Trabajos low voltage en Clifton, New JerseyCrear alertas

Achieving our goals starts with supporting yours. Grow your career, access top-tier health and wellness benefits, build lasting connections with your team and our customers, and travel the world using our extensive route network. Come join us to create what’s next. Let’s define tomorrow, together. At United, we have some of the best aircraft in the world. Our Technical Operations team is full of aircraft maintenance technicians, engineers, planners, ground equipment and facilities professionals, and supply chain teams that help make sure they’re well taken care of and ready to get our customers to their desired destinations. If you’re ready to work on our planes, join our Tech Ops experts and help keep our fleet in tip-top shape. The sign-on bonus is exclusively for external candidates, internal applicants are not eligible to receive the sign-on incentive. • Requires a thorough knowledge of general building maintenance with emphasis on electrical solving, including AC & DC circuits, high voltage (480), high amperage and some 400 cycle equipment, • Requires experience in industrial wiring and the ability to read and follow wiring schematics and work without supervision, • Journeyman electrical license a plus, • Requires the ability to make low and high voltage repairs to all building electrical equipment, • This includes solving, installation and repair of 110/220/480 volt single and multiphase electrical circuitry and devices, • You should also have some experience in related building equipment and trades, such as air handling units, plumbing and steam fitting, fire systems and conveyors, • Facilities Technicians must be able to work around the clock shifts, including weekends and holidays, in the outdoors in all weather conditions, • Schedules are bid and awarded according to seniority, • Facilities Technicians are represented by the International Brotherhood of Teamsters (IBT), • Salary increases will be administered according to the current IBT/United contract, • New employees are required to join the union within ninety (90) days of employment, • There is an initiation fee for joining the union and subsequent monthly union dues which are set by the Local Lodge, • HVAC (including building management systems), • Mechanical (including conveyors), • Plumbing, • PLC electronic/computer controls, • Must have completed high school diploma, GED or equivalent, • Ability to maintain and repair all building disciplines, heavy mechanical and welding, • Work may be indoors or outside or in elevated areas anywhere on airport, • Must be able to climb and work from ladders, and/or walk for extended periods, • Moderate lifting, • Must possess sufficient tooling to perform required tasks, • Computer experience for input and retrieval of data, • Qualified candidates must be immediately available for full time employment, • Must possess a valid, clean, applicable state driver's license, • Electronics diagnostics and troubleshooting The starting rate for this role is $34.52. This is also a bonus eligible position (i.e. profit sharing). We offer competitive benefits: medical, dental, vision, life, accident & disability, employee assistance program, commuter, paid holidays, paid time off, 401(k), pension and flight privileges (subject to the respective collective bargaining agreement). United Airlines is an equal opportunity employer. United Airlines recruits, employs, trains, compensates and promotes regardless of race, religion, color, national origin, gender identity, sexual orientation, physical ability, age, veteran status and other protected status as required by applicable law. Equal Opportunity Employer - Minorities/Women/Veterans/Disabled/LGBT. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions. Please contact ___ to request accommodation.

Sysco is Now Hiring Diesel Fleet Techs Lvl. III in Northampton, PA! \nEarn $28.17 - $42.21 per Hour* Plus a $600 Annual Tool Allowance \nComprehensive Benefits Package \n\n We offer our colleagues the opportunity to grow personally and professionally, to contribute to the success of a dynamic organization, and serve others in a manner that exceeds their expectations. We’re looking for talented, hard-working individuals to join our team. Come grow with us and let us show you why Sysco is at the heart of food and service. \n\n Benefits: \n\n\n\t • Earn $28.17 - $42.21 per hour*\n\t, • $600 annual tool allowance\n\t, • Annual boot allowance\n\t, • Paid vacation and holidays\n\t, • Ongoing job skills and leadership development training\n\t, • Career growth opportunities – we promote from within!\n\t, • Comprehensive healthcare benefits\n\t, • Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet\n\t, • Perform FAI/CVI (annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies (includes all state-required inspections and frequencies)\n\t, • Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, refrigeration units (reefer), lift-gates, light-duty vehicles, and any other company-owned equipment\n\t, • Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment\n\t, • Perform preventive maintenance, diagnosis and repair to refrigeration units (reefer)\n\t, • Address all Driver Vehicle Inspection Report write ups timely, and efficiently\n\t, • Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems\n\t, • Follow procedures including documenting all work performed on work orders\n\t, • Mentor, teach and share expertise with Fleet Technician I and II to aid in their development to positions of greater responsibility\n\t, • May perform moderate supervisory roles when Fleet Manager or Fleet Supervisors are not accessible\n\t, • Proficient in electrical meter testing\n\t, • Knowledge of controls and electrical systems (DC, low-voltage)\n\t, • Electric motor knowledge (DC)\n\t, • Education\n\t\n\t\t, • High school diploma or GED\n\t\t, • Current and valid driver's license (CDL preferred, not required)\n\t\n\t\n\t, • Experience\n\t\n\t\t, • Medium / Heavy Duty truck technical training\n\t\t, • 2-year school and 4 years of experience OR 5 years of experience in fleet maintenance and repair\n\t\n\t\n\t, • Certifications, Licenses, and Registrations\n\t\n\t\t, • Annual Inspector Certification knowledge, skills, and abilities\n\t\t, • Brake Inspector Certification knowledge, skills, and abilities\n\t\t, • ASE certifications; automotive or medium/heavy duty trucks\n\t\t

Job Summary We are looking for an experienced Low Voltage Project Manager to join our dynamic team in New Jersey. Responsibilities: • Lead project execution with subcontractors to plan, coordinate, and install low-voltage systems., • Prepare complete project estimates through detailed review of drawings, specifications, and site, • conditions., • Supervise purchasing, logistics, and delivery of all project materials., • Monitor construction progress to ensure projects are completed on schedule, within scope, and, • within budget., • Manage financial aspects of contracts, including progress billing, rental equipment, cost tracking,, • and profitability., • Maintain strong client relationships while protecting company interests., • Coordinate inspections, testing, commissioning, and project close-out documentation., • Install, maintain, and troubleshoot CCTV systems, including cameras, NVRs/DVRs, and network, • connectivity., • Install, configure, and maintain access control systems, including card readers, door controllers,, • locking hardware, and software platforms., • Perform structured cabling installations for voice, data, fiber, and video systems, including cable, • pathways, tray installation, labeling, and termination., • Install and support DAS (Distributed Antenna Systems) and cellular signal infrastructure., • Configure and install network equipment, including switches, routers, access points, and PoE, • systems., • Diagnose system issues, perform repairs, and ensure compliance with industry standards and, • safety regulations., • Communicate effectively with internal teams, subcontractors, and clients regarding project status,, • Minimum 3 years of experience in low voltage installations or a related field (Technician)., • Minimum 5 years of experience in low voltage Project Manager (Project Manager)., • Strong proficiency in cable terminations, structured cabling, and network infrastructure., • Excellent problem-solving skills and a high attention to detail., • Valid driver’s license and ability to travel to job sites as required.

