individual is regularly required to use keyboards, test equipment and controls required for SI installation projects.Specific vision abilities required for this job include close vision, distance vision, peripheral vision and depth vision.When not on construction sites, the employee will experience normal office conditions and be required to use office equipment such as computers, peripherals, etc. Travel: Travel by car and occasional airplane trips are required. Employee must possess a valid Ontario driver's license. Travel to job sites will make up 20-40% usually with the remaining time in an office or remote setting. Safety: • Maintain and wear appropriate PPE as the job and tasks require it., • Ensure hazards are addressed and rectified in a timely manner., • Participate in incident investigations and reporting., • Conduct safety walk-throughs on project sites. Education & Certifications: • Associates/Bachelor's degree PREFERRED or equivalent experience., • AVIXA CTS Certification required or completed within 1 year of starting the position., • A PMP certification from the Project Management Institute, preferred., • Other relevant certifications may be required or preferred based on the technology focus of the position. Required Skills/Qualifications: • A minimum of 2+ years of experience in systems integration is required, with 3+ years in project management., • Deep knowledge and experience with media and entertainment or broadcast systems., • A valid Ontario driver's license, • Knowledgeable of low voltage electrical projects., • Strong financial background in project cost accounting., • 5+ years of experience in systems integration, with 5+ years in project management., • Strong verbal and written communication skills., • Supervisory and people skills. Along with competitive compensation, you will be eligible for the following benefits: • Medical and dental plan options to suit your family's needs, • Basic Life, AD&D, Short-Term and Long-Term Disability Insurance, • Healthcare and Dependent Care Flexible Spending Accounts (FSA), • Paid Time Off and Paid Holidays, • Commuter Benefits Diversified is an equal opportunity employer committed to fostering an inclusive and diverse workplace. All aspects of employment will be based on job requirements, individual qualifications, merit, performance, and business need. We do not discriminate based on race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, or any other protected characteristic under applicable law. We believe in fair and equitable hiring practices and strive to create an environment where all individuals feel valued and empowered. If you require a reasonable accommodation to participate in the application or interview process due to a disability, please contact so we can assist you. Our compensation ranges reflect the cost of labor across several geographic markets. The pay details below range from our lowest geographic market up to our highest geographic market. Pay is based on several factors including market location and may vary depending on job-related knowledge, skills and experience depending on the position offered, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits.

CMTA, formerly known as AMA Group, is looking to fill out our 2026 Summer Internship program; this opportunity will be within our. This Summer internship will focus on IT infrastructure design work. Please note that there is no relocation or housing assistance available internally for this internshi

Job Description Duties include: Installation, troubleshooting, repair, and termination of Cat 5e, 6, coax, and fiber optic cables. Experience with video & security systems, including running video/audio cabling, DVR system setup & troubleshooting is a major plus. Experience with running phone lines, punch down blocks, & line/extension troubleshooting is a major plus. Experience with patch panel Installation Use of test equipment and appropriate hand tools as needed during installation or repair. Updating documentation, as appropriate, for customer and other technicians. Successful candidates will have: Must have valid Driver’s license. Must Have their own personal tools; small personal drill, crimper, punch down, P-touch Labeler, wire map tester , etc. excluding Certifiers and Power Tools. Proficiency with testing equipment. Working knowledge of current cabling standards and codes. Professional appearance and demeanor. Must be a team player as our techs often work together Strong communication skills. Physical ability to lift up to 60 pounds and work on ladders. Job Type: Full-time Experience: • Monday to Friday, • Weekends (sometimes), • Day shift, • Night shift, • Overtime

Pay Disclosure & Considerations** Where pay ranges are indicated, please note that a successful candidate's exact pay will be determined based relevant job-related factors, including any of the following: candidate's experience, skills, and qualifications, as well as geographic and market considera

Day to day, you'll… * Perform basic building maintenance such as replacing light bulbs, replacing ceiling tiles, cleaning HVAC vents, conducting minor low-voltage electrical work and repairing minor damages * Deliver supplies and materials to and from tax office locations in a timely and organi

Install and oversee HVAC systems including central AC, furnaces, heat pumps, and ductless mini-splits-ensuring every job meets our high standards for quality, safety, and code compliance. Strong technical knowledge of HVAC systems, airflow, and low-voltage wiring.

