Trabajos machinist en Massapequa, NYCrear alertas

Job Description CNC Machine Maintenance Engineer - Garden City, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The CNC Machine Maintenance Engineer position is responsible for performing highly diversified duties to install, troubleshoot, repair, and maintain production and facility equipment according to safety, predictive, and productive maintenance systems and processes to support the achievement of the sites business goals and objectives. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Perform highly diversified duties to install and maintain production machines and the plant facilitys equipment., • Provide emergency/unscheduled repairs of production equipment during production and perform scheduled maintenance repairs of production equipment during machine service. Must have experience with Vacuum Braze Ovens., • Perform simple machinist duties and responsibilities., • Perform mechanical skills, including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting, and repair of production machines., • Read and interpret equipment manuals and work orders to perform required maintenance and service., • Diagnose problems, replace or repair parts, test, and make adjustments., • Perform regular preventive maintenance on machines, equipment, and plant facilities., • Perform a variety of plumbing maintenance and carpentry functions., • Use a variety of hand and power tools, electric meters, and material handling equipment in performing duties., • Detect faulty operations, defective material, and report those and any unusual situations to proper supervision., • Comply with safety regulations and maintain clean and orderly work areas. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Technical Capacity., • Good Troubleshooting Ability., • Ethical Conduct., • Communication Proficiency., • Results Driven., • Initiative., • Valid Drivers License., • Experience with the maintenance of CNC Machines or Vacuum Braze Ovens EDUCATION AND/OR EXPERIENCE • High school diploma/GED and completion of a craft apprenticeship, or an equivalent number of years of education and production maintenance experience., • 2+ years of manufacturing experience; some hydraulic, pneumatic, mechanical, and industrial skills with PLC experience, Industrial and Commercial electric, and HVAC., • AA in mechanical or electrical Engineering or a Certificate in Analytical Troubleshooting preferred. 5+ years in manufacturing/facilities maintenance preferred. PHYSICAL DEMANDS • While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items over 50 pounds., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Fine manipulation and repetitive motion may be required for some duties. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $110,000 to $125,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

CNC Machinist 1st Class We are looking for a CNC Machinist to join our Target Rock team! As our CNC Machinist, you are responsible for the set-up and operation of CNC equipment within a given manufacturing department. You will perform these activities in compliance with Company procedures and quality requirements. You will also be able to perform quality inspections to own work and make adjustments as required working with minimal supervision. Additionally, you will have the ability to read CNC code as required for the work centers within the department as well as making minor editorial changes to programs as requested by supervision. Location: East Farmingdale, NY Salary/hourly rate: $32.08 to $37.78 Please note that the salary range information provided is a general guideline only, reflecting a position based in New York. Criteria such as the candidate's qualifications and relevant experience, the scope of the specific position, as well as market and business considerations will be evaluated when extending an offer. We Take Care of Our People Paid Time Off I 401K with Employer Match and Profit Sharing I Health and Wellness Benefits I Learning and Development Opportunities I Referral Program I Competitive Pay I Recognition I Employee Stock Purchase Plan I Inclusive & Supportive Culture * Your Challenge \n • Ability to set-up and operate CNC equipment within a given manufacturing department. Including tool offsets and compensations.\n, • Proof CNC Code as provided by CNC Programmers\n, • Work in conjunction with CNC Programmers to optimize processes.\n, • Responsible to maintain quality and productivity standards.\n, • Blueprint reading\n, • Ability to use inspection equipment and inspect own work.\n, • Calculate and adjust feeds and speeds of material cutting as required.\n, • Ability to sharpen cutting and grind form tools as required within the department.\n, • Responsible for accuracy of CNC Program documentation upon completion.\n, • Must be a US citizen\n, • High School Graduate or equivalent, shop mathematics and Trigonometry Skills.\n, • Five (5) years of manufacturing or related experience.\n, • General good housekeeping practices within work area.\n, • Review work center for maintenance compliance.\n, • Maintain correct time reporting and accurate entries on applicable manufacturing documentation.\n, • Comply with Company quality and safety requirements\n Our Values Environmental, Social and Governance Founded in 1951 to meet the special severe service valve requirements of the United States Nuclear Navy, Target Rock is today the premier supplier of highly engineered, valves and related products to both the U.S. Navy nuclear fleet and the global nuclear power generation industry. The first Target Rock valves were installed on the U.S.S. Nautilus, the U.S. Navy's first nuclear powered submarine. To learn more, please visit us at Curtiss-Wright EMS - Target Rock (cw-ems.com) *Please note, benefits are country specific and may vary from location to location. #LI-CM1 No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Resumes submitted directly to any Curtiss-Wright employee or affiliate will not qualify for fee payment, and therefore become the property of Curtiss-Wright. Compliance Statement This position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn. Curtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition. For US Applicants: EEO is The Law - click here for more information. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