Job Description At 4over, we are committed to building a diverse and inclusive workplace welcoming to people of all backgrounds. Providing our employees with job training and opportunities for growth, development, and advancement. We take pride in fostering a safe environment for all employees in our climate-controlled plants. Summary: The Maintenance Technician is responsible for troubleshooting, repairing and maintaining the plant production machinery, service equipment and physical building systems. Including but not limited to electrical, mechanical and plumbing systems. Schedule: 1st shift, Monday - Friday, eight or more hours per day, five days per week based on business needs. Primary schedule will be 8:00 AM – 4:00 PM, or similar. Training may occur at other times. Salary Range: $29.00 To $35.00 Hourly Compensation commensurate with experience. At time, we are not engaging with agencies or third-party recruiters. Thank you for understanding. DUTIES AND RESPONSIBILITIES To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The listed requirements are representative of knowledge, skillset, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Include the following: • Assist plant management in maintaining a proactive preventative maintenance program, • Safely troubleshoot mechanical/electrical problems, • Maintain hardware and software by responding to emergency service requests including diagnosing problems, ordering parts as needed, completing repairs or recommending solutions, • Participate in installation and removal of equipment, • Conduct routine checks and service equipment as required, • Provide production with clear proactive information on service issues, • Ensure completion of assignments by meeting quality/quantity specifications and requirements, • Complete and process all required paperwork, records, documents, etc., • Regularly perform general housekeeping duties in your work area(s), • Adhere to all safety policies and protocols and maintain a safe working environment, • Assist in cultivating an interdependent safety culture by reporting workplace hazards, related injuries, illnesses and or/near misses to management immediately, • Attend all department/company meetings, • Wear all assigned Personal Protective Equipment (PPE) when required. EDUCATION, LICENSES, CERTIFICATIONS, EXPERIENCES: • Minimum of one (1) to three (3) years related field experience diagnosing and troubleshooting basic electrical problems using diagrams or blueprints, • Minimum of one (1) to three (3) years related field experience maintaining electrical, mechanical and plumbing systems, • Demonstrated ability to troubleshoot electrical and mechanical problems to the component level, • Working knowledge of materials and chemicals used in the printing industry, • Basic math skills, ability to perform mathematical functions of addition, subtraction, multiplication and division, • Knowledge of high and low voltage wiring, capability of identifying and qualifying single phase as well as three phase power requirements, • Ability to operate gas and electrical forklifts, • Effectively communicate orally and written with all members of the internal organization as well as external customers, • Ability to work flexible, extended hours and weekends as required for business needs, • Reading comprehension in relation to job, • Detail-oriented and organized work ethics include efficient time management skills, with proven track record of completion of tasks/assignments 4over was founded in February of 2001. What started off as creating business cards and web page designs by a husband and wife, quickly flourished. Since the company was founded, we are now a private equity owned company growing and expanding across many states. Through our 4over Core Attributes, we are committed to meeting and exceeding customer expectations, cultivating and nurturing our relationships, providing excellence and caring for others. Health and Life Insurance- • Medical, Dental, Vision, Life/AD&D Insurance, Disability, and Flexible Spending Accounts (FSAs) for Health Care and Dependent Care, • 4over pays 100% of the employee’s premium for his/her Basic Life/AD&D Insurance in the amount of 1x the employee's annual salary, up to $500,000, • New employees are eligible to enroll the first of the month, following 1 month of employment, • Semi-annual open enrollment (January 1st and July 1st), • Discretionary employer match; typically, 50% of employee deferrals up to 6% of compensation, • 9 Paid Holidays

Job Description Essential HVAC Installer Duties & Responsibilities The primary function is the installation of new or replacement HVAC systems (furnaces, air conditioners, heat pumps, air handlers, etc.) in residential or commercial settings. * System Installation: Installing heating, cooling, and ventilation equipment according to manufacturer specifications and company requirements. * Ductwork: Fabricating and installing sheet metal and flex duct systems, vents, and air distribution components. * Piping & Wiring: Installing copper refrigerant lines (including brazing and soldering), properly connecting gas lines, and wiring both low and high voltage to the equipment. * Blueprint Reading: Interpreting blueprints, schematics, and technical diagrams to plan system layouts and complete installations correctly. * Performance Testing: Performing system start-ups and testing performance, checking refrigerant levels, airflow, and calibrating thermostats. * Compliance: Ensuring all installations comply with local, state, and federal codes, including proper safety procedures and refrigerant handling regulations. * Customer Interaction: Explaining the system operation and maintenance to the customer and ensuring a high level of satisfaction. * Logistics: Pre-measuring jobs to determine material needs, verifying, loading, and stocking company vehicles with equipment and parts. ✨ Key Skills and Qualifications Required Skills & Qualifications Technical: • Proficiency with hand and power tools, • Strong mechanical aptitude and problem-solving skills, • Physical ability to lift heavy equipment (up to 50-100 lbs), • Comfort working in confined spaces (attics, crawl spaces) and on roofs/ladders, • Valid NJ driver's license, • Must have 4 years of experience, • Excellent customer service and communication skills, • High level of attention to detail and commitment to safety, • Ability to work independently and as part of a team We value our team and are committed to supporting your long-term financial well-being. Following one year of continuous employment with our company, you will become eligible for enhanced benefits.

Job Description Digistallers Inc. is an open platform for Digital Signage, Audio Video Technicians, and Electrical Engineers, who are seeking contractor work. We are seeking a licensed and experienced Electrician Contractor to lead and manage electrical installations, repairs, and maintenance projects. The ideal candidate will have a strong background in residential, commercial, and industrial electrical work, with the ability to oversee teams, ensure quality compliance, and deliver projects on time and within budget. We deploy contractors across the New York Tri-State Area, CT, Pennsylvania, and New Jersey, and we are actively hiring contractors to train and deploy immediately to work orders. If you are interested in growing your career , please contact Lynn at 917-302-6449 or Charlie at 917-524-6129. You must meet the below requirements to be considered for contractor work. • MUST HAVE A FRIENDLY & PROFESSIONAL ATTITUDE!!!!!!!!!!, • Must be legally permitted to work in the USA., • Read and interpret blueprints, technical diagrams, and specifications, • Ensure all work adheres to local electrical codes and safety standards, • Estimate materials and labor required for projects, • Troubleshoot and resolve complex electrical issues, • Collaborate with clients, suppliers, and other tradespeople, • Must know how to troubleshoot offline media players (CAT 5 / 6 Tester)., • Must have Digital Menu Board experience., • Must have own tools., • Must have own laptop., • ABSOLUTELY MUST own truck, SUV, or mini van. Experience with the following: • MUST HAVE EXPERIENCE Mounting TV/Screens. (Do Not Apply if you don't have this experience)., • Previous work experience with cable installation is a plus., • Valid electrician license/contractor license in [State/Region], • Proven experience as an electrician, with leadership/contracting experience preferred, • Strong knowledge of electrical systems, tools, and safety procedures, • Ability to read schematics and technical diagrams, • Excellent problem-solving and communication skills, • Valid driver’s license and reliable transportation, • Fiber experience a plus. Company DescriptionDigistallers Inc. is an open platform for Digital Signage & Audio Video Technicians, who are seeking contractor work. We deploy contractors across the New York Tri-State Area, and we are actively hiring contractors to train and deploy immediately to work orders.Digistallers Inc. is an open platform for Digital Signage & Audio Video Technicians, who are seeking contractor work. We deploy contractors across the New York Tri-State Area, and we are actively hiring contractors to train and deploy immediately to work orders.

