Machinist jobs in Rochester, New YorkCreate job alerts

Job Description Job Summary: Working from given instructions, will load programs into the controller, review the program and do intermediate setup of machine tools through first piece inspection approval. Essential Duties and Responsibilities: • Accountable for manufacturing complex parts and machine maintenance., • Able to control product quality during production runs using calipers, dial bore gages, micrometers, etc., • Measure and work with tight tolerance in accordance with control plan and blueprint., • Good working knowledge of proper machine operation and safety., • Manufacture product with tight tolerance in accordance with CAD models and blueprints., • May work with prototypes for potential future work., • Must be able to develop and machine basic fixtures with or without prints., • Keeps work area clean and organized., • Must be able to change tools and offsets. Additional Responsibilities: • When requested, may work on special projects and various related assignments., • May be required to edit programs at machine., • May be requested to instruct other personnel on the machine operation., • May be required to work in various areas of operations when necessary., • Performs other related duties and assignments as required. Physical Demands and Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. Must be able to stand for long periods of time. The employee is occasionally required to reach with hands and arms. The employee is required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 50 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from moderate to loud. Education, Skills and Experience: • Minimum of 5 years experience in a machine shop environment., • Knowledgeable on set-ups, lathes and mills., • Understand GD&T and shop math., • Ability to read and understand cad-cam software., • Familiar with G and M codes., • Good communication skills., • Must be a good team player. This job description in no way states or implies that these are the only duties to be performed by this employee. He/she will be required to follow any other instructions and to perform any other responsible duties as requested by his/her supervisor. Syntec Optics is an Equal Opportunity/Affirmative Action Employer. Applicants are free to apply without regard to race, color, religion, sex/gender, gender identity, sexual orientation, marital status, pregnancy, genetic information, citizenship status, national origin, age, disability or veteran status or any other Federal or State legally protected classes. Read our EOE Policy Statement.

Job Description Sydor Optics, Inc. is a Rochester based manufacturing company fabricating flat-surfaced, precision optics for over 50 years. Our manufacturing facility is in Chili, NY just west of the Rochester International Airport. Our Sales Team works closely with customers to assist them with custom requests for a variety of markets ranging from entertainment, semiconductor, medical, military and more. Please view our company video for more information about Sydor Optics at www.sydor.com. Position Description The CNC Machinist/Set-Up Person is responsible for set-up and operation of HAAS and Fanuc CNC mills. Qualifications: Education/Certifications: High School Diploma or equivalent. Skills, Knowledge, and Experience: • Prior experience as a CNC Machinist/CNC Machine Set-up person., • Ability to work in a team environment., • Experience with HAAS Machines/Fanuc Robodrill, a plus., • Optical experience, a plus Essential Functions • Set-up and operate HAAS and Fanuc CNC mills/Techno Router., • Review and interpret blueprints (GDT preferred)., • Run a manual mill and lathe for fixturing/engineering support., • Handling, waxing, fixturing, machining and cleaning glass materials., • Monitor machines/parts adjusting offsets as determined by programmers., • Perform measurements and conduct quality checks on in-process/completed parts., • Use Calipers, Micrometers, Vision System, etc. to verify work., • Perform routine machine/coolant maintenance., • Maintain cleanliness of area/tools., • Participate in 5S and lean manufacturing practices., • Perform other duties as needed and assigned. Job Posted by ApplicantPro

Job DescriptionDescription: Summary: The CNC Machinist is responsible for the safe operation and set up of a wide variety of Computerized Numerical Control Machining Centers (CNC) or other production machines using programs and tooling that have been previously used to manufacture a product and is capable of doing this with little supervision. • Must work with Management to debug and optimize manufacturing processes for jobs or machines which they are responsible., • Must demonstrate a very high level of competency with all types of metal working equipment, both manual and CNC., • Must demonstrate the ability to debug machining processes and communicate those processes for manufacturing., • Must be able to diagnose process problems and determine the cause of the problem., • Must be able to implement corrective action to prevent reoccurrence of problems., • Must be aware of the budget and delivery requirements for work assigned to them and report to management any difficulties that would cause the cost of the work to exceed budget or miss a scheduled delivery., • Must have a thorough understanding of safe operation of metal working equipment, including but not limited to starting and stopping the machining cycle, interrupting the machine cycle, performing offsets to tool length and diameter and restarting the machining cycle., • Must have a thorough knowledge of CNC program code and be able to document and perform edits of the code to enhance machining processes., • Installs machining fixtures and tooling using Tool Sheet and Setup instructions with no supervision., • Orients fixtures and tools to machine coordinate systems, inputs machine, fixture and tool offsets., • Loads appropriate CNC program into machine control., • Loads material into holding fixtures, following verbal and/or written instructions., • Produces “first piece” from setup while observing machining cycle to prevent damage to work piece, tooling, machine or injury to operator., • Must be able to read, understand and interpret blueprints and specifications, including GD&T., • Observes and listens to machine operation to detect malfunctions, such as worn or damaged cutting tools., • Performs a variety of inspection and gaging operations to insure maintenance of quality standards and specifications and have the ability to record the results of these inspections., • Notifies supervisor of discrepancies., • Must be able to train CNC Operators in the safe operation of the machines that they have set up., • Cleans machine, tooling, and parts as instructed., • Performs daily preventative machine maintenance as instructed., • Other duties as assigned. Requirements: Education • High school diploma or general education degree (GED) required., • 5+ years related experience and/or training; or equivalent combination of education and experience required. Skills: • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals, mechanical drawings and specifications., • Ability to write routine reports and correspondence., • Ability to speak effectively before groups of customers or employees., • Ability to add and subtract four-digit numbers and to multiply and divide., • Ability to perform these operations using units of measurement, volume, and distance. Basic understanding of Geometry and Trigonometry., • Ability to apply common sense understanding to carry out complex instructions furnished in written, oral, or diagram form., • Ability to deal with problems involving several variables in situations requiring a high level of judgment and reasoning., • Microsoft Office Suite, • Epicor Vista™ integrated manufacturing and accounting solution, • Adobe Acrobat, • Windows Operating Systems, • Internet Explorer or equivalent, • Must be able to read, understand and interpret mechanical drawings., • Working knowledge of “G” & “M” Codes is required., • Demonstrate a working understanding of CNC Machine Coordinate Systems., • Demonstrate competency on a wide variety of machines and controls.