Job Description About Check-Mate Industries At Check-Mate Industries, Inc., a leader in precision manufacturing, we’re shaping the future of industries like aerospace, automotive, firearms, cosmetics, and medical. Our Thomasville, GA and West Babylon, NY facilities are a hub of innovation, where your skills as a CNC Machinist Programmer will help deliver high-quality solutions to global customers. With over 50 years of excellence, we’re known for out-thinking, out-maneuvering, and out-performing the competition. Join a collaborative team that values your expertise, fosters growth, and prioritizes safety and inclusion. Why Join Us? • Career Advancement: Access training, certifications (e.g., NIMS), and pathways to leadership or specialized roles., • Innovative Environment: Work with cutting-edge CNC technology and industry-standard software like Mastercam., • Impactful Work: Craft precision parts for critical applications, from life-saving medical devices to law enforcement tools., • Comprehensive Benefits: Enjoy competitive health plans, paid time off, and retirement options (details provided during hiring)., • Program CNC Machines: Use Mastercam or similar software to create programs, offsets, and calculations for precise part fabrication., • Set Up & Operate Equipment: Configure vertical and horizontal CNC milling centers and other machines, selecting tools, fixtures, and materials based on blueprints or CAD designs., • Quality Control: Inspect finished parts with tools like micrometers, calipers, and gauges to ensure blueprint accuracy., • Assembly & Testing: Assemble parts into complete units and test functionality using jigs, fixtures, and precision instruments., • Maintenance & Troubleshooting: Perform routine machine maintenance, diagnose issues, and schedule repairs to maintain efficiency., • Collaboration: Work with engineers, programmers, and inventory managers to optimize processes and resolve challenges., • High School Diploma or GED from an accredited institution., • 1-5 years of experience with CNC machines and programming (entry-level candidates with relevant training encouraged to apply)., • Proficiency with Mastercam or similar CNC programming software., • Experience using measuring tools (e.g., calipers, micrometers, height/depth gauges)., • 3-5 years of machining experience in a manufacturing environment., • Familiarity with shop floor control software (e.g.,PLEX, IQMS MES, TrakSYS, E2 Shop System, MasterCam)., • Experience with CAD software (e.g., AutoCAD, SketchUp, SolidWorks)., • Work in a fast-paced industrial setting with moderate to loud noise (hearing protection provided)., • Stand, sit, or walk for extended periods; occasionally lift up to 50 pounds or reach overhead., • Requires close vision, color vision, and ability to read small print or computer screens., • Skill Growth: Master advanced CNC programming and work with state-of-the-art tools., • Variety & Impact: Contribute to diverse projects with real-world significance across multiple industries. Check-Mate Industries is an equal opportunity employer committed to fostering a diverse and inclusive workplace for all employees. Powered by JazzHR vp1AWkcYmi