Job Description Job Title: Outdoor Lighting Technician (Part-time w/ transition to Full-time) Reports To: Owner Status & Salary: Non-Exempt - Hourly SUMMARY OF ROLE: Supports Company operations by performing all outdoor lighting installation or service tasks at the client’s home/work site as determined in the scope of work. The work, which is primarily outdoors, includes trenching, burying or laying-out wire runs, as well as assembling, wiring, replacing, or connecting low-voltage lighting systems, fixtures and/or bulbs. These duties and necessary functions are to be performed safely, professionally and in a timely manner to meet our client’s expectations and provide excellent service. ESSENTIAL DUTIES & RESPONSIBILITIES, including but not limited to: 1. Assembles lights and mounts them in prescribed locations, mounts transformers and connects wire runs., 2. Creates trenches/paths for wire runs and buries low voltage wiring in landscape areas and lawns., 3. Safely operates a variety of tools including hammer drills, power drills, saws, grinders and other tools as required., 4. Safely climbs and utilizes ladders to perform necessary installation and service tasks including mounts on gutters, soffits, trees, poles, fences or walls., 5. Cleans up all areas affected by the installation and performs maintenance on all Company tools and equipment used daily on work sites., 6. Communicates with client upon arrival at work site, to briefly explain/confirm the scope of work to be performed and estimated length of time to complete tasks., 7. Anticipates task problems and informs client of any issues and corrective action to complete task., 8. Speaks with client to inform and educate about additional products and services available., 9. Prepares and correctly completes any work order documents or reports., 10. Ensures adequate inventory levels are maintained to service clients., 11. Operates company vehicle in a safe manner, maintains a clean and orderly vehicle. Notifies management of any vehicle accidents, malfunctions or damages., 12. Sustains a work environment that builds positive professional relationships, accepts accountability, demonstrates excellent client service. Consistently demonstrates a commitment to complete scope of work., 13. Accomplishes organization goals by following required best practices. Promptly informs owner of any team member injury, issues/disputes with client, damage to structure, or Company tools/equipment., 14. Updates job knowledge by participating in training, successfully passes internal COLT (Certified Outdoor Lighting Technician) training, follows all company polices, safety rules and procedures including all highway traffic laws., 15. Performs other duties that may be assigned. KNOWLEDGE, SKILLS & ABILITIES · Exceptional interpersonal skills that positively benefits interaction with other team members and clients. · Ability and appreciation for working outdoors, in a range of weather conditions. · Ability to work both independently and as a team player. · Enthusiasm, positive attitude, trustworthiness, personal integrity and honesty. Makes a good first impression by being well-groomed, and comfortable meeting and interacting with people. · Must be detailed oriented, able to plan, prioritize, multi-task and meet deadlines in a fast-paced environment. · Good decision-making skills, with the ability to analyze information, and implement the best solution to solve problems or challenges. · Good comprehension and communication skills, with the ability to listen to and understand information and ideas presented through written and verbal communication. · Ability to exercise good judgment and self-control. · Demonstrates the ability to operate a vehicle according to established safety and risk management practices. · Works autonomously and understands when a superior needs to be involved in decision making. · Self-motivated, with a dedication to apply new knowledge to the job. · Available to work with a flexible schedule, including evenings and Saturdays. MINIMUM QUALIFICATIONS · High School degree or equivalent · Minimum of 1-year experience in a customer-service related industry · Must have valid NJ driver’s license at employment · Ability to successfully pass a background check, including a clean driving record, and other pre-employment screening. PHYSICAL REQUIREMENTS • Good general health, physical stamina, fitness and vitality. Must be able to perform outdoor work requiring physical exertion, heavy lifting, and to work continuously (whether standing, stooping, kneeling or crouching), • Frequently move the whole body to perform tasks such as lifting, walking, carrying, pushing, pulling and handling of materials.

Schneider Electric is looking for a HVAC Building Automation Specialist in the Secaucus, NJ area. This position is typically held by an individual with at least 2 years of experience in HVAC and Building Automation constructing low-voltage electrical systems and preferably industry knowledge. SKILLS

Job Description Job Summary The Switchboard Engineer I is responsible for Designing Low Voltage Switchboards and Panelboards. This role requires great attention to detail and a self-starting mentality. All products must be designed using applicable safety standards & regulations (National Electrical Code, Underwriters Laboratories, etc.). Primary Job Responsibilities • Design 3D Sheet Metal Parts With Flat Patterns, • Complete 3D Assemblies (150+ Item BOM), • Create Wiring Diagrams Using PLCs, Breaker Accessories, Relays, Contactors, Power Supplies etc., • Create & Understand 2D Front View, One-Line/Single-Line & Layout Drawings Using CAD Software, • Ensure Clear Communication Between Engineering, Manufacturing & Other Key Stakeholders, • Work In A Team Environment to Analyze Requirements From Clients & Develop Design Solutions, • Bachelor’s Degree of Science in Mechanical or Electrical Engineering or Similar, • 2-5 Years Of Work Experience (Electro-Mechanical Industry Preferred), • Proficiency In 2D & 3D CAD Software (AutoDesk Suite preferred), • Proficient With Microsoft Office Products, • Experience With UL891, UL67, UL508A or UL1558, • Experience Reading/Understanding National Electric Code, • Experience Sizing Conductors & OCPDs Raycap, Inc. has decades of experience creating products that protect and support the world’s most valuable assets from power and lightning surges. We focus on 5 Core Values of Customer Focus, Talent, Excellence, Innovation and Integrity, and those values show in everything we do. We also believe it is very important to invest in our employees, and we are proud to offer: • A very competitive benefit package, • Paid Time Off, • 10 company paid holidays, • Tuition Reimbursement, • A generous 401(k) employer contribution Raycap is an Equal Opportunity / Affirmative Action Employer. All qualified applicants receive consideration for employment without regard to age, disability, race, color, national origin, sex, marital status, sexual orientation, religion, creed, veteran or military status, or other protected status. We participate in E-verify for all employment verifications. Drug-free workplace