Job DescriptionCNC Machinist – West Henrietta, NY Hours: Mon–Fri | 7:00 AM – 3:30 PM Pay: $23.00 – $34.00/hour (depending on experience) + bonus Overview We’re looking for an experienced CNC Machinist with strong Swiss lathe expertise to handle both prototype and production work. You’ll program and run Tsugami Swiss Lathes, CNC lathes, and mills—owning jobs from setup through completion. What You’ll Do • Program and operate Tsugami Swiss Lathes, CNC mills, and lathes, • Machine precision parts to tight tolerances (< 0.0001”), • Read blueprints and determine tooling, speeds, and setups, • Handle prototype work with minimal supervision, • Inspect parts and maintain quality standards, • Support process improvements and train others as needed What You Bring • 5+ years Swiss lathe machining experience (Tsugami preferred), • 2+ years CNC programming (Mastercam, PartMaker), • Strong blueprint reading and advanced math skills, • Experience with tight-tolerance machining and prototype work, • Detail-oriented, self-driven, and safety-focused Be part of a team focused on precision, innovation, and meaningful impact—where your skills make a difference every day. Apply now for immediate consideration for this Machinist role in West Henrietta, NY. We look forward to connecting with you! As part of our promise to talent, Kelly supports those who work with us through a variety of benefits, perks, and work-related resources. Kelly offers eligible employees voluntary benefit plans including medical, dental, vision, telemedicine, term life, whole life, accident insurance, critical illness, a legal plan, and short-term disability. As a Kelly employee, you will have access to a retirement savings plan, service bonus and holiday pay plans (earn up to eight paid holidays per benefit year), and a transit spending account. In addition, employees are entitled to earn paid sick leave under the applicable state or local plan. Click here for more information on benefits and perks that may be available to you as a member of the Kelly Talent Community. Get a complete career fit with Kelly®. You’re looking to keep your career moving onward and upward, and we’re here to help you do just that. Our staffing experts connect you with top companies for opportunities where you can learn, grow, and thrive. Jobs that fit your skills and experience, and most importantly, fit right on your path of where you want to go in your career. About Kelly Work changes everything. And at Kelly, we’re obsessed with where it can take you. To us, it’s about more than simply accepting your next job opportunity. It’s the fuel that powers every next step of your life. It’s the ripple effect that changes and improves everything for your family, your community, and the world. Which is why, here at Kelly, we are dedicated to providing you with limitless opportunities to enrich your life-just ask the 300,000 people we employ each year. Kelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California’s state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S.

Job Description CNC Machinists & EDM Operators - Multiple Openings (A, B & C Shifts) Location: Brinkman Products, Inc. (Davenport & CJ Winter Divisions) Job Type: Full-Time Shifts: A, B & C Pay: $25.00 to $40.00/hr. based on job level & experience About Us Brinkman Products, Inc. is an industrial goods manufacturing company encompassing two lines of business; Davenport Machine and CJ Winter. Both manufacture proprietary product lines which include Davenport multi-spindle screw machines, thread rolling attachments, thread rolls, and tooling. We are a financially strong, growing manufacturing company seeking experienced professionals to join our team. We are currently hiring for multiple roles in a clean, well-equipped shop environment. Open Positions: • CNC Mill Setup & Run Machinist, • CNC Lathe Setup & Run Machinist, • EDM Wire Operators, • Hone Operators Shift Options: • Flexible A, B & C shifts available, • 20% shift differential for applicable shifts, • Weekend A shift 3 day workweek Friday - Sunday 12 hour workdays get paid for 40 hours Responsibilities: • Set up and operate CNC mills and/or lathes to produce precision parts, • Read and interpret blueprints and technical drawings, • Perform in-process inspections using measuring tools, • Maintain quality and efficiency standards, • EDM/Hone operators: set up and run equipment to meet tight tolerances Qualifications: • Prior CNC machining and setup experience required, • Ability to read blueprints and use precision measuring instruments, • Strong attention to detail and quality, • EDM or honing experience preferred (for applicable roles) Benefits: • Industry-leading medical coverage, • Dental and vision insurance, • Generous employer-funded HSA, • 401(k) with company match, • 10 Paid holidays, • Paid time off, • Stable company with long-term growth opportunities Why Brinkman Products? We offer a supportive work environment, modern equipment, and real career advancement opportunities. Join a team that values skill, precision, and growth. EOE, including disability/vets. Job Posted by ApplicantPro