CMTA, formerly known as AMA Group, is looking to fill out our 2026 Summer Internship program; this opportunity will be within our Madison, New Jersey and New York City office.We are looking for Juniors in college who are interested in learning more about building systems design.This Summer internshi

Job Description Well established electrical contractor seeks experienced Assistant Project Managers with low voltage/utility experience. The Electrical Assistant Project Manager supports the Project Manager in planning, coordinating, and executing electrical construction projects. This role helps ensure projects are completed safely, on schedule, within budget, and in accordance with contract documents and quality standards. Key Responsibilities * Assist the Project Manager with day-to-day management of electrical construction projects * Help coordinate schedules, manpower, materials, and equipment * Review project drawings, specifications, and contract documents * Track project costs, budgets, and change orders * Prepare and maintain submittals, RFIs, and project documentation * Coordinate with field supervisors, electricians, engineers, and other trades * Assist with procurement of materials and subcontractor coordination * Attend project meetings and assist with meeting minutes and follow-ups * Support jobsite safety compliance and company safety policies * Assist with project closeout, including as-builts and O&M manuals Required Qualifications * Experience in electrical construction or project coordination * Basic understanding of electrical systems and construction processes * Ability to read and interpret electrical drawings and specifications * Proficiency with project management software (e.g., Procore, MS Project, Primavera, or similar) * Strong organizational and communication skills * Ability to manage multiple tasks in a fast-paced environment Preferred Qualifications * Journeyman electrician background or electrical field experience * Associate's or Bachelor's degree in Construction Management, Engineering, or related field * Experience with commercial or industrial electrical projects * Familiarity with estimating, scheduling, and cost tracking Work Environment * Combination of office and jobsite work * Regular interaction with field crews, clients, and subcontractors * Schedule may vary based on project needs

Job Description Outside Sales Representative (Security) About the Company Confires Fire Protection Service, LLC is a leader in the industry for providing fire protection services throughout New Jersey, Delaware and Philadelphia. Confires is based in South Plainfield, NJ, with an additional office location in Elizabeth, NJ, and has an excellent team that are responsible for delivering exceptional service to our customers for their fire and security system inspections, repairs, and installation. We perform mandated inspections and repairs to fire alarm systems, burglar alarm systems, access control systems, as well as CCTV & video surveillance systems. The company is continually growing through its internal sales and marketing activities, strong reputation and business acquisitions. Visit our website to learn more about us, About the Opportunity Confires Fire Protection Service, LLC is currently seeking an experienced Outside Sales Representative to identify, develop, and close new business opportunities in the commercial security and low-voltage market. The ideal candidate has experience in B2B sales, a strong understanding of security systems and low-voltage infrastructure, and a proven track record of exceeding sales targets. Job Duties • Identify and prospect new business opportunities within commercial markets., • Develop and maintain relationships with business owners, property managers, contractors, and decision-makers., • Conduct on-site consultations to assess security and low voltage needs, offering customized solutions., • Sell a range of security and low-voltage solutions, including:, • Access Control Systems (card readers, biometric access, key fob systems, cloud-based access control), • CCTV & Video Surveillance (IP cameras, video management software, remote monitoring solutions, AI-based analytics), • Burglar & Intrusion Alarm Systems (motion detectors, glass break sensors, perimeter security, alarm monitoring services), • Fire Alarm Systems (fire detection, notification devices, monitoring, NFPA compliance solutions), • Prepare and present proposals, quotes, and contracts to potential clients., • Work closely with the project and technical teams to ensure seamless implementation of solutions., • Achieve and exceed monthly and annual sales targets., • 2+ years of experience in B2B sales, preferably in commercial security, low-voltage, or technology solutions., • Strong knowledge of security systems, access control, CCTV, and alarm systems., • Excellent communication, negotiation, and presentation skills., • Self-motivated and results-driven with strong problem-solving abilities., • Ability to work independently and collaboratively within a team environment., • Proficiency in CRM software (Salesforce, HubSpot, or similar) and Microsoft Office Suite., • Competitive base salary (negotiable depending on candidate experience), • Monthly commissions, • 401K with a company match, • Medical, Dental and Vision Insurance, • Company paid Short Term Disability, • Company paid Long Term Disability, • Company paid Life and AD&D insurance, • Pre-tax accounts for health and dependent care, • Aflac, • Vacation and Personal time, • Paid holidays This link leads to the machine-readable files that are made available in response to the federal Transparency in Coverage Rule and includes negotiated service rates and out-of-network allowed amounts between health plans and healthcare providers. The machine readable files are formatted to allow researchers, regulators, and application developers to more easily access and analyze data. #OutsideSales #ElizabethNJ #Hiring #Security #NJJobs #Sales #Confires #NowHiring