Job Description Precipart. located in Farmingdale, NY, is looking to hire skilled and experienced Machinists to set up and operate CNC machines in our state-of-the-art facility featuring versatile machining capabilities, including: Lathe, Swiss Turning, Milling, Grinding, and Gear Cutting. We're looking for career focused Machinists with experience in any of these machining areas to help us craft high-quality components that support our customers in the medical, aerospace, space and industrial markets. Our machinists are the makers of cutting-edge components that will impact the lives of many. At Precipart, we engineer possible. From the needle on the first Gramophone, to helping mankind explore Mars, to pioneering parts for robotic surgery, we’ve helped propel the human race forward for five generations. With our unique combination of engineering, design and manufacturing expertise, we’ve worked with our clients to turn possibilities into possible. Join us in driving human progress through engineering! • Our Machinist career growth path has four distinct tiers, from Entry Level, Class C, Class B, to Class A. Each tier is designed to build upon your skills and experience, providing targeted development and increasing responsibilities to help you achieve your professional goals., • Our renovated facilities is equipped with state of the art equipment and is temperature controlled providing a comfortable environment that is focused on quality, safety and 5S., • We offer two work shifts, 1st (7:00am to 3:30pm) and 2nd shift (3:00pm to 11:30pm which includes a 10% shift differential)., • Set up and run up to two machines to fabricate precision parts, • Load and unload parts in the machine, • Start the machining cycle, • Inspect dimensions of finished pieces, • Change tooling as needed, • Hold tight tolerance of +/- .0002, • Experience setting up and operating CNC machines to fabricate precision components. We welcome candidates of all experience levels to apply. The hiring class and compensation for this role will be determined through our assessment process, taking into account your skills, experience, and qualifications. Additionally, the final level will be based on the business needs at the time of hire., • Should demonstrate interest and aptitude in this line of work, • Relevant technical Associate degree or CNC Machining certificate is preferred for candidates with minimal work experience, • Experience fabricating precision parts, • Experience working to very close tolerances (+/- .0002), • Experience with reading blue prints for mechanical components, • Experience inspecting parts and using inspection tools, • Good aptitude for shop math, • Experience with changing live tooling, • Able to work in a fast paced environment and meet production schedule, • Maintain a clean, organized and safe work area, • Able to stand for duration of shift and lift up to 40lbs WHAT WE'LL OFFER YOU IN RETURN:- • Base salary plus incentive program, • Paid time off, • Employee Referral Bonus, • Medical, dental, vision insurance, • Flexible Spending Account, • Health Savings Plan, • Life insurance, enhanced short term and long-term disability insurance and other voluntary insurance plans, • 401k Profit sharing plan, • Tuition Assistance, • National Employee Assistance Program, • 529 College Savings Program, • Professional development and training, • Clean and organized workspace and manufacturing facilities, • Company events and outings Precipart engineers, designs and manufactures high precision custom solutions for the world’s leading companies in the Medical, Aerospace and Industrial markets. We act as a partner across your entire manufacturing process by engineering precision gears, mechanical components, assemblies and motion control solutions, as well as delivering end-to-end capabilities and more. With offices in Switzerland, the U.S. and U.K, we are here to help you “engineer possible”. You should be proficient in: • GD&T, • CNC Tooling, • Brake & Suspension Systems, • G-Code, • Machine Setups for Production Runs, • CNC Mill (3-4 axis VMC) (Fanuc, Mazak, Haas, Kitamura, Dmg Mori Seiki), • CNC Lathe (2-4 axis) (Mazak, Okuma, Doosan, Dmg Mori Seiki, Nakamura), • CNC Swiss Lathe (Star, Citizen, Tsugami, Tornos), • CNC Lathe (5+ axis) (Nakamura), • Gear Machinery (Fellows, Gleason) $20 - $46 / hr

Job Description All around machinist tool and die person needed. Milling and lathe work mostly. A good knowledge of most machines in a machine shop is helpful. This position is part of a team and will incorporate design to manufacture. Must be able to read from prints and do simple set ups. Have your own tools and be able to work independantly. Ability to sharpen drills and lathe tools if necessary. Good problem solving skills. Mechanically inclined Overtime is available. Company DescriptionLooking for any and all manufacturing people. Machinist , Tool & Die CNC and operators. Excellent opportunities.Looking for any and all manufacturing people. Machinist , Tool & Die CNC and operators. Excellent opportunities.

Job DescriptionDescription: JOB TITLE: Machinist Job Summary: We are seeking a skilled and experienced Machinist to join our team. The ideal candidate will have a minimum of 3 years of experience and be proficient in operating manual lathes, milling machines, and performing cylindrical grinding. This role requires a high level of precision and attention to detail to support our production and manufacturing operations. Key Responsibilities: · Operate and maintain manual lathes and milling machines to fabricate, modify, or repair parts and components. · Perform cylindrical grinding to achieve precise dimensions and surface finishes. · Interpret and work from technical drawings, blueprints, and specifications. · Measure and inspect parts using precision measuring tools to ensure adherence to required tolerances. · Perform routine maintenance on machining equipment. · Adhere to safety protocols and maintain a clean and organized work environment. · Collaborate with other team members to optimize workflow and ensure timely completion of projects. Qualifications: · Minimum of 3 years of hands-on experience as a machinist. · Proficiency in operating manual lathes and milling machines. · Demonstrated expertise in cylindrical grinding techniques. · Strong ability to read and interpret blueprints and technical drawings. · Familiarity with precision measuring instruments such as calipers, micrometers, and gauges. · Excellent problem-solving skills and attention to detail. · Ability to work independently and as part of a team. · Experience in a manufacturing or production environment. · Knowledge of machining a variety of materials, including metals and composites. Why Join U.S Dynamics Corporation? At U.S Dynamics Corporation, you will be a part of a supportive and innovative environment that fosters growth and values your professional development. We offer competitive compensation, comprehensive benefits, and opportunities for advancement. Join us in shaping the future with your talent and expertise. Requirements:

Job Description Johnson Service Group (JSG) is currently looking for a CNC Machinist with experience setting up and operating 2 to 4, multi-axis CNC lathes. This is a direct hire opportunity with a world leading manufacturer of mechanical components located in Hicksville NY. Under the direction of the shop manager, the machinist should be able to set up their machine with little to no intervention and execute the provided programs in a timely manner. Experience with Swiss-type lathes is a bonus, but not a requirement. Duties: • Set-up and run 2-4 multi-axis CNC lathes., • Must be able to inspect own work and make any off-set chances as required to ensure an acceptable first piece.Company DescriptionOur people and culture make JSG a great place to work. JSG’s mission is to empower people, help our clients reach their goals, and hire motivated individuals. Johnson Service Group, Inc. (JSG) is a North American leader in the staffing and consulting services industry, with 40 years of experience investing in people and companies. We are always looking for great people to join our team—we want to see your success here at JSG! We can be found locally in more than 30 offices throughout the United States and Canada. JSG continues to work diligently to offer our clients and candidates world-class service and diversified offerings to fit their evolving needs. We offer medical, dental, vision, life insurance options, 401(k), weekly pay, and more. Johnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law.Our people and culture make JSG a great place to work. JSG’s mission is to empower people, help our clients reach their goals, and hire motivated individuals.\r\n\r\nJohnson Service Group, Inc. (JSG) is a North American leader in the staffing and consulting services industry, with 40 years of experience investing in people and companies. We are always looking for great people to join our team—we want to see your success here at JSG! We can be found locally in more than 30 offices throughout the United States and Canada. JSG continues to work diligently to offer our clients and candidates world-class service and diversified offerings to fit their evolving needs.\r\n\r\nWe offer medical, dental, vision, life insurance options, 401(k), weekly pay, and more.\r\n\r\nJohnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law.

Job Description CNC Machinist – First Class Location: Farmingdale, NY Company: Superior Motion Controls Position Summary: Superior Motion Controls is seeking a First-Class CNC Machinist to join our precision-driven metal manufacturing team. This role is ideal for a seasoned professional who thrives in a fast-paced, quality-focused environment and brings deep expertise in the setup, operation, and optimization of CNC machining centers. Primary Responsibilities: • Set up, program, and operate vertical CNC machining centers to produce precision components per engineering specifications and drawings., • Read and interpret complex blueprints, GD&T specifications, and setup sheets with minimal supervision., • Perform first-piece inspections and make machine adjustments to ensure adherence to tight tolerances., • Select appropriate tools, fixtures, speeds, and feeds to optimize productivity and part quality., • Conduct routine maintenance and troubleshooting of equipment to ensure optimal machine performance., • Maintain documentation and records for production runs, tool usage, and machine setup parameters., • Collaborate with engineering, quality assurance, and production teams to improve machining processes and resolve technical challenges. Qualifications and Experience: • Minimum 10 years of continuous hands-on experience in a CNC machining environment, with demonstrated expertise in setup and operation., • Proficient in the use of precision measurement instruments including micrometers, calipers, height gauges, and dial indicators., • Strong understanding of metal material properties (e.g., aluminum, steel, inconel, tool steel) and cutting tool technology., • Demonstrated ability to work independently with minimal oversight while consistently delivering high-quality results., • Ability to sit/stand at a CNC workstation for extended periods., • Capability to lift up to 40 lbs as needed., • Must be physically able to navigate the warehouse and access inventory at various heights.