Job Description The CNC Set-Up Machinist is responsible for programming, setting up, and machining complete parts from detailed technical drawings using the most efficient processes and equipment available. This role requires strong technical expertise, independent problem-solving ability, and ownership of the machining process from print to finished part. This is a higher-skill role within the CNC Turning department and requires hands-on experience with program edits, setups, and process optimization. Compensation • $30 - $34 / hr Shift: • 1st Shift: 7:30 AM – 4:00 PM, • 2nd Shift: 3:45 PM – 12:30 AM (+10% shift differential), • Overtime: Available (including Saturdays) Responsibilities • Program and edit CNC lathe programs as needed, • Perform full machine setups including tooling selection and workholding, • Load parts, operate controls, and verify first-piece quality, • Read and interpret detailed blueprints and customer specifications, • Perform in-process inspections using precision measuring instruments, • Optimize machining processes for efficiency and quality, • Support engineers and customers during design and production stages, • Coach and assist operators when needed, • Maintain strict adherence to quality and safety standards, • Work independently with minimal supervision Requirements Qualifications • Minimum 3+ years CNC setup and programming experience (Turning / Lathe required), • Strong blueprint reading and shop math skills, • Proficient with measurement instruments (micrometers, calipers, indicators, etc.), • Thorough understanding of machining theory and shop procedures, • Ability to troubleshoot and solve problems independently, • High school diploma or equivalent preferred Benefits Benefits • Medical, dental, and vision insurance, • 401(k), • Paid time off and paid holidays, • Stable, full-time employment

Job Description CNC Swiss Turning Machinist - A & B Shifts Location: Brinkman Precision Inc./West Henrietta, NY Job Type: Full-Time Shift: A & B Shifts Pay: $20.00 to $35.00/hr. based on experience Benefits: Health, Dental, Vision, 401(k), PTO, Paid Holidays, and more About Us: At Brinkman Precision, Inc., we specialize in high-precision machining for industries such as aerospace, medical, defense, and industrial manufacturing. With a reputation for quality and innovation, we are committed to delivering exceptional parts and service to our clients. We are currently seeking an experienced CNC Swiss Turning Machinist to join our growing team. Job Responsibilities: Primary responsibilities include setup, operation, and some troubleshooting of the machines. Prior programming experience is not required but is a plus. Qualifications: Experience on Citizen Swiss machines is mandatory (we currently have A20, L20, and M32 machines in our facility). Print reading and measuring techniques are required skills. This person must be able to communicate, train, and work in a team environment. Candidate needs to be a self-motivator and able to work with minimal supervision. Brinkman Precision, Inc. offers competitive wages and excellent benefits including: • Paid Time Off, • 401 (k) Matching, • Medical, • Dental, • Short Term Disability, • Long Term Disability, • Life Insurance, • And more! Please submit your resume with past experience listed for consideration and we appreciate your interest in our company! EOE, including disability/vets. Job Posted by ApplicantPro

Job Description CNC MACHINIST - B-SHIFT Advantech Industries, Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. We are currently seeking an individual to collaborate with us as a CNC Machinist on our B-Shift. Hours are Monday – Thursday, 3:45pm – 2:15am. The CNC Machinist - B-Shift is responsible for the set up and observation of machines to verify the accuracy of the machine settings and to detect malfunctions or out-of-tolerance machining, by using precision measuring instruments such as micrometers and calipers. Additionally, the CNC Machinist - B-Shift is responsible for the setup and controlled operation of computerized deburring and tooling machines to perform a variety of machining operations, which include drilling, chamfering, and deburring. DUTIES & RESPONSIBILITIES • Sets up machine and observes machine operation to verify accuracy of machine settings and to detect malfunctions or out-of-tolerance machining, using precision measuring instruments such as micrometer and caliper. Experience working with Mazak and Haas CNC machines is preferred, • Sets up and controls operation of computerized deburring and tooling machine to perform series of machining operations, such as drilling, chamfering, and deburring., • Inspects "first part", and inspects work pieces throughout the production run for out-of-tolerance machining., • Clean machine and work area., • Provide aid and guidance to machine operators with less experience or skill. SKILLS & QUALIFICATIONS • With limited supervision and quality work ethic, functions as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved, • Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes, • Maintains adequate levels of performance and motivation despite job tasks that are routine, repetitive, and/or non-stimulating, • Ability to understand and carry out oral and written directives, • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible, • Thorough operational knowledge and skills of specific CNC mills and CNC lathes to be operated with the ability to calculate and set machine controls either manually or by entering commands, • Ability to operate assigned equipment safely and efficiently, • Ability to keep record of time spent and material used, • Ability to use precision measuring tools and equipment, read drawings and blueprints, and be familiar with common machine and measuring tools, including micrometers and calipers, • Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals, • A HS Diploma or GED, • 5 years of previous CNC setup and operation experience, • Experience on Mazak or Haas Machines preferred, • Alignment with the requirements and principles of the Advantech Quality Management System and ISO 9001: 2015, • Capacity to handle changes in business operations and adjust to new situations, • Preparedness to stand for extended periods, life heavy items, and operate equipment JOB BENEFITS • Vacation, • Paid Sick Leave, • Holidays, • Health, • Dental, • Vision, • Life Insurance, • Voluntary Disability Insurance, • 401(k) Plan with Company Match According to the New York Pay Transparency law, pay range for this job is $23.00 - $37.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources. Monday through Thursday 3:45 pm to 2:15 am Full time employment (39.75 hours per week)