Job Description Electrical Project Manager Location: New Jersey Compensation: $95,000 – $120,000 (based on experience) Employment Type: Full-time About Our Client Our client is a well-established electrical contracting firm with over 30 years in business, proudly serving the New Jersey region. Known for their honest, dependable service, they provide complete electrical contracting solutions, including installation and maintenance of electrical, communication, fire alarm, and security systems. With a reputation for tackling projects of all sizes and complexities, they have built strong industry partnerships and resources that ensure project success—whether it’s new construction, modernization, restoration, or ongoing maintenance contracts. Position Overview We are seeking a highly motivated and detail-oriented Electrical Project Manager with proven experience managing large-scale commercial projects involving both low voltage and high voltage systems. The ideal candidate will have the leadership skills to oversee multiple projects, coordinate effectively with clients and subcontractors, and ensure all work is delivered safely, on time, and within budget. Key Responsibilities • Manage all phases of large-scale commercial electrical projects from planning to closeout., • Oversee project schedules, budgets, manpower, materials, and equipment., • Coordinate with engineers, subcontractors, vendors, and clients to ensure smooth project execution., • Review and interpret electrical drawings, specifications, and contracts., • Lead project meetings and provide clear communication regarding progress, issues, and solutions., • Ensure compliance with safety standards, electrical codes, and company policies., • Monitor change orders, RFIs, and submittals throughout the project lifecycle., • Deliver high-quality service and maintain strong client relationships. Qualifications • 5+ years of experience as a Project Manager in commercial electrical contracting., • Strong background in both low voltage and high voltage systems., • Proven ability to manage large-scale commercial projects (new construction, modernization, or restoration)., • Excellent communication, leadership, and organizational skills., • Strong knowledge of project management software and electrical systems., • Ability to work independently and as part of a team in a fast-paced environment., • Valid driver’s license and reliable transportation required. Compensation & Benefits • Competitive salary: $95,000 – $120,000, commensurate with experience., • Comprehensive benefits package (medical, retirement, PTO)., • Opportunities for long-term career growth with a trusted and established firm. EQUAL EMPLOYMENT OPPORTUNITIES NorthPoint Staffing, LLC provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all employment terms and conditions, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. CONFIDENTIALITY The content of this message is confidential. If you have received it by mistake, please inform us by email by replying to this message and then delete the message. It is forbidden to copy, forward, or reveal the contents of this message to anyone. The integrity and security of this email cannot be guaranteed over the Internet.

Job Description Well established NJ electrical contractor seeks Electrical Estimator for their growing business. low voltage/utility experience preferred. Full time in office role. The Electrical Estimator is responsible for preparing accurate cost estimates for electrical construction projects. This role analyzes drawings, specifications, and project requirements to determine labor, material, equipment, and subcontractor costs, supporting competitive and profitable bids. Key Responsibilities * Review electrical drawings, specifications, and scope of work * Perform quantity takeoffs for electrical systems (power, lighting, low voltage, fire alarm, etc.) * Prepare detailed cost estimates for labor, materials, equipment, and subcontractors * Solicit and evaluate vendor and subcontractor quotes * Identify risks, value-engineering opportunities, and cost-saving alternatives * Collaborate with project managers, engineers, and field supervisors * Maintain historical cost data and pricing databases * Assist with bid preparation, proposal reviews, and bid submissions * Support project handoff from estimating to operations * Track changes, addenda, and scope revisions during the bidding process Required Qualifications * Experience as an Electrical Estimator or similar role in construction * Strong understanding of electrical systems and construction methods * Ability to read and interpret blueprints, schematics, and specifications * Proficiency with estimating software (e.g., Accubid, Trimble, PlanSwift, Bluebeam) * Strong math, analytical, and attention-to-detail skills * Knowledge of electrical codes and industry standards * Excellent communication and time-management skills Preferred Qualifications * Journeyman or Master Electrician background * Associate's or Bachelor's degree in Construction Management, Electrical Engineering, or related field * Experience estimating commercial and/or industrial projects * Familiarity with project scheduling and budgeting