Job Description About US Vanderweil Engineers is a top ranked national full-service engineering firm specializing in MEP/FP, and technology services. Working in multiple sectors including Mission Critical Data Centers, Science & Technology, Academic, Healthcare and Commercial buildings. For over 75 years with a staff of 500+ located across nine offices, we are proud to be one of the leading independently owned engineering firms in the country. We offer mentorship, growth and stability in an ever-changing volatile environment. Join us to do the best work of your career as an Electrical Engineer on our growing team in either our Newark, NJ or our Philadelphia, PA office. What You will Achieve We are looking for an Electrical Engineer with 5+ years of experience in electrical consulting Engineering field to join Vanderweil as an Electrical Engineer. You will be involved in: • Work with Sr. Engineers and Project Managers to understand project goals and requirements, • Participate in meetings / discussions with the team members, including the owner, project architect, and other internal and external project disciplines., • Part of project team in designing the building infrastructure, including medium Voltage and Low Voltage electrical service, main electrical distribution equipment, building distribution equipment., • Document design calculations and design path decisions., • Model electrical distribution systems with our analysis software., • Perform electrical load calculations and electrical engineering studies., • Use Revit to model electrical systems is a plus., • 6+ years of related experience, • FE and or PE preferred, • Bachelor’s degree in Engineering, • Revit knowledge is a plus, • Understanding of the NEC, IBC and IECC. We know that work/life integration is important to our employees. Our hybrid work style (up to 2 days remote per week) allows team members to have flexibility while building their skills through in-person exposure to industry experts. We prioritize wellness with programs that support physical and behavioral health, and we’re proud to foster an equitable and inclusive workplace. Learn more about our culture at . The compensation that we expect to pay for this position is commensurate with years of experience, project portfolio, geographic location, professional licensure and education and is expected to range in the $95,000 to $140,000 range.

Job Description SERVICE MANAGER WITH ELECTRICAL OR MECHANICAL BACKGROUND 100K Plus Bonus Opportunities Service Manager wanted to lead a team of installation and maintenance technicians in the installation, inspection/testing, and repairs of low-voltage systems in high-rise office buildings. The service manager must provide primary technical oversight and direction for the services to be performed. Applicant must be capable of receiving and immediately dispatching emergency service calls, scheduling maintenance work as well as generating new service work plus tracking/managing all P&Ls and service requests obtained by office personnel. Responsibilities shall include but are not limited to tracking and closing out all maintenance calls. providing follow-up and quality control reports/proposals from the field personnel to verify that all work has been completed in a professional manner. The service manager shall also provide daily P&L reports on billing hours, ordering parts as well as overseeing work performed by sub-contractors. Must have proven verifiable experience in the service industry inclusive of hiring/firing. Unique opportunity for advancement for self-motivated individuals. Excellent salary, benefits, and bonus for a responsible individual. Company DescriptionFast pace Must have strong attention to detail and be able to meet deadlinesFast pace\nMust have strong attention to detail and be able to meet deadlines

Job Description Low Voltage Estimator / Engineer (Division 27/28) – New Jersey Company Description Coranet Corp is a leading national provider of low-voltage solutions, including Structured Cabling (Div. 27), Physical Security (Div. 28), Wireless, and AV. We partner with top technology brands to design, install, and maintain solutions that make buildings smart, secure, and connected. We are focused on the built environment and partnering with developers and general contractors to bring their visions to life. We're recognized as one of the fastest-growing private businesses (Inc. 5000 for four year in a row) and are a certified Women-Owned Small Business. Role Description We're hiring a talented Low Voltage Estimator. This is a high-impact role in a growing division where your work directly influences our win rate, profitability, execution, and future growth. You along with fellow estimators and engineers will own Division 27/28 estimating end-to-end - building competitive bids for new construction and renovations, working with sales to close deals, creating proposals for new and existing customers. We are looking for someone who can estimate the full low-voltage scope including CCTV, access control, Audiovisual, Wireless, BMS, and Structured Cabling systems and can engineer/solve scope gaps when needed (RFIs, leveling, alternates, clarifications). Bluebeam is essential. Experience in access control/security systems is strongly preferred (this is an area we're actively strengthening). What You'll Do • Own estimates from intake through submission: scope review, takeoffs, pricing, leveling, and final proposal., • Perform detailed takeoffs using Bluebeam Revu (drawings/specs, symbol sets, markups, quantities, revisions)., • Support sales on customer pitches and bid reviews adding your professional and technical voice to theirs., • Build complete Division 27/28 estimates: structured cabling, pathways/support, fiber, racks/cabinets, wireless, CCTV, access control, intrusion (as applicable), and related systems., • Use simPRO to build accurate estimates, labor, materials, assemblies, and job costing inputs., • Evaluate plans/specs, identify missing scope, and produce RFIs/clarifications., • Coordinate pricing with manufacturers, distributors, and subcontractors; negotiate and validate quotes., • Support and weigh in on competitive bid strategy: alternates, value engineering, exclusions/inclusions, and risk flags., • Hand off awarded projects cleanly to operations/PM: scope, assumptions, labor plan, and procurement notes., • Track bid pipeline and follow-ups; assist with forecasting and award probability updates., • 3+ years of experience in low-voltage integration projects, with 2+ years dedicated estimating experience (more is welcome)., • Proven experience in estimating Division 27/28 work for commercial new build and renovation projects., • Strong Bluebeam Revu skills (takeoffs, markups, measurements, revisions, toolsets)., • Ability to read and interpret construction documents: plans, specs, addenda, schedules, and vendor cutsheets., • Comfortable producing competitive bids and customer-facing proposals with clean scope language., • Strong communication and follow-through with internal teams, vendors, and customers., • Knowledge of residential and commercial low voltage technologies (WiFi, CCTV, access controls, and structured cabling systems), including products from industry leaders, with industry and/or manufacturer training and certifications as a plus., • Experience with Access Control & Security Systems (HID/LenelS2/Genetec/AMAG/Butterfly/Software House/Axiom/VMS platforms-any is a plus)., • Ability to "light engineer" when needed: device placement logic, system architecture considerations, riser/schematics coordination, and identifying design gaps., • Experience with simPRO (or similar estimating/ops platform).