Job DescriptionPEKO Precision Products: We Make Products That Matter PEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: CNC Machinist Your Role: The CNC Machinist is responsible for the setup and operation of a variety of CNC machines, including horizontal and vertical mills. You will set up, operate, and manufacture products according to blueprint specifications and customer requirements. Responsibilities Included • Setup and operate various CNC mill machines, adhering to the blueprint specifications, • Conduct first piece inspection to ensure the part is free of defects and ready for the next stage of production., • Comply with all aspects of 5S, • Assist with other duties as assigned by the Manager.Reports To: Machining Manager Qualifications Basic Qualifications: • Minimum education level of High School, GED, or its equivalent, • 3+ years experience in a machine shop environment, • 3+ years experience working with mill machines Preferred Qualifications:, • Associates in Precision Machining, • Experience with multi-axis CNC milling with FANUC controls, MAZAK, or similar, • Experience in horizontal mill machinesWork Authorization: US Persons PEKO Perks:, • Competitive Total Rewards, • Tuition Reimbursement (IRS Allowable pre-tax Max), • 401K, Medical, Dental, Vision, • Flexible Spending & Health Savings Accounts, • Life, Short and Long-Term Disability, • Recognition Awards & Discretionary BenefitsOur Core Values:, • Compassion: We care about our talented and loyal PEKO family., • Safety: We are committed to providing a safe, clean, and positive workplace., • Integrity: We believe in transparency, honesty, and respect for all stakeholders., • Agility: We are dedicated to maintaining an agile and financially prudent organization., • Endurance: We foster the belief that PEKO people are resilient problem-solvers impacting the future., • Get a glimpse of why we are #PEKOProud: #PEKOProud - YouTubeOther:, • This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice., • For more available opportunities at PEKO, please visit our website:Jobs & Career Opportunities | Rochester NY | PEKO Precision Products A reasonable estimate of the compensation range for this position is $20.00 - $32.00 per hour. The wage range for this role considers a wide range of factors when making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational requirements. PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. Powered by JazzHR BzLCMX8FIp

Job DescriptionDescription: Join a Leader in Sustainable Packaging Innovation! At Arena Products, innovation isn’t just what we do, it’s who we are. As trailblazers in reusable transport packaging, we are redefining the supply chain while driving sustainability. We are a family-owned business with big impact, serving industries from dairy and produce to health and beauty. We are seeking a detail-oriented Machinist to design, build, and maintain the tooling and equipment that supports our production operations. You will fabricate prototypes to prove out designs and provide hands-on technical support to both Engineering and Manufacturing departments. Essential Job Functions • Precision Machining: Machine parts to specifications using lathes, milling machines, shapers, or grinders., • Setup & Operation: Adjust and operate specialized machine tools for precision operations., • Prototyping: Create and assemble test models to prove manufacturability; suggest design improvements or alternatives., • Quality Control: Measure and test completed units to ensure conformance to specifications and detect defects., • Maintenance: Perform scheduled preventative maintenance and solve equipment problems to minimize downtime., • General Support: Produce accessories and perform other duties as assigned. Requirements: Qualifications • Education: High school diploma or equivalent., • Experience: 5+ years of relevant machining experience., • Technical Skills: Proficient math skills and the ability to read technical drawings or diagrammed instructions., • Interpersonal: Strong communication and interpersonal skills., • Preferred: Welding experience is highly preferred. Physical Requirements & Environment • Mobility: Frequently required to stand and walk., • Strength: Ability to lift and move up to 35 pounds., • Vision: Requires close, distance, and color vision, as well as the ability to adjust focus., • Environment: Work takes place in a factory setting with exposure to moving mechanical parts and moderate noise. Arena is an equal opportunity employer. All applicants will be considered without regard to race, color, religion, sex, orientation, national origin, veteran, or disability status.

Job DescriptionDescription: Operate Manual Vertical Mill, lathe, band saws, grinder and drill press for production and prototype work Maintain working condition of equipment, performing periodic preventative maintenance to ensure safety and proper operation of equipment Manufacture and fabrication of busswork necessary for internal production of RF induction heating systems Good mechanical and special aptitude and blue print reading skills Build & repair coils for both new and repair orders Machine parts for production runs and prototype work Incoming mechanical inspection on various out-sourced parts Assist and train employees on equipment, when necessary Authority to generate ECN’s and DMR’s Authority to stop employees from using machinery when an unsafe condition exists. Manufacture and fabrication of custom induction coil assemblies (primarily copper) . Requirements: HS Diploma Machining Certificate or equivalent Minimum 2-4 years’ experience Must be able to braze, mold, solder and have good knowledge of plumbing fittings Read and understand schematics, drawings and blueprints Interface with internal customers to fulfill customer orders Must be able to conceive and build mandrels for the manufacture of complex coils CNC programming at the machine

Job DescriptionPEKO Precision Products: We Make Products That Matter PEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: CNC Machinist Your Role: The CNC Machinist is responsible for the setup and operation of a variety of CNC machines, including horizontal and vertical mills. You will set up, operate, and manufacture products according to blueprint specifications and customer requirements. Responsibilities Included • Setup and operate various CNC mill machines, adhering to the blueprint specifications, • Conduct first piece inspection to ensure the part is free of defects and ready for the next stage of production., • Comply with all aspects of 5S, • Assist with other duties as assigned by the Manager.Reports To: Machining Manager Qualifications Basic Qualifications: • Minimum education level of High School, GED, or its equivalent, • 3+ years experience in a machine shop environment, • 3+ years experience working with mill machines Preferred Qualifications:, • Associates in Precision Machining, • Experience with multi-axis CNC milling with FANUC controls, MAZAK, or similar, • Experience in horizontal mill machinesWork Authorization: US Persons PEKO Perks:, • Competitive Total Rewards, • Tuition Reimbursement (IRS Allowable pre-tax Max), • 401K, Medical, Dental, Vision, • Flexible Spending & Health Savings Accounts, • Life, Short and Long-Term Disability, • Recognition Awards & Discretionary BenefitsOur Core Values:, • Compassion: We care about our talented and loyal PEKO family., • Safety: We are committed to providing a safe, clean, and positive workplace., • Integrity: We believe in transparency, honesty, and respect for all stakeholders., • Agility: We are dedicated to maintaining an agile and financially prudent organization., • Endurance: We foster the belief that PEKO people are resilient problem-solvers impacting the future., • Get a glimpse of why we are #PEKOProud: #PEKOProud - YouTubeOther:, • This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice., • For more available opportunities at PEKO, please visit our website:Jobs & Career Opportunities | Rochester NY | PEKO Precision Products A reasonable estimate of the compensation range for this position is $20.00 - $32.00 per hour, plus a 10% shift differential. The wage range for this role considers a wide range of factors when making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational requirements. PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. Powered by JazzHR L7Qgd8JhP4