Job DescriptionDescription: JOB TITLE: Machinist/Programmer Job Summary: We are seeking a skilled Machinist/Programmer to join our team. The ideal candidate will have experience operating and programming CNC machines to produce precision parts. You will be responsible for reading blueprints, setting up machines, programming CNC controls and inspecting parts to ensure they meet specifications. Perform the activities of an expert level CNC programmer and shop leader to machine, program, estimate, and coordinate various products per established facility processes, including set-up, fabrication, and inspection using the operations of CNC mills, lathes, and other equipment. Perform as a key contributor for the new knowledge of programs and projects. Apply knowledge of policies, procedures, and the practical application of general and specific technical aspects of the job to complete varied and complex work. Make recommendations for new procedures. Work independently in established procedures and practices. Lead tasks and mentor others. Due to the nature of work performed within this facility, U.S. citizenship is required. Key Responsibilities: · Program set up, and operate CNC machines (lathes, mills, or grinders) to produce parts according to specifications. · Interpret blueprints, engineering drawings, and CAD models to develop and modify CNC programs. · Select and install appropriate tools, fixtures, and materials for each job. · Perform machine maintenance and troubleshooting to ensure optimal performance. · Inspect finished parts using precision measuring instruments to verify conformance to specifications. · Collaborate with engineering and production teams to optimize machining processes and improve efficiency. · Maintain a clean and safe work environment, adhering to company safety policies and procedures. · Continuously monitor machine operations to detect malfunctions or deviations from specifications. Required Qualifications: · High school diploma or equivalent; technical degree or certification in machining, CNC programming, or a related field is preferred. · Proven experience as a Machinist/Programmer, with a strong background in CNC programming and machine operation. · Proficiency in reading and interpreting blueprints, technical drawings, and CAD models. · Experience with various CNC controls (e.g., Fanuc, Haas, Siemens). · Strong knowledge of machining principles, materials, and cutting tools. · Excellent problem-solving skills and attention to detail. · Ability to work independently and as part of a team in a fast-paced environment. · Good communication skills and a commitment to quality and safety. · Ability to lift and carry up to 30lbs. · Comfortable working in a manufacturing environment with exposure to noise, dust and other industrial elements. · 10 years of experience with programming in computer-aided manufacturing (CAM) software and machining and fabrication principles · 10 years of experience with CNC and manual machinery operations · 5 years of experience with using Mastercam and programing and executing 4th and 5th axis machining operations · 3+ years of experience with estimating CNC machining work and jobs · Ability to review engineering drawings for completeness and interpret geometric dimensioning and tolerancing (GD&T) · Ability to inspect and verify all products by using standard inspection equipment and techniques/CMM (Coordinate Measuring Machine) · Ability to set up and operate manual machine shop equipment, including lathes, milling machines, saws, and power tools · Ability to pay strict attention to detail in a manufacturing environment Why Join U.S Dynamics Corporation? At U.S Dynamics Corporation, you will be a part of a supportive and innovative environment that fosters growth and values your professional development. We offer competitive compensation, comprehensive benefits, and opportunities for advancement. Join us in shaping the future with your talent and expertise. Requirements:

CNC MACHINIST Under minimal supervision, the Machinist is responsible for manufacturing medium to high complexity parts to required specifications using computer numerically controlled (CNC) machine centers. As a Machinist, you will be integral to the manufacturing process, ensuring high-quality production through precise machining techniques. Reporting to the Manufacturing Supervisor, you will utilize your core skills in blueprint reading and mechanical knowledge to operate CNC lathes and precision measuring instruments effectively. Your premium skills in CNC programming and GD&T will enhance your ability to meet stringent quality control standards. Additionally, your relevant experience in fabrication and tooling will support our commitment to excellence in a fast-paced manufacturing facility. ESSENTIAL RESPONSIBILITIES: · Record setup and/or run direct labor time on assigned work. · Retrieve, download and upload machine program and setup information. · Review drawing or specification to verify method or sequence of operations. · Setup machine tool. · Layout parts to display locations of bank points or machined cuts. · Mount, align, adjust, load and secure materials, tools and attachments to machine. · Operate and run one or more machines concurrently. · Monitor the feed and speed of machine. · Detect malfunction in machine operation. · Deburr parts using approved deburring techniques. · Clean parts. · Inspect parts using calibrated precision measuring instruments and gauges. · Adjust machine control parameters to correct malfunction or out of tolerance condition. · Report nonconforming material or questionable conditions. · Assure paperwork integrity of production documentation. · Move parts to next operation. · Maintain an organized and clean work area. · Clean and preserve machines and tooling. · Other Duties as required - full job description will be provided QUALIFICATIONS: • High School Diploma or graduation from certified technical school, and 5+ years of machining experience., • This position requires the ability to understand and communicate job-related information in English, both verbally and in writing, to ensure safety and effective performance of essential duties., • Proficient in blueprint reading and mechanical knowledge, • Experience with precision measuring instruments including calipers and micrometers, • Strong background in manufacturing and machining processes, • Familiarity with CNC lathe operations and CNC programming, • Knowledge of GD&T and CAM programming is a plus, • Basic math skills and experience in quality control practices, • Ability to work in a factory or manufacturing facility environment ENVIRONMENTAL CONDITIONS & PHYSICAL REQUIREMENTS: • Routinely perform duties in a production environment., • Exposure to production level noise., • Required to stand for long periods of time., • Near visual acuity to read and hearing ability to monitor equipment sounds., • Must be able to lift a minimum of 20 lbs. Why You Will Love Working Here: • Competitive Salary: Attractive compensation based on your experience and skills paid weekly, and eligibility to receive an annual bonus, • Comprehensive Health Coverage: COMPANY PAID Medical and Vision plans, and voluntary dental plans to keep you and your family healthy., • Generous Paid Time Off (PTO): vacation days, holidays, and sick leave to recharge., • Work-Life Balance: Enjoy a healthy balance with flexible work hours, a 4/10 work schedule!, • Retirement Planning: 401(k) with company match to help secure your future., • Professional Development: Access to ongoing learning opportunities, certifications, and career growth programs., • Collaborative Work Culture: Be part of a supportive, diverse, and innovative team., • Wellness Program: Mental health resources, and wellness incentives., • Parental Leave: Paid maternity and paternity leave to support your growing family., • Employee Recognition: Regular awards and incentives for outstanding performance., • Fun Team Events: Company outings, celebrations, and team-building activities.