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking a Director - Control, Instrumentation and Diagnostics (CID) Systems to lead CID system design and execution for the company’s upcoming Eos integrated stellarator. This leader will manage and grow three tightly coupled engineering groups:- Control Systems (Eos control system architecture and integration, including fast data acquisition, PLC automation, Safety and Interlock Systems)- Instrumentation Systems (instrumentation backbone across the facility, including sensors, signal architecture, wiring, grounding, shielding, tagging, and commissioning practices)- Diagnostics Systems (plasma diagnostics control and acquisition, including real time DAQ, timing and synchronization, and low latency data pipelines for plasma control) This role will own the end-to-end delivery of CID systems from architecture and requirements through detailed design, prototyping, vendor engagement, test, installation support, and commissioning readiness. The Director will serve as a key cross-functional partner to systems engineering, controls and software, mechanical engineering, safety, and program management, ensuring electrical designs are buildable, testable, safe, and integrated. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. This role will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Lead and mentor a multi-disciplinary organization spanning control systems, instrumentation, diagnostics acquisition, embedded software, and real time integration, including hiring, performance management, career development, and team structure., • Establish engineering operating rhythm: planning, prioritization, technical reviews, staffing plans, and decision-making processes., • Set technical direction and ensure consistent engineering quality across requirements, architecture, implementation, verification, and documentation., • Own the Eos CID architecture, including functional, physical, communications, timing, and data flow boundaries across fast DAQ, supervisory control, PLC automation, safety interlocks, and diagnostics acquisition., • Lead technology selection for real time control, SCADA, networking, timing, and data management, and ensure consistency across integration protocols and data interfaces., • Own the technical interface to external vendors and collaborators providing controls hardware, diagnostics hardware, and instrumentation deliverables, including technical specifications, design reviews, and acceptance participation., • Oversee development and integration of the Eos control system across major subsystems, ensuring deterministic behavior, fault handling, and operational sequencing., • Own Safety and Interlock System philosophy, including safety class logic where required, participation in hazard analyses, and alignment to functional safety practices and standards., • Own instrumentation architecture across the facility: sensor selection, signal types, isolation strategy, signal conditioning, grounding, shielding, and segregation practices for noisy, high power environments., • Oversee diagnostic acquisition architecture end to end, from front end sensors and conditioning through digitizers, FPGA processing, data streaming, and archiving in support of plasma operations and feedback control., • Partner with systems engineering to translate device requirements into CID requirements, interface definitions, and verification plans., • Run evidence based technical gates and design reviews, with clear entry and exit criteria and configuration control., • Own delivery artifacts such as requirements, interface control documents, design packages, test plans, and acceptance evidence to support procurement, installation, and commissioning., • Maintain a strong safety culture including machine protection thinking, hazard analysis inputs, and design choices that support safe installation and operations., • Provide hands on leadership in lab and field environments, coordinating with technicians and test teams for build, wiring, installation support, and debug.Ideal Experience & Skillsets:, • Bachelor’s degree or higher in Electrical Engineering, Controls, Computer Science, Physics, or equivalent., • 10 or more years of relevant experience spanning two or more of the following: integrated control systems, industrial automation, fast data acquisition, instrumentation systems engineering, diagnostics acquisition, real time embedded software., • 5 or more years of engineering management experience leading multi team organizations, including hiring and performance leadership., • Demonstrated experience owning complex system development from architecture through prototype validation and integration., • Strong foundation in safety and high reliability engineering practices, including interlocks, alarms, fail safe design, and disciplined documentation., • Strong cross functional communication skills and experience driving technical decisions across physics, mechanical, electrical, safety, and program teams., • Exceptional work ethic and communication skills., • Experience delivering CID systems for fusion devices, accelerators, advanced nuclear, or other large scientific facilities with tight timing and data fidelity requirements., • Experience with EPICS or TANGO, and industrial integration protocols such as OPC UA, DDS, Modbus, and deterministic timing networks., • Experience with functional safety workflows and standards driven PLC systems engineering., • Experience with FPGA based acquisition and low latency streaming pipelines for real time feedback and machine protection., • Familiarity integrating AI and digital twin capabilities into supervisory control and operations workflows., • Control frameworks and integration: LabView, EPICS, TANGO, OPC UA, DDS, Modbus, TCP IP., • PLC platforms: Siemens TIA Portal, Beckhoff TwinCAT, Allen Bradley, Codesys, IEC 61131 3 practices., • Timing and synchronization: White Rabbit, IEEE 1588 PTP., • Data acquisition and diagnostics: PXIe digitizers, FPGA platforms, event and timestamping frameworks, data streaming infrastructure., • Embedded and middleware software: real time embedded Linux and real time operating systems, C and C++, distributed orchestration tooling., • Instrumentation design and documentation: AutoCAD Electrical, EPLAN, tag databases, input and output lists, cable schedules and loop diagrams.Company Benefits:, • Salary range $120,000-$240,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Job DescriptionOverview Company Overview: Join Allied Universal® Technology Services, a global leader in transforming the security industry. We integrate advanced technology - video surveillance, electronic access control, alarm monitoring and augmented solutions with physical security to help people feel safe. Whether you're an installation technician, service technician, engineer, or project manager, you'll discover rewarding opportunities to grow your career as part of a valued team. Apply today and be phenomenal-build a meaningful career while protecting what matters most through innovative security technology. Job Description What to expect as a Commercial Security Installation Technician III: • Assist the Project Manager regarding on-site scheduling of work activities and timely delivery of equipment, • Responsible for the connection of control panels, application requirements, wire concealment, and security software installation, • Install, program and configure commercial electronic security systems for enterprise commercial clients (door access control, CCTV, intrusion detection, low voltage communication, electronic locks, point sensors, signaling devices, ect.), • Troubleshoot new installations to ensure the systems are functioning properly and satisfy codes, • Demonstrate Allied Universal's core values as a highly skilled leader on the Installation Team, • Supervise several teams comprised of Security Installation Technician I's and II's, • Manage several medium- to large-sized jobs simultaneously, doing so within approved hours and margin tolerances, • Drive to client sites with a company-issued vehicle to perform the system installation and confirm the system is operating effectively and meets contract requirements, • Installation of electrical wiring, panels, cables, and security devices, • A high school diploma or equivalent is required, • Minimum 2-3 years of experience in the physical security, fire alarm or low voltage communication industry installing field devices, programming systems, and running medium- to large-sized jobs, are required, • Experience with any or all of the following is preferred: Software House, Lenel, AMAG, S2, Brivo, Milestone, Exacq, Axis, Bosch, Commend, DMP, Open Options, Notifier, Fluidmesh or ONSSI, • Possess or have the ability to obtain proper state licensing once hired (Low Voltage D license, Alarm Installer Lic. etc.), • Ability to meet deadlines and work in a fast-based environment with minimum direction, • Good communication skills for effective interaction with internal and external customers, • Strong troubleshooting skills and mechanical aptitude, • Ability to be on-call on a rotational basis, • Must be detail-oriented and organized Must possess a valid driver's license with at least one year of driving experience, a clean driving record (no major violations within the last 36 months, no more than 1 accident in last 24 months, no more than one minor moving violation in last 24 months), a minimum level of insurance as required by company policy, and the ability to safely operate a vehicle. • Ability to complete time entry from home on a daily basis via the Internet, • Ability to deliver product familiarization training to end-users, • Strong proficiency in Microsoft Office products (Word, Excel, and Project), • Ability and track record of successfully loading servers with third-party applications and deploying IP video solutions, • Possess general working knowledge of network architecture, • Salary range: $35 - $45 hourly, • Medical, dental, vision, retirement plan, basic life, AD&D, and disability insurance, • Eight paid holidays annually, five sick days, and four personal days, • Vacation time is offered at an accrual rate of 3.08 hours biweekly. Unused vacation is only paid out where required by law. #LI-26 Closing Allied Universal® is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: If you have difficulty using the online system and require an alternate method to apply or require an accommodation, please contact our local Human Resources department. To find an office near you, please visit: . Requisition ID 2026-1548847