Job DescriptionJob purpose Individual will be responsible for setting up and running a range of OD/ID grinders while maintaining production efficiencies. Must have good attention to detail and accustom to working and measuring to close tolerance and delicate parts. Responsible for maintaining work quality and doing in process inspection while maintaining our corporate values. Duties and responsibilities Must be able to perform multiple setups in a workday and operate NC/CNC grinders • Run multiple machines & work centers at once and maintain a high level of quality, • Make machine tool offsets as needed to maintain a high level of quality, • Create and edit programs as required, • Be cross trained on other machine tools as needed to assist production, • Perform basic machine maintenance such as changing fluids and filters, • Maintain a clean work environment and machine work area, • Must be able to maintain tight engineering tolerances per drawing specifications & procedures, • Perform in process inspections using various gauges and/or CMM, • Ensure quality plan and standards are completed and verified, • Troubleshoot jobs in progress when problems occur, • Work independently with minimal direction and be able to meet deadlines, • Provide support for part preparation for next steps in WIP, • Perform other duties as assigned Qualifications • High school diploma or GED/Technical Training Certificate/Equivalent experience, • Work experience: 3-5 years in manufacturing environment running NC/CNC grinders, • Ability to read blue prints with some knowledge of GD&T, • Understanding of Mathematical Calculations and Comprehension, • High competency using micrometers, indicators, calipers, • Could require intermittent long periods of sitting, standing and/or walking, • Periodic lifting of materials not to exceed 40 pounds, • Willing to work beyond normal hours if needed, • Subject to stressful situations, • An understanding of both Metric and English measuring systems, • Able to work in a team environment, • Knowledge of Fanuc Controls a plus, • Knowledge of Okamoto/Studer a plus, • Excellent communication and interpersonal skills Working conditions • Generally working in production environment., • Required exposure to industrial oils, coolants, solvents, lubricants, adhesive and other chemicals. NOTE: All safety precautions will be used., • Requirement for some independent actions and/or decisions is expected., • Some repetitive motion required on occasion. Physical requirements • Required daily: periodic lifting of materials and parts weighing up to 40 lbs., • Required intermittent long periods sitting and standing. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. #ROC B Shift: Mon-Thurs: 2:45pm-12:15am Fri: 2:45pm-6:45pm

Job DescriptionDescription: CNC Machinist (2nd Shift) We are seeking a skilled and detail-oriented CNC Machinist to join our manufacturing team on the 2nd shift. This is an excellent opportunity for experienced professionals who are committed to precision and quality in a dynamic production environment. If you have a strong background in CNC machining and are looking to contribute to a growing company, we encourage you to apply. Key Responsibilities: • Set up, operate, and maintain CNC machines to produce high-quality parts according to specifications, • Read and interpret technical drawings, blueprints, and work orders to determine machining requirements, • Monitor machine operations to ensure proper functioning and troubleshoot issues as they arise, • Perform routine inspections and measurements to verify part dimensions and quality, • Maintain a clean and safe work environment, adhering to all safety protocols and procedures, • Document production data and report any discrepancies or machine malfunctions to supervisors, • Assist in tooling changes and machine adjustments to optimize efficiency and accuracy Skills and Qualifications: • Proven experience as a CNC Machinist or similar role in a manufacturing setting, • Proficiency with CNC programming and machine operation, • Ability to read and interpret technical drawings and specifications, • Strong attention to detail and commitment to quality, • Good problem-solving skills and ability to troubleshoot machine issues, • Knowledge of safety standards and best practices in manufacturing, • Ability to work independently and as part of a team, • High school diploma or equivalent; technical training or certification is a plus Join our team and be part of a company that values craftsmanship, innovation, and continuous improvement. We offer competitive wages, comprehensive benefits, and opportunities for career growth in a supportive work environment. Requirements:

Job Description CNC MACHINIST - A SHIFT Advantech Industries, Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. We are currently seeking an individual to collaborate with us as a CNC Machinist. The CNC Machinist is responsible for the set up and observation of machines to verify the accuracy of the machine settings and to detect malfunctions or out-of-tolerance machining, by using precision measuring instruments such as micrometers and calipers. Additionally, the CNC Machinist is responsible for the setup and controlled operation of computerized deburring and tooling machines to perform a variety of machining operations, which include drilling, chamfering, and deburring. DUTIES & RESPONSIBILITIES • Sets up machine and observes machine operation to verify accuracy of machine settings and to detect malfunctions or out-of-tolerance machining, using precision measuring instruments such as micrometer and caliper., • Sets up and controls operation of computerized deburring and tooling machine to perform series of machining operations, such as drilling, chamfering, and deburring., • Inspects "first part" and inspects work pieces throughout the production run for out-of-tolerance machining., • Clean machine and work area., • Provide aid and guidance to machine operators with less experience or skill. SKILLS & QUALIFICATIONS • With limited supervision and quality work ethic, functions as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved, • Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes, • Maintains adequate levels of performance and motivation despite job tasks that are routine, repetitive, and/or non-stimulating, • Ability to understand and carry out oral and written directives, • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible, • Thorough operational knowledge and skills of specific CNC mills and CNC lathes to be operated with the ability to calculate and set machine controls either manually or by entering commands, • Ability to operate assigned equipment safely and efficiently, • Ability to keep record of time spent and material used, • Ability to use precision measuring tools and equipment, read drawings and blueprints, and be familiar with common machine and measuring tools, including micrometers and calipers, • Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals, • A HS Diploma or GED, • 5 years of previous CNC setup and operation experience, • Experience on Mazak or Haas Machines preferred, • Alignment with the requirements and principles of the Advantech Quality Management System and ISO 9001: 2015, • Capacity to handle changes in business operations and adjust to new situations, • Preparedness to stand for extended periods, life heavy items, and operate equipment JOB BENEFITS • Vacation, • Sick Days, • Holidays, • Health Insurance, • Dental Insurance, • Vision Insurance, • Life Insurance, • Voluntary Disability Insurance, • 401(k) Plan with Company Match According to the New York Pay Transparency law, pay range for this job is $23.00 - $37.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodation for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources. Monday through Friday 7:30 am to 4:00 pm Full time employment (39.75 hours per week)

Job Description CNC Machinist – West Henrietta, NY Hours: Mon–Fri | 7:00 AM – 3:30 PM Pay: $23.00 – $34.00/hour (depending on experience) + bonus Overview We’re looking for an experienced CNC Machinist with strong Swiss lathe expertise to handle both prototype and production work. You’ll program and run Tsugami Swiss Lathes, CNC lathes, and mills—owning jobs from setup through completion. What You’ll Do • Program and operate Tsugami Swiss Lathes, CNC mills, and lathes, • Machine precision parts to tight tolerances (< 0.0001”), • Read blueprints and determine tooling, speeds, and setups, • Handle prototype work with minimal supervision, • Inspect parts and maintain quality standards, • Support process improvements and train others as needed What You Bring • 5+ years Swiss lathe machining experience (Tsugami preferred), • 2+ years CNC programming (Mastercam, PartMaker), • Strong blueprint reading and advanced math skills, • Experience with tight-tolerance machining and prototype work, • Detail-oriented, self-driven, and safety-focused Be part of a team focused on precision, innovation, and meaningful impact—where your skills make a difference every day. Apply now for immediate consideration for this Machinist role in West Henrietta, NY. We look forward to connecting with you! Company DescriptionKelly helps companies recruit and manage skilled workers and helps job seekers find great work in industries such as accounting and finance, education, engineering, government, manufacturing and production, technology, and more. Since inventing the staffing industry in 1946, we’ve become experts in the many specialties and local and global markets we serve. With a network of suppliers and partners around the world, we connect 450,000+ people with work every year. We ensure companies have the people they need, when and where they’re needed most. Kelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California’s state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S.Kelly helps companies recruit and manage skilled workers and helps job seekers find great work in industries such as accounting and finance, education, engineering, government, manufacturing and production, technology, and more.\r\n\r\nSince inventing the staffing industry in 1946, we’ve become experts in the many specialties and local and global markets we serve. With a network of suppliers and partners around the world, we connect 450,000+ people with work every year. We ensure companies have the people they need, when and where they’re needed most.\r\n\r\nKelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California’s state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S.

Job Description JOB SUMMARY Under the direct supervision of the Quality Director, the Quality In-Process Inspector is responsible for assuring production parts are inspected by the machine operators in compliance with the frequency and methods determined by the IPR and the Quality Team. This is accomplished by travelling throughout the shop and working closely with the machine operators, supervisors, and plant manager to assure that the customer quality requirements are met. ESSENTIAL FUNCTIONS Requirements of this position include, but are not limited to: • Promote and support the requirements and principles of the Precise Quality Management System and AS9100., • Auditing of all jobs currently running on the shop floor to assure that all IPR`s and QCR`s are completed by the machinists as required per the job traveler and customer requirements., • The ability to assist the machinist with the measurement of parts per the QCR and IPR., • Understanding of measurement equipment used to verify parts are meeting the quality requirements / drawings., • Ability to run pre-programmed parts on the CMM for auditing purposes., • High level of integrity to be the “voice of the customer”., • Visual inspection of machined parts to customer requirements (deburred properly)., • Communicate with all departments pertaining to quality issues. KNOWLEDGE, SKILLS, AND ABILITIES • Basic understanding of the AS9100D Quality Management System., • Attention to detail is required., • Basic blueprint reading and understanding of work instructions per job requirements., • Use of standard Quality measurement tools such as calipers, micrometer, and dial indicators., • Communication skills are of an up most importance. Being able to communicate inspection results effectively is a must for this position., • Above average math skills a plus. EDUCATION AND EXPERIENCE • High School Diploma., • Minimum 5 years of experience working in Quality preferred., • Understanding of work instructions., • Machining experience a plus., • Minimum 5 years of experience in the metal industry and or parts manufacturing industry preferred. JOB BENEFITS • Vacation, • Sick Days, • Holidays, • Health Insurance, • Dental Insurance, • Vision Insurance, • Life Insurance, • Voluntary Disability Insurance, • 401(k) Plan with Company Match According to the New York Pay Transparency law, pay range for this job is $20.00 - $29.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Precise Tool & Manufacturing Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Gender/Sexual Orientation/Gender Identity/Religion/National Origin/Disability/Veteran Precise Tool & Manufacturing Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodation for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources at (585) 247-0700 Ext. 203.