Aerotek - JobID: JP-005530696 [Production Operator / Machinist] As a Machine Operator at Aerotek, you'll: Operate equipment and/or second-operation machines through various tasks ; Perform inspecting, trimming, testing, fixturing, assembling, and packaging products; Perform other duties as assigned

CNC Machinist 3rd Class 2nd Shift.We are looking for a CNC Machinist to join our Target Rock team!.As our CNC Machinist, you will be responsible for the operation of CNC machine tools within a given manufacturing department.You will perform these activities in compliance with Company procedures and

We are looking for a Machinist B for our Westbury NY facility. In this role under limited supervision, you will perform intricate manufacturing parts using manual and computerized machining operations to fabricate parts and components for a wide variety of systems. \n \n We offer: \n \n Aside from a dynamic global culture and leading market position, we are proud to offer our employees development opportunities, competitive salary and a robust benefit program ALL available on first day of employment! \n \n The perks and benefits of working at Oerlikon include the following: \n \n\n • Comprehensive medical and prescription drug plan with low premiums, company sponsored HSA contributions and without cumbersome waiting periods to keep you going strong. \n, • Excellent Dental and Vision coverage.\n, • Employee Assistance, Financial and Wellness programs to help improve all aspects of your life journey. \n, • 401(k) retirement savings plan with significant company match and financial planning and education options to help you achieve your retirement goals \n, • Tuition reimbursement and internal education resources to satisfy your love of learning so you can continue to grow with us!\n, • Generous paid time off to support your physical and mental wellbeing.\n, • 12 paid company holidays to occasionally extend your weekends or time off. \n, • Flexible hours or remote work environment available for certain positions\n, • 100% company paid life insurance and disability insurance\n, • Employee Referral Bonus program because why not to bring your friends to work everyday!\n\n \n \n Your Responsibilities: \n\n • Work from blueprints and verbal instructions to lay out sequential details of standard machining operations and prototypes assembly set ups for a variety of machine parts.\n, • Set up and operate more than one machine tools; such as CNC, millers, grinders, sheet metal equipment and hand tools for machining components.\n, • Use all machine shop measuring and gauging devices to align and/or machine metal, or plastic parts to meet required specifications.\n, • May train and provide technical direction to other machinists.\n, • Operate and maintenance machine in optimal operation following maintenance schedule ( TPM).\n, • Keeps tools and work area in a safe, clean and orderly manner.(5 S routines)\n, • Participate and collaborate in process improvement initiatives.\n, • Participate and collaborate in root cause corrective actions (RCCA) on machine operation.\n, • Use all prescribed personal protection equipment (PPE) where deemed necessary; Follow established environmental, health and safety policies, procedures and work instructions associated with assigned duties and work location\n, • Study or knowledge equivalent to high school or technical school, plus two years apprenticeship training and 3 to 7 years diversified machining experience.\n, • Must have the ability to use handbook formulas and advanced shop mathematics.\n