Job Description Low Voltage Project Coordinator Location: Fairfield, NJ Reports to: Project Manager and Operations Company Description Coranet Corp is a leading national provider of Low Voltage Solutions - Structured Cabling Infrastructure, Wireless, Audio-visual, and Physical Security (access control and video surveillance). We partner with leading technology brands to design, install, and maintain comprehensive low-voltage solutions for our clients' real estate assets. We have won accolades as one of the fastest-growing private businesses in Inc. 5000 for four years in a row. We help companies of all sizes leverage low-voltage infrastructure solutions to modernize their operations and make their assets smart, secure, and connected. Position Summary As a Project Coordinator at Coranet, you will support and assist the operations team and Coranet project managers from start to completion of low-voltage IT infrastructure projects. Project Coordinators are the key liaisons between our Field Teams, Project Managers, Customers, and Partners. The Project Coordinator assists in proactively driving project execution, maintains clear and timely communication, and ensures we consistently exceed customer expectations. The ideal candidate will have strong organizational and communication skills, be self-motivated, and adaptable to the demands of our low-voltage integration project. You will have the opportunity to grow within our organization on a well-defined track and take on select individual account responsibilities. Project coordinators should be well-versed in current technology and tools - able to utilize basic computer programs from Outlook to Excel, as well as AI and other new PM tools to improve their job function and our project delivery. Project coordinators play a key role before working as project managers at Coranet. Key Responsibilities • Documentation, Permitting & Closeout: Create and manage submittals, permits, as‑builts, warranties, test‑result PDFs, labels, and closeout packages in SimPro, • Scheduling & Procurement: Update project schedules in Teams; enter and track POs in SimPro; generate weekly time‑tracking reports for PM review., • Field Engagement, Support, and Management: Assist in leading project on‑site kickoffs and surveys; support quality inspections; shadow PMs on small‑job scoping and quoting., • Communication & Reporting: Provide weekly status updates internally to PMs/executive team and externally to customers, subcontractors, and partners., • Project Management: Join project managers on client calls and status updates, assist with day-to-day activities, • Issue Resolution: Anticipate and escalate risks; coordinate corrective actions to keep projects on schedule and within scope., • Customer Advocation: Act as clients' point of contact, manage expectations, resolve concerns, and ensure "right‑first‑time" delivery., • Project Tracking: Track project and JCO progress through SimPro. Career Path Project Administrator → Project Coordinator → Assistant Project Manager → Project Manager How You'll Succeed: By taking personal initiative, ownership of project workflows, staying attentive to deadlines, maintaining proactive communication, learning and expanding your knowledge of our services and solutions, and relentlessly pursuing "right‑first‑time" quality, you'll help Coranet deliver outstanding results and earn repeat business.

Job Description Job Summary: The Engineer at Hyatt Place is responsible for maintaining the property’s overall functionality, including the building, equipment, and grounds. This role ensures that all hotel facilities and services operate smoothly and efficiently, providing guests with a safe and comfortable experience. Key Responsibilities: • Preventive Maintenance: Perform routine maintenance tasks on all mechanical equipment, HVAC systems, plumbing, electrical systems, and other hotel assets. Ensure the upkeep of guest rooms, public spaces, and back-of-house areas., • Repair Work: Respond promptly to guest or management requests for repair services. Troubleshoot and repair issues related to plumbing, electrical, HVAC, and other mechanical systems., • Safety and Compliance: Maintain the hotel's safety standards by conducting regular inspections and tests, ensuring that all equipment is in compliance with local, state, and federal regulations. Participate in fire drills and safety programs., • Energy Management: Monitor and control energy usage throughout the hotel, looking for ways to improve efficiency and reduce costs., • Documentation: Keep accurate records of maintenance work, inspections, and repairs. Report any unsafe conditions or equipment that requires replacement., • Vendor Coordination: Work with outside contractors and vendors for specialized repairs or maintenance tasks. Oversee their work to ensure it meets the hotel’s standards., • Team Collaboration: Work closely with the housekeeping and front desk teams to address guest concerns and maintain the overall appearance and functionality of the hotel., • Emergency Response: Be available to respond to emergencies, such as power outages, plumbing issues, or fire alarms. Act swiftly to mitigate any issues., • Education: High school diploma or equivalent required; technical or vocational training preferred., • Experience: Previous experience in hotel maintenance or engineering preferred. Experience with HVAC, plumbing, electrical, and mechanical systems is highly valued., • Skills: Strong problem-solving skills, attention to detail, and ability to work independently. Good communication skills and the ability to interact positively with guests and team members., • Certifications: Relevant certifications (e.g., HVAC, EPA) are preferred. The role may require working varied shifts, including nights, weekends, and holidays, depending on the hotel's needs. Requirements • A degree in a relevant field such as mechanical, electrical, or industrial engineering., • Proven experience in a manufacturing facility as a maintenance engineer or in a similar role., • Strong analytical and problem-solving skills., • Knowledge of electrical systems and the ability to use a multimeter, including high and low voltage systems., • Basic welding skills., • Excellent communication and customer service skills., • Ability to work independently and as part of a team., • Physical stamina to perform tasks in a fast-paced environment. Benefits: • Competitive salary, • Health and dental insurance, • Paid time off, • Employee discounts at Hyatt properties, • Opportunities for career advancementCompany DescriptionWe are in the business of caring for people so they can be their best. Our aim is to create long-term relationships built on being the most loved and preferred brand, employer and partner throughout the world.We are in the business of caring for people so they can be their best. Our aim is to create long-term relationships built on being the most loved and preferred brand, employer and partner throughout the world.

We are looking for an experienced Low Voltage Project Manager to join our dynamic team in New Jersey. Lead project execution with subcontractors to plan, coordinate, and install low-voltage systems. Minimum 3 years of experience in low voltage installations or a related field (Technician).