Job DescriptionDescription: Position Summary: Responsible for operating CNC equipment and using proper measuring equipment to verify quality of the product. What We Offer • Competitive salary based on experience, • Career development opportunities, • Climate-controlled work environment, • State-of-the-art machinery and equipment Benefits: • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insurance Requirements: Duties and Responsibilities: • Read blueprints and check part dimensions with appropriate measuring instruments, • Make adjustments on tool offsets, • Understand company procedures for tagging, inspecting and other necessary procedures relevant to the position, • Follow lean manufacturing systems in place Qualification Requirements: • 1-3 years’ experience in machining in corresponding department, • Perform in-process inspection on machined parts, • Work with supervisor and quality department to ensure parts are made to customer specifications, • Ensure all tools and gages used are properly calibrated and up to date, • Observe all safety practices and procedures, performing preventative maintenance, • Follow strict safety procedures in maintaining a neat and orderly workstation, • Must be able to be flexible and work overtime when necessary Environment & Physical Demands • Regularly required to stand, walk, stoop, kneel, crouch, and communicate effectively (talk/hear)., • May involve prolonged periods of both sitting and standing depending on task requirements., • Specific vision abilities include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus; prolonged magnified inspection may be required, which can lead to eye strain., • Requires good hand-eye coordination and dexterity in hands, arms, and fingers, including the ability to grasp and manipulate small components., • Frequent use of computers and other standard office or manufacturing equipment., • May involve handling of oils, solvents, and cleaning solutions—lab coats provided to minimize exposure., • Typically performed in a clean environment; employees are expected to help maintain cleanliness standards., • Safety glasses are required at all times; additional safety training may be required depending on the area., • The work is performed in a manufacturing setting where noise levels are generally loud., • May rotate between different workstations or shift tasks during the production process based on operational needs.

Job Description CNC Lathe Machinist - A Shift Location: Brinkman Precision Inc./West Henrietta, NY Job Type: Full-Time Shift: B Shift Pay: $20.00 to $40.00/hr. based on experience Benefits: Health, Dental, Vision, 401(k), PTO, Paid Holidays, and more About Us: At Brinkman Precision, Inc., we specialize in high-precision machining for industries such as aerospace, medical, defense, and industrial manufacturing. With a reputation for quality and innovation, we are committed to delivering exceptional parts and service to our clients. We are currently seeking an experienced CNC Lathe Machinist to join our growing team. Job Responsibilities: • Set up, operate, and maintain CNC lathes to produce precision components according to blueprints and specifications, • Perform tool changes, offset adjustments, and minor programming edits as needed, • Inspect parts using calipers, micrometers, and other precision measuring tools to ensure quality, • Interpret technical drawings and machining instructions, • Troubleshoot and resolve basic machine issues, • Work with team members and engineers to meet production deadlines and quality standards Qualifications: • Minimum 3 years of experience operating CNC lathes in a precision machining environment, • Proficiency in reading and interpreting technical drawings and GD&T, • Ability to use precision measuring instruments accurately, • Attention to detail and commitment to producing high-quality work, • Ability to work independently and as part of a team, • Must be reliable Brinkman Precision, Inc. offers competitive wages and excellent benefits including: • Paid Time Off, • 401 (k) Matching, • Medical, • Dental, • Short Term Disability, • Long Term Disability, • Life Insurance, • And more! Please submit your resume with past experience listed for consideration and we appreciate your interest in our company! EOE, including disability/vets. Job Posted by ApplicantPro

About the Company Precision. Performance. Parlec. Parlec is a proud member of Techniks Tool Group, and has been a trusted name in American-made tooling solutions since 1948. We serve manufacturers across North America with innovative, productivity-boosting products designed to meet the highest standards of performance and reliability. About the Role Set up and make world class parts in an efficient manner. Must be a dependable, team player. Intermediate to advanced blueprint reading with GD&T. Must have good tooling and machining background. Set up and make world class parts in an efficient manner. Must be a dependable, team player. Responsibilities • Set up and operate any CNC horizontal and vertical mills safely and productively., • Perform first piece and in-process inspections., • Load parts into machines., • Able to work independently., • Keep area neat and clean., • Ability to resolve issues with minimal supervision., • Responsible for deburring parts and keeping them ding free. Qualifications High School Diploma or equivalent. Minimum of two years machining experience and/or training; or equivalent combination of education and experience. Required Skills • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Preferred Skills • Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists., • Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. We are committed to diversity and inclusivity.

Job Description Job summary: Perform highly diversified duties to install, troubleshoot, repair, and maintain production and facility equipment according to safety regulations. Perform building and grounds maintenance as directed. Maintain preventative maintenance systems and processes to support manufacturing. Essential Duties and Responsibilities: • Perform highly diversified duties to install and maintain various types of equipment throughout facility., • Provide emergency/unscheduled repairs of production equipment during production and performs scheduled maintenance repairs of production equipment during machine service., • Perform mechanic skills including, but not limited to, mechanical, electrical, troubleshooting, inspection, and repair of machines., • Read and interpret equipment manuals and work orders to perform required maintenance and service., • Tracks and documents all equipment preventative maintenance and repair., • Responsible for determining and tracking inventory for all spare maintenance parts., • Troubleshoot, repair, maintain, install, and perform testing activities on various computer equipment, peripherals, data communication., • Assist on production floor with material handling, repairs, and maintenance., • Provide contractor support., • Preform Simple Machinist duties and responsibilities. Additional Responsibilities: • Conduct tow motor training., • Perform and document regularly scheduled safety checks on tow motors, eyewash stations, and fire extinguishers., • When requested, may work on special projects and various related assignments., • Performs other related duties and assignments as required. Physical Demands and Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. Must be able to stand for long periods of time. The employee is occasionally required to reach with hands and arms. The employee is required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 50 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from low to moderate. Education, Skills and Experience: • High school diploma/GED required., • Experience in building, grounds, and machine maintenance, • Ability to use Excel, Word, and Outlook, • Good communication skills., • Strong knowledge of electrical/electronic practices., • Work independently with minimal supervision.