CNC Machinist 3rd Class - 2nd Shift We are looking for a CNC Machinist to join our Target Rock team! As our CNC Machinist, you will be responsible for the operation of CNC machine tools within a given manufacturing department. You will perform these activities in compliance with Company procedures and quality requirements. Additionally, you will be able to check own production parts to maintain manufacturing processes and make offset adjustments as required working with supervision. Location: East Farmingdale, NY Hours: 5:30pm to 2:30am hourly rate: $29.54 Please note that the salary range information provided is a general guideline only, reflecting a position based in New York. Criteria such as the candidate's qualifications and relevant experience, the scope of the specific position, as well as market and business considerations will be evaluated when extending an offer. We Take Care of Our People Paid Time Off I 401K with Employer Match and Profit Sharing I Health and Wellness Benefits I Learning and Development Opportunities I Referral Program I Competitive Pay I Recognition I Employee Stock Purchase Plan I Inclusive & Supportive Culture * Your Challenge \n • Ability to operate machines within a given manufacturing department.\n, • Set-up machines for simple manufacturing operations.\n, • Responsible to maintain quality and productivity standards.\n, • Basic blueprint reading.\n, • Ability to use inspection equipment and inspect own work.\n, • Must be a US citizen\n, • High School Graduate or equivalent, shop mathematics and Trigonometry Skills.\n, • Two (2) years of manufacturing or related experience.\n, • General good housekeeping practices within work area.\n, • Maintain correct time reporting and accurate entries on applicable manufacturing documentation.\n, • Comply with Company quality and safety requirements.\n Our Values Environmental, Social and Governance Founded in 1951 to meet the special severe service valve requirements of the United States Nuclear Navy, Target Rock is today the premier supplier of highly engineered, valves and related products to both the U.S. Navy nuclear fleet and the global nuclear power generation industry. The first Target Rock valves were installed on the U.S.S. Nautilus, the U.S. Navy's first nuclear powered submarine. To learn more, please visit us at Curtiss-Wright EMS - Target Rock (cw-ems.com) *Please note, benefits are country specific and may vary from location to location. #LI-CM1 No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Resumes submitted directly to any Curtiss-Wright employee or affiliate will not qualify for fee payment, and therefore become the property of Curtiss-Wright. Compliance Statement This position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn. Curtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition. For US Applicants: EEO is The Law - click here for more information. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

As a Machinist Trainee, you will be responsible for working within the framework of a team and performing the following activities: Learn the required skills to work within the Pilot Metals Development team Follow safety rules, manufacturing instructions, work rules and other manufacturing guideline

As a Machinist Trainee, you will be responsible for working within the framework of a team and performing the following activities: Learn the required skills to work within the Pilot Metals Development team Follow safety rules, manufacturing instructions, work rules and other manufacturing guideline

Under minimal supervision, the Machinist is responsible for manufacturing medium to high complexity parts to required specifications using computer numerically controlled (CNC) machine centers. As a Machinist, you will be integral to the manufacturing process, ensuring high-quality production throug

Machinist Job Duties: Review samples, drawings or instructions to understand specifications of output Take measurements and mark material for cutting or shaping Plan the sequence of nece

A client of Innova Solutions is immediately hiring for a Machine Operator.Position type: Full Time, Contract Duration: 5 months to possible extension Location: North Kingstown, RI Shift: Monday-Friday (2nd Shift) As a Machine Operator you will: Must be able to work in a high-paced environment Operat

Located 30 miles south of Albany, New Athens Generating stands as a formidable energy hub in the town of Athens, NY.Boasting a capacity of 1,080 megawatts, it operates three Siemens 501G combustion turbine generators fueled by natural gas combined-cycle technology, ensuring efficient and reliable po

CNY Feeds, a family-owned feed mill located in Jordan, NY is seeking a self-motivated individual to fill the full-time position as a Feed Production Operator (Swing Shift).We have been in business for 30 years, primarily serving regional dairy farms, and have a fantastic team of hard-working and com

AdaptHealth Opportunity Apply Today!.At AdaptHealth we offer full-service home medical equipment products and services to empower patients to live their best lives out of the hospital and in their homes.We are actively recruiting in your area.If you are passionate about making a profound impact on

CNY Feeds, a family-owned feed mill located in Jordan, NY is seeking a self-motivated individual to fill the full-time position as a Feed Production Operator (Night Shift).We have been in business for 30 years, primarily serving regional dairy farms, and have a fantastic team of hard-working and com

AdaptHealth Opportunity Apply Today!.At AdaptHealth we offer full-service home medical equipment products and services to empower patients to live their best lives out of the hospital and in their homes.We are actively recruiting in your area.If you are passionate about making a profound impact on

IHOP Dish Machine Operators (DMO) will be responsible for cleaning and maintaining dishware/utensils for the continued smooth operation of the restaurant.IHOP DMOs will also perform assigned sanitation and housekeeping tasks.DMO must have good communication skills and work well with others.This posi

AdaptHealth Opportunity Apply Today!.At AdaptHealth we offer full-service home medical equipment products and services to empower patients to live their best lives out of the hospital and in their homes.We are actively recruiting in your area.If you are passionate about making a profound impact on

Mechanic A (Painter General Maintenance).New York Institute of Technology's six schools and colleges offer undergraduate, graduate, and professional degree programs in in-demand disciplines including computer science, data science, and cybersecurity; biology, health professions, and medicine; archit

AdaptHealth Opportunity Apply Today!.At AdaptHealth we offer full-service home medical equipment products and services to empower patients to live their best lives out of the hospital and in their homes.We are actively recruiting in your area.If you are passionate about making a profound impact on