Job DescriptionWho is Flock? Flock Safety is the leading safety technology platform, helping communities thrive by taking a proactive approach to crime prevention and security. Our hardware and software suite connects cities, law enforcement, businesses, schools, and neighborhoods in a nationwide public-private safety network. Trusted by over 5,000 communities, 4,500 law enforcement agencies, and 1,000 businesses, Flock delivers real-time intelligence while prioritizing privacy and responsible innovation. We’re a high-performance, low-ego team driven by urgency, collaboration, and bold thinking. Working at Flock means tackling big challenges, moving fast, and continuously improving. It’s intense but deeply rewarding for those who want to make an impact. With nearly $700M in venture funding and a $7.5B valuation, we’re scaling intentionally and seeking top talent to help build the impossible. If you value teamwork, ownership, and solving tough problems, Flock could be the place for you. Pay: $65,000/year + Overtime + Stock Options Travel: 1-2 weeks per month, up to 50% The Role Join our Field Operations team and help keep communities safe by installing and maintaining camera and solar infrastructure. As a growing multi-product company, this role now spans both new installations and ongoing maintenance across a wide variety of sites, equipment, and customer environments. You’ll work hands-on in the field, adapt to dynamic schedules, and see the impact of your work every day. What You’ll Do * Install, maintain, and service poles, solar panels, batteries, and camera systems across diverse customer sites * Install poles of varying lengths per specifications, including digging post holes a minimum of Mount solar panels and external batteries; install and align LPR cameras with PTZ technology * Perform both installations and maintenance (approximately 50/50 split) * Work on public and private roadways, frequently on equipment 10–12 feet high * Use ladders and bucket trucks to safely work at heights of up to 30 feet * Use power and hand tools; repair minor breaks in underground irrigation or private wiring * Drive company vehicles and tow small trailers; support DFR (Drone as First Responder) units and mobile security trailers * Meet with customers to perform site surveys and discuss installation options * Interpret traffic control plans and permit drawings to identify compliant installation locations * Track inventory, receive shipments, and submit installation photos and updates via the Flock Field mobile app * Perform all work in a safe, professional, and compliant manner * Adapt to dynamic scheduling, often with 2–3 days’ notice Travel Expectations This position requires a 50% travel commitment, typically consisting of 1–2 weeks of travel per month. You should expect to be in the field Monday through Friday, with the occasional Saturday required for travel or project completion. What We’re Looking For * Comfortable with physical work, including lifting up to 50 lbs, climbing, and working outdoors * Experience in construction, electrical, low-voltage wiring, or similar hands-on roles preferred * Strong mechanical aptitude and comfort using tools and equipment * Ability to work independently across varying job types and environments * Comfortable driving vans and trucks and towing small trailers (Must be 21+ with a valid driver’s license) * Basic computer and mobile app skills; willingness to learn new technology * Flexible, dependable, and adaptable to changing priorities Feeling uneasy that you haven’t ticked every box? That’s okay; we’ve felt that way too. Studies have shown women and minorities are less likely to apply unless they meet all qualifications. We encourage you to break the status quo and apply to roles that would make you excited to come to work every day. The Perks ????Flexible PTO: We offer non-accrual PTO, plus 11 company holidays. ⚕️Fully-paid health benefits plan for employees: including Medical, Dental, and Vision and an HSA match. ????Family Leave: All employees receive 12 weeks of 100% paid parental leave. Birthing parents are eligible for an additional 6-8 weeks of physical recovery time. ????Fertility & Family Benefits: We have partnered with Maven, a complete digital health benefit for starting and raising a family. Flock will provide a $50,000-lifetime maximum benefit related to eligible adoption, surrogacy, or fertility expenses. ????Spring Health: Spring Health offers a variety of mental health benefits, including therapy, coaching, medication management, and digital tools, all tailored to each individual's needs. ????Caregiver Support: We have partnered with Cariloop to provide our employees with caregiver support ????Carta Tax Advisor: Employees receive 1:1 sessions with Equity Tax Advisors who can address individual grants, model tax scenarios, and answer general questions. ????ERGs: We want all employees to thrive and feel like they belong at Flock. We offer four ERGs today - Women of Flock, Flock Proud, LEOs and Melanin Motion. If you are interested in talking to a representative from one of these, please let your recruiter know. ????WFH Stipend: $150 per month to cover the costs of working from home. ????Productivity Stipend: $300 per year to use on Audible, Calm, Masterclass, Duolingo, Grammarly and so much more. ????️ Tools & Gear: Flock Safety-branded uniforms, tools, and safety gear as well as an annual $250 uniform expense allowance ???? Work Vehicle: The use of a well-equipped Flock Safety owned Sprinter van and fully-paid-for gas card #ZR Flock is an equal opportunity employer. We celebrate diverse backgrounds and thoughts and welcome everyone to apply for employment with us. We are committed to fostering an environment that is inclusive, transparent, and collaborative. Mutual respect is central to how Flock operates, and we believe the best solutions come from diverse perspectives, experiences, and skills. We embrace our differences and know that we are stronger working together. If you need assistance or an accommodation due to a disability, please email us at . This information will be treated as confidential and used only to determine an appropriate accommodation for the interview process. At Flock Safety, we compensate our employees fairly for their work. Base salary is determined by job-related experience, education/training, as well as market indicators. The range above is representative of base salary only and does not include equity, sales bonus plans (when applicable) and benefits. This range may be modified in the future. This job posting may span more than one career level. Flock Safety is aware of fraudulent individuals and agencies falsely claiming to represent our company. All legitimate communication from Flock Safety will come from an email address ending in @flocksafety.com. We do not make job offers through messaging apps, social platforms, or unauthorized third parties, and we will never request payment or sensitive personal information during the hiring process. If you encounter suspicious outreach related to a Flock Safety role, please report it to Compensation Range: $65K

Job DescriptionDescription: Atlantis Partners is an Audio Visual Installation company who works with Fortune 100 corporations and supports the legal, corporate, financial, educational, entertainment, hospitality, and medical markets throughout the US. We are actively interviewing at this time for upcoming projects in New York, NY. Seeking experienced Audio Visual Installation Technicians for Low Voltage Commercial Installation. *Commercial Audio Visual Installation experience Required. AUDIO VISUAL TECHNICIANS WILL BE INSTALLING • Ceiling mounted video projectors, • Speaker systems, • Wall mounted cameras, • Control panels, • Running and terminating of low voltage cabling., • Equipment rack installations, • TVs/TV mounts PPE required to be on site. Requirements: Experience: • Low voltage Installation: 2 years (Preferred), • Commercial Audio Visual Installation: 1 year (Preferred) Willingness to travel: 25% (Preferred) Work Location: On the road Schedule: 8 hour shift Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off, • Professional development assistance, • Referral program All client sites require COVID 19 vaccinations to be on premises.

Job DescriptionDescription: Atlantis UGS is an Audio Visual Installation company who works with Fortune 100 corporations and supports the legal, corporate, financial, educational, entertainment, hospitality, and medical markets throughout the US. We are actively interviewing at this time for upcoming projects near Cary and Raleigh, NC. Seeking experienced Audio Visual Installation Technicians for Low Voltage Commercial installation. *Commercial Audio Visual Installation experience Required. _ _ Benefits offered to our Atlantis Partners Employees: • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off, • Professional development assistance, • Referral program, • Vision insurance THE AUDIO VISUAL TECHNICIAN WILL BE INSTALLING • Ceiling mounted video projectors, • Speaker systems, • Wall mounted cameras, • Control panels, • Running and terminating of low voltage cabling., • Equipment rack installations, • TVs/TV mounts, • Video walls ETC.Requirements:, • AV Equipment Installation on Commercial Jobsite: 3 years (Preferred), • Ceiling Speaker Installation: 1 year (Preferred), • Large Display Mounting: 1 year (Preferred), • Low voltage: 2 years (Preferred), • Structured Cabling: 2 years (Preferred), • Commercial Audio Visual Installation: 2 years (Required), • It is a Plus to have: OSHA10, OSHA30, SST, • It is a Plus to be certified with Extron, Centron, AMX or CTS License/Certification: COVID-19 considerations: All of our customers are requiring onsite technicians to be fully vaccinated