CNC Lathe Machinist - A & B Shifts Location: Brinkman Precision Inc./West Henrietta, NY Job Type: Full-Time Shift: A & B Shifts Pay: $20.00 to $35.00/hr. based on experience Benefits: Health, Dental, Vision, 401(k), PTO, Paid Holidays, and more We are continuing to grow and in need of CNC Lathe Machinist!!!! About Us: At Brinkman Precision, Inc., we specialize in high-precision machining for industries such as aerospace, medical, defense, and industrial manufacturing. With a reputation for quality and innovation, we are committed to delivering exceptional parts and service to our clients. We are currently seeking an experienced CNC Lathe Machinist to join our growing team. Job Responsibilities: • Set up, operate, and maintain CNC lathes to produce precision components according to blueprints and specifications, • Perform tool changes, offset adjustments, and minor programming edits as needed, • Inspect parts using calipers, micrometers, and other precision measuring tools to ensure quality, • Interpret technical drawings and machining instructions, • Troubleshoot and resolve basic machine issues, • Work with team members and engineers to meet production deadlines and quality standards Qualifications: • Minimum 3 years of experience operating CNC lathes in a precision machining environment, • Proficiency in reading and interpreting technical drawings and GD&T, • Ability to use precision measuring instruments accurately, • Attention to detail and commitment to producing high-quality work, • Ability to work independently and as part of a team, • Must be reliable Brinkman Precision, Inc. offers competitive wages and excellent benefits including: • Paid Time Off, • 401 (k) Matching, • Medical, • Dental, • Short Term Disability, • Long Term Disability, • Life Insurance, • And more! Please submit your resume with past experience listed for consideration and we appreciate your interest in our company! EOE, including disability/vets.

Machinist Job Duties: Review samples, drawings or instructions to understand specifications of output Take measurements and mark material for cutting or shaping Plan the sequence of nece

As a Machinist Trainee, you will be responsible for working within the framework of a team and performing the following activities: Learn the required skills to work within the Pilot Metals Development team Follow safety rules, manufacturing instructions, work rules and other manufacturing guideline

As a Machinist Trainee, you will be responsible for working within the framework of a team and performing the following activities: Learn the required skills to work within the Pilot Metals Development team Follow safety rules, manufacturing instructions, work rules and other manufacturing guideline

As a Machinist Trainee, you will be responsible for working within the framework of a team and performing the following activities: Learn the required skills to work within the Pilot Metals Development team Follow safety rules, manufacturing instructions, work rules and other manufacturing guideline

Dover - - Responsibilities: Set up and operate numerically controlled machines to perform machining operations; Identify proper tooling and checks instrumentation according to process sheets; Review program to ensure consistency with print; Inspect first-run piece and spot-check subsequent pieces f

CNC Machinist III, are highly skilled professionals responsible for advanced machining operations, mentoring others, and contributing to technical problem-solving and continuous improvement initiatives. Mentor and train junior machinists, supporting skill development and team knowledge transfer.

This position is suited for a seasoned machinist who thrives in a technical, hands-on environment and takes ownership of complex parts from concept through completion. CNC PROGRAMMER/MILL MACHINIST DAY SHIFT (7AM-3:30PM) Capital Region Fusco Personnel is searching for a Senior CNC Milling Specialist

Thermo Fisher Scientific - - Responsibilities: Fill customer orders by obtaining material from designated picking bays and fill out proper paperwork by indicating quantities being picked; Move orders to staging area and consolidate for ease of repacking and stretch wrapping; Prepare merchandise for

Aerotek - - Responsibilities: Load, unload, and transport materials within the plant, yard, and designated work areas; Operate forklifts and other material handling equipment safely and efficiently; Use MRP system and WMS software to track inventory movement and update material records; Read work o

Alro Steel - - Responsibilities: Fill and prepare material orders for shipment; Operate overhead cranes, forklifts, metal saws, shears, and lasers; Contribute to safe and efficient customer service by following training; Maintain accuracy in order fulfillment.

Alro Steel - - Responsibilities: Fill and prepare material orders for shipment; Operate overhead cranes, forklifts, metal saws, shears, and lasers; Contribute to customer service mission in a safe and efficient manner; Participate in extensive upfront training and ongoing mentoring; Collaborate in

Thermo Fisher Scientific - - Responsibilities: Perform all required Warehouse transactions in SAP and RF units; Promptly move finished goods material to stock locations; Verify production move tickets for quantities, descriptions, and catalog numbers; Fill Drop List for Shipping Pick List and fill

Thermo Fisher Scientific - - Responsibilities: Performs all required Warehouse transactions in the SAP operating system on PC's and Tecklogix Radio Frequency (RF) units; Promptly moves all finished goods material from designated areas to stock locations in the Warehouse; Verifies production move ti

Nesco Resource - - Responsibilities: Operate manufacturing equipment in slide production processes; Perform visual and tool-based inspections to ensure product quality; Follow all standard operating procedures (SOPs) and regulatory requirements; Collaborate with maintenance and engineering to reduc

Axelon Services Corporation - - Responsibilities: Assemble components or finished products using tools and machinery.Inspect assembled items to ensure they meet quality specifications.Follow safety and operational guidelines at all times.