We’re looking for a Costco Forklift Operator to operate forklifts to move pallets, load trucks, and support warehouse operations.Interact with customers and colleagues in a professional manner.Work closely with your team to maintain high performance and efficiency.Perks include competitive pay, fl

AdaptHealth Opportunity Apply Today!.At AdaptHealth we offer full-service home medical equipment products and services to empower patients to live their best lives out of the hospital and in their homes.We are actively recruiting in your area.If you are passionate about making a profound impact on

Welder Job Duties: Interpret blueprints, drawings, and measurements to plan layouts.Weld small and large components such as copper plumbing, beams, and pipelines.Use specialized mac

The primary responsibility of this position is to transport assigned operational components, supplies and materials to requesting departments as well as transport full pallets of finished goods to storage and staging areas, loading and unloading trailer for delivery with a power and pallet jacks in

Successful candidates will possess the following qualifications: 2-3 years' experience as a Material Handler.Forklift experience is required Experience in safely loading/unloading materials onto trailers and trucks.Requires frequent heavy lifting up to 75 pounds.Able to handle a very fast paced wor

Expertly welds small, medium, and large bore pipe of various metals and alloys.Solders and brazes of copper pipe.Performs complex mechanical installations per engineering direction.Reads and comprehends construction drawings and specifications.Lays out and installs piping, equipment, and other mecha

Forklift Operator/Sorter will be responsible for all of the day to day functions, including but not limited to: Manually sort and bale trash, plastic, Styrofoam, wood and cardboard.Prepare recycle materials for transport by palletize, wrapping, and loading.Prepare shipment loads and move recycle co

Forklift Operator/Sorter will be responsible for all of the day to day functions, including but not limited to: Manually sort and bale trash, plastic, Styrofoam, wood and cardboard.Prepare recycle materials for transport by palletize, wrapping, and loading.Prepare shipment loads and move recycle co

New York Institute of Technology's six schools and colleges offer undergraduate, graduate, and professional degree programs in in-demand disciplines including computer science, data science, and cybersecurity; biology, health professions, and medicine; architecture and design; engineering; IT and di

We’re looking for a Costco Forklift Operator to perform responsibilities as a Forklift Operator.Stay adaptable to changing priorities and business needs.Stay adaptable to changing priorities and business needs.Perks include competitive pay, flexible scheduling, training opportunities, a supportive

CNY Feeds, a family-owned feed mill located in Jordan, NY is seeking a self-motivated individual to fill the full-time position as a Feed Production Operator (Swing Shift).We have been in business for 30 years, primarily serving regional dairy farms, and have a fantastic team of hard-working and com

Forklift Operator/Sorter will be responsible for all of the day to day functions, including but not limited to: Manually sort and bale trash, plastic, Styrofoam, wood and cardboard.Prepare recycle materials for transport by palletize, wrapping, and loading.Prepare shipment loads and move recycle co

Maintenance Mechanic - Multiple shifts available.If you would love to be part of a company that is poised for substantial growth with opportunities for advancement, then working for CPP and its subsidiaries may be the right fit for you! We are an investment casting foundry for the aerospace and defe

As a Forklift Operator, you will be responsible for operating forklifts and supporting warehouse tasks, including: operate forklifts and other warehouse equipment safely.Duties and responsibilities can change depending on business needs.

Mechanic A (Painter General Maintenance).New York Institute of Technology's six schools and colleges offer undergraduate, graduate, and professional degree programs in in-demand disciplines including computer science, data science, and cybersecurity; biology, health professions, and medicine; archit

We’re seeking a motivated Forklift Operator, where you will coordinate with other departments when needed, work with supervisors to meet daily goals, and respond to questions by phone, email, or in-person.Additional duties include assist with packaging, labeling, and preparing items for delivery,

Mechanic A (HVAC General Maintenance).New York Institute of Technology's six schools and colleges offer undergraduate, graduate, and professional degree programs in in-demand disciplines including computer science, data science, and cybersecurity; biology, health professions, and medicine; architect

Forklift Operator/Sorter will be responsible for all of the day to day functions, including but not limited to: Manually sort and bale trash, plastic, Styrofoam, wood and cardboard.Prepare recycle materials for transport by palletize, wrapping, and loading.Prepare shipment loads and move recycle co

Mechanic A (Plumbing General Maintenance).New York Institute of Technology's six schools and colleges offer undergraduate, graduate, and professional degree programs in in-demand disciplines including computer science, data science, and cybersecurity; biology, health professions, and medicine; archi

Welder Job Duties: Expertly welds small, medium, and large bore pipe of various metals and alloys.Solders and brazes of copper pipe.Performs complex mechanical installations