Job Description Drive the Future with Xos Xos (NASDAQ: XOS), is a technology company and electric truck manufacturer on a mission to decarbonize commercial transportation. We design and build state-of-the-art electric vehicles, develop advanced fleet management software, and create charging solutions that make fleet electrification seamless and cost-efficient. At Xos, we're problem-solvers, innovators, and go-getters, working together to drive a cleaner, more sustainable future. Join us and be part of the movement shaping the next generation of commercial transportation. The Role Xos is hiring an experienced Field Service Technician responsible for diagnosing, repairing, and reporting on Xos vehicles. Operating primarily in the field, this role requires a high level of productivity and self-reliance while traveling. The Field Service Technician is responsible for taking customers' stated concerns and quantifying those into actionable technical issues. Detailed reporting on the cause, root cause, and corrective actions will drive improved production quality as well as field fix development. Exceptional customer service, knowledge of the complete vehicle, in addition to battery systems, is key to success in this position. This role will focus on servicing the East Coast and will require multi-state travel to support customer and field service needs Responsibilities • Diagnose, repair, and report on quality and design concerns on Xos vehicles and products., • Collaborate with internal teams such as design, engineering, software, and external partners., • Demonstrate proficiency in low voltage (LV) and high voltage (HV) electrical diagnosis, controls, and module programming., • Apply in-depth knowledge of basic electrical concepts, including the use of various volt-ohm meters., • Possess strong mechanical knowledge of commercial truck mechanical systems with experience in motors and harness systems preferred., • Provide professional customer facing support through face-to-face interactions and through phone and email communications., • Complete timely and accurate case notes, repair orders, and initiate new cases as required., • Demonstrate professional appearance and effective communication skills with customers on-site and in remote interactions., • Complete training objectives and certifications as assigned by management., • Perform additional duties as assigned. Qualifications • Proven proficiency with high and low voltage electrical systems., • Associates Degree or Vocational Certificate in automotive service technology related field or 4+ years of relevant experience., • ASE Certifications are a plus, • CDL class A or B preferred, • Proficiency in Google Suite applications, • Ability to read and interpret electrical schematics, • A valid Driver's License and a clean driving record are required for this position, as driving is an essential function of the role., • Ability to meet security clearance requirements for employment and comply with all applicable pre-employment conditions, including those required by federal or customer-regulated work environments., • Must be available to travel as business needs require (typically 60-80% of the time including overnight stays) , including weekends, holidays, and outside standard business hours. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. While performing the essential functions of this job, the employee is regularly required to lift over 50 pounds, perform work under commercial vehicles with the use of personal protective equipment from the ground at various worksite locations, including outdoors and in varying weather conditions. The salary range for this role is specific to the locations listed below and is the range Xos Inc. reasonably and in good faith expects to pay for this role at the time of this posting. We may ultimately pay more or less that the posted range, and the range may be modified in the future. An employee's pay position within the salary range will be based on several factors, including not but limited to, job-related knowledge, skillset, relevant education, qualifications, certifications, geographic location, and other business or organizational factors. • New Jersey: $30.00 - $35.00 (+ ) DOE, per hour Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. While performing the essential functions of this job, the employee is regularly required to lift over 50 pounds, perform work under commercial vehicles with the use of personal protective equipment from the ground at various worksite locations, including outdoors and in varying weather conditions. Benefits & Perks Xos is a people-focused company—we are committed to providing our employees with a comprehensive package of benefits and perks designed to support their well-being and professional growth. We continually evaluate and expand our offerings to best serve our team. • Comprehensive Medical, Dental, and Vision - Coverage for you and your family, with PPO and HMO (California) plans available. We offer plans with 100% covered employee premiums. Employees can also enroll in a variety of voluntary ancillary benefits to further support their needs., • HSA & FSA Plans - Set aside pre-tax dollars for qualified healthcare expenses., • PTO - Accrue vacation time over time, with additional days earned as your tenure grows, plus sick time and paid holidays!, • Generous Company Holidays - Enjoy a generous holiday calendar, including a winter holiday hiatus in December., • Basic Life & AD&D Insurance - 100% covered by Xos, with the option to purchase additional life insurance coverage for yourself and eligible dependents., • Betterment 401(k) - Save for retirement with our employer-sponsored plan through Betterment., • Pet Insurance - Coverage for your furry friends to keep them healthy and happy! Commitment to Equal Opportunity Xos is proud to be an Equal Opportunity Employer and will consider all qualified applicants for employment without regard to race, color, gender, pregnancy, sex, sexual orientation, gender identity, gender expression, national origin, age, genetic information, ancestry, protected veteran status, disability, or any other basis protected by local, state, or federal law. Xos provides equal access to services and employment to all qualified persons. For applicants with disabilities or limitations, such as those covered by the Americans with Disabilities Act, requiring accommodations to complete the application and/or interview process, please email us at Candidate Data Privacy This notice describes how Xos (as used in this Notice, the terms "Company," "Xos," "we," "our," or "us" in this Notice refers to Xos, Inc., together with its subsidiaries and other corporate affiliates, who may handle your candidacy and application for employment) may collect, process, and use your personal data in connection with the recruitment process when you apply for a position. Xos may collect, use and disclose your personal information or personal data (within the meaning of the applicable data protection laws) when you apply for employment and/or participate in the recruitment process ("Candidate Personal Data"). This data includes contact, demographic, communications, educational, professional, employment, social media/website, network/device, recruiting system usage/interaction, security and preference information. Xos may use your Candidate Personal Data for the purposes of (i) tracking interactions with our recruiting system; (ii) carrying out, analyzing and improving our application and recruitment process, including assessing you and your application and conducting employment, background and reference checks; (iii) establishing an employment relationship or entering into an employment contract with you; (iv) complying with legal, regulatory and corporate governance obligations; (v) recordkeeping; (vi) ensuring network and information security and preventing fraud; and (vii) as otherwise required or permitted by applicable law. Xos may share your Candidate Personal Data with (i) internal personnel who have a need to know such information in order to perform duties, including individuals on our People Operations Team, Finance, Legal, and the team(s) with the position(s) for which you are applying; (ii) Xos affiliates; and (iii) Xos's service providers, including providers of background checks, staffing services, and cloud services. Where permitted by applicable law, Xos may transfer or store internationally your Candidate Profile Data, including to or in the United States, Canada, the United Kingdom, and the European Union and in the cloud, and this data may be subject to the laws and accessible to the courts, law enforcement and national security authorities of such jurisdictions. Notice to Recruitment Services Xos is not accepting applications from third-party recruitment services at this time. Unsolicited resumes or candidate profiles submitted in response to our job postings will not be subject to any referral or placement fees unless a written agreement is in place with Xos for the specific job opportunity.

Wallace William is looking for multiple Structured Cabling and Low Voltage Technicians to work on large new and existing construction projects in NYC. Must have all your low voltage hand tools and PPE Gear.

Securitas Technology Corporation (STC) Technology and Solutions groups are experiencing tremendous success, and we currently have an Embedded Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering.In this role, you will be resp