Job DescriptionSeeking a highly motivated and results-driven Manufacturing Engineer to support production operations by developing, optimizing, and improving manufacturing processes for panelboards, low-voltage switchgear, and electrical panel assemblies. This role works closely with Engineering, Production, Quality, and Supply Chain teams to improve efficiency, reduce costs, and maintain the highest standards of product quality. The Manufacturing Engineer will play a key role in supporting new product introductions, improving manufacturing workflows, and implementing continuous improvement initiatives. • Union, NJ, • Salary $80k - $105k/ year, • Monday – Friday, • Competitive Salary (Paid Weekly), • Develop and improve manufacturing processes for the assembly of panelboards, switchgear, bus systems, wiring harnesses, and control panels., • Create and maintain work instructions, assembly procedures, process flows, and manufacturing documentation., • Support Design for Manufacturability (DFM) and collaboration with Engineering during New Product Introductions (NPI)., • Analyze production workflows to identify bottlenecks and implement process improvements., • Develop and maintain manufacturing routings, labor standards, and production fixtures., • Implement Lean Manufacturing practices, including 5S, Kaizen events, standardized work, and waste reduction., • Evaluate and specify tools, equipment, jigs, and fixtures to improve assembly efficiency., • Support quality initiatives including root-cause analysis (RCA), corrective actions (CAPA), and continuous improvement programs., • Train production personnel on updated manufacturing processes, equipment, and best practices., • Collaborate with suppliers to improve material quality and manufacturability., • Bachelor’s degree in Electrical Engineering, Mechanical Engineering, Industrial Engineering, or related field., • 3+ years of experience in manufacturing engineering, preferably in electrical equipment, switchgear, panelboards, or industrial equipment assembly., • Strong understanding of electrical components including breakers, contactors, relays, transformers, bus bars, metering devices, and control wiring., • Ability to read and interpret electrical schematics, one-line diagrams, wiring diagrams, and mechanical drawings., • Proficiency with CAD tools such as AutoCAD, SolidWorks, or similar platforms., • Hands-on experience with Lean Manufacturing and continuous improvement initiatives., • Experience with UL508A, UL67, UL891, and NEC standards., • Knowledge of ERP/MRP systems for managing BOMs and manufacturing routings., • Experience working in a high-mix, low-volume manufacturing environment., • Familiarity with CNC fabrication, punch/laser processes, or electrical enclosure manufacturing. If you’re interested in learning more about this role, please submit your resume for immediate consideration! Text "ME" to 813-579-1392 for faster response! Powered by JazzHR py4HnStfhF

Job Description About the Company Confires Fire Protection Service, LLC is a leader in the industry for providing fire protection and security services throughout New Jersey, Delaware and Philadelphia. Confires is based in South Plainfield, NJ, with an additional office location in Elizabeth, NJ, and has an excellent team that are responsible for delivering exceptional service to our customers for their fire and security system inspections, repairs, and installation. We perform mandated inspections and repairs to fire alarm systems, burglar alarm systems, access control systems, as well as CCTV & video surveillance systems and Locking and Door hardware. The company is continually growing through its internal sales and marketing activities, strong reputation and business acquisitions. Visit our website to learn more about us, . About the Opportunity Confires Fire Protection Service, LLC, is currently seeking an experienced Sales Engineer to identify, develop, and close new business opportunities in the commercial security/low-voltage market. The ideal candidate has experience in B2B sales, a strong understanding of security systems, CCTV and low-voltage infrastructure, and a proven track record of exceeding sales targets. They will also work closely with the operations team assisting the project design and execution to ensure that the projects are successful from Bid to Completion. Job Duties • Identify and prospect new business opportunities within commercial markets., • Develop and maintain relationships with business owners, property managers, contractors, and decision-makers., • Conduct on-site consultations to assess security and low voltage needs, offering customized solutions., • Sell a range of security and low-voltage solutions, including:, • Access Control Systems (card readers, biometric access, key fob systems, cloud-based access control), • CCTV & Video Surveillance (IP cameras, video management software, remote monitoring solutions, AI-based analytics), • Burglar & Intrusion Alarm Systems (motion detectors, glass break sensors, perimeter security, alarm monitoring services), • Prepare and present proposals, quotes, and contracts to potential clients., • Work closely with the project and technical teams to ensure seamless implementation of solutions., • Achieve and exceed monthly and annual sales targets., • 5+ years of experience in B2B sales in commercial security, low-voltage, or technology solutions., • Strong knowledge Security systems, access control, CCTV, and alarm systems., • Excellent communication, negotiation, and presentation skills., • Self-motivated and results-driven with strong problem-solving abilities., • Ability to work independently and collaboratively within a team environment., • Proficiency in CRM software (Salesforce, HubSpot, or similar) and Microsoft Office Suite., • Competitive base salary (negotiable depending on candidate experience), • Monthly commissions, • 401K with a company match, • Medical, Dental and Vision Insurance, • Company paid Short Term Disability, • Company paid Long Term Disability, • Company paid Life and AD&D insurance, • Pre-tax accounts for health and dependent care, • Aflac, • Vacation and Personal time, • Paid holidays This link leads to the machine-readable files that are made available in response to the federal Transparency in Coverage Rule and includes negotiated service rates and out-of-network allowed amounts between health plans and healthcare providers. The machine readable files are formatted to allow researchers, regulators, and application developers to more easily access and analyze data.